MONITOR WITH DVD RECEIVER
KVT-727DVD
KVT-627DVD
INSTRUCTION MANUAL
KVT-727DVD
KVT-627DVD
© B64-3103-00/00 (EV/E2V)
Source Select.............................................. 49
Displaying the Control screen
Sound Effects Menu (KVT-727DVD) ......... 78
Sound Effects Menu .............................................78
Displaying the Control screen
Displaying the Source Select screen
Displaying the Sound Effects Menu screen
Adjusting the Monitor Display Position
and Quality............................................. 50
Displaying the Screen Control screen
Audio Control ........................................................79
Displaying the Audio Control 1 screen
Displaying the Audio Control 2 screen
Displaying the Angle Control screen
Equalizer ................................................................80
Displaying the Equalizer screen
Parametric Equalizer
Setup Menu................................................ 51
Setup Menu............................................................51
Displaying the Control screen
Surround Control ..................................................82
Displaying the Surround Control screen
Surround Control Adjustment
Displaying the Setup Menu screen
Audio Set Up (KVT-727DVD) ...............................52
Displaying the Car Type Set Up screen
Displaying the Speaker Set Up screen
Displaying the Channel Level screen
Speaker Set Up
SRS WOW Control .................................................84
Displaying the SRS WOW Control screen
SRS WOW Uesr Setup
Position ..................................................................86
Displaying the Position screen
Position Adjust
Channel Level
DTA Setup
Crossover Network Setup
Stores the Preset adjustment setup
Calls the Preset adjustment setup
Audio Set Up (KVT-627DVD) ...............................58
Displaying the Audio Set Up screen
Crossover Network Setup
Sound Effects Menu (KVT-627DVD) ......... 88
DVD Setup .............................................................60
Displaying the DVD SETUP 1 screen
Displaying the DVD SETUP 2 screen
Displaying the DVD SETUP 3 screen
Language Setup
Sound Effects Menu .............................................88
Displaying the Control screen
Displaying the Sound Effects Menu screen
Audio Control ........................................................89
Displaying the Audio Control 1 screen
Displaying the Audio Control 2 screen
Parental Level Setup
System Setup ........................................................64
Displaying the System 1 screen
Displaying the System 2 screen
Equalizer ................................................................90
Displaying the Equalizer screen
Tone curve setup
AV Interface ...........................................................66
Displaying the AV I/F 1 screen
Displaying the AV I/F 2 screen
Zone Control ............................................. 92
Displaying the Zone Control screen
Displaying the AV I/F 3 screen
Muting Audio Volume upon Reception of
Phone call ............................................... 93
Muting Audio Volume upon Reception of Phone
call
User Interface ........................................................68
Displaying the User I/F 1 screen
Displaying the User I/F 2 screen
Touch Panel Adjustment
Clock
Security Code Setup
Set Up Memory
Glossary...................................................... 94
Troubleshooting Guide ............................. 95
Specifications ......................................... 100
TV Setup .................................................................73
Displaying the TV1 Area Set screen
Displaying the TV2 Area Set screen
RDS Setup...............................................................74
Displaying the RDS Set UP1 screen
Displaying the RDS Set UP2 screen
AMP Control...........................................................75
Displaying the AMP Control screen
DAB Set Up ............................................................76
Displaying the DAB Set Up screen
Announcement Selection
|
English
3
Before Use
Audio units you can control from the
KVT-727DVD/627DVD Receiver (As of June,
2005):
KTC-V500E, KTC-9090DAB, KHD-C710, KDC-CPS89, KDC-CPS87,
KDC-CPS85, KDC-CPS82, KDC-C719, KDC-C717, KDC-C715,
KDC-C712, KDC-C669, KDC-C667, KDC-C665, KDC-C662,
KDC-C469, KDC-C467, KDC-C465, KDC-C462, KDV-C820,
KDC-C719MP, KDC-D301, KDC-D300, KMD-D400, KMD-D401
2WARNING
To prevent injury or fire, take the following
precautions:
•
To prevent a short circuit, never put or leave any metallic
objects (such as coins or metal tools) inside the unit.
•
Do not touch the liquid crystal fluid if the LCD is damaged
or broken due to shock. The liquid crystal fluid may be
dangerous to your health or even fatal.
(Set the "O-N" switch to "N" position if provided.)
If the liquid crystal fluid from the LCD contacts your body or
clothing, wash it off with soap immediately.
Navigation units you can control from the
KVT-727DVD/627DVD Receiver (As of June,
2005):
2CAUTION
KNA-DV3200, KNA-DV2200
To prevent damage to the machine, take
the following precautions:
Make sure to ground the unit to a negative 12V DC power
supply.
Do not install the unit in a spot exposed to direct sunlight
or excessive heat or humidity. Also avoid places with too
much dust or the possibility of water splashing.
Do not place the faceplate or the faceplate case in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
Loading and Replacing the
battery
1. Use two "R03"/"AAA"-size batteries.
Slide the cover while pressing
downwards to remove it as
illustrated.
2. Insert the batteries with the + and
- poles aligned properly, following
the illustration inside the case.
•
•
•
•
•
•
To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Do not subject the faceplate to excessive shock, as it is a
piece of precision equipment.
When replacing a fuse, only use a new fuse with the
prescribed rating. Using a fuse with the wrong rating may
cause your unit to malfunction.
Do not use your own screws. Use only the screws provided.
If you use the wrong screws, you could damage the unit.
2WARNING
Store unused batteries out of the reach of children. Contact a
doctor immediately if the battery is accidentally swallowed.
•
Do not set the remote control on hot places such as above the
dashboard.
•
•
You cannot view video pictures whilst the vehicle is moving.
To enjoy TV/video pictures, find a safe place to park and
engage the parking brake.
•
•
The provided batteries are intended for use in operation
checking, and their service life may be short.
When the remote controllable distance becomes short, replace
both of the batteries with new ones.
NOTE
•
If you experience problems during installation, consult your
Kenwood dealer.
Cleaning the panel and monitor
When the operator panel and monitor panels are dirty, wipe
and clean them using a soft cloth (such as a commercially
available silicon coated cloth). When contaminated
excessively, clean them using a cloth dipped in a neutral
detergent first, then remove the detergent using a dry cloth.
Do not use a hard cloth and a volatile chemical (such as
an alcohol). If used, the panel surface may be scratched or
printed letters may be erased.
•
If the unit fails to operate properly, press the Reset button
to restore factory settings.
OPEN/CLOSE
ATT
DISP
Reset button
Cleaning the disc slot
As dust can accumulate in the disc slot, clean it occasionally.
Your discs can get scratched if you put them in a dusty disc
slot.
Screen brightness during low temperatures
When the temperature of the unit falls such as during winter,
the liquid crystal panel's screen will become darker than usual.
Normal brightness will return after using the monitor for a
whilst.
Lens Fogging
Right after you turn on the car heater in cold weather, dew
or condensation may form on the lens in the disc player of
the unit. Called lens fogging, discs may be impossible to
play. In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not operate
normally after a whilst, consult your Kenwood dealer.
|
4
English
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.
1
5
2
1
2
1
4
5
2
4
Icons on the DVD discs
Icon
Description
Indicates the region code where the disc can be played.
Number of voice languages recorded with the audio function. The number in the icon indicates the number
of voice languages. (Max. 8 languages)
8
Number of subtitle languages recorded with the subtitle function. The number in the icon indicates the
number of subtitle languages. (Max. 32 languages)
32
Number of angles provided by the angle function. The number in the icon indicates the number of angles.
(Max. 9 angles)
9
Aspect ratios that can be selected. "LB" stands for Letter Box and "PS" for Pan/Scan. In the example on the left,
the 16:9 video can be converted into letter box video.
16:9 LB
Unplayable discs
This player cannot play back any of the following discs.
• DVD-ROM/DVD-RAM discs
• HQ-VCD/SVCD discs
• CDV discs (Only the audio part can be reproduced)
• Photo CD discs
• CD-G/CD-EG/CD-EXTRA discs (Only the audio can be reproduced)
• DVD-Audio
Also, you cannot play back the DVD-R/RW and DVD+R/RW discs if not recorded in the DVD-Video format.
Explanation of icons used on this manual
Restrictions due to difference between discs
Some DVD and VCD discs can be played
Inhibition
icon
Indicates the key operation on the receiver.
Indicates the button you must touch.
only in certain playback modes according
to the intentions of the software producers.
As this player plays discs according to their
intentions, some functions may not work as
intended by you. Please be sure to read the
instructions provided with each disc. When an
inhibition icon is displayed on the monitor, it
indicates that the disc being played is under
the restriction as described above.
Indicates the key or joystick operation on the
remote controller.
The initial value of each setup is shown.
Gives an additional information or an operation
advice.
The illustrations of the display and the panel appearing
in this manual are examples used to explain more clearly
how the controls are used. Therefore, what appears on the
display in the illustrations may differ from what appears
on the display on the actual equipment, and some of
the illustrations on the display may represent something
impossible in actual operation.
|
English
5
Notes on playing MP3/WMA/JPEG/MPEG
This unit can play MP3 (MPEG1 Audio Layer 3)/
WMA/JPEG/MPEG (MPEG 1/MPEG 2). Note, however,
•
•
•
•
•
Play mode may not be possible when portions of the functions
that the MP3/WMA/JPEG/MPEG recording media
and formats acceptable are limited. When writing
MP3/WMA/JPEG/MPEG, pay attention to the
following restrictions.
of Windows Media Player 9 or higher are used.
*1 A part of picture will not be displayed if the size of a picture
exceeds maximum.
*2 A picture will not be displayed if the size of a picture exceeds
maximum.
Acceptable media
When you write for MPEG 2 data, please be sure to use DVD
media.
When you write data in DVD media, please be sure to set a setup
of a DVD writer to "Disc at once".
The MP3/WMA/JPEG/MPEG recording media acceptable to
this unit are CD-ROM, CD-R, CD-RW,DVD-R/RW and DVD+R/
RW.
When using CD-RW, do full format not quick format to prevent
malfunction.
Entering ID3 tag
The Displayable ID3 tag is ID3 version 1.x.
For the character code, refer to the List of Codes.
Acceptable medium formats
The following formats are available for the media used in this
unit. The maximum number of characters used for file name
including the delimiter (".") and three-character extension are
indicated in parentheses.
• ISO 9660 Level 1 (12 characters)
• ISO 9660 Level 2 (31 characters)
• Joliet (64 characters)
• Romeo (128 characters)
Up to 200 characters can be displayed in the long file name
format. For a list of available characters, see the instruction
manual of the writing software and the section Entering file
and folder names below.
The media reproducible on this unit has the following
limitations:
• Maximum number of directory levels: 8
• Maximum number of files per folder: 255
• Maximum number of characters for folder name: 200
• Maximum number of folders: 254
MP3/WMA/JPEG/MPEG written in the formats other than the
above may not be successfully played and their file names or
folder names are not properly displayed.
Entering file and folder names
You can use only characters shown on the code table for file
name and folder name.
If you use any other character for entry, the file and folder
names are not displayed correctly. They may neither be
displayed correctly depending on the CD/DVD writer used.
The MP3/WMA/JPEG/MPEG file must have the MP3/WMA/
JPEG/MPEG extension (.mp3/.wma/.jpg/.mpg).
Settings for your MP3/WMA/JPEG/MPEG encoder
and CD/DVD writer
Do the following setting when compressing audio data in
MP3/WMA data with the MP3/WMA encoder.
MP3/WMA
• Transfer bit rate: MP3: 32 —320 kbps
WMA: 48 —192 kbps
• Sampling frequency: MP3: 32, 44.1, 48 kHz
WMA: 32, 44.1, 48 kHz
•
A file with a name entered with characters not on the code list
may not play correctly.
Writing files into a medium
When a medium containing MP3/WMA/JPEG/MPEG data is
loaded, the unit checks all the data on the medium. If the
medium contains a lot of folders or non-MP3/WMA/JPEG/
MPEG files, therefore, it takes a long time until the unit starts
playing MP3/WMA/JPEG/MPEG.
In addition, it may take time for the unit to move to the next
MP3/WMA/JPEG/MPEG file or a File Search or Folder Search
may not be performed smoothly.
Do the following setting when compressing video/audio data
in JPEG/MPEG data with the JPEG/MPEG encoder.
JPEG
• Picture size: Baseline format: 5,120 (W) x 3,840 (H) pixels
(Maximum size)*1
Progressive format: 2,048 (W) x 1,536 (H) pixels
Loading such a medium may produce loud noise to damage the
speakers.
•
(Maximum size)*2
MPEG
Do no attempt to play a medium containing a non-MP3/WMA/
JPEG/MPEG file with the MP3/WMA/JPEG/MPEG extension.
The unit mistakes non-MP3/WMA/JPEG/MPEG files for MP3/
WMA/JPEG/MPEG data as long as they have the MP3/WMA/
JPEG/MPEG extension.
Do not attempt to play a medium containing non MP3/WMA/
JPEG/MPEG.
• Video format: MPEG1, MPEG2
• Picture size: MPEG1: 320x240, 352x240 (NTSC), 352x288 (PAL)
MPEG2: 640x480, 704x480 (NTSC), 704x576 (PAL)
• Audio format: MPEG1 Audio Layer2
• Transfer bit rate: 32—384 kbps CBR
• Sampling frequency: 32, 44.1,48 kHz
•
When you use your CD/DVD writer to record MP3/WMA/JPEG/
MPEG up to the maximum disc capacity, disable additional
writing. For recording on an empty disc up to the maximum
capacity at once, check Disc at Once.
|
6
English
MP3/WMA/JPEG/MPEG playing order
When selected for play, Folder Search, File Search, or for Folder
Select, files and folders are accessed in the order in which they
were written by the CD/DVD writer.
Because of this, the order in which they are expected to be
played may not match the order in which they are actually
played. You may be able to set the order in which MP3/WMA/
JPEG/MPEG are to be played by writing them onto a medium
such as a CD-R with their file names beginning with play
sequence numbers such as "01" to "99", depending on your
CD/DVD writer.
JPEG
JPEG is a standardized image compression mecha-
nism. JPEG stands for Joint Photographic Experts
Group, the original name of the committee that
wrote the standard. JPEG is designed for compress-
ing either full color or gray scale images.
MPEG 1
The most common implementations of the MPEG
1 standard provide a video resolution of 352-by-
240 at 30 frames per second (fps). This produces
video quality slightly below the quality of conven-
tional VCR videos.
MPEG 2
MPEG 2 offers resolutions of 720x480 and
1280x720 at 60 fps (NTSC), with full CD-quality
audio. This is sufficient for all the major TV stan-
dards, including NTSC, and even PAL. MPEG 2 is
used by DVD-ROMs. MPEG-2 can compress a 2-
hour video into a few gigabytes.
|
English
7
Opening/Closing the Monitor and Power Switch
Open the monitor
[OPEN/CLOSE] key
Close the monitor
Turn the power on
Hold down the [SRC] key more than
one second to turn it off.
[SRC] key
•
•
Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components,
you may be hurt or the equipment may be damaged.
Do not try to open or close the monitor by hand.
•
•
You can automatically open or close the monitor when you turn on or off the ignition key (page 50).
If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement is
canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also canceled
by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] key again.
|
8
English
Removing/Attaching the Protection Panel
Remove the protection panel
Attach the protection panel
Two hooks
Place the right end of the protection panel onto
hooks and push it until clicked and locked.
Then, push the left end of the panel to lock it.
•
•
•
Close the monitor first, then remove or attach the protection panel.
After you have removed the protection panel, you cannot operate the receiver.
After you have removed the protection panel, you can flash the burglar alarm lamp (page 70).
|
English
9
KVT-727DVD/627DVD Basic operations
■When the monitor is open
S
M
V
F
OPEN/CLOSE
ATT
AUTO
■When the monitor is closed
OPEN/CLOSE
ATT
AUTO
1
2
3
Play Disc
[Disc insertion slot]
A disc is played when you insert it.
4
5
6
Search Selectors
[22]/[33] key
Searches a disc backward or forward.
Stop to Play
[7] key
Stops to play.
Eject Disc
[Eject] key
The disc is ejected.
Play/Pause
[38] key
Pauses and replays a disc.
Video source selection/V.OFF
[V.SEL]key
Video source selection changes in the following order
each time you press the key.
|
10
English
Band/Folder Selectors
[FM]/[AM] key
[FM] key switches to the FM1/2/3 band or next folder/
disc.
[AM] key switches to the AM band or previous folder/
disc.
DVD/VCD
TV */ Video
R-CAM *
p
Attenuater
[ATT] key
Attenuaters the volume.
Navigation *
Press it again to cancel muting.
* Optional accessory
Traffic Information
[TI] key
Hold down more than 1 second to turn the Traffic
Information function On or Off. (page 36)
You can also turn off the video display by pressing the
key longer than 1 second.
When you press the key again, the previous video
display comes back on.
q
w
Screen Setup
[SCREEN] key
Displays the Screen Setup or Angle Setup screen.
(page 50)
7 Audio Source Selection/Power Supply
[SRC] key
Audio source selection changes in the following order
each time you press the key.
Function/AV OUT SEL
[FNC] key
The video source function changes in the following
order each time you press the key.
DAB *
TUNER
Picture & Easy Control Panel
Source Control
Built-in Disc player
External Disc player *
TV */ Video
Picture
External Disc Changer *
AUX EXT *
Switches the source that is output at the AV OUTPUT
terminal when it is pressed more than 1 second.
e
Switch Screen Mode/M.CTRL
[MODE] key
Navigation *
Switches the screen mode. (page 16)
The DVD Disc Menu screen appears when you hold
down the key more than 1 second. (page 22)
Standby Mode
* Optional accessory
You can also turn off the power by pressing the key
longer than 1 second.
When you press the key again,the power turns on.
•
DVD Disc Menu is not available when the top menu of the
DVD is shown.
r
Seek Mode
[AUTO] key
Selects the Seek mode.
8 Volume Controls
[5]/[∞] key
Adjusts the volume.
(see page 34/40/44 for the <Seek Mode>)
9 Joystick
Track/Station Selectors
[4]/[¢] key
Selects a music or chapter, track, or frequency.
•
•
Aside from the navigation system, the display turns on
when you apply the parking brake.
It is necessary to set "Navigation Source" of <AV Interface>
to "On" to add Navigation as an audio source that can be
selected the with [SRC] key. (page 67)
•
It is necessary to engage the shift knob of car to "Reverse"
to switch to rear view camera video display.
|
English
11
Basic Operations of Remote Controller
2
NAV
NAV
3
5
TV
TV
DVD
AUD
DVD
AUD
ENTER
18
15
ENTER
1
14
CANCEL
CANCEL
MENU
MENU
RETURN
RETURN
–
BAND+
–
BAND+
ZOOM
OUT
ZOOM
OUT
6
u
u
ATT
ATT
4
¢
38
4
¢
38
VOL
d
VOL
d
4
7
ZOOM
IN
ZOOM
IN
8
POSITION
POSITION
17
16
11
10
MODE
PBC
ROUTEM
VIEW
SC1
ZOOM
9
1 . ? &
4 GHI
2 ABC
5 JKL
8 TUV
3 DEF
AUDIO
TOP MENU MENU
MAPDIR
VOICE
SC2
OPEN
6 MNO
SUBTITLE
12
19
2-ZONE AV OUT
u
7
PQRS
9
WXYZ
13
0
#
BS
d
20
21
REAR
VOL
CLEAR
ANGLE
DIRECT
MODE
ROUTEM
SC1
TOP MENU MU
ZOOM
1
Remote Control Mode selector switch
NAV
Selects one of the following remote control modes
Zooms in or out the navigation map.
when switched to AV control mode with [NAV] switch.
TV: TV source
DVD: Built-in DVD/VCD/CD/MP3/WMA/JPEG/MPEG
player source
5
[V.SEL] key
Video source selection changes in the following order
each time you press the key.
AUD: Tuner source or attached disc changer source
2
[NAV] switch
Pressing the switch until it locks enters into the
navigation system control mode. Pressing the switch
again returns to the AV control mode.
DVD/VCD
TV */ Video
R-CAM *
3
4
[SRC] key
Audio source changes each time you press the key.
Navigation *
[VOL] key
DISC
TV
TUNER
* Optional accessory
Adjusts the volume. When you press the key, the
volume attenuates.
When you press the key again, the volume returns to
the previous level.
•
It is necessary to engage the shift knob of car to "Reverse"
to switch to rear view camera (R-CAM) video display.
|
12
English
w
[2-ZONE] key
6 [BAND] key
(When 1 is set to "DVD" or "AUD")
DISC
DISC
TV
TUNER
Select a disc and a folder.
Turns Zone function on or off each time you press the
key. (see page 92 for the <Zone Control>)
NAV
(When 1 is set to "TV" or "AUD")
TV
BAND: Switches to TV1, TV2, VIDEO1, or VIDEO2.
(When 1 is set to "AUD")
TUNER
Plays Voice guidance.
+: Switches to the FM1, FM2, or FM3 band.
–: Switches to the AM band.
NAV
e
r
[REAR VOL] key
DISC
TV
TUNER
You can adjust the rear channel volume when Zone
function is on.
Selects the icon.
7 [4]/ [¢] key
[MENU] key
(When 1 is set to "DVD" or "AUD")
DISC
(When 1 is set to "DVD")
DVD
Selects a song.
Stops to play the built-in disc play.
NAV
Displays Main menu.
(When 1 is set to "TV" or "AUD")
TV
Select a channel.
(When 1 is set to "AUD")
TUNER
Selects a station.
NAV
Selects an icon or scrolls horizontally.
t
[CANCEL] key
(When 1 is set to "DVD")
VCD
DVD
Returns to the previous screen when the DVD/VCD
Disc Menu is displayed.
NAV
Displays previous screen (same as the [Return] button
on the navigation screen).
8
[38] key
(When 1 is set to "DVD" or "AUD")
DISC
Plays or pauses.
(When 1 is set to "TV" or "AUD")
(When 1 is set to "AUD")
TV
TUNER
y
u
[ZOOM] key
Selects the Seek mode.
(see page 34/40/44 for the <Seek Mode>)
NAV
(When 1 is set to "DVD")
VCD
DVD
Each time you press the button, the zoom ratio
switches.
NAV
Displays the current position.
Jumps to the function registered in Shortcut 1.
9
[TOP MENU] key
(When 1 is set to "DVD")
DVD
[MENU] key
Calls the Top menu of DVD Disc Menu.
(When 1 is set to "DVD")
DVD
DISC
TV
TUNER
Calls the DVD Disc Menu.
Switches the Screen mode. (page 16) (When 1 is set
to "TV" or "AUD")
NAV
(When 1 is set to "DVD")
VCD
Turns the PBC (Playback Control) function On or Off.
NAV
Switches between 2D and 3D map displays.
Displays Route Option menu.
p
[AV OUT] key
i
Joystick
DVD
DISC
TV
TUNER
Selects an AV source to be output at the AV OUTPUT
port.
NAV
Switches between the heading up navigation and
north up navigation map displays.
Enters your selection from the DVD Disc Menu.
NAV
Scrolls the map, or moves the cursor.
Also performs the selected function when you press
the button down.
q
[OPEN] key
DISC
TV
TUNER
Opens or closes the monitor each time you press the
key.
NAV
Jumps to the function registered in Shortcut 2.
: An operation during DVD playback
: An operation during VCD playback
DVD
VCD
: An operation during DVD, VCD, CD, MP3/WMA/JPEG/MPEG or MD playback
: An operation during TV source
DISC
TV
: An operation during FM/AM broadcasting source
: An operation during Navigation (KNA-DV2100,KNA-DV2200,KNA-DV3200) control mode
TUNER
NAV
|
English
13
Basic Operations of Remote Controller
o
[0] – [9] key (When 1 is set to "TV" or "AUD")
[
]/[ ] key
(When 1 is set to "TV")
(When 1 is set to "AUD")
TV
TUNER
(When 1 is set to "DVD")
VCD
Slow Backward.
Slow Forward.
DVD
:
:
1 . ? &
6 MNO
—
: Recall the stations on memory.
NAV
[ANGLE] key
(When 1 is set to "DVD")
You can enter a character/number.
DVD
[SUBTITLE] key
0
: Switches the view angle.
(When 1 is set to "DVD")
: Switches a subtitle language.
DVD
6 MNO
; [DIRECT] key
Selects the Direct Search mode.
(see page 23/31/36 for <Direct Search>)
[AUDIO] key
(When 1 is set to "DVD")
VCD
: Switches an audio language.
DVD
3 DEF
a [CLEAR] key
(When 1 is set to "DVD")
Clears a numeric value you have entered in the built-in
disc player during direct search.
DVD
[1]/[¡] key
(When 1 is set to "DVD")
DVD
VCD
CD
1: Fast Backward (Rewind). The speed changes each
time it is pressed.
: Fast Forward. The speed changes each time it is
pressed.
¡
|
14
English
About discs
Handling discs
Removing discs
When removing discs from this unit pull them out horizontally.
•
Do not touch the recording surface of the disc.
Discs that cannot be used
•
Discs that are not round cannot be used.
•
•
CD-R/RW, DVD-R/RW, and DVD+R/RW are easier to damage
than a normal music CD. Use a CD-R/RW, DVD-R/RW, or
DVD+R/RW after reading the caution items on the package
etc.
Do not stick a tape, sticker, etc., on the disc.
Also, do not use a disc with those materials pasted on it.
•
•
Discs with coloring on the recording surface or that are dirty
cannot be used.
This unit can only play the CDs with one of
labels.
When using a new disc
If the disc center hole or outside rim has burrs, use it after
removing them with a ball pen etc.
Discs without the label may not be played on the unit.
A CD-R or CD-RW that hasn’t been finalized cannot be
played. (For the finalization process refer to your CD-R/CD-
RW writing software user’s guide, and your CD-R/CD-RW
recorder instruction manual.)
•
Disc storage
•
Do not leave discs in direct sunlight (On the seat or
dashboard etc.) and where the temperature is high.
Put discs in their cases.
Burrs
•
Burrs
Disc shaped accessory
Do not insert a disc shape accessory into the unit.
Disc cleaning
Wipe from the center of the disc to outward.
|
English
15
Switching Screen Mode
The Screen mode of the monitor changes each time the [MODE] key is pressed.
S
M
V
F
OPEN/CLOSE
ATT
DISP
[MODE] key
Full picture mode (FULL)
Justify picture mode (JUST)
Cinema picture mode (CINEMA)
Zoom picture mode (ZOOM)
Normal picture mode (NORMAL)
•
•
When the Menu, Easy Control screen, or Navigation is selected, it is shown in the full-size display mode automatically. Their
Screen mode cannot be changed.
The Screen mode can be set for each of DVD/VCD, TV, and video images.
|
16
English
|
English
17
Controlling during DVD Video, Video CD , JPEG or MPEG Playback
Various control screens appear when you play back a DVD Video (DVD), a Video CD (VCD) disc, a JPEG or a
MPEG files.
Displaying the DVD/VCD/JPEG/MPEG
Playback screen
1 Title Number Display
You can use the following operations when
displaying DVD/VCD/JPEG/MPEG images.
2 Chapter Number Display
3 Play Time Display
Plays back the
DVD/ VCD or
JPEG/MPEG
files.
4 Forward Chapter Search Area
V
J
I
T
Selects the next chapter.
5 Backward Chapter Search Area
DVD playback screen
Selects the previous chapter.
1
2
MODE: FU L L AV-OUT: DVD
3
DVD VIDEO
Title 1 Chap 3
T
0:02:37
6 DVD Disc Menu Control Buttons Area (page 22)
5
4
6
•
When you touched during DVD menu played it will change
to Highlight screen. (page 22).
7
7 Information Display Button Area (page 23)
VCD playback screen
8 Scene/Track Number Display
8
3
DVD VCD
Scene
2
P
2:37
PBC
VER2
9 Forward Scene/Track Search Area
Selects the next scene (when PBC is On) or track
(when PBC is Off).
MODE: FU L L AV-OUT: DVD
11
9
10
p Backward Scene/Track Search Area
Selects the previous scene (when PBC is On) or
track (when PBC is Off).
12
q Zoom Control Button Area
Displays the Zoom Control buttons (page 23).
w Information Display Button Area (page 23)
•
•
For DVD/VCD playback, DVD/VCD picture selection, or
controller key operations, see <KVT-727DVD/627DVD Basic
Operations> (page 10).
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated (page 68).
|
18
English
JPEG/MPEG playback screen
e Folder/File Number Display
13
3
MODE: FU L L AV-OUT: DVD
1
P
0:01:48 18
DVD MEDIA
r Forword File Search Area
Selects the next folder or file.
16
14
15
t Backword File Search Area
Selects the previous folder or file.
17
y Picture Control Button Area (page 23)
JPEG playback only.
u Information Display Button Area (page 23)
i Play Time Display
•
The Easy control panel functions are seeing page 24.
Displaying the Easy Control Panel
o Adjusts the volume.
The Control Panel is displayed in a floating position
of the DVD/VCD screen.
; Switches the source.
a Stops to play.
When pressed twice, the disc is played from its
beginning when you play it in the next time.
F
s Fast Forwards or Fast Backwards
Displaying the Easy Control Panel
d Chapter Search
DVD
T i t l e
1
MODE: FU L L AV-OUT: DVD
C h a p
3
T
0 : 0 5 : 3 2
19
DVD VIDEO
Searches for a chapter.
Scene/Track Search
VCD
Selects a scene (when PBC is On) or a track (when
PBC is Off).
f Plays or pauses.
20
21
22
22
23
23
24
SRC
DVD VIDEO
T i t l e
1
C h a p
3
T
0 : 0 5 : 3 219
IN
•
The Easy Control Panel is hidden when you touch a central
area of the monitor.
|
English
19
Displaying the DVD/VCD Control
screen
g Ejects the disc from the built-in disc player.
h Calls the Sound Effects Menu. (page 78/88)
j Calls the Setup Menu. (page 51)
Plays a DVD/VCD using various functions.
F
k Displays the Source Select screen. (page 49)
l Fast Forwards or Fast Backwards
DVD/VCD Control screen
/ Stops to play.
When pressed twice, the disc is played from its
beginning when you play it in the next time.
DVD VIDEO
13:50
33
31
33
30
26
27
32
31
z Selects a chapter, a scene or a track.
When the DVD/VCD is paused, touch this button to
start single-frame stepping.
29
29
28
34
IN
41
35REP
TIME37
36
Next
38
PBC
SCRL
T0:05:20
Title
KENWOOD
1
Chap
3
x Plays or pauses.
39 40
43
25
c Slow Forwards or Backwards.
DVD
T-REP
42
v Turns the PBC function of VCD On or Off. (VCD Ver
2.0)
b Switches the Repeat Play operations in the
following sequence.
DVD: Title Repeat, Chapter Repeat, Repeat Off
VCD: Track Repeat, Repeat Off (Available when the
PBC is off)
n Scrolls the display text.
m Switches the play time display in the following
sequence.
DVD: Title, chapter, remaining titles
VCD: Track, disc, remaining discs (Available when
the PBC is off)
, Title Number Display
DVD
. Chapter/Scene/Track Number Display
P Play Time Display
Q Appears when a disc is inserted.
W Function Indicator
E Volume Label Display
|
20
English
Controlling
during DVD Video, Video CD, JPEG or MPEG Playback
|
English
21
DVD Disc Menu
2 Select Disc Menu options
Disc Menu
Selects an option from the DVD Disc Menu.
1 Display the Disc Menu Control screen
Cancel
DVD Disc Menu Control Buttons
Area (page 18)
MenuCtrl
Audio
SUB 1 0 / 1 0
1 / 1
1
3
4
MenuCtrl
Top
Menu
Return
3
6
1
5
3
3
5
2
6
Zoom
1 / 1
Angle
Exit
8
4
3
2
7
Enter
Highlight
Cancel
Exit
1 Calls the Menu Control.
2 Switches the picture angle.
(during program playback only)
3 Switches the caption language.
(during program playback only)
1 Calls the Menu.
2 Returns to the Disc Menu Control screen.
3 Selects a menu option.
4 Enters your menu selection.
5 Returns to the previous menu screen.
6 Displays the Top Menu.
4 Switches the voice language.
(during program playback only)
5 Displays the Zoom Control screen.
7 Highlight Control.
6 Clears the Disc Menu Control.
8 Clears the Disc Menu Control.
Zoom Control
Highlight Control
You can select a chapter and title for the DVD
Menu screen. When you touch a chapter and
title, it is played back.
Zoom
ZoomCtrl
2
Highlight
2
2
Off : MODE Key
DVD Menu
DVD Menu
1. KENWOOD
1. KENWOOD
1
2
3
4
Zoom
x 2
Cancel
Exit
2. KENWOOD
2. KENWOOD
3. KENWOOD
3. KENWOOD
4. KENWOOD
4. KENWOOD
1 Changes the zoom ratio at 4 levels (2 times, 3
times, 4 times, or off) each time you touch.
5. KENWOOD
5. KENWOOD
6. KENWOOD
6. KENWOOD
2 Scrolls the screen in the direction you touch.
3 Returns to the Disc Menu Control screen.
4 Clears the Disc Menu Control.
•
To cancel Highlight Control, press "MODE" key. (page
11)
|
22
English
Controlling
during DVD Video, Video CD, JPEG or MPEG Playback
VCD Zoom Control
Information Display
Displays an enlarged VCD screen.
Displays the DVD and AV information.
Information Display
Button Area
1 Display the Zoom Control screen
(page 18,19)
Zoom Control Button Area
(page 18)
The information is displayed for 5 seconds.
ZoomCtrl
2
Direct Search
You can search for a DVD/VCD chapter, scene or
2
2
track by entering its number.
1 Select the Direct Search mode
1
2
3
Zoom
x 2
Exit
#
BS
DIRECT
1 Changes the zoom ratio at 4 levels (2 times, 3
times, 4 times, or off) each time you touch.
2 Scrolls the screen in the direction you touch.
3 Clears the Zoom Control button.
The following items can be searched directly each
time it is pressed.
DVD: Title, Chapter, Time, Direct number
VCD (when PBC is On): Scene, Direct number
VCD (when PBC is Off): Track, Time
However, the direct search may not be supported
for some discs.
Picture Control
Rotates picture for JPEG files.
1 Display the Picture Control screen
2 Enter a number or time
Picture Control Button Area
(page 19)
0
—
9
WXYZ
PictureCtrl
When playing back a VCD, enter a PBC screen
number (if PBC is On) or a track number (if PBC is
Off).
1
3
4
•
To clear your incorrect entry, press
(CLEAR).
CLEAR
2
5
Exit
3 Search
1 Switch the picture flip horizontal.
2 Switch the picture flip vertical.
3 Rotate the picture counter clockwise.
4 Rotate the picture clockwise.
38
POSITION
5 Clears the Picture Control button.
•
The operation ends automatically if you do not operate
within 10 seconds.
|
English
23
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control
You can call various control screens during CD/MP3/WMA/JPEG/MPEG/Disc Changer playback.
Displaying the Easy Control Panel
1 Adjusts the volume.
The CD/MP3/WMA/JPEG/MPEG/Disc Changer Play
Control Panel is displayed in a floating position of
the selected picture.
2 Switches the source.
3 Stops to play the built-in disc player.
4 Fast Forwards or Fast Backwards. (only when a CD is
played back on the built-in disc player)
F
5 Selects a song or data.
When you continue to touch button:
Fast Forwards or Fast Backeards.
(Disabled when a JPEG is being played.)
Displaying the Easy Control Panel
During CD playback
6 Plays or pauses.
1
DVD CD
MODE: FU L L AV-OUT: DVD
7 Selects a folder. (only when an MP3/WMA/JPEG/
MPEG is played back onthe built-in disc player)
8 Selects a disc. (only when a disc is played back on
the disc changer)
2
3
4
4
5
5
6
SRC
DVD CD
Tr a c k
3
P
0 5 : 3 2
1
•
•
For CD/MP3/WMA/JPEG/MPEG/Disc Changer playback and
receiver key operations, see <KVT-727DVD/627DVD Basic
Operations> (page 10).
IN
During MP3/WMA/JPEG/MPEG playback
The Easy Control Panel is hidden when you touch a central
area of the monitor.
3
7
7
5
5
6
+
SRC
–
3
1
P
0 : 0 5 : 3 2
DVD MEDIA
During playback on disc changer
8
D
D 1
8
D
T 3
5
5
6
6
SRC
CD CH
-
+
P
5 : 3 2
During playback on CD player
5
5
SRC
CD
T
3
P
5 : 3 2
|
24
English
Displaying the CD/MP3/WMA/ JPEG/
MPEG/Disc Changer Control screen
During CD playback
You can play the CD/MP3/WMA/disc changer using
various functions.
9 Adjusts the volume.
p Calls the CD Menu.
q Calls the Sound Effects Menu. (page 78/88)
w Displays the Source Select screen. (page 49)
e Calls the Setup Menu. (page 51)
r Ejects the disc from the built-in disc player.
t Selects a track.
F
CD Control screen
9
9
DVD CD
13:5
10
27
Menu
11
13
y Fast Forwards or Fast Backwards.
u Plays or pauses.
15
17
15
16
16
12
IN
26
i Starts or stops Scan Play (that plays the beginning
18
20
21
DISP
P
22
REP19
of each song one after the other).
SCN
24 Track
RDM
SCRL TIME23
4
KENWOOD
2:09 25
o Repeats to play (the present track).
9
9
14
; Starts or stops Random Play (to play songs in
REP
28
random order).
a Selects the Disc Name (see <Set Disc Name>, page
29), Disc Text, or Track Text mode for text display.
s Scrolls the display text.
d Switches the play time display between Track, Disc,
and Disc Remaining Time.
f Track Number Display
g Play Time Display
h Appears when a disc is inserted.
j Stops to play the built-in disc player.
When pressed twice, the disc is played from its
beginning when you play it in the next time.
k Function Indicator
|
English
25
MP3/WMA/JPEG/MPEG Control screen
During MP3/WMA/JPEG/MPEG play
l Calls the MP3/WMA/JPEG/MPEG Menu.
/ Ejects a disc.
DVD MEDIA
Menu
13:50
32
35
35
+
29
33
34
33
31
31
z Fast Forwards or Fast Backwards.
45
IN
(Disabled when a JPEG is being played.)
41
36
38
39
DISP SCRL
40
SCN REP37 RDM
Next
x Stops to play.
3
1
P
0:00:38
30
43
44
KENWOOD
When pressed twice, the disc is played from its
beginning when you play it in the next time.
REP 46
c Selects a song or data.
v Plays or pauses.
FREP
42
b Selects a folder.
n Starts or stops Scan Play (that plays the beginning
of each song or data one after the other).
m Repeats to play (the present song).
, Starts or stops Random Play (to play songs of the
present folder in random order).
. Selects the Folder name, File name, Title (ID3/WMA
tag), Artist name (ID3/WMA tag), or Album name
(ID3 tag) for text display.
P Scrolls the display text.
Q Switches the button display.
W Repeats to play the song or data of the present
folder.
E Folder and File Number Display
R Play Time Display
T Appears when a disc is inserted.
Y Function Indicator
|
26
English
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control
Disc changer/CD player Control screen
During play by the disc changer/CD player
CD CH
13:50
48
49
47
48
+
Menu
U Calls the Disc Changer/ CD player Menu.
Disc
50
I Selects a track.
49
Starts Fast Forward or Fast Backwards when it is
held down.
-
Disc
57
52
SCN REP RDM
51
53
59
TIME
58
DISP SCRL
56
Next
O Selects a disc. (Function of Disc Changer)
60
61
62
3:25
D
3
T
7
P
: Plays or pauses.
63
REP
A Starts or stops Scan Play (that plays the beginning
54
55
DREP MRDM
of each song one after the other).
S Repeats to play (the present track).
D Starts or stops Random Play (to play songs in
random order).
F Repeats to play disc (the present disc). (Function of
Disc Changer)
G Starts or stops Magazine Random Play (to play
songs of the disc changer in random order).
(Function of Disc Changer)
H Switches the button display.
J Selects the Disc Name (see <Set Disc Name>, page
29), Disc Text, or Track Text mode for text display.
K Scrolls the display text.
L Switches the play time display between Track, Disc,
and Disc Remaining Time.
Disc Number Display (Function of Disc Changer)
Track Number Display
Play Time Display
Function Indicator
•
The functions that can be used and the information that
can be displayed will differ depending on the models being
connected.
|
English
27
Displaying the CD/MP3/WMA/JPEG/
MPEG/Disc Changer Menu screen
Selects options from various function menus.
You can select menu options using various
functions.
Returns to the CD/MP3/WMA/JPEG/MPEG/Disc
Changer Control screen.
Menu
•
The available functions vary depending on the source used.
CD Menu screen
DV D C D
Name Set
64
65
|
28
English
CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control
Set Disc Name
Directory List (during MP3/WMA/JPEG/
MPEG play)
Names a CD.
The directory of an MP3/WMA/JPEG/MPEG disc are
listed for quick search.
1 Play a CD you wish to name
2 Call the CD/Disc Changer Menu
1 Call the MP3/WMA/JPEG/MPEG Menu
Menu
3 Select the Set Name mode
Name Set
Menu
2 Start the Directory List
Directory List
Upper Fo l d e r Name
Fo l d e r Name
Fo l d e r Name
F i l e Name
DVD MEDIA
3
4
5
•
The
position varies
Name Set
7
depending on the disc you are playing.
7
2
4 Enter a name
1
Root
Fol
F i l e Name
6
For character entry details, see <Character Entry>
(page 48).
Open
0 : 35 : 27
F i l e Name
5 Exit the Set Name mode
1 Returns to the root directory.
2 Displays the next higher level of hierarchy.
3 Displays a directory if the subdirectory has
O k
a directory. When you touch the directory, it
opens.
4 Displays a directory if the subdirectory has
files without a directory. When you touch the
directory, it opens and songs in the directory
are played.
5 Displays the MP3/WMA/JPEG/MPEG files. When
you touch a file, its song is played back.
•
•
You cannot name an MD or MP3/WMA/JPEG/MPEG
disc.
Number of discs that can be stored in memory
Built-in disc player: 10
External CD changer/ player:
Varies depending on the CD changer/ player. Refer to
the CD changer/ player manual.
6 Plays the selected directory.
7 Scrolls the list.
3 Select a song
F i l e Name
Display the desired song and touch the file display.
|
English
29
ID3/WMA TAG Display (during MP3/
WMA play)
Disc Select (during play by disc
changer)
The ID3/WMA TAG information of MP3/WMA file is
listed.
The discs loaded on the disc changer are listed for
quick disc selection.
1 Call the MP3/WMA/JPEG/MPEG Menu
1 Call the Disc Changer Menu
Menu
Menu
2 Display the ID3/WMA TAG
2 Call the Disc Select Menu
Information
Disc Select
1
C D C H
1. Disc Name
2. Disc Name
DVD MEDIA
ALBUM:
Title:
2
DISP
3. Disc Name
4. Disc Name
5. Disc Name
6. Disc Name
Artist:
3
1
Album:
3
1
P
2 : 3 5
1 Scrolls the list.
1 Plays the displayed disc.
2 Selects the Disc Name or Disc Text mode for
text display.
3 Scrolls the list.
(It is not displayed when a disc changer having
6 or less discs is used.)
3 Select the desired disc
1. Disc Name
Touch the desired disc display.
|
30
English
CD/WMA/MP3/JPEG/MPEG/Disc Changer Play Control
Direct Search
Searches for a disc or a track when its number is
entered.
During play on the built-in disc player
1 Select the Direct Search mode
#
BS
DIRECT
The following items can be searched directly each
time it is pressed.
CD: Track number, Total play time
MP3/WMA/JPEG/MPEG: Folder, File
2 Enter a track number
0
9
WXYZ
—
3 Search
When searching for a track:
38
POSITION
During play on an external in disc player or disc
changer
1 Enter a disc or track number
0
9
WXYZ
—
2 Search
When searching for a track:
4
¢
When searching for a disc:
–
BAND+
•
The operation ends automatically if you do not operate
within 10 seconds.
|
English
31
Tuner Control
Various control screens appear in the Tuner Source mode.
Displaying the Easy Control Panel
1 Adjusts the volume.
The Tuner Control Panel is displayed in a floating
position of the selected picture.
2 Switches the source.
3 Switches the band (to AM or FM1/2/3).
4 Tunes in a station
F
5 Switches the Seek mode.
(see page 34 for the <Seek Mode>)
Displaying the Easy Control Panel
1
•
For receiver key operations, see <KVT-727DVD/627DVD
Basic Operations> (page 10).
MODE:FULL AV-OUT:DVD
•
The Easy Control Panel is hidden when you touch a central
area of the monitor.
1
3
3
5
2
4
4
SEEK
9 8 . 1 M H z
SRC
TUNER
A M F M
P r e s e t
F M 1
1
Displaying the Tuner Control screen
6 Adjusts the volume.
You can tune in a station using various functions.
7 Calls the Tuner Menu.
8 Calls the Sound Effects Menu. (page 78/88)
9 Displays the Source Select screen. (page 49)
p Calls the Setup Menu. (page 51)
q Switches to the FM1/2/3 band.
w Switches to the AM band.
F
Tuner Control screen
6
6
T U N E R
13:50
7
11
12
FM
AM
e Tunes in a station.
8
Use the <Seek Mode> (page 34) to change the
frequency switching.
13
16
13
10
9
6
1
r Switches between
Function buttons to use.
to
buttons and
15
LO.S
17
18
19
20
14
Next
SCRL MONO
AME SEEK DISP
Preset
FM
1
1
98 . 1 MHz
23
t Turns the Local Seek function On or Off
6
6
AUTO1
y Selects the Auto Memory mode.
22
21
(see page 34 for the <Auto Memory>)
1
2
3
4
5
6
u Switches the Seek mode.
(see page 34 for the <Seek Mode>)
i Selects the Program Service Name, or Radio Text
mode for text display.
o Scrolls the display text.
; Select the Monaural reception mode. (Only when
receiving the FM broadcast)
|
32
English
6
1
a When
to
buttons appear, you can recall
the stations on memory.
For memory of broadcasting stations, see <Auto
Memory> (page 34) or <Manual Memory> (page
34).
s Indicates current Seek mode.
d Memory Number Display
Displaying the Tuner Menu screen
f Selects option from various function menus.
You can select menu options using various
functions.
g Returns to the Tuner Control screen.
Menu
•
The available functions vary depending on the model used
(the tuner specifications and the broadcasting system that
can be received).
Tuner Menu screen
24
T U N E R
25
|
English
33
Seek Mode
Manual Memory
Sets a station selection.
Stores the current receiving station in memory.
1 Select a station you wish to store in memory
SEEK
FM
AM
Next
SEEK
If
is not shown, touch
.
The mode is switched in following order each time
you touch the button.
2 Store in memory
2sec.
2sec.
6
1
Tunes in a station with good
reception automatically.
—
AUTO1
Tunes in stations in memory one
6
1
Next
AUTO2
If
to
are not shown, touch
.
after another.
Continue to touch until the memory number
appears.
Switches to the next channel
manually.
MANU
Auto Memory
Stores stations with good reception in memory
automatically.
1 Select a band you wish to store in memory
FM
2 Select the Auto Memory mode
AME
AM
Next
AME
If
is not shown, touch
.
3 Start Auto Memory
Touch
or
.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
•
The operation ends automatically if you do not operate
within 10 seconds.
|
34
English
Tuner Control
Preset Select
Lists and tunes in stations in memory one after the
other.
1 Call the Tuner Menu
Menu
2 Call the Preset Select Menu
Preset Select
1
T U N E R
FM1 1) 87.5 MHz
4
FM1 2) 90.1 MHz
FM1 3) 98.1 MHz
FM1 4) 106.1 MHz
FM1 5) 108.0 MHz
FM1 6) 87.5 MHz
2
2
3
F M 9 8 . 1
1 Tunes in the displayed station.
The station name is displayed if previously set.
2 Switches the band of the displayed station list.
3 Shows the band and frequency.
4 Returns to the Tuner Menu.
|
English
35
Direct Search
Traffic Information
Tunes in a station when its frequency is entered.
1 Select a band
When a traffic bulletin starts, any source is switched
to the traffic information and it is displayed
automatically.
–
BAND+
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
2 Selects the Direct Search mode
Traffic Information screen
#
BS
1
1
DIRECT
T U N E R
13:50
2
3
3 Enter a frequency
—
9
WXYZ
0
Traffic Information
1
1
When you enter frequency, signal reception starts.
Example: When you receive FM 92.1 MHz
1 Adjusts the volume.
0
9
WXYZ
2 ABC
1 . ? &
2 Calls the Sound Effects Menu. (page 78/88)
3 Calls the Setup Menu. (page 51)
Example: When you receive AM 810 kHz
0
8
TUV
1 . ? &
0
If you continue to listen to the audio source
during traffic bulletin...
•
The operation ends automatically if you do not operate
within 10 seconds.
•
•
It is necessary to have Traffic Information function set
to On in order to have the Traffic Information screen
appear automatically.
During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it's automatically
the remembered volume.
|
36
English
Tuner Control
Search for Program Type
Radio Text
A program is tuned when you set its program type.
You can display the radio text.
(Only when receiving the FM broadcast.)
(Only when receiving the FM broadcast.)
1 Call the Tuner Menu
1 Call the Tuner Menu
Menu
Menu
2 Display the Radio Text
2 Call the PTY Search Menu
Radio Text
PTY Search
T U N E R
1
2
T U N E R
All Speech
All Music
Radio Text
4
1
2
2
News
Current Affairs
Information
3
SRCH
F M 9 8 . 1
F M 9 8 . 1
Not Found
1 Displays the Radio Text.
2 Returns to the Tuner Menu.
1 Selects a program type.
2 Scrolls the program type list.
3 Searches for the program type.
It is displayed when the Program Type is
selected.
4 Returns to the Tuner Menu.
3 Select a program type
News
etc.
4 Search for the program type
SRCH
|
English
37
TV/ VIDEO Control
Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional
accessory TV Tuner connected.)
Displaying the TV Picture screen
1 TV Band Number Display
Various control screens appear in the TV Source
mode.
2 TV Area Group Display (page 73)
3 Memory Number Display
Select the TV
Pictures.
4 Channel Number Display
F
5 Channel Up Area
Increase the channel.
TV Picture screen
6 Channel Down Area
G r o u p 1
T V 1
2
MODE:FULL AV-OUT:DVD
P r e s e t
1
3
2 c h
4
1
Decrease the channel.
7 Band/Video Switch Area
6
5
7
Switches to TV1, TV2, or VIDEO.
8 Information Display Button Area
8
•
•
For TV picture selection and receiver key operations, see
<KVT-727DVD/627DVD Basic Operations> (page 10).
TV
TV1
G r o u p 1
P r e s e t
1
2 c h
The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated (page 68).
Displaying the Easy Control Panel
9 Adjusts the volume.
The Control Panel is displayed in a floating position
of the TV picture.
p Switches the source.
q Switches to Video (VIDEO).
w Switches the TV band (to TV1 or TV2).
F
e Select a channel.
Use the <Seek Mode> (page 40) to change the
channel tuning sequence.
Displaying the Easy Control Panel
r Switches the Seek mode.
T V 1
P r e s e t
MODE:FULL AV-OUT:DVD
1
2 c h
9
(see page 40 for the <Seek Mode>)
•
The Easy Control Panel display is hidden when you touch a
central area of the monitor.
10
11
12
T V
13
13
14
SEEK
2 c h
SRC
TV
VID
TV1 G r o u p 1
9
P r e s e t
1
|
38
English
Displaying the TV Control screen
t Adjusts the volume.
You can tune in a TV station using various
functions.
y Calls the TV Menu.
u Calls the Sound Effects Menu. (page 78/88)
i Displays the Source Select screen. (page 49)
o Calls the Setup Menu. (page 51)
; Switches to VIDEO.
F
TV Control screen
a Switches to TV1 or TV2.
15
15
s Select a channel.
T V
17
13:50
22
16
20
VIDEO
TV
Use the <Seek Mode> (page 40) to change the
channel tuning sequence.
22
24
19
21
18
6
1
d Switches between
Function buttons to use.
f Selects the Auto Memory mode.
to
buttons and
25
23
–
–
–
–
2ch
Next
AME SEEK
TV1 Group1 Preset
28
1
29
(see page 40 for the <Auto Memory>)
AUTO1
15
15
27
g Switches the Seek mode.
26
1
2
3
4
5
6
(see page 40 for the <Seek Mode>)
6
1
h When
to
buttons appear, you can
recall channels on memory.
For memory of broadcasting stations, see <Auto
Memory> (page 40) or <Manual Memory> (page
40).
j Indicates current Seek mode.
k TV Area Group Display (page 73)
l Memory Number Display
Displaying the TV Menu screen
/ Selects option from various function menus.
You can select menu options using various
functions.
z Returns to the TV Control screen.
Menu
TV Menu screen
T V
30
31
|
English
39
Seek Mode
Manual Memory
Sets a station selection.
Stores the current receiving channel in memory.
1 Select a channel you wish to store in memory
SEEK
TV
Next
SEEK
If
is not shown, touch
.
The mode is switched in following order each time
you touch the button.
2 Store in memory
2sec.
2sec.
6
1
Tunes in a station with good
reception automatically.
—
AUTO1
Tunes in stations in memory one
6
1
Next
AUTO2
If
to
are not shown, touch
.
after another.
Continue to touch until the memory number
appears.
Switches to the next channel
manually.
MANU
Preset Select
Lists and tunes in stations in memory one after the
other.
Auto Memory
Stores stations with good reception in memory
automatically.
1 Select a band you wish to call
1 Select a band you wish to store in memory
TV
TV
2 Select the Auto Memory mode
AME
2 Call the TV Menu
Menu
(Page 39 y)
3 Call the Preset Select Menu
Next
AME
If
is not shown, touch
.
Preset Select
3 Start Auto Memory
1
T V
TV1 1) 1ch
2
TV1 2) 2ch
TV1 3) 3ch
TV1 4) 4ch
TV1 5) 5ch
TV1 6) 6ch
Touch
or
.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
T V
3 c h
1 Tunes in the displayed station.
The station name is displayed if previously set.
2 Returns to the TV Menu.
•
The operation ends automatically if you do not operate
within 10 seconds.
|
40
English
TV/ VIDEO Control
Set Station Name
Names a station.
1 Select a station you wish to name
TV
2 Call the TV Menu
Menu
(Page 39 y)
3 Select the Set Name mode
Name Set
4 Enter a name
For character entry details, see <Character Entry>
(see page 48).
5 Exit the Set Name mode
O k
•
•
You can store up to 20 stations in memory.
You can set a station name only after you have applied
the parking brake.
|
English
41
DAB Tuner control
Various control screens appear in the DAB Tuner source mode. (with the optional accessory DAB tuner
connected only)
Displaying the Easy Control Panel
1 Adjusts the volume.
The DAB Tuner Control Panel is displayed in a
floating position of the selected picture.
2 Switches the source.
3 Switches the band (to DAB1/2/3).
4 Selects a service.
F
5 Selects the Ensemble.
6 Switches the Seek mode.
Displaying the Easy Control Panel
(see page 44 for the <Seek Mode>)
1
MODE:FULL AV-OUT:DVD
•
•
For system key operations, see <KVT-727DVD/627DVD Basic
Operations> (page 10).
The Easy Control Panel display is hidden when you touch a
central area of the monitor.
2
3
4
4
S
5
5
6
SEEK
SRC
Band
D A B 1
S
–
+
DAB
1
2 2 0 . 0 9 4 M H z
Displaying the DAB Tuner Control
screen
7 Adjusts the volume.
You can select the Ensemble and services using
various functions.
8 Calls the DAB Tuner Menu.
9 Calls the Sound Effects Menu. (page 78/88)
p Displays the Source Select screen. (page 49)
q Calls the Setup Menu. (page 51)
w Switches the band (to DAB1/2/3).
e Selects a service.
F
DAB Tuner Control screen
7
7
DA B
13:50
8
r Selects the Ensemble.
13
13
Service +
9
6
1
t Switches between
Function button to use.
y Selects the Auto memory mode.
to
buttons and
14
12
14
11
10
Band
Service –
15
21
16
17
18
–
Service Label
–
Next
P/S
DAB
AME SEEK DISP
(see page 44 for the <Auto Ensemble memory>)
1
Preset
2
u Switches the Seek mode.
(see page 44 for the <Seek Mode>)
AUTO1
20
7
7
19
i Changes the display between Ensemble label, PTY
label, Component label, Region label, and Audio
quality.
1
2
3
4
5
6
6
1
o When
to
buttons appear, you can
recall a service on memory.
; Indicates current Seek mode.
a Selects the primary or secondary operation.
|
42
English
Displaying the DAB Tuner Menu
screen
s Selects option from various function menus.
You can select menu options using various
functions.
d Returns to the DAB Tuner Control screen.
Menu
•
For DAB Tuner function details, see the Instruction Manual of
DAB Tuner (optional accessory).
DAB Tuner Menu screen
DA B
23
22
|
English
43
Seek Mode
Service Preset Memory
Sets a station selection.
The current receiving service is stored in memory.
1 Select a service you wish to store in memory
SEEK
Band
Service +
Service –
Next
SEEK
If
is not shown, touch
.
The mode is switched in following order each time
you touch the button.
2 Store in memory
2sec.
2sec.
6
1
Tunes in a ensemble with good
reception automatically.
—
AUTO1
Tunes in service in memory one
6
1
Next
AUTO2
If
to
are not shown, touch
.
after another.
Continue to touch until the memory number
appears.
Switches to the next channel
manually.
MANU
Auto Ensemble Memory
An ensemble with good reception is stored in
memory automatically.
1 Select a band you wish to store in memory
Band
2 Select the Auto Memory mode
AME
Next
AME
If
is not shown, touch
.
3 Start Auto Memory
Touch
or
.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
|
44
English
DAB Tuner control
Service Select
Language Filter
The service list of the currently receiving ensemble
is displayed for your selection.
The languages are list for your selection.
1 Call the DAB Tuner Menu
1 Call the DAB Tuner Menu
Menu
Menu
2 Call the Language Filter Menu
Language Filter
2 Call the Service Select Menu
Service Select
DA B
3
DA B
Service Name
Service Name
Language
3
1
1
English
1
Service Name
Service Name
Service Name
Service Name
2
2
2
SRCH
2 2 0 . 0 9 4 M H z
2 2 0 . 0 9 4 M H z
1 Selects a language.
1 Selects a service.
2 Scrolls the service list.
2 Searches for the selected language.
3 Returns to the DAB Tuner Menu.
3 Returns to the DAB Tuner Menu.
3 Select a language you wish to use
3 Select a service
Service Name
4 Search for the language
SRCH
|
English
45
Search for Program Type
3 Select a program type
The services are received when you set its program
type.
1 Call the DAB Tuner Menu
Menu
Select a Language
Display the Language select screen
LANG
2 Call the PTY Search Menu
PTY Search
DA B
PTY
News
Language
DA B
1
1
4
English
PTY
1
1
News
2
SRCH
3
Re t u r n
2 2 0 . 0 9 4 M H z
3
2
SRCH
LANG
1 Selects a Language.
2 2 0 . 0 9 4 M H z
2 Searches for the program type.
3 Returns to the PTY Search Menu.
1 Selects a program type.
2 Searches for the program type.
3 Displays the Language select screen.
4 Returns to the DAB Tuner Menu.
Select a Language
4 Search for the program type
SRCH
|
46
English
DAB Tuner control
DAB Information
DAB Announcement
The DAB information is displayed.
1 Call the DAB Tuner Menu
When the Announcement you have turned on
starts, any source is switched to the Announcement
automatically.
When the announcement starts...
The Announcement screen appears automatically.
Announcement screen
Menu
2 Display the DAB Information screen
DAB Information
1
1
DA B
13:50
2
3
T U N E R
1
Service Label:
3
Ensemble Label:
2
2
Traffic News
1
1
Component Lable:
1 Adjusts the volume.
2 2 0 . 0 9 4 M H z
2 Calls the Sound Effects Menu. (page 78/88)
3 Calls the Setup Menu. (page 51)
1 Displays the DAB information (such as Service
label, Ensemble label, Component label, Audio
quality, Region label, and Dynamic label).
2 Scrolls the information display.
3 Returns to the DAB Tuner Menu.
|
English
47
Character Entry
How To Use the Character Entry
screen
1 Shifts the cursor.
When you select the Set Disc Name mode or
others, the following screen appears for character
entry.
2 Enters a space.
If you erase a character, locate the cursor on it and
touch this button.
Character Entry screen
3 Enters characters.
1
1
4 Scrolls up or down the character button display.
KENWOOD
3
5 Exits the Character Entry mode and returns to the
a
h
o
v
b
c
d
k
r
e
l
f
g
previous screen.
i
j
m
t
n
u
4
p
w
2
q
x
s
z
•
You can enter characters only after you have applied the
parking brake.
4
y
5
S p a c e
O k
|
48
English
Source Select
The source you wish to listen to can be selected quickly.
Displaying the Control screen
•
The Source Select screen can be displayed from the control
screen of any source
F
Press this key several times unit the Control screen
appears.
Control screen
DVD VIDEO
13:50
IN
REP
Chap
KENWOOD
TIME
SCRL
T0:05:20
Next
PBC
Title
1
3
T-REP
Displaying the Source Select screen
1 Adjusts the volume.
2 Select the source.
3 Returns to the Control screen previously displayed.
Source Select screen
1
1
STANDBY
2
TUNER
DVD
3
VIDEO
CD CH
AUX EXT
1
1
|
English
49
Adjusting the Monitor Display Position and Quality
You can adjust the position and picture quality of the monitor.
Displaying the Screen Control screen
1 Brightness Control
You can adjust the picture quality using the
Disabled if the Auto Dimmer is On.
following keys.
2 Tint Control
Displayed for an NTSC system image on TV or
Video.
S
3 Color Control
Displayed on the TV/Video screen only.
Screen Control screen
4 Contrast Control
Au t o D I
M
5 Black Level Adjustment
1
2
3
1
2
3
7
7
6 Displays the Adjust Monitor Position screen.
(see <Displaying the Angle Control screen>, page
50)
6
4
5
4
5
7 Auto Dimmer Setup
When turned "On", the display is dimmed
automatically when the ambient becomes dark.
8
8 Returns to the previous screen.
•
•
The Screen Control screen is displayed only when you have
applied the parking brake.
The picture quality can be set for each source.
Displaying the Angle Control screen
9 Monitor Angle Adjustment
You can set the monitor position and open/close
speed.
p Forward/Backward Monitor Position Adjustment
q Monitor Open/Close Setup
When turned "On", the monitor is opened or closed
automatically when you turn on or off the ignition
key.
Angle Control screen
w Monitor Action Setup
When set to "Quick", the monitor is opened quickly.
9
9
e Returns to the Screen Control screen.
r Returns to the previous screen.
10
10
13
Screen
11
12
AUTO OP-CL
MONI ACT
Of f
Normal
14
OK
|
50
English
Setup Menu
Setup Menu
You can set up various receiver parameters.
Displaying the Control screen
•
You can call the same Setup Menu for the Control screen of
each source.
F
Press this key several times until the Control screen
appears.
Control screen
DVD VIDEO
13:50
IN
REP
Chap
KENWOOD
TIME
SCRL
T0:05:20
Next
PBC
Title
1
3
T-REP
Displaying the Setup Menu screen
1 Adjusts the volume.
2 Scrolls the Setup Menu.
3 Calls each Setup Menu.
4 Calls the Sound Effects Menu. (page 78/88)
Setup Menu screen
5 Returns to the Control screen of the previous
1
1
source.
3
4
•
•
Your setup on the Sound Effects menu is adjusted
automatically according to your <Audio Set Up> (page
52/58) on the Setup menu. We recommend you to
complete the <Audio Set Up> first, then set up the <Sound
Effects menu>.
5
2
2
The available functions vary depending on the model used
(the tuner specifications and the broadcasting system that
can be received).
1
1
|
English
51
Audio Set UP (Function of KVT-727DVD)
Audio Set Up (Other than STANDBY mode)
You can set up the car type and speaker system you use together with this unit.
Displaying the Car Type Set Up screen
1 Adjusts the volume.
If your car type is selected, the Digital Time
2 Returns to the Control screen of the previous
Alignment and Equalizer is set automatically (for
timing adjustment of sound output for each
channel) to have the highest surround effects.
source.
3 Calls the Sound Effects Menu. (page 78)
4 Calls the Setup Menu.
5 Sets up the car type you use together with this unit.
You can choose according to type of your car.
Compact, Sedan, Wagon1, Wagon2, Minivan1,
Minivan2, SUV, Passenger Van, Off
Car Type Set Up screen
1
1
6 Displays the DTA (Digital Time Alignment) Setup
screen. (page 56)
4
DTA
3
2
6
You can adjust the digital time alignment that was
set automatically when you selected the car type.
Car Type
5
Compact
Car Type
5
7 Displays the Speaker Set Up screen.
7
•
If
is not shown, touch
or
1
1
to display it.
Displaying the Speaker Set Up screen
8 Selects a speaker to be set.
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
(see <Speaker Set Up>, page 54)
9 Selects a speaker type.
(see <Speaker Set Up>, page 54)
p Displays the Speaker Crossover Setup screen.
(see <Crossover Network Setup>, page 57)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
Speaker Set Up screen
q Sets the use or no use of tweeter.
8
Use
11 TW
(see <Speaker Set Up>, page 54)
w Displays the Channel Level Setup screen.
X'Over HPF
10 X'Over LPF
Front
10
e Displays the Car Type Set Up screen.
9
10cm
9
•
Your setup on the <Sound Effects Menu> is adjusted
automatically to get the best sound effects according to the
car type and speaker you have set on the <Audio Set Up>
(page 52). We recommend you to complete the <Audio Set
Up> first, then set up the <Sound Effects Menu>.
Speaker
12
13
You can fine-adjust the automatic set value by <DTA Setup>
(page 56) or <Parametric Equalizer> (page 81).
|
52
English
Displaying the Channel Level screen
r Selects a speaker to be set.
You can set the volume at each setup position.
(see <Channel Level>, page 55)
t Sets the speaker volume.
(see <Channel Level>, page 55)
y Starts or stops test signal tone output for setup
check.
u Displays the Speaker Set Up screen.
14
Te s t
16
Front Left
15
+ 5dB
15
Channel Level
17
|
English
53
Speaker Set Up
2 Select a speaker type
You can select a speaker type and its size to get the
best sound effects.
1 Select a speaker you wish to adjust
You can select any of the following speaker types.
Center speaker:
(Page 52 8)
NONE, 40mm x 70mm, 5cm, 10cm, 13cm,
16 cm over
Speaker Set Up screen
1
Use
TW
5
Front speakers:
OEM, 10cm, 13cm, 16cm, 17cm, 18cm,
4x6 inches, 5x7 inches, 6x8 inches, 6x9 inches,
7x10 inches
X'Over HPF
2
2
3
3
X'Over LPF
Front
Rear speakers:
4
10cm
NONE, OEM, 10cm, 13cm, 16cm, 17cm, 18cm,
4x6inches, 5x7inches, 6x8 inches,
6x9 inches, 7x10 inches
Speaker
Subwoofer:
NONE, 16cm, 20cm, 25cm, 30cm, 38cm over
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
5 Tweeter setup
You can set the tweeter when you are selecting
front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "Use". In the
"Use" position, the Equalizer is adjusted to its
best position.
•
•
Select "NONE" if you have no speakers.
If you set the center speaker to "NONE" even in a short
time when you are setting the Surround Control (page
82) to "Bypass+Center", the Surround Control is set to
"Bypass" automatically.
•
•
If you set the center and rear speakers to "NONE"
when you are setting the Surround Control (page 82)
to "Dolby PL II", the Surround Control is set to "Bypass"
automatically.
If you set the rear speakers to "NONE" when you are
setting the Surround Control (page 82) to "CS II", the
Surround Control is set to "Bypass" automatically.
|
54
English
Audio Set Up (Function of KVT-727DVD)
Channel Level
You can set the volume at each setup position.
1 Select a speaker you wish to adjust
(Page 53 r)
Channel Level setup screen
1
Te s t
2
3
5
4
Front Left
+ 5dB
6
Channel Level
1 Center speaker
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
2 Adjust the volume
|
English
55
DTA Setup
3 Set a delay time
Manually sets the sound output timing of each
channel.
1 Display the DTA Setup screen
The speakers are virtually moved to the desired
distance.
DTA
(Page 52 6)
When the values of center speaker and front
speakers increase, they are virtually moved
forward. When the values of rear speakers and
subwoofer increase, they are virtually moved
backward.
DTA Setup screen
1
DTA
Front
2
2
10cm
3
Re t u r n
1 Selects a speaker to be adjusted.
2 Sets a delay time of the selected speaker.
3 Returns to the Car Type Set Up screen.
2 Select a speaker you wish to adjust
1
2
2
3
3
4
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
|
56
English
Audio Set Up (Function of KVT-727DVD)
Crossover Network Setup
You can manually set a crossover frequency of
speakers.
Sets a High pass Filter friquency.
(Page 52 p)
X'Over HPF
X'Over(HPF)
HPF Front
FREQ
80Hz
HPF Rear
FREQ
30Hz
1
2
1
2
1
Slope
18db
Slope
2
18db
Re t u r n
3
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
Sets a Low pass Filter friquency.
(Page 52 p)
X'Over LPF
X'Over(LPF)
FREQ
Slope
1
2
1
2
80Hz
18db
4
Normal
Re t u r n
SUB Phase
3
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
•
•
When you select a speaker type on the Speaker Setup
screen, the crossover frequency setup is cleared.
During crossover setup, the speaker type is set to "User"
on the Speaker Set Up screen.
|
English
57
Audio Set UP (Function of KVT-627DVD)
Audio Set Up
You can setup a speaker network, etc.
Displaying the Audio Set Up screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 88)
4 Calls the Setup Menu.
Speaker setup screen
1
5 Displays the X'Over setup screen. (page 59)
1
4
6 Sets up the front speaker type to fine-tune for the
optimal equalizer curves.
3
7
Standard: Setup for general diameter speakers
Narrow: Setup for small diameter speakers
Middle: Setup for middle diameter speakers
2
5
Wide:
Setup for large diameter speakers
6
6
7 Set the use or no use of Subwoofer.
1
1
|
58
English
Crossover Network Setup
You can set a crossover frequency of speakers.
(Page 58 5)
X'Over setup screen
X'Over
HPF Front FREQ
1
2
3
220Hz
HPF Rear FREQ
180Hz
LPF SUB FREQ
120Hz
4
SUB Phase
Normal
5
Re t u r n
1 Sets a Front High Pass Filter frequency.
You can select any of the following frequency.
Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz
2 Sets a Rear High Pass Filter frequency.
You can select any of the following frequency.
Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz
3 Sets a Subwoofer Low Pass Filter frequency.
You can select any of the following frequency.
50, 60, 80, 100, 120, Through Hz
4 Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set to
"Reverse".
5 Returns to the Speaker setup screen.
•
•
Set in both the front channel and rear channel
simultaneously when using high pass filter function. You
cannot set a correct crossover network if the high pass filter
function is only used for one channel.
The SUB Phase button is not displayed when the Sub-
woofer Low Pass Filter is set to "Through".
|
English
59
DVD Setup
You can set up the DVD play.
Displaying the DVD SETUP 1 screen
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (page 78/88)
3 Calls the Setup Menu.
4 Selects a disc menu language.*1
DVD SETUP 1 screen
(See <Language Setup>, page 62)
5 Selects a subtitle language.*1
3
Menu LANG
2
en
Sub t i t l e LANG
en
Aud i o LANG
en
Set
Set
Set
4
5
(See <Language Setup>, page 62)
6 Selects an audio language.*1
1
(See <Language Setup>, page 62)
6
7
Dynam i c R ange Con t r o l
Normal
7 Sets the dynamic range.( Wide)
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal" to
"Midnight". You can easy to listen a small sound
when the dynamic range is narrow.
7
DVD SETUP 1
8
This is effective only when you are using a Dolby
Digital software.
8 Displays the DVD SETUP 2 screen.
•
•
If
is not shown, touch
or
to display it.
*1 Disabled when a DVD is being played.
|
60
English
Setup Menu
Displaying the DVD SETUP 2 screen
9 Sets an angle mark display. ( On)
p Selects the screen display mode.*1 ( 16:9)
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter Box
format (having black stripes at the top and
bottom of screen).
DVD SETUP 2 screen
"4:3 PS": Displays wide pictures in the Pan & Scan
format (showing pictures cut at the right
and left ends).
Angle Mark
9
Screen Ratio
9
On
Off
Set
13
10
10
16:9
Parental Level
Off
q Displays the Parental Lock screen.*1 ( Off)
11
(See <Parental Level Setup>, page 63)
w Displays the DVD SETUP 1 screen.
12
DVD SETUP 2
e Displays the DVD SETUP 3 screen.
•
*1 Disabled when a DVD is being played.
Displaying the DVD SETUP 3 screen
r Selects the picture display time.*1 ( Middle)
The Display of a JPEG picture is changed.
"Short", "Middle", "Long"
t Selects the Picture Effect.*1 ( Random)
y Displays the DVD SETUP 2 screen.
DVD SETUP 3 screen
*1 Disabled when a DVD is being played.
Picture Display Time
Middle
•
14
Picture Transition
Random
15
16
DVD SETUP 3
|
English
61
Language Setup
Abbreviation
aa
ab
af
Language
Abbreviation
lv
Language
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
Selects a language you use for the speech and
menus.
am
ar
as
1 Display the Language Setup screen
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
See <Displaying the DVD SETUP 1 screen> (page
60) and select a language you wish to use.
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Audio LANG
en
1
a
h
o
b
i
c
j
d
k
r
e
l
f
g
n
u
m
t
p
q
s
v
w
x
y
z
ORIGN
4
3
2
5
C l e a r
C a n c e l
E n t e r
ps
pt
qu
rm
rn
1 Enters a language code.
2 Cancels the language setup and returns to the
DVD SETUP 1 screen.
3 Clears the language code.
4 Sets the original audio language.
(It appears during audio language setup.)
5 Sets the language and returns to the DVD
SETUP 1 screen.
(It appears after you have entered a language
code.)
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
ro
ru
rw
sa
sd
sg
sh
si
eu
fa
fi
fj
fo
Fiji
Faroese
French
Frisian
fr
fy
sk
sl
ga
gd
gl
gn
gu
ha
he
hi
Irish
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
2 Enter a language code
See the Language Code Table shown at right to
select the desired language.
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Hebrew
Hindi
hr
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
3 Set the language you use
hu
hy
ia
ie
ik
te
tg
th
E n t e r
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
id
is
it
ja
Indonesian
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
lb
ln
lo
lt
Lithuanian
|
62
English
Setup Menu
3 Display the Parental Level Setup screen
Parental Level Setup
Sets a parental level.
E n t e r
1
Display the Parental Level code number screen
Parental Level
Set
(Page 61 q)
Level 5
Parental Pass
* * * *
1
1
1
1
2
3
5
8
0
4
7
6
Level 5
2
4
R e t u r n
9
1 Sets a parental level.
3
2
5
C l e a r
C a n c e l
E n t e r
2 Returns to the DVD SETUP 2 screen.
4 Set a parental level
1 Enters a code number.
2 Cancels the current setup and returns to the
DVD SETUP 2 screen.
3 Clears the code number.
4 Indicates the present parental lock level.
5 Determines the code number and displays the
5 Complete the parental level setup
Parental Level Setup screen.
R e t u r n
2 Enter the code number
0
9
—
•
•
•
If a disc has a higher parental lock level, the audience
needs to enter the code number.
The parental lock level varies depending on a loaded
disc.
•
•
The number you enter first is set as your code number.
If a disc has no parental lock, any audience can play it
back even when you have set the parental lock.
You can clear the code number by pressing the Reset
button.
|
English
63
System Setup
You can set up the system parameters.
Displaying the System Set Up 1
screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
System Set Up 1 screen
5 Turns the key touch tone On or Off. ( On)
1
1
4
6 Allows scrolling of text display on the Source
Beep
3
5
5
6
7
O
n
O
O
f f
f f
Control screen. ( Manual)
Scroll
A u t o
Remote Sensor
"Auto":
Scrolls the screen automatically.
2
"Manual": Allows you to scroll the screen manually.
7
O
n
7 Selects a remote control signal. ( On)
When turned "Off", the remote control of TV
reception is rejected.
System Set Up 1
8
1
1
8 Displays the System Set Up 2 screen.
•
If
is not shown, touch
or
to display it.
|
64
English
Setup Menu
Displaying the System Set Up 2
screen
9 Sets a music CD playback. ( 1)
"1": Automatically recognizes and plays back an
MP3/WMA disc, a DVD or a music CD.
"2": Forcibly plays back a disc as a music CD. Select
"2" if you wish to play a music CD having a
special format or if you cannot play a disc in
the "1" position.
System Set Up 2 screen
CD Read
1
9
Key ILLUMI
G r e e n
10
•
•
You cannot play an MP3/WMA/VCD disc in the "2" position.
Also, you may not play some music CDs in the "2" position.
Your setup is disabled when the disc is being played.
p Selects an illumination color of receiver keys.
Red)
"Green": Green
"Red": Red
q Displays the System Set Up 1 screen.
11
System Set Up 2
(
|
English
65
AV Interface
You can set audio and visual (AV) interface parameters. <KVT-627DVD : AV INPUT1 only>
Displaying the AV I/F 1 screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
AV I/F 1 screen
5 Selects a navigation system connection. ( RGB)
"RGB": Allows the Kenwood’s Navigation System
to connect via its interface cable.
1
4
3
1
5
6
5
6
"AV-IN1": Allows a third-party navigation system to
connect via the AV INPUT1 port.
2
On
7
8
"Off":
Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
8
9
1
1
6 Sets a name to be displayed when you select a
system that is connected via the AV INPUT1 port.
(
VIDEO1)
•
If you have set the navigation system connection to "AV IN1",
the display is fixed to "NAV".
7 Sets an image display of the system that is
connected via the AV INPUT2 port. *1 ( Off)
"Off": When the image source is switched, an
image entered via the AV INPUT2 port is
displayed.
"On": When an image signal is entered via the AV
INPUT2 port, this image is displayed.
8 Sets a name to be displayed when you select an
image of the system that is connected via the AV
INPUT2 port. ( VIDEO2)
9 Displays the AV I/F 2 screen.
•
If
is not shown, touch
or
to display it.
• *1 This function can be use AV INPUT1. (KVT-627DVD)
|
66
English
Setup Menu
Displaying the AV I/F 2 screen
p Sets a method to switch to the rear view camera
video display. ( Off)
"On": Switches to the rear view camera video
display when engaging the shift knob of car
to "Reverse".
"Off":Switches to the the rear view camera video
display when engaging the shift knob of car
to "Reverse" and then pressing the [V.SEL]
switch several times.
AV I/F 2 screen
O n
10
11
12
q You can flip the left and right of the rear view
camera video display. Set to "Reverse" and the the
rear view will be displayed left and right in mirror
image on the screen. ( Normal)
DV D
12
14
13
w Selects an AV source to be output at the AV
OUTPUT port. ( AV-IN1)
e Displays the AV I/F 1 screen.
r Displays the AV I/F 3 screen.
Displaying the AV I/F 3 screen
t Selects speakers used for voice guidance of the
navigation system. ( F-Left)
"F-Left": Uses the front left side speaker for voice
guidance.
"F-Right": Uses the front right side speaker for
voice guidance.
AV I/F 3 screen
"Front-All":Uses both front speakers for voice
guidance.
15
16
17
18
F-Left
y Adjusts the volume for voice guidance of the
16
navigation system. ( 19)
u Mutes the volume during voice guidance of the
navigation system. ( On)
When turned "On", the volume level drops for voice
guidance.
19
i Sets a selecting method of audio source from the
Navigation system. ( Off)
"On": Allows you to select the audio source input
from the Navigation system interface by
pressing [SRC] or selecting it on Source Select
screen.
"Off":The audio source cannot be selected using
[SRC] or on Source Select screen.
o Displays the AV I/F 2 screen.
|
English
67
User Interface
You can set up user interface (IF) parameters.
Displaying the User I/F 1 screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
User I/F 1 screen
1
5 Switches the wall paper.
1
4
6 Displays the User I/F 2 screen.
3
5
5
2
•
If
is not shown, touch
or
to display it.
6
1
1
Displaying the User I/F 2 screen
7 Sets an on-screen display of the navigation screen.
Auto)
(
"Auto": Information is displayed for 5 seconds when
updated.
"MANU": Information is displayed when you touch
on the screen.
User I/F 2 screen
8 Sets an on-screen display of the video playback
screen. ( Auto)
7
8
9
"Auto": Information is displayed for 5 seconds when
updated.
"MANU": Information is displayed when you touch
on the screen.
10
T V
9 Sets an on-screen display of the DVD playback
screen. ( MANU)
11
"Auto": Information is displayed for 5 seconds when
updated.
"MANU": Information is displayed when you touch
on the screen.
p Sets an on-screen display of the TV screen.
(
Auto) (with the optional accessory TV tuner
connected only)
"Auto": Information is displayed for 5 seconds when
updated.
"MANU": Information is displayed when you touch
on the screen.
q Displays the User I/F 1 screen.
|
68
English
Setup Menu
Touch Panel Adjustment
Clock
You can adjust the touch panel operations.
1 Display the Touch Panel Adjust screen
You can adjust the clock time.
1 Display the Clock screen
Touch
Clock
Touch
Clock
If
is not shown,
to display it.
If
is not shown,
to display it.
touch
or
touch
or
1
1
1
1
4
4
6
6
7
7
Menu
Touch Adjust
3
2
5
3
2
5
S e t
11:25
8
9
9
O
n
O
f f
RDS SYNC
To u c h
C l o c k
1
1
1
1
1 Adjusts the volume.
1 Adjusts the volume.
2 Returns to the Control screen of the previous
2 Returns to the Control screen of the previous
source.
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
5 Allows you to start touch panel adjustment.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
5 Clock time display.
6 Adjusts hours.
7 Adjusts minutes.
2 Start to adjust the touch panel
8 Sets "00" minute.
Setup examples: 3:00~3:29 ➔ 3:00
3:30~3:59 ➔ 4:00
S e t
9 Sets the clock time in synchronization with the
time data sent from the RDS station. ( On)
When turned "On", the synchronized mode
starts and the clock cannot be adjusted
manually.
Touch Adjust
1
2
2 Adjust the clock time
1 Cancels the adjustment and returns to the
Touch Panel Adjust screen.
2 Resets to the initial status.
3 Adjust the positions
Touch the center of left lower and right upper
when requested.
|
English
69
Security Code Setup
2 Start the security code registration
You can set a security code to protect your receiver
system against theft.
S e t
Pass Word
1st
•
When the Security Code function is activated it cannot be
released.
Note, your Security Code is the 4 digit number entered in
your "Car Audio Passport" in this package.
1
1
4
7
2
5
8
0
3
6
9
1 Display the Security Code Setup screen
3
2
4
C l e a r
C a n c e l
E n t e r
Security
1 Enters the numbers to your security code.
2 Clears your entry.
3 Cancels the registration and returns to the
Security Code Setup screen.
4 Registers your security code.
Security
If
is not shown,
to display it.
touch
or
1
1
4
5
S e c u r i t y C o d e
S e t
f f
3
2
3 Enter a security code
6
6
O
n
O
D S I
—
9
0
S e c u r i t y
Input a four-digit number.
1
1
4 Register your security code
E n t e r
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
5 Allows you to start security code registration.
5 Reenter the security code
Reenter the same security code as that you have
entered in Step 3 for confirmation.
6 Turns the DSI function on or off.
If turned "On", the burglar alarm lamp flashes
when the protection panel is removed. ( On)
•
If you enter a different security code, the screen returns
to Step 3 (for the first code entry).
•
If you have already completed the code registration,
S e t
is not available.
6 Register the security code again
E n t e r
Now, your security code is registered.
If you press the Reset button or if you disconnect
your receiver from the battery after the code
registration, you need to enter the registered
security code.
See below for details.
|
70
English
Setup Menu
If you have pressed the Reset button or if you have
disconnected the Receiver from battery...
1 Enter the correct security code
—
9
0
You must enter the same security code as that you
have entered in Step 3 above.
2 Enter the security code
E n t e r
Now, you can use your Receiver.
•
If you enter an incorrect security code, you cannot use
your Receiver for a while.
Incorrect entry count
Receiver inoperable time
1
–
2
5 minutes
1 hour
24 hours
3
4 or more
|
English
71
1 Recalls the memorized settings.
2 Memorizes the current Audio Set Up and AV
Set Up Memory
Audio Set Up and AV Interface settings can be
memorized. The memorized settings can be recalled
at any time. For example, even when the settings
are cleared due to replacement of the battery, the
settings can be restored.
Interface settings.
3 Clears the currently memorized settings.
4 Returns to Set Up Memory screen.
3 Memorize or recall the settings.
When memorizing the Audio Set Up and AV
Interface settings:
1 Display the Set Up Memory screen
Set Up Memory
If settings have already been memorized, a
confirmation message appears. Touch
To cancel memorization, touch
.
Set Up Memory
If
is not shown,
to display it.
.
touch
or
When recalling the memorized settings:
1
1
4
3
5
6
5
Would You Like to
Memorize or Recall the
Audio & AV setup?
2
Touching the screen displays a confirmation
message. Touch
.
6
To cancel recalling, touch
.
1
1
When clearing the currently memorized
settings:
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
Touching the screen displays a confirmation
message. Touch
To cancel clearing, touch
.
5 Locks the Audio Set Up and AV Interface settings.
When
is selected, you cannot set the
.
Audio Set Up and AV Interface settings.
6 Memorizes or recalls the settings. To cancel the
4 Quit memorization/recalling of settings.
function, touch
.
To cancel memorization, touch
.
The Setup Menu screen appears again.
2 Display the Memory screen
•
When the settings have already been memorized, it will be
cleared if you set up memory function without connecting
a monitor and a receiver unit.
4
Please Select the
Desired Function from
the Choices Below.
2
3
1
|
72
English
Setup Menu
TV Setup
The TV signal receiving areas can be set. (with the optional accessory TV Tuner connected only)
Displaying the TV1 Area Set screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
TV Set Up
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
TV1 Area Set screen
1
5 Sets the present TV1 receiving area.
6 Displays the TV2 Area Set screen.
1
4
Menu
3
2
Austria
Belgium
Germany
Norway
Sweden
Denmark
Iceland
Portugal
Finland
Netherlands
Spain
TV Set Up
•
If
is not shown, touch
or
to display it.
Switzerland Yougoslavia
5
1
2
3
4
5
6
6
T V 1 A r e a S e t
1
1
Displaying the TV2 Area Set screen
7 Sets the present TV2 receiving area.
8 Displays the TV1 Area Set screen.
TV2 Area Set screen
Menu
Austria
Belgium
Germany
Norway
Sweden
Denmark
Iceland
Portugal
Finland
Netherlands
Spain
Switzerland Yougoslavia
7
1
2
3
4
5
6
8
T V 2 A r e a S e t
|
English
73
RDS Setup
The related RDS parameters can be set.
Displaying the RDS Set Up 1 screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
RDS Set Up
3 Calls the Sound Effects Menu. (page 78/88)
4 Calls the Setup Menu.
RDS Set Up 1 screen
5 Sets a news bulletin interrupt time.
6 Turns the Alternative Frequency function On or Off.
1
1
4
Menu
News
5
A F
3
2
5
6
7
O f f
O
(
On)
7 Turns the Region Restriction function On or Off.
On)
n
n
O
O
f f
f f
6
Regional
(
7
O
O
Auto TP Seek
8
8 Turns the Auto TP Seek function On or Off. ( On)
8
n
O
f f
9 Displays the RDS Set Up 2 screen.
RDS Set Up 1
9
1
1
RDS Set Up
•
If
is not shown, touch
or
to display it.
Displaying the RDS Set Up 2 screen
p Selects a display language for the PTY function.
q Displays the RDS Set Up 1 screen.
RDS Set Up 2 screen
Menu
Language Select
10
10
G e r m a n
11
RDS Set Up 2
|
74
English
Setup Menu
AMP Control
Sets the power amp connected via the LX bus. (with the optional accessory LX Power Amp connected only)
Displaying the AMP Control screen
1 Adjusts the volume.
2 Calls the Setup Menu.
AMP Ctrl
3 Calls the Sound Effects Menu. (page 78/88)
4 Returns to the Control screen of the previous
source.
AMP Control screen
5 Setup option and value display
6 Selects a setup option.
7 Selects a set value.
1
1
2
Menu
6
6
3
4
7
7
8 Enters the set value.
S e t
8
5
A M P
1
VO LT 1 4 . 4 V
AMP Ctrl
•
•
•
If
is not shown, touch
A M P C o n t r o l
or
to display it.
1
1
For the model name of amp you can control from the
system, see the amp’s catalog.
For the options and values you can change and for the
amp’s operation when changed, see the amp’s instruction
manual.
|
English
75
DAB Set Up
You can set the DAB reception. (only with the optional accessory DAB Tuner connected)
Displaying the DAB Set Up screen
1 Adjusts the volume.
2 Calls the Sound Effects Menu. (page 78/88)
DAB Set Up
3 Returns to the Control screen of the previous
source.
4 Calls the Setup Menu.
DAB Set Up screen
5 Turns the DAB Priority On or Off.
1
1
5
DA B P r i o r i t y
D R C
O f f
O f f
O f f
4
6 Turns the Dynamic Range Control function On or
Menu
2
3
Off.
6
7
7 Turns the Regional Announcement function On or
R e g i o n a l I N T
Off.
P T Y Wa t c h
P T Y Wa t c h O f f
8
8
8 Sets a program type to be selected automatically
A n n o u n c e m e n t S e l e c t
DA B S e t U p
S e t
9
when the receiving ensemble starts.
9 Displays the Announcement Selection screen.
1
1
(page 77)
DAB Set Up
•
If
is not shown, touch
or
to display it.
|
76
English
Setup Menu
Announcement Selection
3 Terminate the setup
You can set various announcement reception
parameters.
1 Displays the Announcement Selection screen
S e t
(Page 76 9)
1
1
Announcement
2
Traffic News
O f f
O f f
O f f
O f f
4
Transport News
Warning
3
3
News
Re t u r n
1
1
1 Adjusts the volume.
2 Turns the Announcement Reception function
On or Off.
3 Scrolls the Announcement items.
4 Returns to the DAB Set Up screen.
2 Set the announcement parameters
etc.
Traffic News
Traffic News:
Traffic information
Transport News: Time table information of public
transportation services
Warning:
Lower priority items than alarms
(power failure, cutoff of water
supply and others)
News:
News flash
Weather:
Events:
Weather forecasting
Event information
Special Events: Undetermined event information
Radio Info:
Program information, advance
notice
Sports News:
Sports news
Financial News: Financial news
|
English
77
Sound Effects Menu (Function of KVT-727DVD)
Sound Effects Menu
You can set up the receiver sound effects.
Displaying the Control screen
•
You can display the same Sound Effects Menu on the
Control screen of any source.
F
Control screen
DVD VIDEO
13:50
TIME
IN
REP
Chap
Next
PBC
Title
KENWOOD
SCRL
1
3
T0:05:20
T-REP
Displaying the Sound Effects Menu
screen
1 Adjusts the volume.
2 Calls the Sound Effects Menu.
3 Calls the Setup Menu. (page 51)
4 Returns to the Control screen of the previous
source.
Sound Effects screen
1
1
2
•
Your setup on the <Sound Effects Menu> is adjusted
automatically according to your <Audio Set Up> (page
52) on the Setup menu. We recommend you to complete
the <Audio Set Up> first, then set up the <Sound Effects
Menu>.
3
4
Surround Control
SRS WOW
1
1
|
78
English
Audio Control
You can adjust the front and rear and right and left audio balance.
Displaying the Audio Control 1
screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Audio Control 1 screen
1
5 Adjusts the right and left volume balance.
6 Adjusts the front and rear volume balance.
1
6
6
4
7 Adjusts the volume of the present source based on
5
5
3
the difference level of original volume.
2
7
7
- 1
•
If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if you
suddenly switch to another source may be extremely loud.
8
1
1
8 Displays the Audio Control 2 screen.
Displaying the Audio Control 2
screen
9 Adjusts the bass boost of the B.M.S power amplifier
(optional accessory).
•
You may not set some models of power amp boost to "+18".
See the catalog or instruction manual of power amplifier.
Audio Control 2 screen
p Sets the center frequency of bass boost you have
set for "AMP Bass". (optional accessory)
Menu
BMS AMP Bass
If you set the center frequency to "Low", it will be
dropped approximately 20% to 30%.
9
9
+
BMS AMP FREQ
6 d B
10
Normal
Low 10
q Displays the Audio Control 1 screen.
Audio Control 2
11
|
English
79
Equalizer
You can set up the equalizer.
Displaying the Equalizer screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
Equalizer
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Equalizer screen
5 Displays the Parametric Equalizer screen.
1
1
(page 81)
4
5
P-EQ
You can adjust the value set for the Equalizer Curve
Type.
3
KBS
6
6
2
Pops
6 Selects an equalizer curve type.
You can select any of the following equalizer
curves.
Equalizer
• "Natural"
• "Rock"
• "Pops"
• "Easy"
1
1
• "Top40"
• "Jazz"
•
Equalizer curve can be set for each source.
|
80
English
Sound Effects Menu (Fuction of KVT-727DVD)
Parametric Equalizer
5 Set a gain
You can manually set the equalizer curve by
adjusting the center frequency, gain and Q value.
1 Display the Parametric Equalizer screen
6 Set a Q value
P-EQ
1
1
Parametric Equalizer
2
9
Flat
3
4
5
Band1
Band2
Band3
Band4
7 Close the Parametric Equalizer screen
FREQ
6
7
6
Hz
80
dB
9
Hz
315
dB
-7
kHz
1.60
dB
9
kHz
16.00
dB
Gain
Q
7
8
R e t u r n
-7
8
1.00
0.25
F
0.50
R
0.50
11
Re t u r n
C
10
1
1
1 Adjusts the volume.
2345 Select a band to be adjusted.
6 Sets a frequency.
7 Sets a gain level.
8 Sets a Q value.
9 Tone curve becomes flat.
0 Select a channel to be adjusted.
- Exits the Parametric Equalizer setup and returns
to the Equalizer screen.
2 Select a channel you wish to adjust
F
R
C
3 Select a frequency band you wish to adjust
—
You can adjust the following frequency bands.
Band1: 60, 80, 100, 120, 160, 200 Hz
Band2: 250, 315, 400, 500, 630, 800, 1k Hz
Band3: 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k Hz
Band4: 5k, 6.3k, 8k, 10k, 12.5k, 16k Hz
4 Set a center frequency
|
English
81
Surround Control
You can set up the sound field.
Displaying the Surround Control screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
Surround Control
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Surround Control screen
5 Sets a sound field.
You can select any of the following sound fields.
• "Bypass"
1
1
4
7
Adjust
3
2
Surround
• "Bypass+Center"
• "Dolby PLII Movie"
• "Dolby PLII Music"
• "Dolby PLII Matrix"
• "SRS CS II Music"
• "SRS CS II MONO"
5
5
Stream infomation
Dolby Digital 48kHz 2/0
6
Sorround Control
1
1
6 Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM, MPEG or
MP3/WMA), input channels (front or rear channels),
and sampling frequency are displayed.
7 Displays the Surround Control Adjustment screen.
(See <Surround Control Adjustment>, page 83)
•
•
When you have selected the TV or TUNER source and when
you set the Dolby PL, we recommend you to select the
"Dolby PLII Matrix" mode. If you select another Dolby PLII
mode, the sound is NOT output from rear speakers when
you receive monaural broadcasting sounds.
Surround Control can be set for each source.
|
82
English
Sound Effects Menu (Fuction of KVT-727DVD)
Surround Control Adjustment
You can adjust the sound field.
2 Adjust the sound field
1 Display the Surround Control screen
3 Exit the Surround Control adjustment
Adjust
R e t u r n
Surround Control Adjust screen
If the sound field of "Dolby
PLII Music" has been set:
1
1
Dimention Control
Neutral
Center Width Control
5
2
3
2
3
4
Panorama Mode
On
1
1
5
Re t u r n
1
2
Adjusts the volume.
Sets the surround position by adjusting the
front and rear volume balance.
3
Sets the vocal image position by adjusting the
right and left vocal volume level.
4
5
Turns the Panorama mode On or Off.
Enters your setup and returns to the Surround
Control Control screen.
If the sound field of "SRS CS II " has been set:
MIX to Rear(Front)
1
MIX to Rear(Center)
6
7
6
7
3
Re t u r n
6
7
Sets the surround position by adjusting the
front and rear volume balance.
Adjusts the center audio mix to rear volume.
•
•
You cannot use the <Surround Control Adjustment>
during playback of Multi channel source.
You cannot use the <Surround Control Adjustment>
when the sound field of "Dolby PLII Movie", or "Dolby
PLII Matrix" has been set.
|
English
83
SRS WOW Control
You can set up the SRS WOW effect.
Displaying the SRS WOW Control screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
SRS WOW
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu. (page 78)
SRS WOW Control screen
1
5 Sets a SRS WOW.
1
You can select any of the following sound fields.
• "Off"
• "Low"
• "Middle"
• "High"
• "User"
4
6
Adjust
3
2
SRS WOW
5
5
Middle
SRS WOW
6 Displays the SRS WOW User Setup screen. (page 85)
1
1
•
It is not effective though SRS WOW can be set besides
"Off" when you set <Surround Control> to "Dolby PLII".
Set <Surround Control> to "Bypass" or "SRS CS II" if you
expect SRS WOW sound effect.
Table of Sound Effect Menu
You can set to sound effect menu to mark " ○ ".
Input
Channels
Multi
Surround
Function
-
SRS 3D
FOCUS
Rear
○
TruBass
Rear
○
Front
Rear
Front
○
Center
Front
○
Center
○
○
○
-
○
-
-
Bypass
○ *
○ *
-
○
○
○
○
-
-
-
-
Bypass+Center
Dolby PLII
○
○
○
-
○
2ch
-
-
-
-
-
SRS CS II
○ *
○ *
○
○
○
○
○
○
•
* The SRS 3D effect cannot be set when you selected tuner source.
|
84
English
Sound Effects Menu (Fuction of KVT-727DVD)
SRS WOW User Setup
1 Display the SRS WOW Adjust screen
Adjust
SRS WOW Adjust screen
1
1
SRS WOW Adjust
2
TurBass
FOUCS
SRS 3D
Front
Rear
3
3
4
5
3
5
1
4
Center
5
Re t u r n
6
1
1
1
2
Adjusts the volume.
Selects a speaker to be set (Front or Rear or
Center speaker).
3
4
5
6
Sets the TruBass effect level.
Sets the FOCUS effect level.
Sets the SRS 3D effect level.
Returns to SRS WOW Control screen.
•
FOCUS: Adjusts the vertical position of the speaker and
sound image by virtual adjustment.
•
•
•
TruBass: Assists the playback for the super bass sound.
SRS 3D: Makes a natural 3D sound field.
You cannot set SRS 3D in tuner source.
2 Select a speaker you wish to adjust
Front
Rear
Center
3 Adjust the sound effect level
4 Exit the Surround Control adjustment
R e t u r n
|
English
85
Position
You can adjust the sound effects according to your listening position.
Displaying the Position screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
Position
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Position screen
1
5 Sets a listening position.
1
4
You can select any of "Front R" (Right front), "Front
L" (Left front), "Front All" (All front), and "All" (All)
positions.
Adjust
6
3
2
Position
Front L
6 Displays the Position Adjust screen.
5
5
(page 87)
P1
P2
P3
7
7 Stores the present adjustment setup in memory, or
Position
calls it from memory. (page 87)
1
1
•
The final distance is adjusted to the total of Car Type Set
Up value (page 52) and Position Setup (both Position and
Position Fine Control) value.
•
•
If you change the Car Type Set Up value (page 52), the
position is set to "All".
Only the adjusted distance of position setup (Position and
Position Fine Control values) is stored in memory. Therefore,
the final adjustment distance changes if you change the Car
Type Set Up value (page 52).
|
86
English
Sound Effects Menu (Fuction of KVT-727DVD)
1 Center speaker
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
Position Adjust
You can fine-adjust your listening position.
1 Display the Position Adjust screen
Adjust
3 Set a delay time
Position Fine Control screen
1
1
2
Position Adjust
Total Front Left
3
100cm
Front Left
4 Close the Position Adjust Screen
4
4
100cm
3
5
Re t u r n
R e t u r n
1
1
Stores the Preset adjustment setup
1 Adjusts the volume.
To store your adjustment in memory:
2 Selects a speaker to be adjusted.
3 Indicates setup distance.
2sec.
2sec.
The adjusted distance (Position and Position
Adjust values), and the total of the distance
adjusted by Car Type Set Up (page 52) and
the adjustment distance for position setup are
indicated.
—
P1
P3
Continue to touch
seconds.
to
more than 2
P1
P3
4 Adjust the distance to each speaker.
5 Exits the Position Adjust setup and returns to
the Position screen.
Calls the Preset adjustment setup
To call your adjustment from memory:
2 Select a speaker you wish to adjust
—
P1
P3
Touch
to
of your adjustment you
P1
P3
1
wish to call from memory.
2
3
5
4
6
|
English
87
Sound Effects Menu (Function of KVT-627DVD)
Sound Effects Menu
You can set up the receiver sound effects.
Displaying the Control screen
•
You can display the same Sound Effects Menu on the
Control screen of any source.
F
Control screen
DVD VIDEO
13:50
TIME
IN
REP
Chap
Next
PBC
Title
KENWOOD
SCRL
1
3
T0:05:20
T-REP
Displaying the Sound Effects Menu
screen
1 Adjusts the volume.
2 Calls the Sound Effects Menu.
3 Calls the Setup Menu. (page 51)
4 Returns to the Control screen of the previous
Sound Effects screen
source.
1
1
2
•
Your setup on the <Sound Effects Menu> is adjusted
automatically according to your <Audio Set Up> (page
58) on the Setup menu. We recommend you to complete
the <Audio Set Up> first, then set up the <Sound Effects
Menu>.
3
4
1
1
|
88
English
Audio Control
You can adjust the front and rear and right and left audio balance.
Displaying the Audio Control 1
screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Audio Control 1 screen
1
5 Adjusts the right and left volume balance.
6 Adjusts the front and rear volume balance.
1
6
6
4
7 Adjusts the volume of the present source based on
5
5
3
the difference level of original volume.
2
8
8
7
9
7
- 1
•
If you have increased the volume first, then reduced the
volume using the "Vol. Offset", the sound generated if you
suddenly switch to another source may be extremely loud.
10
1
1
8 Adjusts the subwoofer volume.
9 Turns the Loudness control function On or Off.
If turned "On", high and low tones are automatically
enhanced during low volume. ( On)
p Displays the Audio Control 2 screen.
Displaying the Audio Control 2
screen
q Adjusts the bass boost of the B.M.S power amplifier
(optional accessory).
•
You may not set some models of power amp boost to "+18".
See the catalog or instruction manual of power amplifier.
Audio Control 2 screen
w Sets the center frequency of bass boost you have
set for "AMP Bass". (optional accessory)
Menu
BMS AMP Bass
If you set the center frequency to "Low", it will be
dropped approximately 20% to 30%.
11
11
+
BMS AMP FREQ
6 d B
12
Normal
Low 12
e Displays the Audio Control 1 screen.
Audio Control 2
13
|
English
89
Equalizer
You can set up the equalizer.
Displaying the Equalizer screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
Equalizer
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Equalizer screen
5 Selects an equalizer curve type.
1
1
You can select any of the following equalizer
curves.
4
7
Menu
To n e
3
2
• "Natural"
• "Rock"
• "Pops"
• "Easy"
• "Top40"
• "Jazz"
5
System Q-EX
Equalizer
5
6
On
1
1
6 Selects items to be adjusted for tone curve setup.
If turned "Off", only Level can be setup for tone
curves.
7 Displays the Tone curve setup screen. (page 91)
•
Equalizer curve can be set for each source.
|
90
English
Sound Effects Menu (Fuction of KVT-627DVD)
Tone curve setup
4 Set a level
Level
You can set a Tone curve.
1 Display the Tone setup screen
5 Set a Q factor
To n e
(Page 90 7)
Q Factor
Tone setup screen
1
1
You can set it up only when Bass or Middle is
adjusted.
2
3
6 Close the Tone setup screen
4
6
5
7
1
1
1 Adjusts the volume.
2 Bass adjustment items are displayed.
3 Middle adjustment items are displayed.
4 Treble adjustment items are displayed.
5 Bass DC Extend settings
If turned "On", it extends the bass center
frequency to the low register by approximately
20%.
6 Tone curve becomes flat.
7 Returns to the Equalizer screen.
•
Tone curve can be set for each source.
2 Select a frequency band you wish to adjust
You can adjust the following frequency bands.
Bass:
40, 50, 60, 70, 80, 100, 120, 150 Hz
Middle: 500, 1k, 1.5k, 2k Hz
Treble: 10k, 12.5k, 15k, 17.5k Hz
3 Set a center frequency
FREQ
|
English
91
Zone Control
Zone Control
You can set the front and rear audio source.
Displaying the Zone Control screen
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 51)
4 Calls the Sound Effects Menu.
Zone Control screen
1
5 Turns the Zone Function (that sets different source
1
4
5
sounds for front and rear speakers) On or Off.
When turned On,
and
are shown.
7
3
2
6 Sets the front and rear audio source separately.
(This button appears when the Zone function is
On.)
8
6
6
1
1
•
When the rear speaker sound is switched, the audio source
that is output at the AV OUTPUT terminal is also switched to
the same source.
However, if you have set the "Area" to "Reverse", the audio
source that is output at the AV OUTPUT terminal is switched
depending on the front sound source.
7 Switches the front and rear audio sources.
(This button appears when the Zone function is
On.)
Use "Reverse" to change over the front and rear
audio sources.
8 Adjusts the volume of the rear channel.
(This button appears when the Zone function is
On.)
•
There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer or center.
- <Audio Setup> (page 52/58), <Equalizer> (page 80/90),
<Surround Control>(page82), <SRS WOW>(page 84),
<Position>(page86) are not available.
|
92
English
Muting Audio Volume upon Reception of Phone call
Muting Audio Volume upon Reception
of Phone call
When the telephone is called, the system is paused
automatically.
When the telephone is called...
The Phone Call ("CALL") screen appears, and
systemis paused.
Phone Call ("CALL") screen
C A L L
13:50
If you want to continue to listen to the audio
source during phone call...
The system resumes audio play during the phone
call.
When the call ends...
Hang up the phone.
The system resumes playing automatically.
|
English
93
Glossary
DVD: Digital Versatile Disc
Title number (DVD)
A type of disc which contains recording of audio/
video packaged media with high video and audio
quality, such as a movie, featuring large recording
capacity and digital signal processing capability.
The title is the largest unit of video and audio
recorded in a DVD. It usually corresponds to a
single movie of video software or an album (some-
times a piece of music) of music software. The
numbers assigned to individual titles are referred
to as the title numbers.
VCD: VIDEO CD
A type of CD which contains the recording of mov-
ing images. It compresses image information by
about 1/120 and audio information by about 1/6
and accommodates up to 74 minutes of recording
in a disc with the same diameter as ordinary music
CD of 12 cm.
Chapter number (DVD)
The chapter is a section of video and audio record-
ed in a DVD. A title is composed of several chap-
ters. The numbers assigned to individual chapters
are referred to as the chapter numbers.
Some VCDs do not have the P.B.C. compatibility
and are capable of playback only, while some are
P.B.C.-compatible and are capable of various spe-
cial playback control operations. This player can
play both of these VCDs.
Subtitles (DVD)
Some DVD discs contains the recording of more
than one subtitle language. This player allow you
to select one of the recorded subtitle languages
during playback.
MPEG: Moving Picture Experts Group
This is an international standard for digital video
and audio compression and decompression in
media.
Track number (CD, VCD)
A track is also a section of video and audio record-
ed in a disc. The numbers assigned to individual
tracks are referred to as the track numbers.
With most of music CDs, a track is assigned to a
piece of music. However, with a VCD, the sections
of the contents do not always correspond to the
assigned tracks.
As (special) playback functions such as skipping
and programming of ordinary CDs are based on
track number data, such playback functions are
sometimes impossible with some VCDs.
Dolby Digital
This is a digital audio compression technology
developed by Dolby Laboratories. It is compatible
with 5.1-channel surround audio as well as normal
stereo (2-channel) audio and can accommodate a
large amount of audio data efficiently in a disc.
DTS
Name of a digital surround system developed by
Digital Theater Systems, Inc.
P.B.C.: Play-Back Control (VCD)
When a VIDEO CD carries "Play Back Control
capable" or similar message on the disc or jacket,
desired scenes and information can be played back
in an interactive manner using a hierarchical struc-
ture while viewing the menu screens displayed on
the TV screen.
Top menu/menu (DVD)
Some DVDs display more than one title in a screen.
This screen is referred to as the top menu.
The menu is the item display (menu screen) for use
in setting operations. The menu can be recalled
any time during playback to perform settings
according to the current software, including the
audio switching between Dolby Digital and PCM,
switching of language used in the subtitles and
spoken voice.
SRS CS II (Circle Surround II)
Circle Surround II improves on its predecessor
Circle Surround (CS5.1) by enabling you to experi-
ence powerful multi-channel surround sound
playback from mono, stereo or Dolby Surround
encoded audio and video sources.
With SRS CS II you can also listen to audio CDs,
television and radio broadcasts in full surround
sound. You will discover a new type of sound expe-
rience through SRS Circle Surround II.
|
94
English
Troubleshooting Guide
Some system functions are limited to control depending on your setup.
• Zone cannot be set.
• The "Rear Bass Boost" of Surround Control Adjust cannot be set.
• The rear speakers of DTA cannot be set.
• The "Position Fine Control" of rear speakers cannot be set.
• The "Channel Level" of rear speakers cannot be set.
• The SRS CS II cannot be set.
The rear speakers have been set to
"NONE" on the Speaker Set Up screen
(page 54).
• No Surround Control (Sound Field) can be set.
• No signals can be set.
• The "Parametric Equalizer" cannot be set.
• The "Position (Position Fine Control)" cannot be set.
• The "Car Type Setup" value cannot be set.
• The "Speaker Setup" value cannot be set.
• No crossover frequency can be set.
The Zone Control has been turned On
(page 92).
• The "Channel Level" (test signal output) cannot be set.
• The Surround Control (Sound Field) cannot be set to
"Bypass+Center".
• The "Center Level" of Surround Control Adjust cannot be set.
• The "Center Width Control" of Surround Control Adjust cannot
be set.
• The center speaker for DTA cannot be set.
• The "Position Fine Control" of the center speaker cannot be set.
• The "Channel Level" of the center speaker cannot be set.
The center speaker has been set to
"NONE" on the Speaker Set Up screen
(page 54).
The Surround Control (Sound Field)
(page 82) has been set to "Bypass" or
"Bypass+Center".
• The Surround Control Adjust cannot be set.
The center and rear speakers have been
set to "NONE" on the Speaker Set Up
screen (page 54).
• The Surround Control (Sound Field) cannot be set to "Dolby
PLII".
• The subwoofer of DTA cannot be set.
• The "Position Fine Control" of the subwoofer cannot be set.
• The "Channel Level" of the subwoofer cannot be set.
The subwoofer has been set to "NONE"
on the Speaker Set Up screen (page 54).
The Surround Control (Sound Field)
(page 82) has been set to "Dolby PLII".
• No sound effectors of SRS WOW.
|
English
95
What might appear to be a malfunction in your unit may just be the result of slight misopera-
tion or miswiring. Before calling service, first check the following table for possible problems.
✔
The parking brake is not engaged.
For safety reasons no television/video images
are displayed while the vehicle is moving.
Engaging the parking brake will cause images
to be displayed.
General
The power does not turn on.
?
✔
The fuse has blown.
After checking for short circuits in the wires,
replace the fuse with one having the same
rating.
The screen is dark.
✔
?
The unit is in a location where temperature is
low.
✔
The speaker wire has a short-circuit or touches
the chassis of the vehicle, and then the
protection function is activated.
If the temperature of the monitor unit drops,
the screen may appear darker when power is
first turned on due to the characteristics of a
liquid crystal panel. Wait a while after turning
power on for the temperature to rise. Normal
brightness will return.
Wire or insulate the speaker cable properly and
press the reset button.
The desired source is NOT selected although
you pressed the SRC button.
?
✔
A non-connected source cannot be selected.
A non-connected source is not selected. See
<INSTALLATION MANUAL> and connect the
unit correctly.
The screen does not darken when the vehicle’s
lights are turned on.
?
✔
The unit is set to auto dimmer.
When the unit is set to auto dimmer, it is not
linked to the vehicle's light switch.
✔
The RESET button is not pressed yet although
the optional unit has been connected to the
system.
✔
The illumination wire has not been connected.
(If manual dimmer is set)
Press the reset button (page 4).
Make proper connections according to
<INSTALLATION MANUAL>.
✔
✔
The "O-N" switch of the optional unit is at the
"O" position.
Set the "O-N" switch to the "N" position.
AM/FM radio reception is poor and/or there is
noise.
?
A disc changer not supported by the system is
used.
✔
The TV antenna and vehicle‘s radio antenna are
too close.
Use a disc changer supported by the system
(page 4).
Separate the two antennas as far as possible.
Turn off the main unit.
The message "Disconnected cable found.
Please confirm a connection line" is displayed
and the unit cannot be used.
?
The remote controller does not operate.
?
?
✔
The remote control mode selector is not set
correctly.
✔
Receiver unit is disconnected.
Switch the remote control mode selector
according to the source you select (page 12).
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
No sound can be heard, or the volume is low.
Nothing happens when the buttons are
pressed.
?
?
✔
Attenuator is turned on.
Turn off Attenuator.
✔
The computer chip in the unit is not
functioning normally.
✔
The fader or balance settings are set all the
way to one side.
Press the reset button on the unit (page 4).
Reset the fader and/or balance settings.
No television/video image appears.
✔
The input/output wires or wiring harness are
connected incorrectly.
✔
The unit is not connected to the parking brake
detection switch.
Reconnect the input/output wires or the
wiring harness correctly. See the section on
<INSTALLATION MANUAL>.
Make proper connections according to
<INSTALLATION MANUAL>.
|
96
English
Troubleshooting Guide
The sound quality is poor or distorted.
The voice (or subtitle) language cannot be
changed.
?
?
✔
One of the speaker wires is being pinched by a
screw in the car.
✔
The DVD disc being played does not contain
the recording of more than one audio (or
subtitle) language.
Check the speaker wiring.
✔
The speakers are not wired correctly.
Reconnect the speaker wires so that each
output terminal is connected to a different
speaker.
The voice (or subtitle) language cannot be
changed when the DVD disc being played
does not contain the recording of more than
one voice (or subtitle) language.
Radio reception is poor.
?
?
The viewing angle cannot be changed.
?
✔
The car antenna is not extended.
Pull the antenna out all the way.
✔
The DVD disc being played does not contain
the recording of more than one angle.
The viewing angle cannot be changed when
the DVD disc being played does not contain
the recording of more than one angle.
✔
The antenna control wire is not connected.
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
The memory is erased when the ignition is
turned off.
✔
You are attempting to switch the angle in a
DVD section where more than one angle is not
recorded.
✔
The battery wire has not been connected to
the proper terminal.
More than one viewing angle may be recorded
only in limited sections in a disc.
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
Playback will not start even after a title is
selected.
?
?
✔
The ignition and battery wire are incorrectly
connected.
✔
A viewing restriction (RATING) has been set for
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
the disc.
Check the viewing restriction level (RATING)
setting.
Does not switch to the rear view camera video
display when pressing the [V.SEL] button.
?
?
The voice or subtitle language selected in the
initial setting is not played.
✔
The reverse sensor wire is disconnected.
Connect the wire correctly, referring to the
section on <INSTALLATION MANUAL>.
✔
The DVD disc being played does not contain
the recording of the selected voice or subtitle
language.
The sound/picture skips on a DVD/VCD/CD.
Use a DVD disc containing the recording of the
selected voice or subtitle language.
✔
The disc is scratched or dirty.
Clean the disc, referring to the section on
<Disc cleaning> (page 15).
A track will not play.
?
?
✔
Random play has been selected.
Turn off random play.
A VCD cannot be played using menus.
✔
The VCD disc being played is not compatible
with P.B.C.
Menu playback is available only with VCD discs
recorded with P.B.C.
The subtitle is not displayed.
?
✔
The DVD disc being played does not contain
the recording of subtitles.
The subtitle cannot be displayed when the
DVD disc being played does not contain the
recording of subtitles.
|
English
97
Disc source
Can’notremove disc.
?
✔
The cause is that more than 10 minutes has
elapsed since the vehicle ACC switch was
turned OFF.
The disc control mode cannot be selected.
?
✔
No wire has been connected to the disc
changer input terminal on the unit.
Connect the wire to the disc changer input
terminal on the unit.
The disc can only be removed within 10
minutes of the ACC switch being turned OFF.
If more than 10 minutes has elapsed, turn
the ACC switch ON again and press the Eject
button.
The specified disc does not play, but another
one plays instead.
?
✔
✔
✔
The specified CD is quite dirty.
Clean the CD.
MP3/WMA source
The CD is upside-down.
Load the CD with the labeled side up.
Cannot play an MP3/WMA.
?
✔
The media is scratched or dirty.
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the number
for the specified disc.
Clean the media, referring to the CD cleaning
of the section on <About discs> (page 15).
The sound skips when an MP3/WMA is being
played.
?
✔
The disc is severely scratched.
Try another disc instead.
✔
The media is scratched or dirty.
Clean the media, referring to the CD cleaning
of the section on <About discs> (page 15).
The sound skips.
?
✔
Something is touching the disc changer.
Remove whatever is touching it.
✔
The recording condition is bad.
Record the media again or use another media.
✔
The CD is scratched or dirty.
The MP3/WMA track time is not displayed
correctly.
?
?
If skipping happens at the same place when
the car is stopped, something with the CD is
wrong. Clean the CD.
✔
---
There are times when it isn’t displayed correctly
according to the MP3/WMA recording
conditions.
The display shows that the changer is being
played, but no sound can be heard.
?
?
?
✔
The computer chip in the unit is not
functioning normally.
Press the reset button on the unit (page 4).
Cannot display the ID3 tag information
correctly.
✔
Record is not made in conformity with the ID3
tag version 1.x.
The specified track will not play.
✔
Random play or magazine random play has
been selected.
Turn off random play or magazine random
play.
Record in conformity with the ID3 tag version
1.x.
Also, the display may be incorrect if an
MP3/WMA file uses the ID3 tag v1.x standard
and if this standard has been expanded after
production of the machine software.
Track repeat, disc repeat, track scan, disc scan,
random play, and magazine random play start
by themselves.
✔
The setting is not cancelled.
The settings for these functions remain on until
the setting to off or the disc ejected, even if
the power is turned off or the source changed.
|
98
English
Troubleshooting Guide
The following messages are displayed when
certain problems are occurring in your sys-
tem. Take the recommended actions.
Hot Error
The protective circuit in the unit activates when the
temperature inside the unit exceeds 60°C (140°F),
stopping all operation.
]Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
Hold Error
The protective circuit in the unit activates when
the temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.
]Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
Mecha Error
The disc player is malfunctioning.
]Eject the disc and try inserting it again. Contact the
Kenwood dealer if this indicator continues blinking
or the disc cannot be ejected.
Disc Error
The unplayable discs is inserted.
Read Error
The disc is upside-down.
]Load the disc with the labeled side up.
The disc is quite dirty.
]Clean the disc, referring to the section on <Disc
cleaning> (page 15).
Region code Error
The DVD software encoded for other region code.
Parental level Error
The parental level is set to high levels.
Error 07 — 67
The unit is malfunctioning for some reason.
]Press the reset button on the unit. If the "Error ##"
code does not disappear, consult your nearest
service center.
|
English
99
Specifications (KVT-727DVD)
Specifications subject to change without notice.
Monitor Section
DSP Section
Picture size
4 BAND Parametric equalizer
: 6.95 inches (diagonal) wide
BAND1 frequency: 60/80/100/120/160/200Hz
154.1(W)×87.1(H)mm
Display system
: Transparent TN LCD panel
Drive system
: TFT active matrix system
Number of pixels
: 336,960 (480H×234V×RGB)
Effective pixels
: 99.99%
Pixel arrangement
: RGB striped arrangement
Back lighting
: Cold Cathode Fluorescent Tube
BAND2 frequency: 250/315/400/500/630/800/1kHz
BAND3 frequency: 1.25k/1.6k/2k/2.5k/3.15k/4kHz
BAND4 frequency: 5k/6.3k/8k/10k/12.5k/16kHz
Gain
: -9/-7/-5/-3/-2/-1/0/1/2/3/5/7/9dB
Q control
: 0.25/0.5/1.0/2.0
X'over
High pass filter:
frequency: Through/30/40/50/60/70/80/90/100/120/
150/180/220/250Hz
slope: Through/-12/-18/-24dB/oct
Low pass filter:
frequency: Through/30/40/50/60/70/80/90/100/120/
150/180/220/250Hz
DVD Section
slope: Through/-12/-18/-24dB/oct
Time alignment
: 0~6.1m (5cm Step)
D/A Converter
: 24Bit
Decoder
: Linear PCM/Dolby Pro Logic II/Dolby Digital/dts/
MP3/WMA
Channel level
:
10dB
Wow & Flutter
: Below Measurable Limit
FM Tuner section
Frequency response
Sampling frequency;96k: 20~22,000Hz
Frequency range (50kHz)
: 87.5~108.0MHz
Sampling frequency;48k: 20~22,000Hz
Sampling frequency;44.1k: 20~20,000Hz
Total harmonic distortion (1k)
: 0.007%
Signal to Noise ratio
: 95dB (DVD-Video 96kHz)
Dynamic range
: 95dB (DVD-Video 96kHz)
DISC Format
: DVD-Video/VIDEO-CD/CD-DA
Sampling frequency
: 44.1kHz/48kHz, 96kHz
Usable sensitivity (S/N=30dB)
: 0.7μV/75Ω
Quieting sensitivity (S/N=46dB)
: 1.6μV/75Ω
Frequency response ( 3.0dB)
: 30Hz~15kHz
S/N (dB) (MONO)
: 65dB
Selectivity ( 400kHz)
: ≥ 80dB
Stereo separation
: 35dB (1kHz)
Quantifying bit number
: 16/20/24bit
LM Tuner section
Frequency range (9kHz)
: 153kHz~281kHz
Usable sensitivity
: 45μV
WM Tuner section
Frequency range (9kHz)
: 531kHz~1611kHz
Usable sensitivity
: 25μV
Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light
incorrectly.
|
100
English
Video section
Color system of external video input
: NTSC/PAL
External video input level (RCA jacks)
: 1Vp-p/75Ω
External audio max input level (RCA jacks)
: 1V/22kΩ
Analog RGB input
: 0.7Vp-p/75Ω
Audio section
Maximum Power (Front&Rear)
: 50W×4
Output power (Front&Rear) (DIN 45324, +B=14.4V)
: 30W×4
Preout level (V)
: 5V/10kΩ
Preout impedance
: 80Ω
General
Operating voltage
: 14.4V (11V~16V)
Current consumption
: 15A
Dimensions (W×H×D)
Main Unit Installation: 182mm×53mm×161mm
Hideaway unit: 225mm×40mm×168mm
Operational temperature range
: -10°C~60°C
Storage temperature range
: -20°C~85°C
Weight
Main unit: 2.2kg
Hideaway unit: 1.2kg
|
English
101
Specifications (KVT-627DVD)
Specifications subject to change without notice.
Monitor section
LW Tuner section
Picture size
Frequency range (9kHz)
: 153kHz~281kHz
Usable sensitivity
: 45μV
: 6.95 inches wide
154.1(W)×87.1(H)mm
Display system
: Transparent TN LCD panel
Drive system
MW Tuner section
: TFT active matrix system
Frequency range (9kHz)
: 531kHz~1611kHz
Usable sensitivity
: 25μV
Number of pixels
: 336,960 (480H×234V×RGB)
Effective pixels
: 99.99%
Pixel arrangement
: RGB striped arrangement
Video section
Color system of external video input
: NTSC/PAL
Back lighting
: Cold Cathode Fluorescent Tube
External video input level (RCA jacks)
: 1Vp-p/75Ω
DVD section
External audio max input level (RCA jacks)
: 1V/22kΩ
Analog RGB input
: 0.7Vp-p/75Ω
D/A Converter
: 24Bit
Decoder
: Linear PCM/Dolby Digital/dts/MP3/WMA
Wow & Flutter
: Below Measurable Limit
Audio section
Maximum Power (Front&Rear)
: 50W×4
Frequency response
Sampling frequency;96k: 20~22,000Hz
Output power (Front&Rear) (DIN 45324, +B=14.4V)
Sampling frequency;48k: 20~22,000Hz
Sampling frequency;44.1k: 20~20,000Hz
Total harmonic distortion (1k)
: 0.007%
Signal to Noise ratio
: 98dB (DVD-Video 96kHz)
Dynamic range
: 98dB (DVD-Video 96kHz)
: 30W×4
Preout level (V)
: 5V/10kΩ
Preout impedance
: 80Ω
Tone action
Bass: 100 Hz 10 dB
Middle: 1 kHz 10 dB
Treble: 10 kHz 10 dB
DISC Format
: DVD-Video/VIDEO-CD/CD-DA
Sampling frequency
: 44.1kHz/48kHz, 96kHz
General
Quantifying bit number
: 16/20/24bit
Operating voltage
: 14.4V (11V~16V)
Current consumption
: 15A
FM Tuner section
Dimensions (W×H×D)
Frequency range (50kHz)
: 87.5~108.0MHz
Usable sensitivity (S/N=30dB)
: 0.7μV/75Ω
Quieting sensitivity (S/N=46dB)
: 1.6μV/75Ω
Frequency response ( 3.0dB)
: 30Hz~15kHz
Main Unit Installation: 182mm×53mm×161mm
Hideaway unit: 225mm×40mm×168mm
Operational temperature range
: -10°C~60°C
Storage temperature range
: -20°C~85°C
Weight
Main unit: 2.2kg
Hideaway unit: 1.1kg
S/N (dB) (MONO)
: 65dB
Selectivity ( 400kHz)
: ≥ 80dB
Stereo separation
: 35dB (1kHz)
|
102
English
The marking of products using lasers (Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1.
It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the
unit.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
is a trademark of SRS Labs, Inc.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
"Dolby", "ProLogic", and the double-D symbol are trademarks of Dolby Laboratories.
"DTS", and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc.
"DTS" and "DTS 2.0 + Digital Out" are trademarks of Digital Theater Systems, Inc.
|