VMA7192
7” LCD
Color Monitor
OWNER’S MANUAL
OWNER’S MANUAL
In extremely cold temperatures, the movement of the picture may be slow and
the picture may be dark, but this is not a malfunction. The set will work
normally once the temperature increases.
Small black and shiny dots inside the liquid crystal panel are normal for liquid
crystal product.
DESCRIPTION
The VMA7192 is a TFT active matrix color LCD monitor which delivers a striking
picture and superior image resolution. The VMA7192 can be used to enjoy video
images with the Clarion video sources, even if no TV tuner is connected.
PACKAGE CONTENTS
7" monitor
5m long cable with 4 male connectors (Video 1, Video 2, Power/Ground,
3.5mm IR)
Hardware (One 1/4-20 with nut and washer)
50cm 2 Pin Power cable
BUTTON AND CONNECTOR LOCATIONS
1
7
5
2
12
11
4
8
9
3
6
10
1
2
3
4
5
Power Button
7
Video 1 Input
IR Sensor
8
9
Video 2 Input
Picture Control Button
Wide Mode (16:9/4:3 Format)
Power Connector
10 IR Remote Out
Source Button
11 Picture Select Up
(Video 1/Video 2 Select)
12 Picture Select Down
6
8 Pin DIN Pigtail
2
VMA7192
WIRING PRECAUTIONS
Read all wiring precautions. If you are not sure of the connections, contact your
authorized Clarion dealer.
1. Disconnect the negative (-) lead of the battery before making any power
connections.
2. When creating passage holes for the power wires, use grommets to eliminate
any sharp edges created during drilling. This will protect the wire from being
nicked and causing a short circuit.
3. When connecting the ground lead, fasten the ground lead (black) securely to
a clean metal plate on the vehicle.
NOTE: The VMA7192 monitor displays video images only. It does not provide
audio output. Refer to the owner's manual of the connected device for informa-
tion on audio output.
INSTALLATION
The VMA7192 is a 7" monitor with an Infrared (IR) eye. It will accept a video sig-
nal from any video source with composite video out. The IR eye will work direct-
ly with any Clarion video source product with an IR Eye Input.
1. Look over the vehicle for a location for the monitor. Each vehicle is different
and locations will vary. Make sure the monitor will not interfere with the
driver.
2. Once a location has been determined, connect the IR, Video RCAs and power
cables to the designated sources.
3. Feed the cables through the mounting location.
4. Plug the cable into the monitor's 8 Pin Din connector. Mount the monitor with
the provided hardware.
8 Pin Mini DIN Connector
1
2
3
4
5
6
7
8
DC 12V
IR Out
Ground
Video Input 1
A/V Signal Ground
NC
Video Input 2
NC
VIDEO IN
VIDEO IN
50CM 2–PIN
POWER CABLE
IR REMOTE OUT
3
OWNER’S MANUAL
MOUNTING OPTIONS
Your Clarion VMA7192 monitor, has four (4) additional side threaded mounting
holes, and is useable with all Clarion's mounting bracket methods. The slot on the
back of the VMA7192 also accommodates dash-mount installations. In addition
to this, the VMA7192 fits perfectly into all Clarion console shrouds, as well as our
new headrest mounting bracket, HRM-150.
M3 X 5 Threaded
Side Mounts
Painted Paper
Hole Covers
1/4-20 Threaded
Insert
PICTURE ADJUSTMENT
To adjust the picture brightness, contrast, tint, color, etc., use the Picture + and -
buttons located on the front panel of the VMA7192. Press the + button to
increase the picture brightness, contrast, etc. Press the - button to decrease
the picture brightness, contrast, etc.
CARE AND MAINTENANCE
Cleaning the cabinet:
Use a soft, dry cloth to gently wipe off any dirt.
Do not use benzene, thinner, car cleaner, etc., as these substances may
damage the cabinet or cause the paint to peel.
Cleaning the LCD panel:
Use a soft, dry cloth to gently wipe off any dust.
The surface is easily scratched; do not rub it with hard objects.
SPECIFICATIONS
GENERAL SPECIFICATIONS:
Power Requirement:
Power Consumption:
Weight:
DC 12V (9-16V)
0.8A Max. (0.8A or Less)
1.3lb (0.6kg)
Dimensions:
7-3/8" x 5-1/8" x 1"
(188 x 130 x 36mm) (W x H x D)
+5º ~ +40º C
Extension Cable with (male connectors
Video 1 Input, Video 2 Input, Power
Connector, 3.5mm IR Remote Out),
Mounting Hardware
Operation Temperature:
Supplied Accessories:
50cm 2 Pin Power cable
MONITOR SPECIFICATIONS:
Display Type:
Screen Size:
Color TFT Active Matrix LCD
7" wide screen
1440 x 234
Pixels:
Screen Resolution:
Video System:
336,960 Dots
NTSC/PAL
4
VMA7192
NOTES:
5
Clarion Co., Ltd.
VMA7192-10 Rev.0 (11/00)
|