HP (Hewlett Packard) HP 19 INch LCD Monitor LP1965 User Manual |
QuickSpecs
HP LP1965 19-inch LCD Monito
Overview
1. Menu/select: Opens, selects or exits the OSD menu.
4. Input select: Select video input (DVI-D or VGA)
"-"/Auto: Navigates backward through the OSD menu and 5. Power LED: fully powered = green; sleep mode = amber;
decreases adjustment levels; when the OSD menu is inactive,
activates the auto adjustment feature to optimize the screen
image.
"+": Navigates forward through the OSD menu and increases 6. Power: Turns the monitor on or off.
adjustment levels.
sleep timer mode = flashing amber.
2.
3.
Models
Business Desktops
Two-tone silver and carbonite
Carbonite
RA374AA#xxx
RA373AA#xxx
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 1
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications
Preset VGA Mode
640 x 480 @ 60 Hz, 72 Hz
1152 x 900 @ 76 Hz
Preset SUN Mode
Fail Safe Mode
Yes (limits out of range signal messages)
140 MHz
Maximum Pixel Clock
Speed
User Programmable
Modes
Yes, 15
Anti-Glare
Anti-Static
AssetControl
Yes
Yes
Yes (accessible on HP Compaq Business Desktops featuring Intelligent
Manageability)
Default Color Temperature Yes (6500k, 9300k, SRGB, Custom User)
On Screen Display (OSD) Buttons or Switches Power on/off; 3-button OSD; second level OSD buttons include dual-input
Controls
switch, dedicated auto adjust switch
Languages
English, Spanish, French, German, Netherlands, Italian, Japanese, Simplified
Chinese
User Controls
Size and Positioning
Contrast
Brightness
Clock, Clock Phase
Selectable Color Temperature
Serial Number
Mode Displayed
Sleep Timer
Input Selection
Factory Reset
Power
Power Supply
Input Power
Auto-ranging, 90 to 265 VAC; internal power supply
100 ~ 240 VAC
1.5 A maximum
Nominal Current
Frequency
50 ~ 60 Hz
Typical Power
Consumption
< 35 watts
Maximum
< 55 watts
Power Saving
Off Mode
< 2 watts
0 watts (when master power switch is in the off position)
74.8 in (1.9 m); non-captive
Power Cable Length
Mechanical
Dimensions
(H x W x D)
Unpacked w/stand
14.85 min to 18.79 max x 15.9 x 8.78 inches
(37.72 min to 47.72 max x 40.39 x 22.29 cm)
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 3
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications
Base area
8.78 x 11.88 inches (22.29 x 30.18 cm)
(Footprint D x W)
Display head only
12.96 x 15.9 x 2.4 inches (32.91 x 40.39 x 6.1
(Without stand) (H x W x cm)
D)
Weight
Unpacked w/stand
15.6 lbs (7.06 kg)
Unpacked w/o stand 9.26 lbs (4.19 kg)
Packaged
20.5 lbs (9.27 kg)
Bezel width
Tilt Range
12.5 mm left and right, 12.75 mm top and bottom
-4 degrees to +30 degrees
Swivel Range
Height Adjustable
Pivot Rotation
Base
± 45 degrees horizontal swivel
Yes (4 in/100mm adjustment range)
Yes, 90 degrees
Ships attached and is removable
Environmental
Temperature – Operating 41° to 95° F (5° to 35° C)
Temperature –
Non-operating
-4° to 140° F (-20° to 60° C)
Humidity – Operating
20% to 80%
5% to 95%
Humidity –
Non-operating
Altitude – Operating
0 to 12,000 ft (0 to 3,658 m)
0 to 40,000 ft (0 to 12,192 m)
Altitude –
Non-operating
Environmental Data
Eco-Label Certifications
and Declarations
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these marks:
ENERGY STAR®
CECP
EPEAT™ Silver
Energy Consumption(in
AC Input Voltage at 100 AC Input Voltage at 115 AC Input Voltage at 230
accordance with ENERGY VAC +/- 5 VAC, 50 Hz VAC +/- 5 VAC, 60 Hz VAC +/- 5 VAC, 50 Hz
STAR® test method)
Normal Operation
Sleep
+/- 3 Hz
+/- 3 Hz
+/- 3 Hz
35.7 watts
1.08 watts
0.93 watts
35.6 watts
1.14watts
0.94 watts
35.1 watts
1.23 watts
0.92 watts
Off
3
Heat Dissipation
100 VAC, 50 Hz
121.7 BTU/hr
3.68 BTU/hr
115 VAC, 60 Hz
121.4 BTU/hr
3.89 BTU/hr
230 VAC, 50 Hz
119.7 BTU/hr
4.19 BTU/hr
Normal Operation
Sleep
Off
3.17 BTU/hr
3.21 BTU/hr
3.14 BTU/hr
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 4
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications
Longevity and Upgrading Upgradeability features contained in the product include:
One upstream and four downstream USB ports
Ergonomics
The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat
panel displays.
Additional Information
This product is in compliance with the Restrictions of Hazardous Substances
(RoHS) Directive, 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive, 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the
Plastics parts weighing over 25 grams used in the product are marked per
ISO 11469 and ISO1043.
Display meets the requirement for low frequency electromagnetic fields per
TCO and prEN50279 A/B/C.
This product contains 0% recycled materials (by wt.)
This product is 98.6% recyclable when properly disposed of at end of life.
Packaging Materials
Corrugated – 0.955 kg
Plastic (other) – 0.055 kg
Polystyrene – 0.24 kg
Material Usage
This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 5
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications
Mercuric Oxide Batteries
Nickel – finishes must not be used on the external surface designed to
be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) – except for wires and cables, and certain
retail packaging has been voluntarily removed from most applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and
DIN 6120 standards.
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return and recycling programs in
many geographic areas. To recycle your product, please go to:
www.hp.com/recycle or contact your nearest HP sales office. Products
returned to HP will be recycled, recovered or disposed of in a responsible
manner.
Hewlett-Packard
For more information about HP's commitment to the environment:
Corporate Environmental Global Citizenship Report
Information
Eco-label certifications
ISO 14001 certificates:
Options
HP Silver LCD Speaker
Bar—Part number:
EE418AA
Powered directly by the monitor or PC, seamlessly attaches to the monitor's
bezel to bring full multimedia support to select HP flat panel monitors.
Features include dual speakers with full sound range and external jack for
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 6
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications
headphones. Sold separately. For more information, refer to the product's
QuickSpec.
HP Integrated Work
Center Stand—Part
number: GN783AA
Allows mounting of the monitor and an HP Compaq dc7800 or dc7900
Ultra-slim Desktop PC or HP t5000 series Thin Client on a single stand for the
convenience of an "all-in-one" form factor. Sold separately. For more
information, refer to this product's QuickSpec document.
HP Security Lock—Part
number PC766A
Combines aircraft-grade steel and Kevlar fiber to securely lock down your
monitor and help prevent theft.
Other
Accessories Included
One DVI-D to DVI-D cable, one DVI-I to VGA cable, one USB cable, and CD-
ROM with Pivot Pro software, HP Display Assistant software, and HP Display
LiteSaver software.
Software
Pivot Pro software from Portrait Displays, Inc. interacts with your PC's native
graphics driver to enable seamless portrait screen redraws with a simple
mouse-click or keyboard command. Pivot Pro supports 90-degree portrait and
landscape views. Language support is available in English, Japanese,
French, German, Spanish, Italian, and Traditional and Simplified Chinese.
HP Display Assistant is a software utility that allows monitor adjustment, color
calibration, and security/asset management using the Display Data Channel
Command Interface (DDC/CI) protocol of the connected desktop PC.
HP Display LiteSaver feature allows you to schedule Sleep mode at preset
times to help protect the monitor against image retention, drastically lower
power consumption and energy costs, and extend the lifespan of the monitor.
User Guide Languages
English, Bahasa, B. Portuguese, French, LA Spanish, Korean, Simplified
Chinese, Traditional Chinese, Japanese, Danish, Dutch, Finnish, German,
Italian, Norwegian, Swedish, Greek, Polish, Russian, Slovenian, Turkish
Warranty Languages
Color
English
Carbonite, two-tone carbonite and silver (EMEA only)
VESA Mounting
Yes (swing arm/wall mount not included); base must be removed for
mounting options)
VESA External Mounting Yes (standard 4 hole pattern, 100 mm)
Security Lock-ready Yes
Certification and
Compliance
Australian ACA Approval, Canadian Requirements/CSA, CE Marking, China
CCIB/CCEE Approval, CISPR Requirements, Eastern European Approvals,
ENERGY STAR® qualified, FCC Approval, German Ergonomic (TUV and GS
Mark), ISO 13406-2 Compliant (Pixel Defect Guidelines), Mexican NOM
Approval, PC99 Certified, S. Korean MIC Approval, Taiwan BSMI Approval,
TCO 99 or 03 depending on region (emissions, ergonomics, environment),
TUV-Ergo, UL Listed, VCCI Approvals, Microsoft® Windows® Certification,
Windows Vista® Premium Certification, EPEAT™ Silver™
Compatibility
VESA Video Signal Standard (VSIS) Compliant video cards have been tested and proven compatible for
use with the HP LP1965 19-inch LCD Monitor. Recommended for use with HP products.
Service and Warranty
Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement
options may include second business day on-site service, or next business day direct replacement, at HP's
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 7
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications
4
sole discretion. With direct replacement, HP will ship a replacement display product directly to you.
Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as
the replacement. Certain restrictions and exclusions apply. For details see your product warranty or
contact HP Customer Support.
1
All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance
may vary either higher or lower.
2
20 ms rise and fall.
3
Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour.
HP Care Pack Services extend service contracts beyond the standard warranties. Service starts from date of hardware purchase. To
4
choose the right level of service for your HP product, use the HP Care Pack Services Lookup Tool at www.hp.com/go/lookuptool.
Additional HP Care Pack Services information by product is available at www.hp.com/hps/carepack. Service levels and response
times for HP Care Packs may vary depending on your geographic location.
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 8
QuickSpecs
HP LP1965 19-inch LCD Monito
Overview - HP LCD Monitor Quick Release
1. Release/locking
1. Four 100 mm VESA mount screw holes 1. Locking pin screw
2. Four 100 mm VESA mount screw holes
3. Mounting holes for attachment to back
of HP LP1965, LP2065, and HP
LP2465 monitor stands
2. Locking pin hole on release/locking arm
Introduction
The HP Quick Release, which ships standard with the HP LP1965 19-inch LCD Monitor, is an easy to use, 100 mm VESA-compliant,
flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety of stands, brackets,
arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that are compatible with the 100
mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps the monitor (or mounted device)
securely in place, and can be further secured with a theft-deterrent security screw.
Uniquely flexible product configurations
HP Quick Release enables uniquely flexible product configuration alternatives in a variety of settings, such as:
Storefronts/kiosks: Mount flat panel monitors for easy viewing and add touchscreens for interactivity.
Trade shows: Securely mount LCD TVs or monitors in common areas and quickly remove them for safekeeping at the end of the
day.
Front office environments: Minimize desk space requirements with wall or swing-arm mounting of monitors in reception areas.
Training labs: Mount a monitor directly on a 100 mm VESA-compatible PC or an HP Thin Client for all-in-one convenience.
Medical/institutional settings: Securely mount monitors in nursing stations and public areas.
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 9
QuickSpecs
HP LP1965 19-inch LCD Monito
Overview - HP LCD Monitor Quick Release
Conference rooms: Mount projectors (with 100 mm VESA-compliant pre-drilled holes) on ceilings, and monitors on walls or
tables.
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 10
QuickSpecs
HP LP1965 19-inch LCD Monito
Technical Specifications - HP LCD Monitor Quick Release
Mechanical
Dimensions
(H x W x D)
Packaged
7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)
6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)
1.1 lb (0.49 kg)
Unpackaged
Packaged
Weight
Unpackaged
0.82 lb (0.37 kg)
Additional components
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
Color
Notes
Carbonite
1.
2.
No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
The Quick Release device is not to be used between a monitor screen and its stand unless
provided that way from the factory.
3.
Under no circumstances is the Quick Release device intended to be used in an orientation where
the Release/Lock lever is oriented downward.
Supported weight
capacity
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending
upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e.
the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24
pounds. Because mounting surfaces vary widely and the final mounting method and configuration may
vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that
you consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that your
mounting solution is properly installed to support applied loads.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows
Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY
STAR is a registered mark owned by the U.S. government.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 12620
Worldwide — Version 10 — December 15, 2008
Page 11
|