Thank you for purchasing a Canon product.
The EOS DIGITAL REBEL XT/EOS 350D DIGITAL is a high-
performance, digital AF SLR camera enabling highly versatile and
speedy shooting. The camera has an 8-megapixel, high-resolution
CMOS sensor, and it is compatible with all Canon EF lenses (including
the EF-S lenses). The camera features quick shooting at anytime,
shooting modes for all types of photography from fully automatic
shooting to manual shooting, direct printing, and more.
Before using the camera, read this Instruction Manual to familiarize
yourself with the camera.
To prevent botched pictures and accidents, read the Safety Warnings
(p.6,7) and Handling Precautions (p.8,9).
Test the Camera Before Using
Before using the camera, take a few test shots and check that the images are
being properly recorded onto the memory card. If the camera or memory card is
faulty and the images cannot be recorded on the card or be read by a personal
computer, Canon cannot be held liable for any data loss.
Copyrights
Copyright laws in your country may prohibit the use of your recorded images of
people and certain subjects for anything but private enjoyment. Also be aware that
certain public performances, exhibitions, etc., may prohibit photography even for
private enjoyment.
¡Canon and EOS are trademarks of Canon Inc.
¡Adobe is a trademark of Adobe Systems Incorporated.
¡ArcSoft, ArcSoftlogo, ArcSoft PhotoStudio are trademarks or registered trade-
marks of ArcSoft, Inc.
¡CompactFlash is a trademark of SanDisk Corporation.
¡Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
¡Macintosh is a registered trademark of Apple Corporation in the United States
and other countries.
¡All other corporate names and trademarks mentioned in this manual are the
property of their respective owners.
*
This digital camera supports Design rule for Camera File System 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is a standard that enhances
compatibility between digital cameras and printers. By connecting to an Exif
Print-compliant printer, the shooting information is incorporated to optimize the
print output.
2
Item Check List
Check that all the following items have been included with your camera.
If anything is missing, contact your dealer.
¢ EOS DIGITAL REBEL XT/EOS 350D DIGITAL / Camera body (with eyecup,
body cap and lithium backup battery for the date and time)
¢ EF-S18-55mm f/3.5-5.6 II / Lens (with lens cap and dust cap) * Lens kit only.
¢ Battery Pack NB-2LH (with protective cover)
¢ Battery Charger CB-2LW/CB-2LWE *CB-2LW or CB-2LWE is included.
¢ Power cord for battery charger *For CB-2LWE.
¢ Interface Cable IFC-400PCU
¢ Video Cable VC-100
¢ Wide Strap EW-100DBll (with eyepiece cover)
¢ EOS DIGITAL Solution Disk (CD-ROM)
¢ ArcSoft PhotoStudio Disk (CD-ROM)
¢ Software Instruction Manual (CD-ROM, PDF)
¢ Pocket Guide
Quick start guide to shooting.
¢ EOS DIGITAL REBEL XT/EOS 350D DIGITAL INSTRUCTION
MANUAL (this booklet)
¢ Software Guide
Gives an overview of the bundled software and explains the software
installation procedure.
¢ Battery Pack NB-2LH Instructions
¢ Lens Instructions *Lens Kit only.
¢ Camera warranty card
¢ Lens warranty card *Lens Kit only.
* Be careful not to lose any of the above items.
* No CF card (for recording images) is included. Please purchase it separately.
CF cards made by Canon are recommended.
3
Contents
Introduction
Item Check List..................................................................................................3
Handling Precautions ........................................................................................8
Quick Start Guide ............................................................................................10
Nomenclature ..................................................................................................12
Conventions Used in this Manual....................................................................18
Getting Started
19
1
Recharging the Battery....................................................................................20
Installing and Removing the Battery................................................................22
Using a Household Power Outlet ....................................................................24
Mounting and Detaching a Lens......................................................................25
Installing and Removing the CF Card..............................................................26
Basic Operation...............................................................................................28
Menu Operations.............................................................................................31
Setting the Language ......................................................................................36
Setting the Date and Time...............................................................................37
Replacing the Date/Time Battery.....................................................................38
Cleaning the CMOS sensor.............................................................................39
Set the power-off time/Auto power off .............................................................41
CF Card Reminder ..........................................................................................41
Dioptric Adjustment .........................................................................................42
Holding the Camera.........................................................................................42
Fully Automatic Shooting
43
2
3
Using Full Auto ................................................................................................44
Basic Zone Modes...........................................................................................46
Self-timer Operation ........................................................................................48
Wireless Remote Control.................................................................................49
Using the Eyepiece Cover...............................................................................50
Silencing the Beeper .......................................................................................50
Image Settings
51
Setting the Image-recording Quality................................................................52
Setting the ISO Speed.....................................................................................55
Setting the White Balance ...............................................................................56
Custom White Balance....................................................................................57
White Balance Correction................................................................................59
White Balance Auto Bracketing.......................................................................60
Setting the Color Space...................................................................................62
Selecting the Processing Parameters .............................................................63
Setting the Processing Parameters.................................................................64
File Numbering Methods .................................................................................67
Checking Camera Settings..............................................................................68
Setting the AF, Metering, and Drive Modes
Selecting the AF Mode ....................................................................................70
69
4
4
Contents
Selecting the AF Point..................................................................................... 73
Using Focus Lock............................................................................................ 75
When Autofocus Fails (Manual Focusing).......................................................76
Selecting the Metering Mode........................................................................... 77
Selecting the Drive Mode ................................................................................ 78
1
Advanced Operations
79
5
Program AE..................................................................................................... 80
Shutter-Priority AE........................................................................................... 82
Aperture-Priority AE ........................................................................................ 84
Depth of Field Preview .................................................................................... 85
Manual Exposure ............................................................................................ 86
Automatic Depth-of-Field AE........................................................................... 88
Setting Exposure Compensation.....................................................................89
Auto Exposure Bracketing (AEB) ....................................................................90
AE Lock........................................................................................................... 92
Bulb Exposures ............................................................................................... 93
Mirror Lockup .................................................................................................. 94
2
3
4
5
6
7
8
9
10
Flash Photography
95
6
7
Using the Built-in Flash ................................................................................... 96
Using EOS-Dedicated, External Speedlites ..................................................101
Using Non-Canon Flash Units....................................................................... 102
LCD Panel Illumination.................................................................................. 102
Image Playback
103
Setting the Image Review Time ....................................................................104
Auto Image Rotation...................................................................................... 105
Setting the LCD Brightness........................................................................... 106
Image Playback............................................................................................. 107
Single image display, Index Display, Magnified View ........................107 - 110
Jump Display, Auto Play, Rotating an Image.....................................111 - 113
Displaying the Images on TV ........................................................................ 114
Protecting Images ......................................................................................... 115
Erasing Images ............................................................................................. 116
Formatting the CF Card................................................................................. 118
Direct Printing from the Camera
Preparing to Print .......................................................................................... 121
PictBridge / CP Direct / Bubble Jet Direct ............................................124 - 133
Easy Printing ................................................................................................. 136
119
8
DPOF: Digital Print Order Format
Customizing the Camera
Reference
137
9
10
11
145 11
151
5
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke
or fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
6
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
may become moist and short-circuit the outlet to cause a fire.
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
7
Handling Precautions
Camera Care
¡This camera is a precision instrument. Do not drop it or subject it to physical
shock.
¡The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe with a well-wrung wet cloth.
¡Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
¡Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
¡The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
¡Use a blower to blow away dust on the lens, viewfinder, mirror, and focusing
screen. Do not use cleaners that contain organic solvents to clean the
camera body or lens.For stubborn dirt, take the camera to a Canon Service
Center.
¡Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
¡If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
¡If condensation forms on the camera, do not use the camera.This is to avoid
damaging the camera. If this occurs, remove the lens, CF card and battery
from the camera, then wait until the condensation has evaporated before
using the camera.
¡If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
¡Avoid storing the camera where there are corrosive chemicals such as in a
darkroom or chemical lab.
¡If the camera has not been used for an extended period, test all its functions
before using the camera. If you have not used the camera for some time or if
there is an important shoot coming up, have the camera checked by your
Canon dealer or check the camera yourself and make sure it is working
properly.
8
Handling Precautions
LCD Panel and LCD Monitor
¡Although the LCD monitor is manufactured with very high precision
technology with over 99.99% active pixels, there might be a few dead pixels
among the remaining 0.01% or less pixels. Dead pixels displaying only black
or red, etc., are not a malfunction. They do not affect the images recorded.
¡At low temperatures, the liquid-crystal display response may become slower.
And at high temperatures, the display may blacken. In either case, the
display will return to normal at room temperature.
CF Card
¡The CF card is a precision device. Do not drop the memory card or subject it
to vibration. Doing so could damage the images recorded on them.
¡Do not store or use a memory card near anything having a strong magnetic
field such as a TV set, speakers, or magnet. Also avoid places prone to
having static electricity. Otherwise, the images recorded on the CF card
might be lost.
¡Do not leave memory cards in direct sunlight or near a heat source. Doing so
can warp the cards and make them unusable.
¡Do not spill any liquid onto the CF card.
¡Always store your CF cards in a case to protect the data stored on them.
¡Non-Canon CF cards may not be able to record and playback images. Using
Canon CF cards is recommended.
¡Do not bend the card or subject it to any excessive force or physical shock.
¡Do not store CF cards in hot, dusty, or humid locations.
Contacts
Lens Electrical Contacts
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
9
Quick Start Guide
Insert the battery. (p.22)
To recharge the battery, see page 20.
1
Attach the lens. (p.25)
For EF-S lens
For EF lens
2
3
4
When attaching an EF-S lens, align it
with the white dot on the camera. For
other lenses, align it with the red dot.
Set the lens focus mode switch
to <AF>. (p.25)
Open the CF card slot
cover and insert a CF
card. (p.26)
Face the label side toward you
and insert the end with the
small holes into the camera.
Set the power switch to <1>.
(p.28)
5
10
Quick Start Guide
1
Set the Mode Dial to < > (Full
Auto). (p.44)
6
7
All the necessary camera settings will
be set automatically.
Focus the subject. (p.28)
Aim the AF point over the subject and
press the shutter button halfway to
autofocus.
Take the picture. (p.28)
Press the shutter button fully to take
the picture.
8
9
Review the picture on the LCD
monitor. (p.104)
The captured image will be displayed
for about 2 sec. on the LCD monitor.
¡ To view images captured so far, see “Image Playback” (p.107).
¡ To delete an image, see “Erasing Images” (p.116).
11
Nomenclature
For detailed information, reference page numbers are provided in
parentheses (p.**).
Built-in flash/AF-assist beam (p.96/74)
EF Lens mount index (p.25)
Mode Dial (p.16)
Power switch (p.28)
EF-S Lens mount index (p.25)
Flash-sync contacts
<6> Main Dial
(p.29)
Hot shoe (p.101)
Shutter button
(p.28)
Strap mount (p.19)
Red-eye
reduction/
Self-timer lamp
(p.98/48)
<D> Flash
button (p.96)
Terminal cover
Remote control
sensor (p.49)
Lens release
button (p.25)
Grip
Depth-of-field preview
button (p.85)
Mirror (p.39,94)
Contacts (p.9)
Lens lock pin
Lens mount
Video OUT terminal (p.114)
Remote control terminal
(for Remote Switch RS-60E3)
Body cap (p.25)
Digital terminal (p.122)
12
Nomenclature
Dioptric adjustment knob (p.42)
Eyecup (p.50)
<Q/i> Drive mode selection button
(p.78)
<O> Aperture/Exposure
compensation button (p.86/89)
Viewfinder eyepiece
<A/I> AE lock/FE
lock button/Index/Reduce
button (p.92/99/109/110,134)
LCD panel (p.14)
<M> Menu
button (p.31)
<S/u> AF point
selection/Enlarge
button (p.73/110,134)
<B> Info/
Trimming orientation
button (p.68,107/134)
<C> Jump
button (p.111)
CF card slot
cover (p.26)
<x> Playback
button (p.107)
<L> Erase
button (p.116)
DC cord hole
(p.24)
LCD monitor (p.34)
<l/U> Direct print/
LCD panel illumination
button (p.136/102)
Battery compartment
cover release lever
(p.22)
Tripod socket
Battery compartment
cover (p.22)
Access lamp (p.27)
<0> Setting button (p.31)
Cross keys (p.30)
<WZ> ISO speed set button (p.55)
<XB> White balance selection button (p.56)
<Yq> Metering mode selection button (p.77)
<ZE> AF mode selection button (p.70)
CF card slot (p.26)
CF card eject button (p.26)
13
Nomenclature
LCD Panel
Aperture
Shots remaining
Shots remaining during
WB bracketing
-
AF point selection ([ - - - - - ])
-
Self-timer/Remote control countdown
Bulb exposure time
CF card full warning (FuLL CF)
CF card error warning (Err CF)
No CF card warning (no CF)
Error code (Err)
Metering mode
qEvaluative metering
wPartial metering
Cleaning image sensor (CLEA n)
eCenter-weighted average
metering
Shutter speed
Image-recording quality
73 Large/Fine
83 Large/Normal
74 Medium/Fine
84 Medium/Normal
76 Small/Fine
86 Small/Normal
173
Busy (buSY)
Built-in flash recycling
(buSY)
White balance
Q Auto
W
E
R
Y
Daylight
Shade
RAW+Large/Fine
1RAW
Cloudy
Tungsten light
U
White
fluorescent
light
KCustom Function
Drive mode
I
Flash
uSingle shooting
O
Custom
i Continuous
shooting
hAEB
QSelf-timer/
Remote control
yFlash exposure
compensation
0Monochrome
shooting
AF mode
X One-Shot AF
Exposure level indicator
Exposure compensation amount
AEB range
9
Z
AI Focus AF
AI Servo AF
Battery check
CF card writing status
z x
n
The actual display will show only the applicable items.
14
Nomenclature
Viewfinder Information
AF point display indicator < >
AF points
Focusing screen
<A> AE lock/FE lock
<o> Focus confirmation
AEB in-progress
light
<D> Flash-ready
Max. Burst
Improper FE lock warning
<O> High-speed sync
(FP flash)
Exposure level indicator
Exposure compensation amount
AEB range
<y> Flash exposure
Red-eye reduction lamp-on indicator
compensation
<L> Red-eye reduction
Shutter speed
FE lock (FEL)
Busy (buSY)
CF card full warning (FuLL CF)
CF card error warning (Err CF)
No CF card warning (no CF)
Built-in flash recycling (D buSY)
Aperture
The actual display will show only the applicable items.
15
Nomenclature
Mode Dial
The Mode Dial is divided into two function zones.
e
Full Auto
q Basic Zone
All you do is press the shutter
button.
w Creative Zone
Set the camera as you wish.
d
s
: Program AE (p.80)
: Shutter-priority AE
(p.82)
1
: Full Auto (p.44)
For fully automatic shooting.
f
a
: Aperture-priority AE
(p.84)
: Manual exposure
(p.86)
Image Zone
Fully automatic shooting for
specific subjects.
2
: Portrait (p.46)
8
: Automatic Depth-of-
field AE (p.88)
3
4
5
6
: Landscape (p.46)
: Close-up (p.46)
: Sports (p.47)
: Night Portrait (p.47)
: Flash Off (p.47)
7
16
Nomenclature
Battery Charger CB-2LW
This is a battery pack charger. (p.20)
Battery pack slot index
Battery pack slot
Recharge lamp
Power plug
Battery Charger CB-2LWE
This is a battery pack charger. (p.20)
Battery pack slot
Power cord
Recharge lamp
Power cord socket
17
Conventions Used in this Manual
¡The <6> icon indicates the Main Dial.
6
¡
The <
keys. The <
the up, down, left, and right cross keys respectively.
S
>, <
V
>, and <
U
> icons indicate the cross
W
>, <X>, <
Y
>, and < > icons indicate
Z
¡In the text, the <0> icon indicates the SET button. It
0
is used for menu functions and Custom Functions.
¡In this manual, the icons and markings indicating the camera’s
buttons, dials, and settings correspond to the icons and markings on
the camera.
¡For detailed information, reference page numbers are provided in
parentheses (p.**).
¡The asterisk M on the right of the page title indicates that the
respective feature is available only in Creative Zone modes (d, s,
8
f, a,
).
¡All operations explained in this Instruction Manual assume that the
power switch is already set to <1>.
¡The Canon EF-S18-55mm f/3.5-5.6 ll lens is used as the sample lens
in this Instruction Manual.
¡The procedures assume that the menu settings and Custom
Functions are set to the default settings.
¡
The
3
icon indicates that the setting can be changed with the menu.
¡(0), (9) or (8) indicates that the respective function remains
active for 4 sec., 6 sec., or 16 sec. respectively after you let go of the
button.
¡This manual uses the following alert symbols:
:
The Caution symbol indicates a warning to prevent shooting problems.
:The Note symbol gives supplemental information.
18
1
Getting Started
This chapter explains a few preliminary steps and basic
camera operations.
Attaching the Strap
Pass the end of the strap through
the camera’s strap mount from the
bottom. Then pass it through the
strap’s buckle as shown in the
illustration. Pull the strap to take up
any slack and make sure the strap
will not loosen from the buckle.
¡ The eyepiece cover is also
attached to the strap. (p.50)
Eyepiece cover
19
Recharging the Battery
For details on the battery, refer to the instructions for Battery Pack NB-2LH.
Remove the cover.
1
Attach the battery.
¡ Align the battery’s front edge with the
2
battery charger’s index line. While
pressing down the battery, slide it in
the direction of the arrow.
¡ To detach the battery, follow the
Battery pack slot index
above procedure in reverse.
For CB-2LW
CB-2LW
3 Flip out the prongs and recharge
the battery.
¡ As shown by the arrow, flip out the
battery charger’s prongs.
¡ Insert the prongs into a power outlet.
For CB-2LWE
CB-2LWE
Connect the power cord and
recharge the battery.
¡
Connect the power cord to the charger
and insert the plug into the power outlet.
s Recharging starts automatically and
the recharge lamp turns orange.
s When the battery is fully recharged,
the recharge lamp will turn green.
¡ It takes about 90 minutes to fully
recharge a completely exhausted
battery.
20
Recharging the Battery
¡ Do not use the battery charger to recharge any battery other than
Battery Pack NB-2LH.
¡ To prevent the battery performance from degrading, avoid recharging the
battery pack for 24 consecutive hours or longer.
¡ If the battery is left in the camera for a prolonged period without the
camera being used, a low electrical current may be discharged
excessively and the battery’s service life may be affected. When not
using the camera, remove the battery and attach the protective cover to
prevent shorting. Before using the camera again, be sure to recharge the
battery.
¡ You can attach the protective cover to the battery
and set the direction of the cover marking to
indicate whether the battery has been recharged
or not.
¡ After recharging the battery, detach it and unplug
the power cord from the power outlet.
¡ The time required to recharge the battery depends on the ambient
temperature and the battery’s recharge level.
¡ The battery pack can operate in temperatures from 0°C to 40°C (32°F to
104°F). However, for full operating performance, using it between 10°C
(50°F) and 30°C (86°F) is recommended. In cold locations such as ski
areas, battery performance temporarily decreases and the effective time
may be shorter.
¡ If effective time is sharply reduced even after normal recharging, the
battery pack may have reached its service life. Replace it with a new
battery.
21
Installing and Removing the Battery
Installing the Battery
Load a fully-charged Battery Pack NB-2LH into the camera.
Open the battery compartment
cover.
¡ Slide the lever as shown by the arrow
1
and open the cover.
Insert the battery.
¡ Point the battery contacts downward.
¡ Insert the battery until it locks into
2
place.
Close the cover.
¡ Press the cover until it snaps shut.
3
Checking the Battery Level
When the power switch is set to <1> (p.28), the battery level will be
indicated in one of three levels:
z : Battery level OK.
x : Battery level is low.
n: Battery must be recharged.
22
Installing and Removing the Battery
[Number of shots]
Battery Life
Temperature
Shooting Conditions
No Flash
Approx. 600
Approx. 450
50% Flash Use
Approx. 400
Approx. 350
At 20°C / 68°F
At 0°C / 32°F
¡ The figures above are based on a fully-charged NB-2LH and CIPA (Camera &
Imaging Products Association) testing criteria.
¡ The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
¡ The number of possible shots will decrease with more frequent use of
the LCD monitor.
¡ Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
¡ The lens operation is powered by the camera’s battery. Using certain
lenses can reduce the number of possible shots.
Removing the Battery
Open the battery compartment
cover.
¡ Slide the lever as shown by the arrow
1
and open the cover.
Remove the battery.
2
¡ Slide the battery lock lever as shown
by the arrow and remove the battery.
¡ To prevent shorting, be sure to attach
the protective cover to the battery.
23
Using a Household Power Outlet
With AC Adapter Kit ACK-DC20 (optional), you can connect the camera
to a household power outlet and not worry about the battery level.
Connect the power cord.
1
¡ Connect the power cord to the
compact power adapter.
¡ Insert the plug into a power outlet.
¡ When you are finished, disconnect
the plug from the power outlet.
Connect the DC Coupler DR-700.
2
¡ Insert the compact power adapter’s
DC plug to the DC Coupler DR-700’s
socket.
¡ DC Coupler DR-20 is cannot be used
with this camera.
Insert the DC Coupler.
3
¡ Open the cover and insert the DC
Coupler until it locks in place.
Push in the DC cord.
4
¡ Flip down the DC cord notch cover
and push the cord into the notch.
¡ Close the cover.
Do not connect or disconnect the power cord while the camera’s power
switch is set to <1>.
24
Mounting and Detaching a Lens
Mounting a Lens
Remove the caps.
¡ Remove the rear lens cap and the
1
body cap by turning them as shown
by the arrow.
EF-S lens mount index
Attach the lens.
2
¡ Align the EF-S lens with the camera’s
white EF-S lens mount index and turn
the lens as shown by the arrow until it
clicks in place.
¡
When attaching a lens other than an
EF-S lens, align the lens with the red
EF lens index mark.
EF lens mount index
On the lens, set the focus mode
3 switch to <AF>.
¡ If it is set to <MF>, autofocus will not
be possible.
Remove the front lens cap.
4
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
¡ Turn the lens until it stops, then
detach it.
When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.
25
Installing and Removing the CF Card
The captured image will be recorded onto the CF card (optional).
Although the thickness is different, a Type I or Type II CF card can be
inserted into the camera.The camera is also compatible with Microdrive
and CF cards with 2 GB or higher capacity.
Installing the Card
Open the cover.
¡ Slide the cover as shown by the arrow
1
to open it.
Insert the CF card.
¡ Using Canon CF cards is
recommended.
Top
2
¡ If the CF card is inserted in the
wrong way, it may damage the
camera. As shown in the
illustration, face the label side
toward you and insert the end with
the small holes into the camera.
s The CF card eject button pops up.
CF card
eject button
Close the cover.
3
¡ Close the cover and slide it in the
direction shown by the arrow until it
snaps shut.
¡ When you set the Power switch to
<1>, the number of remaining
shots will be displayed on the LCD
panel.
Shots remaining
The shots remaining depends on the remaining capacity of the CF card and
the ISO speed setting.
26
Installing and Removing the CF Card
Removing the Card
Open the cover.
1
¡ Set the Power switch to <2>.
¡ Check that the “buSY” message is
not displayed on the LCD panel.
¡ Make sure the access lamp is off,
then open the cover.
Access lamp
Remove the CF card.
2
¡ Press the Eject button.
s The CF card will be ejected.
¡ Close the cover.
¡ A blinking access lamp indicates that data is being transferred or
read, written, or erased on the CF card. Never do the following while
the access lamp is lit or blinking. Such actions may destroy the
image data. It may also damage the CF card or camera.
• Shaking or banging the camera around.
• Opening the CF card slot cover.
• Removing the battery.
¡ If you use a CF card already containing recorded images, the images
recorded thereafter by the camera might be appended with a file number
that continues on from the images already recorded on the CF card.
If you want to start the file numbering from 0001, set [Auto reset] for the
file numbering (p.67), then use a newly formatted CF card.
¡ If “Err CF” (Error CF) is displayed on the LCD panel, see page 118.
¡
If you use a low-capacity CF card, it might not be able to record large images.
¡ Compared to CF cards, Microdrive cards are more vulnerable to
vibration and physical shock. If you use a Microdrive, be careful not to
subject the camera to vibration or physical shock especially while
recording or displaying images.
On the menu, if you set the [c Shoot w/o card] to [Off], it will prevent you
from shooting without a CF card. (p.41)
27
Basic Operation
Power Switch
The camera can operate only after the power switch is turned on.
<1> : The camera operates.
<2>: The camera is turned off and does
not operate. Set to this position
when not using the camera.
¡
To save battery power, the camera turns off automatically after 1 minute of
non-operation. To turn on the camera again, just press the shutter button.
¡ You can change the auto power-off time with the menu’s [c Auto
power off] setting. (p.41)
¡ If you turn the power switch to <2> while the captured images are
being recorded onto the CF card, the remaining number of captured
images to be recorded will be indicated on the top LCD panel with the
number of <N> symbols displayed.When all the images are finished
recording, the display will turn off and the camera will turn off.
Shutter Button
The shutter button has two steps.You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing (AF) and
automatic exposure (AE) that sets the
shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed on the top LCD
panel and in the viewfinder. (0)
Pressing completely
This releases the shutter and takes the
picture.
28
Basic Operation
¡
If you press the shutter button halfway and (0) elapse, you must press it
halfway again and wait a moment before pressing it completely to take a
picture. If you press the shutter button completely without pressing it halfway
first or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
¡ No matter what state the camera is in (image playback, menu operation,
image recording, etc.), you can return to shooting instantly just by
pressing the shutter button halfway (except during direct printing).
¡
Camera movement during the moment of exposure is called camera shake. To
prevent camera shake, note the advice below. Also see “Holding the Camera” (p.42).
• Hold the camera steady.
• Put your finger tip on the shutter button, hold the camera with your right
hand, then press the shutter button gently.
Operating the <6> Dial
The <6> dial is mainly used for shooting-related settings.
After pressing a button, turn the
(1)
<6> dial.
When you press a button, its function
remains on for 6 seconds (9). While
turning the < > dial, look at the setting
6
in the viewfinder or on the top LCD panel.
When the timer ends or if you press the
shutter button down halfway, the camera
will be ready to shoot.
¡ Use it to select the AF point.
¡
After pressing the <
M> button, turn the
<
6
> dial to select the desired menu item.
Turn the <6> dial only.
(2)
While looking at the LCD panel or viewfinder,
turn the <
6> dial to set the desired setting.
¡ In this way, you can set the shutter
speed, aperture, etc.
29
Basic Operation
Operating the <S> Cross Keys
The <S> key is mainly used for shooting-related settings and selecting
LCD monitor menu items.
Press the <S> key
(1)
independently.
With the camera ready to shoot, you can
press any <S> key to quickly use the
key’s respective menu function.
<WZ> ISO speed
<XB> White balance
<YQ> Metering mode
<ZE> AF mode
Press the <S> key to select the desired
setting, then press <0>.
Press a button, then press the
(2)
<S> key.
When the camera is ready to shoot and
you press a button, the button’s function
remains on for 6 seconds (9). While
the function remains on, press the <S>
key while looking in the viewfinder or at
the LCD panel.
When the function timer ends or if you
press the shutter button halfway, the
camera will be ready to shoot.
¡ Use it to select the AF point.
¡ When using the LCD monitor (which
has no display timer), you can select
menu items or select images for
playback.
30
Menu Operations
With the menus, you can set various settings such as the image
recording quality, processing parameters, the date/time, and Custom
Functions. While looking at the LCD monitor, you use the <M>
button, <S> Cross keys, and <0> button on the camera back.
<M> button
<0> button
<C> button
<S> Cross keys
LCD Monitor
Playback menu
Set-up 1 menu
Shooting 2 menu
Shooting 1 menu
Tab
Set-up 2 menu
Menu items
Menu settings
Icon
z/m
x
Color
Category
Description
Red
Blue
Shooting menu Shooting-related menu.
Playback menu Image playback-related menu.
Yellow Set-up menu
Camera’s basic settings.
c/b
¡ To change the menu tab, press the <C> button.
¡
¡
When a Basic Zone mode is set, there are menu items which will not be displayed. (p.33)
You can also use the <
6> dial to select menu items or playback images.
¡ Even while the menu is displayed, you can instantly go back to shooting
by pressing the shutter button halfway.
31
Menu Operations
Menu Setting Procedure
Display the menu.
1
¡ Press the <M> button to display
the menu.To turn off the menu, press
the button again.
Select a tab.
2
3
4
¡
¡
Press the <
If the five tabs are highlighted, you can
also press the < > keys to select a tab.
C> button to select a menu tab.
U
Select a menu item.
¡ Press the <V> key to select the
menu item, then press <0>.
¡ If you press the <C> button now,
another tab will be selected.
Select the menu setting.
¡ Press the <V> or <U> key to
select the setting. (Some settings
require you to press either the <V>
or <U> key to select it.)
Set the desired setting.
¡ Press <0> to set it.
5
6
Exit the menu.
¡ Press the <M> button to exit the
menu display.
¡ The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
¡ Menu operation will also work after the picture is taken while the image is
being recorded to the CF card (access lamp blinks).
32
Menu Operations
Menu Settings (1)
Reference
pages
<z> Shooting 1 menu (Red)
Quality
Red-eye On/Off
Beep
73/83/74/84/76/86/ RAW+7L / RAW
Off / On
52
98
50
70
On / Off
AF mode
ONE SHOT / AI FOCUS / AI SERVO
q: Evaluative / w: Partial / e: Center-weighted
average metering
Metering mode
ISO speed
77
55
100 / 200 / 400 / 800 / 1600
<m> Shooting 2 menu (Red)
AEB
Flash exp comp
White balance
1/3-stop increments, 2 stops
90
100
56
59
60
57
62
63
64
1/3-stop increments, 2 stops
Q / W / E / R / Y / U / I / O
WB correction: B/A/M/G bias, 9 levels each
WB-BKT: B/A and M/G bias 1 level, 3 levels
Manual setting of white balance
sRGB / Adobe RGB
WB SHIFT/BKT
Custom WB
Color space
Parameters
Parameter 1, 2 / Set 1, 2, 3 / B/W
<x> Playback menu (Blue)
Protect
Rotate
Print order
Auto play
Review time
Erase-protect image
115
113
137
112
104
Rotate vertical image
Specifies images to be printed (DPOF).
Auto playback of images
Off / 2 sec. / 4 sec. / 8 sec. / Hold
¡ <m> Shooting 2 menu screen/tubs are not displayed in Basic Zone
modes.
¡ These shaded menu items are not displayed in Basic Zone modes.
¡ In Basic Zone modes, the RAW+7L and RAW recording quality modes
are not displayed.
33
Menu Operations
Menu Settings (2)
Reference
pages
<c> Set-up 1 menu (Yellow)
Auto power off
1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min. / Off 41
Auto rotate
LCD brightness
Date/Time
File numbering
Format
Shoot w/o card
On / Off
105
106
37
5 levels
Setting the date/time
Continuous / Auto reset
Initializes and erases card
On / Off
67
118
41
<b> Set-up 2 menu (Yellow)
15 languages
(English, German, French, Dutch, Danish, Finnish,
Language
Italian, Norwegian, Swedish, Spanish, Simplified
Chinese, Russian, Traditional Chinese, Korean,
and Japanese.)
36
Video system
Communication
NTSC / PAL
114
121
Print/PTP / PC connection
Custom Functions
(C.Fn)
Customize the camera
146
35
Clear all camera settings (Resets the camera to
the default settings.)
Clear settings
Clear all Custom Functions (Resets all Custom
Function settings to the default.)
Select to clean the sensor.
147
Sensor cleaning
Firmware Ver.
39
-
Select to update the firmware.
These shaded menu items are not displayed in Basic Zone modes.
About the LCD Monitor
¡ The LCD monitor cannot be used as a viewfinder for shooting.
¡ Adjust the LCD monitor’s brightness to one of five levels with the
[c LCD brightness] menu. (p.106)
34
Menu Operations
Restoring the Camera’s Default SettingsN
Select [Clear settings].
1
¡ Select the [b] tab.
¡ Press the <V> key to select [Clear
settings], then press <0>.
Select [Clear all camera settings].
2
3
¡ Press the <V> key to select [Clear
all camera settings], then press
<0>.
Select [OK].
¡ Press the <U> key to select [OK],
then press <0>. The camera’s
default settings will be restored.
s The camera’s default settings will be
as shown below.
Image-Recording Settings
Shooting Settings
AF mode
ONE SHOT
Quality
73
AF point selection Automatic AF point selection ISO speed
100
Metering mode
Drive mode
q
(Evaluative metering)
Color space
sRGB
u (Single shooting)
White balance
WB correction
WB bracketing
Parameters
Q (Auto WB)
Off
Exposure
compensation
0 (Zero)
Off
Off
AEB
Parameter 1
Flash exposure
0 (Zero)
compensatio
n
Custom Functions Current settings retained
In Basic Zone modes, the camera settings cannot be reset to the default.
35
3 Setting the Language
The LCD monitor’s interface language can be set to one of fifteen
languages.
Select [Language].
1
¡ Select the [b] tab.
¡ Press the <V> key to select
[Language], then press <0>.
s The Language screen will appear.
Set the desired language.
2
¡ Press the <S> key to select the
desired language, then press <0>.
s The interface language will change.
English
Deutsch
Français
Nederlands
Dansk
English
German
French
Dutch
Danish
Suomi
Finnish
Italiano
Italian
Norsk
Norwegian
Swedish
Spanish
Svenska
Español
䈆ᗙᒳⰍ
̷͚͑͘͘͏͐
Simplified Chinese
Russian
Traditional Chinese
Korean
䓇ᗙᒳⰍ
뼗霨꽯
Japanese
Ⱬⶲ儤
36
3 Setting the Date and Time
Set the date and time as shown below.
Select [Date/Time].
1
¡ Select the [c] tab.
¡ Press the <V> key to select [Date/
Time], then press <0>.
s The date/time screen will appear.
Set the date and time.
¡ Press the <V> key to select the
digit, then press <0>.
¡ The selection will then shift to the
next item.
2
3
4
Set the date display format.
¡ Press the <V> key to set the date
format to [mm/dd/yy], [dd/mm/yy], or
[yy/mm/dd].
Press <0>.
s The date and time will be set and the
menu will reappear.
Each captured image is recorded together with the date and time it was
taken. If the date and time are not properly set, the wrong date/time will be
recorded with the images. Make sure you set the date and time correctly.
37
Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera’s date and time.
The battery’s service life is about 5 years. If the date/time is reset when
the battery is replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
Set the power switch to <2>.
1
Open the cover and remove the
2 battery.
Take out the battery holder.
3
Replace the battery.
¡ Make sure the battery is in the proper
(+) (–)
4
+ – orientation.
Insert the battery holder and
5 close the cover.
For the date/time battery, be sure to use a CR2016 lithium battery.
38
3 Cleaning the CMOS sensorN
The image sensor is like the film in a film camera.If any dust or other
foreign matter adheres to the image sensor, it may show up as a dark
speck in the images. To avoid this, follow the procedure below to clean
the image sensor. Note that the image sensor is a very delicate
component. If possible, you should have it cleaned by a Canon Service
Center.
While you clean the image sensor, the camera must be turned on.
Using the AC Adapter Kit ACK-DC20 (optional, see page 158) is
recommended. If you use a battery, make sure the battery level is
sufficient. Before cleaning the sensor, detach the lens from the camera.
Install the DC Coupler (p.24) or a
1
battery and set the power switch
to <1>.
Select [Sensor cleaning].
2
¡ Select the [b] tab.
¡ Press the <V> key to select
[Sensor cleaning], then press <0>.
s If you are using a battery with
sufficient power, the screen shown in
step 3 will appear.
¡ If the battery is exhausted, a warning
message will appear and you will not
be able to proceed further. Either
recharge the battery or use a DC
coupler and start from step 1 again.
Select [OK].
¡ Press the <U> key to select [OK],
3
then press <0>.
s In a moment, the mirror will lockup
and the shutter will open.
s “CLEA n” will blink on the LCD panel.
39
3 Cleaning the CMOS sensorN
Clean the image sensor.
4
¡ Use a rubber blower (commercially
available) to carefully blow away any
dust on the surface of the CMOS
sensor.
Stop the cleaning.
5
¡ Set the power switch to <2>.
s The camera will turn off, the shutter
will close, and the mirror will go back
down.
¡ Set the power switch to <1>. You
can start shooting again.
¡ During the sensor cleaning, never do any of the following that
would turn off the power. If the power is cut off, the shutter will
close and it may damage the shutter curtains and image sensor.
• Set the power switch to <2>.
• Opening the CF card slot cover.
• Opening the battery compartment cover.
¡ Do not insert the blower tip inside the camera beyond the lens mount. If
the power goes out, the shutter will close and the shutter curtains and
image sensor may be damaged.
¡ Use a blower not attached with a brush. A brush can scratch the sensor.
¡ Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
¡ When the battery is exhausted, the beeper will sound and the <c>
icon will blink on the LCD panel. Set the power switch to <2>, replace
the battery, and start over.
¡ You cannot clean the sensor if Battery Grip BG-E3 (optional) is attached
to the camera and size-AA batteries supply the power. Use AC Adapter
Kit ACK-DC20 (optional) or use a battery having sufficient power.
40
3
Set the power-off time/Auto power off
You can set the auto power-off time for the camera to turn off
automatically after a set time of idle operation. If you do not want the
camera to turn off automatically, set this to [Off]. If the camera turns off
automatically, just press the shutter button halfway to turn it on again.
Select [Auto power off].
1
¡ Select the [c] tab.
¡ Press the <V> key to select [Auto
power off], then press <0>.
Set the desired time.
2
¡ Press the <V> key to select the
desired time, then press <0>.
3 CF Card Reminder
This prevents shooting if there is no CF card in the camera.This can be
set in all shooting modes.
Select [Shoot w/o card].
1
¡ Select the [c] tab.
¡ Press the <V> key to select [Shoot
w/o card], then press <0>.
Select [Off].
¡ Press the <V> key to select [Off],
2
then press <0>.
If [Off] has been set and you press the shutter button while there is no CF
card in the camera, “no CF” will be displayed in the viewfinder.
41
Dioptric Adjustment
You can adjust the sharpness of the viewfinder image. By adjusting the
diopter to suit your eyesight, you can see a sharp viewfinder image
even without eyeglasses. The camera’s adjustable dioptric range is -3
dpt to +1 dpt.
Turn the dioptric adjustment
knob.
¡ Turn the knob left or right until the AF
points in the viewfinder look sharp.
¡ The illustration shows the knob at the
standard setting (-1 dpt).
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens E (10 types, optional) is recommended.
Holding the Camera
To obtain sharp images, hold the camera still to minimize camera
shake.
Horizontal shooting
Vertical shooting
¡ Firmly grasp the camera grip with your right hand, and press your
both elbows lightly against your body.
¡ Hold the lens bottom with your left hand.
¡ Press the camera against your face and look through the viewfinder.
¡ To maintain a stable stance, place one foot in front of the other
instead of lining up both feet.
42
2
Fully Automatic
Shooting
This chapter explains how to use the Basic Zone modes on
the Mode Dial for quick and easy shooting. In each mode
<1
> <2
> <3
> <4
> <5
> <6
> <7
>, the AF mode,
metering mode, ISO speed, etc., are set automatically to suit
the subject. In these modes, all you do is point and shoot. In
addition, to help prevent mistakes caused by operating the
camera improperly, shooting-related buttons like <
Z>
<
B
> < > < > < > < > < > are disabled in these
Q
E
S
A
O
modes. So you need not worry about accidental errors.
Set the Mode Dial to one of
the following modes: <1>
<2> <3> <4> <5> <6>
<7>
¡ The shooting procedure is the
same as for “1 Using Full
Auto” (p.44).
¡
To see what is set automatically
in the Basic Zone modes, see
“Function Availability Table”
(p.152).
43
1 Using Full Auto
All you do is point the camera and press the shutter button. Everything
is automatic so it is easy to photograph any subject. With seven AF
points to focus the subject, anyone can easily take nice pictures.
Set the Mode Dial to <1>.
1
s The AF mode will be set to
<9>, the drive mode will be
set to <u>, and the metering mode
will be set to <q> automatically.
AF point
Aim any AF point over the
2 subject.
¡ Out of the seven AF points, the one
covering the closest subject is
selected automatically to achieve
focus.
Focus the subject.
3
¡
Press the shutter button halfway to focus.
.
s
The dot < > inside the AF point achieving
focus flashes briefly in red. At the same
time, the beeper will sound and the focus
confirmation light <o> will light.
s The shutter speed and aperture value
will be set automatically and
displayed in the viewfinder and on the
LCD panel. (0)
s If necessary, the built-in flash will pop-
up automatically.
Focus confirmation light
Shutter speed
Aperture
s
Under low-light conditions, if the focus
cannot be achieved with the AF, AF-
assist beam is fired automatically. (p.74)
Check the display.
4
44
1 Using Full Auto
Take the picture.
¡ Compose the shot and press the
shutter button completely.
5
s The captured image will be displayed
for about 2 sec. on the LCD monitor.
¡ To view the images recorded on the
CF card, press the <x> button.
(p.107)
¡ While focusing with <AF>, do not touch the focusing ring at the front of
the lens.
¡ If you want to zoom, do it before focusing. Turning the zoom ring after
achieving focus may throw off the focus.
¡ When the CF card becomes full, the CF Full warning “FuLL CF” will
appear in the viewfinder and on the LCD panel and shooting will be
disabled. Replace the CF card with one that is not full.
¡ If something obstructs the built-in flash from popping up, “Err 05” will
blink on the LCD panel. If this happens, set the power switch to <2>
and <1> again.
¡ Using a non-Canon lens with an EOS camera may not result in proper
camera or lens operation.
¡ When focus is achieved, the focus and exposure setting will also be
locked.
¡ If the focus confirmation light <o> blinks, the picture cannot be taken.
(p.76)
.
¡ The dot < > in multiple AF points may flash in red at the same time.This
indicates that focus has been achieved at all those AF points.
¡ In the Basic Zone modes (except <3> <5> <7>), the built-in flash
will pop up and fire automatically in low-light or backlit conditions. To
retract the flash, push it back down.
¡ You can disable the beeper from sounding when focus is achieved. Set
the [z Beep] menu item. (p.50)
¡ The image review time after image capture can be changed with the
menu’s [x Review time] setting. (p.104)
¡ If you want to freely select the AF point for focusing, set the Mode Dial to
<d>, then follow “Selecting the AF Point” (p.73) to select the AF point.
45
Basic Zone Modes
Just select a shooting mode suiting the target subject, and you can
easily obtain the best results.
Portrait
2
This mode blurs the background to make the
human subject stand out.
¡ Holding down the shutter button executes
continuous shooting.
¡ To increase the background blur, use a telephoto
lens and fill the frame with the subject from the
waist up. Or have the subject stand farther away
from the background.
s The AF mode will be set to <X>, the
drive mode will be set to <i>, and the metering
mode will be set to <q> automatically.
Landscape
3
4
This is for wide scenic views, night scenes,
etc.
¡ Using a wide-angle lens will further enhance the
depth and breadth of the image.
s The AF mode will be set to <X>, the
drive mode will be set to <u>, and the metering
mode will be set to <q> automatically.
Close-up
Use this mode to take close-up shots of
flowers, insects, etc.
¡ Focus the subject at the lens’ closest focusing
distance as much as possible.
¡ To obtain a larger magnification, use the
telephoto end of a zoom lens.
¡ For better close-ups, an EOS-dedicated macro
lens and Macro Ring Lite (both optional) are
recommended.
s The AF mode will be set to <X>, the
drive mode will be set to <u>, and the metering
mode will be set to <q> automatically.
46
Basic Zone Modes
Sports
5
This is for fast-moving subjects when you
want to freeze the action.
¡
The camera will first track the subject with the center
AF point. Focus tracking will then continue with any
of the seven AF points covering the subject.
¡ While you press the shutter button, focusing will
continue for continuous shooting.
¡ Using a telephoto lens is recommended.
¡
When focus is achieved, the beeper will sound softly.
s The AF mode will be set to <Z>, the drive
mode will be set to <i>, and the metering mode
will be set to <q> automatically.
Night Portrait
6
This mode is for shooting people outside at
twilight or at night. The flash illuminates the
subject and a slow sync speed captures a
natural-looking exposure of the background.
¡ If you want to shoot a night scene without people,
use the <3> mode instead.
¡
Tell the subject to keep still even after the flash fires.
s The AF mode will be set to <X>, the
drive mode will be set to <u>, and the metering
mode will be set to <q> automatically.
Flash off
7
You can disable the flash when you do not
want it to fire.
¡ The built-in flash or any external Speedlite will
not fire.
s The AF mode will be set to <9>, the drive
mode will be set to <u>, and the metering
mode will be set to <q> automatically.
In the <6> mode, use a tripod to prevent camera shake. In the <3> or <7>
mode, if the shutter speed display blinks, be aware that camera shake may occur.
47
j Self-timer Operation
Use the self-timer when you want to be in the picture.You can use self-
timer in any Basic Zone mode or Creative Zone mode.
Select <Q>.
¡ Look at the LCD panel and press the
1
<iQ> button to select <Q>.
Focus the subject.
2
¡
Look in the viewfinder and press the
shutter button halfway to check that the
focus confirmation light <o> is on and
the exposure setting is displayed.
Take the picture.
3
¡ Look through the viewfinder and
press the shutter button completely.
s The beeper will sound, the self-timer
lamp will start blinking, and the shot
will be taken about 10 sec. later.
During the first 8 sec., the beeper
beeps slowly and the lamp blinks slowly.
Then during the final 2 sec., the beeper
beeps faster and the lamp stays lit.
s During the self-timer operation, the
LCD panel counts down the seconds
until the picture is taken.
Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.
¡ Use a tripod when you use the self-timer.
¡ To cancel the self-timer after it starts, press the <iQ> button.
¡ When using the self-timer to shoot only yourself, use focus lock (p.75) for
an object at about the same distance as where you will be.
¡ You can also silence the beeper. (p.50)
48
R Wireless Remote Control
With Remote Controller RC-1 or RC-5 (optional), you can shoot
remotely up to about 5 meters/16.4 ft. directly in front of the camera.
Select <Q>.
¡ Look at the LCD panel and press the
1
<iQ> button to select <Q>.
Take the picture.
¡ Point the remote controller toward the
2
camera’s remote control sensor and
press the transmit button.
s The camera will autofocus.
s When focus is achieved, the self-
timer lamp will light and the picture
will be taken.
Remote control sensor
Camera misoperation may occur near certain types of fluorescent light.
During wireless remote control, try to keep the camera away from
fluorescent light.
49
Using the Eyepiece Cover
During self-timer or remote control operation when your eye does not
cover the viewfinder eyepiece, stray light may enter the eyepiece and
throw off the exposure. To prevent this, use the eyepiece cover
(attached to the neck strap) to cover the eyepiece.
Remove the eyecup.
¡ From the bottom of the eyecup, push
1
it upward to remove.
Attaching the Eyepiece Cover
2
¡ Slide the eyepiece cover down into
the eyepiece groove to attach it.
3
Silencing the Beeper
You can disable the beeper so it does not sound in any shooting mode.
Select [Beep].
1
¡ Select the [z] tab.
¡ Press the <V> key to select
[Beep], then press <0>.
Select [Off].
¡ Press the <V> key to select [Off],
2
then press <0>.
50
3
Image Settings
This chapter explains the digital image settings for the
image-recording quality, ISO speed, white balance,
color space, and processing parameters.
¡ For Basic Zone modes, only the image-recording quality
(except RAW and RAW+7L), file numbering, and camera
setting check will apply in this chapter.
¡ The asterisk M on the right of the page title indicates that
the respective feature is available only in Creative Zone
8
modes (d, s, f, a,
).
51
3 Setting the Image-recording Quality
The 73/83/74/84/76/86 modes record the image in the
widely-used JPEG. In the 1 mode, the captured image will require
post-processing with the software provided. In the 1+73
(RAW+JPEG) mode, the image is recorded in both the RAW and JPEG
simultaneously. Note that 1 and 1+73 cannot be selected
in the Basic Zone modes.
Select [Quality].
1
¡ Select the [z] tab.
¡ Press the <V> key to select
[Quality], then press <0>.
s
The recording quality screen will appear.
Set the desired recording quality.
2
¡
Press the <S
> key to select the desired
>.
recording quality, then press <
0
¡ When you press the shutter button
halfway, the image-recording quality
will be displayed on the LCD panel.
Image-recording Quality Settings
Image Type
(extension)
Image-recording
Quality
Pixels
Print Size
A3 or larger
A5 - A4
73 (Large Fine)
3456 x 2304
(Approx. 8 million)
83 (Large Normal)
74 (Medium Fine)
84 (Medium Normal)
76 (Small Fine)
JPEG
(.JPG)
2496 x 1664
(Approx. 4.15 million)
1728 x 1152
(Approx. 2 million)
A5 or smaller
A3 or larger
86 (Small Normal)
RAW
(.CR2)
3456 x 2304
(Approx. 8 million)
1 (RAW)
¡ The 7 (Fine) and 8 (Normal) icons indicate the image’s compression
rate. For better image quality, select 7 for low compression. To record
more images on the memory card, select a higher compression 8.
¡ With RAW+7L, the RAW and JPEG images will be saved under the
same file No. in the same folder.
52
3 Setting the Image-recording Quality
Image File Size and CF Card Capacity According to
Image-Recording Quality
Image-
recording
Quality
Image File Size
(Approx. MB)
Possible Shots
73
3.3
1.7
2.0
1.0
1.2
0.6
-
145
279
245
466
419
790
41
83
74
84
76
86
1+73
1
8.3
58
¡ The number of possible shots and maximum burst (p.54) apply to a Canon
512MB CF card.
¡ The single image size, number of possible shots, and maximum burst during
continuous shooting are based on Canon’s testing standards (ISO 100 with
[Parameter 1] set). The actual single image size, number of possible shots,
and maximum burst will vary depending on the subject, shooting mode, ISO
speed, parameters, etc.
¡ In the case of monochrome images (p.65), the file size will be smaller so the
number of possible shots will be higher.
¡ On the top LCD panel, you can check the remaining number of images the CF
card can record.
¡ A different image-recording quality can be set separately for the Basic Zone
modes and Creative Zone modes.
About the RAW
The RAW assumes that the image will undergo post-processing with a
personal computer. Special knowledge is required, but you can use the
bundled software to obtain the optimum effect.
Image processing refers to adjusting the RAW image’s white balance,
contrast, etc., to create the desired image.
Note that RAW images will not work with direct printing or DPOF.
53
3 Setting the Image-recording Quality
Max. Burst During Continuous Shooting
The maximum burst during continuous shooting depends on the image-
recording quality. The approx. maximum burst during continuous
shooting is indicated below for each image-recording quality.
Note that with high-speed CF cards, the maximum burst may be higher
than shown in the table below depending on the shooting conditions.
Image-
recording
Quality
73 83 74 84 76 86
14 36 27 110 80 780
1
1+73
Max. Burst
5
4
¡ The number of shots remaining during
the maximum burst is displayed on the
lower right of the viewfinder.
Max. Burst
¡ If “9” is displayed, it indicates that the maximum burst is nine or more
shots. If “5” is displayed, it is five shots.
¡ While you are shooting and the remaining maximum burst is fewer
than 9, the viewfinder will display “8”, “7”, etc. If you stop the
continuous shooting, the maximum burst will increase.
The above table’s figures for the maximum burst apply when all the captured
images have been processed internally and written to the CF card.
¡ With white balance bracketing (p.60), the maximum burst will be 2 shots.
¡ The maximum burst is displayed even when the drive mode is set to
<u> (Single) or <j>.The maximum burst is displayed even when a CF
card is not in the camera. Therefore, before shooting, make sure that a
CF card is installed in the camera.
54
Z Setting the ISO SpeedN
The ISO speed is a numeric indication of the sensitivity to light. A higher
ISO speed number indicates a higher sensitivity to light. Therefore, a
high ISO speed is suited for low light and moving subjects. However, the
image may look more grainy with noise, etc. On the other hand, a low
ISO speed is not suited for low light or action shots, but the image will
look finer. The camera can be set between ISO 100 and 1600 in 1-stop
increments.
ISO Speed in the Basic Zone Modes
The ISO speed is set automatically within ISO 100-400.
ISO Speed in the Creative Zone Modes
You can set the ISO speed to [100] [200] [400] [800] [1600].
W
Press the < Z> button.
1
s The [ISO speed] menu will be
displayed.
Set the ISO speed.
¡ Press the <V> key to select the
2
desired setting, then press <0>.
¡ At higher ISO speeds and higher ambient temperatures, the image will
look more grainy.
¡ High temperatures, high ISO speeds, or long exposures may cause
irregular colors in the image.
55
BSetting the White BalanceN
Normally, the <Q> setting will set the optimum white balance
automatically. If natural-looking colors cannot be obtained with <Q>,
you can set the white balance manually to suit the respective light
source. In the Basic Zone modes, <Q> will be set automatically.
X
Press the < B> button.
1
s The [White balance] menu will
appear.
Select the white balance setting.
¡ Press the <S> key to select the
2
desired setting, then press <0>.
¡ When you press the shutter button
halfway, the white balance setting will
be displayed on the LCD panel.
Display
Q
W
Mode
Color temperature (Approx. K)
Auto
3000 - 7000
5200
Daylight
Shade
E
R
Y
7000
Cloudy, twilight, sunset
Tungsten
6000
3200
U
White fluorescent light
Flash
4000
I
6000
O
Custom*
2000 - 10000
* Set the optimum white balance manually to suit the lighting. (p.57)
About White Balance
The three RGB (red, green, and blue) primary colors exist in the light source in
varying proportions depending on the color temperature. When the color
temperature is high, there is more blue. And when the color temperature is low,
there is more red. To the human eye, a white object looks white regardless of
the type of lighting. With a digital camera, the color temperature can be
adjusted with software so that the colors in the image look more natural. The
subject’s white color is used as the criteria for adjusting the other colors. The
camera’s <
Q> setting uses the image sensor for auto white balance.
56
3Custom White BalanceN
With custom white balance, you shoot a white object that will serve as
the basis for the white balance setting. By selecting this image, you
import its white balance data for the white balance setting.
Photograph a white object.
1
¡ The plain, white object should fill the
viewfinder center.
¡ Set the lens focus mode switch to
<MF>, then focus manually. (p.76)
¡ Set any white balance setting (p.56).
¡ Shoot the white object so that a
standard exposure is obtained.
Select [Custom WB].
2
¡ Select the [m] tab.
¡ Press the <V> key to select
[Custom WB], then press <0>.
s The custom WB screen will appear.
Select the image.
¡ Press the <U> key to select the
3
image that was taken in step 1, then
press <0>.
s The image’s white balance data will
be imported and the menu will
reappear.
s The caution screen highlighted in
orange frame will appear.
Select [White balance].
4
¡ Select the [m] tab.
¡ Press the <V> key to select [White
balance], then press <0>.
s The white balance screen will appear.
57
3 Custom White BalanceN
Select the custom white balance.
¡ Press the <S> key to select <O>,
5
then press <0>.
¡ When you press the shutter button
halfway, the <O> icon will be
displayed on the LCD panel.
¡ If the exposure obtained in step 1 is underexposed or overexposed, a
correct white balance might not be obtained.
¡ If an image was captured while the processing parameter was set to [B/
W] (p.65), it cannot be selected in step 3.
Instead of a white object, an 18% gray card (commercially available) can
produce a more accurate white balance.
58
3White Balance CorrectionN
You can correct the standard color temperature for the white balance
setting. This adjustment will have the same effect as using a color
temperature conversion or color compensating filter. Each color can be
corrected to one of nine levels. Users familiar with using color
temperature conversion or color compensating filters will find this
feature handy.
Select [WB SHIFT/BKT].
1
¡ Select the [m] tab.
¡ Press the <V> key to select [WB
SHIFT/BKT], then press <0>.
s The WB correction/WB bracketing
screen will appear.
Set the white balance correction.
2
¡ Press the <S> key to move the “ ”
mark to the desired position.
¡ B is blue, A is amber, M is magenta,
and G is green. The color in the
respective direction will be corrected.
¡ On the upper right, the “SHIFT”
Sample setting: A2, G1
indicator shows the bias direction and
correction amount.
¡ To cancel the white balance
correction, press the <S> key to
move the “ ” to the center so that
“SHIFT” indicates “0, 0.”
¡ Press <0> to exit the setting and
return to the menu.
¡ One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: A measurement unit indicating the
density of a color temperature conversion filter.)
¡ You can also set white balance bracketing and AEB in combination with
white balance correction.
¡ In step 2, if you turn the <6> dial, WB bracketing will be set. (p.60)
59
3 White Balance Auto BracketingN
With just one shot, three images having a different color hue can be recorded
simultaneously. Based on the white balance mode’s color temperature, the image
will be bracketed with a blue/amber bias or magenta/green bias. This is called
white balance bracketing. It can be set up to 3 levels in single-level increments.
Set the image-recording quality to
a setting other than RAW and
RAW+7L. (p.52)
1
Select [WB SHIFT/BKT].
2
¡ Select the [m] tab.
¡ Press the <V> key to select [WB
SHIFT/BKT], then press <0>.
s The WB correction/WB bracketing
screen will appear.
Set the bracketing amount.
3
¡
Turn the <
6> dial to set the bracketing
direction and bracketing level.
¡ When you turn the <6> dial, the “ ”
mark on the screen will change to
“
” (3 points). Turning the <6>
B/A bias 3 levels
dial to the right sets the B/A
bracketing, and turning it to the left
sets the M/G bracketing.
¡ Set the bracketing level for the B/A or
M/G bias up to 3 levels in single-
level increments. (The bracketing
level cannot be set for both the B/A
and M/G bias at the same time.)
s On the right side of the screen, “BKT”
indicates the bracketing direction and
bracketing level.
M/G bias 3 levels
¡ Press <0> to exit the setting and
return to the menu.
60
3 White Balance Auto BracketingN
Take the picture.
4
s If B/A bracketing has been set, the
three images will be recorded onto
the CF card in the following
sequence: Normal white balance,
blue bias, and amber bias. If M/G
bracketing has been set, the
sequence will be normal white
balance, magenta bias, and green
bias.
Canceling White Balance Auto Bracketing
¡ In step 3, set “BKT” to “ 0” (set “
”
to “ ”, 1 point).
¡ If the image-recording quality is set to RAW or RAW+7L, white balance
bracketing cannot be used.
¡ With white balance bracketing set, the maximum burst will be 2 shots.
¡ When you set white balance bracketing, the possible number of shots
displayed on the LCD panel will decrease to one-third the normal
number.
¡ Since three images are recorded for one shot, the CF card will take
longer to record the shot.
¡ You can also set white balance correction and AEB in combination with
white balance bracketing. If you set AEB in combination with white
balance bracketing, a total of nine images will be recorded for a single
shot.
¡ “BKT” stands for bracketing.
61
3Setting the Color SpaceN
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal images, sRGB is recommended. In the Basic
Zone modes, sRGB will be set automatically.
Select [Color space].
1
¡ Select the [m] tab.
¡ Press the <V> key to select [Color
space], then press <0>.
Set the desired color space.
2
¡ Press the <V> key to select
[sRGB] or [Adobe RGB], then press
<0>.
About Adobe RGB
This is mainly used for commercial printing and other industrial
uses.This setting is not recommended if you do not know about image
processing, Adobe RGB, and Design rule for Camera File System 2.0
(Exif 2.21).
Since the image will look very subdued in an sRGB personal computer
environment and with printers not compatible with Design rule for
Camera File System 2.0 (Exif 2.21), post-processing of the image with
software will be required.
¡ If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
¡
The ICC profile is not appended. The ICC profile is explained in the
Software Instruction Manual (PDF).
62
3
Selecting the Processing ParametersN
The image you capture can be processed internally by the camera to
look more vivid and sharp or more subdued. The processing
parameters can be set according to the preset Parameter 1 or
Parameter 2 or to Set 1, 2, or 3 that you can set yourself.There is also a
B/W parameter for black-and-white photos. In the Basic Zone modes,
Parameter 1 will be set automatically.
Select [Parameters].
1
¡ Select the [m] tab.
¡ Press the <V> key to select
[Parameters], then press <0>.
s Processing parameter setting screen
will appear.
Press <0>.
2
Select the desired parameter.
3
¡ Press the <V> key to select the
desired setting, then press <0>.
¡ Press the <M> button to return to
the menu.
About Processing Parameters
Parameter
Description
The image will look vivid and sharp. In the Basic Zone
modes, all images will be processed in this way.
Parameter 1
The colors will be more subdued than Parameter 1, making
the colors look more natural.
Parameter 2
You can set and register the following settings: [Contrast],
[Sharpness], [Saturation], and [Color tone]. (p.64)
Set 1, 2, 3
B/W
You can capture black-and-white images.
¡
With Parameter 1, the [Contrast], [Sharpness], and [Saturation] are set to
the +1 level. With Parameter 2, all the parameters are set to neutral at 0.
¡ In Creative Zone modes, [Parameter 1] is set by default.
63
3
Setting the Processing ParametersN
The image you capture can be processed automatically by the camera in accordance with
the parameter settings you set (five levels each for [Contrast], [Sharpness], [Saturation],
and [Color tone]).You can register and save up to three sets of processing parameters.
Select [Parameters].
1
¡ Select the [m] tab.
¡ Press the <V> key to select
[Parameters], then press <0>.
s The parameter setting screen will
appear.
Press <0>.
2
Select the set number.
3
¡ Press the <V> key to select [Set 1],
[Set 2], or [Set 3] then press <0>.
¡ The default parameter settings for
[Set 1], [Set 2], and [Set 3] are all “0”
(Standard).
Select the item to be set.
4
¡ Press the <V> key to select the
desired setting, then press <0>.
Parameter
Minus
Plus
Contrast
Low contrast
High contrast
Sharpness Less sharp outline Sharper outline
Saturation Low saturation High saturation
Color tone Reddish skin tone Yellowish skin tone
Set the desired setting.
¡ Press the <U> key to select the
5
desired effect, then press <0>.
¡ Press the <M> button to return to
the menu.
64
3 Setting the Processing ParametersN
Black-and-White Shooting
When you capture images with the processing parameter set to B/W, the camera
will process and record the images as black-and-white images onto the CF card.
Select [B/W].
¡ In step 3 on page 64, select [B/W],
1
then press <0>.
Select the item to be set.
2
¡ Press the <V> key to select the
desired setting, then press <0>.
¡
The [Contrast] and [Sharpness] will be the
same as in the table in step 4 on page 64.
¡ For details on [Filter effect] and
[Toning effect], see page 66.
Set the desired setting.
3
¡
Press the <
S
> key to select the desired
>.
effect, then press <
0
¡ Press the <M> button to return to
the menu.
¡ When you press the shutter button
halfway, the <0> icon will be
displayed on the LCD panel.
¡ To obtain natural-looking, black-and-white images, set a suitable white
balance.
¡ JPEG images captured with the parameter set to [B/W] cannot be
converted to color. Not even with any personal computer software.
If the image-recording quality is RAW and the parameter is [B/W], the image
can be converted to color with the bundled software.
65
3 Setting the Processing ParametersN
Filter Effects
The same effect as using filters with black-and-white film can be
obtained with digital images. A color can be brightened by using a filter
having a similar or same color. At the same time, the complementary
colors will be darkened.
Filter
N: None
Effect
Normal black-and-white image
with no filter effects.
The blue sky will look more
natural, and the white clouds
will look more crisp.
Ye:Yellow
Or: Orange
R: Red
The blue sky will look slightly
darker. The sunset will look
more brilliant.
The blue sky will look quite
dark. Fall leaves will look
crisper and brighter.
Skin tones and lips will look
fine. Tree leaves will look
crisper and brighter.
G: Green
v
Setting the [Contrast] to the plus side will make the filter effect more
pronounced.
Toning Effect
When color toning is set, the selected color toning will be applied to the
black-and-white image before being recorded to the CF card. It can
make the image look more impressive.
Select one of the following: [N:None]
[S:Sepia] [B:Blue] [P:Purple] [G:Green]
66
3File Numbering Methods
The file number is like the frame number on film. There are two file
numbering methods: [Continuous] and [Auto reset]. The images you
take are automatically assigned a file number from 0001 to 9999 and
saved in a folder (created automatically) that can hold up to 100 images.
Select [File numbering].
1
¡ Select the [c] tab.
¡ Press the <V> key to select [File
numbering], then press <0>.
Select the file numbering method.
¡ Press the <V> key to select
2
[Continuous] or [Auto reset], then
press <0>.
Continuous
The file numbering continues in sequence
even after you replace the CF card. This
prevents images from having the same file
number, so image management with a
personal computer is easier. Note that if the
replacement CF card already contains
images captured with the camera, the file
File numbering after
changing the CF card
CF card -1
CF card -2
XXX-0051
XXX-0052
Next sequential file number
numbering will start after the highest file number in that CF card or after
the last captured image’s file number, whichever is higher.
Auto reset
Each time you replace the CF card, the file
numbering will be reset to the first file number
(100-0001). Since the file number starts from
0001 in each CF card, you can organize
images according to CF card. Note that if the
replacement CF card already contains
images, the file numbering will start after the
highest file number in that CF card.
File numbering after
changing the CF card
CF card -1
CF card -2
XXX-0051
100-0001
File number is reset
67
When folder No. 999 is created, [Folder number full] will appear on the
LCD monitor. If file No. 9999 is created, “Err CF” will be displayed on the
LCD panel and in the viewfinder. Replace the CF card with a new one.
For both JPEG and RAW images, the file name will start with “IMG_”. The
extension will be “.JPG” for JPEG images and “.CR2” for RAW images.
B Checking Camera Settings
When the camera is ready to shoot, press the <B> button to view
the current camera settings on the LCD monitor.
Display the camera settings.
¡ Press the <B> button.
s The current camera settings will
appear on the LCD monitor.
¡ To turn off the settings display, press
the <B> button again.
Date/Time (p.37)
AEB setting (p.90)
WB correction (p.59)/
WB bracketing (p.60)
Color space (p.62)
Processing parameters (p.63)
Image review time (p.104)
Auto rotate display (p.105)
ISO speed (p.55)
Auto power off (p.41)
CF card remaining capacity
Flash exposure compensation (p.100)
For details on the image info during playback, see “Shooting Information
Display” (p.108).
68
4
Setting the AF, Metering,
and Drive Modes
The viewfinder has seven AF points. By
selecting a suitable AF point, you can
shoot with autofocus while framing the
subject as desired.You can also set the
AF mode to suit the subject or obtain
the desired effect.
Drive mode
Evaluative, partial, and center-
Metering mode
weighted average metering modes
are provided. Single, continuous,
and self-timer drive modes are
provided. Select the metering
mode that suits the subject or your
photographic intention.
AF mode
¡ The asterisk M on the right of the page title indicates that
the respective feature is available only in Creative Zone
8
modes (d, s, f, a,
).
¡ In the Basic Zone modes, the AF mode, AF point, metering
mode, and drive mode are set automatically.
69
f Selecting the AF ModeN
The AF mode is the autofocusing operation method. Three AF modes
are provided. One-Shot AF is suited for still subjects, while AI Servo AF
is for moving subjects. And AI Focus AF switches from One-Shot AF to
AI Servo AF automatically if the still subject starts moving. In the Basic
Zone modes, the optimum AF mode is set automatically.
Set the lens focus mode switch to
<AF>. (p.25)
1
2
Z
Press the < E> button.
s The [AF mode] menu will appear.
Select the AF mode.
3
¡ Press the <V> key to select the
desired setting, then press <0>.
X: One-Shot AF
9 : AI Focus AF
Z : AI Servo AF
¡ When you press the shutter button
halfway, the LCD panel will display an
arrow <D> next to the current AF
mode.
¡ Although you can still set the AF mode while the lens focus mode switch
is set to <MF>, the AF mode will not take effect during manual focus.
¡ If an Extender (optional) is attached and the maximum aperture of the
lens is f/5.6 or smaller, AF will not be possible. For details, see the
Extender’s instructions.
<AF> stands for Auto Focus, and <MF> is Manual Focus.
70
f Selecting the AF ModeN
One-Shot AF for Still Subjects
Pressing the shutter button
halfway activates the autofocus
and achieves focus once.
.
s The dot < > inside the AF point
achieving focus flashes briefly in red.
Also, the focus confirmation light
<o> in the viewfinder lights.
With evaluative metering, the exposure setting
(shutter speed and aperture) will also be set
when focus is achieved. The exposure setting
and focus will be locked as long as the shutter
button is pressed halfway. (p.75) You can then
recompose the shot while retaining the
AF point
Focus
confirmation
light
s
exposure setting and point of focus.
If focus cannot be achieved, the focus confirmation light <
o> in the viewfinder will blink. If this
occurs, a picture cannot be taken even if the shutter button is pressed fully. Recompose the
picture and try and focus again. Or see “When Autofocus Fails (Manual Focusing)” (p.76).
AI Servo AF for Moving Subjects
While you press the shutter
button halfway, the camera
focuses continuously.
¡
This AF mode is for moving subjects when
the focusing distance keeps changing.
With predictive AF*, the camera can also
focus track a subject which steadily
s
approaches or retreats from the camera.
s The exposure is set at the moment
the picture is taken.
In a Creative Zone mode (except <
8>), the beeper will not sound even when
focus is achieved. Also, the focus confirmation light <
o> in the viewfinder will not light.
71
f Selecting the AF ModeN
* About Predictive AF
If the subject approaches or retreats from the camera at a constant rate,
the camera tracks the subject and predicts the focusing distance
immediately before the picture is taken. This is for obtaining correct
focus at the moment of exposure.
¡ When the AF point selection is automatic, the camera first uses the
center AF point to focus. During autofocusing, if the subject moves
away from the center AF point, focus tracking continues as long as
the subject is covered by another AF point.
¡ With a manually selected AF point, the selected AF point will focus
track the subject.
AI Focus AF for Automatic Switching of AF Mode
AI Focus AF switches the AF mode from
One-Shot AF to AI Servo AF
automatically if the still subject starts
moving.
After the subject is focused in the One-
Shot AF mode, if the subject starts
moving, the camera will detect the
movement and change the AF mode
automatically to AI Servo AF.
When focus is achieved in the AI Focus AF mode with the Servo mode
active, the beeper will sound softly. The focus confirmation light <o> in the
viewfinder will not light.
72
S Selecting the AF PointN
The AF point is used for focusing. The AF point can be selected
automatically by the camera or manually by you.
8
In Basic Zone modes and the <
> mode, the AF point is selected
automatically. In the <d> <s> <f> <a> modes, you can switch
between automatic and manual AF point selection.
Automatic AF Point Selection
The camera selects the AF point automatically to suit the shooting
.
conditions. All the AF points < > in the viewfinder will light in red.
Manual AF Point Selection
You can select any of the seven AF points manually. This is best
when you want to focus a particular subject, or autofocus quickly while
composing the shot.
<S> Selecting with the Cross Keys
Press the <S> button. (9)
1
s
The selected AF point will be
displayed in the viewfinder and on the
LCD panel.
Select the AF point.
¡ Press the <S> key while looking in
2
the viewfinder or at the LCD panel.
s
Press the <U> key to select a
horizontal AF point, or press the <
V
>
key to select a vertical AF point.
Automatic AF point selection
¡ By pressing <0>, you can toggle
between the center AF point and
automatic AF point selection.
¡ To return to shooting, press the
shutter button halfway or press the
<S> button again.
Automatic AF point selection
73
S Selecting the AF PointN
• Automatic AF point selection
.
All of the AF points < > will light in red.
¡ Selecting an AF point beyond a peripheral AF
point will set the automatic selection mode.
• Manual AF point selection
.
Select the desired AF point so the < >
lights in red.
Selecting with the Dial
¡ Press the <S> button, then turn the
<6> dial.
¡
When you turn the dial, the selection will go
in the looping sequence shown on the left.
¡ When looking at the LCD panel to select the AF point, note the following:
Automatic selection , center
right , top
,
¡ If focus cannot be achieved with an EOS-dedicated, external Speedlite’s
AF-assist beam, select the center AF point.
About AF-Assist beam with the Built-in Flash
Under low-light conditions, when you press the shutter button halfway,
the built-in flash fires a brief burst of flashes. It illuminates the subject to
enable easier autofocusing.
¡ In the <3> <5> <7> modes, the AF-assist beam does not light.
¡
The built-in flash’s AF-assist beam is effective up to about 4 meters/13.2 feet.
¡ In the Creative Zone modes when you pop-up the built-in flash with the
<I> button, the AF-assist beam will be fired when necessary.
74
Using Focus Lock
After achieving focus, you can lock the focus on a subject and
recompose the shot.This is called “focus lock.” Focus lock works only in
the One-Shot AF mode.
Set the Mode Dial to a Creative
Zone mode.
1
2
3
Select the desired AF point. (p.73)
Focus the subject.
¡ Move the AF point over the subject
and press the shutter button halfway.
Keep pressing the shutter button
4 halfway and recompose the
picture as desired.
Take the picture.
5
If the AF mode is AI Servo AF (or AI Focus AF set to Servo mode), focus
lock will not work.
5
Focus lock is also possible in Basic Zone modes (except < >). In this
case, start from step 3.
75
When Autofocus Fails (Manual Focusing)
Autofocus can fail to achieve focus (the focus confirmation light <o>
blinks) with certain subjects such as the following:
Subjects Difficult to Focus
(a) Low-contrast subjects
Example: Blue sky, solid-color walls, etc.
(b) Subjects in low light
(c) Extremely backlit and reflective subjects
Example: Car with a reflective body, etc.
(d) Overlapping near and far objects
Example: Animal in a cage, etc.
(e) Repetitive patterns
Example: Skyscraper windows, computer keyboards, etc.
In such cases, do one of the following:
(1) Focus an object at the same distance as the subject and lock the
focus before recomposing. (p.75)
(2) Set the lens focus mode switch to <MF> and focus manually.
Manual Focusing
Set the lens focus mode switch to
<MF>.
1
2
Focus the subject.
¡ Focus by turning the lens focusing
ring until the subject is in focus in the
Focusing ring
viewfinder.
If you press the shutter button halfway during manual focusing, the AF
point(s) achieving focus and the focus confirmation light <o> in the
viewfinder will light when focus is achieved.
76
q Selecting the Metering ModeN
The camera has three metering modes: Evaluative, partial, and center-weighted average
metering. In the Basic Zone modes, evaluative metering will be set automatically.
Y
Press the < Q> button.
s
1
2
The [Metering mode] menu will appear.
Select the metering mode.
¡ Press the <V> key to select the
desired setting, then press <0>.
q: Evaluative Metering
w: Partial Metering
e: Center-weighted Averaged Metering
¡ When you press the shutter button
halfway, the selected metering mode
will be displayed on the LCD panel.
q Evaluative Metering
This is the camera’s standard metering mode suited for most
subjects even under backlit conditions. After detecting the
main subject’s position, brightness, background, front and
back lighting, etc., the camera sets the proper exposure.
¡ During manual focusing, evaluative metering is based
on the center AF point.
¡ If the subject brightness and background light level are
very different (there is a strong backlight or spotlight),
use partial metering <w> instead.
w Partial Metering
Effective when the background is much brighter than the
subject due to backlighting, etc. Partial metering covers
about 9% of the viewfinder area at the center. The area
covered by partial metering is shown on the left.
e Center-weighted Average Metering
The metering is weighted at the center and then averaged
for the entire scene.
77
i Selecting the Drive Mode
Single and continuous drive modes are provided. In the Basic Zone
modes, the optimum drive mode is set automatically.
Press the <iQ> button.
¡ Look at the LCD panel and press the
<iQ> button to select the drive
mode.
u : Single shooting
When you press the shutter
button completely, one shot will
be taken.
i : Continuous shooting
(Max. 3 shots per sec.)
While you press the shutter
button completely, shots will be
taken continuously.
Q : Self-timer/Remote control
(p.48/49)
¡ During continuous shooting, the captured
images are first stored in the camera’s
buffer memory and then successively
Max. Burst
transferred to the CF card. When the
buffer memory becomes full during continuous shooting, “buSY” will be
displayed on the LCD panel and in the viewfinder and the camera cannot
take any more shots. As the captured images are transferred to the CF
card, you will be able to capture more images. Press the shutter button
halfway to check in the viewfinder’s bottom right the current remaining
shots of the maximum burst.
¡ If “FuLL CF” is displayed in the viewfinder and on the LCD panel, wait
until the access lamp stops blinking, then replace the CF card.
¡ When the battery level is low, the maximum burst will be slightly lower.
78
5
Advanced Operations
With Creative Zone modes,
you can set the desired shutter
speed or aperture value to
obtain the result you want.You
take control of the camera.
¡ The asterisk M on the right of the page title indicates that
the respective feature is available only in Creative Zone
8
modes (d, s, f, a,
).
¡ After you press the shutter button halfway and let go, the
timer operation will keep the LCD panel and viewfinder
information displayed for about 4 sec. (0).
¡ To see what can be set in the Creative Zone modes, see
“Function Availability Table” (p.152).
79
d Program AE
Like <1> (Full Auto) mode, this is a
general-purpose shooting mode. The
camera automatically sets the shutter
speed and aperture value to suit the
subject’s brightness. This is called
Program AE.
* <d> stands for Program
* AE stands for Auto Exposure
Set the Mode Dial to <d>.
1
AF point
Focus the subject.
2
¡ Look through the viewfinder and aim
any AF point over the subject. Then
press the shutter button halfway.
Shutter speed
Aperture
Check the display.
s The shutter speed and aperture value
will be set automatically and
3
displayed in the viewfinder and on the
LCD panel.
¡ A correct exposure will be obtained
as long as the shutter speed and
aperture value display do not blink.
Take the picture.
¡ Compose the shot and press the
4
shutter button completely.
80
d Program AE
¡ If “30"” and the maximum aperture blink, it indicates
that the subject is too dark. Increase the ISO speed
or use flash.
¡
If “4000” and the minimum aperture blink, it indicates that the
subject is too bright. Decrease the ISO speed or use an ND
filter (optional) to reduce the amount of light entering the lens.
Differences Between <d> and <1> (Full Auto)
¡ In both modes, the automatically-set shutter speed and aperture
combination are the same.
¡
In the <
d
> mode, you can set or use the functions below, but not in the <
1> mode.
Shooting Settings
Flash Settings (EX-series Speedlite)
¡ AF mode selection
¡ AF point selection
¡ Drive mode selection
¡ Metering mode selection
¡ Program Shift
¡ Manual/stroboscopic flash
¡ High-speed sync (FP flash)
¡ FE lock
¡ Flash ratio control
¡ Flash exposure compensation
¡ FEB
¡ Exposure compensation
¡ AEB
¡ 2nd-curtain sync
¡ Modeling flash
¡ AE lock with <A> button
¡ Depth-of-field preview
¡ Clear all camera settings
¡ Custom Function (C.Fn)
¡ Clear all Custom Functions
¡ Sensor cleaning
Image-Recording Settings
¡ RAW, RAW+7L selection
¡ ISO speed setting
¡ White balance selection
¡ Custom white balance selection
¡ White balance correction
¡ WB bracketing
Flash Settings (Built-in flash)
¡ Flash On/Off
¡ FE lock
¡ Color space selection
¡ Processing parameter setting
¡
Flash exposure compensation
About Program Shift
¡ In Program AE mode, you can freely change the shutter speed and
aperture value combination (program) set by the camera while
maintaining the same exposure value. This is called program shift.
¡ To do this, press the shutter button down halfway, then turn the <6>
dial until the desired shutter speed or aperture value is displayed.
¡ Program shift is canceled automatically after the image is captured.
¡ If you use flash, you cannot use program shift.
81
s Shutter-Priority AE
In this mode, you set the shutter speed and the camera automatically
sets the aperture value to suit the subject’s brightness. This is called
shutter-priority AE. A fast shutter speed can freeze the motion of a fast-
moving subject, and a slow shutter speed can blur the subject to give
the impression of motion.
* <s> stands for Time value.
Fast shutter speed
Slow shutter speed
Set the Mode Dial to <s>.
1
Set the desired shutter speed.
¡ While looking at the LCD panel, turn
the <6> dial.
2
¡ It can be set in 1/3-stop increments.
Focus the subject.
¡ Press the shutter button halfway.
3
s
The aperture value is set automatically.
Check the viewfinder display and
4 shoot.
¡ As long as the aperture value is not
blinking, the exposure will be correct.
82
s Shutter-Priority AE
¡ If the maximum aperture blinks, it indicates
underexposure. Turn the <6> dial to set a slower
shutter speed until the aperture value stops blinking or
set a higher ISO speed.
¡ If the minimum aperture blinks, it indicates
overexposure. Turn the <6> dial to set a faster
shutter speed until the aperture value stops blinking or
lower the ISO speed.
Shutter Speed Display
The shutter speeds from “4000” to “4” indicate the denominator of the
fractional shutter speed. For example, “125” indicates 1/125 sec.Also, “0"6”
indicates 0.6 sec. and “15"” is 15 sec.
83
f Aperture-Priority AE
In this mode, you set the desired aperture and the camera sets the
shutter speed automatically to suit the subject brightness. This is called
aperture-priority AE.
A larger aperture opening (lower f/number) will result in a blurred
background ideal for portraits. This occurs because a lower f/number
decreases the depth of field (range of acceptable focus). On the other
hand, a smaller aperture opening (higher f/number) will make more of
the foreground and background fall within acceptable focus. A smaller
aperture opening increases the depth of field.
* <f> stands for Aperture value.
With a large aperture opening
With a small aperture opening
Set the Mode Dial to <f>.
1
Set the desired aperture value.
¡ While looking at the LCD panel, turn
the <6> dial.
2
¡ It can be set in 1/3-stop increments.
Focus the subject.
¡ Press the shutter button halfway.
3
s
The shutter speed is set automatically.
Check the viewfinder display and
4 shoot.
¡ As long as the shutter speed is not
blinking, the exposure will be correct.
84
f Aperture-Priority AE
¡ If the “30"” shutter speed blinks, it indicates
underexposure. Turn the <6> dial to set a larger
aperture (lower f/number) until the blinking stops or set
a higher ISO speed.
¡ If the “4000” shutter speed blinks, it indicates
overexposure. Turn the <6> dial to set a smaller
aperture (higher f/number) until the blinking stops or
set a lower ISO speed.
Aperture Value Display
The higher the f/number, the smaller the aperture opening will be. The
aperture values displayed will differ depending on the lens. If no lens is
attached to the camera, “00” will be displayed for the aperture value.
Depth of Field Preview
N
Press the depth-of-field preview button to
stop down to the current aperture setting.
The diaphragm in the lens will close to the
current aperture and you can check the
depth of field (range of acceptable focus)
through the viewfinder.
¡ The higher the f/number, the darker the viewfinder will look.
¡ In the <8> mode, press the shutter button halfway to focus, then
press the depth-of-field preview button while still pressing the shutter
button halfway.
¡ The exposure is locked (AE lock) while you press the depth-of-field
preview button.
85
a Manual Exposure
In this mode, you manually set both the
shutter speed and aperture value as
desired. To determine the correct
exposure, refer to the exposure level
indicator in the viewfinder or use a
handheld exposure meter.This method is
called manual exposure.
* <a> stands for Manual.
Set the Mode Dial to <a>.
1
Set the desired shutter speed.
¡ While looking at the LCD panel, turn
2
the <6> dial.
Set the desired aperture value.
¡ Hold down the <O> and turn the
3
<6> dial.
86
a Manual Exposure
Standard exposure index
Exposure level mark
Focus the subject.
4
5
¡ Press the shutter button halfway.
s The exposure setting will be
displayed on the LCD panel and in
the viewfinder.
¡ The exposure level icon <h> shows
you how far you are from the standard
exposure level.
Set the exposure.
¡ Check the exposure level and set the
desired shutter speed and aperture
value.
: Standard exposure level.
: To set it to the standard
exposure level, set a
slower shutter speed or a
larger aperture opening.
:
To set it to the standard
exposure level, set a
faster shutter speed or a
smaller aperture opening.
Take the picture.
6
If the exposure level mark <h> blinks at the <G> or <F> level, it indicates
that the exposure level exceeds the standard exposure by 2 stops.
87
8
Automatic Depth-of-Field AE
This mode is for obtaining a wide depth of field automatically between a
near subject and far subject. It is effective for group photos and
landscapes.The camera uses the seven AF points to detect the nearest
and farthest subjects to be in focus.
* <8> stands for Auto-depth of field.
8
Set the Mode Dial to <
>.
1
Focus the subject.
2
¡ Move the AF point over the subject
and press the shutter button halfway.
(0)
¡ All the subjects covered by the AF
points flashing in red will be in focus.
¡ Hold down the shutter button halfway
and press the depth-of-field preview
button to see the depth of field (range
of acceptable focus). (p.85)
Take the picture.
3
¡ The <8> mode cannot be used if the lens’ focus mode switch is set
to <MF>. The result will be the same as using the <d> mode.
¡ If the “30"” shutter speed blinks, it indicates that the subject is too dark.
Increase the ISO speed.
¡ If the “4000” shutter speed blinks, it indicates that the subject is too
bright. Decrease the ISO speed.
¡ If the aperture value blinks, it indicates that the exposure level is correct
but the desired depth of field cannot be obtained. Either use a wide-
angle lens or move further away from the subjects.
¡ In this shooting mode, you cannot freely change the shutter speed and
aperture value. If the camera sets a slow shutter speed, hold the camera
steady or use a tripod.
¡ If you use flash, the result will be the same as using <d> with flash.
88
Setting Exposure CompensationN
Exposure compensation is used to alter the standard exposure setting set by the camera.
You can make the image look lighter (increased exposure) or darker (decreased
exposure).You can set the exposure compensation up to 2 stops in 1/3-stop increments.
Turn the Mode Dial to any
1
Creative Zone mode except <a>.
Check the exposure level
2 indicator.
¡ Press the shutter button halfway and
check the exposure level indicator.
Set the exposure compensation
3 amount.
¡ Hold down the <O> and turn the
<6> dial.
¡ To cancel the exposure
compensation, set the exposure
compensation amount back to <E>.
Increased exposure
Standard exposure index
Exposure level mark
Decreased exposure
Decreased
exposure
Increased
exposure
Take the picture.
4
¡ The exposure compensation amount will remain in effect even after the
power switch is set to <2>.
¡ If the standard exposure setting is 1/125 sec. and f/8.0, setting the
exposure compensation amount to plus or minus one stop will be the
same as setting the shutter speed or aperture value as follows:
-1 stop , 0 / +1 stop
Shutter Speed
Aperture Value
250 , 125 / 60
11 8.0 / 5.6
,
89
3 Auto Exposure Bracketing (AEB)N
By changing the shutter speed or aperture automatically, the camera
can bracket the exposure up to 2 stops in 1/3-stop increments for three
successive shots. This is called Auto Exposure Bracketing (AEB).
Standard exposure
Decreased exposure
Increased exposure
Select [AEB].
¡ Select the [m] tab.
¡ Press the <V> key to select [AEB],
then press <0>.
1
Set the AEB amount.
¡ Press the <U> key to set the AEB
amount, then press <0>.
2
¡ When you press the shutter button
halfway, the <h> icon and AEB
amount will appear on the LCD panel.
AEB amount
Standard exposure
Decreased exposure
Increased exposure
Take the picture.
3
s The three bracketed shots will be
exposed in the following sequence:
standard exposure, decreased
exposure, and increased exposure.
s As shown on the left, the respective
bracketing amount will be displayed
as each bracketed shot is taken.
s The current drive mode (p.78) will be
used for the shooting.
90
3 Auto Exposure Bracketing (AEB)N
Canceling AEB
¡ Follow steps 1 and 2 to set the AEB
amount to <
>.
¡ AEB will also be canceled
automatically if you turn the power
switch to <2>, change lenses,
obtain flash-ready, replace the
battery, or replace the CF card.
AEB cannot be used with flash or bulb exposures.
¡ If the drive mode is set to continuous (i), the three bracketed shots will
be taken continuously and then the shooting will stop automatically. If the
drive mode is set to single image (u), you must press the shutter button
three times.
¡ If the self-timer/remote control has been set, the three bracketed shots
will be taken continuously.
¡ If C.Fn-7 [Mirror lockup] is set to [1:Enabled] (p.150), the drive mode
for AEB will be single even if it is set to continuous.
¡ AEB can be combined with exposure compensation.
91
A AE LockN
AE lock enables you to lock the exposure at a different place from the
point of focus. By locking the exposure, you can recompose the shot
while maintaining the same exposure setting.This is called AE lock. It is
effective for backlit subjects.
Focus the subject.
1
¡ Press the shutter button halfway.
s
The exposure setting will be displayed.
Press the <A> button. (0)
2
s The <A> icon lights in the viewfinder
to indicate that the exposure setting is
locked (AE lock).
¡ Each time you press the <A> button,
it locks the current exposure setting.
AE lock indicator
Recompose and take the picture.
3
¡ If you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
¡
If the AF mode is One-Shot AF or AI Focus AF (when not AI Servo AF) and
the metering mode is < > (Evaluative), pressing the shutter button halfway
will automatically set AE lock at the same time when focus is achieved.
q
¡ The AE lock effect will differ depending on the AF point and metering
mode. For details, see “AE Lock” (p.153).
92
Bulb Exposures
When bulb is set, the shutter stays open while you hold down the
shutter button fully, and closes when you let go of the shutter button.
This is called bulb exposure. Use bulb exposures for night scenes,
fireworks, the heavens, and other subjects requiring long exposures.
Set the Mode Dial to <a>.
1
Set the shutter speed to “buLb.”
2
¡ Look at the LCD panel and turn the
<6> dial to select “buLb.”
¡ The next setting after “30"” is “buLb.”
Set the desired aperture value.
3
¡ Hold down the <O> button and
turn the <6> dial.
Take the picture.
¡ Press the shutter button completely.
4
s
The elapsed exposure time will be displayed on
the LCD panel. (Displays 1 sec. to 999 sec.)
¡ The exposure continues as long as
you hold down the shutter button.
Elapsed exposure time (sec.)
Aperture
Since bulb exposures will have more noise than usual, the image will look
grainy.
¡
Bulb exposures may result in grainy images due to picture noise.You can reduce
noise by setting C.Fn-2 [Long exposure noise reduction] to [1: On] (p.148).
For bulb exposures, using Remote Switch RS-60E3 (optional) is recommended.
Remote Controller RC-1/RC-5 (optional) can also be used for bulb
exposures. When you press the transmit button, the exposure will start 2
sec. later. To stop the exposure, press the button again.
¡
¡
93
Mirror LockupN
Mirror lockup is enabled with C.Fn-7 [Mirror lockup] set to [1: Enable]
(p.150). The mirror can be swung up separately from when the
exposure is made. This prevents mirror vibrations which may blur the
image during close-ups or when a super telephoto lens is used. Set
Custom Functions with [b Custom Functions (C.Fn)].
Press the shutter button
completely.
s The mirror will swing up.
1
Again press the shutter button
2 completely.
s The picture is taken and the mirror
goes back down.
¡ In very bright places such as at the beach or ski ground on a sunny day,
take the picture promptly after mirror lockup.
¡ During mirror lockup, do not point the camera lens at the sun. The sun’s
heat can scorch and damage the shutter curtains.
¡ If you use bulb exposures, the self-timer, and mirror lockup in
combination, keep pressing the shutter button completely (2 sec. self-
timer + bulb exposure time). During the 2-sec. self-timer countdown, if
you let go of the shutter button, there will be a shutter-release sound.
This is not the shutter being released (no picture is taken).
¡ During mirror lockup, the drive mode will be set to single shooting
regardless of the current drive mode setting (single or continuous).
¡ If you use the self-timer and mirror lockup, press the shutter button
completely and the shot will be taken 2 sec. after the mirror goes up.
¡
The mirror locks up, and after 30 seconds, it will go back down automatically.
Pressing the shutter button completely again locks up the mirror again.
¡ For mirror lockup shots, using Remote Switch RS-60E3 (optional) is
recommended.
¡
Remote Controller RC-5 (optional) can also be used for mirror lockup shots. Press
the transmit button and the mirror locks up before the shot is taken 2 sec. later.
94
6
Flash Photography
The built-in flash or an EOS-
dedicated, EX-series Speedlite
enables E-TTL II autoflash
(evaluative flash metering with
preflash), making flash
photography as easy as normal
shooting. The result is natural-
looking flash photos. In the Basic
Zone modes (except <3> <5>
<7>), flash photography is fully
automatic. In Creative Zone modes,
flash can be used whenever
necessary.
95
Using the Built-in Flash
E-TTL II autoflash obtains high-precision and consistent flash shots.
Using the Built-in Flash in the Basic Zone
If necessary, the built-in flash will pop-up automatically in low-light
or backlit conditions. (except in the <3> <5> <7> modes)
Using the Built-in Flash in the Creative Zone
Regardless of the light level, you can press the <D> button to pop-up
and fire the built-in flash whenever desired.
d
: For fully automatic flash photography. The shutter speed (1/
60 sec. - 1/200 sec.) and aperture value are set automatically,
just as in <1> (Full Auto) mode.
s
: Enables you to set the desired shutter speed (30 sec. - 1/
200 sec.). The camera then automatically sets the flash
aperture value to obtain the proper exposure at the shutter
speed you have set.
f
: Enables you to set the desired aperture value. The camera
then automatically sets the shutter speed (30 sec. - 1/200
sec.) to obtain the proper exposure at the aperture you have
set.
Against dark backgrounds such as the night scenes, slow-sync
shooting will be set so that both the subject and background are
exposed correctly. The main subject is exposed with the flash,
and the background is exposured with a slow shutter speed.
¡Because automatic slow-sync shooting uses a slow shutter
speed, always use a tripod.
¡If you do not want a slow shutter speed to be set, set C.Fn-3
[Flash sync. speed in Av mode] to [1: 1/200sec. (fixed)].
(p.148)
a
:You can set both the shutter speed (bulb or 30 sec. - 1/200
sec.) and aperture value. The main subject is exposed
properly by the flash. The background exposure will vary
depending on the shutter speed and aperture.
8: The flash result will be the same as the <d> mode.
96
Using the Built-in Flash
Built-in Flash Range
With EF-S18-55mm f/3.5-5.6 ll
[m / ft]
ISO speed
100
Wide angle: 18mm
Approx. 1 - 3.7 / 3.3 - 12.1
Telephoto: 55mm
Approx. 1 - 2.3 / 3.3 - 7.5
200
Approx. 1 - 5.3 / 3.3 - 17.4 Approx. 1 - 3.3 / 3.3 - 10.8
Approx. 1 - 7.4 / 3.3 - 24.3 Approx. 1 - 4.6 / 3.3 - 15.1
Approx. 1 - 10.5 / 3.3 - 34.4 Approx. 1 - 6.6 / 3.3 - 21.7
Approx. 1 - 14.9 / 3.3 - 48.9 Approx. 1 - 9.3 / 3.3 - 30.5
400
800
1600
With EF-S17-85mm f/4-5.6 IS USM
[m / ft]
ISO speed
100
Wide angle: 17mm
Approx. 1 - 3.3 / 3.3 - 10.8
Telephoto: 85mm
Approx. 1 - 2.3 / 3.3 - 7.5
200
Approx. 1 - 4.6 / 3.3 - 15.1 Approx. 1 - 3.3 / 3.3 - 10.8
Approx. 1 - 6.5 / 3.3 - 21.3 Approx. 1 - 4.6 / 3.3 - 15.1
Approx. 1 - 9.2 / 3.3 - 30.2 Approx. 1 - 6.6 / 3.3 - 21.7
Approx. 1 - 13.0 / 3.3 - 42.7 Approx. 1 - 9.3 / 3.3 - 30.5
400
800
1600
¡ Use the built-in flash at least 1 m/3.3 ft away from the subject. Closer
distances will cause the lens barrel to partially obstruct the flash.
¡ When using the built-in flash, detach any hood attahed to the lens. A lens
hood will partially obstruct the flash.
¡ A super telephoto lens or fast, large-aperture lens may partially obstruct
the built-in flash coverage. In such a case, using an EX-series Speedlite
(optional) is recommended.
¡ The built-in flash’s coverage is effective with lens focal lengths as short
as 17mm. If the lens is shorter than 17mm, the periphery of the flash
photo will look dark.
¡ To retract the flash, push it back down.
¡ In the <s> <a> modes, even if you set the shutter speed to one faster
than 1/200 sec., it will be set automatically to 1/200 sec.
¡ If autofocus cannot be achieved, the AF-assist beam (small flashes fired
by the built-in flash) will be fired automatically (except in the <3> <5>
<7> modes). (p.74)
97
Using the Built-in Flash
Using Red-eye Reduction
When flash is used in a low-light environment, the subject’s eyes may
look red in the image. “Red eye” happens when the light from the flash
reflects off the retina of the eyes. The camera’s red-eye reduction
feature turns on the red-eye reduction lamp to shine a gentle light into
the subject’s eyes to narrow the pupil diameter or iris. A smaller pupil
reduces the chances of red eye from occurring. Red-eye reduction can
be set in any shooting mode except <3> <5> <7>.
Select [Red-eye On/Off].
1
¡ Select the <z> tab.
¡ Press the <V> key to select [Red-
eye On/Off], then press <0>.
Set the red-eye reduction.
2
¡ Press the <V> key to select [On],
then press <0>.
¡ When you press the shutter button
halfway, the <L> icon will be
displayed in the viewfinder.
¡
When you press the shutter button down
halfway, the red-eye reduction lamp
indicator appears in the viewfinder.
¡ Red-eye reduction will not work unless the
subject looks at the red-eye reduction lamp.
Tell the subject to look at the lamp.
¡ To increase the effectiveness of red-eye
reduction, press the shutter button down fully
after the red-eye reduction lamp (which lights for
approximately 1.5 seconds) indicator goes off.
Red-eye
reductionlamp
On indicator
¡ You can shoot anytime by pressing the shutter button down fully, even
while the red-eye reduction lamp is still on.
¡ The effectiveness of red-eye reduction varies from subject to subject.
¡ Red-eye reduction is more effective in brighter rooms or when the
camera is closer to the subject.
98
Using the Built-in Flash
A FE lockN
FE (flash exposure) lock obtains and locks the correct flash exposure
reading for any part of a subject.
Check that the <D> icon is lit.
1
¡ Press the <D> button to pop-up the
built-in flash.
¡ Press the shutter button halfway and
look in the viewfinder to check that
the <D> icon is lit.
Focus the subject.
2
¡
Press the shutter button halfway. Keep
pressing the shutter button halfway until step 4.
Press the <A> button. (8)
3
¡
Aim the viewfinder center over the
subject where you want to lock the flash
exposure, then press the <A> button.
s
The Speedlite will fire a preflash and the required
flash output is calculated and retained in memory.
s In the viewfinder, “FEL” is displayed
for a moment and <A> will light.
¡
Each time you press the <A> button, a
preflash is fired and the required flash
output is calculated and retained in memory.
Take the picture.
¡ Compose the shot and press the
shutter button fully.
4
s The flash is fired to take the picture.
If the subject is too far away and beyond the effective range of the flash, the
<D> icon will blink. Get closer to the subject and repeat steps 2 to 4.
99
Using the Built-in Flash
y Flash Exposure CompensationN
In the same way as normal exposure compensation, you can set
exposure compensation for flash.You can set flash exposure
compensation up to 2 stops in 1/3-stop increments.
Select [Flash exp comp].
¡ Select the [m] tab.
¡ Press the <V> key to select [Flash
1
exp comp], then press <0>.
Set the flash exposure
2 compensation amount.
¡ Press the <U> key to set the
desired amount, then press <0>.
Standard exposure index
Exposure level mark
Decreased
exposure
Increased
exposure
¡ To cancel the flash exposure
compensation, set the flash exposure
compensation amount back to <E>.
¡ When you press the shutter button
halfway, the <y> icon will be
displayed in the viewfinder and on the
LCD panel.
Take the picture.
3
¡ The flash exposure compensation amount will remain in effect even after
you turn the power switch to <2>.
¡ The procedure is the same with EX-series Speedlites. The flash
exposure compensation amount can be set with the camera.
100
Using EOS-Dedicated, External Speedlites
With EX-series Speedlites
An EOS-dedicated, EX-series Speedlite (optional) makes flash photography
as easy as normal shooting.You can easily do the flash operations below. For
detailed procedures, see the Speedlite’s instruction manual.
¡
E-TTL II Autoflash
E-TTL II is a new autoflash exposure system incorporating improved flash
exposure control and lens focusing distance information, making it more precise
than the previous E-TTL (evaluative flash metering with preflash) system. The
camera can execute E-TTL II autoflash with any EX-series Speedlite.
• High-Speed Sync (FP flash)
With high-speed sync, you can set a sync speed faster than 1/200 sec.
• FE (Flash Exposure) Lock
Press the camera’s <A> button to lock the flash exposure at the desired part
of the subject.
• Flash Exposure Compensation
In the same way as normal exposure compensation, you can set exposure
compensation for flash.The flash exposure compensation amount can be set with the
camera up to 2 stops in 1/3-stop increments. With Speedlites which you can set the
flash exposure compensation, it can be set up to 3 stops in 1/3-stop increments.
• FEB (Flash Exposure Bracketing)
The flash output is changed automatically for three successive shots (only with
FEB-compatible Speedlites). Set flash exposure bracketing up to 3 stops in 1/
3-stop increments.
• E-TTL II Wireless Autoflash with Multiple Speedlites
As with wired, multiple Speedlites, wireless E-TTL II autoflash with multiple Speedlites
provides all the above features. Since connection cords are unnecessary, flexible and
sophisticated lighting setups are possible (only with wireless-compatible Speedlites).
About EZ/E/EG/ML/TL-series Speedlites
The flash cannot be fired with an EZ/E/EG/ML/TL-series Speedlite
set in the TTL or A-TTL autoflash mode. Use the Speedlite’s manual
flash mode instead if provided.
101
Using EOS-Dedicated, External Speedlites
¡ Before attaching an external Speedlite, retract the built-in flash if it is
popped up.
¡ If the EX-series Speedlite’s firing mode is set to TTL autoflash with the
Custom Function, the Speedlite will not fire.
¡ If autofocus cannot be achieved, the external, EOS-dedicated
Speedlite’s AF-assist beam (if the Speedlite has an AF-assist beam) will
be emitted automatically (except in the <3> <5> <7> modes).
¡ The camera is a Type-A camera that can use all the features of EX-
series Speedlites.
Using Non-Canon Flash Units
The camera can synchronize with compact, non-Canon flash units at 1/
200 sec. or slower. Be sure to test the flash unit beforehand to make
sure it synchronizes properly with the camera.
¡
¡
If the camera is used with a flash unit or flash accessory dedicated to another
camera brand, the camera may not operate properly and malfunction may result.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might not work.
U LCD Panel Illumination
The LCD panel is provided with
illumination.
To illuminate the LCD panel, press the
<U> button (9). To turn off the
illumination, press the button again. Use
it to read the LCD panel in the dark.
¡ Pressing any shooting-related button or turning the Mode Dial while the
LCD panel is illuminated prolongs the illumination.
¡ When the camera is connected to a printer and the <U> button turns
blue, the button functions as a Direct print button. (p.136)
102
7
Image Playback
This chapter explains image playback operations such
as how to view and erase captured images and how to
connect the camera to a TV monitor.
For images taken with another camera:
The camera might not be able to properly display images
captured with a different camera or edited with a personal
computer or whose file name was changed.
103
3 Setting the Image Review Time
You can set how long the image is to be displayed on the LCD monitor
right after it is captured. To keep the image displayed, set [Hold]. To not
have the image displayed, set [Off].
Select [Review time].
1
¡ Select the [x] tab.
¡ Press the <V> key to select
[Review time], then press <0>.
Set the desired review time.
2
¡ Press the <V> key to select the
desired setting, then press <0>.
¡ If you press the <B> button during the image review right after
shooting, you can change the display format.
¡ The [Hold] setting keeps displaying the image until you press the shutter
button halfway. However, if auto power off has been set, the camera will
turn off automatically after the auto power off time elapses.
¡ During the image review for single-shooting, you can delete the
displayed image by pressing the <L> button and selecting [OK].
¡ To view the images captured so far, see “Image Playback” (p.107).
104
3 Auto Image Rotation
Vertical shots can be rotated automatically so that they are displayed
upright during playback.
Select [Auto rotate].
1
¡ Select the [c] tab.
¡ Press the <V> key to select [Auto
rotate], then press <0>.
Select [On].
¡ Press the <V> key to select [On],
2
then press <0>.
Take a vertical shot.
3
¡ The image review right after image
capture will not display the image
vertically on the LCD monitor.
Playback the image.
4
¡ Press the <x> button.
s The vertical shot will be displayed
vertically as shown on the left.
¡ Auto rotate will work only if [Auto rotate] has been set to [On]. Auto
rotate will not work with vertical images captured while [Auto rotate] was
[Off]. It will not rotate even if you later switch it to [On] for playback.
¡ If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
When you change the camera’s orientation between horizontal and vertical,
the camera orientation sensor will make a small sound. This is normal and
not a defect.
105
3 Setting the LCD Brightness
You can adjust the brightness of the LCD monitor to one of five levels.
Select [LCD brightness].
¡ Select the [c] tab.
¡ Press the <V> key to select [LCD
brightness], then press <0>.
s The LCD Brightness screen will
appear.
1
Adjust the brightness.
2
¡ While looking at the gray chart on the
left, press the <U> key to adjust.
¡ Press <0> to exit the setting and
return to the menu.
To check the image’s exposure, look at the histogram (p.108).
106
Image Playback
You can select any captured image to view.You can view a single
image, the shooting information, an index display, or a magnified view.
xSingle image display
Playback the image.
1
¡ Press the <x> button.
s The last captured image will appear
on the LCD monitor.
Select the image.
¡ To view images starting with the last
2
image, press the <Y> key. To view
images starting with the first image,
press the <Z> key.
¡ Press the <B> button to switch
the display format.
Single image display
(with basic info)
Shooting information
Single image display
(no shooting info)
¡ To quit the playback, press the <x>
button. The LCD monitor will turn off.
¡
Even in display formats other than single image (index display, magnified
view, etc.), you can press the <
info.
B> button to display or hide the basic
¡ After continuous shooting while data is being written to the CF card
(access lamp blinking), press the <x> button to display the last image
which has been written to the CF card so far. Press the <U> key to
select the image.You can view in sequence the images whose writing to
the CF card has been completed.
107
Image Playback
Shooting Information Display
File No.
Histogram
Image
ISO speed
Flash exposure
Color space
Metering mode
Shooting mode
WB correction
White balance
compensation amount
Shooting time
Shooting date
Shutter speed
Images recorded/
Total images recorded
Aperture
Image protect
Monochrome
Exposure compensation amount
Image-recording quality
Histogram
Sample Histograms
A histogram is a graph indicating the image’s
brightness distribution. The horizontal axis indicates
the brightness level (darker on the left and brighter on
the right), while the vertical axis indicates how many
pixels exist for each brightness level.
Dark image
The more pixels there are toward the left, the darker
the image. And the more pixels there are toward the
right, the brighter the image.
If there are too many pixels on the left, the shadow
detail will be lost. And if there are too many pixels on
the right, the highlight detail will be lost.The tones in-
between will be reproduced.
Normal image
Bright image
With the image’s histogram, you can check how
accurate or lopsided the exposure is and how rich the overall tonal range is.
Highlight Alert
When the shooting information is displayed, any overexposed areas of
the image will blink. To obtain more image detail in the overexposed
areas, set the exposure compensation to a negative amount and shoot
again.
108
Image Playback
H Index Display
Nine thumbnail images are displayed on one screen.
Playback the image.
1
¡ Press the <x> button.
s The last captured image will appear
on the LCD monitor.
Display the index images.
2
3
¡ Press the <I> button.
s The selected thumbnail will be
highlighted within a green frame.
Select the image.
¡ Press the <S> keys to move the
green frame in the respective
direction.
Switching from the index display to another display mode
¡ To display a single image, press the <x> button.
¡ Pressing the <u> button switches to the single image display and
pressing it again switches to magnified view.
While the index is displayed, press the <C> button, then press the
<U> key to jump nine images forward or back. (p.111)
109
Image Playback
u/y Magnified View
You can magnify the image by 1.5x to 10x on the LCD monitor.
Playback the image.
¡ Display the image in the single-image
1
or image info display mode.
Magnify the image.
2
¡ Press the <u> button.
s At first, the center of the image will be
magnified.
¡ To increase the magnification, hold
down the <u> button.
¡ Press the <I> button to reduce
the magnification. If you hold down
the button, the magnification will
decrease until it reaches the size in
step 1.
Magnified area
Scroll around the image.
3
¡ Press the <S> keys to scroll around
in the respective direction.
¡ Repeat steps 2 and 3 to magnify
other areas of the image.
¡ To exit the magnified display, press
the <x> button and the single image
display will return.
While in the magnified view, you can maintain the same magnified area and
magnification when you turn the <6> dial to view another image.
110
Image Playback
C Jump Display
During the single image, image with shooting information, index, or magnified
image display, you can jump forward or back to images stored on the CF card.
Playback the image.
1
How to use Jump function
Go to the jump display.
2
¡ Press the <C> button.
s On the lower right of the screen, you
can see the jump bar.
¡
During the single image or image with
shooting information display, you can
switch the jump method (10 images/100
Jump bar
images/Date) by pressing the <
V> key.
Jump forward or back.
¡ Press the <U> key.
3
¡ To quit the image jump, press the
<C> button. The jump bar will
disappear.
Jumping during the single image or image with shooting information display
Jump by 10 images or 100 images
Press the <Y> key to jump back by 10 images/100 images. Or
press the <Z> key to jump forward by 10 images/100 images.
Jump by
date
You can jump to a picture taken on a specific date. (If there are multiple pictures taken on the
same date, the display will jump to the first picture taken on that date.) Press the < > key to
> key to jump forward to a newer picture.
Y
jump back to an older picture. Or press the <
Z
Jumping in the magnified view
Turn the <6> dial counterclockwise to jump ten images backward,
or turn it clockwise to jump ten images forward. The magnified
position and magnification will be maintained during the image jump.
Jumping in the index display mode
Press the <
Y
> key to jump back by 9 images. Or press the <
Z
> key to jump forward by 9 images.
111
Image Playback
3 Automated Playback of Images (Auto Play)
You can playback the CF card’s images in an automatic slide show.
Each image will be displayed for about 3 sec.
Select [Auto play].
1
¡ Select the [x] tab.
¡ Press the <V> key to select [Auto
play], then press <0>.
s The Autoplay screen will appear.
Start the auto play.
s After [Loading image...] is displayed
for a few seconds, auto play will start.
¡ To pause the auto play, press <0>.
¡ During pause, [ ] will be displayed
on the upper left of the image.Press
2
<0> again to resume the auto play.
d
Stop the auto play.
¡ To stop the auto play and return to the
3
menu, press the <M> button.
¡ During auto play, auto power off will not work.
¡ The display time may vary depending on the image.
¡ During auto play, you can press the <B> button to change the display
format.
¡ During pause, you can press the <U> key to view another image.
112
Image Playback
3 Rotating an Image
You can rotate an image by 90° or 270° clockwise. The image can then
be displayed in the correct orientation during playback.
Select [Rotate].
1
¡ Select the [x] tab.
¡ Press the <V> key to select
[Rotate], then press <0>.
s The Rotate screen will appear.
Rotate the image.
2
¡ Press the <U> key to select the
image to be rotated, then press
<0>.
s Each time you press <0>, the image
will rotate clockwise.
¡ To rotate another image, repeat step
d
2.
¡ To exit the Rotate screen and return
to the menu, press the <M>
button.
¡ If you have set [c Auto rotate] to [On] (p.105) before taking the
vertical shots, you need not rotate the image as described above.
¡ You can rotate the image even after you change the display format to
shooting info display, magnified view, or index display after step 1.
113
Displaying the Images on TV
By connecting the camera to a TV set with the video cable (provided),
you can view the captured images on a TV set. Always turn off the
camera and the television before connecting or disconnecting them.
Connect the camera to the TV.
1
¡ Open the camera’s terminal cover.
¡ Use the video cable (provided) to
connect the camera’s <D> terminal
to the TV monitor’s VIDEO IN
terminal.
¡ Insert the cable plug all the way in.
Turn on the TV and switch the
2 TV’s line input to Video IN.
Video IN terminal
Turn the power switch to <1>.
3
Press the <x> button.
4
s The image will appear on the TV
screen. (The camera’s LCD monitor
will display nothing.)
¡ After you finish, set the power switch
to <2>, turn off the TV, then
disconnect the video cable.
¡ If the proper video system format is not set, the image will not be
displayed properly. Set the proper video system format with [b Video
system].
¡ Do not use any video cable other than the one provided. Images might
not be displayed if you use a different video cable.
¡ Depending on your TV or monitor, part of the image might be truncated.
114
3 Protecting Images
This prevents the image from being erased accidentally.
Select [Protect].
1
¡ Select the [x] tab.
¡ Press the <V> key to select
[Protect], then press <0>.
s The Protect screen will appear.
Protect the image.
2
¡ Press the <U> key to select the
image to be protected, then press
<0>.
s When an image is protected, the
<K> icon will appear below the
Image protect icon
image.
¡ To cancel the image protection, press
the <0> button again. The <K>
icon will disappear.
¡ To protect another image, repeat step
2.
¡ To exit the Protect screen and return
to the menu, press the <M>
button.
¡ Once an image is protected, it cannot be erased by the camera’s Erase
function. To erase a protected image, you must first cancel the
protection.
¡ If you erase all the images (p.117), only the protected images will
remain. This is convenient when you want to erase unnecessary images
all at once.
¡ You can protect the image even after you change the display format to
shooting info display, magnified view, or index display after step 1.
115
L Erasing Images
You can erase images individually or erase all the images at one time in
the CF card. Protected images (p.115) will not be erased.
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it.To prevent
important images from being erased accidentally, protect
them.
Erasing a Single Image
Playback the image.
1
¡ Press the <x> button.
Select the image to be erased.
2
¡ Press the <U> key to select the
image to be erased.
Display the Erase menu.
3
¡ Press the <L> button.
s The Erase menu will appear at the
bottom of the screen.
Erase the image.
4
¡ Press the <U> key to select
[Erase], then press <0>.
s The access lamp will blink and the
image will be erased.
¡ If there are other images you want to
select, repeat steps 2 to 4.
116
L Erasing Images
Erasing All Images
Playback the image.
¡ Press the <x> button.
1
2
Display the Erase menu.
¡ Press the <L> button.
s The Erase menu will appear at the
bottom of the screen.
Select [All].
¡ Press the <U> key to select [All],
then press <0>.
3
s The confirmation dialog will appear.
Erase the image.
¡ Press the <U> key to select [OK],
then press <0>.
4
s All unprotected images will be
erased.
¡ While the images are being erased,
you can cancel the erasure by
pressing <0>.
After continuous shooting, while data is being written to the CF card (access
lamp blinking), you can press the <x> button and then press the <L>
button to erase the displayed image or all images. If you select [All] and
press <0>, the images captured during continuous shooting (including
those not yet processed) and all the images on the CF card will be erased.
117
3 Formatting the CF Card
Format the CF card before using it in the camera.
Formatting a CF card will erase everything in the card. It will
also erase any protected images, so make sure the card has
nothing you need to keep. If necessary, transfer the images to
a personal computer before formatting the card.
Select [Format].
1
¡ Select the [c] tab.
¡ Press the <V> key to select
[Format], then press <0>.
s The confirmation dialog will appear.
Format the CF card.
2
¡ Press the <U> key to select [OK],
then press <0>.
s The CF card will be formatted
(initialized).
s When the formatting is completed,
the menu will reappear.
¡ A non-Canon CF card or a CF card formatted with another camera or
personal computer might not work properly with the camera. If this
happens, format the card with the camera first. Then it might work with
the camera.
¡ The CF card’s capacity displayed on the Format screen may be lower
than the capacity indicated on the card.
Handling “Err CF”
“Err CF” (CF error) displayed on the LCD panel indicates a problem with the
CF card that prevents images from being recorded or read. Use another CF
card instead.
Or, if you have a commercially-available CF card reader that can read the
CF card, use it to transfer all the images in the card to a personal computer.
After transferring all the images to a personal computer, format the CF card.
It may then return to normal.
118
8
Direct Printing
from the Camera
You can connect the camera directly to a printer and
print out the images in the CF card.
The camera enables direct printing with printers
compatible with “<w> PictBridge”, Canon “<A> CP
Direct”, and Canon “<S> Bubble Jet Direct.”
119
Conventions Used in this Chapter
This chapter includes procedures for various types of printers. After
“Preparing to Print” on the next page, follow the instructions applicable
to your printer on the pages indicated.
Non-Canon
printer
Canon CP printer
Canon PIXMA/DS/BJ printer
Compatible
Compatible with
Compatible
with PictBridge
Bubble Jet Direct only
with PictBridge
wPictBridge
or
ACP Direct
SBubble Jet
wPictBridge
wPictBridge
Direct
Preparing to Print : Page 121 - 123
Page 124 - 127 Page 131 - 133
w
A
Page 124 - 127
Page 128 - 130
Page 124 - 127
Canon’s PictBridge Web Site
The Web site below gives more information about using your Canon
camera with various printers such as which paper types to use.
http://canon.com/pictbridge/
120
Preparing to Print
You do the direct printing procedure entirely through your
camera’s LCD monitor.
Setting the Camera
Select [Communication].
¡ Select the [b] tab.
¡ Press the <V> key to select
1
[Communication], then press <0>.
Select [Print/PTP].
¡ Press the <V> key to select [Print/
2
PTP], then press <0>.
When connecting the camera to a personal computer, set
[Communication] to [PC connection].Communication between the camera
and personal computer will not work if [Print/PTP] is set.
Connecting the Camera to the Printer
Turn the camera’s power switch
to <2>.
1
Set up the printer.
2
¡ For details, refer to the printer’s
manual.
¡ RAW images are not compatible with direct printing.
¡ Do not disconnect the cable during direct printing.
121
Preparing to Print
Connect the camera to the
3 printer.
¡ Refer to the table (Printers and
Cables) below to select the proper
cable to connect the camera to
printer.
Printers and Cables
Printer Compatibility
Suitable Cable
PictBridge only
w
w
A
PictBridge and
CP Direct
Interface cable provided with camera
The plug at both ends have the <D>
icon.
w
S
PictBridge and
Bubble Jet Direct
CP Direct only
A
Cable provided with printer
Only one plug has the <D> icon.
Bubble Jet Direct only
S
¡ When connecting the cable plug to
the camera’s <C> terminal, the
cable plug’s <D> icon must face the
front side of the camera.
¡ To connect to the printer, refer to the
printer’s instruction manual.
Turn on the printer.
4
Turn the camera’s power switch
5 to <1>.
s Some printers may have a beeping
sound.
122
Preparing to Print
Playback the image.
¡ Press the <x> button.
s The image will appear and one of
three icons <w/ A/ S> will appear
on the upper left to indicate that the
camera is connected to the
wPictBridge
ACP Direct
6
respective type of printer.
s The Direct print button lamp will light
in blue.
SBubble Jet Direct
¡ The procedure will be different
depending on the icon displayed. See
the applicable pages below.
Icon
Reference pages
124 - 127, 136
w
128 - 130, 136
131 - 133, 136
A
S
¡ If the camera is running by battery power, make sure it is fully charged.
During direct printing, keep checking the battery level.
¡ If there is a long beeping sound in step 5, it indicates a problem with the
PictBridge printer. To find out what’s wrong, do the following:
Press the <x> button to playback the image and follow the steps below.
1. Press <0>.
2. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor. See “Error
Messages” on page 127.
¡ Before disconnecting the cable, turn off the camera and printer. Pull out
the cable while holding the plug, not the cord.
¡ When connecting the camera to the printer, do not use any cable other
than the dedicated interface cable.
For direct printing, using AC Adapter Kit ACK-DC20 (optional) to power the
camera is recommended.
123
wPrinting with PictBridge
The setting options will differ depending on the printer. Some
settings might be disabled. For details, refer to your printer’s instruction
manual.
Printer-connected icon
Select the image(s) to be printed.
¡ Check that the <w> icon is
1
displayed on the upper left of the LCD
monitor.
¡ Press the <U> key to select the
image to be printed.
0
Press < >.
2
s The Print setting screen will appear.
Print setting screen
Set the date imprinting to on or off.
Set the printing effects.
Set the quantity to be printed.
Set the trimming area.
Set the paper size, type, and layout.
Returns to the screen in step 1.
Starts the printing.
The paper size, type, and layout you have set will be displayed.
* Depending on your printer, certain settings like date imprinting and
trimming might not be available.
Select [Paper Settings].
3
¡ Press the <V> key to select [Paper
settings], then press <0>.
s The Paper settings screen will
appear.
124
wPrinting with PictBridge
TSetting the Paper Size
¡ Press the <V> key to select the
size of the paper loaded in the printer,
then press <0>.
s The Paper Type screen will appear.
YSetting the Paper Type
¡ Press the <V> key to select the
type of the paper loaded in the
printer, then press <0>.
s The Page Layout screen will appear.
About the Paper Types
If you are using a Canon PIXMA/DS/BJ printer with Canon paper, set
the respective paper type as follows:
Photo
Photo Paper Plus Glossy
Fast Photo Photo Paper Pro
Default
Photo Paper Plus Glossy
If you are using a non-Canon printer, refer to the printer’s instruction
manual.
USetting the Layout
¡ Press the <V> key to select the
desired layout, then press <0>.
s The Print setting screen will reappear.
125
wPrinting with PictBridge
Layout Settings
The print will have no borders.
If your printer cannot print borderless prints, the print will have
borders.
Borderless
Bordered
**-up
The print will have a white border along the edges.
Option to print 2, 4, 8, 9, 16, or 20 copies of same image on one
sheet.
Default
With a Canon printer, the default is borderless.
Set the other options.
4
¡ If desired, also set the <H> date
imprinting, <E> printing effects, and
<R> number of copies.
HDate imprinting
EPrinting effects
RNumber of copies
¡ Press the <V> key to select the
desired option.
¡ Press the <U> key to select the
desired setting.
¡ Depending on the BJ printer, the
<E> Printing effects setting may
enable you to select the [Vivid] (for
vivid greens and blue sky), [NR]
(noise reduction), [Vivid+NR] or [On]
setting.
¡ For details on trimming, see page
134.
126
wPrinting with PictBridge
Start printing.
¡ Press the <V> key to select [Print],
then press <0>.
5
s The printing will start.
¡ When the printing ends, the screen
will return to step 1.
¡ To stop the printing, press <0> while
[Stop] is displayed, then select [OK]
and press <0>.
¡ Depending on the image’s file size and recording quality, it may take
some time for the printing to start after you select [Print].
¡ The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings
are.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.
Error Messages
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After resolving the
problem, resume printing. For details on how to resolve a problem with the
printer, refer to the printer’s instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
The printer has run out of ink or the waste ink tank is full.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge.
Images taken with a different camera or images edited with a computer
might not be printable.
127
A Printing with CP Direct
Printer-connected icon
Select the image to be printed.
1
¡ Check that the <A> icon is displayed
on the upper left of the LCD monitor.
¡ Press the <U> key to select the
image to be printed.
Press <0>.
s The Print setting screen will appear.
2
Print setting screen
Set the quantity to be printed.
Set the trimming area.
Set the printing style.
Returns to the screen in step 1.
Starts the printing.
The printing style settings are displayed.
<H> is the date icon.
Select [Style].
¡ Press the <V> key to select
[Style], then press <0>.
3
s The Style screen will appear.
128
A Printing with CP Direct
Set the options as desired.
¡ Set the [Image], [Borders], and
4
[Date] as desired.
[Image]
[Borders]
[Date]
¡ Press the <V> key to select the
desired option, then press <0>.
¡ Press the <V> key to select the
desired setting, then press <0>.
¡ [Image] is selectable when credit
card-size paper is used. If you select
[Multiple], 8 small images of the
same picture will be printed on the
paper.
¡ Check the [Borders] and [Date]
settings and set them if necessary.
¡ When you are done, press the
<7> button to return to the Print
setting screen.
Set the number of copies.
¡ Set as necessary.
¡ Press the <V> key to select
[copies].
5
¡ Press the <U> key to set the
desired quantity.
¡ Set a number from 1 to 99.
129
A Printing with CP Direct
Set the trimming.
6
7
¡ Set as necessary.
¡ For details on trimming, see page
134.
Start printing.
¡ Press the <V> key to select [Print],
then press <0>.
s The printing will start.
¡ When the printing ends, the screen
will return to step 1.
¡ To stop the printing, press <0> while
[Stop] is displayed, then select [OK]
and press <0>.
¡ The date may look light if it is imprinted on a bright background or border.
¡ If [Multiple] is selected, [Borders] and [Date] cannot be selected.
[Borderless] will be set and [Date] will be set to [Off]. The image will
also be cut off along all four edges.
¡ If [Date] is [On], the date recorded for the image will appear on the
print.The date will appear on the lower right of the image.
¡ If you select [Stop] while printing only one image, the printing will not
stop until it finishes printing the image. If you are printing multiple
images, the printing will stop after the current image is finished printing.
¡ If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Select [Stop] or [Resume] (after resolving the
problem). If [Resume] is not displayed, select [Stop].
130
S Direct Printing with Bubble Jet Direct
Select the image to be printed.
Printer-connected icon
1
¡ Check that the <S> icon is displayed
on the upper left of the LCD monitor.
¡ Press the <U> key to select the
image to be printed.
Press <0>.
s The Print setting screen will appear.
2
Print setting screen
Set the quantity to be printed.
Set the trimming area.
Set the printing style.
Returns to the screen in step 1.
Starts the printing.
The printing style settings are displayed.
<H> is the date icon.
Select [Style].
¡ Press the <V> key to select
[Style], then press <0>.
3
s The Style screen will appear.
131
S Direct Printing with Bubble Jet Direct
Set the options as desired.
4
[Paper]
[Borders]
[Date]
¡ Press the <V> key to select the
desired option, then press <0>.
¡ Press the <V> key to select the
desired setting, then press <0>.
¡ [Paper] is the size of the paper
loaded in the printer.
¡ Check the [Borders] and [Date]
settings and set them if necessary.
¡ When you are done, press the
<7> button to return to the Print
setting screen.
Set the number of copies.
¡ Set as necessary.
¡ Press the <V> key to select
[copies].
5
¡ Press the <U> key to set the
desired quantity.
¡ Set a number from 1 to 99.
Set the trimming.
6
¡ Set as necessary.
¡ For details on trimming, see page
134.
132
S Direct Printing with Bubble Jet Direct
Start printing.
¡ Press the <V> key to select [Print],
then press <0>.
7
s The printing will start.
¡ When the printing ends, the screen
will return to step 1.
¡ To stop the printing, press <0> while
[Stop] is displayed, then select [OK]
and press <0>.
If [Borders] is set, the date might be imprinted on the border, depending on
the printer.
¡ If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
¡ If you select [Stop] during the printing, the printing will stop and the
paper will be discharged.
¡ If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Select [Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
¡ If you are using a BJ printer equipped with an operation display panel,
the error No. will be displayed if an error occurs.To resolve the respective
error, refer to the BJ printer’s instruction manual.
133
Setting the Trimming
You can crop the image and print only the cropped portion as if the
image was recomposed.
Do the trimming right before printing. If you set the trimming and
then set the print settings, you may have to set the trimming again.
Select [Trimming].
1
¡ Press the <V> key to select
[Trimming], then press <0>.
s The trimming screen will appear.
Trim the image.
¡ The image area within the trimming
2
frame will be printed.
¡ The operation guide disappears while
you trim the image. It will reappear
after 5 sec. of idle time.
Changing the trimming frame size
¡ When you press the <u> or <I>
button, the size of the trimming frame
will change. The smaller the trimming
frame, the larger the image
magnification will be.
Moving the trimming frame
¡ Press the <S> keys to move the
trimming frame in the respective
direction. Move the trimming frame
until it shows the desired image area
or composition.
Rotating the frame
¡ The <B> button toggles between
the vertical and horizontal orientation
of the trimming frame. For example, a
horizontal shot can be printed as a
vertical shot.
134
Setting the Trimming
Image area to be printed
Exit the menu.
¡ Press <0>.
s The Print setting screen will reappear.
s On the upper left, you can see the
trimmed image area that will be
printed.
3
¡ Depending on the printer, the trimmed image area might not be printed
as you specified.
¡ The smaller you make the trimming frame, the grainier the picture will
look. If the picture will be too grainy, the trimming frame will turn red.
¡ While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
The trimming frame shape will be different depending on the [Paper
settings], [Image] / [Paper], [Page layout] / [Borders] settings.
135
Easy Printing
When you print directly from your camera to your printer, the printing
settings will be saved in your camera. To use the same settings again,
follow the steps below.
Connect the camera to a printer
and prepare for printing.
1
Playback the images and select
2 the ones to be printed.
Press the <l> button that lights
3 in blue.
s The blue lamp will blink and printing
will start.
¡ With Easy Printing, only one print can be printed each time.
¡ With Easy Printing, any cropping (trimming) will not be applied.
136
9
DPOF: Digital Print
Order Format
With DPOF (Digital Print Order Format), you can use
the camera to specify which images in the CF card are
to be printed and the quantity. This feature is very
convenient when you make prints with a DPOF-
compatible printer or photo lab.
About DPOF
DPOF (Digital Print Order Format) is a standard for recording
print ordering instructions to the CF card. It is for images taken
with a digital camera, and you can specify which photos and
the quantity to print. With a DPOF-compatible digital camera,
you can do the following:
¡ By inserting a CF card into a printer compatible
with DPOF, you can make prints as specified.
¡ Printers capable of direct printing from
the camera can print the images as
specified by DPOF.
¡ When ordering prints from a photo lab,
you do not need to fill in any order form
to specify the image selections,
quantity, etc.
137
3 Print Ordering
Print Settings
Set the print type, date imprinting, and file No. imprinting. The print
settings will be applied to all print-ordered images. (They cannot be set
individually for each image.)
Select [Print order].
1
¡ Select the [x] tab.
¡ Press the <V> key to select [Print
Order], then press <0>.
s The Print Order screen will appear.
Select [Set up].
¡ Press the <U> key to select [Set
2
up], then press <0>.
s The Print setting screen will appear.
Set the options as desired.
3
¡ Set the [Print type], [Date], and [File
No.].
¡ Press the <V> key to select the
desired option, then press <0>.
¡ Press the <V> key to select the
desired setting, then press <0>.
[Print type]
[Date]
[File No.]
138
3 Print Ordering
Standard
Index
Prints one image on one sheet.
K
L
Multiple, thumbnail images are printed on
one sheet.
Print Type
K
L
Both
Prints both the standard and index prints.
On
Date
[On] imprints the recorded date on the print.
Off
On
Off
File No.
[On] imprints the file No. on the print.
Exit the menu.
4
¡ Press the <7> button.
s The Print Order screen will reappear.
¡ Next, select [Order] or [All] to select
the images to be printed.
¡ RAW images cannot be selected for printing.
¡ Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer type.
¡ With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
¡ When printing with DPOF, you must use the CF card whose Print Order
specifications have been set. It will not work if you just extract images
from the CF card and try to print them.
¡ Certain DPOF-compatible printers and photo labs might not be able to
print the photos as you specified. If this happens with your printer, refer
to the printer’s instruction manual. Or check with your photo lab about
compatibility when ordering prints.
¡ Do not insert into the camera a CF card whose print order specifications
have already been set by a different camera and then try to set print
order specifications. The print order may not work or may be overwritten.
Also, depending on the image type, the print order may not be possible.
139
3 Print Ordering
Selecting Individual Images for Printing
Select [Order].
¡ Press the <U> key to select
1
[Order], then press <0>.
s The Order screen will appear.
Select the image to be printed.
¡ Press the <U> key to select the
2
3
image to be printed.
Order the print.
¡ The print order will vary depending on
the [Print Type] setting (p.138).
For [Standard] and [Both]
¡ For standard-type prints, you can set
the quantity (up to 99) for each
image.
¡ Press the <V> key to select the
print quantity.
For [Index]
¡ If you want to include the image in the
index print, checkmark <X> the box.
Otherwise, leave the box unchecked.
¡ Pressing <V> toggles between
checkmarking and uncheckmarking
the box.
¡ If there are other images you want to
select, repeat steps 2 and 3.
¡ You can select up to 998 images.
140
3 Print Ordering
Exit the menu.
¡ Press the <M> button.
s The Print Order screen will reappear.
4
¡ Press the <M> button again to
save the print order to the CF card.
The menu will then reappear.
141
3 Print Ordering
Selecting All Images
The print order can also be set or canceled for all the images in the CF card.
For standard-type prints, a quantity of one will be ordered for all the images.
Note that after following the “Selecting Individual Images” procedure, if
you do the “Selecting All Images” procedure, the print order will change
to “All images.”
Select [All].
¡ Press the <U> key to select [All],
1
then press <0>.
s The All screen will appear.
Select [Mark all].
¡ Press the <V> key to select [Mark
2
all], then press <0>.
s One print each will be specified for all
the images, then the Print Order
screen will reappear.
¡ If you select [Clear all], all the images
selected for printing will be
deselected.
¡ If you select [Cancel], the Print Order
screen will reappear.
Exit the menu.
¡ On the Print Order screen, press the
3
<7> button.
s The settings will be saved to the CF
card, and the menu will reappear.
¡ Note that RAW images cannot be selected for printing even when you set
“Mark all.”
¡
When using a PictBridge printer, print no more than 400 images for one print
order. If you specify more than this, all the selected images might not be printed.
142
3 Direct Printing with DPOF
With a printer compatible with direct printing, you can easily print
images specified with DPOF.
Prepare to print.
¡ See page 121, 122. See “Setting the
1
Camera” and “Connecting the
Camera to the Printer” (steps 1 to 5).
Select [Print order].
2
¡ Select the [x] tab.
¡ Press the <V> key to select [Print
order], then press <0>.
s The Print Order screen will appear.
Select [Print].
¡ Press the <S> key to select [Print],
3
then press <0>.
¡ [Print] will be displayed only if the
camera is connected to the printer
and printing is possible.
s The Print setting screen will appear.
Set the printing options.
4
wPictBridge
ACP Direct
SBubble Jet Direct
wPictBridge
¡ Set the [Paper settings] and <E>
printing effects. (p.124)
143
3 Direct Printing with DPOF
ACP Direct / SBubble Jet Direct
¡ Set the [Style]. (p.128/131)
Start printing.
¡ Press the <V> key to select [OK],
then press <0>.
5
s The printing will start.
¡ To stop the printing, press <0> while
[Stop] is displayed, then select [OK]
and press <0>.
¡ When printing with a PictBridge or Bubble Jet Direct printer, be sure to
set the paper size.
¡ With PictBridge, the file No. cannot be imprinted.
¡ If [Bordered] is set, the date might be imprinted on the border,
depending on the printer.
¡ The date might look light if it is imprinted on a bright background or
border.
¡ With CP Direct, if [Print type] is set to [Index], the number of images
printed on one index sheet will be as follows:
• Credit card size: 20 images
• 10 x 14.8 cm size: 63 images
• 9 x 13 cm size: 42 images
As for the number of index images with Bubble Jet Direct, see the BJ
printer’s instruction manual.
¡ If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and do any of the following:
• Before resuming the printing, you changed the print order settings.
•
Before resuming the printing, you erased an image that was to be printed.
• In the case of index printing with CP Direct, you changed the paper
cassette before resuming the printing.
• In the case of index printing with PictBridge, you changed the paper
settings before resuming the printing.
• When you stopped the printing, the CF card’s remaining capacity was
low.
¡ If there is a printing problem, see page 127 for PictBridge, page 130 for
CP Direct, or page 133 for Bubble Jet Direct.
144
10
Customizing
the Camera
Custom Functions enable you to customize various
camera features to suit your picture-taking preferences.
¡ Custom Functions work only in Creative Zone modes.
145
3 Setting a Custom FunctionN
Select [Custom Functions (C.Fn)].
1
2
3
¡ Select the [b] tab.
¡ Press the <V> key to select
[Custom Functions (C.Fn)], then
press <0>.
s The Custom Function screen will
appear.
Custom Function No.
Select the Custom Function No.
¡ Press the <V> key to select the
Custom Function No., then press
<0>.
Change the setting.
¡ Press the <V> key to select the
desired setting (number), then press
<0>.
¡ Repeat steps 2 and 3 if you want to
set other Custom Functions.
¡ On the bottom of the screen, you can
see the current Custom Function
settings.
Description
Exit the menu.
¡ Press the <M> button to return to
4
the menu.
¡ When you press the shutter button
halfway, the <K> icon will be
displayed on the LCD panel.
146
3 Setting a Custom FunctionN
Resetting All Custom FunctionsN
Select [Clear settings].
1
¡ Select the [b] tab.
¡ Press the <V> key to select [Clear
settings], then press <0>.
Select [Clear all Custom
2 Functions].
¡ Press the <V> key to select [Clear
all Custom Functions], then press
<0>.
Select [OK].
¡ Press the <U> key to select [OK],
3
then press <0>. All the Custom
Functions will then be reset to the
default settings.
147
3 Custom Function SettingsN
C.Fn-1
SET button/Cross keys funct.
You can change the function assigned to the <0> button and <S>
keys for shooting.
0: Normal
1: SET:Quality
When you press <0>, the [z Quality] menu appears so you
can quickly change the setting.
2: SET:Parameter
When you press <0>, the [m Parameters] menu appears so
you can quickly change the setting.
3: SET:Playback
When you press <0>, the images recorded in the CF card will be
played. Assigns the same function as the <x> button.
4: Cross keys:AF frame selec.
At first, you can just use the <S> keys to select an AF point directly
without pressing the < > button. To set automatic AF point selection,
S
press the <S
> button. Also, to select the center AF point, press <0>.
C.Fn-2
Long exposure noise reduction
0: Off
1: On
Reduces noise in bulb exposures 30 sec. or longer at ISO 100 -
800 or 1 sec. or longer at ISO 1600. After the picture is taken, the
time required for noise-reduction processing will be the same as
the exposure time. During the noise reduction processing, “buSY”
will be displayed and shooting will not be possible.
C.Fn-3
Flash sync. speed in Av mode
0: Auto
1: 1/200sec. (fixed)
Sets the flash sync speed to 1/200 sec. in the aperture-priority AE
(Av) mode. (Against dark backgrounds such as the night sky, the
subject’s background will look dark.)
148
3 Custom Function SettingsN
C.Fn-4
Shutter button/AE lock button
0: AF/AE lock
1: AE lock/AF
Convenient when you want to focus and meter separately. Press the <
A>
button to autofocus and press the shutter button halfway to attain AE lock.
2: AF/AF lock, no AE lock
In the AI Servo AF mode, you can press the <A> button to stop the AF operation
momentarily. This prevents the AF from being thrown off by any obstacle passing
between the camera and subject. The exposure is set at the moment the picture is taken.
3: AE/AF, no AE lock
This is useful for subjects which keep moving and stopping repeatedly. In the AI
Servo AF mode, you can press the <A> button to start or stop the AI Servo AF
operation. The exposure is set at the moment the picture is taken. Thus, the optimum
focusing and exposure will always be attained as you wait for the decisive moment.
C.Fn-5
AF-assist beam
You can enable or disable the camera’s AF-assist beam or have it
emitted by the EOS-dedicated Speedlite instead.
0: Emits
1: Does not emit
The AF-assist beam is not emitted at all regardless of the shooting conditions .
2: Only emits ext. flash
With an EOS-dedicated Speedlite, it will emit the AF-assist beam
when necessary. The camera’s built-in flash will not emit the AF-
assist beam regardless of the shooting conditions.
C.Fn-6
Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, etc.
The exposure level will be displayed in the viewfinder and on the LCD panel as shown below.
149
3 Custom Function SettingsN
C.Fn-7
Mirror lockup
0: Disable
1: Enable
Effective for close-up and telephotos shots to prevent camera
shake caused by the mirror’s reflex action. For more on mirror
lockup, see page 94.
C.Fn-8
E-TTL II
0: Evaluative
Fully automatic flash photography under all conditions, from low
light to daylight fill-flash.
1: Average
The flash exposure is averaged for the entire area covered by the
flash. Since the camera will not execute automatic exposure
compensation, adjust the flash exposure compensation if
necessary. This also applies if you use FE lock.
C.Fn-9
Shutter curtain sync.
0: 1st-curtain sync.
1: 2nd-curtain sync.
When a slow shutter speed is set, you can capture a light trail
following the subject.The flash fires right before the shutter closes.
This Custom Function can be used to obtain 2nd-curtain sync
effects even with EX-series Speedlites which do not provide 2nd-
curtain sync. If the EX-series Speedlite has this feature, it will
override this Custom Function.
When 2nd-curtain sync is used, a preflash will be fired for flash metering
control right after you press the shutter button completely. Remember that
the main flash will fire right before the shutter closes.
150
11
Reference
This section will help you understand your camera
better. It covers information on camera features, system
accessories, and other reference information.
151
Function Availability Table
o: Set automatically k: User selectable
Basic Zone
Creative Zone
Mode Dial
1
2
3
4
5
6
7
d
k
k
k
s
k
f
k
a
k
k
k
8
k
JPEG
k
k
k
k
k
k
k
RAW
k
k
k
RAW + 7L
Auto
k
k
k
o
o
o
o
o
o
o
o
o
o
o
o
o
o
Manual
Auto WB
k
k
k
k
k
k
k
k
k
k
Preset WB, Custom WB,
WB correction,
WB bracketing
k
k
k
k
k
Parameters
o (Parameter 1)
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
o
–
One-Shot
AI Servo
o
o
o
o
o
o
o
AF AI Focus
o
o
o
o
–
AF
Auto
o
o
o
o
o
o
o
o
o
point
Manual
selection
Evaluative
Partial
o
o
k
k
k
Center-weighted average
Program shift
Exposure compensation
AEB
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
AE lock
Depth-of-field preview
Single
k
k
k
o
o
o
o
o
o
o
o
o
o
Continuous
Auto
o
o
o
o
Manual
k
k
k
k
k
Flash off
Red-eye reduction
FE lock
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Flash exposure compensation
Custom Functions/Clearing
All Custom Functions
Camera setting reset
Image sensor cleaning
152
Function Availability Table
AF Modes and Drive Modes
AF mode
Drive mode
One-Shot AF
AI Focus AF
AI Servo AF
The picture cannot be taken Automatically
until focus is achieved. switches from
The focusing tracks
the subject
When focus is achieved, it One-Shot AF to movement. The
is locked. With evaluative
metering, the exposure
setting is also locked. (The starts moving.
exposure setting is stored in
memory before the shot is
taken.)
AI Servo AF if
the subject
exposure is set at the
moment the picture is
taken.
uSingle
shooting
The above conditions apply
during continuous shooting.
During continuous shooting
(max. 3 shots/sec.),
The above conditions apply
during continuous shooting.
During continuous shooting
(max. 3 shots/sec.),
iContinuous
shooting
focusing is not executed.
focusing is executed.
AE Lock
(In Creative Zone modes)
AF point selection
Metering mode
Automatic AF point selection
Manual AF point selection
q Evaluative
Metering*
AE lock is applied at the AF
point that achieved focus.
AE lock is applied at the
selected AF point.
w Partial Metering
AE lock is applied at the center AF point.
e Center-weighted
Average Metering
* When the lens’ focus mode switch is set to <MF>, AE lock is applied at the center AF
point.
Image Conversion Factor
Since the image area is
smaller than the 35mm film
format, it will look like the
Image size
22.2 x 14.8mm (0.87 x 0.58 in)
lens focal length is increased
by 1.6x.
35mm image size
36 x 24mm (1.42 x 0.95 in)
153
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Power Source
The battery cannot be recharged.
¡ You are using the wrong battery.
s Use Battery Pack NB-2LH.
¡
The battery pack is not properly attached to the battery charger.
s Attach the battery pack properly to the charger. (p.20)
The camera does not operate even when the power switch is set to <
1>.
¡ The battery is exhausted.
s Recharge the battery pack. (p.20)
¡ The battery is not installed properly.
s Install the battery properly. (p.22)
¡ Battery compartment cover is not closed.
s Close the battery compartment cover securely. (p.22)
¡ CF card slot cover is not closed.
s
Close the CF card slot cover securely. (p.26)
The access lamp still blinks even when the power switch is set to <
2
>.
¡ If you set the power switch to <2> right after shooting, the
access lamp will still light/blink for a few seconds until the
camera finishes recording the image onto the CF card.
s When the camera finishes recording the image to the CF card, the
access lamp will stop blinking and the power will turn off
automatically.
The battery becomes exhausted quickly.
¡ The battery is not fully charged.
s Recharge the battery fully. (p.20)
¡ The battery’s service life has expired.
s Replace the battery pack with a new one.
154
Troubleshooting Guide
The camera turns off by itself.
¡ Auto power off is in effect.
s Press the shutter button halfway.If you do not want auto power off
to take effect, set [c Auto power off] on the menu to [Off].
Only the <c> icon blinks on the top LCD panel.
¡ The battery is almost exhausted.
s Recharge the battery pack. (p.20)
Shooting
No images can be shot nor recorded.
¡ The CF card is not properly inserted.
s Insert the CF card properly. (p.26)
¡ The CF card is full.
s Use a new CF card or erase unnecessary images. (p.26, 116)
¡ The battery is exhausted.
s Recharge the battery pack. (p.20)
¡ You did not focus perfectly. (The focus confirmation light
<o> in the viewfinder blinks.)
s Press the shutter button halfway again and focus the subject. If
you still cannot focus properly, focus manually. (p.28, 76)
The LCD monitor does not display a clear image.
¡ The LCD monitor screen is dirty.
s Use a soft, lens cloth to clean the screen.
¡ The LCD’s service life has expired.
s Consult your nearest customer service center or dealer.
155
Troubleshooting Guide
The image is out of focus.
¡ The lens focus mode switch is set to <MF>.
s Set the lens focus mode switch to <AF>. (p.25)
¡ Camera shake occured when you pressed the shutter button.
s To prevent camera shake, hold the camera still and press the
shutter button gently. (p.28, 42)
The CF card cannot be used.
¡ [Err **] is displayed on the LCD panel.
s If it is [Err CF], see page 118.
s If it is [Err 02], see page 157.
¡ You are using a non-Canon CF card.
s Using Canon CF cards is recommended. (p.159)
Image Review & Operation
The image cannot be erased.
¡ The image is erase-protected.
s Cancel the protection. (p.115)
The wrong shooting date and time is displayed.
¡ The correct date and time has not been set.
s Set the correct date and time. (p.37)
No image appears on the TV screen.
¡ Video cable plugs are not inserted all the way.
s Insert the video cable plugs all the way in. (p.114)
¡ The correct video format (NTSC or PAL) has not been set.
s Set the camera to the correct video format matching the TV set.
(p.34)
¡ You are not using the video cable that came with the camera.
s Use the video cable that came with the camera. (p.114)
156
Troubleshooting Guide
Direct Printing
The images cannot be printed.
¡ The camera is not properly connected to the printer.
s Use the specified cable to properly connect the camera to the
printer. (p.122)
¡ The printer is not turned on.
s Turn on the printer.
Error Codes
If a camera error occurs, “Err xx” will be displayed on the LCD panel.
Follow the countermeasures below to resolve the problem for
respective error code.
If the same error occurs often, something is probably wrong with the
camera. Jot down the “xx” error code and contact your nearest Canon
Service Center.
If an error code appears after you take the picture, the camera might
have missed the shot. Press the <x> button to see if the image
appears on the LCD monitor.
Error Code
Err 01
Countermeasures
Communications between the camera and lens is faulty.
Clean the lens contacts. (p.9)
There is a problem with the CF card. Try any of the following:
Remove and re-insert the CF card. Format the CF card. Use a
different CF card.
Err 02
Err 04
Err 05
The CF card is full. Erase unnecessary images in the card or
replace the CF card.
Something obstructed the built-in flash’s automatic pop-up
operation.
Turn the power switch to <2> and <1> again.
An error other than the above has occurred.
Remove and re-install the battery.
This error may occur if you use a non-Canon lens and the
camera or lens does not operate properly as a result.
Err 99
157
Major Accessories (Optional)
Battery Pack NB-2LH
Compact, high-capacity, lithium-ion, secondary power
pack.
AC Adapter Kit ACK-DC20
Power source kit (AC adapter, DC coupler, power cord)
for supplying power to the camera from a household
power outlet. Compatible with 100 - 240 V AC.
Battery Grip BG-E3
This accommodates two NB-2LH packs or six size-AA
batteries. It provides a vertical-grip shutter button,
electronic dial, AE lock/FE lock button, AF point selection
button, and exposure compensation/aperture setting
button.
Semi-Hard Case EH18-L
Dedicated case to protect the camera.
It can accommodate the camera attached with the EF-
S18-55mm f/3.5-5.6 ll lens.
Shoe-mount Speedlites
An EX-series Speedlite can be attached to the camera’s
hot shoe.You can use E-TTL II autoflash to obtain flash
exposures as easy as normal shooting without flash.
Macro Lites
The EX-series Macro Lites (two models) are ideal for
close-up flash photography. You can fire only one or both
flash tubes and control the flash ratio to easily obtain
sophisticated lighting effects with E-TTL II autoflash.
158
Major Accessories (Optional)
Remote Controller RC-1 and RC-5
Remote control transmitter that enables you to shoot from
5 m (16.4 ft.) away from the camera. The RC-1 can trip
the shutter immediately or after a 2-sec. delay, and the
RC-5 trips the shutter after a 2-sec. delay.
RC-1
RC-5
Remote Switch RS-60E3
Remote switch to prevent camera shake during super-
telephoto shots, close-ups, and bulb exposures.The cord
is 60cm/2.0 ft. The switch provides the same effect as
pressing the shutter button halfway or completely. A
shutter-release lock is also provided.
E-series Dioptric Adjustment Lenses
One of ten E-series dioptric adjustment lenses (-4 to +3
diopters) can be attached to the camera’s eyepiece to
further expand the dioptric adjustment range.
CF card
Data storage media where the captured images are
recorded.
CF cards made by Canon are recommended.
PC card adapter
Enables a CF card to be inserted into a PC card slot or
PC card reader.
159
System Map
Eyepiece Extender
EP-EX15
Macro Ring Lite Macro Twin Lite
ST-E2 220EX 430EX 580EX
Rubber Frame Ef
MR-14EX
MT-24EX
E-series Dioptric
Adjustment Lenses
* The Lens Kit includes
the EF-S 18-55mm lens.
Bundled
Accessories
Eyecup Ef
Wide Strap
EW-100DBll
Angle Finder C
Date / time
CR2016
lithium battery
Semi-hard Case
EH18-L
Battery Pack
NB-2LH
AC Adapter Kit
ACK-DC20
Battery Grip
BG-E3
Battery Charger
CB-2LW or CB-2LWE
DC Coupler
DR-700
Car Battery Adapter
CBC-NB2
Compact Power
Adapter
CA-PS700
Battery Magazine
BGM-E3L for two
NB-2LH battery packs
Battery Magazine
BGM-E3A for
size-AA batteries
160
System Map
CF card
CF Card reader
PC card adapter
Personal computer
Windows XP
(Home Edition / Professional)
Windows 2000 Professional
Windows ME
Windows 98 Second Edition
Mac OS X
PC card slot
USB port
(2.0/1.1)
• EOS DIGITAL Solution Disk
• ArcSoft PhotoStudio Disk
•
Software Instruction Manual (PDF)
Interface Cable
IFC-400PCU
PictBridge-compatible printer
Video Cable
VC-100
CP Printer
Bubble Jet Direct-
compatible printer
Remote Switch
RS-60E3
EF-S
lenses
Remote
Controller
RC-5
Remote
Controller
RC-1
EF lenses
TV/Video
161
Specifications
• Type
Type:
Digital, single-lens reflex, AF/AE camera with built-in
flash
Recording media:
CF card (Type I or II) *Compatible with Microdrive and
2GB and larger CF cards
Image size:
22.2 x 14.8mm
Compatible lenses:
Canon EF lenses (including EF-S lenses)
(35mm-equivalent focal length is equal to approx.1.6
times the marked focal length)
Canon EF mount
Lens mount:
• Imaging Element
Type:
High-sensitivity, high-resolution, large single-plate CMOS
sensor
Pixels:
Effective pixels: Approx. 8.00 megapixels
Total pixels: Approx. 8.20 megapixels
3:2
Aspect ratio:
Color filter system:
Low-pass filter:
RGB primary color filter
Located in front of the image sensor, non-removable
• Recording System
Recording format:
Image type:
Design rule for Camera File System 2.0
JPEG, RAW (12bit)
RAW+JPEG
simultaneous recording: Possible
File size:
(1) Large/Fine:
Approx. 3.3 MB (3456 x 2304 pixels)
(2) Large/Normal: Approx. 1.7 MB (3456 x 2304 pixels)
(3) Medium/Fine: Approx. 2.0 MB (2496 x 1664 pixels)
(4) Medium/Normal: Approx. 1.0 MB (2496 x 1664 pixels)
(5) Small/Fine:
(6) Small/Normal: Approx. 0.6 MB (1728 x 1152 pixels)
(7) RAW: Approx. 8.3 MB (3456 x 2304 pixels)
Approx. 1.2 MB (1728 x 1152 pixels)
* Exact file sizes depend on the subject, ISO speed,
processing parameters, etc.
File numbering:
Color space:
Consecutive numbering or auto reset
sRGB or Adobe RGB
Processing parameters: Parameter 1 and 2, set 1 to 3 (three custom parameter
sets), B/W
Interface:
USB 2.0 Hi-Speed (Print/PTP, PC connection selectable)
Video output (NTSC/PAL)
162
Specifications
• White Balance
Type:
Auto, daylight, shade, cloudy, tungsten light, white
fluorescent light, flash, custom
Auto white balance:
Auto white balance with the imaging sensor
Color temperature correction: White balance correction:
9 stops in full-stop increments
White balance bracketing:
3 stops in full-stop increments
* Blue/amber bias or magenta/green bias possible
Color temperature
information transmission: Provided
• Viewfinder
Type:
Eye-level pentamirror
Coverage:
Magnification:
Eyepoint:
Vertical/Horizontal 95%
0.8x (-1 diopter with 50mm lens at infinity)
21 mm
Built-in dioptric adjustment:-3.0 - +1.0 diopter
Focusing screen:
Mirror:
Fixed, precision matte
Quick-return half mirror
(Transmission:reflection ratio of 40:60, no mirror cut-off
with EF600mm f/4 or shorter lenses)
Viewfinder information: AF information (AF points, focus confirmation light),
exposure information (shutter speed, aperture value, AE
lock, exposure level, AEB in progress, exposure
warning), flash information (flash ready, red-eye
reduction enabled, red-eye reduction lamp on, high-
speed sync, FE lock, flash exposure compensation),
maximum burst, CF card information
Depth-of-field preview: Enabled with depth-of-field preview button
• Autofocus
Type:
TTL-CT-SIR with a CMOS sensor
(TTL secondary image registration, phase detection)
7 AF points
AF points:
Metering range:
Focus modes:
EV 0.5 - 18 (at 20°C/68°F, ISO 100)
One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing
(MF)
AF point selection:
Auto or manual
Selected AF point indicator:Superimposed in viewfinder and indicated on LCD panel
163
Specifications
AF-assist beam:
Small series of flashes fired by built-in flash
Effective range: Approx. 4.0m/13.1ft. at center, approx.
3.5m/11.5ft. at periphery
• Exposure Control
Metering modes:
35-zone TTL full aperture metering
• Evaluative metering (linkable to any AF point)
• Partial metering (approx. 9% of viewfinder at center)
• Center-weighted average metering
Metering range:
Exposure control:
EV 1 - 20 (at 20°C/68°F with 50mm f/1.4 lens, ISO 100)
Program AE (Full Auto, Portrait, Landscape, Close-up,
Sports, Night Portrait, Flash Off, Program), shutter-
priority AE, aperture-priority AE, depth-of-field AE,
manual exposure, E-TTL II autoflash
ISO speed:
Basic Zone modes: Automatically set (ISO 100 - 400)
Equivalent to ISO 100, 200, 400, 800, 1600
Exposure compensation:Manual: 2 stops in 1/3- or 1/2-stop increments (can be
combined with AEB)
AEB: 2 stops in 1/3- or 1/2-stop increments
AE lock:
Auto: Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual: By AE lock button in all metering modes
• Shutter
Type:
Shutter speeds:
Electronically-controlled, focal-plane shutter
1/4000 to 30 sec. (1/3- and 1/2-stop increments), bulb,
X-sync at 1/200 sec.
Shutter release:
Self-timer:
Soft-touch electromagnetic release
10-sec. delay
Remote control:
Remote Switch RS-60E3
Remote Controller RC-5/RC-1
• Built-in Flash
Type:
Flash metering:
Guide No.:
Retractable, auto pop-up flash
E-TTL II autoflash
13/43 (ISO 100, in meters/feet)
Approx. 3 sec.
Recycle time:
Flash-ready indicator: Flash-ready icon lights in viewfinder
Flash coverage:
FE lock:
17mm lens angle of view
Provided
Flash exposure compensation: 2 stops in 1/3- or 1/2-stop increments
164
Specifications
• External Speedlite
EOS-dedicated Speedlite: E-TTL II autoflash with EX-series Speedlite
Zooming to match
lens focal length:
Provided
• Drive System
Drive modes:
Continuous:
Single, continuous, and self-timer/remote control
Max. 3 shots per sec.
Max. burst:
JPEG (Large/Fine): Approx. 14 shots
RAW: Approx. 5 shots, RAW+JPEG (Large/Fine):
Approx. 4 shots
* With a Canon 512MB CF card.
* Varies depending on the subject, ISO speed,
processing parameters, CF card, etc.
• LCD Monitor
Type:
Monitor size:
Pixels:
TFT color liquid-crystal monitor
1.8 in.
Approx. 115,000
Coverage:
100% with respect to the effective pixels
Brightness adjustment: Five levels provided
(Gray level chart displayed during adjustment)
15
Interface languages:
• Image Playback
Display format:
Single image (with or without info), shooting information,
9-image index, magnified view (Approx. 1.5x - 10x),
autoplay, image rotation, and jump (by 10/100 images or
date)
Highlight warning:
In the shooting information mode, any overexposed
highlight areas with no image infomation will blink.
• Image Protection and Erase
Protect:
Single images can be erase-protected or not.
Erase:
One image or all images in the CF card can be erased
(except protected images).
• Direct Printing
Compatible printers:
CP Direct, Bubble Jet Direct, and PictBridge-compatible
printers
Printable images:
Easy Print feature:
JPEG images (DPOF printing possible)
Provided
165
Specifications
• DPOF: Digital Print Order Format
DPOF:
Version 1.1 compatible
• Customization
Custom Functions:
9 Custom Functions with 24 settings
• Power Source
Battery:
Battery Pack NB-2LH, quantity 1
* AC Adapter Kit ACK-DC20 enables a household AC
outlet to supply power.
* Battery Grip BG-E3 enables size-AA batteries to supply
power.
Battery life:
[shots]
Shooting Conditions
Temperature
No Flash
Approx. 600
Approx. 450
50% Flash Use
Approx. 400
Approx. 350
At 20°C / 68°F
At 0°C / 32°F
* The above figures apply when a fully-charged Battery
Pack NB-2LH is used.
* The figures above are based on CIPA (Camera &
Imaging Products Association) testing standards.
Automatic
Provided. Power turns off after 1, 2, 4, 8, 15, or 30 min.
CR2016 lithium battery, quantity 1
Battery check:
Power saving:
Date/Time battery:
• Dimensions and Weight
Dimensions (W x H x D): 126.5 x 94.2 x 64 mm / 5.0 x 3.7 x 2.5 in.
Weight:
485 g / 17.1 oz. (body only)
• Operation Environment
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
166
Specifications
• Battery Charger CB-2LW
Compatible battery:
Recharging time:
Rated input:
Battery Pack NB-2LH
Approx. 90 min.
100 - 240 V AC, 50/60 Hz
8.4 V DC, 0.55 A
Rated output:
Working temperature range: 0°C - 40°C / 32°F - 104°F
Dimensions (W x H x D): 91 x 56 x 22.5 mm / 3.6 x 2.2 x 0.9 in
Weight:
Approx. 68 g / 2.4 oz
• Battery Charger CB-2LWE
Compatible battery:
Recharging time:
Rated input:
Battery Pack NB-2LH
Approx. 90 min.
100 - 240 V AC, 50/60 Hz
8.4 V DC, 0.55 A
Rated output:
Working temperature range: 0°C - 40°C / 32°F - 104°F
Dimensions (W x H x D): 91 x 56 x 22.5 mm / 3.6 x 2.2 x 0.9 in
Weight:
Approx. 61 g / 2.2 oz (without power cord)
¡ All the specifications above are based on Canon’s testing standards.
¡ The camera’s specifications and physical appearance are subject to change
without notice.
167
Digital Camera Model DS126071 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:This equipment has been tested and found to comply with the limits
for class B digital devices, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—
Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be
used with this equipment in order to comply with Class B limits in Subpart
B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless
otherwise specified in the manual. If such changes or modifications
should be made, you could be required to stop operation of the
equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
168
Index
Camera setting display................... 68
Center-weighted average metering... 77
CF card....................... 9, 26, 118, 159
Clear all camera settings................ 35
Clear all Custom Functions .......... 147
Clear settings ................................. 34
Close-up......................................... 46
Color saturation.............................. 64
Color space .................................... 62
Color tone....................................... 64
Communication ............................ 121
Compression rate........................... 52
Continuous ..................................... 67
Continuous shooting....................... 78
Contrast.......................................... 64
CP Direct...................................... 128
Creative Zone modes ..................... 16
Cross keys................................ 18, 30
Custom Functions ........................ 148
Custom white balance.................... 57
A
AC Adapter Kit ........................24, 158
Access lamp....................................27
Accessories ..................................158
A-DEP.............................................88
Adobe RGB.....................................62
AE ...................................................80
AE lock....................................92, 153
AEB.................................................90
AF assist beam ...............................74
AF mode .........................................70
AF point...........................................73
AI Focus AF ....................................72
AI Servo AF.....................................71
Aperture..........................................84
Attaching the Strap .........................19
Auto play .......................................112
Auto playback................................112
Auto power off...........................28, 41
Auto reset........................................67
Auto rotate ....................................105
Automatic AF point selection ..........73
Av....................................................84
D
DC coupler ..................................... 24
Depth-of-field preview..................... 85
Dioptric adjustment......................... 42
Direct printing ....................... 119, 143
DPOF ........................................... 137
Drive mode..................................... 78
B
B/W .................................................65
Basic Zone modes ..........................16
Battery ..............................20, 22, 158
Battery Charger ..............................17
Battery check..................................22
Battery life.......................................23
Beeper ............................................50
Bubble Jet Direct...........................131
Built-in flash ....................................96
Bulb exposures ...............................93
Bundled Items...................................3
E
Easy Printing ................................ 136
Erase............................................ 116
Erasing a single image................. 116
Erasing all images........................ 117
Error Codes.................................. 157
E-TTL II autoflash........... 96, 101, 150
Evaluative metering........................ 77
Exposure compensation................. 89
Exposure level increments ........... 149
C
C.Fn ..............................................148
169
Index
EX-series Speedlite ......................101
Extension..................................52, 68
External flash................................101
Eyepiece cover ...............................19
ISO speed ...................................... 55
J
JPEG.............................................. 52
Jump by 10 images/100 images... 111
Jump by date................................ 111
Jump display ................................ 111
F
FE lock....................................99, 101
FEB...............................................101
File numbering................................67
Filter Effects....................................66
Firmware.........................................34
Flash...............................96, 101, 102
Flash exposure compensation ...100, 101
Flash off..........................................47
Flash sync speed..........................148
Focus confirmation light..................15
Focus lock.......................................75
Focus mode switch ...................70, 76
Folder..............................................67
Format ..........................................118
FP flash.........................................101
Full Auto..........................................44
Function Availability Table.............152
L
Landscape...................................... 46
Language ....................................... 36
LCD brightness ............................ 106
LCD monitor............................... 9, 34
LCD panel .................................. 9, 14
LCD panel illumination ................. 102
Lens ........................................... 9, 25
M
M (Manual)..................................... 86
Magnified view.............................. 110
Main Dial .................................. 18, 29
Manual AF point selection.............. 73
Manual Focusing............................ 76
Max. Burst ...................................... 54
Menus ................................ 31, 33, 34
Metering mode ............................... 77
MF.................................................. 76
Mirror lockup................................... 94
Mode Dial....................................... 16
Monochrome .................................. 65
H
Highlight alert................................108
High-speed sync...........................101
Histogram .....................................108
Holding the Camera........................42
I
N
Image processing ...........................53
Image review time.........................104
Image size ....................................153
Image Zone.....................................16
Image-recording quality ..................52
Index.............................................139
Index display.................................109
INFO. ......................................68, 107
Interface cable ..................................3
Night Portrait .................................. 47
Noise reduction ............................ 148
Nomenclature................................. 12
Non-Canon flash units.................. 102
NTSC ..................................... 34, 114
Number of copies... 126, 129, 132, 140
O
One-Shot AF .................................. 71
170
Index
Shoot w/o card ............................... 41
Shooting information display ........ 108
Shooting menu ......................... 31, 33
Shooting mode ............................... 16
Shutter button................................. 28
Shutter curtain synchronization.... 150
Shutter speed................................. 82
Single image display..................... 107
Single shooting............................... 78
Specifications ............................... 162
Sports............................................. 47
sRGB.............................................. 62
Standard....................................... 139
Style ..................................... 128, 131
System Map ................................. 160
P
P (Program) ....................................80
PAL..........................................34, 114
Paper settings...............................124
Partial metering...............................77
PC connection...............................121
PictBridge .....................................124
Playback........................................107
Playback menu..........................31, 33
Portrait ............................................46
Possible shots.................................53
Power outlet ....................................24
Power Switch ..................................28
Pressing completely........................28
Pressing halfway.............................28
Print Order ....................................137
Print/PTP ......................................121
Processing parameters.............63, 64
Program AE ....................................80
Program shift...................................81
Protect...........................................115
PTP...............................................121
T
Timer .............................................. 18
Toning effect ................................... 66
Trimming....................................... 134
Tv ................................................... 82
V
Video cable................................... 114
Video OUT.................................... 114
Viewfinder....................................... 15
R
RAW................................................53
RAW+JPEG ....................................52
Recharge ........................................20
Red-eye reduction...........................98
Remote control........................49, 159
Replacing the date/time battery......38
Rotate ...........................................113
W
WB-BKT ......................................... 60
White balance................................. 56
White balance bracketing ............... 60
White balance correction................ 59
Wireless remote control.......... 49, 159
Wireless, multi-Speedlite system ... 101
S
Selecting all images......................142
Selecting Individual Images ..........140
Self-timer...................................48, 78
Sensor cleaning ..............................39
Setting the date/time.......................37
Set-up menu .............................31, 34
Sharpness.......................................64
171
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
For all inquiries concerning this camera, call toll free in the U.S.
1-800-OK-CANON or write to: Customer Relations, Canon U.S.A., Inc.
One Canon Plaza, Lake Success, N.Y. 11042-1198
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada1010
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this camera, call toll free in Canada
1-800-OK-CANON
EUROPE,
CANON EUROPA N.V.
AFRICA &
MIDDLE EAST
Bovenkerkerweg 59-61, P.O. Box 2262, 1180 EG Amstelveen, The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.
102, Avenue du Général de Gaulle 92257 La Garenne-Colombes Cedex, France
CANON UK LTD.
Woodhatch Reigate Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8 I-20097 San Donato Milanese, Milano, Italy
CANON Schweiz AG
Geschäftsbereich Wiederverkauf, Industriestrasse 12, CH-8305 Dietlikon, Switzerland
CANON G. m. b. H.
Oberlaaerstrasse 233, 4th floor, 1100 Wien, Austria
CANON España, S. A.
C/Joaquín Costa, 41, 28002 Madrid, Spain
SEQUE Soc. Nac. de Equip., Lda.,
Praça da Alegria, 58, 2°, 1269-149 Lisboa, Portugal
CENTRAL &
CANON LATIN AMERICA, INC. DEPTO DE VENTAS
SOUTH AMERICA 703 Waterford Way Suite 400 Miami, FL 33126 U.S.A.
CANON LATIN AMERICA, INC. CENTRO DE SERVICIOY REPARACION
Apartado 2019, Zona Libre de Colón, República de Panamá
ASIA
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01 Keppel Bay Tower Singapore 098632
OCEANIA
JAPAN
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON SALES CO., INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
This Instruction Manual booklet is current as of January 2005. For information on
the camera’s compatibility with any accessories and lenses introduced after this
date, contact any Canon Service Center.
CT1-1287-001
© CANON INC. 2005
PRINTED IN JAPAN
|
