JVC Everio GZ HD6 User Manual

EN  
GUIDEBOOK  
HD HARD DISK CAMCORDER  
U
GZ-HD5  
GZ-HD6  
U
Dear Customers  
Thank you for purchasing  
this hard disk camera. Before  
use, please read the safety  
information and precautions  
contained on pages 4 and 5 to  
ensure safe use of this product.  
For Future Reference:  
Enter the Model No. (located on  
the bottom of the camera) and  
Serial No. (located on the battery  
pack mount of the camera)  
below.  
Model No.  
Serial No.  
The camera illustrations appearing in this  
instruction manual are of the GZ-HD6.  
Back Up High-Definition Images  
on DVD Discs!  
Video can easily be backed up on a DVD disc by connecting to  
a separate DVD burner (CU-VD40).  
This DVD disc can then be played in the camera or a PC, but  
not in a DVD player.  
If a CU-VD40 is used, the DVD burner can be connected  
directly to a television so the disc can be played without using  
the camera.  
Edit High-Definition Images on a  
PC!  
Perform advanced editing on high-definition images by loading to  
a PC.  
3
Safety Precautions  
When the equipment is installed in a cabinet or on  
a shelf, make sure that it has sufficient space on  
all sides to allow for ventilation (10 cm (3-15/16")  
or more on both sides, on top and at the rear).  
Do not block the ventilation holes.  
(If the ventilation holes are blocked by a  
newspaper, or cloth etc. the heat may not be able  
to get out.)  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
When discarding batteries, environmental  
problems must be considered and the local rules  
or laws governing the disposal of these batteries  
must be followed strictly.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated "dangerous voltage" within the  
product's enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in  
the literature accompanying the appliance.  
The apparatus shall not be exposed to dripping  
or splashing.  
Do not use this equipment in a bathroom or  
places with water.  
Also do not place any containers filled with water  
or liquids (such as cosmetics or medicines, flower  
vases, potted plants, cups etc.) on top of this unit.  
(If water or liquid is allowed to enter this  
equipment, fire or electric shock may be caused.)  
WARNING:TO PREVENT FIRE OR  
SHOCK HAZARD, DO NOT EXPOSE THIS  
UNIT TO RAIN OR MOISTURE.  
NOTES:  
The rating plate and safety caution are on the  
bottom and/or the back of the main unit.  
Do not point the lens directly into the sun. This  
can cause eye injuries, as well as lead to the  
malfunctioning of internal circuitry. There is also a  
risk of fire or electric shock.  
The serial number plate is on the battery pack  
mount.  
The rating information and safety caution of the  
AC adapter are on its upper and lower sides.  
CAUTION!  
The following notes concern possible physical  
damage to the camera and to the user.  
Carrying or holding the camera by the LCD monitor  
can result in dropping the unit, or in a malfunction.  
Do not use a tripod on unsteady or unlevel surfaces.  
It could tip over, causing serious damage to the  
camera.  
Caution on Replaceable lithium battery  
The battery used in this device may present a fire  
or chemical burn hazard if mistreated.  
Do not recharge, disassemble, heat above 100°C  
or incinerate.  
Replace battery with Panasonic (Matsushita  
Electric), Sanyo, Sony or Maxell CR2025.  
Danger of explosion or Risk of fire if the battery is  
incorrectly replaced.  
CAUTION!  
Connecting cables (Audio/Video, S-Video, etc.)  
to the camera and leaving it on top of the TV is  
not recommended, as tripping on the cables will  
cause the camera to fall, resulting in damage.  
Dispose of used battery promptly.  
Keep away from children.  
Do not disassemble and do not dispose of in  
fire.  
CAUTION:  
For USA-California Only  
The mains plug shall remain readily operable.  
This product contains a CR Coin Cell Lithium  
Battery which contains Perchlorate Material  
– special handling may apply.  
WARNING:  
Batteries, including lithium batteries installed in  
the camera and the remote control, should not  
be exposed to excessive heat such as direct  
sunshine, fire or the like.  
4
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
Remember that this camera is intended for  
private consumer use only.  
Any commercial use without proper permission  
is prohibited. (Even if you record an event such  
as a show, performance or exhibition for personal  
enjoyment, it is strongly recommended that you  
obtain permission beforehand.)  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
Trademarks  
7. Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9. Only use attachments/accessories specified by  
the manufacturer.  
10.Use only with the cart,  
i.LINK is a trademark of Sony  
Corporation.  
x.v.ColorTM is a trademark of  
Sony Corporation.  
HDMI is a trademark of HDMI  
Licensing, LLC.  
Windows® is either registered  
trademark or trademark of Microsoft Corporation  
in the United States and/or other countries.  
Macintosh is a registered trademark of Apple  
Inc.  
stand, tripod, bracket,  
or table specified by  
the manufacturer,  
or sold with the  
Other product and company names included  
in this instruction manual are trademarks  
and/or registered trademarks of their respective  
holders.  
apparatus. When a cart  
is used, use caution  
when moving the  
cart/apparatus combination to avoid injury from  
tip-over.  
11.Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
12.Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
If this symbol is shown, it is only  
valid in the European Union.  
5
JVC Software License Agreement  
4 LIMITED WARRANTY  
JVC SOFTWARE LICENSE AGREEMENT  
JVC warrants that any media in which the  
Program is embodied are free from any defects  
in materials and workmanship for a period of  
thirty (30) days from the date of Your purchasing  
any our products accompanying the Program.  
JVC’s entire liability and your exclusive remedy  
in connection with the Program shall be  
IMPORTANT  
TO CUSTOMERS: PLEASE MAKE SURE TO  
READ THIS CAREFULLY BEFORE INSTALLING  
OR USING THE SOFTWARE PROGRAM  
NAMED “DIGITAL PHOTO NAVIGATOR”  
(“Program”) ON YOUR PC.  
replacement of such defective media. EXCEPT  
FOR THE EXPRESS WARRANTIES STATED  
HEREIN AND TO THE EXTENT PERMITTED BY  
APPLICABLE LAW, JVC AND ITS LICENSORS  
DISCLAIM ANY OTHER WARRANTIES, EITHER  
EXPRESS OR IMPLIED, INCLUDING BUT  
NOT LIMITED TO IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE IN REGARD TO  
THE PROGRAM AND THE ACCOMPANYING  
PRINTED MATERIALS. SHOULD THERE BE  
ANY PROBLEM ARISING FROM OR CAUSED  
BY THE PROGRAM, YOU SHOULD SETTLE  
ALL SUCH PROBLEM AT YOUR OWN COST  
AND EXPENSE.  
The right to use the Program is granted by Victor  
Company of Japan, Limited (“JVC”) to You only  
on the condition that You agree to the following.  
Should You not agree to the terms hereof, You  
may not install or use the Program. HOWEVER,  
INSTALLING OR USING THE PROGRAM  
INDICATES YOUR ACCEPTANCE OF THESE  
TERMS AND CONDITIONS.  
1 COPYRIGHT; OWNERSHIP  
You acknowledge that all copyrights and other  
intellectual property rights in the Program are  
owned by JVC and its licensor, and remain  
vested in JVC and such licensor. The Program is  
protected under the copyright law of Japan and  
other countries, and related Conventions.  
5 LIMITED LIABILITY  
TO THE EXTENT PERMITTED BY APPLICABLE  
LAW, IN NO EVENT SHALL JVC AND ITS  
LICENSORS BE LIABLE FOR ANY INDIRECT,  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES WHATSOEVER, REGARDLESS  
OF THE FORM OF ACTION WHETHER IN  
CONTRACT, TORT OR OTHERWISE ARISING  
OUT OF OR IN CONNECTION WITH THE USE  
OF OR INABILITY TO USE THE PROGRAM,  
EVEN IF JVC HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES.YOU  
WILL INDEMNIFY AND HOLD HARMLESS  
JVC FROM ANY LOSS, LIABILITY OR  
COST ARISING OUT OF OR IN ANY WAY  
CONNECTED TO CLAIMS FROM ANY THIRD  
PARTY RELATING TO THE USE OF THE  
PROGRAM.  
2 GRANT OF LICENSE  
(1) Subject to the conditions of this Agreement,  
JVC grants to You a non-exclusive right to  
use the Program.You may install and use the  
Program on a HDD or other storage devices  
incorporated in Your PC.  
(2) You may make one (1) copy of the Program  
solely for your personal backup or archival  
purposes.  
3 RESTRICTION ON THE PROGRAM  
(1) You may not reverse engineer, decompile,  
disassemble, revise or modify the Program,  
except to the extent that expressly permitted  
by applicable law.  
(2) You may not copy or use the Program, in  
whole or in part, other than as expressly  
specified in this Agreement.  
(3) You have no right to grant a license to use the  
Program, and may not distribute, rent, lease  
or transfer the Program to any third party or  
otherwise let them use the Program.  
6
NOTE  
6 TERM  
If You acquired the Program in Germany, the  
provisions of Sections 4 (Limited Warranty)  
and 5 (Limited Liability) provided above will be  
replaced with those of the German version of this  
Agreement.  
This Agreement will become effective on the date  
when You install and use the Program on Your  
machine, and continue to be in effect until the  
termination under the following provision.  
Should You breach any provision of this  
Agreement, JVC may terminate this Agreement  
without giving any notice to You. In this event,  
JVC may claim against You for any damages  
caused by Your breach. Should this Agreement  
be terminated, You must immediately destroy the  
Program stored in Your machine (including the  
erasing from any memory in Your PC), and no  
longer own such Program.  
CAUTION:  
Operate this equipment according to the  
operating procedures described in this manual.  
Use only the provided CD-ROM. Never use any  
other CD-ROM to run this software.  
Do not attempt to modify this software.  
Changes or modifications not approved by  
JVC could void user’s authority to operate the  
equipment.  
7 EXPORT CONTROL  
You agree that You will not ship, transfer or  
export the Program or underlying information  
and technology to any countries to which Japan  
and other relevant countries have initiated an  
embargo on such goods.  
How to handle a CD-ROM  
Take care not to soil or scratch the mirror  
surface (opposite to the printed surface). Do  
not write anything or put a sticker on either  
the front or back surface. If the CD-ROM  
gets dirty, gently wipe it with a soft cloth  
outward from the center hole.  
8 U.S. GOVERNMENT USER  
If You are an agency of the United States of  
America (the “Government”), You acknowledge  
JVC’s representation that the Program is  
a “Commercial Item” as defined in Federal  
Acquisition Regulation (FAR) part 2.101 (g)  
consisting unpublished “Commercial Computer  
Software” as those items are used at FAR part  
12.212 and is only licensed to You with the same  
use rights JVC grants all commercial end users  
pursuant to the terms of this Agreement.  
Do not use conventional disc cleaners or  
cleaning spray.  
Do not bend the CD-ROM or touch its mirror  
surface.  
Do not store your CD-ROM in a dusty, hot or  
humid environment. Keep it away from direct  
sunlight.  
You can find the latest information (in  
English) on the provided software program at  
victor.co.jp/english/global-e.html  
9 GENERAL  
(1) No modification, change, addition, deletion or  
other alternation of or to this Agreement will  
be valid unless reduced to writing and signed  
by an authorized representative of JVC.  
(2) If any part of this Agreement is held invalid by  
or in conflict with any law having jurisdiction  
over this Agreement, the remaining  
provisions will remain in full force and effect.  
(3) This Agreement shall be governed by and  
interpreted under the laws of Japan. The  
Tokyo District Court has jurisdiction over all  
disputes which may arise with respect to the  
execution, interpretation and performance of  
this Agreement.  
Victor Company of Japan, Limited  
7
Contents  
GETTING STARTED  
PLAYBACK  
Accessories .......................................... 10  
Playing Back Files................................ 29  
Attaching/Detaching the Lens Hood............10  
Attaching the Shoulder Strap.......................11  
Preparing the Remote Control.....................11  
Attaching the Core Filter to the DC Cord.....11  
Index ...................................................... 12  
Indications on LCD Monitor................. 14  
Necessary Settings before Use........... 16  
Charging the Battery Pack...........................16  
Language Setting ........................................17  
Date/Time Setting........................................17  
Other Settings....................................... 18  
Video Playback ...........................................29  
Still Image Playback ...................................30  
File Search Function....................................31  
To Play Back TPD Files ..............................32  
Playback with Special Effects......................32  
Watching Images on TV........................ 35  
Connection with TV......................................35  
Playback Operation .....................................36  
EDITING/PRINTING  
Grip Adjustment...........................................18  
Tripod Mounting...........................................18  
When Using a microSD Card ......................18  
Managing Files...................................... 37  
Deleting/Protecting Files..............................37  
Viewing File Information ..............................39  
Changing the Event Registration of Video  
Files after Recording ................................40  
To Extract a Still Image File from  
RECORDING  
a Video File ..............................................40  
DPOF Print Setting .....................................41  
Playlists ................................................ 43  
Creating Playlists ........................................43  
Playing Back Playlists..................................44  
Other Operations of Playlists.......................45  
Recording Files..................................... 20  
Video Recording..........................................20  
Still Image Recording ..................................21  
Zooming.......................................................22  
Registering Files to Events..........................22  
Checking the Remaining Space on the  
Recording Media ......................................23  
Checking the Remaining Battery Power......23  
Manual Recording ............................... 24  
COPYING  
To Change to Manual Recording Mode.......24  
Program AE.................................................24  
Manual Focus..............................................25  
Nightalive.....................................................25  
Backlight Compensation..............................25  
Spot Exposure Control ................................26  
Manual Setting in Function Menu................26  
Copying Files........................................ 46  
Using a DVD Burner to Copy Files from the  
Camera.....................................................46  
Using a VCR/DVD Recorder to Dub Files  
from the Camera.......................................49  
Copying/Moving Still Image Files.................51  
8
PC OPERATION  
Read This First!  
File Backup on a Windows® PC ........... 52  
Make a backup of important recorded data  
It is recommended to copy your important  
recorded data to a DVD or other recording  
media for storage. (p. 46) JVC will not be  
responsible for any lost data.  
System Requirements .................................52  
Software Installation ....................................53  
Connecting the Camera to the PC...............55  
File Backup on the PC.................................56  
File Backup on the PC without Using  
Software....................................................57  
Other Windows® PC Operations .......... 58  
Playing Back Files on the PC ......................58  
Creating Discs/Editing Files.........................59  
Getting More Use of the Software ...............60  
File Backup on a Macintosh ................ 61  
System Requirements .................................61  
Software Installation ....................................61  
Connecting the Camera to the Macintosh ...62  
File Backup on the Macintosh .....................63  
Folder Structure and Extensions........ 64  
Make a trial recording  
Before the actual recording of important data,  
make a trial recording and play back the  
recorded data to check that the video and  
sound have been recorded correctly.  
Reset the camera if it does not operate  
correctly  
This camera uses a microcomputer. Factors  
such as background noise and interference  
can prevent it from operating correctly. If the  
camera does not operate correctly, reset the  
camera. (p. 76)  
Precautions on handling batteries  
Be sure to use the JVC BN-VF815U/  
VF823U battery packs.  
Customer Support Information ........... 65  
If the camera is subjected to electrostatic  
discharge, turn the power off before using it  
again.  
FURTHER INFORMATION  
If a malfunction occurs, stop using the  
camera immediately and consult your  
local JVC dealer  
Changing the Menu Settings............... 66  
Troubleshooting.................................... 72  
Warning Indications ............................. 77  
Cleaning ................................................ 79  
Specifications ....................................... 80  
Cautions ................................................ 82  
Terms..................................................... 84  
If a problem occurs when using the  
microSD card, take the card together with  
the camera for repair. If one of them is  
not included, the cause of the malfunction  
cannot be diagnosed, and the camera  
cannot be repaired.  
Recorded data may be erased while the  
camera is being repaired or inspected. Back  
up all data before requesting repairs or  
inspections.  
Because cameras may be used  
for demonstration in a shop, the  
demonstration mode is set to on by  
default  
To deactivate the demonstration mode, set  
[DEMO MODE] to [OFF]. (p. 69)  
Do not cover the fan (p. 12  
)
&, C  
If the camera becomes too hot inside it may  
cause a malfunction.  
9
GETTING STARTED  
Accessories  
AC Adapter  
AP-V14U  
Battery Pack  
BN-VF815U  
Component Cable  
Audio/Video Cable  
(p. 35)  
(p. 36, 50)  
GZ-HD6  
USB Cable  
Shoulder Strap  
CD-ROM  
(p. 46, 55, 62)  
(p. 11)  
(p. 53, 61)  
Lens Hood  
Already attached to the  
camera. (below)  
NOTE  
Make sure to use the  
provided cables for  
connections. Do not  
use any other cables.  
Remote Control  
RM-V750U (p. 11)  
Lithium Battery  
CR2025  
Pre-installed in the  
remote control unit.  
Core Filter  
(p. 11)  
GZ-HD6  
Attaching/Detaching the Lens Hood  
Place the guide  
ridge in the groove.  
Guide ridge  
10  
Attaching the Shoulder Strap  
Peel off the pad and thread  
the end of the strap through buckle, adjust its length, and use  
the eyelet.  
Thread the strap through the  
Position the buckle near  
the eyelet and reattach  
the pad.  
the strap guide to fix it in place.  
Buckle  
Strap Guide  
Eyelet  
Preparing the Remote Control  
A battery is included inside the remote control at the time of purchase.  
Remove the insulation sheet before use.  
Beam Effective Area  
To Reinsert the Battery  
Pull out the battery holder by pressing the  
lock tab.  
Remote Sensor  
Lock Tab  
Lithium Battery  
(CR2025)  
Effective distance:  
Max. 5 m (16 ft)  
NOTE  
The transmitted beam may not be effective  
or may cause incorrect operation when the  
remote sensor is directly exposed to sunlight  
or powerful lighting.  
Attaching the Core Filter to the DC Cord  
Attach the core filter to the DC cord. The core filter reduces interference. Connect the end of the  
cable with the core filter to the camera.  
Release the stopper.  
3 cm (1-3/16")  
Wind once.  
11  
Index  
NOTES  
The LCD monitor can rotate 270°.  
Power-linked operation  
You can also turn the camera on/off by  
opening/closing the LCD monitor.  
Be careful not to cover sensors 5, <and =  
during shooting.  
12  
6 Grip Strap (p. 18)  
7 USB (Universal Serial Bus) Connector [  
(p. 46, 55, 62)  
8 HDMI Connector [HDMI] (p. 35)  
9 Component Connector [COMPONENT]  
(p. 35)  
Camera  
]
2
! Index Button [INDEX] (p. 31)/  
Remaining Space Button/  
Data Battery Button [ 0/1] (p. 23)  
# Set Lever  
: Audio/Video Connector [AV] (p. 36, 50)  
; i.LINK Connector [ i ] (p. 49)  
< Remote Sensor (p. 11)  
= Lens Cover/Lens  
Move to ¡:  
Reverse Skip (p. 29)/Up/ Backlight  
Compensation Button [BACK LIGHT]  
(p. 25)  
GZ-HD6  
>
Lens Hood (p. 10)  
Move to ¢:  
? Shoe  
@ microSD Card Slot (p. 19)  
A Stud Hole (p. 18)  
B Tripod Mounting Socket (p. 18)  
C Fan inlet  
Forward Skip (p. 29)/Down/ Manual  
Focus Button [FOCUS] (p. 25)  
Move to £:  
Reverse Search (p. 29)/Left/Nightalive  
[NIGHT] (p. 25)  
Move to ¤:  
D Battery Release Button [BATT.] (p. 16)  
E Battery Pack Mount (p. 16)  
Forward Search (p. 29)/Right/Program  
AE [PROGRAM AE] (p. 24)  
Press down:  
Play/Pause (p. 29)  
Remote Control  
$ Function Button [FUNCTION] (p. 26)  
% Auto/Manual Mode Button [AUTO]  
(p. 24)/Information Button [INFO]  
(p. 39)  
& Fan outlet  
( Playback/Recording Mode Switching  
Button [PLAY/REC] (p. 20)  
Q Infrared Beam Transmitting Window  
R ZOOM (T/W) Buttons  
(Zoom in/out during playback.)  
S Up Button  
Rotate Button (counterclockwise) (p. 30)  
T Skip Backward Button  
U Left Button  
) Zoom Lever [W 7,T ] (p. 22)  
,
Speaker Volume Control [–VOL+] (p. 29)  
* Still Image Shooting Button [SNAPSHOT]  
(p. 21)  
V Back Button  
W PLAYLIST Button (p. 43)  
X START/STOP Button  
Y SNAPSHOT Button (p. 21)  
Z INFO Button (p. 39)  
a Skip Forward Button  
b PLAY/PAUSE Button  
c Right Button  
d Next Button  
e Down Button  
Rotate Button (clockwise) (p. 30)  
f INDEX Button  
g DATE Button  
+ Access/Charge Lamp [ACCESS/CHARGE]  
(p. 16) (Blinks when you access files  
or charge the battery. Do not turn off the  
power or remove the battery pack/AC  
adapter while accessing files.)  
Video/Still Image Mode Lamp [ !, #]  
(p. 20, 21)  
, LCD Monitor  
- Direct Backup Button [DIRECT BACK UP]  
(p. 56)/Event Button [EVENT] (p. 22)  
. Focus Assist Button [FOCUS ASSIST]  
(p. 25)  
/ Menu Button [MENU] (p. 17, 66)  
0 Video Recording Start/Stop Button [REC]  
(p. 20)  
NOTE  
You can move the zooming area with the up/  
down/left/right button during zoom in playback  
mode.  
1 DC Input Connector [DC] (p. 16)  
2 Microphone Input Connector [MIC]  
GZ-HD6  
3
Headphone Connector  
4 Power/Mode Switch [OFF (CHARGE), ON,  
MODE] (p. 16)  
5 Stereo Microphone  
13  
Indications on LCD Monitor  
During both Video and Still Image  
Recording  
During Video Recording Only  
[ 4 h 5 9 m ]  
FHD  
xvC  
0:04:01  
REC  
0
200X  
W
T
F5.6  
1/4000  
FOCUS  
LCD  
4 : 5 5  
! Mode Indicator (p. 20)  
PM  
JAN.20.2008  
# Wind Cut Indicator (p. 67)  
$ x.v.ColorTM (p. 67)  
! Selected Recording Mode Indicator  
(p. 24)  
% Picture Quality (p. 66)  
& Remaining Time (p. 20, 81)  
( Counter (p. 67)  
# Tele Macro Mode Indicator (p. 28)  
$ Approximate Zoom Ratio (p. 22)  
% Zoom Indicator (p. 22)  
& Focus Assist Indicator (p. 25)  
( Shutter Speed (p. 27)  
) Brightness/Sharpness Control Indicator  
(p. 28, 69)  
)
7REC : (Appears during recording.)  
(p. 20)  
79 : (Appears during record-standby  
mode.)  
* External Microphone Input Level Indicator  
(p. 67)  
* Battery Indicator (p. 23)  
+ Date/Time (p. 17)  
, Manual Focus Adjustment Indicator  
(p. 25)  
+ Event Indicator (p. 22)  
, Optical Image Stabilizer (OIS) Indicator  
(Appears when [OIS] is set to [OFF].)  
(p. 67)  
- Monitor Backlight (p. 69)  
. Selected Recording Medium Indicator  
(p. 67, 68)  
During Still Image Recording Only  
/ Drop Detection Indicator (Appears when  
[DROP DETECTION] is set to [OFF].)  
(p. 69)  
1920  
[ 9 9 9 9 ]  
FINE  
0 Effect Mode Indicator (p. 28)  
1 Program AE Mode Indicator (p. 24)/  
PHOTO  
10  
: Nightalive Indicator (p. 25)  
2 White Balance Indicator (p. 27)  
5
! Mode Indicator (p. 21)  
# ISO Sensitivity  
(GAIN): When set to [AUTO], there is no  
indication. (p. 67)  
$ Focus Indicator (p. 21)  
% Image Size (p. 67)  
& Picture Quality (p. 67)  
( Remaining Number of Shots (p. 81)  
) {: Continuous Shooting Mode Indicator  
(p. 68)  
3 Aperture Value (F-number) (p. 27)  
4
0 : Exposure Adjustment Indicator  
(p. 27)  
-: Backlight Compensation Indicator  
(p. 25)  
.: Spot Exposure Control Indicator  
(p. 26)  
: Iris Lock Indicator (p. 26)  
C
J: Bracket Shooting Mode Indicator  
(p. 68)  
* Shooting Indicator (p. 21)  
+ Self-Timer Recording Indicator (p. 68)  
14  
During Video Playback  
During Still Image Playback  
FHD  
1080p xvC  
X - 6 0  
1 : 5 5 : 0 1  
1080p  
1 0 1 - 0 0 9 8  
4:55 PM  
4 : 5 5  
PM  
JA N . 2 0 . 2 0 0 8  
JAN. 20. 2008  
! Mode Indicator (p. 29)  
: Playlist Playback Indicator (Appears  
when playing back a playlist.) (p. 44)  
! Mode Indicator (p. 30)  
# Output with 1080p (p. 70)  
$ Folder/File Number  
#
6
$ Output with 1080p (p. 70)  
% Slide Show Playback Indicator (p. 30)  
& Battery Indicator  
% x.v.ColorTM (p. 67)  
& Picture Quality (p. 66)  
( Playback Mode (p. 29)  
( Date/Time (p. 68)  
Playback  
U :  
Pause  
9 :  
5
3
Forward Search  
Reverse Search  
Forward Slow-Motion  
Reverse Slow-Motion  
:
:
9U :  
Y9 :  
(The number on the left shows speed.)  
) Counter (p. 67)  
* Volume Level Indicator  
+ Battery Indicator  
, Date/Time (p. 68)  
Operation guide display  
The operation guide is displayed at the  
bottom of the screen during menu display  
etc.  
- Wipe/Fader Effect Indicator (p. 34)  
SELECT SET  
QUIT  
15  
Necessary Settings before Use  
Be sure to configure the following 3 settings  
before use.  
Required charging/recording time (approx.)  
Recording  
time  
Battery pack Charging time  
Charging the Battery Pack  
GZ-HD5  
BN-VF815U  
2 hr. 40 min.  
(Provided)  
1 hr. 25 min.  
GZ-HD6  
1 Set the power/mode switch to OFF.  
1 hr. 20 min.  
GZ-HD5  
2 hr. 05 min.  
GZ-HD6  
BN-VF823U 3 hr. 50 min.  
OFF  
(CHARGE)  
2 hr. 00 min.  
8 To detach the battery pack  
Slide and hold BATT. (step 2), then remove  
the battery pack.  
2 Attach the battery pack.  
BATT.  
8 To check the remaining battery power  
See page 23.  
NOTES  
You can also use the camera with just the  
AC adapter.  
Please do not pull or bend the AC adapter  
plug and cable. This may damage the AC  
adapter.  
3 Connect the AC adapter.  
DC Connector  
To AC Outlet  
AC Adapter  
(110V to 240V)  
The access/charge lamp blinks to  
indicate charging has started.  
When the lamp goes out, charging is  
finished.  
16  
Date/Time Setting  
Language Setting  
After performing steps 1-3 (left column)  
The language on the display can be changed.  
4 Select [CLOCK ADJUST].  
1 Set the power/mode switch to ON.  
Select  
ON  
Set  
5 Set the date and time.  
2 Select the menu mode.  
CLOCK ADJUST  
Select  
DATE  
TIME  
MENU  
JAN 31 2007 11 07 AM  
Set  
SELECT SET  
QUIT  
Repeat this step to input the month, day,  
year, hour and minute.  
3 Select [GENERAL].  
Select  
8 To return to the previous screen  
Move the set lever to £.  
8 To exit the screen  
¬
Set  
VIDEO  
Press the MENU button.  
SCENE COUNTER  
EXTERNAL MIC LEVEL  
QUALITY  
ZOOM  
OIS  
SELECT SET  
QUIT  
4 Select [LANGUAGE].  
GENERAL  
DISPLAY  
Select  
DISPLAY ON TV  
LANGUAGE  
CLOCK ADJUST  
DATE DISPLAY STYLE  
Set  
SELECT SET QUIT  
5 Select the desired language.  
LANGUAGE  
Select  
ENGLISH  
DEUTSCH  
Set  
SELECT SET  
QUIT  
8 To return to the previous screen  
Move the set lever to £.  
8 To exit the screen  
Press the MENU button.  
17  
Other Settings  
When Using a microSD Card  
Grip Adjustment  
If you want to record to a microSD card, the  
following 3 operations need to be performed.  
Open the pad and make grip adjustments.  
Operations are certified on the following  
microSD cards.  
- Panasonic  
- TOSHIBA  
- SanDisk  
- ATP  
Video recording:  
Class 6 compatible SDHC card (4 GB)  
Still image recording:  
microSD card (128 MB to 2 GB) or  
SDHC card (4 GB)  
If other media are used, they may fail to  
record data correctly, or they may lose data  
that had already been recorded.  
MultiMediaCards are not supported.  
Files are recorded on a microSD card in  
SP mode, regardless of the picture quality  
setting.You cannot dub these files on HDV  
devices in high-definition picture quality.  
Tripod Mounting  
Align the camera stud hole with the tripod  
stud, and the mounting socket with the screw,  
and then rotate the camera clockwise to  
mount it to the tripod.  
Bottom of the Camera  
Cards used to record video on this camera  
cannot be played back on other devices.  
NOTE  
Do not use a tripod on unsteady or unlevel  
surfaces. It could tip over, causing serious  
damage to the camera.  
18  
QInsert a microSD card  
RChange the recording medium  
Preparation:  
Set the power/mode switch to OFF.  
The camera is programmed to record on the  
built-in hard disk when it is shipped from the  
factory.You can change the recording medium  
to microSD card.  
1 Open the microSD card cover.  
Set [REC MEDIA FOR VIDEO] and  
[REC MEDIA FOR IMAGE] to [SD].  
(p. 67, 68)  
2 Firmly insert the card with its clipped  
edge first.  
Bottom of the Camera  
NOTE  
Video picture quality will automatically be set  
to [SP].  
SFormat a microSD card when using it  
for the first time  
This will also ensure stable speeds and  
operation when accessing the microSD card.  
3 Close the microSD card cover.  
Select [EXECUTE] in [FORMAT SD  
CARD] to format the card. (p. 71)  
8 To remove a microSD card  
Push the microSD card once.  
After the card comes out a little, pull it out.  
NOTES  
Insert and remove the microSD card only  
while the power is turned off. Otherwise,  
data on the card may be corrupted.  
Do not touch the terminal on the reverse  
side of the label.  
19  
RECORDING  
Recording Files  
Video Recording  
Preparation: Set the power/mode switch to ON.  
Slide the power/mode switch to  
Press the PLAY/REC button to  
select the recording mode.  
SELECT  
PLAY/REC  
MODE to select  
(video) mode.  
!
MODE  
The switch returns to  
the original position  
when it is released.  
The  
lamp on the camera lights up.  
!
The lens cover opens automatically.  
Press the REC button to start  
recording.  
[ 4 h 5 9 m ]  
REC  
SP  
Approximate remaining  
time for recording  
8 To stop recording  
Press the REC button again.  
8 To change the picture quality  
Change the settings in [QUALITY].  
(p. 66)  
8 To register a file to an event  
See page 22.  
NOTES  
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically  
to conserve power. To turn the camera on again when using the battery pack, set the power/  
mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as  
zooming.  
Video files are given the names MOV001.TOD to MOV009.TOD, MOV00A.TOD to  
MOV00F.TOD, and MOV010.TOD in order of recording.  
A new file will be created for every 4 GB or approx. 19 minutes of continuous shooting.  
This camera records video in MPEG2 format compliant with SD-VIDEO format.  
Do not move or shake the camera suddenly during recording. If you do so, the driving sound  
(hum) of the hard disk may be recorded.  
20  
Still Image Recording  
Preparation: Set the power/mode switch to ON.  
Slide the power/mode switch to  
Press the PLAY/REC button to  
select the recording mode.  
SELECT  
PLAY/REC  
MODE to select  
mode.  
(still image)  
#
19  
MODE  
The switch returns to  
the original position  
when it is released.  
The lens cover opens automatically.  
The  
lamp on the camera lights up.  
#
Press and hold the SNAPSHOT  
button halfway.  
1920  
FINE  
[
The ?indicator becomes green when  
the captured image is focused.  
8 To change the picture quality  
Change the settings in [QUALITY].  
(p. 67)  
8 To record still images continuously  
Set [CONTINUOUS SHOOTING] to [ON].  
(p. 68)  
Press the SNAPSHOT button to  
start recording.  
20  
[ 9 9 9 9 ]  
FINE  
PHOTO  
8 To change the image size  
Change the settings in [IMAGE SIZE].  
(p. 67)  
NOTES  
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically  
to conserve power. To turn the camera on again when using the battery pack, set the power/  
mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as  
zooming.  
The sides of still images recorded in 16:9 size may be cut off when printed. Check whether  
16:9 size prints can be printed at your local print store.  
21  
Recording Files (Continued)  
3 Select the event that you want to  
Zooming  
register the file to.  
Preparation:  
To cancel the event registration, select  
[NON SECTION].  
Select  
or  
mode.  
! #  
Select the recording mode.  
Select  
VACATION  
1/ 3  
Zoom out  
Zoom in  
NON SECTION  
SELECT SET  
NEXT PAGE  
QUIT  
Set  
The selected event is displayed on the  
screen.  
W: Wide angle  
T: Telephoto  
Maximum zoom ratio is 10X (factory-preset).  
8 To exit the screen  
Press the EVENT button.  
8 To change the maximum zoom ratio  
(for !mode only)  
8 To search by event for a file to play back  
See page 31.  
Change the settings in [ZOOM]. (p. 67)  
NOTE  
NOTE  
Once you select a certain event to register a  
file, the setting will remain even if you turn the  
power off.  
Macro shooting is possible as close as  
approx. 5 cm (2") to the subject when the  
zoom lever is set all the way to W.  
Registering Files to Events  
!mode only  
If you select an event to register the file to  
before starting recording, the file will be  
registered to the selected event, thus making  
the file easy to find at playback.  
Preparation:  
Select  
mode.  
!
Select the recording mode.  
1
DIRECT  
BACKUP  
EVENT  
2 Select [ON/SELECT].  
Select  
CHANGE EVENT REG.  
ON/SELECT  
OFF  
Set  
22  
Checking the Remaining Space on the  
Checking the Remaining Battery  
Power  
Recording Media –  
mode only  
!
Preparation:  
Preparation:  
Set the power/mode switch to OFF.  
Select  
mode.  
!
Attach the battery pack.  
Select the recording mode.  
BATTERY CONDITION  
100%  
MAX RECORDING TIME  
HDD  
5h00m  
7h00m  
12h00m  
5h00m  
MAX TIME  
min  
50%  
0%  
FREE  
USED  
INDEX  
INDEX  
Battery information is displayed for approx.  
3 seconds if the button is pressed and  
released quickly, and for approx. 15 seconds  
if the button is pressed and held for several  
seconds.  
The maximum recording time is displayed for  
each picture quality mode.  
To return to the normal screen  
8
Press the 0/1button again.  
NOTE  
The recordable time display should only be  
used as a guide. It is displayed in 10 minute  
units.  
23  
Manual Recording  
Manual recording mode enables you to set  
the focus and screen brightness etc. manually.  
Program AE  
You can record videos or still images with  
optimum brightness by adjusting the exposure  
and shutter speed to suit your surroundings or  
the subject.  
To Change to Manual Recording  
Mode  
Preparation:  
In the manual recording mode;  
Select  
or  
mode.  
! #  
Select the recording mode.  
1
AUTO  
INFO  
2 Select the desired setting.  
For details on each setting, see below.  
8 To return to the auto recording mode  
Press the AUTO/INFO button so that the 4  
indicator appears.  
Select  
OFF  
Set  
8 To cancel the program AE  
Select [OFF] in step 2.  
8 Items for program AE setting  
6PORTRAIT:  
The subject in the foreground is  
accentuated by blurring the background.  
HSPORTS:  
Records fast moving subjects clearly.  
GSNOW:  
Compensates for subjects that may  
appear too dark when shooting in  
extremely bright surroundings, such as  
in snow.  
/SPOTLIGHT:  
Select this when a spotlight makes a  
subject appear too bright.  
TWILIGHT:  
V
Makes evening scenes look more natural.  
24  
Manual Focus  
Nightalive  
In the manual recording mode;  
Nightalive enables recording with more  
sensitivity in dim locations, by adjusting the  
shutter speed automatically.  
1
In the manual recording mode;  
C
2 Adjust the focus.  
8 To cancel Nightalive  
4 :  
JAN. 2  
Move the set lever to £(NIGHT) so that the  
indicator disappears.  
5
NOTE  
8 To cancel the manual focus setting  
Move the set lever to ¢(FOCUS) so that  
the @/Aindicator disappears.  
It is recommended to use the tripod (p. 18)  
because the shutter speed becomes slow.  
Focus Assist  
Backlight Compensation  
The image becomes black and white. The  
outline of focused object is displayed in  
blue. Use this for adjusting the focus more  
precisely.  
Backlight compensation brightens the subject  
by increasing the exposure.  
In the manual recording mode;  
1
FOCUS  
FOCUS ASSIST  
8 To cancel backlight compensation  
Move the set lever to ¡( -) twice so that  
the -indicator disappears.  
2 Adjust the focus, then press down  
the set lever to fix the focus.  
¬
8 To cancel the focus assist mode  
Press the FOCUS ASSIST button again.  
NOTE  
If you use focus assist in dark places, the  
rough area of the image appears in color, and  
the outline color becomes difficult to see.  
25  
Manual Recording (Continued)  
Spot Exposure Control  
Manual Setting in Function Menu  
Use this function when backlight  
compensation does not work well, or to adjust  
the brightness in the desired spot.  
You can use manual recording functions  
easily by selecting items in the function  
menus.  
In the manual recording mode;  
The following illustrations of display  
screens are examples of when [EFFECT] is  
set to [SEPIA].  
1 Move twice.  
In the manual recording mode;  
1
FUNCTION  
2 Select the desired spot metering area  
frame.  
2 Select the desired menu.  
SP [ 5 h 5 6 m ]  
Select  
For details on each menu, see below.  
Select  
ADJUST BRIGHTNESS  
SHUTTER SPEED  
APERTURE PRIORITY  
WB  
Set  
EFFECT  
TELE MACRO  
ZEBRA  
Set  
CUSTOM SETTING  
8 To lock the exposure  
After you finish configuring the setting,  
press and hold the set lever for more than  
3 Select the desired setting.  
Select  
EFFECT  
2 seconds. The indicator appears.  
C
OFF  
SEPIA  
MONOTONE  
CLASSIC FILM  
STROBE  
8 To cancel spot exposure control  
Move the set lever to ¡( -) once so that  
the .indicator disappears.  
Set  
4
EFFECT  
OFF  
SEPIA  
MONOTONE  
CLASSIC FILM  
STROBE  
FUNCTION  
The menu disappears and the indicator for  
the set function appears.  
8 To return to the previous screen  
Move the set lever to £.  
8 To exit the screen  
Press the FUNCTION button.  
26  
Menus  
Settings: [ ] = Factory-preset  
For !mode  
[AUTO]: The brightness is adjusted automatically.  
–6 to +6: Corrects the brightness within this range in increments  
of 1. Move the set lever to ¡/ ¢to set the value.  
For #mode  
[ 0]: The brightness is not adjusted.  
–2.0 to +2.0 (EV): Corrects the brightness within this range in  
increments of 1/3EV. Move the set lever to ¡/ ¢to set the  
value.  
ADJUST BRIGHTNESS  
Adjusts the brightness.  
8 To lock the exposure  
When the menu disappears after you finish configuring the  
setting, press and hold the set lever for more than 2 seconds.  
The indicator appears.  
C
[AUTO]: The shutter speed is adjusted automatically.  
1/2 to 1/4000:  
SHUTTER SPEED  
A fast shutter speed can  
freeze the motion of a  
fast-moving subject, and  
a slow shutter speed can  
blur the subject to give the  
impression of motion.  
The smaller the value, the faster the shutter speed. Move the  
set lever to ¡/ ¢to set the value.  
NOTE  
It is recommended to use a tripod (p. 18) when recording with a slow  
shutter speed.  
[AUTO]: The aperture value is adjusted automatically.  
F1.8 to F8:  
The lower the F-number (larger aperture value), the more  
blurred the background will become. The higher the F-number  
(smaller aperture value), the clearer the focus will be for both  
near and far objects. Move the set lever to ¡/ ¢to set the  
value.  
APERTURE PRIORITY  
You can add a blurring  
effect to the background  
by setting the aperture  
value (F-number).  
NOTE  
If the image is too bright, set to a larger F-number. If the image is too  
dark, set to a smaller F-number.  
[AUTO]: White balance is adjusted automatically.  
@
BMWB: Adjusts the white balance manually depending on the  
light source.  
WB  
1) Hold a sheet of plain white paper in front of  
the subject so that the white paper fills the  
screen.  
Adjusts the white balance  
to achieve the optimum  
colors for the amount of  
light in your surroundings  
during recording.  
2) Press and hold the set lever until the B  
indicator starts blinking then stops blinking.  
DFINE: When shooting outdoors on a sunny day.  
ECLOUD: When shooting outdoors on a cloudy day.  
FHALOGEN: When a video light or similar type of lighting is used.  
27  
Manual Recording (Continued)  
Menus  
Settings: [ ] = Factory-preset  
[OFF]: No effect is used.  
JSEPIA: The image has a brownish tint like old photos.  
KMONOTONE: The image becomes black and white like old  
movies.  
1
EFFECT  
Enables you to record  
videos or still images with  
special effects.  
LCLASSIC FILM*: This effect skips frames to give images of an  
old movie atmosphere.  
MSTROBE*: The image looks like a series of consecutive  
snapshots.  
TELE MACRO  
Enables you to shoot  
a subject as large as  
possible at a distance of  
approx. 40 cm (1.32 ft).  
1[OFF]: Disables the function.  
tON: Activates the function.  
ZEBRA*  
The sections of the  
photographic subject that  
are reflected as white due  
to light are displayed in a  
striped pattern. Use this  
as a guide for adjusting  
the brightness.  
[OFF]: Deactivate this function.  
70%: Sections that are close to being reflected as white (bright)  
are displayed in a striped pattern.  
100%: Sections that are completely reflected as white (too bright)  
are displayed in a striped pattern.  
CUSTOM SETTING*  
Press down the set lever then select sub menus.  
SHARPNESS  
Adjusts the  
enhancement level  
of the outline of the  
recorded image.  
Adjust the sharpness moving the set lever to £/ ¤, then press  
down.  
NOTE  
Enhancing the sharpness causes the recorded image to appear grainy.  
COLOR BAR  
The color bar will  
be displayed. The  
color characteristics  
of the camera can  
be confirmed by  
[OFF]: Deactivate this function.  
ON: Activate this function.  
recording this display.  
* Not available in #mode.  
28  
PLAYBACK  
Playing Back Files  
Video Playback  
Select the playback mode.  
Select  
(video) mode.  
!
MODE  
VIDEO  
8/8  
SELECT  
The switch returns to  
PLAY/REC  
the original position  
when it is released.  
SELECT SET  
SORT  
The  
lamp on the camera lights up.  
!
The index screen appears.  
(The lens cover closes automatically.)  
Select the desired file.  
Select  
Set  
8 To return to the index screen  
Press the INDEX button.  
8 To watch on TV  
8 To check the file information  
Press the AUTO/INFO button when  
playback is paused. (p. 39)  
8 To make one frame of video being  
played back into a still image  
Press the SNAPSHOT button when  
playback is paused.  
See page 35.  
8 To turn the date display on/off  
Change the settings in [DATE/TIME].  
(p. 68)  
Operations during Playback  
Speaker volume/  
GZ-HD6  
Headphone volume  
Return to the first  
scene of the file  
J : Turn down the  
Play/Pause  
volume  
Reverse search/  
Frame-by-frame  
playback (during  
pause)  
Forward search/  
Frame-by-frame  
playback (during  
pause)  
Go to the first scene  
of the next file  
I : Turn up the  
volume  
During forward/reverse search, moving the set lever to £/ ¤  
alters the search speed (maximum 60x).  
29  
Playing Back Files (Continued)  
Still Image Playback  
Select the playback mode.  
Select  
(still image) mode.  
#
MODE  
IMAGE  
8/8  
SELECT  
The switch returns  
PLAY/REC  
to the original  
position when it is  
released.  
SELECT SET  
SORT  
The  
lamp on the camera lights up.  
#
The index screen appears.  
(The lens cover closes automatically.)  
Select the desired file.  
Select  
Set  
8 To return to the index screen  
Press the INDEX button.  
8 To watch on TV  
See page 35.  
8 To turn the date display on/off  
Change the settings in [DATE/TIME]. (p. 68)  
8 To check the file information  
Press the AUTO/INFO button. (p. 39)  
Operations during Playback  
Rotate 90 degrees  
(counterclockwise)  
Start/end the slide show  
Display the next file  
Display the previous file  
Rotate 90 degrees  
(clockwise)  
During the slide show, moving the set lever to ¡/ ¢changes the playback order.  
30  
Event Screen – !mode only  
File Search Function  
You can search the desired file by the event  
that you registered the file to when recording.  
(p. 22) After searching by the event, you  
can search by the recording date to narrow  
down the search.  
You can switch the index screen to the  
date index screen or event screen for the  
convenient file search.  
Date Index Screen  
Preparation:  
You can search the desired file by the  
recording date.  
Select  
mode.  
!
Select the playback mode.  
Preparation:  
Select  
or  
mode.  
! #  
1 Press twice.  
Select the playback mode.  
1
INDEX  
INDEX  
2 Select the event.  
To move to the next page, select [NEXT  
2 Select the recording date.  
PAGE].  
Select  
SEARCH DATE  
Select  
VACATION  
1/ 3  
JAN 31 2007  
JAN 25 2007  
JAN 22 2007  
DEC 22 2006  
DEC 19 2006  
DEC 01 2006  
NEXT PAGE  
SORT  
Set  
SELECT SET  
SORT  
Set  
SELECT SET  
3 Select the file you want to play back.  
3 Select the recording date.  
JAN 07 2007  
1/3  
To display all the files, select [ALL  
SCENES].  
Select  
Select  
SEARCH EVENT  
ALL SCENES  
JAN 25 2007  
JAN 22 2007  
Set  
SELECT SET  
SORT  
Set  
SELECT SET  
SORT  
8 To return to the index screen  
Press the INDEX button.  
4 Select the file you want to play back.  
VACATION  
1/3  
Select  
Set  
SELECT SET  
SORT  
8 To return to the index screen  
Press the INDEX button.  
8 To change the event registration of a file  
See page 40.  
31  
Playing Back Files (Continued)  
To Play Back TPD Files  
Playback with Special Effects  
!mode only  
Playback effects  
TPD files (demonstration files, etc.) are stored  
in the EXTMOV folder.  
If you copy videos recorded on this camera  
to a PC, edit them on the PC, and then  
recopy them to this camera, store them in the  
EXTMOV folder. (p. 64)  
Add effects that, for example, alter the color  
tones of images.  
Preparation:  
Select  
or  
mode.  
! #  
Follow the procedure below to play back the  
TPD files in the EXTMOV folder.  
Select the playback mode.  
1
Preparation:  
Select  
mode.  
!
Select the playback mode.  
FUNCTION  
1
2 Select [EFFECT].  
Select  
DELETE  
PROTECT  
EFFECT  
WIPE/FADER  
FUNCTION  
PLAYBACK PLAYLIST  
EDIT PLAYLIST  
PLAYBACK TPD FILE  
PLAYBACK NORMAL FILE  
2 Select [PLAYBACK TPD FILE].  
Set  
Select  
DELETE  
PROTECT  
EFFECT  
WIPE/FADER  
PLAYBACK PLAYLIST  
EDIT PLAYLIST  
PLAYBACK TPD FILE  
PLAYBACK NORMAL FILE  
3 Select a desired effect.  
For details on each effect, see below.  
Set  
Select  
EFFECT  
OFF  
SEPIA  
MONOTONE  
CLASSIC FILM  
STROBE  
3 Select the file you want to play back.  
VIDEO [TPD]  
8/8  
Select  
Set  
SELECT SET  
QUIT  
4 Start playback.  
Set  
SELECT SET  
QUIT  
8 To exit the screen  
Press the FUNCTION button.  
8 To exit the screen  
Press the FUNCTION button.  
8 To return to the normal file playback  
mode  
Select [PLAYBACK NORMAL FILE] in  
8 To turn off the effect  
Select [OFF] in step 3.  
step 2.  
NOTE  
During TPD file playback, you cannot use  
some of the functions.  
32  
8 Items for EFFECT setting  
SEPIA:  
J
The image is given a brownish tint like an  
old photo.  
MONOTONE:  
The image becomes black and white like  
an old movie.  
K
CLASSIC FILM*:  
L
The image is given an old movie  
atmosphere by the effect of skipping  
frames.  
STROBE*:  
The image looks like a series of  
consecutive snapshots.  
M
* Not available in #mode.  
33  
Playing Back Files (Continued)  
Wipe or fader effects – !mode only  
8 Items for WIPE/FADER setting  
FADER-WHITE:  
Fades in or out with a white screen.  
O
Add effects at the beginning and end of  
videos. These effects cannot be set for still  
images.  
FADER-BLACK:  
Fades in or out with a black screen.  
P
Preparation:  
Select  
mode.  
!
FADER-B.W:  
Q
Select the playback mode.  
Fades in to a color screen from a black  
and white screen, or fades out in the  
opposite way.  
1
WIPE-CORNER:  
R
Wipes in on a black screen from the  
upper right to the lower left corner, or  
wipes out in the opposite way.  
FUNCTION  
WIPE-WINDOW:  
2 Select [WIPE/FADER].  
S
Starts in the center of a black screen and  
wipes in toward the corners, or wipes out  
in the opposite way.  
Select  
DELETE  
PROTECT  
EFFECT  
WIPE/FADER  
PLAYBACK PLAYLIST  
EDIT PLAYLIST  
PLAYBACK TPD FILE  
PLAYBACK NORMAL FILE  
WIPE-SLIDE:  
Wipes in from right to left, or wipes out in  
the opposite way.  
T
Set  
3 Select a desired effect.  
WIPE-DOOR:  
U
For details on each effect, see the right  
Wipes in as the two halves of a black  
screen which open to the left and right  
revealing the scene, or wipes out in the  
opposite way.  
column.  
Select  
WIPE/FADER  
OFF  
1/2  
FADER-WHITE  
FADER-BLACK  
FADER-B.W  
WIPE-SCROLL:  
V
WIPE-CORNER  
Wipes in from the bottom to the top of a  
black screen, or wipes out in the opposite  
way.  
Set  
SELECT SET  
QUIT  
4 Start playback.  
WIPE-SHUTTER:  
W
Wipes in from the center of a black  
screen toward the top and bottom, or  
wipes out in the opposite way.  
8 To exit the screen  
Press the FUNCTION button.  
8 To turn off the effect  
Select [OFF] in step 3.  
NOTE  
No effect will be applied on files with a play  
time shorter than 7 seconds.  
34  
Watching Images on TV  
This camera is designed to be used with  
high-definition or NTSC-type color television  
signals. It cannot be used with a television of  
a different standard.  
8 To connect using the COMPONENT  
connector  
To AC Outlet  
AC Adapter  
Connection with TV  
COMPONENT  
Connector  
You can output videos from the HDMI  
connector, COMPONENT connector, or AV  
connector. Select the connector that best suits  
your television.  
DC Connector  
Preparation: Turn off all units.  
8 To connect using the HDMI connector  
DC Connector  
HDMI Connector  
AV Connector  
AV Cable  
Component  
Cable  
AC Adapter  
To AC Outlet  
HDMI Cable  
(optional)  
COMPONENT  
Input Connector  
Audio L/R Input  
Connector  
Video Connector  
is not in use.  
NOTE  
HDMI Connector  
NOTE  
Change the settings in [COMPONENT  
OUTPUT] according to the connection.  
(p. 70)  
Change the settings in [HDMI OUTPUT],  
[HDMI COLOR SETTING] or [HDMI  
ENHANCE SETTING] according to the  
connection. (p. 70)  
35  
Watching Images on TV (Continued)  
8 To connect using the AV connector  
Playback Operation  
To AC Outlet  
AC Adapter  
After the connection with TV is  
completed  
DC Connector  
1 Turn on the camera and the TV.  
2 Set the TV to its VIDEO mode.  
3 (Only when connecting the camera to the  
VCR/DVD recorder)  
Turn on the VCR/DVD recorder, and  
set the VCR/DVD recorder to its AUX  
input mode.  
AV Connector  
4 Start playback on the camera.  
AV Cable  
(p. 29, 30)  
8 To display camera’s on-screen display  
on TV  
Set [DISPLAY ON TV] to [ON]. (p. 69)  
NOTE  
When the video was recorded with x.v.ColorTM  
set to [ON], change the x.v.ColorTM setting on  
TV. For details, refer to the TV’s instruction  
manual.  
AV Input Connector  
NOTE  
Change the settings in [VIDEO OUTPUT]  
to suit the screen size of your television.  
(p. 70)  
36  
EDITING/PRINTING  
Managing Files  
CAUTION  
4 Select [EXECUTE].  
Do not remove the recording medium or  
perform any other operation (such as turning  
off the power) while accessing files. Also,  
be sure to use the provided AC adapter, as  
the data on the recording medium may be  
corrupted if the battery becomes exhausted  
during operation. If the data on the recording  
medium becomes corrupted, format the  
recording medium to use the medium again.  
(p. 71)  
Select  
DELETE?  
REMAINING FILES:  
0008  
EXECUTE  
Set  
SELECT SET  
8 To exit the screen  
Press the FUNCTION button.  
Deleting/Protecting Files  
Protected files cannot be deleted. To delete  
them, release the protection first.  
Once files are deleted, they cannot be  
restored. Check files before deleting.  
Preparation:  
Select  
or  
mode.  
! #  
Select the playback mode.  
The following illustrations of display  
screens are examples of when performing  
[DELETE].  
Deleting/Protecting the Currently  
Displayed File  
1
FUNCTION  
2 Select [DELETE] or [PROTECT].  
Select  
DELETE  
PROTECT  
EFFECT  
WIPE/FADER  
PLAYBACK PLAYLIST  
EDIT PLAYLIST  
PLAYBACK TPD FILE  
PLAYBACK NORMAL FILE  
Set  
3 Select [CURRENT].  
Select  
DELETE  
CURRENT  
FILE SELECT  
DELETE ALL  
Set  
SELECT SET  
QUIT  
You can select the previous or next file by  
moving the set lever to £/ ¤.  
37  
Managing Files (Continued)  
Deleting/Protecting Files  
Deleting/Protecting All Files  
After performing steps 1-2 (p. 37)  
After performing steps 1-2 (p. 37)  
3 Select [FILE SELECT].  
3 Select [DELETE ALL] or [PROTECT  
ALL].  
Select  
DELETE  
Select  
CURRENT  
FILE SELECT  
DELETE ALL  
DELETE  
CURRENT  
FILE SELECT  
DELETE ALL  
Set  
SELECT SET  
QUIT  
Set  
SELECT SET  
QUIT  
4 Select the desired file.  
Select  
VIDEO DELETE  
8/8  
4 Select [EXECUTE].  
Select  
DELETE ALL?  
EXCEPT PROTECTED FILE  
EXECUTE  
Set  
SELECT SET  
QUIT  
Set  
The (deletion) or  
appears on the file. To select other files,  
repeat this step.  
If you slide the zoom lever towards T,  
the preview screen is displayed. Sliding  
the zoom lever towards W returns to the  
index screen.  
(protection) mark  
$
x
SELECT SET  
8 To exit the screen  
Press the FUNCTION button.  
8 To release protection  
Select the protected file in step 4  
(“Deleting/Protecting Files” left  
column).  
5
VIDEO DELETE  
8/8  
8 To release protection of all files  
1) In step 3, select [CANCEL ALL].  
2) Select [EXECUTE].  
FUNCTION  
SELECT SET  
QUIT  
6 Select [EXECUTE AND QUIT] (when  
performing [DELETE]), or [QUIT]  
(when performing [PROTECT]).  
Select  
DELETE?  
QUIT  
CANCEL  
Set  
SELECT SET  
8 To exit the screen  
Press the FUNCTION button.  
38  
Histogram – #mode only  
A histogram is a graph indicating the image’s  
brightness.  
By checking the image and its histogram, you  
can see the exposure level pattern and the  
overall tone reproduction.  
Viewing File Information  
Preparation:  
For !mode: Pause the playback.  
Otherwise, select the file on the index  
screen.  
For #mode: Play back the still image.  
Otherwise, select the file on the index  
screen.  
Preparation:  
Play back the still image.  
AUTO  
Press twice.  
FILE  
: MOV005.TOD  
: PRG001  
FOLDER  
DATE/TIME  
PB TIME  
QUALITY  
PROTECT  
: JAN 1 08 10:56 AM  
: 00:30:02  
: FHD  
AUTO  
INFO  
: OFF  
1/250 s  
F3.5  
ISO100  
INFO  
FILE:  
File name  
FOLDER:  
Folder name  
DATE/TIME:  
Date and time of the recording  
PB TIME (for video files):  
Playback time (length of the file)  
SIZE (for still images):  
Image size (p. 67)  
QUALITY:  
Image quality (p. 66, 67)  
PROTECT:  
D
B
A larger number of pixels in the center  
position indicates correct exposure and well-  
balanced brightness.  
D
(Dim)  
B
Brightness level  
(Bright)  
File protection status (p. 37)  
The shutter speed, F-number and ISO  
sensitivity (GAIN) when recorded are also  
displayed.  
8 To turn off the file information display  
Press the AUTO/INFO button again.  
8 To turn off the file information display  
Press the AUTO/INFO button a few times.  
NOTE  
The shutter speed displayed during shooting  
in auto mode is an approximation. It may not  
match the one displayed with the histogram.  
39  
Managing Files (Continued)  
8 To cancel the event registration  
Select [DELETE AND QUIT].  
Changing the Event Registration of  
Video Files after Recording  
!mode only  
To Extract a Still Image File from a  
Video File – !mode only  
Preparation:  
Select  
mode.  
!
Select the playback mode.  
You can extract the desired scene from a  
recorded video file, and store it as a still  
image file.  
DIRECT  
1
2
BACKUP  
Preparation:  
Select  
mode.  
EVENT  
!
Select the playback mode.  
Select a new event to register the file to.  
To move to the next page, select [NEXT  
PAGE].  
1 Select the desired video file.  
VIDEO  
8/8  
Select  
To cancel the event registration, select  
[NON SECTION].  
Select  
VACATION  
1/ 3  
Set  
SELECT SET  
SORT  
Playback starts. Search the desired scene.  
NON SECTION  
NEXT PAGE  
QUIT  
Set  
SELECT REGISTER  
2
3 Select the file you want to register.  
VIDEO  
8/8  
Select  
SNAP  
SHOT  
NOTES  
Set  
SELECT SET  
QUIT  
Extracted still images are stored at a  
resolution of 1920 x 1080. The image can  
be elongated in the horizontal or vertical  
directions depending on the picture quality  
of the source video file.  
Images cannot be extracted when the video  
file is in search or slow-motion playback.  
Extract images when the video is in normal  
playback, or when it is paused.  
To select other files, repeat this step.  
If you slide the zoom lever towards T,  
the preview screen is displayed. Sliding  
the zoom lever towards W returns to the  
index screen.  
DIRECT  
BACKUP  
4
The continuous shooting function (p. 68)  
cannot be used to extract images.  
EVENT  
5 Select [SAVE AND QUIT].  
Select  
EVENT RE-REGISTRATION ENDS  
DO YOU WANT TO SAVE?  
DELETE AND QUIT  
CANCEL  
Set  
SELECT SET  
40  
5 Select the number of prints (max.  
DPOF Print Setting – #mode only  
15 prints).  
Select  
The number of prints to make of a still image  
recorded on a microSD card can be set. This  
feature is useful when taking the microSD  
card to a photo lab for printing.  
Set  
Preparation:  
To set print information for other images,  
repeat steps 4 and 5. (You can set up to  
999 files.)  
Select  
mode.  
#
Select the playback mode.  
Set [REC MEDIA FOR IMAGE] to [SD].  
(p. 68)  
6
Setting Files Individually  
FUNCTION  
1
8 To exit the screen  
Press the FUNCTION button.  
FUNCTION  
8 To cancel the selection  
Set the number of prints to “00” in step 5.  
2 Select [DPOF].  
8 To confirm DPOF settings  
In step 3, select [CHECK SETTINGS].  
Select  
DELETE  
PROTECT  
COPY  
If necessary, change the number of prints  
for the desired file by following steps 4  
and 5.  
MOVE  
EFFECT  
DPOF  
Set  
8 To reset DPOF settings  
1) In step 3, select [RESET].  
2) Select [EXECUTE].  
3 Select [SELECT IMAGES].  
Select  
DPOF  
SELECT IMAGES  
ALL 1  
CHECK SETTINGS  
RESET  
Set  
SELECT SET  
QUIT  
4 Select the desired file.  
DPOF TOTAL:  
0
8/8  
Select  
Set  
SELECT SET  
QUIT  
If you slide and hold the zoom lever  
towards T, the preview screen of the still  
image is displayed.  
41  
Managing Files (Continued)  
Setting All Files Together (One Print for  
Each)  
1
FUNCTION  
2 Select [DPOF].  
Select  
DELETE  
PROTECT  
COPY  
MOVE  
EFFECT  
DPOF  
Set  
3 Select [ALL1].  
Select  
DPOF  
SELECT IMAGES  
ALL 1  
CHECK SETTINGS  
RESET  
Set  
SELECT SET  
QUIT  
4 Select [EXECUTE].  
Select  
ALL1  
CANCEL  
Set  
SELECT SET  
8 To exit the screen  
Press the FUNCTION button.  
8 To reset DPOF settings  
1) In step 3, select [RESET].  
2) Select [EXECUTE].  
42  
Playlists !mode only  
It is a list that enables you to organize  
recorded videos in order of preference.  
5 Select the file to add to playlist.  
Select  
EDIT  
TOTAL  
Preparation:  
00h00m  
Select  
mode.  
!
Select the playback mode.  
Set  
SELECT REGISTER  
Files recorded in 1440 CBR video picture  
quality are displayed with a 1440 CBR  
icon.  
When you select [IMPORT FROM  
EVENT]/[IMPORT FROM DATE], you  
can preview scenes. Select the file and  
press the INDEX button. When the index  
screen of individual scenes appears,  
select the file.  
Creating Playlists  
1
FUNCTION  
2 Select [EDIT PLAYLIST].  
To return to previous screen, press the  
INDEX button.  
Select  
DELETE  
PROTECT  
EFFECT  
WIPE/FADER  
PLAYBACK PLAYLIST  
EDIT PLAYLIST  
PLAYBACK TPD FILE  
PLAYBACK NORMAL FILE  
6 Select the insertion point.  
Set  
Select  
EDIT  
TOTAL  
00h00m  
3 Select [NEW LIST].  
Select  
EDIT PLAYLIST  
Set  
SELECT REGISTER  
NEW LIST  
EDIT  
RENAME  
DELETE  
To add other files, repeat steps 5 and 6.  
To delete a registered scene, select the  
registered file.  
Set  
SELECT SET  
QUIT  
4 Select an item and display files.  
7
EDIT  
Select  
TOTAL  
30h15m  
NEW LIST  
IMPORT FROM DATE  
ALL SCENES  
FUNCTION  
SELECT REGISTER  
Set  
SELECT SET  
QUIT  
[IMPORT FROM EVENT]:  
8 Select [SAVE AND QUIT].  
Search for an event and display the  
corresponding files listed by recording  
date.  
Select  
QUIT PLAYLIST  
SAVE EDITED CONTENTS?  
DELETE AND QUIT  
CANCEL  
Select the event.  
[IMPORT FROM DATE]:  
Display all the files in the medium listed  
by recording date.  
[ALL SCENES]:  
Display all files individually.  
Set  
SELECT SET  
8 To exit the screen  
Press the FUNCTION button.  
Continued on next page  
43  
Playlists !mode only (Continued)  
NOTES  
Playing Back Playlists  
A maximum of 99 playlists can be created.  
Each playlist can consist of a maximum of  
99 scenes.  
If you delete the original files, the  
corresponding files are also deleted from  
the playlist.  
1
FUNCTION  
2 Select [PLAYBACK PLAYLIST].  
Select  
DELETE  
PROTECT  
EFFECT  
WIPE/FADER  
PLAYBACK PLAYLIST  
EDIT PLAYLIST  
PLAYBACK TPD FILE  
PLAYBACK NORMAL FILE  
Set  
3 Select the playlist that you want to  
play back.  
Select  
PLAYBACK PLAYLIST  
01 2007 JAN.07 04:45PM  
02 2007 JAN.07 09:25PM  
03 2007 JAN.07 09:55PM  
Set  
SELECT SET  
QUIT  
8 To exit the screen  
Press the FUNCTION button.  
8 To stop playback  
Press down the set lever.  
8 To return to the normal file playback  
mode  
Select [PLAYBACK NORMAL FILE] in  
step 2.  
8 To play back from the desired scene  
1) In step 2, press the INDEX button. (The  
index screen for playlist appears.)  
2) Select the desired scene.  
44  
Deleting Playlist  
Other Operations of Playlists  
Original files are not deleted even if you  
delete the playlist.  
You can perform additional editing and delete  
files in a created playlist.  
Preparation:  
Perform steps 1-2. (p. 43)  
3 Select [DELETE].  
4 Select a playlist you want to delete.  
Adding/Deleting Files in Playlist  
To delete all playlists at once, select  
[DELETE ALL].  
3 Select [EDIT].  
5 Press down the set lever.  
4 Select the playlist you want to edit.  
To add or delete files, follow the steps 5 to  
6 Select [EXECUTE].  
8 in “Creating Playlists”. (p. 43)  
Changing Playlist Names  
The default name of a playlist is its creation  
date and time.  
3 Select [RENAME].  
4 Select the desired playlist.  
5 Select the desired letter.  
Repeat this process to complete the  
name.  
You can change the character types  
(capital letters, small letters or marks) by  
selecting [A/a/@].  
To correct a letter, select [}] or []] and  
press down the set lever to move the  
cursor to the letter, then select [CLE] and  
press down the set lever.  
6 Select [¯].  
45  
COPYING  
Copying Files  
Types of Copying and Connectable Device  
Using a DVD Burner to Copy Files  
from the Camera  
The Camera  
You can copy still images  
between the HDD and  
microSD card with this  
camera alone. (p. 51)  
The files in the camera can be backed up to a  
DVD disc using a DVD burner.  
Supported media:  
DVD-R, DVD-RW, DVD-R DL (More than  
one disc may be required depending on the  
size of the file to be copied. In this case, use  
new (unused) discs.)  
DVD Burner (CU-VD40)  
You can copy video/still  
image files recorded on this  
camera onto DVD discs.  
(right column)  
This disc cannot be played in a normal DVD  
player. Use one of the following methods to  
view the disc.  
- Playback the disc using the camera.  
(“To play back the created disc using the  
camera” p. 47, 49)  
- Playback the disc using a DVD burner.*  
- Playback on a PC.*  
* The disc must first be finalized on the camera.  
VCR/DVD Recorder  
You can dub video files  
recorded on this camera  
onto DVD discs. (p. 49)  
Connection with a DVD Burner  
Preparation:  
Set the power/mode switch to OFF.  
PC  
You can copy video/still  
image files on this camera  
onto your PC. For details,  
refer to PC OPERATION  
section. (p. 52 to 65)  
To AC Outlet  
AC Adapter  
DC Connector  
USB Connector  
USB Cable  
USB Connector  
DVD Burner  
NOTES  
Turn the DVD burner on first, then turn the  
camera on.  
Use the USB cable that came with the DVD  
burner.  
46  
Backup All Files  
Preparation:  
4 Select [EXECUTE] or [EXECUTE AND  
FINALIZE].  
By selecting [EXECUTE AND FINALIZE],  
the disc is finalized after the files are  
copied.  
Connect the camera to the DVD burner.  
Select  
or  
mode.  
! #  
Select  
The following illustrations of display  
screens are examples of when backing up  
video files.  
DVD  
DVD(DL)  
5
3
EXECUTE AND FINALIZE  
CANCEL  
Set  
SELECT SET  
TOP  
1 Select [NORMAL BACK-UP].  
The files are copied on the disc. When  
[COMPLETED] appears, press down the  
set lever to complete the operation.  
When [COMPLETED. CHANGE DISC]  
appears, change the disc. Remaining  
files are copied on the second disc.  
To cancel the copying, select [STOP].  
Select  
VIDEO  
FINALIZE  
NORMAL BACK-UP  
SELECT BACK-UP  
PLAYBACK  
Set  
SELECT  
SET  
2 Select the desired menu.  
[UNSAVED SCENES/FILES NOT  
BACKED-UP]:  
8 To return to the top screen  
Press the MENU button, then select [YES].  
Files that have never been copied to a  
DVD disc are automatically selected and  
copied.  
8 To finalize the disc after copy is finished  
1) Connect the camera to the DVD burner.  
2) Turn the camera’s power on.  
3) Select [FINALIZE].  
[ALL]:  
All files in the recording medium are  
copied.  
4) Select [EXECUTE].  
5) When [COMPLETED] appears, select  
[OK].  
Select  
NORMAL BACK-UP  
UNSAVED SCENES  
ALL  
8 To play back the created disc using the  
camera  
1) Connect the camera to the DVD burner.  
2) Turn the DVD burner on first, then turn  
the camera on.  
3) Select [PLAYBACK].  
4) Select the desired folder.  
5) Select the desired file.  
Set  
SELECT SET  
TOP  
3 Select the desired menu.  
[CONTINUE TO COPY]:  
Files are added to the free space of a  
disc. Displayed only when a recordable  
disc is inserted.  
To return to the previous screen, press  
the INDEX button.  
[FORMAT]:  
After the disc is formatted (all recorded  
data on the disc is deleted), the files are  
copied on the disc.  
Select  
VIDEOS ARE RECORDED  
I
FORMAT  
CANCEL  
Set  
SELECT SET  
TOP  
47  
Copying Files (Continued)  
Select Files for Backup  
3 Select [ALL].  
CREATE BY EVENT  
ALL  
Preparation:  
Connect the camera to the DVD burner.  
JAN.01.2007 12:04  
Select  
or  
mode.  
JAN.01.2007 12:15  
FEB.01.2007 12:04  
FEB.01.2007 12:15  
! #  
SELECT SET  
SORT  
The following illustrations of display  
screens are examples of when backing up  
video files.  
4 Select the desired menu.  
[CONTINUE TO COPY]:  
Files are added to the free space of the  
disc. Displayed only when a recordable  
disc is inserted.  
1 Select [SELECT BACK-UP].  
Select  
VIDEO  
FINALIZE  
[FORMAT]:  
NORMAL BACK-UP  
SELECT BACK-UP  
PLAYBACK  
After the disc is formatted (all recorded  
data on the disc is deleted), the files are  
copied to the disc.  
Set  
SELECT  
SET  
Select  
VIDEOS ARE RECORDED  
2 Select the desired menu.  
FORMAT  
Select  
SELECT BACK-UP  
CREATE BY DATE  
CANCEL  
SELECT FROM SCENES  
Set  
SELECT SET  
TOP  
CREATE BY EVENT  
CREATE BY PLAYLIST  
Set  
SELECT SET  
TOP  
5 Select [EXECUTE] or [EXECUTE AND  
[SELECT FROM SCENES/SELECT  
FROM IMAGES]:  
Register backup files individually.  
1) Select the desired file. To select other  
files, repeat this process.  
FINALIZE].  
By selecting [EXECUTE AND FINALIZE],  
the disc is finalized after the files are  
copied.  
Select  
DVD  
DVD(DL)  
5
3
2) Press the INDEX button then go to  
step 4.  
[CREATE BY EVENT*]:  
EXECUTE AND FINALIZE  
CANCEL  
Files are sorted according to event.  
Relevant files are displayed in a list.  
Select the event.  
Set  
SELECT SET  
TOP  
The disc begins to be created. When  
[COMPLETED] appears, press down the  
set lever to complete the operation.  
When [COMPLETED. CHANGE DISC]  
appears, change the disc. The second  
disc begins to be created.  
[CREATE BY PLAYLIST*]:  
Select the desired playlist from the list  
of playlists. The selected playlists are  
displayed in a list.  
1) Select the desired list. To select other  
lists, repeat this process.  
To cancel the disc creation, select  
[STOP].  
2) Move the set lever to ¤twice.  
[CREATE BY DATE]:  
Files are sorted according to the date  
on which they were recorded. Relevant  
files are displayed in a list. Select the  
recording date.  
* Not available in #mode.  
To preview scenes, press the INDEX  
button. (The index screen of individual  
scenes appears.) Select the file.  
To return to previous screen, press the  
INDEX button.  
48  
8 To return to the top screen  
Preparation: Turn off all units.  
Press the MENU button, then select [YES].  
8 To connect using the i.LINK connector  
8 To finalize the disc after copy is finished  
1) Connect the camera to the DVD burner.  
(p. 46)  
2) Turn on the camera.  
3) Select [FINALIZE].  
(digital dubbing)  
To AC Outlet  
AC Adapter  
i.LINK Connector  
4) Select [EXECUTE].  
5) When [COMPLETED] appears, select  
[OK].  
8 To play back the created disc using the  
camera  
1) Connect the camera to the DVD burner.  
(p. 46)  
2) Turn the DVD burner on first, then turn  
the camera on.  
3) Select [PLAYBACK].  
DC Connector  
i.LINK Cable  
(optional)  
4) Select the desired folder.  
5) Select the desired file. To return to  
previous screen, press the INDEX  
button.  
VCR/DVD Recorder  
i.LINK  
Connector  
NOTE  
In case of [CREATE BY PLAYLIST], date/time  
on the file information display shows the date  
of copying the file, not of the actual recording.  
NOTES  
Be sure to use the optional JVC VC-  
VDV206U or VC-VDV204U i.LINK cable  
depending on the connector type (4 or  
6 pins) of the VCR/DVD recorder.  
Using a VCR/DVD Recorder to Dub  
Files from the Camera  
To dub videos in high-definition quality:  
- Connect a device that supports high-definition  
quality videos.  
You can connect the camera to a VCR or DVD  
recorder, and dub the camera’s files directly  
onto those devices.  
- Use the i.LINK connector.  
- Set the [i.LINK OUTPUT (DUB)] to [1440  
CBR]. (p. 70)  
- Make a playlist consisted of 1440 CBR video  
only, and dub the playlist. (p. 50)  
To dub videos in standard quality:  
- Use the i.LINK connector.  
- Set the [i.LINK OUTPUT (DUB)] to [DV].  
(p. 70)  
Connection with a VCR/DVD Recorder  
You can connect using either the i.LINK  
connector or AV connector.  
Continued on next page  
49  
Copying Files (Continued)  
8 To connect using the AV connectors  
(analog dubbing)  
2 Start playback on the camera.  
To play back videos  
To play back playlists  
To AC Outlet  
AC Adapter  
1) Press the FUNCTION button.  
2) Select [DUBBING PLAYBACK].  
3) Move the set lever to ¤. *1  
4) Select [START PLAYBACK]. (A black  
screen is displayed for 5 seconds at  
DC Connector  
the first and the last scene. *2)  
1
*
When dubbing using the i.LINK  
connection and with [i.LINK OUTPUT  
(DUB)] set to [1440 CBR], a  
confirmation screen is displayed after  
operation. Select [OK] and proceed to  
step 4).  
When dubbing using the i.LINK  
connection and with [i.LINK OUTPUT  
(DUB)] set to [1440 CBR], the image  
to be dubbed is not displayed on the  
camera’s screen. Check the images  
on a TV connected to the VCR/DVD  
recorder.  
2
*
AV Connector  
AV Cable  
3 At the point you want to start  
dubbing, start recording on the VCR/  
DVD recorder.  
Refer to the VCR/DVD recorder’s  
instruction manual  
.
VCR/DVD Recorder  
8 To stop dubbing  
Stop recording on the VCR/DVD recorder,  
then press the REC button again.  
NOTES  
Dubbing Operation  
The date displays, effects and wipe/fader  
effects cannot be dubbed using the i.LINK  
connection.  
When playing back images dubbed using  
the i.LINK on a VCR/DVD recorder, the  
images may stop momentarily at junctions  
between scenes.  
1 Set the VCR/DVD recorder to its AUX  
input mode.  
Check that the images from the camera  
are input correctly to the VCR/DVD  
recorder.  
50  
5 Set the file unit ([ALL] or [FILE]) to  
Copying/Moving Still Image Files  
copy/move.  
You can copy or move still image files  
between the HDD and microSD card.  
Preparation:  
Select  
mode.  
#
[FILE]:  
Select the playback mode.  
Make sure that microSD card is inserted in  
the microSD slot.  
Select this to transfer the selected files.  
1) Select the desired file.  
Make sure that enough free space is left in  
the copy/move destination medium.  
The smark appears on the file. To  
select other files, repeat this step.  
2) Press the FUNCTION button.  
1
[ALL]:  
Select this to transfer all files in the  
recording medium.  
FUNCTION  
6 Select [EXECUTE].  
Select  
2 Select [COPY] or [MOVE].  
[COPY]:  
Files are copied to the destination  
medium while leaving original files in the  
source medium.  
Set  
File transfer starts. When [COPYING  
COMPLETED/MOVING COMPLETED]  
appears, press down the set lever.  
[MOVE]:  
Files are moved to the destination  
medium while deleting original files  
(except read-only files) in the source  
medium.  
8 To exit the screen  
Press the FUNCTION button, then select  
[EXECUTE].  
Select  
DELETE  
PROTECT  
COPY  
MOVE  
8 To stop the file transfer  
1) Press down the set lever.  
2) Select [EXECUTE].  
EFFECT  
DPOF  
Set  
3 Set the direction of copy/move.  
(HDD ] SD or SD ] HDD)  
IMAGE COPY  
MEDIA  
ALL  
FILE UNIT  
0059  
NUMBER OF FILE  
EXECUTE  
CANCEL  
SELECT SET  
QUIT  
4
51  
PC OPERATION  
File Backup on a Windows® PC  
Install the software that came with the camera  
to your PC.  
You can back up your files on your PC with a  
simple one-touch operation, edit your files on  
your PC, and also create discs.  
For the compatible drives:  
powerproducer/4/comp_dvd_drive.jsp  
For the compatible BD drives:  
powerproducer/4/comp_nextgen_drives.jsp  
Even if you do not install the software, you  
can still back up your files on your PC.  
(p. 57)  
NOTE  
Even if your system meets the recommended  
requirements above, you may still experience  
dropped frames while playing back high  
definition video, or you may find that editing  
takes a long time. In order to use these  
functions more smoothly, it is recommended  
that you use a higher performance PC (CPU:  
Intel® CoreTM 2 Duo, memory: 2 GB or more).  
System Requirements  
OS: Either one of the following OS should be  
pre-installed (32-bit):  
Windows® XP Home Edition (SP2)  
Windows® XP Professional (SP2)  
Windows Vista® Home Basic  
Windows Vista® Home Premium  
CPU:  
Intel® Pentium® 4, at least 3.2 GHz  
(Intel® CoreTM Duo 1.66 GHz or more  
recommended)  
Intel® Pentium® M, at least 1.8 GHz  
RAM:  
[XP] At least 512 MB  
(1 GB or more recommended)  
[Vista] At least 1 GB  
(2 GB or more recommended)  
Free hard disk space:  
At least 750 MB for installation  
For creating Blu-ray disc, at least 30 GB  
(60 GB or more recommended)  
Connector:  
USB 2.0 connector  
Sound card:  
Direct Sound compatible sound card  
Display:  
Must be capable of displaying at least  
1024 x 768 (XGA) in high color 16 bit or  
higher  
(1280 x 1024 (SXGA) or higher is  
recommended)  
Intel/nVidia/ATI MPEG-2 HD DxVA  
compatible card  
Miscellaneous:  
Internet Explorer 5.5 or later  
DirectX 9.0 or later  
Supported media:  
BD-RE, BD-R, DVD-R/-RW, DVD+R/+RW,  
CD-R/RW  
52  
Digital Photo Navigator 1.5  
Software Installation  
Allows you to change the format of still image  
files backed up on your PC.  
The following software is included in the CD-  
ROM that came with your camera.  
You can find the latest information on the  
provided software program at CyberLink’s  
co.jp/products/ne/  
CyberLink BD Solution  
Comprehensive application software that  
consists of the following 3 kinds of software.  
PowerCinema NE for Everio  
Preparation:  
The main authoring software.You can  
perform various operations such as file  
backup, playback, and editing from the top  
menu of this software.  
Quit any other software you are using. (Check  
that there are no other application icons on  
the status bar.)  
1 Load the provided CD-ROM into the  
PC.  
After a moment, the [SETUP] screen  
appears. If the [SETUP] screen does not  
appear, double-click the CD-ROM icon in  
[My Computer].  
2 Click [Easy Installation].  
If you want to specify the type of software  
to install or the installation destination  
folder etc., select [Custom Installation].  
Follow the instructions on the screen to  
install the software.  
Q You can perform detailed settings for each  
item.  
R Select a function on the right, and an  
explanation is displayed.  
S The operating procedure for each function  
is displayed.  
T Plays back video files on the PC. (p. 58)  
U Plays back still image files on the PC.  
(p. 58)  
V Creates discs/Edits files. (p. 59)  
W Backs up camera files onto the PC.  
(p. 56)  
PowerProducer 4 NE  
Allows you to create discs. Automatically  
starts from an operation in PowerCinema  
NE for Everio.  
3 Click [Yes].  
PowerDirector 6 NE  
Allows you to edit files on your PC.  
Automatically starts from an operation in  
PowerCinema NE for Everio.  
NOTE  
If the recorded video will be edited with  
the software in the supplied CD-ROM, set  
x.v.ColorTM to [OFF] before recording.  
Continued on next page  
53  
File Backup on a Windows® PC (Continued)  
4 Select the desired language and click  
8 When installation is completed  
The installed software is displayed in [All  
Programs] – [CyberLink BD Solution].  
[OK].  
5 Click [Yes].  
The software installation starts.  
The backup destination folder [MyWorks]  
for files is created on the hard disk drive  
that has the most free space.  
6 Click [Finish].  
54  
8 When you have finished operation  
Always follow the procedures below when  
disconnecting the camera, or turning off the  
camera/PC power.  
Failing to do so may cause damage to the  
camera and PC.  
1) Confirm that the access/charge lamp on  
the camera does not light or blink. (If the  
access/charge lamp lights or blinks, wait  
until it is turned off before proceeding.)  
2) Double-click the [Safely Remove  
Hardware] or [Unplug or Eject Hardware]  
icon in the status bar.  
Connecting the Camera to the PC  
Preparation:  
Set the camera’s power/mode switch to OFF.  
To AC Outlet  
AC Adapter  
DC Connector  
3) Select [USB Mass Storage Device] or  
[USB Disk], and then click [Stop].  
4) Click [OK].  
5) Disconnect the USB cable.  
6) Turn off the camera and PC.  
USB Connector  
USB Cable  
USB Connector  
NOTES  
Never disconnect the USB cable while the  
access/charge lamp on the camera lights or  
blinks.  
Do not turn off the camera when the USB  
cable is connected, to prevent malfunctions  
of the PC.  
Connect the camera directly to the PC, not  
through a hub.  
Do not use an extension USB cable.  
When you copy files from the PC to the  
recording medium on the camera, do not  
include any other files than those recorded  
on the camera.  
Do not delete, move, or rename the files and  
folders in the camera from the PC.  
55  
File Backup on a Windows® PC (Continued)  
File Backup from the specified media  
File Backup on the PC  
Preparation:  
This method uses the software on the CD-  
ROM to back up files onto your PC.  
Video files that have never been backed up  
onto the PC are automatically selected and  
backed up.  
Install the software.  
Connect the camera to the PC.  
1 Set the camera’s power/mode switch  
to ON.  
Preparation:  
2 On the camera, select [BACK UP].  
Install the software from the provided CD-  
ROM.  
Connect the camera to the PC.  
PLAYBACK ON PC  
BACK UP  
1 Set the camera’s power/mode switch  
to ON.  
2 On the camera, press the DIRECT  
BACK UP button.  
SELECT SET  
QUIT  
A dialog box is displayed on the PC  
screen. However, you do not need to  
use the dialog box. File copy starts  
automatically.  
3 On the PC, Click [EVERIO_HDD] or  
[EVERIO_SD].  
When the progress bar disappears, the  
process is complete.  
When the progress bar disappears, the  
process is complete.  
NOTE  
When backup is performed, folders for each  
medium (HDD or microSD) are created in the  
[MyWorks] folder (p. 54), and the files are  
backed up inside those folders. (If backup is  
performed from more than one camera HDD,  
individual HDD folders are created.)  
56  
5 Select the folder that you want to  
back up, and drag & drop it into the  
folder you created in step 1.  
File Backup on the PC without Using  
Software  
Preparation:  
Connect the camera to the PC with the USB  
cable. (p. 55)  
SD_VIDEO:  
Folder that contains video files. If you  
want to back up files individually, open  
this folder, and drag & drop files such as  
[PRG001] one by one.  
1 On the PC, create a folder to back up  
files into.  
DCIM:  
Folder that contains still image files. If  
you want to back up files individually,  
open this folder, and drag & drop files  
such as [PIC_0001.JPG] one by one.  
2 Set the camera’s power/mode switch  
to ON.  
3 On the camera, select  
[PLAYBACK ON PC].  
PLAYBACK ON PC  
BACK UP  
NOTE  
For further details on the use of folders, see  
page 64.  
SELECT SET  
QUIT  
4 On the PC, Double-click [EVERIO_  
HDD] or [EVERIO_SD].  
57  
Other Windows® PC Operations  
4 Click the media that contains desired  
Playing Back Files on the PC  
files.  
Preparation:  
Install the software.  
Connect the camera to the PC.  
1 Set the camera’s power/mode switch  
to ON.  
2 On the camera, select [PLAYBACK  
ON PC].  
A dialog box is displayed on the PC  
screen. However, you do not need to  
use the dialog box. PowerCinema starts  
automatically.  
5 Click the desired file.  
PLAYBACK ON PC  
BACK UP  
SELECT SET  
QUIT  
If you click Sort by/Filter by/View by,  
searching options are displayed.  
3 Click [Browse Videos] (for video  
playback) or [Browse Pictures] (for  
still image playback).  
Sort by:  
The order of files is rearranged according  
to item that you selected.  
Filter by:  
Files are filtered according to the item  
that you selected.  
View by:  
You can change the number of  
thumbnails on a screen.  
For more information on detailed  
operations of the software, refer to their  
Read me (p. 60) or CyberLink web site.  
(p. 53)  
58  
5 Click the check box of the desired  
Creating Discs/Editing Files  
Preparation:  
file.  
The smark appears in the check box.  
To select other files, repeat this step.  
Install the software.  
Connect the camera to the PC.  
1 Set the camera’s power/mode switch  
to ON.  
2 On the camera, select [PLAYBACK  
ON PC].  
A dialog box is displayed on the PC  
screen. However, you do not need to  
use the dialog box. PowerCinema starts  
automatically.  
6 Click [Copy/Advanced function].  
PLAYBACK ON PC  
BACK UP  
SELECT SET  
QUIT  
3 Click [Copy/Edit].  
7 Click [Create Disc] for creating discs,  
or [Advanced Editing] for editing.  
4 Click the media that contains desired  
files.  
PowerProducer (for creating discs) or  
PowerDirector (for editing) starts. For more  
information on detailed operations of the  
software, refer to their Read me (p. 60)  
or CyberLink web site. (p. 53)  
Continued on next page  
59  
Other Windows® PC Operations (Continued)  
NOTES  
Digital Photo Navigator 1.5  
You can use following discs:  
- BD-RE, BD-R  
The User’s Guide is included on the CD-ROM  
in PDF format.  
- DVD-R/DVD+R (Unused discs)  
- DVD-RW/DVD+RW (They need to be  
formatted before recording. Formatting  
deletes all content recorded on the disc.)  
- CD-R/RW  
1 Load the provided CD-ROM into the  
PC.  
2 Right-click the CD-ROM icon in [My  
DVD-RAM discs cannot be used.  
You may not be able to play back the  
created disc depending on the performance  
of a device. Also the image may stop  
momentarily at junctions between scenes.  
The PC must be equipped with a compatible  
drive and player software to play back the  
created disc.  
Computer], then click [Open].  
3 Double-click the [DOCS] folder.  
4 Open the “Start.pdf” file and click the  
button of the desired language.  
NOTES  
You need to connect to the Internet to see  
the Tutorial.  
Getting More Use of the Software  
Adobe® Acrobat® ReaderTM or Adobe®  
Reader® must be installed to read PDF  
files. Adobe® Reader® can be loaded from  
For more information on operations of the  
software, see the Tutorials for each software  
program or the User’s Guides.  
PowerCinema NE for Everio  
1 Double-click [PowerCinema NE for  
Everio] icon on the desktop.  
2 Click [Tutorial].  
PowerProducer 4 NE  
1 Select [CyberLink BD Solution] –  
[PowerProducer] from [All Programs].  
2 Click [User’s Guide] or [Readme].  
PowerDirector 6 NE  
1 Select [CyberLink BD Solution] –  
[PowerDirector] from [All Programs].  
2 Click [User’s Guide] or [Readme].  
60  
File Backup on a Macintosh  
If the software on the provided CD-ROM is  
4 Click [Continue].  
installed, the backed up file can be viewed in  
QuickTime Player or edited in iMovie HD or  
Final Cut Pro. (Several functions will not be  
accessible.)  
You can find the latest information on the  
provided software program at our world wide  
ne/  
Click [Agree] and click [Continue].  
5
6
System Requirements  
Hardware:  
Macintosh 1.25 GHz or faster Power PC  
G4/G5 or Intel® processor  
(Intel® CoreTM Duo 1.66 GHz or more  
recommended.)  
USB 2.0 connector is required.  
OS:  
Mac OS X (10.4.4 to 10.4.11, 10.5.1)  
Click [Install].  
RAM:  
The software installation starts.  
At least 512 MB  
(1 GB or more recommended)  
Software Installation  
Preparation:  
Quit any other software you are using.  
Click [Close].  
7
1 Load the provided CD-ROM into the  
PC.  
2 Double-click the CD-ROM icon.  
3 Double-click the QuickTime  
Component for Everio icon.  
61  
File Backup on a Macintosh (Continued)  
8 When you have finished operation  
Connecting the Camera to the  
Macintosh  
Always follow the procedures below when  
disconnecting the camera, or turning off the  
camera/computer power.  
Failing to do so may cause damage to the  
camera and computer.  
Preparation:  
Set the camera’s power/mode switch to OFF.  
1) Drag & drop the recording medium icon  
on the desktop into the [Trash] icon. If  
the confirmation message appears, click  
[OK].  
To AC Outlet  
AC Adapter  
2) Confirm that the access/charge lamp on  
the camera does not light or blink. If the  
access/charge lamp lights or blinks, wait  
until it is turned off before proceeding.  
3) Disconnect the USB cable.  
DC Connector  
4) Turn off the camera and computer.  
USB Connector  
USB Cable  
USB Connector  
NOTES  
Never disconnect the USB cable while the  
access/charge lamp on the camera lights or  
blinks.  
Do not turn off the camera when the USB  
cable is connected, to prevent malfunctions  
of the computer.  
Connect the camera directly to the  
computer, not through a hub.  
Do not use an extension USB cable.  
When you copy files from the computer to  
the recording medium on the camera, do not  
include any other files than those recorded  
on the camera.  
Do not delete, move, or rename the files and  
folders in the camera from the computer.  
62  
5 Select the folder that you want to  
back up, and drag & drop it into the  
folder you created in step 1.  
File Backup on the Macintosh  
Preparation:  
Connect the camera to the computer with the  
USB cable. (p. 64)  
SD_VIDEO:  
Folder that contains video files. If you  
want to back up files individually, open  
this folder, and drag & drop files such as  
[PRG001] one by one.  
1 On the computer, create a folder to  
back up files into.  
DCIM:  
Folder that contains still image files. If  
you want to back up files individually,  
open this folder, and drag & drop files  
such as [PIC_0001.JPG] one by one.  
2 Set the camera’s power/mode switch  
to ON.  
3 On the camera, select [PLAYBACK  
ON PC].  
NOTE  
PLAYBACK ON PC  
BACK UP  
For further details on the use of folders, see  
page 64.  
SELECT SET  
QUIT  
4 On the computer, double-click  
[EVERIO_HDD] or [EVERIO_SD].  
63  
Folder Structure and Extensions  
Recording medium  
X = number  
[DCIM]  
Contains the still image folders.  
Still image file  
[XXXJVCSO]  
[PIC_XXXX.JPG]  
[PIC_XXXX.JPG]  
[XXXJVCSO]  
[XXXJVCSO]  
[SD_VIDEO]  
[MGR_INFO]  
[PRGXXX]  
[PRGXXX.PGI]  
Contains the video file folders.  
Management information* for the media as a  
whole  
Management information*  
Video file  
[MOVXXX.TOD]  
[MOVXXX.MOI]  
Management information* for the video file  
[PRGXXX]  
[PRGXXX]  
After backing up to a PC, the video files which  
were edited on a PC and then recopied to the  
camera are saved. Video files with defective  
management information are also saved.  
[EXTMOV]  
[MOV_XXXX.TPD]  
[MOV_XXXX.TPD]  
[MOV_XXXX.TPD]  
[MISC]  
[PRIVATE]  
Contains folders with DPOF setting data.  
Contains management information files of event  
information and/or DVD creation for the files taken  
with the camera.  
* Information such as the date and time of recording, recorded with the video file.  
Extensions  
Video files  
Still image files  
: “.TOD”  
: “.jpg”  
The file extension may not appear depending on the [FOLDER] option setting of Windows®.  
64  
Customer Support Information  
Contact us for information on the provided software  
Use of this software is authorized according to the terms of the software license.  
JVC  
When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide  
software, please have the following information ready.  
Product Name  
Model  
Problem  
PC  
Manufacturer  
Model (Desktop/Laptop)  
CPU  
OS  
Error Message  
Memory (MB)  
Available Hard Disk Space (GB)  
Please note that it may take some time to respond to your questions, depending on their subject  
matter.  
JVC cannot answer questions regarding basic operation of your PC, or questions regarding  
specifications or performance of the OS, other applications or drivers.  
CyberLink  
Telephone/fax support  
Office hours  
(Mon. to Fri.)  
Location  
Language  
Phone #  
Fax #  
English / German /  
French / Spanish /  
Italian  
9:00 am to  
5:00 pm  
Germany  
+49-700-462-92375 +49-241-70525-25  
9:00 am to  
6:00 pm  
+886-2-8667-1298  
+886-2-8667-1300  
ext. 333  
Taiwan  
Japan  
Mandarin  
Japanese  
10:00 am to  
5:00 pm  
+81-3-3516-9555  
Paid voice support  
Lines are open  
(Mon. to Fri.)  
Location  
Language  
English  
URL  
1:00 pm to 10:00 pm  
CST  
new_site/voice_support.jsp  
U.S.A.  
Support web/e-mail  
Language  
URL/e-mail address  
index.html  
English  
German / French / Spanish /  
Italian  
Japanese  
65  
FURTHER INFORMATION  
Changing the Menu Settings  
1 Select the menu mode.  
3 Select the desired second menu item.  
For details on each menu, see below.  
GENERAL  
Select  
DISPLAY  
DISPLAY ON TV  
MENU  
LANGUAGE  
CLOCK ADJUST  
DATE DISPLAY STYLE  
Set  
2 Select the desired first menu item.  
SELECT SET  
QUIT  
!:VIDEO  
4 Select the desired setting.  
#: IMAGE  
Select  
Set  
DEMO MODE  
Y: GENERAL  
Q: OUTPUT SETTING  
_: MEDIA  
ON  
OFF  
Select  
SELECT SET  
QUIT  
¬
8 To return to the previous screen  
Move the set lever to £.  
8 To exit the screen  
Press the MENU button.  
Set  
VIDEO  
SCENE COUNTER  
EXTERNAL MIC LEVEL  
QUALITY  
ZOOM  
OIS  
SELECT SET  
QUIT  
Menus  
Settings: [ ] = Factory-preset  
[FHD]: Record in 1920 x 1080i (full high-definition),  
VBR (Variable Bit Rate).  
SP: Record in 1440 x 1080i (high-definition), VBR  
(Variable Bit Rate). Select this to record in the  
higher picture quality.  
LP: Record in 1440 x 1080i (high-definition), VBR  
(Variable Bit Rate). Select this in order to record for  
a long time.  
1440 CBR: Record in 1440 x 1080i (high-definition),  
CBR (Constant Bit Rate). Select this to copy a  
recorded video in high-definition using the i.LINK  
connector.  
nQUALITY  
Sets the picture quality for  
videos.  
NOTE  
If you switch the quality settings between FHD/SP/LP and  
1440 CBR, a new file management folder is created in the  
HDD or microSD card. (SP and LP files are stored in same  
folders.) If you change the settings frequently, you may not  
be able to record due to a limited quantity of folders. In this  
case, perform the operation on page 77.  
66  
Menus  
Settings: [ ] = Factory-preset  
[10X] / 40X / 200X  
@ZOOM  
NOTE  
Sets the maximum zoom ratio.  
Optical zoom is used up to 10X. Digital zoom is used from  
more than 10X up to the selected zoom ratio.  
OFF: Disables the function.  
[ON]: Activates the function.  
NOTES  
qOIS  
Complete stabilization may not be possible if hand shake  
is excessive, or depending on the shooting conditions.  
Compensates for hand shake.  
Switch off this mode when recording with the camera on a  
tripod.  
[GAIN UP  
OFF: Disables the function.  
Makes the subject appear bright  
automatically when you record in  
dark places. However, the overall  
color tones appear grayish.  
[AGC]: Electrically brightens the scene in dark place.  
AUTO: Automatically brightens the scene when it is  
dark. (Becomes brighter than AGC)  
[OFF]: Disables the function.  
ON: Activates the function.  
oWIND CUT  
Reduces noise caused by wind.  
[HDD] / SD  
NOTE  
/REC MEDIA FOR VIDEO  
Sets the recording medium for  
videos.  
When set to [SD], video picture quality will be automatically  
set to [SP].  
OFF: Disables the function.  
[ON]: Activates the function.  
hSCENE COUNTER  
Displays the scene counter.  
YEXTERNAL MIC LEVEL  
Displays the input level when the  
external microphone (optional) is  
connected.  
OFF: Disables the function.  
[ON]: Activates the function.  
[OFF]: Disables the function.  
ON: Activates the function.  
NOTE  
It is recommend to set x.v.ColorTM to [OFF] before the  
recording if the recorded video will be edited with a software.  
Xx.v.Color  
Records video in the color  
range suitable for viewing in an  
x.v.ColorTM compliant TV.  
nQUALITY  
[FINE] / STANDARD  
Sets the picture quality for still  
images.  
yIMAGE SIZE  
Selects the picture size for still  
images.  
[1920 x 1080] / 1440 x 1080 / 1024 x 768 / 640 x 480  
[AUTO] / 100 / 200 / 400  
2GAIN  
Sets the ISO setting to increase  
the sensitivity in dark conditions.  
67  
Changing the Menu Settings (Continued)  
Menus  
Settings: [ ] = Factory-preset  
[OFF]: Disables the function.  
ON: Activates the function.  
BRACKETING: Activates the bracket shooting function.  
In addition to an image with the exposure set by  
the camera, two other images are recorded with  
exposure values shifted to the +0.3 EV and 0.3 EV  
sides.You can select the image that has a suitable  
exposure after shooting.  
{CONTINUOUS SHOOTING  
Records still images continuously  
while the SNAPSHOT button is  
pressed.  
NOTES  
The interval between recording still images is approx. 0.5  
seconds.  
Continuous shooting may not work well depending on the  
recording medium.  
The continuous shooting speed will drop if this function is  
used repeatedly.  
[OFF] / 2SEC / 10SEC  
NOTES  
zSELF-TIMER  
Starts recording when the  
set time elapses after the  
SNAPSHOT button is pressed.  
You can confirm the countdown on the camera screen.  
You can also use this to prevent vibration by the hand.  
3REC MEDIA FOR IMAGE  
Sets the recording medium for  
still images.  
[HDD] / SD  
9LANGUAGE  
Sets the display language.  
(p. 17)  
[ENGLISH]  
You have a choice of 21 languages.  
:CLOCK ADJUST  
DATE / TIME  
Sets the time. (p. 17)  
DATE STYLE:  
[month.day.year] / year.month.day / day.month.year  
TIME:  
24h / [12h]  
;DATE DISPLAY STYLE  
Sets the date and time display  
format.  
[AUTO]: The date/time appears for approx. 5 seconds in  
the following cases.  
<DATE/TIME  
When the power/mode switch is set from OFF to ON  
When playback starts  
Displays the current time on the  
LCD monitor.  
ON: The date/time is always displayed.  
OFF: The date/time does not appear.  
EXECUTE: Performs this function.  
[CANCEL]: Returns to the menu screen without  
executing reset.  
ZPRESET  
Returns all the camera settings  
to their default values.  
68  
Menus  
Settings: [ ] = Factory-preset  
\BRIGHT  
Adjust the brightness of the display by moving the set  
lever to £/ ¤, then press down.  
Sets the brightness of the LCD  
monitor.  
BRIGHTER / STANDARD / [AUTO]  
NOTE  
When you select [AUTO], the brightness will automatically  
be set to [BRIGHTER] when you use the camera outdoors  
and to [STANDARD] when you use the camera indoors.  
CMONITOR BACKLIGHT  
Enables you to adjust the  
brightness of backlight on the  
monitor.  
OFF: Disables the function.  
[ON]: Activates the function.  
^DROP DETECTION  
Prevents damage to the  
HDD by turning off the power  
automatically when it is detected  
that the camera dropped.  
To turn the camera on when the drop detection  
worked, set the power/mode switch to OFF, and to  
ON again.  
CAUTION  
Setting this function to off increases the risks of damaging  
the built-in hard disk if the camera is accidentally dropped.  
NFOCUS ASSIST  
When this function is used, the  
outline of the focused object is  
displayed in the selected color.  
[BLUE] / RED / GREEN  
]REMOTE  
OFF: The camera does not receive the signal from the  
remote control.  
[ON]: Enables operation with the remote control.  
Turns reception of the operation  
signal from the remote control  
on/off.  
OFF: Disables the function.  
[ON]: Activates the function.  
NOTES  
[DEMO MODE  
Introduces special features of  
the camera when there is no  
operation for about 3 minutes  
during recording mode.  
The demonstration only works when the AC adapter is  
connected, not with the battery.  
If a microSD card is in the camera, demonstration will not  
take place even if this mode is set to [ON].  
OFF: Turns off the operation sound.  
[MELODY]: The melody sounds when operations are  
performed.  
\OPERATION SOUND  
Turns the operation sound on/off.  
OFF: Turns off the on-screen display.  
[ON]: Turns on the on-screen display.  
lDISPLAY  
Displays the on-screen display.  
[OFF]: Does not display on TV.  
ON: Displays on TV.  
NOTE  
%DISPLAY ON TV  
Displays camera’s on-screen  
display on a TV screen.  
When connected to a TV using the i.LINK connector, the  
camera’s on-screen display is not displayed on the TV, even  
if this setting is [ON].  
69  
Changing the Menu Settings (Continued)  
Menus  
Settings: [ ] = Factory-preset  
RVIDEO OUTPUT  
Set the aspect (16:9/4:3) to  
the screen of the connected  
television when outputting videos  
from the AV connector.  
[16:9] / 4:3  
SCOMPONENT OUTPUT  
Sets the definition of the video  
output from the COMPONENT  
connector.  
[480i]: Outputs at 480i.  
1080i: Outputs at 1080i.  
[AUTO1]: The definition that best suits the connected  
device is automatically selected: 480i, 480p, 1080i  
or 1080p*.  
THDMI OUTPUT  
AUTO2: The definition that best suits the connected  
device is automatically selected: 480i, 480p or 1080i.  
480p: Outputs at 480p. Select when the video is not  
projected correctly.  
Sets the definition of the video  
output from the HDMI connector.  
* Playback mode only  
UHDMI COLOR SETTING  
Sets the video format of the  
video output from the HDMI  
connector.  
[AUTO]: Select this under normal circumstances.  
RGB: Select this when the video is not projected  
correctly.  
VHDMI ENHANCE SETTING  
Automatically adjusts the image  
quality (depth of color, dark color  
suppression, etc.) of video output  
when connecting to the TV’s DVI  
connector.  
[OFF]: Image quality is not automatically adjusted.  
ON: Image quality is automatically adjusted.  
Wi.LINK OUTPUT (DUB)  
Sets the video output according  
to the device connected or  
picture quality of the copied files  
when using the i.LINK connector  
to copy files.  
DV: Outputs FHD/SP/LP/1440 CBR videos. Select this  
when copying with a device that supports DV input.  
[1440 CBR]: Outputs 1440 CBR videos only. Select this  
when copying video that was recorded with [1440  
CBR] set in [QUALITY].  
70  
Menus  
Settings: [ ] = Factory-preset  
Connect the AC adapter.  
EXECUTE: Performs this function. Select [OK] when  
completed.  
[CANCEL]: Cancels this function.  
1CLEAN-UP HDD  
Writing speed to HDD tends to  
become slow after long periods  
of repeated use. Execute cleanup  
periodically to regain the writing  
speed.  
NOTE  
Depending on the condition of the HDD, it may take several  
minutes for the cleanup process to be completed.  
EXECUTE: Performs this function. Select [OK] when  
completed.  
[CANCEL]: Cancels this function.  
2FORMAT HDD  
Ensures stable speeds and  
operation when accessing the  
hard disk drive.  
NOTES  
Be aware that all files and data including protected files  
will be erased by the formatting process.  
Do not format the hard disk of the camera by your PC.  
EXECUTE: Performs this function. Select [OK] when  
completed.  
[CANCEL]: Cancels this function.  
NOTES  
,FORMAT SD CARD  
You have to format newly  
purchased microSD cards with  
this camera before using them.  
This will also ensure stable  
speeds and operation when  
accessing the microSD card.  
Be aware that all files and data including protected files  
will be erased by the formatting process.  
Do not format the microSD card in the camera by your  
PC.  
Connect the AC adapter.  
EXECUTE: Performs this function. Select [OK] when  
completed.  
[CANCEL]: Cancels this function.  
0DELETE DATA ON HDD  
When you dispose of the  
camera, perform this to make it  
difficult to recover data on the  
HDD.  
NOTE  
In addition to this operation, it is recommended that you use  
a commercially available date erasing software to eliminate  
the risk of data recovery.  
-VIDEO NO. RESET  
.IMAGE NO. RESET  
By resetting the file number  
(name), a new folder is made.  
The new files will be stored in the  
new folder.  
It is convenient to separate  
the new files from previously  
recorded files.  
EXECUTE: Performs this function. Select [OK] when  
completed.  
[CANCEL]: Cancels this function.  
71  
Troubleshooting  
The camera is a microcomputer-controlled  
device. External noise and interference (from  
a TV, a radio, etc.) might prevent it from  
functioning properly.  
To solve the problem, first follow the  
instructions below.  
If the problem is not solved, reset the  
camera. (p. 76)  
If the problem persists, please consult your  
nearest JVC dealer.  
The following phenomena are not  
malfunctions.  
The camera heats up when it is used for a  
long time.  
The battery heats up during charging.  
When playing back a video file, the  
image stops momentarily or the sound is  
interrupted at junctions between scenes.  
Trouble  
Action  
Check that the microSD card is facing the right direction.  
Cannot insert the  
microSD card.  
Connect the AC adapter correctly.  
Recharge the battery.  
No power is supplied.  
When the camera has warmed up after being cold, the camera  
may switch itself off to check it is operating correctly.  
After the low  
temperature message  
is displayed, the  
power turns off when  
the camera warms up.  
When you turn on/off the power, the lens cover opens/closes  
automatically and this causes a sound. This is not a malfunction.  
There is a sound  
when turning on/off  
the power.  
Set the power/mode switch to ON.  
Press the PLAY/REC button to select the recording mode.  
Recording cannot be  
performed.  
If the camera temperature increases, REC flashes in the LCD  
monitor. If the temperature continues to increase, operation stops  
automatically to protect the HDD.  
Move to a place where the camera is not affected by excessive  
sound or vibration.  
Recording stops automatically after 12 hours of continuous  
recording.  
Recording stops by  
itself.  
Clean any dirt or water droplets from the lens.  
Set focus to the automatic mode.  
If you are recording in a dark place or a subject that has no  
contrast between dark and light, adjust the focus manually.  
The focus is  
not adjusted  
automatically.  
Use backlight compensation or Nightalive.  
Set the brightness to the [+] side.  
For videos, set [GAIN UP] in the video menu to [AGC] or [AUTO].  
For still images, set [GAIN] in the image menu to [AUTO] or [400].  
The recorded subject  
is too dark.  
72  
Trouble  
Action  
Set the backlight compensation to [OFF] if it is being used.  
Set the brightness to the [-] side.  
The recorded subject  
is too bright.  
Keep the zoom ratio below 10X.  
Cannot use spot  
exposure control.  
If there are numerous light sources etc. behind the subject, set the  
white balance to [MWB].  
The color of the  
recorded subject  
looks strange.  
This type of phenomenon may occur when shooting a subject  
illuminated by bright light. This is not a malfunction.  
Bright vertical lines  
appear on recorded  
images.  
Change [ZOOM] in the video menu to [40x] or [200x].  
Digital zoom does not  
work.  
This cannot be used if [SEPIA] or [MONOTONE] are selected as  
effects.  
Do not use [TWILIGHT] from program AE.  
White balance setting  
cannot be activated.  
The continuous shooting speed will drop after continuous shots.  
Continuous shooting speed may drop depending on the recording  
media or under certain recording conditions.  
The continuous  
shooting speed is  
slow.  
Set [DATE/TIME] in the general menu to [ON].  
The date/time does  
not appear.  
Check the indication that represents that function.  
If the indication is flashing or off, you have selected two functions  
that cannot be used together. Choose which of the functions to  
use.  
A function cannot be  
activated.  
Deactivate Nightalive, [SHUTTER SPEED] or [EFFECT].  
Video movement  
appears jerky/like it is  
frame dropping.  
You have selected two functions that cannot be used together.  
Choose which of the functions to use.  
The indication display  
flashes or goes out.  
Operate the camera.  
The LCD monitor  
appears blank.  
(When using the AC adapter, if the camera is not operated for a  
certain length of time it will enter sleep mode, the video/still image  
mode lamp lights, and the LCD backlight turns off.)  
Fully charge the battery, run it down, and then recharge it again.  
If the camera is used for long periods of time in high or low  
temperatures, or if the battery is repeatedly charged, the amount  
of remaining battery may not be displayed correctly.  
The remaining battery  
display is not correct.  
73  
Troubleshooting (Continued)  
Trouble  
Action  
If the LCD monitor or surrounding parts have been pressed,  
remove your hand and leave the camera for a short while.  
(Applying pressure causes image unevenness.)  
The LCD monitor  
display is uneven.  
Adjust the brightness and angle of the LCD monitor.  
The LCD monitor appears dark when used in cold places. This is  
not a malfunction.  
The LCD monitor may be reaching the end of its service life.  
Consult your nearest JVC dealer or the JVC customer service.  
Images on the LCD  
monitor appear dark  
or whitish.  
The LCD monitor may be difficult to see if used in bright areas  
such as under direct sunlight.  
The LCD monitor is  
difficult to see.  
Replace the microSD card.  
The same scene  
appears stopped for a  
long time.  
(If there are scratches etc. on the microSD card, the camera will  
have difficulty reading the data, and this phenomenon may occur.  
The camera will try to play back as much as possible, but if this  
condition continues, the camera will not be able to play back the  
video and it will automatically stop.)  
Video movement  
appears jerky.  
Perform cleanup or formatting.  
Sometimes playback is interrupted at the connecting section  
between two scenes.  
Sound or video are  
interrupted.  
Do not move the camera suddenly during recording. (If the camera  
is moved suddenly during recording, the driving sound (hum) of  
the hard disk may have been recorded.)  
Noise can be heard.  
Change [VIDEO OUTPUT] in the output setting menu to match  
your TV.  
Images look unnatural  
on the TV (long and  
thin etc.)  
Change [HDMI OUTPUT] in the output setting menu to [AUTO].  
A part of the TV  
screen appears to be  
shaking.  
Select [PLAYBACK TPD FILE] in the function menu, then search  
the video file on the index screen.  
(Video files that have damaged management information or video  
files that were written back from a computer can be played.)  
Cannot find a  
recorded video.  
When recording the white balance was not correctly adjusted  
When the video was recorded with x.v.ColorTM set to [ON], change  
the setting as desired on TV.  
The color of images  
looks strange.  
74  
Trouble  
Action  
The following functions cannot be used for a backup DVD.  
[When playing back video]  
- Special playback (forward slow motion, reverse slow motion,  
frame-by-frame forward, frame-by-frame back)  
- Saving still images from video playback  
- Search index by date  
Some functions  
cannot be used when  
playing back a backup  
DVD through a DVD  
burner connected to  
the camera.  
- Playback effects  
- Playback zoom (remote control function)  
[When playing back still image]  
- Rotate 90 degrees  
- INFO button (file information, histogram)  
- Playback effects  
- Playback zoom (remote control function)  
Mosaic-type noise may occur when recording under the following  
conditions.  
- When there is a complicated pattern in the background  
- If the camera is moved around a lot, or moved quickly  
- When recording a subject that moves quickly (especially when  
recording in [LP] mode)  
When playing back  
video, mosaic-type  
noise may occur on  
the playback screen.  
Check all of the following.  
High-definition  
dubbing cannot be  
performed to a HDV  
device.  
- Record with [QUALITY] in the video menu set to [1440 CBR].  
- Create a playlist, then dub the playlist. (Dubbing cannot be done  
for each video file.)  
- When dubbing, set [i.LINK OUTPUT (DUB)] in the output setting  
menu to [1440 CBR].  
Operate the camera.  
(The camera cannot be operated from the PC.)  
When connected  
with an i.LINK cable,  
the camera does not  
operate if controls are  
attempted from the  
PC etc.  
When dubbing high-definition videos to a connected HDV device,  
do not include [FHD] or [SP] quality videos in the playlist.  
(When the playlist is being played back, these videos will not be  
played.)  
Set [i.LINK OUTPUT (DUB)] in the output setting menu to [DV],  
and dub to a DV camera or DVD recorder using standard quality  
dubbing.  
When dubbing a  
playlist, some videos  
cannot be played  
back.  
Connect using a audio/video cable, and dub to an analog device  
using standard quality dubbing.  
Operate the video device manually to start and stop recording.  
When dubbing, the  
connected video  
device does not  
start recording  
automatically.  
75  
Troubleshooting (Continued)  
Trouble  
Action  
Copy all files from the media onto your computer, and erase the  
files from the media.  
(If there are many still images (more than 1,000 files) on the  
media, it takes time for the camera to process the files.)  
The camera operates  
slowly when  
switching between  
video mode and still  
image mode, or when  
switching the power  
on or off.  
This is not a malfunction.  
The camera gets hot.  
Check the remaining battery charge.  
(When the battery is fully charged, the lamp does not flash.)  
When recharging in either a hot or cold environment, ensure that  
battery is being charged within the permitted temperature range.  
(If the battery is being recharged outside the permitted  
temperature range, recharging may stop to protect the battery.)  
The lamp does not  
flash during battery  
charging.  
Replace the batteries.  
Set [REMOTE] in the general menu to [ON].  
The remote control may not operate outdoors or in places  
exposed to strong light.  
The remote control  
doesn’t work.  
8 The following phenomena are not malfunctions.  
LCD monitor momentarily becomes red or black when sunlight is recorded.  
Black spots, or red, green, or blue spots appear on the LCD monitor.  
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be  
ineffective.)  
8 Maintaining HDD Performance  
Periodically perform [CLEAN-UP HDD].  
8 If a malfunction occurs in the HDD  
!Perform [CLEAN-UP HDD].  
#If this does not solve the malfunction, perform [FORMAT HDD]. (All data is deleted.)  
$If this does not solve the problem, perform the disc check function from a PC after  
formatting.  
%If this does not solve the problem, contact the JVC customer service for repairs.  
8 To reset the camera  
!Set the power/mode switch to OFF and remove the power supply (battery pack or AC  
adapter) from the camera, then reattach it.  
#Execute [PRESET] in the general menu. (p. 68)  
76  
Warning Indications  
Indication  
Meaning/Action  
Erase files. Move onto media such as a computer.  
HARD DISK DRIVE IS FULL  
MEMORY CARD IS FULL  
Erase files. Move onto media such as a computer. Replace  
with a new microSD card.  
Detach the battery pack once and re-attach it firmly.  
Remove and re-insert the microSD card.  
Use a supported file format.  
COMMUNICATING ERROR  
INCOMPATIBLE FORMAT  
UNSUPPORTED FILE!  
Record some still images.  
NO SUPPORTED FILES  
Perform the following operations in order.  
!Backup files onto a PC etc.  
#Select [FORMAT HDD] in the media menu. (For microSD  
cards, select [FORMAT SD CARD].)  
$Select [EXECUTE].  
NUMBER OF FOLDERS  
OVERFLOW  
%While holding down the event button, press the set lever.  
Check that the power of the connected USB device is on.  
POWER NOT ON OR USB  
DEVICE NOT COMPATIBLE  
[microSD card]  
Check whether the microSD card has been checked for  
operability.  
RECORDING FAILURE  
[HDD]  
Perform cleanup.  
Do not allow the camera to be subject to impact/vibrations.  
Select [OK] and stop recording.  
Use the camera in areas where it will not be subject to impact/  
vibrations.  
RECORDING CANCELLED  
Switch off the [PROTECT] function in the function menu.  
THIS FILE IS PROTECTED  
NUMBER OF PRINTS ERROR  
EVENT LIST EMPTY  
Set between 1~999 images.  
Set the event.  
Create a playlist.  
NO PLAYLIST  
NO REGISTERED SCENES IN  
PLAYLIST  
SOME OF SCENES MAY NOT  
BE PLAYED BACK  
Reduce the number of videos that can be registered to a  
playlist to less than 99 files.  
PROCESSING CANCELLED  
DUE TO LACK OF SPACE  
FOR OPERATION  
77  
Warning Indications (Continued)  
Indication  
Meaning/Action  
Remove and re-insert the microSD card. (Multimedia cards  
cannot be used.)  
Remove any dirt from the microSD card terminals.  
Insert the microSD card before switching the power on.  
MEMORY CARD ERROR!  
Perform cleanup or formatting.  
HDD ERROR!  
Check the operating procedure, and perform once again.  
RECORDING MAY NOT BE  
CORRECT ON THE MEMORY  
CARD  
MEMORY CARD CANNOT BE  
PLAYED BACK CORRECTLY  
MAY NOT RECORD HARD  
DISK DRIVE CORRECTLY  
CANNOT PLAYBACK HARD  
DISK DRIVE CORRECTLY  
Perform formatting.  
THIS CARD IS NOT  
FORMATTED  
Set the date and time. (If the display does not disappear  
after completing the settings, the clock battery is exhausted.  
Consult your nearest JVC dealer.)  
SET DATE/TIME!  
Select [OK] to restore.  
VIDEO MANAGEMENT  
FILE IS BROKEN TO  
RECORD/PLAYBACK VIDEO,  
RECOVERY IS REQUIRED  
RECOVER?  
Set the video media in the video menu to [HDD].  
Replace the microSD card. (Cards that have been recorded on  
using anything other than JVC high-definition hard disk movies  
cannot be used.)  
CANNOT USE IN VIDEO  
MODE  
78  
Cleaning  
Before cleaning, turn off the camera and remove the battery pack and AC adapter.  
8 To clean the exterior  
Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild  
soap and wring it out well. After wiping with the wet cloth, wipe again with a dry cloth.  
8 To clean the LCD monitor  
Wipe gently with a soft cloth. Be careful not to damage the monitor.  
8 To clean the lens  
Wipe gently with lens cleaning paper.  
NOTES  
Avoid using strong cleaning agents such as benzine or alcohol.  
Mold may form if the lens is left dirty.  
When using a cleaner or chemically treated cloth, refer to the cautions for each product.  
79  
Specifications  
8 For still image  
Format  
Camera  
JPEG  
Image size  
4 modes: 1920 x 1080  
1440 x 1080  
1024 x 768  
8 For general  
Power supply  
DC 11 V (Using AC adapter)  
DC 7.2 V (Using battery pack)  
Power consumption  
640 x 480  
GZ-HD5  
Approx. 6.9 W  
Approx. 7.1 W  
Picture quality  
2 modes: FINE / STANDARD  
GZ-HD6  
Dimensions (W x H x D)  
GZ-HD5  
78 mm x 73 mm x 130 mm  
8 For connectors  
(3-1/8" x 2-7/8" x 5-1/8")  
HDMI  
GZ-HD6  
79 mm x 73 mm x 138 mm  
HDMITM (V.1.3 with x.v.ColorTM  
Component output  
)
(3-1/8" x 2-7/8" x 5-7/16")  
Weight  
GZ-HD5  
Y, Pb, Pr component output  
Y: 1.0 V (p-p), 75 Ω  
Pb/Pr: 0.7 V (p-p), 75 Ω  
i.LINK output  
4-pin (i.LINK/IEEE1394 compliant)  
AV output  
Video output: 1.0 V (p-p), 75 Ω  
Audio output: 300 mV (rms), 1 kΩ  
USB  
Mini USB type A and type B,  
USB 2.0 compliant  
Microphone  
ø3.5 mm stereo mini jack  
GZ-HD6  
Approx. 480 g (1.06 lbs) (incl. strap)  
Approx. 565 g (1.25 lbs) (incl. battery  
and strap)  
Approx. 505 g (1.12 lbs) (incl. strap)  
Approx. 590 g (1.31 lbs) (incl. battery  
GZ-HD6  
and strap)  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Operating humidity  
35% to 80%  
Storage temperature  
–20°C to 50°C (–4°F to 122°F)  
Pickup  
Headphone  
1/5" (570,000 pixels) progressive CCD  
Lens  
ø3.5 mm stereo mini jack  
F 1.8 to 1.9,  
f = 3.3 mm to 33.0 mm,  
10:1 power zoom lens  
Filter diameter  
ø43.0 mm  
LCD monitor  
2.8" diagonally measured,  
LCD panel/TFT active matrix system  
Speaker  
AC Adapter  
Power requirement  
AC 110 V to 240 Vd, 50 Hz/60 Hz  
Output  
DC 11 V  
, 1 A  
§
Monaural  
8 For video/audio  
Format  
SD-VIDEO  
Recording/Playback format  
Video:  
MPEG-2 TS  
Audio:  
MPEG-1 Layer 2  
Signal format  
1080/60i  
Recording mode (video)  
FHD:  
VBR, average of 26.6 Mbps  
SP:  
LP:  
VBR, average of 19 Mbps  
VBR, average of 11.1 Mbps  
1440 CBR: CBR, 27 Mbps  
Recording mode (audio)  
48 kHz, 384 kbps  
80  
Dimensions (W x H x D)  
42 mm x 14.5 mm x 91 mm  
(1-11/16" x 5/8" x 3-5/8")  
Weight  
Approx. 30 g (0.07 lbs)  
(incl. battery)  
Remote Control  
Power supply  
DC 3 V  
Battery life  
Approx. 1 year  
(depending on the frequency of use)  
Operating distance  
Within 5 m (16.4 ft)  
Operating temperature  
0°C to 40°C (32°F to 104°F)  
Design and specifications subject to change  
without notice.  
Approximate recording time (minutes) (for video)  
Recording medium  
HDD  
microSD Card  
GZ-HD5  
GZ-HD6  
4 GB  
Quality  
FHD  
60 GB  
120 GB  
300  
420  
720  
300  
600  
840  
25  
SP  
LP  
1440  
600  
1440 CBR  
Approximate number of storable images (for still image)  
Recording medium  
HDD  
microSD Card  
GZ-HD5  
GZ-HD6  
512 MB  
1 GB  
2 GB  
4 GB  
Image size/Quality  
60 GB  
120 GB  
1920 x 1080 / FINE  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
9999  
535  
840  
1065  
1670  
1405  
2205  
2810  
4115  
6870  
9999  
2115  
3225  
2785  
4380  
5575  
8765  
9999  
9999  
4220  
6445  
5565  
8750  
9999  
9999  
9999  
9999  
1920 x 1080 / STANDARD  
1440 x 1080 / FINE  
705  
1440 x 1080 / STANDARD  
1024 x 768 / FINE  
1110  
1415  
2225  
3465  
6235  
1024 x 768 / STANDARD  
640 x 480 / FINE  
640 x 480 / STANDARD  
81  
Cautions  
... fully charge and then fully discharge the  
battery every 6 months when storing the  
battery pack over a long period of time.  
... remove from charger or powered unit when  
not in use, as some machines use current  
even when switched off.  
AC Adapter  
When using the AC adapter in areas other  
than the USA  
The provided AC adapter features automatic  
voltage selection in the AC range from 110 V to  
240 V.  
USING HOUSEHOLD AC PLUG ADAPTER  
In case of connecting the unit’s power cord to  
an AC wall outlet other than American National  
Standard C73 series type use an AC plug  
adapter, called a “Siemens Plug”, as shown.  
For this AC plug adapter, consult your nearest  
JVC dealer.  
Recording Medium  
Be sure to follow the guidelines below  
to prevent corruption or damage to your  
recorded data.  
Do not bend or drop the recording medium, or  
subject it to strong pressure, jolts or vibrations.  
Plug Adapter  
Do not splash the recording medium with water.  
Do not use, replace, or store the recording  
medium in locations that are exposed to strong  
static electricity or electrical noise.  
Do not turn off the camera power or remove  
the battery or AC adapter during shooting,  
playback, or when otherwise accessing the  
recording medium.  
Battery Packs  
Do not bring the recording medium near objects  
that have a strong magnetic field or that emit  
strong electromagnetic waves.  
Do not store the recording medium in locations  
with high temperature or high humidity.  
The supplied battery pack  
is a lithium-ion battery.  
Before using the supplied  
battery pack or an optional  
battery pack, be sure to  
read the following cautions:  
Terminals  
Do not touch the metal parts.  
When formatting or erasing data using the  
camera, only the file administration information  
is changed. The data is not completely erased  
from the hard disk. If you want to completely  
erase all of the data, we recommend either  
using commercially available software that  
is specially designed for that purpose, or  
by physically destroying the camera with a  
hammer etc.  
To avoid hazards  
... do not burn.  
... do not short-circuit the terminals. Keep it away  
from metallic objects when not in use. When  
transporting, make sure the provided battery  
cap is attached to the battery. If the battery  
cap is misplaced, carry the battery in a plastic  
bag.  
Hard disk  
... do not modify or disassemble.  
Do not use the unit where it is subject to  
vibrations or loud sounds.  
If you move the unit suddenly, the drop  
detection function may operate and the power  
may be turned off.  
... do not expose the battery to temperatures  
exceeding 60°C (140°F), as this may cause  
the battery to overheat, explode or catch fire.  
... use only specified chargers.  
To prevent damage and prolong service life  
... do not subject to unnecessary shock.  
... charge within the temperature range of 10°C  
to 35°C (50°F to 95°F). This is a chemical  
reaction type battery — cooler temperatures  
impede chemical reaction, while warmer  
temperatures can prevent complete charging.  
... store in a cool, dry place. Extended exposure  
to high temperatures will increase natural  
discharge and shorten service life.  
LCD Monitor  
To prevent damage to the LCD monitor, DO  
NOT  
... push it strongly or apply any shocks.  
... place the camera with LCD monitor on the  
bottom.  
To prolong service life  
... avoid rubbing it with coarse cloth.  
82  
To prevent the unit from dropping,  
Main Unit  
Attach the shoulder strap securely and fasten  
the grip belt securely.  
For safety, DO NOT  
... open the camera’s chassis.  
When using the camera with a tripod, attach the  
camera to the tripod securely.  
... disassemble or modify the unit.  
... allow inflammables, water or metallic objects  
to enter the unit.  
... remove the battery pack or disconnect the  
power supply while the power is on.  
... leave the battery pack attached when the  
camera is not in use.  
... place naked flame sources, such as lighted  
candles, on the apparatus.  
... expose the apparatus to dripping or splashing.  
... leave dust or metal objects adhered to the  
power plug or an AC wall outlet.  
... insert any objects in the camera.  
Avoid using the unit  
... in places subject to excessive humidity or dust.  
... in places subject to soot or steam such as  
near a cooking stove.  
... in places subject to excessive shock or vibration.  
... near a television set.  
... near appliances generating strong magnetic  
or electric fields (speakers, broadcasting  
antennas, etc.).  
If the camera drops, you may be injured and  
the camera may be damaged.  
When a child uses the unit, there must be  
parental guidance.  
Declaration of Conformity  
Model Number : GZ-HD5U/GZ-HD6U  
Trade Name : JVC  
Responsible party : JVC AMERICAS CORP.  
Address : 1700 Valley Road Wayne, N. J. 07470  
Telephone Number : 973-317–5000  
This device complies with Part 15 of FCC  
Rules. Operation is subject to the following  
two conditions: (1) This device may not cause  
harmful interference, and (2) this device must  
accept any interference received, including  
interference that may cause undesired  
operation.  
Changes or modifications not approved  
by JVC could void the user’s authority to  
operate the equipment. This equipment has  
been tested and found to comply with the  
limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there is  
no guarantee that interference will not occur  
in a particular installation. If this equipment  
does cause harmful interference to radio or  
television reception, which can be determined  
by turning the equipment off and on, the user is  
encouraged to try to correct the interference by  
one or more of the following measures: Reorient  
or relocate the receiving antenna. Increase the  
separation between the equipment and receiver.  
Connect the equipment into an outlet on a  
circuit different from that to which the receiver is  
connected.  
... in places subject to extremely high (over 40°C  
or 104°F) or extremely low (under 0°C or  
32°F) temperatures.  
... in places where air pressure is low (more than  
3000 m (9870 ft) above the sea level).  
DO NOT leave the unit  
... in places of over 50°C (122°F).  
... in places where humidity is extremely low  
(below 35%) or extremely high (above 80%).  
... in direct sunlight.  
... in a closed car in summer.  
... near a heater.  
... in high places such as on a TV. Leaving the  
unit in high places while a cable is connected  
may result in a malfunction if the cable is  
caught and the unit falls onto the floor.  
To protect the unit, DO NOT  
... allow it to become wet.  
... drop the unit or strike it against hard objects.  
... subject it to shock or excessive vibration  
during transportation.  
... keep the lens directed at extremely bright  
objects for long periods.  
... expose the lens to direct sunlight.  
... swing it excessively when using the hand strap.  
... swing the soft camera case excessively when  
the camera is inside it.  
... place the camera in dusty or sandy areas,  
such as on a beach.  
Consult the dealer or an experienced radio/  
TV technician for help.  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Cet appareil numérique de la classe B est  
conforme à la norme NMB-003 du Canada.  
83  
Terms  
A
AC Adapter ................................................ 16, 82  
M
Macintosh ........................................................ 61  
Manual Recording ........................................... 24  
Menu Settings ................................................. 66  
microSD Card .................................................. 18  
Monitor Backlight ............................................. 69  
Adjust Brightness ............................................ 27  
Aperture Priority .............................................. 27  
AV Connection ..................................... 36, 50, 70  
B
C
Backlight Compensation .................................. 25  
Battery Pack ........................................ 16, 23, 82  
Brightness Control (LCD Monitor) ................... 69  
N
O
Nightalive ......................................................... 25  
On-Screen Display .......................................... 69  
Operation Sound ............................................. 69  
Optical Image Stabiliser (OIS) ......................... 67  
Clean-up HDD ................................................. 71  
Clock Adjust .............................................. 17, 68  
Color Bar ......................................................... 28  
Component Connection ............................ 35, 70  
Continuous Shooting ....................................... 68  
Copying (Moving) Still Images ... 46, 50, 51, 52, 61  
Copying Video Files ....................... 46, 50, 52, 61  
P
Picture Quality ........................................... 66, 67  
Playlist ............................................................. 43  
Power-Linked Operation .................................. 12  
Preset .............................................................. 68  
Program AE ..................................................... 24  
Protecting Files ............................................... 37  
D
Date/Time ........................................................ 68  
Date Display Style ........................................... 68  
Date Index Screen ........................................... 31  
Deleting Files ............................................ 37, 71  
Deleting Playlist ............................................... 45  
Demonstration Mode ....................................... 69  
Display on TV .................................................. 69  
DPOF .............................................................. 41  
Drop Detection ................................................ 69  
DVD Burner ..................................................... 46  
DVD Recorder ................................................. 49  
R
S
Recordable Time/Number of Images ............... 81  
Recording Medium ........................ 23, 67, 68, 82  
Remote Control ................................... 11, 13, 69  
Resetting the File Number ............................... 71  
Scene Counter ................................................ 67  
Self-Timer ........................................................ 68  
Sharpness ....................................................... 28  
Shutter Speed ................................................. 27  
Slide Show ...................................................... 30  
Speaker Volume .............................................. 29  
Spot Exposure Control .................................... 26  
Still Image ................................................. 21, 30  
E
F
Effect ......................................................... 28, 32  
Event Registration ..................................... 22, 40  
Event Screen ................................................... 31  
External Microphone ................................. 13, 67  
T
Tele Macro ....................................................... 28  
Tripod Mounting ............................................... 18  
TV .............................................................. 35, 36  
File Information ................................................ 39  
Focus ............................................................... 25  
Focus Assist .............................................. 25, 69  
Formatting a Recording Medium ..................... 71  
V
VCR ................................................................. 49  
Video ......................................................... 20, 29  
W
White Balance ................................................. 27  
Wind Cut ......................................................... 67  
Windows PC .................................................... 52  
Wipe or Fader Effects ...................................... 34  
G
H
I
Gain ................................................................. 67  
Gain Up ........................................................... 67  
Hard Disk ........................................................ 82  
HDMI Connection ...................................... 35, 70  
X
Z
x.v.Color .......................................................... 67  
i.LINK Connection ..................................... 49, 70  
Image Rotation ................................................ 30  
Image Size ...................................................... 67  
Zebra ............................................................... 28  
Zooming .................................................... 22, 67  
L
Language Setting ...................................... 17, 68  
LCD Monitor ........................................ 12, 14, 82  
US  
© 2008 Victor Company of Japan, Limited  
0208FOH-AL-OT  

Attwood 9083 User Manual
Blaupunkt CASABLANCA RCM 85 User Manual
Bogen Multi Graphic 115B User Manual
Canon MV430i User Manual
Citizen Calculator SDC 368 User Manual
Eclipse Fujitsu Ten CD1200 User Manual
Elmo Cable Box CBL MTRENC4 5 User Manual
JBL GTO602 User Manual
JL Audio Stealthbox 94465 User Manual
JVC GR DVL555 User Manual