CD RECEIVER
KD-G456
KD-G456
‡§√Õ߇≈π CD
For installation and connections, refer to the separate manual.
°√≥“¥§¡Õ∑·¬°µ“ßÀ“° „π°“√µ¥µß·≈–°“√‡™Õ¡µÕ
INSTRUCTIONS
§”·π–π”
GET0291-001A
[UH]
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit ...............................
How to forcibly eject a disc........................
How to use the MODE button ...................
2
2
3
MP3 OPERATIONS ......................... 16
Playing an MP3 disc ................................. 16
Locating a file or a particular portion
on an MP3 disc....................................... 17
Selecting MP3 playback modes ................ 19
LOCATION OF THE BUTTONS ............
Control panel.............................................
Remote controller......................................
Preparing the remote controller ................
4
4
5
6
SOUND ADJUSTMENTS ................... 20
Selecting preset sound modes
(C-EQ: custom equalizer) ....................... 20
Adjusting the sound .................................. 21
BASIC OPERATIONS .......................
Turning on the power ................................
Setting the clock........................................
7
7
8
OTHER MAIN FUNCTIONS ................ 22
Changing the general settings (PSM) ....... 22
Detaching the control panel ...................... 24
RADIO OPERATIONS ......................
9
Listening to the radio.................................
9
Storing stations in memory ....................... 10
Tuning in to a preset station ...................... 11
CD CHANGER OPERATIONS .............. 25
Playing discs ............................................. 25
Selecting the playback modes .................. 28
CD OPERATIONS ........................... 12
Playing a CD ............................................. 12
Locating a track or a particular portion
EXTERNAL COMPONENT OPERATIONS ... 29
Playing an external compoenent ............... 29
on a CD .................................................. 13
Selecting CD playback modes .................. 14
Playing a CD Text ...................................... 15
Prohibiting disc ejection ............................ 15
ADDITIONAL INFORMATION ............. 30
Playing a CD-R or CD-RW ........................ 30
Playing an MP3 disc ................................. 30
TROUBLESHOOTING ...................... 31
MAINTENANCE ............................. 34
SPECIFICATIONS........................... 35
How to use the MODE button
If you press MODE, the unit goes into functions mode, then the number buttons and 5/∞ buttons
work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
Time countdown indicator
To use these buttons for original functions again after pressing MODE, wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
BEFORE USE
*For safety....
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
3
LOCATION OF THE BUTTONS
Control panel
Display window
1
(standby/on attenuator) button
Display window
s Tuner reception indicators
MO (monaural), ST (stereo)
d MP3 indicator
f CH (CD changer) indicator
• Lights up only when connecting to a CD changer.
g CD indicator
2 SEL (select) button
3 CD CD-CH (CD changer) button
4 FM/AM button
5 Loading slot
6 Display window
7 0 (eject) button
8 EQ (equalizer) button
9 Remote sensor
h Playback item/mode indicators
RND (random),
RPT (repeat)
j LOUD (loudness) indicator
k EQ (equalizer) indicator
l Sound mode (C-EQ: custom equalizer)
(disc),
(folder),
p 5 (up) button
+10 button
q Control dial
w Number buttons
e MO (monaural) button
r SSM (Strong-station Sequential Memory)
button
t RPT (repeat) button
y RND (random) button
u MODE button
indicators
ROCK, CLASSIC, POPS, HIP HOP, JAZZ,
USER
•
also works as the time countdown
indicator.
/ Disc information indicators
i DISP (display) button
o
;
TAG (ID3 Tag),
z Main display
x Source display
Volume level indicator
c Tr (track) indicator
(folder),
(track/file)
4/¢
buttons
(control panel release) button
a ∞ (down) button
–10 button
4
3 • Selects the preset stations while listening to
the radio.
Remote controller
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.
• Skips to the first file of the previous folder
while listening to an MP3 disc.
Each time you press the button, you can
move to the previous folder and start playing
the first file.
• While playing an MP3 disc on an MP3-
compatible CD changer;
– Skips to the previous disc if pressed briefly.
– Skips to the previous folder if pressed and
held.
Note: While playing a CD on a CD changer, this
always skips to the previous disc.
4 Functions the same as the control dial on the
main unit.
Note: These buttons do not function for the
preferred setting mode (PSM) adjustment.
5 Selects the sound mode (C-EQ: custom
equalizer).
1 • Turns on the unit if pressed when the unit is
turned off.
Each time you press the button, the sound
mode (C-EQ) changes.
• Turns off the unit if pressed and held until
“SEE YOU” appears on the display.
• Drops the volume level in a moment if
pressed briefly.
6 Selects the source.
Each time you press the button, the source
changes.
Press again to resume the volume.
2 • Selects the band while listening to the radio.
Each time you press the button, the band
changes.
7 • Searches for stations while listening to the
radio.
• Fast-forwards or reverses the track/file if
pressed and held while listening to a disc.
• Skips to the beginning of the next track/file
or goes back to the beginning of the current
(or previous) tracks/files if pressed briefly
while listening to a disc.
• Skips to the first file of the next folder while
listening to an MP3 disc.
Each time you press the button, you can
move to the next folder and start playing the
first file.
• While playing an MP3 disc on an MP3-
compatible CD changer;
– Skips to the next disc if pressed briefly.
– Skips to the next folder if pressed and held.
Note: While playing a CD on a CD changer, this
always skips to the next disc.
5
3. Return the battery holder.
Preparing the remote controller
Insert again the battery holder by pushing it
until you hear a clicking sound.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
Remote sensor
(back side)
WARNING:
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
• Store the battery in a place where children
cannot reach.
If a child accidentally swallows the battery,
consult a doctor immediately.
• Do not recharge, short, disassemble, or heat the
battery or dispose of it in a fire.
Doing any of these things may cause the battery
to give off heat, crack, or start a fire.
• Do not leave the battery with other metallic
materials.
Doing this may cause the battery to give off
heat, crack, or start a fire.
• When throwing away or saving the battery, wrap
it in tape and insulate; otherwise, the battery
may start to give off heat, crack, or start a fire.
• Do not poke the battery with tweezers or similar
tools.
Installing the battery
When the controllable range or effectiveness of
the remote controller decreases, replace the
battery.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point
pen or a similar tool.
2) Remove the battery holder.
Doing this may cause the battery to give off
heat, crack, or start a fire.
(back side)
CAUTION:
DO NOT leave the remote controller in a place
(such as dashboards) exposed to direct sunlight for
a long time. Otherwise, it may be damaged.
2. Place the battery.
Slide the battery into the holder with the +
side facing upwards so that the battery is
fixed in the holder.
Lithium coin
battery (product
number: CR2025)
6
BASIC OPERATIONS
1
3
2
Volume level appears.
Turning on the power
1 Turn on the power.
Volume level indicator
4 Adjust the sound as you want.
Note on One-Touch Operation:
(See pages 20 and 21.)
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
To drop the volume in a moment
2 Select the source.
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To operate the tuner (FM or AM),
see pages 9 – 11.
To play a CD,
see pages 12 – 15.
To play an MP3 disc,
see pages 16 – 19.
To operate the CD changer,
see pages 25 – 28.
To turn off the power
Press and hold
second.
“SEE YOU” appears, then the unit turns off.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you turn
on the power.
for more than one
To operate the external component
(LINE IN), see page 29.
3 Adjust the volume.
To increase the volume
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
To decrease the volume
7
To check the current clock time or change the
display mode
Setting the clock
Press DISP (display) repeatedly.
Each time you press the button, the
display changes as follows:
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 22.)
• During tuner operation:
• During disc operation:
2 Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
1
2
Notes:
• While playing an audio CD, “NO NAME” appears
for the disc title/performer and the track title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 15 and 17.
3 Set the minute.
• During external component operation:
1 Select “CLOCK M” (minute).
2 Adjust the minute.
1
2
• During power off:
The power turns on and the clock time is shown
for 5 seconds, then the power turns off.
4 Finish the setting.
8
RADIO OPERATIONS
To stop searching before a station is received,
press the same button you have pressed for
searching.
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching for a station manually:
Manual search
Searching for a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
2 Press and hold ¢
or
4 until
“M” (manual) starts flashing on the
display.
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Start searching for a station.
To search for stations of
higher frequencies
To search for stations of lower frequencies
When a station is received, searching stops.
CONTINUED ON THE NEXT PAGE
9
Storing stations in memory
3 Tune in to a station you want while
“M” (manual) is still flashing.
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
To tune in to stations of
higher frequencies
• Manual preset of both FM and AM stations
To tune in to stations of lower frequencies
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for
FM and 9 kHz for AM) until you release
the button.
1 Select the FM band (FM1 – 3) you
want to store FM stations into.
Each time you press the
button, the band changes as
follows:
When an FM stereo broadcast is hard to
receive:
1 Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.
2 Press MODE to enter the functions
mode.
2 Press MO (monaural), while
“MODE” is still flashing on the
display, so that “MONO”
appears on the display.
Each time you press the button,
monaural mode turns on and off
alternately.
3 Press and hold SSM for about
2 seconds.
MO (monaural) indicator
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
“SSM” flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number
buttons—No.1 (lowest frequency) to No.6
(highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
10
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
4 Repeat the above procedure to store
other stations into other preset
numbers.
Ex.: Storing FM station of 92.5 MHz into the
preset number 1 of the FM1 band.
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
1 Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
Each time you press the
button, the band changes as
follows:
Tuning in to a preset station
You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on pages 10 and 11.
2 Tune in to a station (in this example,
of 92.5 MHz).
To tune in to stations of
higher frequencies
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
To tune in to stations of lower frequencies
2 Select the number (1 – 6) for the
preset station you want.
3 Press and hold the number button
(in this example, 1) for more than
2 seconds.
Note:
You can also use the 5 (up) or ∞ (down) button on
the unit to select the next or previous preset stations.
Each time you press the 5 (up) or ∞ (down) button,
the next or previous preset station is tuned in.
Preset number flashes for a while.
11
CD OPERATIONS
Refer “MP3 OPERATIONS” on pages 16 to 19 for
operating MP3 discs.
Notes:
• When a CD is inserted upside down, “EJECT”
appears on the display and the CD automatically
ejects.
• If there is no CD in the loading slot, you cannot
select CD as the source. “NO DISC” appears on
the display.
Playing a CD
Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
playback automatically.
To stop play and eject the CD
Press 0.
CD play stops and the CD automatically ejects
from the loading slot. The source changes to the
previously selected source.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing
CD CD-CH turns on the unit and starts playback
automatically.
• If you change the source, CD play also stops
(without ejecting the CD).
CD indicator
Next time you select “CD” as the source, CD
play starts from where playback has been
stopped previously.
Current source indication
Notes:
• If the ejected disc is not removed for about 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
Total playing time Total track number
of the inserted disc of the inserted disc
Elapsed playing time Current track
number
All tracks will be played repeatedly until you stop
playback.
12
To go to a track quickly (+10 and –10 buttons)
Locating a track or a
particular portion on a CD
1
Press MODE to enter the functions mode
while playing a CD.
To fast-forward or reverse the track
Press and hold ¢
playing a CD, to fast-forward the
track.
, while
2
Press +10 or –10.
Press and hold
reverse the track.
4, while playing a CD, to
To skip 10 tracks* forwards
to the last track
To skip 10 tracks* backwards
to the first track
To go to the next or previous tracks
* First time you press +10 or –10 button, the
track skips to the nearest higher or lower
track with a track number of multiple ten (ex.
10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks (see “How to use the +10 and
–10 buttons” below).
Press ¢
briefly, while
playing a CD, to go ahead to the
beginning of the next track.
Each time you press the button
consecutively, the beginning of
the next tracks is located and
played back.
• After the last track, the first track will be
selected, and vice versa.
Press
4 briefly, while playing a CD, to go
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
How to use the +10 and –10 buttons
• Ex. 1: To select track number 32 while
playing track number 6
To go to a particular track directly
Press the number button corresponding to the
track number to start its playback.
(Three times)
(Twice)
Track 6
\ 10 \ 20 \ 30 \ 31 \ 32
• Ex. 2: To select track number 8 while
playing track number 36
• To select a track number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a track number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.
(Three times)
(Twice)
Track 36
\ 30 \ 20 \ 10 \ 9 \ 8
13
To play back tracks repeatedly
(Track Repeat Play)
Selecting CD playback modes
To play back tracks at random
(Disc Random Play)
You can play back the current track repeatedly.
1 Press MODE to enter the
functions mode while playing a
CD.
You can play back all tracks on the CD at random.
1 Press MODE to enter the
functions mode while playing a
CD.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display, so that “TRK RPT”
appears on the display.
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “DISC RND”
appears on the display.
Each time you press the button,
track repeat play mode turns on
and off alternately.
Each time you press the button,
disc random play mode turns on
and off alternately.
RPT indicator
RND and
(disc) indicators
When track repeat play is turned on, the RPT
indicator lights up on the display. The current
track starts playing repeatedly.
When disc random play is turned on, the
RND and indicators light up on the display. A
track randomly selected starts playing.
14
Playing a CD Text
Prohibiting disc ejection
In a CD Text, some information about the disc (its
disc title, performer, and track title) is recorded.
This CD Text information will be shown
You can prohibit disc ejection and can lock a disc
in the loading slot.
automatically when you play a CD Text.
While pressing CD CD-CH, press and
hold 0 for more than 2 seconds.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes as follows:
“EJECT”flashes on the display for about 5 seconds,
and the disc is locked and cannot be ejected.
To cancel the prohibition and unlock the
disc
While pressing CD CD-CH, press and hold 0
again for more than 2 seconds.
“EJECT” appears on the display, and the disc
ejects from the loading slot.
Notes:
• The display shows up to 8 characters at one time
and scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 23.
Some characters or symbols will not be shown (and
be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press DISP (display) while playing an
audio CD, “NO NAME” appears for the disc title/
performer and the track title.
• When track title is shown, the Tr indicator and
current track number also appear on the right side
of the display.
15
MP3 OPERATIONS
Refer also to “CD OPERATIONS” on pages
12 to 15.
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 17.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
Playing an MP3 disc
Insert an MP3 disc into the loading slot.
Note on One-Touch operation:
To stop play and eject the disc
Press 0.
Playback stops and the disc automatically ejects
from the loading slot.
When a disc is already in the loading slot, pressing
CD CD-CH turns on the unit and starts playback
automatically.
CD indicator
Current source indication
MP3 indicator
Total folder
number
Total file
number
Ex.: When the disc contains 19 folders and
144 MP3 files
All files will be played repeatedly until you stop
playback.
16
To change the display information
While playing back an MP3 file, you can change
the MP3 disc information shown on the display.
Locating a file or a particular
portion on an MP3 disc
Press DISP (display) repeatedly.
Each time you press the button,
the display changes to show the
following:
To fast-forward or reverse the file
Press and hold ¢
playing an MP3 disc, to fast-
forward the file.
while
• When “TAG DISP”is set to “TAG ON”
(initial setting: see page 23)
Press and hold
disc, to reverse the file.
4 while playing an MP3
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
To skip to the next or previous files
Press ¢
briefly while
playing, to skip ahead to the
beginning of the next file.
Each time you press the button
consecutively, the beginning of
the next files is located and
played back.
* If an MP3 file does not have ID3 tags, folder
name and file name appear. In this case, the
TAG indicator will not light up on the display.
Press
4 briefly, while playing, to skip back
• When“TAG DISP”is set to“TAG OFF”
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
To go to a particular file quickly within the
current folder (+10 and –10 buttons)
1
Press MODE to enter the functions mode
while playing an MP3 disc.
2
Press +10 or –10.
Notes:
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 23.
• When folder or file name is shown, current folder
number or the Tr indicator and current file number
also appear on the right side of the display.
To skip 10 files* forwards to
the last file
To skip 10 files* backwards to
the first file
CONTINUED ON THE NEXT PAGE
17
* First time you press +10 or –10 button, the
file skips to the nearest higher or lower file
with a file number of multiple ten (ex. 10th,
20th, 30th).
Press the number button corresponding to the
folder number to start playing the first file in the
selected folder.
Then each time you press the button, you
can skip 10 files (see “How to use the +10
and –10 buttons” below).
• After the last file, the first file will be
selected, and vice versa.
• To select a folder number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
How to use the +10 and –10 buttons
• To select a folder number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than one
second.
• Ex. 1: To select file number 32 while playing
file number 6
Notes:
• If indicator flashes on the display after you have
selected a folder, it means that the folder does not
contain any MP3 files.
• You cannot directly select a folder with a number
greater than 12.
(Three times)
(Twice)
File 6
\ 10 \ 20 \ 30 \ 31 \ 32
• Ex. 2: To select file number 8 while playing
file number 36
To select a particular file in a folder, press
¢
or
4 after selecting the folder.
(Three times)
(Twice)
To skip to the next or previous folder
File 36 \ 30 \ 20 \ 10 \ 9 \ 8
Press 5 (up) while playing an
MP3 disc to skip to the next
folder.
To go to a particular folder directly
Each time you press the button
consecutively, the next folder is
located (and the first file in the
folder starts playing, if recorded).
IMPORTANT:
To directly select the folders using the number
button(s), it is required that folders are
assigned 2 digit numbers at the beginning of
their folder names. (This can only be done
during the recording of CD-Rs or CD-RWs.)
Ex.: If folder name is “01 ABC”
= Press 1 to go to Folder 01 ABC.
If folder name is “1 ABC,” pressing 1
does not work.
Press ∞ (down) while playing an MP3 disc to
skip back to the previous folder.
Each time you press the button consecutively,
the previous folder is located (and the first file in
the folder starts playing, if recorded).
Note:
If the folder does not contain any MP3 files, it is
If folder name is “12 ABC”
= Press and hold 6 (12) to go to Folder
12 ABC.
skipped.
18
To play back files repeatedly
(Track Repeat/Folder Repeat Play)
Selecting MP3 playback modes
To play back files at random
(Folder Random/Disc Random Play)
You can play back the current file or all the files
in the current folder repeatedly.
1 Press MODE to enter the
functions mode while playing an
MP3 disc.
You can play back all files of the current folder or
all files on the MP3 disc at random.
1 Press MODE to enter the
functions mode while playing an
MP3 disc.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display, so that “TRK RPT” or
“FLDR RPT” appears on the
display.
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “FLDR RND” or
“DISC RND” appears on the
display.
Each time you press the button,
the repeat play mode changes
as follows:
Each time you press the button,
the random play mode changes
as follows:
RPT indicator
RND and
(folder) indicators
Ex.: When you select “TRK RPT”
Ex.: When you select “FLDR RND”
Active
Mode
Plays repeatedly
indicator
TRK RPT RPT indicator The current (or
lights up. specified) file.
FLDR RPT and RPT All files of the
Active
indicator
Mode
Plays at random
FLDR RND RND and
indicators
All files of the
current folder, then
files of the next
folder and so on.
indicators
light up.
current (or
specified) folder.
light up.
DISC RND RND and
indicators
All files on the disc.
light up.
19
SOUND ADJUSTMENTS
Selecting preset sound modes
Indication
For:
Preset values
BAS TRE LOUD
(C-EQ: custom equalizer)
USER
ROCK
(User sound
mode)
+02
+03
+01
+01
+01
–02
OFF
You can select a preset sound mode (C-EQ:
custom equalizer) suitable to the music genre.
Rock or
disco music
ON
Select the sound mode you want.
CLASSIC Classical
music
OFF
Each time you press the
button, the sound modes
change as follows:
POPS
Light music
+04
+02
+01
00
OFF
ON
HIP HOP Funk or rap
music
JAZZ
Jazz music
+02
+03
OFF
Note:
You can adjust each sound mode to your preference.
Once you make an adjustment, it is automatically
stored for the currently selected sound mode. See
“Adjusting the sound” on page 21.
Indication pattern changes for each
sound mode except for “USER.”
Ex.: When you select “ROCK”
20
1
*
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the
currently selected sound mode (C-EQ) including
“USER.”
If you are using a two-speaker system, set the fader
level to “00.”
Normally the control dial works as the volume
control. So you do not have to select “VOL” to
adjust the volume level.
Depending on the amplifier gain control setting.
(See page 23 for details.)
Adjusting the sound
You can adjust the sound characteristics to your
preference.
2
3
*
1 Select the item you want to adjust.
*
Each time you press the
button, the adjustable items
change as follows:
4
*
2 Adjust the setting.
To increase the level or
turn on the loudness
To decrease the level or
turn off the loudness
Indication
To do:
Range
BAS*1
Adjust the bass.
–06 (min.)
|
+06 (max.)
Indication pattern changes as
you adjust the bass or treble.
TRE*1
FAD*2
BAL
Adjust the treble. –06 (min.)
|
+06 (max.)
Adjust the front
and rear speaker
balance.
R06 (Rear only)
|
F06 (Front only)
Ex. 1: When you adjust “TRE” (treble)
LOUD indicator
Adjust the left
and right speaker
balance.
L06 (Left only)
|
R06 (Right only)
LOUD*1
Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
Ex. 2: When you turn on the loudness
LOUD ON
|
LOUD OFF
3 Repeat steps 1 and 2 to adjust the
other items.
VOL*3
Adjust the volume. 00 (min.)
|
To reset each sound mode to the factory
settings, repeat the same procedure and
reassign the preset values listed in the table on
page 20.
30 or 50 (max.)*4
21
OTHER MAIN FUNCTIONS
Changing the general settings
(PSM)
3 Adjust the PSM item selected.
You can change the items listed in the table
below by using the PSM (Preferred Setting
Mode) control.
Basic Procedure
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See below.)
5 Finish the setting.
2 Select the PSM item you want to
adjust.
Preferred Setting Mode (PSM) items
• For detailed operations of each PSM items, refer to the pages listed in the table.
Factory-preset See
Indications
Selectable values/items
settings
page
CLOCK H
CLOCK M
DIMMER
SCROLL
Hour adjustment
Minute adjustment
Dimmer mode
Scroll mode
1 – 12
1 (1:00)
8
00 – 59
00 (1:00)
OFF
OFF
ON
23
23
ONCE
AUTO
ONCE
OFF
EXT IN*
External component
Tag display
CHANGER
TAG OFF
LINE IN
TAG ON
CHANGER
TAG ON
23
23
23
TAG DISP
AMP GAIN Amplifier gain control
LOW PWR
HIGH PWR
HIGH PWR
* Displayed only when one of the following sources is selected—FM, AM, and CD.
22
To select the dimmer mode—DIMMER
You can dim the display at night (according to
your preference).
When shipped from the factory, dimmer is
deactivated.
To turn the tag display on or off
—TAG DISP
An MP3 file can contain file information called
“ID3 Tag” where its album name, performer, track
title, etc. are recorded.
There are two versions–ID3v1 (ID3 Tag version
1) and ID3v2 (ID3 Tag version 2). If both ID3v1
and ID3v2 are recorded on a disc, ID3v2
information will be shown.
• OFF:
• ON:
Cancels the dimmer.
Activates the dimmer.
When shipped from the factory, “TAG ON” is
selected.
To select the scroll mode—SCROLL
You can select the scroll mode for the disc
information (when the entire text cannot be
shown at once).
When shipped from the factory, scroll mode is set
to “ONCE.”
• TAG OFF: Turns off the ID3 tag display while
playing MP3 files. (Only the folder
name and file name can be
shown.)
• TAG ON:
Turns on the ID3 tag display while
playing MP3 files.
• ONCE:
• AUTO:
Scrolls only once.
• If an MP3 file does not have ID3
tags, folder name and file name
appear.
Repeats the scroll (5-second
intervals in between).
Cancels scroll mode.
• OFF:
Note:
To select the amplifier gain control
—AMP GAIN
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select “LOW PWR”
to prevent them from being damaged.
When shipped from the factory, “HIGH PWR” is
selected.
Even if the scroll mode is set to “OFF,” you can scroll
the display by pressing DISP (display) for more than
one second.
To select the external component to use
—EXT IN
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
When shipped from the factory, CD changer is
selected as the external component.
• LOW PWR: You can adjust the volume level
from “VOL 00” to “VOL 30.”
Note:
If you change the setting from
“HIGH PWR” to “LOW PWR” while
listening at a volume level more than
30, the unit automatically changes the
volume level to “VOL 30.”
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer.
• HIGH PWR:You can adjust the volume level
from “VOL 00” to “VOL 50.”
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
23
Attaching the control panel
Detaching the control panel
1 Insert the left side of the control
panel into the groove on the panel
holder.
You can detach the control panel when leaving
the car.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel
holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
1 Unlock the control panel.
2 Press the right side of the control
panel to fix it to the panel holder.
2 Lift and pull the control panel out of
the unit.
3 Put the detached control panel into
the provided case.
24
CD CHANGER OPERATIONS
We recommend that you use the JVC MP3-
compatible CD changer with your unit.
Playing discs
By using this CD changer, you can play back
your original CD-Rs (Recordable) and CD-RWs
(Rewritable) recorded either in audio CD format
or in MP3 format.
Select the CD changer (CD-CH).
• You can also connect other CH-X series
CD changers (except CH-X99 and CH-X100).
However, they are not compatible with MP3
discs, so you cannot play back MP3 discs.
• You cannot use the KD-MK series CD
changers with this unit.
* If you have changed “EXT IN” setting to “LINE IN”
(see page 23), you cannot select the CD changer.
• When the current disc is an MP3 disc:
Playback starts from the first folder of the
current disc once file check is completed.
Before operating your CD changer:
• Refer also to the Instructions supplied for
your CD changer.
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO DISC” will appear on the display.
If this happens, remove the magazine and
set the discs correctly.
Selected disc number
• If no magazine is loaded in the CD changer,
“NO MAG” appears on the display. If this
happens, insert the magazine in the CD
changer.
MP3 indicator
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer. If this happens, check the
connection and make sure the cords are
connected firmly. Then, press the reset
button of the CD changer.
(folder) indicator
Selected folder
number
Note:
Folder name appears on the display instead of
“ROOT,” if an MP3 disc contains a folder.
25
• When the current disc is a CD:
Playback starts from the first track of the
current disc.
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the CD
changer is playing).
• To select a disc number from 01 – 06:
Press 1 (7) – 6 (12) briefly.
• To select a disc number from 07 – 12:
Press and hold 1 (7) – 6 (12) for more than
one second.
Selected disc number
To fast-forward or reverse the track/file
Elapsed playing Current track
Press and hold ¢
, during
time
number
play, to fast-forward the track/file.
Notes:
• When you press CD CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
Press and hold
the track/file.
4, during play, to reverse
• If you change the source, CD changer play also
stops. Next time you select the CD changer as the
source, CD changer play starts from where
playback has been stopped previously.
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
• When you start playing back a CD Text or MP3
disc, disc information will automatically appear on
the display. (See pages 15 and 17.)
To skip to the next or previous tracks/files
Press ¢
briefly during play,
to skip ahead to the beginning of
the next track/file.
Each time you press the button
consecutively, the beginning of
the next tracks/files is located
and played back.
Press
4 briefly during play, to skip back to
the beginning of the current track/file.
Each time you press the button consecutively,
the beginning of the previous tracks/files is
located and played back.
26
To skip to the next or previous folder
(only for MP3 discs)
This operation is only possible when
using JVC MP3-compatible CD changer
(CH-X1500).
Press 5 (up) while playing an
MP3 disc, to go to the next folder.
Each time you press the button
consecutively, the next folder is
located, and the first file in the
folder starts playback.
To go to a track/file quickly (+10 and –10
buttons)
1 Press MODE to enter the functions mode
while playing a disc.
Press ∞ (down) while playing an MP3 disc, to go
to the previous folder.
Each time you press the button consecutively,
the previous folder is located, and the first file in
the folder starts playback.
2 Press +10 or –10.
To skip 10 tracks/files* forwards
to the last track/file
To skip 10 tracks/files*
To show the disc information for CD Text
and MP3 discs
This is possible only when connecting a JVC CD
changer equipped with CD Text and/or MP3 disc
information reading capability.
backwards to the first track/file
* First time you press +10 or –10 button, the
track/file skips to the nearest higher or lower
track/file with a track/file number of multiple
ten (ex. 10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks/files (see “How to use the +10
and –10 buttons” below).
• After the last track/file, the first track/file will
be selected, and vice versa.
Select text display mode while playing a
CD Text or an MP3 disc.
Note:
If the current playing disc is an MP3 disc, files are
skipped within the same folder.
• For details, see page 15 about CD Text disc
information and page 17 about MP3 disc
information.
How to use the +10 and –10 buttons
• Ex. 1: To select track/file number 32 while
playing track/file number 6
(Three times)
(Twice)
Track/File 6 \ 10 \ 20 \ 30 \ 31 \ 32
• Ex. 2: To select track/file number 8 while
playing track/file number 36
(Three times)
(Twice)
Track/File 36 \ 30 \ 20 \ 10 \ 9 \ 8
27
To play back tracks/files repeatedly
(Track Repeat/Folder Repeat/Disc Repeat
Play)
Selecting the playback modes
To play back tracks/files at random
(Folder Random/Disc Random/Magazine
Random Play)
1 Press MODE to enter the
functions mode during play.
1 Press MODE to enter the
functions mode during play.
2 Press RPT (repeat), while
“MODE” is still flashing on the
display.
2 Press RND (random), while
“MODE” is still flashing on the
display.
Each time you press the button,
the repeat play mode changes
as follows:
Each time you press the button,
the random play mode changes
as follows:
For MP3 discs:
For CDs:
For MP3 discs:
For CDs:
(disc) and RPT indicators
RND indicator
Ex.: When you select “DISC RPT”
Note:
Ex.: When you select “MAG RND”
MP3 indicator also lights up if the current playing disc
is an MP3 disc.
Note:
MP3 indicator also lights up if the current playing disc
is an MP3 disc.
Active
indicator
Mode
Plays repeatedly
TRK RPT
RPT indicator The current (or
Active
indicator
Mode
Plays at random
lights up.
and RPT
indicators
light up.
specified) track/
file.
FLDR RND* RND and
indicators
All files of the
FLDR RPT*
DISC RPT
All files of the
current (or
specified) folder of
the current disc.
current folder, then
files of the next
folder and so on.
light up.
DISC RND RND and
indicators
All tracks/files of
the current (or
specified) disc.
and RPT
All tracks/files of
indicators light the current (or
up. specified) disc.
light up.
MAG RND RND indicator All tracks/files of
lights up. the inserted discs.
* “FLDR RPT” is only applicable for MP3 discs.
* “FLDR RND” is only applicable for MP3 discs.
28
EXTERNAL COMPONENT OPERATIONS
Playing an external component
2 Turn on the connected component
and start playing the source.
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
3 Adjust the volume.
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 23.
4 Adjust the sound as you want.
(See pages 20 and 21.)
1 Select the external component
(LINE IN).
• If “LINE IN” does not appear on the display, see
page 23 and select the external input (“LINE IN”).
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
on the power.
to turn
29
ADDITIONAL INFORMATION
Playing a CD-R or CD-RW
Playing an MP3 disc
• Use only “finalized” CD-Rs or CD-RWs.
• This unit can play back only the files of the
same type which is first detected if a disc
includes both audio CD (CD-DA) files and MP3
files.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
• This unit can play back MP3 files with the
extension code <.mp3> (regardless of the
letter case—upper/lower).
• This unit can show the names of albums,
artists (performer), and ID3 Tag (Version 1.0,
1.1, 2.2, 2.3, or 2.4) for MP3 files.
• This unit can handle only one-byte characters.
No other characters can be correctly displayed.
• This unit can play back MP3 files meeting the
conditions below:
• Some CD-Rs or CD-RWs may not play back on
this unit because of their disc characteristics,
and for the following causes:
– Bit rate: 8 kbps — 320 kbps
– Discs are dirty or scratched.
– Sampling frequency:
– Moisture condensation on the lens inside the
unit.
– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are written
with “Packet Write” method.
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower than
that of regular CDs.
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
– Disc format: ISO 9660 Level 1/Level 2,
Romeo, Joliet, Windows long file name
• The maximum number of characters for file/
folder names vary among the disc format used
(includes 4 extension characters—<.mp3>).
– ISO 9660 Level 1: up to 12 characters
– ISO 9660 Level 2: up to 31 characters
– Romeo*: up to 128 (72) characters
– Joliet*: up to 64 (36) characters
• Do not use following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly printed
by an ink jet printer.
Using these discs under high temperatures or
high humidity may cause malfunctions or
damage to discs.
– Windows long file name*: up to 128 (72)
characters
* The parenthetic figure is the maximum number of
characters for file/folder names in case the total
number of files and folders is 313 or more.
• This unit can recognize the total of 512 files, of
200 folder, and of 8 hierarchies.
• This unit can play back the files recorded in
VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show the
actual elapsed time. Especially, after
performing the search function, this difference
becomes noticeable.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO
formats.
– MP3 files encoded in an unappropriated
format.
– MP3 files encoded with Layer 1/2.
– Files which have the data such as WMA,
WAVE, ATRAC3, etc.
• The search function works but search speed is
not constant.
30
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• Sound cannot be heard
from the speakers.
The volume level is set to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Check the cords and
connections.
• This unit does not work
at all.
The built-in microcomputer may
have functioned incorrectly due
to noise, etc.
While holding SEL (select),
press
(standby/on
attenuator) for more than
2 seconds to reset the unit.
(Your preset adjustments will
also be erased.) (See page 2.)
• SSM (Strong-station
Sequential Memory)
automatic preset does
not work.
Signals are too weak.
Store stations manually.
• Static noise while
listening to the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
Insert the disc correctly.
• Disc automatically ejects. Disc is inserted upside down.
• CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
played back.
• Tracks on the CD-R/
CD-RW cannot be
skipped.
• Disc can be neither
played back nor ejected.
Disc is locked.
Unlock the disc.
(See page 15.)
The CD player may have
functioned incorrectly.
While holding
(standby/on attenuator), press
0 (eject) for more than
2 seconds. Be careful not to
drop the disc when it is ejected.
• Disc sound is sometimes You are driving on rough roads.
interrupted.
Stop playback while driving on
rough roads.
Disc is scratched.
Change the disc.
Connections are incorrect.
Check the cords and
connections.
• “NO DISC” appears on
the display.
No disc in the loading slot.
Disc is inserted incorrectly.
Insert a disc into the loading slot.
Insert the disc correctly.
31
Symptoms
Causes
Remedies
• Disc cannot be played
back.
No MP3 files are recorded on
the disc.
Change the disc.
MP3 files do not have the
extension code <.mp3> in their
file names.
Add the extension code <.mp3>
to their file names.
MP3 files are not recorded in
the format compliant with ISO
9660 Level 1, Level 2, Romeo,
or Joliet.
Change the disc.
(Record MP3 files using a
compliant application.)
• Noise is generated.
The file played back is not an
MP3 file (although it has the
extension code <.mp3>).
Skip to another file or change
the disc. (Do not add the
extension code <.mp3> to non-
MP3 files.)
• A longer readout time is
required (“CHECK”
keeps flashing on the
display).
Readout time varies due to the
complexity of the folder/file
configuration.
Do not use too many hierarchies
and folders. Also, do not record
any other types of audio tracks
together with MP3 files.
• Files cannot be played
back as you have
Playback order is determined
when the files are recorded.
intended them to play.
• Elapsed playing time is
not correct.
This sometimes occurs during
play. This is caused by how the
files are recorded on the disc.
•
indicator flashes on
the display.
The current folder does not
contain any MP3 file.
Select another folder.
• “NO FILES” appears on
the display.
The current disc does not
contain any MP3 file.
Insert a disc that contains MP3
files.
• Correct characters are
This unit can only display
not displayed (e.g. album alphabets (capital: A–Z),
name).
numbers, and a limited number
of symbols.
32
Symptoms
Causes
Remedies
• “NO DISC” appears on the
display.
No disc is in the magazine.
Insert discs into the
magazine.
Discs are inserted upside down.
Insert discs correctly.
Insert the magazine.
• “NO MAG” appears on the
display.
No magazine is loaded in the
CD changer.
• “RESET 8” appears on the
display.
This unit is not connected to the Connect this unit and the
CD changer correctly.
CD changer correctly and
press the reset button of
the CD changer.
• “RESET 1” – “RESET 7”
appears on the display.
Press the reset button of
the CD changer.
• The CD changer does not
work at all.
The built-in microcomputer may
function incorrectly due to noise, press
etc.
While holding SEL (select),
(standby/on
attenuator) for more than 2
seconds to reset the unit.
(Your preset adjustments
will also be erased.) (See
page 2.)
About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,
but will be annoying.
We recommend that you stop disc play while driving on such rough roads.
33
MAINTENANCE
How to clean the connectors
To keep discs clean
Frequent detachment will deteriorate the
connectors.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened
with alcohol, being careful not to damage the
connectors.
A dirty disc may not be played
correctly. If a disc does become
dirty, wipe it with a soft cloth in a
straight line from center to edge.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub
the edges with a pencil or ball-point pen, etc.
Connector
CAUTIONS:
Do not insert the following discs into the loading
slot:
– 8 cm discs (single CD)
– Unusual shape—heart, flower, etc.
Moisture condensation
Moisture may condense on the lens inside the
CD player in the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the CD player may
malfunction. In this case, eject the disc and leave
the unit turned on for a few hours until the
moisture evaporates.
How to handle discs
When removing a disc
from its case, press down
the center holder of the case
and lift the disc out, holding
it by the edges.
Center holder
• Always hold the disc by the edges. Do not
touch its recording surface.
When storing a disc into its case, gently insert
the disc around the center holder (with the
printed surface facing up).
• Make sure to store discs into the cases after
use.
Do not use the following discs:
Sticker
Stick-on
Sticker
residue
Warped
disc
Disc
label
34
SPECIFICATIONS
CD PLAYER SECTION
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Type: Compact disc player
Front: 50 W per channel
Rear: 50 W per channel
Signal Detection System: Non-contact optical
pickup (semiconductor laser)
Continuous Power Output (RMS):
Front: 19 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8%
total harmonic distortion.
Number of channels: 2 channels (stereo)
Frequency Response: 5 Hz to 20 000 Hz
Dynamic Range:
96 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: Less than measurable limit
MP3 decoding format:
Rear: 19 W per channel into 4 Ω, 40 Hz to
20 000 Hz at no more than 0.8%
total harmonic distortion.
MPEG 1/2 Audio Layer 3
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range
Max. Bit Rate:
320 Kbps
Bass:
10 dB at 100 Hz
Treble: 10 dB at 10 kHz
Frequency Response: 40 Hz to 20 000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
2.0 V/20 kΩ load (full scale)
Output Impedance: 1 kΩ
GENERAL
Power Requirement
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°C to +40°C
Output terminals: CD changer
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 150 mm
Panel Size (approx.):
TUNER SECTION
Frequency Range
FM:
AM:
87.5 MHz to 108.0 MHz
531 kHz to 1 602 kHz
188 mm × 58 mm × 11 mm
Mass (approx.):
1.4 kg (excluding accessories)
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Design and specifications are subject to change
without notice.
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 35 dB
Capture Ratio: 1.5 dB
[AM Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
35
EN, TH
1004DTSMDTJEIN
© 2004 Victor Company of Japan, Limited
KD-G456
Installation/Connection Manual
°“√µ¥µß/§¡Õ°“√µ¥µß
GET0291-002A
[UH]
1004DTSMDTJEIN
EN, TH
ENGLISH
‰∑¬
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your
vehicle does not have this system, a voltage inverter is required, which can be purchased at
JVC car audio dealers.
™¥¢¢ª√–°Õ∫π‰¥√∫°“√ÕÕ°·∫∫¡“‡æÕ„™ß“π°∫√–∫∫ °√–·‰øø““¬¥π¢«≈∫°√–·µ√ß 12 ‚«≈∑ À“°√∂¬πµ¢Õߧ≥‰¡‰
¥„™√–∫∫π µÕß„™‡§√Õß·ª≈ß°√–·‰ø™«¬ ´ß“¡“√∂À“´Õ‰¥®“°√“π¢“¬‡§√Õ߇¬ß√∂¬πµ JVC
Parts list for installation and connection
The following parts are provided for this unit.
After checking them, please set them correctly.
√“¬°“√«πª√–°Õ∫”À√∫µ¥µß·≈–‡™Õ¡µÕ°π
«πª√–°Õ∫µÕ‰ªπ„À¡“°∫™¥ª√–°Õ∫π À≈ß®“°µ√«® Õ∫·≈« ª√∫µß‡§√Õß„À∂°µÕß
A / B
C
D
E
F
Hard case/Control panel
Sleeve
Trim plate
Power cord
Washer (ø5)
≈ß∫√√®/À𓪥
ª≈Õ°À¡
·ºπ‚≈À–¢Õ∫·µß
“¬‡§‡∫≈°”≈ß
ª√–‡°π«ß·À«π (ø5)
G
H
I
J
K
L
Lock nut (M5)
Mounting bolt (M5 x 20 mm)
Rubber cushion
Handles
Remote controller
Battery
CR2025
πÕµ≈Õ§ (M5)
≈°µ¥ (M5 x 20 ¡≈≈‡¡µ√)
¬“ß°π°√–·∑°
§π∫ߧ∫
√‚¡µ§Õπ‚∑√≈
·∫µ‡µÕ√
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your JVC car audio dealer or a company supplying
kits.
°“√µ¥µß (°“√ª√–°Õ∫·ºßÀπ“ª∑¡‡¢“)
¿“浫լ“ßµÕ‰ªπ·¥ß∂ß°“√µ¥µß·∫∫∑«‰ª À“°§≥¡ª≠À“À√ÕµÕß°“√¢Õ¡≈‡°¬«°∫™¥µ¥µß °√≥“ª√°…“°
∫º¢“¬‡§√Õ߇¬ß√∂¬πµ JVC ¢Õß∑“πÀ√Õ∫√…
•
™¥ª√–°Õ∫ ∂“§≥‰¡·π„®«“µ¥µß™¥ª√–°Õ∫π∂°µÕßÀ√Õ‰¡ „ÀÀ“™“ߺ‡™¬«™“≠‡ªπºµ¥µß
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Do the required electrical connections.
µÕ“¬‰øµ“¡∑°”À𥉫∑ßÀ¡¥
1
*
*
When you stand the unit, be
careful not to damage the fuse on
the rear.
‡¡Õ§≥µß™¥ª√–°Õ∫¢π √–«
ßÕ¬“∑”„Àø« ∫√‡«≥ «π∑“¬‡ ¬À“¬
Bend the appropriate tabs to hold
the sleeve firmly in place.
ßÕ·ºπ‡æÕ¬¥ª≈Õ°„ÀµÕ°π‡¢“∑
1
Removing the unit / °“√∂Õ¥™¥ª√–°Õ∫
Before removing the unit, release the rear section.
°Õπ®–∂Õ¥™¥ª√–°Õ∫ „Àª≈¥Àπ“µ¥«π∑“¬°Õπ
When using the optional stay /
When installing the unit without using the sleeve /
‡¡Õµ¥µß™¥ª√–°Õ∫‚¥¬‰¡„™ª≈Õ°À¡
First remove the car radio and install the unit in its place.
‡¡Õ„™µ«¬¥·∫∫‡≈Õ°‰¥
Stay (option)
Fire wall
µ«¬¥ (‡≈Õ°‰¥)
ºπß°π‰ø
°ÕπÕπ¢Õ„À∂Õ¥™¥‡§√Õ߇ ¬ß√∂¬πµÕÕ° ·≈«µ¥µß‡§√Õ߇¢“∑
Flat type screws
(M5 x 8 mm)*
* Not included with this unit.
Dashboard
*
‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π
Bracket*
·ºßÀπ“ª∑¡
°√À«‡√¬∫
(M5 x 8 ¡≈≈‡¡µ√)*
Screw (option)
·∑π√Õß√∫*
Flat type screws
(M5 x 8 mm)*
°√ (‡≈Õ°‰¥)
°√À«‡√¬∫
(M5 x 8 ¡≈≈‡¡µ√)*
Pocket
Bracket*
°–‡ª“–
Insert the two handles, then pull
them as illustrated so that the unit
can be removed.
·∑π√Õß√∫*
Note
: When installing the unit on the mounting bracket, make sure to use
the 8 mm-long screws. If longer screws are used, they could
damage the unit.
Install the unit at an angle of
less than 30˚.
„§π∫ߧ∫
2
Õπ≈ß„π√Õß”À√∫„™æπ≈«¥ ¥ß¿“æ
®“°ππ „À‡≈Õ𙥪√–°Õ∫ÕÕ° „π¢≥–∑§Õ¬
ʥߧπ∫ߧ∫∑ß Õß ÕπÕÕ°®“°°π
À¡“¬‡Àµ : ‡¡Õµ¥µß™¥ª√–°Õ∫≈ß„π·∑π√Õß√∫‰« „À„™°√¬“«¢π“¥ 8 ¡≈≈‡¡µ√
µ¥µß™¥ª√–°Õ∫∑¡¡µ”°«“ 30 Õß»“
∂“„™°√¬“«°«“πÕ“®∑”„À™¥ª√–°Õ∫‡¬À“¬‰¥
PRECAUTIONS on power supply and speaker
connections:
• DO NOT connect the speaker leads of the power cord to the
car battery; otherwise, the unit will be seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the
speakers, check the speaker wiring in your car.
¢Õ§«√√–«ß”À√∫°“√µÕ·À≈ß®“¬°”≈ß·≈–≈”‚æß:
•
Õ¬“µÕ “¬µ–°«‡§‡∫≈°”≈ߢÕß≈”‚æ߇¢“°∫·∫µ‡µÕ√√∂¬πµ ¡©–π𠙥ª√–°Õ∫®–‰¥√
∫§«“¡‡ ¬À“¬¡“°
• °Õπ∑®–µÕ“¬µ–°«‡§‡∫≈°”≈ߢÕß≈”‚æ߇¢“°∫≈”‚æß
„Àµ√«®Õ∫°“√‡¥π“¬‰ø≈”‚æß„π√∂¢Õߧ≥„À‡√¬∫√Õ¬‡¬°Õπ
TROUBLESHOOTING
°“√µ√«®Õ∫ª≠À“¢¥¢Õß
• ø« ¢“¥
• The fuse blows.
* Are the red and black leads connected correctly?
* ¡°“√‡™Õ¡ “¬µ–°« ¥”·≈– ·¥ßÕ¬“ß∂°µÕßÀ√Õ‰¡
• Power cannot be turned on.
* Is the yellow lead connected?
• ‰¡ “¡“√∂‡ª¥‡§√Õ߉¥
* ¡°“√‡™Õ¡ “¬µ–°« ‡À≈ÕßÀ√Õ‰¡
• No sound from the speakers.
* Is the speaker output lead short-circuited?
• ‰¡¡‡ ¬ßÕÕ°®“°≈”‚æß
* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æ߇°¥‰øø“≈¥«ß®√À√Õ‰¡
• Sound is distorted.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
• ‡ ¬ß‡æ¬π
* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æßµÕ≈ߥπÀ√Õ‰¡
* “¬¢«≈∫ “–” ¢Õß≈”‚æߥ“π´“¬·≈–¢«“µÕ≈ß¥πµ“¡ª°µÀ√Õ‰¡
• Noise interfere with sounds.
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?
• ‡ ¬ß√∫°«π
* ¡°“√„™ “¬ πÊ À√ÕÀπ“Ê µÕ®“°‡§√Õß «π∑µ¥µß ‰«∫πæπ¥“πÀ≈ß°∫µ«∂ß√∂¬πµÀ√Õ‰¡
• ™¥ª√–°Õ∫√Õπ¢π
• Unit becomes hot.
* Is the speaker output lead grounded?
* Are the “–” terminals of L and R speakers grounded in common?
* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æßµÕ≈ߥπÀ√Õ‰¡
* “¬¢«≈∫ “–” ¢Õß≈”‚æߥ“π´“¬·≈–¢«“µÕ≈ß¥πµ“¡ª°µÀ√Õ‰¡
• ‡§√•Õß„™ß“π‰¡‰¥‡ ¬
• This unit does not work at all.
* Have you reset your unit?
1 * ∑“π‰¥µß‡§√Õß„À¡À√Õ¬ß
ENGLISH
‰∑¬
ELECTRICAL CONNECTIONS
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and
make all electrical connections before installing the unit.
°“√‡™Õ¡‚¥¬„™‰øø“
‡æÕªÕß°π°“√‡°¥‰øø“≈¥«ß®√ ¢Õ·π–π”„Àª≈¥¢«·∫µ‡µÕ√≈∫ÕÕ° ·≈«®ßµÕ“¬‰ø°Õπµ¥µß‡§√Õß
• µ√«® Õ∫„À·π„®«“‰¥‡¥π “¬¥πµÕ√–À«“߇§√Õß°∫µ«∂ß √∂¬πµ„À¡·≈«À≈ß®“°µ¥µß
• Be sure to ground this unit to the car’s chassis again after installation.
Notes:
À¡“¬‡Àµ:
• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your
JVC car audio dealer.
• „™æ°¥®”‡æ“–·∑πø« À“°ø«¢“¥∫Õ¬ „Àª√°…“√“ π¢“¬‡§√Õ߇¬ß√∂¬πµ JVC
• ¢Õ·π–π”„ÀµÕ≈”‚æß ∑¡°”≈ߢ∫ß ¥‡°π°«“ 50 W (∑ߥ“πÀπ“·≈–¥“πÀ≈ß ¡§“§«“¡µ“π∑“π 4 Ω ∂ß 8 Ω)
∂“°”≈ߢ∫µ”°«“ 50 W „À‡ª≈¬π§“ “AMP GAIN” ‡æÕªÕß°π‰¡„À≈”‚æß™”√¥ (¥Àπ“ 23 §”·π–π”)
• °“√ªÕß°π°“√≈¥«ß®√ ®–µÕßæ㛮 “¬µ–°« ∑‰¡„™·≈«¥«¬‡∑ ªæ𠓬‰ø
• ·ºπ√–∫“¬§«“¡√Õπ®–√Õπ¡“°À≈ß®“°„™ √–¡¥√–«ßÕ¬“‰ª ¡º‡¡Õ∂Õ¥™¥ª√–°Õ∫π
• It is recommended to connect to the speakers with maximum power of more than 50 W (both at
the rear and at the front, with an impedance of 4 Ω to 8 Ω). If the maximum power is less than
50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see page 23 of
the INSTRUCTIONS).
• To prevent short-circuit, cover the terminals of the UNUSED
leads with insulating tape.
• The heat sink becomes very hot after use. Be
careful not to touch it when removing this unit.
Heat sink
·ºπ√–∫“¬§«“¡√Õπ
A
Typical Connections / °“√‡™Õ¡µÕ·∫∫ª°µ
°Õ•∑”°“•‡™•Õ¡µÕ: µ•«®†Õ•°“•‡¥•†“¬‰ø„•••¬•µÕ¬“ß•–¡¥•–«Õ¬“„Àº¥æ•“¥„•°“•‡™•Õ¡µÕ™¥ª•–°Õ•™¥•
°“•‡™•Õ¡µÕº¥æ•“¥Õ“®∑”„À‡°¥§«“¡‡ ¬À“¬•“¬·•ß°•™¥ª•–
°Õ••‰¥“•µ–°«¢Õ߆“¬‰ø ·•–¢ÕßÕª°••µÕ‡™•Õ¡®“°µ«• ß••Õ“®¡†∑‰¡‡À¡•Õ•°•
1 µÕ “¬‰øµ“¡≈”¥∫∑√–∫„π√ª¥“π≈“ß
2 ‡™Õ¡µÕ°∫“¬Õ“°“»
3 ¥∑“¬ µÕ «π§«∫§¡°“√‡¥π “¬‰ø‡¢“°∫™¥ª√–°Õ∫™¥π
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause
serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in
color.
1 Connect the colored leads of the power cord in the order specified in the illustration below.
2 Connect the antenna cord.
3 Finally connect the wiring harness to the unit.
To CD changer jack or another external component (see diagram
)
™Õ߇ ¬∫µÕ¢Õ߇§√Õ߇≈π´¥ CD ≈À–Õª°√≥¿“¬πÕ° (¥·ºπ¿¡ )
Rear ground terminal
®¥‡™Õ¡µÕ “¬¥π¥“πÀ≈ß
15 A fuse
ø« ¢π“¥ 15 A
1
*
Not included with this unit
Ignition switch
Line out
(see diagram
*1 ‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π
Antenna terminal
)
«∑™®¥√–‡∫¥
¢« “¬Õ“°“»
Black
“¬ÕÕ° (¥·ºπ¿¡
)
¥”
To metallic body or chassis of the car
µÕ°∫‚§√ß‚≈À–À√Õ‡™´ ¢Õß√∂¬πµ
Yellow*2
‡À≈Õß*2
To a live terminal in the fuse block connecting to the car battery
(bypassing the ignition switch) (constant 12 V)
µÕ°∫¢«∑¡°√–·‰øø“„π·ºßø« ´ßµÕ°∫·∫µ‡µÕ√√∂¬πµ (‚¥¬‰¡µÕß„™« ∑™®¥√–‡∫¥)
Red
‡‡¥ß
(12 ‚«≈∑§ß∑)
To an accessory terminal in the fuse block
µÕ°∫¢« «πª√–°Õ∫„π·ºßø«
2
*
Before checking the operation of this unit prior to
installation, this lead must be connected, otherwise
power cannot be turned on.
Fuse block
Blue with white stripe
·ºßø«
π”‡ßπ≈“¬¢“«
To the remote lead of other equipment or automatic antenna if any (200 mA max.)
*2 °Õπ°“√µ√«®Õ∫°“√∑”ß“π¢Õß™¥ª√–°Õ∫π°Õπ∑®–µ¥µß
)
µÕ “¬°∫Õª°√≥ÕπÀ√Õ‡ “Õ“°“»Õµ‚π¡µ∂“¡ (¢π“¥ ß ¥ 200 mA
µÕßµÕ“¬µ–°«π°Õπ ¡©–ππ®–‰¡“¡“√∂‡ª¥‡§√Õ߉¥
White with black stripe
White Gray with black stripe
Gray
Green with black stripe
Green
Purple with black stripe
Purple
¢“«·∂∫¥”
¢“«
‡∑“·∂∫¥”
‡∑“
‡¢¬«·∂∫¥”
‡¢¬«
¡«ß·∂∫¥”
¡«ß
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
≈”‚æß´“¬ (Àπ“)
≈”‚æߢ«“ (Àπ“)
≈”‚æß´“¬ (À≈ß)
≈”‚æߢ«“ (À≈ß)
B
Connections Adding Other Equipment / °“√µÕ‡æ¡‡µ¡‡¢“°∫Õª°√≥Õπ
Amplifier / ‡§√Õߢ¬“¬
You can connect an amplifier and other equipment to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so
that it can be controlled through this unit.
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker
leads of this unit unused.
§≥“¡“√∂µÕ°∫·Õ¡æ≈ø“¬‡ÕÕ√ · –Õª°√≥Õπʉ¥ ‡æՇ桧≥ ¿“æ‡ ¬ß„À°∫√–∫∫ ‡µÕ√‚Õ¢Õß√∂¬πµ
• µÕ “¬µ–°«√–¬–‰°≈ ( π”‡ßπ≈“¬¢“«) ‡¢“°∫ “¬µ–°«√–¬–‰°≈¢ÕßÕª°√≥Õπ Ê ‡æÕ®– “¡“√∂§«∫§¡‚¥¬™¥ª√–°Õ∫π‰¥
• ∂Õ¥≈”‚æßÕÕ°®“°™¥ª√–°Õ∫π ·≈«µÕ‡¢“°∫‡§√Õߢ¬“¬ ∑ß“¬µ–°«≈”‚æߢÕß™¥ª√–°Õ∫π‰«
Rear speakers
Y-connector (not supplied for this unit)
Remote lead
≈”‚æßÀ≈ß
¢ÕµÕ√ªµ« Y (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)
“¬µ–°«•–¬–‰°•
JVC Amplifier
‡§√Õߢ¬“¬‡¬ß JVC
3
Remote lead (Blue with white stripe)
*
Firmly attach the ground wire to the metallic body
or to the chassis of the car—to the place not
coated with paint (if coated with paint, remove the
paint before attaching the wire). Failure to do so
may cause damage to the unit.
“¬µ–°«•–¬–‰°• ( π”‡ßπ≈“¬¢“«)
To the remote lead of other equipment or automatic
antenna if any
*3 µÕ≈«¥“¬¥π„À·ππ‡¢“°∫µ«∂߇À≈° À√Õµ«∂ß√∂—µ√ß«π
∑‰¡¡ ‡§≈Õ∫ (À“°¡‡§≈Õ∫Õ¬ „À¢¥ ÕÕ°°Õπ
°ÕπµÕ≈«¥“¬¥π) À“°‰¡ªØ∫µµ“¡§”·π–π”π
‡§√ÕßÕ“®™”√¥À√Õ‡¬À“¬‰¥
KD-G456
µÕ “¬°∫Õª°√≥ÕπÀ√Õ‡ “Õ“°“»Õµ‚π¡µ∂“¡
Signal cord (not supplied for this unit)
Front speakers
“¬‡§‡∫≈ ≠≠“≥ (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)
≈”‚æßÀπ“
External Component / Õª°√≥¿“¬πÕ°
CD Changer / ‡§√Õ߇≈π´¥ CD
Refer also to page 25 of the INSTRUCTIONS.
¥¢Õ·π–π”„πÀπ“ 25
KS-U57 *4
External component
L
L
L
L
Connecting cord supplied for your CD changer
“¬µÕ„À¡“æ√Õ¡‡§√Õ߇≈π´¥
R
Õª°√≥¿“¬πÕ°
R
R
R
KD-G456
Signal cord (not supplied with this unit)
CAUTION / ¢Õ§«√√–«ß
“¬‡§‡∫≈ ≠≠“≥ (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)
CD changer jack
• Before connecting the CD changer,
make sure that the unit is turned off.
4
JVC CD changer
‡§√Õ߇≈π´¥ JVC
™Õ߇ ¬∫µÕ¢Õ߇§√Õ߇≈π´¥ CD
*
Line Input Adapter KS-U57 (not
supplied for this unit)
*4 Õ·¥ª‡µÕ√ “¬ ≠≠“≥‡¢“
• °Õπ®–‡™Õ¡µÕ‡§√Õ߇≈π´¥ °√≥“µ√«®
Õ∫„À·π„®«“‡§√Õ߇≈π´¥ππª¥Õ¬
KS-U57 (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)
KD-G456
2
|