Cateye CC VL800 User Manual

Caution  
Do not concentrate on the computer operations while riding. Always be sure to ride safety.  
Be sure to securely mount the magnet, sensor and bracket on your bicycle, and periodically check to see if any  
parts have loosened.  
CAT EYE VELO5  
CAT EYE VELO8  
®
Used batteries are harmful if swallowed by mistake. They must be disposed in accordance with local regulations.  
Do not leave the main unit exposed to direct sunlight. Never disassemble the main unit.  
For cleaning of the main unit or accessories, use diluted neutral detergent on a soft cloth, and then wipe it off with  
a dry cloth. Do not use paint thinner, benzine or alcohol since such chemicals may damage the surface.  
CATEYE VELO 5  
Package Contents  
1 Bracket  
CYCLOCOMPUTER  
Model CC-VL500/CC-VL800  
English  
2 Wire  
3 Sensor  
4 Magnet  
5 Nylon Ties 7  
IMPORTANT!  
Correct positions of the sensor and the magnet:  
A
B
When rotating the front wheel, the magnet's 4 center must be aligned with the sensor's 3 marking line.  
The distance between the sensor 3 and the magnet 4 must be less than 5mm.  
U.S. Pat. Nos. 4642606, 5236759 and Pat. Pending  
Copyright© 2003 CAT EYE Co., Ltd.  
Name of Parts  
Speed  
0.0 (4.0) to 299.9 km/h [0.0 (3.0) to 185.0 mph]  
Indicates the mode currently selected.  
CCVL5/8-031030 066600280  
Mode Symbol  
1
(The corresponding value is indicated on the lower line.)  
Indicates if the current speed is faster or slower than the average speed.  
Pace Arrow*  
Speed Scale  
(
Faster Slower)  
Sub Display (selected function)  
VELO 5  
VELO 8  
Battery Case Cover  
Contact  
SET  
(on Back)  
CATEYE VELO 5  
CATEYE VELO 8  
*The Pace Arrow feature is only available on the VELO8. Pace Arrows are not displayed on the VELO5.  
Display function  
• Tm* [Elapsed Time]  
0:00'00" to 9:59'59"  
0.00 to 999.99 km [mile]  
F
• Dst  
• Av*  
[Trip Distance]  
[Average Speed]  
0.0 to 299.9 km/h [ 0.0 to 185.0 mph]  
(Measurable up to 27 hrs or 999.99 km/h)  
0.0 (4.0) to 299.9 km/h [0.0(3.0) to 185.0 mph]  
0.0 to 9999.9 kcal (estimated from speed data)  
0.0 to 9999.9 km [mile]  
G
Mx  
[Maximum Speed]  
[Calorie Consumption]  
[Total Distance]  
[Clock]  
• Cal*  
• Odo  
MODE  
0:00' to 23:59'[1:00'to 12:59']  
*
This feature is only available on the VELO8. No measurement is done on the VELO5.  
Start/Stop of Measuring  
The unit starts measuring automatically when you start pedaling, and stops measuring when your come to a stop.  
The upper display always shows the Current Speed.  
Shift of Lower Display  
Each time you press the MODE button, a different data value appears on the lower line.  
e
Power Saving Function  
If the main unit does not receive a signal after about 10 minutes, the main unit enters Power Saving Mode and  
displays the clock count only. To re turn to normal display, press the MODE button or start your bicycle again to  
cancel the Power Saving function.  
Data Reset  
When a screen with the  
Reset  
mark in the OPERATION FLOW is displayed, continue pressing the MODE button  
and the measured data will return to zero. However, the Odometer (total distance) and Clock do not return to zero.  
How to Set Clock  
In the clock mode, press SET button on the back, and the display enters clock setting mode.  
*If Km/h has been selected for speed scale, it becomes 24-hour clock.  
If mph has been selected, it becomes 12-hour clock.  
f
How to Change Tire Size  
Display the Total Distance (Odo) and press the SET button to change the tire size. You can select a tire size in two  
ways: Either select from among preset sizes or enter the tire’s circumference directly in increments of 1 cm.  
INSTALLING THE UNIT  
c
d
Maintenance  
If the contact of the unit or the bracket gets wet, dry it off with a cloth. If they become rusty, it will cause speed  
6
detection error.  
A
B
If the gaps between the buttons and the unit get clogged with mud or sand, wash them away with water.  
Troubleshooting  
No display.  
Has the battery in the main unit run down?  
Replace it with a new one.  
3
Incorrect data appears.  
6
Do all clear operation.  
Current speed does not appear.(First, short-circuit the contact of the main unit a few times with a piece of metal. If current  
speed appears, the main unit is working fine and the cause should be attributed to the bracket or the sensor.)  
Is the clearance between the sensor and the magnet too large?  
Are the magnet's center and the sensor's marking line aligned?  
Re-adjust the positions of the magnet and the sensor. (The clearance should be less than 5mm.)  
Is the cord broken?  
3
4
2
3
5mm  
Even if the outside of the cord looks normal, there could be damage.  
Replace the bracket and sensor set with a new one.  
Is there anything sticking on the contact of the main unit or the bracket?  
Clean the contact with a cloth.  
Current speed disappears when using in the rain.  
1
2
3
Wipe any water or dirt from the contacts and apply a water repellent silicon grease. Do not apply standard grease,  
as it may cause damage to the bracket.  
Replacing Battery  
If the screen becomes dim, it is the time to replace the battery.  
*Insert a new lithium battery (CR2032) with the (+) mark facing up.  
4
g
1 After replacing the battery, perform the all-clear operation. Follow SETTING to select the measurement unit & tire  
size and set the clock display to the current time.  
Specification  
3
3
Battery ---------------------- Lithium Battery CR2032 x 1(battery life: approx. 3 years)  
(*The life of the factory-loaded battery might be shorter than this.)  
Microcomputer ------------- 4-bit 1-chip (Crystal controlled oscillator)  
Display ---------------------- Liquid crystal display  
Sensor ---------------------- No-contact magnetic sensor  
Tire Sizes ------------------- Tire sizes of 16, 18, 20, 22, 24, 26, 700C, and 27 inches, or tire peripheral lengths from 100 to 299  
cm (Initial value: 26 in.)  
5
Working Temperature ------ 0°C - 40°C  
Length of Wire ------------- 70cm  
Dimension/Weight --------- 1-7/8" x 1-25/32" x 23/32" (48 x 45 x 18 mm) / 1.06 oz ( 30 g)  
*The specifications and design are subject to change without notice.  
4
5
7
1
CalorieConsumption*1(VELO8)  
The calorie consumption data is only the accumulated value that is  
calculated from the speed data of every second. It differs from the  
actual consumed calorie.  
6
1
km/h  
Speed  
Kcal per hour  
10 km/h  
67.3 kcal  
20 km/h  
244.5 kcal  
30 km/h  
641.6 kcal  
mph  
Speed  
Click  
10 mph  
155.2 kcal  
20 mph  
768.2 kcal  
30 mph  
2297.2 kcal  
5
Kcal per hour  
SETTING  

Blaupunkt San Diego DJ31 User Manual
Boston Acoustics SC85 User Manual
Bryan Boilers EB 75 S150 FDG User Manual
Carson Manufacturing Company, Inc Car Amplifier 1012 User Manual
Exido 246 015 User Manual
FujiFilm 16209581 User Manual
Hitachi Deskstar 7K80 User Manual
JVC CS ARS680 User Manual
JVC GR AX18EG User Manual
JVC GR SXM320 User Manual