Horizon Fitness E900 User Manual

HORIZON  
PERFORMANCE  
FOR MODELS :  
E900  
E1200  
ELLIPTICAL USER’S GUIDE  
E900_E1200_Rev.2.7.indd  
1
6/16/08 9:45:26 AM  
INTRODUCTION  
CONGRATULATIONS and THANK YOU for your purchase of this Horizon Performance elliptical!  
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Performance  
elliptical can help you attain it – adding club-quality performance to your at-home workouts, with  
the ergonomics and innovative features you need to get stronger and healthier, faster. Because  
we're committed to designing fitness equipment from the inside out, we use only the highest quality  
components. It's a commitment we back with one of the strongest frame-to-brake warranty packages  
in the industry.  
You want exercise equipment that offers the most comfort, the best reliability and the highest quality  
in its class.  
Horizon Performance Ellipticals deliver.  
TABLE OF CONTENTS  
Important Precautions  
Assembly  
4
6
Before You Begin  
18  
Elliptical Operation  
Conditioning Guidelines  
Troubleshooting & Maintenance  
Limited Warranty  
19  
34  
42  
46  
CONTACT INFORMATION  
Back Panel  
E900_E1200_Rev.2.7.indd 2-3  
6/16/08 9:45:26 AM  
IMPORTANT PRECAUTIONS  
SAVE THESE INSTRUCTIONS  
Read all instructions before using this elliptical. When using an electrical product, basic precautions  
should always be followed, including the following: Read all instructions before using this elliptical. It is the  
responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings  
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at  
the number listed on the back panel of this manual.  
Connect this exercise product to a properly grounded outlet only. See grounding  
instructions.  
WARNING  
GROUNDING INSTRUCTIONS  
To reduce the risk of burns, fire, electrical shock or injury to persons:  
WARNING  
This product must be grounded. If a elliptical should malfunction or breakdown, grounding provides a path  
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with  
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an  
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.  
• If you experience any kind of pain, including, but not limited to chest pains, nausea, dizziness, or  
shortness of breath, stop exercising immediately and consult your physician before continuing.  
• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.  
• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or  
dismounting the machine.  
• Do not wear clothes that might catch on any part of the elliptical.  
• Do not turn pedal arms by hand.  
Improper connection of the equipment-grounding conductor can result in a risk of  
electric shock. Check with a qualified electrician or serviceman if you are in doubt  
WARNING  
as to whether the product is properly grounded. Do not modify the plug provided  
with the product. If it will not fit the outlet, have a proper outlet installed by a  
qualified electrician.  
• Make sure handlebars are secure before each use.  
• Do not insert or drop any object into any opening.  
• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp  
cloth only; never use solvents. (See MAINTENANCE)  
• This elliptical should not be used by persons weighing more than 300 pounds. Failure to comply will void  
the warranty.  
• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school  
or institutional setting. Failure to comply will void the warranty.  
• Do not use elliptical in any location that is not temperature controlled, such as but not limited to garages,  
porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.  
• Use the elliptical only as described in this manual.  
This product is for use on a nominal 110-volt circuit  
3-Pole Grounded Outlet  
and has a grounding plug that looks like the illustration  
to the right. This product must be used on a dedicated  
circuit. To determine if you are on a dedicated circuit,  
shut off the power to that circuit and observe if any other  
devices lose power. If so, move devices to a different  
circuit. Note: There are usually multiple outlets on one  
GROUNDED  
ELLIPTICAL  
POWER CORD  
circuit. It is recommended that the elliptical be used  
with a 15 amp circuit for optimal performance.  
• Keep the topside of the foot support clean and dry.  
• Care should be taken when mounting or dismounting the equipment. Before mounting or dismounting,  
bring the elliptical to 0% incline and move the pedal on the mounting or dismounting side to its lowest  
position and bring the machine to a complete stop.  
OPERATION  
• Disconnect all power before servicing the equipment.  
To reduce the risk of damaging important components on your elliptical, it is strongly  
recommended that your elliptical is plugged into a dedicated 15 amp circuit, without  
the use of an additional extension cord and/or power strip. Failure to comply may void  
the warranty.  
WARNING  
At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet.  
At NO time should children under the age of 12 use the elliptical.  
Children over the age of 12 should not use the elliptical without adult supervision.  
It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been  
exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is  
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.  
E900_E1200_Rev.2.7.indd 4-5  
6/16/08 9:45:27 AM  
ASSEMBLY  
DISPLAY  
MP3 POCKET  
LEFT HANDLEBAR  
PULSE GRIP  
CONSOLE  
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!  
BOTTLE HOLDER  
CONSOLE MAST  
RIGHT HANDLEBAR  
CONSOLE MAST BOOT  
HANDLEBAR COVERS  
WARNING  
There are several areas during the assembly process of an elliptical that special attention must be paid.  
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly  
tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that  
are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical,  
the assembly instructions must be reviewed and corrective actions should be taken.  
POWER CORD SOCKET  
ELBOW COVER  
PIVOTING FOOT PAD  
PEDAL ARM  
FRONT STABILIZER TUBE  
LOWER LINK ARM  
UNPACKING  
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended  
that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and  
bolts are in place and partially threaded in before completely tightening any ONE bolt.  
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium  
bike grease is recommended.  
TOOLS INCLUDED  
PARTS INCLUDED  
c 6 Hardware Bags  
c 1 Console  
c 5mm Allen Wrench  
c 6mm Allen Wrench  
c Phillips Screw Driver  
c 13/15mm Flat Wrench  
c 5mm T Wrench  
c 2 Handlebar Covers  
c2 Elbow Covers  
c 1 Console Mast  
c 1 Front Stabilizer Tube  
c 1 Left Handlebar  
c 1 Right Handlebar  
c 2 Lower Link Arms  
c 2 Pivoting Foot Pads  
c Console Mast Boot  
c Power Cord  
Before proceeding, find your elliptical’s serial number  
located on the front stabilizer tube and enter it in the  
space provided below. Also locate the model name  
which is located on the mast boot.  
c2 Pedal Arm Covers  
cWater Bottle Holder  
®
c3 iPod Dock Inserts  
c1 Universal MP3 Player Dock Insert  
ENTER YOUR SERIAL NUMBER AND  
MODEL NAME IN THE BOxES BELOW:  
SERIAL NUMBER:  
®
c1 iPod Docking Station Rubber Plug  
cAudio Adaptor Cable  
c2 Pedal Arms  
MODEL NAME:  
If you have questions or if there are any missing parts, contact Customer Tech Support.  
Contact information is located on the back panel of this manual.  
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.  
* Also enter this serial number on your Warranty Card.  
E900_E1200_Rev.2.7.indd 6-7  
6/16/08 9:45:34 AM  
ASSEMBLY STEP 1  
ASSEMBLY STEP 2  
BOLT (A)  
CONSOLE WIRES  
BOLT (B)  
SPRING WASHER (C)  
ARC WASHER (E)  
CONSOLE MAST BOOT  
WATER BOTTLE HOLDER  
FRONT STABILIZER TUBE  
PRE-ATTACHED  
ALIGNMENT BOLT  
BOLT (B)  
SPRING WASHER (C)  
FLAT WASHER (D)  
BOLTS (F)  
CONSOLE MAST  
MAIN FRAME  
CONSOLE MAST  
MAIN FRAME  
A. Open HARDWARE BAG FOR STEP 2.  
B. Remove PRE-ATTACHED ALIGNMENT BOLT from CONSOLE MAST.  
C. Slide CONSOLE MAST BOOT onto the bottom of the CONSOLE MAST.  
A) Open HARDWARE BAG FOR STEP 1.  
D. Put ALIGNMENT BOLT back into CONSOLE MAST, screwing it in only half way.  
B) Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A).  
E. Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the  
CONSOLE MAST.  
HARDWARE BAG FOR STEP 1 CONTENTS :  
F. Attach the CONSOLE MAST to the MAIN FRAME using 6 BOLTS (B), 6 SPRING WASHERS (C),  
4 FLAT WASHERS (D) and 2 ARC WASHERS (E).  
BOLT (A)  
20 mm  
Qty: 2  
DO NOT PINCH WIRES!  
G. Attach the WATER BOTTLE HOLDER to the mast using 2 BOLTS (F).  
HARDWARE BAG FOR STEP 2 CONTENTS :  
BOLT (B)  
20 mm  
Qty: 6  
SPRING WASHER (C)  
15 mm  
Qty: 6  
FLAT WASHER (D)  
18 mm  
Qty: 4  
ARC WASHER (E)  
17 mm  
Qty: 2  
BOLT (F )  
12 mm  
Qty: 2  
angle view  
9
E900_E1200_Rev.2.7.indd 8-9  
6/16/08 9:45:39 AM  
ASSEMBLY STEP ꢀ  
ASSEMBLY STEP ꢁ  
PIVOT TUBE  
RIGHT HANDLEBAR  
PRE-ATTACHED NUT AND WASHERS  
PEDAL ARM  
PRE-ATTACHED WASHER  
PRE-ATTACHED SCREW  
CONSOLE MAST  
PRE-ATTACHED BOLT  
PEDAL ARM COVER  
PRE-ATTACHED WAVY WASHER  
HANDLEBAR COVER  
PRE-ATTACHED SCREW  
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.  
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.  
A) Remove PRE-ATTACHED NUT & WASHERS from CONSOLE MAST.  
B) Remove PRE-ATTACHED SCREW from RIGHT HANDLEBAR.  
A) Remove PRE-ATTACHED BOLT & WASHERS from PIVOT TUBE.  
B) Slide PEDAL ARM onto PIVOT TUBE and attach by re-inserting PRE-ATTACHED BOLT and WASHERS.  
C) Repeat on the other side.  
C) Slide RIGHT HANDLEBAR onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED NUT & WASHERS.  
D) Attach the PEDAL ARM COVER to the right PEDAL ARM using PRE-ATTACHED SCREW.  
E) Repeat on the other side.  
After handlebars are assembled they will rotate freely – be cautious. Until the  
machine is fully assembled, do not grab the handlebars for support.  
WARNING  
D) Snap HANDLEBAR COVERS together over the RIGHT HANDLEBAR. Note the position of the snap tabs on the  
covers before snapping into position.  
E) Attach HANDLEBAR COVERS with PRE-ATTACHED SCREW.  
F) Repeat on other side.  
10  
11  
E900_E1200_Rev.2.7.indd 10-11  
6/16/08 9:45:43 AM  
ASSEMBLY STEP ꢂ  
ASSEMBLY STEP ꢃ  
LINK ARM  
U-BRACKET  
CONNECTING TUBE  
PEDAL ARM  
FOOTPAD  
LINK ARM  
LINK ARM  
U BRACKET  
PEDAL ARM  
SPLIT TEFLON  
WASHER (J)  
BOLT (L)  
INSERT  
WASHERS (H)  
SCREWS (G)  
SPACER  
THIS  
DIRECTION  
CONNECTING TUBE  
SPACER (I)  
FLAT WASHER (K)  
A) Open HARDWARE BAG FOR STEP 5.  
A) Open HARDWARE BAG FOR STEP 6.  
B) Attach FOOTPAD to LINK ARM using 4 SCREWS (G) and 4 WASHERS (H).  
B) Align the U-BRACKET on the RIGHT LOWER LINK ARM with the CONNECTING TUBE on the RIGHT PEDAL ARM.  
C) Slide the SPACER (I) through the U-BRACKET and the CONNECTING TUBE so that it can no longer rotate.  
D) Insert 2 SPLIT TEFLON WASHERS (J) between the CONNECTING TUBE and the U-BRACKET.  
E) Secure the joint with a FLAT WASHER (K) and BOLT (L).  
C) Repeat on other side.  
F) Repeat on the other side.  
HARDWARE BAG FOR STEP ꢃ CONTENTS :  
HARDWARE BAG FOR STEP ꢂ CONTENTS :  
SPACER (I)  
71 mm axis  
Qty: 2  
WASHER (H)  
18 mm  
Qty: 8  
SCREW (G)  
12 mm  
Qty: 8  
BOLT (L)  
15 mm  
Qty: 2  
SPLIT TEFLON WASHER (J)  
28 mm  
Qty: 4  
FLAT WASHER (K)  
35 mm  
Qty: 2  
12  
1ꢀ  
E900_E1200_Rev.2.7.indd 12-13  
6/16/08 9:46:04 AM  
ASSEMBLY STEP ꢄ  
ASSEMBLY STEP ꢅ  
LOWER  
LOWER LINK ARM  
SPACER RINGS (O)  
HANDLEBAR  
SPACER (N)  
INSIDE ELBOW COVER  
SCREWS (S)  
INSIDE ELBOW COVER  
SCREWS (S)  
NUT (Q)  
LOWER HANDLEBAR  
WASHER (P)  
BOLT (M)  
OUTSIDE ELBOW COVER  
SCREWS (R)  
OUTSIDE ELBOW COVER  
SCREWS (R)  
PRE-ATTACHED  
HARDWARE  
A) Open HARDWARE BAG FOR STEP 8.  
SPACER (N)  
SPACER RING (O)  
B) Attach the INSIDE and OUTSIDE ELBOW COVERS to the right LOWER LINK ARM using 2 SCREWS (R).  
C) Tighten the ELBOW COVERS together at the front using 1 SCREW (S).  
D) Repeat on other side.  
LOWER LINK ARM  
A) Open HARDWARE BAG FOR STEP 7.  
Confirm that the  
B) Slide SPACER (N) into LOWER LINK ARM.  
LOWER HANDLEBAR  
and the LOWER LINK ARM  
are marked R. The left  
side is marked L.  
C) Place 2 SPACER RINGS (O) on both sides of SPACER (N). While holding  
SPACER RINGS (O), slide LOWER LINK ARM into bottom end of LOWER  
HANDLEBAR.  
D) Insert 1 BOLT (M) into LOWER HANDLEBAR and secure using 1 WASHER  
(P) and 1 NUT (Q).  
E) Repeat on other side.  
HARDWARE BAG FOR STEP ꢅ CONTENTS :  
HARDWARE BAG FOR STEP ꢄ CONTENTS :  
BOLT (M)  
45 mm  
Qty: 2  
SPACER (N)  
Qty: 2  
SCREW (R)  
8 mm  
Qty: 4  
SCREW (S)  
10 mm  
Qty: 2  
WASHER (P)  
18 mm  
Qty: 2  
NUT (Q)  
18 mm  
Qty: 2  
SPACER RING (O)  
Qty: 4  
1ꢁ  
1ꢂ  
E900_E1200_Rev.2.7.indd 14-15  
6/16/08 9:46:14 AM  
ASSEMBLY STEP 9  
CONSOLE  
PRE-ATTACHED SCREWS  
CONSOLE WIRES  
CONSOLE MAST  
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.  
A) Attach the CONSOLE MAST wires to the CONSOLE wires.  
B) Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.  
C) Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS (screws will have to be removed  
from the console first).  
DO NOT PINCH WIRES!  
D) Insert RUBBER PLUG into iPod® DOCKING STATION.  
iPod® Docking Station Rubber Plug  
iPod® Docking Station  
YOU’RE FINISHED!  
1ꢃ  
1ꢄ  
E900_E1200_Rev.2.7.indd 16-17  
6/16/08 9:46:27 AM  
BEFORE YOU BEGIN  
ELLIPTICAL OPERATION  
CONGRATULATIONS! on choosing your elliptical. You’ve taken an important step in developing and  
sustaining an exercise program! Your elliptical is a tremendously effective tool for achieving your personal  
fitness goals. Regular use of your elliptical can improve the quality of your life in so many ways.  
POWER  
Your programmable elliptical is powered by a power supply. The power must be plugged into the power jack,  
which is located in the front of the machine near the STABILIZER TUBE. Make sure the console power switch,  
located next to the power jack, is in the ON position.  
HERE ARE jUST A FEW OF THE HEALTH BENEFITS OF ExERCISE:  
• Weight Loss  
• A Healthier Heart  
• Improved Muscle Tone  
• Increased Daily Energy Levels  
INCLINE OPERATION  
If the stop button is pressed to pause the program, the incline motor will remain at its current height. To  
return the incline to 0%, press start and change the incline to 0% before dismounting. If the stop button is  
held for 3 seconds to reset the console, the incline will return to 0%.  
The key to reaping these benefits is to develop an exercise habit. Your new  
ꢃꢁGPPU  
elliptical will help you eliminate obstacles that prevent you from exercising.  
Inclement weather and darkness won't interfere with your workout when you  
use your elliptical in the comfort of your home. This guide provides you with  
basic information for using and enjoying your new machine.  
Do not operate the elliptical if the power cord or plug is damaged.  
If the elliptical appears to not be working properly, do not use the elliptical.  
WARNING  
ꢀꢁGFFU  
ꢀꢁGFFU  
LOCATION OF THE ELLIPTICAL  
Place the elliptical on a level surface. There should be 6 feet of clearance  
behind the elliptical, 3 feet on each side and one foot in front for the power  
cord (See diagram to the right). Do not place the elliptical in any area that  
will block any vent or air openings. The elliptical should not be located in a  
garage, covered patio, near water or outdoors.  
MOVING  
Your elliptical has a pair of transport wheels built  
into the FRONT STABILIZER TUBE. To move, first  
remove the power supply and firmly grasp the  
REAR STABILIZER BAR, carefully lift and roll.  
ꢂꢁGFFU  
Our ellipticals are well built and heavy, weighing up to 280 lbs! Use care and  
additional help if necessary when moving.  
WARNING  
FOOT POSITIONING  
Your elliptical offers a variety of foot positions. Moving your foot to the forward most position of the foot pad  
increases your step height, which will create a feel similar to a step machine. Placing your foot toward the back  
of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run.  
Your elliptical also allows you to pedal both forward and backwards to offer a variation to your workout and to  
focus on other major leg muscle groups such as your hamstrings and calves.  
1ꢅ  
19  
E900_E1200_Rev.2.7.indd 18-19  
6/16/08 9:46:30 AM  
E900 CONSOLE DISPLAY  
E1200 CONSOLE DISPLAY  
R
R
P
P
Q
Q
A
Q
Q
A
I N C L I N E  
%
R E S I S TA N C E  
I N C L I N E  
%
R E S I S TA N C E  
B
B
100  
16  
100  
16  
P
R
E
S
S
T
O
S
W
I
T
C
H
P
R
E
S
S
T
O
S
W
I
T
C
H
TIME  
DISTANCE  
DATE  
TIME  
DISTANCE  
DATE  
80  
60  
14  
12  
80  
60  
14  
12  
10  
8
CLOCK  
CLOCK  
SPEED  
CALORIES  
SPEED  
CALORIES  
RPM  
CURRENT WORKOUT  
AVERAGE WORKOUT  
LAST WORKOUT  
WEEKLY GOAL  
WEEKLY TOTAL  
LIFETIME TOTAL  
50  
40  
30  
20  
10  
10  
8
50  
C
C
INCLINE  
HEART RATE  
WATTS  
INCLINE  
HEART RATE  
40  
J
L
J
L
GETTING STARTED  
GETTING STARTED  
SELECT A USER OR  
PRESS ENTER TO SKIP  
ADJUST WORKOUT  
SETTINGS  
SELECT A USER OR  
PRESS ENTER TO SKIP  
ADJUST WORKOUT  
SETTINGS  
30  
20  
10  
6
4
2
SELECT A WORKOUT, PRESS ENTER  
BEGIN WORKOUT  
6
SELECT A WORKOUT, PRESS ENTER  
BEGIN WORKOUT  
H
H
WEIGHT  
LOSS  
CARDIO  
STRIDE  
POWER  
STRIDE  
WEIGHT  
LOSS  
CARDIO  
STRIDE  
POWER  
STRIDE  
ENERGY  
ZONES  
PRESS TO  
BEGIN  
F
F
U S E R U S E R  
MANUAL  
PRESS TO  
BEGIN  
U S E R  
1
U S E R  
2
MANUAL  
WORKOUTS WORKOUTS WORKOUTS  
WORKOUTS WORKOUTS WORKOUTS  
1
2
4
P1  
P2 P3 P4 P5 P6 P7 P8 P9 P10  
P11  
P1  
P2 P3 P4  
P5 P6 P7  
P8 P9 P10  
VOLUME –  
VOLUME +  
TARGET  
HR  
MY  
MY  
INCLINE 1 INCLINE 2  
ENERGY  
ZONES  
P11  
MY  
E N T E R  
WORKOUT 1 WORKOUT 2  
E N T E R  
INCLINE 1  
INCLINE 2  
E N T E R  
WORKOUT  
E N T E R  
Heart Rate Receiver  
P12  
P13  
P14  
P15  
P16  
2
P12  
P13  
P14  
I
I
G
G
T
SHOW  
CLOCK/  
DATE  
CHANGE  
DISPLAY  
SHOW  
CLOCK/  
DATE  
CHANGE  
DISPLAY  
N
O
N
O
iPod® Controls  
K
D
S
E
M
K
D
S
E
M
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed.  
A) MONITOR DISPLAY: Time, Distance, Clock and Date.  
Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed.  
A) MONITOR DISPLAY: Time, Distance, Clock and Date.  
B) eTRAK™ BUTTON: Used to scroll through eTRAK™ display modes.  
B) eTRAK™ BUTTON: Used to scroll through eTRAK™ display modes.  
C) ALPHA-NUMERIC WINDOW: Indicates exercise feedback (speed, heart rate, calories, resistance and elevation)  
and help text.  
C) ALPHA-NUMERIC WINDOW: Indicates exercise feedback (speed, heart rate, calories, resistance and elevation)  
and help text.  
D) START: Press start to begin exercising, starts your workout, or resume exercising after pause.  
E) STOP: Press to pause/end your workout. Hold for 3 seconds to reset the elliptical.  
F) USER 1 / USER 2: Used to select which user’s eTRAK™ data to activate, access and update.  
G) WORKOUT QUICK KEYS: Press to select a workout. Press ENTER to confirm selection.  
H) +/- WORKOUT SETTING KEYS / iPod VOLUME KEYS: Used to adjust program settings and iPod volume.  
I) ENTER: Used to set your workout and change workout settings.  
D) START: Press start to begin exercising, starts your workout, or resume exercising after pause.  
E) STOP: Press to pause/end your workout. Hold for 3 seconds to reset the elliptical.  
F) USER 1 / USER 2: Used to select which user’s eTRAK™ data to activate, access and update.  
G) WORKOUT QUICK KEYS: Press to select a workout. Press ENTER to confirm selection.  
H) +/- WORKOUT SETTING KEYS: Used to adjust your program settings.  
I) ENTER: Used to set your workout and change workout settings.  
J) QUICK INCLINE KEYS: Used to reach desired incline more quickly.  
J) QUICK INCLINE KEYS: Used to reach desired incline more quickly.  
K) INCLINE + / - KEYS: Used to adjust incline in small increments (5% increments).  
L) QUICK RESISTANCE KEYS: Used to reach desired resistance more quickly.  
M) RESISTANCE + / - KEYS: Used to adjust resistance in small increments (increments of 1).  
N) CHANGE DISPLAY BUTTON: Press to change display feedback during workout.  
O) CLOCK/DATE BUTTON: Displays clock and date data in display windows.  
P) MPꢀ PLAYER POCKET: Holds your MP3 player.  
Q) SPEAKERS: Music plays through speakers when your CD / MP3 player is connected to the console.  
R) AUDIO IN JACK: Plug your CD / MP3 player into the console using the included audio adaptor cable.  
S) AUDIO OUT / HEADPHONE JACK: Plug your headphones into this jack to listen to your music through the  
headphones. NOTE: When headphones are plugged into the headphone jack the sound will no longer come out  
through the speakers.  
K) INCLINE + / - KEYS: Used to adjust incline in small increments (5% increments).  
L) QUICK RESISTANCE KEYS: Used to reach desired resistance more quickly.  
M) RESISTANCE + / - KEYS: Used to adjust resistance in small increments (increments of 1).  
N) CHANGE DISPLAY BUTTON: Press to change display feedback during workout.  
O) CLOCK/DATE BUTTON: Displays clock and date data in display windows.  
®
P) iPod DOCKING STATION / MPꢀ PLAYER POCKET: Used to dock your iPod® or store your MP3 player.  
Q) SPEAKERS: Music plays through speakers when your CD / MP3 player is connected to the console.  
R) AUDIO IN JACK: Plug your CD / MP3 player into the console using the included audio adaptor cable.  
S) AUDIO OUT / HEADPHONE JACK: Plug your headphones into this jack to listen to your music through the  
headphones. NOTE: When headphones are plugged into the headphone jack the sound will no longer come out  
through the speakers.  
®
®
T) iPod CONTROLS: Allows you to control your docked iPod while working out.  
20  
21  
E900_E1200_Rev.2.7.indd 20-21  
6/16/08 9:46:33 AM  
E900 AND E1200 CONSOLE OPERATION  
DATE & CLOCK SETUP  
WORKOUT PROFILES  
MANUAL  
Allows you to adjust the resistance level and incline to your preference, without a preset program.  
1) Enter Setup Mode: Press and hold MANUAL and WEIGHT LOSS WORKOUTS program buttons for 3 seconds.  
2) Once in setup mode, use the +/– KEYS to scroll through settings.  
3) Use the ENTER button to confirm settings.  
WEIGHT LOSS  
Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat burning zone.  
4) Settings include: MONTH, DAY, YEAR, HOUR, MINUTE, and AM/PM.  
CARDIO STRIDE  
Creates an intense cardio workout by raising and lowering resistance levels through-out your workout.  
5) Review Settings: You can review your settings at any time while in Setup Mode. Use the ENTER button to  
scroll through settings.  
POWER STRIDE  
6) Exit Setup Mode: To confirm the Date and Time, press and hold ENTER for 5 seconds.  
Enhances your strength, speed and endurance by increasing and decreasing resistance at specific intervals.  
7) To Reset: Simply reenter Setup Mode and adjust Date and Time to the correct setting.  
ENERGY ZONES  
Automatically adjusts resistance levels to keep your watt output at the level you select.  
QUICK START  
INCLINE 1 & 2  
1) Turn on Elliptical (switch is located at the bottom-front of the Elliptical).  
Engages all major muscle groups of the upper and lower body through varied resistance and incline levels to  
tone muscle and increase endurance and stamina.  
2) Press START button and begin exercising.  
MY WORKOUT (E900 ONLY)  
ꢀ) Program will automatically default to MANUAL (P1), the time will count up from 0:00, the resistance  
Design and store your own custom exercise program.  
will default to level 1, and the incline will default to 0%.  
ꢁ) The resistance and incline level can be adjusted during the workout.  
MY WORKOUT 1 & 2 (E1200 ONLY)  
Design and store your own custom exercise program.  
TARGET HR (E1200 ONLY)  
Automatically adjust the resistance level to keep your heart rate in your desired range.  
ꢃ0% OF MAx HEART RATE: Used for beginners and longer workouts. Lower intensity and longer duration  
helps burn fat more efficiently.  
ꢃꢂ% OF MAx HEART RATE: Used for beginner to intermediate users and mid to long range workouts. Lower  
intensity and longer duration helps burn fat more efficiently.  
ꢄ0% OF MAx HEART RATE: For intermediate users and mid range cardio workouts. While this range burns  
fat it really challenges the cardiovascular system and helps strengthen the heart.  
ꢄꢂ% OF MAx HEART RATE: For advanced users and short to mid range cardio workouts. Burns fat, tones  
muscles and challenges the heart.  
ꢅ0% OF MAx HEART RATE: For advanced users and short workouts. Burns fat, strengthens and tones  
muscles, and challenges the entire cardiovascular system.  
22  
2ꢀ  
E900_E1200_Rev.2.7.indd 22-23  
6/16/08 9:46:33 AM  
WORKOUT: CARDIO STRIDE WORKOUTS  
Motivates with different combinations of RESISTANCE. TIme-based goal.  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
WORKOUT INFORMATION  
WORKOUT: MANUAL  
Allows ‘On The Fly’ manual RESISTANCE and INCLINE changes. Time-based goal.  
2) Select CARDIO STRIDE WORKOUTS using the WORKOUT QUICK KEY and press ENTER.  
NOTE: CARDIO STRIDE WORKOUTS key represents multiple programs: Pꢂ, Pꢃ, and Pꢄ. Press CARDIO  
STRIDE WORKOUTS key once and Pꢂ will display, press twice for Pꢃ and press 3 times for Pꢄ.  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
2) Select MANUAL (P1) using the WORKOUT QUICK KEY and press ENTER.  
ꢀ) Set Time using the +/- KEYS and press ENTER.  
ꢀ) Set Time using the +/- KEYS and press ENTER.  
Then set INCLINE using the +/- KEYS and press ENTER.  
Next set RESISTANCE using the +/- KEYS and press ENTER.  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
E900 & E1200 P5  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
60  
5
60  
6
60  
60  
60  
60  
10  
2
60  
11  
1
60  
12  
2
60  
13  
3
60  
14  
2
60  
15  
1
60  
16  
1
60  
17  
1
60  
18  
1
WORKOUT: WEIGHT LOSS WORKOUTS  
2
3
7
8
9
1
1
2
2
1
2
3
4
3
Challenges with various combinations of RESISTANCE to keep you in the fat burning zone.  
Warm up and cool-down last 4:00 minutes each  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
E900 & E1200 P6  
2) Select WEIGHT LOSS WORKOUTS using the WORKOUT QUICK KEY and press ENTER.  
NOTE: WEIGHT LOSS WORKOUTS key represents multiple programs: P2, Pꢀ, and Pꢁ. Press WEIGHT LOSS  
WORKOUTS key once and P2 will display, press twice for Pꢀ and press 3 times for Pꢁ.  
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
60  
5
60  
6
60  
60  
60  
60  
10  
8
60  
11  
7
60  
12  
6
60  
13  
5
60  
14  
4
60  
15  
2
60  
16  
1
60  
17  
1
60  
18  
1
2
3
7
8
9
2
2
3
3
3
4
5
6
7
ꢀ) Set Time using the +/- KEYS and press ENTER.  
Warm up and cool-down last 4:00 minutes each  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
E900 & E1200 P7  
E900 & E1200 P2  
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
60  
5
60  
6
60  
60  
60  
60  
10  
10  
60  
11  
9
60  
12  
8
60  
13  
7
60  
14  
6
60  
15  
3
60  
16  
3
60  
17  
2
60  
18  
1
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
60  
5
60  
6
60  
7
60  
60  
60  
10  
6
60  
11  
6
60  
12  
6
60  
13  
5
60  
14  
5
60  
15  
4
60  
16  
4
60  
17  
3
60  
18  
2
60  
19  
2
60  
20  
1
2
3
7
8
9
3
4
4
4
5
6
7
8
9
2
3
8
9
1
2
2
3
4
4
5
5
6
Warm up and cool-down last 4:00 minutes each  
Warm up and cool-down last 4:00 minutes each  
E900 & E1200 P3  
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
60  
5
60  
6
60  
7
60  
60  
60  
10  
8
60  
11  
8
60  
12  
8
60  
13  
7
60  
14  
7
60  
15  
6
60  
16  
6
60  
17  
5
60  
18  
2
60  
19  
2
60  
20  
1
2
3
8
9
1
2
2
5
6
6
7
7
8
Warm up and cool-down last 4:00 minutes each  
E900 & E1200 P4  
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
60  
5
60  
6
60  
7
60  
60  
60  
10  
10  
60  
11  
10  
60  
12  
10  
60  
13  
9
60  
14  
9
60  
15  
8
60  
16  
8
60  
17  
7
60  
18  
5
60  
19  
3
60  
20  
2
2
3
8
9
2
3
5
7
8
8
9
9
10  
Warm up and cool-down last 4:00 minutes each  
2ꢁ  
2ꢂ  
E900_E1200_Rev.2.7.indd 24-25  
6/16/08 9:46:36 AM  
WORKOUT: INCLINE 1 & 2  
WORKOUT: POWER STRIDE WORKOUTS  
Challenges with various combinations of RESISTANCE at specific INTERVALS. Time-based goal.  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
Takes your strength and endurance to the next level of fitness with intense combinations of resistance and elevation.  
Time based goal with 8 difficulty levels to choose from. Note: All elevations are listed as a percent of total elevation.  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
2) Select POWER STRIDE WORKOUTS using the WORKOUT QUICK KEY and press ENTER.  
NOTE: POWER STRIDE WORKOUTS key represents multiple programs: Pꢅ, P9, and P10. Press POWER  
STRIDE WORKOUTS key once and Pꢅ will display, press twice for P9 and press 3 times for P10.  
2) Select INCLINE 1 or INCLINE 2 using the WORKOUT QUICK KEYS and press ENTER.  
ꢀ) Set TIME using the +/- KEYS and press ENTER.  
Then set the LEVEL using the +/- KEYS and press ENTER.  
ꢀ) Set Time using the +/- KEYS and press ENTER.  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
INCLINE 1 E900 & E1200 P12  
E900 & E1200 P8  
WARM UP  
WORKOUT SEGMENTS - REPEAT  
COOL DOWN  
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
MINUTES  
LEVELS  
2:00  
2:00  
2:00  
1:00  
2:00  
1:00  
2:00  
1:00  
2:00  
1:00  
2:00  
2:00  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
30  
5
60  
6
60  
7
30  
30  
60  
10  
3
30  
11  
7
60  
12  
3
60  
13  
3
30  
14  
7
30  
15  
7
60  
16  
3
60  
17  
4
60  
18  
2
60  
19  
2
60  
20  
1
1
0
2
9
10  
11  
5
12  
2
3
8
9
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
ELEVATION  
RESISTANCE  
5
2
0
1
10  
3
0
1
10  
3
0
1
10  
6
0
1
10  
6
0
1
1
2
2
4
7
3
3
7
7
1
2
3
4
5
6
7
8
1
2
Warm up and cool-down last 4:00 minutes each  
0
10  
3
5
20  
5
5
20  
5
5
30  
7
5
30  
7
5
0
1
2
2
2
2
2
1
E900 & E1200 P9  
5
10  
3
10  
3
30  
7
10  
3
30  
7
10  
3
35  
8
10  
3
35  
8
10  
3
5
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
2
2
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
30  
5
60  
6
60  
7
30  
30  
60  
10  
5
30  
11  
9
60  
12  
5
60  
13  
5
30  
14  
9
30  
15  
9
60  
16  
5
60  
17  
6
60  
18  
5
60  
19  
3
60  
20  
2
5
15  
4
15  
4
40  
9
15  
4
40  
9
20  
5
45  
10  
55  
12  
65  
14  
70  
15  
75  
16  
20  
5
45  
10  
55  
12  
65  
14  
70  
15  
75  
16  
10  
3
5
2
3
8
9
2
3
5
6
9
5
5
9
9
2
2
Warm up and cool-down last 4:00 minutes each  
10  
3
10  
3
25  
6
50  
11  
60  
13  
65  
14  
70  
15  
25  
6
50  
11  
60  
13  
65  
14  
70  
15  
30  
7
30  
7
20  
5
10  
3
E900 & E1200 P10  
10  
3
15  
4
35  
8
35  
8
40  
9
40  
9
20  
5
10  
3
WARM-UP  
WORKOUT SEGMENTS - REPEAT  
COOL-DOWN  
SECONDS  
SEGMENT  
LEVEL  
60  
1
60  
60  
60  
4
30  
5
60  
6
60  
7
30  
30  
60  
10  
7
30  
11  
11  
60  
12  
7
60  
13  
7
30  
14  
11  
30  
15  
11  
60  
16  
7
60  
17  
8
60  
18  
5
60  
19  
3
60  
20  
2
15  
4
15  
4
40  
9
40  
9
45  
10  
50  
11  
45  
10  
50  
11  
20  
5
10  
3
2
3
8
9
2
3
5
8
11  
7
7
11  
11  
15  
4
20  
5
45  
10  
45  
10  
20  
5
10  
3
Warm up and cool-down last 4:00 minutes each  
WORKOUT: ENERGY ZONE  
A unique program that allows you to vary your cadence or RPM and the resistance will adjust accordingly to your  
selected goal. The quicker you pedal the less resistance for the goal selected.  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
2) Select ENERGY ZONES using the WORKOUT QUICK KEY and press ENTER.  
ꢀ) Set TIME using the +/- KEYS and press ENTER. Then set WATTS using the +/- KEYS and press ENTER.  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
2ꢃ  
2ꢄ  
E900_E1200_Rev.2.7.indd 26-27  
6/16/08 9:46:38 AM  
WORKOUT INFORMATION  
INCLINE 2 E900 & E1200 P13  
SELECTING MY WORKOUT (E900 ONLY)  
WARM UP  
WORKOUT SEGMENTS – REPEAT  
COOL DOWN  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
2) Select MY WORKOUT using the WORKOUT QUICK KEYS and press ENTER.  
ꢀ) Set Time using the +/- KEYS and press ENTER.  
SECONDS  
LEVELS  
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60  
1
5
1
2
5
2
5
2
5
3
9
10 11 12 1ꢀ 1ꢁ 1ꢂ 1ꢃ 1ꢄ 1ꢅ 19 20  
ELEVATION  
15 15 15 10 10 10 10 10 10 15 15 15  
5
3
5
2
5
2
5
1
1
2
3
4
5
6
7
8
Then set the RESISTANCE PROFILES using the +/- KEYS and press ENTER after each RESITANCE  
PROFILE is set to the desired level (repeat until all 15 segments are chosen).  
Next set the INCLINE PROFILES using the +/- KEYS and press ENTER after each INCLINE PROFILE is set  
to the desired level (repeat until all 15 segments are choose).  
RESISTANCE  
4
4
5
5
6
6
6
6
5
5
4
4
ELEVATION 10 10 10 10 20 20 20 15 15 15 15 15 15 20 20 20 10 10 10 10  
RESISTANCE  
ELEVATION 15 15 15 15 30 30 30 25 25 25 25 25 25 30 30 30 15 15 15 15  
RESISTANCE 10 10 10 10  
ELEVATION 20 20 20 20 40 40 40 35 35 35 35 35 35 40 40 40 20 20 20 20  
RESISTANCE 10 10 11 12 12 11 10 10  
ELEVATION 25 25 25 25 50 50 50 45 45 45 45 45 45 50 50 50 25 25 25 25  
RESISTANCE 11 11 12 13 13 12 11 11  
ELEVATION 30 30 30 30 60 60 60 55 55 55 55 55 55 60 60 60 30 30 30 30  
RESISTANCE 10 10 12 12 13 14 14 13 12 12 10 10  
ELEVATION 35 35 35 35 70 70 70 65 65 65 65 65 65 70 70 70 35 35 35 35  
RESISTANCE 11 11 13 13 14 15 15 14 13 13 11 11  
ELEVATION 40 40 40 40 80 80 80 75 75 75 75 75 75 80 80 80 40 40 40 40  
RESISTANCE 12 12 14 14 15 16 16 15 14 14 12 12  
1
2
2
3
6
6
7
7
8
8
8
8
7
7
6
6
3
2
2
1
2
2
3
3
7
7
9
9
9
9
7
7
3
3
2
2
ꢁ) Press the PRESS TO BEGIN key to start workout.  
*NOTE: To reset the memory press and hold the ENTER button for 5 seconds.  
2
2
3
3
8
8
8
8
3
3
2
2
SELECTING MY WORKOUT 1 & 2 (E1200 ONLY)  
3
3
4
4
9
9
9
9
4
4
3
3
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
2) Select MY WORKOUT 1 or MY WORKOUT 2 using the WORKOUT QUICK KEYS and press ENTER.  
ꢀ) Set Time using the +/- KEYS and press ENTER.  
3
3
4
4
4
4
3
3
4
4
5
5
5
5
4
4
Then set the RESISTANCE PROFILES using the +/- KEYS and press ENTER after each RESITANCE  
PROFILE is set to the desired level (repeat until all 15 segments are chosen).  
Next set the INCLINE PROFILES using the +/- KEYS and press ENTER after each INCLINE PROFILE is set  
to the desired level (repeat until all 15 segments are choose).  
4
4
5
5
5
5
4
4
ꢁ) Press the PRESS TO BEGIN key to start workout.  
*NOTE: To reset the memory press and hold the ENTER button for 5 seconds.  
SELECTING TARGET HR WORKOUT (E1200 ONLY)  
1) Select USER 1, USER 2, or press ENTER to skip to STEP 2.  
2) Select TARGET HR using the WORKOUT QUICK KEY and press ENTER.  
ꢀ) Set TARGET HR.  
The HEART RATE window will flash showing the default target heart rate of 80 beats per minute. Select  
your target heart rate (from the chart on page 34) using the +/- KEYS and press ENTER.  
*NOTE: Target heart rate is selected in multiples of 5 beats.  
ꢁ) Press the PRESS TO BEGIN key to start workout.  
NOTES:  
1) There is a 4-minute warm-up built into this program at level 1 resistance.  
2) After 4 minutes the resistance will automatically adjust to bring your heart rate within 5 beats of the  
target number you selected at the beginning of the program.  
ꢀ) If there is no Heart Rate detected, the unit will not change resistance levels up or down.  
ꢁ) If your Heart Rate is 25 beats over your Target Zone the program will shut down.  
2ꢅ  
29  
E900_E1200_Rev.2.7.indd 28-29  
6/16/08 9:46:40 AM  
ENTERTAINMENT INFORMATION  
USING iPod® AUDIO PLAYER  
USING E900 iPod® VOLUME CONTROL  
To adjust volume on your iPod® while in the DOCKING STATION:  
1) Use the volume dial on your iPod® to adjust volume setting.  
The Horizon Performance iPod® Docking Station is the entertainment solution for your workouts.  
Various models of iPod® with a dock connector can fit with the use of the included inserts.  
Using your iPod® Docking Station (iPod® not included)  
2) If you cannot adjust volume using the iPod volume dial, use the +/- WORKOUT QUICK KEYS / iPod VOLUME  
1) Remove rubber plug from bottom of DOCKING STATION.  
KEYS on the overlay.  
®
Once you have connected the iPod® to the Docking Station, please allow 75 seconds for the iPod® and  
Docking Station to sync up before it will be fully functional.  
2) Place the insert that fits your iPod model into the DOCKING STATION.  
®
ꢀ) Plug in your iPod by matching the dock connector pin on the elliptical with the dock connector  
®
on your iPod .  
®
NOTE: If you want to connect a different sized iPod , simply lift out the insert and replace with a new one.  
®
ADJUST WORKOUT  
SETTINGS  
6
ꢁ) E1200 Only: Use the iPod controls on the bottom of the CONSOLE to adjust volume and song settings.  
ECT A WORKOUT, PRESS ENTER  
BEGIN WORKOUT  
WEIGHT  
LOSS  
CARDIO  
STRIDE  
POWER  
STRIDE  
NOTE: If you don’t want to use the speakers, you can plug your headphones into the AUDIO OUT JACK at  
PRESS TO  
BEGIN  
the bottom of the CONSOLE.  
WORKOUTS WORKOUTS WORKOUTS  
4
2
P2 P3 P4  
P5 P6 P7  
P8 P9 P10  
VOLUME –  
VOLUME +  
ꢂ) Replace the rubber plug into the bottom of the DOCKING STATION when the station is not in use.  
NOTE: iPod® audio will not play through speakers if audio adaptor cable is plugged in while iPod® is in  
the DOCKING STATION.  
MY  
INCLINE 1  
INCLINE 2  
E N T E R  
WORKOUT  
P12  
P13  
P14  
DOCK INSERT  
®
iPod Docking Station  
USING NON-iPod® MPꢀ / CD PLAYERS  
Using SPEAKER/MPꢀ AUDIO FUNCTION  
1) Leave RUBBER PLUG at bottom of DOCKING STATION.  
2) To hold your MPꢀ player in place in the DOCKING STATION, use the UNIVERSAL MPꢀ PLAYER INSERT.  
Note: Only iPods® are compatible with the CONNECTOR PIN in the iPod Docking Station.  
ꢀ) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN  
FRONT OF POCKET  
Universal MP3 Player  
Dock Insert  
JACK on the top of the CONSOLE and the HEADPHONE JACK on  
your CD / MPꢀ player.  
®
iPod Dock Inserts  
ꢁ) Use your CD / MPꢀ player buttons to adjust song settings.  
NOTE: If you don’t want to use the speakers, you can plug your  
headphones into the AUDIO OUT JACK at the bottom of the  
CONSOLE.  
Note: Dock insert sizes vary for each iPod.  
ꢂ) Remove the AUDIO ADAPTOR CABLE when not in use.  
ꢀ0  
ꢀ1  
E900_E1200_Rev.2.7.indd 30-31  
6/16/08 9:46:43 AM  
ꢀ. LAST WORKOUT: This option allows you to view your accumulated data from your last workout. The  
Current Workout becomes the Last Workout once a program has ended or the console has been reset.  
The following information will be shown in each display window:  
INCLINE - Average incline of last workout.  
WORKOUT INFORMATION  
USING eTRAK™ PERFORMANCE TRACKER  
TIME - Total time of last workout.  
CALORIES - Total calories burned during last workout.  
DISTANCE - Total distance of last workout.  
INTRODUCTION  
SPEED - Average speed of last workout.  
Research shows that those who journal their fitness routines or workouts, on average, achieve greater  
success than those who do not. Because your new elliptical is equipped with Horizon’s exclusive  
eTRAK™ Performance Tracker, you’ve taken an important step towards achieving your fitness goals.  
Congratulations!  
RPM - Average RPM of last workout (E1200 only).  
WATTS - Average Watts of last workouts (E1200 only).  
ꢁ. WEEKLY GOAL: This option allows you to set and view your weekly time or distance goal based on a  
calendar week and will run concurrently with the WEEKLY TOTAL function. The following information  
will be shown in each display window:  
eTRAK™ is an innovative new software, integrated into your elliptical console, that will allow you to  
track your fitness progress over time, without the need for paper journals or logs. eTRAK™ allows you to  
easily compare your current workout to your last, average or lifetime workout totals. With quick access to  
feedback like duration of workout or calories burned during previous workouts, you’ll be able to quickly  
and easily see the progress you’ve made. Read further to learn about how eTRAK™ can help motivate  
you to enhance your performance.  
GOAL” or “WEEKLY GOAL”– Indicates the weekly goal you set. LEFT” – Indicates the time or  
distance you have left to complete to meet your weekly goal.  
TIME or DISTANCE – The total time or distance goal you selected and the time or distance you have  
left to complete to meet your weekly goal.  
eTRAK™ OPERATION  
SETUP: To activate eTRAK™ a user MUST be chosen before the program begins. To select a user, simply  
press the User 1 or User 2 button. To deselect a user, press User button again. All accumulated data  
specifically relates to the user that is chosen.  
A. The “GOAL” and “LEFT” will display alternately every 3 seconds.  
B. A “GOAL DONE” message will appear when goal is completed.  
C. If the date and clock are not set and/or a weekly goal is not set, WEEKLY GOAL will display  
zeros.  
Note: If no user is selected and clock and date are not set, no data will be tracked. To set clock and date  
see page 22.  
D. The WEEKLY GOAL will reset at the end of each week and will have to be restarted each week  
using the weekly goal setup instructions.  
RESET: Reset all recorded information for User 1 or User 2 by holding down the user button for 10 seconds.  
Note: This step is permanent and will delete ALL previously accumulated data for the chosen user.  
ꢂ. WEEKLY TOTAL: View your accumulated data from the last Sunday to the present day. Note: This  
data is based on week to date NOT the previous seven days. For instance, if you have not used the  
machine since Sunday, the console will read zeros. The following information will be shown in each  
display window:  
ACCUMULATED DATA: Once eTRAK™ is activated, you can scroll through your accumulated data in multiple  
formats by pressing the eTRAK™ button. A workout is saved when: the program ends, the console is  
paused and not resumed within ten minutes, or the stop button is held to reset the console.  
INCLINE - Average incline of weekly workout.  
TIME - Total time of weekly workout.  
CALORIES - Average weekly calories burned.  
1. CURRENT WORKOUT: The console automatically defaults to Current Workout, displaying your progress  
DISTANCE - Total distance of weekly workout.  
in real time.  
SPEED - Average speed of weekly workout.  
2. AVERAGE WORKOUT: This option allows you to see your average accumulated data for the last 30  
workouts. The following information will be shown in each display window:  
INCLINE - Average incline of workout.  
RPM - Average RPM of weekly workouts (E1200 only).  
WATTS - Average Watts of weekly workouts (E1200 only).  
Note: If the Date and Clock are not set, Weekly Total will default to the Total Workout data.  
TIME - Average workout time.  
CALORIES - Average calories burned.  
ꢃ. LIFETIME TOTAL: This option allows you to view the total accumulated data from your first workout  
to your last saved workout. The following information will be shown in each display window:  
INCLINE - Average incline of workout.  
DISTANCE - Average workout distance.  
SPEED - Average speed of workout.  
RPM - Average RPM of workout (E1200 only).  
TIME - Total accumulated time. Note: If time is greater than 59:59, the time will no longer  
display minutes and will display hours only.  
WATTS - Average Watts of workouts (E1200 only).  
CALORIES - Average calories burned.  
DISTANCE - Total accumulated distance.  
SPEED - Average speed.  
RPM - Average RPM’s (E1200 only).  
WATTS - Average Watts (E1200 only).  
ꢀ2  
ꢀꢀ  
E900_E1200_Rev.2.7.indd 32-33  
6/16/08 9:46:44 AM  
E900 - E1200: WEEKLY GOAL SETUP  
1) Select USER.  
CONDITIONING GUIDELINES  
2) Press eTRAK™ button and scroll to WEEKLY GOAL.  
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.  
ꢀ) Enter the Setup Mode: Press ENTER. Use +/- KEYS to set a time goal. (Leave time at 00:00 if you want to  
set a distance goal).  
HOW OFTEN? (Frequency of Workouts)  
ꢁ) Press ENTER button again and use the +/- KEYS to set a distance goal. If the distance is changed from  
0.00, distance will be the goal.  
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain  
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with  
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make  
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific  
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while  
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a  
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in  
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!  
Note: You may only set a time or distance goal, not both.  
ꢂ) Press ENTER button again to exit the SETUP MODE.  
HEART RATE  
HANDLEBARS  
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your  
heart rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When  
gripping the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure.  
Keep a loose, cupping hold. You may experience an erratic readout if consistently holding the grip pulse  
handlebars. Make sure to clean the pulse sensors to ensure proper contact can be maintained.  
HOW LONG? (Duration of Workouts)  
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per session.  
But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it may  
be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust  
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to  
be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.  
WIRELESS CHEST TRANSMITTER  
BACKSIDE OF CHEST TRANSMITTER  
Prior to wearing the wireless chest transmitter on your  
chest, moisten the two rubber electrodes with water.  
Center the chest strap just below the breast or pectoral  
muscles, directly over your sternum, with the logo facing  
out. NOTE: The chest strap must be tight and properly  
HOW HARD? (Intensity of Workouts)  
How hard you workout is also determined by your goals. If you use your machine to prepare for a 5K workout,  
you will probably work out at a higher intensity than if your goal is general fitness. Regardless of your long  
term goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to  
be beneficial! There are two ways to measure your exercise intensity. The first is by monitoring your heart rate  
(using the grip pulse handlebars or a wireless chest transmitter (for E1200 only) - may be sold separately), and  
the second is by evaluating your perceived exertion level (this is simpler than it sounds!).  
APPLY MOISTURE HERE  
placed to receive an accurate and consistent readout. If  
the chest strap is too loose, or positioned improperly, you  
may receive an erratic or inconsistent heart rate readout.  
WARNING! The heart rate function is not a medical device.  
Various factors may affect the accuracy of your heart rate  
reading. The heart rate reading is intended only as an  
exercise aid.  
PERCEIVED ExERTION LEVEL  
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you  
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb  
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.  
Always be aware of these warning signs of overexertion.  
NOTE: Wireless receiver in E1200 only. Chest strap sold  
separately. Works with Polar® Chest Straps.  
ꢀꢁ  
ꢀꢂ  
E900_E1200_Rev.2.7.indd 34-35  
6/16/08 9:46:46 AM  
TARGET HEART RATE ZONE CHART  
STRETCHING  
5*14  
What is Target Heart Rate Zone?  
STRETCH FIRST  
Before using your product, it is best to take a few minutes to do a few gentle stretching exercises. Stretching  
prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these  
stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing  
Target Heart Rate Zone tells you  
the number of times per minute  
your heart needs to beat to  
these stretches.  
achieve a desired workout effect.  
It is represented as a percentage  
of the maximum number of times  
your heart can beat per minute.  
Target Zone will vary for each  
individual, depending on age,  
current level of conditioning,  
and personal fitness goals. The  
American Heart Association  
recommends working-out at a  
Target Heart Rate Zone of between  
60% and 75% of your maximum  
heart rate. A beginner will want to  
workout in the 60% range while  
a more experienced exerciser will  
want to workout in the 70-75%  
range. See chart for reference.  
1. STANDING CALF MUSCLE STRETCH  
Stand near a wall with the toes of your left foot about 18" from the wall, and  
the right foot about 12" behind the other foot. Lean forward, pushing against  
the wall with your palms. Keep your heels flat and hold this position for a  
count of 15 seconds. Make sure that you do not bounce while stretching.  
Repeat on the other side.  
5
"
3
(
&
5
;
0
/
&
2. STANDING QUADRICEPS STRETCH  
Using a wall to provide balance, grasp your right ankle  
with your right hand and hold your foot against the back  
of your thigh for 15 seconds. Repeat with your left ankle  
and hand.  
ꢆꢁ ꢆꢄ ꢇꢁ ꢇꢄ ꢈꢁ ꢈꢄ ꢄꢁ ꢄꢄ ꢅꢁ ꢅꢄ  
"(&  
ExAMPLE:  
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to  
the target zone bar. Results: 60% of maximum Heart Rate = 108 Beats Per Minute, 75% of maximum  
Heart Rate = 135 Beat Per Minute.  
ꢀ. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH  
Sit on the floor with your legs together and straight out in front of you. Do  
not lock your knees. Extend your fingers towards your toes and hold for a  
count of 15 seconds. Make sure that you do not bounce while stretching. Sit  
upright again. Repeat one time.  
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN ExERCISE PROGRAM.  
ꢀꢃ  
ꢀꢄ  
E900_E1200_Rev.2.7.indd 36-37  
6/16/08 9:46:47 AM  
WEEKLY LOG SHEETS  
THE IMPORTANCE OF WARM UP & COOL DOWN  
5*14  
8&&,ꢀꢁ  
%":  
46/%":  
8&&,-:ꢀ(0"-  
WARM UP  
%"5&  
%*45"/$& $"-03*&4  
5*.&  
$0..&/54  
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your  
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a  
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.  
.0/%":  
56&4%":  
8&%/&4%":  
5)634%":  
'3*%":  
COOL DOWN  
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the  
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart  
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your  
muscles.  
4"563%":  
8&&,-:ꢀ505"-4ꢀꢂ  
ACHIEVING YOUR FITNESS GOALS  
5*14  
8&&,ꢀꢁ  
8&&,-:ꢀ(0"-  
%":  
%"5&  
%*45"/$& $"-03*&4  
5*.&  
$0..&/54  
An important step in developing a long term fitness program is to determine your goals. Is your primary  
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?  
Knowing what your goals are will help you develop a more successful exercise program. Below are some  
common exercise goals:  
46/%":  
.0/%":  
56&4%":  
8&%/&4%":  
5)634%":  
'3*%":  
• Weight Loss - lower intensity, longer duration workouts  
• Improve Body Shape and Tone - interval workouts, alternate between high and low intensities  
• Increased Energy Level - more frequent daily workouts  
4"563%":  
• Improved Sports Performance - high intensity workouts  
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts  
8&&,-:ꢀ505"-4ꢀꢂ  
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.  
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide  
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation  
benefits. Short term goals are easier to achieve. Your console provides you with several readouts that can  
be used to record your progress. You can track Distance, Calories or Time.  
8&&,ꢀꢁ  
8&&,-:ꢀ(0"-  
%":  
%"5&  
%*45"/$& $"-03*&4  
5*.&  
$0..&/54  
46/%":  
KEEPING AN ExERCISE DIARY  
.0/%":  
To make your personal exercise log book, photocopy the weekly and monthly log sheets, which are located  
on the following pages, or you can print them off of your computer by going to:  
56&4%":  
8&%/&4%":  
5)634%":  
'3*%":  
4"563%":  
8&&,-:ꢀ505"-4ꢀꢂ  
As your fitness improves, you can look back and see how far you’ve come!  
ꢀꢅ  
ꢀ9  
E900_E1200_Rev.2.7.indd 38-39  
6/16/08 9:46:48 AM  
WEEKLY LOG SHEETS  
MONTHLY LOG SHEETS  
8&&,ꢀꢁ  
%":  
46/%":  
8&&,-:ꢀ(0"-  
.0/5)  
.0/5)-:ꢀ(0"-  
$"-03*&4  
%"5&  
%*45"/$& $"-03*&4  
5*.&  
$0..&/54  
8&&,ꢀꢂ  
%*45"/$&  
%*45"/$&  
%*45"/$&  
5*.&  
5*.&  
5*.&  
.0/%":  
56&4%":  
8&%/&4%":  
5)634%":  
'3*%":  
4"563%":  
8&&,-:ꢀ505"-4ꢀꢂ  
.0/5)-:ꢀ505"-4ꢀꢁ  
.0/5)  
8&&,ꢀꢂ  
.0/5)-:ꢀ(0"-  
$"-03*&4  
8&&,ꢀꢁ  
%":  
46/%":  
8&&,-:ꢀ(0"-  
%"5&  
%*45"/$& $"-03*&4  
5*.&  
$0..&/54  
.0/%":  
56&4%":  
8&%/&4%":  
5)634%":  
'3*%":  
4"563%":  
.0/5)-:ꢀ505"-4ꢀꢁ  
8&&,-:ꢀ505"-4ꢀꢂ  
8&&,ꢀꢁ  
%":  
46/%":  
8&&,-:ꢀ(0"-  
.0/5)  
8&&,ꢀꢂ  
.0/5)-:ꢀ(0"-  
$"-03*&4  
%"5&  
%*45"/$& $"-03*&4  
5*.&  
$0..&/54  
.0/%":  
56&4%":  
8&%/&4%":  
5)634%":  
'3*%":  
4"563%":  
8&&,-:ꢀ505"-4ꢀꢂ  
.0/5)-:ꢀ505"-4ꢀꢁ  
ꢁ0  
ꢁ1  
E900_E1200_Rev.2.7.indd 40-41  
6/16/08 9:46:50 AM  
TROUBLESHOOTING  
HEART RATE TROUBLESHOOTING  
Your Horizon Fitness elliptical is designed to be reliable. However, if you do experience problems with your  
elliptical, please reference the troubleshooting guide listed below.  
PROBLEM: There is no heart rate reading.  
SOLUTION: Remove the console and verify that the heart rate cables are attached properly, making  
sure that the cables are securely inserted into the console.  
PROBLEM: The console does not light up.  
SOLUTION: Verify the following:  
YOU MAY ExPERIENCE AN ERRATIC READOUT UNDER THE FOLLOWING CONDITIONS:  
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the  
heart rate handlebars.  
• The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.  
• The correct power cord is being used. Only use the power cord provided or authorized by Horizon Fitness.  
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.  
• The power switch is turned to the ON position (may not apply to all models).  
• Turn off the machine and unplug power cord. Remove the console and check that all connections to the console  
are secure and not damaged or pinched.  
• Constant movement and vibration due to constantly holding the heart rate grips while exercising.  
• When you are breathing heavily during a workout.  
• When your hands are constricted by wearing a ring.  
NOTE: If your console uses batteries, they may need to be replaced.  
• When your hands are dry or cold. Try moistening your palms or rubbing them together to warm.  
• Anyone with heavy arrhythmia.  
• Anyone with arteriosclerosis or peripheral circulation disorder.  
• Anyone whose skin on the measuring palms is especially thick.  
PROBLEM: The console lights up but the Time/RPM’s do not count.  
SOLUTION: Verify the following:  
• Turn off machine and unplug power cord. Remove the console and check that all connections to the console are  
secure and not damaged or pinched.  
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or  
damaged.  
NOTE: Outside interference sources such as computers, motors and fluorescent lights may cause the heart  
rate reading to be erratic. Check your exercise environment for sources of interference such as high power lines,  
large motors, etc.  
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.  
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.  
SOLUTION: Verify the following:  
• The correct power cord is being used. Only use the power cord provided or authorized by Horizon Fitness.  
• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.  
CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL  
WHEN YOU ARE NEAR THE EQUIPMENT.  
PROBLEM: The roller wheels appear to be leaving particles on the guide rails.  
SOLUTION: This is considered normal wear of the elliptical wheels.  
The following information may be asked of you when you call. Please have these items readily available:  
• Model Name  
To remove, simply wipe off the roller wheels and guide rails with a damp cloth.  
• Serial Number  
• Date of Purchase (receipt or credit card statement)  
PROBLEM: The elliptical makes a squeaking or chirping noise.  
SOLUTION: Verify the following:  
In order for Customer Tech Support to service your elliptical they may need to ask detailed questions about the  
symptoms that are occurring. Some troubleshooting questions that may be asked are:  
• The elliptical is on a level surface.  
• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.  
• How long has this problem been occurring?  
• Does this problem occur with every use? With every user?  
PROBLEM: When MP3 player is connected there is no sound coming from the speakers or the speakers sound fuzzy.  
• If you are hearing a noise, does it come from the front, back or inside? What kind of noise is it (thumping,  
grinding, squeaking, chirping etc.)?  
SOLUTION: Verify the following:  
• Make sure audio cable is plugged in securely to both the console and MP3 Player jacks.  
• If you are having a resistance problem what is occurring? Is the resistance always too hard or too easy?  
Does the resistance respond when pushing the buttons on the console? Does the resistance constantly cycle  
through the levels during the workout?  
• Has the machine been maintained per the maintenance schedule?  
• Does the problem occur when using the handlebars? Without using the handlebars?  
PROBLEM: iPod® is not charging from the docking station and/or does not respond to console controls.  
SOLUTION: Verify the following:  
• Make sure you are using the proper size iPod® insert.  
• Make sure the iPod® dock connector is securely plugged into the connector pin on the elliptical.  
Answering these and other questions will give the technicians the ability to send proper replacement parts and  
the service necessary to get you and your Horizon Fitness elliptical running again!  
ꢁ2  
ꢁꢀ  
E900_E1200_Rev.2.7.indd 42-43  
6/16/08 9:46:50 AM  
MAINTENANCE  
COMMON PRODUCT QUESTIONS  
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?  
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important  
maintenance steps are to wipe perspiration off the unit after each use and periodically checking the  
assembly bolts for tightness.  
ARE THE SOUNDS MY ELLIPTICAL MAKES NORMAL?  
Our ellipticals are some of the quietest available because they use belt drives and friction free magnetic  
resistance. We use the highest grade bearings and belts to minimize noise. However, because the resistance  
system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder  
technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our ellipticals.  
These mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer  
of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts  
will generate some noise which will transmit through the casing and frame. It is also normal for these  
sounds to change slightly during a workout and over time because of thermal expansion of the parts.  
HOW DO I CLEAN MY ELLIPTICAL?  
Clean with soap and water cleaners only. Never use solvents on plastic parts.  
Cleanliness of your elliptical and its operating environment will keep maintenance problems  
and service calls to a minimum. For this reason, Horizon Fitness recommends that the following  
preventive maintenance schedule be followed.  
WHY IS THE ELLIPTICAL I HAD DELIVERED LOUDER THAN THE ONE AT THE STORE?  
All fitness products seem quieter in a large store showroom because there is generally more background  
noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood  
overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness  
product is placed close to a wall, there will be more reflected noise.  
AFTER EACH USE (DAILY)  
Turn off the elliptical by unplugging the power cord from the wall outlet  
• Wipe down the elliptical with a damp cloth. Never use solvents, as they can cause damage to the  
elliptical.  
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.  
• Make sure the power cord is not underneath the elliptical or in any other area where it can become  
pinched or cut.  
HOW LONG WILL THE DRIVE BELT LAST?  
The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are  
now commonly used in far more demanding applications such as motorcycle drives.  
To remove power from the elliptical, the power cord must be disconnected from  
the wall outlet.  
CAN I MOVE THE TRAINER EASILY ONCE IT IS ASSEMBLED?  
WARNING  
Your elliptical has a pair of transport wheels built into the front legs. It is easy to move your elliptical by  
rolling it on the front transport wheels. It is important that you place your elliptical in a comfortable and  
inviting room. Your elliptical is designed to use minimal floor space. Many people will place their ellipticals  
facing the TV or a picture window. If at all possible, avoid putting your elliptical in a unfinished basement.  
To make exercise a desirable daily activity for you, the elliptical should be in a comfortable setting.  
WEEKLY  
Clean underneath the elliptical, following these steps:  
• Turn off the elliptical  
• Move the elliptical to a remote location.  
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the  
elliptical.  
CAN I PEDAL BACKWARDS ON MY ELLIPTICAL?  
Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider range  
of muscles.  
• Return the elliptical to its previous position.  
EVERY MONTH  
• Inspect all assembly bolts and pedals on the machine for proper tightness.  
• Clean any debris off of the pedal arm wheels and guide rails.  
ꢁꢁ  
ꢁꢂ  
E900_E1200_Rev.2.7.indd 44-45  
6/16/08 9:46:51 AM  
LIMITED HOME-USE WARRANTY  
ExCLUSIONS AND LIMITATIONS  
Weight Capacity = ꢀ00 lbs  
Who is covered:  
FRAME • LIFETIME  
• The original owner and is not transferable.  
Horizon Fitness warrants the frame  
against defects in workmanship  
and materials for the lifetime of the  
original owner. (The frame is defined  
as the welded metal base of the unit  
and does not include any parts that  
can be removed.)  
What IS covered:  
• Repair or replacement of a defective motor, electronic component, or defective  
part and is the sole remedy of the warranty.  
What IS NOT covered:  
• Normal wear and tear, improper assembly or maintenance, or installation of  
parts or accessories not originally intended or compatible with the equipment  
as sold.  
• Damage or failure due to accident, abuse, corrosion, discoloration of paint  
or plastic, neglect, theft, vandalism, fire, flood, wind, lightning, freezing, or  
other natural disasters of any kind, power reduction, fluctuation or failure from  
whatever cause, unusual atmospheric conditions, collision, introduction of  
foreign objects into the covered unit, or modifications that are unauthorized or  
not recommended by Horizon Fitness.  
• Incidental or consequential damages. Horizon Fitness is not responsible or  
liable for indirect, special or consequential damages, including damage  
incurred during a move, economic loss, loss of property, or profits, loss of  
enjoyment or use, or other consequential damages of whatsoever nature in  
connection with the purchase, use, repair or maintenance of the product.  
• Equipment used for commercial purposes or any use other than a single family  
or Household, unless endorsed by Horizon Fitness for coverage.  
• Equipment owner or operated outside the US and Canada.  
• Delivery, assembly, installation, setup for original or replacement units or labor  
or other costs associated with removal or replacement of the covered unit.  
• Any attempt to repair this equipment creates a risk of injury. Horizon Fitness  
is not responsible or liable for any damage, loss or liability arising from any  
personal injury incurred during the course of, or as a result of any repair  
or attempted repair of your fitness equipment by other than an authorized  
service technician. All repairs attempted by you on your fitness equipment are  
undertaken AT YOUR OWN RISK and Horizon Fitness shall have no liability for  
any injury to the person or property arising from such repairs.  
BRAKE • LIFETIME  
Horizon Fitness warrants the brake  
against defects in workmanship and  
materials for the lifetime of the unit  
from the date of original purchase,  
so long as the device remains in the  
possession of the original owner.  
ELECTRONICS & PARTS • 2 YEARS  
Horizon Fitness warrants the  
electronic components and all  
original parts for a period of two  
years and the incline motor for a  
period of one year from the date of  
original purchase, so long as the  
device remains in the possession of  
the original owner.  
INCLINE MOTOR • 1 YEAR  
Horizon Fitness warrants the incline  
motoragainstdefectsinworkmanship  
and materials for 1 year from the  
date of original purchase, so long as  
the device remains in the possession  
of the original owner.  
SERVICE/RETURNS  
• In-home service is available within 150 miles of the nearest authorized repair  
center (Mileage beyond 150 miles from an authorized service center is the  
responsibility of the consumer).  
• All returns must be pre-authorized by Horizon Fitness.  
• Horizon Fitness’ obligation under this warranty is limited to replacing or  
repairing, at Horizon Fitness’ option, the same or comparable model at one of its  
authorized service centers.  
• A Horizon Fitness authorized service center must receive all equipment for which  
a warranty claim is made. This equipment must be received with all freight  
and other transportation charges prepaid, accompanied by sufficient proof of  
purchase.  
• Replacement units, parts and electronic components reconditioned to As-new  
Condition by Horizon Fitness or its vendors may sometimes be supplied as  
warranty replacement and constitute fulfillment of warranty terms.  
• This warranty gives you specific legal rights, and your rights may vary from state  
to state.  
LABOR • 1 YEAR  
Horizon Fitness shall cover the labor  
cost for the repair of the device for a  
period of one year from the date of  
the original purchase, so long as the  
device remains in the possession of  
the original owner.  
ꢁꢃ  
E900_E1200_Rev.2.7.indd 46-47  
6/16/08 9:46:51 AM  

Black Decker BLM7600G User Manual
Bryan Boilers DSH 25 User Manual
Bryan Boilers EB 75 S150 FDG User Manual
Burnham Independence IN4 User Manual
Bushnell Binoculars 110834 User Manual
Canon Powershot Elph 110 Hs Compact Camera 6039B001 User Manual
FujiFilm Camera Lens DV10X7B 2 User Manual
Jensen Car Speaker JRX240 User Manual
Jensen vm9311ts User Manual
JVC Camcorder GZ MG27U User Manual