COMPACT VHS CAMCORDER
CONTENTS
GETTING STARTED
6 – 13
Power............................................. 6
Clock (Lithium) Battery Insertion/Removal ... 8
Date/Time Settings ............................. 9
Recording Mode Setting ...................... 10
Tape Length Setting ........................... 10
Loading/Unloading A Cassette .............. 11
Grip Adjustment ............................... 12
Viewfinder Adjustment ....................... 12
Shoulder Strap Attachment .................. 13
Tripod Mounting ............................... 13
GR-FXM45
GR-FXM15
RECORDING
14–37
Basic Recording ................................ 14
Basic Features ................................. 18
Advanced Features ............................ 23
PLAYBACK
38–43
Basic Playback ................................. 38
Features ........................................ 39
Using The Cassette Adapter ................. 41
Basic Connections And Tape Dubbing ....... 42
USING THE REMOTE
CONTROL UNIT
44–51
Random Assemble Editing .................... 46
Insert Editing................................... 50
Audio Dubbing ................................. 51
USER MAINTENANCE
TROUBLESHOOTING
INDEX
52
53–54
55–58
Indications...................................... 55
Controls, Connectors And Indicators ........ 56
Terms ........................................... 58
INSTRUCTIONS
CAUTIONS
SPECIFICATIONS
59–60
61
LYT0336-001B
EN3
ATTENTION USERS OF
RECHARGEABLE BATTERIES
DO NOT DISPOSE RECHARGEABLE BATTERIES OR PRODUCTS POWERED BY NON-
REMOVABLE RECHARGEABLE BATTERIES, THESE BATTERIES AND PRODUCTS CAN BE
RECYCLED.
AT THE END OF NORMAL LIFE,
IN AUSTRALIA, RETURN TO YOUR POINT OF PURCHASE OR MAIL TO:
Hagemeyer (Australasia) B.V. 5-7 Garema Circuit Kingsgrove NSW 2208 Australia
Attn : Service Dept.
Phone : (02)750 3777
IN NEW ZEALAND, PLEASE RETURN BATTERIES BY MAIL TO:
Hagemeyer (NZ) Limited P.O. Box 100589 Auckland 1000
Phone : (09)415 8758
MAJOR FEATURES
4
EN
REMEMBER
Picture Stabilizer (੬ pg. 20)
Digital Hyper Zoom
(੬ pg. 18)
Zoom in
Programme AE with Special
Effects (੬ pg. 24, 25)
Zoom out
Ⅲ Electronic Fog Filter
Ⅲ ND Effect Ⅲ Sepia Ⅲ Twilight
Ⅲ Sports Ⅲ Nega/Posi
Ⅲ 1/2000 sec. High Speed Shutter
PROVIDED ACCESSORIES
LCD Colour Monitorc (
੬
pg. 16)
•AC Power Adapter/
Charger AA-V15EA
•Cassette Adapter
C-P7U
T
W
•Remote Control
RM-V700U
(GR-FXM45 only)
•Battery Pack
BN-V20U
Snapshot (GR-FXM45 only)
(੬ pg. 22)
•Editing Cable
(GR-FXM45 only)
•Audio/Video
(A/V) Cable
5-Sec. Recording
(GR-FXM15 only) (੬ pg. 20)
•Lithium Battery
CR2025
• x1 for GR-FXM15
(clock operation)
• x2 for GR-FXM45
(clock operation
and remote control)
Menu Adjustment
(੬ pg. 28, 29, 30)
•DC Cord
Integrated Auto Light
(GR-FXM45 only) (੬ pg. 21)
•Shoulder Strap
QUICK OPERATION GUIDE
EN5
INSERTING A VIDEO CASSETTE
SUPPLY POWER
Hook on.
A
4 PUSH Button
B Push in.
3
1
2
EJECT Switch
BATTERY RELEASE
1 Open the LCD monitor to an angle of over 60
Using the battery pack
degrees.
Hook its end to the camcorder ( ) and push the
battery pack in until it locks in place ( ).
(Charging procedure, ੬ pg. 6)
2 Slide EJECT to open the cassette holder.
3 Insert a video cassette.
4 Press PUSH to close the cassette holder.
(For more details, ੬ pg. 11)
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery
pack.
PLAYBACK
SHOOTING
REW (2) Button
2
1
LENS COVER
Open/Close Ring
2
Set to “AUTO”
or “PRO.”
3
PLAY/PAUSE
STOP
(5) Button
1
Recording Start/Stop Button
3
(
4/6) Button
Set to “PLAY”
1 Set the Power Switch to “PLAY”.
1 Turn the LENS COVER Open/Close Ring to
open the lens cover.
2 Press REW (2).
— The tape will automatically stop at the
beginning of the tape.
2 Set the Power Switch to “AUTO” or “PRO.”.
— The power lamp will light and an image
will appear.
3 Press PLAY/PAUSE (4/6).
— Playback starts and the playback picture
appears.
3 Press the Recording Start/Stop Button.
— Recording starts.
•To stop playback, press STOP (5).
(For more details, ੬ pg. 38)
•To stop recording temporarily, momentarily
press the Recording Start/Stop Button once
again.
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
(For more details, ੬ pgs. 14, 15)
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
Or simply play back the tape on a VHS VCR
using the Cassette Adapter ੬ pg. 41.
GETTING STARTED
6
EN
Marks
Power
To AC outlet
This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
CHARGE indicator
NOTES:
● No function is available without power supply.
● Use only the specified power supply.
● Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
REFRESH switch
SUPPLY POWER
REFRESH indicator
1 Connect the charger’s AC power cord to a wall outlet.
ATTACH BATTERY PACK
REFRESH
2 Align the marks and slide the battery pack in the
The AC Power Adapter/Charger features a
REFRESH function that allows you to fully
discharge the battery pack before recharg-
ing.
direction of the arrow until it locks in place.
•The CHARGE indicator begins blinking to indicate
charging has started.
Perform the REFRESH function after no less
than 5 chargings.
DETACH BATTERY PACK
3 When the CHARGE indicator stops blinking but stays
To discharge the battery . . .
lit, charging is finished. Slide the battery pack
opposite the direction of the arrow.
.... attach the battery pack to the adapter as
shown in the above illustration. Then
push REFRESH. The REFRESH indicator
lights when discharging starts, and goes
out when discharging is complete.
Battery pack
BN-V12U
Charging time
Discharging time
approx. 3 hrs. 30 min.
approx. 6 hrs. 40 min.
approx. 1 hr. 10 min.
approx. 1 hr. 50 min.
BN-V20U
USING THE BATTERY PACK
Hook on.
A
ATTACH BATTERY PACK
1 Hook its end to the camcorder (
) and push the
Push in.
B
battery pack in until it locks in place ( ) .
DETACH BATTERY PACK
2 Slide BATTERY RELEASE and pull out the battery
pack.
Approximate recording time (unit: min.)
LCD
LCD
LCD
Battery pack monitor on/
monitor off/
monitor on/
Viewfinder off Viewfinder on Viewfinder on
BN-V12U
BN-V20U
60 (35)
95 (60)
65 (40)
50 (35)
85 (55)
BATTERY RELEASE
105 (65)
(
) : when the video light is on (GR-FXM45 only).
INFORMATION:
ATTENTION:
The High Capacity battery pack BN-V856U (optional)
provides approx. 7 hours of recording time when the
viewfinder is on and the LCD monitor and the video light
are off.
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
It is impossible to charge the BN-V856U battery pack
using the provided AC Power Adapter/Charger. Use the
optional AA-V80EG AC Power Adapter/Charger.
EN7
Charge Marker
A charge marker is provided on the battery pack to
help you remember whether it has been charged or
not. Two colours are provided (red and black)—you
choose which one means charged and which means
discharged.
Charge marker
NOTES:
● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the
frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.
● Charging times noted on page 6 are for a fully discharged battery pack, and discharging times are for a fully
charged battery pack.
● Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
your camcorder.
● Perform the REFRESH function after no less than 5 chargings.
● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does
not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/
Charger to store it.
● High temperatures can damage the battery pack, so use only where good ventilation is available. Do not
allow it to discharge in a container, such as a bag.
● If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter’s AC cord.
● Remove the battery pack from the adapter immediately after discharging.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● Make sure you unplug the DC cord before charging or discharging the battery pack.
● The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been
stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The
CHARGE indicator should blink during recharging. If not, contact your nearest JVC dealer.
USING AC POWER
To AC outlet
To DC IN jack
Use the AC Power Adapter/Charger (connect as
shown in the illustration).
DC OUT
terminal
NOTES:
● The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from
110 V to 240 V.
● When using the DC cord, make sure you connect
the end of the cord with the core filter to the
camcorder. The core filter reduces interference.
AC Power
Adapter/Charger
AA-V15EA
DC Cord
USING A CAR BATTERY
To car’s
cigarette
lighter
Use the optional Car Battery Charger/Adapter
(connect as shown in the illustration).
socket
NOTES:
● When using the car battery, leave the engine
idling.
● The optional Car Battery Charger/Adapter (BH-V3E)
can also be used to charge the battery pack (except
BN-V20U/V856U).
● When using the optional Car Battery Charger/
Adapter, refer to the respective instruction booklet.
Car Battery
Charger/Adapter
BH-V3E (optional)
GETTING STARTED (cont.)
8
EN
Slot
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
SWITCH OFF POWER
1 Switch off the unit’s power and remove the power
supply unit (battery pack, AC Power Adapter/Battery
Charger, etc.).
REMOVE BATTERY HOLDER
2 Pull out the battery holder.
Battery holder
INSERT BATTERY IN HOLDER
3 Insert the battery in the holder, and be sure to have
the “+” mark visible.
RE-INSERT HOLDER
4 Slide the holder back into the slot until you hear a
click.
NOTES:
● See “SAFETY PRECAUTIONS” (੬ pg. 2) for information
on safe handling of lithium batteries.
● To avoid losing the battery and/or battery holder, place
the camcorder with the grip side up as shown in the
illustration when inserting/removing the battery.
EN9
Date/Time Settings
ACCESS MENU SCREEN
1 Set the Power Switch to “PRO.”, then press MENU.
•The power lamp comes on.
SELECT FUNCTION
2 Rotate the Select Dial to move the highlight bar to
“DATE/TIME”, then press it. The DATE/TIME Menu
appears.
•If you decide you want to return the date and time
to the previous settings, rotate the Select Dial to
move the highlight bar to “EXIT” and press it, then
go to step 6.
MENU Button
Power lamp
•If you want to set only the time without changing
the date, go to step 4.
SET DATE
3 Rotate the Select Dial to move the highlight bar to the
item you want to set and then press it. When the
setting begins blinking, rotate the Select Dial until the
correct setting appears and then press it. The setting
stops blinking.
Select Dial
Display
Power Switch
Menu Screen
•Repeat this procedure until you’re satisfied with the
Date settings (“YEAR”, “MONTH” and “DAY”).
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
SET TIME
TELE MACRO OFF
DATE TIME
4 Rotate the Select Dial to move the highlight bar to
TAPE LENGTH T45
“TIME” and then press it. When the hour setting
begins blinking, rotate the Select Dial until the correct
setting appears and then press it. When the hour
setting stops blinking and the minute setting begins
blinking, rotate the Select Dial until the correct setting
appears and then press it. The minute setting stops
blinking.
4
RETURN
DATE TIME
DATE/TIME Menu
24-hour indication
YEAR
MONTH
DAY
1999
1
1
TIME
22 : 50
START CLOCK OPERATION
5 When none of these settings (YEAR, MONTH, DAY,
TIME) blinks, rotate the Select Dial to move the
highlight bar to “EXIT”, and press it. The Menu
Screen reappears with the highlight bar on
“RETURN”.
EXIT
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
CLOSE MENU SCREEN
TELE MACRO OFF
DATE TIME
6 Press the Select Dial.
TAPE LENGTH T45
NOTE:
4RETURN
To display the date and time in the camcorder’s display
and on a connected TV, see “Date/Time Insert”
(੬ pg. 26).
GETTING STARTED (cont.)
10
EN
Recording Mode Setting
Set depending on your preference.
SET RECORDING MODE
1 First set the Power Switch to “AUTO” or “PRO.”.
Press SP/LP for more than 1 second. “SP” (Standard
Play) provides higher picture and sound quality and is
better for dubbing, while “LP” (Long Play) is more
economical, providing twice the recording time.
NOTE:
MENU Button
SP/LP Recording Mode Button
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Select Dial
Viewfinder
Power Switch
Tape Length Setting
Set the tape length according to the length of the tape
used.
T45
Tape length indicator
SP
ACCESS MENU SCREEN
1 First set the Power Switch to “PRO.”. Press MENU.
Recording mode
indicator
SELECT FUNCTION
2 Rotate the Select Dial to move the highlight bar to
“TAPE LENGTH”, then press it. The TAPE LENGTH
Setting Menu appears.
Display
SET TAPE LENGTH
3 Rotate the Select Dial to move the highlight bar to the
4
NEXT
Menu Screen
M.W.B.
AUTO
ON
correct setting. T30 = 30 minutes of recording time,
T45 = 45 minutes, and T60 = 60 minutes.
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
•If you decide you want to return the tape length to
the previous setting, rotate the Select Dial to move
the highlight bar to “EXIT”.
4RETURN
CLOSE MENU SCREEN
TAPE LENGTH
TAPE LENGTH
Setting Menu
4 Press the Select Dial. The Menu Screen reappears
T30
T45
T60
with the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
NOTE:
The tape remaining time (੬ pg. 15) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
EXIT
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T60
4RETURN
EN11
Cassette holder
Loading/Unloading A Cassette
OPEN LCD MONITOR
1 Open the LCD monitor to an angle of over 60
degrees.
OPEN CASSETTE HOLDER
2 Slide EJECT until the holder opens. Do not use force
to open.
INSERT/REMOVE CASSETTE
3 Make sure the label is facing outward.
PUSH Button
EJECT Switch
CLOSE CASSETTE HOLDER
4 Press PUSH and make sure the holder is closed and
locked.
CLOSE LCD MONITOR
5 First make sure the holder is closed. Then close the
LCD monitor.
Turn to take
up slack.
NOTES:
● Closing the LCD monitor while the cassette holder is still
open may cause damage to the LCD monitor.
● The cassette holder can’t be opened unless a power
supply is attached.
Erase Protection
Gear
● Make sure that the tape is not slack when loading the
cassette. If there is any slack, turn the gear on the
cassette in the direction of the arrow to take up the
slack.
● Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes
have removable tabs. If the tab has been removed, cover
the hole with adhesive tape.
● The cassette holder cannot be opened while the
camcorder is in the record mode.
GETTING STARTED (cont.)
Grip Adjustment
12
EN
Power Zoom Lever
EXPAND LOOP
1 Separate the Velcro strip.
INSERT HAND
2 Pass your right hand through the loop and grasp the
grip.
ADJUST STRAP LENGTH
3 Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and Power
Zoom Lever. Refasten the Velcro strip.
Recording Start/Stop Button
Viewfinder Adjustment
SELECT OPERATION MODE
1 Set the Power Switch to “CAMERA” (“AUTO” or
3
“PRO.”).
2
POSITION VIEWFINDER
2 Adjust the viewfinder manually for best viewability
180°
(see illustration on left).
ADJUST DIOPTRE
3 Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
1
Set “POWER” to
“CAMERA”
(“AUTO” or “PRO.”)
PAUSE
EN13
Shoulder Strap Attachment
ATTACH STRAP
1 Following the illustration on left, thread the strap
through the top of the eyelet 1, then fold it back and
thread it through the buckle 2. Repeat the procedure
to attach the other end of the strap to the other eyelet
3, making sure the strap is not twisted.
1
4
2
ADJUST LENGTH
2 Adjust as shown in the illustration on left 4.
3
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilise the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
RECORDING Basic Recording
14
EN
LENS COVER Open/Close Ring
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
● Power (੬ pg. 6)
● Recording Mode Setting (੬ pg. 10)
● Tape Length Setting (੬ pg. 10)
● Grip Adjustment (੬ pg. 12)
● Viewfinder Adjustment (੬ pg. 12)
LOAD A CASSETTE
1 First open the LCD monitor to an angle of over 60
degrees.
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
Power Switch
Recording Start/Stop Button
EJECT Switch
Shooting While Watching The Viewfinder
Power lamp
ENTER RECORD-STANDBY MODE
2 Make sure the LCD monitor is closed and locked.
Turn the LENS COVER Open/Close Ring to open the
lens cover, then set the Power Switch to “CAMERA”
(“AUTO” or “PRO.”).
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.
Tally lamp
(lights while recording
is in progress)
START SHOOTING
3 Press the Recording Start/Stop Button.
•“
” appears in the viewfinder while recording is
in progress.
Power Switch Position
According to the Power Switch position you have selected, the following functions are available:
AUTO
(Full Auto mode):
PRO.
(PRO. mode):
POWER OFF:
Allows you to record using
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.
Allows you to switch off the
camcorder.
NO special effects or manual
adjustments. Suitable for
standard recording.
EN15
Tape remaining time indicator
STOP RECORDING
4 Press the Recording Start/Stop Button again to stop
25MIN
MIN
(Now calculating)
recording.
•The camcorder re-enters the Record-Standby mode.
120MIN
119MIN
NOTES:
● When the Power Switch is set to “CAMERA” and the
LCD monitor is opened at an angle of 60 degrees or
more, the LCD monitor switches on and the viewfinder
switches off automatically to save power.
3MIN
● The cassette holder cannot be opened unless a power
supply is attached.
● There may be a delay after you slide EJECT until the
holder opens. Do not use force.
2MIN
(Blinking)
● The tape remaining time is only displayed in the
viewfinder as shown.
1MIN
● The remaining time indicated in the viewfinder is
approximate.
(Blinking)
● The time required to calculate the remaining tape
length, and the accuracy of the calculation, may vary
according to the type of tape used.
0MIN
(Blinking)
● The tape remaining time indicator is correct only if the
correct tape length has been selected (੬ pg. 10).
● “TAPE END” appears when the tape reaches its end, and
the power goes off automatically if left in this condition
for 5 minutes. “TAPE END” also appears when a cassette
whose tape is already at its end is loaded.
Recording Start/Stop Button
● If the Record–Standby mode continues for 5 minutes
without performing Zoom or any other operations, the
camcorder’s power shuts off automatically. Set the
Power Switch to “POWER OFF”, and then back to
“CAMERA” to turn the camcorder on again.
● If the Recording Start/Stop button is pressed after the
Record-Standby mode has continued for over
5 minutes, recording may not start immediately.
● If you are recording on a cassette from the middle (such
as when a tape is removed and re-inserted during
recording), use the Retake function (੬ pg. 19) to find
the end of the last recording so you don’t erase any of it.
● The LENS COVER warning blinks for about 5 seconds
when the camcorder is turned on with the cover closed.
● While shooting, sound is not heard from the speaker.
● To turn the tally lamp off during recording, refer to pgs.
26 and 28.
DISPLAY Button
LCD Monitor/Viewfinder Indications
Press DISPLAY to make the following indications appear/
disappear from the camcorder’s display: cassette warning,
tape remaining time, battery pack remaining power
indicator and tape length indicator (੬ pg. 55).
PRESS DISPLAY BUTTON
1 To turn off the indications, press DISPLAY for more
than 1 second.
Press again for more than 1 second to make the
indications reappear.
NOTE:
Even if the indications are off, the tape remaining time
appears blinking when the tape is near its end, and the
battery pack remaining power indicator appears blinking
when the power is almost gone.
RECORDING Basic Recording (cont.)
16
EN
Shooting While Watching The LCD Monitor
Before the following steps, perform step 1 (੬ pg. 14).
90°
180°
ENTER RECORD–STANDBY MODE
2 Make sure the LCD monitor is fully open. Turn the
LENS COVER Open/Close Ring to open the lens
cover, then set the Power Switch to “CAMERA”
(“AUTO” or “PRO.”).
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears in the LCD
monitor, with the word “PAUSE” superimposed
upon it.
LENS COVER Open/Close Ring
START SHOOTING
3 Tilt the LCD monitor upward/downward for best
viewability (੬ pg. 17) and press the Recording Start/
Stop Button.
•“
” appears in the LCD monitor while recording
is in progress.
STOP RECORDING
4 Press the Recording Start/Stop Button again to stop
recording.
Power Switch
•The camcorder re-enters the Record-Standby mode.
Recording Start/Stop Button
Power lamp
NOTES:
● When you use the LCD monitor outdoors in direct
sunlight, the LCD monitor may be difficult to see. If this
happens, we recommend that you use the viewfinder
(੬ pg. 14).
● To turn the tally lamp off during recording, refer to pgs.
28 and 30.
● For other notes, refer to pg. 15.
Tally lamp
(lights while recording is in progress)
EN17
Journalistic Shooting
In some situations different angles of shooting may be
required for more dramatic results.
OPEN LCD MONITOR
1 Make sure the LCD monitor is fully open.
TILT LCD MONITOR
2 Tilt the LCD monitor in the most convenient
direction.
•The LCD monitor can rotate almost full circle (270°:
90° downward, 180° upward).
Interface Shooting
The person you shoot can view himself/herself in the
LCD monitor, and you can even shoot yourself while
viewing your own image in the LCD monitor.
TILT LCD MONITOR UPWARD
1 Open the LCD monitor and tilt it upward to 180
degrees so that it faces forward.
•When the LCD monitor is tilted upward to an angle
of over approx. 105 degrees, the monitor image is
inverted vertically, and the viewfinder also switches
on.
START RECORDING
2 Point the lens toward the subject (yourself when self-
recording) and start recording.
•During Interface Shooting, the monitor image and
indications do not appear inverted as they would
when viewing a mirror.
Self-recording
NOTE:
The monitored image can be viewed on the LCD monitor
and in the viewfinder.
Brightness Control
You can adjust the brightness of the LCD monitor by
turning the BRIGHT Dial.
ADJUST BRIGHTNESS
1 If you want to brighten the image . . .
Turn the Dial towards “+”.
If you want to darken the image . . .
Turn the Dial towards “–”.
BRIGHT Dial
RECORDING Basic Features
18
EN
FEATURE: Zooming
Zoom in
PURPOSE:
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
Digital circuitry extends the maximum magnification
offered by optical zoom. This system is called Digital
Zoom.
Zoom out
OPERATION:
Zoom In
Push the Power Zoom Lever towards “T”.
Display
Zoom Out
Push the Power Zoom Lever towards “W”.
Ⅲ The harder you push the Power Zoom Lever, the
quicker the zoom action.
Zoom indicator bar
Zoom level indicator
1X
NOTES:
● Focusing may become unstable during Zooming. In
this case, set the zoom while in Record-Standby,
lock the focus by using the manual focus
(੬ pg. 33), then zoom in or out in Record mode.
● The zoom level indicator (5) moves during zoom.
Once the zoom level indicator reaches the top of
the zoom indicator bar, all magnification from that
point is through digital processing.
Approximate zoom ratio
Power Zoom Lever
● When using Digital Zoom, the quality of image may
suffer. To deactivate Digital Zoom, set “D.ZOOM”
to “OFF” in the Menu Screen (੬ pg. 29).
Power Switch
EN19
FEATURE: Quick Review
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Press “ ” and release quickly during the Record–
Standby mode.
Ⅲ Tape is rewound for about 1 second and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
RETAKE (R/F) Button
FEATURE: Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point
for new recording. Pressing “F” forwards the tape
and pressing “R” reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
RECORDING Basic Features (cont.)
20
EN
5 SEC. REC Button
FEATURE: Picture Stabilizer
P.STABILIZER Button
PURPOSE:
To compensate for unstable images caused by camera-
shake, particularly at high magnification.
OPERATION:
1) Press P.STABILIZER. “
”appears.
Ⅲ To switch off the Picture Stabilizer, press
P.STABILIZER. The indicator disappears.
NOTES:
● Accurate stabilisation may not be possible if hand
shake is excessive, or under the following condi-
tions:
•When shooting subjects with vertical or horizontal
stripes.
Display
•When shooting dark or dim subjects.
•When shooting subjects with excessive
backlighting.
•When shooting scenes with movement in various
directions.
PAUSE
5S
•When shooting scenes with low-contrast back-
grounds.
Power Switch
● Switch off the Picture Stabilizer when recording
with the camcorder on a tripod.
5 Sec. Rec mode indicator
Picture stabilizer indicator
● The “
” indicator appears blinking if the
Stabilizer cannot be used.
FEATURE: 5Sec. Rec (5-sec. Recording)
(GR-FXM15 only)
PURPOSE:
To record a scene for 5 seconds, providing quick scene
transitions like those seen in TV programmes.
OPERATION:
1) During Record–Standby, press 5SEC. REC. “
5S”
appears and 5Sec. Rec is reserved.
2) Press the Recording Start/Stop Button. Recording
starts, and after 5-second recording is finished, the
camcorder reenters the Record–Standby mode
automatically.
Ⅲ To cancel the 5Sec. Rec. function, press 5SEC. REC
again so that “
5S” disappears.
NOTE:
Fade/Wipe (੬ pg. 23) cannot be activated by
pressing 5SEC. REC.
EN21
FEATURE: Video Light (GR-FXM45 only)
PURPOSE:
To brighten the scene when natural lighting is too dim.
OPERATION:
1) Set the LIGHT OFF/AUTO/ON Switch as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on the
subject.
ON
: Always keeps the light on as long as the
camcorder is turned on.
LIGHT OFF/AUTO/ON Switch
Ⅲ The video light can only be used with the
camcorder’s power on.
Ⅲ It is recommended to set the white balance
(੬ pg. 34) to
when you use the video light.
Ⅲ When not using the video light, turn it off to save
battery power.
DANGER
NOTES:
Ⅲ The video light can become extremely
hot. Do not touch it either while in
operation or soon after turning it off,
otherwise serious injury may result.
Ⅲ Do not place the camcorder into the
carrying case immediately after using the
video light, since it remains extremely
hot for some time.
● Even if the battery indicator (
) does not blink if
the battery pack’s charge is low, the camcorder may
turn off automatically when you turn on the video
light, or when you start recording with the video light
turned on.
● When the LIGHT OFF/AUTO/ON Switch is set to
“AUTO”:
Ⅲ When operating, keep a distance of
about 30 cm. between the video light
and people or objects.
Ⅲ Do not use near flammable or explosive
materials.
Ⅲ It is recommended that you consult your
nearest JVC dealer for replacing the video
light.
•Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using the
LIGHT OFF/AUTO/ON switch.
•While the “Sports” or “High Speed Shutter” mode
(੬ pg. 25) is engaged, the light is likely to stay on.
•While the “Twilight” mode (੬ pg. 25) is engaged,
the light will not activate.
RECORDING Advanced Features
22
EN
SNAPSHOT Button
Snapshot (GR-FXM45 only)
Use your camcorder like a regular camera and take a
snapshot, or several of them in succession.
SELECT OPERATION MODE
1 Set the Power Switch to “AUTO” or “PRO.”.
TAKE SNAPSHOT
2 Press SNAPSHOT.
If you press during Record-Standby . . .
.... a still image will be recorded for approx. 6 seconds,
then the camcorder re-enters the Record-Standby
mode.
Power Switch
If you press during Recording . . .
.... a still image will be recorded for approx. 6 seconds,
then the normal recording resumes.
SNAPSHOT
NOTE:
After SNAPSHOT is pressed, there is a momentary camera
shutter-type blackout together with the sound effect of a
shutter closing, which is recorded together with the image.
Display
RECORDING Advanced Features
EN23
[Ex.: Fader]
Fade/Wipe
Fade in
These effects let you make pro-style scene transitions.
Fade- or wipe-in works at recording start, and fade- or
wipe-out works at recording end.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
Fade out
ENGAGE FADE- OR WIPE-STANDBY
2 MODE
Display
Press EFFECT to cycle through the modes as shown at
left. Once the desired mode appears, it is selected
and reserved.
After 2 sec.
MOSAIC
•The selected mode’s name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains.
START OR END RECORDING
3 Press the Recording Start/Stop Button to activate fade-
in/out or wipe-in/out.
TO CANCEL FADE- OR WIPE-STANDBY
4 MODE
FADER
Press EFFECT repeatedly until “OFF” appears.
MOSAIC
SHUTTER
SLIDE
•“OFF” is displayed for approx. 2 seconds and the
fade/wipe standby mode is canceled.
FADER
OFF
(No indication)
OFF
Fades in/out to a black screen.
MOSAIC (Fader)
Gradually turns/returns the picture into/from a mosaic
pattern.
SHUTTER (Wipe)
A black screen moves in from the top and bottom, closing
over the image like a shutter, or a new image pushes open
the black screen vertically from the centre.
SLIDE (Wipe)
A black screen moves in from the left to gradually cover
the image, or a new image moves in from right to left.
Power
Switch
EFFECT Button
NOTES:
● Pressing and holding the Recording Start/Stop Button
allows you to vary the length for the image during fade
in/out or wipe in/out.
● The screen becomes slightly reddish when the Fade/
Wipe is used with Sepia (੬ pg. 25).
● With the Electronic fog filter mode (੬ pg. 25) engaged,
the image fades in/out to a white screen.
Recording Start/Stop
Button
RECORDING Advanced Features (cont.)
24
EN
Display
SEPIA
Programme AE With Special Effects
After 2 sec.
All you have to do to access any of the variety of shooting
:
effects is press P.AE.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
SELECT MODE
2 Press P.AE to cycle through the modes as shown on
the left.
•The selected mode’s name and its indication are
displayed for approx. 2 seconds. Then the name
disappears, and only the indication remains. The
mode is activated.
SEPIA
SPORTS
NOTES:
:
ND ND EFFECT
ND
FG
● Only one mode can be engaged at a time.
● The screen becomes slightly reddish when the Fade/
Wipe (੬ pg. 23) is used in the Sepia mode.
● The screen becomes slightly dark in the High Speed
Shutter mode. Use in well-lit situations.
:
FG FOG
TWILIGHT
● In the “High Speed Shutter” or “Sports” modes, picture
colour may be adversely affected if the subject is lit by
alternating discharge-type light sources such as
flourescent or mercury-vapour lights.
S1/2000
NEGA/POSI
OFF
OFF
(No indication)
P.AE Button
Power Switch
EN25
Display
Mode
Display
Mode
1/2000 sec.
High Speed Shutter
Sepia
S1/2000
SEPIA
Sepia
High-Speed Shutter (1/2000s.)
The scene being shot is recorded in sepia-tinted
(reddish-brown) monochrome, giving the effect of
an older movie. Use together with Wide (੬ pg. 29)
for the authentic look of a classic Hollywood
movie.
Captures faster action than Sports mode.
Nega/Posi
NEGA POSI
Nega/Posi (Negative/Positive)
The colours of a picture are reversed.
Sports
SPORTS
Sports
High shutter speed clearly captures fast-moving
action.
NEGA POSI mode
ND Effect
:
ND ND EFFECT
ND Effect
A black mist darkens the picture, as when an ND
filter is used. Helps to counter the effects of glare on
the subject.
Electronic
Fog Filter
:
FG FOG
Electronic Fog Filter
Makes the picture look misty white, as when an
external fog filter is attached to the lens. Softens the
image and gives it a “fantasy” look.
Twilight
TWILIGHT
Twilight
Dusk, twilight scenery, fireworks, etc., look more
natural and dramatic. The following happens when
Twilight mode is selected:
•Auto gain control is turned off.
•White Balance is set to “
” (FINE day mode),
but can also be manually changed to another
mode (੬ pg. 34).
•Auto Focus becomes available only in the range of
10 m to infinity. To focus when the subject-to-
camera distance is less than 10 m, use manual
focusing (੬ pg. 33).
RECORDING Advanced Features (cont.)
26
EN
Date/Time Insert
The feature allows you to display the date and time on the
LCD monitor, in the viewfinder, or on a connected colour
monitor, as well as to record them manually or automati-
cally.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “DATE/TIME DISP.” MENU
3 Move the highlight bar to “DATE/TIME DISP.” by
rotating the Select Dial while in Record-Standby.
Then press it to display the DATE/TIME DISP. Menu.
Select Dial
Display
Power Switch
Menu Screen
SELECT THE DESIRED MODE
4 Move the highlight bar to the desired mode by
rotating the Select Dial, then press it. The desired
mode is activated.
FOCUS
EXPOSURE
WIDE
AUTO
AUTO
OFF
•You should have already performed the Date/Time
Setting procedure (੬ pg. 9). If you haven’t, do so
first.
S.LX
MAX
TITLE
DATE TIME DISP.
CLOSE MENU SCREEN
4
RETURN
5 The Menu Screen reappears with the highlight bar on
“RETURN”. Then press the Select Dial to close the
Menu Screen.
DATE TIME DISP.
DATE/TIME DISP.
Menu
AUTO DATE
DATE
NOTES:
DISPLAY
TIME
DATE&TIME
OFF
● The selected display can be recorded.
● If you do not want to record the display, select the OFF
mode before shooting.
EXIT
AUTO DATE
● Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
FOCUS
EXPOSURE
WIDE
AUTO
AUTO
OFF
S.LX
MAX
•After changing the date.
TITLE
DATE TIME DISP.
•After loading a cassette.
•After Auto Date Record mode is selected by rotating
the Select Dial.
4RETURN
● In this mode, the date is replaced after 5 seconds with
“AUTO DATE” but this is not recorded.
25. 12. 99
AUTO DATE
25 . 12 . 99
(DATE)
22 : 50 : 00
(TIME)
25 . 12 . 99
22 : 50 : 00
(DATE&TIME)
OFF
(No indication)
EN27
Instant Titles
The camcorder has eight preset titles in memory. You can
superimpose one of them over a picture as shown in the
illustration on left.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “TITLE” MENU
3 Move the highlight bar to “TITLE” by rotating the
Select Dial while in Record-Standby. Then press it to
display the TITLE Menu.
SELECT THE DESIRED MODE
4 Move the highlight bar to the desired mode by
rotating the Select Dial, then press it. The desired
mode is activated.
Select Dial
Display
Power Switch
Menu Screen
•If you wish to make the title indication disappear,
select “OFF”.
CLOSE MENU SCREEN
FOCUS
AUTO
5 The Menu Screen reappears with the highlight bar on
EXPOSURE
WIDE
AUTO
OFF
“RETURN”. Then press the Select Dial to close the
Menu Screen.
S.LX
TITLE
MAX
DATE TIME DISP.
4RETURN
TITLE
TITLE Menu
OFF
HAPPY BIRTHDAY
HAPPY HOLIDAYS
OUR FAMILY
MOVIE STAR
PARTY TIME
MERRY CHRISTMAS
WEDDING DAY
CONGRATULATIONS
EXIT
FOCUS
EXPOSURE
WIDE
AUTO
AUTO
OFF
S.LX
MAX
TITLE
DATE TIME DISP.
4RETURN
CONGRATULATIONS
RECORDING Advanced Features (cont.)
28
EN
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
Select Dial
SELECT OPERATION MODE
1 Turn the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Menu access depends on the function you select.
If you select the functions from the “Menu Screen
Available Using The Select Dial” described on
pg. 29 . . .
MENU Button
Menu Screen 1
Display
(ex. Menu Screen available
using the MENU Button)
.... press the Select Dial. The Menu Screen appears.
If you select the functions from the “Menu Screen
Available Using The MENU Button” described on
pg. 29 and 30 . . .
4
NEXT
M.W.B.
AUTO
ON
.... press MENU. The Menu Screen appears.
D . ZOOM
TELE MACRO OFF
DATE TIME
SELECT FUNCTION
TAPE LENGTH T45
3 Rotate the Select Dial to place the highlight bar on
the desired function.
4
RETURN
•To go from Menu Screen 1 to Menu Screen 2, rotate the
Select Dial to “NEXT” and press it. To go back to Menu
Screen 1 from Menu Screen 2, rotate the Select Dial to
“BACK”, and press it.
Menu Screen 2
4
BACK
REC. TIME
INT. TIME
OFF
OFF
•If the setting you want cannot be found in the Menu
Screen, place the highlight bar on “RETURN”, then go
to step 6.
TALLY LAMP ON
JLIP ID NO
06
DEMO MODE OFF
MAKE SETTING
4 Press the Select Dial. The setting procedure depends
4
RETURN
on the function you select.
If you select “FOCUS”, “EXPOSURE”, “TITLE”,
“DATE/TIME DISP.” or “DATE/ TIME” . . .
.... see respective pages (FOCUS: ੬ pg. 32, 33,
EXPOSURE: ੬ pg. 31, TITLE: ੬ pg. 27,
DATE/TIME DISP.: ੬ pg. 26, DATE/TIME: ੬ pg. 9).
If you select “WIDE”, “D.ZOOM”, “TELE MACRO”
or “DEMO MODE” . . .
.... the selected function’s parameter starts blinking.
Rotate the Select Dial until the desired parameter
appears. Go to step 5.
REC TIME
Setting Menu
(ex. REC TIME)
OFF
1/4S
1/2S
1 S
5 S
EXIT
If you select “JLIP ID NO.” . . .
4
BACK
REC. TIME
INT. TIME
1S
.... press the Select Dial so that the number blinks, then
rotate it until the desired number appears, and press
it. Then rotate the Select Dial to move the highlight
bar to “EXIT”.
OFF
TALLY LAMP ON
JLIP ID NO
06
DEMO MODE OFF
If you select any other functions . . .
.... rotate the Select Dial to move the highlight bar to the
desired setting.
4RETURN
• If you decide you want to return to the previous
setting, rotate the Select Dial to move the highlight
bar to “EXIT”.
Normal Screen
END SETTING
5 Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”.
NOTE:
No menu functions except “FOCUS” and
“EXPOSURE” are available while in the Record
mode.
CLOSE MENU SCREEN
6 Press the Select Dial. The normal screen reappears.
EN29
MENU SCREEN EXPLANATIONS
Menu Screen Available Using The Select Dial
Adjusts focus automatically.
FOCUS
AUTO
MANU
AUTO
MANU
OFF
Allows you to adjust focus manually (੬ pg. 32, 33).
Adjusts exposure automatically.
EXPOSURE
WIDE
Allows you to adjust exposure manually (੬ pg. 31).
Does not display black bars.
Allows you to record black bars at the top and bottom of the
screen to produce a cinema-like “wide-screen” effect.
If a snapshot (GR-FXM45 only, ੬ pg. 22) is taken while the
camcorder is in the WIDE mode, the snapshot image is recorded
using NORMAL mode without the black bars at the top and
bottom of the screen.
ON
S.LX
To record a subject in a darkly lit environment, when it is more
convenient to shoot the subject with a brighter image even if the
picture becomes slightly coarse.
MAX
To record a subject in a dimly lit environment, when it is more
convenient to shoot with a less coarse picture although the
subject becomes slightly dark.
NORMAL
OFF
Allows you to shoot dark scenes with no picture brightness
adjustment.
Allows you to superimpose one of eight preset titles (੬ pg. 27).
TITLE
Makes the date/time settings appear in the camcorder or on a connected monitor
(੬ pg. 26).
DATE/TIME DISP.
Menu Screen Available Using The MENU Button
This Menu Screen cannot be accessed while recording.
AUTO
: FINE
This camcorder’s Automatic Colour Temperature system senses
the colour temperature of the ambient lighting for automatic
white balance adjustment. However, precise colour adjustment
is not possible under the following conditions:
• When an object is in various shades of the same colour.
• When a predominantly red or brown object is being shot outdoors.
M.W.B.
: CLOUD
: HALOGEN
In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (੬ pg. 34, 35).
MWB
ON
Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 16 times (the optical
zoom limit), to a maximum of 320 times (GR-FXM45) / 50 times
(GR-FXM15) digital magnification.
D. ZOOM
Digital Zoom is not available. Only optical zoom (maximum
16x magnification) can function. When set to “OFF” during
Digital Zoom, zoom magnification changes to 16x.
OFF
OFF
ON
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance of
more than 1m to the subject, the lens is out of focus at the
maximum telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx. 60 cm.
TELE MACRO
•Depending on the zoom position, the lens may go out of focus.
: Factory-preset
CONTINUED ON NEXT PAGE
RECORDING Advanced Features (cont.)
30
EN
Menu Screen Available Using The MENU Button (cont.)
DATE/TIME
Allows you to set the current date and time (੬ pg. 9).
TAPE LENGTH
Allows you to set the tape length depending on the tape used (੬ pg. 10).
This feature allows you to set the parameters for Animation and Time-Lapse
recording (੬ pg. 37).
REC TIME
This feature allows you to set the parameters for Self-Timer (੬ pg. 36) and Time-
Lapse recording (੬ pg. 37).
INT. TIME
OFF
ON
The tally lamp remains off at all times.
TALLY LAMP
The tally lamp comes on to signal the start of recording.
This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
JLIP ID NO.
Automatic demonstration will not take place.
OFF
ON
DEMO MODE
Demonstrates certain functions such as Fade/Wipe, etc. When
“DEMO MODE” is set to “ON” and the Menu Screen is closed,
the demonstration starts.
NOTES:
●When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
●By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
“DEMO MODE” is set to “OFF” automatically.
●During the demonstration, all functions except zoom are
disabled.
: Factory-preset
EN31
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “EXPOSURE” MENU
3 Rotate the Select Dial to move the highlight bar to
“EXPOSURE” and press it.
ACCESS MANUAL EXPOSURE
4 Rotate the Select Dial to move the highlight bar to
“MANU”, then press it. “00” (exposure control level
counter) appears.
Select Dial
Display
Power Switch
Menu Screen
ADJUST EXPOSURE
5 To brighten the image . . .
.... rotate the Select Dial upward. The exposure
control level counter increases (maximum +06).
FOCUS
AUTO
Go to step 6.
To darken the image . . .
.... rotate the Select Dial downward. The exposure
control level counter decreases (maximum –06).
EXPOSURE
WIDE
AUTO
OFF
S.LX
TITLE
MAX
DATE TIME DISP.
Go to step 6.
4RETURN
END ADJUSTMENT OF EXPOSURE
6 Press the Select Dial. The Menu Screen reappears
EXPOSURE
EXPOSURE Menu
with the highlight bar on “RETURN”.
AUTO
MANU
CLOSE MENU SCREEN
7 Press the Select Dial. The Menu Screen disappears
and the exposure control level counter reappers to
indicate the exposure is adjusted.
EXIT
NOTES:
Manual Exposure
Screen
● To return to the factory setting, select “AUTO” in step 4.
● To re-adjust exposure, repeat the procedure from step 2.
00
Exposure control
level counter
To brighten the image
+
06
–06
To darken the image
RECORDING Advanced Features (cont.)
32
EN
Focus detection zone
Focusing
AUTO FOCUS
The camcorder’s Full Range AF system offers continuous
shooting ability from close-up to infinity. However, correct
focus may not be obtainable in the situations listed below
(in these cases use manual focusing):
•When two subjects overlap in the same scene.
•When illumination is low.*
•When the subject has no contrast (difference in bright-
ness and darkness), such as a flat, one-colour wall, or a
clear, blue sky.*
•When a dark object is barely visible in the viewfinder.*
•When the scene contains minute patterns or identical
patterns that are regularly repeated.
•When the scene is affected by sunbeams or light
reflecting off the surface of a body of water.
•When shooting a scene with a high-contrast background.
* The low-contrast warning “
” appears.
NOTES:
● If the lens is smeared or blurred, accurate focusing is not
possible. Keep the lens clean, wiping with a piece of soft
cloth if it gets dirty. When condensation occurs, wipe
with a soft cloth or wait for it to dry naturally.
● When shooting a subject close to the lens, zoom out first
(੬ pg. 18). If zoomed in in the auto focus mode, the
camcorder could automatically zoom out depending on
the distance between the camcorder and the subject.
When Tele Macro (੬ pg. 29) is activated, the
camcorder will not zoom out automatically.
EN33
MANUAL FOCUS
NOTE:
You should already have made the necessary viewfinder
adjustments (੬ pg. 12). If you haven’t, do so before
continuing.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
ACCESS MENU SCREEN
2 Press the Select Dial to display the Menu Screen.
ACCESS “FOCUS” MENU
3 Move the highlight bar to “FOCUS” by rotating the
Select Dial, then press it.
ACCESS MANUAL FOCUS
4 Rotate the Select Dial to move the highlight bar to
“MANU”, then press it. “ ” and “ ” appear. The
focus is locked at this point.
Select Dial
Display
Power Switch
Menu Screen
ADJUST FOCUS
5 To farther subject . . .
.... rotate the Select Dial upward. “ ” appears and
FOCUS
AUTO
blinks.
EXPOSURE
WIDE
AUTO
OFF
Go to step 6.
S.LX
TITLE
MAX
To nearer subject . . .
DATE TIME DISP.
.... rotate the Select Dial downward. “ ” appears
and blinks.
4RETURN
Go to step 6.
FOCUS
FOCUS Menu
END ADJUSTMENT OF FOCUS
AUTO
MANU
6 Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”.
CLOSE MENU SCREEN
7 Press the Select Dial. The Menu Screen disppears and
EXIT
“
” reappears to indicate the focus is locked.
NOTES:
Manual Focus Screen
● To return to Auto Focus, select “AUTO” in step 4.
● To re-adjust Manual Focus, repeat the procedure from
step 2.
● Be sure to focus the lens in the maximum telephoto
position when you use the Manual Focus mode. If you
focus in on a certain subject in the wide-angle position,
sharply focused images cannot be obtained when
zoomed in because the depth-of-field is reduced at
longer focal lengths.
● When the focus level cannot be adjusted any farther or
closer, “ ” or “ ” will blink.
RECORDING Advanced Features (cont.)
34
EN
White Balance Adjustment
A term that refers to the correctness of colour reproduction
under various lighting. If the white balance is correct, all
other colours will be accurately reproduced.
The white balance is usually adjusted automatically.
However, the more advanced camcorder operator would
prefer to control this function manually and achieve a
more professional colour/tint reproduction.
SELECT OPERATION MODE
1 Set the Power Switch to “PRO.”.
MENU Button
ACCESS MENU SCREEN
2 Press MENU. The Menu Screen appears.
ACCESS WHITE BALANCE
3 ADJUSTMENT
Move the highlight bar to “M.W.B.” by rotating the
Select Dial, then press it. The Menu Screen disap-
pears and the “M.W.B.” Menu appears.
Select Dial
Display
Power Switch
Menu Screen
SET FUNCTION PARAMETERS
4 Move the highlight bar to the required white balance
by rotating the Select Dial.
“AUTO”
4
NEXT
M.W.B.
AUTO
ON
The white balance is adjusted automatically. This is
the factory preset position.
D . ZOOM
TELE MACRO OFF
DATE TIME
“
: FINE”
When shooting outdoors on a sunny day.
: CLOUD”
When shooting outdoors on a cloudy day.
: HALOGEN”
TAPE LENGTH T45
“
4
RETURN
“
M.W.B.
M.W.B. Menu
When using a video light or other similar type of
lighting.
AUTO
:
:
:
FINE
CLOUD
“MWB”
HALOGEN
MWB
When shooting with the white balance already
having been set on the subject (To set “MWB”,
੬ pg. 35).
EXIT
CLOSE MENU SCREEN
5 Press the Select Dial.
The Menu Screen reappears with the highlight bar on
“RETURN”. Press the Select Dial again to close the
Menu Screen.
To Return To Automatic White Balance . . .
.... select “AUTO” in step 4. Or set the Power Switch to
“AUTO”.
NOTE:
White balance cannot be used when Sepia (੬ pg. 25) is
activated.
EN35
Manual White Balance Operation
White paper
If the camera is operating in PRO. mode, perform a
Manual White Balance when shooting under various types
of lighting.
SELECT OPERATION MODE
1 Follow steps 1 through 4 of the white balance
adjustment (੬ pg. 34), and select “MWB”.
SET MANUAL WHITE BALANCE
2 Hold a sheet of plain white paper in front of the
subject. Adjust zoom or position yourself so that the
white paper fills the screen.
ENTER SETTING
3 Press the Select Dial until “MWB” begins blinking.
•When the setting is completed, “MWB” stops
blinking, and the Menu Screen reappears with the
highlight bar on “RETURN”.
CLOSE MENU SCREEN
4 Press the Select Dial again to close the Menu Screen.
Select Dial
Display
Power Switch
To Change The Tint For Recording . . .
.... in step 2, substitute coloured paper for white. The
white balance is adjusted based on the colour,
changing the tint. Red paper — deeper green; blue
paper — orange; yellow paper — deeper purple.
Menu Screen
4
NEXT
M.W.B.
AUTO
ON
D . ZOOM
TELE MACRO OFF
DATE TIME
TAPE LENGTH T45
NOTES:
● In step 2, it may be difficult to focus on the white paper
in some circumstances. In such a case, adjust focus
manually (੬ pg. 33).
4RETURN
● A subject can be shot under various types of lighting
conditions indoors (natural, flourescent, candlelight,
etc.). Because the colour temperature is different
depending on the light source, the tint of the subject will
differ depending on the white balance settings. Use this
function for a more natural result.
M.W.B.
M.W.B. Menu
AUTO
:
:
:
FINE
CLOUD
HALOGEN
MWB
● Once you adjust white balance during Manual White
Balance operation, the setting is retained even if the
power is turned off or the battery removed.
EXIT
RECORDING Advanced Features (cont.)
36
EN
Self-Timer
You can set the delay between pressing the Recording
Start/Stop button and the actual start of recording. If you
secure the camcorder, you (or whoever is operating the
camcorder) can enter the scene before recording starts.
NOTE:
Make sure the Power Switch is set to “PRO.” and the
camcorder is in the Record-Standby mode before
performing the following steps.
ACCESS MENU SCREEN
MENU Button
1 Press MENU.
ACCESS “INT. TIME” MENU
2 Rotate the Select Dial to move the highlight bar to
“NEXT” in Menu Screen 1 and press it to display
Menu Screen 2. Then, move the highlight bar to “INT.
TIME” and press it.
Select Dial
Display
Recording Start/Stop
Button
SET INTERVAL TIME
3 Rotate the Select Dial to move the highlight bar to the
desired time, then press it. The Menu Screen
reappears with the highlight bar on “RETURN”.
Menu Screen 1
4
NEXT
M.W.B.
AUTO
ON
CLOSE MENU SCREEN
D . ZOOM
TELE MACRO OFF
DATE TIME
4 Press the Select Dial.
TAPE LENGTH T45
START DELAYED RECORDING
5 Press the Recording Start/Stop Button. When the
4
RETURN
selected time has elapsed, recording begins auto-
matically.
Menu Screen 2
4
BACK
To Cancel Self-Timer . . .
REC. TIME
INT. TIME
OFF
OFF
.... Before the recording begins, press the Recording Start/
TALLY LAMP ON
JLIP ID NO
06
Stop Button to display “
TIME” in the Menu Screen to “OFF”.
”, then set “INT.
DEMO MODE OFF
4RETURN
INT. TIME
REC TIME
OFF
OFF
1 4S
1 2S
1 S
15S
30S
1 MIN
5 MIN
5 S
EXIT
EXIT
INT. TIME Menu
REC TIME Menu
INT. TIME indicator
REC TIME indicator
15S
1S
INT. TIME and REC TIME indications on the normal
screen
EN37
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time.
Animation
Time-Lapse
You can give stationary scenes or objects an illusion
of movement. This function allows you to shoot a
series of pictures, each slightly different, of the same
object for a brief period of time.
NOTE:
NOTE:
Before performing the following steps, make sure
that:
Before performing the following steps, make sure
that:
● The Power Switch is set to “PRO.”.
● The camcorder is in the Record-Standby mode.
● The recording mode is set to “SP”.
● The Power Switch is set to “PRO.”.
● The camcorder is in the Record-Standby mode.
● The recording mode is set to “SP”.
ACCESS MENU SCREEN
ACCESS MENU SCREEN
1 Press MENU.
1 Press MENU.
SET RECORDING TIME
SET INTERVAL BETWEEN
2 Rotate the Select Dial to move the highlight bar 2 RECORDINGS
to “NEXT” in Menu Screen 1 and press it to
display Menu Screen 2. Then, move the
Rotate the Select Dial to move the highlight bar
to “NEXT” in Menu Screen 1 and press it to
display Menu Screen 2. Then, move the
highlight bar to “INT. TIME” and press it. The
INT. TIME Menu appears. Rotate the Select Dial
to move the highlight bar to the desired time,
then press it. The Menu Screen reappears.
highlight bar to “REC TIME” and press it. The
REC TIME Menu appears. Rotate the Select Dial
to move the highlight bar to the desired time,
then press it. The Menu Screen reappears with
the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
SET RECORDING TIME
3 Rotate the Select Dial to move the highlight bar
START RECORDING
3 Press the Recording Start/Stop Button after
to “REC TIME”, then press it. The REC TIME
Menu appears. Rotate the Select Dial to move
the highlight bar to the desired time, then press
it. The Menu Screen reappears with the
highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
focusing on the subject. The recording stops
automatically after the selected period of time.
ASSEMBLE SERIES OF PICTURES
4 Repeat step 3 for the desired number of
pictures.
START TIME-LAPSE RECORDING
RELEASE ANIMATION MODE
4 Press the Recording Start/Stop Button. Recording
5 Set “REC TIME” in the Menu screen to “OFF”.
and intervals alternate automatically.
RELEASE TIME-LAPSE MODE
NOTES:
5 To release when “
” is displayed, set
● For best results, make sure the camcorder is
secured when shooting in Animation or Time-
Lapse mode.
“REC TIME” and “INT. TIME” in the Menu
Screen to “OFF”. To release when
“
” and “
press the Recording Start/Stop Button to display
”, then set “REC TIME” and “INT.
TIME” in the Menu Screen to “OFF”.
” are not displayed,
● Fade- or wipe-in/out cannot be performed during
Animation or Time-Lapse shooting.
“
● Before performing other operations following
Animation or Time-Lapse recording, make sure
the Animation or Time-Lapse mode is deactivated.
● Self-Timer, Animation and Time-Lapse are
canceled when the power is shut off or when the
cassette is ejected.
PLAYBACK Basic Playback
38
EN
REW (2) Button
LOAD A CASSETTE
1 First open the LCD monitor to an angle of over 60
FF (3) Button
degrees. Slide EJECT to open the cassette holder, then
insert the cassette with the label facing out. Press
PUSH to ensure the holder is closed and locked.
PLAY/PAUSE (4/6)
Button
SELECT MODE
2 Make sure the LCD monitor is fully open, then set the
STOP (5) Button
Power Switch to “PLAY”. The power lamp lights.
PLAY BACK
3 Press PLAY/PAUSE (
4/6). The playback picture
appears.
STOP PLAYBACK
4 Press STOP (5).
Rewind or Fast-Forward the tape
Press REW (2) to rewind, or FF (3) to fast-forward the
tape during Stop mode.
EJECT Switch
NOTES:
Power lamp
● The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to “POWER OFF”, then to “PLAY”.
● When the Power Switch is set to “PLAY” and the LCD
monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save power.
Power Switch
● The playback picture can also be viewed in the
viewfinder (with the LCD monitor shut) or on a
connected TV (੬ pg. 42, 43). Camcorder operation is
the same as described in this section.
LCD Monitor in Retracted Position
● You can also view the playback picture on the LCD
monitor with it flipped over and retracted.
● If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
Battery pack remaining power indicator
Tape counter
Recording mode indicator
SP
Tape running
indicator
:
:
M 1 23 45
4
:Playback
3
:Fast-Forward/
Forward Search
:Rewind/Reverse
Search
2
6
:Still Playback
LCD monitor/viewfinder
indications
PLAYBACK Features
EN39
Power Zoom Lever
Adjust the brightness of the LCD monitor
To brighten the image, turn the BRIGHT Dial towards “+”.
To darken the image, turn the Dial towards “–”.
Speaker Volume Control
You can adjust the speaker volume by pushing the Power
Zoom Lever.
ADJUST VOLUME
1 If you want to turn up the volume . . .
.... push the Power Zoom Lever towards “T”.
If you want to turn down the volume . . .
.... push the Power Zoom Lever towards “W”.
BRIGHT Dial
Tracking
This function can be used to eliminate noise bars that
appear on-screen during playback. Initial setting is Auto
Tracking. Manual Tracking is also available.
Speaker
P.AE Button
EFFECT Button
ACTIVATE MANUAL TRACKING
1 Press P.AE and EFFECT simultaneously. Then, press
P.AE or EFFECT as many times as necessary until the
Display
noise bars disappear.
•To return to Auto Tracking, press P.AE and EFFECT
simultaneously. “AT” blinks. When Auto Tracking
finishes, the indication disappears.
NOTES:
● When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
BRIGHT
BRIGHT
● Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
VOLUME
PLAYBACK Features (cont.)
40
EN
Power Switch
FEATURE: Still Playback
PURPOSE:
To pause during playback.
OPERATION:
1) Press PLAY/PAUSE (4/6) during playback.
2) To resume normal playback, press PLAY/PAUSE
(4/6) again.
NOTE:
Noise bars appear and pictures may become
monochrome during Still Playback. This is normal.
FEATURE: Shuttle Search
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press FF (3) to search forward or press REW (2
to reverse during playback.
)
REW (2) Button
FF (3) Button
2) To resume normal playback, press PLAY/PAUSE
(4/6).
NOTES:
PLAY/PAUSE (4/6)
Button
● During playback, press and hold REW (2) or
FF (3). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
STOP (5) Button
● Noise bars appear and pictures may become
monochrome or darken during Shuttle Search. This
is normal.
COUNTER R/M Button
FEATURE: Counter Memory Function
PURPOSE:
To make it easier to locate a specific tape segment.
OPERATION:
1) Press COUNTER R/M and hold for more than 1
second. The counter resets to “0:00:00”.
2) Press COUNTER R/M for less than 1 second. “M”
appears.
3) After recording or playback, press STOP (5), then
REW (2). The tape automatically stops at or close
to 0:00:00.
4) Press PLAY/PAUSE (4/6) to start playback.
NOTES:
● The counter memory functions in the Fast-Forward
and Rewind modes.
● To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second so that “M”
disappears.
PLAYBACK Using The Cassette Adapter
Cassette Adapter
EN41
Use this to play back a VHS-C video cassette recorded
with this camcorder on a VHS VCR. It is fully compatible
with any VHS video cassette recorder. The C-P7U adapter
is battery powered and automatically performs tape
loading and unloading.
INSERT BATTERY
1 Slide the battery cover up to remove it, and install
one “R6 (AA)” size battery as shown in the
illustration on left, then reattach the cover.
VCR
INSERT CASSETTE IN ADAPTER
2 Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
Compartment door
PLAY BACK ON CONNECTED VCR
3 Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM ADAPTER
4 Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration on left, and push
up and remove the cassette.
Sliding latch
NOTES:
Compact video cassette
● During tape loading and unloading, do not touch the
reels for safety and tape protection.
● During special-effect playback (slow motion, still frame,
etc.), the picture may vibrate or noise bars may appear
on the screen.
Reels
● To record on a VCR using a compact cassette and the
adapter, cover the adapter’s recording safety hole with
adhesive tape.
Recording safety hole
PLAYBACK Basic Connections And Tape Dubbing
These are some basic types of connections. When making connections, refer also to your VCR and TV
instruction manuals.
42
EN
Basic Connections
Use the provided Video and Audio cables.
TV
To AUDIO and
VIDEO IN
connectors
To Video
Output
Video cable
(provided)
To TV or
VCR
Audio cable
(provided)
To Audio
Output
VCR
Connector cover*
Connection For Tape Dubbing
Use the provided Video and Audio cables.
Power Switch
PLAY/PAUSE
4/6) Button
(
TV
To AUDIO and
VIDEO IN
connectors
To Video
Output
Video cable
(provided)
To TV or
VCR
Audio cable
(provided)
To Audio
Output
VCR
(Recording deck)
Connector cover*
* When connecting the cables, open this cover.
EN43
Basic Connections
Tape Dubbing
CONFIRM POWER-OFF STATUS
CONNECT EQUIPMENT
1 Make sure the camcorder’s power is off.
1 Following the illustration on pg. 42, connect the
camcorder and the VCR.
CONNECT CAMCORDER TO TV OR
2 VCR
PREPARE FOR DUBBING
2 Set the camcorder’s Power Switch to “PLAY”,
Pull out the connector cover and open it.
turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the
VCR.
Connect as shown in the illustration (੬ pg. 42).
If using a VCR . . . go to step 3.
If not . . . go to step 4.
SELECT VCR MODE
3 Engage the VCR’s AUX and Record-Pause
CONNECT VCR OUTPUT TO TV
3 INPUT
modes.
Refer to your VCR’s instruction manual.
FIND EDIT-IN POINT
4 Engage the camcorder’s Play mode to find a spot
SUPPLY POWER
4 Turn on the camcorder, the VCR and the TV.
just before the edit-in point. Once it is reached,
press PLAY/PAUSE (4/6) on the camcorder.
SELECT MODE
5 Set the VCR to its AUX input mode, and set the
START EDITING
5 Press PLAY/PAUSE (
TV to its VIDEO mode.
4/6) on the camcorder and
engage the VCR’s Record mode.
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack (੬ pg. 7).
STOP EDITING TEMPORARILY
6 Engage the VCR’s Record-Pause mode and press
PLAY/PAUSE (4/6) on the camcorder.
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder’s Power Switch to “CAMERA” (“AUTO”
or “PRO.”), then set your TV to the appropriate
input mode.
EDIT MORE SEGMENTS
7 Repeat steps 4 through 6 for additional editing,
then stop the VCR and camcorder when
finished.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
USING THE REMOTE CONTROL UNIT
44
EN
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. The RM-V700U remote
control unit makes additional recording functions
A
B
1
2
2
possible.
3
3
1
1
Release tab
Installing The Battery
Lock hole
1
The remote control uses one lithium battery
(CR2025).
1
2
PULL OUT BATTERY HOLDER
1 Pull out the battery holder according to the type
0
of remote control unit you have.
3
5
: Pull out the battery holder while sliding
the lock hole.
: Pinch the release tab and pull out the
battery holder.
!
4
@
6
8
#
%
7
9
$
^
INSERT BATTERY IN HOLDER
2 Insert the battery in the holder, and be sure to
have the “+” mark visible.
&
RE-INSERT HOLDER
3 Slide the holder back in until you hear a click.
RM-V700U
(provided with GR-FXM45,
optional for GR-FXM15)
•Read the caution concerning lithium batteries
(੬ pg. 2).
Functions
Buttons
With the camcorder’s Power Switch set
to “CAMERA”, “AUTO” or “PRO.”.
With the camcorder’s Power Switch set
to “PLAY”.
1 PAUSE IN Connector
—
੬ pg. 47
2 Infrared beam
transmitting window
Transmits the beam signal.
3 MBR SET Button
4 INT. TIME Button
5 REC TIME Button
6 FF Button
—
੬ pg. 46
Self-Timer/Time-Lapse (੬ pg. 45)
Animation/Time-Lapse (੬ pg. 45)
Retake (forward) (੬ pg. 19)
—
—
Fast-Forward, Forward Shuttle Search
(੬ pg. 38, 40)
7 REW Button
Retake (rewind)/Quick Review (
੬
pg. 19) Rewind, Reverse Shuttle Search
(੬ pg. 38, 40)
8 PAUSE Button
9 PLAY Button
—
—
Pause (੬ pg. 40)
Playback start (੬ pg. 38)
0 START/STOP Button
! VISS Button
Functions same as the Recording Start/Stop button on the camcorder.
Ineffective
@ ZOOM (T/W) Buttons Zoom in/out (੬ pg. 18)
—
# VCR CTL Button
$ A.DUB Button
% STOP Button
^ INSERT Button
& R.A.EDIT Buttons
—
—
—
—
—
੬ pg. 46
Audio dubbing (੬ pg. 51)
Stop (੬ pg. 38)
Insert Editing (੬ pg. 50)
੬ pg. 48
EN45
FEATURE: Self-Timer, Animation and
Time-Lapse
Transmitted beam
effective area
PURPOSE:
The remote control lets you set/release Interval Timer
and Rec Time functions without using the Menu
Screen.
OPERATION:
Remote sensor
Self-Timer
1) Set
Instead of performing steps 1 through 4 on pg. 36
(“Self-Timer”), press INT. TIME on the remote control.
Each time INT. TIME is pressed, the Interval Timer
indicator appears, changing in the following order:
15S, 30S, 1MIN, 5MIN and No indication (off).
2) Release
When using the remote control, be sure to point it at
the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
Instead of setting “INT. TIME” to “OFF” in the Menu,
press INT. TIME on the remote control until the
Interval Timer indicator disappears.
Animation
Interval timer indicator
1) Set
Instead of performing steps 1 and 2 on pg. 37
(“Animation”), press REC TIME on the remote
control. Each time REC TIME is pressed, the Rec
Time indicator appears, changing in the following
order: 1/4S, 1/2S, 1S, 5S and No indication (off).
2) Release
1MIN
2S
1
Instead of using the Menu in step 5 on pg. 37, press
REC TIME on the remote control until the Rec Time
indicator disappears.
Rec time indicator
Time-Lapse
1) Set
Remote sensor
Instead of performing steps 1 through 3 on pg. 37
(“Time-Lapse”), press INT. TIME and REC TIME on
the remote control. Each time INT. TIME is pressed,
the Interval Timer indicator appears, changing in the
following order: 15S, 30S, 1MIN, 5MIN and No
indication (off). Each time REC TIME is pressed, the
Rec Time indicator appears, changing in the
following order: 1/4S, 1/2S, 1S, 5S and No indication
(off).
2) Release
Instead of using the Menu in step 5 on pg. 37, press
INT. TIME and REC TIME on the remote control until
the indicators disappear.
NOTE:
Also refer to pgs. 36 and 37.
START/STOP
INT. TIME
REC TIME
RM-V700U
(provided with
GR-FXM45,
optional for
GR-FXM15)
USING THE REMOTE CONTROL UNIT (cont.)
46
EN
Random Assemble Editing [R.A.Edit]
Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the RM-V700U MBR
(Multi-Brand Remote, ੬ pg. 44) is set to operate
with your brand of VCR (see VCR CODE LIST), but
can also be performed by operating the VCR
manually.
VCR
(Recording deck)
Before operation, make sure the lithium battery is
installed in the remote control RM-V700U
(੬ pg. 44).
SET REMOTE/VCR CODE
SET REMOTE TO OPERATE VCR
MBR SET
VCR CTL
1
4
7
2
5
8
3
6
9
1 Turn off the power to the VCR and point the
remote towards the VCR’s infrared sensor. Then,
referring to the VCR CODE LIST on the left,
press and hold MBR SET, and press button (A)
and then (B).
0
RM-V700U
(provided with GR-FXM45,
optional for GR-FXM15)
•The code is automatically set once you release
MBR SET, and the VCR’s power comes on.
OPERATE VCR
2 Make sure the VCR’s power is on. Then, while
holding VCR CTL, press the button on the
remote for the desired function. The functions
the remote can control are PLAY, STOP, PAUSE,
FF, REW and VCR REC STBY (you do not need
to press VCR CTL for this one).
VCR CODE LIST
VCR BRAND
NAME
BUTTONS
(A) (B)
VCR BRAND
NAME
BUTTONS
(A) (B)
AKAI
6
6
7
2ꢀ
4ꢀ
7
PHILIPS
1
9
1
9
9
9
1
3
7
9ꢀ
5ꢀ
1ꢀ
4ꢀ
1ꢀ
6ꢀ
2ꢀ
3ꢀ
2ꢀ
You are now ready to try Random Assemble
Editing.
BLAUPUNKT
FERGUSON
1
3
IMPORTANT
9
9
3
7ꢀ
8ꢀ
2
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with
yours or may offer limited functions.
GRUNDIG
HITACHI
1
3
4ꢀ
4
ꢀ
ꢀ
SANYO
3
3
6ꢀ
5
NOTES:
6
6
6ꢀ
3
● If the VCR’s power does not come on in step 1, try
another code from the VCR CODE LIST.
● Some brands of VCR do not come on
automatically. In this case, turn the power on
manually and try step 2.
SELECO,
REX
9
9
1ꢀ
6
JVC
A
B
C
9
9
9
1ꢀ
6ꢀ
3
SHARP
1
1
5ꢀ
`
6
6
3
3
9
9
9
3
5ꢀ
`ꢀ
9ꢀ
1ꢀ
1ꢀ
6ꢀ
7ꢀ
2
SONY
● If the remote control is not able to control the VCR,
use the controls on the VCR.
● When the remote control’s battery runs out, the
VCR brand you have set will be erased.
In that case, replace the old battery with a new one
and reset the VCR brand.
MITSUBISHI
6
6
7ꢀ
8
NEC
3
3
7ꢀ
8
ꢀ
THOMSON,
TELEFUNKEN,
SABA,
PANASONIC
1
1
1
9
1
3ꢀ
7ꢀ
1ꢀ
4ꢀ
8
NORDMENDE
TOSHIBA
6
6
9ꢀ
1
EN47
MAKE CONNECTIONS
CONNECT TO . . .
1
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL BUT EQUIPPED WITH
R.A. EDIT CONNECTOR
Open
the cover.
Open the cover.
Connect the editing cable to the R.A.EDIT
connector.
To J terminal
(JLIP)
To Video
Output
To Audio
Output
VCR OTHER THAN TYPE
OR
Connect the editing cable to the RM-V700U’s
PAUSE-IN connector.
PREPARE CAMCORDER
2 Insert a recorded tape, and set the Power Switch to
Video cable
(provided)
Audio cable
(provided)
“PLAY”.
PREPARE VCR
3 Turn the power on, insert a recordable tape and
Editing cable*
(ø3.5 mini-plug
cable)
engage the AUX mode (refer to the VCR’s instructions).
To AUDIO
and VIDEO IN
connectors
To Remote
PAUSE
VCR
To PAUSE-IN
TV
RM-V700U
(provided with GR-FXM45,
optional for GR-FXM15)
CONTINUED ON NEXT PAGE
USING THE REMOTE CONTROL UNIT (cont.)
48
EN
SELECT SCENES
Remote sensor
START SOURCE PLAYBACK
4 Press PLAY, then press ON/OFF on the remote
control. Make sure to point the remote control at the
camcorder’s remote sensor.
•The R.A. Edit counter display appears.
REGISTER BEGINNING OF SCENE
5 Press REW or FF to locate the beginning of the scene
you want, then press IN/OUT to register that point.
•The data appears under “IN” on the display.
REGISTER END OF SCENE
6 Press REW or FF to locate the end of the scene and
press IN/OUT to register it.
Power Switch
•The data appears under “OUT” on the display.
•The total time of the registered scene(s) is displayed
FF
PAUSE
CANCEL
ON/OFF
REW
PLAY
IN/OUT
at the bottom of the screen.
REGISTER ADDITIONAL SCENES
7 Repeat steps 5 and 6 for each additional scene
(as many as 8).
RM-V700U
(provided with GR-FXM45,
optional for GR-FXM15)
MAKE CORRECTIONS (IF NECESSARY)
8 Press CANCEL during steps 5 and 6 to erase the most
recently registered point.
NOTES:
IN
OUT
:
:
:
:
1
2
3
4
5
6
7
8
0 00 25
-- -- --
● There must be at least one second between an in-point
and its corresponding out-point.
● To ensure correct operation, there should be at least
15 seconds between an out-point and the next in-point.
● Blank portions of a tape cannot be registered as in-points
or out-points.
● If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
does not take place.
● Pressing ON/OFF clears all in- and out-points from
memory.
● Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
● Turning off the camcorder’s power erases all registered
in- and out-points.
:
:
COUNTER
TOTAL
0 00 25
:
:
0 00 00
IN
OUT
:
:
:
:
1
2
3
4
5
6
7
8
0 00 25
0 01 05
:
:
:
:
0 03 18
0 03 31
:
:
:
:
0 02 33
0 02 53
:
:
:
:
0 04 11
-- -- --
:
:
:
COUNTER
TOTAL
0 04 11
:
0 01 13
EN49
AUTOMATIC EDITING TO VCR
Original tape (camcorder)
1
IN
3
2
IN
PREPARE SOURCE TAPE
OUT
IN OUT
OUT
9 Rewind the tape in the camcorder to the beginning of
the scene you want to edit and press PAUSE.
ENGAGE VCR’S RECORD-PAUSE MODE
10 Point the remote control towards the VCR’s infrared
sensor and press VCR REC STBY, or manually engage
the VCR’s Record-Pause mode.
Edited tape (VCR)
BEGIN AUTOMATIC EDITING
11
Press MENU/DISPLAY on the camcorder, and the
previously selected scenes are copied to the VCR in
the specified order.
While editing, the R.A. Edit counter of the scene
which is being copied is shown with a blinking
highlight.
•Pressing START/STOP on the remote control does
not start editing.
END AUTOMATIC EDITING
12 When all selected scenes have been copied, the
MENU/DISPLAY Button
PAUSE (6) Button
camcorder and VCR enter the Still or Pause mode.
Press STOP on both units. To make the R.A. Edit
counter display disappear, press ON/OFF.
STOP (5) Button
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
REW (2) Button
NOTES:
Recording Start/Stop Button
Power Switch
● If you performed step 1 on page 47 (“MAKE CON-
NECTIONS”), keep the remote control pointed at the
VCR during editing.
Remote Sensor
● The on-screen display only appears while the camcorder
searches for each scene.
● There may be noise at in- or out-points on the edited
tape with certain VCRs.
RM-V700U
(provided with
GR-FXM45,
optional for
GR-FXM15)
VCR REC STBY
ON/OFF
USING THE REMOTE CONTROL UNIT (cont.)
50
EN
Insert Editing
Power Switch
You can record a new scene onto a previously recorded
tape, replacing a section of the original recording with
minimal picture distortion at the in- and out-points. The
original audio remains unchanged.
NOTE:
Use the RM-V700U remote control unit to perform this
procedure.
SELECT OPERATION MODE
1 Set the Power Switch to “PLAY”.
FIND EDIT-OUT POINT
2 Play back the tape, locate the Edit-Out point and
press PAUSE on the camcorder or the remote control.
REW (2) Button
FF (3) Button
PLAY/PAUSE (4/6) Button
RESET COUNTER
3 Press and hold COUNTER R/M for more than
1 second to reset the tape counter, then press again
for less than 1 second so that “M” appears.
STOP (5) Button
COUNTER R/M Button
FIND EDIT-IN POINT
4 Press REW to go a little beyond the beginning of the
scene you want to replace, press PLAY to view the
recorded tape, and press PAUSE exactly at the
Edit-In point where the new scene should start.
Display
w
Insert editing
indicator
ENGAGE INSERT EDITING MODE
5 Press and hold INSERT, and without releasing
:
:
M 0 12 34
Tape Counter
INSERT, press and release PAUSE. The Insert Editing
mode is engaged. When the scene the camcorder is
aimed at appears on the screen, go to the next step.
BEGIN INSERT EDITING
Remote sensor
6 Press START/STOP. When the counter reaches
“0:00:00”, editing stops automatically and the
camcorder enters the Insert-Pause mode.
END INSERT EDITING
7 Press STOP.
NOTES:
● During Insert Editing, the original audio will be heard
from the speaker.
● After step 5, Retake (੬ pg. 19) can be performed.
● The tape may stop slightly before or after the designated
end point, and noise bars may appear. Neither indicates
a defect in the unit.
● Only the video signal is recorded in the Insert Editing
mode.
RM-V700U
(provided with
GR-FXM45,
optional for
GR-FXM15)
START/
STOP
REW
PLAY
INSERT
STOP
PAUSE
EN51
Display
Audio Dubbing
e
4
Audio dubbing
indicator
You can record a new soundtrack on a prerecorded tape
(normal audio only).
:
:
M 0 05 20
Perform steps 1, 2 and 3 of the Insert Editing procedure
(੬ pg. 50) before continuing.
•The sound comes from the built-in microphone.
FIND EDIT-IN POINT
1 Press REW to go a little beyond the beginning of the
scene onto which you want to dub the new audio,
press PLAY to view the recorded tape, then press
PAUSE at exactly the point where dubbing should
start.
Remote sensor
ENGAGE AUDIO DUB-STANDBY MODE
2 Press and hold A. DUB, and without releasing
A. DUB, press and release PAUSE.
BEGIN AUDIO DUBBING
3 Press PLAY. When the counter reaches “0:00:00”,
Audio Dubbing stops automatically and the
camcorder enters the Audio Dub-Standby mode.
Microphone
END AUDIO DUBBING
4 PressSTOP.
NOTES:
PAUSE
● Do not press FF or REW during Audio Dub-Standby, or
the edit points will not be accurate.
A. DUB
STOP
REW
PLAY
● If the microphone is too close to the TV, or if the TV’s
volume is too high, whistling or howling may occur.
NOTES (for Insert Editing and
Audio Dubbing):
RM-V700U
(provided with GR-FXM45,
optional for GR-FXM15)
● Insert Editing and Audio Dubbing may not work
correctly if the tape contains blank segments.
● To edit/dub onto a tape, make sure the Erase Protection
tab is in the position that allows recording. If not, slide
the tab. Some cassettes have removable tabs. If the tab
has been removed, cover the hole with adhesive tape.
● Do not press STOP during Insert Editing or Audio
Dubbing, or the edit points will not be accurate.
● During Insert Editing and Audio Dubbing, when Insert-
Pause or Audio Dub-Standby is engaged, the counter
may go slightly past “0:00:00”. Recording, however,
stops at exactly 0:00:00.
USER MAINTENANCE
52
EN
LENS COVER Open/Close Ring
After Use
Set the Power Switch to “POWER OFF” to turn off
1 the camcorder.
Open the LCD monitor to an angle of over 60
2 degrees. Slide EJECT to open the cassette holder, then
remove the cassette.
Close and lock the cassette holder by pressing PUSH.
3
4
5
Close and lock the LCD monitor.
BATTERY RELEASE
Set to “POWER OFF”.
Slide BATTERY RELEASE to remove the battery pack.
Turn the LENS COVER Open/Close Ring to close
6 the lens cover.
Cleaning The Camcorder
CLEAN EXTERIOR
1 Wipe gently with a soft cloth.
Remove.
•Put cloth in diluted mild soap and wring it well to
wipe off heavy dirt, then wipe again with a dry
cloth.
PUSH
EJECT
CLEAN LCD MONITOR
2 Open the LCD monitor and wipe it gently with a soft
cloth. Be careful not to damage the monitor. Close
the LCD monitor.
CLEAN LENS
3 Blow it with a blower brush, then wipe it gently with
lens cleaning paper.
REMOVE EYEPIECE
4 Turn the eyepiece counterclockwise and pull it out.
CLEAN VIEWFINDER
5 Remove dust using a blower brush.
RE-ATTACH EYEPIECE
6 Re-attach the eyepiece and turn it clockwise.
NOTES:
● Avoid using strong cleaning agents such as benzine or alcohol.
● Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth, refer to the cautions that came with it.
● When removing the eyepiece, be sure to hold the viewfinder securely.
TROUBLESHOOTING
If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.
EN53
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery
pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as
usual from the beginning.
SYMPTOM
POSSIBLE CAUSE(S)
POWER
No power is supplied.
● The battery pack has not been attached correctly
(੬ pg. 6).
● The battery pack is not charged (੬ pg. 6).
● The power supply has not been correctly connected
(੬ pg. 7).
The power suddenly goes off and
does not come back on by itself.
● The battery pack has completely discharged.
● Remove the cassette and disconnect the power source, then
after a few minutes, try turning the power back on. If it still
does not come on, consult your nearest JVC dealer.
RECORDING
Recording cannot be performed.
● Make sure the Erase Protection tab is in the position that
allows recording. If not, slide the tab. Some cassettes have
removable tabs. If the tab has been removed, cover the
hole with adhesive tape.
Recording does not start.
● The camcorder Power Switch has not been set to
“CAMERA” (“AUTO“ or “PRO.“.) (੬ pg. 14).
Animation or Time-Lapse is not
available.
● Before recording in the Animation mode at the very
beginning of a tape, set the camcorder to the Recording
mode for about 5 seconds, so that the tape runs smoothly.
Using the Fade-in function at this point is a good way to
begin an animated program (੬ pg. 37, 45).
PLAYBACK
The tape is running, but there is no
playback picture.
● The TV has not been set to its VIDEO mode or channel.
● If A/V connection is used, the TV’s VIDEO/TV Switch has
not been set to VIDEO.
Playback picture is blurred or
interrupted.
● The video heads are dirty or worn out. Consult your nearest
JVC dealer for head cleaning or replacement.
The counter indication is blurred
during Still playback.
● This is normal.
TAPE TRANSPORT
The tape stops during fast-forward or
rewind.
● The Counter Memory Function has been activated
(੬ pg. 40).
Rewinding or fast-forwarding cannot
be performed.
● The tape is already fully wound on one reel or the other.
TROUBLESHOOTING (cont.)
54
EN
SYMPTOM
POSSIBLE CAUSE(S)
OTHER
During recording, the indications do
not appear.
● Press DISPLAY for longer than 1 second to make the
indications appear (੬ pg. 15).
The tape will not eject.
● The battery pack is running low.
● If the LCD monitor is not open over 60 degrees, the EJECT
Switch does not function.
Some functions are not available.
● The Power Switch is set to “AUTO”.
● Certain combinations of modes or effects are not possible
to use.
Vertical white lines appear when
shooting a very bright object.
● This sometimes occurs when the contrast between the
background and the object is great. It is not a defect of the
camcorder.
Bright, crystal-shaped spots appear in
the LCD monitor and the viewfinder.
● Sunlight is directly entering the lens. This is not a defect of
the camcorder.
The rear of the LCD monitor is hot.
● The light used to illuminate the LCD monitor causes it to be
hot. Close the LCD monitor to turn it off or set the Power
Switch to “OFF”, and let the unit cool down.
Coloured bright spots appear all over
the LCD monitor or the viewfinder.
● The LCD monitor and the viewfinder are made with high-
precision technology. However, black spots or bright spots
of light (red, green or blue) may appear constantly on the
LCD monitor or in the viewfinder. These spots are not
recorded on the tape. This is not due to any defect of the
unit. (Effective dots: more than 99.99 %.)
The indicators and the picture colour
on the LCD monitor are not clear.
● This may occur when the surface or the edge of the LCD
monitor is pressed.
The LCD monitor, the viewfinder and
the lens have become dirty (ex.
fingerprints).
● Wipe them gently with a soft cloth. Gently wipe in a
semicircular motion, as wiping strongly spreads the stain
and it won’t come out easily.
An error number (i.e. E03) appears.
● Turn the camcorder’s power off, then disconnect the power
source. After a few minutes, try turning the power on again. If
the error number still appears, consult your nearest JVC dealer.
The image is out of focus.
● The dioptre needs to be adjusted (੬ pg. 12).
● The scene being shot is adversely affecting the operation of
Auto Focus (੬ pg. 32).
The picture is blurred in the Quick
Review or Retake mode.
● This is normal while recording in the LP mode. Some noise
may be present while recording in the SP mode (੬ pg. 10).
The date and time displays
disappear.
● If you remove the power source from the camcorder while
the power is on, all settings and selections are erased. Make
sure to turn the camcorder’s power off before disconnecting
the power source.
The wrong date and time are
displayed/recorded.
● If you have not performed Date/Time Setting (੬ pg. 9), the
date and time are not displayed/recorded correctly. Be sure
that Date/Time setting is carried out.
Even though the lens cover is open,
the Lens Cover Warning indicator
blinks.
● The Lens Cover Warning indicator may blink when the
camcorder is used in dark areas, regardless of the position
of the lens cover.
INDEX Indications
EN55
1
2 3
4
5
30MIN
REC SP
T45
6
$
%
&
(
FADER
7
9
^
*
2
01
8
0
!
LENS COVER
PAUSE
1X
a
15S
5S
TAPE END
)
MERRY CHRISTMAS
@
#
:
:
25. 12. 99
BRIGHT
22 50 00
b
1 Cassette Warning/
$ Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack’s remaining power level:
Tape Remaining Time .......................... ੬ pg. 15
When no cassette is inserted: the cassette (
warning blinks.
)
“
”. When the power is
When the Erase Protection tab is not in the position
almost gone, the indicator “ ” blinks (battery
that allows recording: the cassette (
) warning
power warning), then the unit shuts off. Replace
the battery pack with a fully charged one.
Note: The symbol containing 3 darkened squares —
— does not necessarily mean that the battery
pack is fully charged.
lights. Otherwise, the tape remaining time is
displayed and the tape remaining time warning
blinks when the tape is about to reach its end.
When the Power Switch is set to “PLAY” and a
tape is loaded: the cassette (
regardless of the Erase Protection tab’s position.
) mark is displayed
% Focus Indicator .................................... ੬ pg. 33
^ Exposure Control Level Counter ........... ੬ pg. 31
& White Balance Mode Indicator ............ ੬ pg. 34
2 Recording Mode (SP/LP) Indicator ........ ੬ pg. 10
3, 7 Programme AE Indicator ................. ੬ pg. 24
Displayed at 3 for approx. 2 seconds when
Programme AE with special effects is switched
from one mode to another by pressing P.AE., then
only the indicator remains at 7.
3, 8 Fade/Wipe-Standby Indicator .......... ੬ pg. 23
Displayed at 3 for approx. 2 seconds when the
Fade/Wipe is switched from one effect to another
by pressing EFFECT, then only the indicator
remains at 8.
* •Record–Standby Mode Indicator ....... ੬ pg. 14
•Lens Cover Warning:
LENS COVER .................................... ੬ pg. 15
( Clock Battery Warning
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the clock
(lithium) battery is either not installed or has
discharged. Install or replace the old battery with
a new one (੬ pg. 8).
) •Tape End Display: TAPE END ............ ੬ pg. 15
Appears when the end of the tape is reached
during playback, recording or fast-forward.
•Condensation Warning:
4 Tape Length Indicator .......................... ੬ pg. 10
5 Zoom Indicator Bar ............................. ੬ pg. 18
Zoom Level Indicator
Approximate Zoom Ratio
When this indication appears, all functions
except tape eject and power on/off are disabled.
Turn the unit off (without removing the power
source) for a few hours, and when you turn it on
again the indication should disappear.
6 Recording Indicator ............................. ੬ pg. 14
9 Picture Stabilizer Indicator ................... ੬ pg. 20
0 •Interval Timer/Recording Time
Indicator ..................................... ੬pg. 36, 45
•5 Sec. Rec Mode Indicator
•Head Clog Warning:
Appears if dirty heads are detected during
recording. In such a case, use the optional
Cleaning Cassette. If, after using it, the problems
still exist, consult your nearest JVC dealer.
(GR-FXM15 only) .............................. ੬ pg. 20
! Instant Title Display ............................. ੬ pg. 27
@ Date/Time Display ............................... ੬ pg. 26
# •Bright Level Indicator ........................ ੬ pg. 39
•Speaker Volume Indicator ................. ੬ pg. 39
INDEX Controls, Connectors And Indicators
56
EN
u
t 2
1
i
q
p
Q
W
o
w e
7
8
T
9
!
0
@
#
^
$
%
)
3
4 5 6
E
R
Y
U
I
r
&
* y (
EN57
Controls
Connectors
1 Dioptre Adjustment Control ................. ੬ pg. 12
q DC IN Jack ............................................ ੬pg. 7
2 Lens Cover Open/Close Ring
The connectors w to r are located beneath the
cover.
[LENS COVER] .................................... ੬ pg. 14
3 Video Light Switch
w Video Output Connector ...................... ੬ pg. 42
e Audio Output Connector ..................... ੬ pg. 42
[LIGHT OFF/AUTO/ON]
(GR-FXM45 only)................................. ੬ pg. 21
r J Terminal [JLIP (Joint Level Interface Protocol)
4 •Snapshot Button [SNAPSHOT]
Connector]
(GR-FXM45 only) .............................. ੬ pg. 20
•Connect the editing cable when performing
Random Assemble Editing (੬ pg. 46 – 49).
•It is used to connect the camcorder to a device
such as a personal computer.
For further details consult your nearest JVC
dealer.
•JLIP-controlled editing from camcorder to VCR
is not possible if the VCR is not equipped with a
J terminal.
•5-Second Recording Button
[5 SEC REC] (GR-FXM15 only)........... ੬ pg. 20
5 •Power Zoom Lever [T/W] .................. ੬ pg. 18
•Speaker Volume Control [VOL.] ........ ੬ pg. 39
6 Picture Stabilizer Button
[P.STABILIZER] ..................................... ੬ pg. 20
7 Program AE Button [P.AE]..................... ੬ pg. 24
8 Fade/Wipe Button [EFFECT] ................. ੬ pg. 23
9 •Rewind Button [2, REW] ................ ੬ pg. 38
•Retake Rewind Button [RETAKE R]..... ੬ pg. 19
•Quick Review Button [ R] ............. ੬pg. 19
Indicators
t Tally Lamp ........................................... ੬ pg. 14
y Power Lamp ........................................ ੬ pg. 14
0 •Fast-Forward Button [3, FF] ............ ੬pg. 38
Other Parts
•Retake Forward Button [RETAKE F] .... ੬ pg. 19
! Stop Button [5, STOP] ......................... ੬pg. 38
u Battery Pack Mount ............................... ੬pg. 6
i Viewfinder ........................................... ੬ pg. 12
o Grip Strap ............................................ ੬ pg. 12
@ Play/Pause Button
[4/6, PLAY/PAUSE]............................. ੬ pg. 38
# •Select Dial [+, –, PUSH] ................ ੬ pg. 9, 28
p •Camera sensor
•Bright Dial [BRIGHT] ........................ ੬ pg. 17
Be careful not to cover this area; a sensor
necessary for shooting is built-in here.
•Remote Sensor .................................. ੬ pg. 45
$ MENU/DISPLAY Button ................. ੬ pg. 15, 28
% •Counter Reset/Memory Button
[COUNTER R/M] .............................. ੬ pg. 40
Q Video Light (GR-FXM45 only) .............. ੬ pg. 21
W Microphone......................................... ੬ pg. 51
E Eyepiece .............................................. ੬ pg. 52
R Speaker ............................................... ੬ pg. 39
T LCD Monitor ....................................... ੬ pg. 17
Y Shoulder Strap Eyelets .......................... ੬ pg. 13
U Clock Battery Slot .................................. ੬pg. 8
I Tripod Mounting Socket ....................... ੬ pg. 13
•Recording Mode Button [SP/LP] ......... ੬ pg. 10
% Counter Reset/Memory Button
[COUNTER R/M] ................................. ੬ pg. 40
^ EJECT Switch ....................................... ੬ pg. 11
& Recording Start/Stop Button.................. ੬ pg. 14
* Power Switch ................................ ੬pg. 14, 38
( Battery Release Switch
[BATTERY RELEASE] .............................. ੬ pg. 6
) PUSH Button ....................................... ੬ pg. 11
INDEX Terms
58
EN
A
M
AC Power Adapter/Charger ..................... ੬ pg. 6, 7
Animation Recording .......................... ੬ pg. 37, 45
Audio Dubbing ........................................ ੬ pg. 51
Auto Date Record ..................................... ੬ pg. 26
Auto Focus ............................................... ੬ pg. 32
Auto Shut off ...................................... ੬ pg. 15, 38
Manual Focus........................................... ੬pg. 33
Menu Screen ..................................... ੬pg. 29, 30
N
ND Effect Mode........................................ ੬ pg. 25
Nega/Posi Mode ....................................... ੬ pg. 25
P
B
Battery Pack ..................................... ੬ pg. 6, 7, 59
Picture Stabilizer ...................................... ੬ pg. 20
Power Switch Position .............................. ੬ pg. 14
Programme AE With Special Effects ........... ੬ pg. 24
Provided Accessories .................................. ੬pg. 3
Brighten The LCD Monitor ........................ ੬ pg. 17
C
Car Battery ................................................. ੬ pg. 7
Charge Marker............................................ ੬ pg. 7
Charge The Battery Pack ............................. ੬ pg. 6
Clean The Camcorder ............................... ੬ pg. 52
Clock (Lithium) Battery ............................... ੬ pg. 8
Connections ......................................... ੬ pg. 7, 42
Q
Quick Review .......................................... ੬pg. 19
R
Record-Standby ........................................ ੬ pg. 14
Recording Mode....................................... ੬ pg. 10
Remote Control ........................................ ੬ pg. 44
Retake...................................................... ੬pg. 19
Rewind The Tape ...................................... ੬ pg. 38
D
Darken The LCD Monitor ......................... ੬ pg. 17
Date/Time Display .................................... ੬ pg. 26
Date/Time Settings ...................................... ੬ pg. 9
Demonstration Mode ................................ ੬ pg. 30
Digital Zoom ............................................ ੬ pg. 29
Discharge The Battery Pack ........................ ੬ pg. 6
Dioptre Adjustment .................................. ੬ pg. 12
Dubbing................................................... ੬ pg. 43
S
Self-Timer ........................................... ੬pg. 36, 45
Sepia ....................................................... ੬ pg. 25
Shoulder Strap Attachment........................ ੬ pg. 13
Shuttle Search........................................... ੬pg. 40
Snapshot .................................................. ੬pg. 22
Specifications ........................................... ੬pg. 61
Still Playback............................................ ੬pg. 40
E
Electronic Fog Filter Mode ........................ ੬ pg. 25
Erase Protection ........................................ ੬ pg. 11
Exposure Control ...................................... ੬ pg. 31
T
Tally ......................................................... ੬pg. 30
Tape Counter ............................................ ੬pg. 38
Tape Length Setting................................... ੬ pg. 10
Tele Macro ............................................... ੬pg. 29
Time-Lapse Shooting .......................... ੬ pg. 37, 45
Tracking ................................................... ੬pg. 39
Tripod Mounting....................................... ੬ pg. 13
Twilight .................................................... ੬pg. 25
F
Fade-In/Out .............................................. ੬ pg. 23
Fast-Forward Tape .................................... ੬ pg. 38
5-Second Recording ................................. ੬ pg. 20
G
Gain ......................................................... ੬ pg. 29
Grip Adjustment ....................................... ੬ pg. 12
U
H
Unload A Tape ......................................... ੬ pg. 11
High Speed Shutter Mode ......................... ੬ pg. 25
W
I
White Balance.................................... ੬pg. 34, 35
Wide Mode .............................................. ੬pg. 29
Wipe In/Out ............................................. ੬pg. 23
Insert Editing............................................. ੬ pg. 50
Instant Titles ............................................. ੬ pg. 27
Interface Shooting ..................................... ੬ pg. 17
Z
J
Zooming .................................................. ੬pg. 18
Journalistic Shooting ................................. ੬ pg. 17
L
LCD Monitor/Viewfinder Indication .......... ੬ pg. 55
Load A Tape ............................................. ੬pg. 11
CAUTIONS
EN59
NOTES:
DANGER:
Video Light
●It is normal for the battery pack to be warm after
charging, or after use.
Temperature Range Specifications
Charging .............. 10°C to 35°C
Operation ............ 0°C to 40°C
Storage ................ –10°C to 30°C
●Recharging time is based on room temperature of
20°C (68°F).
•The video light becomes extremely hot. Do not
touch it either while in operation or soon after
turning it off, otherwise serious injury may result.
•Do not place the camcorder into the carrying case
immediately after using the video light, since it
remains extremely hot for some time.
●The lower the temperature, the longer recharging
takes.
•When operating, keep a distance of about 30 cm
between the video light and people or object.
•Do not use near flammable or explosive materials.
•It is recommended that you consult your nearest
JVC dealer for replacing the video light.
Cassettes
To properly use and store your cassettes, be sure to
read the following cautions:
General Battery Precautions
1. During use . . .
... make sure the cassette bears the VHS-C mark.
... be aware that recording onto prerecorded tapes
automatically erases the previously recorded
video and audio signals.
•When the C-P6U or C-P7U (cassette adapter) is not
functioning even when correctly operated, the
battery is exhausted. Replace it with a fresh one.
•Use only the following battery:
... make sure the cassette is positioned properly
when inserting.
C-P6U or C-P7U ..................... R6 (AA) size
... do not load and unload the cassette repeatedly
without allowing the tape to run at all. This
slackens the tape and can result in damage.
... do not open the front tape cover. This exposes
the tape to fingerprints and dust.
Please make note of the following rules for battery
use. When misused, battery can leak or explode.
1. Refer to the C-P6U/C-P7U instructions when
replacing the battery.
2. Do not expose the battery to excessive heat as it
can leak or explode.
3. Do not dispose of battery in a fire.
4. Remove battery from the unit if it is to be stored for
an extended period to avoid battery leakage which
can cause malfunctions.
2. Store cassettes . . .
... away from heaters or other heat sources.
... out of direct sunlight.
... where they won’t be subject to unnecessary
shock or vibration.
... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
... vertically, in their original cases.
Battery Packs
The battery packs are nickel-cadmium
or nickel metal-hydride batteries.
Before using the supplied battery pack
or an optional battery pack, be sure to
read the following cautions:
Main Unit
1. For safety, DO NOT . . .
... open the camcorder’s chassis.
... disassemble or modify the unit.
... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not in
use.
1. To avoid hazard . . .
... do not burn.
... do not short-circuit the terminals.
Terminals
... do not modify or disassemble.
... use only specified chargers.
... allow inflammables, water or metallic objects
to enter the unit.
... remove the battery pack or disconnect the
power supply while the power is on.
... leave the battery pack attached when the
camcorder is not in use.
2. To prevent damage and prolong service life . . .
... do not subject to unnecessary shock.
... avoid repeated charging without fully discharging.
... charge in an environment where temperatures
are within the tolerances shown in the chart
below. This is a chemical reaction type
battery—cooler temperatures impede chemical
reaction, while warmer temperatures can
prevent complete charging.
... store in a cool, dry place. Extended exposure to
high temperatures will increase natural
discharge and shorten service life.
... avoid prolonged uncharged storage.
... remove from charger or powered unit when not
in use, as some machines use current even
when switched off.
2. Avoid using the unit . . .
... in places subject to excessive humidity or dust.
... in places subject to soot or steam such as near a
cooking stove.
... in places subject to excessive shock or
vibration.
... near a television set.
... near appliances generating strong magnetic or
electric fields (speakers, broadcasting antennas,
etc.).
... in places subject to extremely high (over 40°C)
or extremely low (under 0°C) temperatures.
CAUTIONS (cont.)
60
EN
3. DO NOT leave the unit . . .
... in places of over 50°C.
Special Notes On Video Heads
Dust and dirt on video heads
1. Always allow enough time for your camcorder to
acclimatize to its environment before using it.
2. Do not use the unit in areas of high humidity.
(Typical areas of high humidity are given below.)
•From being used or stored in a very cold outdoor
situation, then immediately being used in a warm
indoor situation.
•From being used or stored in a cool air-conditioned
situation, then being used in a high-humidity
outdoor situation.
•Other areas where rapid large temperature changes
can occur.
3. Taking care of your “C” format video cassette tapes.
•Store the video cassette tapes in a vertical position,
complete in their cassette cases.
•During transportation, always store cassettes in
their cassette cases.
... in places where humidity is extremely low.
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
4. To protect the unit, DO NOT . . .
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive vibration during
transportation.
... keep the lens directed at extremely bright
objects for long periods.
... direct the eyepiece of the viewfinder at the sun.
... carry it by holding the viewfinder or the LCD
monitor. Be sure to hold the main unit with
both hands or use the grip.
... swing it excessively when using the shoulder
strap.
4. Check recorded information at regular intervals. If
the camcorder is equipped with a quick review
facility, use this facility to check whether the picture
is clear or not.
If the quick review or playback picture is not clear,
then the video heads may be dirty.
LCD Monitor
1. To prevent damage to the LCD monitor,
DO NOT . . .
... push it strongly or apply any shocks.
... place the camcorder with the LCD monitor on
the bottom.
2. To prolong service life . . .
... avoid rubbing it with coarse cloth.
3. Be aware of the following phenomena for LCD
monitor use. These are not malfunctions . . .
•While using the camcorder, the surface around the
LCD monitor and/or the back of the LCD monitor
may heat up.
•If you leave power on for a long time, the surface
around the LCD monitor becomes hot.
Note:
As a maladjusted tracking control can give similar
symptoms to dirty video heads, please check that the
tracking control of the unit is in the centre position.
Cleaning the video heads
Accumulation of dirt and other particles on the video
heads may cause the playback picture to become
blurred or interrupted. Although this camcorder is
equipped with a built-in head cleaner which
automatically cleans the heads, reducing the likelihood
of dirty heads, if such troubles are encountered, we
recommend the use of the cleaning cassette specifically
designed for JVC camcorders, model number TCC-2U.
Please use the cleaning cassette as indicated below:
1 After inserting the cleaning cassette, activate the
Play mode for a maximum of 15 seconds (normally,
5 seconds is sufficient).
About moisture condensation . . .
2 Remove the cleaning cassette and check the
playback picture with a previously good-recorded
tape.
● You may have observed that pouring a cold
liquid into a glass will cause drops of water to
form on the glass’ outer surface. This same
phenomenon occurs on the head drum of a
camcorder when it is moved from a cool place
to a warm place, after heating a cold room,
under extremely humid conditions or in a
place directly subjected to the cool air from an
air conditioner.
3 If the picture is clear, then recording on a new tape
can begin when desired.
4 If the picture is not clear, repeat steps 1 to 3 up to
two more times.
5 If the picture is still unclear, consult your local JVC
dealer.
Important Note:
● Moisture on the head drum can cause severe
damage to the video tape, and can lead to
internal damage to the camcorder itself.
If heads have become dirty, the associated tape will
also be damaged, please do not use the tape again.
•A built-in head cleaner automatically cleans the video
heads and head drum whenever a cassette is loaded
and unloaded to reduce head clogging.
•Cleaning cassette TCC-2U is available from your JVC
local dealer.
Serious malfunctioning
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
SPECIFICATIONS
EN61
Camcorder
General
Operating temperature: 0°C to 40°C
Format
: VHS PAL standard
Operating humidity : 35% to 80%
Storage temperature : –20°C to 50°C
Weight
Power source
Power consumption
LCD monitor off,
viewfinder on
LCD monitor on,
viewfinder off
LCD monitor on,
viewfinder on
: DC 6.0 V
: 5.7 W
: 6.2 W
: 6.8 W
GR-FXM45 : Approx. 880g
GR-FXM15 : Approx. 880g
Dimensions
: 99 (W) x 119 (H) x 198 (D) mm
(with the LCD monitor closed
and with the viewfinder fully
tilted downward)
Video light
(GR-FXM45 only)
Signal system
Video recording system
Luminance
: 2.9 W
: PAL-type
Pickup
Lens
: 1/4” format CCD
: F1.6, f = 3.9 to 62.4 mm, 16:1
power zoom lens with auto iris
and macro control, filter
diameter 40.5 mm
: Electronic viewfinder with
0.5” black/white CRT
: FM recording
Colour
: Converted sub-carrier
direct recording
Viewfinder
Conforms to VHS standard
White balance
adjustment
LCD monitor
Cassette
:
cassette
: Auto/Manual adjustment
Tape speed
SP
LP
: 23.39 mm/sec.
: 11.70 mm/sec.
GR-FXM45 : 3” diagonally measured, LCD
panel/TFT active matrix
Recording time (max.)
SP
GR-FXM15 : 2.5” diagonally measured, LCD
: 60 minutes
panel/TFT active matrix
(with EC -60 cassette)
Speaker
Audio
: Monaural
LP
: 120 minutes
Connectors
JLIP
: ø3.5 mm, 4-pole, mini-head
jack
(compatible with RC-5325 plug)
: –8 dBs, 1 kΩ analogue output
Video
: 1 Vp-p, 75 Ω unbalanced,
(via Audio output connector)
analogue output
(via Video output connector)
Provided Accessories ..................
pg. 4
AC Power Adapter/Charger AA-V15EA
੬
Power requirement
: AC 110 V to 240 V`,
50/60 Hz
Optional Accessories
Power consumption : 23 W
Output
Charge
VTR
•Battery Packs BN-V12U, BN-V20U, BN-V856U
•Car Battery Charger BH-V3E
: DC 8.5 V
: DC 6.3 V
, 1.3 A
, 1.8 A
•Compact VHS (
) Cassettes EC-60/45/30
•Active Carrying Bag CB-V7U
•Remote Control Unit RM-V700U
Charging system
: Constant current, peak
detection, timer controlled
Dimensions
Weight
: 140 (W) x 42 (H) x 68 (D) mm
: Approx. 300 g
Some accessories are not available in some areas. Please
consult your nearest JVC dealer for details on accessories
and their availability.
Cassette Adapter C-P7U
E & O.E. Design and specifications subject to change
without notice.
Dimensions
Weight
: 188 (W) x 25 (H) x 104 (D) mm
: Approx. 240 g
Accessory
: “R6 (AA)”-size battery x 1
MEMO
MEMO
VICTOR COMPANY OF JAPAN, LIMITED
0P1ri9n9teAdYiVn*JaUpNa*nVP
EA
COPYRIGHT© 1999 VICTOR COMPANY OF JAPAN, LTD.
|