JVC LVT1099 001A User Manual

CD/CASSETTE RECEIVER  
ПРИЕМНИК С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ  
И КАССЕТ  
KW-XC939  
ATT  
SOUND  
U
SOURCE  
D
R
F
VOL  
VOL  
В соответствии с Законом Российской Федерации “О защите прав  
потребителей” срок службы (годности) данного товара “по истечении которого  
он может представлять опасность для жизни, здоровья потребителя,  
причинять вред его имуществу или окружающей среде” составляет семь (7) лет  
со дня производства. Этот срок является временем, в течение которого  
потребитель данного товара может безопасно им пользоваться при условии  
соблюдения инструкции по эксплуатации данного товара, проводя  
необходимое обслуживание, включающее замену расходных материалов и/или  
соответствующее ремонтное обеспечение в специализированном сервисном  
центре.  
For installation and  
connections, refer to  
the separate manual.  
Указания по  
установке и  
выполнению  
соединений  
приводятся в  
отдельной  
инструкции.  
Дополнительные косметические материалы к данному товару,поставляемые  
вместе с ним, могут храниться в течение двух (2) лет со дня его производства.  
Срок службы (годности), кроме срока хранения дополнительных  
косметических материалов, упомянутых в предыдущих двух пунктах, не  
затрагивает никаких других прав потребителя, в частности, гарантийного  
свидетельства JVC, которое он может получить в соответствии с законом о  
правах потребителя или других законов, связанных с ним.  
INSTRUCTIONS  
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ  
LVT1099-001A  
[EE]  
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to  
ensure your complete understanding and to obtain the best possible performance from the unit.  
CONTENTS  
How to reset your unit ....................................  
2
SOUND ADJUSTMENTS ................... 25  
Adjusting the sound .................................. 25  
Reinforcing the bass sound ...................... 25  
Selecting preset sound modes.................. 26  
Storing your own sound adjustments ........ 27  
LOCATION OF THE BUTTONS ............  
Control panel.............................................  
Remote controller......................................  
Preparing the remote controller ................  
4
4
5
6
LEVEL METER SETTING................... 28  
BASIC OPERATIONS .......................  
7
Selecting level meter patterns................... 28  
RADIO OPERATIONS ......................  
Listening to the radio.................................  
Storing stations in memory .......................  
8
8
9
OTHER MAIN FUNCTIONS ................ 29  
About the demonstration mode  
(DEMO MODE) ...................................... 29  
Setting the clock........................................ 29  
Changing general settings (PSM) ............. 30  
Assigning names to the sources ............... 33  
Tuning in to a preset station ...................... 10  
Other convenient tuner functions .............. 11  
CD OPERATIONS ........................... 12  
Playing a CD ............................................. 12  
Locating a track or a particular portion  
EXTERNAL COMPONENT OPERATIONS ... 34  
on a CD ................................................. 13  
Selecting CD playback modes .................. 14  
Playing a CD Text ...................................... 15  
Other convenient CD functions ................. 15  
CD CHANGER OPERATIONS .............. 35  
Playing CDs .............................................. 35  
Selecting CD playback modes .................. 37  
ADDITIONAL INFORMATION ............. 38  
Handling cassettes.................................... 38  
Handling discs........................................... 39  
MP3 INTRODUCTION ...................... 16  
What is MP3?............................................ 16  
How are MP3 files recorded and  
TROUBLESHOOTING ...................... 40  
SPECIFICATIONS ........................... 43  
played back? ......................................... 16  
MP3 OPERATIONS ......................... 18  
Playing an MP3 disc ................................. 18  
Locating a file or particular portion  
on an MP3 disc....................................... 19  
Selecting MP3 playback modes ................ 21  
TAPE OPERATIONS ........................ 22  
Listening to a tape..................................... 22  
Finding the beginning of a tune................. 23  
Other convenient tape functions ............... 24  
BEFORE USE  
*For safety....  
*Temperature inside the car....  
• Do not raise the volume level too much, as this will  
block outside sounds, making driving dangerous.  
• Stop the car before performing any complicated  
operations.  
If you have parked the car for a long time in hot or  
cold weather, wait until the temperature in the car  
becomes normal before operating the unit.  
3
LOCATION OF THE BUTTONS  
Control panel  
1
2
q
w
3
4
5
e
6
7
r
t
y
u
8
9
p
i
Display window  
o
;
a
s
d
f
g
h
j
k
l
Control panel  
Display window  
1 Display window  
o Dolby NR indicator  
2 CD loading slot  
; S.BASS EQ (Super Bass/Equalizer) level /  
level meter  
3
(standby/on/attenuator) button  
ATT  
/
4 DISP (display) button  
5 Auxiliary input jack  
6 SEL (select) button  
7 EQ LV (Equalizer/Level) button  
8 + / – buttons  
a Main display  
s Level meter  
d Play mode indicators  
RND (random), RPT (repeat),  
B.SKIP (blank skip)  
9 Reset button  
f CD indicator  
p MODE button  
g TAPE indicator  
q Cassette compartment  
w CD 0 (eject) button  
e Source buttons  
h Text name indicators  
DISC, TRACK, STATION  
j Source indicators  
• CD/CH button  
• FM/AM button  
MP3, CD, CD-CH (CD-changer), TAPE, AUX,  
F1, F2, F3, A  
TAPE/AUX button  
r 2 PROG 3 button  
• +10 / –10 button  
k Tuner reception indicators  
MO (monaural), ST (stereo)  
l Clock display  
t TAPE 0 (eject) button  
y 4  
/ ¢  
buttons  
u EX (extra) button  
i Number buttons  
4
4 Functions the same as the +/buttons on the  
Remote controller  
main unit.  
Note:  
These buttons do not function for the preferred  
setting mode (PSM) adjustment.  
ATT  
SOUND  
1
2
5
5 Selects the sound mode.  
Each time you press the button, the EQ  
(equalizer) mode changes.  
U
6
7
6 Selects the source.  
SOURCE  
R
F
Each time you press the button, the source  
changes.  
D
3
4
7 Searches for stations while listening to the  
radio.  
VOL  
VOL  
Fast-forwards or reverses the track/file if  
pressed and held while listening to any disc.  
Skips to the beginning of the next track/file  
or goes back to the beginning of the current  
(or previous) track/file if pressed briefly  
while listening to any disc.  
Fast-forwards or rewinds a tape and finds  
the beginning of a tune (MMS) while  
listening to a tape. To release this operation,  
press button 2 which then starts playback.  
1 Functions the same as the  
button  
ATT  
/
on the main unit.  
2 Changes the band while listening to the  
radio.  
Skips to the first file of the next directory if  
pressed while listening to an MP3 disc.  
Changes the tape direction while listening to  
a tape.  
Selects disc numbers in increasing order,  
and starts playing while listening to the CD  
changer.  
3 Selects preset numbers in increasing order  
while listening to the radio.  
Skips to the first file of the previous directory  
if pressed while listening to an MP3 disc.  
Selects disc numbers in decreasing order,  
and starts playing while listening to the CD  
changer.  
5
2. Place the battery.  
Preparing the remote controller  
Slide the battery into the holder with the +  
side facing upwards so that the battery is  
fixed in the holder.  
Before using the remote controller:  
Aim the remote controller directly at the remote  
sensor on the main unit. Make sure there is no  
obstacle in between.  
Do not expose the remote sensor to strong  
light (direct sunlight or artificial lighting).  
Lithium coin battery  
(product number:  
CR2025)  
3. Return the battery holder.  
Insert again the battery holder pushing it until  
you hear a clicking sound.  
(back side)  
Remote sensor  
Installing the battery  
When the controllable range or effectiveness of  
the remote controller decreases, replace the  
battery.  
WARNING:  
• Store the battery in a place where children  
cannot reach.  
If a child accidentally swallows the battery,  
consult a doctor immediately.  
• Do not recharge, short, disassemble or heat the  
battery or dispose it in a fire.  
1. Remove the battery holder.  
1) Push out the battery holder in the direction  
indicated by the arrow using a ball-point  
pen or a similar tool.  
Doing any of these things may cause the battery  
to give off heat, crack or start a fire.  
• Do not leave the battery with other metallic  
materials.  
Doing this may cause the battery to give off  
heat, crack or start a fire.  
• When throwing away or saving the battery,  
wrap it in tape and insulate; otherwise, the  
battery may start to give off heat, crack or start  
a fire.  
2) Remove the battery holder.  
(back side)  
1)  
2)  
• Do not poke the battery with tweezers or similar  
tools.  
Doing this may cause the battery to give off  
heat, crack or start a fire.  
CAUTION:  
DO NOT leave the remote controller in a place  
(such as dashboards) exposed to direct sunlight  
for a long time. Otherwise, it may be damaged.  
6
BASIC OPERATIONS  
1
2
Note:  
When you use this unit for the first  
time, set the built-in clock correctly, see  
page 29.  
3
1 Turn on the power.  
3 Adjust the volume.  
To increase the volume  
HELLO!appears on the  
display.  
To decrease the volume  
Volume level  
Note on One-Touch Operation:  
When you select a source in step 2 below, the  
power automatically comes on. You do not have  
to press this button to turn on the power.  
2 Select the source.  
Each time you press CD/CH,  
the source alternates between  
CD* and CD-changer (or  
external component)**.  
Clock time  
4 Adjust the sound as you want  
(see pages 25 – 27).  
Each time you press FM/AM, the  
band changes to FM (FM1,  
FM2, FM3) and AM.  
If you need to change the level meter  
pattern, see page 28.  
To drop the volume immediately  
Each time you press TAPE/AUX,  
the source alternates between  
TAPE*** and external  
Press  
briefly while listening to any  
ATT  
/
source. ATTstarts flashing on the display, and  
the volume level will drop immediately.  
To resume the previous volume level, press the  
button briefly again.  
component (AUX INPUT).  
*
If a disc is not in the loading slot, you cannot  
select CD as the source to play. (“NO DISC” will  
appear on the display.)  
To turn off the power  
** Without connecting the CD changer or the  
external component, you cannot select it as the  
source to play.  
*** If a cassette is not in the cassette compartment,  
you cannot select TAPE as the source to play.  
(“NO TAPE” will appear on the display.)  
Press  
for more than 1 second.  
ATT  
/
SEE YOUappears, then the unit turns off.  
If you turn off the power while listening to a  
disc, the disc play will start from where  
playback has been stopped previously, next  
time you turn on the power.  
If you turn off the ignition key without  
turning off this unit, the unit will automatically  
turn on when you turn on the ignition key next  
time. If the last selected source is ready for  
playback (ex. a disc or a tape is in the unit),  
playback starts automatically.  
To operate the tuner, see pages 8 11.  
To play the CD, see pages 12 15.  
To play an MP3 disc, see pages 18 21.  
To operate the tape deck, see pages 22 24.  
To operate the external components, see page 34.  
To operate the CD changer, see pages 35 37.  
7
RADIO OPERATIONS  
Searching for a station manually:  
Listening to the radio  
Manual search  
You can use either automatic searching or manual  
searching to tune in to a particular station.  
1 Select the band (FM1, FM2, FM3, or  
AM).  
FM2  
FM3  
AM  
FM1  
Searching for a station automatically:  
Auto search  
1 Select the band (FM1, FM2, FM3 or  
2 Press and hold ¢  
or 4  
AM).  
until “M” (manual) starts flashing on  
the display.  
FM2  
FM3  
AM  
FM1  
Note:  
This receiver has three FM bands (FM1, FM2,  
and FM3). You can use any one of them to listen  
to an FM broadcast.  
3 Tune in to a station you want while  
“M” is flashing.  
Selected band appears.  
To tune in to stations of  
higher frequencies  
2 Start searching for a station.  
To search stations of  
higher frequencies  
To tune in to stations of  
lower frequencies  
To search stations of  
lower frequencies  
• If you release your finger from the button, the  
manual mode will automatically turn off after  
5 seconds.  
• If you hold down the button, the frequency  
keeps changing (in 50 kHz intervals for FM and  
9 kHz for AM) until you release the button.  
When a station is received, searching stops.  
To stop searching before a station is  
received, press the same button you have  
pressed for searching.  
8
Manual preset  
You can preset up to 6 stations in each band  
(FM1, FM2, FM3, and AM) manually.  
Storing stations in memory  
You can use one of the following methods to  
store broadcasting stations in memory.  
• Automatic preset: SSM (Strong-station  
Sequential Memory)  
Ex.: Storing an FM station of 88.3 MHz into the  
preset channel number 1 of the FM1 band  
• Manual preset  
• Storing your favorite station into the EX button  
1 Select the FM1 band.  
Automatic preset: SSM  
You can preset up to 6 local stations in each FM  
band (FM1, FM2, and FM3).  
2 Tune in to a station (in this example,  
of 88.3 MHz).  
1 Select the band (FM1, FM2, or FM3).  
To tune in to stations of  
higher frequencies  
FM2  
FM3  
AM  
FM1  
2 Press MODE repeatedly until SSM”  
To tune in to stations of  
lower frequencies  
appears.  
3 Press and hold the number button  
(in this example, 1) for more than  
2 seconds.  
3 Press SEL (select).  
“P1” flashes for a few seconds.  
4 Repeat the above procedure to store  
other stations into other preset  
numbers.  
“--SSM--” appears, then disappears  
when automatic preset is over.  
Local stations with the strongest signals are  
searched for and stored automatically in the  
band you have selected (FM1, FM2, and FM3).  
These stations are preset in the number  
buttons—No. 1 (lowest frequency) to No. 6  
(highest frequency).  
When automatic preset is over, the station stored  
in the number 1 button will be automatically tuned  
in.  
9
Storing your favorite station into the  
EX (extra) button  
You can preset an FM or AM station (such as  
your favorite station or traffic announcement  
station); and recall it by one touch operation even  
if the unit is turned off.  
Tuning in to a preset station  
You can easily tune in to a preset station.  
Remember that you must store stations first. If  
you have not stored them yet, see page 9.  
1 Select the band (FM1, FM2, FM3, or  
AM) you want.  
Ex.: Storing an FM station of 88.3 MHz into the  
EX button  
FM2  
FM1  
FM3  
AM  
1 Select the FM1 band.  
2 Select the number (1 6) for the  
preset station you want.  
2 Tune in to a station (in this example,  
of 88.3 MHz).  
To tune in to stations of  
higher frequencies  
To tune in to stations of  
lower frequencies  
To tune in the favorite station (EX)  
EX  
Press EX (extra) so that the unit  
automatically turns on (if it has  
been off).  
Your favorite station is tuned in.  
3 Press and hold the EX (extra) button  
• If you press the button again, the previous  
source will be played back again.  
until EXflashes.  
EX  
“EX” flashes on the display.  
Notes:  
• The previously preset station is erased when a new  
station is stored.  
• Preset stations are erased when the power supply to  
the memory circuit is interrupted (for example,  
during battery replacement). If this occurs, preset  
the stations again.  
10  
Selecting FM reception mode  
When an FM stereo broadcast is hard to  
receive, follow the procedure below:  
Other convenient tuner functions  
Scanning broadcast stations  
1 Select SCAN.”  
1 Select MONO.”  
*SSM  
SCAN  
SSM  
SCAN  
*MONO  
Canceled  
(frequency indication)  
MONO  
Canceled  
(frequency indication)  
* When receiving an FM stereo broadcast.  
2 Select FM reception mode.  
2 Start scanning.  
Each time a broadcast is tuned  
in, scanning stops for about  
5 seconds (tuned frequency  
number flashes on the display),  
and you can check what  
program is now being  
FM reception mode turns on  
(“MONO ON”) and off (“MONO  
OFF”) alternately.  
When the monaural mode is turned on, the  
sound you hear becomes monaural but reception  
will be improved.  
broadcasted.  
If you want to listen to that program, press  
MODE button again to stop scanning.  
Lights up when receiving an FM  
broadcast in stereo.  
Showing an assigned name  
If you have assigned a name to a station  
frequency, the display shows its assigned name  
after the station frequency is displayed.  
When the station name is displayed, the  
STATION indicator lights up on the display (see  
page 33).  
J
Lights up  
To confirm the station frequency while the  
assigned name is shown, press DISP (display).  
Each time you press the button, the assigned  
name and the station frequency alternate on the  
display.  
Note:  
If no name is assigned, “NO NAME” will appear  
when you press DISP (display).  
11  
CD OPERATIONS  
Notes:  
Playing a CD  
• When a CD is inserted upside down, the CD  
automatically ejects.  
1 Insert a disc into the loading slot.  
• When you play a CD Text, the disc title and  
performer appear on the display. Then the current  
track title appears on the display, followed by the  
track number and elapsed playing time. See also  
“Playing a CD Text” (page 15) and “Selecting the  
scroll mode—SCROLL” (page 32).  
The unit turns on, draws  
in the CD and starts  
playback automatically.  
If a CD Text includes much text information, some  
may not appear on the display.  
• If you play a CD with assigned name (see page 33),  
the assigned name appears on the display, followed  
by the track number and elapsed playing time. See  
also “Showing an assigned name” on page 15.  
CD indicator lights up.  
To stop play and eject the CD  
Press CD 0.  
CD play stops and the CD automatically ejects  
from the loading slot (“EJECT” appears on the  
display). The source changes to the last selected  
source.  
Total playing time of  
the inserted disc  
Total track number of  
the inserted disc  
Notes:  
• If the ejected disc is not removed for about  
15 seconds, the disc is automatically inserted again  
into the loading slot to protect it from dust. (CD  
play will not start this time.)  
Current track  
Elapsed playing time  
You can eject the CD even when the unit is turned  
off.  
• If you change the source, CD play also stops  
(without ejecting the disc).  
Next time you select “CD” as the source, CD play  
starts from where playback had been stopped  
previously.  
Note on One-Touch Operation:  
When a CD is already in the loading slot, pressing  
CD/CH turns on the unit and starts playback  
automatically.  
12  
To skip 10 tracks  
Locating a track or a  
particular portion on a CD  
1 Press MODE repeatedly until  
2 –10 +10 3” appears.  
To fast-forward or reverse the track  
2 –10 +10 3  
Canceled INTRO  
REPEAT  
Press and hold ¢  
playing a CD, to fast-forward  
the track.  
while  
RANDOM  
Press and hold 4  
while  
playing a CD, to reverse the  
track.  
2 Press +10 or –10 button.  
To go to the next tracks or the previous  
track  
To skip 10 tracks* forwards to  
the last track  
Press ¢  
briefly while  
playing a CD, to go ahead to  
the beginning of the next track.  
Each time you press the  
To skip 10 tracks* backwards  
to the first track  
button consecutively, the  
beginning of the next track is  
located and played back.  
* The first time you press +10 or –10 button, the  
track skips to the nearest higher or lower track  
with a track number of multiple ten (ex. 10th,  
20th, 30th).  
Then each time you press the button, you can  
skip 10 tracks (see “How to use the +10 and –10  
buttons” below).  
Press 4  
briefly while  
playing a CD, to go back to the  
beginning of the current track.  
Each time you press the  
button consecutively, the  
beginning of the previous track  
is located and played back.  
• After the last track, the first track will be  
selected, and vice versa.  
How to use the +10 and –10 buttons  
• Ex. 1: To select track number 32 while  
playing track number 6  
To go to a particular track directly  
Press the number button corresponding to the  
track number to start its playback.  
(Three times)  
(Twice)  
Track 6  
\10 \ 20 \ 30 \ 31 \ 32  
• Ex. 2: To select track number 8 while playing  
track number 32  
To select a track number from 1 – 6:  
Press 1 (7) – 6 (12) briefly.  
To select a track number from 7 – 12:  
Press and hold 1 (7) – 6 (12) for more than  
1 second.  
(Three times)  
(Twice)  
Track 32  
\30 \ 20 \ 10 \ 9 \ 8  
13  
2 Press SEL (select).  
Each time you press the  
button, CD random play mode  
turns on (“RANDOM ON”)  
and off (“RANDOM OFF”)  
alternately.  
Selecting CD playback modes  
To play back tracks repeatedly  
(Repeat Play)  
You can play back the current track repeatedly.  
1 Press MODE repeatedly until  
“REPEAT” appears.  
2 10 +10 3  
Canceled INTRO  
REPEAT  
When the random mode is turned on, the RND  
indicator lights up on the display and a randomly  
selected track starts playing.  
RANDOM  
To play back only intro (Intro scan)  
You can play back the first 15 seconds of each  
track sequentially.  
2 Press SEL (select).  
Each time you press the  
button, CD repeat play mode  
turns on (“REPEAT ON”) and  
off (“REPEAT OFF”)  
1 Press MODE repeatedly until  
“INTRO” appears.  
2 10 +10 3  
Canceled INTRO  
REPEAT  
alternately.  
RANDOM  
When the repeat mode is turned on, the RPT  
indicator lights up on the display.  
2 Press SEL (select).  
Each time you press the  
button, CD Intro scan mode  
turns on (“INTRO ON”) and  
off (“INTRO OFF”) alternately.  
To play back tracks at random  
(Random Play)  
You can play back all tracks on the CD at  
random.  
1 Press MODE repeatedly until  
“RANDOM” appears.  
2 10 +10 3  
Canceled INTRO  
REPEAT  
RANDOM  
When the Intro scan mode is turned on, the  
current track number flashes.  
14  
Playing a CD Text  
Other convenient CD functions  
In a CD Text, some information about the disc (its  
disc title, performer and track title) is recorded.  
You can show these disc information on the  
display.  
Showing an assigned name  
You can assign names to conventional CDs.  
If you have assigned a name to a CD, the  
assigned name appears on the display, followed  
by the current track number and elapsed playing  
time.  
1 Select text display mode while  
playing a CD Text.  
When the CD name is displayed, the DISC  
indicator lights up on the display (see page 33).  
Each time you press the  
button, the display changes  
as follows:  
Current track no.  
Lights up  
Disc Title / Performer  
and Track Title  
To confirm the current track number and  
elapsed playing time while the assigned  
name is shown, press DISP (display).  
Each time you press the button, the assigned  
name and current track number/elapsed playing  
time alternate on the display.  
Current track no.  
and Elapsed playing time  
When disc information appears on the display,  
the corresponding name indicator lights up.  
When a disc title/performer is displayed.  
When a track title is displayed.  
Note:  
You cannot assign a name to a CD Text or an MP3  
disc.  
Prohibiting CD ejection  
You can prohibit CD ejection and can lock a CD  
in the loading slot.  
Notes:  
You can use the scroll mode to show the disc  
information on the display.  
See also “Selecting the scroll mode—SCROLL” on  
page 32.  
While pressing CD/CH, press and  
hold CD 0 for more than  
• When you press DISP (display) while playing a  
conventional CD, “NO NAME” appears for the  
disc title/performer (unless you have assigned a  
name to the CD) and the track title.  
2 seconds. “CD  
display for a while, and the CD is  
locked and cannot be ejected.  
” flashes on the  
To cancel the prohibition and unlock the CD,  
press and hold CD 0 for more than 2 seconds  
again, while pressing CD/CH.  
“EJECT OK” flashes on the display for a while,  
and the CD is unlocked.  
15  
MP3 INTRODUCTION  
Precautions when recording MP3 files  
on a CD-R or CD-RW  
What is MP3?  
MP3 is an abbreviation of Motion Picture Experts  
Group (or MPEG) Audio Layer 3*. MP3 is simply  
a file format with a data compression ratio of  
1:10 (128 Kbps**). That means, by using MP3  
format, one CD-R or CD-RW can contain 10  
times as much data volume as a regular CD can.  
This unit can only read MP3 files that are  
recorded in the format that is compliant with ISO  
9660 Level 1, Level 2 or Joliet.  
How are MP3 files recorded  
and played back?  
* This player is not compatible with the data encoded  
with Layer 1 and 2 formats.  
**Bit rate is the average number of bits that one  
second of audio data will consume. The unit used is  
Kbps (1024 bits/second). To get a better audio  
quality, choose a higher bit rate. The most popular  
bit rate for encoding is 128 Kbps.  
MP3 “files (tracks)” can be recorded in  
directories (folders)”—in PC terminology.  
During recording, the files and directories can be  
arranged in a way similar to arranging files and  
directories/folders of computer data.  
Root” is similar to the root of a tree. Every file  
and directory can be linked to and be accessed  
from the root.  
An MP3 decoder is incorporated into this unit.  
You can play back MP3 files (tracks) recorded on  
CD-Rs, CD-RWs, and CD-ROMs.  
Playback order, file search order, and directory  
search order of the MP3 files recorded on a disc  
are determined by the writing (or encoding)  
application; therefore, playback order may be  
different from the one you have intended while  
recording the directories and the files.  
Compatible with ID3v1  
Extra information data such as album title,  
performer name, song title, recording year, music  
genre and a brief comment can be stored within  
an MP3 file.  
This unit can show ID3v1 tags (album name,  
performer name and song title) on the display.  
• Some characters cannot be shown correctly.  
• This unit is not compatible with ID3v2.  
The illustration on the next page shows an  
example of how MP3 files are recorded on a  
CD-R or CD-RW, how they are played back, and  
how they are searched for on this unit.  
Other main features in this unit:  
• Maximum number of directories/files: 289  
(Total)  
• Available characters: A–Z, 0–9, _(underscore)  
• Maximum number of characters for file name  
(ISO 9660 Level 1):12 (inclusive of  
separation mark—“.and  
Notes:  
• The unit can read a CD-ROM containing MP3 files.  
However, if non-MP3 files are recorded together  
with MP3 files, this unit will take a longer time to  
scan the disc. It may also cause the unit to  
malfunction.  
extension code—“mp3”)  
(ISO 9660 Level 2): 31 (inclusive of  
separation mark—“.and  
• The unit cannot read or play an MP3 file without  
the extension code—mp3.  
• The unit is not compatible with Playlist*.  
extension code—“mp3”)  
(Joliet):  
64 (inclusive of  
separation mark—“.and  
extension code—“mp3”)  
* A playlist is a simple text file, used on a PC, which  
enables users to make their own playback order  
without physically rearranging the files.  
• Maximum number of characters for directory  
name: 64  
16  
MP3 directory/file configuration  
ROOT  
01  
02  
04  
08  
1
2
3
4
03  
05  
09  
18  
10  
11  
19  
5
6
06  
07  
20  
21  
22  
8
7
9
12  
13  
14  
15  
16  
17  
Note:  
: Root  
ROOT  
There is no limit on the number of the hierarchy levels (nested  
directories). However, up to 8 hierarchy levels is recommended for  
stable operations.  
: Directories  
: MP3 files  
01  
MP3 playback/search order  
• The numbers in circles below the MP3 files ( ) indicate the playback order and search order of  
the MP3 files. Normally this unit plays back MP3 files in the recorded order.  
• The numbers inside the directories indicate the playback order and search order of the directories  
on an MP3 disc. Normally this unit plays back MP3 files in the directories in the recorded order.  
17  
MP3 OPERATIONS  
Refer also to CD OPERATIONSon pages  
12 to 15.  
Playback starts automatically from the first file of  
the first directory once file check is completed.  
Then, the display changes to show the following:  
Playing an MP3 disc  
When “TAG ON” is selected (initial setting:  
see page 32)  
1 Insert an MP3 disc into the loading  
slot.  
Album name/performer name (directory  
name)* = Track title (file name)* =  
Elapsed playing time  
The unit turns on, draws  
in an MP3 disc and  
starts playback  
automatically.  
* If an MP3 file does not have ID3 tags, directory  
name and file name appear.  
When “TAG OFF” is selected  
Directory name and file name appear.  
Ex.: When the disc contains 13 directories  
and 125 MP3 files  
Notes:  
• All the files on the disc will be played repeatedly  
until you stop playback—All File Repeat Play.  
• MP3 discs require a longer readout time**.  
(The readout time differs due to the complexity of  
the directory/file configuration.)  
Lights up  
**Readout time is the time taken by the unit to  
scan or check the disc for files and file  
information.  
MP3 indicator lights up.  
18  
To change the display information  
Locating a file or a particular  
portion on an MP3 disc  
While playing back an MP3 file,  
you can change the file  
information shown on the display.  
Each time you press DISP  
(display), the display changes to  
show the following:  
To fast-forward or reverse the file  
Press and hold ¢  
playing an MP3 disc, to fast-  
forward the file.  
while  
When “TAG ON” is selected (initial setting:  
see page 32)  
Press and hold 4  
playing an MP3 disc, to  
reverse the file.  
while  
Album name/  
Performer name  
Track title  
(Directory name)*  
(File name)*  
Elasped playing time  
To go to the next or previous files  
* If an MP3 file does not have ID3 tags, directory  
name and file name appear.  
Press ¢  
briefly while  
When “TAG OFF” is selected  
playing an MP3 disc, to go  
forward to the beginning of  
the next file.  
Each time you press the  
button consecutively, the  
beginning of the next file is  
located and played back.  
(See MP3 playback/search  
orderon page 17.)  
Directory name  
Elasped playing time  
File name  
Notes:  
You can use the scroll mode to show the disc  
information on the display.  
See also “Selecting the scroll mode—SCROLL” on  
page 32.  
Press 4  
briefly while  
playing an MP3 disc, to go  
back to the beginning of the  
current file.  
Each time you press the  
button consecutively, the  
beginning of the previous file  
is located and played back.  
(See MP3 playback/search  
orderon page 17.)  
• If you change the setting from “TAG OFF” to “TAG  
ON” while playing an MP3 file, the tag display will  
be activated when the next file starts playing.  
To stop play and eject the disc  
Press CD 0.  
Disc play stops and the disc automatically ejects  
from the loading slot (EJECTappears on the  
display). The source changes to the last selected  
source.  
If you change the source, the disc play also stops  
(without ejecting the disc this time).  
Notes:  
• If the ejected disc is not removed for about  
15 seconds, the disc is automatically inserted again  
into the loading slot to protect it from dust. (Disc  
play will not start this time.)  
You can eject the disc even when the unit is turned  
off.  
19  
Press the number button corresponding to the  
directory number to start playing the first file in  
the selected directory.  
To skip 10 files  
1 Press MODE repeatedly until  
2 10 +10 3appears.  
2 –10 +10 3  
REPEAT  
Canceled  
RANDOM  
To select a directory number from 1 6:  
Press 1 (7) 6 (12) briefly.  
To select a directory number from 7 12:  
Press and hold 1 (7) 6 (12) for more than  
1 second.  
2 Press +10 or 10 button.  
Notes:  
To skip 10 files* forwards to  
the last file  
• If “MP3” flashes on the display after you have  
selected a directory, it means that the directory does  
not contain any MP3 files.  
You cannot directly select a directory with a number  
greater than 12.  
To skip 10 files* backwards  
to the first file  
* The first time you press +10 or 10 button, the  
file skips to the nearest higher or lower file with  
a file number of multiple ten (ex. 10th, 20th,  
30th).  
To select a particular file in a directory, press  
¢
or 4  
after selecting the directory.  
Then each time you press the button, you can  
skip 10 files.  
After the last file, the first file will be selected,  
and vice versa.  
To skip to the next directory or the  
previous directory—either on the same  
hierarchy level or on a different hierarchy  
level  
Press 3 (+10) briefly while  
playing an MP3 disc.  
To go to a particular directory directly  
Each time you press the button  
consecutively, the next directory  
is located (and the first file in  
the directory starts playing, if  
recorded).  
IMPORTANT:  
To directly select the directories using the  
number button(s), it is required that directories  
are assigned 2 digit numbers at the beginning  
of their directory names. (This can only be  
done during the recording of CD-Rs or  
CD-RWs.)  
Ex.: If directory name is 01 ABC”  
= press 1 to go to directory 01 ABC  
If directory name is 1 ABC”  
(See MP3 playback/search  
orderon page 17.)  
Press 2 (10) briefly while  
playing an MP3 disc.  
Each time you press the button  
consecutively, the previous  
directory is located (and the  
first file in the directory starts  
playing, if recorded).  
= cannot directly select this directory.  
If directory name is 12 ABC”  
= press and hold 6 (12) to go to  
directory 12 ABC  
(See MP3 playback/search  
orderon page 17.)  
Note:  
If the directory does not contain any MP3 files, it is  
skipped.  
20  
To play back tracks at random  
(Random Play)  
Selecting MP3 playback modes  
To play back tracks repeatedly (Repeat  
Play)  
1 Press MODE repeatedly until  
RANDOMappears.  
2 10 +10 3  
1 Press MODE repeatedly until  
REPEAT  
REPEATappears.  
Canceled  
RANDOM  
2 10 +10 3  
REPEAT  
Canceled  
RANDOM  
2 Press SEL (select).  
Each time you press the  
button, random play mode  
changes as follows:  
2 Press SEL (select).  
Each time you press the  
button, repeat play mode  
changes as follows:  
RANDOM1 ON  
RANDOM2 ON  
RANDOM OFF  
REPEAT1 ON  
REPEAT2 ON  
RND  
Indicator  
REPEAT OFF  
Mode  
Plays at random  
RANDOM1 ON Lights  
All files of the current  
directory, then the  
files of the next  
RPT  
Indicator  
Mode  
Plays repeatedly  
REPEAT1 ON Lights  
The current file (or  
specified file).  
directory, and so on.  
RANDOM2 ON Flashes All files of all  
directories.  
REPEAT2 ON Flashes All files of the current  
directory (or specified  
RANDOM OFF Goes off Canceled.  
directory).  
REPEAT OFF Goes off Canceled.  
21  
TAPE OPERATIONS  
2 Press SEL (select).  
Each time you press the  
button, the Dolby B NR turns  
on (“DOLBY ON”) and off  
(“DOLBY OFF”).  
Listening to a tape  
You can play back type I (normal) tapes.  
1 Insert a cassette into the cassette  
compartment.  
This indicator lights up when the  
Dolby B NR is turned on.  
3 Select the tape direction.  
The unit turns on and tape play starts  
automatically.  
When one side of the tape reaches its end  
during play, the other side of the tape  
automatically starts playing. (Auto Reverse)  
Each time you press the  
button, the tape direction  
changes alternately.  
Tape indicator flashes  
Note on One-Touch Operation:  
When a cassette is already in the cassette  
compartment, pressing TAPE/AUX turns on the  
unit and starts tape play automatically.  
2 Turn on or off the Dolby B NR* as  
needed.  
* Manufactured under license from Dolby  
Laboratories.  
“Dolby” and the double-D symbol are  
trademarks of Dolby Laboratories.  
1 Press MODE repeatedly until  
“DOLBY B” appears.  
DOLBY B  
Canceled  
B.SKIP  
REPEAT  
22  
To stop play and eject the cassette  
Press TAPE 0.  
Finding the beginning of a  
tune  
Tape play stops and the cassette automatically  
ejects from the cassette compartment.  
If you change the source, the tape play also  
stops (without ejecting the cassette this time).  
You can also eject the cassette by pressing TAPE 0  
while the unit is turned off.  
Multi Music Scan allows you to automatically  
start playback from the beginning of a specified  
tune.You can specify up to 9 tunes ahead or  
before the current tune.  
During playback  
To fast-forward and rewind a tape  
1 Specify where (how many tunes  
ahead of or before the current tune)  
the tune you want is located.  
Press ¢  
for more than  
To locate a tune ahead  
of the current tune on  
the tape  
1 second to fast-forward the  
tape.  
When the tape reaches its  
end, the tape is reversed  
and playback starts from the  
beginning of the other side.  
To locate a tune before  
the current tune on the  
tape  
Press 4  
for more than  
1 second to rewind the tape.  
When the tape reaches its  
end, playback of the same  
side starts.  
Each time you press the button, the  
number changes up to 9.  
When the beginning of the specified tune is  
located, playback starts automatically.  
To stop fast-forward and rewind at any  
position on the tape, press 2 PROG 3.  
Tape play starts from that position on the tape.  
Notes:  
• While locating a specified tune:  
– If the tape is rewound to its beginning, playback  
starts from the beginning of that side.  
– If the tape is fast-forwarded to the end, it is  
reversed and played from the beginning of the  
other side.  
Note:  
When the tape reaches its end while fast-forwarding,  
the tape direction will be changed automatically.  
• In the following cases, Multi Music Scan may not  
operate correctly:  
Tapes with tunes having long pianissimo  
passages (very quiet parts) or non-recorded  
portions.  
Tapes with short non-recorded sections.  
Tapes with high level noise or humming between  
tunes.  
– The Dolby NR setting does not match. For  
example, if the tape is recorded with the Dolby C  
NR.  
23  
Notes:  
Other convenient tape  
functions  
In the following cases, Blank Skip and Repeat Play  
may not operate correctly:  
– Tapes with tunes having long pianissimo passages  
(very quiet parts) or non-recorded portions.  
– Tapes with short non-recorded sections.  
Tapes with high level noise or humming between  
tunes.  
Skipping blank portions on the tape  
You can skip blank portions between the tunes  
(Blank Skip).  
1 Press MODE repeatedly until  
“B.SKIP” appears.  
– The Dolby NR setting does not match. For example,  
if the tape is recorded with the Dolby C NR.  
DOLBY B  
Canceled  
B.SKIP  
REPEAT  
Prohibiting tape ejection  
You can prohibit the tape ejection and can lock a  
tape in the cassette compartment.  
2 Press SEL (select).  
Each time you press the  
button, skip function mode  
turns on (“B.SKIP ON”) and  
off (“B.SKIP OFF”)  
While pressing TAPE/AUX, press  
and hold TAPE 0 for more than  
2 seconds. “TAPE  
” flashes  
alternately.  
on the display for a while, and  
the tape is locked and cannot be  
ejected.  
When this function is on, the B.SKIP indicator  
lights up on the display and the unit skips blank  
portions of 15 seconds or more, fast-forwards to  
the next tune, then starts playing it.  
To cancel the prohibition and unlock the tape,  
press and hold TAPE 0 for more than 2 seconds  
again, while pressing TAPE/AUX.  
“EJECT OK” flashes on the display for a while,  
and the tape is unlocked.  
Playing the current tune repeatedly  
You can play the current tune repeatedly  
(Repeat Play).  
1 Press MODE repeatedly until  
“REPEAT” appears.  
DOLBY B  
Canceled  
B.SKIP  
REPEAT  
2 Press SEL (select).  
Each time you press the  
button, repeat play mode  
turns on (“REPEAT ON”) and  
off (“REPEAT OFF”)  
alternately.  
24  
SOUND ADJUSTMENTS  
Adjusting the sound  
Reinforcing the bass sound  
You can adjust the sound characteristics to your  
preference.  
You can also adjust the level of Super Bass.  
1 Select “S.BASS.”  
1 Select the item you want to adjust.  
Each time you press the  
EQ  
S.BASS  
button, the adjustable items  
change as follows:  
Canceled  
L.V.METER  
While adjusting Super Bass, S. BASS level  
flashes.  
BAL  
(Balance)  
VOLUME  
FADER  
As the number increases, Super Bass  
level also increases.  
Indication  
To do:  
Range  
FADER*  
Adjust the front  
and rear speaker  
balance.  
R06 (Rear only)  
|
F06 (Front only)  
2 Adjust the level within the range of  
“00” to “08.”  
BAL  
Adjust the left  
L06 (Left only)  
(Balance) and right speaker  
balance.  
|
R06 (Right only)  
VOLUME Adjust the volume. 00 (min.)  
|
50 (max.)  
*
If you are using a two-speaker system, set the  
fader level to “00.”  
2 Adjust the level.  
Note:  
Normally + / – buttons work for volume adjustment.  
So you do not have to select “VOLUME” to adjust the  
volume level.  
25  
To store a sound mode separately for each  
playback source (EQ Link)  
Once you select a sound mode, it is stored in  
memory. It will be recalled every time you select  
the same source. A sound mode can be stored  
for each of the following sources—FM1, FM2,  
FM3, AM, CD, tape, external components and  
the EX (extra) button (see page 10).  
Selecting preset sound modes  
You can select a preset sound adjustment  
suitable to the music genre.  
1 Select EQ.”  
EQ  
S.BASS  
Canceled  
L.V.METER  
• See also “Changing general settings (PSM)” on  
page 30.  
1 Press and hold SEL (select) for more than  
2 seconds so that one of the PSM items  
appears on the display.  
2 Press ¢  
or 4  
(Equalization Link).”  
to select “EQ LINK  
2 Select the sound mode.  
The sound mode  
3 Press + to select “LINK ON.”  
4 Press SEL (select) to finish the setting.  
changes as follows:  
To cancel EQ Link, repeat the same procedure  
and select “LINK OFF” by pressing – in step 3.  
FLAT  
Hard Rock  
R & B*  
When EQ LINKis set to LINK ON”  
The selected sound mode and Super Bass  
level can be stored in memory for the current  
source.  
Each time you select the same source, the  
same sound mode is also recalled, and shown  
after the source name.  
POP  
JAZZ  
DanceMusic  
Country  
USER**  
Raggae  
Classic  
(back to the beginning)  
*
Rhythm and Blues  
** If you want to adjust and store your original  
sound mode (USER), see “Storing your own  
sound adjustments” on page 27.  
When EQ LINKis set to LINK OFF”  
The selected sound mode effect applies to all  
the sources selected.  
EQ level changes as you  
select the sound mode.  
Ex.: When you select “R & B”  
To cancel the sound mode, select “FLAT” in  
step 2.  
Note:  
You can adjust the sound mode to your preference,  
and store it in memory.  
26  
Storing your own sound  
adjustments  
3 Adjust the selected sound element.  
• Refer to the table  
below for adjusting the  
selected sound  
element.  
You can adjust the sound modes to your  
preference and store your own adjustments in  
memory (USER sound mode).  
• There is a time limit in doing the following  
procedure. If the setting is cancelled before you  
finish, start from step 1 again.  
Indication  
Range  
LOW FREQ.  
LOW LEVEL  
MID FREQ.  
MID LEVEL  
HIGH FREQ.  
50 Hz, 80 Hz, 120 Hz  
–06 (min.) — +06 (max.)  
700 Hz, 1 kHz, 2 kHz  
–06 (min.) — +06 (max.)  
8 kHz, 12 kHz  
1 Select EQ.”  
EQ  
S.BASS  
Canceled  
L.V.METER  
HIGH LEVEL –06 (min.) — +06 (max.)  
EQ level adjusted flashes  
2 Select sound elements to adjust.  
Each time you press the  
button, the sound elements to  
adjust change as follows:  
Ex.: When you adjust “LOW FREQ”  
4 Repeat steps 2 and 3 to adjust the  
other sound elements.  
LOW FREQ.*  
MID FREQ.*  
HIGH FREQ.*  
LOW LEVEL  
MID LEVEL  
HIGH LEVEL  
5 Store the adjustments.  
Your setting is stored in USER  
sound mode.  
(back to the beginning)  
FREQ. (LOW, MID, HIGH):  
Select the center frequency to  
adjust.  
LEVEL (LOW, MID, HIGH):  
Adjust the enhancement level.  
* By pressing ¢  
or 4  
, you can  
directly move as follows:  
LOW FREQ.  
MID FREQ.  
HIGH FREQ.  
27  
LEVEL METER SETTING  
3. SideWinder  
Selecting level meter patterns  
Level meter is displayed horizontally.  
You can select one from 7 different level meter  
patterns or a demonstration of all the patterns.  
1 Select “L.V. METER.”  
4. Full Size  
Level meter is displayed on the main display.  
EQ  
S.BASS  
Canceled  
L.V.METER  
5. Spin  
Spin in the right meter.  
2 Press +/– to select the level meter  
pattern.  
Each time you press the  
button, the level meter  
changes as follows:  
6. Double  
Waves are displayed on both level meters.  
ALL DEMO  
Full Size  
Dolphin  
Standard  
Spin Double  
OFF (back to the beginning)  
SideWinder  
HIGH WAY  
7. HIGH WAY  
As if you were driving along a highway.  
Level meter patterns  
1. ALL DEMO (initial setting)  
Demonstrates all the level meter patterns,  
each for 20 seconds.  
8. Dolphin  
2. Standard  
A dolphin is swimming in the main display.  
Standard level meter.  
9. OFF  
No level meter is displayed.  
28  
OTHER MAIN FUNCTIONS  
About the demonstration  
mode (DEMO MODE)  
Setting the clock  
After installation, set the built-in clock correctly.  
When shipped from the factory, DEMO” is set to  
“DEMO ON” in this unit. The demonstration will  
start automatically if no sound comes in for  
3 minutes. (See page 31.)  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(See page 31.)  
To deactivate the demonstration mode  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(See page 31.)  
2 If “CLOCK HOUR” does not appear,  
press ¢  
or 4  
repeatedly  
until it appears.  
2 Press ¢  
or 4  
to select  
“DEMO.”  
3 Adjust the hour.  
3 Press – to select “DEMO OFF.”  
4 Press ¢  
or 4  
until  
“CLOCK MIN” (minute) appears on  
the display.  
4 Finish the setting.  
CONTINUED TO THE NEXT PAGE  
29  
5 Adjust the minute.  
Changing general settings  
(PSM)  
You can change the settings for this unit by using  
the PSM (Preferred Setting Mode) control.  
Basic Procedure  
• There is a time limit in doing the following  
procedure. If the setting is canceled before you  
finish, start from step 1 again.  
6 Finish the setting.  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(See page 31.)  
To check the current clock time while the unit  
is turned off, press DISP (display).  
The power turns on, the clock time is shown for  
5 seconds, then the power turns off.  
2 Select a PSM item you want to  
adjust. (See page 31.)  
3 Adjust the PSM item selected.  
4 Repeat steps 2 and 3 to adjust the  
other PSM items if necessary.  
5 Finish the setting.  
30  
Preferred Setting Mode (PSM) items  
1
2
3
See  
page  
Factory-preset  
settings  
Hold.  
Select.  
Set.  
+
DEMO  
Demonstration mode  
DEMO OFF  
Back  
DEMO ON  
DEMO ON  
1:00  
31  
29  
CLOCK HOUR Hour adjustment  
CLOCK MIN Minute adjustment  
CLOCK DISP Clock display  
Advance  
Advance  
Back  
CLOCK OFF  
CLOCK ON  
CLOCK OFF  
LINK OFF  
31  
26  
EQ LINK  
Sound control memory  
linkage  
LINK ON  
LINK OFF  
DIM OFF  
DIM ON  
DIMMER  
Dimmer mode  
DIM AUTO  
32  
32  
32  
DIM AUTO  
CONTRAST  
SCROLL  
Display contrast  
Scroll mode  
CONTRAST 1 – CONTRAST 10 CONTRAST 5  
SCRL ONCE SCRL AUTO  
SCRL OFF  
SCRL ONCE  
EXT INPUT  
AUX ADJ  
External input selection  
CD CHANGER LINE INPUT CD CHANGER 32  
Auxiliary input level  
adjustment  
A.ADJ 00 – A.ADJ 05  
TAG OFF TAG ON  
A.ADJ 00  
TAG ON  
32  
32  
TAG DISP  
Tag display  
Turning the demo mode on or off  
—DEMO MODE  
You can turn the demo mode on or off.  
When shipped from the factory, DEMO ON” is  
selected.  
Setting the clock displayCLOCK DISP  
You can set the clock to show on the display  
when the unit is turned off.  
When shipped from the factory, the clock is set  
not to show on the display.  
• CLOCK OFF:  
• CLOCK ON:  
Clock display is turned off.  
Clock display is turned on.  
• DEMO OFF:  
• DEMO ON:  
Turns the demo mode off.  
Turns the demo mode on. The  
demonstration will start  
automatically if no sound  
comes in for 3 minutes.  
Note:  
If the power supply is not interrupted by turning off  
the ignition key of your car, it is recommended to  
select “CLOCK OFF” to save the car’s battery.  
Note:  
If the unit has been reset (and the power is on), the  
demonstration will start if no sound comes in for  
about 15 seconds.  
31  
Notes:  
Selecting the dimmer modeDIMMER  
• If the current source is CD changer or external  
component, this setting does not appear.  
For connecting the Line Input Adapter KS-U57 and  
the external component, refer to the Installation/  
Connection Manual (separate volume).  
When you turn on the car headlights, the display  
automatically dims (Auto Dimmer).  
When shipped from the factory, Auto Dimmer  
mode is activated.  
• DIM OFF:  
• DIM ON:  
• DIM AUTO:  
Cancels Auto Dimmer.  
Always dims the display.  
Activates Auto Dimmer.  
Adjusting the auxiliary input level  
AUX ADJ  
Adjust the auxiliary input level properly when an  
external component is connected to the auxiliary  
input jack.  
When shipped from the factory, the auxiliary  
(AUX) input level is set at level 00.  
If the input level of the connected component is  
not high enough, increase the input level  
properly. Without adjusting the line input level,  
you may be surprised at the loud sound when  
you change source from the external component  
to another source.  
Note:  
Auto Dimmer equipped for this unit may not work  
correctly on some vehicles, particularly on those  
having a control dial for dimming.  
In this case, set the dimmer mode to “DIM ON” or  
“DIM OFF.”  
Adjusting the display contrast level  
CONTRAST  
You can adjust the display contrast level from 1  
(dark) to 10 (bright).  
When shipped from the factory, the display  
contrast level is set at level 5.  
Turning the tag display on or off  
TAG DISP  
Selecting the scroll modeSCROLL  
You can select the scroll mode for the disc  
information.  
When shipped from the factory, Auto Scroll mode  
is set to “SCRL ONCE.”  
An MP3 file can contain file information called  
“ID3 Tag” where its album name, performer, track  
title, etc. are recorded.  
There are two versions–ID3v1 (ID3 Tag version  
1) and ID3v2 (ID3 Tag version 2). This unit is  
compatible only with ID3v1.  
When shipped from the factory, TAG ON” is  
selected.  
TAG ON: Turns on the ID3 tag display while  
playing MP3 files.  
• SCRL ONCE:  
• SCRL AUTO:  
Scrolls only once.  
Repeats the scroll (5-second  
intervals in between).  
Cancels Auto Scroll.  
• SCRL OFF:  
• If an MP3 file does not have ID3  
tags, directory and file name  
appear.  
Selecting the external component to use  
EXT INPUT  
You can connect an external component to the  
CD changer jack on the rear using the Line Input  
Adapter KS-U57 (not supplied).  
To use the external component as the playback  
source through this unit, you need to select  
which component—CD changer or external  
component—to use.  
Note:  
If you change the setting from  
“TAG OFF” to “TAG ON” while  
playing an MP3 file, the tag display  
will be activated when the next file  
starts playing.  
When shipped from the factory, CD changer is  
selected as the external component.  
• CD CHANGER: To use the CD changer.  
TAG OFF: Turns off the ID3 tag display while  
playing MP3 files. (Only the  
directory name and file name can  
be shown.)  
• LINE INPUT:  
To use the external  
component other than CD  
changer.  
32  
Assigning names to the  
sources  
3 Select the character set you want  
while “ ” is flashing.  
Each time you press the  
button, the character set  
changes as follows:  
You can assign names to station frequencies,  
CDs, and the external component connected to  
the auxiliary (AUX) input jack.  
After assigning a name, it will appear on the  
display when you select the source.  
Capital letters (  
Small letters (  
)
)
Maximum number  
of the characters  
Sources  
Numbers and symbols (  
)
Station frequencies* Up to 10 characters  
(up to 32 station  
4 Select a character.  
frequencies including  
both FM and AM)  
About the available  
characters, see page 38.  
CDs** and  
CD changer**  
Up to 32 characters  
(up to 40 discs)  
External component Up to 10 characters  
(“AUX INPUT” only)  
5 Move the cursor to the next (or  
previous) character position.  
*
You cannot assign a name to a station frequency  
stored in the EX (extra) button.  
** You cannot assign a name to a CD Text or an MP3  
disc.  
1 Select a source you want to assign a  
name to.  
6 Repeat steps 3 to 5 until you finish  
When you select a  
source, the power  
automatically  
inputting the name.  
7 Finish the procedure while the last  
comes on.  
selected character is flashing.  
Each time you press the  
button, the source  
changes as described on  
page 7.  
To erase the input characters  
To erase all the characters at a time, press and  
hold DISP (display) for more than 1 second as  
described in the procedure above.  
2 Press and hold SEL (select) for more  
than 2 seconds while pressing DISP  
(display).  
Notes:  
• When you try to assign a name to the 33rd station  
frequency or 41st CD, “NAME FULL” appears on  
the display. (In this case, delete unwanted names  
before assignment.)  
• When the CD changer is connected, you can assign  
names to discs in the CD changer. These names can  
also be shown on the display if you insert the discs  
in this unit.  
(at the same time)  
33  
EXTERNAL COMPONENT OPERATIONS  
MD player, etc.  
You can connect two external components to this  
unit.  
Connect one to the auxiliary (AUX) input jack on  
the control panel, and the other to the CD  
changer jack on the rear.  
2 Turn on the connected component  
and start playing the source.  
3 Adjust the volume.  
Preparations:  
For connecting the Line Input Adapter KS-U57 and  
the external component, refer to the Installation/  
Connection Manual (separate volume).  
• Before operating the external component connected  
to the CD changer jack, select the external input  
correctly. (See “Selecting the external component to  
use—EXT INPUT” on page 32.)  
If the input level of the external component  
connected to the auxiliary (AUX) input jack  
is not high enough, increase the input level  
properly.  
Without adjusting the input level, you may be  
surprised at the loud sound when you change  
the source from one external component to  
another. (See “Adjusting the auxiliary input  
level—AUX ADJ” on page 32.)  
1 Select the external component.  
AUX INPUT: Press TAPE/AUX repeatedly to  
select the component  
connected to the AUX jack on  
the control panel.  
LINE INPUT: Press CD/CH repeatedly to  
select the component  
connected to the CD changer  
jack.  
• If “LINE INPUT” does not appear on the  
display, see page 32 and select the  
external input (“Selecting the external  
component to use—EXT INPUT”).  
34  
CD CHANGER OPERATIONS  
We recommend that you use one of the CH-X  
Note on One-Touch Operation:  
series with your unit (except for JVC MP3  
compatible CD changer.)  
If you have another CD automatic changer,  
consult your JVC IN-CAR ENTERTAINMENT  
dealer for connections.  
When you press CD/CH, the power automatically  
comes on. You do not have to press  
turn on the power.  
to  
ATT  
/
Note:  
For Example, if your CD automatic changer is one  
of the KD-MK series, you need a cord (KS-U15K)  
for connecting it to this unit.  
If you play a CD with assigned name (see page 33),  
the assigned name appears on the display, followed by  
the track number and elapsed playing time.  
Before operating your CD automatic changer:  
• Refer also to the Instructions supplied with  
your CD changer.  
• If no discs are in the magazine of the CD  
changer or the discs are inserted upside  
down, “NO DISC” will appear on the display. If  
this happens, remove the magazine and set  
the discs correctly.  
To change the display information  
While playing back a CD, you  
can change the information  
shown on the display.  
Each time you press DISP  
(display), the display changes to  
show the following:  
• If “RESET 1” – “RESET 8” appears on the  
display, something is wrong with the  
connection between this unit and the CD  
changer. If this happens, check the  
connection, connect the connecting cord(s)  
firmly if necessary, then press the reset  
button of the CD changer.  
Current track no.  
and Elapsed playing time  
Disc no. and  
Assigned name*  
Current track no.  
* If no name is assigned, NO NAMEwill  
appear.  
Playing CDs  
Select the CD automatic changer (CD-CH).  
Playback starts from the first  
track of the first disc.  
All tracks of all discs are played  
back.  
Track number Elapsed playing time  
35  
To fast-forward or reverse the track  
To go to a particular disc directly  
Press the number button corresponding to the  
disc number to start its playback (while CD  
changer is playing).  
Press and hold ¢  
while playing a CD, to fast-  
forward the track.  
Press and hold 4  
while playing a CD, to  
reverse the track.  
To select a disc number from 1 6:  
Press 1 (7) 6 (12) briefly.  
To go to the next or previous tracks  
To select a disc number from 7 12:  
Press and hold 1 (7) 6 (12) for more than  
1 second.  
Press ¢  
briefly while  
playing a CD, to go ahead to  
the beginning of the next  
track.  
Each time you press the  
button consecutively, the  
beginning of the next tracks  
is located and played back.  
Ex.: When disc number 3 is selected.  
Disc number Track number  
Press 4  
briefly while  
playing a CD, to go back to  
the beginning of the current  
track.  
Each time you press the  
button consecutively, the  
beginning of the previous  
tracks is located and played  
back.  
Track number Elapsed playing time  
36  
To play back only intro (Intro scan)  
Selecting CD playback modes  
1 Press MODE repeatedly until  
INTROappears.  
To play back tracks repeatedly (Repeat  
Play)  
REPEAT  
RANDOM  
INTRO  
Canceled  
(Continuous play)  
1 Press MODE repeatedly until  
REPEATappears.  
2 Press SEL (select).  
Each time you press the  
button, CD intro scan mode  
changes as follows:  
REPEAT  
RANDOM  
INTRO  
Canceled  
(Continuous play)  
2 Press SEL (select).  
Each time you press the  
button, CD repeat play mode  
changes as follows:  
INTRO1 ON  
INTRO2 ON  
INTRO OFF  
REPEAT1 ON  
REPEAT2 ON  
Plays the  
REPEAT OFF  
Mode  
Indicator  
beginnings  
(15 seconds)  
RPT  
Indicator  
Mode  
Plays repeatedly  
INTRO1 ON Track number Of all tracks on all  
flashes inserted discs.  
REPEAT1 ON Lights  
The current track (or  
specified track).  
INTRO2 ON Disc number Of the first track on  
flashes  
each inserted disc.  
REPEAT2 ON Flashes All tracks of the current  
disc (or specified disc).  
INTRO OFF None  
Canceled.  
REPEAT OFF Goes off Canceled.  
Track number  
To play back tracks at random  
(Random Play)  
1 Press MODE repeatedly until  
RANDOMappears.  
Ex.: When INTRO1 ONis selected.  
REPEAT  
RANDOM  
INTRO  
Canceled  
Disc number  
(Continuous play)  
2 Press SEL (select).  
Each time you press the  
button, CD random play mode  
changes as follows:  
RANDOM1 ON  
RANDOM2 ON  
Ex.: When INTRO2 ONis selected.  
RANDOM OFF  
RND  
Indicator  
Mode  
Plays at random  
RANDOM1 ON Lights  
All tracks of the  
current disc, then the  
tracks of the next  
disc, and so on.  
RANDOM2 ON Flashes All tracks of all discs  
inserted in the  
magazine.  
RANDOM OFF Goes off Canceled.  
37  
ADDITIONAL INFORMATION  
To clean the heads  
Available characters  
You can use the following characters to  
assign names to station frequencies, CDs,  
and external component. (See page 33.)  
You can display the information (album title,  
performer name, song title, etc.) as ID3v1  
tags when you playback an MP3 file with this  
unit. (See pages 16 and 41.)  
Capital letters  
A
F
K
P
U
B
G
C
H
M
R
W
D
I
E
J
• Clean the heads after every 10 hours of use  
using a wet-type head cleaning tape (available  
at an audio store).  
When the head becomes dirty, you may realize  
the following symptoms:  
L
N
S
X
O
T
Y
Q
V
– Sound quality is reduced.  
– Sound level decreases.  
space  
Z
– Sound drops out.  
Small letters  
• Do not play dirty or dusty tapes.  
• Do not touch the highly-polished head with any  
metallic or magnetic tools.  
a
b
c
d
i
e
j
f
g
h
m
r
k
p
u
l
n
s
x
o
t
To keep the tape clean  
• Always store the tapes in  
their storage cases after  
use.  
• Do not store tapes in the  
following places:  
– Subject to direct sunlight  
– With high humidity  
– At extremely hot temperatures  
q
v
w
y
space  
z
Numbers and symbols  
0
5
!
1
6
2
7
#
(
3
8
$
)
4
9
CAUTIONS:  
%
• Do not play the tapes with peeling labels;  
otherwise, they can damage the unit.  
• Tighten tapes to remove slack since loose tape  
may become entangled with the mechanism.  
• Do not leave a cassette in the cassette  
compartment after use, as the tape may become  
slack.  
&
+
*
/
,
.
<
:
;
=
>
space  
?
@
_
`
The function below is also provided to ensure the  
longer life of the cassette deck.  
Handling cassettes  
Ignition key-off release  
When you turn off the ignition key with a cassette  
in the compartment, the unit automatically  
releases the tape from its head.  
The cassette deck built in this unit requires very  
little attention, but you will be able to extend the  
life of the cassette deck if you follow the  
instructions in the column to the right.  
38  
When playing a CD-R or CD-RW  
Handling discs  
Before playing back CD-Rs or CD-RWs, read  
their instructions or cautions carefully.  
Use only finalizedCD-Rs or CD-RWs.  
Some CD-Rs or CD-RWs may not play back on  
this unit because of their disc characteristics,  
and for the following reasons:  
This unit has been designed to reproduce CDs,  
CD-Rs (Recordable), CD-RWs (Rewritable), and  
CD Texts.  
• This unit is also compatible with MP3 discs.  
Discs are dirty or scratched.  
Moisture condensation on the lens inside  
the unit.  
The pickup lens inside the unit is dirty.  
CD-RWs may require a longer readout time  
since the reflectance of CD-RWs is lower than  
that of regular CDs.  
CD-Rs or CD-RWs are susceptible to high  
temperatures or high humidity, so do not leave  
them inside your car.  
How to handle discs  
Center holder  
When removing a disc  
from its case, press down  
the center holder of the case  
and lift the disc out, holding it  
by the edges.  
Always hold the disc by the  
edges. Do not touch its recording surface.  
When storing a disc into its case, gently insert  
the disc around the center holder (with the  
printed surface facing up).  
Do not use following CD-Rs or CD-RWs:  
Discs with stickers, labels, or protective seal  
stuck to the surface.  
Make sure to store discs in their cases after use.  
Discs on which labels can be directly printed  
by an ink jet printer.  
Using these discs under high temperatures or  
high humidity may cause malfunctions or  
damage to discs. For example,  
To keep discs clean  
A dirty disc may not play  
correctly. If a disc does  
becomes dirty, wipe it with a  
soft cloth in a straight line from  
center to edge.  
Stickers or labels may shrink and warp a  
disc.  
Stickers or labels may peel off so discs  
cannot be ejected.  
Print on discs may get sticky.  
Read instructions or cautions about labels and  
printable discs carefully.  
To play new discs  
New discs may have some  
rough spots around the inner  
and outer edges.  
If such a disc is used, this unit  
may reject the disc.  
CAUTIONS:  
To remove these rough spots,  
rub the edges with a pencil or ball-point pen, etc.  
• Do not insert 8 cm discs (single CDs) into the  
loading slot. (Such discs cannot be ejected.)  
• Do not insert any disc of unusual shape—like a  
heart or flower; otherwise, the unit will  
malfunction.  
• Do not expose discs to direct sunlight or any  
heat source or place them in a place subject to  
high temperature and humidity. Do not leave  
them in a car.  
Moisture condensation  
Moisture may condense on the lens inside the  
CD player in the following cases:  
After starting the heater in the car.  
If it becomes very humid inside the car.  
Should this occur, the CD player may  
malfunction. In this case, eject the disc and leave  
the unit turned on for a few hours until the  
moisture evaporates.  
• Do not use any solvent (for example,  
conventional record cleaner, spray, thinner,  
benzine, etc.) to clean discs.  
Stick-on  
Sticker  
Sticker  
label  
Warped  
disc  
Disc  
residue  
39  
TROUBLESHOOTING  
What appears to be trouble is not always serious. Check the following points before calling a service  
center.  
Symptoms  
Causes  
Remedies  
Sound is sometimes  
interrupted.  
Connections are not good.  
Check the cords and  
connections.  
Sound cannot be heard  
from the speakers.  
The volume control is turned  
to the minimum level.  
Adjust it to the optimum level.  
Connections are incorrect.  
Check the cords and  
connections.  
This unit does not work at  
all.  
The built-in microcomputer  
may have functioned  
Press the reset button on the  
front panel (see page 2.)  
incorrectly due to noise, etc.  
SSM (Strong-station  
Sequential Memory)  
automatic preset does not  
work.  
Signals are too weak.  
Store stations manually.  
Static noise while listening  
to the radio.  
The aerial is not connected  
firmly.  
Connect the aerial firmly.  
Disc cannot be played back. Disc is inserted upside down. Insert the disc correctly.  
Disc sound is sometimes  
interrupted.  
You are driving on rough  
roads.  
Stop disc play while driving on  
rough roads.  
Disc is scratched.  
Change the disc.  
Connections are incorrect.  
Check the cords and  
connections.  
• “NO DISCappears on the  
display.  
No disc is in the loading slot  
(or in the magazine.)  
Insert a disc into the loading  
slot.  
Disc is inserted incorrectly.  
Insert the disc correctly.  
Press and hold both the  
Disc can neither be played  
The CD player may be  
functioning incorrectly.  
back nor ejected.  
and CD 0 buttons at  
/ATT  
the same time for several  
seconds.  
• “EJECT ERRappears on  
the display.  
The disc was interrupted  
ejection or insertion.  
Press CD 0, or press both the  
and CD 0 buttons  
/ATT  
together to clear the message.  
CD-R/CD-RW cannot be  
played back.  
Tracks on the CD-R/CD-RW  
cannot be skipped.  
CD-R/CD-RW is not finalized. Insert a finalized CD-R/  
CD-RW.  
Finalize the CD-R/CD-RW  
with the component which you  
used for recording.  
40  
Symptoms  
Causes  
Remedies  
Disc cannot be played back. No MP3 files are recorded on Change the disc.  
the disc.  
MP3 files do not have the  
Add the extension code  
extension codemp3 in their mp3 to their file names.  
file names.  
MP3 files are not recorded in  
Change the disc.  
the format compliant with ISO (Record MP3 files using a  
9660 Level 1 or 2.  
compliant application.)  
Files skip, or 0000”  
appears and playback  
stops.  
Files are encoded in Layer 1  
or Layer 2 format.  
Insert a disc that contains files  
encoded in Layer 3 format.  
Noise is generated.  
The file played back is not an Skip to another file or change  
MP3 file (although it has the  
extension codemp3).  
the disc. (Do not add the  
extension codemp3 to non-  
MP3 files.)  
A longer readout time is  
required (FILE CHECK”  
keeps flashing on the  
display).  
Readout time varies due to  
the complexity of the  
directory/file configuration.  
Do not use too many  
hierarchies and directories.  
Also, do not record any other  
types of audio tracks together  
with MP3 files.  
Files cannot be played back Playback order is determined  
as you have intended them  
to play.  
when the files are recorded.  
Elapsed playing time is not  
correct.  
This sometimes occurs during  
play. This is caused by how  
the files are recorded on the  
disc.  
• “MP3flashes on the  
display.  
There are no MP3 files in the  
current directory.  
Select another directory.  
• “NO FILESappears on the There are no MP3 files in this Insert a disc that contains MP3  
display for a while, then the  
disc ejects automatically.  
disc.  
files.  
Correct characters are not  
This unit can only display  
displayed. (Tag Display, e.g. alphabet (capital: AZ, small:  
album name) az) and numbers.  
41  
Symptoms  
Causes  
Remedies  
A cassette tape cannot be  
inserted.  
You have tried to insert a  
cassette in the wrong way.  
Insert the cassette with the  
exposed tape facing right.  
Cassette tapes become hot. This is not a malfunction.  
Tape sound is at very low  
level and sound quality is  
degraded.  
The tape head is dirty.  
Clean it with a head cleaning  
tape.  
• “NO MAGAZINEappears  
on the display.  
No magazine is loaded in the  
CD changer.  
Insert the magazine.  
• “RESET 8appears on the  
display.  
This unit is not connected to a  
CD changer correctly.  
Connect this unit and the CD  
changer correctly and press  
the reset button of the CD  
changer.  
• “RESET 1” – “RESET 7”  
appears on the display.  
Press the reset button of the  
CD changer.  
The CD changer does not  
work at all.  
The built-in microcomputer may  
function incorrectly due to noise, front panel (see page 2.)  
etc.  
Press the reset button on the  
About mistracking:  
Mistracking may result from driving on extremely rough roads. This does not damage the  
unit and the CD, but will be annoying. We recommend that you stop CD play while  
driving on such rough roads.  
42  
SPECIFICATIONS  
CD PLAYER SECTION  
AUDIO AMPLIFIER SECTION  
Maximum Power Output:  
Type: Compact disc player  
Front:  
Rear:  
45 W per channel  
45 W per channel  
Signal Detection System: Non-contact optical  
pickup (semiconductor laser)  
Continuous Power Output (RMS):  
Number of channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Dynamic Range: 96 dB  
Front:  
17 W per channel into 4 ,  
40 Hz to 20 000 Hz at no more  
than 0.8% total harmonic  
distortion.  
Signal-to-Noise Ratio: 98 dB  
Wow and Flutter: Less than measurable limit  
MP3 decoding format: MPEG1/2 Audio Layer 3  
Max. Bit Rate: 320 Kbps  
Rear:  
17 W per channel into 4 ,  
40 Hz to 20 000 Hz at no more  
than 0.8% total harmonic  
distortion.  
CASSETTE DECK SECTION  
Load Impedance: 4 (4 to 8 allowance)  
Equalizer Control Range:  
Wow and Flutter: 0.1 % (WRMS)  
Fast-Wind Time: 100 sec. (C-60)  
Frequency Response: 30 Hz to 16 000 Hz  
(Normal tape)  
Signal-to-Noise Ratio: (Normal tape)  
Dolby B NR ON: 65 dB  
LOW:  
MID:  
HIGH:  
12 dB (50 Hz, 80 Hz, 120 Hz)  
12 dB (700 Hz, 1 kHz, 2 kHz)  
12 dB (8 kHz, 12 kHz)  
Frequency Response: 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio: 70 dB  
Auxiliary input jack: 3.5 mm dia. stereo mini jack  
Line-Out Level/Impedance:  
Dolby B NR OFF: 56 dB  
Stereo Separation: 40 dB  
2.0 V/20 kload (full scale)  
Output Impedance: 1 kΩ  
GENERAL  
Power Requirement:  
TUNER SECTION  
Frequency Range:  
Operating Voltage: DC 14.4 V  
(11 V to 16 V allowance)  
Grounding System: Negative ground  
Allowable Operating Temperature:  
0°C to +40°C  
FM:  
AM:  
87.5 MHz to 108.0 MHz  
531 kHz to 1 602 kHz  
Dimensions (W x H x D):  
Installation Size:  
178 mm x 100 mm x 150 mm  
Front Panel Size:  
170 mm x 96 mm x 20 mm  
Mass: 2.2 kg (excluding accessories)  
[FM Tuner]  
Usable Sensitivity: 11.3 dBf (1.0 µV/75 )  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 )  
Alternate Channel Selectivity (400 kHz):  
65 dB  
Frequency Response: 40 Hz to 15 000 Hz  
Stereo Separation: 35 dB  
Capture Ratio: 1.5 dB  
Design and specifications are subject to change  
without notice.  
[AM Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
43  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
Затруднения при эксплуатации?  
Пожалуйста, перезагрузите Ваше  
устройство  
Для получения информации о перезагрузке Вашего  
устройства обратитесь на соответствующую страницу  
VICTOR COMPANY OF JAPAN, LIMITED  
J
C
V
EN, RU  
0603MNMMDWJEIN  
© 2003 VICTOR COMPANY OF JAPAN, LIMITED  
LVT1099-003A  
[EE]  
0603MNMMDWJEIN  
EN, RU  
J
C
V
ENGLISH  
РУCCKИЙ  
Questions and Answers — Music File MP3  
Вопросы и ответы – Музыкальный файл MP3  
This sheet is provided for MP3 compatible CD changers and receivers.  
Данная брошюра поставляется с MP3-совместимыми проигрывателями компакт-  
дисков и принимающими устройствами.  
Q1 What is MP3?  
B. 1 Что такое МР3?  
MP3, so-called “MPEG Audio Layer 3,is one of digital compression standards for specifying the  
audio part of moving-picture compression standard “MPEG.MP3 can compress music data to  
about one-tenth of the original size. Compared with conventional CDs which can only record up to  
74 minutes worth of music data, if you write MP3 files to 650 MB CD-Rs/RWs, music data worth of  
about 10 CDs can be stored on a disc (at a bit rate of 128 Kbps).  
МР3, так называемый “Звуковой слой 3 MPEG, представляет собой один из стандартов  
цифрового уплотнения, предназначенный для обозначения звуковой части стандарта  
сжатия киноизображения “MPEG.” МР3 может уплотнять музыкальные данные до примерно  
одной десятой первоначального размера. По сравнению с традиционными компакт-  
дисками, на которые можно записывать только до 74 минут музыкальных данных, при  
записи файлов MP3 на компакт-диски однократной записи и перезаписываемые компакт-  
диски на 650 мегабайт на одном диске можно записать музыкальные данные в объеме,  
равном примерно 10 компакт-дискам (при скорости передачи битов 128 Кбит/с).  
Q2 What type of MP3 files can be played back on this player?  
MP3 files placed on CD media (CD-ROM, CD-R or CD-RW) can be played back.  
When creating MP3 discs using your computer, CD-R/RW drive and writing software, you have to  
observe the following precautions:  
B. 2 Какой тип файлов МР3 можно воспроизводить на  
данном проигрывателе?  
• When writing MP3 files to CD media, you are recommended to use Joliet, ISO 9660 Level 1, or  
ISO 9660 Level 2 as your CD format. With any other file formats, folder/file names may not be  
correctly displayed.  
• Be sure to add a file extension [.MP3] to any MP3 files. This player cannot play back files with no  
extension [.MP3] even if they are actually MP3 files. Furthermore, files created in non-MP3  
format cannot properly be played back even if they have file extensions [.MP3] in their file names.  
• This player is not compatible with the data encoded with Layer 1 and 2 formats.  
Можно воспроизводить файлы МР3, записанные на различные компакт-диски (компакт-  
диск постоянной памяти, компакт-диск однократной записи или перезаписываемый  
компакт-диск). При создании дисков МР3 с помощью Вашего компьютера, дисковода  
компакт-дисков однократной записи/ перезаписываемых компакт-дисков и программного  
обеспечения для записи Вы должны соблюдать следующие меры предосторожности:  
При записи файлов МР3 на компакт-диск Вам рекомендуется использовать Joliet,  
уровень 1 ISO 9660 или уровень 2 ISO 9660 в качестве формата Вашего компакт-диска. В  
любых других форматах файлов названия папок/файлов могут быть показаны  
неправильно.  
Q3 Is there any limit on the number of folders and files?  
This player can handle a maximum of 289* folders and files. If a disc includes more than the  
maximum, this player cannot handle surplus folders and files. Folders with no MP3 files included  
and files with no extension [.MP3] are disregarded.  
Не забудьте добавить расширение имени файла [.МР3] к любым файлам МР3. Данный  
проигрыватель не может воспроизводить файлы без расширения имени [.MP3], даже если  
они действительно являются файлами МР3. Более того, файлы, созданные не в формате  
МР3, невозможно правильно воспроизводить, даже если они имеют расширение имени  
файла [.MP3] в своих названиях файлов.  
• This player has such a feature that allows you to repeatedly play back the files in a desired folder  
or randomly play back the files from a disc. So, when creating MP3 discs, if you make folders by  
artist or album and insert the related MP3 files into them, you can realize such convenience in  
use as you would experience with a CD changer.  
* This number is for a CD receiver. For a CD changer, the maximum number is 512.  
• Данный проигрыватель не совместим с данными, закодированными в форматах слоя 1 и 2.  
Q4 Can MP3 discs with many hierarchy levels be played back?  
B. 3 Имеется ли какое-либо ограничение по  
количеству папок и файлов?  
There is no limit on the number of the hierarchy levels. However, up to 8 hierarchy levels is  
recommended for stable operations.  
Данный проигрыватель может обработать максимум 289* папок и файлов. Если на диске  
записано больше этого максимума, данный проигрыватель не может обработать излишнее  
количество папок и файлов. Папок, в которые не включены файлы МР3, и файлы без  
расширения имени файла [.MP3] игнорируются.  
Q5 Can 80-minute discs (capacity: 700 MB) be utilized?  
Yes, they can (but not for the discs of any longer time than 80 minutes).  
Данный проигрыватель обладает такой функциональной возможностью, которая  
позволяет Вам повторно воспроизводить файлы в желаемой папке или воспроизводить в  
произвольном порядке файлы на диске. Таким образом, при создании дисков МР3, если  
Вы делаете папка по артисту или альбому и вставляете туда относящиеся к этому файлы  
МР3, Вы можете добиться такого же удобства при пользовании, которое Вы имеете, когда  
пользуетесь проигрывателем-автоматом компакт-дисков.  
Q6 Can CD-Rs/RWs including both music CD data (CD-DA) and MP3 data be  
played back?  
Only data of the first recognized type is played back.  
Q7 Can CD-Rs/RWs with MP3 data added later (multi-session discs) be  
played back?  
* Это число относится к принимающему устройству компакт-дисков. Для проигрывателя  
компакт-дисков максимальным числом является 512.  
Yes, they can.  
Be sure to perform session closeon such discs; otherwise, an unclosed session cannot be  
detected and cannot be played back.  
B. 4 Можно ли воспроизводить диски МР3 со многими  
уровнями иерархии?  
Не существует ограничения по количеству уровней иерархии. Однако, для стабильной  
работы рекомендуется использовать до 8 уровней иерархии.  
Q8 Is this player compatible with “Emphasis”?  
Yes, it is.  
B. 5 Можно ли использовать 80-минутные диски  
Q9 What sampling frequency range can be handled?  
A sampling frequency range of 16 kHz 48 kHz can be handled.  
(емкость: 700 Мбайт)?  
Да, можно (но не диски на более чем 80 минут).  
B. 6 Можно ли воспроизводить компакт-диски  
однократной записи и перезаписываемые  
компакт-диски, включающие данные  
музыкальных компакт-дисков (CD-DA) и данные  
But depending on the type of the encoder used, playback may not take place correctly.  
МР3?  
Воспроизводятся только данные первого распознанного типа.  
B. 7 Можно ли воспроизводить компакт-диски  
однократной записи и перезаписываемые  
компакт-диски, на которые данные МР3 были  
добавлены позднее (многосеансовые диски)?  
Да, можно.  
Нужно обязательно выполнять “сеанс закрыт” на таких дисках, иначе незакрытые  
сеансы нельзя будет обнаружить и нельзя будет воспроизвести.  
B. 8 Совместим ли данный проигрыватель с  
“Emphasis”?  
Да, совместим.  
B. 9 Kакой диапазон частот дискретизации может  
быть обработан?  
Может быть обработан диапазон частот дискретизации 16 кГц – 48 кГц.  
Но в зависимости от типа применяемого кодирующего устройства воспроизведение может  
происходить неправильно.  
Q10 Is there any bit-rate related constraint on MP3 file playback?  
B. 10 Есть ли какое-либо связанное со скоростью  
передачи битов ограничение при  
There is no particular constraint, but you are recommended to use a stereo with a bit rate of  
128 Kbps or over in terms of sound quality. This player can also handle VBR (variable bit rate).  
воспроизведении файлов МР3?  
Какого-либо конкретного ограничения нет, но Вам рекомендуется использовать стерео со  
скоростью передачи битов 128 Кбит/с или более в отношении качества звука. Данный  
проигрыватель может также обрабатывать VBR (переменный поток данных).  
Q11 Is the player compatible with M3U playlist?  
No, it isnt.  
Q12 Is the player compatible with ID3 Tag?  
B. 11 Совместим ли данный проигрыватель со списком  
It is compatible with ID3 Tag Version 1. But be careful as the player isnt compatible with Version 2.  
The one-byte letters, numbers and symbols listed below can be recognized (except for some  
models).  
воспроизведения М3U?  
Нет, не совместим.  
For more precise information on the available characters, see the Instructions supplied.  
B. 12 Совместим ли данный проигрыватель с тегом  
ID3?  
Capital letters  
Small letters  
Numbers and symbols  
A
F
K
P
U
Z
B
G
C
H
D
I
E
J
O
T
Y
a
f
k
p
u
z
b
g
c
h
d
i
e
j
o
t
0
5
!
&
+
:
1
6
,
2
7
#
(
-
<
_
3
8
$
)
.
=
`
4
9
%
*
/
>
Он совместим с тегом ID3, вариант 1. Но необходимо соблюдать осторожность, поскольку  
данный проигрыватель не совместим с вариантом 2. Однобайтные буквы, числа и символы,  
перечисленные ниже, могут распознаваться (за исключением некоторых моделей).  
Более точную информацию относительно имеющихся знаков смотрите в прилагаемых  
Инструкциях.  
L
Q
V
M
R
W
N
S
X
l
q
v
m
r
w
n
s
x
y
Space  
Space  
;
Заглавные буквы  
Строчные буквы  
Числа и символы  
?
@
Space  
A
F
K
P
U
Z
B
G
L
Q
V
C
H
M
R
D
I
N
S
X
E
J
O
T
Y
a
f
k
p
u
z
b
g
l
q
v
c
h
m
r
d
i
n
s
x
e
j
o
t
0
5
!
&
+
:
1
6
,
2
7
#
(
-
<
_
3
8
$
)
.
=
`
4
9
%
*
/
>
Q13 MP3 folder/file names displayed are different from those given at the  
time of MP3 disc creation (names displayed on computers)…?  
W
w
y
With this player, folder/file names are displayed as follows:  
Промежуток  
Промежуток  
;
@
Folder/file names can be displayed by scrolling, if necessary.  
This player is compatible with Joliet, ISO 9660 Level 1, ISO 9660 Level 2, and Romeo folder/file  
names. (Up to 128* character will be displayed for Romeo format.)  
This player can handle only one-byte characters. Any other characters cannot be correctly  
displayed.  
Промежуток  
?
B. 13 Отличаются ли показываемые на экране дисплея  
названия папок/файлов МР3 от тех, которые даны  
во время создания диска МР3 (названия,  
* When operating a CD changer, this maximum number decreases to 64 for a disc including more  
than 290 folder and files in total.  
Q14 MP3 files cannot be played back…?  
показываемые на компьютерах)…?  
Playback is not possible in the following cases:  
С данным проигрывателем названия папок/файлов на экране дисплея показываются  
следующим образом:  
The Packet Writemethod is used to record on CD-Rs/RWs.  
The file extension is not [.MP3].  
The file encoded with Layer 1 or Layer 2 (even if extension is [.MP3]).  
The file data is not in MP3 data format.  
Playback may not be possible, depending on recording conditions (data missing, etc.) or media  
conditions (stain, scratch, warp, etc.).  
Названия папок/файлов могут показываться на экране дисплея путем прокрутки, если  
требуется.  
Данный проигрыватель совместим с названиями папок/файлов Joliet, ISO 9660 уровня 1,  
ISO 9660 уровня 2 и Romeo. (В формате Romeo на экране дисплея будет показано до  
128* знаков.)  
Данный проигрыватель может обрабатывать только однобайтные знаки. Любые другие  
знаки невозможно правильно изобразить на экране дисплея.  
* При работе проигрывателя компакт-дисков это максимальное число снижается до  
64 для диска,включающего в общей сложности более 290 папок и файлов.  
Q15 An MP3 disc requires a long readout time…?  
When an MP3 disc is inserted, information inside the disc (number of folders and files, and  
positions of data) is first read.  
So, in the following cases, a fairly long time may be needed before playback starts:  
If the file structure is complicated,  
If the number of files is large, or  
B. 14 Файлы МР3 невозможно воспроизводить…?  
Воспроизведение невозможно в следующих случаях:  
If the number of sessions is large (in case of multi-session discs).  
Для записи на компакт-дисках однократной записи и перезаписываемых компакт-дисках  
используется метод “Packet Write” [“пакетная запись”].  
Расширение имени файла - не [.MP3].  
Файл закодирован со слоем 1 или слоем 2 (даже если расширение имени - [.MP3]).  
Данные файла записаны не в формате данных МР3.  
Q16 There occurs sound interruption or sound skipping…?  
Sound interruption or sound skipping may occur, depending on recording conditions (missing data,  
etc.) or media conditions (stain, scratch, warp, etc.).  
Воспроизведение невозможно, в зависимости от условий записи (отсутствуют данные и  
т.п.) или состояния носителя (пятно, царапина, деформация и т.п.).  
Q17 Can WAV files be played back?  
No, they cant. WAV files cannot be handled.  
B. 15 Диск МР3 требует длительного времени  
считывания?  
Q18 Can such compression formats as WMA and ATRACK 3 be played back?  
No, they cant.  
Когда вставлен диск МР3, сначала считывается информация внутри такого диска  
(количество папок и файлов, а также местоположение данных).  
Таким образом, в следующих случаях может пройти довольно длительное время до того,  
как начнется воспроизведение:  
Q19 MP3 files are not played back in an intended order…?  
The playback order of MP3 files may differ from your intended order since your writing software  
may rearrange the order of folders and files when writing to CD-Rs/RWs.  
Если структура файла является сложной,  
Если количество файлов большое, или  
Если имеется большое количество сеансов (в случае многосеансовых дисков).  
Q20 Are there any functions restrained during MP3 playback?  
The search function works but search speed is not constant during search.  
When skip is tried at the last file in a folder, the next folder is selected.  
B. 16 Имеют ли место случаи перерыва или пропуска  
звука?  
Q21 Elapsed playing time is not displayed correctly…?  
Перерывы звука или пропуски звука могут случаться, в зависимости от условий записи  
(отсутствуют данные и т.п.) или состояния носителя (пятно, царапина, деформация и т.п.).  
Files recorded in VBR (variable bit rate) have a discrepancy in elapsed time display, and do not  
show the actual passage of time. Especially, after performing the search function, this difference  
becomes noticeable.  
B. 17 Можно ли воспроизводить файлы WAV (звуковые  
файлы)?  
Нет, нельзя. Файлы WAV не могут быть обработаны.  
B. 18 Могут ли воспроизводиться такие форматы  
сжатия, как WMA и ATRACK 3?  
Нет, не могут.  
B. 19 Файлы МР3 не воспроизводятся в  
запланированном порядке…?  
Порядок воспроизведения файлов МР3 может отличаться от запланированного Вами  
порядка, поскольку используемое Вами программное обеспечение записи может  
переделать порядок папок и файлов при записи на компакт-дисках однократной записи и  
перезаписываемых компакт-дисках.  
B. 20 Ограничивается ли действие каких-либо функций  
во время воспроизведения МР3?  
Функция поиска работает, но скорость поиска непостоянна во время поиска.  
При попытке перейти на последний файл в какой-либо папке выбирается следующая  
папка.  
B. 21 Истекшее время воспроизведение не  
показывается правильно на экране дисплея…?  
Файлы, записанные в VBR (переменный поток данных), имеют расхождение в показе на  
экране дисплея истекшего времени и не показывают фактически прошедшее время. Эта  
разница становится особенно заметной после выполнения функции поиска.  
KW-XC939  
Installation/Connection Manual  
Руководство по установке/подключению  
LVT1099-002A  
[EE]  
0603MNMMDWJEIN  
EN, RU  
J
C
V
ENGLISH  
РУССКИЙ  
• Это устройство разработано для эксплуатации на 12 В постоянного напряжения с  
минусом на массе.  
• This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems.  
УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ)  
INSTALLATION (IN-DASH MOUNTING)  
На следующей иллюстрации показана типовая установка. Однако возможны  
дополнительные регулировки в соответствии с определенным автомобилем. В этом случае  
обратитесь к руководству, включенному в монтажный комплект (поставляется отдельно).  
В некоторых случаях, в зависимости от типа и модели автомобиля, устройство можно  
установить на центральной панели.  
The following illustration shows a typical installation. However, you should make adjustments  
corresponding to your specific car. In this case consult the manual included with the installation kit  
(option).  
In some case, depending of the type and the model of your car, it is not possible to install the unit  
into the center console.  
При появлении вопросов или при необходимости получения информации относительно  
монтажных комплектов обратитесь к поставщику автомобильных аудиосистем компании  
JVC IN-CAR ENTERTAINMENT или в компанию, поставляющую монтажные комплекты.  
If you have any questions or require information regarding installation kits, consult your JVC  
IN-CAR ENTERTAINMENT dealer or a company supplying kits.  
Before installing the unit  
To prevent short circuits, it is recommended to disconnect the battery’s negative terminal and  
make all electrical connections before installing the unit.  
• For reason of security, do not install the unit in a place where it may disturb your driving or where  
there is not enough ventilation space around the unit.  
• When the installation position has been determined, confirm that the cords are sufficiently long.  
• When mounting the unit, be sure to use the screws provided, as instructed. If other screws are  
used, there is a possibility that parts could become loose or damaged.  
Перед установкой устройства  
• Для предотвращения коротких замыканий рекомендуется отключить отрицательный  
терминал аккумуляторной батареи и выполнить все электрические соединения перед  
установкой устройства.  
• В целях безопасности не устанавливайте данное устройство в местах, где оно может  
помешать вождению или в местах с недостаточной вентиляцией.  
• После определения места установки проверьте, достаточна ли длина кабелей.  
• При установке устройства используйте только прилагаемые болты в соответствии с  
инструкцией. В случае использования других болтов существует вероятность, что детали  
могут быть потеряны или повреждены.  
• If you are not sure how to install this unit correctly, consult a JVC IN-CAR ENTERTAINMENT  
dealer or have it installed by a qualified technician.  
• When tightening screws or bolts be careful not to pinch any connection cord.  
• Если нет уверенности в том, как правильно установить устройство, обратитесь за  
консультацией к поставщику автомобильных аудиосистем компании JVC IN-CAR  
ENTERTAINMENT или к квалифицированному техническому специалисту.  
• Аккуратно затягивайте болты, чтобы не пережать соединительные кабели.  
Caution:  
To install the mounting brackets to the unit, use only the supplied screws (M5 x 6 mm).  
If you use any screw longer than 6 mm, the unit can be damaged.  
Внимание:  
Для прикрепления крепежных скоб к устройству используйте только прилагаемые болты  
(M5 x 6 мм). Использование любых болтов длиной более 6 мм может привести к  
повреждению устройства.  
After installing the unit  
Check if all the brake lamps, lights, flasher, wiper, etc. work correctly.  
После установки устройства  
Убедитесь, что стоп-сигналы, фары, поворотники, дворники и т.п. устройства работают  
корректно.  
Parts list for installation and connection  
The following parts are provided with this unit.  
After checking them, please set them correctly.  
Список деталей для установки и подключения  
Следующие детали поставлены в комплекте с устройством.  
После проверки комплектации, пожалуйста, установите их правильно.  
Flat countersunk screws (M5 x 6 mm)  
Болты с плоской потайной головкой  
(M5 x 6 мм)  
CR2025  
Power cord  
Кабель питания  
Plate for use with a Nissan car  
Пластина для автомобилей  
марки Nissan  
Batteries  
Батарейка  
Remote controller  
дистанционного управления  
Binding screws (M5 x 6 mm)  
Зажимные болты (M5 x 6 мм)  
TROUBLESHOOTING  
BЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ  
Сработал предохранитель.  
* Правильно ли подключены черный и красный провода?  
The fuse blows.  
* Are the red and black leads connected correctly?  
Питание не включается.  
* Подключен ли желтый провод?  
Power cannot be turned on.  
* Is the yellow lead connected?  
Звук не выводится через громкоговорители.  
* Нет ли короткого замыкания на кабеле выхода громкоговорителей?  
No sound from the speakers.  
* Is the speaker output lead short-circuited?  
Звук искажен.  
Sound is distorted.  
* Заземлен ли провод выхода громкоговорителей?  
* Заземлены ли разъемы “–” правого (R) и левого (L) громкоговорителей?  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
Устройство нагревается.  
* Заземлен ли провод выхода громкоговорителей?  
* Заземлены ли разъемы “–” правого (R) и левого (L) громкоговорителей?  
Unit becomes hot.  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
1
1 Remove the audio system originally installed.  
1 Извлеките первоначально установленную аудиосистему.  
Note: Be sure to keep all the screws and parts removed from your car. They are to be used in  
Примечание: Убедитесь, что все болты и детали системы извлечены из автомобиля.  
the future.  
Они понадобятся в дальнейшем.  
2 Install the mounting brackets, removed from the car, to this unit.  
3 Connect the wires (see the diagrams on the reverse side).  
4 Fix this unit to the car using the screws removed in step 1.  
2 Прикрепите извлеченные из автомобиля крепежные скобы к данному устройству.  
3 Подключите провода (см. схемы на обратной стороне).  
4 Закрепите данное устройство в машине с помощью извлеченных в действии 1 болтов.  
The following example shown is for installation in a Toyota.  
For more details, consult your JVC IN-CAR ENTERTAINMENT dealer.  
На следующем рисунке показана установка устройства в автомобиле марки  
Toyota.  
За более подробной информацией обратитесь к поставщику  
автомобильных аудиосистем компании JVC IN-CAR ENTERTAINMENT.  
Screws supplied with this unit  
Болты, поставляемые с данным  
устройством  
Screws supplied with this unit:  
Select the proper screw type, fitting to your car.  
Болты, поставляемые с данным  
устройством:  
Подберите подходящий для автомобиля тип  
болта.  
Securely connect the ground wire to the metal body  
of the car using the screw originally fixed to the  
metal body of the car.  
Плотно прикрепите заземляющий провод к  
металлическим частям автомобиля с помощью  
уже имеющихся там болтов.  
Mounting bracket removed from  
the car  
Извлеченные из автомобиля  
крепежные скобы  
Binding screw  
(M5 x 6 mm)  
Зажимной болт  
(M5 x 6 мм)  
Flat countersunk screw  
(M5 x 6 mm)  
Болт с плоской  
потайной головкой  
(M5 x 6 мм)  
Mounting bracket removed  
from the car  
Извлеченные из автомобиля  
крепежные скобы  
Screw removed from the car in step 1  
Болты, извлеченные из  
автомобиля в действии 1  
Screws supplied with this unit  
Болты, поставляемые с  
данным устройством  
Install the unit at an angle of less than 30°.  
Установите устройство под углом менее 30°.  
Less than 30˚  
Менее 30°  
If there is an interfering tab on the mounting bracket, bent it flat.  
Если на крепежных скобах есть мешающие установке уголковые  
фиксаторы, разогните их.  
Fix the supplied plate as illustrated.  
Закрепите прилагаемую пластину, как показано на рисунке.  
When installing the unit in a Nissan car.  
Установка устройства в автомобиле марки Nissan.  
Plate for use with a Nissan car  
Пластина для автомобилей  
марки Nissan  
ELECTRICAL CONNECTIONS  
ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ  
Для предотвращения коротких замыканий мы рекомендуем Вам отсоединить  
отрицательный разъем аккумулятора и осуществить все подключения перед установкой  
устройства. Если Вы не знаете точно, как следует устанавливать это устройство,  
обратитесь к квалифицированному специалисту.  
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and  
make all electrical connections before installing the unit. If you are not sure how to install this unit  
correctly, have it installed by a qualified technician.  
Note:  
Примечание:  
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your  
vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC  
IN-CAR ENTERTAINMENT dealers.  
Это устройство разработано для эксплуатации на 12 В постоянного напряжения с  
минусом на массе. Если Ваш автомобиль не имеет этой системы, требуется инвертор  
напряжения, который может быть приобретен у дилера JVC IN-CAR ENTERTAINMENT.  
• Заменяйте предохранитель другим предохранителем указанного класса. Если  
предохранитель сгорает слишком часто, обратитесь к дилеру JVC IN-CAR  
ENTERTAINMENT.  
• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC  
IN-CAR ENTERTAINMENT dealer.  
• If noise is a problem...  
This unit incorporates a noise filter in the power circuit. However, with some vehicles, clicking or  
other unwanted noise may occur. If this happens, connect the unit’s rear ground terminal (see  
connection diagram) to the car’s chassis using shorter and thicker cords, such as copper  
braiding or gauge wire. If noise still persists, consult your JVC IN-CAR ENTERTAINMENT  
dealer.  
• При появлении сильных помех...  
Это устройство оснащено фильтром помех в цепи питания. Однако в некоторых случаях  
возможно появление щелчков и других нежелательных помех. В этом случае подключите  
задний разъем заземления этого устройства (см. схему подключения ниже) к шасси  
автомобиля при помощи более коротких и толстых проводов. Если помехи не исчезают,  
обратитесь к дилеру JVC IN-CAR ENTERTAINMENT.  
• Максимальная входная мощность громкоговорителей должна быть больше 45 Вт сзади и  
45 Вт впереди при полном сопротивлении от 4 до 8 .  
Нe забудьте заземлить устройство на шасси автомобиля.  
• Радиатор во время использования сильно нагревается. Старайтесь его не трогать во  
время удаления устройства.  
• Maximum input of the speakers should be more than 45 W at the rear and 45 W at the front, with  
an impedance of 4 to 8 .  
Be sure to ground this unit to the car’s chassis.  
• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.  
Heat sink  
Радиатор  
2
ENGLISH  
РУССКИЙ  
For some VW/Audi or Opel (Vauxhall) automobile  
If your car is equipped with the ISO connector  
Если Ваш автомобиль оборудован разъемами ISO  
Для некоторых автомобилей VW/Audi или Opel (Vauxhall)  
You may need to modify the wiring of the supplied power cord as illustrated.  
Contact your authorized car dealer before installing this unit.  
Connect the ISO connectors as illustrated.  
• Подключите разъемы ISO, как показано на иллюстрации.  
Вам может потребоваться изменение соединений полученного в комплекте кабеля питания, как показано на  
иллюстрации.  
• Перед установкой устройства обратитесь к Вашему официальному дилеру автомобиля.  
From the car body  
На корпусе автомобиля  
Yellow/Желтый  
Yellow/Желтый  
A
C
E
B
D
F
Original wiring  
Исходное  
соединение  
Red/  
Красный  
Red/  
Красный  
ISO connector  
Разъем ISO  
G
H
Red/Красный  
Yellow/Желтый  
Yellow/Желтый  
J
L
I
Use modified wiring 2 if the unit does not  
turn on.  
Если устройство не включается,  
модифи-цируйте кабель по схеме 2.  
Modified wiring 1  
Модифицированное  
соединение 1  
ISO connector of the supplied power cord  
Разъем ISO, полученный в комплекте  
кабеля питания  
K
M
O
N
P
Red/  
Красный  
Red/  
Красный  
Red/Красный  
Yellow/Желтый  
Yellow/Желтый  
View from the lead side  
Вид со стороны контактов  
Modified wiring 2  
Модифицированное  
соединение 2  
Red/  
Красный  
Red/  
Red/Красный  
Красный  
Connections without using the ISO connectors / Подключение без использования разъемов ISO  
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause  
serious damage to this unit.  
Перед началом подключений: Тщательно проверьте проводку в автомобиле.  
Неправильное подключение может привести к серьезному повреждению устройства.  
The leads of the power cord and those of the connector from the car body may be different in color. Жилы силового кабеля и жилы соединителя от кузова автомобиля могут быть разного цвета.  
1 Cut the ISO connector.  
1 Отрежьте разъем ISO.  
2 Connect the colored leads of the power cord to the car battery, speakers and power aerial (if  
2 Подключите цветные провода кабеля питания к аккумулятору, громкоговорителям и  
any) in the following sequence.  
автономной антенне (если есть) в следующем порядке:  
1 Black: ground  
1 Черный: земля  
2 Yellow: to car battery (constant 12 V)  
3 Red: to an accessory terminal  
2 Желтый: к аккумулятору (постоянный 12 В)  
3 Красный: к вспомогательному разъему  
4 Blue with white stripe (Remote out): to remote lead of other equipment or power aerial if  
4 Синий с белой полосой (удаленный выход): к удаленному проводу другого  
any (200 mA max.)  
оборудования или антенны (макс. 200 мА).  
5 Orange with white stripe: to illumination or small lamp terminal  
5 Оранжевый с белой полосой: к подсветке или ламповому терминалу  
6 Others: to speakers  
6 Другие: к громкоговорителям  
3 Connect the aerial cord.  
4 Finally connect the wiring harness to the unit.  
3 Подключите кабель антенны.  
4 В последнюю очередь подключите электропроводку к устройству.  
When connecting a CD changer, we recommend to use one of the CH-X series CD changers  
(except for JVC MP3 compatible CD changer.)  
If your CD changer is one of the KD-MK series, you need an optional cord (KS-U15K).  
You can also connect an external component such as a portable MD player by connecting the Line  
Input Adapter KS-U57 (not supplied). (See diagram .)  
• При подключении устройства автоматической смены компакт-дисков рекомендуется  
использовать одно из устройств серии CH-X (кроме устройства автоматической смены  
компакт-дисков компании JVC, совместимого с MP3). Если устройство автоматической  
смены компакт-дисков относится к серии KD-MK, необходим дополнительный кабель  
(KS-U15K).  
1
JVC CD changer or another external  
component  
Устройство автоматической смены  
компакт-дисков JVC или другое  
внешнее устройство  
Cut the ISO connector  
Отрежьте разъем ISO  
• Можно также подключить внешнее устройство, например, портативный MD-проигрыватель,  
используя коммуникационный адаптер KS-U57 (не входит в комплект поставки). (См. схему  
.)  
Line out (see diagram  
Линейный выход (см.  
)
F-OUT R-OUT  
L
L
Rear ground terminal  
Задний разъем заземления  
схему  
)
R
R
15 A fuse  
Предохранитель 15A  
3
2
To the car aerial  
К автомобильной антенне  
Not included with this unit.  
Не входит в комплект.  
Ignition switch  
Переключатель  
зажигания  
*
JVC CD changer jack  
Разъем устройства  
автоматической смены  
*
Black  
Черный  
P
To metallic body or chassis of the car  
К металлическому корпусу или шасси автомобиля  
компакт-дисков компании JVC  
*
1
4
Yellow*1  
To a live terminal in the fuse block connecting to the car  
battery (bypassing the ignition switch)  
К разъему фазы в блоке предохранителя (минуя блок  
зажигания)  
Желтый*1  
L
2
Red  
Красный  
Fuse block  
Блок  
предохранителя  
O
To an accessory terminal in the fuse block  
К вспомогательному разъему в блоке предохранителя  
To other equipment (see diagram  
К другому оборудованию (см. схему  
)
)
3
Blue with white stripe  
Синий с белой полосой  
M 4  
To remote lead of other equipment or power aerial if any  
К удаленному проводу другого оборудования или антенны  
*1: Before checking the operation of this unit prior  
to installation, this lead must be connected,  
otherwise power cannot be turned on.  
*1: Перед проверкой работы устройства  
подключите этот провод, иначе питание  
не включится.  
Orange with white stripe  
Оранжевый с белой полосой  
N
To illumination or small lamp terminal  
К питанию антенны, если есть  
5
(ILLUMINATION)  
6
Gray with black  
stripe  
Серый с черной  
полосой  
D
C
H
G
B
A
F
E
White with black  
stripe  
Белый с черной  
полосой  
White  
Белый  
Gray  
Серый  
Green with black  
stripe  
Зеленый с  
Green  
Зеленый  
Purple with black  
stripe  
Пурпурный с черной  
полосой  
Purple  
Пурпурный  
черной полосой  
Left speaker (front)  
Левый громкоговоритель  
(передний)  
Right speaker (front)  
Правый громкоговоритель  
(передний)  
Left speaker (rear)  
Левый громкоговоритель  
(задний)  
Right speaker (rear)  
Правый громкоговоритель  
(задний)  
3
PRECAUTIONS on power supply and speaker connections:  
ПРЕДОСТЕРЕЖЕНИЯ по питанию и подключению громкоговорителей:  
DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the  
НЕ подключайте провода громкоговорителей к аккумулятору автомобиля, иначе  
устройство будет повреждено.  
unit will be seriously damaged.  
Connect the black lead (ground), yellow lead (to car battery, constant 12 V), and red lead (to an • Правильно подключите черный провод (земля), желтый провод (в аккумулятор,  
accessory terminal) correctly.  
BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker  
wiring in your car.  
If the speaker wiring in your car is as illustrated in Fig. 1 and Fig. 2 below, DO NOT  
connect the unit using that original speaker wiring. If you do, the unit will be seriously  
damaged.  
Redo the speaker wiring so that you can connect the unit to the speakers as illustrated in Fig. 3.  
If the speaker wiring in your car is as illustrated in Fig. 3, you can connect the unit using  
the original speaker wiring in your car.  
постоянный ток 12 В) и красный провод (в вспомогательный разъем).  
• ПЕРЕД подключением проводов громкоговорителей к кабелю питания  
громкоговорителя проверьте схему соединений громкоговорителей в Вашем  
автомобиле.  
Если проводка громкоговорителей в Вашем автомобиле такая, как показано на  
приводимых ниже Fig. 1 и Fig. 2, НЕ подключайте устройство с помощью  
первоначальной проводки громкоговорителей. Если Вы это сделаете, устройство  
будет серьезно повреждено.  
Переделайте проводку громкоговорителей так, чтобы Вы могли подключить  
устройство к громкоговорителям, как это показано на рис. 3.  
Если проводка громкоговорителей в Вашем автомобиле такая, как показано на  
Fig. 3, Вы можете подключить устройство с помощью первоначальной проводки  
громкоговорителей в Вашем автомобиле.  
– Если Вы не знаете соединение громкоговорителей в Вашем автомобиле, обратитесь к  
Вашему автомобильному дилеру.  
If you are not sure of the speaker wiring of your car, consult your car dealer.  
+
+
-
+
+
+
+
L
-
L
L
-
-
-
-
+
+
-
+
+
+
-
+
-
R
-
R
R
-
-
Fig. 1  
Fig. 2  
Fig. 3  
Connecting the leads / Подключение контактов  
Twist the core wires when connecting.  
Закрутите концы проводов при соединении.  
CAUTION / ПРЕДОСТЕРЕЖЕНИЕ:  
To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.  
Для предотвращения короткого замыкания заклейте НЕИСПОЛЬЗУЕМЫЕ концы  
изолирующей лентой.  
Solder the core wires to connect them securely.  
Спаяйте провода для надежного соединения.  
Connections Adding Other Equipment / Подключение других устройств  
Amplifier / Усилитель  
Вы можете подключить усилитель и другое оборудование для модернизации  
стереосистемы в Вашем автомобиле.  
You can connect an amplifier and other equipment to upgrade your car stereo system.  
Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so  
that it can be controlled through this unit.  
• Подсоедините провод внешнего устройства (синий с белой полосой) к проводу  
внешнего устройства другого оборудования так, чтобы им можно было управлять с  
этого устройства.  
For amplifier only:  
Connect this units line-out terminals to the amplifiers line-in terminals.  
Disconnect the speakers from this unit, connect them to the amplifier. Leave the  
speaker leads of this unit unused.  
Только для усилителя:  
– Подключите выходные клеммы данного устройства к входным клеммам усилителя.  
Отсоедините громкоговорители от данного устройства, подключите их к  
усилителю. Оставьте провода громкоговорителей данного устройства  
неиспользованными.  
Rear speakers  
Задние  
громкоговорители  
Signal cord (not supplied with this unit)  
Кабель сигнала (не входит в комплект)  
Y-connector (not supplied with this unit)  
Разъем Y (не входит в комплект)  
INPUT  
L
JVC Amplifier  
JVC Усилитель  
L
R
R
Remote lead  
Провод внешнего устройства  
*2  
To power aerial if any  
К питанию антенны, если есть  
F-OUT R-OUT  
Blue with white stripe  
Синий с белой полосой  
L
L
L
R
R
R
A
C
E
B
D
F
* Cut the rear speaker leads of the cars ISO connector and connect them to the amplifier.  
* Отрежьте провода задних громкоговорителей разъема ISO и подсоедините их к  
усилителю.  
*
*
*
*
KW-XC939  
G
H
INPUT  
Front speakers  
Передние  
громкоговорители  
L
L
JVC Amplifier  
JVC Усилитель  
R
R
*2 Firmly attach the ground wire to the metallic body or to the  
Rear speakers  
chassis of the carto the place not coated with paint (if coated  
with paint, remove the paint before attaching the wire). Failure  
to do so may cause damage to the unit.  
Задние  
громкоговорители  
*2  
*2 Плотно прикрепите заземляющий провод к  
You can connect another power amplifier for front  
speakers.  
Вы можете подключить еще один усилитель мощности  
для передних динамиков.  
металлическому кузову или шасси автомобиля—в месте,  
не покрытом краской (если оно покрыто краской, удалите  
краску перед тем, как прикреплять провод).  
Невыполнение этого требования может привести к  
повреждению данного устройства.  
Front speakers  
Передние  
громкоговорители  
CD changer or another external component / Устройство автоматической смены компакт-дисков или другое внешнее устройство  
Cord (supplied with the CD changer)  
Шнур (поставляется с устройством  
автоматической смены компакт-дисков)  
Line Input Adapter KS-U57 (not supplied with this unit)  
Коммуникационный адаптер KS-U57 (не входит в комплект)  
Signal cord (not supplied with this unit)  
Кабель сигнала (не входит в комплект)  
L
L
L
L
R
R
R
R
or  
или  
JVC CD changer  
Проигрыватель нескольких  
компакт-дисков JVC  
External component  
Внешнее устройство  
F-OUT R-OUT  
L
L
R
R
KW-XC939  
4

RCA Small Wonder EZ3000 Series User Manual
Phoenix Gold Car Amplifier R10001 User Manual
Panasonic PV D427 User Manual
Olympus 227475 User Manual
Nikon Camera Accessories WR A10 User Manual
Midland Radio XTC Wearable Video Camera XTC300 User Manual
KitchenAid KFPW760 User Manual
Kenwood KFC W210 User Manual
Kenwood Car Stereo System KDC W4141 User Manual
JVC GZ MG330U User Manual