Fujitsu 560H User Manual

MEMORY CARD CONNECTORS  
(PCMCIA CONFORMABLE)  
560H SERIES  
FEATURES  
• The connectors conform to the Japan Electronic Industry  
Development Association (JEIDA) and Personal  
Computer Memory Card International Association  
(PCMCIA) standards Ver. 4.  
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).  
Incorrect insertion is prevented. Hot system plugging is  
possible (contact detection).  
• Plugs have an easy-to-use ejection mechanism.  
• Raised mounting type connectors (under which  
components can be mounted) and low-profile connectors  
are available.  
• In addition to connectors for type I and type II cards, a  
connector for type III cards has been provided.  
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided  
mounting are available.  
PIN CONNECTOR (PLUG) CONTACT LENGTH  
SPECIFICATIONS  
Contact type  
Pin No.  
Contact length  
Specification  
Item  
Power, ground pins 1, 17, 34, 35, 51, 68 5.0 mm (0.196 in.)  
– 55°C to + 85°C  
Operating temperature range  
Current rating  
Card detection pins  
Other signal pins  
36, 67  
Others  
3.5 mm (0.137 in.)  
4.25 mm (0.167 in.)  
DC 0.5 A  
AC 250 V  
Voltage rating  
40 mmax (6 VDC, 0.1 A)  
1000 Mmin. (500 VDC)  
500 VAC for 1 minute  
Industrial environment: 5,000 times  
Office environment: 10,000 times  
Contact resistance  
MATERIALS  
Insulation resistance  
Dielectric withstanding voltage  
Insertion/withdrawal life  
Specification  
Item  
Plug body: PPS resin UL94V-0  
: 6T nylon (for type III card connector) UL94V-0  
Ejector: Polyester  
Insulating material  
:
PPS resin (for SMT and type III card connectors)  
Copper alloy  
Conductor  
Plating  
Contact: Gold over palladium over nickel  
(PAGOS)  
Terminal: Palladium  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
1
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)  
SUPPORTS TYPE I, II CARDS  
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
Part number: FCN-565P068-G/C-V4  
3 (0.118)  
50.8 (2)  
2.5mm (0.098)  
deep spot facing  
41.91 (1.65)  
2- ø 2.8 (0.110)  
1.27 (0.05)  
59.7(2.35)  
50.8 (2)±0.1 (0.0039)  
No.1  
No.2  
41.91 (1.65)  
41.91 (1.65) ±0.1 (0.0039)  
1.27 (0.05) ±0.05 (0.0020)  
No.3  
7 (0.276)  
1.27 (0.05)  
No.17  
No.1  
No.34  
No.51  
1.905 (0.075)±0.05 (0.0020)  
No.68  
3.810 (0.15)±0.05 (0.0020)  
5.715 (0.225)±0.05 (0.0020)  
68- ø 1 (0.039)±0.05 (0.0020)  
2- ø 2.8 (0.110)±0.1 (0.0039)  
(Card insertion side)  
No.68 Unit: mm (in.)  
No.35  
Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)  
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)  
• Long-terminal models are also available.  
Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))  
FCN-565P068-G/02-V4 (10 mm (0.394 in.))  
Part number: FCN-565P068-G/17-V4  
• Models which support Type III are also available.  
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm  
(0.063 in.) thick PC board )  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE)  
SUPPORTS TYPE I, II CARDS  
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
Part number: FCN-565P068-G/01-V4  
50.8 (2)  
3
(0.118)  
4
2.5mm (0.098)  
deep spot facing  
1.27 (0.05) × (34-1) = 41.91 (1.65)  
(0.157)  
1.27 (0.05)  
3.6 (0.141)  
58.7 (2.31)  
50.8 (2) ±0.1 (0.0039)  
1.27 (0.05) × (34-1) = 41.91 (1.65)  
No.1  
No.2  
41.91(1.65)±0.1 (0.0039)  
1.27 (0.05) ±0.05 (0.0020)  
No.3  
1.27 (0.05)  
No.1  
No.34  
1.905 (0.075) ±0.05 (0.0020)  
No.68  
3.810 (0.15) ±0.05 (0.0020)  
5.715 (0.225) ±0.05 (0.0020)  
No.35  
No.68  
68- ø 1 (0.039)±0.05 (0.0020)  
2- ø 2.8 (0.110)±0.1 (0.0039)  
(Card insertion side)  
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.  
In order to avoid damage to the connector, do not pull out the card at an angle.  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
3
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON  
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS  
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
Part number: FCN-565P068-G/F-V4  
(2) M2.5 (0.098 in.)  
thread nut  
59.7 (2.35)  
50.8 (2)  
7 (0.276)  
1.27 (0.05) × (34 – 1) = 41.91 (1.65)  
2.5  
1.27 (0.05)  
(0.098)  
<To be mounted on back of PC board>  
50.8 (2)±0.05 (0.0039)  
1.27 (0.05) × (68/2-1) =  
41.91 (1.65)±0.1 (0.0039)  
1.27 (0.05)±0.05 (0.0020)  
No.68  
No.35  
1.27 (0.05) × (34 – 1) = 41.91 (1.65)  
1.27 (0.05)  
No.68  
No.51  
No.35  
No.34  
2- ø 2.8 (0.110)  
No.1  
1.905 (0.075)±0.05 (0.0020)  
3.810 (0.15)±0.05 (0.0020)  
5.715 (0.225)±0.05 (0.0020)  
68- ø 1 (0.039)±0.05 (0.0020)  
No.34  
No.17  
No.1  
(Card insertion side)  
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4  
Unit: mm (in.)  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING  
TYPE) SUPPORTS TYPE I, II CARDS  
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)  
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)  
3 (0.118)  
59.7 (2.35)  
50.8 (2)  
4.5 (0.177)  
50.8 (2) ±0.1 (0.0039)  
No.1  
No.2  
7 (0.276)  
1.27 (0.05) × (34 – 1) = 41.91 (1.65)  
41.91 (1.65) ±0.1 (0.0039)  
1.27 (0.05) ±0.05 (0.0020)  
No.3  
1.27 (0.05)  
No.1  
No.17  
No.34  
No.68  
8.5  
1.905 (0.075)±0.05 (0.0020)  
3.810 (0.15)±0.05 (0.0020)  
5.715 (0.225)±0.05 (0.0020)  
±0.05 (0.0020)  
68- ø 1 (0.039)  
2- ø 2.8 (0.110)±0.1 (0.0039)  
No.35  
53.7 (2.114)  
No.51  
No.68  
(Card insertion side)  
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)  
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
4
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)  
SUPPORTS TYPE I, II CARDS  
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
Part number: FCN-565P068-G/A-V4  
50.8 (2)  
2.5mm (0.098)  
deep spot facing  
1.27 (0.05) × (34–1) = 41.91 (1.65)  
3 (0.118)  
4.5 (0.177)  
1.27 (0.05)  
50.8 (2)±0.1 (0.0039)  
59.7 (2.35)  
1.27 (0.05) × (68/2-1) =  
No.1  
No.34  
41.91 (1.65)±0.1 (0.0039)  
6 (0.236)  
±0.05 (0.0020)  
1.27 (0.05)  
1.27 (0.05) × (34–1) = 41.91 (1.65)  
1.27 (0.05)  
No.17  
No.68  
No.1  
No.34  
No.35  
1.905 (0.075)±0.05 (0.0020)  
3.810 (0.15)  
5.715 (0.225)±0.05 (0.0020)  
68- ø 1 (0.039)±0.05 (0.0020)  
2- ø 2.8 (0.110)±0.1 (0.0039)  
±0.05 (0.0020)  
No.35  
No.51  
No.68  
Unit: mm (in.)  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)  
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
Part number: FCN-565P136-G/0-V4  
59.7 (2.35)  
7
7
(0.276) (0.276)  
50.8 (2)  
50.8 (2) ±0.1 (0.0039)  
1.27 (0.05) × (68/2-1)  
No.1  
±0.1 (0.0039)  
= 41.91 (1.65)  
No.1  
No.35  
No.35  
±0.05 (0.0020)  
1.27 (0.05)  
No.34  
No.68  
No.34  
No.68  
No.34  
No.68  
No.34  
No.68  
No.1  
No.35 136- ø 1 (0.039) ±0.05 (0.0020)  
No.1  
No.35  
2- ø 2.8 (0.110)±0.1 (0.0039)  
1.905 (0.075)±0.05 (0.0020)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
5
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE)  
SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/C34-V4  
7
(0.276)  
3 (0.118)  
59.7 (2.35)  
50.8 (2)  
2.5mm (0.098)  
deep spot facing  
59 (2.32)  
No.1  
No.34  
Unit: mm (in.)  
No.35  
No.68  
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
50.8 (2) ±0.1 (0.0039)  
1.27 (0.05) × (68/2-1)  
±0.1 (0.0039)  
= 41.91 (1.65)  
No.1  
No.34  
1.27 (0.05) ±0.05 (0.0020)  
2- ø 2.8 (0.110)±0.1 (0.0039)  
5.715 (0.225) ±0.05 (0.0020)  
68- ø 1 (0.039) ±0.05 (0.0020)  
±0.05 (0.0020)  
3.810 (0.15)  
1.905 (0.075) ±0.05 (0.0020)  
No.35  
No.68  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
6
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)  
SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)  
Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)  
Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)  
67.31 (2.65)  
7 (0.276)  
3 (0.118)  
59.7 (2.35)  
50.8 (2)  
2.5mm (0.098)  
deep spot facing  
34 (1.339)  
4.8 (0.189)  
10 (0.394)  
78.5 (3.091)  
59 (2.323)  
42 (1.654)  
35.5 (1.398)  
No.17 No.18 No.34  
No.1  
Unit: mm (in.)  
No.35  
No.51 No.52  
No.68  
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,  
instead of FCN-565P068-G/XC-V4.  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
50.8 (2)±0.1 (0.0039)  
No.1  
41.91 (1.65)±0.1 (0.0039)  
1.27 (0.05)±0.05 (0.0020)  
No.2  
2- ø 2.8 (0.110)±0.1 (0.0039)  
No.3  
No.68  
34 (1.339)±0.05 (0.0020)  
67.31 (2.65)~68.0 (2.677)  
(Card insertion side)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
7
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)  
SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/MC-V4 (Button color: Black)  
Part number: FCN-565P068-G/C22-V4 (Button color: Beige)  
67.31 (2.65)  
7 (0.276)  
3 (0.118)  
59.7 (2.35)  
50.8 (2)  
2.5mm (0.098)  
deep spot facing  
34 (1.339)  
4.8 (0.189)  
10 (0.394)  
78.5 (3.091)  
59 (2.323)  
42 (1.654)  
35.5 (1.398)  
No.1 No.17 No.18  
No.34  
Unit: mm (in.)  
No.35  
No.51 No.52  
No.68  
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of  
FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
50.8 (2)±0.1 (0.0039)  
No.1  
41.91 (1.65) ±0.1 (0.0039)  
1.27 (0.05)±0.05 (0.0020)  
No.2  
2- ø 2.8 (0.110)±0.1 (0.0039)  
No.3  
No.68  
34 (1.339)±0.05 (0.0020)  
67.31 (2.65)~68.0 (2.677)  
(Card insertion side)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
8
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE  
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/XF-V4 (Button color: Black)  
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)  
67.31 (2.65)  
7 (0.276)  
2.5  
59.7 (2.35)  
50.8 (2)  
2.5mm (0.098)  
deep spot facing  
34 (1.339)  
4.8 (0.189)  
10 (0.394)  
78.5 (3.091)  
59 (2.323)  
42 (1.654)  
35.5 (1.398)  
No.35  
No.68  
No.34  
Unit: mm (in.)  
No.1  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
MOUNTING EXAMPLE  
50.8 (2)±0.1 (0.0039)  
1.27 (0.05) × (68/2-1) = 41.91 (1.65)±0.1 (0.0039)  
1.27 (0.05) ±0.05 (0.0020)  
No.35  
Nut buried  
No.34  
No.1  
34 (1.339) ±0.05 (0.0020)  
67.31 (2.65)~68.0 (2.677)  
Regardless of how the connector is mounted on the PC  
board, a card can be inserted with its face upward.  
Ejector button  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
9
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK  
MOUNTING TYPE) SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/W-V4  
67.31 (2.65)  
59.7 (2.35)  
50.8 (2)  
3 (0.118)  
4.5  
2- ø 2.8 (0.110)  
(0.177)  
34 (1.339)  
6 (0.236)  
2.5 (0.098)  
2.1  
(0.083)  
5 (0.197)  
3 (0.118)  
10 (0.394)  
42 (1.654)  
35.5 (1.398)  
78.5 (3.091)  
No.1  
No.17  
No.34  
No.68  
Unit: mm (in.)  
No.35  
No.51  
2.5 (0.098)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
50.8 (2)±0.1(0.0039)  
No.1  
No.2  
41.91 (1.65)±0.1 (0.0039)  
1.27 (0.05) ±0.05 (0.0020)  
No.3  
±0.05 (0.0020)  
5.715 (0.225)  
2- ø 2.8 (0.110) ±0.1(0.0039)  
68- ø 1 (0.039) ±0.05 (0.0020)  
3.810 (0.15) ±0.05 (0.0020)  
1.905 (0.075) ±0.05 (0.0020)  
Unit: mm (in.)  
No.68  
(Card insertion side)  
MOUNTING EXAMPLE  
Nut  
Mounting height  
4.5mm(0.177in.)  
Nut  
M2.5 screw  
Unit: mm (in.)  
The connector is mounted on a PC board so that only its terminal connection part rests on the board.  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
10  
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM  
(0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/J25-V4 (supports type I, II card)  
Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)  
59.7 (2.35)  
3(0.118)  
50.8 (2)  
4.5 (0.177)  
4.8 (0.189)  
10 (0.394)  
59 (2.323)  
8 (0.315)  
42 (1.654)  
35.5 (1.398)  
No.1  
No.34  
Unit: mm (in.)  
No.35  
No.68  
8 (0.315)  
50.8 (2)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
MOUNTING EXAMPLE  
50.8 (2)±0.1 (0.0039)  
No.1  
1.27 (0.05) × (68/2-1)  
No.34  
±0.1 (0.0039)  
= 41.91 (1.65)  
1.27 (0.05) ±0.05 (0.0020)  
No.68  
68- ø 1 (0.0394) ±0.05 (0.0020)  
No.35  
4 - ø 2.8 (0.110) ±0.1 (0.0039)  
51.7 (2.035) +0  
–0  
61.7 (2.429)  
• Components with a height of 4.3 mm (0.169 in.) maximum can  
be installed under the connector.  
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws  
(when a 1.6 mm (0.063 in.) thick PC board is used) to mount  
the connector to the board.  
41.7 (1.642) +0  
±0.1 (0.0039)  
50.8 (2)  
Unit: mm (in.)  
–0  
61.7 (2.429)  
Component mounting is prohibited in the hatched areas.  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
11  
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm  
(0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/0442-E4 (with FG clip)  
Part number: FCN-565P068-G/0426-V4 (with no FG clip)  
3 (0.118)  
5 (0.197)  
59.7 (2.35)  
50.8 (2)  
3 (0.118)  
5 (0.197)  
59.7 (2.35)  
50.8 (2)  
12.9  
12.9  
4.8 (0.189)  
4.8 (0.189)  
10 (0.394)  
10 (0.394)  
71.85 (2.83)  
59 (2.32)  
1.2 (0.047)  
71.85 (2.83)  
59 (2.32)  
1.2 (0.047)  
8.5  
(0.335)  
8.5  
(0.335)  
42 (1.654)  
35.5 (1.398)  
No.34  
42 (1.654)  
35.5 (1.398)  
No.34  
No.1  
No.1  
No.35  
No.68  
No.35  
22 (0.866)  
No.68  
34 (1.339)  
22 (0.866) 34 (1.339)  
57.51 (2.26)  
Unit: mm (in.)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
61.7 (2.43) –0  
61.7 (2.43) –0  
50.8 (2) ±0.1 (0.0039)  
50.8 (2) ±0.1 (0.0039)  
1.27 (0.05) × (68/2–1)  
= 41.91 (1.65) ±0.1 (0.0039)  
1.27 (0.05) × (68/2-1)  
= 41.91 (1.65) ±0.1 (0.0039)  
1.27 (0.05) ±0.05 (0.0020)  
1.27 (0.05) ±0.05 (0.0020)  
2.  
2.  
34 (1.339)±0.1 (0.0039)  
22 (0.866) ±0.1 (0.0039)  
57.15 (2.25)±0.1 (0.0039)  
34 (1.339)±0.1 (0.0039)  
22 (0.866)±0.1 (0.0039)  
2. Component mounting is prohibited in the  
2. Component mounting is prohibited in the  
Unit: mm (in.)  
hatched areas.  
hatched areas.  
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is  
used) to mount the connector to the board.  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
12  
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.)  
RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS  
DIMENSIONS  
Part number: FCN-565P068-G/J38-E4  
3 (0.118)  
67.31 (2.65)  
59.7 (2.35)  
50.8 (2)  
34 (1.34)  
SMT•FG Clip  
4.8 (0.189)  
10 (0.394)  
78.5 (3.09)  
59 (2.32)  
8 (0.315)  
42 (1.65)  
35.5 (1.40)  
No.1  
No.34  
No.35  
No.68  
2 (0.079)  
Unit: mm (in.)  
28.45 (1.12)  
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
50.8 (2) ±0.1 (0.0039)  
1.27 (0.05) × (68/2-1)  
No.1  
= 41.91 (1.65) ±0.1 (0.0039)  
No.34  
1.27 (0.05)±0.05 (0.0020)  
No.68  
No.35  
4 (0.157) ±0.1 (0.0039)  
34 (1.34)±0.05 (0.002)  
67.31 (2.65)~68.0 (2.68)  
29.45 ±0.1 (0.0039)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
13  
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.)  
RAISED TYPE, WITH ESD CLIPS  
DIMENSIONS  
Part number: FCN-565P068-G/0221-E4  
83.38 (3.28)  
40 (1.57)  
11  
(.433)  
35.2 (1.39)  
11.2 (.441)  
1.8  
(.071)  
R1.4  
40 (1.574)  
1 (.039)  
1 (.039)  
11 (.433)  
8 (.315)  
5 (.197)  
10.5 (.413)  
0.51(0.020)  
1.905 (0.075)  
3.810 (0.150)  
5.715 (0.225)  
Unit: mm (in.)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
40±0.1 (1.57±.002  
)
6-0 (.236-0)  
5-0(.197-0)  
4.4-0 (.173-0)  
9.5-0 (.347-0)  
Note 3  
PCB Foot Print Viewed  
from Connector Side  
NOTE 2  
NOTE 3  
COMPONENT CON NOT BE  
MOUNTED IN THIS AREA  
COMPONENTS THAT HAVE  
5mm HEIGHT CAN BE  
MOUNTED IN THIS AREA  
1.905±0.05 (.075±0.002  
)
3.810±0.05 (.150±0.002  
5.715±0.05 (.225±0.002  
)
NOTE 4  
UNLESS OTHERWISE SPECIFIED  
TOLERANCES ARE ±0.5mm (0.002 in.)  
Note 2  
)
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
14  
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.)  
RAISED TYPE, WITH ESD CLIPS  
DIMENSIONS  
Part number: FCN-565P068-G/0231-E4  
11 (.433)  
8 (.315)  
10.5 (.413)  
5 (.197)  
1 (.039)  
40 (1.574)  
1 (.039)  
11.2 (.441)  
35.2 (1.39)  
40 (1.57)  
1.8  
(.071)  
83.38 (3.28)  
11  
(.433)  
0.51(0.020)  
1.905 (0.075)  
3.810 (0.150)  
5.715 (0.225)  
Unit: mm (in.)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
40±0.1 (1.57±.002  
)
6-0 (.236-0)  
5-0(.197-0)  
4.4-0 (.173-0)  
9.5-0 (.347-0)  
Note 3  
PCB Foot Print Viewed  
from Connector Side  
NOTE 2  
NOTE 3  
COMPONENT CON NOT BE  
MOUNTED IN THIS AREA  
COMPONENTS THAT HAVE  
5mm HEIGHT CAN BE  
MOUNTED IN THIS AREA  
1.905±0.05 (.075±0.002  
)
3.810±0.05 (.150±0.002  
5.715±0.05 (.225±0.002  
)
NOTE 4  
UNLESS OTHERWISE SPECIFIED  
TOLERANCES ARE ±0.5mm (0.002 in.)  
Note 2  
)
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
15  
560H Series Connector Conforming to Ver. 4  
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)  
DIMENSIONS  
Part Number: FCN-565P136-G/Z-V4  
67.31 (2.65)  
7
7
59.7 (2.35)  
50.8 (2)  
(0.276)  
(0.276)  
34 (1.34)  
Connector with the left and right ejector  
buttons  
Part Number: FCN-565P 136G/005-V4  
67.31 (2.65)  
7
7
59.7 (2.35)  
50.8 (2)  
(0.276) (0.276)  
34 (1.34)  
4.8 (0.189)  
4.8 (0.189)  
10 (0.394)  
78.5 (3.09)  
59 (2.32)  
42 (1.65)  
No.1  
No.35  
No.34  
No.68  
35.5 (1.40)  
4.8 (0.189)  
4.8 (0.189)  
10  
(0.394)  
10  
(0.394)  
42 (1.654)  
42 (1.654)  
35.5 (1.398)  
No. 1  
35.5 (1.398)  
No. 34  
No. 68  
No.35  
No.1  
No.68  
No.34  
No. 35  
No. 1  
No. 68  
No. 35  
Unit: mm (in.)  
Unit: Nom. 34 m (in.)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
50.8 (2)±0.1 (0.0039)  
1.27 (0.05) × (68/2-1)  
= 41.91 (1.65) ±0.1 (0.0039)  
1.27 (0.05)±0.05 (0.0020)  
No.1  
No.35  
No.34  
No.68  
No.34  
No.68  
No.1  
No.35  
±0.1 (0.0039)  
4- ø 2.8 (0.110)  
34 (1.339)±0.05 (0.0020)  
67.31 (2.65)±0.1 (0.0039)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
16  
560H Series Connector Conforming to Ver. 4  
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS  
DIMENSIONS  
Button  
ESD  
Right Button  
FCN-560A08  
FCN-560A14  
11 (.433)  
Color  
25 (.984)  
50.6 (1.99)  
7 (.275)  
BLACK  
7.22 (.284)  
BEIGE  
8 (.315)  
2.1 (.083)  
4 (.157)  
Unit: mm (in.)  
Button  
ESD  
Left Button  
FCN-560A16  
FCN-560A22  
Color  
8 (.315)  
4 (.157)  
2.1 (.083)  
BLACK  
BEIGE  
7.22 (.284)  
25 (.984)  
50.6 (1.99)  
7 (.275)  
11 (.433)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
17  
560H Series Connector Conforming to Ver. 4  
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE  
DIMENSIONS  
Part number: FCN-564P068-G/A-V4  
59.74 (2.35)  
5.715 (0.225)  
1.905 (0.075)  
1.27 x (34-1) = 41.9 (1.65)  
1.27 (0.05)  
No.1  
No.17  
No.51  
No.34  
No.68  
No.35  
7.00 (.276)  
44.80 (1.76)  
51.80 (2.039)  
Unit: mm (in.)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
1.27 x (68/2-1) = 41.91 (1.65)±0.1 (0.0039)  
No.1  
±0.05 (0.0020)  
1.27 (0.05)  
No. 35  
No.68  
51.8 (2.039)±0.1 (0.0039)  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
18  
560H Series Connector Conforming to Ver. 4  
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)  
DIMENSIONS  
Part number: FCN-564P068-G/0-V4  
Polarization Post  
74 (2.91)  
66.04 (2.6)  
5.715 (0.225)  
1.905 (0.075)  
50.8 (2)  
41.91 (1.65)  
1.27 (0.05)  
59.7 (2.35)  
41.91 (1.65)  
7 (0.394)  
1.27 (0.05)  
No.1  
No.17  
No.34  
No.68  
No.51  
No.35  
Unit: mm (in.)  
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
66.04 (2.6)±0.1 (0.0039)  
No.1  
41.91 (1.65) ±0.1 (0.0039)  
±0.05 (0.0020)  
No.2  
1.27 (0.05)  
No.3  
No.68  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
19  
560H Series Connector Conforming to Ver. 4  
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)  
DIMENSIONS  
Part number: FCN-564P068-G/X0-V4  
74 (2.91)  
67.31 (2.65)  
66.04 (2.6)  
4 (0.157)  
34 (1.34)  
5.715 (0.225)  
50.8 (2)  
41.91 (1.65)  
1.905 (0.075)  
2 – Ø 2.8 (0.110)  
1.27 (0.05)  
4.8 (0.177)  
10 (0.394)  
78.5 (3.09)  
42 (1.653)  
35.5 (1,40)  
No.1  
No.17  
No.51  
No.34  
No.68  
No.35  
Unit: mm (in.)  
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)  
66.04 (2.6)±0.1 (0.0039)  
No.1  
41.91 (1.65) ±0.1 (0.0039)  
No.2  
1.27 (0.05)±0.05 (0.0020)  
No.3  
No.68  
Unit: mm (in.)  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
20  
560H Series Connector Conforming to Ver. 4  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Web: emea.fujitsu.com/components  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141-0022, Japan  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Fujitsu Components  
International  
Headquarter  
Offices  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#01-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop-  
erty of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the  
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its  
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.  
Specifications  
subject to change  
Dimensions are in millimeters (inches)  
21  

Audiovox 128 7744 User Manual
Clarion DB185MP User Manual
Crown Boiler JSE241 User Manual
Directed Audio 6550 User Manual
Eizo FlexScan Color LCD Monitor SX2262W User Manual
Jensen PS1220M User Manual
Jensen UV8035 User Manual
JVC GET0568 013A User Manual
JVC GR DF473 User Manual
JVC GR DVL920 User Manual