For Your Safety
Instruction Manual
8mm Video Camcorder
VM-E110A/310A
Hitachi Home Electronics (America),
HITACHI (HSC) CANADA, INC.
Inc.
3300 Trans Canada Highway, Pointe
Claire,
3890 Steve Reynolds Blvd., Norcross, GA 30093
Tel. 404-279-5600
Quebec, H9R1B1, CANADA
Tel. 514-697-9150
HITACHI SALES CORPORATION OF
HAWAII, INC
3219 Koapaka Street, Honolulu, Hawaii 96819
Tel. 808-836-3621
Thank you for buying a Hitachi product. You've chosen the best 8 mm video camcorder
for you, and we want to help you make the most of your purchase. Please take time to
become familiar with the manual and how it is set up. Keep it handy for feature
reference.
QR12521 © Hitachi, Ltd. 1995
Printed in Japan KG-M(N)
1
For Your Safety
Connecting to a Television without Audio In and Video In Jacks ...............................................39
Simple Playback (Using the Electronic Viewfinder)......................................................................40
Using Still.............................................................................................................................................40
Using Forward and Reverse Search ...............................................................................................40
Advanced Techniques ...............................................................................................................................42
Using the Power Zoom ......................................................................................................................42
Using the Digital Zoom ......................................................................................................................42
Using the INST. ZOOM (Instant Zoom) Button..............................................................................43
Using Auto Focus ...............................................................................................................................43
Using Manual Focus ..........................................................................................................................44
Using Instant Review .........................................................................................................................45
Using Quick Edit .................................................................................................................................45
Using Macro ........................................................................................................................................46
Creating and Recording A Title (The remote control is optional for VM-E110A) .....................46
Creating a Title....................................................................................................................................47
Correcting Errors ................................................................................................................................47
Recording Title on a Tape in the Camcorder.................................................................................48
Recording a Created Title while Transferring a Tape...................................................................48
Using the Wireless Remote Control (The remote control is optional for VM-E110A)..............48
How to attach remote control to the shoulder strap (The remote control is optional for VM-
E110A) .................................................................................................................................................49
To remove the remote control ..........................................................................................................49
Dubbing from the camcorder to a VCR...........................................................................................49
Using Synchro Edit (The remote control is optional for VM-E110A)..........................................50
Using Audio/Video Dubbing (The remote control is optional for VM-E110A)...........................51
Recording Television Programs.......................................................................................................51
General Maintenance.................................................................................................................................53
Cleaning the camcorder Heads........................................................................................................53
Cleaning the Lens and Picture Tube of the Electronic Viewfinder .............................................53
Periodic Maintenance ........................................................................................................................53
Troubleshooting..................................................................................................................................54
Specifications ............................................................................................................................................55
Accessories Add Excitement.....................................................................................................................56
To Order in the United States...........................................................................................................57
HITACHI WARRANTY CARD (USA Front).........................................................................................58
HITACHI WARRANTY CARD (USA Back) .........................................................................................60
HITACHI WARRANTY CARD (Front) CANADA ONLY....................................................................61
HITACHI CANADA WARRANTY CARD (Back) ................................................................................62
3
For Your Safety
For Your Safety
1The CAM/OFF/VIDEO switch turns the camcorder on and off, leaving the date/time feature
unaffected. If the unit is to be left unattended for a long period of time, turn the camcorder off
and attach the lens cap.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
The camcorder has the following caution marks.
Identifications of caution marks
This symbol warns the user that uninsulated voltage within the unit may have
sufficient magnitude to cause electrical shock. Therefore, it is dangerous to make any kind
of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and
maintenance of this unit has been included. Therefore, it should be read carefully to avoid
any problems.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING TO PREVENT FIRE OR ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, AND FULLY INSERT PLUG.
WARNING: Many television programs and films are copyrighted. In certain circumstances,
copyright law may apply to private in-home videotaping of copyrighted materials.
"This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus as set out in the interference-causing equipment standard entitled
"Digital Apparatus", ICES-003 of the Department of Communications."
The liquid crystal display (LCD) panel is made by highly precise technology. More than
99.99% of its picture elements (pixels) are effective, but some (less than 0.01%) may
appear as colored bright dots. This does not indicate a fault as the LCD panel stretches
4
For Your Safety
the limits of current technology (only for VM-E310A).
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits of Class B digital
device, pursuant of Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Caution to the user: Changes or modifications not expressly approved by the manufacture
could void the user's authority to operate the equipment.
"Note to CATV system installer: This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical".
Notes:
This unit uses 8mm video format cassettes.
It records and plays back in the SP mode (14.3 mm/sec).
It cannot record and play back in the LP mode (7.2 mm/sec).
5
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of
your video product, safety is a major factor in the design of every instrument. But,
safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper
use of a Video Cassette Recorder and accessory equipment. Please read it carefully
before operating your video product and keep it in a handy place for future reference.
INSTALLATION
1 Read and Follow Instructions -- All the safety and operating instructions should be
read before the video product is operated. Follow all operating and use instructions.
2 Retain Instruction -- The safety and operating instructions should be retained for
future reference.
3 Heed Warnings -- Comply with all warnings on the video product and in the
operating instructions.
4 Polarized Plug -- This video product is equipped with a polarized alternating-current
line plug (a plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. To prevent electric shock do not use this
polarized plug with an extension cord, receptacle or other outlet unless the blades can
be fully inserted without blade exposure. If you need an extension, use a polarized
cord.
5 Power Sources -- This video product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your video dealer or local power company. For video products
intended to operate from battery power, or other sources, refer to the operating
instructions.
6 Overloading -- Do not overload wall outlets and extension cords as this can result in
a risk of fire or electric shock. Overloaded AC outlets and extension cords are
dangerous, and so are frayed power cords, damaged or cracked wire insulation and
broken plugs. They may result in shock or fire hazard. Periodically examine the cord
and have it replaced by your service technician if appearance indicates damage or
deteriorated insulation.
6
IMPORTANT SAFEGUARDS
7 Power Cord Protection -- Power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
8 Ventilation -- Slots and openings in the cabinet are provided for ventilation to ensure
reliable operation of the video product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by
placing the video product on a bed, sofa, rug or other similar surface. This video
product should never be placed near or over a radiator or heat register. This video
product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the video product manufacturer's instructions have
been followed.
9 Attachments -- Do not use attachments unless recommended by the video product
manufacturer as they may cause hazards.
Caution: Maintain electrical safety. Power-line operated equipment or accessories
connected to this unit should bear the UL listing mark or CSA certification mark on the
accessory itself and should not have been modified so as to defeat the safety features.
This will help avoid any potential hazard from electric shock or fire. If in doubt, contact
qualified service personnel.
10 Water and Moisture -- Do not use this video product near water -- for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
11 Accessories -- Do not place this video product on an unstable card, stand, tripod,
bracket or table. The video product may fall, causing serious injury to a child or adult,
and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or
table recommended by the manufacturer, or sold with the video product. Any mounting
of the product should follow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
11A An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart combination to
overturn.
7
IMPORTANT SAFEGUARDS
12 Outdoor Antenna Grounding -- If an outside antenna or cable system is
connected to the video product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with
respect to proper grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode. See example below:
EXAMPLE OF ANTENNA GROUNDING
13 Power Lines -- An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching or approaching such power lines or circuits as
contact with them might be fatal. Installing an outdoor antenna can be hazardous and
should be left to a professional antenna installer.
USE
14 Cleaning -- Unplug this video product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15 Object and Liquid Entry -- Never push objects of any kind into this video product
through openings as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the video
product.
16 Lightning -- For added protection for this video product during a lightning storm, or
when it its left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable-system. This will prevent damage to the
video product due to lightning and power-line surges.
8
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER
SERVICE
17 Servicing -- Do not attempt to service this video product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18 Conditions Requiring Service -- Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under the following conditions.
a. When the power-supply cord or plug is damaged
b. If liquid has been spilled or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the video product to its normal operation.
e. If the video product has been dropped or the cabinet has been damaged.
f. When the video product exhibits a distinct change in performance -- this indicates a
need for service.
19 Replacement Parts -- When replacement parts are required, have the service
technician verify that the replacements he uses have the same safety characteristics as
the original parts. Use of replacements specified by the video product manufacturer can
prevent fire, electric shock or other hazards
20 Safety Check -- Upon completion of any service or repairs to this video product, ask
the service technician to perform safety checks recommended by the manufacturer to
determine that the video product is in safe operating condition.
21 Heat -- The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER
1. Save these Instructions -- This page contains important safety and operating
instructions for AC Adapter/Charger Model VM-AC 84A.
2. Before using AC Adapter/Charger, read all instructions and cautionary markings on
(1) AC Adapter/Charger, (2) battery and (3) product using battery.
9
IMPORTANT SAFETY INSTRUCTIONS FOR AC ADAPTER/CHARGER
3. Also read all instructions on pages 4 and 5.
4. Caution -- To reduce risk of injury, charge only rechargeable battery, VM-BP82G, VM-
BP82 or VM-BP84.
5. Do not expose charger to rain or snow.
6. Use of an attachment nor recommended or sold by the battery charger manufacturer
may result in a risk of fire, electric shock, or injury to persons.
7. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when
disconnecting charger.
8. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
9. Do not operate charger with damaged cord or plug -- replace them immediately.
10. An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
A. The pins on plug of extension cord are the same number, size, and shape as those
of plug on charger.
B. That extension cord is properly wired and in good electrical condition; and
C. That wire size should be met below:
Minimum
AWG size
18
16
Length of extension cord (feet)
Equal to or less than 100
Equal to or less than 150
11. Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way; take it to a qualified serviceman.
12. Do not disassemble charger: take it to a qualified serviceman when service or repair
is required. Incorrect reassembly may result in a risk of electric shock or fire.
13. To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
10
Read This First
Read This First
To guide you, we've included
A "Before You Begin" section containing important cautions for your family's safety as
well as instruction for getting your video camcorder ready for use. Please read and
understand this section thoroughly before moving on.
A "Getting Started" section to familiarize yourself with the controls and prepare you
for recording.
A "Basic Techniques" section to allow you to use your video camcorder quickly and
confidently before advancing to the more sophisticated features of the Hitachi VM-
E110A/E310A.
"Advanced Techniques" to help you with some of the exciting, sophisticated features
of the Hitachi VM-E110A/E310A. We hope you will take the time to learn about these
functions since they have been designed for you. You can use the video camcorder
without reading this section.
A "General Maintenance" section to help keep your purchase in good repair.
We want this manual to be as helpful as possible, so it includes two easy ways to find
the information you need:
A quick index for the information you use most often (this page).
A detailed table of contents directing you to specific information quickly (page 10).
Get to know your video camcorder by using this manual, and get to know Hitachi. We
appreciate your business.
Quick Index
Charging the Battery.....12
Making a Basic Recording.....29
Playing Back Your Recording.....30
Using Power Zoom.....35
Using Digital Zoom.....35
Using the Wireless Remote Control.....42
Dubbing from camcorder to VCR.....43
Before You Begin
Any problems that occur as a result of any of the following conditions will not be covered
by our warranty.
Be careful that no water, dust or sand enters the camcorder.
When you shoot at a scene which contains an extremely bright object such as the sun
or a light source, a bright vertical bar may appear in the picture.
Your camcorder is functioning properly, but the solid-state pickup device (C.C.D.)
11
Before You Begin
usually causes this as an inherent characteristic. Try to avoid shooting an excessive
bright object directly.
Be sure not to leave it in a place where the temperature exceeds 120° (49°C), or the
pickup device may be damaged.
Dangerous includes:
Inside a car with the windows closed and in direct sunshine.
Near heating appliances.
Do not leave the viewfinder lens facing sunlight for a prolonged period, or the
phosphorescent surface of the cathode ray tube or the liquid crystal display (LCD) panel
may be damaged.
Features
Easy to use
24x zoom ratio
Instant zoom
Recorded date search
Automatic title recording
Difference between Models VM-E110A/E310A
This instruction manual shows the illustrations for the VM-E310A.
Components and Accessories
Check that you have all the following components and accessories before preceding.
1. Audio/Video output cable
2. Battery pack
3. AC adapter/charger
12
Before You Begin
4. Batteries for date/title and remote control
5. Shoulder strap
6. DC cord
7. Remote control
8. Remote control holder
13
Before You Begin
Optional RF Adapter
If you wish to connect this camcorder to a television that does not have audio/video
input jacks you will need to use the optional RF adapter model VM-RF86A.
The RF adapter can be purchased by calling the telephone number below. For your
convenience Visa, Master Card, and American Express credit cards are accepted. The
RF adapter can also be purchased by mail by sending either cheque, money order or
your credit card information to the following address:
IN U.S.A.
Hitachi Home Electronics (America), Inc.
Parts Division 401 West Atresia Blvd.
Compton, California. U.S.A. 90220
Tel: 1-800-HITACHI (1-800-448-2244)
For more information concerning the purchase of camcorder accessories, please see
the optional accessory listing on page 55. 2ACTUAL LIST STARTS ON PAGE 51
MOISTURE
Avoid operating your camcorder immediately after moving it from a cold place to a
warm, humid place. Give the camcorder 2 to 3 hours to stabilize in the ambient
conditions of the surroundings before inserting a cassette. When moved from a cold
place to a warm, humid place, moisture may condense on the head drum inside the
machine. This moisture could cause the tape to stick to the headwheel and damage the
headwheel or tape.
When a small amount of moisture is sensed, "TAPE" flashes in the viewfinder. Remove
the cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour.
Attaching the Shoulder Strap (The shoulder strap is not supplied with VM-E110A)
Thread the ends of the provided shoulder strap through the slots at the back of the
camcorder and thread through the shoulder straps' buckles. Please ensure that the
straps are securely fastened before using the shoulder strap to carry the camcorder.
14
Getting Started
Viewfinder Bright, Color and Tint Control (only for VM-E310A)
This small "BRIGHT", "COLOR" and "TINT" controls are set at the factory and should
require no adjustment. If they ever require adjustment, use a plastic screwdriver. Make
the adjustments with caution to prevent damaging the miniature controls.
Getting Started
This section guides you through the initial preparation of the camcorder. None of these
processes are complex. Set aside some time, relax, and familiarize yourself with this
quality instrument.
Enjoy getting to know all about your Hitachi 8mm camcorder. The more comfortable and
familiar you are with the machine and its features, the more you can make it do for you.
Let's get started!
It is crucial that you read and understand all the safety instructions before you begin. If
you haven't read the safety instructions yet, please take the time to do so now.
Charging the Battery
3The first step is to set the battery to charge. It takes approximately an hour (VM-BP82 and
VM-BP82G), enough time to familiarize yourself with some of the basic features of the
camcorder. Once charged the battery will give you approximately 60 ~ 70 minutes of operating
time depending on the use of Zoom and start/stop.
Charge the battery at a temperature range of 50°F(10°C) - 86°F (30°C) to prevent damage to
the battery.
1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide blade
fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the blades fully
into the outlet either contact an electrician to replace your obsolete outlet, or use a polarized
cord or outlet accessory.
2. To insert the battery into the charger align the reference arrow on the battery with the
reference arrow on the AC adapter/charger. Push the battery till it is flush with the AC
adapter/charger sliding it in the direction of the arrow as shown in the figure.
3. The CHARGE light remains on while the battery charges, turning off when charging
15
Getting Started
completes.
Note: Remove the DC cord from the AC adapter/charger before attempting to charge the
battery. The CHARGE light flashes if the DC cord remains connected while you attempt to
charge the battery.
Note: Do not operate the battery at temperature below 14°F (-10°C) or above 95°F (35°C).
At extremely low temperatures operation time decreases, while at high temperature the
battery may be damaged.
After charging set the mark switch to red so that you may quickly identify
whether the battery is charged or uncharged.
Note: The marker switch does not guarantee the batteries charge status.
Additional Information
To use a battery in optimum condition:
Use the battery until the low charge light ( ) flashes. Using a battery for a short time
and then recharging it may shorten the operation time.
It is recommended to refresh a battery before recharging it when it has not been used
for long time; otherwise its operation time becomes short. Press the refresh button.
After refreshing is complete, the REFRESH light turns off and the CHARGE light turns
on and charging begins automatically.
Refreshing a fully charged battery takes approximately 4 hours (VM-BP82G), adding
considerable time to battery charging.
With repeated normal charging and use the battery will gradually lose operating time.
When operation time becomes too short to be useful, replace the battery.
If the POWER light begins to flash during charging, remove the battery and then
reattach it to the AC charger/adapter. If the POWER light continues to flash after several
16
Getting Started
attempts to attach it, the battery is unable to take a charge and must be replaced.
Do not attach a hot battery to the AC adapter/charger. Allow it to cool. Attaching a hot
battery to the AC adapter/charger causes the POWER light to flash.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE THE BATTERY OR AC
ADAPTER/CHARGER.
THROWING THE BATTERY INTO FIRE OR EXPOSING IT TO EXCESSIVE HEAT
(ABOVE 149°F (65°C)) MAY CAUSE INJURY.
SHORTING THE BATTERY'S TERMINAL INCREASES RISK OF FIRE OR
ELECTRICAL SHOCK.
ATTENTION:
The product that you have purchased contains a rechargeable battery. The battery is
recyclable. At the end of its useful life, under various state and local laws, it may be illegal
to dispose of this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.
Adjusting the Electronic Viewfinder
The electronic viewfinder adjusts simply by pivoting it to a position where it is
comfortable and easy to see through. Place the viewfinder back in its original position
before storing the camcorder in its case or carrying the camera recorder around to avoid
damaging the viewfinder or camcorder.
17
Getting Started
Eyepiece Adjustment
To use the electronic viewfinder, turn this control for your optimum focus adjustment.
Attaching the Optional Wide or Tele Converter Lens
1. To remove the lens hood, turn it counterclockwise.
2. Remove both caps of the converter lens.
3. Screw the lens into the threads on the camcorder lens assembly.
18
Getting Started
Loading Batteries
Install the batteries to prevent misplacing them.
Date/Title Battery
1. Pull out the battery holder.
2. Insert the date/title battery with the "+" terminal facing up.
3. Fully insert the battery holder into the camcorder.
Remote Control Battery
(The remote control and the battery are optional for VM-E110A)
1. Push the tab to the left of the remote control and hold it, then remove the battery
holder.
2. Insert the battery with the "+" terminal facing up as shown in the figure above.
3. Replace the battery holder with battery in the remote control making sure that it is full
inserted.
WARNING: KEEP THE BATTERIES AWAY FROM CHILDREN AND PETS.
IF SWALLOWED CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY
TREATMENT.
19
Getting Started
Note: Replace the batteries with 3V micro lithium cells such as Maxwell CR2025 or its
equivalent.
Note: Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
Note: Do not short circuit the batteries.
Note: Do not take apart the batteries.
Note: Do not hold the batteries with the metallic tweezers.
Note: Do not re-charge the batteries.
Note: Keep the batteries in a dark, cool, dry place.
Camcorder Batteries
4Using Battery Pack
Before you install the battery for the first time it must be fully charged. Refer to "Charging the
Battery" for details.
1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.
2. Insert the battery into the attachment holder, aligning it with the "( )" mark on the
camcorder.
3. Press the center of the battery and hold it, then slide it in the direction of the arrow.
4. After installing the battery, close the cover. Hold the OPEN lever and align the tabs on both
sides of the cover with the end of the attachment holder.
Note: If the OPEN lever is flat, the cover will not close.
20
Getting Started
Note: Always remove the battery from the camcorder after use.
Note: We cannot guarantee against malfunctions of the camcorder which occur when you
use battery packs made by manufacturers other than Hitachi.
Removing the Battery Pack
1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.
2. Push the side of the battery in the direction of the arrow. A click will be heard and the
battery is released.
3. Remove the battery and close the cover.
Checking the Battery's Charge
A battery charge indicator is located on the upper right corner of the viewfinder. One of
three symbols displays when the battery is used.
21
Getting Started
This symbol indicates a fully charged battery.
This symbol indicates a partially charged battery.
This flashing symbol indicates a battery nearly out of power. Use an alternate
power source or charge the battery before continuing to use the camcorder.
Using Alkaline Dry-Cell Batteries
The camcorder can be powered by six alkaline dry-cell batteries inserted into the power
supply attachment holder. The continuous operation time of the camcorder depends on
the type of alkaline batteries used. Please ensure that CAM/OFF/VIDEO switch is in the
OFF position whenever attaching or detaching any power supply (i.e. Battery, AC
adapter/charger, etc.)
1. Lift the OPEN lever and pull it up. The power supply attachment cover will open.
2. Lift the battery holder plates at the center of the attachment holder.
3. Insert six alkaline batteries with the correct polarities.
4. After installing the batteries, close the cover. Hold the OPEN lever and align the tabs
on both sides of the cover with the end of the attachment holder.
22
Getting Started
5Note: Use only "AA" alkaline batteries marked "LR6". (Manganese batteries cannot be used
to power the camcorder.)
Note: It is recommended that you use alkaline batteries within the recommended period of use
or within two years of the date of manufacture.
Note: Be careful of the following to prevent the leakage of liquid or an explosion.
Check that the orientation (polarity), of the batteries is correct.
Remove the batteries when not using the camcorder.
Remove the used batteries from the camcorder.
Do not use batteries made by different manufacturers at the same time.
Do not use old and new batteries at the same time.
Note: If the liquid leaks, remove the batteries immediately and ask your nearest dealer to
inspect the camcorder (this will be at your own expense).
Note: Do not let the batteries or the terminals of the camcorder get dirty. If they are dirty, use a
dry cloth to wipe off the dirt completely.
Note: It is recommended that you use a battery pack to power the camcorder when using a
DC camera light. If a camera light is used when the camcorder is powered by batteries, the
required supply voltage will be very short and the camcorder will turn off soon.
Note: When the batteries are used to power the camcorder in a cold place, it may not operate
normally; the operation time may become extremely short or the camcorder may not be turned
on. It is recommended that you use a battery pack to power the camcorder in a cord place. (At
10°C, the chemical reaction decreases the capacity of battery to one-tenth when compared to
that at normal temperature 20°C.)
Note: Noise may appear momentarily in the viewfinder when recording is started or stopped.
Note: Be careful when touching the batteries with your bare hand to remove them as they are
warm during and just after use.
Note: Since the supply voltage from batteries decreases more abruptly when compared to that
from a battery pack, the battery remaining level indicator ( ) may not flash in the viewfinder,
noise may occur, the picture and sound may not be recorded normally and/or the power may
be turned off soon. These phenomena occur because the capacity of batteries becomes low.
So turn the power switch off and replace the batteries. If the power switch is left turned on in
this state, the power may turn on temporarily and turn off again repeatedly.
Note: Be sure not to short, disassemble, heat or throw batteries into fire. This is very
dangerous.
23
Getting Started
Using Alternative Power Sources
Using the AC Adapter/Charger
6Please ensure that the CAM/OFF/VIDEO switch is in the OFF position whenever attaching or
detaching any power supply (ie. battery, AC adapter/charger, etc.)
1. Plug the AC adapter/charger power cord into an AC outlet. Make sure that the wide blade
fits into the wide slot. If it doesn't fit try reversing it. If you still cannot make fit the blades fully
into the outlet either contact an electrician to replace your obsolete outlet, or use a polarized
cord or outlet accessory.
2. Connect one end of the DC cord (provided) to the DC IN jack of the camcorder. Connect the
other end of the DC cord to the DC OUTPUT of the AC adapter/charger.
Note: The AC adapter/charger can be used around the world. An AC plug adapter is
required in some foreign countries. If you need one purchase it at your Hitachi distributor.
Note: The battery level indicator sometimes displays partial charge symbol when using the
AC adaptor/charger. Ignore this indicator when using the AC adaptor/charger.
Using a Car Battery
The camcorder can be powered with a car battery by using an optional car battery cord
(Hitachi VM-CC80A) to plug the camcorder into the car's cigarette lighter socket. Please
ensure that the CAM/OFF/VIDEO switch is in the OFF position whenever attaching or
detaching any power supply (ie. battery, AC adapter/charger, etc).
1. Plug the car battery cord into the car's cigarette lighter socket.
2. Connect one end of the DC cord (provided) to the DC IN jack of the camcorder.
Connect to other end of the DC cord to the DC OUTPUT of the car battery cord.
24
Getting Started
Note: Only use the car battery cord with cars having 12/24 volt negative ground system.
Inserting and Removing Cassettes
A power source must be connected before inserting or removing cassettes. Once
connected cassettes can be inserted or removed whether the CAM/OFF/VIDEO switch
is on or off.
Inserting a Cassette
1. Slide the EJECT switch in the direction of the arrow. The cassette door opens
automatically.
2. Place the cassette in the cassette holder so that the transparent window faces away
from the body of the camcorder and the sprockets toward the body of the camcorder.
3. Push the cassette holder, which is embossed PUSH LOCK on the left hand side, until
it "clicks" into place. The camcorder automatically closes.
Caution: Be sure that you push the cassette holder embossed PUSH LOCK to close the
holder. Otherwise, the holder will not click into place and the tape may be slack which could
lead to damage.
Note: If TAPE flashes in the viewfinder, remove the cassette and check that the tape is not
damaged, is not slack or no dust adheres to it, etc. After making sure that there is no
abnormality, reinsert the cassette. If TAPE reappears, see "Troubleshooting" on page 47.
Removing a Cassette
25
Getting Started
Slide the EJECT switch in the direction of the arrow. The cassette door opens
automatically. Remove the cassette.
Protecting Recorded Material
Protect 8mm cassettes from accidental erasure by sliding the tab on the side of the
cassette towards the opposite side until the tab is completely visible. Slide the tab in the
opposite direction, until the tab disappears, to record on the cassette again.
Attaching the Optional DC Camera Light
You can use the DC camera light to light subjects in darkened areas or correct
unflattering shadows. Use the camera light wisely as it greatly reduces the time you
may use a charged battery.
NEVER TOUCH THE DC CAMERA
LIGHT TERMINAL WHEN
THE CAMCORDER IS TURNED ON TO
AVOID ELECTRIC SHOCK.
1. Slide the CAM/OFF/VIDEO switch to OFF.
2. Connect a fully charged batteries or the AC adapter/charger ("Loading Batteries;
Camcorder Batteries" p15, "Using Alternative Power Sources" p17).
3. Slide the DC camera light onto the DC camera light shoe with the camera light lens
facing the same direction as the camcorder's lens.
4. Hold down the red button on the CAM/OFF/VIDEO switch while sliding it to CAM.
5. Press the operate button on the DC camera light to turn it on and off.
Notes when using the DC camera light:
Keep the DC camera light away from splashing or dripping water.
Never cover the DC camera light with paper, plastic or other object as the cooling vents
may become blocked possibly causing the camera light to overheat.
Never use the DC camera light in the vicinity of explosive or highly flammable materials.
26
Getting Started
Always allow the DC camera light to cool fully before storing.
The DC camera light becomes very hot during use of the camera light or immediately
after use. Be careful that your hand or hair does not touch them.
When the DC camera light is on, avoid subjecting the camera light to impacts or sharp
vibrations.
If the DC camera light is turned on and off during recording, there could be noise in the
picture. Watch the battery charge indicator especially when using a battery as the power
source.
When the DC camera light is used, the operation time of the camcorder when a fully-
charged battery pack is attached is halved.
Removing the DC Camera Light
Depress the light to release the tab from the hook and then move the light in the
direction of the arrow as shown in the figure.
Replacing the DC Camera Light Bulb
1. Turn the front of the case counter-clockwise and remove it.
2. Remove the bulb by pulling it out through the opened case.
3. Install the new bulb by aligning the notch in the rim of the bulb's base with the " "
mark outside the socket. Avoid touching the bulb directly with your fingers. It may
shorten the life of the bulb.
4. Reattach the front of the case by placing the bulb in the hole of the reflective plate,
lining up the smaller "-" mark on the front of the cover with the "-" mark on the DC
camera light, and turning the front of the cover clockwise till the larger "-" mark on the
front of the cover aligns with the "-" mark on the DC camera light. Check that the front of
the camera light is attached properly before turning the light on.
27
Getting Started
Note: Only replace the camera light bulb with VM-CP4L (optional) to reduce the risk of
fire.
28
Getting Started
Using Memory (The remote control is optional for VM-E110A)
The linear time counter memory stops a rewinding tape at approximately 0:00:00M. This
feature helps in locating a specific point in the tape to which you wish to return. An
example might be that you have recorded some tape that you have already watched,
you continue recording but do not care to watch the tape you recorded earlier. The
memory feature returns you to the beginning of the most recent recording.
1. Press the DISPLAY button on the remote control so the linear time counter with
memory is displayed as shown in the figure.
2. Start recording or playback of a cassette. Press the COUNTER RESET button on the
remote control at the point to which you wish to return. The linear time counter clears to
0:00:00M.
3. Press the STOP button to stop playback, or press the start/stop recording and set the
CAM/OFF/VIDEO switch to VIDEO.
4. Press the REW button and the tape stops at approximately where you reset the linear
time counter. This feature works in F.F as well.
Setting the Date and Time
Take the time to set the date and time now. The date and time can be recorded on your
tapes to act as a handy reference when viewing them later. Use the following procedure
to set up the display for the current date and title.
Note: Be sure to insert the date/title battery before setting the date and time. Although the
date and time can be set without the date/title battery inserted, they will disappear when the
battery providing power to the camcorder is removed.
Make sure that the current time is displayed correctly before you start filming.
29
Getting Started
1. Load the battery ("Loading the Batteries: Camcorder batteries" p.15). Press the red
button on the CAM/OFF/VIDEO switch as you slid it to CAM.
2. Press the DATE/TITLE button and look into the viewfinder. The date and time should
appear in the lower right with the "1" flashing.
3. Pressing the F.F button gives you higher numbers while the REW button gives you
lower numbers. Select the right month and press STOP button. Use the F.F, REW and
STOP buttons to select the proper day, year, hour, minute, and AM or PM.
4. After setting the AM/PM, press the DATE/TITLE button. The display changes and the
internal clock starts.
30
Getting Started
Note: The date/time graphics will be recorded whenever they appear in the viewfinder.
Correcting the Date and Time
1. Press the DATE/TITLE button while pressing the stop button. The flashing cursor
appears at the month.
2. Move to where you need to make the correction with the STOP button and use the
F.F and REW to correct.
3. Press the DATE/TITLE button to set the corrected date and time.
Automatic Date Recording
This feature records the date automatically once a day. After you begin recording, the
date is displayed and recorded automatically for 10 seconds. The same date is
recorded again in the following cases; when the cassette is replaced, when " AUTO" is
displayed again after being switched to the date display and when the recording is less
than 10 seconds long.
If the date changes while recording continues over 10 seconds, the date is recorded for
10 seconds when recording is restarted after the camcorder has been set to the standby
once.
Press the DATE/TITLE button until " AUTO" and the date appear at the lower right of
the viewfinder before you begin to record. The date will be recorded whenever it
appears in the viewfinder.
Automatic Title Recording
This function automatically records the created title on the tape together with the date
for about 10 seconds after recording is started.
Note: Be sure to insert the date/title battery before starting automatic title recording.
1. Slide the CAM/OFF/VIDEO switch to CAM.
2. Press the DATE/TITLE button to display " TITLE" in the viewfinder. The created title
and set date will also appear.
3. Press the start/stop button. The title and date are recorded simultaneously on the
tape. 10 seconds after the recording is started, the title and date disappear and the
automatic title recording function is released. (Recording will continue.)
4. To end recording, press the start/stop button again.
31
Getting Started
Note: When " TITLE" is displayed in the viewfinder, the title cannot be turned on or off
using the remote control. To insert the title during recording, press the DATE/TITLE button
on the camcorder so that " TITLE" disappears. (The remote control is optional for VM-
E110A.)
Using the Linear Time Counter
The linear time counter displays the tape run in hours, minutes, and seconds helping
you to keep track of how long you've been filming or time you have left to film before
running out of tape.
Turn the camcorder on to display the linear time counter. The linear time counter keeps
track from when you load a cassette into the camcorder and clears to 0:00:00 when the
cassette is ejected.
Using the Display Button (The remote control is optional for VM-E110A)
Pressing the DISPLAY button on the remote control allows you to switch the displays in
the viewfinder. When the camcorder is turned on, the linear time counter appears.
Pressing the DISPLAY button once displays the linear time counter with the memory
feature.
When a recorded tape is in the camcorder during the VIDEO mode, "SEARCH"
appears in the viewfinder. (Refer to "Date Search" on page 23.)
Pressing the DISPLAY button a second time returns to the linear time counter.
32
Getting Started
Note: The linear time counter with the memory feature in the viewfinder can also be
displayed on the connected television.
Date Search
The date search function memorizes the start and end positions of recordings you made
on a specific day so you can easily locate those positions later as long as the cassette
is left in the camcorder.
Note: Be sure that the date and time are set.
1. Attach a power source and slide the CAM/OFF/VIDEO switch to VIDEO.
2. Press the DATE/TITLE button (DISPLAY on the remote control) to display "SEARCH"
in the viewfinder.
3. Press the REW button to search for the start position from which you last made a
recording or the F.F button (the F.FWD button on the remote control) to recording end
position.
4. When the required position is located, the camcorder enters the stop mode and
"SEARCH" disappears from the viewfinder.
Note: If you have ejected the cassette, this function will not operate with that cassette.
(When a cassette is inserted and the recording is started, the position is identified as the
recording start position on that day.)
Note: If the date/title battery is not inserted, the date search function does not operate
when the battery providing the power to the camcorder is removed.
Note: When the cassette was recorded by another camcorder, the date search function
does not operate.
Note: The date search function is released when you press the STOP button during date
search mode.
Note: If the recorded time is less than 30 seconds, the date search function may not
operate normally.
Remaining Tape
7The tape remaining display shows the remaining tape that can be used for recording and
playback, using seven dashes. This feature is handy when recording since it lets you know
33
Getting Started - Identifying Controls
how long you can record on the loaded tape.
Insert a cassette into the camcorder and start recording or playback; 10 seconds later, the
remaining tape will be displayed. When the cassette is ejected, the display will disappear.
"
" is displayed for 10 seconds after the tape starts to run.
Note: The tape remaining display appears 10 seconds after the tape starts to run.
Note: When the remaining tape time becomes less than about three minutes, TAPE END
flashes in the viewfinder.
Getting Started - Identifying Controls
Left side / Front / Back Controls Illustration
81. Lens
F1.6 (4~48mm) 12:1 power zoom lens with auto focus and auto iris functions.
2. Viewfinder BRIGHT, COLOR and TINT controls
Refer to page 9.
3. Cassette Holder Close Button
CAUTION: Be sure to press this button to close the cassette holder. Otherwise, the tape
may become slack and may be damaged.
4. Cassette Holder
A power source must be connected to the camcorder before a cassette can be inserted
or removed.
5. Microphone
6. Infrared Receiver
The area where infrared signals from the wireless remote are received. Aim the remote
control to this area for best results.
7. Record Indicator
This indicator lights when the camcorder is recording.
34
Getting Started - Identifying Controls
8. EJECT Switch
A power source must be connected before cassettes can be inserted or removed
though the CAM/OFF/VIDEO switch may be set to OFF ("Inserting and Removing
Cassettes," p18).
9. DATE/TITLE (DISPLAY) Button
Use this button to record the date, time and title on your tape. Any time that the date,
time and title displays appear in the viewfinder, they are recorded on your tape. This
button can be used instead of DISPLAY button on the remote control in the VIDEO
mode.
Note: Be sure to insert the date/title battery before setting the date and time or creating a
title.
10. F.F Button
Use this button to fast forward tapes or for visual search. During visual search the
camcorder fast forwards at approximately 9 times normal playback speed. Also use this
button to set date and time.
11. STOP Button
Use this button to stop playback, fast forward, or reverse. Also use this button to set
date and time.
Right side / Viewfinder / Battery cover Illustration
12. Marking QUICK EDIT
Hold down the REW, F.F or PLAY button in the record pause mode; the camcorder
enters the rewind, fast forward or play mode (Using Quick Edit", p38).
13. REW BUTTON
Use this button to fast rewind tapes or for visual search. During visual search the
camcorder rewinds at approximately 7 times normal playback speed. Also use this
button to set date and time. Furthermore, use this button to review the last few seconds
of the tape you are recording.
14. PLAY Button
Use to playback recorded tapes.
915. FOCUS Control (AUTO/MAN) Buttons
Press these buttons simultaneously to select manual or automatic focus. For manual focusing
("Using Manual Focus", p. 37), press the F or N buttons to bring the subject into focus. When
using manual focus, FOCUS appears in the viewfinder.
16. Diopter Control
To use the electronic viewfinder, turn this control for your optimum focus adjustment.
35
Getting Started - Identifying Controls
17.CAM/OFF/VIDEO Power Switch
Hold down the red button as you slide the switch to CAM or VIDEO. You do not need to
hold down the red button to slide the switch to OFF.
18. INST. ZOOM (Instant Zoom) Button
Use this button to magnify the image being recorded 1.5 times momentarily.
19. Power Zoom Switch
Use this to zoom automatically ("Using the Power Zoom," p 35).
20. Camera Light Show
Attach the DC camera light here.
21. OPEN Lever
Use this to open or close the cover of the power supply attachment holder ("Camcorder
Batteries", p15).
22. Power Supply Attachment Holder (Behind the cover)
Attach a battery or alkaline batteries here ("Camcorder Batteries", P15).
23. Hand Strap
Refer to page 26.
Right side / Bottom jacks Illustration
24. DC IN Jack (Behind the jack cover)
When using the AC adapter/charger, connect one end of the DC cord (provided) to this
jack and the other end to the DC OUTPUT jack of the AC adapter/charger. When using
the car battery cord (optional), connect this jack and the DC OUTPUT jack of the car
battery cord.
25. Start/Stop Button
When the CAM/OFF/VIDEO switch is in CAM press this button to start recording. When
pressed a second time the camera pauses. During playback use this button to stop the
tape temporarily. Pressing a second time resumes normal playback.
26. AV IN/OUT Jack (Behind the jack cover)
Use this jack to connect the camcorder to a VCR or television ("Playing Back Your
Recording," p32, "Using Synchro Edit", P43).
27. AV OUTPUT Jack (Behind the jack cover)
Use this jack to connect the camcorder to a VCR or television ("Playing Back Your
Recording," p30, 31, "Dubbing from the Camcorder to a VCR," p 42 "Recording
Television Programs," p45).
28. Date/Title Battery Compartment
36
Basic Techniques
Pull the battery holder and install the date/title battery (provided).
29. Tripod Mounting Threaded Socket
Use this threaded socket to mount the camcorder to a tripod.
(The remote control is optional for VM-E110A)
Remote Control Illustration
30. Recorder's Remote Control
The shaded buttons on the remote control have the same functions as the
corresponding buttons on the camcorder.
31. S.EDIT (Synchro Edit) Button (only on the remote control)
Use this button to activate the synchro edit function for dubbing ("Using Synchro Edit",
P43).
32. TITLE ON/OFF Button (only on the remote control)
Use this button to create and record titles for your tapes ("Creating and Recording a
Title," p 39).
33. COUNTER RESET Button (only on the remote control)
Use this button to reset the linear time counter to 0:00:00.
34. DISPLAY Button (only on the remote control)
Use this button to select the viewfinder and TV display ("Using the Display Button,"
p22). When using the date search function, the DATE/TITLE button of the camcorder
can also be used instead of this button ("Date Search," P22).
35. A/V DUB Button (only on the remote control)
Use this button to record new audio and video over existing audio and video.
Basic Techniques
37
Basic Techniques
The batteries are in place and charged, the date and time are set, and you are familiar
with the controls it's time to make a recording. Basic recording is easy and simple.
Hooking up the camcorder to your TV is not complicated but give yourself plenty of time
to ensure connections are correct.
This section guides you through basic recording and playback. Practice the basic
techniques of recording and playback on something unimportant such as traffic or a
short tour of your backyard. Once familiar with how the machine works you can move to
the more sophisticated features with less stress.
Let's get started!
Making a Basic Recording
The Hitachi VM-E110A/E310A uses PROGRAM AE auto exposure that automatically
selects the optimum shutter speed (either 1/60, 1/120, 1/180, 1/250, 1/350, 1/500,
1/750, 1/1000, 1/1500, 1/2000, or 1/4000 of a second). The iris adjusts automatically in
response to shutter speed.
1. Connect the camcorder to a power source ("Loading Batteries; Camcorder Batteries,"
p 15, "Using Alternative Power Sources," p17).
2. Insert an 8mm cassette ("Inserting and Removing Cassettes," p18).
3. Press the red button on the CAM/OFF/VIDEO switch as you slide it to CAM.
appears and the camcorder is now ready to record.
4. Use the diopter control to match the viewfinder's focus with your eyesight.
5. When you are ready to record press the Start/Stop button. REC appears in the
viewfinder and the camcorder records the picture you see in the viewfinder.
Note: TAPE flashes in the viewfinder when the tab on the side of the cassette is completely
visible.
38
Basic Techniques
6. To stop recording press the Start/Stop button and REC disappears from the
viewfinder replaced by . This places the camcorder in standby.
Note: TAPE END flashes in the viewfinder when about 3 minutes or less remain of the tape
cassette.
Note: If the camcorder is left in record/pause mode for more than 5 minutes, the camcorder
turns off automatically. To restart it press the Start/Stop button and the camera returns to
record/pause mode.
Playing Back Your Recording
Depending on the setup of your video equipment, you connect the camcorder in one of
the 3 methods explained below.
10Connecting to a Television with a VCR Attached
1. Connect the audio/video cable (provided) to the AUDIO IN and VIDEO IN jacks of
your VCR.
2. Connect the other ends of the cable to the AUDIO OUT and VIDEO OUT jacks of the
camcorder.
3. Insert a previously recorded cassette into the camcorder.
4. Turn on your VCR and place it in the camcorder input mode (consult your VCR
manual for details). Operate the television as you normally do to see the signal coming
from the VCR.
5. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
VIDEO.
6. Press the PLAY button to begin playback.
7. Press the STOP button when finished.
Connecting to a Television with Audio In and Video In Jacks
111. Connect the audio/video cable (provided) to the AUDIO IN and VIDEO IN jacks of your
television.
2. Connect the other ends of the cable to AUDIO OUT and VIDEO OUT jacks of the
camcorder.
3. Insert a recorded cassette into the camcorder.
4. Turn on your television and set to the camcorder input mode (consult your television manual
for details).
5. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO.
6. Press the PLAY button to begin playback.
7. Press the STOP button when finished.
Connecting to a Television without Audio In and Video In Jacks
121. Disconnect the VHF antenna leads from the back of the television. Leave the UHF
antenna leads connected.
2. Connect the VHF antenna lead to ANT IN of the RF output adapter. If the cable on the VHF
antenna lead is flat you need to purchase an antenna adapter (300-ohm to 75-ohm
transformer). Connect the antenna adapter to the VHF antenna lead and slide the adapter on
39
Basic Techniques
to the ANT IN terminal.
3. Connect the 75-ohm coaxial cable of the RF output adapter to the VHF antenna terminals
on the back of the television. If the television is set up to connect to a flat antenna lead you
need to purchase antenna adapter (75-ohm to 300-ohm transformer). Connect the adapter to
the 75-ohm coaxial cable of the RF output adapter and connect the free ends of the adapter to
the VHF antenna terminals at the back of your television.
4. Connect the RF output adapter cable to the AV IN/OUT jack of your camcorder.
5. Turn your television on and select channel 3 (channel 4 if channel 3 is a channel used in
your area).
6. Select the CH3 or CH4 on the RF output adapter matching the channel selected on your
television.
7. Insert the previously recorded cassette into the camcorder.
8. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to VIDEO.
9. Press the PLAY button to begin playback.
10. Press the STOP button when finished.
Simple Playback (Using the Electronic Viewfinder)
1. Insert the cassette ("Inserting and Removing Cassettes," p 18).
2. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
VIDEO.
3. Press the PLAY button and enjoy your video.
4. Press the STOP button when finished.
Using Still
To view a still picture during playback press the Start/Stop. Press the Start/Stop button
again to resume playback. If you leave the camcorder in play/pause mode for more than
5 minutes the camcorder automatically stops the cassette to prevent damage to the
tape.
Note: When you engage play/pause mode the still picture will have some interference or
noise. This is normal.
Using Forward and Reverse Search
When looking for a particular point in your videotape use the FF. button and REG button
to find the spot quickly.
Press FF. button during playback to play the tape forward at approximately 9 times
normal speed. Press PLAY button to return to normal playback.
40
Basic Techniques
Press REG button during playback to play the tape backwards at approximately 7
times normal speed. Press PLAY button to return to normal playback.
Note: When you engage FF. button or REG button the picture will have some interference
or noise. This is normal during search mode.
41
Advanced Techniques
Advanced Techniques
The Hitachi VM-E110A/E310A offers a diverse group of features that add interest and
excitement to your videos. Adding fades to smooth transitions creates videos with a
professional look.
As you learn and practice with these features think of situations that they might fit in and
add a special touch.
Using the Power Zoom
The power zoom W control widens the picture, moving the subject farther away, while
the power zoom T control brings the subject closer, narrowing the picture. If ZOOM
appears at the left of the viewfinder, the digital zoom function shown below has been
engaged.
When the power zoom switch is operated, the zoom position is displayed in the
viewfinder for about 5 seconds and then disappears. The zoom position is displayed in
10 steps.
Using the Digital Zoom
The digital zoom increases the magnification of the power zoom by 2 times. You must
place the subject you wish to magnify at the center of the viewfinder.
Note: This digital zoom has certain limitation and may degradative at extreme
magnification and amplify camcorder's movement.
42
Advanced Techniques
Press and hold the power zoom T control until you find the picture you want. You control
the zoom with the power zoom T and W controls. When ZOOM is not displayed in the
viewfinder, normal zoom functions resume.
Using the INST. ZOOM (Instant Zoom) Button
The instant zoom feature activates the digital zoom to magnify the subject 1.5 times
regardless of zooming engaged by the power zoom T and W controls.
Press the INST. ZOOM button. I. ZOOM appears at the left of the viewfinder and the
picture is magnified 1.5 times momentarily.
Note: To return to the original zoom position, press the INST. ZOOM button so that I.
ZOOM disappears from the viewfinder.
Note: This instant zoom has certain limitations and may degradate at extreme
magnification and amplify camcorder's movement.
Using Auto Focus
13The camcorder focuses the subject in the center of the viewfinder automatically unless the
manual focus is engaged. If FOCUS appears in the viewfinder, manual focus is engaged.
Press the FOCUS control (AUTO/MAN) buttons simultaneously to return to auto focus.
43
Advanced Techniques
The auto focus will not work under the following conditions and you must focus
manually:
Objects outside the center of the viewfinder
Objects at different distances in the center of the viewfinder
Brightly lit objects such as a neon light, objects lit by spotlight, etc.
Objects behind water dappled or dusty glass
Objects with little difference in light reflection such as a white wall
Rapidly moving objects
Dark objects
Note: With the T zoom control you can use the auto focus with subjects that are 3.3 feet
away from the lens and further away to infinity. With the W zoom control you can use the
auto focus with subjects 0.4 inches away from the lens and further away to infinity.
Using Manual Focus
44
Advanced Techniques
1. Press the FOCUS control (AUTO/MAN) buttons simultaneously. FOCUS displays in
the viewfinder. You can adjust the focus manually.
2. Use the power zoom T control to zoom up completely to your subject. If you don't use
the T control to zoom to the picture you want, the picture may fall out of focus when
actual recording starts.
3. Press the Focus control (AUTO/MAN) F (far) or N (near) button until the subject is in
focus.
4. Use the power zoom W control to zoom back to the picture you desire.
Note: To return to auto focus press FOCUS control (AUTO/MAN) buttons and the FOCUS
disappears from the viewfinder.
Using Instant Review
Use this feature to view the last few seconds of the tape you shot.
1. Set the camcorder to record/pause mode and tap the REW button. The last few
seconds of tape play back in reverse and then in normal playback mode.
2. The camera plays back to the spot where you paused and returns to record/pause
mode (standby). Press the Start/Stop button to resume recording.
Using Quick Edit
Use quick edit to search for the end of previously recorded material, find a particular
spot on your tape, begin editing, or record new material. While the camera is in
record/pause mode hold down the F.F, REW, or PLAY button and visually search the
45
Advanced Techniques
tape. Release the button and the camcorder stops the tape at the exact position you
selected.
Using Macro
14This function allows you to shoot subjects as close as 0.4 inches. Press and hold the power
zoom control W. The camera focuses on the subject automatically. Check your lighting as it
tends to be insufficient when filming close up.
Creating and Recording A Title (The remote control is optional for VM-E110A)
Create titles easily and personalize your recordings while keeping a permanent visual
record of what is contained on a tape. The camcorder can store a title in its memory. A
title stored in memory can be displayed and recorded at any time. A title contains two
lines of up to 16 characters per line. The camcorder contains 47 different characters for
creating a title. When creating a title, use the TITLE ON/OFF button on the remote
control. (When creating a title in the CAM mode, the DATE/TITLE button of the
camcorder can be used instead of the TITLE ON/OFF button on the remote control. "
TITLE" should be displayed in the viewfinder at this time.)
Note: Be sure to insert the date/title battery before creating a title. Although a title can be
created without the date/title battery inserted, it will disappear when the battery providing
power to the camcorder is removed.
46
Advanced Techniques
Creating a Title
1. Connect the camcorder to a power source.
2. Hold down the red button on the CAM/OFF/VIDEO switch and slide it to either CAM or
VIDEO.
3. Press the TITLE ON/OFF button on the remote control and a flashing cursor appears in the
viewfinder.
4. Use the STOP button to place the cursor where you wish to begin your title.
5. Use the F.F and REW buttons to select the first character of your title.
6. Once you've selected a character press the STOP button to set it.
7. Complete the title by repeating steps 5 and 6.
8. When you complete your title, press the TITLE ON/OFF button on the remote control to
store the title in memory and remove the title graphics from the viewfinder.
Note: As long as the correct current time can be displayed, the title is held in memory.
Correcting Errors
1. Press the TITLE ON/OFF button on the remote control.
2. Use the STOP button to select the character to be corrected.
3. Use the F.F and REW buttons to correct the character.
4. Press the TITLE ON/OFF button on the remote control to store the corrected title in
47
Advanced Techniques
memory.
Recording Title on a Tape in the Camcorder
1. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
CAM.
2. Locate the point of the tape where you wish to record the title ("Using Quick Edit," p
38).
3. Press the TITLE ON/OFF button on the remote control.
4. Press the Start/Stop button to start recording the title.
5. Press the TITLE ON/OFF button on the remote control to stop recording the title. The
title graphics disappear from the viewfinder and the camcorder can record normally.
Note: Create and store your title before an event you plan to record. Just press the TITLE
ON/OFF button on the remote control to superimpose the title over the scene as you record
it. This method avoids erasing previously recorded material which will happen when you
record a title on a previously recorded tape.
Note: Title recording is disabled when you connect the optional AV input cable to the AV
IN/OUT jack to record video and audio from the television or VCR.
Recording a Created Title while Transferring a Tape
1. Connect the camcorder to the VCR (p30).
2. Turn on the VCR and set it to record. Hold down the red button on the
CAM/OFF/VIDEO switch while sliding the switch to VIDEO. Press PLAY on the
camcorder.
3. Press the TITLE ON/OFF button on the remote control at the point on the tape where
you wish to record the title.
4. Press the TITLE ON/OFF button on the remote control again to stop recording the
title.
Note: Recording the title during tape transfer will erase a portion of your recorded material.
Using the Wireless Remote Control (The remote control is optional for VM-E110A)
Use the wireless remote control to operate the camcorder from a distance. The PLAY,
F.FWD, REW, STOP, PAUSE (START/STOP) and ZOOM buttons on the wireless
remote control operate the functions of the corresponding buttons on the camcorder.
Aim the wireless remote control at the infrared ray receiver of the camera recorder.
Aiming the remote.
Note: Use the wireless remote control within the range of the infrared ray receiver of the
48
Advanced Techniques
camcorder shown above.
Note: The wireless remote control may not function in strong light such as direct sunlight or
very bright artificial lighting.
Note: Clear a direct path from the wireless remote control to the infrared ray receiver. The
wireless remote control won't work if an obstacle blocks the infrared rays.
Note: The remote control code of this camcorder is Hitachi code VCR2. If you have a VCR
with the same code you Hitachi VCR may malfunction when you use the camcorder's
wireless remote control.
How to attach remote control to the shoulder strap (The remote control is
optional for VM-E110A)
It is recommended that you fit the remote control into the holder and attach the holder to
the shoulder strap so as not to lose the remote control and for convenience when
shooting outdoors.
1. Attach the holder to the shoulder strap.
2. Attach the remote control to the holder. Fit the remote control into the holder as
shown in the figure below and push until a click is heard.
To remove the remote control
Push both sides of the holder until the remote control is released from the tab. The rear
of the remote control will be released from the holder and will lift slightly.
Dubbing from the camcorder to a VCR
15Connect the camcorder to a VCR to copy your or a friend's home 8mm recordings to VHS.
Camcorder to VCR connection Illustration
1. Connect your camcorder to the VCR, following "Playing Back Your Recording" on
49
Advanced Techniques
page 30.
2. Turn on your VCR and place it in the camcorder input mode (consult your VCR
manual for details). Operate the television as you normally do to see the signal coming
from the VCR.
3. Hold down the red button of the CAM/OFF/VIDEO switch while you slide the switch to
VIDEO.
4. Insert the recorded tape in the camcorder and a blank tape into the VCR. Set the
VCR to record.
5. Play the tape from the camcorder while recording on the VCR.
Note: If the VCR is connected to a television and the VCR/TV selector is set to VCR, you
can monitor the tape being dubbed.
Using Synchro Edit (The remote control is optional for VM-E110A)
16Use synchro edit to record only segments of a previously recorded tape when dubbing from
the camcorder to a VCR. This requires an optional synchro edit cable. The Hitachi VM-
E110A/E310A uses a flying erase head to eliminate glitches or rainbow noise that sometimes
occurs between edits. Your VCR must have the EDIT IN jack to use the synchro edit.
Synchro Edit hookup Illustration
1. Connect the synchro edit cable to the AV IN/OUT jack of your camcorder.
2. Connect the synchro edit cable to the AUDIO IN, VIDEO IN, and EDIT IN jacks of
your VCR. Connect either the right or left audio plug into your VCR if it has only one
AUDIO IN jack.
Turn on your VCR and place it in the camcorder input mode (consult your VCR manual
for details).
3. Insert the recorded tape in the camcorder and a blank tape into the VCR.
4. Play the tape in the camcorder until you find the place you want to record. Press the
Start/Stop button.
5. Press the RECORD button on the VCR. It automatically sets to pause. If the VCR
begins to record instead of pausing you need to change the position of the switch on the
synchro edit cable. Stop the VCR, change the position of the switch, and press the
RECORD button on the VCR.
6. Press the S.EDIT button on the remote control and the last few seconds of the
recorded tape reviews in the viewfinder and then the camcorder is placed in playback.
The recording VCR starts recording automatically.
7. Press the F.F, REW, STOP and Start/Stop buttons to pause the VCR. You can then
search forward or back through the tape without affecting the tape in the VCR.
Use the F.F and REW buttons to search the tape. Press the PLAY button to resume
normal playback. To resume recording on the tape in the VCR, press the Start/Stop
button and then the S.EDIT button.
To fast forward or rewind the tape, press the STOP button, then F.F or REW. To return
to recording on the tape in the VCR, press the STOP button, then the PLAY button, then
the Start/Stop button, and then the S.EDIT button.
8. To stop recording at a certain point turn on the camcorder's linear time counter with
50
Advanced Techniques
memory ("Using Memory," p20). Press the COUNTER RESET button on the remote
control where you wish the recording to stop. The linear time counter resets to
0:00:00M. Rewind to the point where you wish to start recording and start copying.
When the linear time counter reaches 0:00:00 the recording stops automatically,
pausing the VCR in the record mode.
Note: If the tape counter reads "0:00:00M" you cannot start recording.
Using Audio/Video Dubbing (The remote control is optional for VM-E110A)
17Use audio/video dubbing to record audio and video from the camcorder's built-in microphone
and camera onto a previously recorded tape in the camcorder.
Audio/Video Dubbing operation Illustration
1. Connect your camcorder to the television, following "Connecting to a Television with
Audio In and Video In Jacks" on page 31.
2. Turn on your television and place it in the camcorder input mode (consult your
television manual for details).
3. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
VIDEO.
4. Insert a previously recorded tape in the camcorder.
5. Use the wireless remote control and press the PLAY button. Use the PLAY, F.FWD,
and REW buttons to find the place where you want to stop dubbing. Press the PAUSE
(START/STOP) button.
6. Display the linear timer counter with memory ("Using Memory," p20). Press the
COUNTER RESET button to set the linear time counter to 0:00:00M.
7. Use the REW and PLAY buttons to find where you wish to start dubbing. Press the
PAUSE (START/STOP) button.
8. Press and hold the A/V DUB button while pressing the PLAY button. This places the
camcorder in A/V DUB pause mode.
9. Press the PAUSE (START/STOP) button. The audio/video dubbing starts. When the
linear time counter reaches 0:00:00M the camcorder stops automatically, recording only
the portion of the tape that you selected.
Note: If the camcorder is in AV DUB pause or STILL mode for more than 5 minutes, the
camcorder stops automatically to protect the tape.
Note: Automatic date recording is disabled during audio/video dubbing.
Note: When the audio/video dubbed portion is played back, noise may appear at the end of
the dubbed portion.
Recording Television Programs
51
Advanced Techniques
If your television or VCR has AUDIO OUT and VIDEO OUT jacks you can record
television programs with your camcorder.
Recording Television Programs Illustration
1. Connect the optional AV input cable to the VIDEO OUT and AUDIO OUT jacks of
your television or VCR.
2. Connect the free plug to the AV IN/OUT jack of your camcorder.
3. Connect the camcorder to a power source.
4. Insert a cassette in the camcorder.
5. Hold down the red button on the CAM/OFF/VIDEO switch while sliding the switch to
CAM.
6. Turn your television or VCR on and tune it to the channel you wish to record from.
7. Press the Start/Stop button to start recording the program that is on the screen of the
television.
8. Press the Start/Stop button again to stop recording.
Note: If the tape is played back while the AV input cable is left connected to the camcorder,
noise may appear in the picture. In this event, press the STOP button to stop the
camcorder, unplug the AV input cable and play back the tape again.
Note: To monitor the picture being recorded, connect the audio/video cable (provided) to
the VIDEO IN jack of the television as shown above.
52
General Maintenance
General Maintenance
Cleaning the camcorder Heads
Dirt can accumulate on the video heads on the camera causing the playback picture to
become blurred or appear as if video information is lost. This often means that the video
heads are dirty. Use a video head cleaner such as a dry type head cleaning tape to
clean the heads.
If after cleaning the heads the picture does not clear up consult your nearest dealer or
VCR service center for professional head cleaning.
Cleaning the Lens and Picture Tube of the Electronic Viewfinder
The lens of the electronic viewfinder can be user-cleaned if dust, dirt, or other foreign
matter adheres to it.
Cleaning the Lens Illustration
1. Rotate and remove eye cup.
2. Clean the picture tube face and lens.
To prevent scratching, use a soft non abrasive cloth, swab or lens cleaning paper.
3. Align the reference mark and rotate the eye cup in the direction of arrow.
Periodic Maintenance
A precision electromechanical device, the Hitachi VM-E110A/E310A requires
maintenance after a period of normal use. We expect that no other maintenance other
than head cleaning will be required during the period of warranty unless the camcorder
is used either heavily or seldom. Defective parts are covered by the warranty. Normal
maintenance is the responsibility of the owner. Consult your dealer or local VCR service
center for recommendations regarding normal maintenance based on your use patterns,
location, and the age of the camcorder.
53
General Maintenance
Troubleshooting
Quality is very important at Hitachi. We inspect and check every camcorder carefully at
the factory under the most rigid quality control and inspection systems. If problems
develop please check the following possible solutions before inquiring about
professional service.
INSERTING OR REMOVING THE CASSETTE
Symptom
Check Point & Correction
Cassette holder cannot be opened when
you slide “EJECT” button
Cassette cannot be inserted into cassette
compartment.
Connect the power source.
Load cassette in direction indicated by
arrow on cassette.
Cassette window must be toward outside.
CAMERA RECORDING
Symptom
Picture does not appear in the viewfinder.
Check Point & Correction
Remove the lens cap.
`Slide the power switch to “CAMERA”
Disconnect the AV input cable from the
camera/recorder.
The camera/recorder cannot go into the
recording mode, even when the start/stop
button is pressed.
Check the record protect tab on the
cassette.
Make sure that the “FOCUS M” does
not appear in the viewfinder. If it is
displayed, press “Focus” select button to
erase it.
Picture is out of focus.
Auto-Focus does not operate if a special
effects filter is attached.
.
RECORDING TV PROGRAMS OFF THE AIR
Symptom
Check Point & Correction
The camera/recorder can not be set to Check the record protect tab on the
the recording mode, even when the
start/sop button on the
cassette.
camera/recorder is pressed.
Set the power switch to “CAMERA”
position.
Connect the camera/recorder and TV
(or VCR).
54
Specifications
PLAYBACK OF PRE-RECORDED CASSETTE
Symptom
Check Point & Correction
“PLAY” button cannot be engaged.
Set the power switch to “VIDEO”
position.
No picture appears on television
Set the television to the
screen when “PLAY” button is pressed. camera/recorder channel (3 or 4)
depending upon the selected channel
in the RF channel select switch of RF
output adapter. (TV is connect to the
camera/recorder by using RF output
adapter.)
Interference on playback picture.
When you see the playback picture on
yourTV, adjust fine tuning knob on
television set to obtain best picture.
TV receiver is older type. It needs to
be modified to work properly with
camera/recorder.
Picture bends at the top of the TV
screen.
Tape is damaged, try another cassette.
TV set has VIR circuit. Turn off during
playback.
Color of your TV screen is too bright,
too faint or change.
Specifications
General Specifications
Power requirements
Power consumption
6V DC
VM-E110A: 4.7W (when recording)
VM-E310A: 5.3W (when recording)
Dimensions
211mm)
Weight
3-11/16" W x 4-12/16" H x 8-5/16" D (94mm x 120mm x
VM-E110A: 1.90 lbs (860g) without battery pack, lens
hood, lens cap or cassette
VM-E310A: 1.87 lbs (849g) without battery pack, lens
hood, lens cap or cassette
Operating temperature
Storage temperature
32°F ~ 104°F (0°C ~ 40°C)
-4°F ~ 140°F (-20°C ~ 60°C)
Video Recorder Specifications
Format
8mm
Record/playback
Video signal
Tape speed
Video input
Two video record/playback heads
EIA standard NTSC color
14.3mm/sec
1.0Vp-p, 75 ohm
Video output
Audio input
1.0Vp-p, 75 ohm
-7.8dBs (316mVrms)
55
Accessories Add Excitement
Audio output
-7.8dBs (316mVrms)
Fast forward/rewind time Less than 8 minutes with P6-120 cassette
Camera Specifications
Scanning
525 lines/60 fields/30 frames
Required minimum illumination 1 lux
Pickup device
Lens diameter
1/4" C.C.D.
46mm
For U.S.A. only
HITACHI
Service Hotline
To locate an authorized
HITACHI service facility
in the continental U.S.A.
DIAL TOLL FREE
7 days a week, 24 hours a day
800 HITACHI
1-800-448-2244
Hitachi Home Electronics (America), Inc.
Hitachi has made every effort to assure you hours of trouble free operation from your
unit. However, should you require service, a network of Hitachi Authorized Service
Facilities has been established in all 50 states and Puerto Rico. Each facility will provide
you with convenient and expedient assistance. Our service "Hotline" operator will direct
you to the Hitachi Authorized Service Facility nearest you. Just present proof of
purchase and/or delivery receipts to the Hitachi Authorized Service Facility and service
will be rendered in accordance with the terms of the limited warranty as stated on your
warranty card or operating guide.
Should you have any questions regarding in-warranty service, operation or
technical assistance, please contact:
Hitachi Home Electronics (America), Inc.
3890 Steve Reynolds Blvd
Norcross, GA 30093
Tel 404-279-5600
Hitachi Sales Corporation of Hawaii
3219 Koapaka St./Honolulu, HI 96819
Tel 808-836-3621
Accessories Add Excitement
56
Accessories Add Excitement
We know that once you discover how much your Hitachi VM-E110A/E310A can add to
your life you will want to use these accessories for even more excitement. Converter
lenses, adapters for synchro editing, and car cords are just a few of the exciting
accessories available to you from Hitachi. Hitachi takes you to wherever your
imagination leads.
Available Accessories
To Order in the United States
By Phone
To place an order by phone, have your VISA, MASTERCARD, or AMERICAN
EXPRESS card ready and call Hitachi's toll-free number anytime: 24 hours a day, 7
days a week.
1-800-HITACHI
By Mail
Complete the order form on page 55. Detach it and send it to the following address with
your credit card information, money order, or check (in U.S. currency and payable to
Hitachi Home Electronics (America), Inc.)
Hitachi Home Electronics (America), Inc.
Parts Division
401 West Artesia Blvd.
Compton, CA 90220
57
HITACHI WARRANTY CARD (USA Front)
HITACHI WARRANTY CARD (USA Front)
U. S. A. ONLY
NOT VALID IN CANADA
HITACHI
Hitachi Home Electronics (America), Inc.
Hitachi Sales Corporation of Hawaii, Inc.
LIMITED WARRANTY
Hitachi Home Electronics (America), Inc. and Hitachi Sales Corporation of Hawaii
("Hitachi",) warrants this component in duration as stated below:
* VIDEO CASSETTE RECORDER
* CAMCORDER
* AC ADAPTER CHARGER
* 90 DAYS LABOR (Carry-in)
* 1 YEAR PARTS (Except Battery)
Conditions of Hitachi Limited Warranty
Hitachi Video Products are warranted to be free of defects in parts and workmanship at
the time of purchase by the original owner. If this product is found to be defective,
Hitachi will repair or replace defective parts at no charge to the original owner. Parts
used for replacement are warranted for the remainder of the original Limited Warranty
period. For 90 days from the date of original purchase, Hitachi will provide labor for the
repair or replacement of defective parts without charge, subject to the following
conditions:
1. Owner must provide verification of the date of purchase when requesting Limited
Warranty Service. (Dated Sales Receipt Required)
2. All repairs must be performed by a Hitachi Authorized Service Facility.
For information concerning repairs, operation, technical assistance or for referral to the
location of your nearest Authorized Service Facility or Parts Distributor, call 1-800-
HITACHI (1-800-448-2244)
HITACHI HOME ELECTRONICS (AMERICA), INC.
3890 Steve Reynolds Blvd.
Norcross, GA 30093
Tel: 404-279-5600
58
HITACHI WARRANTY CARD (USA Front)
HITACHI SALES CORPORATION OF HAWAII
3219 Koapaka St.
Honolulu, HI 96819
Tel: 808-836-3621
59
HITACHI WARRANTY CARD (USA Back)
HITACHI WARRANTY CARD (USA Back)
Warranty Limitations
The Limited Warranty provided by Hitachi does not cover:
A. Cabinet (exterior finish items), Battery Packs, Accessories, Head Cleanings, Video
Tape Damage, or TV Set Modifications.
B. Any defect, malfunction, or failure caused by or resulting from improper service,
maintenance, repair, use of Video Cleaning Cassettes, or from abuse, neglect, accident,
or any other cause beyond the control of Hitachi.
C. Unpacking, set-up or installation, adjustment of customer operated controls, user
instruction.
D. Any product with Serial Numbers altered or removed.
E. New products purchased or service performed outside of the continental United
States or its possessions.
F. Product used for a commercial or industrial purpose.
NO PERSON, AGENT, DISTRIBUTOR, DEALER, SERVICE FACILITY, OR COMPANY
IS AUTHORIZED TO CHANGE, MODIFY, OR AMEND THE TERMS OF THIS LIMITED
WARRANTY IN ANY MANNER OR FASHION WHATSOEVER, EXCEPT AND TO THE
EXTENT PROVIDED IN THIS LIMITED WARRANTY, HITACHI MAKES NO EXPRESS
WARRANTY REGARDING THIS HITACHI PRODUCT. FURTHER, ALL IMPLIED
WARRANTIES RELATING TO ANY PORTION OF THIS PRODUCT, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO 90 DAYS FOR LABOR AND TWO YEARS FOR PARTS, THE
DURATION OF THE APPLICABLE EXPRESS WARRANTY CONTAINED ABOVE
HITACHI SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY OTHER
PERSON FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS OF
PROFIT OR PRODUCT RESULTING FROM ANY DEFECT IN OR MALFUNCTION OR
FAILURE OF THIS HITACHI PRODUCT. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE
EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
Important Notice:
Retain your sales receipt for warranty purposes. Please complete the section below for
your records as it may be needed in the event of loss.
Attach sales receipt to this card.
VIDEO PRODUCTS LIMITED WARRANTY REGISTRATION
60
HITACHI WARRANTY CARD (Front)
CANADA ONLY
(for your record)
Model No.
Serial No.
Date of Purchase
Dealer Name
Dealer Address
City
State
Zip
HITACHI
HITACHI WARRANTY CARD (Front)
CANADA ONLY
NOT VALID IN U. S. A.
HITACHI
VIDEO PRODUCTS GOLD CARD WARRANTY
* See inside for the GOLD CARD advantages and how to get it.
HITACHI
EXCEPTIONAL PERFORMANCE
HITACHI (HSC) CANADA INC.
3300 Trans Canada Highway, Pointe Claire, Quebec H9R 1B1
IMPORTANT NOTICE: This warranty will not apply to products purchased outside of
Canada OR sold by any organization other than HITACHI (HSC) CANADA INC.
PROTECTION PLAN CONDITIONS
A - This contract is exclusively for products manufactured and sold by Hitachi (HSC)
Canada Inc., hereinafter called "Hitachi", purchased in Canada from a dealer duly
accredited by Hitachi. The program is available only for products covered by an original
validated Hitachi warranty given at the time of the purchase.
B - Hitachi will make repairs to the product mentioned in this plan, parts and labour
charges included, until the expiry date of this plan.
61
HITACHI CANADA WARRANTY CARD (Back)
C - THIS PROTECTION PLAN WILL BE IN FORCE ONLY AFTER EXPIRATION OF
THE NORMAL PURCHASER'S WARRANTY. During the normal warranty the only valid
proof required for servicing the product is the Hitachi GOLD CARD or the bill of
purchase. The Protection Plan Card cannot be used as proof of warranty.
Only after the expiration of the normal warranty, the owner can have the product
repaired, without charge at any authorized Hitachi Service Center upon presentation of
the Protection Plan Card.
D - This Protection Plan is applicable to the product mentioned excluding the
accessories such as cables, batteries, etc.
E - THIS PROTECTION PLAN DOES NOT COVER:
(1) Damage caused by incorrect use or negligence, unauthorized alteration, improper
storage or repairs done by an unauthorized service depot;
(2) Damage caused by fire, flood, lightning, acts of God or other events beyond the
control of Hitachi;
(3) External parts such as the cabinet, knobs, remote control case, antenna, cords,
etc....;
(4) Any repairs if the product is used for rental or other commercial use.
(5) Any repairs done outside Canada;
(6) Repairs due to damage in transit, improper handling by carrier or improper packing
by the owner (specifically applicable in the case of the product having to be shipped by
the owner);
(7) In Home service. All video products must be brought to the Service Center for
repairs;
(8) Original installation and any subsequent reinstallation or any transformation of the
product;
(9) The replacement of the video camera pick-up element, if the pick-up element has
been over exposed to an intense source of light;
(10) Cleaning the video heads.
F - All repair costs must be claimed from Hitachi, at all times, through an authorized
Hitachi Service Center. The Plan Owner should never directly pay the authorized
Service center unless given special authorization from Hitachi. No repair costs will be
reimbursed directly to the Plan Owner.
G - The Plan Owner will receive a PLATINUM CARD which is the only valid document
to be presented at the time of repair to an authorized Hitachi Service Center. THIS
PROTECTION PLAN IS NOT TRANSFERABLE NOR REFUNDABLE.
H - This Protection Plan can be renewed as long as the request is made before the
expiry date of the Plan. Hitachi, however, reserves the right to refuse any renewal.
I - Hitachi reserves the right to cancel the Protection Plan in case of abuse by the
owner, in such case, Hitachi will reimburse the owner the portion of the plan cost, based
on the period used.
J - This plan does not constitute an insurance policy. It is the owner's responsibility to
insure for loss of the product and for any damages which might occur and for loss or
damages to any other object and for personal or property liability caused directly or
indirectly by the product.
HITACHI CANADA WARRANTY CARD (Back)
62
HITACHI CANADA WARRANTY CARD (Back)
Hitachi VIDEO PRODUCTS are guaranteed to be free from defects in workmanship and
material. If any failure resulting from either workmanship or material defect should
occur under normal and proper usage within the period stated hereunder from the
original provable date of purchase, such failure should be repaired at no cost to the
buyer, provided the defective product is brought to a HITACHI AUTHORIZED SERVICE
CENTER in Canada.
NOTE: The GOLD CARD becomes the proof of your warranty. it assures you of a
personalized quality service and it is accepted by our authorized service centres
everywhere in Canada.
However, to receive your exclusive Hitachi GOLD CARD, you must include a copy of
your bill of sale with the return portion of this warranty registration card.
"GOLD" WARRANTY PERIOD
Video Tape Recorder, Tuner, Timer, 1 year parts and labour.
Camera, camcorder, AC Adaptor, Charger, 1 year parts and labour.
All goods returned to either Hitachi or a Hitachi Authorized Service Center must be
shipped on a "PREPAID BASIS". To avoid any damage to the returned goods, please
ensure that proper packaging procedures are followed. A short written description of
the problem along with proof of warranty should accompany the product returned for
repair. Only products under warranty will be returned on a no-charge basis to the
customer. The customer is responsible for all transport costs if the product is no longer
under warranty.
WARRANTY DOES NOT COVER
1. Products received for repair without sales or delivery receipt showing date of
purchase by the original customer.
2. Damages caused by incorrect use, carelessness, unauthorized alterations, improper
storage or unauthorized service or repairs.
3. Damage caused by fire, flood, lightning, acts of God, or other events beyond the
control of Hitachi.
4. Batteries, tape cassettes, earphones, antennas, accessories and external parts such
as cabinet and knobs.
5. PRODUCTS PURCHASED OUTSIDE CANADA.
6. Products used outside Canada
7. In transit damage claims, improper handling by carrier or post offices.
8. Products or parts thereof which have had serial numbers removed, altered or
defaced.
63
HITACHI CANADA WARRANTY CARD (Back)
9. Products used for commercial purposes.
10. ***PRODUCTS USED FOR RENTAL***
11. In home service at the customer's location.
12. Original installation (set-up) and all normal maintenance needed such as
CLEANING OF VIDEO HEADS.
13. The replacement of the video camera pickup element if the pickup element has
been OVER EXPOSED to an intense source of light.
14. Products sold in Canada by any organization other than HITACHI (HSC) CANADA
INC.
IMPORTANT: This warranty is in lieu of all other warranties, guarantees, or
agreements whether express or implied, and no person, dealer or company is
authorized to change, modify, or extend its terms in any manner whatsoever.
HITACHI WARRANTY REGISTRATION (for your records)
Model No.
Serial No.
Date of Purchase
Dealer's Name
Dealer's Address
City
Province
64
HITACHI CANADA WARRANTY CARD (Back)
18HITACHI
Instruction Manual
8mm Video Camcorder
VM-E410A/ VM-E510A
Hitachi Home Electronics (America),
HITACHI (HSC) CANADA, INC.
Inc.
3300 Trans Canada Highway, Pointe
Claire,
3890 Steve Reynolds Blvd., Norcross, GA 30093
Tel. 404-279-5600
Quebec, H9R1B1, CANADA
Tel. 514-697-9150
HITACHI SALES CORPORATION OF
HAWAII, INC
3219 Koapaka Street, Honolulu, Hawaii 96819
Tel. 808-836-3621
Thank you for buying a Hitachi product. You've chosen the best 8 mm video camcorder
for you, and we want to help you make the most of your purchase. Please take time to
become familiar with the manual and how it is set up. Keep it handy for feature
reference.
QR12522 © Hitachi, Ltd. 1995
Printed in Japan KG-M(N)
65
HITACHI CANADA WARRANTY CARD (Back)
66
|