USB Plus
(Go to page 8)
DVD/CD RECEIVER
OWNER’S MANUAL
XTS & XTS Pro
Model : HT302SD, HT302SD-A8
SH32SD-SZ, SH32SD-WZ
(Go to page 15)
Virtual Sound
(Go to page 15)
FM & AM Tuner Function
USBplus
(Go to page 19)
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
P/No. : MFL62665902(00)
Dear Customer
Thank You for Purchasing the LG DVD Player. After going through the instruction manual , you will be able to enjoy all the
features and functions of the Product .
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future reference.
Shall the unit require maintenance, contact an authorized
service center.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVECOVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER
S E R V I C I N G T O Q U A L I F I E D S E R V I C E
PERSONNEL.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk ofelectric shock topersons.
To prevent direct exposure to laser beam, do not try to
open the enclosure. Visible laser radiation when open.
DONOT STARE INTOBEAM.
CAUTION : The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
CAUTION : concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit ; That is, a single outlet circuit which
powers only that appliance and has no additional outlets or
branch circuits. Check the specification page of this owner's
manual tobecertain.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized service center.
WARNING : Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install
in accordance with the manufacturer's instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product
and toprotect itfromover heating.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
The openings should be never be blocked by placing the
product on a bed, sofa, rug or other similar surface. This
product should not be placed in a built-in installation such
as
a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instruction has been
adhered to.
To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is
easily accessible.
Note: The marking of product shall be on the
exterior of the apparatus.
3
Welcome to your new DVD Receiver
Contents
Introduction ................................................................................. 5
Maintenance & Service ............................................................... 5
Main Unit ..................................................................................... 6
Remote Control ........................................................................... 7
Hooking up the Unit (Audio & Video) .......................................... 8
USB Equipment Connection ....................................................... 8
Antenna Connection ................................................................... 9
5.1 Channel Speaker System Configuration .............................. 9
Initial Settings .............................................................................10
Language ...................................................................................10
Display ....................................................................................... 10
Audio ......................................................................................... 11
Lock (Parental Control) ............................................................. 11
Others ....................................................................................... 14
Displaying Disc Information ....................................................... 12
Operations ................................................................................. 13
Equalizer Effect ......................................................................... 15
XTS/XTS Pro ............................................................................. 15
Virtual Sound ............................................................................ 15
Sound Mode ............................................................................. 15
Other Operations ...................................................................... 15
Playing a Disc or File ................................................................ 16
Playing a DivX Movie File ......................................................... 17
Programmed Playback .............................................................. 18
Viewing a JPEG File ................................................................. 18
Listening to Music from External Device ................................... 19
Presetting the Radio Stations ................................................... 19
Listening to the Radio .............................................................. 19
Using an USB Device ............................................................... 20
Types of Playable Discs ........................................................... 21
Troubleshooting .................................................................. 12~13
Language Codes ...................................................................... 22
Area Codes ............................................................................... 22
Specifications ........................................................................... 22
4
Before Use
It is recommended to remove any disc from
the player while moving the set
CD-G
CD-G Discs
/CD Receiver
" Always keep a disc inside the Receiver to prevent
optical lens damage due to dust "
5
Front Panel/Rear Panel
Connect a microphone to MIC Port.
6
EQ
EQ
You Can Choose 8 Fixed
Sound Impressions.
7
Audio In connection
Hooking up the unit
Connect jacks on the unit and your TV (DVD
player or Digital Device etc.) using the cables.
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
UT
INP
AU
X IN
L
Check the jacks of your TV, and choose the
,
audio). If your TV has only
one output for audio (mono),
R
or
connection. Picture quality improves
(
connect it to the left white
audio jack on the unit.
)
to
in order from
.
(B)
AM FM connection
FM
Pb
AM - Connect the AM loop
aerial to the DVD receiver.
FM - Connect the FM aerial.
The reception will be its best
when the two loose ends of
the aerial are in a straight and
horizontal line.
Pr
(A)
OUTPUT
AUDIO OUT
USB Equipment Connection
Connect the USB port of a USB Memory (or
MP3 player, etc.) to the USB port on the front
of the unit.
B
A
C
Removing the USB Device from the unit
1. Choose a different function mode or press
STOP(I) twice in a row.
2. Remove the USB device from the unit.
Notes:
Video Out connection
•
Don’t extract the USB device while
operating.
Connect the VIDEO
•
Music files (MP3/WMA), image files
(JPEG) and Video files (.avi) can be
played.
OUTPUT(MONITOR) jack on
the unit to the corresponding
input jack on your TV using a
Video cable.
•
This unit can not use a USB HUB.
Component Video connection
Connect the COMPONENT
VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on
the unit to the corresponding
input jacks on your TV using
a Y PB PR cable.
8
Antenna Connection
Function Selection
Connect the supplied FM/AM antenna for listening to
the radio.
You can select the different functions by
pressing the different function keys in the remote as
follows:
•
Connect the AM Loop aerial to the AM aerial
connector.
Band (for FM & AM), DVD/CD, AUX, USB)
•
Connect the FM Wire aerial to the FM aerial
connector.
Speaker System Connection
Notes:
•
Connect the speaker cords to the speaker terminals.
To obtain the best possible surround sound, adjust
the speaker parameters (volume, distance, etc.).
To prevent noise pickup, keep the AM Loop aerial
away from the DVD/CD Receiver and other
components.
Be sure to fully extend the FM wire aerial.
• Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and–
to –. If the cables are reversed, the sound will be
distorted and will lack base.
•
•
After connecting the FM Wire aerial, keep it as
horizontal as possible.
• If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid excessive
output on the speakers.
AM Loop Antenna
(Supplied)
FM Wire Antenna
(Supplied)
INPUT
AUX IN
L
R
5.1 Channel Speaker System
Configuration
Assuming you are centered in the middle of your couch,
facing your TV display and center-channel speaker
at 0 degree, then your left and right main front speakers
should be within a 22 to 30 degree angle to each
side, viewed from your seat.
Be careful of the following
Be careful to make sure children do not put their
hands or any objects into the *speaker duct.
The main left and right surrounds should be to the
respective sides of the listening area, above ear level if
possible (ideally 2 feet or more) at an angle of 90
to 110 degrees from the front center.
*Speaker duct: A hall for plentiful bass sound
on speaker cabinet(enclosure).Use the rear
speaker at least 30 CM away from either TV
screen or PC monitor.
9
Initial Settings
AUDIO
5.1 Speaker Setup
Select
On
AUDIO
DRC
5.1 Speaker Setup
Select
On
Vocal
AUDIO
On
DRC
Vocal
On
Speaker
Size
Front L
Small
o
Volume
Distance
Test
dB
o
m(ft)
Move
Select
off
Prev.
Enter
First Level
Move
Return
Select
Second Level
Third Level
Initial Settings
b
9 to 15.
23
-Refer to the turn ON/OFFsubtitle.
DISPLAY
D
I
S
P
L
A Y
TV Aspect
16 : 9
Display Mode
Widescreen
Off
Progressive Scan
Move
Select
c
b
a
LANGUAGE
a
OSD
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
German
Italian
Dutch
b
Enter
Prev.
Move
LANGUAGE
black
LANGUAGE
OSD
English
Disc Audio
Disc Subtitle
Disc Menu
Orignal
Off
Original
c
Progressive Scan
Move
Select
Progressive Scan Video provides the highest
quality pictures with less flickering.
If you are using the COMPONENT VIDEO
OUT jacks, but are connecting the receiver to a
standard (analog) television, set Progressive
Scan toOff.
b
a
a
OSD
10
Note:
If you are using the Component Video jacks for
connection to TV or monitor that is
compatible with a progressive scan signal, set
Progressive Scan toOn.
ToTurnONprogressive scan:
Certain speaker settings are prohibited by the
DolbyDigital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press ƒ/„to adjust the output level of the selected
speaker. (-5dB ~5dB)
Distance
a
Connect component out of the DVD/CD
Receiver to the input of your monitor
/
television, set your television or monitor to
Component Input.
If you connected speakers to your DVD/CD
Receiver, setting the Distance lets the speakers
know how far the sound has to travel to reach your
set listening point. This allows the sound from each
speaker toreach the listener atthe same time.
1. Select “Progressive Scan” on the DISPLAY
menu then press „
.
Select “On” using the /‚buttons.
Pressing ENTER will set the player to
Progressive scan mode.
2.
3.
Press ƒ/„
to adjust the Distance of the selected
Caution:
speaker.(You can’t adjust front/Wooferspeakers)
Test
Press ƒ/„to test the signals of each speaker.
Adjust the volume to match the volume of test
signals memorized in the system.
Once the setting for progressive scan output is
entered, an image will only be visible on a
progressive scan compatible TV or monitor. If
you set Progressive Scan to On in error, you
must reset the unit. First, remove the disc in the
DVD/CD Receiver. Next, press STOP on the
Front Left (L) →C en t →erF r o nRit g h( tR)→
Rea r Ri g h t
( R)
→ Rea r L ef
t
( L )
→
remote control(¢
) and hold it for five seconds
b
before releasing it. The video output will be
restored to the standard setting, and a picture
will once again be visible on a conventional
analog TVor monitor
With the DVD*1 format, you can hear a program’s
sound track in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between
the loudest sounds and the quietest ones). Then,
you may listen to a movie at a lower volume without
losing clarity ofsound. SetDRC toOnforthis effect.
*1:Dolby Digital only
AUDIO
a
b
c
AUDIO
5.1 Speaker Setup
Select
On
DRC
Vocal
On
LOCK(Parental Control)
a
LOCK
Move
Select
Rating
Unlock
IN
Password
Area Code
c
a
5.1 Speaker Setup
Make the following settings for the built-in 5.1
channel surround decoder.
Move
Select
1. Press ENTER and 5.1 Speaker Setup menu
appears.
c
b
a
2. Use ƒ/„toselect the desired speaker.
3. Adjust options using /‚/ƒ/„buttons.
4. Press ENTER to confirm your selection.
Returns tothe previous menu.
Speaker Selection
Speaker selection Select a speaker that you want
to adjust. [Front speaker (Front L), Front speaker
(Front R), Center Speaker (Center), Subwoofer
(SubWoofer), Rear speaker (Rear L), Rear
speaker (Rear R)]
Continued on page No. 15
11
Displaying Disc Information on-screen
Displaying Disc Information -
more you can do
You can select an item by pressing
Symptom
No power
Cause
The power cord is disconnected.
No disc is inserted.
The power is on, but the DVD/CD
Receiver does not work.
No Picture
The TV is not set to receive DVD signal output.
The vidio cable is not connected securely.
The connected TV power is turned off.
There is no sound or only a very low - The equipment connected with the audio cable is not set to receive DVD signal output
level sound is heard.
The audio cables are not connected securely.
The Power of the equipment connected with the audio cable is turned off.
The audio connecting cable is damaged.
The disc is dirty.
The Playback picture is poor.
The DVD/CD Receiver does not start
playback.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed unside down.
The disc is not Placed within the guide.
The disc is dirty.
A menu is on the TV screen.
The Rating level is set.
The disc is dirty.
The speakers and components are connected poorly.
Loud hum or noise is heard.
The DVD/CD Receiver is located too close to the TV.
Radio Stations cannot be tuned in.
The antenna is positioned or connected poorly.
The signal strength of the stations is too weak (when tuning in with automatic tuning).
No stations have been preset or preset stations have been cleared (when tuning by
scanning preset stations).
The Remote control does not work
properly
The remote control is not pointed at the remote sensor of the DVD/CD Receiver.
The remote control is too far from the DVD/CD Receiver.
There is an obstacle in the path of the remote control and the DVD/CD Receiver.
The batteries in the remote control are flat.
Nothing is displayed on the front panel display.
The front panel display is too dim.
12
General features
DVD, Divx disc: 6 steps, Video CD: 5 steps, MP3, WMA, Audio CD, 3 steps
Press to move backwards in the menu or exit the menu.
RETURN (
)
During playback, press REPEAT A-B to select a point A and a point B and repeats
a sequence from point A(Starting point) to point B (End point).
REPEAT A-B
SLOW
In the pause mode, press SLOW (7or 8) to select required speed.
DVD : (1/2, 1/4, 1/8, 1/16) or (1/2,1/4,1/8,1/16)
Video CD : (1/2, 1/4, 1/8, 1/16)
Correction
Plug the power cord securely into the wall outlet.
Insert a disc. (Cleck that the DVD or, audio CD Indicator in the DVD display is lit.)
Connect the video cables securely to both the TV and DVD Receiver.
Select the appropriate video input mode on the TV so the picture from the DVD/CD Receiver appears on the TV Screen.
Connect the video cable into the jacks securely.
Turn on the TV.
Select the Correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver.
Connect the audio cable into the jacks securely.
Turn on the equipment connected with the audio cable.
Replace it with new one.
Clean the Disc.
Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.)
Insert a playable disc. (Check the disc type, colour system and Regional code.)
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
Press the SETUP button to turn off the menu screen.
Cancel the Rating function or change the rating level.
Clean the disc.
Connect the Speakers and components securely.
Move your TV away from the audio components.
Connect the antenna securely
Adjust the antennas and connect an external antenna if necessary.
Tune in the station manually.
Preset the stations (page 19).
Point the remote control at the remote sensor of the DVD/CD Receiver.
Use the remote control within about 23 ft (7 m).
Remove the obstacle.
Replace the batteries with new ones.
Press DIMMER on the remote control.
13
a
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played in the same
way as Audio CDs.
b
b
four digit
c
c
Semi Karoake
When a chapter/ title / track is fully finished , this
function shows the score in the screen with a fanfare
sound.
23
Semi Karaoke on :
-
Turn the “Semi Karaoke” function on.
When you finished singing a score will appear on
the screen.
on page No 10
Semi Karaoke off :
-
Turn the “Semi Karaoke” function off. Fanfare and
score do not appears on the screen
Available discs for the Semi Karaoke function:
• DVD discs
OTHERS
a
•
•
DVD Karaoke Discs
VCD discs with more than 2 tracks
OTHERS
Notes :
PBC
On
•
•
This function operate on the DVD/CD mode.
The Semi Karaoke function is available only when
a micro phone is connected.
DivX(R) Registration
Semi Karoake
Select
On
•
Watching movies, “off ” the Semi Karaoke or enjoy
it without connecting the MIC at the SETUP menu if
the fanfare or score appears during changing a
chapter.
Move
Select
c
b
14
EQUALIZER EFFECT
You can choose 8 fixed sound impressions and adjust
the Bass, MIDDLE and TREBLE.
- You can select a desired sound mode by using EQ
button on the remote control.
When you want to change a sound mode press the
EQ button repeatedly with in 3 seconds.
Each time you press the button the setting changes
in the display window as shown below.
NORMAL (NORMAL) à
India (INDIA) à
USr EQ (User EQ) à
POP (POP) àCLASS
(CLASSIC) àROCK (ROCK) àDRAMA (DRAMA) àJAZZ (JAZZ) àNORMAL (NORMAL)...
- You can set the BASS, Middle and TREBLE on the
USER EQ mode.
1. Select the USER EQ moby using EQ button."USr EQ
(USER EQ)" will be displayed in the display window.
2. Press the ENTER button on the remote control when
"USr EQ (USER EQ )" is displayed in the display
window. "U_B0 (BASS 0 )" will be displayed in the
display window.
3. Select the BASS, MIDDLE OR TREBLE on you want
by pressing the TUN. (-/+) buttons on the remote control.
4. Press the PRESET (-/+) button on th remote control
to set the sound level you want. (-5~+ 5, MAX steps)
5- Repeat the 3-4 steps as above.
6- When the sound level is completed, press the
ENTER button on the remote control.
Other operations
Sleep Timer Setting
You can set the DVD/CD Receiver to turn off
automatically at a specified time.
1. Press SLEEP to set the desired sleep time.
The SL indicator and the sleep time appears in
the display window.
2. Each time you press SLEEP the setting
SL180 →150 1→20→90 8→0 7→0 6→0→50 4→0
→30→20 1→0 O→FF
DIMMER
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMERrepeatedly.
Screen Saver
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
System Select
You must select an appropriate system mode for
your TV system. If NO DISC appears in the display
window, press and hold P./STEPon the front panel or
remote control for more than 5 seconds to be able to
select a system(PAL, NTSC or AUTO).
•
When the selected system is not compatible with
the system of your TV, normal colour picture may
not be displayed.
NTSC : Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL : Select when DVD/CD Receiver is connected
with PAL-TV.
AUTO : Select when DVD/CD Receiver is connected
with Multi systemTV.
15
Press REPEAT key repeatedly, and the current title, chapter or all tracks will be played back
repeatedly. To return to normal playback, press REPEAT repeatedly.
Selecting a subtitle language
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle language.
Slow down the playing speed
While playback is paused, press SCAN
VCD
MP3
1.5 speed playback
You can quickly enjoy a music and movie. The 1.5 speed allows you to watch the pictures and listen to
thesound quicker thanplaying ata normal speed on thedisc.
1. Press the PLAY button during the normal play back. The screen will appear at 1.5 speed with
sound .
2. Toreturntothenormal PLAY, pressPLAY.
Note :
This receiver does not memorize the scene of a disc if youswitch off the receiver before commencing
toplay thedisc.
16
When playing a mixed disc or USB Flash Drive containing with DivX, MP3/ WMA and JPEG files together,
you can select menu of files which you would like to play by pressing Title key. If "This file has the
non-supported type on the Player" pops up, then press Enter key to come back
17
18
19
Using an USB device
-
1 Connect the USB device to the USB port of the unit.
2. Select the USB function
USB
3 Select a file you want to play
BAND / DVD / AUX
Compatible USB Devices
•
•
•
MP3 Player : Flash type MP3 player.
USB Flash Drive : Devices that support USB2.0 or USB1.1.
The USB function of this unit does not support all USB devices.
USB device requirement
•
Devices which require additional program installation when you have connected it to a
computer, are not supported.
Look out for the follows.
•
•
Do not extract the USB device while in operation.
For a large capacity USB, it may take longer than a few minute to be searched
• To prevent data loss, back up all data.
•
•
•
•
•
If you use a USB extension cable or USB hub, the USB device is not recognized.
Using NTFS file system is not supported. (Only FAT(16/32) file system is supported.
This unit is not supported when the total number of files is 1000 or more.
External HDD, Card readers, Locked devices, or hard type usb devices are not supported.
USB port of the unit cannot be connected to PC. The unit can not be used as
a storage device.
•
Digital Cameras & Mobile Phones are not supported.
20
About the Symbol Display
’ may appear on your TV display during operation and
‘
indicates that the function explained in this owner’s
manualisnotavailableonthatspecificDVDvideodisc.
Do not attach any seal or label to either side (the labeled side or the recorded
side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shapedor octagonal). It may
result in malfunctions.
RegionalCodes
This unit has a regional code printed on the rear of the unit. This unit
can play only DVDdiscs labeled same as the rear of the unit or “ALL”.
•
Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This number
must match your unit’s regional code or the disc
cannot play.
•
If you try to play a DVD with a different regional code
from your player, the message “Check Regional
Code” appears on theTVscreen.
Manufactured under license from Dolby
Laboratories.“Dolby”, “Pro Logic”, and the double-D
symbol are trade marks of Dolby Laboratories.
Confidential Unpublished works. Copyright 1992-1997
Dolby Laboratories. Allrightsreserved.
Manufactured under license from Digital Theater
Systems,Inc. U.S. Pat. No’s. 5,451,942; 5,956,674;
5,974,380;5,978,762; 6,226,616; 6,487,535 and other
U.S. and world-wide patents issued and pending. "DTS"
and "DTS DigitalSurround” are registered trademarks of
Digital TheaterSystems, Inc. Copyright 1996, 2003
DigitalTheaterSystems, Inc. AllRightsReserved."
Note: This player does not support all MP4 formats.
21
Power Supply
Refer to main label
Refer to main lable
360 x 63 x 307 mm
2.4 kg
5 °C to 35 °C, Operation status: Horizontal
5 % to 85 %
Power consumption
External dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature:
Operating humidity
Tuner FM
FM Tuning Range
FM Intermediate Frequency
AM Tuning Range
AM Intermediate Frequency
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
522 - 1,620 kHz or 520 - 1,720 kHz
450 kHz
Amplifier
Stereo mode
Surround mode
Center*
45W + 45W (Rated Output Power 30W, 4? at 1 kHz, THD 10 %)
Front: 45W + 45W (Rated Output Power 30W, THD 10 %)
45W
Surround*
45W + 45W (Rated Output Power 30W, 4? at 1 kHz, THD 10 %)
Speaker
(SH32SD-SZ)
(SH32SD-WZ)
8
Frequency Response
Sound Pressure Level
160 - 20, 000 Hz
82 dB/W (1m)
45 W
65 - 1, 500 Hz
80 dB/W (1m)
75 W
90 W
150 W
98 x 101 x 105mm
0.52kg
181 x 351 x 278mm
3.4kg
* Designs and specifications are subject to change without prior notice.
22
|