Quick Setup Guide I DX-WBRDVD1/DX-WBRDVD1-CA for Connected Blu-ray Disc Player
5 Press ENTER. The Network List screen opens showing a list of available wireless
networks.
Connecting a TV
Using HDMI (best)
Network List
Congratulations on your purchase of a
high-quality Dynex product. Your
DX-WBRDVD1/DX-WBRDVD1-CA represents
the state of the art in Blu-ray Disc player
design and is designed for reliable and
trouble-free performance.
TV
Back of player
Hartleys
Steven
Linsys
6 Press or to select the wireless network you want your player to connect to,
then press ENTER. A Network Setup screen opens with the following options:
• Connect—Connect to this network.
• Disconnect—Disconnect from this network.
• Delete—Delete the current network.
Package contents
Using an AV cable
Note: The AV cable can only send standard-definition video (480i) to your TV.
• Blu-ray disc player
• Remote control
• Quick Setup Guide
•
•
AAA batteries (2)
User Guide
• WPS Pin—Create a random PIN number password.
TV
Back of player
7 If your network does not use encryption, press or to select Connect, then
press ENTER. If the wireless network is working, you should see a checkmark and
a connected message on the TV. If the message does not appear, repeat the
steps above.
Installing remote control batteries
1 Remove the battery compartment cover.
Yellow=Video
White=Left audio
Red=Right audio
OR
If your network uses encryption:
a Press or to select the Password field, then press ENTER.
An on-screen keyboard opens.
A/V cable
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
b Press , , , or to select the first letter in the password, then press
ENTER. Repeat this step to enter the rest of the password. If you make a
mistake, use the clear key to delete the character.
To connect to a home theater, see your User Guide.
c After you enter the password, select the red “Done” in the upper left-hand
corner of the keyboard, then press ENTER to close the keyboard.
Connecting to your home network
d Press or to select Connect, then press ENTER. A connection message
appears. Select Close, then press ENTER. If the connection is not successful,
repeat the steps above.
This player can be connected to your wired network using the Ethernet port on the
back of your player or using a wireless network. Using a wired network provides the
best performance, because the attached devices connect directly to the network and
are not subject to radio frequency interference.
Connecting to the Internet with a wired network:
There are three types of wireless network connections:
1 Connect a network cable to the INTERNET jack on the back of your player and
into a wired router using a commercially available LAN or Ethernet cable
3 Replace the battery compartment cover.
•
•
User selects a network form a list of available networks
User uses WIFI protected Setup
Connecting to the Internet with a wireless network:
1 Set up your access point or wireless router (if not already set up).
2 Press ENTER. The Settings menu opens.
Back of player
System
Display
Network
HDMI Status
Connected
1080P
HDMI preferred Format
Resolution
BD-Live
Display
Network cable
Wired router
HDMI Auto
16:9 Original
Off
Settings
TV Aspect
Film Mode(1080p24)
Deep Color
Audio
For the most updated User Guide, please visit
Auto
Language
Parental
3 Press or to select Network, then press ENTER.
4 The Wireless Settings screen opens.
2 Press ENTER. The Settings menu opens.
Language
Wireless
Network List
Parental
System
Network
WiFi Protected Setup(WPS)
Manual
Settings
BD-Live
Display
Audio
IP Settings
|