XD622W
INSTALLATION/OWNERS MANUAL
AM/FM/CD Weather Receiver
XD622W INSTALLATION
Wiring Diagram
FUSE
When replacing a fuse,
make sure new fuse is the
correct type and amperage.
Using an incorrect fuse
could damage the radio.
The XD622W uses one
10 amp ATM fuse located
beside the wiring connector.
3
XD622W OPERATION
Control Locations
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
Release
Power
Audio
Mode
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
Bass Boost
Preset 6
Preset 5
Preset 4
Scan
Display
Auto Store/Preset Scan
EQ
Preset 3/CD Intro
Preset 2/CD Random
Tune/Track Down
Eject
18 Preset 1/CD Repeat
19 Play/Pause/Band
10
20
Tune/Track Up
Mute
For semi-permanent faceplate installation, remove trim ring
and install supplied Phillips head #1 screw through left side
of mounting frame into faceplate.
*Semi-permanent
Faceplate Attachment
4
XD622W OPERATION
General Operation
Faceplate Removal Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Power On/Off Press PWR or any other button (except eject) to turn the unit
on. Inserting a CD will turn the unit on automatically. Press
PWR to turn the unit off.
Mode Press MODE to select between AM/FM tuner, weatherband
tuner, CD player and auxiliary input. Modes of operation are
indicated in the display.
Bass Boost Press BASS to activate and deactivate bass boost curve.
Activating this feature will enhance the bass frequencies
when listening to music at all volumes.
Volume Adjust volume using rotary encoder (00-46).
Programmable Press and hold PWR for 3 seconds to program currently
Turn-On Volume selected volume level.
Confirmation Beep Press rotary encoder for 3 seconds to turn confirmation beep
on/off.
Mute Press MUTE to silence the audio. Press MUTE again to cancel.
Preset EQ Curves Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve.
Display Press DISP to select between clock and radio frequency
(tuner mode) or CD track/elapsed time (CD player mode).
Set the Clock With the unit on, press and hold DISP until clock begins to
flash, then release. Press TUNE
to adjust the hours and
TUNE to adjust the minutes. Press DISP momentarily
to save the selected time.
12/24-hour Clock The clock will display 12-hour AM/PM time in U.S. frequency
spacing mode (PM 10:00). In European frequency spacing
mode, the clock will display 24-hour time (22:00).
5
XD622W OPERATION
General Operation
Programmable Press and hold DISP then press TUNE
to select radio
Display Priority frequency (tuner mode) or CD track/ elapsed time (CD player
mode) display priority (default). Clock is accessed by
pressing DISP momentarily.
Press and hold DISP then press TUNE
to select clock
display priority. Radio frequency or CD track/elapsed time is
accessed by pressing DISP momentarily.
Programmable Programs unit to display clock/no clock when unit is off.
Clock Priority Press and hold MODE then press PRESET 1 to turn clock
priority on/off.
Reset Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs. The
RESET button is located behind the faceplate.
Audio Press rotary encoder to select between Volume (default),
Bass, Treble, Balance & Fader.
Bass Press rotary encoder until BASS appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Treble Press rotary encoder until TRE appears
Rotate encoder left/right to adjust
(+6 maximum / -6 minimum)
Balance Press rotary encoder until BAL appears
Rotate encoder left/right to adjust
(L12-0-R12) 00 represents equal balance.
Fader Press rotary encoder until FAD appears
Rotate encoder left/right to adjust
(F12-0-R12) 00 represents equal fader.
Source Audio Memory Individual Bass and Treble settings are retained in memory
for AM, FM, Weatherband, CD and AUX modes.
6
XD622W OPERATION
AM/FM Tuner Operation
Press TUNE
strong station.
or
momentarily to seek the next
Seek Tuning
Press TUNE
or
for more than 2 seconds, then
Manual Tuning
release. "MANU" will momentarily appear in the display.
Press TUNE or momentarily to move radio
frequency up or down one step at a time. Press and hold to
advance quickly. If tuning is not adjusted for 5 seconds, the
unit will return to seek tuning mode (default). "AUTO" will
momentarily appear in the display.
Press SCAN to preview strong stations on the current band,
pausing for 5 seconds at each. Press SCAN again to cancel.
Scan Tuning
Band
Press BAND to select between FM1, FM2, FM3 and AM1,
AM2 bands.
Press and hold BAND then press TUNE
European frequency spacing. Press and hold BAND then
press TUNE to select U.S. frequency spacing (default).
to select
Frequency Spacing
Anytime frequency spacing is changed, all station presets
are erased.
Up to 18 FM stations and 12 AM stations can be stored. To
store a station, select the desired band and station. Press
and hold the desired preset button for more than 2 seconds.
When stored, the preset number will appear in the display.
The station can be recalled anytime by pressing the
corresponding preset button.
Storing and Recalling
Station Presets
Press AS/PS for more than 3 seconds to automatically store
the six strongest stations in the current band. Automatic
Local/Distance is activated during the initial band scan.
Automatically
Store Stations
Press AS/PS to scan presets 1-6 on the current band,
pausing for 5 seconds at each. Press AS/PS again to cancel.
Preset Scan
7
XD622W OPERATION
Weatherband Tuner Operation
Manual Tuning Press TUNE
or
momentarily to seek the next
weatherband station.
Direct Tuning Press preset 1~6 or BAND to directly access the 7
weatherband stations. Refer to the table below.
Weatherband Stations - Direct Tuning Table
Button
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
BAND
WB Frequency
162.400 MHz
162.425 MHz
162.450 MHz
162.475 MHz
162.500 MHz
162.525 MHz
162.550 MHz
LCD Display
Wb - 1
Wb - 2
Wb - 3
Wb - 4
Wb - 5
Wb - 6
Wb - 7
8
XD622W OPERATION
CD Player Operation
With the label facing up, insert a standard size CD into the
CD slot. The CD will automatically begin playback.
Insert CD
Eject CD
Press the EJECT button to stop and eject the CD. The unit
will change to previous mode of operation (AM/FM tuner,
Weatherband tuner or auxiliary input). If the disc is not
removed within 10 seconds, the unit will reload the disc.
The unit does not have to be turned on to eject CD.
Press TRACK
Press TRACK
to skip to the beginning of the next track.
to return to the beginning of the current
Track Select
track. Pressing TRACK
again skips to the beginning of
the previous track.
Press and hold TRACK
or reverse a track.
or TRACK
to fast forward
Fast Forward
and Reverse
Press
Press
/
/
II to temporarily stop CD playback.
II again to resume playback.
Pause
Intro
l
l
Press INT to play the first 10 seconds of each track.
Press INT again to cancel.
Press RPT to continuously repeat selected track. Press RPT
again to cancel.
Repeat
Random
Press RDM to play all tracks in random order. Press RDM
again to cancel. Random mode is retained in memory when
selecting between modes and when the unit is turned
on/off.
Some CD-Rs may be incompatible with this unit, depending
on media type and recording method. This model does not
support CD-RWs.
CD-R Compatibility
9
XD622W WARRANTY
Limited One-Year Warranty
This warranty gives you specific legal rights.
You may also have other rights which vary from state
to state.
What to do?
1. Before you call for service, check your operating
instructions. A slight adjustment of any custom
controls may save you a service call.
Namsung America Inc. warrants this product to the
original purchaser to be free from defects in material
and workmanship, under normal conditions, for a
period of one year from the date of the original
purchase.
2. If you require service during the warranty period,
you must carefully pack the product (preferably in the
original package) and ship it by prepaid transportation
with proof of the purchase date from the retailer to
the Return Center address listed below.
Namsung America agrees, at our option, during the
warranty period, to repair any defect in material or
workmanship or to furnish an equal new or renewed
product in exchange without charges, subject to
verification of the defect or malfunction and proof of
the date of purchase.
3. Please describe your problem in writing and
include your name, a return UPS shipping address
(P.O. Box not acceptable), and a daytime phone
number with your shipment.
4. DUAL will pay the return shipping charges if the
product is returned to an address within the USA.
During the One-Year Warranty Period: For One Year
from the date of purchase, your product will be
replaced with a new, renewed or comparable product
(whichever is deemed necessary) if it becomes
defective or inoperative. This is done without charge
to you. Replacement products are warranted for the
balance of the original warranty period.
Namsung America Inc.
Attn: Returns Center
21318 64th Ave. South
Kent, WA 98032 U.S.A.
Toll Free: 1-866-626-7863
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation the
implied warranties of merchantability and
fitness for a particular purpose and any obligation,
liability, right, claim or remedy in contract or tort,
whether or not arising from the company’s
negligence, actual or imputed. No person or
representative is authorized to assume for the
company any other liability in connection with the sale
of this product. In no event shall the company be
liable for indirect, incidental or consequential
damages.
Who is covered? This warranty is extended to the
original retail purchaser for products purchased and
used in the U.S.A., in the 48 contiguous states ONLY.
What is covered? This warranty covers all defects in
material and workmanship in this product. The
following are not covered: installation/removal costs,
damage resulting from accident, misuse, abuse,
neglect, product modification, improper installation,
incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product, or
damage occurring during return shipment of the
product.
10
XD622W OPERATION
Specifications
CD Player Signal-to-noise: >92dB
Frequency response: 10Hz-20kHz
Channel separation @ 1kHz: >65dB
D/A converter: 1 Bit
FM Tuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 8.5dBf
50dB quieting sensitivity: 10dBf
Stereo separation @ 1kHz: 40dB
Frequency response: 30Hz-13kHz
AM Tuner Tuning range: 530kHz-1710kHz
Usable sensitivity: 22uV
Frequency response: 30Hz-2.2kHz
Wetherband Tuner Tuning range: 162.400MHz-162.550MHz
General Total power output: 208 Watts Peak
Power output: 52Wx4 @ 4 ohms, 14.4 VDC
Operating voltage: 11-16 VDC, negative ground
Speaker output impedance: 4~8 ohms
Line output voltage: 2V
Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)
Design and specifications subject to change without notice
11
XD622W OPERATION
Troubleshooting
Problem
Cause
Action
Yellow wire not connected or incorrect voltage Check connections for proper voltage
Unit will not turn on
(no power)
Red wire not connected or incorrect voltage
Black wire not connected
Fuse blown
(11~16VDC)
Check connection to ground
Replace fuse
Speaker wires not connected
Check connections at speakers
Unit has power
(but no sound)
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
Yellow or red wire touching chassis ground
Speaker wires touching chassis ground
Incorrect fuse rating
Check for pinched wire
Check for pinched wire
Use fuse with correct rating
Unit blows fuses
Unit is not mounted correctly or backstrap is
not secure
Check mounting sleeve and backstrap
support
Excessive skipping
Physical defect in media (CD or CD-R)
Load/Eject operation error
Focus adjustment error
Check media for scratches
Press eject or RESET
Clean or replace media
ER02 appears on display
ER03 appears on display
ER04 appears on display
ER06 appears on display
ER07 appears on display
ER08 appears on display
ER09 appears on display
Tracking auto adjustment error
Sled operation error
Clean or replace media
Press eject or RESET
Press eject or RESET
Press eject or RESET
Clean or replace media
Focus error or disc is in upside down
CLV (PLL) operation error
TOC data read error
Namsung America Inc.
21318 64th Ave. South
Kent, WA 98032
Toll Free: 1-866-626-7863
©2004 Namsung America, Inc.
EVOK0404-V01
DMP65
INSTALLATION/OWNERS MANUAL
6.5" Dual Cone Marine Speakers
MARINE
DMP65 INSTALLATION
Preparation/Installation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal.
(consult a qualified technician for instructions)
• Use extreme caution when drilling holes to avoid damaging fuel lines,
hydraulic lines or existing wiring.
Getting Started
• Determine where the speakers will be mounted. Ensure an area large enough
for the speaker to mount evenly. Be sure the mounting location is deep enough
for the speaker to fit.
• Using an appropriate tool, cut a 5.13" diameter mounting hole. Route speaker wires
and connect to speakers, observing speaker polarity.
• Install speaker into opening using supplied hardware and test for correct operation.
TYPICAL MOUNTING METHOD
2
DMP65 WARRANTY
Limited One-Year Warranty
This warranty gives you specific legal rights. You may
also have other rights which vary from state to state.
What to do? If the product requires warranty service,
you must prepay the initial shipping charges. DUAL
will pay the return shipping charges if the product is
returned to an address within the USA.
Namsung America Inc. warrants this product to the
original purchaser to be free from defects in material
and workmanship, under normal conditions, for a
period of one year from the date of the original pur-
chase.
Namsung America Inc.
Attn: Returns Center
21318 64th Ave. South
Kent, WA 98032 U.S.A.
Toll Free: 1-866-626-7863
Namsung America agrees, at our option, during the
warranty period, to repair any defect in material or
workmanship or to furnish an equal new or renewed
product in exchange without charges, subject to veri-
fication of the defect or malfunction and proof of the
date of purchase.
Exclusion of Certain Damages: This warranty is
exclusive and in lieu of any and all other warranties,
expressed or implied, including without limitation the
implied warranties of merchantability and fitness for
a particular purpose and any obligation, liability, right,
claim or remedy in contract or tort, whether or not
arising from the company’s negligence, actual or
imputed. No person or representative is authorized to
assume for the company any other liability in connec-
tion with the sale of this product. In no event shall the
company be liable for indirect, incidental or conse-
quential damages.
During the One-Year Warranty Period: For One Year
from the date of purchase, your product will be
replaced with a new, renewed or comparable product
(whichever is deemed necessary) if it becomes defec-
tive or inoperative. This is done without charge to
you. Replacement products are warranted for the
balance of the original warranty period.
Who is covered? This warranty is extended to the
original retail purchaser for products purchased and
used in the U.S.A., in the 48 contiguous states ONLY.
What is covered? This warranty covers all defects in
material and workmanship in this product. The fol-
lowing are not covered: installation/removal costs,
damage resulting from accident, misuse, abuse, neg-
lect, product modification, improper installation,
incorrect line voltage, unauthorized repair or failure to
follow instructions supplied with the product, or dam-
age occurring during return shipment of the product.
3
DMP65 SPECIFICATIONS
Specifications
7.13"
Outside Diameter
Mounting Depth
Mounting Height
Cut-out Diameter
Frequency Response
Sensitivity
2.5"
.88"
5.13"
45Hz-18kHz, 3dB
90dB 1W/1M
4 ohms
20 Watts
60 Watts
Impedance
RMS Power
Peak Power
Specifications subject to change without
notice
Namsung America Inc.
21318 64th Ave. South
Kent, WA 98032
Toll Free: 1-866-626-7863
©2003 Namsung America, Inc.
EVOK0603-V01
|