Ikelite HDR SR8 User Manual

P R E P A R A T I O N  
IKELITE VIDEO CASE  
SUPPLEMENTAL INSTRUCTIONS FOR  
PACKAGED WITH HOUSING__________________________________________________  
• External UR/Pro Color Filter  
• Internal Lens Shade  
#6038.92 Sony HDR SR7, SR8  
• Silicone Lubricant  
COLOR FILTER_____________________________________  
The installation and usage of the external UR/Pro  
color filter is described in the general instruction manual.  
LENS SHADE_______________________________________  
The internal lens shade helps block light reflection/  
refraction caused by the interaction of the external color  
External  
Color Filter  
Internal  
Lens Shade  
filter and the port.  
Carefully thread the lens shade on the front of the  
camera lens. The lens threads are very fine; DO NOT cross thread. It should screw on  
very easily. If it is difficult to turn, you are cross threading.  
Completely thread the lens shade into the camera to avoid any potential  
clearance or sealing problems when the camera is installed and the housing is sealed.  
SUPER-EYE VIEWFINDER_____________________________________________________  
See exactly what the camera sees underwater using the camera's electronic  
viewfinder in conjunction with the Ikelite Super-Eye, which is permanently mounted  
in the eyeport on the clear back plate. The Super-Eye extends the viewfinder image  
to provide enhanced viewing underwater.  
LCD MONITOR / EXTERNAL MIRROR_________________________________________  
The camera's LCD monitor can be viewed from the rear of the housing, using the  
external mirror featured on the side of the housing.  
Open the LCD monitor on the camera, rotate 180°, and then press it back against  
the side of the camera. The external mirror is hinged so that it can be opened to reflect  
the image from the camera's LCD monitor for viewing from the rear of the housing.  
During transportation, please remember to close the mirror by pressing it against  
the side of the housing or lid snap.  
BATTERY AND TAPE__________________________________________________________  
Install a fully charged Sony battery on the camera:  
This supplemental set of instructions describes additional features specific  
to your housing model. Prior to testing the system in the water, please read  
this supplement along with the general instruction manual to become familiar  
with its features and functions.  
Ikelite Video Cases are slightly negative in salt water for stability. This  
housing has been water pressure tested at the factory and has a working  
depth of 60m (200').  
Power  
Power Zoom  
Lid Snap  
Focus/Exposure  
HOUSING CONTROLS________________  
AS Shift  
WB Shift/  
• Power On/Off / Mode  
Cam Ctrl Dial  
• Start/Stop  
Port  
Touch  
Pad  
• Snap Shot  
Mirror  
• Power Zoom  
• Photo  
T. P.  
Bottom Bar  
Back Light/  
Manual Button  
Sony NP-FH50, NP-FH60, NP-FH70  
Other brand batteries may not fit inside the housing.  
Make sure you have loaded an appropriate digital cassette tape in the camera.  
• Auto / Manual Focus Lock  
• Camera Control Dial  
• Back Light/Manual Button  
• LCD Screen Control #1  
• LCD Screen Control #2  
• LCD Screen Control #3  
• LCD Reversing Circuit On/Off  
• Display Batt Info  
Base  
OPTIONAL WIDE ANGLE LENS_______________________________________________  
The housing’s port accepts optional 67mm threaded waterproof Wide-Angle lenses  
such as the Ikelite #6420 W-20, Epoque DCL-20 and Inon UWL-100 Type 2. These  
waterproof lenses secure to the outside of the lens port.  
Should you elect to use an optional waterproof lens, carefully thread the lens on  
the front of the lens port on the housing. The lens threads are very fine; DO NOT cross  
thread. It should screw on very easily. If it is difficult to turn, you are cross threading.  
On/Off  
for Reverse  
Circuit  
Snap Shot  
Eyeport  
• Touch Pad Controls  
Start/  
Stop  
INTERNAL WIDE-ANGLE LENS OPTION ________________________________________  
Special ports are available for use with the Raynox HD-5050 Pro high definition  
wide-angle lens. optional ports sold separately as dome port #9304 or flat lens port  
MAIN O-RING #0109_________________  
O-rings last several years if properly  
maintained. Control seals should not need to  
be replaced as long as the control shafts are  
kept clean and lightly lubricated.  
not  
#9304.1. Raynox HD-5050 Pro lens not included. Lens  
through Ikelite.  
available for purchase  

Attwood Tsunami 4613 User Manual
Cisco Systems Ultra2SD User Manual
Crestron electronic 3 User Manual
Crown Boiler TWZ175 User Manual
Focal Access 1 4 A3 User Manual
Hitachi DZ BD70A User Manual
Jensen Car Speaker JRX252 User Manual
JVC Car Stereo System KD G343 User Manual
JVC GR AXM77UM User Manual
JVC GR SXM240 User Manual