E
A
D
B
C
8
8
210.00 mm
7
7
(Fig.2)
5. Backward switch.(only applied to audio devices supporting A2DP and AVRCP
Profiles)
6. Bluetooth Volume Down switch.
7. Forward switch. (only applied to audio devices supporting A2DP and AVRCP
Profiles)
8. Bluetooth ON/OFF/Pairing/Pause switch.
a) When BT90S is powered on, press and hold (about 2 seconds) until
Bluetooth LED flashes Green to turn Bluetooth ON.
b) When BT90S is powered on, press and hold (about 4 seconds) until
Bluetooth LED flashes Green and Red alternatively to enter into pairing mode.
BT90S Bluetooth Traveller Speaker
And
c) When BT90S is powered on, press and hold (about
Bluetooth LED turns red to turn Bluetooth OFF when playing.
d) Press it once when playing --- Pause
Press it once again --- Resume play
9. Bluetooth Volume Up switch.
4
seconds) until
BT65N Bluetooth Audio Adaptor (optional)
6
6
User Manual
(Fig.3)
Environmental
friendly
10. a) Bluetooth LED flashes Green -- Bluetooth is ON
b) Bluetooth LED flashes Green and Red alternatively -- Bluetooth enters into
Pairing mode
c) Bluetooth LED is red -- Bluetooth will be powered OFF
11. Power LED is Blue -- BT90S is Power ON
5
5
I.Traveller Speaker paired with Bluetooth enabled (with A2DP and
AVRCP profiles) Mobile Phone / PDA / MP3 Guide
2
When you purchase a Standalone pack with BT90S Traveller Speaker only,
please follow this Guide.
Index
1. A/C Adapter and 3 AAA battery...............................................................1
2. Turning on / Turning off the Traveller Speaker and the Audio Adaptor.........1
3. Function Keys......................................................................................1
4
4
THREE possible User Scenarios.........................................................................2
I. Traveller Speaker paired with Bluetooth enabled (with A2DP and AVRCP
profile) Mobile Phone
/
PDA
/
MP3 Guide........................................2
1.Pairing..............................................................................................3
2.Listening to music..............................................................................3
Bluetooth Traveller Speaker
Bluetooth enabled PDA
Bluetooth mobile phone
(Fig.4)
II. Traveller Speaker paired with Stereo Audio Adaptor BT65N Guide...........4
1.Pairing...............................................................................................4
2.istening to music..............................................................................5
1. Pairing
a. While the Speaker is powered off, switch the power ON/OFF switch (Key
2) to the “I” position to turn it on (Fig.1). The Power LED (Fig.3) will
become blue. Press and hold BT ON/OFF/Pairing/Pause switch (Key 5,
III. Traveller Speaker connected directly with Audio Device Guide................5
1.listening to music..............................................................................5
Fig.2) for
4
seconds, the Bluetooth LED will flash red and green
alternatively, which indicates the Speaker in Pairing Mode. The Pairing
Mode will last for one minute.
Accessories Table...............................................................................5
FCC Interference Statement........................................................................6
b. Put the Speaker and the Bluetooth enabled (with A2DP and AVRCP
profiles) Mobile Phone / PDA / MP3 close to each other, 0.5 to 3 meters.
c. Follow the operation instructions of your Bluetooth enabled (with A2DP
and AVRCP profiles) Mobile Phone/ PDA / MP3 to start the pairing
process. Typically, this has to be done by going to a setup or connect
menu to discover the Speaker. It may take some time to search it
depending on the number of Bluetooth devices nearby.
d. Your Mobile Phone / PDA / MP3 will display the model name “BT90S“ if it
has found the Speaker; and ask for a passkey. Enter a sequence of
“0000“. After successful pairing, follow the instructions to establish the
Bluetooth connection with the Speaker.
e. If the pairing is successful, the Bluetooth LED will flash green, which
indicates it is in Standby Mode and ready to receive audio signals from the
Mobile Phone / PDA / MP3. If pairing does not occur as expected, turn the
Traveller Speaker and the audio device off. Wait for 10 seconds and
repeat the pairing process from the beginning (Fig.4).
3
3
!
A/C Adapter and 3 AAA battery
Thank you for buying the new BT90S Bluetooth Traveller Speaker and, or the
BT65N Bluetooth Stereo Audio Adaptor. You can use the A/C power adapter
(optional, not provided) to power up the BT90S directly or place 3 AAA dry
batteries into the BT90S to obtain the power.
!
!
Turning on / Turning off the Traveller Speaker
To turn on the speaker, please switch the power ON/OFF switch to the “I”
position. To turn it off, please switch the power switch to the “O” position.
Function Keys
1. Battery cover(Insert 3 AAA batteries).
2. Power ON/OFF switch.
3. DC power input socket(5VDC).
4. Audio input socket.
2. Listening to music
a. Play the music on the Mobile Phone / PDA / MP3 as normal; you will listen
to the music from the Speaker.
2
2
b. The speaker volume can be adjusted by pressing the VOL Up button
(Fig.2) / VOL Down button (Fig.2).
(Fig.1)
1
3
Note:
MATERIAL:
SIZE:
8042
MCB-8042010-0A
1
1
Lucy
2006/03/07
OTHER:
#8042 USER MANUAL
MM
A3
E
A
B
C
D
|