CD-RECEIVER
KDC-MP928
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD dealer for information or service on the product.
Model KDC-MP928 Serial number
US Residence Only
Register Online
Register your Kenwood product at
© B64-3149-00/00 (KW)
Menu system
Menu System
Security Code
44
Basic Operations of remote control 53
Accessories/ Installation Procedure 56
Touch Sensor Tone
Manual Clock Adjustment
Date Adjustment
Date Mode
Synchronize Clock
DSI (Disabled System Indicator)
Selectable Illumination
Dimmer
Contrast Adjustment
Display-reversing Setting
Built-in Amp Setting
G-Counter Level set
G-Analyzer Reset
Connecting Wires to Terminals
Installation
57
58
60
61
64
Removing the Unit
Troubleshooting Guide
Specifications
G-Analyzer Calibration setup
G-Analyzer Stop Watch
Dual Zone System Setting
Traffic Information
CRSC (Clean Reception System Circuit)
Receive mode Setting
SIRIUS ID (ESN) display
Auxiliary Input Display Setting & Station/Disc
Naming
Text Scroll
Built-in Auxiliary input Setting
CD Read Setting
Picture downloading
Voice Index
ACDrive firmware version display
Unique ID display
Demonstration mode Setting
Menu Added for DAB
WOW, SRS and
symbol are trademarks
of SRS Labs, Inc.
WOW technology is incorporated under
license from SRS Labs, Inc.
The "AAC" logo is trademark of Dolby
Laboratories.
English
|
3
Safety precautions
About CD players/disc changers
connected to this unit
KENWOOD disc changers/ CD players released in
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models of disc changers/
CD players.
2WARNING
To prevent injury or fire, take the
following precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools)
inside the unit.
Note that any KENWOOD disc changers/ CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected to this unit.
Connecting unsupported disc changers/CD players
to this unit may result in damage.
Set the "O-N" Switch to the "N" position for the
applicable KENWOOD disc changers/ CD players.
The functions you can use and the information
that can be displayed may differ depending on the
models being connected.
• Never watch the G-Analyzer Display screen when
you are driving. Otherwise, a car accident may
result.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
•
You can damage both your unit and the CD changer if
you connect them incorrectly.
• Do not place the faceplate or the faceplate case in
areas exposed to direct sunlight, excessive heat or
humidity. Also avoid places with too much dust or
the possibility of water splashing.
LX-bus connection
• The DAB tuner and the HD Radio tuner unit must
be connected one at a time.
• To prevent deterioration, do not touch the
terminals of the unit or faceplate with your
fingers.
• Do not subject the faceplate to excessive shock,
as it is a piece of precision equipment.
• When replacing a fuse, only use a new fuse with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so will
cause damage or breakdown.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condesnation on the lens may not allow CDs to
play. In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit still
does not operate normally after a while, consult
your Kenwood dealer.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
Attach the panel while you are on the
vehicle
The panel lock arm appears when the panel is
removed. Therefore, the panel must be attached
while the electrical system of the car is operating.
Do Not Load 8 cm (3 in.) CDs in the CD
slot
If you try to load a 8 cm (3 in.) CD with its adapter
into the unit, the adapter might separate from the
CD and damage the unit.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.
|
4
English
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• If the unit fails to operate properly, press the Reset
button to restore factory settings.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 52).
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
About ODD (Offset Dual Differential) D/A
System
You can enjoy high quality sound play when
playing music CDs with the ODD D/A System
enabled. ODD D/A System has two built-in D/A
converters and each D/A converter processes D/A
conversion seperately on the front left and right
channel. Since digital processing is performed for
each channel seperately, noise occurance from
interference between channels is completely
suppressed and the seperation of audio sound
output from two channels is distinguished and
clear. Also, the ODD/A System produces the data
by which the sound data is offset on the minus side
and converts the two signals (original and offset
data) to the analog signal, which has less noise and
distortion, by the synthetic process.
Reset button
• We recommend the use of <Security Code>
(page 44) to prevent theft.
• The characters conforming to ISO 8859-1
character set can be displayed.
• There are places in this manual where lit
indicators are described; however, the only time
an indicator will light is in the following settings.
When Indicator is selected as mentioned in <Text
Display Switching> (page 22)
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
However, ODD D/A System will be disabled if the
following settings are selected.
- When "2ZONE" of <Audio Setup> (page 11) is
"ON".
- When <Bypass Control> (page 16) is "Bypass".
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
•
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
English
|
5
Notes
2Warning
About "Media Manager" of PC application
• "Media Manager" is recorded in the CD-ROM
attached to this unit.
• Refer to the attached installation manual for the
installation method of "Media Manager".
• Refer to the user’s manual recorded in the
installation CD-ROM and Help of "Media Manager"
for the operation method of "Media Manager".
• The unit can play CD (hereafter called "ACDrive
disc") created by "Media Manager".
2CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
KENWOOD CORPORATION
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
• Refer to the following site for the updated
information of "Media Manager".
TOKYO, JAPAN
• Contact Kenwood for the function and operation
of the "Media Manager".
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
• "Media Manager" is a product of PhatNoise.
Location : Bottom Panel
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly approved
in the instruction manual. The user could lose
the authority to operate this equipment if an
unauthorized change or modification is made.
NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment may cause harmful
interference to radio communications, if it is
not installed and used in accordance with the
instructions. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
|
6
English
About CDs
Handling CDs
• Do not touch the recording surface of the CD.
Removing CDs
When removing CDs from this unit pull them out
horizontally.
CDs that cannot be used
• CDs that are nott round cannot be used.
• CD-R and CD-RW are easier to damage than a
normal music CD. Use a CD-R or a CD-RW after
reading the caution items on the package etc.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
When using a new CD
If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen, etc.
.
This unit may not correctly play discs which do
not have the mark.
• You cannot play A CD-R or CD-RW that has not
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-
R/CD-RW recorder instruction manual.)
Burrs
CD storage
Burrs
• Do not place CDs in direct sunlight (On the seat
or dashboard etc.) or where the temperature is
high.
• Store CDs in their cases.
CD accessories
Do not use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
English
|
7
About AAC, MP3 and WMA
The playable AAC/MP3/WMA file (hereafter called
Audio file) and the media format has the following
limitation. The Audio file, which is not comforming
to the specification, may not play normally, or the
file and folder names may not display correctly.
The maximum number of characters for
display
File/Folder name: 128 characters
MP3 ID3 Tag/ WMA Contents property
: 30 characters
AAC song information: 60 characters
•
•
Attach the correct extension for the Audio file (AAC:
".M4A", MP3: ".MP3", WMA: ".WMA")
Do not attach the extensions to files other than the
Audio file. If the extension is attached, the file, which is
not the Audio file, will play and outputs a loud noise,
causing damage to the speaker.
•
•
File/Folder name is the number of the characters
including the extensions
AAC ID3 Tag cannot be displayed.
Limitation of structure for the file and the
folder
• Maximum number of directory levels: 8
• Maximum number of folders: 100
• Maximum number of files per folder: 4096
•
The files with copy protection cannot be played.
Playable AAC file
• ".m4a" file encoded by AAC-LC format.
Refer to http://www.kenwood.mediamanager.jp
for the details.
Playing order of the Audio file
The Audio file plays in the order which is written by
writing software. You may be able to set the playing
order by writing the play sequence numbers such
as "01" to "99" at the beginning of the file name.
Playable MP3 file
• MPEG 1/2 Audio Layer 3 file
• Transfer bit rate: 8-320 kbps
• Sampling frequency
Example
: 16, 22.05, 24, 32, 44.1, 48 kHz
0
¡
: F
Folder
CD
(1)
Playable WMA file
:
A
u
d
i
o
file
• The file in accordance with Windows Media Audio
(Except for the file for Windows Media Player 9 or
after which applies the new functions)
¡!
2
¡"
3
• Transfer bit rate: 48-192 kbps
• Sampling frequency: 32, 44.1, 48 kHz
¡#
¡$
Playable media
• CD-ROM, CD-R, CD-RW
4
¡%
•
•
CD-RW discs which are quick formatted by the writing
software cannot be used.
When recording to the maximum media capacity at
once, the writing software is set to "Disc at once".
• Playing order
Playing order after ¡! play.
➡ ¡", ¡#, ¡$, ¡%...
• File search
Playable disc format
Forward file search during ¡# play.
Push the Control knob toward [¢] ➡ ¡$
• Folder search
Forward folder search during ¡" play.
Push the Control knob toward [FM] ➡ 3, 4...
• ISO 9660 Level 1/2
• Joliet
• Romeo
• Long file name.
• Folder select
When the selection is set to directory 4, and you
want to skip to the folder 2 at the same level.
Push the Control knob towards [4] ➡ 2
When the selection is set to directory 3, moves
the level up by folder select.
Push the Control knob towards [FM] ➡ 2
|
8
English
Notes on Multi-function System
What is the Multi-function System?
Multi-function System shows the Multi-function
display, allowing you to select various functions and
settings.
Real operational example of the Multi-
function System
Example: Turning ON/OFF the Random Play during
CD play.
Functions available for the current source are
displayed.
1. Show the Multi-function display of the Random
Play.
Press the [NEXT] button.
Operational
1 Press the [NEXT] button to Show the Multi-
function display
Each time you press the [NEXT] button, the
Multi-function display is switched among the
Source Function display, System Function display,
and blank display.
Scan
Random
Repeat
2. Select the "Random" item
Rotate the [VOL] knob.
Example: Multi-function display for CD source
S.F.C
Scan
Random
Repeat
Scan
Random
Repeat
S.M.S
EQ
SRS WOW
DSP
Display
3. Turn ON/OFF the Random Play.
Press the [VOL] knob.
Each time you press the [VOL] knob under the
"Random" function display the Random Play is
turned ON/OFF.
•
The operation ends automatically if you do not operate
within 10 seconds:
Scan
Random
Repeat
2 Turn the [VOL] knob to highlight the item you
want to select.
3 Press the [VOL] knob to select the highlighted
item.
•
In the body text, steps 2 and 3 are described as follows:
Turn the [VOL] knob to select "Random".
Press the [VOL] knob.
•
•
In the body text, steps 2 and 3 are described as follows:
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
During Multi-function System mode, the [VOL] knob or
Control knob flashes to indicate that it is available for
multi-function setting.
Returning to the Previous Display
Select "Return" on the Multi-function display, or
press the [NEXT] button.
English
|
9
General features
NEXT/MENU
ATT
ANG
VOL
AUTO
SRC
Control knob
Release button
S.F.C
Tuner
S.M.S
EQ
FM1-1ch 107.7 MHz
SRS WOW
DSP
01-Jan-05 Sat
Display
ATT indicator
Power
•
The DAB tuner and the HD Radio tuner must be
connected one at a time.
Turning ON the Power
Press the [SRC] button.
Turning OFF the Power
Press the [SRC] button for at least 1 second.
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Selecting the Source
Press the [SRC] button.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Source required
SIRIUS tuner (Optional accessory)
DAB (Optional accessory)
Display
"SIRIUS"
"DAB"
Tuner or HD Radio (Optional accessory) "TUNER" or "HD Radio"
Attenuator
CD
"Compact Disc"
"CD Changer"
"AUX"
Turning the volume down quickly.
External disc (Optional accessory)
Auxiliary input
Press the [ATT] button.
Auxiliary input (Optional accessory)
Standby (Illumination only mode)
"AUX EXT"
"STANDBY"
Each time you press the button is pressed, the
Attenuator turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator
blinks.
|
10
English
Audio Control
4 Setup the Audio item
Turn the [VOL] knob.
1 Select the source to adjust
Press the [SRC] button.
Adjustment Item Display
Range
Volume offset
Dual Zone System
"VOLUME OFFSET" –8 — 0
"2ZONE" ON/OFF
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
•
•
Volume offset: Sets each source’s volume as a
difference from the basic volume.
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by <Dual Zone
System Setting> (page 48).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [VOL] knob.
- Adjust the volume of Rear channel by <Audio
Control> (page 11).
- The Audio Control has no effect on sub source.
You can use the Dual Zone System with the Auxiliary
input sources listed below.
4 Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item
Display
"REAR VOLUME" 0 — 35
Range
Rear Volume *1
Subwoofer level*2*3 "SW LEVEL"
–15 — +15
Balance
Fader*3
"BALANCE"
"FADER"
Left 15 — Right 15
Rear 15 — Front 15
•
•
Exit Audio Control mode
- Internal auxiliary input
You can use the Dual Zone System only when you
have set the rear speaker to any mode other than
"None" in the <Sound Management system> (page
13).
When the "2ZONE" is ON, ignore the following setups.
- <Sound Field Control> (page 12)
- <Sound Management system> (page 13)
- <Equalizer Control> (page 14)
- <WOW Control> (page 15)
•
•
*1 You can control this item when "2ZONE" of <Audio
Setup> (page 11) is set to "ON".
*2 You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
13) is set to any item other than "None".
•
•
•
*2 You can control this item when <Subwoofer
Output> (page 12) is set to "SUBWOOFER ON".
*3 You can control this item when "2ZONE" of <Audio
Setup> (page 11) is set to "OFF".
- <Bypass Control> (page 16)
ODD D/A System is not effective when the "2ZONE" is
ON.
•
5 Exit Audio Control mode
Press the [AUTO] or [NEXT] button.
5 Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Audio Setup
Setting the Sound system, such as Volume offset
and Dual Zone.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
English
|
11
General features
1
2
3
Subwoofer Output
Sound Field control item
"X'Over" "HPF Front"
"fc" Front High Pass Filter Frequency
"SLP" Front High Pass Filter Slope
Turning the Subwoofer output ON or OFF.
Hold down on [AM] of the Control knob for at
least 1 second.
"HPF Rear"*¹
"fc" Rear High Pass Filter Frequency
"SLP" Rear High Pass Filter Slope
"LPF
SubWoofer"*²
Each time you press the button, Subwoofer
output switches ON and OFF.
When it is ON, "SUBWOOFER ON" is displayed.
"fc" Subwoofer Low Pass Filter Frequency
"SLP" Subwoofer Low Pass Filter Slope
"Phase" Subwoofer Low Pass Filter Phase
"DTA"
"DTA Front"
DTA Front
"DTA Rear"*¹
"DTA
SubWoofer"*²
DTA Rear
DTA Subwoofer
•
•
You can control this function when "2ZONE" of
<Audio Setup> (page 11) is set to "OFF".
You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
13) is set to any item other than "None".
"POSI"
"Preset"
Position Setting
Preset value storage/recalling
•
"Preset": You can store an adjusted sound control
value by selecting "Memory". Refer to
<Memory mode> (page 16). Also, you
can recall it by selecting "Recall". Refer to
<Memory Recall mode> (page 16).
Sound Field Control
1 Select the source to adjust
Press the [SRC] button.
•
•
You can adjust "SubWoofer" when <Subwoofer
Output> (page 12) is set to "SUBWOOFER ON".
X'Over (Crossover Network Setup)
You can manually set a crossover frequency for the
speakers.
DTA (Digital Time Alignment)
Manually set the sound output timing of each
channel.
*1 You can control this item when Speaker Select Rear
of <Sound Management system> (page 13) is set to
any item other than "None".
*2 You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
13) is set to any item other than "None".
2 Show the Multi-function display
Press the [NEXT] button repeatedly until
"S.F.C" appears.
Refer to <Notes on Multi-function System> (page
9).
•
•
•
3 Enter Sound Field Control mode
Turn the [VOL] knob to select "S.F.C".
Press the [VOL] knob.
•
•
To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 13).
When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "S.F.C".
5 Adjust the Sound Field Control item
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
4 Select the Sound Field Control item to
adjust
1 Turn the [VOL] knob to select the item you
want to select. Press the [VOL] knob.
2 Press the Control knob.
Sound Field Control Item
Range
Front High Pass Filter Frequency/
Rear High Pass Filter Frequency
Through/40/60/80/100/120/
150/180/220 (Hz)
3 Push the Control knob towards [FM] or
[AM].
Front High Pass Filter Slope/
Rear High Pass Filter Slope/
Subwoofer Low Pass Filter Slope
-12/-18 dB/Oct
Subwoofer Low Pass Filter Frequency
40/60/80/100/120/150/180/
220 (Hz)/Through
Subwoofer Low Pass Filter Phase
Normal/ Reverse
|
12
English
DTA Front/DTA Rear
DTA Subwoofer
0 — 20.33 (feet)
•
"Preset": You can store an adjusted sound control
value by selecting "Memory". Refer to
<Memory mode> (page 16). Also, you
can recall it by selecting "Recall". Refer to
<Memory Recall mode> (page 16).
Position Setting
Front-Left/ Front-Right/
Front/ ALL
•
When the "2ZONE" of <Audio Setup> (page 11) is
5 Adjust the Sound Management item
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
"ON", the following setups are ignored.
- "X'Over"
- "DTA"
- "POSI"
- "Preset"
6 Exit Sound Field Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
Sound Managemnt Item Range
Cabin Setting
OFF/ Compact/ Full Size Car/
Wagon1/ Wagon2/ Minivan1/
Minivan2/ SUV/ Minivan (Long)
Speaker Select Front
Speaker Select Rear
6 ½/ 6 ¾/ 7/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ O.E.M./ 4/ 5 (inch)
Sound Management system
6 ½/ 6 ¾/ 7/ 4x6/ 5x7/ 6x8/ 6x9/
7x10/ None/ O.E.M./ 4/ 5 (inch)
1 Select the source to adjust
Press the [SRC] button.
Speaker Select Subwoofer
6 ½/ 8/ 10/ 12/ 15over/ None
(inch)
2 Show the Multi-function display
Press the [NEXT] button repeatedly until
"S.M.S" appears.
Refer to <Notes on Multi-function System> (page
9).
6 Exit Sound Managemnt mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
3 Enter Sound Management mode
Turn the [VOL] knob to select "S.M.S".
Press the [VOL] knob.
•
When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "S.M.S".
4 Select the Sound Management item to
adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item Sound Management Item
"Cabin"
"Front"
"Rear"
Cabin Setting
Speaker Select Front
Speaker Select Rear
"Sub-W"
"Preset"
Speaker Select Subwoofer
Preset value storage/recalling
English
|
13
General features
Equalizer Control
Top 40
Jazz
"Top40"
"Jazz"
1 Select the source to adjust
Press the [SRC] button.
•
•
User memory:
The values set on the <Equalizer Front Setting/
Equalizer Rear Setting>.
Change each setting value with the <Sound
Management system> (page 13).
First, select the speaker type with the Speaker setting.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until "EQ"
appears.
Refer to <Notes on Multi-function System> (page
9).
3 Enter Equalizer Control mode
Turn the [VOL] knob to select "EQ".
Press the [VOL] knob.
Equalizer Front Setting/
Equalizer Rear Setting
1 Select a frequency band you wish to adjust
Press the Control knob.
Each time you press the button is pressed, the
band alternates between "Band 1" and "Band 4".
2 Select the items to adjust for Equalizer.
Press the [FM] or [AM] button.
Each time you press the button is pressed, the
item to be adjusted alternates between the
items shown in the table below.
•
When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "EQ".
4 Select the Equalizer Control item to adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item Equalizer Control Item
1
2
Equalizer Control Item
Equalizer Frequency
"SystemQ"
"Front"
System Q Setting
"Band1"/ "FREQ"
"Band2"/
"Band3"/
Equalizer Front Setting
Equalizer Rear Setting
Preset value storage/recalling
"Level"
Equalizer Level
"Rear"*
"Preset"
"Q Factor" Equalizer Quality
"Band4"
3 Adjust the Equalizer.
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
•
•
"Preset": You can store an adjusted sound control
value by selecting "Memory". Refer to
<Memory mode> (page 16). Also, you
can recall it by selecting "Recall". Refer to
<Memory Recall mode> (page 16).
* You can control this item when Speaker Select Rear
of <Sound Management system> (page 13) is set to
any item other than "None".
Equarizer adjustment item Range
Equalizer Front Frequency/
Equalizer Rear Frequency
Refer to the followings.
5 Adjust the Equalizer control item
Equalizer Front Level/
Equalizer Rear Level
–9 — +9
System Q Setting (Sound Type)
Push the Control knob towards [4] or
[¢].
Equalizer Front Quality/
Equalizer Rear Quality
0.25/ 0.50/ 1.00/ 2.00
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
•
The frequency which can be selected by each
Frequency band is shown below.
Sound setting
User memory
Natural
Rock
Pops
Display
"User"
"Natural"
"Rock"
"Pops"
"Easy"
Band
Band1
Band2
Band3
Band4
Frequency
60/ 80/ 100/ 120/ 160/ 200 (Hz)
250/ 315/ 400/ 500/ 630/ 800/ 1k (Hz)
1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)
5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)
Easy
|
14
English
WOW Control Item
Effect
FOCUS
TruBass Front
TruBass Rear
SRS 3D
Range
Middle/High/User/Through/Low
OFF/1 — 9
OFF/1 — 4
OFF/1 — 4
OFF/1 — 4
•
To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 13).
6 Exit Equalizer Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
•
•
Effect: TruBass, FOCUS and SRS 3D are all set to values
shown in the table below.
Effect TruBass FOCUS SRS 3D
WOW Control
High
Middle
Low
4
3
2
8
6
3
4
2
1
1 Select the source to adjust
Press the [SRC] button.
FOCUS: Adjusts the vertical position of the front
speaker and sound image by virtual
adjustment.
TruBass: Assists the playback for the super bass sound.
SRS 3D: Makes a natural 3D sound field.
You cannot set SRS 3D in tuner source.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until "SRS
WOW" appears.
Refer to <Notes on Multi-function System> (page
9).
•
•
•
3 Enter WOW Control mode
Turn the [VOL] knob to select "SRS WOW".
Press the [VOL] knob.
6 Exit WOW Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
•
When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "SRS WOW".
•
To get the best sound, first set the Speaker select.
4 Select the WOW Control item to adjust
Turn the [VOL] knob to select the item you
want to select.
Press the [VOL] knob.
Multi-function item
"Effect"
WOW Control Item
Effect
"FOCUS"
FOCUS
"TB-F"
"TB-R"*
"SRS 3D"
TruBass Front
TruBass Rear
SRS 3D
•
* You can control this item when Speaker Select Rear
of <Sound Management system> (page 13) is set to
any item other than "None".
5 Adjust the WOW control item
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
English
|
15
General features
Bypass Control
4 Put in the memory
Turn the [VOL] knob to select "Memory1" or
"Memory2".
Temorarily bypassing DSP (Digital Signal
Processor) System.
Press the [VOL] knob for at least 2 seconds.
The "MEMORY" display blinks 1 time.
1 Select the source to adjust
Press the [SRC] button.
5 Exit Memory mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until
"DSP" appears.
Refer to <Notes on Multi-function System> (page
9).
•
•
"Memory1": When you press the Reset, all the
sources will be the setting value which is
registered.
The following items cannot be registered.
Rear Volume, Balance, Fader, Position Setting, System
Q Setting
3 Enter Bypass Control mode
Turn the [VOL] knob to select "DSP".
Press the [VOL] knob.
•
When "2ZONE" of <Audio Setup> (page 11) is ON, you
cannot select "DSP".
Memory Recall mode
4 Set up Bypass
Recall the value in the memory by the memory
mode.
Press the [VOL] knob.
"Bypass": There is no effect by DSP.
"Through": There is an effect by DSP.
1 Select the source to adjust
Press the [SRC] button.
•
•
When the mode is set to "Bypass", DSP System cannot
be adjusted.
When the mode is set to "Bypass", ODD D/A System is
not effective.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until
"S.F.C" appears.
Refer to <Notes on Multi-function System> (page
9).
3 Select the key function which contains the
item you wish to recall
Turn the [VOL] knob to select "S.F.C"/ "S.M.S"/
"EQ".
Memory mode
Storing the values of Sound Control in memory.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
Press the [VOL] knob.
4 Select the Preset Memory item
Turn the [VOL] knob to select "Preset".
Press the [VOL] knob.
- <Audio Control> (page 11)
- <Sound Field Control> (page 12)
- <Sound Management system> (page 13)
- <Equalizer Control> (page 14)
5 Enter recall mode
Turn the [VOL] knob to select "Recall".
Press the [VOL] knob.
2 Select the Preset Memory item
Turn the [VOL] knob to select "Preset".
Press the [VOL] knob.
6 Select the recall item
Turn the [VOL] knob to select "Recall1" or
"Recall2".
Press the [VOL] knob for at least 2 seconds.
The "RECALL" display blinks 1 time.
3 Enter Memory mode
Turn the [VOL] knob to select "Memory".
Press the [VOL] knob.
|
16
English
"Recall1": Recall the value put in "Memory1" by
<Memory mode> (page 16).
"Recall2": Recall the value put in "Memory2" by
<Memory mode> (page 16).
2 Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.
7 Exit Memory Recall mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach
it.
Faceplate Angle Adjustment
Press the [ANG] button for at least 1 second.
•
Do not apply excessive force to the faceplate. It can
cause damage.
•
•
The faceplate is a precision piece of equipment and
can be damaged by shocks or jolts. For that reason,
keep the faceplate in its special storage case while
detached.
Do not expose the faceplate or its storage case to
direct sunlight or excessive heat or humidity. Also
avoid places with too much dust or the possibility of
water splashing.
Reattaching the Faceplate
1 Align the shaft on the unit with the
depression on the faceplate.
English
|
17
General features
8 Graphic display part
9 G-Analyzer display part
Display Type Selection
Changing the display mode.
5 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
•
Change the information by the Display Type. Refer to
the page on the following table for the methods to
alternate by the Display Type.
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
Display Type
1st text 1
2nd text 2
3rd text 3
4th text 4
Icon 6
A
B
C
D
22
22
22
22
E
—
—
—
—
—
—
18
—
—
—
—
—
20
22
22
22
22
—
—
—
—
—
—
—
—
—
—
—
27
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
26
Text 7
4 Select the display Type
Push the Control knob towards [4] or
[¢].
—
—
—
Graphic 8
G-Analyzer 9
18
—
—
Each time you push the knob, the display mode
alternates between the display modes shown in
the table below.
Display Type A/ Display Type B
Display Mode Display
Graphic part/ Spectrum Analyzer
Display Switching
"Display Type A"
8
Changing the graphic Display/ Spectrum analyzer
display.
"Display Type B"
8
7
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
"Display Type C"
1
5
2
3
4
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
"Display Type D"
1
2
6
3
4
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
"Display Type E"
9
4 Select the display Type
Push the Control knob towards [4] or
[¢].
1 1st text display part
2 2nd text display part
3 3rd text display part
4 4th text display part
5 Indicator display part
6 Icon display part
Select the "Display Type A"/ "Display Type B"
display.
5 Select the graphic/ spectrum analyzer
display
Turn the [VOL] knob to select "SA/GRPH".
Press the [VOL] knob.
7 Text display part
|
18
English
2 Select the wallpaper.
Push the Control knob towards [FM] or
[AM].
Each time you push the knob, the Wallpaper
changes.
6 Select the graphic/ spectrum analyzer
display part display
Push the Control knob towards [4] or
[¢].
Each time you press the button, the graphic
display/ spectrum analyzer display alternates
between the displays shown in the table below.
3 Exit Display Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
Graphic display/ Spectrum Analyzer display
Movie 1
Movie 2
Movie 3 (Movie 1 and Movie 2)
Spectrum analyzer 1
Spectrum analyzer 8
Wallpaper & *Downloaded Wallpaper
7 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
•
•
* For Download Wall Paper, refer to <Picture
downloading> (page 51).
During standby, Spectrum analyzer cannot be
selected.
Display Type A/ Display Type B
Wallpaper selecting
Selecting a wallpaper to display when Display
Type is set to "Display Type A"/ "Display Type B".
1 Select the wallpaper display
Refer to <Graphic part/ Spectrum Analyzer
Display Switching> (page 18).
2 Select the wallpaper
Display the wallpapers one after another
Press the Control knob.
Each time you press the knob, the Wallpaper
scan is turned ON and OFF.
When scan is ON, "SCAN" is displayed.
When scan is ON, each wallpaper is displayed
every several seconds.
Select wallpaper manually
1 Turn the wallpaper scan OFF.
Press the Control knob.
Each time you press the knob, the Wallpaper
scan is turned ON and OFF.
English
|
19
General features
Display Type B
In Audio file source
Text Selection for Display
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
File number & Play time
Clock
Display
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
"P-Time"
Selecting the text display.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
"Clock"
"Date"
Date
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
In HD Radio source
Information
Station name
Title
Frequency
Clock
Display
"Station Name"*
"Title"*
"Frequency"
"Clock"
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
Date
"Date"
4 Select the display Type
Push the Control knob towards [4] or
[¢].
In SIRIUS tuner source
Select the "Display Type B" display.
Information
Channel Name
Song Title
Artist Name
Composer name
Category Name
Label Name
Comment
Display
"Channel Name"
"Song Title"
"Artist Name"
"Composer Name"
"Category Name"
"Label Name"
"Comment"
5 Enter text select mode
Turn the [VOL] knob to select "Text".
Press the [VOL] knob.
6 Select the text
Push the Control knob towards [4] or
[¢].
Channel number
Clock
Date
"Channel Number"
"Clock"
"Date"
In Tuner source
Information
Station name or Program Service name
Display
"BAND+ch+SNPS"*
In DAB source
Radio text or Program Service name (FM) "Radio Text"*
Frequency
Clock
Date
"BAND+ch+FREQ"
"Clock"
"Date"
Information
Service label
Dynamic label
PTY label
Component label
Audio quality
Ensemble label
Region label
Received Frequency
Clock
Display
"Service Label"*
"Dynamic Label"*²
"PTY Label"*²
"Component Label"*
"Audio Quality"*²
"Ensemble Label"*
"Region Label"*
"Frequency"
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Disc Name
Clock
Display
"Disc Title"*
"Track Title"*
"P-Time"
"DNPS"*¹
"Clock"
"Clock"
"Date"
Date
Date
"Date"
|
20
English
In Auxiliary input source
Information
Auxiliary input name
Clock
Display
"AUX Name"/ "AUX EXT"
"Clock"
Date
"Date"
In Standby mode
Information
Source name
Clock
Display
"Standby"
"Clock"
Date
"Date"
7 Exit Display Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
•
•
•
•
Auxiliary input name is displayed for the Auxiliary
input source.
* If the contents of the information cannot be
displayed, Play time or Frequency is displayed.
*¹ If the contents of the information cannot be
displayed, "No Name" is displayed.
*² If the contents of the information cannot be
displayed, "No Text"/"None"/"Obscure Audio" is
displayed.
•
•
If the contents of the information for the SIRIUS
tuner source cannot be displayed, channel number is
displayed.
Track number at Audio file displays the last 3 digits
when the track number exceeds 1000 songs.
English
|
21
General features
3 3rd text display part
4 4th text display part
5 Indicator display part
6 Icon display part
Display Type C/ Display Type D
Text Display Switching
Changing the text display.
Select the row
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
Push the Control knob towards [FM] or [AM].
The cursor (Ü) moves to the selected text display
part.
Select the text
Push the Control knob towards [4] or
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
[¢].
Refer to the table described later for setting
items.
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
7 Exit Display Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
4 Select the display Type
Push the Control knob towards [4] or
[¢].
Select the "Display Type C"/"Display Type D"
display.
•
•
Same information cannot be displayed in 1st – 4th
text display part. However, the blank display is able to
have multiple selections.
* If the contents of the information cannot be
displayed, either of the following is displayed:
- In the 1st text display part1 , the play time or
frequency is displayed.
5 Enter text select mode
Turn the [VOL] knob to select "Text".
Press the [VOL] knob.
- In other modes, blank is displayed.
*¹ If the contents of the information cannot be
displayed, "No Name" is displayed.
*² If the contents of the information cannot be
displayed, "No Text"/"None"/"Obscure Audio" is
displayed.
6 Select the text display part
•
•
Select the display mode
Press the Control knob.
Each time you push the knob, the display mode
alternates between the display modes shown in
the table below.
•
•
If the contents of the information for the SIRIUS
tuner source cannot be displayed, channel number is
displayed.
Setting in some rows cannot be changed during
interrupt mode (e.g., traffic information).
Display Type C
Display Type D
1
1
2
3
4
6
5
2
3
4
a
b
c
1
2
3
4
1
2
3
4
6
6
Texts displayed on Display Type C/D display
in 2-item displaya mode
In Tuner source
1
1
Information (12)
Source name
Frequency
a Source display and 2-item display
b 4-item display
c 1-item 4-row display
1 1st text display part
2 2nd text display part
Information (34)
Radio text (FM)
Station name or Program Service
name
Display
"Radio Text"*
"SNPS"*¹
|
22
English
In HD Radio source
Spectrum Analyzer & Clock
Date
No display
"Speana/Clock"
"Date"
"Blank"
Information (12)
Source name
Frequency
In CD & External disc source
Information (34)
Station name
Title
Spectrum Analyzer & Clock
Date
Display
"Station Name"*
"Title"*
"Speana/Clock"
"Date"
"Blank"
Information (12)
Source name
Track number & Play time
Information (34)
Disc title
Track title
Display
No display
"Disc Title"*
"Track Title"*
"DNPS"*¹
In SIRIUS tuner source
Disc name
Spectrum Analyzer & Clock
Date
No display
"Speana/Clock"
"Date"
"Blank"
Information (12)
Source name
Band & Channel Number
Information (34)
Channel Name
Song Title
Display
In Audio file source
"Channel Name"*
"Song Title"*
"Artist Name"*
"Composer Name"*
"Category Name"*
"Label Name"*
"Comment"*
"Speana/Clock"
"Date"
Information (12)
Source name
Folder number, File number & Play time
Artist Name
Composer name
Category Name
Label Name
Comment
Spectrum Analyzer & Clock
Date
Information (34)
Song title & Artist name
Album name & Artist name
Folder name
File name
Spectrum Analyzer & Clock
Date
Display
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
"Speana/Clock"
"Date"
No display
"Blank"
In DAB source
No display
"Blank"
Information (12)
Source name
In Standby
Frequency
Information (12)
Source name
Information (34)
Service label
Dynamic label
PTY label
Component label
Audio quality
Ensemble label
Region label
Spectrum Analyzer & Clock
Date
Display
"Service Label"*
"Dynamic Label"*²
"PTY Label"*²
"Component Label"*
"Audio Quality"*²
"Ensemble Label"*
"Region Label"*
"Speana/Clock"
"Date"
Information (34)
Clock
Date
No display
Display
"Clock"
"Date"
"Blank"
In Auxiliary input source
Information (12)
Source name
Information (34)
Spectrum Analyzer & Clock
Date
Display
"Speana/Clock"
"Date"
No display
"Blank"
No display
"Blank"
English
|
23
General features
Texts displayed on Display Type C/D display
In Auxiliary input source
in 4-item displayb mode
Information
Auxiliary input name
Indicator
Spectrum Analyzer & Clock "Speana/Clock"
Date
Display
"AUX Name"/"AUX EXT"
"Indicator"
Condition
1
In Tuner source
1234
1234
1234
234
Information
Display
Condition
1
Station name or Program "BAND+ch+SNPS"*
Service name
"Date"
"Blank"
No display
Radio text or Program
Service name (FM)
"Radio Text"*
1
In HD Radio source
Radio text (FM)
"Radio Text"*
234
234
Information
Station name
Title
Frequency
Indicator
Spectrum Analyzer & Clock "Speana/Clock"
Date
No display
Display
"Station Name"*
"Title"*
"Frequency"
"Indicator"
Condition
1234
1234
1
Station name or Program "SNPS"*¹
Service name
Frequency
Indicator
"BAND+ch+FREQ"
"Indicator"
1
1234
1234
1234
234
1234
1234
1234
234
Spectrum Analyzer & Clock "Speana/Clock"
Date
"Date"
"Date"
"Blank"
No display
"Blank"
In CD & External disc source
In SIRIUS tuner source
Information
Disc title
Track title
Track number & Play time
Disc name
Indicator
Display
Condition
Information
Channel Name
Song Title
Display
Condition
"Disc Title"*
"Track Title"*
"P-Time"
"DNPS"*¹
"Indicator"
1234
1234
1
"Channel Name"* 1234
"Song Title"*
1234
Artist Name
"Artist Name"*
1234
1234
1234
1234
1234
234
Composer name
Category Name
Label Name
"Composer Name"* 1234
"Category Name"* 1234
"Label Name"*
"Comment"*
Spectrum Analyzer & Clock "Speana/Clock"
1234
1234
1
Date
"Date"
Comment
No display
"Blank"
Band & Channel Number
Indicator
"Channel Number"
"Indicator"
1234
1234
1234
234
In Audio file source
Spectrum Analyzer & Clock "Speana/Clock"
Information
Display
Condition
Date
"Date"
Song title & Artist name
"Title/Artist"*
1234
1234
1234
1234
1
No display
"Blank"
Album name & Artist name "Album/Artist"*
In DAB source
Folder name
File name
File number & Play time
Indicator
"Folder Name"
"File Name"
"P-Time"
Information
Service label
Dynamic label
PTY label
Component label
Audio quality
Ensemble label
Region label
Display
"Service Label"*
Condition
1234
"Indicator"
1234
1234
1234
234
"Dynamic Label"*² 1234
"PTY Label"*²
1234
"Component Label"* 1234
"Audio Quality"*²
1234
"Ensemble Label"* 1234
"Region Label"*
"Frequency"
"Indicator"
Spectrum Analyzer & Clock "Speana/Clock"
Date
"Date"
No display
"Blank"
In Standby
1234
Information
Standby
Indicator
Clock
Display
"Standby"
"Indicator"
"Clock"
Condition
1
Received Frequency
Indicator
1
1234
1234
1234
234
1234
1234
1234
234
Spectrum Analyzer & Clock "Speana/Clock"
Date
"Date"
Date
"Date"
No display
"Blank"
No display
"Blank"
|
24
English
•
For the SIRIUS tuner source, information is displayed in
the 2-item display mode.
Texts displayed on Display Type C/D in 1-item
4-rowc mode
Display Type C
Display Type D
In Tuner source
1
1
2
6
Information
Radio text or Program Service name "Radio Text"*
(FM)
Display
2
In CD & External disc source
Information
Disc title
Track title
Display
"Disc Title"*
"Track Title"*
In Audio file source
Information
Display
Song title & Artist name
Album name & Artist name
Folder name
"Title/Artist"*
"Album/Artist"*
"Folder Name"
"File Name"
File name
In HD Radio source
Information
Display
Title
"Title"*
In SIRIUS tuner source
Information
Channel Name
Song Title
Display
"Channel Name"*
"Song Title"*
Artist Name
Composer name
Category Name
Label Name
Comment
"Artist Name"*
"Composer Name"*
"Category Name"*
"Label Name"*
"Comment"*
In DAB source
Information
Display
Dynamic label
"Dynamic Label"*
•
•
If whole information cannot be displayed within four
rows, hold down on [FM] of the Control knob for at
least 1 second to display the remaining portion of the
information.
External disc source can be selected when a unit
supporting the text display function is connected.
English
|
25
General features
•
During album art downloading, "Down-loading" is
displayed. Downloading requires a maximum of 30
seconds.
Display Type D
Icon Display Switching
Changing the Icon Display6.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
Display Type B/ Display Type C/ Display Type D
Font Color Select
Selecting the display font color.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
Refer to <Notes on Multi-function System> (page
9).
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
4 Select the display Type
Push the Control knob towards [4] or
[¢].
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
Select the "Display Type D" display.
5 Enter Icon select mode
Turn the [VOL] knob to select "Side".
Press the [VOL] knob.
4 Select the display Type
Push the Control knob towards [4] or
[¢].
Select the "Display Type B"/"Display Type
C"/"Display Type D" display.
6 Switch the Icon display
Push the Control knob towards [4] or
[¢].
5 Enter Font Color select mode
Turn the [VOL] knob to select "FontCOL".
Press the [VOL] knob.
Each time you press the button is pressed, the
setting alternates as shown below.
Icon display
Display
6 Select the text display part
Source graphic
Text label
Play mode label (ACDrive disc)
Album art (ACDrive disc)
"Source"
"Text"
"Play Mode"
"Photograph"
Select the Font Color mode
Press the Control knob.
Each time you press the knob, the font color
mode is switched between Basic (12 colors) and
Detail (115 colors).
The cursor (Ü) is displayed in blue. In the Detail
mode, it is displayed in red.
7 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
Select the row (Display Type C/Display Type
D only)
Push the Control knob towards [FM] or [AM].
The cursor (Ü) moves to the selected text display
part.
•
•
•
The Album art display function displays the image
attached to the file by Media Manager. This function
cannot display the image contained in the play list.
The Album art display function is not used to display
the image corresponding to the tag recorded in the
Audio file.
If Album art display is selected during playback of an
ACDrive disc on which no album art is recorded, a
source icon is displayed.
Select the Font Color
Push the Control knob towards [4] or
[¢].
|
26
English
7 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
G-Analyzer display
G- Graphic display
G-Meter display
G-Counter display
•
•
When you selected the Display Type B display, select
an easy viewable font color.
ACCELERATION
CORNERING
The "Indicator" item of Display type C/D can be set;
however, the actual display color does not change.
This function can be set for each display type.
When the SIRIUS tuner source in the 1-item 4-rowc
mode of Display type C/D, the same color is set for
both the upper and lower rows.
•
•
Point
Time
•
•
G-Graphic display:
Display Type E
Displays the condition of G in horizontal direction (e.g;
when turning the curve) by the graphic.
G-Meter display (Graphic part):
Displays the maximum value of acceleration G, right
direction G, and left direction G by the numerical
value.
G-Analyzer display Switching
Alternates G-Analyzer display when the Display
type is set to "Display Type E". (G: gravity)
G-Meter display (Text part):
•
•
Never watch the G-Analyzer Display screen when you
are driving.
Otherwise, a car accident may result.
The maximum value of acceleration G, right direction
G, and left direction G is displayed by the numerical
value. The value of G is only the reference, so is
different from the actual value.
•
G-Counter display:
Before alternating G-Analyzer display, you are required
to setup <G-Counter Level set> (page 47) and <G-
Analyzer Calibration setup> (page 48).
Adds the point of the acceleration level. The point is
determined after a lapse of 1 hr drive or at power off
(ACC Off), and then it will be displayed by the graph.
Furthermore, the G-Counter displays the average
of the past data by the line. (The scale of graph is
determined along with the largest point among the
past 10 data.)
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
•
The value of G-Meter display and G-Counter display
can be reset by <G-Analyzer Reset> (page 47).
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
6 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
3 Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
Select the "Display Type E" display.
4 Enter G-Analyzer display select mode
Turn the [VOL] knob to select "G-Menu".
Press the [VOL] knob.
5 Select the G-Analyzer display
Push the Control knob towards [4] or
[¢].
English
|
27
General features
Station/Disc Naming (SNPS/DNPS)
9 Exit Menu mode
Press the [MENU] button.
Attaching a title to a Station or CD.
1 Receive/play the station/disc you want to
attach a title to
•
•
When operation stops for 10 seconds the name at
that time is registered, and Menu mode closes.
Memory numbers
- FM/AM: 30 stations
- Internal CD player: 10 discs
•
A title cannot be attached to MD or Audio file media.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
Change the title of station/CD by the same operation
used to name it.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
•
3 Select Name set mode
Push the Control knob towards [4] or
[¢].
Select the "Name Set" display.
TEL Mute
4 Enter Name set mode
The audio system automatically mutes when a
call comes in.
Press the Control knob for at least 1 second.
5 Move the cursor to the enter character
position
Push the Control knob towards [4] or
[¢].
When a call comes in
"Call" is displayed.
The audio system pauses.
6 Select the character type
Press the Control knob.
Listening to the audio during a call
Press the [SRC] button.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
The "Call" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "Call" display disappears and the audio
system comes back ON.
Character type
Display
"A-Z"
"a-z"
"1•*"
"ë"
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
7 Select the characters
Push the Control knob towards [FM] or [AM].
•
Enter characters by using a remote control with
numbers buttons.
Example: If you are entering "DANCE".
Character
"D"
"A"
"N"
"C"
Button
[3]
[2]
[6]
[2]
Times pressed
1
1
2
3
2
"E"
[3]
8 Repeat steps 5 through 7 and enter the name.
|
28
English
Tuner features
NEXT
VOL
AUTO/AME
SRC
Control knob
Band display
Frequency display
1
2
3
4
5
6
Tuner
FM1-1ch 107.7 MHz
SNPS
ST indicator
Preset station number
Tuning
Tuning Mode
Selecting the station.
Choose the tuning mode.
Press the [AUTO] button.
1 Select tuner source
Press the [SRC] button.
Select the "TUNER" display.
Each time you press the button, the Tuning
mode alternates between the modes shown in
the table below.
2 Select the band
Tuning mode
Auto seek
Display
Operation
Push the Control knob towards [FM] or [AM].
Each time you push the knob toward [FM], it
switches between the FM1, FM2, and FM3 bands.
"Seek Mode: Automatic search for a station.
Auto1"
Preset station seek "Seek Mode: Search in order of the stations
Auto2" in the Preset memory.
3 Tune up or down band
Push the Control knob towards [4] or
[¢].
Manual
"Seek Mode: Normal manual tuning control.
Manual"
•
During reception of stereo stations the "ST" indicator
is ON.
English
|
29
Tuner features
Function of remote control
Auto Memory Entry
Direct Access Tuning
Putting stations with good reception in the
memory automatically.
Entering the frequency and tuning.
1 Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
1 Select the band
Press the [FM] or [AM] button.
2 Open Auto Memory Entry
2 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
"– – – –" is displayed.
3 Enter the frequency
Press the number buttons on the remote
control.
Example:
Preset Tuning
Desired frequency
92.1 MHz (FM)
810 kHz (AM)
Press button
[0], [9], [2], [1]
[0], [8], [1], [0]
Recalling the stations in the memory.
1 Select the band
Push the Control knob towards [FM] or [AM].
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to <Notes on Multi-function System> (page
9).
Station Preset Memory
3 Select a preset number
Turn the [VOL] knob.
Putting the station in the memory.
4 Recall the station
Press the [VOL] knob.
1 Select the band
Push the Control knob towards [FM] or [AM].
2 Select the frequency to put in the memory
Push the Control knob towards [4] or
[¢].
3 Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to <Notes on Multi-function System> (page
9).
4 Select a preset number
Turn the [VOL] knob.
5 Put the frequency in the memory
Press the [VOL] knob for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] number.
|
30
English
RDS features
NEXT
VOL
AUTO
SRC
Control knob
1
2
3
4
5
6
Tuner
FM1-1ch 107.7 MHz
SNPS
Radio Text
Radio text
Radio Text Scroll
Registration of a station as a PTY
Scrolling the displayed radio text.
Registering a Program Type for stations with no
PTY data.
Hold down on [FM] of the Control knob for at
least 1 second.
1 Receive the station you want to register
2 Select the Program Type to register
Refer to <PTY (Program Type)> (page 32).
3 Register the Program Type
Press the [AUTO] button for at least 2
seconds.
Confirming the Program Type
Press the [AUTO] button.
The Program Type is displayed for 3 seconds.
4 Exit PTY mode
Press the Control knob.
English
|
31
RDS features
PTY (Program Type)
3 Search for the selected Program Type
station
Push the Control knob towards [4] or
[¢].
When you want to search for other stations, push
toward [4] or [¢] of the Control knob again.
Selecting the Program Type and searching for a
station.
1 Enter PTY mode
Press the Control knob.
"PTY Select" is displayed.
•
When selected Program Type is not found, "No PTY" is
displayed. Select another Program Type.
•
The PTY function cannot be used during a traffic
bulletin or AM reception.
4 Exit PTY mode
Press the Control knob.
2 Select the Program Type
Push the Control knob towards [FM] or [AM].
No.
1.
2.
Program Type
Speech
Music
Display
"All Speech"
"All Music"
"News"
Program Type preset
3.
News
Putting the Program Type in the Preset button
memory and quick recall.
4.
5.
Information
Sports
"Information"
"Sports"
6.
Talk
"Talk"
Presetting the Program Type
7.
8.
9.
Rock
"Rock"
1 Select the Program Type to preset
Classic Rock
Adult Hits
Soft Rock
Top 40
Country
Oldies
Soft
Nostalgia
Jazz
"Classic Rock"
"Adult Hits"
"Soft Rock"
"Top 40"
"Country"
"Oldies"
"Soft"
"Nostalgia"
"Jazz"
"Classical"
"Rhythm & Blues"
"Soft R & B"
"Foreign Language"
"Religious Music"
"Religious Talk"
"Personality"
"Public"
Refer to <PTY (Program Type)> (page 32).
2 Select a preset number
Turn the [VOL] knob.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
3 Preset the Program Type
Press the [VOL] knob for at least 2 seconds.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)> (page 32).
Classical
R & B
2 Select a preset number
Turn the [VOL] knob.
Soft R & B
Language
Religious Music
Religious Talk
Personality
Public
3 Recall the Program Type
Press the [VOL] knob.
College
Weather
"College"
"Weather"
•
•
Speech and Music include the Program type below.
Music: No.7 — 19, 21
Speech: No.3 — 6, 20, 22 — 26
The Program Type can be put in the [1] — [6] number
memory and recalled quickly. Refer to the <Program
Type preset> (page 32).
|
32
English
CD/Audio file/External disc control features
0
NEXT
VOL
SRC
Control knob
IN indicator
Folder number
Play mode indicator
S.Mode
Compact Disc
Scan
Random
Repeat
F.SEL
PLY F-02 T-01 10 : 00
Album/Artis
Title
Track number
Track time
•
During AAC/MP3/WMA file playback, the AAC, MP3,
and WMA indicators are lit.
Playing CD & Audio file
When there is no disc inserted
When a disc is inserted
Press the [SRC] button.
Select the "Compact Disc" display.
1 Open the panel.
Press the [0] button.
Pause and play
2 Insert a disc.
Press the Control knob
Each time you press the knob, the audio pauses
or plays.
•
•
When the faceplate slides open, it might interfere
with the shift lever or other vehicle function. If this
happens, pay attention to safety and move the shift
lever or take an appropriate action to remove the
obstacle, then operate the unit.
Insert the disc horizontal to the slot. If you insert the
Disc as you push down on the Disc, it may scratch the
Disc.
Eject the disc
1 Eject the disc
Press the [0] button.
2 Return the panel to the original position
Press the [0] button.
•
•
•
Refer to <About AAC, MP3 and WMA> (page 8) for the
Audio file by models you can play.
You can play the disc (ACDrive disc) made by Media
Manager by the same operation.
You can cancel the announcement when selecting
the folder by <Voice Index> (page 51) during the play
of the ACDrive.
•
When a disc is inserted the "IN" indicator is ON.
English
|
33
CD/Audio file/External disc control features
Function of disc changer/ Audio file
Playing External Disc
Disc Search/Folder Search
Playing discs set in the optional accessory disc
player connected to this unit.
Selecting the disc set in the Disc changer or the
folder recorded on the Audio file media.
Press the [SRC] button.
Select the display for the disc player you want.
Display examples:
Push the Control knob towards [FM] or [AM].
Display
"CD Changer"
"MD Changer"
Disc player
CD changer
MD changer
Function of remote control
Direct Track/File Search
Pause and play
Doing Track/File Search by entering the track/file
number.
Press the Control knob.
Each time you press the knob, the audio pauses
or plays.
1 Enter the track/file number
Press the number buttons on the remote
control.
•
The functions that can be used and the information
that can be displayed will differ depending on the
external disc players being connected.
•
You can select Direct File Search up to 999.
2 Do Track/File Search
Press the [4] or [¢] button.
Cancelling Direct Track/File Search
Press the [38] button.
Fast Forwarding and Reversing
Fast Forwarding
Hold down toward [¢] with the Control
knob.
Release your finger to play the disc at that point.
Function of disc changers with remote control
Direct Disc Search
Reversing
Doing Disc Search by entering the disc number.
Hold down toward [4] with the Control
knob.
Release your finger to play the disc at that point.
1 Enter the disc number
Press the number buttons on the remote
control.
•
•
There is no sound while the Audio file is being
searched.
You cannot fast Forwarding and Reversing depending
on AAC file format.
2 Do Disc Search
Press the [+] or [–] button.
Cancelling Direct Disc Search
Press the [38] button.
Track/File Search
Searching for a song on the disc or in the Audio
file folder.
Push the Control knob towards [4] or
[¢].
|
34
English
Track/File/Disc/Folder Repeat
Random Play
Replaying the song, disc in the Disc changer or
Audio file folder you are listening to.
Play all the songs on the disc or Audio file folder
in random order.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Repeat" appears.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Random" appears.
Refer to <Notes on Multi-function System> (page
9).
Refer to <Notes on Multi-function System> (page
9).
2 Turn ON/OFF the Repeat Play
Turn the [VOL] knob to select "Repeat".
Press the [VOL] knob.
2 Turn ON/OFF the Random Play
Turn the [VOL] knob to select "Random".
Press the [VOL] knob.
Each time you press the button, the Repeat Play
alternates between the modes shown in the
tables below.
Each time you press the button, Random Play
turns ON or OFF.
When the Random mode is ON, "Random ON" is
displayed.
In CD & External disc source
Repeat play
Track Repeat
Disc Repeat (In Disc Changer)
OFF
Display
•
When you push the Control knob toward [¢], the
next random song starts.
"Repeat ON"/ "Track Repeat ON"
"Disc Repeat ON"
"Repeat OFF"
In Audio file
Function of disc changer
Repeat play
File Repeat
Folder Repeat
OFF
Display
Magazine Random Play
"File Repeat ON"
"Folder Repeat ON"
"Repeat OFF"
Play the songs on all the discs in the disc changer
in random order.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"M.RDM" appears.
Refer to <Notes on Multi-function System> (page
9).
Scan Play
Playing the first part of each song on the disc
or Audio file folder you are listening to and
searching for the song you want to hear.
2 Turning ON/OFF the Magazine Random Play
Turn the [VOL] knob to select "M.RDM".
Press the [VOL] knob.
Each time you press the button, the Magazine
Random Play turns ON or OFF.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Scan" appears.
Refer to <Notes on Multi-function System> (page
9).
When the Magazine Random mode is ON,
"Magazine Random ON" is displayed.
2 Start Scan Play
Turn the [VOL] knob to select "Scan".
Press the [VOL] knob.
•
When you push the Control knob toward [¢], the
next random song starts.
"Scan ON"/"Track Scan ON" is displayed.
3 Release the button when the song you want
to hear is played
Press the Control knob.
English
|
35
CD/Audio file/External disc control features
Function of Audio file
Folder number display
Displays the number in the folder belonging
to the currently selected folder.
Disc Random Play
Playing randomly from all of the Audio files
recorded in the disc.
Folder
2
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Random" appears.
Refer to <Notes on Multi-function System> (page
9).
Folder name display
Displays the current folder name.
3 Select the folder level*
2 Turn ON the Disc Random Play
Turn the [VOL] knob to select "Random".
Press the [VOL] knob for at least 1 second.
When the random mode is ON, "Disc Random
ON" is displayed.
Push the Control knob towards [FM] or [AM].
With the [AM] button, you move 1 level down
and with the [FM] button, 1 level up.
Selecting a folder in the same level
Push the Control knob towards [4] or
[¢].
With the [4] of the Control knob, you move
to the previous folder, and with the [¢] of the
Control knob, to the next folder.
Cancelling the Disc Random Play
Turn the [VOL] knob to select "Random".
Press the [VOL] knob.
•
When you push the Control knob toward [¢], the
next random song starts.
Returning to the top level*
Turn the [VOL] knob to select "Home".
Press the [VOL] knob.
Function of Audio file
•
* You cannot operate this function when <Switching
the Play mode> (page 37) is set to other than "Folder
Mode" while playing ACDrive.
Folder Select
Quickly selecting the folder you want to hear.
Scrolling the folder name display
Hold down on [FM] of the Control knob for at
least 1 second.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"F.SEL" appears.
Refer to <Notes on Multi-function System> (page
9).
4 Decide the folder to play
Turn the [VOL] knob to select "OK".
Press the [VOL] knob.
The Folder Select mode releases, and the Audio
file in the folder being displayed plays.
•
The Folder Select does not function when <Disc
Random Play> (page 36) is ON.
Cancelling the Folder Select mode
Turn the [VOL] knob to select "EXIT".
Press the [VOL] knob.
2 Enter Folder Select mode
Turn the [VOL] knob to select "F.SEL".
Press the [VOL] knob.
During Select mode the folder information is
displayed as shown below.
|
36
English
Function of ACDrive disc
Function of the ACDrive disc
Switching the Play mode
Letter Seek
Arrange the playing orders of the songs by
categories.
You can search for the song, you want to play, by
selecting the initial of Genre name, Artist name,
or Album name.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"S.Mode" appears.
Refer to <Notes on Multi-function System> (page
9).
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"S.Mode" appears.
Refer to <Notes on Multi-function System> (page
9).
2 Select the Play mode
Turn the [VOL] knob to select "S.Mode".
Press the [VOL] knob.
Each time you press the button, the Play mode
alternates between the modes shown on the
table below.
2 Enter the Letter Seek mode
Turn the [VOL] knob to select "S.Mode".
Press the [VOL] knob for at least 1 second.
•
•
This operation does not function when <Disc Random
Play> (page 36) is ON.
This function is available only when the Play mode is
set Genre, Artist, or Album.
The Play mode indicator is ON.
Play mode
Category which is to be arranged
"PlayList Mode" Play list order.
"Genre Mode" By genre.
Cancelling the Letter Seek
Press the [VOL] knob.
"Artist Mode"
By artist.
"Album Mode" By album.
3 Start the Letter Seek
"Folder Mode" By the folder recorded in Disc.
Push the Control knob towards [4] or
[¢].
The initial of Genre name, Artist name, or Album
name is displayed and announced in order.
•
The category information of each song is the data
registered in Media Manager when ACDrive disc is
being generated.
•
•
You can cancel the announcement made when the
mode is changed by <Voice Index> (page 51).
You can select the advancement of the Play mode
information by [AM] and [FM] keys.
•
•
The announcement of the initial can be canceled by
<Voice Index> (page51).
When you push the Control knob to the reverse [4]
or [¢] during Letter Seek, the initial is displayed
and announced in the reversed order.
•
Once Letter Seek starts, it cannot be cancelled.
4 Select the song to play
Press the Control knob when the initial of
the song you are searching is displayed and
announced.
The selected initial group plays.
Text/Title Scroll
Scrolling the displayed CD text, Audio file text, or
MD title.
Push the Control knob toward [FM] for at
least 1 second.
English
|
37
SIRIUS tuner control features
NEXT
VOL
AUTO
SRC
Control knob
Band display
Channel number
1
2
3
4
5
6
SIRIUS
SR1-1ch
CH-200
ChanneName
Categoy Name
Preset station number
Select SIRIUS Satellite Radio Mode
Switching Seek Mode
Selecting the SIRIUS Satellite Radio Tuner
(optional accessory) connected to this unit.
Sets the seeking mode.
Press the [AUTO] button.
Each time you press the button, the Seek mode
alternates between the operations shown in the
table below.
Selecting SIRIUS Mode
Press the [SRC] button.
Select the "SIRIUS" display.
Display
Operation
"Seek Mode: Channel" Normal manual seeking control.
"Seek Mode: Preset" Search in order of the channels in the Preset
memory.
•
You need to subscribe to SIRIUS to receive the service
by SIRIUS Satellite Radio. Consult SIRIUS if "CALL 888-
539-SIRIUS TO SUBSCRIBE" appears.
•
•
The radio may take a little time to start receiving after
you select the SIRIUS source.
If the signal reception fails, "Acquiring Signal" appears.
Select the channel
Selecting the channel.
Push the Control knob towards [4] or
[¢].
|
38
English
Category and Channel Search
Selecting the channel and category you want to
receive.
•
If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
You can set up until Channel number 223.
If there is no signal in the input Channel, "No Channel"
appears. (KTC-SR901: optional accessory)
•
•
1 Enter Category and Channel Search mode
Press the Control knob.
•
•
You cannot search for a channel number which is not
broadcasting.
(KTC-SR902/KTC-SR903: optional accessory)
If you cannot receive any signal in the input Channel
due to bad conditions on radio wave or other such
problems, "Acquiring Signal" appears.
•
It takes several seconds until categories appear.
2 Select the Category
Push the Control knob towards [FM] or [AM].
Show the category you want to select in the
second row. In the first and third rows, show the
categories preceding and following the category
you want to select.
3 Select the Channel
Push the Control knob towards [4] or
[¢].
Selecting the Preset Band
Push the Control knob toward [FM].
Each time you push the knob, the preset band
alternates between the SR1, SR2, SR3 and SR4.
•
You cannot Channel search until the category
information is acquired.
Cancelling Category and Channel Search
mode
Press the Control knob.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
2 Enter the channel
Press the number buttons.
3 Do Channel Search
Push the Control knob towards [4] or
[¢].
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
English
|
39
SIRIUS tuner control features
Channel Preset Memory
Preset Tuning
Putting the channel in the memory.
Recalling the channels in the memory.
1 Select the preset band
Push the Control knob toward [FM].
1 Select the preset band
Push the Control knob toward [FM].
2 Select the channel to put in the memory
Push the Control knob towards [4] or
[¢].
2 Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to <Notes on Multi-function System> (page
9).
3 Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to <Notes on Multi-function System> (page
9).
3 Select a preset number
Turn the [VOL] knob.
4 Recall the channel
Press the [VOL] knob.
4 Select a preset number
Turn the [VOL] knob.
5 Put the channel in the memory
Press the [VOL] knob for at least 2 seconds.
The preset number display blinks 1 time.
On each band, you can put 1 channel in the
memory on each [1] — [6] number.
Channel Scan
Checks every receivable Channel for 10 seconds.
1 Start Channel Scan
Press the [AUTO] button for at least 2
seconds.
•
Only the channel number is stored. Category
information is not stored.
The channel number display blinks.
2 Release the button when the song you want
to hear is received
Press the [AUTO] button for at least 2
seconds.
Text Scroll for SIRIUS tuner source
Scrolls the displayed channel name and other
items.
Hold down on [FM] of the Control knob for at
least 1 second.
|
40
English
HD Radio control features
SRC
Control knob
Band display
Frequency display
1
2
3
4
5
6
HD Radio
HF1-1ch 107.7 MHz
Station Name
Title
Preset station number
ST indicator
Tuning
Selecting the station.
•
•
When you connect an HD Radio, Tuner features of
the unit are disabled and changed to HD Radio tuner
features. A portion of the setting methods including
the Tuning Mode will change.
With the HD Radio tuner, you can use the similar
functions to <Station Preset Memory>, <Auto
Memory Entry>, and <Preset Tuning> of Tuner
features. Refer to Tuner features for how to use the
functions.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD Radio" display.
2 Select the HD FM band
Push the Control knob toward [FM].
Each time you push the knob to [FM], the band
alternates between the HF1, HF2, and HF3 bands.
Select the HD AM band
Push the Control knob toward [AM].
3 Tune up or down band
Push the Control knob towards [4] or
[¢].
English
|
41
DAB tuner control features
NEXT
VOL
AUTO
SRC
Control knob
Frequency display
Band display
ST indicator
1
2
3
4
5
6
DAB
DB1-1ch 1472.000MHz
Service Label
Dynamic Label
Preset station number
About DAB Tuner control
4 Select a preset number
Turn the [VOL] knob.
Refer to A*1*2*3*4 group on the Instruction manual
of DAB Tuner KTC-9090DAB (optional accessory) for
the control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be differed from the
Instruction manual; therefore, refer to the following
supplemental instruction.
5 Put the service in the memory
Press the [VOL] knob for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 service can be put in the
memory on each [1] — [6] number.
Service Preset Memory
Recalling a Preset Service
Recalling the services in the memory.
1 Select the preset band
1 Select the preset band
Push the Control knob toward [FM].
Push the Control knob toward [FM].
Each time you press the button, the preset band
switches between DB1, DB2, and DB3.
2 Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to <Notes on Multi-function System> (page
9).
2 Receive the service to be preset.
3 Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
3 Select a preset number
Turn the [VOL] knob.
— "6" appears.
Refer to <Notes on Multi-function System> (page
9).
|
42
English
4 Recall the service
2 Selecting a language
Press the [VOL] knob.
Push the Control knob towards [FM] or [AM].
As for the available languages, refer to the
instruction manual of DAB tuner for <Language
Filter Search Mode>.
Program Type (PTY) Function
3 Searching by the selected program type and
language
Push the Control knob towards [4] or
[¢].
This function permits desired program types from
within the received Ensemble to be searched and
monitored.
4 Exiting: Press the [AUTO] button.
1 Enter PTY Mode
Press the Control knob.
"PTY Select" is displayed.
Languages to be displayed
Select English, French, German, Dutch, Spanish,
Portuguese, Norwegian or Swedish in <Language
Filter Search Mode> to display in the selected
language. (Refer to the instruction manual of
DAB tuner)
•
This function cannot be used during the interruption
of the announcement/ PTY Watch.
2 Select the program type
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the program type
changes.
Refer to the instruction manual of DAB tuner for
<Program Type Display>.
Program Type preset
Putting the Program Type in the Preset memory
and quick recall.
3 Search a service of the selected program
type
Push the Control knob towards [4] or
[¢].
When you want to search for other service, push
[4] or [¢] of the Control knob again.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <Program Type (PTY) Function> (page
43).
2 Select a preset number
Turn the [VOL] knob.
•
If the selected program type is not found, the
message ("No PTY", etc.) is displayed.
When searching for a service of another program type,
repeat procedures 2 and 3.
3 Preset the Program Type
Press the [VOL] knob for at least 2 seconds.
Switching to Another Service:
Repeat procedure 3.
Another service of the same program type will
be searched.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <Program Type (PTY) Function> (page
43).
Cancelling Search In the Middle:
Press the Control knob.
2 Select a preset number
Turn the [VOL] knob.
Searching by program type and
language
3 Recall the Program Type
Press the [VOL] knob.
1 Press the button while in program type
selection mode.
Press the [AUTO] button.
English
|
43
Menu system
VOL
MENU
SRC
Control knob
setting other items.
Menu System
4 Exit Menu mode
Press the [MENU] button.
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
•
When other items --those applicable to the basic
operation method above--are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
(<Manual Clock Adjustment> etc.) are entered step
by step.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Push the Control knob towards [4] or
[¢].
Example: When you want to set the beep sound
select the "Beep" display.
In Standby mode
Security Code
Because authorization by the Security Code is
required when the audio unit is removed from
the vehicle, personalizing this unit by using the
Security Code is helpful in preventing theft.
3 Set the menu item
Push the Control knob towards [FM] or [AM].
Example: When you select "Beep", each time you
push the knob it alternates between
"Beep: ON" or "Beep: OFF". Select 1 of
them as the setting.
•
Setup Security Code when the <Demonstration mode
Setting> (page 52) is set as OFF.
You can continue by returning to step 2 and
|
44
English
•
When you activate the Security Code function, the code
cannot be changed and the function cannot be released.
Note, you can set the Security Code with a 4 digit
number of your choice.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
Display
"Beep: ON"
"Beep: OFF"
Setting
Beep is heard.
Beep canceled.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is also
displayed.
In Standby mode
3 Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "CODE" is also
displayed.
Manual Clock Adjustment
•
You can do this adjustment when the <Synchronize
Clock> (page 46) is set as OFF.
4 Select the digits to enter
Push the Control knob towards [4] or
[¢].
1 Select Clock Adjustment mode
Push the Control knob towards [4] or
[¢].
5 Select the Security Code numbers
Push the Control knob towards [FM] or [AM].
Select the "Clock Adjust" display.
6 Repeat steps 4 and 5, and complete the
2 Enter Clock Adjust mode
Security Code.
Press the Control knob for at least 1 second.
The clock display blinks.
7 Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "CODE" is also
displayed.
3 Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
8 Do the step 4 through 7 operation, and
reenter the Security Code.
"Appoved" is displayed.
Push the Control knob towards [4] or
[¢].
4 Exit Clock adjustment mode
Press the [MENU] button.
The Security Code function activates.
•
If you enter the wrong Code in steps 4 through 6,
repeat from step 4.
9 Exit Security Code mode
Press the [MENU] button.
Press the Reset button when the audio unit is
removed from the battery power source
1 Turn the power ON.
2 Do the step 4 through 7 operation, and enter
the Security Code.
"Appoved" is displayed.
You can being using the unit.
English
|
45
Menu system
In Standby mode
In Standby mode
Date Adjustment
Synchronize Clock
Synchronizing the RDS station time data and this
unit’s clock.
1 Select Date Adjust mode
Push the Control knob towards [4] or
[¢].
Display
Setting
Select the "Date Adjust" display.
"SYNC: OFF"
"SYNC: ON"
Adjust the time manually.
Synchronizes the time.
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
•
It takes 3 to 4 minutes to synchronize the clock.
3 Selecting the item (day, month, or year) to
adjust
Push the Control knob towards [4] or
[¢].
In Standby mode
The items that are blinking are items that you
can adjust.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
4 Adjust each item
Push the Control knob towards [FM] or [AM].
Display
"DSI: ON"
"DSI: OFF"
Setting
LED flashes.
LED OFF.
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [MENU] button.
In Standby mode
Selectable Illumination
In Standby mode
Date Mode
Selecting the button illumination color as green
or red.
Setting the date format.
Display
"Button: Red"
"Button: Green"
Setting
The illumination color is red.
The illumination color is green.
1 Select Date Mode
Push the Control knob towards [4] or
[¢].
Select the "Date Mode" display.
2 Select the date format
Push the Control knob towards [FM] or [AM].
•
You can change the illumination color of [EJECT],
[NEXT], [AUTO], and [ATT] buttons.
3 Exit Menu mode
Press the [MENU] button.
In Standby mode
Dimmer
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display
Setting
"Dimmer: ON"
"Dimmer: OFF"
The display dims.
The display doesn’t dim.
|
46
English
In Standby mode
In Standby mode
Contrast Adjustment
G-Counter Level set
Adjusting the display contrast.
Calibrating G-Point. Setting the level according to
the kinds of vehicles.
Display and Setting
"Contrast: 1"
Display
Setting
"G-Counter: Level 1"
"G-Counter: Level 2"
"G-Counter: Level 3"
Counter is easy to go up.
"Contrast: 4" (Original setting)
Counter is hard to go up.
In Standby mode
•
In the case of driving situations calling for few
accelerations, set the G-Point up to "G-Counter: Level
1". In the case of frequent accelerations, set it up to "G-
Counter: Level 3".
Display-reversing Setting
If no operation is performed for a predetermined
period of time, switching between negative and
positive display modes takes place automatically.
Display-reversing maintains the initial brightness
of the display for a long period of time.
In Standby mode
G-Analyzer Reset
Display
Setting
"Display N/P: Auto"
"Display N/P: POSI"
Auto reverse display
Positive display only
Resets the value of G-Meter and G-Counter.
1 Select G-Analyzer Reset mode
Push the Control knob towards [4] or
[¢].
•
Switching between negative and positive display may
not take place depending on the displayed mode.
Select the "G-Reset" display.
2 Enter G-Analyzer Reset mode
Press the Control knob for at least 1 second.
In Standby mode
3 Select the Reset item
Push the Control knob towards [FM] or [AM].
"G-Meter Reset": Reset the value of G-Meter.
"G-Counter Reset": Reset the value of G-Counter.
Built-in Amp Setting
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
4 Reset the value
Press the Control knob for at least 2 seconds.
"Reset OK" is displayed.
Display
"AMP: ON"
"AMP: OFF"
Setting
The built-in amplifier activates.
The built-in amplifier deactivates.
5 Exit G-Analyzer Reset mode
Press the [MENU] button.
English
|
47
Menu system
In Standby mode
Select the "Stop Watch" display.
G-Analyzer Calibration setup
2 Enter G-Analyzer Stop Watch mode
Press the Control knob for at least 1 second.
"Stop" is displayed.
G-Analyzer requires calibration for horizontal
acceleration and braking.
3 Enter Counter Ready mode
Press the Control knob.
"Ready" is displayed.
•
Detection of horizontal and straight directions should
be done at horizontal location going straight.
4 Start Count
1 Park the vehicle in a horizontal location
When G in the vertical direction is detected
during the travel, the count automatically starts.
"Running" is displayed.
2 Select G-Analyzer Calibration setup mode
Push the Control knob towards [4] or
[¢].
Select the "G-Calibration" display.
•
You can also start the counter by pressing the Control
knob.
3 Enter G-Analyzer Calibration setup mode
Press the Control knob for at least 1 second.
"Stop" is displayed.
5 Stop Count
Press the Control knob.
"Stop" is displayed.
4 Start Calibration of horizontal direction
Press the Control knob.
Once "Move Forward" appears on the display, the
vehicle must be advanced.
•
The control will start again when you accelerate or
press the Control knob.
Do the operation after step3.
5 Start Calibration of straight direction
When the vehicle is driven in the straight
direction, calibration of straight direction
automatically starts.
When you Reset the Count
(While "Stop" is displayed)
Press the Control knob for at least 2 seconds.
•
In order to operate the detection of straight direction.
•
You can reset of count when the count is stopped.
When the Calibration is finished, "Calibration OK"
is displayed.
6 Exit G-Analyzer Stop Watch mode
Press the [MENU] button.
•
If you fail to complete the calibraton, "No Calibration"
is displayed. In such a case, repeat steps 1 thru 6.
•
•
When "Running" is displayed (counted), the count is
continued even though G-Analyzer Stop Watch mode
is finished. If you want to stop the count, enter the
menu mode then press the control knob.
When Power off (ex; ACC OFF) while counting, the
value of 1 second or less will be "00".
6 Exit G-Analyzer Calibration setup mode
Press the [MENU] button.
G-Analyzer Stop Watch
The control of stop watch can be started by G-
Analyzer function.
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
•
Do not use G-Analyzer stop watch on the Public roads.
Setting the Front channel and Rear channel
sound in the Dual Zone System.
1 Select G-Analyzer Stop Watch mode
Push the Control knob towards [4] or
[¢].
|
48
English
Display
Setting
"Zone2: Rear"
Sub source (Auxiliary input source) is to be rear
channel.
•
Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned
ON. In such a situation, turn it OFF.
"Zone2: Front" Sub source (Auxiliary input source) is to be front
channel.
In HD Radio mode
Traffic Information
Receive mode Setting
Switching to traffic information automatically
when a traffic bulletin starts even when you aren’t
listening to the radio.
Sets the receive mode.
1 Select the Receive mode
Push the Control knob towards [4] or
[¢].
Display
"TI: OFF"
"TI: ON"
Setting
The Traffic Information function is OFF.
The Traffic Information function is ON.
Select the "Receive Mode" display.
2 Enter Receive mode
Press the Control knob for at least 1 second.
When a traffic bulletin starts, "Traffic INFO" is
displayed it and it switches to traffic information.
3 Set the Receive mode
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the Receive mode
alternates between the modes shown in the
table below.
•
•
During reception of an AM station when the Traffic
Information function is turned ON, it switches to an
FM station.
During reception of traffic information the adjusted
volume is automatically remembered, and the next
time it switches to traffic information it’s automatically
the remembered volume.
Receive mode Display
Operation
Auto mode
"Auto"
Analog broadcasts and digital
broadcasts will be switched
automatically.
Receiving other traffic information stations
(In tuner source)
Push the Control knob towards [4] or
[¢].
When both are being transmitted,
the digital broadcast will have
priority.
Digital
Analog
"Digital"
"Analog"
Digital broadcasts only.
Analog broadcasts only.
•
You can change the traffic information station when
listening to the radio.
4 Exit Receive mode
Press the [MENU] button.
•
Even if the Receive mode is set to "Auto", when the
Ball game mode program (non-delayed broadcast
program) is received, the Receive mode will
automatically switch to Analog broadcast only.
In FM reception
CRSC (Clean Reception System
Circuit)
Temporarily have reception alternate from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Display
Setting
"CRSC: ON"
"CRSC: OFF"
The CRSC is ON.
The CRSC is OFF.
English
|
49
Menu system
In SIRIUS tuner source
6 Exit Menu mode
Press the [MENU] button.
SIRIUS ID (ESN) display
Displaying the SIRIUS ID (Electronic Serial
Number)
•
•
When operation stops for 10 seconds, the name at
that time is registered, and the Menu mode closes.
The Auxiliary Input Display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S210A is used.
Display
"ESN = ************"
•
Serial & SIRIUS ID (ESN)
It is important to retain the unit serial number and
the electronic SIRIUS Identification number for service
activation and potential service changes.
Text Scroll
Setting the displayed text scroll.
Display
Setting
"Scroll: Auto"
"Scroll: Manual"
Repeats scroll.
Scrolls when the display changes.
Auxiliary Input Display Setting &
Station/Disc Naming
Selecting the display when changing to Auxiliary
input source. For the Station/Disc Naming refer to
the <Station/Disc Naming (SNPS/DNPS)> (page
28).
•
The text scrolled is listed below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
1 Select Auxiliary input source
Press the [SRC] button.
Select the "AUX"/ "AUX EXT" display.
- MD title
- Radio text
- Text for the SIRIUS tuner source, including Channel
name, etc.
- Title for HD Radio source
- Dynamic Lable for the DAB tuner source
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3 Select Auxiliary input display setting mode
Push the Control knob towards [4] or
[¢].
In Standby mode
Built-in Auxiliary input Setting
Select the "Name Set" display.
Set the Built-in Auxiliary Input function.
4 Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
Display
Setting
"Built in AUX: OFF" When selecting the source there’s no Auxiliary
Input.
"Built in AUX: ON" When selecting the source there’s Auxiliary Input.
5 Select the Auxiliary input display
Push the Control knob towards [4] or
[¢].
Each time you press the button, the display
alternates as listed below.
• "AUX"/ "AUX EXT"
• "DVD"
• "Portable"
• "Game"
• "Video"
• "TV"
|
50
English
In Standby mode
When the downloading finishes, "Finished
Download" is displayed.
CD Read Setting
When there is a problem with playing a CD with
special format, this setting plays the CD by force.
•
Picture downloading may take as long as 20 minutes.
Quantity Gradation Level
Display
Setting
"CD Read: 1"
"CD Read: 2"
Play CD and Audio file.
Play CD by force.
•
Setting "CD Read: 2" cannot play Audio file.
Some music CDs may not play even in the "CD Read:
2" mode.
Cancelling Downloading
Press the [MENU] button.
8 Exit the downloading mode
Press the [MENU] button.
In Standby mode
Picture downloading
•
•
•
Do not operate this unit,while "Downloading" is
displayed to prevent data from being damaged.
The number of files that can be downloaded.
- Wallpaper: 1 file
When a new wallpaper is downloaded, it will
overwritte the currently downloaded wallpaper.
There is no way to delete the downloaded pictures.
The downloaded pictures can be used for display.
<Graphic part/ Spectrum Analyzer Display Switching>
(page 18)
Downloading wallpapers. You can use
downloaded pictures for the display of this unit.
1 Inset a CD-R/CD-RW.
Insert a CD-R/CD-RW containing files to be
downloaded into this unit.
Refer to <Playing CD & Audio file> (page 33) for
details.
Our URL http://www.kenwood.net-disp.com
describes how to make CD-R/CD-RW.
•
•
<Wallpaper selecting> (page 19)
When you cannot download the pictures to this unit,
there may be a problem with the CD-R/CD-RW write
method.
and rewrite the CD-R/CD-RW.
2 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
3 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
4 Select the downloading mode
Push the Control knob towards [4] or
[¢].
Function of ACDrive disc
Voice Index
Select the "DISP Data Download" display.
Setting the announcement during the play of
ACDrive disc.
5 Enter the downloading mode
Press the Control knob for at least 1 second.
"File Check!!" is displayed.
Display
Setting
"Voice Index: ON"
"Voice Index: OFF"
Guide is announced.
Not be announced.
6 Select files to be downloaded
Push the Control knob towards [4] or
[¢].
7 Start downloading
Press the Control knob for at least 1 second.
"Downloading" is displayed.
English
|
51
Menu system
In CD mode
In DAB mode
ACDrive firmware version display
Menu Added for DAB
Displaying the firmware version with the ACDrive
function.
When you connect the DAB tuner, the following
menu is displayed:
1 Select the firmware version display mode
Push the Control knob towards [4] or
[¢].
Display
"DRC:"
"Regional ASW:"
"ASW Select"
"PTY Watch"
"Language Search"
Feature
Dynamic Range Control (DRC)
Regional Announcement Function
Announcement select mode
PTY Watch Select Mode
Language Filter Search Mode
Select the "ACD F/W Version" display.
2 Display the ACDrive firmware version
Push the Control knob towards [FM] or [AM].
•
For details on menu items, refer to the instruction
manual of the DAB tuner.
In CD mode
Unique ID display
Displaying the serial number for each product.
1 Select the unique ID display mode
Push the Control knob towards [4] or
[¢].
Select the "ACD Unique ID" display.
2 Display the unique ID
Push the Control knob towards [FM] or [AM].
In Standby mode
Demonstration mode Setting
Sets the demonstration mode.
1 Select the Demonstration mode
Push the Control knob towards [4] or
[¢].
Select the "DEMO Mode" display.
2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display
Setting
"DEMO Mode: ON"
"DEMO Mode: OFF"
The Demonstration mode function is ON.
Exit Demonstration mode (Normal mode).
|
52
English
Basic Operations of remote control
43$
"55
70-
32#
!4 4
6/,
ꢀꢁ
!5$
"6%
ꢀꢁ
&-ꢄ
ꢂ
D
ꢂꢀD
!-n
ꢁꢂ:/.%
!"#
'.ꢀ".ꢀꢁꢀo
$)2%#4
ꢀ/+
%*3&$5
$%&
-./
789
'()
*+,
023
456
1:
2ꢃ6/,
Loading and Replacing the battery
Basic operations
Use two "AA"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
[VOL] buttons
Adjusts the volume.
[SRC] button
Each time you press the button, the source
alternates.
For the source alternating order refer to
<Selecting the Source> (page 10).
[ATT] button
Turns the volume down quickly.
When the button is pressed again, the volume
returns to the previous level.
[
] button
Adjusts the Faceplate Angle.
2WARNING
•
•
Store unused batteries out of the reach of children.
Contact a doctor immediately if the battery is
accidentally swallowed.
Do not set the remote control in hot places such as
above the dashboard.
English
|
53
Basic Operations of remote control
Audio Control
In Disc source
[AUD] button
Selects the Audio item to be adjusted.
[4]/ [¢] buttons
Going forwards and backwards between track/
files.
[VOL] buttons
Adjusts the Audio item.
[+]/ [–] buttons
Going forwards and backwards between disc/
folders.
•
•
Refer to <Audio Control> (page 11) for the operation
method, such as the procedures for Audio control and
others operations.
The remote control can only select and adjust the
Basic Audio item. Selecting and adjusting of the Detail
Audio item cannot be done.
[38] button
Each time you press the button, the song pauses
or plays.
[0] — [9] buttons
When in <Direct Track/File Search> (page 34) and
<Direct Disc Search> (page 34), enters the track/
file/disc number.
Dual Zone System
[2-ZONE] button
Each time you press the button, "2ZONE" of
<Audio Setup> (page 11) is turned ON or OFF.
In SIRIUS tuner source
[FM] button
Selects the preset band.
[5]/ [∞] buttons
Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone
System is ON.
[4]/ [¢] buttons
Searches up or down channels.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset channels.
[DIRECT] button
In Tuner source
Enters and cancels the <Direct Access Tuning>
(page 39) mode.
[FM]/ [AM] buttons
Selects the band.
[38] button
Enters and cancels the <Category and Channel
Search> (page 39) mode.
Each time you press the [FM] button, the band
alternates between the FM1, FM2, and FM3
bands.
[4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the <Direct Access Tuning>
(page 30) mode.
[38] button
Enters and cancels the <PTY (Program Type)>
(page 32) mode.
|
54
English
In HD Radio source
[FM] button
Selects the HD FM band.
Each time you press the [FM] button, the band
alternates between the HF1, HF2, and HF3 bands.
[AM] button
Selects the HD AM band.
[4]/ [¢] buttons
Tunes up or down bands.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
In DAB source
[FM] button
Preset Band Switching.
Each press of the [FM] button switches one step
among the DB1, DB2, and DB3 bands.
[AM] button
Primary/Secondary Switching.
Each press of the [AM] button switches between
Primary/secondary within the services.
[4]/ [¢] buttons
Service Switching.
Each press of the button switches the services
from within the Ensemble.
Switching the ensemble.
Each time the button is pressed and held for
longer than 1 seconds, the Ensemble changes.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset services.
English
|
55
Accessories/ Installation Procedure
Accessories
2WARNING
If you connect the ignition wire (red) and the battery wire
(yellow) to the car chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always connect the
ignition and battery wires to the power source running
through the fuse box.
1
..........1
..........2
..........4
..........4
..........1
•
If the power is not turned ON (or it is ON, but will be OFF
immediately), the speaker wire may have a short-circuit
or touched the chasis of the vehicle and the protection
function may have been activated. Therefore, check the
speaker wire.
If your car’s ignition does not have an ACC position,
connect the ignition wires to a power source that can be
turned on and off with the ignition key. If you connect
the ignition wire to a power source with a constant
voltage supply, as with battery wires, the battery may die.
If the console has a lid, make sure to install the unit so
that the faceplate will not hit the lid when closing and
opening.
If the fuse blows, first make sure the wires aren’t touching
to cause a short circuit, then replace the old fuse with
one with the same rating.
Insulate unconnected wires with vinyl tape or other
similar material. To prevent a short circuit, do not remove
the caps on the ends of the unconnected wires or the
terminals.
Connect the speaker wires correctly to the terminals to
which they correspond. The unit may be damaged or fail
to work if you share the - wires or ground them to any
metal part in the car.
When only two speakers are being connected to the
system, connect the connectors either to both the front
output terminals or to both the rear output terminals
(do not mix front and rear). For example, if you connect
the + connector of the left speaker to a front output
terminal, do not connect the - connector to a rear
output terminal.
2
3
4
5
•
•
•
•
•
•
•
•
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
Mount the unit so that the mounting angle is 30° or less.
Installation Procedure
1. To prevent a short circuit, remove the key from
the ignition and disconnect the - battery.
2. Connect the proper input and output wire to
each unit.
3. Connect the speaker wires of the wiring harness.
4. Connect the wiring harness wires in the
following order: ground, battery, ignition.
5. Connect the wiring harness connector to the
unit.
6. Install the unit in your car.
7. Reconnect the - battery.
8. Press the reset button.
|
56
English
Connecting Wires to Terminals
Subwoofer right output (Red)
Subwoofer left output (White)
-1
7""ꢀꢂ,
Rear right output (Red)
Rear left output (White)
Front right output (Red)
Front left output (White)
,ꢂꢃ,
To KENWOOD disc changer/
External optional accessory
ꢀ," /
To connect these leads, refer to the
relevant instruction manuals.
AUX right input (Red)
AUX left input (White)
ꢃ18Êꢄ
Wiring harness
(Accessory1)
FM/AM antenna input
Fuse (10A)
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier, connect to its power
*°ꢁ" /
control terminal.
Power control wire (Blue/White)
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal for
the booster amplifier of the film-type antenna.
ꢀ /°
ÊÊÊꢁ" /
Motor antenna control wire
(Blue)
Connect to the terminal that is grounded when either the telephone
rings or during conversation.
Êꢂ1/ꢃ
TEL mute wire (Brown)
To connect the KENWOOD navigation system, consult your
navigation manual.
To car light control switch
To front left speaker
Dimmer control wire
(Orange / White)
White/Black
White
ꢀ," /ÊUÊꢁ
To front right speaker
Gray/Black
Gray
ꢀ," /ÊUÊ,
,ꢂꢃ,ÊUÊꢁ
,ꢂꢃ,ÊUÊ,
Green/Black
Green
To rear left speaker
To rear right speaker
Purple/Black
Purple
Ignition key
switch
Car fuse box
ACC
Ignition wire (Red)
Car fuse box
(Main fuse)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
q
³
Battery
English
|
57
Installation
non-Japanese cars
Japanese cars
1 Refer to the section <Removing the hard rubber
frame> (page 60) and then remove the hard
rubber frame.
2 Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and
secure the unit with the accessory screws.
Metal mounting strap
(commercially available)
Firewall or metal support
T
N
T/N
T
N
Bend the tabs of the
T: Toyota cars
N: Nissan cars
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
8 mm
MAX.
Self-tapping screw
(commercially available)
8 mm
MAX.
3
4
M5mm
M5mm
Screw (M4X8)
(commercially available)
Accessory3 ...for Nissan car
Accessory4 ...for Toyota car
•
Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (for example, the
sound may skip).
•
•
During installation, do not use any screws except for
those provided. The use of different screws might result
in damage to the main unit.
Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
|
58
English
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main
unit so that it does not fall off, screw in the
provided screws in the holes shown below.
Bottom panel
Accessory5
•
Never insert the screw in any other screw hole than the
one specified. If you screw them in another hole, it will
contact and may cause damage to the mechanical parts
inside the unit.
English
|
59
Removing the Unit
Removing the hard rubber frame
Removing the Unit
1 Engage the catch pins on the removal tool and
remove the two locks on the upper level.
Upper the frame and pull it forward as shown in
the figure.
1 Refer to the section <Removing the hard rubber
frame> (page 60) and then remove the hard
rubber frame.
2 Remove the screw (M4 × 8) on the back panel.
3 Insert the two removal tools deeply into the slots
on each side, as shown.
Screw (M4X8)
(commercially available)
Lock
Catch
Accessory2
Removal tool
2 When the upper level is removed, remove the
lower two locations.
Accessory2
Removal tool
4 Lower the removal tool toward the bottom, and
pull out the unit halfway while pressing towards
the inside.
•
The frame can be removed from the bottom side in the
same manner.
•
Be careful to avoid injury from the catch pins on the
removal tool.
5 Pull the unit all the way out with your hands,
being careful not to drop it.
|
60
English
Troubleshooting Guide
What may seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
? No sound can be heard, or the volume is low.
✔
The fader or balance settings are set all the way to
one side.
☞
Center the fader and balance settings.
✔
The input/output wires or wiring harness are
connected incorrectly.
☞
Reconnect the input/output wires or the
wiring harness correctly. See the section on
<Connecting Wires to Terminals>.
General
? The power does not turn ON.
✔
The fuse has blown.
✔
✔
The values of Volume offset are low.
☞
☞
After checking for short circuits in the wires,
replace the fuse with a new one with the
same rating.
Turn up the Volume offset, referring to the
section on <Audio Control> (page 11).
The <Built-in Amp Setting> (page 47) is OFF.
Turn it ON.
✔
The speaker wire has a short-circuit or touches the
chassis of the vehicle, and the protection function
is activated.
☞
? The sound quality is poor or distorted.
✔
One of the speaker wires is being pinched by a
screw in the car.
☞
Wire or insulate the speaker cable properly
and press the reset button.
☞
Check the speaker wiring.
? There is a source you cannot change.
✔
The speakers are not wired correctly.
☞
✔
There is no media inserted.
Reconnect the speaker wires so that each
output terminal is connected to a different
speaker.
☞
Set the media you want to hear. If there is no
media in this unit, you cannot change to each
source.
? The Touch Sensor Tone does not sound.
The preout jack is being used.
✔
The Disc changer is not connected.
✔
☞
Connect the Disc changer. If the Disc changer
is not connected to it’s input terminal, You
cannot change to an external disc source.
☞
The Touch Sensor Tone cannot be output from
the preout jack.
? Even though Synchronize Clock is ON, the clock
cannot be adjusted.
? The memory is erased when the ignition is
turned OFF.
✔
The received RDS station is not sending time data.
✔
The ignition and battery wire are incorrectly
☞
Receive another RDS station.
connected.
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
? The Dimmer function does not work.
✔
The Dimmer wire is not connected correctly.
Check the Dimmer wire connection.
The <Dimmer> (page 46) is OFF.
Turn it ON.
☞
? The TEL mute function does not work.
The TEL mute wire is not connected properly.
✔
✔
☞
☞
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
? The sound is not output from Subwoofer or it
outputs a different sound.
? The TEL mute function turns ON even though the
TEL mute wire is not connected.
✔
When "2ZONE" of <Audio Setup> (page11) is set
to ON.
✔
The TEL mute wire is touching a metal part of the
car.
☞
☞
Turn OFF "2ZONE" of <Audio Setup>.
Pull the TEL mute wire away from the metal
part of the car.
? There are no audio control effects.
✔
FOCUS/ SRS 3D item on <WOW Control> (page
15) have no effect in rear output.
☞
---
? Switching between negative and positive display
modes takes place automatically.
✔
Switching between negative and positive display
modes takes place automatically to maintain the
initial brightness of the display for a long period of
time.
☞
You can select "Display N/P: POSI" as
mentioned in <Display-reversing Setting>
(page 47).
English
|
61
Troubleshooting Guide
Tuner source
? The disc will not insert.
There is already another disc inserted.
Press the [0] button and remove the disc.
✔
? Radio reception is poor.
☞
✔
The car antenna is not extended.
☞
Pull the antenna out all the way.
? Direct Search cannot be done.
Another function is ON.
Turn Random Play or other functions OFF.
✔
The antenna control wire is not connected.
☞
✔
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>.
☞
? Track Search cannot be done.
For the discs first or last song.
? The desired frequency cannot be entered with
the Direct Access Tuning.
✔
☞
For each disc, Track Search cannot be done in
the backward direction for the first song or in
the forward direction for the last song.
✔
A station that cannot be received is being entered.
☞
You are trying to enter a frequency with a 0.01
MHz unit.
☞
Enter a station that can be received.
✔
Audio file source
The FM band is designated to 0.1 MHz.
? Cannot play an Audio file.
? The volume is not the set Traffic information
sound volume.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
✔
The set sound volume is less than the tuner sound
volume.
☞
If the tuner sound volume is louder than the
set sound volume,the tuner sound volume is
used.
? The sound skips when an Audio file is being
played.
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning
of the section on <About CDs> (page 7).
Disc source
✔
The recording condition is bad.
Record the media again or use another media.
? "AUX EXT" is displayed without achieving
☞
External disc control mode.
? The Audio file track time is not displayed
correctly.
✔
✔
Unsupported disc changer is connected.
☞
Use the disc changer mentioned in the
<About CD players/disc changers connected
to this unit> (page 4) of the section on <Safety
precautions>.
---
☞
There are times when the track time is not
displayed correctly according to the Audio file
recording conditions.
? The specified disc does not play, but another one
plays instead.
HD Radio source
✔
The specified CD is quite dirty.
☞
Clean the CD.
? No sound can be heard, or the volume is low.
✔
The disc is loaded in a different slot from that
specified.
☞
✔
The preset broadcast station is not transmitting
in the mode that was set with <Receive mode
Setting> (page 49).
Eject the disc magazine and check the
number for the specified disc.
☞
Please set <Receive mode Setting> to "Auto".
✔
The disc is severely scratched.
Try another disc instead.
✔
In digital AM broadcasting, receive mode
alternates between stereo and monaural too
often.
☞
? A CD ejects as soon as it is loaded.
The CD is quite dirty.
☞
Receiving condition is bad or unstable. Stereo
is chosen when receiving condition is good,
and the tuner alternates to monaural when
the condition becomes bad.
✔
☞
Clean the CD, referring to the CD cleaning of
the section on <About CDs> (page 7).
✔
HD Radio tuner is connected to KCA-S210A or
other units.
? Can’t remove disc.
The cause is that more than 10 minutes has
✔
☞
Connect the HD Radio tuner directly to the
control unit.
elapsed since the vehicle ACC switch was turned
OFF.
☞
The disc can only be removed within 10
minutes of the ACC switch being turned OFF.
If more than 10 minutes has elapsed, turn
the ACC switch ON again and press the Eject
button.
|
62
English
Waiting:
• Receiving radio text data.
• Text for the SIRIUS tuner source is being
received.
The messages shown below display your
systems condition.
• Text for the DAB tuner source is being
received.
Eject:
No disc magazine has been loaded in
the changer. The disc magazine is not
completely loaded.
➪ Load the disc magazine properly.
No CD in the unit.
Load:
Exchanging discs in the Disc changer.
Reading the data on the disc.
Reading:
IN (Blink):
➪ Insert the CD.
The CD player section is not operating
properly.
No Disc:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
TOC Error:
No disc has been loaded in the disc
magazine.
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-
down. The CD is very scratched.
➪ Clean the CD and load it correctly.
Unsupported File:
An Audio file with a format that this unit
cannot support is playing.
➪ ----
Error 05:
The CD is upside-down.
➪ Load the CD correctly.
Copy Protection:
A copy-protected file is playing.
➪ ----
Blank Disc:
Nothing has been recorded on the MD.
No Track Disc: No tracks are recorded on the MD,
although it has a title.
Can't Download:
Download Error:
This unit does not work properly for some
reason.
➪ Press the reset button to download
it again. If this error is still displayed,
consult a local Kenwood dealer.
Error 15:
Media was played that does not have data
recorded that the unit can play.
➪ Use media that has data recorded that
the unit can play.
No Panel:
Error 77:
The faceplate of the slave unit being
connected to this unit has been removed.
➪ Replace it.
No Display File: No file that can be downloaded is
contained in the CD-ROM.
➪ Make sure that a files created with
disp.com> is contained in the CD-ROM.
Do not delete the extension (.kbm)
created when the file was created.
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If
the "Error 77" code does not disappear,
consult your nearest service center.
Mecha Error: Something is wrong with the disc
magazine. Or the unit is malfunctioning for
some reason.
Incorrect File: The file selected to be downloaded has a
format that this unit cannot read.
➪ Recreate the file.
➪ Check the disc magazine. And then
press the reset button on the unit. If the
"Mecha Error" code does not disappear,
consult your nearest service center.
Writing Error: Writing failed while the file was
downloaded.
➪ Try the downloading again.
DEMO MODE: The Demonstration mode has been
selected.
Hold Error:
The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
➪ Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
➪ The <Demonstration mode Setting>
(page 52) is ON. Turn it OFF.
English
|
63
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range (200 kHz space)
: 87.9 MHz – 107.9 MHz
Maximum output power
: 50 W x 4
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 µV /75 Ω)
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 µV /75 Ω)
Tone action
Band1: 60 – 200 Hz 9 dB
Frequency response ( 3.0 dB)
Band2: 250 – 1k Hz 9 dB
Band3: 1.25k – 4k Hz 9 dB
Band4: 5k – 16k Hz 9 dB
Preout level / Load (during disc play)
: 5000 mV/10 kΩ
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 70 dB
Selectivity ( 400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 40 dB
Preout impedance
: ≤80 Ω
Auxiliary input
Frequency response ( 1 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
AM tuner section
Frequency range (10 kHz space)
: 530 kHz – 1700 kHz
Usable sensitivity (S/N = 20dB)
: 28 dBµ (25 µV)
Input Impedance
: 100 kΩ
CD player section
General
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 1 Bit
Spindle speed (Audio file)
: 1000 – 400 rpm (CLV 2times)
Wow & Flutter
: Below Measurable Limit
Frequency response ( 1 dB)
: 10 Hz – 20 kHz
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W × H × D)
: 182 × 50 × 155 mm
7-3/16 × 2-1/16 × 6-1/10 inch
Weight
: 3.64 lbs (1.65 kg)
Total harmonic distortion (1 kHz)
: 0.008 %
Signal to Noise ratio (1 kHz)
: 110 dB
Dynamic range
: 93 dB
Channel separation
: 96 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC ".m4a" files
|
64
English
|