CD-RECEIVER
KDC-X889
KDC-MP828
KDC-MP7028
KDC-MP728
KDC-X789
KDC-MP628
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you
obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer to the
model and serial numbers whenever you call upon your KENWOOD dealer for
information or service on the product.
Model KDC-X889/MP828/MP7028/MP728/X789/MP628
Serial number
© B64-2962-00/00 (KW)
Menu system
41
Basic Operations of remote
51
Menu System
Security Code
Touch Sensor Tone
Accessories/
Installation Procedure
54
55
56
58
59
63
Manual Clock Adjustment
Date Adjustment
Date Mode
Connecting Wires to Terminals
Installation
Synchronize Clock
DSI (Disabled System Indicator)
Selectable Illumination
Dimmer
Removing the Unit
Troubleshooting Guide
Specifications
Switching preout
Built-in Amp Setting
G-Counter Level set
G-Analyzer Reset
G-Analyzer Calibration setup
G-Analyzer Stop Watch
Dual Zone System Setting
B.M.S. (Bass Management System)
B.M.S. Frequency Offset
AMP Control
Traffic Information
CRSC (Clean Reception System Circuit)
Receive mode Setting
SIRIUS ID (ESN) display
Auxiliary Input Display Setting & Station/Disc
Naming
Text Scroll
Built-in Auxiliary input Setting
CD Read Setting
Picture downloading
Voice Index
ACDrive firmware version display
Unique ID display
Audio Preset Memory
Audio Preset Call
Demonstration mode Setting
WOW, SRS and
SRS Labs, Inc.
symbol are trademarks of
WOW technology is incorporated under license
from SRS Labs, Inc.
The "AAC" logo is trademark of Dolby
Laboratories.
English
|
3
Safety precautions
About CD players/disc changers
connected to this unit
KENWOOD disc changers/ CD players released in
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models of disc changers/
CD players.
2WARNING
To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
Note that any KENWOOD disc changers/ CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected to this unit.
Unsupported connection may result in damage.
Setting the "O-N" Switch to the "N" position for the
applicable KENWOOD disc changers/ CD players.
The functions that can be used and the information
that can be displayed will differ depending on the
models being connected.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not set the removed faceplate or the faceplate
case in areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
•
You can damage both your unit and the CD changer if
you connect them incorrectly.
LX-bus connection
The LX AMP and the sensor unit cannot be
connected simultaneously.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
You must connect any of them at a time.
• Do not subject the faceplate to excessive shock,
as it is a piece of precision equipment.
• When replacing a fuse, only use a new one with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so will
cause damage or breakdown.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called lens
fogging, CDs may be impossible to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does
not operate normally after a while, consult your
Kenwood dealer.
Attach the panel while you are on the
vehicle
The panel lock arm will be appeared when the
panel is removed. Therefore, the panel must be
attached during the driving.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the
unit, the adapter might separate from the CD and
damage the unit.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.
|
4
English
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 50).
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
About ODD (Offset Dual Differential) D/A
System (KDC-X889/KDC-MP828)
The high quality sound play is to be done by ODD
D/A System. Dual D/A converters are built-in the
ODD D/A System, and the digital processing is
isolated and controlled separately for front channel
so the channel separation is improved sharply.
Also, it produces the data in which the sound data
is offset on the minus side and converts the two
signals (original and offset data) to the analog
signal, which has less noise and distortion, by the
synthetic process.
Reset button
However, ODD D/A System has no effect during the
following conditions.
- When "2 ZONE" of <Audio Setup> (page 13) is
"ON".
- When <Bypass Control> (page 17) is "Bypass".
Reset button
• We recommend the use of <Security Code>
(page 42) to prevent theft.
• The characters which can be displayed by ISO
8859-1.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on
the display on the actual equipment, and some
of the illustrations on the display may represent
something impossible in actual operation.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe neutral detergent off.
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a dry, soft cloth.
English
|
5
Notes
2Warning
About DAB Tuner control
2CAUTION
Refer to A group on the Instruction manual of DAB
Tuner KTC-9090DAB (optional accessory) for the
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be differed from the
Instruction manual; therefore, refer to the following
supplemental instruction.
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
KENWOOD CORPORATION
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
<Auto Ensemble Memory Entry>
1. Select the preset band for Auto Ensemble
Memory Entry.
TOKYO, JAPAN
2. Press the [AME] button for at least 2 seconds.
Open Auto Ensemble Memory Entry.
After storing in the memory finishes, the
number of the pre-set buttons and the
ensemble label are displayed.
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
<Searching by programme type and language>
and <Languages to be displayed> in
<Programme Type (PTY) Function>
Location : Bottom Panel
At the operation to press [DISP] button, press
[AUTO] button.
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly approved
in the instruction manual. The user could lose
the authority to operate this equipment if an
unauthorized change or modification is made.
About "Media Manager" of PC application
attached to KDC-X889/MP828/X789
• "Media Manager" is recorded in the CD-ROM
attached to this unit.
• Refer to the attached installation manual for the
installation method of "Media Manager".
• Refer to the user’s manual recorded in the
installation CD-ROM and Help of "Media Manager"
for the operation method of "Media Manager".
• The unit can play CD (hereafter called "ACDrive
disc") created by "Media Manager".
• Refer to the following site for the updated
information of "Media Manager".
• Contact Kenwood for the function and operation
of the "Media Manager".
• "Media Manager" is a product of PhatNoise.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment may cause harmful
interference to radio communications, if it is
not installed and used in accordance with the
instructions. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
|
6
English
About CDs
Handling CDs
• Don’t touch the recording surface of the CD.
Removing CDs
When removing CDs from this unit pull them out
horizontally.
CDs that can’t be used
• CDs that aren’t round can’t be used.
• CD-R and CD-RW are easier to damage than a
normal music CD. Use a CD-R or a CD-RW after
reading the caution items on the package etc.
• Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
• CDs with coloring on the recording surface or that
are dirty can’t be used.
• This unit can only play the CDs with
When using a new CD
If the CD center hole or outside rim has burrs, use it
after removing them with a ball pen etc.
.
It may not correctly play discs which do not have
the mark.
• A CD-R or CD-RW that hasn’t been finalized can’t
be played. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-
R/CD-RW recorder instruction manual.)
Burrs
Burrs
CD storage
• Don’t place them in direct sunlight (On the seat
or dashboard etc.) and where the temperature is
high.
• Store CDs in their cases.
CD accessories
Don’t use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
English
|
7
About AAC, MP3 and WMA
The playable AAC/MP3/WMA file (hereafter called
Audio file) and the media format has the following
limitation. The Audio file, which is out of the
specification, may not able to be played normally,
or the file and folder names may not be displayed
correctly.
•
•
•
File/Folder name is the number of the characters
including the extensions.
MP3 ID3 Tag can only display the tag of Ver1.X. (KDC-
MP7028/MP728/MP628 only)
AAC ID3 Tag cannot be displayed.
Limitation of structure for the file and the
folder
•
•
Attach the correct extension for the Audio file (AAC:
".M4A", MP3: ".MP3", WMA: ".WMA")
Do not attach the extensions to the other files besides
the Audio file. If it is attached, the file, which is not the
Audio file, will be played and outputs the loud noise, and
then the speaker will be damaged.
• Maximum number of directory levels: 8
• Maximum number of folders: 100
• Maximum number of files per folder:
KDC-MP7028/MP728/MP628: 255
KDC-X889/MP828/X789: 4096
•
The files with copy protection cannot be played.
Playing order of the Audio file
Playable AAC file
The Audio file is played in the order which is written
by writing soft. You may be able to set the playing
order by writing the play sequence numbers such
as "01" to "99" at the beginning of the file name.
• ".m4a" file encoded by AAC-LC format.
Refer to http://www.kenwood.mediamanager.jp
for the details.
Playable MP3 file
• MPEG 1/2 Audio Layer 3 file
Example
• Transfer bit rate: 8-320 kbps
• Sampling frequency
0
¡
: Folder
: Audio file
CD
(1)
¡!
2
KDC-MP7028/MP728/MP628:
8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz
KDC-X889/MP828/X789:
16, 22.05, 24, 32, 44.1, 48 kHz
Playable WMA file
¡"
3
¡#
¡$
• The file in accordance with Windows Media Audio
(Except for the file for Windows Media Player 9 or
after which applies the new functions)
4
¡%
• Transfer bit rate: 48-192 kbps
• Sampling frequency: 32, 44.1, 48 kHz
• Playing order
Playing order after ¡! play.
➡ ¡", ¡#, ¡$, ¡%...
• File search
Playable media
• CD-ROM, CD-R, CD-RW
Forward file search during ¡# play.
Push the Control knob to [¢] ➡ ¡$
•
•
Depending on the writing software, it may not be
possible to use quick formatted CD-RW discs.
When recording to the media up to the maximum
capacity at once, the writing soft is set to "Disc at once".
• Folder search
Forward folder search during ¡" play.
Push the Control knob to [FM] ➡ 3, 4...
• Folder select
When it is set to directory 4, skip to the folder
before the same level by folder select.
Push the Control knob to [4] ➡ 2
When it is set to directory 3, makes the level up
by folder select.
Playable disc format
• ISO 9660 Level 1/2
• Joliet
• Romeo
• Long file name.
The maximum number of characters for
display
File/Folder name:
Push the Control knob to [AM] ➡ 2
KDC-MP7028/MP728/MP628: 64 characters
KDC-X889/MP828/X789: 128 characters
MP3 ID3 Tag/ WMA Contents property/
AAC song information (KDC-X889/MP828/X789
only): 30 characters
|
8
English
Notes on Multi-function Key System
Multi-function Key System serves to control various
functions with the [1] — [6] buttons.
The basic operation of the Multi-function Key
System is described below.
Real operational example of the Multi-
function Key System
Example: Turning ON/OFF the Random Play during
CD play.
1. Show the function display of the Random Play.
If "RDM" is not shown in the display, press the
[NEXT] button to switch the sections until the
"RDM" function display is shown above the [3]
button.
What’s the Multi-function Key System?
This unit is equipped with the Multi-function Key
System that enables the operation of multiple
functions with one button.
2. Turn ON/OFF the Random Play.
Press the [3] button.
Each time the [3] button under the "RDM"
function display is pressed the Random Play is
turned ON/OFF.
For example, you can enter the Display Control
Mode or turn ON/OFF the Random Play by pressing
the [3] button during CD play.
Setting each function
The function display will show the controllable
function of the [1] — [6] button above the button.
Pressing the [1] — [6] button below the desired
function enables the setting of the function.
Example: KDC-X889/MP828
S.F.C S.M.S EQ WOW On Off DISP
Displaying the desired function
If five or more functions are available to be set with
the [1] — [6] button, they are divided into multiple
function groups (referred to as sections in this
manual) for registration.
XT
S.MODE SCAN RDM REP F SEL
Press the [NEXT] button to switch the sections.
Example: Function display of CD & External disc
source
Example: KDC-X889/MP828
S.F.C S.M.S EQ WOW On Off DISP
S.MODE SCAN RDM REP FSEL
English
|
9
General features
ANG
ATT
VOL
Control knob
Release button
1 – 6
NEXT/
MENU
SRC
ANG
ATT
VOL
Control knob
1 – 6
Release button
NEXT/
MENU
SRC
Power
Volume
Turning ON the Power
Increasing Volume
Press the [SRC] button.
Turn the [VOL] knob clockwise.
Turning OFF the Power
Decreasing Volume
Press the [SRC] button for at least 1 second.
Turn the [VOL] knob counterclockwise.
Selecting the Source
Attenuator
Turning the volume down quickly.
Press the [SRC] button.
Press the [ATT] button.
Each time the button is pressed, the Attenuator
turns ON and OFF.
Source required
SIRIUS tuner (Optional accessory)
Tuner or HD Radio (Optional accessory) "TUNER" or "HD Radio"
CD
External disc (Optional accessory)
Auxiliary input
Display
"SIRIUS"
When it’s ON, "ATT" is displayed.
"Compact Disc"
"CD Changer"
"AUX"
Auxiliary input (Optional accessory)
Standby (Illumination only mode)
"AUX EXT"
"STANDBY"
Function of the KDC-MP7028/KDC-MP728/KDC-
X789/KDC-MP628
Audio Control
|
10
English
3 Select the Detail Audio item for adjustment
Press the [VOL] knob.
1 Select the source for adjustment
Press the [SRC] button.
Each time the knob is pressed, the items that
can be adjusted switch as shown below.
4 Adjust the Detail Audio item
Turn the [VOL] knob.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Basic Audio item for adjustment
Press the [VOL] knob.
Bass level
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
Adjustment Item
Bass Center Frequency "Bass FRQ" 40/50/60/70/80/100/
120/150 Hz
Bass Q Factor
Bass Extend
Display
Range
4 Adjust the Basic Audio item
Turn the [VOL] knob.
"Bass Q Factor" 1.00/1.25/1.50/2.00
"Bass EXT" OFF/ON
Adjustment Item Display
"Rear Volume" 0 — 35
Subwoofer level*2,3,4 "Sub-WLevel" –15 — +15
Range
Middle level
Rear Volume *1
Adjustment Item Display
Middle Center
Frequency
Range
0.5/1.0/1.5/2.0 kHz
Bass level*5
"Bass Level"
"Middle Level" –8 — +8
"Treble Level" –8 — +8
"Balance"
"Fader"
–8 — +8
"Middle FRQ"
Middle level*5
Treble level*5
Balance
Middle Q Factor
"Middle Q Factor" 1.00/2.00
Left 15 — Right 15
Rear 15 — Front 15
Treble level
Fader*4
Adjustment Item
Treble Center Frequency "Treble FRQ" 10.0/12.5/15.0/17.5 kHz
Display
Range
Exit Audio Control mode
5 Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
•
•
*1 You can control this item when "2 ZONE" of <Audio
Setup> (page 12) is set to "ON".
*2 You can control this item when <Switching preout>
(page 43) is set to "SWPRE Sub-W". (KDC-MP728/
KDC-MP628 only)
•
•
When the Bass Extend is set to ON, low frequency
response is extended by 20%.
You can exit the Audio Control mode at anytime by
pressing any button except for [VOL] and [ATT]/[ANG]
buttons.
•
•
•
•
*3 You can control this item when <Subwoofer
Output> (page 14) is set to "SW ON".
*4 You can control this item when "2 ZONE" of <Audio
Setup> (page 12) is set to "OFF".
*5 These items can be adjusted in detail by the
following methods. (Function of the KDC-X789)
*5 Source tone memory: The set up value is put in the
memory per source. (Detail Audio item is included)
5 Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT]/[ANG] button.
Adjust the detail of Audio Control
(Function of the KDC-X789)
1 Select the Audio item for adjustment
By referring to the step 1 — 3 above, select the
desired item to be set in detail from the items
marked with *5.
2 Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
English
|
11
General features
Function of the KDC-X889/KDC-MP828
3 Select the Audio Setup item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
Audio Control
1 Select the source for adjustment
Press the [SRC] button.
4 Setup the Audio item
Turn the [VOL] knob.
2 Enter Audio Control mode
Press the [VOL] knob.
Adjustment Item Display
Front High Pass Filter*2 "HPF-F Fc"
(KDC-MP728/MP628)
Range
3 Select the Audio item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
Through/80/100/120/150
/180 Hz
(KDC-MP7028/X789)
Through/40/60/80/100/120/
150/180/220 Hz
Rear High Pass Filter*2 "HPF-R Fc"
(KDC-MP728/MP628)
4 Adjust the Audio item
Turn the [VOL] knob.
Through/80/100/120/150/
180 Hz
(KDC-MP7028/X789)
Through/40/60/80/100/120/
150/180/220 Hz
Adjustment Item Display
Rear Volume *1
"Rear Volume" 0 — 35
Subwoofer level*2,3 "Sub-WLevel" –15 — +15
Range
Low Pass Filter*1,2
(KDC-MP728/MP628)
(KDC-MP7028/X789)
"LPF-SW"
60/80/120/Through Hz
50/60/80/100/120/
Through Hz
Balance
Fader*3
"Balance"
"Fader"
Left 15 — Right 15
Rear 15 — Front 15
Exit Audio Control mode
Subwoofer Phase*1,2 "SW Phase" Reverse (180°)/ Normal (0°)
Volume offset
Loudness
Dual Zone System
"Vol-Offset" –8 — 0
"LOUD"
OFF/ON
OFF/ON
•
•
•
*1 You can control this item when "2 ZONE" of <Audio
"2 ZONE"
Setup> (page 13) is set to "ON".
*2 You can control this item when <Subwoofer
Output> (page 14) is set to "SW ON".
*2 You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
15) is set to any item other than "None".
*3 You can control this item when "2 ZONE" of <Audio
Setup> (page 13) is set to "OFF".
•
•
•
Volume offset: Each source’s volume can be set as a
difference from the basic volume.
Loudness: Compensating for low and high tones
during low volume.
*1You can control this item when <Switching preout>
(page 43) is set to "SWPRE Sub-W". (KDC-MP728/
MP628 only)
•
5 Exit Audio Control mode
Press any button.
Press the button which is not [VOL] knob and
[ATT]/[ANG] button.
•
•
•
*1 You can control this item when <Subwoofer
Output> (page 14) is set to "SW ON".
*2 You can control this item when "2 ZONE" of <Audio
Setup> is set to "OFF".
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- The channel of sub source is set up by <Dual Zone
System Setting> (page 45).
Function of the KDC-MP7028/KDC-MP728/KDC-
X789/KDC-MP628
Audio Setup
- Main source is selected by [SRC] button.
- The volume of Front channel is adjusted by [VOL]
knob.
- The volume of Rear channel is adjusted by <Audio
Control> (page 10).
- The Audio Control has no effect on sub source.
The Dual Zone System can be used with the Auxiliary
input sources shown below.
Setting the Sound system, such as Cross over
Network.
1 Select the source for adjustment
Press the [SRC] button.
•
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
- Internal auxiliary input
5 Exit Audio Setup mode
Press [VOL] knob for at least 1 second.
|
12
English
Function of the KDC-X889/KDC-MP828
5 Exit Audio Setup mode
Press [VOL] knob for at least 1 second.
Audio Setup
Setting the Sound system, such as Volume offset
and Dual Zone.
Function of the KDC-MP7028/KDC-MP728/KDC-
X789/KDC-MP628
1 Select the source for adjustment
Press the [SRC] button.
Speaker Setting
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
3 Select the Audio Setup item for adjustment
Press the [VOL] knob.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Speaker Setting mode
Press the [VOL] knob.
"SP SEL" is displayed.
4 Setup the Audio item
Turn the [VOL] knob.
Adjustment Item Display
Range
"Vol-Offset" –8 — 0
"2 ZONE" OFF/ON
3 Select the Speaker type
Turn the [VOL] knob.
Volume offset
Dual Zone System
Each time the knob is turned, the setting
switches as shown below.
•
•
Volume offset: Each source’s volume can be set as a
difference from the basic volume.
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- The channel of sub source is set up by <Dual Zone
System Setting> (page 45).
- Main source is selected by [SRC] button.
- The volume of Front channel is adjusted by [VOL]
knob.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
Display
"OFF"
"5/4 inch"
"6x9/6 inch"
"O.E.M."
4 Exit Speaker Setting mode
Press the [VOL] knob.
- The volume of Rear channel is adjusted by <Audio
Control> (page 12).
- The Audio Control has no effect on sub source.
The Dual Zone System can be used with the Auxiliary
input sources shown below.
•
•
- Internal auxiliary input
The Dual Zone System can be used only when you
have set the rear speaker to any mode other than
"None" in the <Sound Management system> (page
15).
•
•
When the "2 ZONE" is ON, each of the following setup
is ignored.
- <Sound Field Control> (page 14)
- <Sound Management system> (page 15)
- <Equalizer Control> (page 16)
- <WOW Control> (page 17)
- <Bypass Control> (page 17)
ODD D/A System is not effective when the "2 ZONE" is
ON.
English
|
13
General features
Subwoofer Output
4 Select the Sound Field Control item for
adjustment
Turning the Subwoofer output ON or OFF.
Press the [1] — [3] and [5] button.
Each time the [1] — [3] and [5] button is pressed,
the adjustable audio items are switched among
ranges of all stage section’s tables on the
following pages.
Hold down on [AM] of the Control knob for at
least 1 second.
Each time the button is pressed, Subwoofer
output switches ON and OFF.
When it’s ON, "SW ON" is displayed.
Multi-function key operation
Sound Field control item
[1] "XOver"
[1] "Front"*
[1] "Rear"*
[1] "SW"*
[2] "Front"
[2] "Rear"
[2] "SW"
High Pass Filter Front
High Pass Filter Rear
Low Pass Filter Subwoofer
DTA Front
DTA Rear
DTA Subwoofer
Position Setting
Call mode
Memory mode
•
•
You can control this item when <Switching preout>
(page 43) is set to "SWPRE Sub-W". (KDC-MP728/
MP628 only)
You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
15) is set to any item other than "None". (KDC-X889/
MP828 only)
[2] "DTA"
[3] "POSI"
[5] "Preset"
[1] "CALL"
[2] "MEM"
•
You can control this item when "2 ZONE" of <Audio
Setup> (page 12/13) is set to "OFF".
•
* The following adjustment items can be selected by
[FM] or [AM] knob for "XOver".
[1] "XOver"
"Front"
[FM] or [AM] Knob
Front High Pass Filter Center
Function of the KDC-X889/KDC-MP828
Front High Pass Filter Slope
Rear High Pass Filter Center
Sound Field Control
"Rear"
"SW"
Rear High Pass Filter Slope
Subwoofer Low Pass Filter Center
1 Select the source for adjustment
Press the [SRC] button.
Subwoofer Low Pass Filter Slope
Subwoofer Low Pass Filter Phase
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.F.C" is
displayed above the [1] button.
Refer to <Notes on Multi-function Key System>
(page 9).
•
"Preset": You can store an adjusted audio control
value by selecting "MEM". Refer to <Memory
mode> (page 18). Also, you can recall it by
selecting "CALL". Refer to <Memory Recall
mode> (page 18).
•
•
"SW" can be adjusted when <Subwoofer Output>
(page 14) is set to "SW ON"
Xover (Crossover Network Setup)
You can manually set a crossover frequency of
speakers.
DTA (Digital Time Alignment)
Manually set the sound output timing of each
channel.
3 Enter Sound Field Control mode
Press the [1] ("S.F.C") button.
•
When "2 ZONE" of <Audio Setup> (page 13) is ON,
you cannot select "S.F.C".
•
|
14
English
5 Adjust the Sound Field Control item
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.M.S" is
displayed above the [2] button.
Refer to <Notes on Multi-function Key System>
(page 9).
Sound Field Control Item
Front High Pass Filter Center/
Rear High Pass Filter Center
(KDC-X889)
Range
3 Enter Sound Management mode
Press the [2] ("S.M.S") button.
Through/30 — 100/120/150/
180/220/250 (Hz)
(KDC-MP828)
Through/40/60/80/100/120/
150/180/220 (Hz)
•
When "2 ZONE" of <Audio Setup> (page 13) is ON,
you cannot select "S.M.S".
Front High Pass Filter Slope/
Rear High Pass Filter Slope/
Subwoofer Low Pass Filter Slope*
(KDC-X889)
(KDC-MP828)
Subwoofer Low Pass Filter Center*
(KDC-X889)
4 Select the Sound Management item for
adjustment
Press the [1] — [5] button.
-12/-18/-24 dB/oct
-12/-18 dB/oct
30 — 100/120/150/180/220/
250 (Hz)/Through
40/60/80/100/120/150/180/
220 (Hz)/Through
Reverse/ Normal
0 — 20.33 (feet)
Multi-function key operation Sound Management Item
[1] "CABIN"
[2] "F"
[3] "R"
[4] "SW"
[5] "Preset"
Cabin Setting
(KDC-MP828)
Speaker Select Front
Speaker Select Rear
Speaker Select Subwoofer
Subwoofer Low Pass Filter Phase*
DTA Front/DTA Rear
DTA Subwoofer*
Position Setting
[1] "CALL"
[2] "MEM"
Call mode
Memory mode
Front-L/ Front-R/ Front/ ALL
•
"Preset": You can store an adjusted sound
•
•
To get the best sound, first set the Cabin Setting
management system value by selecting
"MEM". Refer to <Memory mode> (page 18).
Also, you can recall it by selecting "CALL".
Refer to <Memory Recall mode> (page 18).
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 15).
When the "2 ZONE" of <Audio Setup> (page 13) is
"ON", each of the following setup is ignored.
- "Xover"
- "DTA"
- "POSI"
- "Preset"
* You can control this item when <Subwoofer
Output> (page 14) is set to "SW ON".
* You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
15) is set to any item other than "None".
5 Adjust the Sound Management item
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
•
•
Sound Managemnt Item Range
Cabin Setting
OFF/ COMPACT/ FULL SIZE CAR/
WAGON1/ WAGON2/ MINI VAN1/
MINI VAN2/ SUV/ MINI VAN LONG
Speaker Select Front
Speaker Select Rear
6 ½/ 6 ¾/ 7/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ OEM/ 4/ 5 (inch)
6 Exit Sound Field Control mode
Press the [6] ("RTN") button.
6 ½/ 6 ¾/ 7/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ None/ OEM/ 4/ 5 (inch)
Speaker Select Subwoofer
8/ 10/ 12/ 15over/ None/
6 ½(inch)
Function of the KDC-X889/KDC-MP828
6 Exit Sound Managemnt mode
Press the [6] ("RTN") button.
Sound Management system
1 Select the source for adjustment
Press the [SRC] button.
English
|
15
General features
Equalizer Control
1 Select the source for adjustment
•
•
User memory:
Press the [SRC] button.
The values set on the <Audio Control> (page 10/12).
Each setting value is changed with the <Speaker
Setting> (KDC-MP7028/MP728/X789/MP628) (page
13) / <Sound Management system> (KDC-X889/
MP828) (page 15).
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "EQ"/"SYS.Q"
is displayed above the [3] (KDC-X889/MP828)/[1]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
First, select the speaker type with the Speaker setting.
Equalizer Front Setting/
Equalizer Rear Setting (KDC-X889/MP828
only)
3 Enter Equalizer Control mode
Press the [3] ("EQ")/[1] ("SYS.Q") button.
1 Select a frequency band you wish to adjust
Press the [2] ("F") or [3] ("R") button.
Each time the button is pressed, it switches
between "Band 1" and "Band 4".
2 Select the adjustment items for Equalizer.
Push the Control knob to [FM] or [AM].
Each time the button is pressed, the items that
can be adjusted switch as shown below.
3 Adjust the Equalizer.
•
When "2 ZONE" of <Audio Setup> (page 13) is ON,
you cannnot select "EQ". (KDC-X889/MP828 only)
4 Select the Equalizer Control item for
adjustment
Press the [1] — [3]/[5] button.
Multi-function key operation Equalizer Control Item
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
[1] "SYS.Q"
[2] "F"*
[3] "R"*
System Q Setting
Equalizer Front Setting
Equalizer Rear Setting
Equarizer adjustment item Range
Equalizer Front Frequency/
Equalizer Rear Frequency
[5] "Preset"*
[1] "CALL"
[2] "MEM"
Call mode
Memory mode
Refer to the followings.
Equalizer Front Level/
Equalizer Rear Level
–9 — +9
•
•
* Function of the KDC-X889/MP828
"Preset": You can store an adjusted equalizer control
value by selecting "MEM". Refer to <Memory
mode> (page 18). Also, you can recall it by
selecting "CALL". Refer to <Memory Recall
mode> (page 18).
Equalizer Front Quality/
Equalizer Rear Quality
0.25/ 0.50/ 1.00/ 2.00
•
The frequency which can be selected by each
Frequency band is shown below.
5 Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
Band
Band1
Band2
Band3
Band4
Frequency
60/ 80/ 100/ 120/ 160/ 200 (Hz)
250/ 315/ 400/ 500/ 630/ 800 (Hz)/ 1 (kHz)
1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)
5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)
KDC-X889/MP828
KDC-MP7028/
MP728/X789/MP628
Sound setting Display
Sound setting Display
•
To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 15).
User memory
Natural
Rock
Pops
Easy
"USER"
User memory "USER"
"NATURAL"
"ROCK"
"POPS"
"EASY"
"TOP 40"
"JAZZ"
Rock
Pops
"ROCK"
"POPS"
Easy
"EASY"
6 Exit Equalizer Control mode
(KDC-X889/MP828 only)
Press the [6] ("RTN") button.
Top 40
Jazz
"TOP 40"
"JAZZ"
Top 40
Jazz
Natural
"NATURAL"
|
16
English
•
TruBass: Assisting the playback for the super bass
sound.
SRS 3D: Making a natural 3D sound field.
SRS 3D cannot be set in tuner source.
Function of the KDC-X889/KDC-MP828
WOW Control
•
•
1 Select the source for adjustment
Press the [SRC] button.
6 Exit WOW Control mode
Press the [6] ("RTN") button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "WOW" is
displayed above the [4] button.
Refer to <Notes on Multi-function Key System>
(page 9).
•
To get the best sound, first set the Speaker select.
3 Enter WOW Control mode
Press the [4] ("WOW") button.
Function of the KDC-X889/KDC-MP828
Bypass Control
DSP (Digital Signal Processor) System can be
bypassed temporarily by this function.
•
When "2 ZONE"of <Audio Setup> (page 13) is ON, you
cannnot select "WOW".
4 Select the WOW Control item for adjustment
Press the [1] — [5] button.
1 Select the source for adjustment
Press the [SRC] button.
Multi-function keyoperation WOW Control Item
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "On Off" is
displayed above the [5] button.
Refer to <Notes on Multi-function Key System>
(page 9).
[1] "EFFECT"
[2] "FOCUS"
[3] "TB_F"
[4] "TB_R"
[5] "SRS 3D"
Effect
FOCUS
TruBass Front
TruBass Rear
SRS 3D
3 Enter Bypass Control mode
5 Adjust the WOW control item
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the setting
switches as shown below.
Press the [5] ("On Off") button.
•
When "2 ZONE" of <Audio Setup> (page 13) is ON,
you cannot select "On Off".
WOW Control Item
Effect
FOCUS
Range
Mid/High/User/Through/Low
OFF/1 — 9
4 Set up Bypass
Push the Control knob to [4] or [¢].
"Bypass": There is no effect by DSP.
"Through": There is an effect by DSP.
TruBass Front
TruBass Rear
SRS 3D
OFF/1 — 4
OFF/1 — 4
OFF/1 — 4
5 Exit Bypass Control mode
Press the [6] ("RTN") button.
•
•
WOW: TruBass, FOCUS and SRS 3D are all set to values
shown below.
•
•
When it is set to "Bypass", DSP System cannot be
adjusted.
When it is set to "Bypass", ODD D/A System is not
effective.
WOW
High
Mid
TruBass FOCUS SRS 3D
4
3
2
8
6
3
4
2
1
Low
FOCUS: Adjusts the vertical position of the front
speaker and sound image by virtual
adjustment.
English
|
17
General features
Function of the KDC-X889/KDC-MP828
4 Enter recall mode
Press the [1]("CALL") button.
Memory mode
5 Select the recall item
Press the [1]("CALL1")/[2]("CALL2") button for
at least 2 seconds.
The values of Field Control can be stored in
memory.
1 Adjust the item you wish to put in memory
By referring to <Sound Field Control> (page 14),
<Sound Management system> (page 15), and
<Equalizer Control> (page 16), adjust the item
you wish to put in the memory.
"CALL1": Recall the value put in "MEM.1" by
<Memory mode> (page 18).
"CALL2": Recall the value put in "MEM.2" by
<Memory mode> (page 18).
6 Exit Memory Recall mode
Press the [6] ("RTN") button.
2 Select the Preset Memory item section
Press the [6]("RTN") button.
Repeatedly press the button untill "Preset" is
displayed above the [5] button.
3 Select the Preset Memory item
Press the [5]("Preset") button.
Station/Disc Naming (SNPS/DNPS)
4 Enter Memory mode
Press the [2]("MEM") button.
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to
attach a title to
5 Put in the memory
Press the [1] ("MEM.1")/ [2] ("MEM.2") button
for at least 2 seconds.
•
A title can’t be attached to MD or Audio file media.
6 Exit Memory mode
Press the [6] ("RTN") button.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
•
"MEM.1": When you press the Reset, all the sources will
be the setting value which is registered.
3 Select Name set mode
Push the Control knob to [FM] or [AM].
Select the "Name Set" display.
4 Enter Name set mode
Press the Control knob for at least 1 second.
Function of the KDC-X889/KDC-MP828
5 Move the cursor to the enter character
position
Push the Control knob to [4] or [¢].
Memory Recall mode
Recall the value in the memory by the memory
mode.
6 Select the character type
Press the Control knob.
1 Select the source for adjustment
Press the [SRC] button.
Each time the knob is pressed, the character type
switches as shown below.
2 Select the key function
Press the [1]("S.F.C")/[2]("S.M.S")/[3]("EQ")
button.
Character type
Alphabet upper case
Alphabet lower case
Refer to <Notes on Multi-function Key System>
(page 9).
Numbers and symbols
Special characters (Accent characters)
3 Select the Preset Memory item
Press the [5]("Preset") button.
|
18
English
7 Select the characters
Push the Control knob to [FM] or [AM].
•
•
The faceplate is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage case while
detached.
Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.
•
Characters can be entered by using a remote with a
numbers buttons.
Example: If "DANCE" is entered.
Character
"D"
"A"
"N"
"C"
Button
[3]
[2]
[6]
[2]
Times pressed
1
1
2
3
2
Reattaching the Faceplate
1 Align the shaft on the unit with the
depression on the faceplate.
"E"
[3]
8 Repeat steps 5 through 7 and enter the name.
9 Exit Menu mode
Press the [MENU] button.
•
•
When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
Memory numbers
- FM/AM: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
•
The title of station/CD can be changed by the same
operation used to name it.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach
it.
Faceplate Angle Adjustment
Press the [ANG] button for at least 1 second.
•
Do not apply excessive force to the faceplate. It can
cause damage.
English
|
19
General features
Display Mode Switching
Switching the display mode.
•
* Function of the KDC-X889/MP828/MP7028/MP728/
X789
1 Select the key function section
Press the [NEXT] button.
5 Exit display control mode
Press the [6] ("RTN") button.
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
•
Under the display type other than "Display Type D",
the function item is not displayed. When the display
type other than "Display Type D" is selected, press [1]
to [6] buttons or [NEXT] button. The function item will
be displayed approximately 5 seconds.
The information can be switched by the Display
Type. Refer to the page on the following table for the
methods to switch by the Display Type.
2 Enter display control mode
Press the [6]/[2] ("DISP") button.
•
3 Select the display mode
Press the [1] ("MODE") button.
Display Type
Graphic 1
Text 2
A
B
C
D
E
4 Select the display Type
20
20
—
—
23
23
23
—
—
23
—
23
—
—
—
—
—
27
Push the Control knob to [4] or [¢].
Each time the knob is pushed, the display mode
switches as shown below.
—
—
—
—
—
22
Upper 4
Middle 5
Lower 6
—
—
—
—
Display Mode Display
"Display Type A"
"Display Type B"
"Display Type C"
"Display Type D"
"Display Type E"*
1
G-Analyzer 9
—
—
1
2
Display Type A/ Display Type B
Graphic part/ Spectrum Analyzer
Display Switching
3
4
Switching the graphic Display/ Spectrum analyzer
display.
3
3
5
6
1 Select the key function section
Press the [NEXT] button.
4
6
7
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
8
8
8
8
8
8
9
2 Enter display control mode
1 Graphic display part
2 Text display part
3 Text icon display part
4 Upper text display part
5 Middle text display part
6 Lower text display part
7 Source icon display part
8 Function item display
9 G-Analyzer display part
Press the [6]/[2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
4 Select the display Type
Push the Control knob to [4] or [¢].
Select the "Display Type A"/ "Display Type B"
display.
|
20
English
Display Type A/ Display Type B
5 Select the graphic/ spectrum analyzer
display
Press the [3] ("Graph") button.
Wallpaper selecting
Select a wallpaper to display when Display Type is
set to "Display Type A"/ "Display Type B".
6 Select the graphic/ spectrum analyzer
display part display
Push the Control knob to [4] or [¢].
Each time the button is pressed, the graphic
display/ spectrum analyzer display switches as
shown below.
1 Select the wallpaper display
Refer to <Graphic part/ Spectrum Analyzer
Display Switching> (page 20).
2 Select the wallpaper
Graphic display/ Spectrum Analyzer display
Movie 1
Movie 2
Movie 3 (KDC-X889/MP828 only)
*Downloaded movie
Spectrum analyzer 1
Spectrum analyzer 2
Spectrum analyzer 3
Spectrum analyzer 4 (KDC-X889/MP828 only)
Spectrum analyzer 5 (KDC-X889/MP828 only)
Wallpaper & *Downloaded Wallpaper
Display the wallpapers one after another
and select one
1 Turn the wallpaper scan ON.
Press the Control knob.
Each time the knob is pressed, the Wallpaper
scan is turned ON and OFF.
When it’s ON, "SCAN" is displayed.
When it’s ON, each wallpaper is displayed every
several seconds.
2 At the wallpaper you want to display.
Press the Control knob.
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the Control knob.
Each time the knob is pressed, the Wallpaper
scan is turned ON and OFF.
•
•
* Function of the KDC-X889/MP828/X789
* Downloaded movie and Downloaded Wall Paper,
refer to <Picture downloading> (page 48).
KDC-X789 doesn't display the Spectrum analyzer.
•
2 Select the wallpaper.
7 Exit display control mode
Press the [6] ("RTN") button.
Push the Control knob to [FM] or [AM].
Each time the knob is pushed, the Wallpaper
changes.
•
The setting of this function is available while "Display
Type A"/ "Display Type B" is selected for the Display
mode.
3 Exit Display Control mode
Press the [6] ("RTN") button.
English
|
21
General features
Display Type B
In Audio file source
Text Display Switching
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Play time & File number
Clock
Display
"Title/Artist"*1
"Album/Artist"*1
"Folder Name"
"File Name"
"P-Time"
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
"Clock"
"Date"
Date
In Auxiliary input source
Information
Auxiliary input name
Clock
Display
"AUX Name"/"AUX EXT"
"Clock"
2 Enter display control mode
Press the [6]/[2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
Date
"Date"
In HD Radio source
4 Select the display Type
Push the Control knob to [4] or [¢].
Select the "Display Type B" display.
Information
Station name
Title
Frequency
Clock
Display
"Station Name"*1
"Title"*1
"Frequency"
"Clock"
"Date"
5 Enter text select mode
Press the [2] ("TEXT") button.
6 Select the text
Date
Push the Control knob to [4] or [¢].
Refer to the table described later for setting
items.
In Standby
Information
Standby
Clock
Display
"STANDBY"
"Clock"
7 Exit Display Control mode
Press the [6] ("RTN") button.
Date
"Date"
In Tuner source
Information
Display
In SIRIUS tuner source
Station name, Program Service name*2 "BAND+ch+SNPS"
or Frequency
Information
Channel Name
Song Title
Display
"Channel Name"
"Song Title"
Radio text, Program Service name or
Frequency (FM)*2
"Radio Text"
Artist Name
Composer name
Category Name
Label Name
Comment
"Artist Name"
"Composer Name"
"Category Name"
"Label Name"
"Comment"
Frequency (FM,AM)
Clock
Date
"BAND+ch+FREQ"
"Clock"
"Date"
In CD & External disc source
Band & Channel Number
Clock
Date
"Channel Number"
"Clock"
"Date"
Information
Disc title
Track title
Track number & Play time
Disc name
Clock
Display
"Disc Title"*1
"Track Title"*1
"P-Time"
"DNPS"
"Clock"
Date
"Date"
|
22
English
6 Select the text display part
Push the Control knob to [FM] or [AM].
The cursor ( ) moves to the selected text display
part.
•
*1 If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
*2 Function of the KDC-X889/MP828/X789
Auxiliary input name is displayed for the Auxiliary
input source.
If the text for the Sirius tuner source, including
Channel name, etc. is selected when the channel
which does not have text for the Sirius tuner source,
including Channel name, etc. is played, band &
channel number is displayed.
•
•
Select the text
Push the Control knob to [4] or [¢].
Refer to the table described later for setting
items.
•
7 Exit Display Control mode
Press the [6] ("RTN") button.
•
•
When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
File number at Audio file displays the last 3 digits
when it exceeds 1000 songs (KDC-X889/MP828/X789
only).
Album name cannot be displayed in WMA file. (KDC-
MP7028/MP728/MP628 only)
Song title, Artist name, and Album name cannot be
displayed in AAC file. (KDC-MP7028/MP728/MP628
only)
•
•
•
The information displayed in Upper text display part,
Middle text display part and Lower text display part
can be switched when "Display Type C" is selected.
The information displayed in Upper text display part
and Lower text display part can be switched when
"Display Type D" is selected.
Same information cannot be displayed in Upper text
display part, Middle text display part and Lower text
display part. However, the blank display is able to have
multiple selections.
•
•
•
•
KDC-X789 doesn't display the Spectrum analyzer.
Album name cannot be displayed in WMA file. (KDC-
MP7028/MP728/MP628 only)
Display Type C/ Display Type D
•
•
When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed.
Song title, Artist name, and Album name cannot be
displayed in AAC file. (KDC-MP7028/MP728/MP628
only)
If the text for the Sirius tuner source, including
Channel name, etc. is selected when the channel
which does not have text for the Sirius tuner source,
including Channel name, etc. is played, band &
channel number is displayed.
Text Display Switching
Switching the text display.
1 Select the key function section
Press the [NEXT] button.
•
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
2 Enter display control mode
Press the [6]/[2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
4 Select the display Type
Push the Control knob to [4] or [¢].
Select the "Display Type C"/"Display Type D"
display.
5 Enter text select mode
Press the [2] ("TEXT") button.
English
|
23
General features
The text display in the Upper text display
part
In Auxiliary input source
Information
Display
In Tuner source
Auxiliary input name
Spectrum Analyzer & Clock
Date
"AUX Name"/"AUX EXT"
"Speana/Clock"
"Date"
Information
Station name, Program Service
name*1 or Frequency
Display
"BAND+ch+SNPS"
In HD Radio source
Radio text, Program Service name or "Radio Text"
Frequency (FM)*1
Information
Station name
Title
Frequency
Spectrum Analyzer & Clock
Date
Display
"Station Name"*2
"Title"*2
Frequency (FM,AM)
Spectrum Analyzer & Clock
Date
"BAND+ch+FREQ"
"Speana/Clock"
"Date"
"Frequency"
"Speana/Clock"
"Date"
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Disc name
Spectrum Analyzer & Clock
Date
Display
In SIRIUS tuner source
"Disc Title"*2
"Track Title"*2
"P-Time"
Information
Channel Name
Song Title
Display
"Channel Name"
"Song Title"
"DNPS"
"Speana/Clock"
"Date"
Artist Name
"Artist Name"
"Composer Name"
"Category Name"
"Label Name"
"Comment"
"Channel Number"
"Speana/Clock"
"Date"
Composer name
Category Name
Label Name
In Audio file source
Comment
Information
Display
Band & Channel Number
Spectrum Analyzer & Clock
Date
Song title & Artist name
Album name & Artist name
Folder name
"Title/Artist"*2
"Album/Artist"*2
"Folder Name"
"File Name"
"P-Time"
File name
Play time & File number
Spectrum Analyzer & Clock
Date
•
•
*1 Function of the KDC-X889/MP828/X789
*2 If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
Auxiliary input name is displayed for the Auxiliary
input source.
"Speana/Clock"
"Date"
•
•
In Standby
File number at Audio file displays the last 3 digits
when it exceeds 1000 songs (KDC-X889/MP828/X789
only).
Information
Standby
Clock
Display
"STANDBY"
"Clock"
Date
"Date"
|
24
English
The text display in the Middle text display
part (Display Type C)
In SIRIUS tuner source
Information
Spectrum Analyzer & Clock
Date
Blank
Channel Name
Song Title
Artist Name
Composer name
Category Name
Label
Display
"Speana/Clock"
"Date"
In Tuner source
Information
Display
"Blank"
Spectrum Analyzer & Clock
Date
"Speana/Clock"
"Date"
"Channel Name"
"Song Title"
"Artist Name"
"Composer Name"
"Category Name"
"Label Name"
"Comment"
Blank
"Blank"
Radio text (FM)
"Radio Text"*
(KDC-X889/MP828/X789only)
In CD & External disc source
Comment
Information
Spectrum Analyzer & Clock
Date
Display
"Speana/Clock"
"Date"
•
* If the contents of the information cannot be
Blank
Disc title
Track title
Disc name
"Blank"
displayed, Kenwood Logo displayed. However, In HD
Radio source, a display become a blank display.
"Disc Title"*
"Track Title"*
"DNPS"
In Audio file source
Information
Display
Spectrum Analyzer & Clock
Date
"Speana/Clock"
"Date"
Blank
"Blank"
Song title & Artist name
Album name & Artist name
Folder name
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
File name
Standby source
Information
Clock
Date
Display
"Clock"
"Date"
Blank
"Blank"
In Auxiliary input
Information
Display
Spectrum Analyzer & Clock
Date
"Speana/Clock"
"Date"
Blank
"Blank"
In HD Radio source
Information
Spectrum Analyzer & Clock
Date
Blank
Title
Display
"Speana/Clock"
"Date"
"Blank"
"Title"*
English
|
25
General features
The text display in the Lower text display part
In Tuner source
In SIRIUS tuner source
Information
Indicator
Display
"Indicator"
Information
Display
Spectrum Analyzer & Clock
Date
Blank
"Speana/Clock"
"Date"
"Blank"
Indicator
Spectrum Analyzer & Clock
Date
"Indicator"
"Speana/Clock"
"Date"
Channel Name
Song Title
Artist Name
Composer name
Category Name
Label
"Channel Name"
"Song Title"
"Artist Name"
"Composer Name"
"Category Name"
"Label Name"
"Comment"
Blank
"Blank"
Radio text (FM)(KDC-X889/MP828/X789 only) "Radio Text"*
In CD & External disc source
Information
Indicator
Spectrum Analyzer & Clock
Date
Display
"Indicator"
"Speana/Clock"
"Date"
Comment
Blank
"Blank"
Disc title
Track title
Disc name
"Disc Title"*
"Track Title"*
"DNPS"
•
* If the contents of the information cannot be
displayed, indicator displayed. However, In HD Radio
source, a display become a blank display.
In Audio file source
Information
Indicator
Spectrum Analyzer & Clock
Date
Display
"Indicator"
"Speana/Clock"
"Date"
Display Type C/ Display Type D
Font Color Select
Blank
"Blank"
Song title & Artist name
Album name & Artist name
Folder name
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
Selecting the display font color.
1 Select the key function section
Press the [NEXT] button.
File name
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789/MP628) button.
Refer to <Notes on Multi-function Key System>
(page 9).
Standby source
Information
Indicator
Clock
Display
"Indicator"
"Clock"
Date
Blank
"Date"
"Blank"
2 Enter display control mode
Press the [6]/[2] ("DISP") button.
In Auxiliary input
3 Select the display mode
Information
Indicator
Spectrum Analyzer & Clock
Date
Display
Press the [1] ("MODE") button.
"Indicator"
"Speana/Clock"
"Date"
4 Select the display Type
Push the Control knob to [4] or [¢].
Select the "Display Type C"/"Display Type D"
display.
Blank
"Blank"
In HD Radio source
5 Enter Font Color select mode
Press the [4] ("COLOR") button.
Information
Indicator
Spectrum Analyzer & Clock
Date
Blank
Title
Display
"Indicator"
"Speana/Clock"
"Date"
"Blank"
"Title"*
6 Select the text display part
Push the Control knob to [FM] or [AM].
The cursor ( ) moves to the selected text display
part.
|
26
English
Select the Font Color
G-Counter display
Point
Push the Control knob to [4] or [¢].
Time
7 Exit display control mode
Press the [6] ("RTN") button.
•
•
G-Graphic display
Displays the condition of G on horizontal direction
(e.g; when turning the curve) by the graphic.
G-Meter display (Graphic)
Function of the KDC-X889/KDC-MP828/KDC-
MP7028/KDC-MP728/KDC-X789 Display Type E
Displays the maximum value of acceleration G, right
direction G, and left direction G by the numerical
value.
G-Analyzer display Switching
Switches G-Analyzer display when the Display
type is set to "Display Type E". (G: gravity)
•
•
G-Meter display (Text)
The maximum value of acceleration G, right direction
G, and left direction G is displayed by the numerical
value. The value of G is only the reference so it is
differed from the actual value.
•
Before switching G-Analyzer display, <G-Counter Level
set> (page 44) and <G-Analyzer Calibration set> (page
44) are required to be setup.
G-Counter display
Adds the point of the acceleration level. The point
is determined after a lapse of 1 hr drive or at power
off (ex; ACC Off), and then it will be displayed by the
graph. Furthermore, it displays the average of the past
data by the line. (The scale of graph is determined
along with the largest point among the past 10 data.)
The value of G-Meter display and G-Counter display
can be reset by <G-Analyzer Reset> (page 44).
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is
displayed above the [6] (KDC-X889/MP828)/[2]
(KDC-MP7028/MP728/X789) button.
Refer to <Notes on Multi-function Key System>
(page 9).
•
7 Exit display control mode
Press the [6] ("RTN") button.
2 Enter display control mode
Press the [6]/[2] ("DISP") button.
3 Select the display mode
Press the [1] ("MODE") button.
4 Select the display Type
Push the Control knob to [4] or [¢].
Select the "Display Type E" display.
TEL Mute
The audio system automatically mutes when a
call comes in.
5 Enter G-Analyzer display select mode
Press the [3] ("GMENU") button.
6 Select the G-Analyzer display
Push the Control knob to [4] or [¢].
When a call comes in
"CALL" is displayed.
The audio system pauses.
G-Force Sensor display
G- Graphic display
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio
system comes back ON.
G-Meter display
(Graphic)
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio
system comes back ON.
G-Meter display
(Text)
English
|
27
Tuner features
Control knob
SRC
AUTO
/AME
1 – 6
NEXT
Control knob
1 – 6
Preset station
NEXT
SRC
AUTO
/AME
Band display
number
Frequency display
ST indicator
Tuning
Tuning mode
Auto seek
Display
Operation
"Seek Mode Automatic search for a station.
Auto 1"
Selecting the station.
Preset station seek "Seek Mode Search in order of the stations in
Auto 2" the Preset memory.
1 Select tuner source
Press the [SRC] button.
Manual
"Seek Mode Normal manual tuning control.
Manual"
Select the "TUNER" display.
2 Select the band
Push the Control knob to [FM] or [AM].
Each time the knob is pushed to [FM], it switches
between the FM1, FM2, and FM3 bands.
3 Tune up or down band
Push the Control knob to [4] or [¢].
Function of remote
Direct Access Tuning
Entering the frequency and tuning.
•
During reception of stereo stations the "ST" indicator
is ON.
1 Select the band
Press the [FM] or [AM] button.
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
"– – – –" is displayed.
Tuning Mode
Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed, the Tuning
mode switches as shown below.
3 Enter the frequency
Press the number buttons on the remote.
|
28
English
Example:
Preset Tuning
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
Calling up the stations in the memory.
1 Select the band
Push the Control knob to [FM] or [AM].
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are
displayed above the [1] — [6] buttons.
Refer to <Notes on Multi-function Key System>
(page 9).
Station Preset Memory
Putting the station in the memory.
3 Call up the station
Press the desired [1] — [6] button.
1 Select the band
Push the Control knob to [FM] or [AM].
2 Select the frequency to put in the memory
Push the Control knob to [4] or [¢].
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are
displayed above the [1] — [6] buttons.
Refer to <Notes on Multi-function Key System>
(page 9).
4 Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1 Select the band for Auto Memory Entry
Push the Control knob to [FM] or [AM].
2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
•
When Auto Memory Entry is done in the FM2 band,
the RDS stations preset in the FM1 band aren’t put in
the memory.
Likewise, when it is done in the FM3 band, RDS
stations preset in FM1 or FM2 aren’t put in the
memory.
English
|
29
Function of the KDC-X889/KDC-MP828/KDC-X789
RDS features
Control knob
AUTO
1 – 6
Control knob
AUTO
1 – 6
Band display
Program Service name
Radio text
Radio Text Scroll
No.
1.
2.
3.
4.
Program Type
Speech
Music
News
Information
Sports
Display
"All Speech"
"All Music"
"News"
"Information"
"Sports"
Scrolling the displayed radio text.
Hold down on [FM] of the Control knob for at
least 1 second.
5.
6.
Talk
"Talk"
7.
8.
9.
Rock
"Rock"
PTY (Program Type)
Classic Rock
Adult Hits
Soft Rock
Top 40
Country
Oldies
Soft
Nostalgia
Jazz
Classical
R & B
Soft R & B
Language
Religious Music
Religious Talk
"Classic Rock"
"Adult Hits"
"Soft Rock"
"Top 40"
"Country"
"Oldies"
"Soft"
"Nostalgia"
"Jazz"
"Classical"
"Rhythm & Blues"
"Soft R & B"
"Foreign Language"
"Religious Music"
"Religious Talk"
Selecting the Program Type and searching for a
station.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
1 Enter PTY mode
Press the Control knob.
"PTY Select" is displayed.
•
This function can't be used during a traffic bulletin or
AM reception.
2 Select the Program Type
Push the Control knob to [FM] or [AM].
|
30
English
23.
24.
25.
26.
Personality
Public
College
"Personality"
"Public"
"College"
"Weather"
Program Type preset
Putting the Program Type in the Preset button
memory and calling it up quickly.
Weather
Presetting the Program Type
1 Select the Program Type to preset
•
•
Speech and Music include the Program type below.
Music: No.7 — 19, 21
Speech: No.3 — 6, 20, 22 — 26
The Program Type can be put in the [1] — [6] button
memory and called up quickly. Refer to the <Program
Type preset> (page 31).
Refer to <PTY (Program Type)> (page 30).
2 Preset the Program Type
Press the desired [1] — [6] button for at least
2 seconds.
Calling up the preset Program Type
3 Search for the selected Program Type
station
Push the Control knob to [4] or [¢].
When you want to search for other stations, push
[4] or [¢] of the Control knob again.
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 30).
2 Call up the Program Type
Press the desired [1] — [6] button.
•
When selected Program Type isn't found, "No PTY" is
displayed. Select another Program Type.
4 Exit PTY mode
Press the Control knob.
Registration of a station as a PTY
Registering a Program Type for stations with no
PTY data.
1 Receive the station you want to register
2 Select the Program Type to register
Refer to <PTY (Program Type)> (page 30).
3 Register the Program Type
Press the [AUTO] button for at least 2
seconds.
Confirming the Program Type
Press the [AUTO] button.
The Program Type is displayed for 5 seconds.
4 Exit PTY mode
Press the Control knob.
English
|
31
CD/Audio file/External disc control features
Control knob
1 – 6
NEXT
SRC
Control knob
NEXT
1 – 6
Track number Track time
SRC
IN indicator
When a disc is inserted
Press the [SRC] button.
Playing CD & Audio file
Select the "Compact Disc" display.
When there is no disc inserted
Pause and play
1 Open the panel.
Press the Control knob.
Each time the knob is pressed, it pauses and
plays.
Press the [0] button.
2 Insert a disc.
Eject the disc
•
•
When the faceplate has been slid open, it might
interfere with the shift lever or something else. If this
happens, pay attention to safety and move the shift
lever or take an appropriate action, then operate the
unit.
Insert the disc horizontal to the slot. If you insert the
Disc as you push down the Disc, it may scratch the
Disc.
1 Eject the disc
Press the [0] button.
2 Return the panel to the original position
Press the [0] button.
•
•
Refer to <About AAC, MP3 and WMA> (page 8) for the
Audio file by models which can be played.
The announcement when selecting the folder can be
canceled by <Voice Index> (page49) during the play
of the ACDrive.
•
When a disc is inserted the "IN" indicator is ON.
|
32
English
Function of disc changer/ Audio file
Playing External Disc
Disc Search/Folder Search
Playing discs set in the optional accessory disc
player connected to this unit.
Selecting the disc set in the Disc changer or the
folder recorded on the Audio file media.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Push the Control knob to [FM] or [AM].
Display
"CD Changer"
"MD Changer"
Disc player
CD changer
MD changer
Function of remote
Direct Track/File Search
Pause and play
Doing Track/File Search by entering the track/file
number.
Press the Control knob.
Each time the knob is pressed, it pauses and
plays.
1 Enter the track/file number
Press the number buttons on the remote.
•
The functions that can be used and the information
that can be displayed will differ depending on the
external disc players being connected.
•
Direct File Search can be selected up to 999. (KDC-
X889/MP828/X789 only)
2 Do Track/File Search
Press the [4] or [¢] button.
Canceling Direct Track/File Search
Press the [38] button.
Fast Forwarding and Reversing
Fast Forwarding
Hold down on [¢] of the Control knob.
Release your finger to play the disc at that point.
Function of disc changers with remote
Reversing
Direct Disc Search
Hold down on [4] of the Control knob.
Release your finger to play the disc at that point.
Doing Disc Search by entering the disc number.
1 Enter the disc number
•
•
The sound is not output while the Audio file is being
searched.
Fast Forwarding and Reversing cannot be done while
AAC file is being played. (KDC-MP7028/MP728/MP628
only)
Fast Forwarding and Reversing cannot be done
depending on AAC file format. (KDC-X889/MP828/
X789 only)
Press the number buttons on the remote.
2 Do Disc Search
Press the [+] or [–] button.
Canceling Direct Disc Search
Press the [38] button.
•
Track/File Search
Searching for a song on the disc or in the Audio
file folder.
Push the Control knob to [4] or [¢].
English
|
33
CD/Audio file/External disc control features
Track/File/Disc/Folder Repeat
Random Play
Replaying the song, disc in the Disc changer or
Audio file folder folder you’re listening to.
Play all the songs on the disc or Audio file folder
in random order.
1 Select the key function section
Press the [NEXT] button.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "REP" is
displayed above the [4] button.
Refer to <Notes on Multi-function Key System>
(page 9).
Repeatedly press the button until "RDM" is
displayed above the [3] button.
Refer to <Notes on Multi-function Key System>
(page 9).
2 Turn ON/OFF the Repeat Play
Press the [4] ("REP") button.
2 Turn ON/OFF the Random Play
Press the [3] ("RDM") button.
Each time the button is pressed, the Repeat Play
switches as shown below.
Each time the button is pressed, Random Play
turns ON and OFF.
When it’s ON, "Random ON" is displayed.
In CD & External disc source
Repeat play
Track Repeat
(In Disc Changer)
Display
"Repeat ON"
("Track Repeat ON")
•
When the Control knob is pushed to [¢], the next
random song starts.
Disc Repeat (In Disc Changer)
OFF
"Disc Repeat ON"
"Repeat OFF"
Function of disc changer
In Audio file
Magazine Random Play
Repeat play
File Repeat
Folder Repeat
OFF
Display
"File Repeat ON"
"Folder Repeat ON"
"Repeat OFF"
Play the songs on all the discs in the disc changer
in random order.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "M.RDM" is
displayed above the [6] button.
Refer to <Notes on Multi-function Key System>
(page 9).
Scan Play
Playing the first part of each song on the disc
or Audio file folder you are listening to and
searching for the song you want to listen to.
2 Turning ON/OFF the Magazine Random Play
Press the [6] ("M.RDM") button.
Each time the button is pressed, the Magazine
Random Play turns ON and OFF.
1 Select the key function section
Press the [NEXT] button.
Repeat to press the button until "SCAN" is
displayed above the [2] button.
Refer to <Notes on Multi-function Key System>
(page 9).
When it’s ON, "Magazine RDM ON" is displayed.
•
When the Control knob is pushed to [¢], the next
random song starts.
2 Start Scan Play
Press the [2] ("SCAN") button.
"Scan ON"/"Track Scan ON" is displayed.
3 Release it when the song you want to listen
to is played
Press the [2] button.
|
34
English
Function of the KDC-X889/KDC-MP828/KDC-X789
Function of Audio file
Folder number display
Displays the number in the folder
belonging to the currently selected folder.
Disc Random Play
Playing randomly from all of the Audio files
recorded in the disc.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "RDM" is
displayed above the [3] button.
Refer to <Notes on Multi-function Key System>
(page 9).
Folder name display
Displays the current folder name.
•
It doesn't function when <Disc Random Play> (page
35) is ON.
2 Turn ON the Disc Random Play
Press the [3] ("RDM") button for at least 1
second.
3 Select the folder level*
Push the Control knob to [FM] or [AM].
With the [FM] button, you move 1 level down
and with the [AM] button 1 level up.
When it’s ON, "Disc Random ON" is displayed.
Canceling the Disc Random Play
Press the [3] ("RDM") button.
Selecting a folder in the same level
Push the Control knob to [4] or [¢].
With the [4] of the Control knob, you move
to the previous folder, and with the [¢] of the
Control knob to the next folder.
•
When the Control knob is pushed to [¢], the next
random song starts.
Returning to the top level*
Press the [3] ("HOME") button.
Function of Audio file
Folder Select
•
* You can operate when <Switching the Play mode>
(page 36) is set to "Folder Mode" while playing
ACDrive. (KDC-X889/MP828/X789)
Quickly selecting the folder you want to listen to.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "FSEL" is
displayed above the [5] button.
Refer to <Notes on Multi-function Key System>
(page 9).
Scrolling the folder name display
Press the [SCRL] button.
4 Decide the folder to play
Press the [1] ("OK") button.
The Folder Select mode releases, and the Audio
file in the folder being displayed is played.
2 Enter Folder Select mode
Press the [5] ("FSEL") button.
"Select Mode" is displayed.
Canceling the Folder Select mode
Press the [2] ("EXIT") button.
During Select mode the folder information is
displayed as shown below.
English
|
35
CD/Audio file/External disc control features
Function of the KDC-X889/KDC-MP828/KDC-X789
2 Enter the Letter Seek mode
Press the [1] ("S.MODE") button for at least 1
second.
Function of ACDrive disc
Switching the Play mode
Arrange the playing orders of the songs by
categories.
•
•
It doesn't function when <Disc Random Play> (page
35) is ON.
This function is available only when the Play mode is
set Genre, Artist, or Album.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.MODE" is
displayed above the [1] button.
Refer to <Notes on Multi-function Key System>
(page 9).
Canceling the Letter Seek
Press the [1] ("EXIT") button.
3 Start the Letter Seek
Push the Control knob to [4] or [¢].
The initial of Genre name, Artist name, or Album
name is displayed and read out by the order.
2 Select the Play mode
Press the [1] ("S.MODE") button.
Each time the button is pressed, the Play mode
switches as follows.
•
•
The announcement of the initial can be canceled by
<Voice Index> (page49).
When the Control knob is pushed to the reverse of
[4] or [¢] while Letter Seek, the initial is displayed
and read by the reversed order.
Play mode
"Play List Mode" Play list order.
"Genre Mode" By genre.
"Artist Mode"
"Album Mode" By album.
Category which is to be arranged
By artist.
•
When the Letter Seek is started, it cannot be
cancelled.
"Folder Mode" By the folder recorded in Disc.
4 Select the song to play
Press the Control knob when the initial of the
song you are searching is displayed and read.
The selected initial group plays.
•
The category information of each song is the data
registered in Media Manager when ACDrive disc is
being generated.
•
•
The announcement when the mode is switched can
be canceled by <Voice Index> (page 49).
The advancement of the Play mode information can
be selected by [AM] and [FM] keys.
•
The category with marks or letters that cannot be read
cannot be selected.
Text/Title Scroll
Function of the KDC-X889/KDC-MP828/KDC-X789
Function of the ACDrive disc
Scrolling the displayed CD text, Audio file text, or
MD title.
Letter Seek
The song, in which you want to play, can be
searched by selecting the initial of Genre name,
Artist name, or Album name.
Hold down on [FM] of the Control knob for at
least 1 second.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "S.MODE" is
displayed above the [1] button.
Refer to <Notes on Multi-function Key System>
(page 9).
|
36
English
SIRIUS tuner control features
Control knob
1 – 6
AUTO
NEXT
SRC
Control knob
AUTO
NEXT
1 – 6
SRC
Band display
Channel number
Select SIRIUS Satellite Radio Mode
Display
"Seek Mode
Channel"
Operation
Normal manual seeking control.
Selecting the SIRIUS Satellite Radio Tuner
(optional accessory) connected to this unit.
"Seek Mode
Preset"
Search in order of the channels in the Preset
memory.
Selecting SIRIUS Mode
Press the [SRC] button.
Select the "SIRIUS" display.
Select the channel
•
You need to subscribe to SIRIUS to receive the service
by SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-
539-SIRIUS TO SUBSCRIBE" appears.
Selecting the channel.
Push the Control knob to [4] or [¢].
•
•
It may take a little time to start receiving after you
selected the SIRIUS source.
If the signal receiving fails, "Acquiring Signal" appears.
Switching Seek Mode
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed, the Seek mode
switches as shown below.
English
|
37
SIRIUS tuner control features
Category and Channel Search
Selecting the Preset Band
Selecting the channel and category you want to
receive.
Push the Control knob to [FM].
Each time the knob is pushed, the preset band
switches between the SR1, SR2, SR3 and SR4.
1 Enter Category and Channel Search mode
Press the Control knob.
2 Select the Category
Push the Control knob to [FM] or [AM].
Channel Preset Memory
Putting the channel in the memory.
•
It is the item when the category of Middle text display
part is selected.
1 Select the preset band
Push the Control knob to [FM].
3 Select the Channel
Push the Control knob to [4] or [¢].
2 Select the channel to put in the memory
Push the Control knob to [4] or [¢].
•
Channel search cannot be done until the category
information is acquired.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are
displayed above the [1] — [6] buttons.
Refer to <Notes on Multi-function Key System>
(page 9).
Cancelling Category and Channel Search
mode
Press the Control knob.
4 Put the channel in the memory
Press the desired [1] — [6] button for at least
2 seconds.
Function of remote
The preset number display blinks 1 time.
On each band, 1 channel can be put in the
memory on each [1] — [6] button.
Direct Access Tuning
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
•
Only the channel number is stored. Category
information is not stored.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
Push the Control knob to [4] or [¢].
Preset Tuning
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
Calling up the channels in the memory.
1 Select the preset band
Push the Control knob to [FM].
•
If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
You can set up until Channel number 223.
If there is no signal in the input Channel, "NO
CHANNEL" appears. (KTC-SR901: optional accessory)
You cannot search for a channel number which is not
broadcasting.
(KTC-SR902/KTC-SR903: optional accessory)
If you cannot receive any signal in the input Channel
due to a bad condition on radio wave or another
problem, "Acquiring Signal" appears.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are
displayed above the [1] — [6] buttons.
•
•
•
•
3 Call up the channel
Press the desired [1] — [6] button.
|
38
English
Channel Scan
Every receivable Channel is checked for 10
seconds.
1 Start Channel Scan
Press the [AUTO] button for at least 2
seconds.
The channel number display blinks.
2 Release it when the song you want to listen
to is received
Push the Control knob to [4] or [¢].
Text Scroll for SIRIUS tuner source
Scrolls the displayed channel name and other
items.
Hold down on [FM] of the Control knob for at
least 1 second.
English
|
39
HD Radio control features
Control knob
MENU
SRC
Control knob
NEXT
SRC
Band display
Frequency display
Tuning
•
•
When you connect an HD Radio, Tuner features of
the unit are disabled and switched to HD Radio tuner
features. A portion of the setting methods including
the Tuning Mode will change.
With the HD Radio tuner, you can use the similar
functions to <Station Preset Memory>, <Auto
Memory Entry>, and <Preset Tuning> of Tuner
features. Refer to Tuner features for how to use the
functions.
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD Radio" display.
2 Select the HD FM band
Push the Control knob to [FM].
Each time the knob is pushed to [FM], it switches
between the HF1, HF2, and HF3 bands.
Select the HD AM band
Push the Control knob to [AM].
3 Tune up or down band
Push the Control knob to [4] or [¢].
|
40
English
Menu system
Control knob
MENU
Control knob
MENU
Menu display
Menu System
4 Exit Menu mode
Press the [MENU] button.
Setting during operation beep sound etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
•
When other items that are applicable to the basic
operation method above are displayed, afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original setting.)
Also, the explanation for items that aren’t applicable
(<Manual Clock Adjustment> etc.) are entered step
by step.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
•
It is the item when the menu item of Middle text
display part is selected.
2 Select the menu item
Push the Control knob to [FM] or [AM].
Example: When you want to set the beep sound
select the "Beep" display.
3 Set the menu item
Push the Control knob to [4] or [¢].
Example: When "Beep" is selected, each time the
knob is pushed it switches "Beep : ON"
or "Beep : OFF". Select 1 of them as the
setting.
You can continue by returning to step 2 and
setting other items.
English
|
41
Menu system
In Standby mode
Press the Reset button and when it’s removed
from the battery power source
Security Code
1 Turn the power ON.
2 Do the step 4 through 7 operation, and enter
the Security Code.
Because authorization by the Security Code is
required when it’s removed from the vehicle,
personalizing this unit is by using the Security
Code is a help in preventing theft.
"Approved" is displayed.
The unit can be used.
•
•
The setup Security Code can be done when the
<Demonstration mode Setting> (page 50) is set as OFF.
When the Security Code function is activated, the code
can’t be changed and the function can’t be released.
Note, the Security Code can be set as the 4 digit number
of your choice.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
Display
"Beep : ON"
"Beep : OFF"
Setting
Beep is heard.
Beep canceled.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "Menu" is displayed, "Security" is displayed.
In Standby mode
3 Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "Security" is displayed.
Manual Clock Adjustment
•
This adjustment can be done when the <Synchronize
Clock> (page 43) is set as OFF.
4 Select the digits to enter
Push the Control knob to [4] or [¢].
1 Select Clock Adjustment mode
Push the Control knob to [FM] or [AM].
Select the "Clock Adjust" display.
5 Select the Security Code numbers
Push the Control knob to [FM] or [AM].
6 Repeat steps 4 and 5, and complete the
Security Code.
2 Enter Clock Adjust mode
Press the Control knob for at least 1 second.
The clock display blinks.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "Security" is
displayed.
3 Adjust the hours
Push the Control knob to [FM] or [AM].
Adjust the minutes
Push the Control knob to [4] or [¢].
8 Do the step 4 through 7 operation, and
reenter the Security Code.
"Approved" is displayed.
4 Exit Clock adjustment mode
Press the [MENU] button.
The Security Code function activates.
•
When the wrong Code is entered in steps 4 through 6,
repeat from step 4.
In Standby mode
Date Adjustment
1 Select Date Adjust mode
Push the knob to [FM] or [AM].
Select the "Date Adjust" display.
|
42
English
In Standby mode
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
3 Selecting the item (day, month, or year) to
adjust
Push the Control knob to [4] or [¢].
The items that are blinking are items that can be
adjusted.
Display
"DSI : ON"
"DSI : OFF"
Setting
LED flashes.
LED OFF.
4 Adjust each item
Push the Control knob to [FM] or [AM].
In Standby mode
5 Repeat step 3 and 4 operation and adjust the
date.
Selectable Illumination
Selecting the button illumination color as green
or red.
6 Exit Date adjustment mode
Press the [MENU] button.
Display
Setting
"Button : Red"
"Button : Green"
The illumination color is red.
The illumination color is green.
In Standby mode
Date Mode
In Standby mode
Setting the date format.
Dimmer
1 Select Date Mode
Push the Control knob to [FM] or [AM].
Select the "Date Mode" display.
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display
"Dimmer : ON"
"Dimmer : OFF"
Setting
The display dims.
The display doesn’t dim.
2 Select the date format
Push the Control knob to [4] or [¢].
3 Exit Menu mode
Press the [MENU] button.
Function of the KDC-MP728/KDC-MP628
In Standby mode
Switching preout
Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Function of the KDC-X889/KDC-MP828/KDC-X789
In Standby mode
Synchronize Clock
Display
"SWPRE : Rear"
"SWPRE : Sub-W"
Setting
Rear preout.
Subwoofer preout.
Synchronizing the RDS station time data and this
unit’s clock.
Display
Setting
"SYNC : OFF"
"SYNC : ON"
Adjust the time manually.
Synchronizes the time.
•
It takes 3 to 4 minutes to synchronize the clock.
English
|
43
Menu system
In Standby mode
Function of the KDC-X889/KDC-MP828/KDC-
MP7028/KDC-MP728/KDC-X789
In Standby mode
Built-in Amp Setting
Built-in amplifier is controlled.
Turning OFF this control enhances the preout
quality.
G-Analyzer Calibration setup
G-Analyzer requires calibration for horizontal
acceleration and braking.
Display
Setting
"AMP : ON"
"AMP : OFF"
The built-in amplifier activates.
The built-in amplifier deactivates.
•
Detection of horizontal and straight directions should
be done at horizontal location to go straight.
1 Park the vehicle at horizontal location
Function of the KDC-X889/KDC-MP828/KDC-
MP7028/KDC-MP728/KDC-X789
In Standby mode
2 Select G-Analyzer Calibration set mode
Push the Control knob to [FM] or [AM].
Select the "G-Calibration" display.
G-Counter Level set
Calibrating G-Counter. Setting the level according
to the kinds of vehicles.
3 Enter G-Analyzer Calibration set mode
Press the Control knob for at least 1 second.
"Stop" is displayed.
Display
Setting
"G-Counter: Level1"
"G-Counter: Level2"
"G-Counter: Level3"
Counter is easy to go up.
4 Start Calibration of horizontal direction
Press the Control knob.
Once "Move Forward" appears on the display, the
vehicle must be advanced.
Counter is hard to go up.
5 Start Calibration of straight direction
When the vehicle is driven on the straight
direction, calibration of straight direction
automatically starts.
•
In the case of less acceleration, set it up to "G-Counter:
Level1". In the case of frequent acceleration, set it up
to "G-Counter: Level3".
Function of the KDC-X889/KDC-MP828/KDC-
MP7028/KDC-MP728/KDC-X789
In Standby mode
•
In order to operate the detection of straight direction.
When the Calibration is finished, "Calibration OK"
is displayed.
G-Analyzer Reset
Resets the value of G-Meter and G-Counter.
•
If you fail to complete the calibraton, "No Calibration"
is displayed. In such a case, repeats step 1 thru 6.
1 Select G-Analyzer Reset mode
Push the Control knob to [FM] or [AM].
Select the "G-Reset" display.
6 Exit G-Analyzer Calibration set mode
Press the [MENU] button.
2 Enter G-Analyzer Reset mode
Press the Control knob for at least 1 second.
3 Select the Reset item
Push the Control knob to [FM] or [AM].
"G-Meter Reset": Reset the value of G-Meter.
"G-Counter Reset": Reset the value of G-Counter.
Function of the KDC-X889/KDC-MP828/KDC-
MP7028/KDC-MP728/KDC-X789
4 Reset the value
G-Analyzer Stop Watch
Press the Control knob for at least 2 seconds.
"Reset OK" is displayed.
The control of stop watch can be started by G-
Analyzer function.
5 Exit G-Analyzer Reset mode
Press the [MENU] button.
|
44
English
Other than Standby mode/
When the Dual Zone System is ON
•
Do not use G-Analyzer stop watch on the Public roads.
Dual Zone System Setting
1 Select G-Analyzer Stop Watch mode
Push the Control knob to [FM] or [AM].
Select the "Stop Watch" display.
Setting the Front channel and Rear channel
sound in the Dual Zone System.
Display
Setting
2 Enter G-Analyzer Stop Watch mode
Press the Control knob for at least 1 second.
"Stop" is displayed.
"Zone 2 : Rear" Sub source (Auxiliary input source) is to be rear
channel.
"Zone 2 : Front" Sub source (Auxiliary input source) is to be front
channel.
3 Enter Counter Ready mode
Press the Control knob.
"Ready" is displayed.
4 Start Count
Function of the KDC-X889/KDC-X789
Other than Standby mode
When G on the vertical direction is detected
during the traveling, the count is automatically
started.
B.M.S. (Bass Management System)
"Running" is displayed.
Adjust the bass boost level of the external
amplifier using the main unit.
•
You can also start the counter by pressing the Control
knob.
Display
Setting
Bass boost level is flat.
Bass boost level is low (+6dB).
Bass boost level is mid (+12dB).
Bass boost level is high (+18dB).
"AMP Bass : Flat"
"AMP Bass : +6"
"AMP Bass : +12"
"AMP Bass : +18"
5 Stop Count
Press the Control knob.
"Stop" is displayed.
•
The control will be started again when you accelerate
or press the Control knob.
Do the operation after step3.
•
•
Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When you Reset the Count
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass : +18" won’t work
correctly even if it’s selected.
(While "Stop" is displayed)
Press the Control knob for at least 2 seconds.
•
The reset of count can be done when the count is
stopped.
Function of the KDC-X889/KDC-X789
Other than Standby mode
6 Exit G-Analyzer Stop Watch mode
Press the [MENU] button.
B.M.S. Frequency Offset
Setting the central frequency boosted by B.M.S.
•
•
When "Running" is displayed (counted), the count is
continued on although G-Analyzer Stop Watch mode
is finished. If you want to stop the count, enter the
menu mode then press the control knob.
When Power off (ex; ACC OFF) while counting, the
value of 1 second or less will be "00".
Display
Setting
"AMP FREQ : Normal"
"AMP FREQ : Low"
Boost with the normal central frequency.
Drop the normal central frequency 20%.
English
|
45
Menu system
Function of the KDC-X889/KDC-X789
When LX AMP unit connecting
Receiving other traffic information stations
(In tuner source)
AMP Control
Push the Control knob to [4] or [¢].
You can control the LX AMP connected to the
unit.
•
Traffic information station switching can be done
when listening to the radio.
1 Select AMP Control mode
Push the Control knob to [FM] or [AM].
Select the "AMS Control" display.
In FM reception
2 Enter AMP Control mode
CRSC (Clean Reception System
Circuit)
Press the Control knob for at least 1 second.
3 Select the AMP Control item for adjustment
Push the Contol knob to [FM] or [AM].
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
•
For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
Display
Setting
"CRSC : ON"
"CRSC : OFF"
The CRSC is ON.
The CRSC is OFF.
4 Adjust the AMP Control item
Push the Control knob to [4] or [¢].
5 Exit AMP Control mode
Press the [MENU] button.
•
Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
•
You cannot use the LX AMP operation during standby
mode.
In HD Radio mode
Receive mode Setting
Sets the receive mode.
Function of the KDC-X889/KDC-MP828/KDC-X789
Traffic Information
1 Select the Receive mode
Push the Control knob to [FM] or [AM].
Select the "Receive Mode" display.
Switching to traffic information automatically
when a traffic bulletin starts even when you aren’t
listening to the radio.
2 Enter Receive mode
Press the Control knob for at least 1 second.
Display
"TI : OFF"
"TI : ON"
Setting
3 Set the Receive mode
The Traffic Information function is OFF.
The Traffic Information function is ON.
Push the Control knob to [FM] or [AM].
Each time the knob is pushed, the Receive mode
switches as shown below.
When a traffic bulletin starts, "Traffic INFO" is
displayed it and it switches to traffic information.
Receive mode Display
Operation
Auto mode
"Auto"
Analog broadcasts and digital
broadcasts will be switched
automatically.
•
•
During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it’s automatically
the remembered volume.
When both are being transmitted,
the digital broadcast will have
priority.
Digital
Analog
"Digital"
"Analog"
Digital broadcasts only.
Analog broadcasts only.
|
46
English
4 Exit Receive mode
Press the [MENU] button.
3 Select Auxiliary input display setting mode
Push the Control knob to [FM] or [AM].
Select the "Name Set" display.
4 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
•
Even if the "Auto" setting, and analog broadcast will
be received during the reception of a ball game mode
(non-delayed broadcast program).
5 Select the Auxiliary input display
Push the Control knob to [4] or [¢].
Each time the button is pressed, the display
In SIRIUS tuner source
switches as shown below.
• "AUX"/"AUX EXT"
• "DVD"
• "PORTABLE"
• "GAME"
SIRIUS ID (ESN) display
Displaying the SIRIUS ID (Electronic Serial
Number)
Display
• "VIDEO"
"ESN =************"
• "TV"
6 Exit Menu mode
Press the [MENU] button.
•
Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.
•
•
When operation stops for 10 seconds, the name at
that time is registered, and the Auxiliary input display
setting mode closes.
The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.
Auxiliary Input Display Setting &
Station/Disc Naming
For selecting the display when switched to
Auxiliary input source. For the Station/Disc
Naming refer to the <Station/Disc Naming (SNPS/
DNPS)> (page 18).
Text Scroll
Setting the displayed text scroll.
Display
Setting
"Scroll : Auto"
"Scroll : Manual"
Repeats scroll.
Scrolls when the display changes.
1 Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/"AUX EXT" display.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
•
The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Radio text
- Text for the SIRIUS tuner source, HD Radio source,
including Channel name, etc.
English
|
47
Menu system
In Standby mode
4 Select the downloading mode
Push the Control knob to [FM] or [AM].
Select the "DISP Data DL" display.
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
5 Enter the downloading mode
Press the Control knob for at least 1 second.
"File Check!!" is displayed.
Display
Setting
"Built in AUX : OFF" When selecting the source there’s no Auxiliary
Input.
6 Select files to be downloaded
Push the Control knob to [4] or [¢].
"Built in AUX : ON" When selecting the source there’s Auxiliary
Input.
7 Start downloading
Press the Control knob for at least 2 seconds.
"Downloading" is displayed.
When the downloading finishes, "Finished
Download" is displayed.
In Standby mode
CD Read Setting
When there is a problem on playing a CD with
special format, this setting play the CD by force.
•
Picture download may take as long as 10 minutes.
Quantity
Gradation Level
Display
Setting
"CD Read : 1"
"CD Read : 2"
Play CD and Audio file.
Play CD by force.
•
Setting "CD Read : 2" cannot play Audio file.
Some music CDs may not be played back even in the
"CD Read : 2" mode.
Canceling Downloading
Press the [MENU] button.
Function of the KDC-X889/KDC-MP828/KDC-X789
In Standby mode
8 Exit the downloading mode
Press the [MENU] button.
Picture downloading
Downloading movies and wallpapers.
Downloaded pictures can be used for the display
of this unit.
•
•
Do not operate this unit, while "Downloading" is
displayed, to prevent data from being damaged.
The number of files that can be downloaded.
- Downloaded movie: 1 file
1 Inset a CD-R/CD-RW.
Insert a CD-R/CD-RW containing files to be
downloaded into this unit.
- Wallpaper: 1 file
When a new movie is downloaded, it is overwritten to
the currently downloaded movie.
•
Also, when a new wallpaper is downloaded, it is
overwritten to the currently downloaded wallpaper.
There is no way to delete the downloaded pictures.
The downloaded pictures can be used for display.
<Graphic part/ Spectrum Analyzer Display Switching>
(page 20)
Refer to <Playing CD & Audio file> (page 32) for
details.
Our URL http://www.kenwood.net-disp.com
describes how to make CD-R/CD-RW.
•
•
2 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
<Wallpaper selecting> (page 21)
When you can’t download the pictures to this unit,
there may be a problem with the CD-R/CD-RW write
method.
and rewrite the CD-R/CD-RW.
3 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
|
48
English
Function of the KDC-X889/KDC-MP828/KDC-X789
Function of ACDrive disc
Function of the KDC-MP7028/KDC-MP728/KDC-
X789/KDC-MP628
Other than Standby mode
Voice Index
Audio Preset Memory
Setting the announcement during the play of AC
Drive disc.
Registering the value setup by Sound Control. The
memory can't be erased by the Reset button.
Display
"Voice Index : ON"
"Voice Index : OFF"
Setting
Guide is announced.
Not be announced.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 10)
- <Audio Setup> (page 12)
- <Equalizer Control> (page 16)
Function of the KDC-X889/KDC-MP828/KDC-X789
In CD mode
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
ACDrive firmware version display
Displaying the firmware version with the ACDrive
function.
3 Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "Audio Preset" display.
1 Select the firmware version display mode
Push the Control knob to [FM] or [AM].
Select the "ACD F/W Version" display.
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
2 Display the ACDrive firmware version
Push the Control knob to [4] or [¢].
5 Select the Audio Preset Memory
Push the Contol knob to [FM] or [AM].
Select the "Memory" display.
6 Put the Audio Preset in the memory
Press the Control knob for at lea st 2 seconds.
The "Memory" display blinks 1 time.
Function of the KDC-X889/KDC-MP828/KDC-X789
In CD mode
7 Exit Menu mode
Press the [MENU] button.
Unique ID display
Displaying the serial number for each product.
•
•
•
Register 1 pair of Audio Preset Memory. You can't
register by the source.
When you press the Reset, all the sources will be the
setting value which is registered.
The following items can't be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
1 Select the unique ID display mode
Push the Control knob to [FM] or [AM].
Select the "ACD Unique ID" display.
2 Display the unique ID
Push the Control knob to [4] or [¢].
English
|
49
Menu system
Function of the KDC-MP7028/KDC-MP728/KDC-
X789/KDC-MP628
Other than Standby mode
In Standby mode
Demonstration mode Setting
Sets the demonstration mode.
Audio Preset Call
Recalling the sound setup registered by <Audio
Preset Memory> (page 49).
1 Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO Mode" display.
1 Select the source
Press the [SRC] button.
2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches as shown
below.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3 Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "Audio Preset" display.
Display
"DEMO Mode : ON"
"DEMO Mode : OFF" Exit Demonstration mode (Normal mode).
Setting
The Demonstration mode function is ON.
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
5 Select the Audio Preset Call
Push the Contol knob to [FM] or [AM].
Select the "Call" display.
6 Call up the Audio Preset
Press the Control knob for at least 2 seconds.
The "Call" display blinks 1 time.
7 Exit Menu mode
Press the [MENU] button.
•
•
The User memory of <Equalizer Control> (page 16) is
changed to the value which was recalled.
The source tone memory item of <Audio Control>
(page 10) is changed to the value which was recalled
by the selected source.
|
50
English
Basic Operations of remote
SRC
ATT
VOL
SRC
AT T
VOL
38
AUD
AUD
38
FM+
4
¢
4/¢
AM–
2-ZONE
ABC
FM/AM/+/–
DIRECT
/OK
DIRECT
DEF
2-ZONE
GHI
JKL
MNO
WXY
[0] — [9]
PRS
TUV
QZ
R.VOL
Loading and Replacing the battery
Basic operations
Use two "AA"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
[VOL] buttons
Adjusting the volume.
[SRC] button
Each time the button is pressed, the source
switches.
For the source switching order refer to <Selecting
the Source> (page 10).
[ATT] button
Turning the volume down quickly.
When it is pressed again, it returns to the
previous level.
[
] button
Adjusting the Faceplate Angle.
2WARNING
•
•
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
Do not set the remote on hot places such as above
the dashboard.
English
|
51
Basic Operations of remote
Audio Control
In Tuner source
[AUD] button
[FM]/ [AM] buttons
Select the Audio item for adjustment.
Select the band.
Each time the [FM] button is pressed, it switches
between the FM1, FM2, and FM3 bands.
[VOL] buttons
Adjust the Audio item.
[4]/ [¢] buttons
Tune up or down band.
•
•
Refer to <Audio Control> (page 10/12) for the
operation method, such as the procedures of Audio
control and others.
Only selecting and adjusting of the Basic Audio item
can be done by the remote control. Selecting and
adjusting of the Detail Audio item cannot be done.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 28) mode.
[38] button
Enters and cancels the <PTY (Program Type)>
(page 30) mode.
Dual Zone System
[2-ZONE] button
Each time the button is pressed, "2 ZONE" of
<Audio Setup> (page 12/13) is turned ON and
OFF.
In Disc source
[4]/ [¢] buttons
[5]/ [∞] buttons
Adjusts the volume of the rear channel.
It activates while the Dual Zone System is ON.
Doing track/file forward and backward.
[+]/ [–] buttons
Doing disc/folder forward and backward.
[38] button
Each time the button is pressed, the song pauses
and plays.
[0] — [9] buttons
When in <Direct Track/File Search> (page 33) and
<Direct Disc Search> (page 33), enter the track/
file/disc number.
|
52
English
In SIRIUS tuner source
[FM] button
Select the preset band.
[4]/ [¢] buttons
Search up or down channel.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset channels.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 38) mode.
In HD Radio source
[FM] button
Select the HD FM band.
Each time the [FM] button is pressed, it switches
between the HF1, HF2, and HF3 bands.
[AM] button
Select the HD AM band.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
English
|
53
Accessories/ Installation Procedure
Accessories
2WARNING
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect those
wires to the power source running through the fuse box.
1
..........1
..........2
..........4
..........4
..........1
•
If the power is not turned ON (or it is ON, but will be OFF
immediately), the speaker wire may have a short-circuit
or touched the chasis of the vehicle and the protection
function may have been activated. Therefore, the speaker
wire should be checked.
If your car’s ignition does not have an ACC position,
connect the ignition wires to a power source that can be
turned on and off with the ignition key. If you connect
the ignition wire to a power source with a constant
voltage supply, as with battery wires, the battery may die.
If the console has a lid, make sure to install the unit so
that the faceplate will not hit the lid when closing and
opening.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with
one with the same rating.
Insulate unconnected wires with vinyl tape or other
similar material. To prevent a short circuit, do not remove
the caps on the ends of the unconnected wires or the
terminals.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail
to work if you share the - wires or ground them to any
metal part in the car.
When only two speakers are being connected to the
system, connect the connectors either to both the front
output terminals or to both the rear output terminals
(do not mix front and rear). For example, if you connect
the + connector of the left speaker to a front output
terminal, do not connect the - connector to a rear
output terminal.
2
3
4
5
•
•
•
•
•
•
Installation Procedure
1. To prevent a short circuit, remove the key from
the ignition and disconnect the - battery.
2. Make the proper input and output wire
connections for each unit.
3. Connect the speaker wires of the wiring harness.
•
•
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mount the unit so that the mounting angle is 30° or less.
4. Connect the wiring harness wires in the
following order: ground, battery, ignition.
5. Connect the wiring harness connector to the
unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the reset button.
|
54
English
Connecting Wires to Terminals
A
B
A
B
Subwoofer right output
(Red)
Rear right output
(Red)
KDC-X979/
X789/MP828/
MP7028
Subwoofer left output
(White)
Rear left output
(White)
KDC-MP728/
MP628
Rear right output (Red)/
Subwoofer right output (Red)
Front right output (Red)
Front left output (White)
AUX right input (Red)
AUX left input (White)
FRONT
AUX IN
Rear left output (White)/
Subwoofer left output (White)
To KENWOOD disc changer/
External optional accessory
To connect these leads,
refer to the relevant
instruction manuals.
FM/AM antenna input
Fuse (10A)
If no connections are made, do not let the wire come out from the tab.
Wiring harness
(Accessory1)
When using the optional power amplifier, connect
to its power control terminal.
P.CONT
Power control wire (Blue/White)
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
or to the power terminal for the booster amplifier of
the film-type antenna.
ANT.
CONT
Motor antenna control wire
(Blue)
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
MUTE
TEL mute wire (Brown)
To "EXT.AMP.CONT." terminal of the amplifier having
the external amp control function.
External amplifier control wire
(Pink / Black) (KDC-X889/X789 only)
To car light control switch
Dimmer control wire (Orange
/ White)
White/Black
To front left
speaker
White
FRONT • L
Gray/Black
Gray
To front right
speaker
FRONT • R
REAR • L
REAR • R
Green/Black
Green
To rear left
speaker
Purple/Black
Purple
To rear right
speaker
Ignition key
switch
ACC
Ignition wire (Red)
Car fuse box
Car fuse box
(Main fuse)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
–
+
Battery
English
|
55
Installation
non-Japanese cars
Japanese cars
1 Refer to the section <Removing the hard rubber
frame> (page 58) and then remove the hard
rubber frame.
2 Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and
secure the unit with the accessory screws.
Metal mounting strap
(commercially available)
Firewall or metal support
T
N
T/N
T
N
Bend the tabs of the
T: Toyota cars
N: Nissan cars
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
8 mm
MAX.
Self-tapping screw
(commercially available)
8 mm
MAX.
3
4
M5mm
M5mm
Screw (M4X8)
(commercially available)
Accessory3...for Nissan car
Accessory4 ...for Toyota car
•
Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (for example, the
sound may skip).
•
•
During installation, do not use any screws except for
those provided. The use of different screws might result
in damage to the main unit.
Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
|
56
English
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main
unit so that it does not fall off, screw in the
provided screws in the holes shown below.
Bottom panel
Accessory5
•
Never insert the screw in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.
English
|
57
Removing the Unit
Removing the hard rubber frame
Removing the Unit
1 Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
1 Refer to the section <Removing the hard rubber
frame> (page 58) and then remove the hard
rubber frame.
2 Remove the screw (M4 × 8) on the back panel.
3 Insert the two removal tools deeply into the slots
on each side, as shown.
Screw (M4X8)
(commercially available)
Lock
Catch
Accessory2
Removal tool
2 When the upper level is removed, remove the
lower two locations.
Accessory2
Removal tool
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
•
The frame can be removed from the bottom side in the
same manner.
•
Be careful to avoid injury from the catch pins on the
removal tool.
5 Pull the unit all the way out with your hands,
being careful not to drop it.
|
58
English
Troubleshooting Guide
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
? Even if Loudness is turned ON, high-pitched tone
isn’t compensated for.
✔
Tuner source is selected.
☞
High-pitched tone isn’t compensated for when
in Tuner source.
? No sound can be heard, or the volume is low.
General
✔
The fader or balance settings are set all the way to
one side.
? The power does not turn ON.
☞
Center the fader and balance settings.
✔
The fuse has blown.
✔
The input/output wires or wiring harness are
connected incorrectly.
☞
After checking for short circuits in the wires,
replace the fuse with one with the same
rating.
☞
Reconnect the input/output wires or the
wiring harness correctly. See the section on
<Connecting Wires to Terminals>.
✔
The speaker wire has a short-circuit or touches
the chassis of the vehicle, and then the protection
function is activated.
✔
✔
The values of Volume offset are low.
☞
Turn up the Volume offset, referring to the
section on <Audio Setup> (page 12/13).
☞
Wire or insulate the speaker cable properly
and press the reset button.
The <Built-in Amp Setting> (page 44) is OFF.
Turn it ON.
? There’s a source you can’t switch.
☞
✔
There’s no media inserted.
? The sound quality is poor or distorted.
☞
Set the media you want to listen to. If there’s
no media in this unit, you can’t switch to each
source.
✔
One of the speaker wires is being pinched by a
screw in the car.
☞
Check the speaker wiring.
✔
The Disc changer isn’t connected.
✔
The speakers are not wired correctly.
☞
Connect the Disc changer. If the Disc changer
isn’t connected to it’s input terminal, You can’t
switch to an external disc source.
☞
Reconnect the speaker wires so that each
output terminal is connected to a different
speaker.
? The memory is erased when the ignition is
turned OFF.
? The Touch Sensor Tone doesn’t sound.
The preout jack is being used.
✔
✔
The ignition and battery wire are incorrectly
☞
The Touch Sensor Tone can’t be output from
the preout jack.
connected.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
? Even though Synchronize Clock is ON, the clock
can’t be adjusted.
? The TEL mute function does not work.
The TEL mute wire is not connected properly.
✔
The received RDS station isn’t sending time data.
✔
☞
Receive another RDS station.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
? The Dimmer function doesn’t work.
✔
The Dimmer wire isn’t connected correctly.
Check the Dimmer wire connection.
The <Dimmer> (page 43) is OFF.
Turn it ON.
? The TEL mute function turns ON even though the
TEL mute wire is not connected.
☞
✔
✔
The TEL mute wire is touching a metal part of the
☞
car.
☞
Pull the TEL mute wire away from the metal
part of the car.
? The sound is not output from Subwoofer or it
outputs the different sound.
✔
When "2 ZONE" of <Audio Setup> (page 12/13) is
set to ON.
☞
Turn OFF "2 ZONE".
? There are no audio control effects.
✔
FOCUS/ SRS 3D item on <WOW Control> (page
17) have no effect in rear output.
☞
---
English
|
59
Troubleshooting Guide
Tuner source
Disc source
? Radio reception is poor.
? "AUX EXT" is displayed without achieving
✔
The car antenna is not extended.
External disc control mode.
☞
Pull the antenna out all the way.
✔
Unsupported disc changer is connected.
✔
The antenna control wire is not connected.
☞
Use the disc changer mentioned in the
<About CD players/disc changers connected
to this unit> (page 4) of the section on <Safety
precautions>.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
? The desired frequency can’t be entered with the
Direct Access Tuning.
✔
? The specified disc does not play, but another one
plays instead.
A station that can’t be received is being entered.
☞
Enter a station that can be received.
✔
The specified CD is quite dirty.
✔
You’re trying to enter a frequency with a 0.01 MHz
unit.
☞ Clean the CD.
The disc is loaded in a different slot from that
specified.
✔
☞
What can be designated in the FM band is to
0.1 MHz.
☞
Eject the disc magazine and check the
number for the specified disc.
? It isn’t the set Traffic information sound volume.
✔
The disc is severely scratched.
Try another disc instead.
✔
The set sound volume is less than the tuner sound
volume.
☞
☞
If the tuner sound volume is louder than the
set sound volume,the tuner sound volume is
used.
? Can’t remove disc.
The cause is that more than 10 minutes has
✔
elapsed since the vehicle ACC switch was turned
OFF.
☞
The disc can only be removed within 10
minutes of the ACC switch being turned OFF.
If more than 10 minutes has elapsed, turn
the ACC switch ON again and press the Eject
button.
? The disc won’t insert.
There’s already another disc inserted.
Press the [0] button and remove the disc.
✔
☞
? Direct Search can’t be done.
Another function is ON.
Turn Random Play or other functions OFF.
✔
☞
? Track Search can’t be done.
For the discs/folders first or last song.
✔
☞
For each disc/folder, Track Search can’t be
done in the backward direction for the first
song or in the forward direction for the last
song.
|
60
English
Audio file source
The messages shown below display your
systems condition.
? Cannot play an Audio file.
✔
The media is scratched or dirty.
Eject:
No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
➪ Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
? The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
No Disc:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
✔
The recording condition is bad.
Record the media again or use another media.
☞
TOC Error:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
? The Audio file track time isn’t displayed correctly.
✔
---
☞
There are times when it isn’t displayed
correctly according to the Audio file recording
conditions.
Error 05:
The CD is upside-down.
➪ Load the CD correctly.
HD Radio source
?
No sound can be heard, or the volume is low.
Blank Disc:
No Track:
Nothing has been recorded on the MD.
✔
The preset broadcast station is not transmitting
in the mode that was set with <Receive mode
Setting> (page 46).
No tracks are recorded on the MD,
although it has a title.
☞
Please set <Receive mode Setting> to "Auto".
✔
In digital AM broadcasting, receive mode switches
between stereo and monaural too often.
Error 15:
Media was played that doesn’t have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
☞
Receiving condition is bad or unstable.
Stereo is chosen when receiving condition is
good, and it switches to monaural when the
condition becomes bad.
No Panel:
Error 77:
The faceplate of the slave unit being
connected to this unit has been removed.
➪ Replace it.
✔
HD Radio tuner is connected to KCA-S210A or
other units.
☞
Connect the HD Radio tuner directly to the
control unit.
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If
the "Error 77" code does not disappear,
consult your nearest service center.
Mecha Error: Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.
➪ Check the disc magazine. And then
press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
English
|
61
Troubleshooting Guide
Hold Error:
The protective circuit in the unit activates
Can’t Download:
Download Error:
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪ Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
This unit does not work properly for some
reason.
➪ Press the reset button to download
it again. If this error is still displayed,
consult a local Kenwood dealer.
No Display File:
No file that can be downloaded is
contained in the CD-ROM.
No Name:
Waiting:
Attempted to display DNPS during the CD
play having no disc names preset.
➪ Make sure that a files created with
disp.com> is contained in the CD-ROM.
Do not delete the extension (.kbm)
created when the file was created.
Radio text data is being received.
Text for the Sirius tuner source is being
received.
Load:
Discs are being exchanged in the Disc
changer.
Incorrect File: The file selected to be downloaded has a
format that this unit cannot read.
Reading:
IN (Blink):
The unit is reading the data on the disc.
➪ Recreate the file.
The CD player section is not operating
properly.
Writing Error: Writing failed while the file was
downloaded.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
➪ Try the downloading again.
DEMO MODE: The Demonstration mode has been
selected.
➪ The <Demonstration mode Setting>
(page 50) is ON. Turn it OFF.
Unsupported File:
An Audio file is played with a format that
this unit can’t support.
➪ ----
Copy Protection:
A copy-protected file is played.
➪ ----
|
62
English
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range (200 kHz space)
: 87.9 MHz – 107.9 MHz
Maximum output power
: 50 W x 4
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 µV/75 Ω)
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 µV/75 Ω)
Tone action
(KDC-MP7028/MP728/X789/MP628)
Frequency response ( 3.0 dB)
Bass : 100 Hz 10 dB
Middle : 1 kHz 10 dB
Treble : 10 kHz 10 dB
(KDC-X889/MP828)
Band 1 : 60 – 200 Hz 9 dB
Band 2 : 250 Hz – 1 kHz 9 dB
Band 3 : 1.25 kHz – 4 kHz 9 dB
Band 4 : 5 kHz – 16 kHz 9 dB
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 70 dB
Selectivity ( 400 kHz)
: ≥ 80 dB
Stereo separation (1kHz)
: 40 dB
Preout level / Load (during disc play)
AM tuner section
Frequency range (10 kHz space)
: 530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB)
: 28dBµ (25 µV)
: 2500 mV/10 kΩ (KDC-MP728/MP628)
: 4000 mV/10 kΩ (KDC-MP7028)
: 5000 mV/10 kΩ (KDC-X889/X789/MP828)
Preout impedance (during disc play)
: ≤ 600 Ω (KDC-MP728/MP628)
: ≤ 80 Ω (KDC-X889/MP7028/X789/MP828)
CD player section
Laser diode
: GaAlAs
Auxiliary input
Digital filter (D/A)
: 8 Times Over Sampling
Frequency response ( 1 dB)
: 20 Hz – 20 kHz
D/A Converter
: 1 Bit
Input Maximum Voltage
: 1200 mV
Spindle speed (Audio file)
: 1000 – 400 rpm (CLV 2times)
Input Impedance
: 100 kΩ
Wow & Flutter
: Below Measurable Limit
Frequency response ( 1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.01 % (KDC-MP828/MP7028/MP728/MP628)
: 0.008 % (KDC-X889/X789)
Signal to Noise ratio (1 kHz)
: 105 dB (KDC-MP7028/MP728/MP628)
: 110 dB (KDC-X889/MP828/X789)
Dynamic range
: 93 dB
General
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W x H x D)
: 7-3/16 x 2-1/16 x 6-1/10 inch
182 x 53 x 155 mm
Weight
: 3.31 lbs (1.5 kg)
Channel separation
: 96 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ".m4a" files
English
|
63
|