Fisher VPC HD700GX User Manual

INSTRUCTION MANUAL  
Digital Movie Camera  
VPC-HD700EX  
VPC-HD700  
VPC-HD700GX  
Important note  
This manual explains how to safely operate the VPC-HD700EX, VPC-HD700  
and VPC-HD700GX.  
Any information regarding only one of these products will be labeled as such.  
Please read these instructions carefully before using the camera.  
Make sure to read and understand the separate booklet “SAFETY MANUAL.  
Keep this manual in a safe place for later reference.  
FOR CANADIAN USERS  
i This Class B digital apparatus complies with Canadian ICES-003.  
FOR EU USERS  
Note:  
iThis symbol mark and recycle system apply only to EU  
countries and do not apply to countries in other areas of  
the world.  
Your SANYO product is designed and manufactured with  
high quality materials and components which can be  
recycled and reused.  
This symbol means that electrical and electronic  
equipment, at their end-of-life, should be disposed of  
separately from your household waste.  
Please dispose of this equipment at your local community  
waste collection/recycling centre.  
In the European Union there are separate collection  
systems for used electrical and electronic products.  
Please help us to conserve the environment we live in!  
SANYO FISHER Sales (Europe) GmbH  
Stahlgruberring 4, D-81829 München, Germany  
SANYO Electric Co., Ltd.  
1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan  
FOR RUSSIAN USERS  
This product certified by official certification company  
which is authorized by Russian Federation.  
English  
ii  
Symbols used in this manual  
HINT  
Points giving some extended instructions or special points to pay  
attention to.  
CAUTION Points that require special attention.  
(page xx) Refer to the page indicated for detailed information.  
You may find the answers to questions or problems concerning camera  
operation in the sections “COMMONLY ASKED QUESTIONS” (page 187)  
and “TROUBLESHOOTING” (page 195).  
iii English  
SHOOT, PLAY BACK AND SAVE  
Install the battery pack and card  
1
Insert the battery pack.  
Battery cover  
Battery pack  
1
2
3
2
Insert the SD Memory Card.  
h An SD Memory Card is not included with your camera. Please  
purchase a commercially sold card.  
h In this manual, the SD Memory Card is referred to as the “card”.  
Card slot cover  
Card slot  
SD Memory card  
English iv  
SHOOT, PLAY BACK AND SAVE  
Before capturing those important shots, be sure to first take a  
test shot to confirm that your camera is set up and ready to go  
i
Sanyo declines any claim for compensation for recorded contents etc. in case  
of photographing or recording failure due to a chance camera or card flaw.  
Shooting  
1
2
Set the REC/PLAY switch  
to REC.  
REC/PLAY switch  
Set to REC  
Press the ON/OFF button  
for at least 1 second to turn  
the camera on.  
[
[
] button  
] button  
h
If the screen to set the date  
and time appears, press  
the MENU button 2 times  
to cancel it.  
Monitor  
For how to set the date  
and time, see page 42.  
3
Record.  
To record a video clip:  
h
Press the [  
] button to  
begin recording a video  
clip.  
h
Press the [  
again to end the recording.  
To take a photo:  
] button  
ON/OFF  
button  
h
Press the [  
] button.  
h
A still image is captured.  
HD-SHQ  
362  
00:05:0088  
F3.5  
1/30  
v
English  
Playback  
1
Set the REC/PLAY switch  
to PLAY.  
h The display changes to  
the Playback Screen and  
the image that was just  
captured is shown.  
2
Toggle the SET button to  
the left or right to display  
the image you wish to see.  
<Video clip playback>  
h Video clips are indicated  
by a video clip pattern  
along the left and right  
sides of the screen.  
h Press the SET button to  
start video clip playback.  
<To return to the shooting  
mode>  
h Set the REC/PLAY  
switch to REC.  
When you are finished using the camera...  
Press the ON/OFF button for at least 1 second to turn the camera off.  
English vi  
SHOOT, PLAY BACK AND SAVE  
Burn your recorded video clips onto a DVD  
(Windows XP)  
Introduced here is the procedure to use the supplied DVD-ROM (Xacti  
Software DVD) to burn movies captured with your camera to a DVD,  
creating your original DVD.  
Install the application programs  
Install two programs from the Xacti Software DVD to your computer:  
Adobe Photoshop Album Starter Edition (in this manual, referred to as  
Photoshop Album SE) and, for creating DVDs, Adobe Premiere Elements 3.0  
(in this manual, referred to as Premiere Elements).  
1
2
Set the supplied DVD-ROM (Xacti Software DVD) in your computer’s  
DVD drive.  
h The installation window opens.  
Click on the application program you wish to install.  
h After clicking on an application program, follow the instructions shown  
on the monitor to install the program.  
h When installing Premiere Elements, input the serial number found on  
vii English  

Alpine Type R SWR 1223D User Manual
Clover Electronics Z570 User Manual
Crestron electronic STX 1550C User Manual
Cuisinart DLC 2E User Manual
Dual Car Stereo System DXV3D User Manual
Hitachi DZ HS803A User Manual
Hitachi VM E521A User Manual
Hobie Spinnaker Snuffer User Manual
Ikelite TRV33 User Manual
JVC GET0626 001B User Manual