JVC GR SXM250 User Manual
INSTRUCTIONS  
ENGLISH  
LYT1078-001A  
COMPACT VHS CAMCORDER  
GR-SXM250  
For Customer Use:  
Enter below the Model No. and Serial No. which is  
located on the bottom of the camcorder. Retain this  
information for future reference.  
Printed in Malaysia  
1102-DY-YL-PJ  
Model No.  
Serial No.  
US  
COPYRIGHT© 2002 VICTOR COMPANY OF JAPAN, LTD  
Dear Customer,  
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read  
“PRECAUTIONS” (੬ pg. 3, 4) to ensure safe use of this product.  
AUTOMATIC DEMONSTRATION  
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”  
(factory-preset).  
•Available when the Power Switch @ is set to “ ” or “ ” while pressing down the Lock Button !  
located on the switch.  
•Performing any operation during the demonstration stops the demonstration temporarily. If no operation  
is performed for more than 1 minute after that, the demonstration will resume.  
•“DEMO MODE” remains “ON” even if the camcorder power is turned off.  
•To cancel Automatic Demonstration, set the Power Switch @ to “ ” and press the MENU Wheel 1 in  
while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not  
have to go through the main Menu Screen). Rotate the MENU Wheel 1 to select “OFF” and press it.  
NOTES:  
•When a tape whose Erase Protection tab is in the position that allows recording is loaded in the  
camcorder, demonstration is not available.  
•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration  
activated on the LCD monitor or viewfinder.  
1
PRECAUTIONS  
SAFETY PRECAUTIONS  
CAUTIONS  
CAUTION  
•This camcorder is designed to be used with  
NTSC-type color television signals. It cannot be  
used for playback with a television of a different  
standard. However, live recording and LCD  
monitor/viewfinder playback are possible any-  
where.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
•Use the JVC BN-V11U/V12U/V20U/V400U  
battery packs and, to recharge them or to supply  
power to the camcorder from an AC outlet, use  
the provided multi-voltage AC Adapter.  
(An appropriate conversion adapter may be  
necessary to accommodate different designs of  
AC outlets in different countries.)  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated "dangerous voltage" within the  
product's enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
NOTES:  
•The rating plate (serial number plate) and safety  
caution are on the bottom and/or the back of the  
main unit.  
•The rating information and safety caution of the  
AC Adapter are on its upper and lower sides.  
WARNING:  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPARATUS TO  
RAIN OR MOISTURE.  
ATTENTION:  
The product that you have purchased is powered  
by a rechargeable battery. The battery is recycla-  
ble. At the end of its useful life, under various state  
and local laws, it may be illegal to dispose of this  
battery into the municipal waste stream. Check  
with your local solid waste officials for details in  
your area for recycling options or proper disposal.  
This product has a fluorescent lamp that  
contains a small amount of mercury. Disposal of  
these materials may be regulated in your  
community due to environmental considerations.  
For disposal or recycling information please  
contact your local authorities, or the Electronics  
Industries Alliance:  
<http://www.eiae.org>  
Cassettes marked  
and  
can be used with this camcorder.  
3
The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates JVC  
is voluntarily participating in an industry program to collect and recycle these batteries at the end of  
their useful life, when taken out of service in the United States. The RBRC® program provides a  
convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream,  
which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery  
recycling and disposal bans/restrictions in your area. JVC’s involvement in this program is part of our  
commitment to preserving our environment and conserving our natural resources.  
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all  
sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear).  
Do not block the ventilation holes.  
(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)  
No naked flame sources, such as lighted candles, should be placed on the apparatus.  
When discarding batteries, environmental problems must be considered and the local rules or laws  
governing the disposal of these batteries must be followed strictly.  
The apparatus shall not be exposed to dripping or splashing.  
Do not use this equipment in a bathroom or places with water.  
Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower  
vases, potted plants, cups etc.) on top of this unit.  
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)  
IMPORTANT SAFETY INSTRUCTIONS  
(1) Read these instructions.  
(2) Keep these instructions.  
(3) Heed all warnings.  
(10) Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufac-  
turer, or sold with the  
apparatus. When a cart is  
used, use caution when  
moving the cart/apparatus combination to  
avoid injury from tip-over.  
(4) Follow all instructions.  
(5) Do not use this apparatus near water.  
(6) Clean only with dry cloth.  
(11) Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
(7) Do not block any ventilation openings. Install  
in accordance with the  
manufacturer’s instructions.  
(12) Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or has  
been dropped.  
(8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
(9) Only use attachments/accessories specified  
by the manufacturer.  
4
INDEX  
A
P
AC Adapter.................................................................pg. 6  
Animation Recording................................................pg. 21  
Auto Date Record ....................................................pg. 21  
Auto Focus ...............................................................pg. 12  
Auto Shut Off ........................................................... pg. 11  
Picture Stabilizer ......................................................pg. 18  
Playback .................................................................. pg. 11  
Program AE with Special Effects .............................pg. 23  
Provided Accessories................................................ pg. 2  
Q
B
Quick Review ...........................................................pg. 13  
Backlight Compensation ..........................................pg. 12  
Battery Pack .........................................................pg. 6, 26  
Blue Filter Effect ...................................................... pg. 24  
Brighten The Image .................................................pg. 18  
Brighten The LCD Monitor ................................. pg. 11, 22  
R
Recording, Advanced Features..........................pg. 23, 24  
Recording, Start/Stop............................................... pg. 11  
Recording Format (S-VHS/S-VHS ET) ....................pg. 20  
Recording Mode .......................................................pg. 20  
Record-Standby ....................................................... pg. 11  
Red Filter Effect .......................................................pg. 24  
Retake......................................................................pg. 13  
Rewind The Tape ..................................................... pg. 11  
C
Cassette Adapter .....................................................pg. 16  
Charge Marker ...........................................................pg. 6  
Charging The Battery Pack ........................................pg. 6  
Clean The Camcorder ..............................................pg. 27  
Connection To a VCR/TV .........................................pg. 15  
Counter Memory ......................................................pg. 14  
S
Sepia Mode ..............................................................pg. 24  
Shoulder Strap Attachment ........................................pg. 8  
Solarization Effect ....................................................pg. 24  
Specifications ...........................................................pg. 28  
Sports Mode .............................................................pg. 23  
Still Playback ............................................................ pg. 11  
Stretch Effect ...........................................................pg. 24  
Super LoLux (S.LX) .................................................pg. 20  
Super VHS Expansion Technology ..........................pg. 20  
D
Darken The Image ...................................................pg. 18  
Darken The LCD Monitor ................................... pg. 11, 22  
Date/Time Display ....................................................pg. 21  
Date/Time Settings.....................................................pg. 7  
Demonstration Mode............................................pg. 1, 22  
Digital Effects ...........................................................pg. 24  
Digital Zoom .............................................................pg. 20  
T
Diopter Adjustment.....................................................pg. 8  
Tape Counter ...........................................................pg. 14  
Tape Dubbing ...........................................................pg. 15  
Tape Length Setting .................................................pg. 21  
Tele Macro ...............................................................pg. 21  
Time Base Corrector ............................................... pg. 14  
Time-Lapse Shooting ...............................................pg. 21  
Tracking ...................................................................pg. 14  
Tripod Mounting .........................................................pg. 8  
Twilight Mode ...........................................................pg. 23  
E
Electronic Fog Filter Mode .......................................pg. 23  
Erase Protection ........................................................pg. 8  
Exposure Control .....................................................pg. 18  
F
Fade-In/Out ..............................................................pg. 23  
Fast-Forward Tape ................................................... pg. 11  
5-Second Recording Mode ......................................pg. 12  
U
G
Unload A Tape ............................................................pg. 8  
Grip Adjustment .........................................................pg. 8  
V
H
Video Light ...............................................................pg. 13  
Viewfinder Adjustment ...............................................pg. 8  
High Speed Shutter Mode........................................pg. 23  
I
W
Instant Titles .............................................................pg. 19  
White Balance Adjustment .......................................pg. 19  
Wide Mode ...............................................................pg. 20  
Wipe-In/Out ..............................................................pg. 23  
L
LCD Monitor/Viewfinder, Indications ..............pg. 9, 10, 17  
Load A Tape ...............................................................pg. 8  
Z
Zooming ...................................................................pg. 13  
M
Manual Focus ..........................................................pg. 12  
Menu Screen ....................................................pg. 20 – 22  
Monotone Effect .......................................................pg. 24  
Mosaic Effect ...........................................................pg. 24  
N
ND Effect Mode ........................................................pg. 23  
Nega/Posi Mode ......................................................pg. 24  
5
USING THE BATTERY PACK  
GETTING STARTED  
Perform step 1) of “CHARGING THE BATTERY  
Hook on.  
PACK”.  
Approximate recording time (unit: min.)  
Battery pack  
Viewfinder on  
LCD monitor on  
BN-V11U  
80  
(45)  
75  
(40)  
Push in.  
BN-V12U  
(optional)  
80  
(45)  
75  
(40)  
BN-V20U  
(optional)  
135  
(75)  
120  
(70)  
BATTERY RELEASE Switch  
Battery pack  
Power Switch  
BN-V400U  
(optional)  
315  
(165)  
285  
(180)  
(
):when the video light is on  
USING AC POWER  
Connect theACAdapter to the camcorder (੬ step  
2) and 3) of “CHARGING THE BATTERY PACK”).  
To DC IN  
connector  
•The provided AC Adapter features automatic  
voltage selection in the AC range from 110 V to  
240 V.  
AC Adapter  
ATTENTION  
To AC outlet  
Before detaching the power source, make sure that  
the camcorder’s power is turned off. Failure to do  
so can result in a camcorder malfunction.  
CHARGING THE BATTERY PACK  
1) Hook the end of the battery pack to the  
camcorder and push the battery in until it locks  
in place.  
REFRESH:  
Be sure to fully discharge a battery pack before  
recharging, otherwise the battery performance will  
be reduced.  
•If the battery pack is attached in the wrong  
position, a malfunction may occur.  
2) Set the Power Switch @ to “OFF” while pressing  
down the Lock Button ! located on the switch.  
Connect the AC Adapter to the DC IN connector  
9.  
3) Plug the AC Adapter into an AC outlet. The  
CHARGE lamp ) blinks to indicate charging  
has started.  
4) When the CHARGE lamp ) stops blinking but  
stays lit, charging is finished. Unplug the AC  
Adapter from the AC outlet. Disconnect the AC  
Adapter from the camcorder.  
1) Perform steps 1) through 3) of “CHARGING  
THE BATTERY PACK”.  
2) Press REFRESH q for over 2 seconds. The  
POWER lamp $ blinks to indicate discharging  
has started.  
3) When discharging is finished, charging auto-  
matically starts and the CHARGE lamp )  
blinks.  
Charge marker helps you remember  
whether the battery pack has been  
charged or not. Two colours are provided  
(red and black)—you choose which one  
means charged and which means  
discharged.  
To Detach The Battery Pack . . .  
... slide BATTERY RELEASE 8 and pull out the  
battery pack.  
Battery pack  
BN-V11U  
Charging time  
approx. 1 hr. 40 min.  
approx. 1 hr. 40 min.  
approx. 2 hrs. 40 min.  
approx. 5 hrs. 10 min.  
BN-V12U (optional)  
BN-V20U (optional)  
BN-V400U (optional)  
Charging times are for a fully discharged battery pack.  
6
STORE BATTERY:  
Date/Time Settings  
Be sure to fully discharge a battery pack by  
performing the following steps before storing it for  
a long period of time, otherwise the battery  
performance will be reduced.  
1) Set the Power Switch @ to “ ” while pressing  
down the Lock Button ! located on the switch.  
2) Press the MENU Wheel 1 in. The Menu Screen  
appears.  
1) Attach the battery to the camcorder with no  
cassette inserted.  
3) Rotate the MENU Wheel 1 to select  
“
4TO SYSTEM MENU” and press it to display  
2) Set the Power Switch @ to “ ” or “ ” while  
pressing down the Lock Button ! located on the  
switch.  
SYSTEM MENU. Rotate the MENU Wheel 1 to  
select “4NEXT” and press it to display the next  
page.  
4) Rotate the MENU Wheel 1 to select “DATE/  
TIME” and press it. The DATE/TIME Menu  
appears.  
5) To set “YEAR”, “MONTH”, “DAY” or “TIME”  
(hour/minute), rotate the MENU Wheel 1 to  
select the desired item, and press it. When the  
setting begins blinking, rotate the MENU Wheel  
1 until the correct setting appears and then  
press it. The setting stops blinking.  
6) When none of these settings (“YEAR”,  
“MONTH”, “DAY”, “TIME”) blinks, rotate the  
MENU Wheel 1 to select “4EXIT”, and press it.  
The Menu Screen reappears with the highlight  
bar on “4RETURN”.  
•During charging or discharging, the camcorder  
cannot be operated.  
•Charging and discharging is not possible if the  
wrong type of battery is used.  
•When charging the battery pack for the first time  
or after a long storage period, the CHARGE lamp  
) may not light. Remove the battery pack from  
the camcorder, then try charging again.  
•If a fully-charged battery’s operation time remains  
extremely short, the battery is worn out. Please  
purchase a new one.  
•Perform charging where the temperature is  
between 10°C and 35°C (50°F and 95°F). 20°C to  
25°C (68°F to 77°F) is the ideal temperature range  
for charging. If the environment is too cold,  
charging may be incomplete.  
•Charging time varies according to the ambient  
temperature and the status of the battery pack.  
•Since the AC Adapter processes electricity  
internally, it becomes warm during use. Be sure to  
use it only in well-ventilated areas.  
7) Press the MENU Wheel 1 in to close the Menu  
Screen.  
•To display the date and time in the camcorder’s  
display and on a connected TV, see DATE/TIME  
DISP. (੬ pg. 21) in SYSTEM MENU.  
•The date/time cannot be stored in memory if the  
built-in clock battery runs out. Consult an author-  
ised JVC dealer for replacement, or set the date/  
time as necessary before you start shooting.  
•The following operation stops charging or  
discharging:  
•Set the Power Switch @ to “PLAY”, “ ” or “ ”.  
•Disconnect the AC Adapter from the camcorder.  
•Unplug the AC Adapter’s power cord from the  
AC outlet.  
•Detach the battery from the camcorder.  
•Using the optional AA-V15 AC Power Adapter/  
Charger, you can charge the BN-V11U/V12U/  
V20U/V400U battery pack without the camcorder.  
However, it cannot be used as an AC adapter.  
•To avoid interference with reception, do not use  
the AC Adapter near a radio.  
•Recording time is reduced significantly when  
Zoom or Record-Standby mode is engaged  
repeatedly or the LCD monitor is used repeatedly.  
•Before extended use, it is recommended that you  
prepare enough battery packs to cover 3 times the  
planned shooting time.  
1
@
!
12-hour  
indication with  
AM to PM  
D A T E T I M E  
Y E A R  
MO N T H  
D A Y  
2 0 0 2  
J U N  
2 8  
T I M E  
PM 8 : 2 0  
.
E X I T  
7
Tripod Mounting  
Align the screw and camera direction stud on the  
tripod with the tripod mounting socket Q. Then  
tighten the screw.  
Grip Adjustment  
1) Separate the Velcro strip.  
2) Pass your right hand through the loop and grasp  
the grip.  
3) Adjust so that your thumb and fingers can easily  
operate the Recording Start/Stop Button 0 and  
Power Zoom Lever 3. Refasten the Velcro strip.  
CAUTION  
When using a tripod, be  
sure to open and extend  
its legs fully to stabilize  
the camcorder. To  
prevent damage to the  
unit caused by falling  
over, do not use a  
small-sized tripod.  
3
0
Q
Velcro  
Strip  
Loading/Unloading A Cassette  
Viewfinder Adjustment  
1) Open the LCD monitor fully and keep it aligned  
vertically with the camera (do not tilt it at an  
angle). Slide EJECT ( until the cassette holder  
opens. Do not use force to open.  
1) Set the Power Switch @ to “ ” or “ ” while  
pressing down the Lock Button ! located on the  
switch.  
2) Turn the Dioptre Adjustment Control i until the  
indications in the viewfinder are clearly focused.  
2) Insert or remove a cassette. When inserting,  
make sure the label is facing outward.  
appears when a cassette is loaded.  
F
i
3) Press the Close button u to close the cassette  
holder until it locks into place. Close the LCD  
monitor.  
•Closing the LCD monitor while the cassette holder  
is still open may cause damage to the LCD  
monitor.  
•Make sure the erase protection tab is in the  
position that allows recording. If not, slide the tab.  
Some cassettes have removable tabs. If the tab  
has been removed, cover the hole with adhesive  
tape.  
@
180°  
!
PAUSE  
•The cassette holder cannot be opened while the  
camcorder is in the record mode or detached from  
the power source.  
Cassette holder  
Shoulder Strap Attachment  
(
Gear  
Thread the strap through the eyelet t, then fold it  
back and thread it through the buckle. Repeat the  
procedure to attach the other end of the strap to  
the other eyelet t, making sure the strap is not  
twisted. Adjust the length.  
Turn to  
take up  
slack.  
Erase Protection tab  
u
t
8
CONTROLS, CONNECTORS AND INDICATORS  
Eyepiece  
Refer to this diagram while reading the instructions.  
1
2
3
4
During  
shooting  
#
$
)
%
q
^ &  
*
(
5
Keep the lens  
cap attached to  
the camcorder.  
6
7
8
w
e
r
Cassette holder  
9
0
!
@
Viewfinder  
t
Turn the gear to  
take up slack.  
90°  
°
180°  
i
Speaker  
y
o
u
t
LCD monitor  
180°  
Erase  
protection tab  
Q
p
Microphone  
Video light  
LCD Monitor/Viewfinder Indications  
During Recording  
During Playback  
W
E R T Y U I  
F G  
H J K L :  
O
–
120M I N  
REC SP  
A
S–ET  
T
30  
S
ET  
SP  
4
–
:
:
TBC  
1
2 3 4 5  
AT  
P
444  
TWI L I GHT  
l
a
d
+
02  
;
S
s
f
S–VHS REC  
MWB  
A
D
PAUSE  
1X  
b
5
M I N  
g
1/2 S  
j
h
CONGRATULATIONS  
25. 12. 02  
11 : 45 : 18  
k
z
a
BRIGHT  
– – – – – – – – – –  
6
+
–
–––––6–––––  
+
VOLUME  
–
੬ pg. 25 for Warning Indications .  
9
W Tape Remaining Time .............................. ੬ pg. 21  
E Recording Mode Indicator ....................... ੬ pg. 20  
R Video Light Indicator ................................ ੬ pg. 13  
T Backlight Compensation Indicator ........... ੬ pg. 12  
Y Recording Format Indicator (S/S-ET) ...... ੬ pg. 20  
U • Digital Effect Indicator ............................ ੬ pg. 24  
• Programme AE Indicator ....................... ੬ pg. 23  
• Fade/Wipe-Standby Indicator ................ ੬ pg. 23  
1 • MENU Wheel [–, +] ................................ ੬ pg. 18  
• BRIGHT Wheel [–, +] ..............................੬ pg. 11  
• Speaker Volume Control [VOL.] .............੬ pg. 11  
• TRACKING Wheel [–, +] ........................ ੬ pg. 14  
2 5-Second Recording Button  
[5 SEC. REC]........................................... ੬ pg. 12  
3 Power Zoom Lever [T/W]......................... ੬ pg. 13  
4 • Manual Focus Button [  
FOCUS]........ ੬ pg. 12  
I Tape Length Indicator .............................. ੬ pg. 21  
O Zoom Indicator Bar .................................. ੬ pg. 13  
Zoom Level Indicator  
• Time Base Corrector Button [TBC] ........ ੬ pg. 14  
5 S-Video Output Connector [S] ................. ੬ pg. 15  
6 Audio Output Connector [A]..................... ੬ pg. 15  
7 Video Output Connector [V]..................... ੬ pg. 15  
8 Battery Release Switch  
[BATTERY RELEASE] ............................... ੬ pg. 6  
9 DC IN Connector ....................................... ੬ pg. 6  
0 Recording Start/Stop Button .....................੬ pg. 11  
! Lock Button...............................................੬ pg. 11  
@ Power Switch [PLAY, OFF, CHARGE,  
Approximate Zoom Ratio  
P Recording Indicator ..................................੬ pg. 11  
a Digital Effect Indicator .............................. ੬ pg. 24  
s Programme AE Indicator ......................... ੬ pg. 23  
d Fade/Wipe-Standby Indicator .................. ੬ pg. 23  
f Picture Stabilizer Indicator ....................... ੬ pg. 18  
g • Interval Time/Recording Time Indicator .... ੬ pg. 21  
• 5 Sec. Rec Mode Indicator .................... ੬ pg. 12  
,
]......................................................੬ pg. 11  
h Bright Level Indicator ..........................੬ pg. 11, 22  
j Instant Title Display ................................. ੬ pg. 19  
k Date/Time Display ................................... ੬ pg. 21  
l Focus Indicator ........................................ ੬ pg. 12  
; Exposure Control Level Counter ............. ੬ pg. 18  
A White Balance Mode Indicator................. ੬ pg. 19  
# Video Light Button [LIGHT]...................... ੬ pg. 13  
$ POWER Lamp ........................................... ੬ pg. 6  
% Digital Effect Button [DIGIFECT] ............. ੬ pg. 24  
^ Programme AE Button [P.AE] .................. ੬ pg. 23  
& Play/Pause Button ....................................੬ pg. 11  
* • Retake Forward Button [RETAKE F] ..... ੬ pg. 13  
• Fast-Forward Button [F] ..........................੬ pg. 11  
S S-VHS/S-VHS ET Recording  
Indicator ................................................... ੬ pg. 20  
( EJECT Switch ............................................ ੬ pg. 8  
) CHARGE Lamp ......................................... ੬ pg. 6  
q REFRESH Button ...................................... ੬ pg. 6  
w • Fade/Wipe Button [FADE/WIPE] ........... ੬ pg. 23  
• Counter Reset/Memory Button  
[COUNTER R/M] ................................... ੬ pg. 14  
D Record-Standby Mode Indicator ...............੬ pg. 11  
F
: Cassette Indicator ............................. ੬ pg. 8  
G TBC Indicator........................................... ੬ pg. 14  
H Recording Format Indicator (S/S-ET) ...... ੬ pg. 20  
J Tape Counter ........................................... ੬ pg. 14  
K Recording Mode Indicator (SP/EP) ......... ੬ pg. 20  
L Tape Running Indicator  
e • Retake Rewind Button [RETAKE R] ...... ੬ pg. 13  
• Quick Review Button [  
R] ................. ੬ pg. 13  
4
: Playback  
• Rewind Button [R] ...................................੬ pg. 11  
r • Stop Button [STOP] ................................੬ pg. 11  
• Backlight Compensation Button  
[BACK LIGHT] ....................................... ੬ pg. 12  
t Shoulder Strap Eyelets .............................. ੬ pg. 8  
y Battery Pack Mount ................................... ੬ pg. 6  
u Close Button .............................................. ੬ pg. 8  
i Dioptre Adjustment Control........................ ੬ pg. 8  
3
2
6
: Fast-Forward/Shuttle Search  
: Rewind/Shuttle Search  
: Pause  
: Tracking Indicator .................................... ੬ pg. 14  
z • BRIGHT: Bright Level Indicator ...............੬ pg. 11  
• VOLUME: Speaker Volume Indicator ......੬ pg. 11  
o Camera Sensor  
Be careful not to cover this area; a sensor  
necessary for shooting is built-in here.  
p Grip Strap .................................................. ੬ pg. 8  
Q Tripod Mounting Socket ............................. ੬ pg. 8  
10  
RECORDING  
PLAYBACK  
Set REC MODE, S-VHS (S-VHS ET), TAPE  
LENGTH and DATE/TIME in SYSTEM MENU.  
(੬ pg. 18 – 22, “MENU SETTINGS”)  
1 Load a tape (੬ pg. 8, “Loading/Unloading A  
Cassette”).  
2 Set the Power Switch @ to “PLAY” while  
pressing down the Lock Button ! located on the  
switch. To start playback, press 4/6 &.  
1 Remove the lens cap. Set the Power Switch @  
to “ ” or “ ” while pressing down the Lock  
Button ! located on the switch.  
Shooting while using the viewfinder: Make sure  
the LCD monitor is closed and locked.  
Shooting while using the LCD monitor: Make  
sure the LCD monitor is fully open.  
The camcorder enters the Record-Standby mode  
and “PAUSE” D is displayed.  
•The viewfinder and LCD monitor cannot be used  
simultaneously on this camcorder. Therefore,  
when opening the LCD monitor and tilting it  
upward to 180°, you cannot view any image in the  
viewfinder, however you can shoot yourself while  
viewing your own image in the LCD monitor.  
To stop playback temporarily (Still Playback), press  
4/6 &. To stop playback, press 5 r. Press  
e to rewind, or * to fast-forward the tape.  
High-speed picture search (Shuttle Search) is  
possible by pressing e or * during  
playback (holding e or * down during  
2
3
2
3
2
3
playback continues search until released). To  
resume normal playback, press 4/6 &.  
For VIDEO RECORDING/VIDEO PLAYBACK  
•The camcorder shuts off automatically after about  
5 minutes in the Record-Standby or Stop mode.  
To turn on again, set the Power Switch @ to  
“OFF”, then to “ ”, “ ” or “PLAY”.  
•When the Power Switch @ is set to “ ”, “ ” or  
“PLAY” and the LCD monitor is opened at an  
angle of 60 degrees or more, the LCD monitor  
switches on and the viewfinder switches off  
automatically to save power.  
2 Press the Recording Start/Stop Button 0.  
P appears while recording is in progress.  
•To stop recording, press the Recording Start/Stop  
Button 0. The camcorder re-enters the Record-  
Standby mode.  
•The playback picture can be viewed in the  
viewfinder (with the LCD monitor shut), on the  
LCD monitor or on a connected TV (੬ pg. 15,  
“Connections To A TV/VCR”).  
To Adjust The Brightness Of The LCD Monitor:  
When the Power Switch @ is set to “ ”, adjust  
“LCD BRIGHT” in SYSTEM MENU (੬ pg. 18, 22).  
•To remove the indications, ੬ pg. 21, DISPLAY or  
OSD OUTPUT in SYSTEM MENU.  
When the Power Switch @ is set to “ ” or  
“OFF”, this adjustment cannot be performed.  
•To control the speaker volume, rotate the MENU  
Wheel 1 towards “+” to turn up, or towards “–” to  
turn down. While shooting, sound is not heard  
from the speaker.  
11  
Backlight Compensation  
BASIC FEATURES  
To quickly increase the brightness of the subject  
relative to the background.  
5Sec. Rec (5-sec. Recording)  
To record a scene for 5 seconds, providing quick  
scene transitions like those seen in TV  
programmes.  
1) Make sure the recording mode is set to “SP”.  
2) During Record–Standby, press 5SEC. REC 2.  
5S g appears and 5Sec. Rec is reserved.  
3) Press the Recording Start/Stop Button 0.  
Recording starts, and after 5-second recording  
is finished, the camcorder re-enters the Record–  
Standby mode automatically.  
1) Press BACK LIGHT r during recording. “ ” is  
displayed and the subject is brightened.  
2) To cancel Backlight Compensation, press BACK  
LIGHT r again. “ ” disappears and the  
brightness returns to the previous level.  
•Backlight Compensation functions in both  
recording modes (“ ” or “ ”).  
•Using BACK LIGHT r may make the subject too  
bright, resulting in a washed out or white image.  
•BACK LIGHT r cannot be used when the  
manual Exposure Control mode (੬ pg. 18) is  
engaged.  
4) To cancel the 5Sec. Rec. function, press 5SEC.  
REC 2 again so that  
•Fade/Wipe (੬ pg. 23) cannot be activated by  
5S g disappears.  
Auto/Manual Focus  
pressing 5SEC. REC 2.  
If correct focus cannot be obtained with Auto  
Focus, use Manual Focus.  
1) Set the Power Switch @ to “ ” while pressing  
down the Lock Button ! located on the switch.  
2) Press  
FOCUS 4. “  
” appears.  
3) To focus on a distant subject, rotate the MENU  
Wheel 1 upward. “ ” appears and blinks.  
To focus on a close subject, rotate the MENU  
Wheel 1 downward. “ ” appears and blinks.  
4) To cancel the Manual Focus, press  
FOCUS  
4. “  
applied.  
” disappears and the Auto Focus is  
•When the focus level cannot be adjusted any  
farther or closer, “ ” or “ ” will blink.  
12  
Video Light  
Zooming  
To brighten the scene when natural lighting is too  
dim.  
To produce the zoom in/out effect. Digital circuitry  
extends the maximum magnification offered by  
optical zoom. This system is called Digital Zoom.  
•Slide the Power Zoom Lever 3 towards “T” to  
zoom in, or “W” to zoom out.  
Pressing “LIGHT”# changes the Video Light mode  
sequentially as shown below.  
OFF (no indication)  
AUTO (  
)
ON (  
)
•The further you slide the Power Zoom Lever 3,  
the quicker the zoom action.  
•Focusing may become unstable during Zooming.  
In this case, set the zoom while in Record–  
Standby, lock the focus by using the manual focus  
(੬ pg. 12, “Auto/Manual Focus”), then zoom in  
or out in Record mode.  
•The zoom level indicator O- moves during  
zoom. Once the zoom level indiator O-  
reaches the top, all magnification from that point  
is through digital processing.  
•When using Digital Zoom, the quality of image  
may suffer. To deactivate Digital Zoom, set  
“D.ZOOM” (੬ pg. 20) to “OFF” in SYSTEM  
MENU.  
OFF : Turns off the light.  
AUTO: Automatically turns on the light when the  
camcorder senses insufficient lighting on  
the subject.  
ON : Always keeps the light on as long as the  
camcorder is turned on.  
• It is recommended to set M.W.B. (੬ pg. 19) to  
in CAMERA MENU when you use the video  
light.  
• Even if the battery indicator (  
) does not blink  
if the battery pack’s charge is low, the camcorder  
may turn off automatically when you turn on the  
video light, or when you start recording with the  
video light turned on.  
• When the Video Light mode is set to “AUTO”:  
•Depending on the lighting conditions, the video  
light may keep turning on and off. Press  
“LIGHT” # repeatedly until “ON” or “OFF” is  
selected as required.  
•While the “Sports” or “High Speed Shutter” mode  
is engaged, the light is likely to stay on. While  
the “Twilight” mode is engaged, the light will not  
activate. (੬ pg. 23, “Programme AE with  
Special Effects”)  
Quick Review  
To check the end of the last recording.  
1) Make sure the camcorder is in the Record–  
Standby mode.  
2) Press  
2
e and release quickly.  
Tape is rewound for approx. 1 second and  
played back automatically, then pauses in  
Record–Standby mode for the next shot.  
•Distortion may occur at the start of playback. This  
is normal.  
Retake  
To re-record certain segments.  
DANGER  
1) Make sure the camcorder is in the Record–  
Standby mode.  
•The video light can become  
extremely hot.  
Do not touch it either while in  
2) Press and hold either RETAKE * or e to reach  
the start point for new recording. Pressing  
3
operation or soon after turning it off,  
otherwise serious injury may result.  
•Do not place the camcorder into the carrying case  
immediately after using the video light, since it  
remains extremely hot for some time.  
•When operating, keep a distance of about 30 cm  
between the video light and people or objects.  
•Do not use near flammable or explosive  
materials.  
* forwards the tape and pressing  
reverses it.  
2
e
3) Press the Recording Start/Stop Button 0 to  
start recording.  
•Noise bars appear and pictures may become  
monochrome or darken during Retake. This is  
normal.  
•It is recommended that you consult your nearest  
JVC dealer for replacing the video light.  
13  
Tracking  
Counter Memory  
Eliminates noise bars that appear on-screen during Makes it easier to locate a specific tape segment.  
playback. To activate Manual Tracking:  
1) Press COUNTER R/M w and hold for more than  
1) Press the TRACKING Wheel 1 for approx.  
2 seconds. “MT” : appears.  
1 second. The counter J resets to “0:00:00”.  
2) Press COUNTER R/M w for less than 1 second.  
“M” appears.  
2) Rotate the TRACKING Wheel 1 so that the  
noise bars disappear.  
3) After recording or playback, press 5 r, then  
•To return to Auto Tracking, press the TRACKING  
Wheel 1 for approx. 2 seconds or set the Power  
Switch @ to “OFF” and then “PLAY” again. “AT”  
: blinks. When Auto Tracking finishes, the  
indication disappears.  
2
e. The tape automatically stops at or close  
to 0:00:00.  
4) Press 4/6 & to start playback.  
•The counter memory functions in the Fast-  
Forward and Rewind modes.  
•When noise bars appear during playback, the  
camcorder enters the Auto Tracking mode and  
“AT” : appears.  
•Manual Tracking may not work with tapes  
recorded on other VCRs or camcorders.  
•To disable the counter memory function, press  
COUNTER R/M w for less than 1 second so that  
“M” disappears.  
TBC (Time Base Corrector)  
Removes jitter from fluctuating video signals to  
deliver a stable picture even with old tapes.  
To activate/release the TBC mode, press TBC 4  
during playback for more than 1 second. When the  
TBC mode is activated, “TBC” G is displayed.  
•The “TBC” indicator G turns green (grey with a  
camcorder equipped with a black/white view-  
finder) while TBC is working, and white while TBC  
is not operative.  
•TBC does not work during Still Playback and  
Shuttle Search (੬ pg. 11).  
•It may take a few seconds before TBC actually  
starts working.  
•The picture may be distorted if the TBC mode is  
activated or deactivated at the edit-in/-out points  
or when normal playback resumes after Still  
Playback or Shuttle Search (੬ pg. 11).  
•If the playback picture is distorted when TBC is  
set to on, turn off TBC.  
14  
Connections To A TV/VCR  
Tape Dubbing  
1) Make sure all units are turned off.  
1) Connect the camcorder and the VCR  
(੬ “Connections To A TV/VCR”). Set the Power  
Switch @ to “PLAY” while pressing down the  
Lock Button ! located on the switch, turn on the  
VCR’s power, and insert the appropriate  
cassettes in the camcorder and the VCR.  
Engage the VCR’s AUX and Record-Pause  
modes.  
2) Connect the camcorder to a TV or VCR using  
optional video and audio cables. If using both  
TV and VCR, connect the VCR output to the TV  
input.  
3) Turn on all units. Set the VCR to its AUX input  
mode, and set the TV to its VIDEO mode.  
•Use the AC Adapter as the power supply.  
•Be sure to adjust the TV sound volume to its  
minimum level to avoid a sudden burst of sound  
when the camcorder is turned on.  
•If you have a TV or speakers that are not  
specially shielded, do not place the speakers  
adjacent to the TV as interference will occur in the  
camcorder playback picture.  
•The S-Video cable connection can improve the  
dubbed picture quality. The S-Video cable is  
optional. Be sure to use the following cable:  
YTU91146A S-Video cable.  
2) Press 4/6 & to find a spot just before the edit-  
in point. Once it is reached, press 4/6 & again.  
3) Press 4/6 & and engage the VCR’s Record  
mode.  
4) Engage the VCR’s Record-Pause mode and  
press 4/6 &.  
•Repeat steps 2) through 4) for additional editing,  
then stop the VCR and camcorder when finished.  
Consult the JVC Service Conter described on the  
sheet included in the package for details on its  
availability. Make sure to connect the end with a  
core filter to the camcorder. The core filter  
reduces interference.  
White to  
To S-Video  
Audio  
Output 5  
Output 6  
Yellow to  
Video  
Output 7  
Connector cover  
S-Video  
cable  
A/V cable  
(optional)  
(optional)  
TV  
White to  
Audio Input  
To S-Video  
Input  
VCR  
Yellow to  
Video Input  
15  
Using The Cassette Adapter  
Use this to play back an S-VHS-C/VHS-C video  
cassette recorded with this camcorder on a S-VHS/  
VHS VCR.  
1) Slide the battery cover up to remove it, install  
one “AA (R6)” size battery, then reattach the  
cover.  
2) Slide the latch to open the compartment door,  
then insert the cassette and close the  
compartment door.  
3) Load the cassette adapter into the VCR and  
play the tape back.  
4) Slide the latch and the compartment door opens  
automatically. This may take around 10 seconds.  
Do not attempt to force the adapter open. Then,  
insert your finger in the hole, and push up and  
remove the cassette.  
•During tape loading and unloading, do not touch  
the reels for safety and tape protection.  
•Tapes recorded in S-VHS or S-VHS ET mode  
cannot be played back on a regular VHS VCR.  
Playback is possible with a VCR equipped with  
the S-VHS function.  
•During special-effect playback (slow motion, still  
frame, etc.), the picture may vibrate or noise bars  
may appear on the screen.  
•To record on a VCR using a compact cassette  
and the adapter, cover the adapter’s recording  
safety hole with adhesive tape.  
Sliding Latch  
Compartment Door  
Recording  
Safety Hole  
Hole  
Reels  
Battery Cover  
16  
INSTRUCTIONS  
Eyepiece  
Refer to this diagram while reading the instructions.  
1
2
3
4
During  
shooting  
#
$
%
^ &  
*
(
5
Keep the lens  
cap attached to  
the camcorder.  
6
7
8
)
q
w
e
r
Cassette holder  
9
0
!
@
Viewfinder  
t
Turn the gear to  
take up slack.  
90°  
°
180°  
i
Speaker  
y
o
u
t
LCD monitor  
180°  
Erase  
protection tab  
Q
p
Microphone  
Video light  
LCD Monitor/Viewfinder Indications  
During Recording  
During Playback  
H J K L :  
W
E R T Y U I  
F G  
O
–
120M I N  
REC SP  
A
S–ET  
T
30  
S
ET  
SP  
4
–
:
:
TBC  
1
2 3 4 5  
AT  
P
444  
TWI L I GHT  
l
a
d
+
02  
;
S
s
f
S–VHS REC  
MWB  
A
D
PAUSE  
1X  
b
5
M I N  
g
1/2 S  
j
h
CONGRATULATIONS  
25. 12. 02  
11 : 45 : 18  
k
z
a
BRIGHT  
– – – – – – – – – –  
6
+
–
–––––6–––––  
+
VOLUME  
–
੬ pg. 25 for Warning Indications .  
17  
CAMERA MENU  
EXPOSURE  
MENU SETTINGS  
1 Set the Power Switch @ to “ ” while pressing  
Manual exposure adjustment is recommended in  
the following situations:  
•When shooting using reverse lighting or when the  
background is too bright.  
•When shooting on a reflective natural background  
such as at the beach or when skiing.  
•When the background is overly dark or the  
subject light.  
down the Lock Button ! located on the switch.  
2 Press the MENU Wheel 1 in. The Menu  
Screen appears. Rotate the MENU Wheel 1 to  
select the desired function.  
•To go from CAMERA MENU to SYSTEM MENU,  
rotate the MENU Wheel 1 to select “4TO  
SYSTEM MENU” and press it. SYSTEM MENU is  
composed of 2 pages. To go to the next page,  
rotate the MENU Wheel 1 to select “4NEXT”  
and press it.  
1) Rotate the MENU Wheel 1 to select  
“MANUAL”, then press it,  
2) To brighten the image, rotate the MENU Wheel  
1 downward.  
•To return to CAMERA MENU from page 2 of  
SYSTEM MENU, rotate the MENU Wheel 1 to  
select “4TO CAMERA MENU” and press it.  
To darken the image, rotate the MENU Wheel  
1 upward.  
The exposure control level increases /  
decreases (maximum ±06).  
C AM E R A M E N U  
T O S Y S T E M M E N U  
.
E X P O S U R E  
S T A B I L I Z E R  
M . W . B .  
T I T L E  
T I T L E S E T U P  
A U T O  
O N  
A U T O  
H A P .  
STABILIZER  
B
The Picture Stabilizer compensates for unstable  
images caused by camera-shake, particularly at  
high magnification.  
.
.
R E T U R N  
ON : The Picture Stabilizer is activated.  
f appears.  
OFF : The Picture Stabilizer is disactivated.  
f disappears.  
S Y S T E M M E N U  
N E X T  
R E C MO D E  
D . Z OOM  
S . L X  
S P  
•Accurate stabilization may not be possible in  
certain conditions including excessive hand  
shake.  
5 0 x  
N O RMA L  
O F F  
O N  
W I D E  
–
S
V H S  
T A P E L E N G T H T 3 0  
•
f appears blinking if the Stabilizer cannot be  
used.  
D I S P L A Y  
D A T E T I M E D I S P .  
F U L L  
.
R E T U R N  
3 Press the MENU Wheel 1 in to display the  
Setting Menu and rotate it to select the desired  
setting.  
4 Press the MENU Wheel 1 in. The Menu  
Screen reappears with the highlight bar on  
“
4RETURN”. Press the MENU Wheel 1 in. The  
normal screen reappears.  
18  
M.W.B.  
TITLE  
If the white balance is correct, all other colours will  
be accurately reproduced.  
Allows you to superimpose one of eight preset  
titles.  
•j shows the selected title which remains until  
OFF is selected.  
AUTO  
: White balance is adjusted  
automatically.  
FINE  
CLOUD  
: Outdoors on a sunny day.  
: Outdoors on a cloudy day.  
TITLE SETUP  
Adjust the settings for TITLE.  
HALOGEN : A video light or similar type of  
SIZE  
: When “LARGE” is selected, the title  
is twice enlarged vertically more  
than selected “NORMAL”.  
Even if “LARGE” is selected,  
“NORMAL” is automatically  
changed when you select “WIDE”  
mode (੬ pg. 20, “SYSTEM  
MENU”).  
lighting is used.  
MWB: White balance is set manually. Hold a sheet  
of plain white paper in front of the subject. Adjust  
zoom or position yourself so that the white paper  
fills the screen. If it is difficult to focus on the white  
paper, adjust focus manually (੬ pg. 12, “Auto/  
Manual Focus”). Press the MENU Wheel 1 in until  
“MWB” begins blinking. When the setting is  
completed, “MWB” stops blinking.  
•Once you adjust white balance manually, the  
setting is retained even if the power is turned off  
or the battery removed.  
•White balance cannot be used when the “SEPIA”  
or “MONOTONE” mode (੬ pg. 24, “Digital  
Effects”) is activated.  
SCROLL  
: When “ON” is selected, the title is  
scrolled from right to left.  
LANGUAGE : Select the language (ENGLISH,  
FRENCH, SPANISH,  
PORTUGUESE) for TITLE.  
To set “SIZE” , “SCROLL” or “LANGUAGE”, rotate  
the MENU Wheel 1 to select the desired item, and  
press it. When the setting begins blinking, rotate  
the MENU Wheel 1 until the correct setting  
appears and then press it. The setting stops  
blinking.  
19  
•With some tapes, better picture quality may not  
be obtained even with S-VHS ET recording. It is  
recommended that you do test record beforehand  
to make sure whether better results can be  
obtained.  
•If the S-VHS ET mode or recording format is  
switched during recording, the playback picture  
will be blurred at the switching point.  
•It is recommended that tapes recorded on this  
camcorder be played back on this camcorder.  
•Tapes recorded in S-VHS or S-VHS ET mode can  
be played back not only on this camcorder but  
also on a Super VHS VCR.  
— Tapes recorded in S-VHS ET mode cannot be  
played back on some VCRs, including some  
JVC VCRs.  
•Tapes recorded in S-VHS or S-VHS ET mode  
cannot be played back correctly on a normal VHS  
VCR.  
SYSTEM MENU  
This Menu Screen cannot be accessed while  
recording.  
REC MODE  
Allows you to set the recording mode. “EP”  
(Extended Play) is more economical, providing  
three times the recording time.  
•If the recording mode is switched during  
recording, the playback picture will be blurred at  
the switching point.  
D. ZOOM  
Zooming is possible from 16X (the optical zoom  
limit), to a maximum of 50X or 600X digital  
magnification.  
When set to “OFF” only optical zoom (maximum  
16x magnification) can function.  
S.LX  
•S-VHS ET does not work with S-VHS tapes.  
•To avoid on-screen noise, do not perform Still  
Playback or Shuttle Search repeatedly.  
•If the picture contains a lot of jitter or noise, use a  
cleaning cassette.  
MAX: To record a subject in a darkly lit  
environment, when it is more convenient to shoot  
the subject with a brighter image even if the picture  
becomes slightly coarse.  
NORMAL: To record a subject in a dimly lit  
environment, when it is more convenient to shoot  
with a less coarse picture although the subject  
becomes slightly dark.  
OFF: Allows you to shoot dark scenes with no  
picture brightness adjustment.  
WIDE  
When set to “ON” black bars will be recorded at the  
top and bottom of the screen to produce a cinema-  
like “wide-screen” effect.  
While the “WIDE” mode is engaged, “LARGE” in  
the “TITLE SETUP (SIZE)” (੬ pg. 19, “CAMERA  
MENU”) cannot be selected.  
S-VHS (S-VHS ET)  
ON:With an S-VHS cassette, “S” appears and the  
camcorder records in S-VHS.  
With a VHS cassette, “S-ET” appears and the  
camcorder records with S-VHS picture quality,  
which is called Super VHS ET (Expansion  
Technology). S-VHS REC appears during  
recording.  
OFF: Records in VHS on a VHS or S-VHS  
cassette.  
•JVC EHG (Extra High Grade) tapes are  
recommended for superior results.  
Use S-VHS tape for storing recordings for an  
extended period or for recording important  
scenes, as it enables higher-quality recording and  
playback.  
20  
TAPE LENGTH  
INT.TIME  
Allows you to set the tape length depending on the  
tape used: T20=20 minutes, T30=30 minutes,  
T35=35 minutes, T40=40 minutes.  
•Tape remaining time W is correct only if the  
correct tape length has been selected.  
You can record sequentially at preset time spans.  
Leaving the camcorder aimed at a specific subject,  
you can record subtle changes over an extended  
period of time (Time-Lapse). REC MODE should  
be set to “SP”.  
(Please note that it is necessary to set the REC  
TIME (Animation) in the SYSTEM MENU before  
performing the INT. TIME (Time-Lapse) function.)  
DISPLAY  
FULL: Makes all of the indications appear on the  
LCD monitor/viewfinder during playback or  
recording.  
Select the desired interval time and press the  
Recording Start/Stop Button 0.  
•Fade- or wipe-in/out cannot be performed.  
•This function is cancelled when the power is shut  
off or when the cassette is ejected.  
•To use this function, it is recommended that  
SCROLL in TITLE SETUP (੬ pg. 18, 19) be set  
to “OFF”.  
SIMPLE: Makes the following indications  
disappear from the LCD monitor/viewfinder during  
recording or playback:  
, tape remaining time,  
, tape length (੬ pg. 9, 17).  
DATE/TIME DISP.  
Makes the date/time appear in the camcorder or on  
a connected monitor (set DATE/TIME in SYSTEM  
MENU first ੬ pg. 7).  
•The selected display will be recorded. If you do  
not want to record the display, select OFF before  
shooting.  
•In the AUTO DATE mode, the camcorder records  
the date for about 5 seconds when recording is  
initiated after the date is changed, a cassette is  
loaded, or AUTO DATE is selected. The date is  
replaced after 5 seconds with “AUTO DATE” but  
this is not recorded.  
TELE MACRO  
When set to “ON”, you can shoot a subject as large  
as possible at a distance of approx. 60 cm (23-5/8").  
Depending on the zoom position, the lens may go  
out of focus.  
OSD OUTPUT  
ON: On-screen indications are displayed.  
OFF: On-screen indications are turned off except  
Date/Time, Instant Title and Warning Indication.  
REC TIME  
You can shoot a series of pictures, each slightly  
different, of the same object for a brief selected  
period of time (Animation). REC MODE should be  
set to “SP”.  
Select the desired recording time and press the  
Recording Start/Stop Button 0 after focusing on  
the subject.  
•Fade- or wipe-in/out cannot be performed.  
•This function is cancelled when the power is shut  
off or when the cassette is ejected.  
•To use this function, it is recommended that  
SCROLL in TITLE SETUP (੬ pg. 18, 19) be set  
to “OFF”.  
21  
DEMO MODE  
LCD BRIGHT  
Demonstrates certain functions automatically.  
Available when the Power Switch @ is set to “  
To adjust the brightness of the LCD monitor,  
perform the following steps quickly (within approx.  
1 second by each interval):  
”
or “ ” and “DEMO MODE” is set to “ON” (factory-  
preset). Performing any operation during the  
demonstration stops the demonstration  
temporarily. Set to OFF to stop completely.  
•When a tape whose erase protection tab is in the  
position that allows recording is loaded in the  
camcorder, demonstration is not available.  
•If you do not detach the Lens Cap, you cannot  
see the actual changes of the Automatic  
Demonstration activated on the LCD monitor or  
viewfinder.  
1) Select “LCD BRIGHT” in SYSTEM MENU. The  
“BRIGHT ON” message appears.  
2) Press the BRIGHT Wheel 1 in to return to  
normal screen.  
3) Rotate the BRIGHT Wheel 1 to display the  
bright level indicator h.  
4) Rotate the BRIGHT Wheel 1 until the appropri-  
ate brightness is reached. After the BRIGHT  
Wheel 1 is released, the indicator soon  
disappears and adjustment is completed.  
DATE/TIME  
Allows you to set the current date and time.  
(੬ pg. 7)  
22  
Programme AE With Special Effects  
ADVANCED FEATURES  
1) Set the Power Switch @ to “ ” while pressing  
down the Lock Button ! located on the switch.  
2) Press P.AE ^ repeatedly until the desired mode  
appears.  
Fade/Wipe Effects  
Fade- or wipe-in works at recording start, and fade-  
or wipe-out works at recording end.  
•To cancel the effect, press P.AE ^ repeatedly  
1) Set the Power Switch @ to “ ” while pressing  
down the Lock Button ! located on the switch.  
2) Press FADE/WIPE w repeatedly until the  
desired mode appears.  
3) Press the Recording Start/Stop Button 0 to  
activate fade-in/out or wipe-in/out.  
•Pressing and holding the Recording Start/Stop  
Button 0 allows you to vary the length for the  
image during fade in/out or wipe in/out.  
•To cancel a fade or wipe, press FADE/WIPE w  
repeatedly until “OFF” appears.  
until “OFF” appears.  
•Only one mode can be engaged at a time.  
•In the “High Speed Shutter” or “Sports” modes,  
picture colour may be adversely affected if the  
subject is lit by alternating discharge-type light  
sources such as flourescent or mercury-vapour  
lights.  
SPORTS: High shutter speed clearly captures  
fast-moving action.  
ND : ND EFFECT: A black mist darkens the  
picture, as when an ND filter is used. Helps to  
counter the effects of glare on the subject.  
FADER: Fades in/out to a black screen.  
MOSAIC (Fader): Gradually turns/returns the  
picture into/from a mosaic pattern.  
FG : FOG: Makes the picture look misty white, as  
when an external fog filter is attached to the lens.  
Softens the image and gives it a “fantasy” look.  
SHUTTER (Wipe): A black screen moves in  
from the top and bottom, closing over the image  
like a shutter, or a new image pushes open the  
black screen vertically from the centre.  
TWILIGHT: Dusk, twilight scenery, fireworks,  
etc., look more natural and dramatic. In this mode,  
the Auto Focus (੬ pg. 12) and S.LX (੬ pg. 20)  
may not work.  
SLIDE (Wipe): A black screen moves in from  
the left to gradually cover the image, or a new  
image moves in from right to left.  
S1/2000 (1/2000 sec. High Speed Shutter):  
Captures faster action than Sports mode. The  
screen becomes slightly dark. Use in well-lit  
situations.  
DOOR (Wipe): Wipes in as the two halves of  
a black screen open to the left and right, revealing  
the scene, or wipes out and the black screen  
reappears from left and right to cover the scene.  
CORNER (Wipe): Wipes in on a black screen  
from the upper right to the lower left corner,  
revealing the scene, or wipes out from lower left to  
upper right, leaving a black screen.  
WINDOW (Wipe): Wipes in on a black screen  
from the centre of the screen towards the corners,  
revealing the scene, or wipe out from the corners  
to the centre, leaving a black screen.  
23  
Digital Effects  
1)Set the Power Switch @ to “ ” while pressing  
down the Lock Button ! located on the switch.  
2)Press DIGIFECT % repeatedly until the desired  
mode appears.  
•To cancel the effect, press DIGIFECT % repeat-  
edly until “OFF” appears.  
SEPIA: Recorded scenes have a brownish tint  
like old photos. Combine this with WIDE in  
SYSTEM MENU for a classic look.  
MONOTONE: Like black and white films, your  
footage is shot in B/W. Combine this with WIDE in  
SYSTEM MENU for a classic look.  
B. FILTER: Recorded scenes have a bluish  
tint.  
R. FILTER: Recorded scenes have a reddish  
tint.  
SOLARI: The picture is recorded with an effect  
similar to a painting.  
NEGA POSI: The colours of a picture are  
reversed.  
MOSAIC: Turns recorded scenes into a mosaic  
pattern.  
STRETCH: Doubles the width of the picture  
horizontally.  
24  
TROUBLESHOOTING  
Before consulting your JVC dealer, please check the following to see if you can correct the problem yourself.  
Vertical white lines appear when shooting a very  
bright object.  
• This sometimes occurs when the contrast between the  
back-ground and the object is great. It is not a defect of  
the camcorder.  
Playback picture is blurred or interrupted.  
• The video heads are dirty or worn out. Consult your  
nearest JVC dealer for head cleaning or replacement.  
The tape stops during fast-forward or rewind.  
• The Counter Memory Function has been activated  
(੬ pg. 14, “Counter Memory”).  
Bright, crystal-shaped spots appear in the LCD  
monitor and the viewfinder.  
• Sunlight is directly entering the lens. This is not a defect  
of the camcorder.  
The date and time displays disappear.  
• If you remove the power source from the camcorder  
while the power is on, all settings and selections are  
erased. Make sure to turn the camcorder’s power off  
before disconnecting the power source.  
Coloured bright spots appear all over the LCD  
monitor or the viewfinder.  
• The LCD monitor and the viewfinder are made with high-  
precision technology. However, black spots or bright  
spots of light (red, green or blue) may appear constantly  
on the LCD monitor or in the viewfinder. These spots are  
not recorded on the tape. This is not due to any defect of  
the unit. (Effective dots: more than 99.99 %.)  
The tape will not eject.  
• The battery pack is running low.  
• If the LCD monitor is not open over 60 degrees, the  
EJECT switch ( does not function.  
The camcorder is a microcomputer-controlled device.  
External noise and interference (from a TV, a radio,  
etc.) might prevent it from functioning properly. In such  
cases, first disconnect its power supply unit (battery  
pack, AC Adapter, etc.); and then re-connect it and  
proceed as usual from the beginning.  
Animation or Time-Lapse is not available.  
• Before recording in the Animation mode at the very  
beginning of a tape, set the camcorder to the Recording  
mode for about 5 seconds, so that the tape runs  
smoothly. Using the Fade-in function at this point is a  
good way to begin an animated programme  
(੬ pg. 21, REC TIME/INT. TIME in SYSTEM MENU).  
The tape is running, but there is no playback picture.  
• The TV has not been set to its VIDEO mode or channel.  
• If A/V connection is used, the TV’s VIDEO/TV Switch  
has not been set to VIDEO.  
Warning Indications  
(high)  
(exhausted) : Displays the battery remaining power level. As the battery power comes  
blinks (battery power warning). When the battery power is exhausted, power  
close to nil, the battery indicator  
turns off automatically.  
: Blinks when no cassette is loaded, or when the erase protection tab is not in the position that allows recording.  
TAPE END: Appears when the tape ends during recording, playback or fast-forward.  
LENS CAP: Appears for 5 seconds after power is turned on if the lens cap is attached.  
CONDENSATION OPERATION PAUSED PLEASE WAIT: These 2 warnings appear alternately every 3 seconds  
if condensation occurs. In this case, all functions except tape eject and power on/off are disabled. Remove the tape,  
turn the unit off (without removing the power supply), wait a few minutes for the warnings to clear, and turn it on again.  
HEAD CLEANING REQUIRED USE CLEANING CASSETTE: These 2 warnings appear alternately every 3  
seconds if dirt is detected on the heads during recording. In this case, use an optional cleaning cassette. If the  
warning remains after cleaning, consult your nearest JVC dealer.  
E01—E06 UNIT IN SAFEGUARD MODE REMOVE AND REATTACH BATTERY: The error indications (E01 — E06)  
show what type of malfunction has occured. If an error indication and warning appear, turn the unit off, remove the  
power supply (battery, etc.) and wait a few minutes for them to clear. When it does, you can resume using the  
camcorder. If the indication remains, consult your nearest JVC dealer.  
25  
CAUTIONS  
When using the AC Adapter in areas other than the USA  
• The provided AC Adapter features automatic voltage  
2. To prevent damage and prolong service  
life . . .  
selection in the AC range from 110 V to 240 V.  
.... do not subject to unnecessary shock.  
.... avoid repeated charging without fully discharging.  
.... charge in an environment where temperatures are within  
the tolerances shown in the chart below. This is a  
chemical reaction type battery—cooler temperatures  
impede chemical reaction, while warmer temperatures can  
prevent complete charging.  
USING HOUSEHOLD AC PLUG ADAPTER  
In case of connecting the unit’s AC Adapter to an AC wall  
outlet other than American National Standard C73 series type  
use an AC plug adapter, called a “Siemens Plug”, as shown.  
For this AC plug adapter, consult your nearest JVC dealer.  
.... store in a cool, dry place. Extended exposure to high  
temperatures will increase natural discharge and shorten  
service life.  
Plug adapter  
.... fully charge and then fully discharge the battery every  
6 months when storing the battery pack over a long period  
time.  
.... remove from charger or powered unit when not in use, as  
some machines use current even when switched off.  
• It is normal for the battery pack to be warm after charging, or  
after use.  
• If there is dust or dirt on the AC Adapter, wipe it clean before  
using.  
Video Light  
DANGER:  
Temperature Range Specifications  
Charging ................ 10°C to 35°C (50°F to 95°F)  
Operation ............... 0°C to 40°C (32°F to 104°F)  
Storage .................. –10°C to 30°C (14°F to 86°F)  
• Recharging time is based on room temperature of 20°C  
(68°F).  
• The video light becomes extremely hot. Do  
not touch it either while in operation or soon  
after turning it off, otherwise serious injury  
may result.  
• Do not place the camcorder into the carrying case  
immediately after using the video light, since it remains  
extremely hot for some time.  
• When operating, keep a distance of about 30 cm  
between the video light and people or object.  
• Do not use near flammable or explosive materials.  
• It is recommended that you consult your nearest JVC dealer  
• The lower the temperature, the longer recharging takes.  
Cassettes  
To properly use and store your cassettes, be sure to read the  
following cautions:  
1. During use . . .  
.... make sure the cassette bears the S-VHS-C or  
VHS-C mark.  
for replacing the video light.  
.... be aware that recording onto prerecorded tapes  
automatically erases the previously recorded video and  
audio signals.  
.... make sure the cassette is positioned properly when  
inserting.  
.... do not load and unload the cassette repeatedly without  
allowing the tape to run at all. This slackens the tape and  
can result in damage.  
General Battery Precautions  
If the cassette adapter is not functioning even if it is being  
operated correctly, the batteries are exhausted. Replace them  
with fresh ones.  
Please make note of the following rules for battery use. When  
misused, the batteries can leak or explode.  
1. When replacing batteries, read the cassette adapter  
.... do not open the front tape cover. This exposes the tape to  
fingerprints and dust.  
(C-P6U/C-P7U) instructions.  
2. Do not use any different size of batteries from those  
specified.  
2. Store cassettes . . .  
.... away from heaters or other heat sources.  
.... out of direct sunlight.  
.... where they won’t be subject to unnecessary shock or  
vibration.  
.... where they won’t be exposed to strong magnetic fields  
(such as those generated by motors, transformers or  
magnets).  
3. Be sure to install batteries in the correct direction.  
4. Do not use rechargeable batteries.  
5. Do not expose the batteries to excessive heat as they can  
leak or explode.  
6. Do not dispose of the batteries in a fire.  
7. Remove the batteries from the unit if it is to be stored for an  
extended period to avoid battery leakage which can cause  
malfunctions.  
.... vertically, in their original cases.  
Main Unit  
1. For safety, DO NOT . . .  
.... open the camcorder’s chassis.  
Battery Packs  
The battery packs are nickel-cadmium or  
nickel metal-hydride batteries. Before using  
the supplied battery pack or an optional  
battery pack, be sure to read the following  
cautions:  
.... disassemble or modify the unit.  
.... short-circuit the terminals of the battery pack. Keep it  
away from metallic objects when not in use.  
.... allow inflammables, water or metallic objects to enter the  
unit.  
.... remove the battery pack or disconnect the power supply  
while the power is on.  
.... leave the battery pack attached when the camcorder is not  
in use.  
1. To avoid hazard . . .  
.... do not burn.  
.... do not short-circuit the terminals.  
.... do not modify or disassemble.  
.... use only specified chargers.  
Terminals  
26  
2. Cleaning The Camcorder  
2. Avoid using the unit . . .  
.... in places subject to excessive humidity or dust.  
.... in places subject to soot or steam such as near a cooking  
stove.  
1
Wipe gently the exterior with a soft cloth. Put cloth in  
diluted mild soap and wring it well to wipe off heavy dirt,  
then wipe again with a dry cloth.  
.... in places subject to excessive shock or vibration.  
.... near a television set.  
.... near appliances generating strong magnetic or electric  
fields (speakers, broadcasting antennas, etc.).  
.... in places subject to extremely high (over 40°C or 104°F)  
extremely low (under 0°C or 32°F) temperatures.  
Open the LCD monitor and wipe it gently with a soft  
cloth. Be careful not to damage the monitor. Close the  
LCD monitor.  
Blow the lens with a blower brush, then wipe it gently  
with lens cleaning paper.  
3. DO NOT leave the unit . . .  
.... in places of over 50°C (122°F).  
.... in places where humidity is extremely low (below 35%) or  
extremely high (above 80%).  
5
6
Turn the eyepiece counterclockwise and pull it out.  
Remove dust from the viewfinder using a blower brush.  
Re-attach the eyepiece and turn it clockwise.  
.... in direct sunlight.  
• Avoid using strong cleaning agents such as benzine or  
alcohol.  
.... in a closed car in summer.  
.... near a heater.  
.... in dusty places such as a beach.  
• Cleaning should be done only after the battery pack has  
been removed or other power units have been disconnected.  
• Mould may form if the lens is left dirty.  
• When using a cleaner or chemically treated cloth, refer to  
the cautions that came with it.  
4. To protect the unit, DO NOT . . .  
.... allow it to become wet.  
.... drop the unit or strike it against hard objects.  
.... subject it to shock or excessive vibration during transpor-  
tation.  
.... keep the lens directed at extremely bright objects for long  
periods.  
.... direct the eyepiece of the viewfinder at the sun.  
.... carry it by holding the viewfinder or the LCD monitor. Be  
sure to hold the main unit with both hands or use the grip.  
.... swing it excessively when using the shoulder strap.  
• When removing the eyepiece, be sure to hold the viewfinder  
securely.  
This device complies with Part 15 of FCC Rules. Operation is  
subject to the following two conditions:  
(1) This device may not cause harmful  
interference, and (2) this device must accept any interference  
received, including interference that may cause undesired  
operation.  
LCD Monitor  
1. To prevent damage to the LCD monitor,  
DO NOT . . .  
Change or modifications not approved by the party responsible  
for compliance could void the user’s authority to operate the  
equipment. This equipment has been tested and found to  
comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for  
help.  
.... push it strongly or apply any shocks.  
.... place the camcorder with the LCD monitor on the bottom.  
2. To prolong service life . . .  
.... avoid rubbing it with coarse cloth.  
3. Be aware of the following phenomena for LCD monitor  
use.These are not malfunctions:  
• While using the camcorder, the surface around the LCD  
monitor and/or the back of the LCD monitor may heat up.  
• If you leave power on for a long time, the surface around the  
LCD monitor becomes hot.  
About moisture condensation . . .  
• You may have observed that pouring a cold liquid into a  
glass will cause drops of water to form on the glass’  
outer surface. This same phenomenon occurs on the  
head drum of a camcorder when it is moved from a cool  
place to a warm place, after heating a cold room, under  
extremely humid conditions or in a place directly  
subjected to the cool air from an air conditioner.  
• Moisture on the head drum can cause severe damage to  
the video tape, and can lead to internal damage to the  
camcorder itself.  
Serious malfunctioning  
If malfunctioning occurs, stop using the unit immediately  
and consult your local JVC dealer.  
This Class B digital apparatus complies with Canadian  
ICES-003.  
For Your Maintenance  
Cet appareil numérique de la classe B est conforme à la  
norme NMB-003 du Canada.  
1. After Use  
1
Set the Power Switch to “OFF” to turn off the  
camcorder.  
Open the LCD monitor to an angle of over 60 degrees.  
Slide EJECT to open the cassette holder, then remove  
the cassette.  
Close and lock the cassette holder by pressing the  
Close button.  
Close and lock the LCD monitor.  
Slide BATTERY RELEASE to remove the battery pack.  
Attach the provided lens cap to the camcorder’s lens.  
27  
SPECIFICATIONS  
Viewfinder  
: Electronic viewfinder with 0.5"  
black/white CRT  
Camcorder  
General  
White balance  
adjustment  
LCD monitor  
: Auto/Manual adjustment  
: 2.5" diagonally measured, LCD  
panel/TFT active matrix system  
Format  
Power source  
: S-VHS/VHS standard  
: DC 11 V  
DC 6 V  
(Using AC Adapter)  
(Using battery pack)  
Speaker  
: Monaural  
Power consumption  
Viewfinder on  
LCD monitor on  
Video light  
: 4.5 W  
: 5.0 W  
: 3.0 W  
Connectors  
Video  
: 1 V (p-p , 75 Ω unbalanced,  
)
analog output (via Video output  
connector)  
: 300 mV (rms), 1 kΩ analog output  
Signal system  
Video recording system  
Luminance  
Color  
: NTSC-type  
Audio  
: FM recording  
: Converted sub-carrier direct  
recording  
(via Audio output connector)  
S-Video  
: Y : 1 V (p-p , 75 Ω, analog  
)
Conforms to VHS standard  
output  
C : 0.29 V (p-p , 75 Ω, analog  
)
Cassette  
Tape speed  
:
/
cassette  
output  
SP  
EP  
: 33.35 mm/sec. (1-5/16 ips)  
: 11.12 mm/sec. (7/16 ips)  
AC Adapter  
Recording time (max.)  
Power requirement  
U.S.A. and Canada : AC 120 V`, 60 Hz  
Other countries  
Output  
SP  
EP  
: 40 minutes  
: 120 minutes  
: AC 110 V to 240 V`, 50 Hz/60 Hz  
: DC 11 V , 1 A  
(with TC-40 cassette)  
Operating  
temperature  
Operating humidity : 35% to 80%  
: 0°C to 40°C (32°F to 104°F)  
Optional Accessories  
Storage temperature : –20°C to 50°C (–4°F to 122°F)  
• Battery Packs BN-V12U, BN-V20U, BN-V400U  
• A/V (Audio/Video) Cable  
• S-Video Cable  
• Compact S-VHS (  
• Active Carrying Bag CB-V7U  
Weight  
: Approx. 870 g (2.0 lbs)  
Dimensions  
(W x H x D)  
: 113 mm x 117 mm x 199 mm  
(4-1/2" x 4-5/8" x 7-7/8")  
(with the LCD monitor closed and  
with the viewfinder fully tilted  
downward)  
) Cassettes ST-C-40/30/20  
• Compact VHS (  
) Cassettes TC-40/30/20  
Pickup  
Lens  
: 1/6" format CCD  
: F1.6, f = 2.7 mm to 43.2 mm,  
16:1 power zoom lens with auto  
iris and macro control, filter  
diameter 40.5 mm  
Some accessories are not available in some areas.  
Please consult your nearest JVC dealer for details on  
accessories and their availability.  
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to  
change without notice.  
28  
ESPAÑOL — ALIMENTACIÓN  
Enganche.  
USO DE LA BATERIA  
Efectúe el paso 1) de “CARGA DE LA BATERIA”.  
Tiempo de grabación aproximado (unidad: min)  
Empuje.  
Batería  
Visor conectado  
Monitor LCD  
conectado  
BN-V11U  
80  
(45)  
75  
(40)  
Conmutador de  
alimentación  
Conmutador  
BATTERY RELEASE  
BN-V12U  
(opcional)  
80  
(45)  
75  
(40)  
BN-V20U  
(opcional)  
135  
(75)  
120  
(70)  
Batería  
BN-V400U  
(opcional)  
315  
(165)  
285  
(180)  
(
):cuando el foco de video está encendido  
Al jack de  
entrada de CC  
(DC IN)  
USO DE LA ALIMENTACIÓN DE CA  
A la toma  
de corriente  
alterna  
Conecte el adaptador de CA en la cámara de video  
Adaptador  
de CA  
(੬ pasos 2) y 3) de “CARGA DE LA BATERÍA”).  
• El adaptador de CA suministrado presenta una  
selección automática de voltaje con límites de CA de  
110 V a 240 V.  
CARGA DE LA BATERIA  
1) Asegúrese de que la batería esté colocada en la  
cámara de video. Enganche el extremo a la  
cámara de video y presione la batería hacia el  
interior hasta que quede bloqueada en su lugar.  
• Si la batería está colocada en la posición  
equivocada, puede ocurrir un fallo.  
ATENCIÓN  
Antes de retirar la fuente de alimentación, asegúrese  
que la alimentación de la cámara de video esté  
desactivada. De lo contrario puede ocurrir un fallo en  
la cámara de video.  
2) Ajuste el conmutador de alimentación @ en “OFF”  
mientras presiona el botón de bloqueo !  
localizado en el conmutador. Conecte el adaptador  
de alimentación CA al jack de entrada de CC (DC  
IN) 9.  
REFRESCO:  
Asegúrese de descargar completamente una batería  
antes de recargarla, de lo contrario, el desempeño de  
la batería será reducido.  
3) Enchufe el adaptador de alimentación CA en una  
toma de corriente alterna. La lámpara indicadora  
CHARGE ) de la cámara de video parpadeará  
para indicar que la carga se ha iniciado.  
4) Cuando la lámpara indicadora CHARGE ) pare de  
parpadear, pero permanece encendida, la carga ha  
finalizado. Desenchufe el adaptador de  
alimentación CA de la toma de corriente alterna.  
Desconecte el adaptador de alimentación CA de la  
cámara de video.  
1) Ejecute los pasos de 1) hasta 3) de “CARGA DE  
LA BATERÍA”.  
2) Presione REFRESH q durante más de  
2 segundos. La lámpara POWER $ destellará  
para indicar que la descarga se ha iniciado.  
3) Cuando finalice la descarga, la carga será iniciada  
automáticamente y la lámpara CHARGE )  
empieza a destellar.  
El marcador de carga le ayuda a recordar  
si la batería ha sido cargada o no. Son  
suministrados dos colores (rojo y negro) —  
usted elije qué color significa que está  
cargada y qué color significa que está  
descargada.  
Para la extracción de la batería . . .  
... deslice BATTERY RELEASE 8 y extraiga la  
batería.  
Batería  
BN-V11U  
Tiempo de carga  
aprox. 1 h 40 min  
aprox. 1 h 40 min  
aprox. 2 h 40 min  
aprox. 5 h 10 min  
BN-V12U (opcional)  
BN-V20U (opcional)  
BN-V400U (opcional)  
Los tiempos de carga son para una batería  
completamente descargada.  
29  
•La siguiente operación interrumpirá la carga o la  
descarga:  
•Ajuste el interruptor de alimentación @ en  
“PLAY”, “ ” o “ ”.  
•Desconecte el adaptador de CA de la cámara de  
video.  
•Desenchufe el adaptador de CA del  
tomacorriente de CA.  
•Extraiga la batería de la cámara de video.  
•Utilizando el adaptador de alimentación/cargador  
de CA AA-V15, es posible cargar la batería  
BN-V11U/V12U/V20U/V400U sin la cámara de  
video. Sin embargo, no es posible utilizarlo como  
un adaptador de CA.  
•Para evitar interferencias en la recepción, no  
utilice el adaptador de CA cerca de una radio.  
•El tiempo de grabación es significativamente  
reducido cuando el modo de zoom o el modo de  
espera de grabación es activado repetidamente o  
el monitor LCD es utilizado repetidamente.  
•Antes del uso prolongado, se recomienda que  
prepare suficiente batería para cubrir 3 vezes el  
tiempo de filmación planeado.  
ALMACENAMIENTO DE LAS PILAS:  
Antes de almacenar los paquetes de pilas por un  
largo período de tiempo, asegurarse de  
descargarlos completamente tomando las  
siguientes medidas para no reducir el rendimiento  
de la pilas.  
1) Coloque la pila en la videocámara sín ningún  
cassette insertado.  
2) Ajuste el conmutador de alimentación @ en  
“
” o “ ” mientras presiona el boton de  
bloqueo ! localizado en el conmutador.  
•Durante la carga o descarga, la cámara de video  
no puede ser operada.  
•No es posible efectuar la carga o descarga si se  
utiliza un tipo de batería equivocado.  
•Cuando efectúe la carga de la batería por primera  
vez o después de un largo periodo de  
almacenamiento, la lámpara CHARGE ) puede  
no se encender. Retire la batería de la cámara de  
video, luego intente la carga nuevamente.  
•Si el tiempo de funcionamiento de una batería  
completamente cargada es extremadamente  
corta, la batería puede estar estropeada.  
Adquiera una nueva batería.  
•Efectúe la carga en lugares donde la temperatura  
sea entre 10˚C y 35˚C. La gama de temperatura  
ideal para efectuar la carga es de 20˚C a 25˚C. Si  
el ambiente es muy frío, la carga puede resultar  
incompleta.  
•El tiempo de carga varía de acuerdo con la  
temperatura ambiente y el estado de la batería.  
•Ya que el adaptador de CA procesa electricidad  
internamente, el mismo se calentará durante el  
uso. Asegúrese de utilizarlo sólo en áreas bien  
ventiladas.  
30  
ESPAÑOL — GUIA PARA OPERACION RAPIDA  
Si la unidad comienza a funcionar mal, deje de usarla inmediatamente y consulte a su concesionario  
local de JVC.  
Colocación/Extracción de un  
cassette  
GRABACIÓN  
1) Retire el cubreobjetivo. Ajuste el conmutador de  
1) Abra completamente el monitor LCD y  
manténgalo alineado verticalmente con la  
cámara (no lo lnclinc de un lado). Deslice  
EJECT ( hasta que el compartimiento de  
cassete se abra. No aplique fuerza para abrirlo.  
2) Inserte o retire un cassette. Cuando lo inserte,  
asegúrese de que la etiqueta esté hacia fuera.  
F aparece cuando un cassette es insertado.  
3) Presione el botón de cierre u para cerrar el  
compartimiento de cassette hasta que se trabe.  
Cierre el monitor LCD.  
•Cerrar el monitor LCD mientras que el  
compartimiento de cassette todavia está abierto  
puede causar daños en el monitor LCD.  
•Asegúrese que la lengüeta de protección contra  
borrado esté en la posición que permite la  
grabación. De lo contrario, deslice la lengüeta.  
Algunos cassettes tienen lengüetas extraíbles. Si  
la lengüeta ha sido extraída, cubra el orificio con  
cinta adhesiva.  
alimentación @ en “  
o
mientras presiona el  
botón de bloqueo ! localizado en el conmutador.  
Filmación utilizando el visor: Asegúrese que  
el monitor LCD esté cerrado y bloqueado.  
Filmación utilizando el monitor LCD:  
Asegúrese que el monitor LCD esté  
completamente abierto.  
La cámara de video ingresa al modo de Espera  
de grabación y PAUSE D es mostrado.  
•El vísor y el monitor LCD no pueden ser utilizados  
simultáneamente en esta videocámara. Por lo  
tanto, cuando abra el monitor LCD y lo incline  
hacia arriba hasta 180˚, no será posible visualizar  
ninguna imagen en el visor, sin embargo, podrá  
filmarse a si mismo mientras visualiza su propia  
imagen en el monitor LCD.  
2) Presione el botón de inicio/parada de grabación  
0. P aparece mientras la grabación está en  
progreso.  
•Para interrumpir la grabación, presione el botón  
de inicio/parada de grabación 0. La cámara de  
video reingresa al modo de espera de grabación.  
•El compartimiento de cassette no puede ser  
abierto mientras la cámara de video está en el  
modo de grabación o desconectada de la fuente  
de alimentación.  
Para ajustar el brillo del monitor LCD:  
Cuando el conmutador de alimentación @ está  
ajustado en “ ”, ajuste “LCD BRIGHT” en  
SYSTEM MENU (੬ pág. 18, 22).  
Compartimiento de cassette  
Cuando el conmutador de alimentación @ está  
ajustado en “ ” u “OFF”, este ajuste no puede  
ser ejecutado.  
(
Rueda dentada  
Girar para  
eliminar la  
distensión.  
Lengüeta de protección  
contra borrado  
u
@
!
0
31  
REPRODUCCIÓN  
O simplemente reproduzca la cinta en un VCR  
de VHS utilizando el adaptador de cassette.  
੬ p. 16  
1) Cargue una cinta.  
2) Ajuste el conmutador de alimentación @ en  
“PLAY” mientras presiona el botón de bloqueo !  
localizado en el conmutador. Para iniciar la  
reproducción, presione 4/6 &.  
1
Para interrumpir momentáneamente  
(reproducción de imágenes fijas), presione 4/6  
&. Para interrumpir la reproducción, presione 5  
&
*
e
r. Presione  
2
e para rebobinar, o  
3
*
para avanzar rápido la cinta. La búsqueda de  
imagen a alta velocidad (Búsqueda rápida) es  
posible presionando  
reproducción (manteniendo presionado  
* durante la reproducción continuará la  
búsqueda hasta que sea liberado). Para  
2
e o  
3
* durante la  
r
2
e o  
!
@
3
reanudar la reproducción normal, presione 4/6  
&.  
Para GRABACIÓN DE VÍDEO/REPRODUCCION  
DE VÍDEO  
•La cámara de video se desactiva automáticamente  
después de 5 minutos en el modo de espera de  
grabación o modo de parada. Para activarla otra  
vez, ajuste el conmutador de alimentación @ en  
OFF, luego en “ ”, “ ” o “PLAY”.  
•Cuando el conmutador de alimentación @ esté  
ajustado en “ ”, “ ” o “PLAY” y el monitor LCD  
está abierto en un ángulo de 60 grados o más, el  
monitor LCD se enciende y el visor se apaga  
automáticamente para ahorrar energía.  
•La imagen reproducida puede ser visualizada en  
el visor (con el monitor LCD apagado), en el  
monitor LCD o en un TV conectado (੬ pág. 15,  
“Conexiones a un TV/VCR”).  
•Para retirar las conexiones , ੬ pág. 21,  
DISPLAY o OSD OUTPUT en SYSTEM MENU.  
•Para controlar el volumen de los altavoces,  
deslice MENU 1 hacia “+” para aumentarlo o  
hacia “–” para disminuirlo. Mientras filme, el  
sonido no será escuchado desde los altavoces.  
32  

AmpliVox S314 User Manual
Audiovox Car Video System VBP4000 User Manual
Boss Audio Systems Flip Down TFT Monitor BV90F User Manual
Canon Eos 1d X Digital Slr Camera 5253B002 User Manual
Casio FX 300ESPLUS User Manual
Clarion XH7110 User Manual
Hobie 38584001 User Manual
JVC Camcorder TK C720 User Manual
JVC Car Video System DT X91H User Manual
JVC GR AX610U User Manual