USER’S
INSTRUCTION
7” TFT LCD
COLOR REAR VIEW SYSTEM
MODEL# TFT7001
Copyright © 2006 Clover Electronics U.S.A. All Rights Reserved.
Important safety precautions
● Do not watch and operate the monitor while driving. It may cause a car accident because of the
distraction.
● Do not install the monitor on a place where obstruct the driver’s viewing or near and airbag device.
● Prevent any foreign objects or liquid from entering into the product. In case of that, turn the power
off immediately, and contact an authorized dealer to inspect and test the product.
● Place the product away from direct sunlight or hot sources.
● To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
● Refer servicing to qualified personnel only.
● Do not change or modify this product, the warranty terms will be voided.
Features
● 7” TFT LCD Wide Screen
• Water proof & Rugged Steel Construction
• High resolution
• Switch-able Normal/Mirror image
• 2 camera inputs
• 1 Audio input
• Adjustable mounting bracket
• Operating temperature -12ºF to 120ºF
• On Screen Display (OSD)
• IR Remote Controller
3
1. Front Panel of the Monitor
①
②
③
④
⑤
⑥
① Receiver for Remote Controller
② ▼Button: Press to change menu values
③ ▲ Button: Press to change menu values
④ SEL Button: Press to navigate the menu items
⑤ MENU Button: Press to display the OSD Menu (PICTURE-FUNCTION-PICTURE)
⑥ Power On/Off Switch
2. Remote Controller
① MUTE Button: Press to temporarily cut off the sound
② POWER Button: Power On/Off
③ MENU Button: Press to display the OSD menu
(PICTURE-FUNCTION-PICTURE)
④ VOL ◀▶ Button: Press to change menu values
⑤ MENU▼▲ Button: Press to navigate the menu items
4
3. SETUP Menu
3-1 PICTURE
Press the Menu button to go into the PICTURE Setup menu.
PICTURE
■ PICTURE OSD
1. BRIGHTNESS: To adjust the brightness
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
50
50
50
2.CONTRAST: To adjust the contrast
3. SHARPNESS: To adjust the color
4. COLOR: To adjust the color
5. TINT : To adjust the Tint
50
50
TINT
UD FLIP
LR FLIP
6. UD FLIP : Normal or Upside-down image
7. LR FLIP : Normal or Mirror image
AV1
NTSC M
MENU Button : To display the setup menu
SEL Button : To navigate the menu items
VOL◀▶ Buttons : To change setup values
3-2 FUNCTION
Press the Menu button twice to go into the SELECT Setup menu.
■ SELECT OSD
SELECT
1. INPUT : Select Video input (Video 1 or 2)
INPUT
AV1
2. SYSTEM : Select System Type (NTSC/PAL/SECOM)
3. DISPLAY MODE : WIDE / NORMAL / ZOOM
SYSTEM
NTSC M
WIDE
DISPLAY MODE
AV1
NTSC M
5
MENU Button : To display setup menu
SEL Button : To navigate the menu items
VOL◀▶ Buttons : To change setup values
4. INSTALLATION
4-1.Installation of the Camera
6
4-2. Specifications
7
Specifications are subject to change without notice.
System Includes
1- 7” TFT LCD Monitor
1- Color CCD camera
1- 45” Cable
1- Remote controller
2- Batteries
1- Instruction manual
1- Warranty registration card
Optional Accessories
TFT7000
RE600
7” TFT LCD monitor
Color CCD camera
LIMITED 2YEAR WARRANTY
This warranty gives the original purchaser specific legal rights and you may also have other rights, which
vary from state to state. If our products do not function because of any defect in material or workmanship,
we will repair free for 2 year on parts and labor from the date of original purchase. This warranty does not
cover modification, abuse, incidental or consequential damages unless the state of owner’s residence
8
specially prohibits limitations on incidental or consequential damages.
HOW TO OBTAIN FACTORY SERVICE
1. Original purchaser must fill out a warranty card and mail to factory with model number, serial number
and the date of purchase.
2. We will repair or replace, and return to owner the system under this limited warranty.
3. Please pack the system carefully and securely using the original packing materials, and send it prepaid
and insured to: 13073 E. 166th St. Cerritos, CA 90703.
4. Please include a check for $30.00 to cover the cost of return postage and handling. If the system is
returned within the warranty period, please include a proof of purchase. If the system is out of warranty,
you will receive an estimate of the repair cost for your approval before repair work will be started.
9
|