CASSETTE RECEIVER
KRC-V679R
KRC-679R
KRC-579R
KRC-579B
INSTRUCTION MANUAL
© B64-1926-20 (EW)
Safety precautions
IMPORTANT INFORMATION
About the disc changer to be
connected:
2WARNING
2CAUTION
To prevent injury and/or fire, take the
following precautions:
• Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
• When extending the ignition, battery or
ground cables, make sure to use automotive-
grade cables or other cables with an area of
0.75mm2 (AWG18) or more to prevent cable
deterioration and damage to the cable
coating.
• To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
• Make sure not to get your fingers caught
between the faceplate and the unit.
• Be careful not to drop the unit or subject it to
strong shock.
The unit may break or crack because it
contains glass parts.
To prevent damage to the machine,
take the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not set the removed faceplate or the
faceplate case in areas exposed to direct
sunlight, excessive heat or humidity. Also
avoid places with too much dust or the
possibility of water splashing.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision equipment.
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to
"N".
To connect a disc changer having no "O-N"
switch to this unit, the converter cord CA-
DS100 and/or switching adapter KCA-S210A
are required as options.
If a model with no "O-N" switch is
connected, some unavailable functions and
information that cannot be displayed are
generated, such as the DNPS, DNPP,
Magazine random play, and CD Text display.
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
2CAUTION
You can damage both your unit and
the CD changer if you connect them
incorrectly.
• Do not touch the liquid crystal fluid if the
LCD is damaged or broken due to shock. The • To prevent short circuits when replacing a
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.
fuse, first disconnect the wiring harness.
• Do not place any object between the
faceplate and the unit.
• During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
— 3 —
Safety precautions
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
Cleaning the Tape Head
NOTE
After you have used the tape player many
times over a long period, magnetic powder
from the tapes and dust accumulates on the
tape head, causing noise and a deterioration
in sound quality. Clean the tape head using a
cleaning tape or cleaning kit designed for use
in car audio systems.
• If you experience problems during
installation, consult your Kenwood dealer.
• If the unit does not seem to be working
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenwood dealer.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
Handling Cassette Tapes
AUD
• Do not play a cassette whose tape has gone
slack. In such a case, wind it tight using a
pencil or the like in one of the spools.
Playing slack cassette tapes can result in the
tape tangling around the capstan and/or
pinch rollers, causing trouble.
• Do not play a deformed cassette or one
whose label is starting to come off, as it can
cause the unit to malfunction.
• Do not leave tapes in hot places, such as
above the fascia panel (dashboard) and other
spots exposed to direct sunlight, or near
heater outlets. They can deform the
cassette.
• Avoid using extremely long cassette tapes,
such as 100-minute-long tapes. Such tapes
are very thin, and can tangle easily around
the pinch rollers or other parts inside the
unit, causing unit failure.
2CAUTION
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
Reset button
• Characters in the LCD may become difficult
to read in temperatures below 41 ˚F (5 ˚C).
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
• The functions that can be used and the
information that can be displayed will differ
depending on the external disc players being
connected.
• Remove a cassette tape from the unit when
not listening to it for a whilst. If you leave a
tape in the unit too long, it may stick to the
tape head and cause unit malfunction.
— 4 —
General features
Power
Q/
AUD
SRC/
PWR OFF
5
CLK
Turning on the power:
Press the SRC button.
NOTE
PROG
/PTY
PWR OFF
Turn the power on before carrying out the following procedures.
Turning off the power:
AUD
Hold down the PWR OFF button for one second or more.
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
T
I
DISP
VOL ADJ NAME.S
NOTE
The status of the Code Security Function (page 26) is displayed
whenever the power is switched on.
"CODE ON" : Security Code has been registered
"CODE OFF" : Security Code has not been registered
∞
4
¢
Release
button
FM
ATT/
LOUD
AM
KRC-V679R
ATT indicator
Clock indicator
Volume
Increasing Volume:
Press the 5 button to turn up the volume.
Decreasing Volume:
Press the ∞ button to turn down the volume.
LOUD indicator
System Q indicator
Speaker setting
indicator
KRC-679R/KRC-579R/KRC-579B
Clock indicator
ATT indicator
Speaker
setting indicator
LOUD indicator
System Q indicator
— 5 —
General features
function under Menu settings (page 32).
The Power OFF Timer function is enabled only after the security
code (page 26) is set up.
Switching Modes
Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
NOTE
Selecting AUX-name display
Holding down the DISP button for two seconds or more during
the AUX mode, AUX-name display is blinked for AUX-name
selection mode.
Pressing 4 or ¢ button during this mode allows you to select
"AUX" , "TV" , "VCP" , "GAME" or "PORTABLE" in the AUX mode.
The AUX-name selection mode can be exited by pressing the
DISP button or doing nothing for 10 seconds.
▼
Tuner mode
▼
Tape mode
▼
External disc control mode 1
▼
External disc control mode 2 / AUX mode
▼
Standby mode
Selecting the standby mode:
Press the SRC button repeatedly to select to "ALL OFF" .
When "ALL OFF" is displayed, the standby mode is turned on.
The standby mode turns all functions off although leaving the
unit’s power on. Use this mode when you want to have the
display illuminated but do not want to listen to anything.
Attenuator
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
Press the ATT button to switch the attenuator on and off.
When the attenuator is on, the ATT indicator blinks.
When the attenuator is off, the volume returns to the original
level.
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• To enable the selection of External disc control mode 2/AUX
mode, you should connect optional switching adapter KCA-
S210A (which allows you to select both External disc control
mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC-
CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or
switching adapter CA-C1AX (which allows you to select AUX
mode only).
NOTE
Turning the volume up, or turning it all the way down deactivates
the attenuator function.
During the AUX mode, "AUX" (or AUX-name display) will show
in the display. When the CA-C1AX is being used, the AUX Mode
will replace the External Disc Control Mode.
• If you have selected Standby mode, the timer function that
turns the power off automatically will be activated.
To find out how to set the time on the timer, and how to cancel
the timer function, refer to the section on the Power OFF Timer
Loudness
This function amplifies low and high tones when the volume is
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Turning Loudness On/Off:
— 6 —
Hold down the LOUD button for one second or more to switch
the loudness on and off.
with the System Q, according to types of speakers.
1 Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2 Press the Q button to enter the speaker setting mode.
3 Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") /
For 5/4 in. speaker ("SP 5/4inch")/
System Q
You can recall the best audio setting preset for different types
of the music.
For the OEM speaker ("SP O.E.M.")
4 Press the Q button to end the speaker setting mode.
NOTE
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Speaker setting function allows for tuning of bass, middle and
treble.
Scan of Flat – Easy
(Default setting)
Easy
Jazz
Pops
User memory*
*User memory:
Flat
The unit returns to the state
adjusted the last time with
the audio control setting feature.
Top 40
Rock
As you proceed, each indicator would go on.
NOTE
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, and treble level.
Their setting values are different depending on the setting of the
speaker setting mode.
Speaker Setting
This function allows you to adjust the setting that is recalled
— 7 —
General features
Adjustment
mode
Audio Control Setting
Adjust various parameters of sound quality.
Operation of Audio control button
4 button
Bass decreased.
Middle decreased.
¢ button
(Display)
1 Hold down the AUD button for one second or more to enter
Bass ("Bass")
Bass increased.
the control mode.
Middle("Middle")
Treble("Treble")
Balance("Balance")
Fader ("Fader")
Middle increased.
2 Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Treble decreased.
Treble increased.
Right channel emphasized.
Left channel emphasized.
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Rear channel increased.
Front channel increased.
Volume Offset
("V Offset")
The sound level of
each source increased.
The sound level of
each source decreased.
Volume Offset
Fader
Bass
Middle
Treble
4 Press the AUD button to end the control mode.
NOTE
Balance
Determining the parameters in the audio control setting will clear
all the adjustments made in the System Q and they are replaced
with the values made in the audio control setting.
NOTE
Source tone memory
Each source (tape, CD, MD, FM, AM and disc changer) has its
own memory in which to store the bass, middle and treble tone
settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Clock display
3 Adjust each mode
Press the 4/¢ button.
Changing the Clock Display:
Look at the table to adjust the mode being displayed.
Each time you press the CLK button, the display switches
between the clock and each mode display.
NOTE
The clock indicator lights whilst the clock is displayed.
— 8 —
TEL Mute
Shut down the audio system temporarily whenever an
incoming call is received.
NOTE
The function will not work if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL Mute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
— 9 —
General features
Theft Deterrent Faceplate
The faceplate can be reversed to hide the control panel or
detached form the unit, helping to deter theft.
Removing the Faceplate:
1 • When the control panel is visible:
Press the release button.
2CAUTION
• When the control panel has been hidden:
Press the upper side of the faceplate.
Do not set the right side of the faceplate in the faceplate bracket
first, when reattaching the faceplate. Doing so may cause the
connector on the faceplate bracket to malfunction.
2 Holding the centre part of the faceplate, pull it out.
2 Press the right side of the faceplate until it locks.
Hiding the control panel:
1 Press the release button and slide open the faceplate.
2 Push upward the back of the control panel and reverse the
panel.
3 Push back the bottom of the faceplate bracket until it locks.
2CAUTION
• Do not apply excessive force to the faceplate bracket without
attaching the faceplate. Doing so will cause the faceplate
bracket to be deformed.
• Do not touch the connector on the faceplate bracket after
removing the faceplate. Touching the connector may cause
damage to the unit.
NOTE
The panel cannot be reversed when the faceplate is not attached.
NOTE
Opening the control panel:
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case whilst detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
1 Press the upper side of the faceplate.
The faceplate will open.
2 Push the bottom of the control panel and close the faceplate.
Reattaching the Faceplate:
1 Hold the faceplate so that the control panel faces the front
toward you and set the left side of the faceplate in the
faceplate bracket.
— 10 —
Tuner features
NOTE
SRC
FM
Whilst the control panel is sliding, only available buttons are 0,
ATT, ▼, ▼ and SRC.
PROG
/PTY
PWR OFF
AUD
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
T
I
DISP
VOL ADJ NAME.S
4
¢
# 1-6
DISP
AM
KRC-V679R
Band display
Frequency
ST indicator
Preset station number
AUTO indicator
KRC-679R/KRC-579R/KRC-579B
Band display
Frequency
ST indicator
Preset station number
AUTO indicator
— 11 —
Tuner features
You can then recall that station with a single touch of a button.
Tuning
1 Select the band/station that you want to have stored.
1 Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.
2 Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Press the AM button to select the MW and LW bands.
3 • Auto Seek Tuning
NOTE
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
NOTE
If the frequencies stored at the preset numbers receive
stations which were not originally memorized when travelling
long distances, the preset number is not displayed. In such
cases, pressing the 4/¢ button to use preset station
seek will receive channel 1.
Switching Display for Tuner
You can change the display used when listening to the radio.
Switching the Display:
Each time you press the DISP button, the display changes as
follows:
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
Programme Service name (only during RDS station reception)/
Station frequency
NOTE
• The ST indicator lights up when stereo broadcasts are being
received.
Radio text (only during RDS station reception)
• Please see the menu settings about selecting tuning mode.
(page 30)
Displaying Frequencies during programme service name
display:
Hold down the DISP button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
NOTE
Station Preset Memory
If the RDS station currently tuned to is transmitting no text whilst
the Radio Text Display mode is turned on, "NO TEXT" will appear
Store the frequency of the station currently being listened to.
— 12 —
RDS features
in the display. Whilst awaiting reception, “Waiting” will be
displayed.
TI/
VOL ADJ
PTY
FM
2WARNING
To prevent accidents, drivers should not look at the display whilst
driving.
PROG
/PTY
PWR OFF
AUD
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
T
I
DISP
VOL ADJ NAME.S
4
¢
# 1-6
DISP
AM
KRC-V679R
Band display
PTY indicator
TI indicator
KRC-679R/KRC-579R/KRC-579B
Band display
PTY indicator
TI indicator
— 13 —
RDS features
RDS (Radio Data System)
Traffic Information Function
RDS is a digital information system that lets you receive
signals besides those of regular radio programmes, such as
network information being transmitted from radio stations.
When listening to an RDS station (ie, a station with RDS
capability), the programme service name of the station is
displayed along with the frequency, advising you quickly
which station is being received.
RDS (Radio Data System) stations also transmit frequency data
for the same station. When you are making long trips, this
function automatically switches to the particular frequency
with the best reception for the particular network of stations
that you want to listen to. The data is automatically stored,
allowing you to switch quickly to another RDS stations,
broadcasting the same programme, that has better reception.
These include stations stored in the station preset memory
that you often listen to.
You can listen to traffic information. If you are listening to
tapes or discs, they will continue playing until a traffic bulletin
is broadcast.
Turning TI function On/Off:
Press the TI button to turn the function on and off.
When the function is on, the TI indicator is turned on.
When none is being received, the TI indicator will blink on and
off. When a traffic information station is being received, the TI
indicator will turn on.
When a traffic bulletin begins to be broadcast, “Traffic Info”
will be displayed, and reception will begin at the preset
volume.
If you are listening to a tape or disc when a traffic bulletin
begins, they will automatically be turned off. When the bulletin
ends or poor reception is experienced, the tape or disc will
begin playing again.
NOTE
Pressing the TI button whilst in the MW/LW band automatically
switches reception to the FM band. However, the MW/LW band
is not returned to when the TI button is pressed again.
Enhanced Other Network
Switching to a Different Traffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI
stations in a certain band.
Stations that offer <Enhanced Other Network> also transmit
information about other RDS stations that have traffic
information. When you are tuned to a station that is not
transmitting traffic information, but another RDS station starts
transmitting a traffic bulletin, the tuner automatically switches
to the other station for the duration of the bulletin.
NOTE
• When you are listening to a tape or disc, you cannot change to
another TI station.
• When the auto TP seek function is turned on and reception
starts to weaken, the tuner automatically seeks traffic
information stations with better reception.
• If you are tuned to a station that is not a traffic information
station itself but which provides <Enhanced Other Network>
services, you can still have traffic information received.
• Holding down the TI button for one second or more when the
TI function is on in the tape or disc mode results in a change to
the frequency display of the traffic information station for five
seconds.
Alarm
When an emergency transmission (announcing disasters, etc.)
is sent, all current functions are interrupted to allow the
warning to be received.
— 14 —
NOTE
Presetting Volume for Traffic Information/News
Please see the menu settings (page 32) about switching between
manual scrolling and automatic scrolling.
Preset the volume level to be used for traffic information and
news broadcasts.
1 Tune into the station for which you want to set the volume.
2 Adjust the volume to the desired level.
3 Hold down the VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
NOTE
• The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
• You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.
Radio Text Scroll
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
1 Press the DISP button to display the Radio Text.
2 Holding down the DISP button for one second or more results
in one scrolling display of the text.
To scroll automatically:
1 Press the DISP button to display the Radio Text.
The text will be displayed in one scrolling display.
2 Holding down the DISP button for one second or more results
in one scrolling display of the text.
— 15 —
RDS features
24. Jazz Music
(Jazz)
Programme Type (PTY) Function
Conduct auto seek tuning only on those stations with selected
kinds of programmes.
25. Country Music
26. National Music
27. Oldies Music
28. Folk Music
(Country)
(Nation M)
(Oldies)
(Folk M)
(Document)
1 Press the PTY button.
29. Documentary
"PTY" is displayed, and the Programme Type Selection (PTY)
Mode entered.
(Speech.....1~9,16~23, 29, Music.....10~15, 24~28)
• You can select the type of programme directly by pressing a
preset button. The buttons are factory-set to the following
type of programmes:
If you make no key input in 30 seconds, the mode will
automatically turn off.
NOTE
1. Music
4. Other Music
2. Speech
5. Serious Classical
3. News
6. Varied
You cannot use this function whilst the traffic bulletin is received.
NOTE
Changing the Preset Button Settings for Programme Type
2 Select the type of programme to be received
• Press either the FM or AM button repeatedly until the type of
programme you want to listen to.
After selecting the type of programme to be stored in a certain
preset button, hold down that button for two seconds or more.
The previously stored data for that button are erased and the
new programme type is stored.
The selection includes:
Speech
(Speech)
(Music)
(News)
Music
3 Seeking the selected programme type
1. News
Press the 4 or ¢ button to make a seek of frequencies
2. Current Affairs
3. Information
4. Sports
(Affairs)
(Info)
with your selected type of programme.
The display blinks and the seek starts.
(Sport)
If your selected type of programme is found, the name of the
station is displayed and the station is tuned into.
"PTY Found" is displayed for about 30 seconds.
If you make no key input in 30 seconds, the PTY selection
mode will turn off automatically.
5. Education
6. Drama
(Educate)
(Drama)
(Culture)
(Science)
(Varied)
7. Culture
8. Science
9. Varied
NOTE
10. Pop Music
11. Rock Music
12. Easy Listening Music
13. Light Classical
14. Serious Classical
15. Other Music
16. Weather
(Pop M)
(Rock M)
(Easy M)
(Light M)
(Classics)
(Other M)
(Weather)
(Finance)
If no programme can be found, "NO PTY" is displayed.
If you want to select another type of programme, repeat steps 2
and 3 above.
Switching to Other Stations with the Same Type of
Programme:
When "PTY Found" is displayed, perform auto seek tuning.
The tuner scans for another station with the same type of
programme.
17. Finance
18. Children’s programmes (Children)
19. Social Affairs
20. Religion
21. Phone In
22. Travel
(Social)
Cancelling Programme Type Function During Its Operation:
(Religion)
(Phone In)
(Travel)
Press the PTY button.
23. Leisure
(Leisure)
— 16 —
Cassette player features
Changing Language for Programme Type(PTY)
Function
PROG
SRC FM
Changing the display language to another language.
PROG
/PTY
PWR OFF
1 Press the PTY button.
"PTY" is displayed, and the Programme Type Selection (PTY)
Mode entered.
AUD
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
T
I
DISP
VOL ADJ NAME.S
2 Enter the Changing Language Mode
Press the DISP button to enter the changing language mode.
3 Changing the Display Language
Press the FM or AM button.
4
¢
Release
button
B NR
B.S REP
MTL DISP
AM
0
Each time the button is pressed, the display language will
change as follows:
KRC-V679R
English
Spanish
French
Dutch
German
Swedish
Tape running display
Play side
IN indicator
Portuguese
Norwegian
4 Press the DISP button to end the changing language mode.
MTL indicator B NR indicator
KRC-679R/KRC-579R/KRC-579B
Tape running display
Play side
IN indicator
MTL indicator B NR indicator
— 17 —
Cassette player features
the tape head and cause the unit to malfunction.
• Whilst the control panel is sliding, only available buttons are 0,
ATT, ▼, ▼ and SRC.
Playing Cassette Tapes
Loading and Playing Cassettes:
Press the release button to slide open the faceplate, showing
the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The tape will start playing.
Push back the bottom of the faceplate with your hand until it
locks.
The IN indicator lights up when a cassette has been loaded.
Fast Forwarding and Rewinding Cassette Tapes
Fast Forwarding Tapes:
2CAUTION
Press the FM button.
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing to
do so might deform the tape.
Rewinding Tapes:
Press the AM button.
Cancelling:
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until the tape mode is
obtained.
Press the PROG button.
Normal tape play returns.
"TAPE" is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the other side.
Using Dolby B Noise Reduction
Listen to tapes recorded using the Dolby B NR system.
Ejecting Cassettes:
Press the release button and slide open the faceplate.
Press the 0 button.
Turning Dolby NR On/Off:
The tape stops playing and the cassette ejects.
Push back the bottom of the faceplate with your hand until it
locks.
Press the B NR button to switch Dolby B NR on and off.
The B NR indicator lights up when Dolby B NR is turned on.
2CAUTION
• When the faceplate has been slid open, it might interfere with
the gear lever or something else. If this happens, pay attention
to safety and move the gear lever or take an appropriate action,
then operate the unit.
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
Switching Tape Types
Select type of tape being played.
NOTE
Switching Tape Types:
Press the MTL button to switch the MTL indicator on and off
and to select the tape type.
• Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
— 18 —
Turn the MTL indicator off for normal tape (Type I) playback.
Turn the MTL indicator on for the following tape types:
they last for 4 seconds or more.
Cancelling DPSS During Its Operation:
2
CrO (Type II) FeCr (Type III) Metal (Type IV)
Press the PROG button.
Selecting the wrong tape type may cause sound quality to
suffer.
Blank Skip
Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback. This function is on, when unit is first
powered on.
Using DPSS (Direct Programme Search System)
Skip forwards or backwards to other tracks during playback.
Skipping to Beginning of Current Track or to Previous Tracks
(Rewind DPSS):
Turning Blank Skip Function On/Off:
Press the 4 button.
Press the B.S button to switch the blank skip function on and
Press once to rewind to the beginning of the current track,
twice to rewind to the beginning of the previous track, and so
forth.
off.
“B.Skip ON” is displayed when the blank skip function is
turned on.
You can skip up to 9 tracks this way.
Playback is continued after the tape is rewound by the
indicated number of tracks.
NOTE
• If the blank space contains hiss noise, the blank skip function
may not work correctly.
• Sections recorded at low levels may trigger the blank skip
function if they last for 10 seconds or more.
Skipping to Later Tracks (Fast Forward DPSS):
Press the ¢ button.
Press once to fast forward to the next one track, twice to fast
forward to the track after that, and so forth.
Up to 9 tracks can be skipped.
Playback is continued after the tape is fast forwarded by the
indicated number of tracks.
NOTE
• During the first 5 seconds of each track, the previous track is
considered the "current" track (i.e., the "0" track). If you press
the 4 button during that period, the tape rewinds to the
beginning of the previous track and not the one you are
listening to.
• The DPSS function "knows" where a track begins by detecting
the blank space preceding it (i.e., the space between tracks).
However, when the blank space lasts for less than 4 seconds or
contains noise, DPSS may not operate correctly. Furthermore,
quiet intervals within a song are detected as "blank spaces" if
— 19 —
Cassette player features
External disc control features
Music Repeat
Repeatedly plays the current track.
38
SRC FM
Turning Music Repeat Function On/Off:
Press the REP button to switch the music repeat function on
and off.
PROG
/PTY
PWR OFF
"Repeat ON" is displayed when music repeat is turned on.
AUD
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
T
I
DISP
Cancelling Music Repeat Function:
VOL ADJ NAME.S
Press either the REP or PROG button.
NOTE
The music repeat function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.
4
¢
SCAN RDM REP M.RDM DISP/
NAME.S
AM
KRC-V679R
Track time
Track number
Switching Display for Cassette Tapes
Switch the display that appears whilst tapes are playing.
Switching the Tape display:
Disc number
Each time you press the DISP button, the display during tape
play switches as follows:
KRC-679R/KRC-579R/KRC-579B
Play side + Tape counter
Play side + Tape running
Play side
Track number
Track time
NOTE
The tape counter is not exact, but only represents an
approximation of the elapsed time.
Disc number
— 20 —
Playing Disc mode
This function permits the connection of optional players and
the playing of discs.
Track time
Disc name (DNPS) (only when being preset)
Disc title (Units featuring CD text/MD only)
Track title (Units featuring CD text/MD only)
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
NOTE
NOTE
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
• "CD" ...when a CD player is connected
• "DISC" ...when a disc changer is connected
• "DISC-1" , "DISC-2" ...when two disc changers are connected
• You can give names to discs through the presetting disc name
function (page 24).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "NO TEXT" is
displayed for CD and "NO TITLE/NO NAME" is displayed for
MD.
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
• If you attempt to display disc title/track title when connecting
the CD changer not supported for CD text feature, caution
messages such as "NO TEXT" or "Reading" may be displayed.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
NOTE
• When one disc has finished playing its last track, the next disc
in the changer starts playing. When the last disc in the changer
has finished, the player returns to the first disc and starts
playing it.
• Disc #10 is displayed as "0".
Switching Display for Discs
Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows:
— 21 —
External disc control features
NOTE
Fast Forwarding and Reversing Disc Play
(For disc changers)
You cannot make a forward track search when listening to the
last track on a disc.
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
Disc Search
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
cancelled when it reaches the beginning of a track, at which
point normal play automatically resumes.
Search forwards or backwards through the discs in a disc
changer until you reach the one that you want to listen to.
Making a Reverse Disc Search:
Press the AM button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
Press the FM button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Track Search
Search forwards or backwards through the tracks on the disc
until you reach the one that you want to listen to.
Play starts at the beginning of the displayed disc.
NOTE
Making a Reverse Track Search:
“Load” is displayed when discs are being exchanged on the disc
changer.
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current
track, twice to search back to the beginning of the previous
track, and so forth.
Play starts at the beginning of the displayed track number.
NOTE
(For disc changers)
Pressing the 4 button whilst listening to track 1 only searches
back to the beginning of that track. The reverse search is not
"recycled" to the last track on the disc.
Track / Disc Repeat
Repeat playing the current track or disc.
Turning Repeat Play Function On/Off:
Press the REP button to switch the repeat play function on and
off as follows :
Making a Forward Track Search:
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
Play starts at the beginning of the displayed track number.
— 22 —
Random Play
▼
Track Repeat ON
Play all the tracks on the current disc in random order.
▼
Disc Repeat ON
1 Press the RDM button to switch the random play function on
and off.
▼
Repeat OFF
“Random ON” is displayed when random play is turned on.
The display of the track number changes continuously as the
next track is being selected.
When the track has been selected, play starts.
The selected track number blinks in the display as it is being
played.
“Repeat ON”/”T-Repeat ON” is displayed and the track
number blinks in the display when track repeat is on.
“Disc Repeat ON”/”D-Repeat ON” is displayed and the disc
number blinks in the display when disc repeat is on.
NOTE
NOTE
Repeat play is cancelled when you eject the disc.
When all the tracks on a certain disc have been played using the
random play function, the next disc on the changer starts playing
(with the random play function still turned on).
2 To change the track being heard, press the ¢ button.
Another track is selected and played.
NOTE
Track Scan
Random play is cancelled when you eject the disc.
Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Starting the Track Scan:
Press the SCAN button. “Scan ON” is displayed and the first
10 seconds of each track are played, and the tracks are played
in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the SCAN button again to stop the scan and keep on
listening to a track normally.
NOTE
• The track scan function is cancelled when you eject the disc.
• The track scan function only scans each track on a disc once.
— 23 —
External disc control features
When the disc or track to be played changes, the title is
displayed in one scrolling display.
Magazine Random Play
Play the tracks on all the discs in the disc changer in random
order.
2 Holding down the DISP button for one second or more results
in one scrolling display of the titles.
1 Press the M.RDM button to switch the magazine random play
function on and off.
NOTE
• Please see the menu settings (page 32) about switching
between manual scrolling and automatic scrolling.
• Only units with a CD text feature permit title display.
• You cannot use the text scroll function during magazine random
play.
“M.Random ON” is displayed when magazine random play is
turned on.
The display of the disc and track numbers change continuously
as the next track is being selected.
When the disc/track has been selected, play starts.
The selected disc/track number blinks in the display as it is
being played.
2 To change the track being heard, press the ¢ button.
Another disc/track is selected and played.
NOTE
Presetting Disc Names (DNPS)
• Magazine random play is cancelled when you eject the disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
Store the names of discs to be displayed when played.
1 Play the disc whose name you want to preset.
NOTE
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• The Disc Name Preset function cannot be used during the
Magazine random play as well as whilst a disc title or track title
is displayed.
Text / Title Scroll
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
2 Hold down the NAME.S button for two seconds or more.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
To scroll manually:
1 Press the DISP button to display the disc title or the track title.
3 Press either the 4 or ¢ button to move the cursor to the
desired position.
2 Holding down the DISP button for one second or more results
in one scrolling display of the titles.
The 4 button moves the cursor to the left, and the ¢
To scroll automatically:
button to the right.
1 Press the DISP button to display the disc title or the track title.
4 Each time the 38 button is pressed, the characters to be
entered change as listed below.
The titles will be displayed in one scrolling display.
NOTE
Press the FM or AM button to display the desired character.
— 24 —
Menu settings
Characters that can be displayed are as follows.
38
FM MENU
Alphabet (upper case): A ~ Z
Alphabet (lower case): a ~ z
PROG
/PTY
PWR OFF
Numerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]
Special characters: á à é è íìó ò ú ù Ñ Ç ® ß ‹fl â ä ê
AUD
LOUD
B
NR
SCAN
B.S/RDM
REP
MTL/M.RDM
T
I
DISP
VOL ADJ NAME.S
ë
îï ô ö û ü ñ ç © Æ › fi
5 Continue steps 3 and 4 until all the characters are chosen for
4
¢
DISP
AM
# 1-6
the name.
6 Press the NAME.S button.
The disc name is stored and the disc name preset mode is
cancelled.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
KRC-V679R
Menu display
NOTE
• The number of characters and discs whose names can be
stored will differ depending on the disc changer that is
connected. Please see your disc changer manual for details.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
NEWS indicator
RDS indicator
AUTO indicator
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button does not erase the disc names stored
in a disc changer.
KRC-679R/KRC-579R/KRC-579B
Menu display
NEWS indicator
RDS indicator
AUTO indicator
— 25 —
Menu settings
Menu System
Code Security Function
You can set the defaults for additional functions in the menu
mode. Make a setting for each function, referring to the
following operations.
After a security code has been registered, power cannot be
restored if the battery is disconnected from the unit unless the
code is first input.
NOTE
1 Enter the menu mode
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
All the steps in this procedure (1 through 7) must be completed
before the code security function can be turned on. However,
once the procedure is finished, it need not be repeated.
Once the code security function has been activated, “Security”
disappears from the MENU system. Note that it will no longer be
possible to cancell this function afterwards.
2 Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
1 Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2 Hold down the MENU button for one second or more.
Function items change in the order of features that follow in
the menu system.
"MENU" is displayed first and then “Security” is displayed.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep ON" in the display.
3 Hold down either the 4 or ¢ button for two seconds or
more.
"ENTER" will appear in the display for one second, indicating
the code setting mode has been entered. When "CODE"
appears in the display, you can start inputting the code.
3 Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
4 Press the preset button and enter your security code.
Use the security code shown on your Car Audio Passport.
Example: Enter "3510" as your code, pressing the buttons as
follows:
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep OFF" is displayed.
4 Ending the menu mode
Press the MENU button.
# Times
pressed
Step
Button to press
Display
NOTE
1
2
3
4
#1
#2
#3
#4
4
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
“3”
“5”
“1”
“0”
6
2
1
5 Hold down the DISP button for three seconds or more.
The security code will be set.
"RE-ENTER" will appear in the display for one second, asking
you to enter the code once again for confirmation. When
— 26 —
"CODE" appears in the display, you can start inputting the code.
Touch Sensor Tone
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
6 Press the Preset button and input the security code again.
7 Hold down the DISP button again for three seconds or more.
"APPROVED" will appear in the display, with the code security
function turning on. From this point on, if the unit is
disconnected from the battery, the security code must be
entered the first time that the unit's power is turned on.
"ENTER" and "CODE" will appear in the display, asking you to
input the code.
Display and setting:
"Beep ON" : Beep setting is on. (Default setting)
"Beep OFF" : Beep setting is off.
NOTE
The beep sound is not output from the preout jacks.
NOTE
If you input an incorrect security code, the code setting mode
will be cancelled automatically. Follow the steps from 3 to 7
above again.
If you press the RESET button or remove the battery:
The first time you turn the unit on again, "CODE" will appear in
the display, asking you to input the security code.
Repeat steps 6 and 7 above, and input the security code.
You can start operating the unit again when "APPROVED"
appears in the display.
Manual Time Adjustment
Adjust the time manually.
NOTE
This adjustment is available only when the automatic time
adjustment is set to off. (page 28)
NOTE
Display and setting:
If you enter the wrong code, “Waiting” is displayed and you
cannot make further input of the code for a fixed interval (see
table below), which grows longer each time you enter the wrong
code.
1 Select the display "Clock Adjust" during the selecting function
in the menu system.
2 Hold down either the 4 or ¢ button for one second or
more to enter the Manual time adjustment mode.
The time display will blink.
When "CODE" is displayed, you can make input again.
Number of wrong
inputs
Interval until next input
is allowed
3 • Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
1
2
3
4
-
5 minutes
1 hour
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
24 hours
4 Press the MENU button to end the Manual Time Adjustment
The number of wrong inputs is displayed.
mode.
Exiting the Manual Time Adjustment mode would start the
clock counting.
— 27 —
Menu settings
"Graphic ON" : The display will turn on by using the whole part
of the display. (Default setting)
"Graphic OFF" : The display will turn on by using only the upper
part of the display and the IN indicator .
Automatic Time Adjustment
With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment
function is turned off.
Display and setting:
"SYNC ON" : Automatic time adjustment (Default setting)
"SYNC OFF" : Manual time adjustment
Function of the KRC-V679R
Variable Illumination Colour Setting
You can set the display to a desired colour.
Adjusting Time Automatically:
Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
NOTE
Display and setting:
The time is not adjusted when the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.
1 Select the display "Color" during the selecting function in the
menu mode.
2 To set a colour manually:
Hold down on the 4 or ¢ button.
Pressing the ¢ button advances the colour, and pressing the
4 button reverses it.
When the desirable colour is appeared, release the button.
3 To make the popular colours appear:
Selectable Illumination
You can switch the colour of the button illumination between
green and red.
Press the preset button(#1-4) for the desired color.
The buttons #1-4 are preset for the following four colours:
#1: White
#2: Red
#3: Blue
Display and setting:
“Button Green” : The colour of the illumination is green.
“Button Red” : The colour of the illumination is red.
#4: Blue Green
4 To switch colours depending on the situation:
(Situational Mode)
Each time you press the #6 button, the mode switches as
follows:
Switching Graphic Display
This function allows you to turn off the lower part of the
display if there is too much information in the display.
Display and setting:
— 28 —
"Contrast 0" – "Contrast 10"
▼
NOTE
Scan Mode
▼
The initial setting value is "5".
SRC Mode
(Changing colours depending on the source being played)
▼
Time Mode
(Colour changes every six hours)
▼
Situational Mode off
Dimmer
You can dim the display.
When the Situational Mode is off, the original colour setting
resumes.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
5 To finely adjust blue: (Blue Adjust Mode)
Press the #3 button for two seconds or more to enter the
blue adjust mode.
Display and setting:
The 4 and ¢ buttons are used to adjust the blue color
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
tones, respectively.
Press the #3 button to end the blue adjust mode.
6 To store the colour setting in the memory:
(colour preset memory)
After adjusting the illumi colours, press the #5 button for two
seconds to store the colour setting in the memory.
Pressing the #5 button again recalls the stored colours from
the memory.
Function of the KRC-V679R/KRC-679R
External Amp Control
Adjust the bass boost level of the external amplifier using the
NOTE
main unit.
The Blue Adjust mode setting cannot be stored in memory.
Display and setting:
7 Press the MENU button to end the Variable Illumination Colour
“AMP Bass FLT” : Bass boost level is flat. (Default setting)
“AMP Bass +6” : Bass boost level is low (+6dB).
“AMP Bass +12” : Bass boost level is high (+12dB).
Setting mode.
NOTE
As of December 2000, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
Contrast Adjustment
This adjustment permits easy viewing of the display.
Display and setting:
— 29 —
Menu settings
Selecting Tuning Mode <In Tuner mode>
News Bulletin Function with PTY News Timeout
Setting
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The "AUTO 1" indicator lights up
when auto seek tuning is selected, and the "AUTO 2" indicator
lights when preset station seek tuning is selected.
You can arrange to have news bulletins interrupt your current
listening source, including other radio stations. When the
News Bulletin function is on, the PTY News Timeout setting
allows you to set the interval during which further news
interruption cannot take place. You can adjust the PTY news
interruption period from 10 to 90 minutes for each journey.
Display and setting:
"Auto 1" : Auto seek tuning mode (Default setting)
"Auto 2" : Preset station seek tuning mode
"Manual" : Manual tuning mode
Display and setting:
“News OFF” (Default setting) , “News 00min” - “News
90min”
(min= minutes)
: When you select the news interruption timeout interval, the
News function turns on and the NEWS indicator lights up.
When a news bulletin is received, "NEWS" will be displayed
and reception will begin at the preset volume.
Auto Memory Entry <In Tuner mode>
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to 6 frequencies can be stored this way.
NOTE
• If you choose the "20min" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is
received.
• This function is only available if the desired station sends PTY-
code for news bulletin or belongs to <Enhanced Other
Network>-Network sending PTY-code for news bulletin.
• If you turn on the news bulletin function in the MW/LW band,
the band is switched automatically to the FM band.
However, the MW/LW band is not returned to when you turn
off the function.
Display and setting:
1 Select the display "Auto-Memory" during the selecting function
in the menu system.
2 Hold down either the 4 or ¢ button for two seconds or
more to start auto memory function.
The numbers of the preset station buttons showed in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
NOTE
Local Seek Function <In Tuner mode>
• When the AF function is turned on whilst auto memory entry
takes place, only RDS stations (i.e., stations with RDS
capability) are stored. RDS stations that have been preset for
FM1 cannot also be preset in FM2 or FM3.
• When the local seek function is turned whilst auto memory
entry takes place, stations with poor reception are not stored.
• When the Traffic Information function is on, only the local traffic
With the local seek function turned on, auto seek tuning skips
stations with relatively poor reception.
Display and setting:
"Local.S ON" : The local seek function is on.
"Local.S OFF" : The local seek function is off. (Default setting)
— 30 —
information station frequency will be stored.
Restricting RDS Region (Region Restrict Function)
Cancelling Auto Memory Entry During Its Operation:
Press the 4/¢ button whilst auto memory entry is taking
place to stop the process.
You can choose whether or not to restrict the RDS channels,
received with the AF function for a particular network, to a
specific region. When the Region Restrict Function is on, the
region is restricted.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
Display and setting:
"Regional ON" : The Region Restrict Function is on. (Default
setting)
"Regional OFF" : The Region Restrict Function is off.
NOTE
Sometimes stations in the same network broadcast different
programmes or use different programme service names.
AF (Alternative Frequency) Function
When poor reception is experienced, automatically switch to
another frequency broadcasting the same programme in the
same RDS network with better reception.
The RDS indicator lights up when the AF function is turned on.
Auto TP Seek Function
Display and setting:
When the TI function is on and poor reception conditions are
experienced when listening to a traffic information station,
another traffic information station with better reception will be
searched for automatically. This function is on, when unit is
first powered on.
"AF ON" : The AF function is on. (Default setting)
"AF OFF" : The AF function is off.
NOTE
When no other stations with stronger reception are available for
the same programme in the RDS network, you may hear the
incoming broadcast in bits and snatches. Turn off the AF function
in such a case.
Display and setting:
"ATPS ON" : The Auto TP Seek Function is on.
If the traffic information station you are tuned to
experiences poor reception, this function
automatically seeks another TP station. (Default
setting)
"ATPS OFF" : The Auto TP Seek Function is off.
— 31 —
Menu settings
The Power OFF Timer function is enabled only after the security
code (page 26) is set up.
Monaural Reception
<In FM reception of Tuner mode>
When poor stereo reception is experienced, this function will
reduce noise and improve listening conditions.
Display and setting:
“MONO ON” : The monaural reception is on.
“MONO OFF” : The monaural reception is off. (Default setting)
Text Scroll <In FM or External disc control mode>
This function permits the CD text, MD title, and Radio tex to be
scrolled and the entire text to be displayed. Switching between
manual scrolling and automatic scrolling is permitted.
Display and setting:
"Scroll Auto" : Automatic scrolling
“Scroll MANU/Scroll Manual” : Manual scrolling (Default
setting)
Power OFF Timer
Set the time for the OFF Timer function activated when you
selected Standby mode.
If the predefined time elapses, this unit's power is
automatically turned off.
Display and setting:
“OFF – – – –” : Power OFF Timer function is cancelled.
“OFF 20min” : Unit's power goes OFF after 20 minutes.
(Default setting)
“OFF 40min” : Unit's power goes OFF after 40 minutes.
“OFF 60min” : Unit's power goes OFF after 60 minutes.
NOTE
— 32 —
Accessories
2CAUTION
• If your car is not prepared for this special connection-system,
consult your Kenwood dealer.
External view
Number of items
• Only use antenna conversion adapters (ISO-JASO) when the
antenna cord has an ISO plug.
• Make sure that all cable connections are securely made by
inserting jacks until they lock completely.
1
..........................................1
• If your vehicle's ignition does not have an ACC position, or if
the ignition cable is connected to a power source with constant
voltage such as a battery cable, the power will not be linked
with the ignition (i.e., it will not turn on and off along with the
ignition). If you want to link the unit's power with the ignition,
connect the ignition cable to a power source that can be turned
on and off with the ignition key.
• If the fuse blows, first make sure that the cables have not
caused a short circuit, then replace the old fuse with one with
the same rating.
• Do not let unconnected cables or terminals touch metal on the
car or anything else conducting electricity. To prevent short
circuits, also do not remove the caps on the ends of the
unconnected cables or the terminals.
• Connect the speaker cables correctly to the terminals to which
they correspond. The unit may receive damage or fail to work if
you share the - cables and/or ground them to any metal part
in the car.
..........................................2
..........................................1
2
3
4
..........................................1
2CAUTION
The use of any accessories except for those provided might
result in damage to the unit. Make sure only to use the
accessories shipped with the unit, as shown above.
• After the unit is installed, check whether the brake lamps,
indicators, wipers, etc. on the car are working properly.
• Insulate unconnected cables with vinyl tape or other similar
material.
• Some disc changers need conversion cables for connection.
See the section on "Safety Precautions" for details.
• If the console has a lid, make sure to install the unit so that the
faceplate does not hit the lid when closing and opening.
Installation Procedure
1. To prevent short circuits, remove the key from the ignition and
disconnect the - terminal of the battery.
2. Make the proper input and output cable connections for each
unit.
3. Connect the cable on the wiring harness.
4. Take Connector B on the wiring harness and connect it to the
speaker connector in your vehicle.
5. Take Connector A on the wiring harness and connect it to the
external power connector on your vehicle.
6. Connect the wiring harness connector to the unit.
7. Install the unit in your car.
8. Reconnect the - terminal of the battery.
9. Press the reset button.
— 33 —
Connecting Cables to Terminals
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Antenna Cord (ISO)
Connector Function Guide
FM/AM
antenna input
Pin Numbers for
Cable Colour
Functions
ISO Connectors
Rear left output (White)
Rear right output (Red)
Front left output (White)
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Yellow
Blue/White
Orange/White Dimmer
Red
Battery
Power Control
Front right output (Red)
To KENWOOD disc changer/
Ignition (ACC)
Earth (Ground)
Connection
DAB control input/
KPA-SD100/KPA-HD100/KPA-
SS100
Black
Speaker
Connector
Fuse(10A)
NOTE
To connect these leads, refer to the
relevant instruction manuals.
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
Wiring harness
(Accessory1)
External amplifier control cable
(Pink / Black)
Green/Black
(KRC-V679R/ KRC-679R only)
To "EXT.AMP.CONT." terminal of the
amplifier having the external amp
control function.
EXT.CONT.
Battery cable (Yellow)
TEL mute cable (Brown)
Ignition cable (Red)
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
TEL MUTE
NOTE
To connect the KENWOOD navigation
system, consult your navigation manual.
A–7 Pin (Red)
Power control/ Motor antenna
control cable (Blue/White)
P.CONT.OUT
Connect either to the power control
terminal when using the optional
power amplifier, or to the antenna
control terminal in the vehicle.
A–4 Pin (Yellow)
Connector A
ANT.CONT.
8
7
6
5
4
3
2
1
NOTE
If no connections are
made, do not let the cable
come out from the tab.
8
7
6
5
4
3
2
1
Connector B
— 34 —
Connecting Cables to Terminals
Installation
▼
Installation
2WARNING
Connecting the ISO Connector (see p.34)
The pin arrangement for the ISO connectors depends on the
type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
The default connection for the wiring harness is described in 1
below. If the ISO connector pins are set as described in 2 or 3,
make the connection as illustrated.
Firewall or metal support
Screw (M4X8)
(commercially
available)
1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector
is linked with the ignition, and the A-4 pin (yellow) is connected to
the constant power supply.
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
Bend the tabs of the
mounting sleeve
with a screwdriver or
similar utensil and
attach it in place.
Battery cable (Yellow)
A–4 Pin (Yellow)
Self-tapping
screw
(commercially
available)
Metal mounting
strap
(commercially
available)
2 The A-7 pin (red) of the vehicle's ISO connector is connected to
the constant power supply, and the A-4 pin (yellow) is linked to
the ignition.
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
NOTE
Battery cable (Yellow)
A–4 Pin (Yellow)
Make sure that the unit is installed securely in place. If the unit
is unstable, it may malfunction (eg, the sound may skip).
3 The A-4 pin (yellow) of the vehicle's ISO connector is not
connected to anything, while the A-7 pin (red) is connected to the
constant power supply (or both the A-7 (red) and A-4 (yellow) pins
are connected to the constant power supply).
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
Battery cable (Yellow)
A–4 Pin (Yellow)
NOTE
When the connection is made as in 3 above, the unit's power
will not be linked to the ignition key. For that reason, always
make sure to turn off the unit's power when the ignition is
turned off. To link the unit's power to the ignition, connect the
ignition cable (ACC...red) to a power source that can be turned
on and off with the ignition key.
— 35 —
Installation
▼
▼
Removing the hard rubber frame
Removing the Unit
1
Refer to the section “Removing the hard rubber frame (P. 36)”
and then remove the hard rubber frame.
1
Refer to the section “Theft deterrent faceplate (P. 10)” and
then remove the faceplate.
2
3
Remove the Hex-head screw with integral washer (M4×8) on
2
Engage the catch pins on the removal tool and remove the
two locks on the upper level.
Push upward the frame and pull it forward as shown in the
figure.
the back panel.
Insert the two removal tools deeply into the slots on each
side, as shown.
Screw (M4X8)
(commercially
available)
Catch facing up
Lock
Catch
Accessory2
Removal tool
Accessory2
Removal tool
4
Push upward the removal
tool toward the top, and
pull out the unit halfway
whilst pressing towards the
inside.
3
When the upper level is removed, remove the lower two
locations.
2CAUTION
Be careful to avoid injury from the catch pins on the removal
tool.
5
Pull the unit all the way out
with your hands, being
careful not to drop it.
NOTE
The frame can be removed from the bottom side in the same
manner.
— 36 —
Installation
▼
Locking the faceplate to the unit
If you want to lock the faceplate to the unit so that it does not
fall off, follow the directions below.
1
2
Refer to the function "Theft deterrent faceplate" (page 10) and
remove the faceplate.
Insert the provided screw into the hole at the centre of the
bottom side of the faceplate which you have removed from
the unit.
Accessory4
3
4
Push back the bottom of the faceplate bracket unit it locks.
Refer to the section "Theft deterrent faceplate (page 10)" and
then reattaching the faceplate.
2CAUTION
Never insert the taptite screws (ø2 × 4 mm) in any other screw
holes than the one specified. If you insert it in another hole, it
will contract and may cause damage to the mechanical parts
inside the unit.
— 37 —
Troubleshooting Guide
What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
Before calling service, first check the following table for possible problems.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The power does not turn on.
The fuse has blown.
After checking for short circuits in the cables, replace
the fuse with one having the same rating.
No ACC position on vehicle ignition.
Connect the same cable to the ignition as the battery cable.
If you have selected Standby
mode, the power will go OFF
automatically.
The Power Off Timer function has been activated.
If you do not want the power to go OFF automatically,
cancel the Power Off Timer function.
Nothing happens when the
buttons are pressed.
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see page 4).
Radio reception is poor.
The car antenna is not extended.
Pull out the antenna all the way.
The antenna control cable is not connected.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The memory is erased when
the ignition is turned off.
The battery cable has not been connected to the proper
terminal.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The ignition and battery cable are incorrectly connected.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The TEL mute function does
not work.
The TEL mute cable is not connected properly.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The TEL mute function turns
on even though the TEL mute
cable is not connected.
The TEL mute cable is touching a metal part of the car.
Pull the TEL mute cable away from the metal part of
the car.
Free switching of the sound
quality.
The system Q function is set on Scan mode.
The system Q function is set on Scan mode.
Refer to the “System Q” page and switch it to a
function other than Scan mode. (see p. 7).
Audio control setting cannot be
achieved.
Refer to the “System Q” page and switch it to a
function other than Scan mode.(see p. 7).
— 38 —
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
SOLUTION
No sound can be heard, or the
volume is low.
The Attenuator function is turned on.
Turn off the Attenuator function.
The fader and/or balance settings are set all the way to
one side.
Reset the fader and/or balance settings.
The input/output cables or wiring harness are connected
incorrectly.
Reconnect the input/output cables and/or the wiring
harness correctly. See the section on "Connecting
Cables to Terminals".
The cassette tape is bad.
Try playing another cassette tape. If no problem is
experienced, the first tape was bad.
The values of Volume offset are low.
Increase the values of Volume offset. (see p. 8)
Press the Eject button.
The tape does not go in. /
No sound can be heard even
though the tape display is made.
The car ignition was turned off during tape eject; or the
tape was pulled out during loading, switching the mode
to tape mode even though no tape is in.
The tape head is dirty.
Clean the tape head, referring to the section on
"Cleaning the tape head" (see page 4).
The sound quality is poor or
distorted.
A speaker cable may be pinched by a screw in the car.
The speakers are not wired correctly.
Check the speaker wiring.
Reconnect the speaker cables so that each output
terminal is connected to a different speaker.
Can’t remove tape.
The cause is that more than 10 minutes has elapsed
since the vehicle ACC switch was turned OFF.
The tape can only be removed within 10 minutes of the
ACC switch being turned OFF. If more than 10 minutes
has elapsed, turn the ACC switch ON again and press
the Eject button.
— 39 —
Troubleshooting Guide
External disc control mode
PROBLEM
POSSIBLE CAUSE
SOLUTION
The disc control mode cannot
be selected.
No cable has been connected to the disc changer input
terminal on the unit.
Connect the cable to the disc changer input terminal on
the unit.
The specified disc does not
play, but another one plays
instead.
The specified CD is very dirty.
Clean the CD.
The CD is upside-down.
Load the CD with the labelled side up.
The disc is loaded in a different slot from that specified.
Eject the disc magazine and check the number for the
specified disc.
The disc is severely scratched.
Something is touching the disc changer.
The CD is scratched or dirty.
Try another disc instead.
The sound skips.
Remove whatever is touching it.
If skipping happens at the same place when the car is
stopped, something is wrong with the CD. Clean the CD.
The display shows that the
changer is being played, but no
sound can be heard.
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see page 4).
The specified track does not
play.
Random play or magazine random play has been
selected.
Turn off the random play or magazine random play
function.
Track repeat, disc repeat, track
scan, random play, and
magazine random play start by
themselves.
The setting is not cancelled.
The settings for these functions remain on until the
setting to off or the disc ejected, even if the power is
turned off or the source changed.
Cannot play CD-R or CD-RW
Finalization processing is not being conducted for CD-
R/CD-RW.
Conduct finalization processing with CD recorder.
A non-compatible CD changer is being used to play the
CD-R/CD-RW.
Use a CD changer compatible with CD-R/CD-RW to play.
If the following situations, consult your nearest service centre:
• Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is
entered when switching modes.
— 40 —
Troubleshooting Guide
The following messages are displayed when certain problems are occurring in your system. Take the
recommended actions.
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Eject
]
Load the disc magazine properly.
No CD in the unit.
]
Insert the CD.
No disc has been loaded in the disc magazine.
No Disc
]
Load a disc into the disc magazine.
No disc has been loaded in the disc magazine.
TOC Error
]
Load a disc into the disc magazine.
The CD is very dirty. The CD is upside-down. The CD is scratched a lot.
]
Clean the CD and load it correctly.
Nothing has been recorded on the MD.
Blank Disc
No Tr Disc
NO PANEL
No tracks are recorded on the MD, although it has a title.
The faceplate of the slave unit being connected to this unit has been removed.
]
Replace it.
The unit is malfunctioning for some reason.
E-77
]
Press the reset button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre.
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
Mecha Error
]
Check the disc magazine. And then, press the reset button on the unit.
If the "Mecha Error" code does not disappear, consult your nearest service center.
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
Hold Error
IN
]
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F),
the disc starts playing again.
If this indicator continues blinking, it is possible that the tape has become jammed or tangled.
]
Contact the Kenwood dealer if the tape cassette cannot be ejected.
— 41 —
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB) .................................0.7 µV/75 Ω
Quieting Sensitivity (S/N = 46dB) ..............................1.6 µV/75 Ω
Frequency response ( 3 dB).................................30 Hz – 15 kHz
Signal to Noise ratio (MONO)..............................................65 dB
Selectivity (DIN) ( 400 kHz)............................................. ≥ 80 dB
Stereo separation (1 kHz) ....................................................35 dB
Maximum output power.................................................47 W × 4
Output power (DIN 45324, +B=14.4V)...........................29 W × 4
Tone action
Bass : ..........................................................100 Hz 10 dB
Middle : .........................................................1 kHz 10 dB
Treble :.........................................................10 kHz 10 dB
Preout level / Load (during disc play) .................1800 mV / 10 kΩ
Preout impedance............................................................≤ 600 Ω
MW tuner section
Frequency range (9 kHz Space).....................531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB) ...........................................25 µV
General
Operating voltage (11 – 16V allowable) ..............................14.4 V
Current consumption.............................................................10 A
Installation Size (W x H x D) ..........................182 x 53 x 158 mm
Weight ................................................................................1.5 kg
LW tuner section
Frequency range .............................................153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB) ...........................................45 µV
Cassette player section
Tape Speed...............................................................4.76 cm/sec.
Wow & Flutter (WRMS) ....................................................0.08 %
Frequency response ( 3 dB) (70 µs)......................30 Hz – 20 kHz
Separation (1 kHz) ...............................................................43 dB
Signal to Noise ratio
Dolby NR OFF............................................................57 dB
Dolby B NR ON..........................................................65 dB
— 42 —
|