LG Electronics LCD MONITOR E2211PU User Manual

OWNER’S MANUAL  
LCD MONITOR  
Please read this manual carefully before operating your set and  
retain it for future reference.  
LCD MONITOR MODEL  
E
E
2211PU  
2411PU  
Important Precautions  
This unit has been engineered and manufactured to ensure your personal safety,  
however improper use may result in potential electrical shock or fire hazards. In  
order to allow the proper operation of all safeguards incorporated in this display,  
observe the following basic rules for its installation, use, and servicing.  
On Safety  
Use only the power cord supplied with the unit. In case you use another power  
cord, make sure that it is certified by the applicable national standards if not being  
provided by the supplier. If the power cable is faulty in any way, please contact the  
manufacturer or the nearest authorized repair service provider for a replacement.  
The power supply cord is used as the main disconnection device. Ensure that the  
socket-outlet is easily accessible after installation.  
Operate the display only from a power source indicated in the specifications of this  
manual or listed on the display. If you are not sure what type of power supply you  
have in your home, consult with your dealer.  
Overloaded AC outlets and extension cords are dangerous. So are frayed power  
cords and broken plugs. They may result in a shock or fire hazard. Call your  
service technician for replacement.  
As long as this unit is connected to the AC wall outlet, it is not disconnected from  
the AC power source even if the unit is turned off.  
Do not Open the Display:  
There are no user serviceable components inside.  
There are Dangerous High Voltages inside, even when the power is OFF.  
Contact your dealer if the display is not operating properly.  
To Avoid Personal Injury :  
Do not place the display on a sloping shelf unless properly secured.  
Use only a stand recommended by the manufacturer.  
Do not drop an object on or apply impact to the product. Do not throw any toys  
or objects on the product screen.  
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:  
Always turn the display OFF if you leave the room for more than a short period  
of time. Never leave the display ON when leaving the house.  
Keep children from dropping or pushing objects into the display's cabinet  
openings. Some internal parts carry hazardous voltages.  
Do not add accessories that have not been designed for this display.  
When the display is to be left unattended for an extended period of time, unplug  
it from the wall outlet.  
In the presence of thunder and lightning, never touch the power cord and signal  
cable because it can be very dangerous. It can cause electric shock.  
1
Important Precautions  
On Installation  
Do not allow anything to rest upon or roll over the power cord, and do not place the  
display where the power cord is subject to damage.  
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,  
laundry tub, in a wet basement, or near a swimming pool.  
Displays are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.  
Place the display in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the display near or over a radiator or heat source.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
Do not press the LCD screen with your finger for a long time as this may cause  
some afterimages.  
Some dot defects may appear as Red, Green or Blue spots on the screen.  
However, this will have no impact or effect on the display performance.  
If possible, use the recommended resolution to obtain the best image quality for  
your LCD display. If used under any mode except the recommended resolution,  
some scaled or processed images may appear on the screen. However, this is  
characteristic of the fixed-resolution LCD panel.  
Leaving a fixed image on the screen for a long time may cause damage to the  
screen and cause image burn-in. Make sure to use a screen saver on the product.  
Burn-in and related problems are not covered by the warranty on this product.  
Do not shock or scratch the front and sides of the screen with metallic objects.  
Otherwise, it may cause damage to the screen.  
Make sure the panel faces forward and hold it with both hands to move. If you  
drop the product, the damaged product can cause electric shock or fire. Contact  
an authorized the service center for repair.  
Avoid high temperatures and humidity.  
For displays with glossy bezels the user should consider the placement of the  
display as the bezel may cause disturbing reflections from surrounding light and  
bright surfaces.  
2
Important Precautions  
On Cleaning  
Unplug the display before cleaning the face of the display screen.  
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display  
screen because over-spraying may cause electrical shock.  
When cleaning the product, unplug the power cord and scrub gently with a soft  
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other  
liquids directly onto the product. An electric shock may occur. (Do not use  
chemicals such as benzene, paint thinners or alcohol)  
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;  
wipe in one direction only. Too much moisture may cause staining.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
On Disposal  
Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of  
your local authority.  
3
Accessories  
!!! Thank for selecting LGE products !!!  
Please make sure the following items are included with your  
monitor. If any items are missing, contact your dealer.  
Power Cord  
User's Guide/Cards  
15-pin D-Sub Signal Cable  
DVI-D Signal Cable  
(To set it up, this signal cable may be  
(This feature is not available in all  
attached to this product before  
countries.)  
shipping out.)  
Audio Cable  
USB Cable  
NOTE  
This accessories may look different from those shown here.  
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite  
cores to maintain standard compliance for the product.  
4
Connecting the Display  
E2211PU  
Before setting up the monitor, ensure that the power to the monitor,  
the computer system, and other attached devices are turned off.  
Connecting the stand base  
1.  
Place the monitor with its front facing downward on a cushion or soft cloth.  
2.  
Assemble the Stand Base into the Stand Body.  
Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.  
Stop Pin  
Stand Body  
Stand Base  
WARNING  
The tape and locking pin may only be removed from those monitors equipped with a  
standing base when the base is pulled up. Otherwise, you may be injured by the protruding  
sections of the stand.  
Product Handling with Care : When you lift up or move the product, Do Not hold or touch the  
front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover of  
the product.)  
5
Connecting the Display  
E2211PU  
3. Use a coin on the back of the stand base and turn the screw clockwise to tighten.  
4. Lift and turn the monitor to face towards the front after the connection is  
made to the female part of the cable you're attaching.  
Removing the stand base  
1.  
Place the monitor with its front facing downward on a cushion or soft cloth.  
2. When you desire to disintegrate the monitor from the stand base, use a coin to turn the  
screw counterclockwise.  
IMPORTANT  
This illustration depicts the general model of connection. Your monitor may differ from the items  
shown in the picture.  
Do not carry the product upside down holding only the stand base. The product may fall and get  
damaged or injure your foot.  
6
Connecting the Display  
E2411PU  
Before setting up the monitor, ensure that the power to the monitor,  
the computer system, and other attached devices are turned off.  
Connecting the stand base  
1.  
Place the monitor with its front facing downward on a cushion or soft cloth.  
2.  
Assemble the Stand Base into the Stand Body.  
Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.  
Stand Body  
Stand Base  
Stop Pin  
3.  
Once assembled take the monitor up carefully and face the front side.  
WARNING  
The tape and locking pin may only be removed from those monitors equipped with a  
standing base when the base is pulled up. Otherwise, you may be injured by the protruding  
sections of the stand.  
Product Handling with Care : When you lift up or move the product, Do Not hold or touch the  
front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover of  
the product.)  
7
Connecting the Display  
E2411PU  
Removing the stand base  
1.  
Place the monitor with its front facing downward on a cushion or soft cloth.  
2.  
While pressing the latches, push the stand base in the direction of the arrow to separate  
from the stand body.  
IMPORTANT  
This illustration depicts the general model of connection. Your monitor may differ from the items  
shown in the picture.  
Do not carry the product upside down holding only the stand base. The product may fall and get  
damaged or injure your foot.  
8
Connecting the Display  
Positioning your display  
After installation, adjust the angle as shown below.  
1. Adjust the position of the panel in various ways for maximum comfort.  
Tilt Range  
Swivel Range : 356˚  
Height Range : maximum 4.33 inches (110.0 mm)  
110.0 mm  
* Please be sure to  
remove the Locking  
pin to adjust the height.  
9
Connecting the Display  
When adjusting the angle of the screen, do not put your finger(s) in  
between the head of the monitor and the stand body. You can hurt your  
finger(s).  
When adjusting the height of the screen, do not put your finger(s) in  
between the head of the monitor and the stand base. You can hurt your  
finger(s).  
WARNING  
You do not need to replace the Locking pin after it is removed, to adjust its height.  
ERGONOMIC  
It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt  
angle of the monitor should not exceed 5 degrees.  
10  
Connecting the Display  
Using the Pivot function  
-The pivot function allows you to rotate the screen 90 degrees clockwise.  
1.  
Lift the monitor to its highest height to utilize the Pivot function.  
2
.Landscape & Portrait : You can rotate the panel 90o clockwise.  
Please be cautious and avoid contact between the monitor head and the  
Stand Base when rotating the screen to access the Pivot function. If the  
monitor head touches the Stand Base, then the Stand Base could crack.  
Head section  
Stand section  
3.  
Be careful with the cables when rotating the screen.  
11  
Connecting the Display  
Connecting with the PC  
1. Before setting up the monitor, ensure that the power to the monitor, the computer  
2. sCyosntenmec, tasnidgnoathleinrpautttaccahbedledeviceasnids ptuorwneedr ocoff.rd  
in order, then tighten the screw  
1
2
of the signal cable.  
A
Connect DVI-D(Digital signal) Cable  
B
C
Connect D-sub(Analog signal) Cable  
Connect Audio Cable  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
When using a D-Sub signal input cable  
connector for Macintosh  
Mac adapter :For Apple Macintosh use, a  
separate plug adapter is needed to change the  
15 pin high density (3 row) D-sub VGA  
connector on the supplied cable to a 15 pin 2  
row connector.  
Varies according to model.  
Wall-outlet type  
Connect the signal  
input cable and tighten  
it up by turning in the  
direction of the arrow  
as shown in the figure.  
DVI-D (This feature is not available in all countries.)  
12  
Connecting the Display  
3. Put the power cord and cables into the cable holder.(Only E2411PU)  
Cable Holder  
4. Press the power button on the front panel to turn the power on. When monitor power is  
turned on, the 'Self Image Setting Function' is executed automatically.  
(Only Analog Mode)  
Power Button  
NOTE  
‘ Self Image Setting Function’? This function provides the user with optimal display  
settings.When the user connects the monitor for the first time, this function automatically adjusts  
the display to optimal settings for individual input signals.  
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen  
flicker or tilted screen while using the device or after changing screen resolution, press the  
AUTO function button to improve resolution.  
13  
Connecting the Display  
Connecting the USB(Universal Serial Bus) Cable  
1. You can use the USB port at the back of the monitor to connect peripherals (USB  
mouse, USB keyboard, etc.) to the monitor, not to the computer.  
Two USB Downstream ports  
Connect these ports to a mouse,  
USB keyboard,memory stick with  
current spec under 100mA.  
One USB Upstream port  
Connect this port to the downstream  
port of a computer, laptop or USB  
monitor (Your computer or USB  
monitor must support USB and have  
USB ports).  
2. The monitor’s USB terminal supports USB 2.0 and High Speed cables.  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
14  
Control Panel Functions  
Front Panel Controls  
MENU Button  
OSD LOCKED/UNLOCKED  
This function allows you to lock the current control  
settings, so that they cannot be inadvertently changed.  
Press and hold the MENU button for several seconds.  
The message "OSD LOCKED" should appear.  
You can unlock the OSD controls at any time by pushing  
the MENU button for several seconds. The message  
"OSD UNLOCKED" should appear.  
Use this button to enter SUPER ENERGY SAVING  
menu.For more information, refer to page 22.  
SUPER ENERGY  
SAVING Button  
15  
Control Panel Functions  
AUTO Button  
AUTO IMAGE ADJUSTMENT  
When adjusting your display settings, always press  
the AUTO button before entering the On Screen  
Display(OSD). (Only Analog Mode)  
This will automatically adjust your display image to  
the ideal settings for the current screen resolution  
size (display mode).  
The best display mode is  
E2211PU/E2411PU : 1920 x 1080  
When two input signals are connected, you can select the  
input signal (D-SUB/DVI) you want. When only one signal  
is connected, it is automatically detected. The default  
setting is D-Sub.  
INPUT Button  
(SOURCE Hot key)  
EXIT Button  
Exit the OSD(On Screen Display).  
Use this button to turn the display on or off.  
Power Button &  
Power Indicator  
The power indicator stays white if the display is running  
properly (On Mode). If the display is in Sleep Mode  
(Energy Saving), the power indicator is blinking white.  
16  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
Making adjustments to the image size, position and operating  
parameters of the display is quick and easy with the On Screen  
Display Control system.  
A short example is given below to familiarize you with the use of the  
controls. The following section is an outline of the available  
adjustments and selections you can make using the OSD.  
To make adjustments in the On Screen Display, follow these steps:  
Press the discretionary Button, then the main menu of the OSD appears.  
1
To access a control, use the corresponding Buttons.  
2
Use the  
Use the  
/
Buttons to adjust the image to the desired level.  
3
4
Button to select other sub-menu items.  
Press the EXIT Button to exit from the OSD.  
17  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
: D-SUB(Analog signal) input  
: DVI-D(Digital signal) input  
DSUB  
DVI-D  
Main menu  
Sub-menu  
VOLUME  
Supported input  
Description  
MENU  
To adjust the volume  
DSUB  
DVI-D  
To adjust the brightness of the  
screen  
BRIGHTNESS  
To adjust the image size  
ORIGINAL RATIO  
To customize the color of the  
screen  
COLOR TEMP  
(PRESET / USER)  
To adjust the contrast of the  
screen  
CONTRAST  
LANGUAGE  
To customize the screen status  
for a user's operating  
environment  
FACTORY RESET  
DSUB  
DVI-D  
SUPER  
Turn on the SUPER ENERGY  
SAVING function.  
ON  
ENERGY  
SAVING  
Turn off the SUPER ENERGY  
SAVING function.  
OFF  
Initialize the SUPER ENERGY  
SAVING and set to "OFF" mode.  
RESET  
NOTE  
The order of icons may differ depending on the model (18~24).  
18  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
Press the MENU Button, then the main menu of the OSD appears.  
Menu Name  
Icons  
Sub-  
menus  
Button  
Tip  
Exit  
Adjust (Decrease/Increase)  
Select another sub-menu  
Restart to select sub-menu  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
19  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
To adjust the volume of headphone/Speaker.  
To adjust the brightness of the screen.  
WIDE  
Switch to full screen mode according to  
input image signal.  
ORIGINAL  
Change the input image signal ratio to  
original.  
* This function works only if input  
resolution is lower than monitor ratio  
(16:9).  
Select the screen color.  
PRESET  
• WARM: Set the screen to warm color  
temperature .  
• MEDIUM: Set the screen to medium  
color temperature.  
• COOL: Set the screen to cool color  
temperature.  
USER  
RED  
Set your own red color levels.  
GREEN  
Set your own green color levels.  
Exit : Exit  
,
,
: Move  
BLUE  
: Select another sub-menu  
Set your own blue color levels.  
20  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Description  
To adjust the contrast of the screen.  
To choose the language in which the  
control names are displayed.  
Restore all factory default settings except  
"LANGUAGE."  
Press the  
immediately.  
,
buttons to reset  
Exit : Exit  
,
,
: Move  
: Select another sub-menu  
21  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
Press the SUPER ENERGY SAVING Button, then the main menu of the  
OSD appears.  
Menu Name  
Sub-menus  
Icons  
Button  
Tip  
Exit  
Move  
Restart to select sub-menu  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
22  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
Turn on the SUPER ENERGY  
SAVING fuction.  
ON  
When current setting value is  
ON,the SUPER SAVING color is  
green.  
OFF  
Turn off the SUPER ENERGY  
SAVING function.Now the monitor  
is LED SAVING function.  
When current setting value is  
OFF,the SUPER SAVING color is  
gray.  
Clear the TOTAL POWER  
REDUCTION and TOTAL CO2  
REDUCTION values.  
RESET  
Exit : Exit  
,
: Move  
: Select another sub-menu  
OK : Select  
TOTAL POWER REDUCTION : How much power is saved during using the monitor.  
TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2.  
23  
On Screen Display(OSD) Selection and Adjustment  
NOTE  
SAVING DATA(W/h):  
22 inch  
24 inch  
4
5
SUPER SAVING  
LED SAVING  
15  
17  
Saving Data depends on the Panel. So,those values should be different from  
each panel and panel vendor.  
LG accumulate those values using integrated function with 10 minutes  
broadcast video signal.  
LED Saving means that how much power can be saved using WLED Panel  
instead of CCFL panel.  
SUPER Saving means that how much power can be more saved using  
SUPER ENERGY SAVING function.  
24  
Troubleshooting  
Check the following before calling for service.  
No image appears  
G Is the power cord of the  
Check and see if the power cord is connected  
properly to the power outlet.  
display connected?  
G Is the power indicator  
Press the Power button.  
light on?  
G Is the power indicator  
If the display is in power saving mode, try moving  
the mouse or pressing any key on the keyboard to  
bring up the screen.  
flickering?  
• Try to turn on the PC  
.
G Do you see an "OUT OF  
RANGE" message on  
the screen?  
This message appears when the signal from the  
PC (video card) is out of horizontal or vertical  
frequency range of the display. See the  
'Specifications' section of this manual and  
configure your display again.  
This message appears when the signal cable  
between your PC and your display is not  
connected. Check the signal cable and try again.  
G Do you see a "CHECK  
SIGNAL CABLE"  
message on the  
screen?  
Do you see a "OSD LOCKED" message on the screen?  
G
Do you see “OSD  
LOCKED” when you  
push MENU button?  
• You can secure the current control settings,  
so that they cannot be inadvertently changed.  
You can unlock the OSD controls at any time  
by pushing the MENU button for several  
seconds: the message  
“OSD UNLOCKED” will appear.  
25  
Troubleshooting  
Display image is incorrect  
G Display Position is  
Press the AUTO button to automatically adjust  
your display image to the ideal setting.  
If the results are unsatisfactory, adjust the image  
position using the H position and V position icon  
in the on screen display.  
incorrect.  
Press the AUTO button to automatically adjust  
your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
vertical bars or stripes using the CLOCK icon in  
the on screen display.  
G On the screen  
background, vertical  
bars or stripes are  
visible.  
Press the AUTO button to automatically adjust  
your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
horizontal bars using the PHASE icon in the on  
screen display.  
Check Control Panel --> Display --> Settings  
and adjust the display to the recommended  
resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits  
(true color).  
G Any horizontal noise  
appearing in any  
image or characters  
are not clearly  
portrayed.  
IMPORTANT  
Check Control Panel --> Display --> Settings and see if the frequency or the  
resolution were changed. If yes, readjust the video card to the recommend  
resolution.  
If the recommended resolution (optimal resolution) is not selected, letters may be  
blurred and the screen may be dimmed, truncated or biased. Make sure to select  
the recommend resolution.  
The setting method can differ by computer and O/S (Operation System),  
and resolution mentioned above may not be supported by the video card  
performance. In this case, please ask to the computer or the video card  
manufacturer.  
26  
Troubleshooting  
Display image is incorrect  
G The screen color is  
Check if the signal cable is properly connected  
and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in  
the slot.  
Set the color setting higher than 24 bits (true color)  
at Control Panel - Settings.  
mono or abnormal.  
G The screen blinks.  
Check if the screen is set to interlace mode and if  
yes, change it to the recommend resolution.  
Do you see an "Unrecognized monitor, Plug&Play (VESA  
DDC) monitor found" message?  
G
Have you installed the  
display driver?  
Be sure to install the display driver from the display  
driver CD (or diskette) that comes with your  
display. Or, you can also download the driver from  
Make sure to check if the video card supports  
Plug&Play function.  
27  
Specifications  
E2211PU  
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 54.6 cm  
0.248 x 0.248 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 kHz to 83 kHz (Automatic)  
56 Hz to 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector  
DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
Video Input  
Resolution  
Max  
Recommend  
VESA 1920 x 1080 @60 Hz  
VESA 1920x 1080 @60 Hz  
Plug&Play  
USB  
DDC 2B(Digital),DDC2AB(Anlaog)  
USB2.0  
:
28 W(Typ.)  
0.3 W  
0.3 W  
On Mode  
Sleep Mode  
Off Mode  
Power  
Consumption  
With Stand  
Without Stand  
Width 50.92 cm ( 20.04 inch)  
Height 30.42 cm ( 11.97 inch)  
Dimensions  
& Weight  
Width 50.92 cm ( 20.04 inch)  
Height 35.39 cm ( 13.93 inch)(Min.)  
46.39 cm ( 18.26 inch)(Max.)  
Depth 22.44 cm ( 8.83 inch)  
Depth 6.17 cm ( 2.43 inch)  
Weight(excl. packing)  
3.8 kg (8.43 lb)  
Tilt  
Swivel  
Height  
-
4
˚
to 16  
356˚  
110 mm / 4.33 inch  
˚
Range  
Power Input  
AC 100 - 240 V~ 50 / 60 Hz 1.0 A  
Operating Conditions  
Environment  
al Conditions  
Temperature  
Humidity  
10 ˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20 ˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
28  
Specifications  
E2411PU  
60.9 cm (24 inch) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 60.9 cm  
0.276 x 0.276 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 kHz to 83 kHz (Automatic)  
56 Hz to 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector  
DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
Video Input  
Resolution  
Max  
Recommend  
VESA 1920 x 1080 @60 Hz  
VESA 1920x 1080 @60 Hz  
Plug&Play  
USB  
DDC 2B(Digital),DDC2AB(Anlaog)  
USB2.0  
:
30 W(Typ.)  
0.3 W  
0.3 W  
On Mode  
Sleep Mode  
Off Mode  
Power  
Consumption  
Without Stand  
Width 56.91 cm ( 22.40 inch)  
Height 34.19 cm ( 13.46 inch)  
With Stand  
Dimensions  
& Weight  
Width 56.91 cm ( 22.40 inch)  
Height 43.26 cm ( 17.03 inch)(Min.)  
54.26 cm ( 21.36 inch)(Max.)  
Depth 6.30 cm ( 2.48 inch)  
Depth 27.11 cm ( 10.67 inch)  
Weight(excl. packing)  
5.1 kg (11.33 lb)  
Tilt  
Swivel  
Height  
-
4
˚
to 17  
356˚  
110 mm / 4.33 inch  
˚
Range  
Power Input  
AC 100 - 240 V~ 50 / 60 Hz 1.2 A  
Operating Conditions  
Environment  
al Conditions  
Temperature  
Humidity  
10 ˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20 ˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
29  
Specifications  
Preset Modes (Resolution)  
E2211PU/E2411PU  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.023  
67.500  
63.981  
79.976  
65.290  
67.500  
720 x 400  
640 x 480  
70  
60  
75  
60  
75  
60  
75  
75  
60  
75  
60  
60  
3
640 x 480  
4
800 x 600  
800 x 600  
5
6
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
1680 x 1050  
1920 x 1080  
7
8
9
10  
11  
*12  
*Recommend Mode  
Indicator  
LED Color  
MODE  
White  
White Blinking  
Off  
On Mode  
Sleep Mode  
Off Mode  
30  
Installing the Wall mount plate  
This monitor satisfies the specifications of the Wall mount plate or  
the interchange device.  
1.  
After moving the product to face  
downward, make sure to place it on a  
soft cloth or a cushion to avoid surface  
damage.  
2.  
Separate the head and the stand with  
the use of a screwdriver.  
31  
Installing the Wall mount plate  
3. Install the Wall mount plate.  
Wall mount plate(Separate purchase)  
This is stand-type or wall mount type and is  
connectable with Wall mount plate.  
Please refer to the installation guide for more  
details, which is provided when Wall mount plate  
is purchased.  
Wall Mount pad  
<Screw Mounting Interface Dimension>  
Hole spacing : 100 mm x 100 mm.  
Kensington Security Slot  
Connected to a locking  
cable that can be  
purchased separately at  
most computer stores.  
NOTE  
VESA compatible only with respect to screw mounting interface dimensions and mounting screw  
specifications  
Please use VESA standard as below.  
* 784.8 mm and under (30.9 inch)  
- Wall Mount Pad Thickness : 2.6 mm  
- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm  
* 787.4 mm and above (31.0 inch)  
- Please use VESA standard wall mount pad and screws.  
32  

Pioneer GEX P910XM User Manual
Panasonic NV MS4A User Manual
Panasonic NV GS55GC User Manual
Panasonic DMW GTC1GU User Manual
Nikon Camera Flash SB 700 User Manual
Nikon 1000MM User Manual
Kenwood KAC 829 User Manual
Kenwood eXcelon KDC X994 User Manual
JVC KD S14 User Manual
JVC KD ADV49 User Manual