HORIZON
SERIES
FOR MODELS:
RC-30
RC-40
BIKE USER’S GUIDE
RC-30_RC-40_Rev.1.3.indd
1
7/11/07 1:33:56 PM
INTRODUCTION
CONGRATULATIONS and THANK YOU for your purchase of this Horizon Fitness bike!
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Fitness bike can
help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-brake warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
Horizon Fitness delivers.
TABLE OF CONTENTS
Important Precautions
Assembly
4
5
Before You Begin
13
Bike Operation
14
Conditioning Guidelines
Troubleshooting & Maintenance
Limited Warranty
29
35
39
CONTACT INFORMATION
Back Panel
3
RC-30_RC-40_Rev.1.3.indd 2-3
7/11/07 1:33:57 PM
IMPORTANT PRECAUTIONS
ASSEMBLY
SAVE THESE INSTRUCTIONS
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
Read all instructions before using this bike. When using an electrical product, basic precautions should
always be followed, including the following: Read all instructions before using this bike. It is the responsibility
of the owner to ensure that all users of this bike are adequately informed of all warnings and precautions. If
you have any questions after reading this manual, contact Customer Tech Support at the number listed on
the back panel of this manual.
There are several areas during the assembly process of a bike that special attention must be paid. It is very
important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the
assembly instructions are not followed correctly, the bike could have frame parts that are not tightened and
will seem loose and may cause irritating noises. To prevent damage to the bike, the assembly instructions
must be reviewed and corrective actions should be taken.
To reduce the risk of burns, fire, electrical shock or injury to persons:
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and
consult your physician before continuing.
UNPACKING
• Maintain a comfortable pace.
• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or
dismounting the machine.
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended
that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded in before completely tightening any ONE bolt.
• Do not wear clothes that might catch on any part of the bike.
• Do not insert or drop any object into any opening.
• Unplug bike before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth
only; never use solvents. (See MAINTENANCE)
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium
bike grease is recommended.
• This bike should not be used by persons weighing more than 275 pounds (RC-30) or 300 pounds (RC-40).
Failure to comply will void the warranty.
• This bike is intended for in-home use only. Do not use this bike in any commercial, rental, school or
institutional setting. Failure to comply will void the warranty.
• Do not use bike in any location that is not temperature controlled such as but not limited to: garages,
porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• Use the bike only as described in this manual.
Before proceeding, find your bike’s serial number
located on the front stabilizer tube and enter it in the
space provided below. Also locate the model name
which is located on the front plastics.
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOxES BELOW:
SERIAL NUMBER:
At NO time should pets or children under the age of 12 be closer to the bike than 10 feet.
At NO time should children under the age of 12 use the bike.
Children over the age of 12 should not use the bike without adult supervision.
MODEL NAME:
It is essential that your bike is used only indoors, in a climate controlled room. If your bike has been exposed to
colder temperatures or high moisture climates, it is strongly recommended that the bike is warmed up to room
temperature before first time use. Failure to do so may cause premature electronic failure.
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
4
ꢀ
RC-30_RC-40_Rev.1.3.indd 4-5
7/11/07 1:33:59 PM
ASSEMBLY STEP 1
CONSOLE (RC-40 SHOWN)
BASE FRAME
REAR STABILIZER TUBE
REAR END CAPS
WATER BOTTLE CAGE
CONSOLE MAST
MAST BOOT
REMOTE RESISTANCE TOGGLES
(RC-40 ONLY)
BOLT (A)
SEAT BACK
SEAT FRAME
SPRING WASHER (B)
FLAT WASHER (C)
MAIN FRAME
FRONT STABILIZER TUBE
LOWER HANDLEBAR
SEAT BASE
SEAT GUIDERAIL
FRONT CAP
LEVELER ADJUSTER
LEVELER
CAP
BASE FRAME
PEDALS
FRONT STABILIZER TUBE
SEAT ADJUSTMENT LEVER
END CAP
REAR STABILIZER TUBE
MAIN FRAME
BOLT (A)
SPRING WASHER (B)
WASHER (C)
TOOLS INCLUDED
PARTS INCLUDED
SCREW (D)
FRONT END CAP
c Phillips Screwdriver
c 4mm L Wrench
c 1 Console
c 1 Lower Handlebar
c 1 Console Mast
c 1 Main Frame
c 1 Base Frame
c 1 Front Stabilizer Tube
c 2 Pedals
c 1 Upper Handlebar
c 5 Hardware Bags
c 1 Rear Stabilizer
c 1 Seat Guide Rail
c 4 iPod® Adaptors
c 2 Front End Caps
c 2 Rear End Caps
c 2 Seat Guide Rail Caps
c 2 Leveler Adjusters
c 2 Levelers
A) Open HARDWARE BAG FOR STEP 1.
c 5mm L Wrench
B) Slide REAR END CAPS onto REAR STABILIZER TUBE.
c 5mm T Wrench
C) Attach 2 LEVELERS and LEVELER ADUSTERS (found in the hardware box) to the bottom of the REAR
c 13/15mm Flat Wrench
STABILIZER TUBE and secure tightly.
D) Attach the REAR STABILIZER TUBE to the BASE FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4
c 1 Mast Boot
FLAT WASHERS (C).
c 1 Seat Back
E) Slide FRONT END CAPS into FRONT STABILIZER TUBE with wheels facing forward and attach using 2
SCREWS (D) with provided PHILLIPS SCREWDRIVER.
c 1 Seat Frame
c 1 Water Bottle Holder
c 1 Seat Base
F) Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4
FLAT WASHERS (C).
HARDWARE BAG FOR STEP 1 CONTENTS :
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
SCREW (D)
10 mm
Qty: 2
BOLT (A)
20 mm
Qty: 8
SPRING WASHER (B)
15.4 mm
Qty: 8
WASHER (C)
18 mm
Qty: 8
ꢁ
ꢂ
RC-30_RC-40_Rev.1.3.indd 6-7
7/11/07 1:34:06 PM
ASSEMBLY STEP 2
ASSEMBLY STEP 3
MAIN FRAME
BASE FRAME
LEFT PEDAL
CONNECT WIRES
LEFT CRANK ARM
WASHER (C)
SPRING WASHER (B)
BOLT (A)
RIGHT PEDAL
RIGHT CRANK ARM
A) Open HARDWARE BAG FOR STEP 2.
B) Connect wires from BASE FRAME to MAIN FRAME.
C) Slide MAIN FRAME into BASE FRAME.
Note: There is no hardware bag for this step.
A. Attach the RIGHT PEDAL onto the RIGHT CRANk ARM, tightening it CLOCkWISE with the provided
D) Attach the BASE FRAME to the MAIN FRAME using 5 BOLTS (A), 5 SPRING WASHERS (B) and
13mm/15mm FLAT WRENCH.
5 WASHERS (C).
B. Attach the LEFT PEDAL onto the LEFT CRANk ARM, tightening it COUNTER-CLOCkWISE with the provided
DO NOT PINCH WIRES!
13mm/15mm FLAT WRENCH.
Note: The LEFT CRANk ARM is reverse threaded so it is very important that it is tightened
COUNTER-CLOCkWISE. Tightening it the opposite way can damage the pedal or the crank arm or both.
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (A)
20 mm
Qty: 5
SPRING WASHER (B)
15.4 mm
Qty: 5
WASHER (C)
18 mm
Qty: 5
ꢃ
ꢄ
RC-30_RC-40_Rev.1.3.indd 8-9
7/11/07 1:34:12 PM
ASSEMBLY STEP 4
ASSEMBLY STEP ꢀ
STEP B
STEP D
RECESS
EXPOSED WIRES
LOWER HANDLEBAR
SEAT FRAME SEAT LEVER
COVERED WIRE
BOLTS (E)
SPRING W
SEAT GUIDE RAIL
ASHERS (B)
SEAT BASE
SEAT FRAME
SEAT LEVER CLAMP
PULSE GRIP WIRES
SEAT FRAME WIRES
WIRE CLIP
NOTE: Be sure to keep SEAT LEVER positioned upward as
shown. Orientate SEAT LEVER CLAMP with rounded edge
facing away from SEAT GUIDE RAIL as shown above.
WAVY WASHERS (G)
BOLTS (F)
RC-40 SHOWN
A. Open HARDWARE BAG FOR STEP 4.
A) Open HARDWARE BAG FOR STEP 5.
B) Connect the SEAT FRAME WIRES to the PULSE GRIP WIRES as shown above.
B. Attach the SEAT BASE to the SEAT FRAME using 4 BOLTS (F) and 4 WAVY WASHERS (G).
C. Remove SEAT GUIDE RAIL CAPS, then remove the PRE-ATTACHED BOLTS, SPRING WASHERS and WASHERS
from both ends of the SEAT GUIDE RAIL and lift from BASE FRAME. Note the orientation of the seat guide rail.
C) Press COVERED WIRE into WIRE CLIP just before EXPOSED WIRES as shown above. Tuck EXPOSED WIRES
under RECESS in LOWER HANDLEBAR.
D. Slide the SEAT FRAME through the rear of the SEAT GUIDE RAIL as shown above. Lock SEAT FRAME into place by
pusing down on SEAT LEVER. NOTE: Seat lever will face forward when in locked position.
D) Attach the LOWER HANDLEBAR to the SEAT FRAME using 4 BOLTS (E) and 4 SPRING WASHERS (B).
DO NOT PINCH WIRES!
E. Attach the RUBBER STOPPER to the bottom of the SEAT GUIDE RAIL using 1 SCREW (H).
F. Set assembled SEAT GUIDE RAIL on the grooves of the BASE FRAME.
E) Attach the SEAT BACk to the SEAT FRAME using 4 BOLTS (F) and 4 WAVY WASHERS (G).
G. Re-attach the PRE-ATTACHED BOLTS, SPRING WASHERS and WASHERS through the BASE FRAME into each
end of the SEAT GUIDE RAIL. DO NOT TIGHTEN UNTIL ALL FOUR BOLTS HAVE BEEN STARTED.
H. Snap SEAT GUIDE RAIL CAPS back onto each end of SEAT GUIDE RAIL.
SEAT BACK
SEAT GUIDE RAIL
PRE-ATTACHED WASHERS
PRE-ATTACHED SPRING WASHERS
CAP
PRE-ATTACHED BOLTS
SEAT GUIDE RAIL CAP
WAVY WASHERS (G)
BOLTS (F)
RUBBER STOPPER
SCREW (H)
BASE FRAME
RC-40 SHOWN
HARDWARE BAG FOR STEP 4 CONTENTS :
HARDWARE BAG FOR STEP ꢀ CONTENTS :
BOLT (F)
35 mm
Qty: 4
WAVY WASHER (G)
18 mm
Qty: 4
SCREW (H)
8 mm
Qty: 1
RUBBER STOPPER
Qty: 1
BOLT (E)
15 mm
Qty: 4
WAVY WASHER (G)
18 mm
Qty: 4
SPRING WASHER (B)
15.4 mm
Qty: 4
BOLT (F)
35 mm
Qty: 4
Side View
Side View
10
11
RC-30_RC-40_Rev.1.3.indd 10-11
7/11/07 1:34:28 PM
ASSEMBLY STEP ꢁ
BEFORE YOU BEGIN
A) Open HARDWARE BAG FOR STEP 6.
CONGRATULATIONS! on choosing your bike. You’ve taken an important step in developing and
sustaining an exercise program! Your bike is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your bike can improve the quality of your life in so many ways.
B) Slide the TOP CAP through the MAST as shown.
Tie the CONSOLE WIRES to the pre-attached
routing wire. Carefully pull console wires
through the CONSOLE MAST. Discard wire when
finished.
UPPER HANDLEBAR
SPRING WASHER (B)
BOLT (K)
HERE ARE jUST A FEW OF THE HEALTH BENEFITS OF ExERCISE:
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
TOP CAP
C) Attach the CONSOLE MAST to the MAIN FRAME
using 4 BOLTS (A), 4 SPRING WASHERS (B) and
4 FLAT WASHERS (C) from the sides and
1 SET SCREW (I) from the front.
SET SCREW (I)
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
The key to reaping these benefits is to develop an exercise habit. Your new bike will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your bike in the comfort of your home. This guide provides you with basic information
for using and enjoying your new machine.
CONSOLE MAST
CONSOLE WIRES
D. Carefully tuck the CONSOLE MAST wires into the
CONSOLE MAST before attaching the CONSOLE.
E. Attach the UPPER HANDLEBAR to the CONSOLE
MAST using 2 BOLTS (k) and 2 SPRING
WASHERS (B).
LOCATION OF THE BIKE
Place the bike on a level surface. Do not place the bike in any area that will block any vent or air openings.
The bike should not be located in a garage, covered patio, near water or outdoors.
F. Attach CONSOLE to the CONSOLE MAST using
the 4 PRE-ATTACHED SCREWS (screws will have
to be removed from the console first).
DO NOT PINCH WIRES!
ADJUSTING LEVELERS
Adjust the 2 rear levelers so that the bike is level on the floor. Then adjust the third leveler located
under the BASE FRAME TUBE just so it is snug with the floor.
G. Attach WATER BOTTLE CAGE using
2 SCREWS (L).
Connect AC ADAPTOR to the AC ADAPTOR INPUT,
located at front of the main frame. Connect ADAPTOR
to a power outlet.
ADJUST HEIGHT
LOCK ADJUSTMENT
WATER BOTTLE CAGE
SCREWS (L)
RC-40 SHOWN
HARDWARE BAG FOR STEP ꢁ CONTENTS :
SCREW (L)
10 mm
Qty: 2
BOLT (A)
20 mm
Qty: 4
SPRING WASHER (B)
15.4 mm
Qty: 6
WASHER (C)
18 mm
Qty: 4
SET SCREW (I)
10 mm
Qty: 1
BOLT (K)
15 mm
Qty: 2
YOU’RE FINISHED!
12
13
RC-30_RC-40_Rev.1.3.indd 12-13
7/11/07 1:34:38 PM
RC-30 CONSOLE DISPLAY
BIKE OPERATION
POWER
Your bike is powered by a power supply. The power must be plugged into the power jack, which is located in
the front of the RC-30 / RC-40 near the STABILIZER TUBE. They also have an on/off switch located on the back
of the console.
A
G
Do not operate the bike if the power cord or plug is damaged.
If the bike appears to not be working properly, do not use the bike.
WATTS
C
B
MOVING
TEMPO
Your bike has a pair of transport wheels built into
the FRONT STABILIZER TUBE. To move, first remove
the power supply and firmly grasp the handle on
the rear stabilizer tube, carefully tilt and roll.
E
D
F
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
A) MONITOR DISPLAY: Program Profile, Time, Level, Calories, Heart Rate, Distance, Speed.
B) UP/DOWN ARROW KEYS: Used to adjust program setting values & resistance levels.
C) QUICK RESISTANCE KEYS: Used to select/adjust your resistance settings.
D) ENTER: Used to select your program and program settings.
Our bikes are well built and heavy, weighing up to 200 lbs! Use care and
additional help if necessary when moving.
E) START / PAUSE: Press to start/pause your workout.
ADJUSTING THE SEAT
F) STOP: Press to end your workout. Hold for 3 seconds to reset the bike.
G) ON/OFF SWITCH: Located on back of console.
To adjust the seat turn the handle up into its middle position making the handle feel loose. Then, slide the
seat to a position that puts you in a comfortable pedaling range (one that keeps a slight bend in your knee
while your legs are in the extended position). Lock the mechanism by rotating it down until handle tightens.
NOTE: It is recommended that you do not sit on the seat while adjusting its position.
14
1ꢀ
RC-30_RC-40_Rev.1.3.indd 14-15
7/11/07 1:34:41 PM
RC-30 CONSOLE OPERATION
RC-30 CONSOLE OPERATION
PROGRAM: MANUAL
QUICK START
Allows ‘On The Fly’ manual RESISTANCE changes. Time-based goal.
1) Plug in and turn ON/OFF SWITCH to the “ON” position located on the back of the console.
2) Start Bike by pedaling or pressing any button.
3) Press START button and begin exercising.
4) Program will automatically default to MANUAL (P1), the time will count up from 0:00, and the resistance
will default to level 1.
PROGRAM: INTERVALS
Bike a series of alternating RESISTANCE levels. Time-based goal with 10 difficulty levels to
choose from.
ꢀ) The resistance level can be adjusted during the workout.
WARM-UP
PROGRAM SEGMENTS - REPEAT
COOL-DOWN
SECONDS
60
1
1
1
1
1
1
1
1
1
2
2
60
2
1
1
1
1
2
2
2
2
2
2
60
3
1
1
1
1
3
3
3
3
3
4
60
4
1
2
2
3
3
4
4
5
5
6
30
5
3
4
4
5
5
6
6
7
7
8
60
6
1
1
2
2
3
3
4
4
5
5
60
7
1
1
2
2
3
3
4
4
5
5
30
8
3
4
4
5
5
6
6
7
7
7
30
9
3
4
4
5
5
6
6
7
7
8
60
10
1
30
11
3
60
12
1
60
13
1
30
14
3
30
15
3
60
16
1
60
17
1
60
18
1
60
19
1
60
20
1
SELECTING PROGRAMS
1) Use the ARROW KEYS to scroll through programs.
2) Press ENTER to select a program.
3) Use the ARROW KEYS to set TIME, LEVEL, and WEIGHT.
4) Press ENTER to select each program setting.
ꢀ) Press the START button to begin program.
LEVEL
1
2
1
4
1
1
4
4
1
2
1
1
1
3
2
4
2
2
4
4
2
2
1
1
1
4
2
5
2
2
5
5
2
3
1
1
1
5
3
5
3
3
5
5
3
3
3
2
1
6
3
6
3
3
6
6
3
4
3
2
1
7
4
6
4
4
6
6
4
4
3
2
1
8
4
7
4
4
7
7
4
5
3
2
1
HEART RATE
PULSE GRIPS
9
5
7
5
5
7
7
5
5
3
2
2
10
5
8
5
5
8
8
5
6
4
2
2
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your
heart rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When
gripping the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure.
Keep a loose, cupping hold. You may experience an erratic readout if consistently holding the grip pulse
handlebars. Make sure to clean the pulse sensors to ensure proper contact can be maintained.
Warm up and cool-down last 4:00 minutes each
PROGRAM: ROLLING
Challenges with different combinations of RESISTANCE. Time-based goal with 7 difficulty levels to choose from.
PROGRAM PROFILES
WARM-UP
PROGRAM SEGMENTS
COOL-DOWN
SECONDS
60
1
60
60
60
4
60
5
60
6
60
7
60
8
60
60
10
2
60
11
3
60
12
2
60
13
1
60
14
2
60
15
3
60
16
2
60
17
1
60
18
1
60
19
1
60
20
1
P1: MANUAL
LEVEL
2
3
9
Allows you to adjust the resistance level to your preference, without a preset program.
1
2
3
4
5
6
7
1
1
2
2
1
2
3
2
1
1
2
2
3
2
3
4
3
2
3
4
3
2
3
4
3
2
1
1
1
P2: INTERVALS
2
2
3
3
3
4
5
4
3
4
5
4
3
4
5
4
3
1
1
1
Bike a series of alternating RESISTANCE levels. Time based goal with 10 difficulty levels to choose from.
2
3
3
4
4
5
6
5
4
5
6
5
4
5
6
5
4
1
1
1
P3: ROLLING
3
4
4
4
5
6
7
6
5
6
7
6
5
6
7
6
5
3
2
1
Challenges with different combinations of RESISTANCE. Time-based goal with 7 difficulty levels to choose from.
3
5
4
5
6
7
8
7
6
7
8
7
6
7
8
7
6
3
2
1
P4: WEIGHT LOSS
4
5
5
5
6
7
7
8
8
7
7
6
7
7
8
8
7
3
2
1
Challenges with various combinations of RESISTANCE to keep you in the fat burning zone. Time-based goal
Warm up and cool-down last 4:00 minutes each
with 10 difficulty levels to choose from.
Pꢀ: TEMPO
Program cues you to pedal at high, medium or low speed for an exciting and
challenging workout.
Pꢁ: RANDOM
Provides even more workout variety by mixing up your RESISTANCE levels. Time-based
goal with 7 difficulty levels to choose from.
Pꢂ: CUSTOM 1
Design and store your own custom exercise program.
Pꢃ: CUSTOM 2
Design and store your own custom exercise program.
1ꢁ
1ꢂ
RC-30_RC-40_Rev.1.3.indd 16-17
7/11/07 1:34:44 PM
PROGRAM: RANDOM
PROGRAM: WEIGHT LOSS
Challenges with various combinations of RESISTANCE. Time-based goal with 10 difficulty levels to choose from.
Provides even more workout variety by mixing up your RESISTANCE intervals. Time-based goal with 7 difficulty
levels to choose from.
WARM-UP
PROGRAM SEGMENTS
COOL-DOWN
WARM-UP
PROGRAM SEGMENTS
COOL-DOWN
SECONDS
60
1
1
1
1
1
1
1
1
1
2
2
60
2
1
1
1
1
2
2
2
2
2
2
60
3
1
1
1
1
3
3
3
3
3
4
60
4
1
2
2
3
3
4
4
5
5
6
60
5
1
1
2
2
3
3
4
4
5
5
60
6
1
2
2
3
3
4
4
5
5
6
60
7
1
2
2
3
3
4
4
5
5
6
60
8
2
2
3
3
4
4
5
5
6
6
60
9
2
3
3
4
4
5
5
6
6
7
60
10
3
60
11
3
60
12
2
60
13
2
60
14
1
60
15
1
60
16
1
60
17
1
60
18
1
60
19
1
60
20
1
SECONDS
60
1
60
60
60
4
60
5
60
6
60
7
60
60
60
10
5
60
11
2
60
12
3
60
13
5
60
14
1
60
15
1
60
16
1
60
17
1
60
18
1
LEVEL
LEVEL
2
3
8
9
1
2
1
2
3
4
5
6
7
1
1
2
2
1
3
5
2
4
3
3
3
2
2
2
1
2
1
1
1
1
2
2
3
1
3
6
2
4
6
2
3
6
1
2
1
1
1
3
4
4
3
3
2
2
2
2
1
1
1
2
2
3
3
2
4
6
3
5
6
3
4
6
2
2
1
1
1
4
4
4
4
3
3
3
2
3
1
1
1
2
3
3
4
2
4
7
3
5
7
3
4
7
2
3
1
1
1
5
5
5
4
4
3
3
3
3
3
2
1
3
4
4
4
2
4
7
3
5
7
3
4
7
2
3
3
2
1
6
5
5
5
4
4
4
3
4
3
2
1
3
5
4
5
3
5
8
4
6
8
4
5
8
3
4
3
2
1
7
6
6
5
5
4
4
4
4
3
2
1
4
5
5
5
4
6
8
4
7
8
4
6
8
4
4
3
2
1
8
6
6
6
5
5
5
4
5
3
2
1
Warm up and cool-down last 4:00 minutes each
9
7
7
6
6
5
5
5
5
3
2
2
10
7
7
7
6
6
6
5
6
4
2
2
SELECTING CUSTOM PROGRAMS
Warm up and cool-down last 4:00 minutes each
1) To select CUSTOM PROGRAM press up/down arrow keys and press ENTER.
2) Set TIME using the up/down arrow keys and press ENTER.
PROGRAM: TEMPO
Program cues you to pedal at high, medium or low speed for an exciting and challenging workout. Time-based
goal with 6 difficulty levels to choose from.
• IF THE PROGRAM IS PREVIOUSLY STORED – After you set the time and press START, the previously
stored program will begin.
3) Set weight using the up/down arrow keys and press ENTER. Default weight begins at 150 lbs.
4) Set the RESISTANCE PROFILES using the up/down arrow keys and press ENTER after each RESISTANCE
PROFILE is set to the desired level (repeat until all 15 segments are chosen).
*NOTE: If STOP is pressed it will take you back to previous segment.
SECONDS 60
60
60
60
90
L
45
M
90
L
30
H
45
M
90
L
30
H
45
M
90
L
30
H
45
M
90
L
60
60
60
60
WARM-UP
COOL-DOWN
Level
1
1
1
1
1
1
1
2
1
1
1
1
2
2
3
1
1
1
1
3
3
4
2
2
2
3
3
4
5
3
4
5
6
7
8
6
2
3
4
5
6
7
7
3
4
5
6
7
8
8
1
2
3
4
5
6
9
2
3
4
5
6
7
10
3
11
1
12
2
13
3
14
1
15
2
16
3
17
2
18
1
19
1
20
1
1
2
3
4
5
6
ꢀ) Press START or ENTER to begin the program.
4
2
3
4
2
3
4
2
1
1
1
5
3
4
5
3
4
5
2
1
1
1
*NOTE: To reset the memory press and hold the ENTER button for 5 seconds.
6
4
5
6
4
5
6
3
1
1
1
7
5
6
7
5
6
7
3
3
2
1
8
6
7
8
6
7
8
4
3
2
1
Warm up and cool-down last 4:00 minutes each
1ꢃ
1ꢄ
RC-30_RC-40_Rev.1.3.indd 18-19
7/11/07 1:34:47 PM
RC-40 CONSOLE DISPLAY
RC-40 CONSOLE OPERATION
QUICK START
K
A
K
1) Plug in and turn ON/OFF SWITCH to the “ON” position located on the back of the console.
2) Start Bike by pedaling or pressing any button.
3) Press START button and begin exercising.
4) Program will automatically default to MANUAL (P1), the time will count up from 0:00, and the resistance
will default to level 1.
ꢀ) The resistance level can be adjusted during the workout.
CALORIES
I N S T R U C T I O N S
To Adjust PROGRAM SETTINGS
Use: UP and DOWN Arrow Keys.
To Advance press ENTER.
2
3
To Select PROGRAM
1
Use: UP and DOWN Arrow Keys.
To Advance press ENTER.
L
Press START to begin program.
H
F
G
SET
LEVEL
INCLINE
PACE
WATTS
SPEED
SELECTING PROGRAMS
L
E
V
E
L
1
2
3
4
5
6
7
8
9
10
E
1) Use the ARROW KEYS to scroll through programs.
2) Press ENTER to select a program.
S
E
L
E
C
T
/
A
D
J
U
S
T
P
R
O
G
R
A
M
S TA RT
PA U S E
ENTER
CHANGE DISPLAY
S T O P
B
H
O
L
D
T
O
R
E
S
E
T
C
3) Use the ARROW KEYS to set TIME, LEVEL, and WEIGHT.
4) Press ENTER to select each program setting.
ꢀ) Press the START button to begin program.
D
I
J
HEART RATE
PULSE GRIPS
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Keep a loose,
cupping hold. You may experience an erratic readout if consistently holding the grip pulse handlebars. Make sure
to clean the pulse sensors to ensure proper contact can be maintained.
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
A) MONITOR DISPLAY: Time, Level, Heart Rate, Distance, Calories, Speed, Program Profiles.
B) START/PAUSE: Press to start/pause your workout.
PROGRAM PROFILES
C) STOP: Press to end/pause your workout. (Hold for 3 seconds to reset the bike).
D) ENTER: Used to set your program and change program / display settings.
E) UP/DOWN ARROW KEYS: Used to select / adjust your program and program settings.
F) RESISTANCE KEYS: Used to reach desired resistance more quickly.
P1: MANUAL
Allows you to adjust the resistance level to your preference, without a preset program.
P2: INTERVALS 1
Improves your strength, speed and endurance by raising and lowering the resistance levels throughout your
workout to involve your heart and other muscles.
G) FAN BUTTON: Used to adjust fan to 3 speed levels.
H) AUDIO IN: Plug your personal music player into the console using the included adaptor wire.
I) READING RACK/MUSIC PLAYER HOLDER: Holds reading material or music player.
J) FAN: Personal workout fan.
P3: INTERVALS 2
Improves your strength, speed and endurance by raising and lowering the resistance levels throughout
your workout to involve your heart and other muscles. Interval segments vary from Intervals 1 for workout
variation.
K) SPEAKERS: Music plays through speakers when your personal music player is connected to console.
L) ON/OFF SWITCH: Located on back of console.
P4: ROLLING 1
Creates the feeling of moving up and down hills by gradually increasing and decreasing the resistance.
Pꢀ: ROLLING 2
Creates the feeling of moving up and down hills by gradually increasing and decreasing the resistance.
Longer intensity levels than Rolling 1.
20
21
RC-30_RC-40_Rev.1.3.indd 20-21
7/11/07 1:34:48 PM
Pꢁ: WEIGHT LOSS
PROGRAM: MANUAL
Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat burning zone.
Allows ‘On The Fly’ manual RESISTANCE changes. Time-based goal.
Pꢂ: WEIGHT LOSS PLUS
Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat burning
zone. Greater intensity levels than Weight Loss.
PROGRAM: INTERVALS 1 & 2
Bike a series of alternating RESISTANCE levels. Time-based goals with 10 difficulty levels to
Pꢃ: TEMPO 1
Program cues you to pedal at high, medium and low speeds for an exciting and challenging workout.
choose from.
Pꢄ: TEMPO 2
Program cues you to pedal at high, medium and low speeds for an exciting and challenging workout. Longer
intensity levels than TEMPO 1.
INTERVALS 1
SECONDS
4 MINUTES
30 90 90 30 30 90 30 90 90 30 30 90 60 60 60 60
LEVEL
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
2
2
2
2
2
2
3
1
1
1
1
3
3
3
3
3
4
4
1
2
2
3
3
4
4
5
5
6
5
3
3
4
4
5
5
6
6
7
7
6
1
1
2
2
3
3
4
4
5
5
7
1
1
2
2
3
3
4
4
5
5
8
3
3
4
4
5
5
6
6
7
7
9
3
3
4
4
5
5
6
6
7
7
10 11 12 13 14 15 16 17 18 19 20
P10: RANDOM 1
1
2
1
1
2
2
3
3
4
4
5
5
3
3
4
4
5
5
6
6
7
7
1
1
2
2
3
3
4
4
5
5
1
1
2
2
3
3
4
4
5
5
3
3
4
4
5
5
6
6
7
7
3
3
4
4
5
5
6
6
7
7
1
1
2
2
3
3
4
4
5
5
1
2
2
3
3
4
4
5
5
6
1
1
1
1
3
3
3
3
3
4
1
1
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
Provides even more work out variety by mixing up your resistance levels.
P11: RANDOM 2
3
Provides even more work out variety by mixing up your resistance levels. Greater intensity levels than
Random 1.
4
5
6
P12: THR ZONE
7
Automatically adjusts the resistance level to keep your heart rate in your desired range.
8
ꢁ0% OF MAx HEART RATE: Used for beginners and longer workouts. Lower intensity and longer
duration helps burn fat more efficiently.
9
10
WARM UP AND COOL DOWN LAST 4 MINUTES EACH.
ꢁꢀ% OF MAx HEART RATE: Used for beginner to intermediate users and mid to long range workouts.
Lower intensity and longer duration helps burn fat more efficiently.
INTERVALS 2
ꢂ0% OF MAx HEART RATE: For intermediate users and mid range cardio workouts.
While this range burns fat it really challenges the cardiovascular system and helps strengthen
the heart.
SECONDS
4 MINUTES
30 ꢁ0 ꢁ0 30 30 ꢁ0 30 ꢁ0 ꢁ0 30 30 ꢁ0 60 60 60 60
LEVEL
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
2
2
2
2
2
2
3
1
1
1
1
3
3
3
3
3
4
4
1
2
2
3
3
4
4
5
5
6
5
3
3
4
4
5
5
6
6
7
7
6
1
1
2
2
3
3
4
4
5
5
7
1
1
2
2
3
3
4
4
5
5
8
3
3
4
4
5
5
6
6
7
7
9
3
3
4
4
5
5
6
6
7
7
10 11 12 13 14 15 16 17 18 19 20
1
2
1
1
2
2
3
3
4
4
5
5
3
3
4
4
5
5
6
6
7
7
1
1
2
2
3
3
4
4
5
5
1
1
2
2
3
3
4
4
5
5
3
3
4
4
5
5
6
6
7
7
3
3
4
4
5
5
6
6
7
7
1
1
2
2
3
3
4
4
5
5
1
2
2
3
3
4
4
5
5
6
1
1
1
1
3
3
3
3
3
4
1
1
1
1
2
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
ꢂꢀ% OF MAx HEART RATE: For advanced users and short to mid range cardio workouts. Burns fat,
tones muscles and challenges the heart.
3
4
ꢃ0% OF MAx HEART RATE: For advanced users and short workouts. Burns fat, strengthens and tones
muscles, and challenges the entire cardiovascular system.
5
6
7
P13: CUSTOM 1
8
Design and store your own custom exercise program.
9
P14: CUSTOM 2
10
Design and store your own custom exercise program.
WARM UP AND COOL DOWN LAST 4 MINUTES EACH.
22
23
RC-30_RC-40_Rev.1.3.indd 22-23
7/11/07 1:34:50 PM
PROGRAM: ROLLING 1 & 2
PROGRAM: WEIGHT LOSS
Challenges with various combinations of hills and valleys RESISTANCE. Time-based goal with 10 difficulty
levels to choose from.
Motivates with different combinations of RESISTANCE. Time-based goal with 8 or 7 difficulty levels to
choose from.
WEIGHT LOSS PLUS
ROLLING 1
PROGRAM SEGMENTS - Do not repeat
WARM-UP
PROGRAM SEGMENTS
COOL-DOWN
WARM-UP
COOL-DOWN
SECONDS
60
1
1
1
1
1
1
1
1
1
2
2
60
2
1
1
1
1
2
2
2
2
2
2
60
3
1
1
1
1
3
3
3
3
3
4
60
4
1
2
2
3
3
4
4
5
5
6
60
5
1
1
2
2
3
3
4
4
5
5
60
6
1
2
2
3
3
4
4
5
5
6
60
7
1
2
2
3
3
4
4
5
5
6
60
8
2
2
3
3
4
4
5
5
6
6
60
9
2
3
3
4
4
5
5
6
6
7
60
10
3
60
11
3
60
12
2
60
13
2
60
14
1
60
15
1
60
16
1
60
17
1
60
18
1
60
19
1
60
20
1
LEVEL
1
1
1
2
2
3
3
4
4
2
1
2
2
3
4
5
5
5
3
2
2
3
3
4
4
5
5
4
2
3
3
4
4
5
5
5
5
1
2
3
4
5
6
7
8
6
2
3
4
5
6
7
8
8
7
3
4
5
6
7
8
8
9
8
4
5
6
7
8
9
8
9
9
3
10
2
11
4
12
3
13
2
14
1
15
2
16
2
17
1
18
1
LEVEL
1
2
3
4
5
6
7
8
1
2
3
3
3
2
2
2
1
2
1
1
1
4
3
5
4
3
2
3
2
2
1
3
4
4
3
3
2
2
2
2
1
1
1
7
8
6
5
4
3
3
3
2
2
4
4
4
4
3
3
3
2
3
1
1
1
8
9
7
6
5
4
4
3
3
2
5
5
5
4
4
3
3
3
3
3
2
1
9
10
10
9
8
7
6
5
4
4
4
3
6
5
5
5
4
4
4
3
4
3
2
1
10
9
9
8
7
6
5
4
5
3
7
6
6
5
5
4
4
4
4
3
2
1
8
8
8
7
5
5
5
4
8
6
6
6
5
5
5
4
5
3
2
1
9
7
7
6
6
5
5
5
5
3
2
2
10
10
9
9
8
8
5
5
5
4
10
7
7
7
6
6
6
5
6
4
2
2
Warm up and cool-down last 4:00 minutes each
ROLLING 2
WARM-UP
PROGRAM SEGMENTS - Repeat
COOL-DOWN
PROGRAM: WEIGHT LOSS PLUS
SECONDS 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 60 60 60 60
Challenges with various combinations of hills and valleys RESISTANCE. Time-based goal with 5 difficulty
levels to choose from.
LEVEL
1
1
1
2
2
3
3
4
2
1
1
2
2
3
3
4
3
1
1
2
2
3
3
4
4
2
3
3
4
4
5
5
5
1
2
3
4
5
6
7
6
2
3
4
5
6
7
8
7
3
4
5
6
7
8
9
8
4
9
1
2
3
4
5
6
7
10 11 12 13 14 15 16 17 18 19 20
1
2
3
4
5
6
7
2
3
4
5
6
7
8
3
4
5
6
7
8
9
4
5
1
2
3
4
5
6
7
2
3
4
5
6
7
8
3
4
5
6
7
8
9
4
5
2
3
3
4
4
5
5
1
1
2
2
3
3
4
1
1
2
2
3
3
4
1
1
2
2
3
3
4
5
WEIGHT LOSS PLUS
6
6
6
WARM-UP
PROGRAM SEGMENTS - Repeat
COOL-DOWN
7
7
7
SECONDS
60
1
60
60
60
4
60
5
60
6
60
7
60
60
60
10
3
60
11
4
60
12
6
60
13
6
60
14
5
60
15
4
60
16
3
60
17
2
60
18
2
60
19
1
60
20
1
8
8
8
LEVEL
2
3
8
9
1
2
3
4
5
1
1
2
2
4
3
4
5
5
9
9
9
1
1
2
2
5
4
5
6
6
4
5
7
7
6
5
4
2
2
1
1
10
10
10
1
1
2
2
6
5
6
7
7
5
6
8
8
7
6
5
2
2
1
1
WARM-UP and COOL-DOWN last 4:00 minutes each.
2
2
3
3
7
6
7
8
8
6
7
9
9
8
7
6
3
3
2
2
2
2
3
3
8
7
8
9
9
7
8
10
10
9
8
7
3
3
2
2
Warm up and cool-down last 4:00 minutes each
24
2ꢀ
RC-30_RC-40_Rev.1.3.indd 24-25
7/11/07 1:34:53 PM
PROGRAM: TEMPO 1 & 2
PROGRAM: RANDOM 1 & 2
Provides even more workout variety by mixing up your resistance intervals (RESISTANCE levels). Time-based
goal with 7 or 4 difficulty levels to choose from.
Program cues you to pedal at high, medium or low speed for an exciting and challenging
workout (RESISTANCE levels). Time-based goal with 8 difficulty levels to choose from.
RANDOM 1
TEMPO 1
WARM-UP
PROGRAM SEGMENTS - Repeat
COOL-DOWN
SECONDS 60
60
60
60
90
L
45
M
90
L
30
H
45
90
30
H
45
M
90
L
30
H
45
M
90
L
60
60
60
60
SECONDS
60
1
60
60
60
4
60
5
60
6
60
7
60
60
60
10
5
60
11
2
60
12
3
60
13
5
60
14
1
60
15
1
60
16
1
60
17
1
60
18
1
WARM-UP
M
L
COOL-DOWN
LEVEL
2
3
8
9
Level
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
2
2
3
1
1
1
1
3
3
3
3
4
2
2
2
3
3
4
4
5
5
3
6
2
3
4
5
6
7
8
9
7
3
8
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
3
11
1
12
2
13
3
14
1
15
2
16
3
17
2
18
1
19
1
20
1
1
2
3
4
5
6
7
1
1
2
2
1
3
5
2
4
1
2
3
4
5
6
7
8
1
2
2
3
1
3
6
2
4
6
2
3
6
1
2
1
1
1
4
4
4
2
3
4
2
3
4
2
1
1
1
2
2
3
3
2
4
6
3
5
6
3
4
6
2
2
1
1
1
5
5
5
3
4
5
3
4
5
2
1
1
1
2
3
3
4
2
4
7
3
5
7
3
4
7
2
3
1
1
1
6
6
6
4
5
6
4
5
6
3
1
1
1
3
4
4
4
2
4
7
3
5
7
3
4
7
2
3
3
2
1
7
7
7
5
6
7
5
6
7
3
3
2
1
3
5
4
5
3
5
8
4
6
8
4
5
8
3
4
3
2
1
8
8
8
6
7
8
6
7
8
4
3
2
1
4
5
5
5
4
6
8
4
7
8
4
6
8
4
4
3
2
1
9
9
9
7
8
9
7
8
9
4
3
2
1
10
10
10
8
9
10
8
9
10
5
3
2
1
WARM-UP and COOL-DOWN last 4:00 minutes each.
Warm up and cool-down last 4:00 minutes each
RANDOM 2
WARM-UP
PROGRAM SEGMENTS - Repeat
COOL-DOWN
TEMPO 2
SECONDS
60
1
60
60
60
4
60
5
60
6
60
7
60
60
60
10
7
60
11
4
60
12
1
60
13
6
60
14
3
60
15
1
60
16
1
60
17
1
60
18
1
SECONDS 60
60
60
60
30
L
60
M
90
L
30
H
60
90
30
H
60
M
90
L
30
H
60
M
90
L
60
60
60
60
LEVEL
2
3
8
9
WARM-UP
M
L
COOL-DOWN
1
2
3
4
1
1
2
2
1
4
3
5
2
Level
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
2
2
2
3
1
1
1
1
3
3
3
3
4
2
2
2
3
3
4
4
5
5
3
6
2
3
4
5
6
7
8
9
7
3
8
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
3
11
1
12
2
13
3
14
1
15
2
16
3
17
2
18
1
19
1
20
1
1
2
2
3
2
5
4
6
3
8
5
2
7
4
2
1
1
1
1
2
3
4
5
6
7
8
2
2
3
3
3
6
5
7
4
9
6
3
8
5
2
1
1
1
4
4
4
2
3
4
2
3
4
2
1
1
1
2
3
3
4
4
7
6
8
5
10
7
4
9
6
3
1
1
1
5
5
5
3
4
5
3
4
5
2
1
1
1
WARM-UP and COOL-DOWN last 4:00 minutes each.
6
6
6
4
5
6
4
5
6
3
1
1
1
7
7
7
5
6
7
5
6
7
3
3
2
1
8
8
8
6
7
8
6
7
8
4
3
2
1
9
9
9
7
8
9
7
8
9
4
3
2
1
10
10
10
8
9
10
8
9
10
5
3
2
1
Warm up and cool-down last 4:00 minutes each
2ꢁ
2ꢂ
RC-30_RC-40_Rev.1.3.indd 26-27
7/11/07 1:34:55 PM
SELECTING A THR ZONE PROGRAM
CONDITIONING GUIDELINES
1) Select THR ZONE using the UP/DOWN ARROW KEYS and press ENTER.
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.
2) Set WEIGHT using ARROW KEYS and press ENTER.
3) Set TARGET HR.
HOW OFTEN? (Frequency of Workouts)
The HEART RATE window will flash showing the default target heart rate of 80 beats per minute. Select
your target heart rate (from the chart on page 30) using the UP / DOWN KEYS and press ENTER.
*NOTE: Target heart rate is selected in multiples of 5 beats.
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
4) Set TIME using ARROW KEYS and press ENTER.
ꢀ) Press the ENTER or START key to start workout.
NOTES:
1) There is a 4-minute warm-up built into this program at level 1 resistance.
2) After 4 minutes the resistance will automatically adjust to bring your heart rate within 5 beats of the
target number you selected at the beginning of the program.
3) If there is no Heart Rate detected, the unit will not change resistance levels up or down.
4) If your Heart Rate is 25 beats over your Target Zone the program will shut down.
HOW LONG? (Duration of Workouts)
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may
be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.
SELECTING CUSTOM PROGRAMS
HOW HARD? (Intensity of Workouts)
How hard you workout is also determined by your goals. If you use your machine to prepare for a 5K workout,
you will probably work out at a higher intensity than if your goal is general fitness. Regardless of your long
term goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to
be beneficial! There are two ways to measure your exercise intensity. The first is by monitoring your heart rate
(using the grip pulse handlebars or a wireless chest transmitter - may be sold separately), and the second is by
evaluating your perceived exertion level (this is simpler than it sounds!).
1) Select CUSTOM PROGRAM using the ARROW KEYS and press ENTER.
2) Set TIME using the ARROW KEYS and press ENTER.
• IF THE PROGRAM IS PREVIOUSLY STORED – After you set the time and press START/STOP the previously
stored program will begin.
3) Set WEIGHT using the ARROW KEYS and press ENTER
4) After WEIGHT is set press ENTER to save the program and USER’S WEIGHT into memory.
ꢀ) Set the RESISTANCE PROFILES using the ARROW KEYS and press ENTER after each RESISTANCE PROFILE
is set to the desired level (repeat until all 15 segments are chosen).
*NOTE: If START is pressed it will take you back to previous segment.
ꢁ) Press START or ENTER to begin the program.
PERCEIVED ExERTION LEVEL
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
*NOTE: To reset the memory press and hold the ENTER button for 5 seconds.
2ꢃ
2ꢄ
RC-30_RC-40_Rev.1.3.indd 28-29
7/11/07 1:34:56 PM
TARGET HEART RATE ZONE CHART
STRETCHING
TIPS
What is Target Heart Rate Zone?
STRETCH FIRST
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
Before using your product, it is best to take a few minutes to do a few gentle stretching exercises. Stretching
prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these
stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing
1
0
0
%
these stretches.
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
7
6
5
%
%
1
1
5
0
0
1
4
6
1
4
3
1
0
1. STANDING CALF MUSCLE STRETCH
3
T
9
1
A
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
3
2
5
R
1
1
3
1
1
5
7
G
1
1
2
1
E
8
4
1
T
1
2
1
4
1
1
1
2
Z
0
0
8
O
1
1
1
0
6
N
1
0
2
E
9
9
9
7
9
3
2. STANDING QUADRICEP STRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
20 25 30 35 40 45 50 55 60 65
AGE
ExAMPLE:
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Hear Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.
30
31
RC-30_RC-40_Rev.1.3.indd 30-31
7/11/07 1:34:57 PM
WEEKLY LOG SHEETS
TIPS
THE IMPORTANCE OF A WARM-UP & COOL DOWN
WARM UP
WEEK #
DAY
SUNDAY
WEEKLY GOAL
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
DATE
DISTANCE CALORIES
TIME
COMMENTS
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
COOL DOWN
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
SATURDAY
WEEKLY TOTALS :
ACHIEVING YOUR FITNESS GOALS
TIPS
WEEK #
WEEKLY GOAL
DAY
DATE
DISTANCE CALORIES
TIME
COMMENTS
An important step in developing a long-term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
SATURDAY
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
WEEKLY TOTALS :
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short-term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories or Time.
WEEK #
DAY
SUNDAY
WEEKLY GOAL
DATE
DISTANCE CALORIES
TIME
COMMENTS
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
WEEKLY TOTALS :
32
33
RC-30_RC-40_Rev.1.3.indd 32-33
7/11/07 1:34:58 PM
TROUBLESHOOTING
MONTHLY LOG SHEETS
Your Horizon Fitness bike is designed to be reliable. However, if you do experience problems with your bike,
please reference the troubleshooting guide listed below.
WEEK #
WEEKLY GOAL
PROBLEM: The console does not turn on.
SOLUTION: Verify the following:
DAY
SUNDAY
DATE
DISTANCE CALORIES
TIME
COMMENTS
• The outlet the machine is plugged into is functional. Double check that the house breaker has not tripped.
• The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.
• The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position (may not apply to all models).
• Turn off the machine and unplug power cord. Remove the console and check that all connections to the console
are secure and not damaged or pinched.
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
PROBLEM: The console turns on but the Time/RPM’s do not count.
WEEKLY TOTALS :
SOLUTION: Verify the following:
• Turn off machine and unplug power cord. Remove the console and check that all connections to the console are
secure and not damaged or pinched.
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or
damaged.
WEEK #
WEEKLY GOAL
DAY
SUNDAY
DATE
DISTANCE CALORIES
TIME
COMMENTS
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION: Verify the following:
MONDAY
• The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.
• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
PROBLEM: The bike makes a squeaking or chirping noise.
SOLUTION: Verify the following:
SATURDAY
• The bike is on a level surface.
• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.
WEEKLY TOTALS :
WEEK #
WEEKLY GOAL
DAY
DATE
DISTANCE CALORIES
TIME
COMMENTS
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
WEEKLY TOTALS :
34
3ꢀ
RC-30_RC-40_Rev.1.3.indd 34-35
7/11/07 1:34:58 PM
HEART RATE TROUBLESHOOTING
COMMON PRODUCT QUESTIONS
PROBLEM: There is no heart rate reading.
SOLUTION: Remove the console and verify that the heart rate cables are attached properly, making
sure that the cables are securely inserted into the console.
ARE THE SOUNDS MY BIKE MAKES NORMAL?
Our bikes are some of the quietest available because they use belt drives and friction free magnetic
resistance. We use the highest grade bearings and belts to minimize noise. However, because the resistance
system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder
technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our bikes. These
mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer of
significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts will
generate some noise which will transmit through the casing and frame. It is also normal for these sounds
to change slightly during a workout and over time because of thermal expansion of the parts.
Check your exercise environment for sources of interference such as high power lines, large motors, etc.
YOU MAY ExPERIENCE AN ERRATIC HEART RATE READOUT UNDER THE FOLLOWING CONDITIONS:
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the
heart rate handlebars.
• Constant movement and vibration due to constantly holding the heart rate grips while exercising.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
WHY IS THE BIKE I HAD DELIVERED LOUDER THAN THE ONE AT THE STORE?
All fitness products seem quieter in a large store showroom because there is generally more background
noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood
overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness
product is placed close to a wall, there will be more reflected noise.
• When your hands are dry or cold. Try moistening your palms or rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palms is especially thick.
• Low light environments can also affect proper readings.
HOW LONG WILL THE DRIVE BELT LAST?
NOTE: Outside interference sources such as computers, motors and fluorescent lights may cause the heart rate
The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are
now commonly used in far more demanding applications such as motorcycle drives.
reading to be erratic.
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
CAN I MOVE THE BIKE EASILY ONCE IT IS ASSEMBLED?
Your bike has a pair of transport wheels built into the front stabilizer. It is easy to move your bike by rolling
it on the front transport wheels. It is important that you place your bike in a comfortable and inviting
room. Your bike is designed to use minimal floor space. Many people will place their bikes facing the TV or
a picture window. If at all possible, avoid putting your bike in a unfinished basement. To make exercise a
desirable daily activity for you, the bike should be in a comfortable setting.
CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
WHEN YOU ARE NEAR THE EQUIPMENT
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer Tech Support to service your bike, they may need to ask detailed questions about the
symptoms that are occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front, back or inside? What kind of noise is it (thumping,
grinding, squeaking, chirping etc.)?
• If you are having a resistance problem what is occurring? Is the resistance always too hard or too easy?
Does the resistance respond when pushing the buttons on the console? Does the resistance constantly cycle
through the levels during the workout?
• Has the machine been maintained per the maintenance schedule?
• Does the problem occur when using the handlebars? Without using the handlebars?
Answering these and other questions will give the technicians the ability to send proper replacement parts and
the service necessary to get you and your Horizon Fitness bike running again!
3ꢁ
3ꢂ
RC-30_RC-40_Rev.1.3.indd 36-37
7/11/07 1:34:59 PM
MAINTENANCE
LIMITED HOME-USE WARRANTY
ExCLUSIONS AND LIMITATIONS
RC-30 WEIGHT CAPACITY = 2ꢂꢀ lbs
RC-40 WEIGHT CAPACITY = 300 lbs
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
Who is covered:
• The original owner and is not transferable.
We use sealed bearings throughout our bikes so lubrication is not needed. The most important maintenance
step is to simply wipe your perspiration off the trainer after each use.
FRAME • LIFETIME
Horizon Fitness warrants the frame against
defects in workmanship and materials for the
lifetime of the original owner.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or defective
part and is the sole remedy of the warranty.
HOW DO I CLEAN MY BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
BRAKE
RC-30 • 20 YEAR
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or installation of
parts or accessories not originally intended or compatible with the equipment
as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of paint
or plastic, neglect, theft, vandalism, fire, flood, wind, lightning, freezing, or
other natural disasters of any kind, power reduction, fluctuation or failure from
whatever cause, unusual atmospheric conditions, collision, introduction of
foreign objects into the covered unit, or modifications that are unauthorized or
not recommended by Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not responsible or
liable for indirect, special or consequential damages, economic loss, loss of
property, or profits, loss of enjoyment or use, or other consequential damages of
whatsoever nature in connection with the purchase, use, repair or maintenance
of the product.
RC-40 • Lifetime
Cleanliness of your bike and its operating environment will keep maintenance problems and service
calls to a minimum. For this reason, Horizon Fitness recommends that the following preventive
maintenance schedule be followed.
Horizon Fitness warrants the brake against
defects in workmanship and materials for a
period of 20 years (RC-30) or the lifetime (RC-
40) of the original owner.
AFTER EACH USE (DAILY)
ELECTRONICS & PARTS • 1 YEAR
Turn off the bike by unplugging the power cord from the wall outlet
• Wipe down the bike with a damp cloth. Never use solvents, as they can cause damage to the
bike.
Horizon Fitness warrants the electronic
components and all original parts for a
period of 1 year from the date of original
purchase, so long as the device remains in
the possession of the original owner.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the bike or in any other area where it can become
pinched or cut.
LABOR • 1 YEAR
• Equipment used for commercial purposes or any use other than a single family
or Household, unless endorsed by Horizon Fitness for coverage.
• Equipment owner or operated outside the US and Canada.
Horizon Fitness shall cover the labor cost for
the repair of the device for a period of 1 year
from the date of the original purchase, so long
as the device remains in the possession of the
original owner.
To remove power from the bike, the power cord must be disconnected from the
wall outlet.
• Delivery, assembly, installation, setup for original or replacement units or labor
or other costs associated with removal or replacement of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Horizon Fitness is
not responsible or liable for any damage, loss or liability arising from any personal
injury incurred during the course of, or as a result of any repair or attempted
repair of your fitness equipment by other than an authorized service technician.
All repairs attempted by you on your fitness equipment are undertaken AT YOUR
OWN RISK and Horizon Fitness shall have no liability for any injury to the person
or property arising from such repairs.
WEEKLY
Clean underneath the bike, following these steps:
• Turn off the bike
• Move the bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
bike.
SERVICE/RETURNS
• Return the bike to its previous position.
• In-home service is available only within 150 miles of the nearest authorized
repair center.
• All returns must be pre-authorized by Horizon Fitness.
• Horizon Fitness’ obligation under this warranty is limited to replacing or
repairing, at Horizon Fitness’ option, the product at one of its authorized service
centers.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the pedals.
• A Horizon Fitness authorized service center must receive all products for which
a warranty claim is made. These products must be received with all freight
and other transportation charges prepaid, accompanied by sufficient proof of
purchase.
• Parts and electronic components reconditioned to As New Condition by Horizon
Fitness or its vendors may sometimes be supplied as warranty replacement parts
and constitute fulfillment of warranty terms.
• This warranty gives you specific legal rights, and your rights may vary from
state to state.
3ꢃ
3ꢄ
RC-30_RC-40_Rev.1.3.indd 38-39
7/11/07 1:34:59 PM
|