Owner’s manual
AM/FM CD PLAYER
•
•
Clarion Co., Ltd.
PE-2552K
280-7910-01
All Rights Reserved. Copyright © 2003: Clarion Co., Ltd.
2003/04 (AB)
Display Items
Flip Down Panel
2. PRECAUTIONS
This unit uses a flip-down structure that makes possible large-size displays.
Z-Enhancer Plus indication
1. When the inside of the car is very cold and the
player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
4. When closing the FLIP DOWN PANEL, do
CAUTION
CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
Operation status indication
Titles, frequency, PS names, clock, etc.
are displays.
not press the [OPEN] button.
USE OF CONTROLS, ADJUSTMENTS, OR PER-
FORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN, MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
5. Strong impacts to the operating or display
section can cause damage or deformation.
6. If the FLIP DOWN PANEL does not open
fully, gently open it with your hand.
1. Always use this unit with the FLIP DOWN
PANEL closed.
: Mute indication
forms on the optical parts of the player, do not THE COMPACT DISC PLAYER and MINI DISC
use the player for about one hour. The con- PLAYER SHOULD NOT BE ADJUSTED OR RE-
densation will disappear naturally allowing PAIRED BY ANYONE EXCEPT PROPERLY
: Enter indication
2. Do not force operations or use this device
abnormally when opening or closing the FLIP
DOWN PANEL.
: Manual indication
normal operation.
QUALIFIED SERVICE PERSONNEL.
2. Driving on extremely bumpy roads which cause CHANGES OR MODIFICATIONS NOT EX-
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
severe vibration may cause the sound to skip. PRESSLY APPROVED BY THE MANUFAC-
TURER FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIP-
MENT.
3. This unit uses a precision mechanism. Even in
the event that trouble arises, never open the
case, disassemble the unit, or lubricate the ro-
tating parts.
INFORMATION FOR USERS:.
Handling Compact Discs
Use only compact discs bearing the
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU-
FACTURER WILL VOID THE WARRANTY AND
WILL VIOLATE FCC APPROVAL.
•
•
Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.
or
Preset channel indication (1 to 6)
Disc number indication (1 to 12)
mark.
Stereo indication
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
To remove a compact disc from its storage case,
press down on the center of the case and lift the
disc out, holding it carefully by the edges.
: Disc indication
: Scan indication
: Repeat indication
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
• Do not use commercially available CD protec-
tion sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
: Random indication
Handling
•
Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played. Therefore,
do not leave them for a long time in the car.
: MAGNA BASS EXTEND indication
Storage
• Do not expose compact discs to direct sunlight
or any heat source.
• Do not expose compact discs to excess hu-
midity or dust.
• Do not expose compact discs to direct heat
from heaters.
• New discs may have
some roughness
Ball-point pen
Roughness
around the edges. If
such discs are used,
the player may not
work or the sound
may skip. Use a ball-
point pen or the like
to remove any
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
roughness from the edge of the disc.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
•
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
• Never play a compact disc with any cello-
phane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
Be sure to unfold and read the next page. /
8
DXZ535
DXZ535
3
DXZ535
4
[T] button
3.CONTROLS /
/
4. NOMENCLATURE
• Use the button to input a title in the CD
changer mode.
Note:
• Use the button to scroll the title during CD-
text play or MD changer play in the MD
changer mode.
Source unit /
/
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Names of the Buttons and their Functions
[UP], [DN] buttons
• Select the disc.
[
[
]
ROTARY
[RDM] button
[OPEN] button
• Deeply push in [OPEN] button to unlock the
flip down panel.
[DIRECT] buttons
• Store a station into memory or recall it di-
rectly while in the radio mode.
]
OPEN
• Perform random play. Also perform disc ran-
dom play when the button is pressed and
held for 1 second or longer.
[ROTARY] knob
[RDM] button
[RPT] button
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
• Perform random play while in the CD mode.
[FNC]
[A-M]
[BND]
[
]
]
Z+
SW-VOL
• Perform repeat play. When this button is
pressed and held for 1 second or longer,
disc repeat play is performed.
[RPT] button
• Repeat play while in the CD mode.
[
• Use the knob to perform various settings.
[Z+] button
[SCN] button
[
]
COLOR
[BND] button
• Move the next disc in increasing order.
• Use the button to select one of the 3 types of
sound characteristics already stored in
memory.
• Perform scan play for 10 seconds of each
track while in the CD mode.
[SCN] button
[
] button
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held for 1 second or
longer.
[SW-VOL] button
• Adjust sub woofer volume.
The volume is adjusted in the range 6.
• Play or pause a CD while in the CD mode.
[a], [d]
[
]
DIRECT
[a], [d] buttons
[
]
[ ]
• Select a station while in the radio mode or
select a track when listening to a CD. These
buttons are used to make various settings.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fast-
backward.
I
[COLOR] button
• Button’s color change to multicolor.
[
], [
DN UP
]
[
]
[ ]
D
[
] button
SCN
• Play or pause a CD, MD or DVD.
[I] button
[
]
[ ]
RPT
T
[a], [d] buttons
• Recall ISR radio station in memory.
• Press and hold for 2 seconds or longer: Store
current station into ISR memory (radio mode
only).
• Select a track when listening to a disc.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fast-
backward.
[
]
[
]
RDM
P/A
[BND] button
• Switch the band, or seek tuning or manual
tuning while in the radio mode.
• Play a first track while in the CD mode.
[D] button
• Switch the display indication (Main display,
Sub display, Clock display).
With the FLIP DOWN PANEL opened /
/
●When the TV is connected
∗ For details, see the section “TV
operations”.
[A-M] button
[T] button
• Use the button to input a title in the CD
mode.
• Use the button to switch to the audio mode
(bass/treble, balance/fader Z-Enhancer Plus,
Magna Bass Extended adjustment)
[
]
[
]
CD SLOT
[P/A] button
• Press and hold the button for 1 second or
longer to enter the adjust mode.
• Perform preset scan while in the TV mode.
When the button is pressed and held for 2
seconds or longer, auto store is performed.
[FNC] button
• Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
[P/A] button
• Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
[
] button
• Switches the operation mode among the ra-
dio mode, etc.
• Switch the TV picture mode or VTR (external)
picture mode.
[UP], [DN] buttons
• Select the disc.
[Q] button
[DIRECT] buttons
• Store a station into memory or recall it directly.
• Eject a CD when it is loaded into the unit.
[CD SLOT]
• CD insertion slot.
[a], [d] buttons
• Select a station.
[BND] button
Major button operations when external equipment is
connected to this unit
• Switch the band.
• When the button is pressed and held for 1
second or longer, switch seek tuning or
manual mode.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
[D] button
●When the CD/MD/DVD changer
• When the button is pressed and held,
is connected
switches the disc titles or track titles while in
the MD changer mode.
• When the button is pressed and held,
changer, refer to the Owner’s Manual pro-
switches the user titles or track titles, etc.
vided with the DVD changer.
∗ For details, see the section “CD/MD
changer operations”. For the DVD
while in the CD changer mode.
5
DXZ535
6
DXZ535
DXZ535
7
5. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
CAUTION
Be sure to close the HOLD FLAP for safety
when removing the DCP.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
Removing the DCP
1. Press the [FNC] button for 1 second or
longer to turn off the power.
2. Insert the left side of the DCP into the main
unit.
2. Deeply push in [OPEN] button to unlock the
2.
flip down panel.
∗ If the flip down panel does not open fully, gen-
tly open it with your hand.
[OPEN] button
DCP
1.
CAUTION
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
DCP
3. Pull the DCP toward you and remove it.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So
close the FLIP DOWN PANEL or remove
the DCP to store into the case.
DCP
• The connector connecting the source unit
and the DCP is an extremely important
part. Be careful not to damage it by press-
ing on it with fingernails, screwdrivers, etc.
Note:
4. Close the HOLD FLAP.
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
HOLD FLAP
DXZ535
9
Functions of Remote Control Unit Buttons
6. REMOTE CONTROL
Mode
Button
CD/MD changer
DVD changer
Receiver for remote control unit
Radio
CD
TV
Switches among radio, CD, CD/MD changer, DVD changer, TV and AUX.
[FUNC]
Plays the first track.
Top play.
Moves the next disc
in increasing order.
Switches reception
band.
Switches reception
band.
[BAND]
Operating range: 30˚ in all directions
Increases and decreases volume (in all modes).
[
[
] , [
] , [
]
]
Signal transmitter
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second:
Fast-forward/fast-backward.
Moves preset
channels up and
down.
Remote control unit
No function.
Switches between playback and pause.
No function.
[
]
[
]
]
[
]
DUAL ZONE
FUNC
[
],[
Turns mute on and off.
[MUTE]
[
[
],[
]
]
BAND
Recalls ISR radio station in memory.
Press and hold for 2 seconds or longer: Stores current station into ISR memory
(radio mode only).
[ISR]
[
]
ISR
[
]
[
[
]
DISP
MUTE
Switches among main display, sub display, clock display.
[DISP]
]
[
]
RDM
SCN
[SCN]
Scan play.
Preset scan.
Preset scan.
Scan play.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 1 second:
Disc scan play.
[
]
RPT
[RPT]
Repeat play.
No function.
No function.
No function.
Repeat play.
When pressed and
held for 1 second:
Disc repeat play.
Inserting the Batteries
1. Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
AA (SUM-3, IECR-6/1.5V)
Batteries
2. Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close
the rear cover.
[RDM]
Random play.
Switches between TV
and VTR.
Random play.
When pressed and
held for 1 second:
Disc random play.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
Rear cover
• When replacing batteries, replace both batteries
with new ones.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
∗ [DUAL ZONE] button is not available.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
Rear side
10
DXZ535
DXZ535
11
Basic Operations
7. OPERATIONS
Basic Operations
∗ The factory default setting is “B<Q 1>”.(Ad-
justment 1/1.25/1.5/2)
“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜
“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...
Note:Be sure to read this chapter referring to the front diagrams of
chapter “3. CONTROLS” on page 5 (unfold).
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
• B-BOOST
• IMPACT
: bass emphasized
: bass and treble empha-
sized
Adjusting the volume
Turning the [ROTARY] knob clockwise in-
creases the volume; turning it counterclockwise
decreases the volume.
∗ The volume level is from 0 (minimum) to 33 (maxi-
CAUTION
Be sure to lower the volume before switch-
• EXCITE
: bass and treble empha-
sized mid de-emphasized
ing off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
• CUSTOM
• Z+ OFF
: user custom
mum).
: no sound effect
1. Press the [A-M] button and select “TREBLE”.
Switching the display
Press the [D] button to select the desired display.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
Each time you press the [D] button, the display
switches in the following order:
Turning on/off the power
Note:
∗ The factory default setting is “T<G 0>”. (Ad-
justment range: –6 to +6)
●When “B-BOOST” is set
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
Main display
Sub display
Clock display
Main display
“B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last
function mode.
3. Press the [d] or [a] button to select
“T<F 10>”.
●When “IMPACT” is set
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “T<F 10>”.(Ad-
justment 10 kHz/15 kHz)
“IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last
function mode.
1. Press the [FNC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
●When “EXCITE” is set
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
“EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last
function mode.
3. Press and hold the [FNC] button for 1 sec-
ond or longer to turn off the power for the
unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM” and “PUSH PWR” appear
in the display alternately, so press the [FNC] but-
ton. The system check starts within the unit.
When the system check is complete, press the
[FNC] button again.
●When “CUSTOM” is set
“BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FAD
0” ➜ Last function mode.
Adjusting the balance
1. Press the [A-M] button and select “BAL 0”.
●When “Z+ OFF” is set
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
“BAL 0” ➜ “FAD 0” ➜ Last function mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the Z-
Enhancer Plus is set to “CUSTOM”.
∗ Once selected, the preferred display becomes
the display default. When a function adjust-
ment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display sev-
eral seconds after the adjustment.
∗ The factory default setting is “BAL 0”. (Adjust-
ment range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
1. Press the [A-M] button and select “BASS”.
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
∗ When you have entered a title in a CD, it ap-
pears in the sub display. If you have not en-
tered a title, “NO TITLE” appears in the title
display instead. For information on how to en-
ter a title, refer to the subsection “Entering
titles” in section “Operations Common to
Each Mode”.
Selecting a mode
1. Press the [FNC] button to change the opera-
tion mode.
Adjusting the fader
1. Press the [A-M] button and select “FAD 0”.
∗ The factory default setting is “B<G 0>”. (Ad-
justment range: –6 to +6)
2. Each time you press the [FNC] button, the
operation mode changes in the following or-
der:
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
3. Press the [d] or [a] button to select “B<F
60>”.
Radio mode ➜ CD mode ➜ CD changer
mode ➜ MD changer mode ➜ DVD changer
mode ➜ TV mode ➜ AUX mode ➜ Radio
mode...
∗ External equipment not connected with
CeNET is not displayed.
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the frequency.
∗ The factory default setting is “B<F 60>”.(Ad-
justment 60/100/200 Hz)
Setting the Z-Enhancer Plus
This unit are provided with 3 types of sound tone ef-
fects stored in memory. Select the one you prefer.
∗ The factory default setting is “FAD 0”. (Adjust-
ment range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
4. Press the [d] or [a] button to select “B<Q 1>”.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [Z+] button, the tone ef-
fect changes in the following order:
Turninng the [ROTARY] knob clockwise or
counterclockwise to select the Q-curve.
12
DXZ535
DXZ535
13
Basic Operations
Radio Operations
Radio Operations
Adjusting the Z-Enhancer Plus
1. Press the [Z+] button and select the Z-En-
hancer Plus mode to adjust.
FM reception
Manual tuning
Auto store
®
For enhanced FM performance the
There are 2 ways available: Quick tuning and
step tuning.
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned in sequen-
tially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
2. Press the [A-M] button and turning the [RO-
TARY] knob clockwise adjusts in the + direc-
tion; tuning it counterclockwise adjusts in the
– direction.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the de-
Listening to the radio
1. Press the [FNC] button and select the radio
mode. The frequency or PS appears in the
display.
sired band (FM or AM).
●When “B-BST 0” selected, you can adjust
the bass in the range of –3 to 3.
1. Press the [BND] button and select the de-
sired band (FM or AM).
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
●When “IMPACT 0” selected, you can
adjust the bass and treble in the range of
–3 to 3.
∗ PS: Programme service name
2. Press the [BND] button and select the radio
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
●When “EXCITE 0” selected, you can adjust
the bass and treble in the range of –3 to 3.
band. Each time the button is pressed, the ra-
dio reception band changes in the following
order:
2. Tune into a station.
●Quick tuning:
∗ When Z-Enhancer Plus is selected, press and
hold the [Z+] button for 2 seconds or longer to
change to the “CUSTOM” mode.
Bass/treble characteristics become flat and
the indication “Z+FLAT” is shown in the dis-
play.
Press and hold the [a] or [d] button for 1
FM1 ➜ FM2 ➜ FM3 ➜AM ➜ FM1...
Preset scan
Preset scan receives the stations stored in pre-
set memory in order. This function is useful
when searching for a desired station in memory.
second or longer to tune in a station.
3. Press the [a] or [d] button to tune in the
●Step tuning:
desired station.
Press the [a] or [d] button to manually
tune in a station.
Press the [Z+] button again to change to the
“Z+ OFF” mode.
Tuning
1. Press the [P/A] button.
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
Note:
Seek tuning
1. Press the [BND] button and select the de-
sired band (FM or AM).
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
1. Press the [BND] button and select the de-
sired band (FM or AM).
∗ The factory default setting is off.
Instant station recall (ISR)
1. Press and hold the [A-M] button for 1 sec-
ond or longer to turn on the MAGNA BASS
EXTEND effect. “M-B EX” lights in the dis-
play.
2. Press the corresponding [DIRECT] button to
recall the stored station.
Instant station recall is a special radio preset
that instantly accesses a favorite radio station at
a touch of a button. The ISR function even oper-
ates with the unit in other modes.
2. Press the [a] or [d] button to automati-
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
cally seek a station.
When the [d] button is pressed, the station is
sought in the direction of higher frequencies; if
the [a] button is pressed, the station is sought
in the direction of lower frequencies.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EX-
TEND effect. “M-B EX” goes off from the
display.
●ISR memory
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
1. Select the station that you wish to store in ISR
memory.
2. Press and hold the [I] button for 2 seconds or
Adjusting the subwoofer
When you default select one of mode (LPF50,
LPF80, LPF120).
longer.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
●Recalling a station with ISR
In any mode, press the [I] button to turn on the
radio function and tune the selected radio sta-
tion. “ISR” appears in the display. Press the [I]
button again to return to the previous mode.
∗ The factory default setting is “S-VOL 0”. (Ad-
justment range: –6 to +6)
1. Press the [SW-VOL ] button to select the
subwoofer volume increases or decreases.
2. Press and hold the [SW-VOL ] button, the
subwoofer volume automatically increases or
decreases.
14
DXZ535
DXZ535
15
CD Operations
CD Operations
Loading a CD
Displaying CD titles
Fast-forward/fast-backward
Repeat play
1. Press the [OPEN] button to access the CD
SLOT behind the FLIP DOWN PANEL.
This unit can display title data for CD-text CDs
and user titles input with this unit.
●Fast-forward
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
Press and hold the [d] button for 1 second or
2. Insert a CD into the centre of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
1. Press the [D] button to display the title.
longer.
1. Press the [RPT] button. “RPT” lights in the
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
●Fast-backward
display and the current track is repeated.
Press and hold the [a] button for 1 second or
Notes:
2. To cancel the repeat play, press the [RPT]
button again. “RPT” goes off from the display
and normal play resumes.
longer.
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be an-
other CD in the mechanism or the unit may re-
quire service.
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title
(disc)...
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
Note:
Random play
The random play selects and plays individual
tracks on a disc in no particular order. This func-
tion continues automatically until it is cancelled.
• Discs not bearing the
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
or
mark and
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
Scan play
1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected ran-
domly and play begins.
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is can-
celled.
Ejecting a CD
1. Press the [OPEN] button to open the FLIP
DOWN PANEL.
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the centre of the insertion
slot.
2. To cancel the random play, press the [RDM]
button again. “RDM” goes off from the
display and normal play resumes.
2. Press the [Q] to eject the CD. Take it out
3. Close the FLIP DOWN PANEL.
∗ The scan play is useful when you want to select a
desired track.
from the ejected position.
3. Close the FLIP DOWN PANEL.
1. Press the [SCN] button to start scan play.
“SCN” lights in the display.
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
CAUTION
2. To cancel the scan play, press the [SCN] but-
ton again. “SCN” goes off from the display
and the current track continues to play.
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After taking out the CD, be sure to close the FLIP
DOWN PANEL.
• After loading a CD, always close the FLIP DOWN
PANEL.
∗ If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto
reload).
Listening to a CD already inserted
Press the [FNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, “NO DISC” appears in the display.
∗ 8 cm CDs are not auto reloaded. Be sure to re-
move it when ejected.
Note:
• If you force a CD into before auto reloading, this
can damage the CD.
Pausing play
1. Press the [
] button to pause play.
Selecting a track
●Track-up
“PAUSE” appears in the display.
2. To resume CD play, press the [
again.
] button
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
16
DXZ535
DXZ535
17
Operations Common to Each Mode
Operations Common to Each Mode
5. Press the [D] button to select a character.
Turning the screen saver function
on or off
This unit is provided with the screen saver func-
tion which allows you to show various kinds of
patterns and characters in the Operation Status
indication area of the display in a random order.
You can turn on and off this function.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “5”. (Adjustment
level:1to 8)
Setting the clock
Each time you press the [D] button, the char-
acter changes in the following orders:
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
Numbers ➜ Symbols ➜ Capital letters ➜
Numbers…
2. Press the [a] or [d] button to select
6. Turn the [ROTARY] knob to select the de-
“CLOCK”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
sired character.
3. Press the [
] button.
7. Repeat step 4 to 6 to enter up to 30 charac-
ters for message.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
4. Press the [a] or [d] button to select the
2. Press the [a] or [d] button to select “CON-
hour or the minute.
TRAST”.
8. Press and hold the [
] button for 2 sec-
5. Turn the [ROTARY] knob clockwise or coun-
onds or longer to store the message in
memory and cancel input message.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to set the correct time.
∗ The clock is displayed in 12-hour format.
terclockwise to adjust the contrast.
∗ The factory default setting is “SS”.
9. Press the [T] button to return to the previous
4. Press the [T] button to return to the previous
6. Press the [
memory.
] button to store the time into
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
mode.
mode.
7. Press the [T] button to return to the previous
mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the
car’s battery or take out this unit, the clock is re-
set. While setting the clock, if another button or
operation is selected, the clock set mode is can-
celed.
Setting the method for title scroll
Set how to scroll in CD-TEXT or MD.
∗ The factory default setting is “ON”.
Setting LOW PASS FILTER
This function allows you to set the low-pass filter
sub-woofer output.
2. Press the [a] or [d] button to select
“SCRN SVR”.
3. Press the [
] button.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
∗ The factory default setting is “LPF 120”.
4. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select
“SCROLL”.
2. Press the [a] or [d] button to select “SW
OFF ➜ SS ➜ MESSAGE
3. Turn the [ROTARY] knob clockwise or coun-
LPF”.
Setting the button illumination
Press the [COLOR] button to select a color
type. Each time you press the [COLOR] button,
the type changes in the following order:
5. Press the [
] button to store the setting.
terclockwise and select “ON” or “OFF”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select the setting. Each time
you turn the [ROTARY] knob, the setting
changes in the following order:
6. Press the [T] button to return to the previous
● ON:
mode.
To scroll automatically.
● OFF:
∗ The following illustration presents one of the
patterns which are shown when the screen
saver function is turned on.
CLR SCAN ➜ RED ➜ MANDARIN ➜ OR-
ANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN ➜
LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR
SCAN…
REAR ➜ LPF 50 ➜ LPF 80 ➜ LPF 120
To scroll just 1 time when the title was
changed or the title key was pressed.
4. Press the [T] button to return to the previous
mode.
4. Press the [T] button to return to the previous
●Setting CLR SCAN mode
mode.
As selecting “CLR SCAN”, the color automati-
cally changes in the following order:
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed for any mode.
* The factory default setting is “WELCOME TO
CLARION”.
Dimmer control
You can set the dimmer control on or off.
∗ The factory default setting is “ON”.
RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜
YELLOW ➜ Y-GREEN ➜ LIME ➜ GREEN ➜
D-GREEN ➜ RED…
∗ The factory default setting is “CLR SCAN”.
∗ During change the color’s name is not appear.
∗ After 3 second the color changes to the other.
●Setting USER mode
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
∗ The factory default setting is “MID”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button to select “DIM-
MER”.
2. Press the [a] or [d] button to select “AUX
The factory default setting is “R>8 G>3”.
2. Press the [a] or [d] button to select “IN-
3. Turn the [ROTARY] knob clockwise to “ON”
SENS”.
PUT”.
As selecting “USER”, press and hold the
[COLOR] button 1 second or longer “R>8 G>3”
appears in the display.
or counterclockwise to “OFF”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“HIGH”, “MID” or “LOW”.
3. Press the [
] button.
4. Press the [T] button to return to the previous
4. Press the [a] or [d] button to move the
mode.
1. Press the [a] or [d] button to move the
cursor.
4. Press the [T] button to return to the previous
cursor.
mode.
2. Turn the [ROTARY] knob clockwise or coun-
terclockwise to select from 0 to 8.
18
DXZ535
DXZ535
19
Operations Common to Each Mode
8. OPERATIONS OF ACCESSORIES
CD/MD Changer Operations
3. Press and hold the [
] button for 2 sec-
Clearing titles
onds or longer to store the color in memory
and cancel setting mode.
1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
Notes:
CD/MD changer functions
Entering titles
2. Press the [D] button and display the sub.
• If the CD playing is not a CD-text CD or no user
When an optional CD/MD changer is connected
Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be en-
tered for each mode are as follows.
3. Press the [T] button.
title has been input, “NO TITLE” appears in the
through the CeNET cable, this unit controls all
display.
The display switches to the title input display.
CD/MD changer functions. This unit can control
a total of 2 changers.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
4. Press the [BND] button.
5. Press and hold the [
] button for 2 sec-
Press the [FNC] button and select the CD(MD)
ond or longer to clear the title and cancel title
input mode.
Mode
CD mode
TV mode
Number of titles
50 titles
changer mode to start play. If 2 CD(MD) chang-
Switching disc titles and track titles
ers are connected, press the [FNC] button to se-
(MD)
lect the CD(MD) changer for play.
20 titles
This unit can display disc titles and track titles
already entered on MDs.
∗ Titles cannot be entered for MDs with this unit.
∗ If “NO MAG” appears in the display, insert the maga-
zine into the CD changer. “DISC CHK” appears in
the display while the player loads (checks) the
magazine.
Triggered audio mute for cellular
telepones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗ This function is not compatible with all cellular
telepones Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
Number of titles
100 titles
1. Press [D] button to display the title. The disc
100 titles
50 titles
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
title or track title is displayed.
2. Each time you press and hold the [D] button
for 1 second or longer, the display toggles
between the disc title and the track title.
1. Press the [FNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
∗ If “NO DISC” appears in the display, load MDs into
the MD changer.
Note:
Note:
• If an MD is not input its disc title or a track title,
“NO TITLE” appears in the display.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices connected to this unit.
CAUTION
Procedure to scroll a title
3. Press the [D] button and display the sub.
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Set “SCROLL” to “ON” or “OFF”.
4. Press the [T] button. The cursor position
(The factory default setting is “ON”. Refer to the
subsection “Turning the screen saver function
on or off” in section “Operation common to
each mode”.)
flashes.
5. Press the [a] or [d] button to move the
Pausing play
1. Press the [
cursor.
] button to pause play.
“PAUSE” appears in the display.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following order:
●When set to “ON”
The title is automatically kept scrolling.
●When set to “OFF”
2. To resume play, press the [
] button again.
Numbers ➜ Symbols ➜ Capital letters ➜
Numbers...
Press the [T] button to scroll the title.
Displaying CD titles
7. Turn the [ROTARY] knob to select the de-
This unit can display title data for CD-text CDs
and user titles input with this unit.
sired character.
Selecting a CD
[DN] or [UP] button correspond to a disc load in
the magazine.
8. Repeat steps 5 to 7 to enter up to 8 charac-
ters for the title.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
●When connected to CDC655z or CDC1255z.
Press the [D] button to display the title.
9. Press and hold the [
] button for 2 sec-
Press the [DN] or [UP] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, “NO
DISC” appears in the display.
onds or longer to store the title into memory
and cancel title input mode.
●When connected to DCZ625 or CDC655Tz
1. Press the [D] button to display the title.
2. Each time you press and hold the [D] button
for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist
title ➜ CD-text title (track) ➜ User title
(disc)…
20
DXZ535
DXZ535
21
CD/MD Changer Operations
TV Operations
2. To cancel disc scan play, press the [SCN]
button again. “DISC” and “SCN” go off from
the display and the current track continues to
play.
Selecting a MD
TV tuner functions
Manual tuning
[DN] or [UP] button correspond to a MD load in
the MD changer. Press the [DN] or [UP] button
to select the desired disc.
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV requires a TV tuner and
monitor.
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
∗ If a MD is not loaded in a slot of MD changer, “NO
DISC” appears in the display.
Repeat play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
Watching a TV
1. Press the [FNC] button and select the TV
1. Press the [BND] button and select the de-
Selecting a track
●Track-up
sired band (TV1 or TV2).
mode.
1. Press the [RPT] button. “RPT” lights in the
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tun-
ing is now available.
1. Press the [d] button to move ahead to the
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles be-
tween TV1 and TV2.
display and the current track is repeated.
beginning of the next track.
2. To cancel repeat play, press the [RPT] button
again. “RPT” goes off from the display and
normal play resumes.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
2. Tune into a station.
3. Press the [a] or [d] button to tune in the
●Quick tuning:
desired TV station.
●Track-down
Press and hold the [a] or [d] button for 1
Disc repeat play
1. Press the [a] button to move back to the
second or longer to tune in a station.
After all the tracks on the current disc have
been played, disc repeat play automatically re-
plays the current disc over from the first track.
This function continues automatically until it is
cancelled.
beginning of the current track.
Watching a video
●Step tuning:
2. Press the [a] button twice to move to the
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video cas-
sette recorder (VCR) to the TV tuner input termi-
nal.
Press the [a] or [d] button to manually
beginning of the previous track.
tune in a station.
Fast-forward/fast-backward
●Fast-forward
1. Press and hold the [RPT] button for 1 second
or longer. “DISC” and “RPT” light in the dis-
play and disc repeat play starts.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for
later recall.
1. Press the [
2. To return to the TV broadcast, press the
] button.
] button to select VTR.
Press and hold the [d] button for 1 second or
longer.
2. To cancel disc repeat play, press and hold
the [RPT] button again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
[
●Fast-backward
Press and hold the [a] button for 1 second or
1. Press the [BND] button and select the de-
longer.
Tuning
sired TV band (TV1 or TV2).
There are 3 types of tuning mode available,
Seek tuning, manual tuning and preset tuning.
2. To recall a stored TV station, press the de-
Random play
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This func-
tion continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
sired [DIRECT] button to select that station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Seek tuning
1. Press the [BND] button and select the de-
sired TV band (TV1 or TV2).
1. Press the [RDM] button. “RDM” lights in the
display and random play begins.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. To cancel random play, press the [RDM] but-
ton again. “RDM” goes off from the display
and normal play resumes.
1. Press the [SCN] button to start track scan-
ning. “SCN” lights in the display.
2. To cancel the scan play, press the [SCN] but-
ton again. “SCN” goes off from the display
and the current track continues to play.
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current sta-
tion into preset memory.
2. Press the [a] or [d] button to automati-
cally seek a station. Press the [d] button to
automatically tune up the frequency band to
the next available TV station; press the [a]
button to automatically tune down.
Disc random play
The disc random play selects and plays indi-
vidual tracks or discs automatically in no par-
ticular order. This function continues automati-
cally until it is cancelled.
Disc scan play
Disc scan play locates and plays the first 10 sec-
onds of the first track on each disc in the cur-
rently selected CD (MD) changer. This function
continues automatically until it is cancelled.
1. Press and hold the [RDM] button for 1
second or longer. “DISC” and “RDM” light in
the display and disc random play starts.
∗ Disc scan play is useful when you want to select a
desired CD (MD).
2. To cancel disc random play, press and hold
the [RDM] button again. “DISC” and “RDM”
go off from the display and normal play re-
sumes from the current track.
1. Press and hold the [SCN] button for 1 sec-
ond or longer. “DISC” and “SCN” light in the
display and disc scan play starts.
22
DXZ535
DXZ535
23
TV Operations
9. IN CASE OF DIFFICULTY
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
Problem
Cause
Fuse is blown.
Measure
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
Power does not turn
on.
(No sound is pro-
duced.)
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
2. Press the [a] or [d] button to select “TV
Incorrect wiring.
Consult your store of purchase.
1. Press the [BND] button and select the de-
AREA”.
sired TV band (TV1 or TV2).
3. Press the [
] button.
No sound output
Power antenna lead is shor- 1. Turn the unit off.
ted to ground or excessive 2. Remove all wires attached to the power
2. Press and hold the [P/A] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
channels.
4. Turn the [ROTARY] knob clockwise or coun-
when operating the
unit with amplifiers or current is required for re-
power antenna at-
tached.
antenna lead. Check each wire for a possible
short to ground using an ohm meter.
3. Turn the unit back on.
terclockwise to select the reception area.
mote-on the amplifiers or
power antenna.
5. Press the [
] button.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the
amplifiers turn off before all wires are
attached, use an external relay to provide
remote-on voltage (excessive current
required).
6. Press the [T] button to return to the previous
mode.
Preset scan
The above operations are required when a TV
tuner other than TTX7501z is connected.
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
Nothing happens
when buttons are
pressed.
The microprocessor has
Turn off the power, then
malfunctioned due to noise, press the [OPEN] button
Reset button
etc.
and remove the DCP.
Press the reset button for
about 2 seconds with a
thin rod.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Display is not accu-
rate.
Note:
• Do not press and hold the [P/A] button for 2 sec-
onds or longer. Doing so will trigger the auto store
function and start storing stations into memory.
DCP or main unit connec-
tors are dirty.
Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
Compact disc cannot Another compact disc is al- Eject the compact disc before loading the new
Setting the TV diver
be loaded.
ready loaded.
one.
You can change the reception setting for the TV
antenna connected to the TV tuner.
Sound skips or is noi- Compact disc is dirty.
sy.
Clean the compact disc with a soft cloth.
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment
selection display.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
2. Press the [a] or [d] button to select “TV
Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.
after power is turned the internal lens when the
DIVER”.
on.
car is parked in a humid
place.
3. Turn the [ROTARY] knob clockwise to set to
“ON” or counterclockwise to set to “OFF”.
● ON:
Sets reception emphasizing the visual.
● OFF:
Sets the diver setting to OFF.
4. Press the [T] button to return to the previous
mode.
24
DXZ535
DXZ535
25
Error Display
ERROR 2
Cause
Measure
10. ERROR DISPLAYS
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism and con-
sult your store of purchase.
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
ERROR 3
ERROR 6
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, non-
warped-disc.
Cause
Measure
Error Display
ERROR 2
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
Set the correct Parental level.
A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism
not ejected.
and consult your store of purchase.
ERROR P
ERROR R
Parental level error
Region code error
Eject the disc and replace correct region
code disc.
ERROR 3
ERROR 6
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
A CD is loaded upside-down inside the
CD deck and does not play.
Eject the disc then reload it properly.
ERROR 2
A CD inside the CD changer is not
loaded.
This is a failure of CD changer’s
mechanism and consult your store of
purchase.
ERROR 3
ERROR 6
ERROR H
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-
warped disc.
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
Displayed when the temperature in the
MD changer is too high and playback has wait for a while to cool off MD changer.
been stopped automatically.
Lower the surrounding temperature and
ERROR 2
An MD inside the MD changer is not
loaded.
This is a failure of MD changer’s
mechanism and consult your store of
purchase.
ERROR 3
ERROR 6
An MD inside the MD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-
warped disc.
An MD inside the MD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
Displayed when a non-recorded MD is
loaded in the MD changer.
Load a pre-recorded MD in the MD
changer.
26
DXZ535
DXZ535
27
11. SPECIFICATIONS
FM Tuner
Frequency Range:
Audio
Maximum Power Output:
87.0 MHz to 108 MHz
208 W (52 W ✕ 4 ch)
Usable Sensitivity:
9 dBf
Continuous Average Power Output:
17 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
50dB Quieting Sensitivity:
15 dBf
Bass Control Action (60 Hz):
15 dB
Alternate Channel Selectivity:
70 dB
Treble Control Action (10 kHz):
12 dB
Stereo Separation (1 kHz):
35 dB
Line Output Level (CD 1 kHz):
2 V
Frequency Response ( 3 dB):
30 Hz to 15 kHz
General
Power Supply Voltage:
AM Tuner
Frequency Range:
14.4 V DC (10.8 to 15.6 V allowable), negative
ground
531 kHz to 1602 kHz
Current Consumption:
Less than 15 A
Usable Sensitivity:
25 µV
Speaker Impedance:
4 Ω (4 Ω to 8 Ω allowable)
CD Player
System:
Weight / Source unit:
2.86 lb. (1.3 kg)
Compact disc digital audio system
Weight / Remote control unit:
1 oz. (30 g) (including battery)
Usable Discs:
Compact disc
Dimensions / Source unit:
7" (Width) ✕ 2" (Height) ✕ 6-1/6" (Depth)
[178 (W) ✕ 50 (H) ✕ 157 (D) mm]
Frequency Response ( 1 dB):
10 Hz to 20 kHz
Dimensions / Remote control unit:
1-3/4" (Width) ✕ 4-5/16" (Height) ✕ 1-1/8"
(Depth)
Signal to Noise Ratio (1 kHz):
100 dBA
Dynamic Range (1 kHz):
95 dB
[44 (W) ✕ 110 (H) ✕ 27 (D) mm]
Harmonic Distortion:
0.01%
Note:
• Specifications and design are subject to change without notice for further improvement.
28
DXZ535
|