PUEB.DnIMg-l6i7s0h
English
Français
Español
Digital Video Camcorder
Instruction Manual
Camescope numérique
Manuel d’instruction
Videocámara digital
Manual de Instrucciones
Digital
Video
Cassette
Mini
PUB.DIM-665
Please read also the following instruction manual.
Veuillez lire aussi le manuel d'instruction suivant.
Lea también el manual de instrucciones siguiente.
Digital Video Software
E
F
Version 15 / Version 16
Instruction Manual
Manuel d’instruction
Manual de Instrucciones
Es
• Digital Video Software
This instruction manual explains how to install the software, connect the camcorder to
a
computer, and download images from memory card to computer. For more detailed
a
a
operational instructions, refer to the PDF format manual provided on the DIGITAL VIDEO
SOLUTION DISK.
Ce manuel d’instruction explique comment installer le logiciel, connecter le camescope
l’ordinateur et telecharger des images partir d’une carte memoire sur un ordinateur.
a
a
Pour des instructions de fonctionnement plus detaillees, reportez-vous au manuel au
format PDF fournie sur le disque DIGITAL VIDEO SOLUTION DISK.
En este manual de instrucciones se explica como instalar el software, conectar la
un
videocamara
a
un ordenador,
y
descargar imagenes de una tarjeta de memoria
a
ordenador. Si desea instrucciones mas detalladas sobre el funcionamiento, consulte el
manual de formato PDF suministrado con el disco DIGITAL VIDEO SOLUTION DISK.
NTSC
IMPORTANT SAFETY INSTRUCTIONS
In these safety instructions the word “product”
refers to the Canon Digital Video Camcorder
ELURA90/ELURA85/ELURA80 A and all its
accessories.
10. Power Sources — The CA-570 Compact
Power Adapter should be operated only
from the type of power source indicated
on the marking label. If you are not sure of
the type of power supply to your home,
consult your product dealer or local power
company. Regarding other power sources
such as battery power, refer to instructions
in this manual.
E
1. Read Instructions — All the safety and
operating instructions should be read
before the product is operated.
2. Retain Instructions — The safety and
operating instructions should be retained
for future reference.
11. Polarization — The CA-570 Compact
Power Adapter is equipped with a
polarized 2-prong plug (a plug having one
blade wider than the other).
The 2-prong polarized plug will fit into the
power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug still fails to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the
polarized plug.
3. Heed Warnings — All warnings on the
product and in the operating instructions
should be adhered to.
4. Follow Instructions — All operating and
maintenance instructions should be
followed.
5. Cleaning — Unplug this product from the
wall outlet before cleaning. Do not use
liquid or aerosol cleaners. The product
should be cleaned only as recommended
in this manual.
12. Power Cord Protection — Power cords
should be routed so that they are not likely
to be walked on or pinched by items
placed upon or against them. Pay
6. Accessories — Do not use accessories
not recommended in this manual as they
may be hazardous.
particular attention to plugs and the point
from which the cords exit the product.
7. Avoid magnetic or electric fields — Do not
use the camera close to TV transmitters,
portable communication devices or other
sources of electric or magnetic radiation.
They may cause picture interference, or
permanently damage the camera.
13. Outdoor Antenna Grounding — If an
outside antenna is connected to the
product, be sure the antenna is grounded
so as to provide some protection against
voltage surges and built-up static charges.
Section 810 of the National Electrical
Code, ANSI / NFPA No. 70—1984,
8. Water and Moisture — Hazard of electric
shock — Do not use this product near
water or in rainy/moist situations.
provides information with respect to
proper grounding of the mast and
supporting structure, grounding of the
lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes, and requirements
for the grounding electrode. See figure 1.
9. Placing or Moving — Do not place on an
unstable cart, stand, tripod, bracket or
table. The product may fall, causing
serious injury to a child or
adult, and serious damage
to the product.
A product and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the product and cart
combination to overturn.
3
18.Damage Requiring Service — Disconnect
this product from the wall outlet and all
power sources including battery, and refer
servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is
damaged.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Fig. 1
ANTENNA LEAD
IN WIRE
GROUND
LAMP
ANTENNA DISCHARGE
UNIT
(NEC SECTION 810-20)
b. If any liquid has been spilled onto, or
objects have fallen into, the product.
c. If the product has been exposed to rain
or water.
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE
SYSTEM
d. If the product does not operate
normally even if you follow the
operating instructions. Adjust only
those controls that are covered by the
operation instructions. Improper
adjustment of other controls may result
in damage and will often require
extensive work by a qualified technician
to restore the product to its normal
operation.
(NEC ART 250 PART H)
NEC - NATIONAL ELECTRICAL CODE
14.Lightning — For added protection of this
product during a lightning storm, or when it
is left unattended and unused for long
periods of time, disconnect it from the wall
outlet and disconnect the antenna. This
will prevent damage to the product due to
lightning and power-line surges.
e. If the product has been dropped or the
cabinet has been damaged.
f. When the product exhibits a distinct
change in performance. This indicates
a need for service.
15.Overloading — Do not overload wall
outlets and extension cords as this can
result in a risk of fire or electric shock.
16.Objects and Liquid Entry — Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result in a fire or electric shock.
Be careful not to spill liquid of any kind
onto the product.
19.Replacement Parts — When replacement
parts are required, be sure the service
technician has used replacement parts
that are specified by Canon or that have
the same characteristics as the original
part. Unauthorized substitutions may result
in fire, electric shock or other hazards.
17.Servicing — Do not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all
20.Safety Check — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety
checks to determine that the product is in
safe operating order.
servicing to qualified service personnel.
When replacement of power supply is required, please return it to the responsible
nearest Canon Service Center and please replace it with the same type number
CA-570.
The Adapter can be used with a power supply between 100 and 240 V AC. For areas
where 120 V AC power is not used, you will need a special plug adapter. Contact your
nearest Canon Service Center for further information.
Use only CSA/UL Certified power supply cord set, Polarized, Type SPT-2 or heavier,
minimum No. 18 AWG copper, rated 125 or 250 V, minimum ,P A, minimum 6 ft (1.8 m),
maximum 10 ft (3 m) long.
This Class B digital apparatus complies with Canadian ICES-003.
4
Using this Manual
Thank you for purchasing the Canon ELURA90/ELURA85/ELURA80. Please read this
manual carefully before you use the camcorder and retain it for future reference.
E
Change the display language before you begin ( 76).
Symbols and References Used in This Manual
: Precautions related to the camcorder operation.
: Additional topics that complement the basic operating procedures.
: Reference page number.
Capital letters are used to refer to buttons on the camcorder or the wireless controller.
[ ] are used to refer to menu items displayed on the screen.
“Screen” refers to the LCD and the viewfinder screen.
Please note that the illustrations mainly refer to the ELURA90.
Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when you
have replaced the backup battery.
Setting the Time Zone/Daylight Saving Time
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
Operating modes (see below)
MENU
38)
SYSTEM
T.ZONE/DST•••N.Y.
Menu item showing at its default position
(
1. Press the MENU button to open the menu.
Button and switches to be operated
2. Turn the SET dial to select [SYSTEM] and press the
SET dial.
3. Turn the SET dial to select [T.ZONE/DST] and press
About the Operating Modes
The operating modes are determined by the position of the POWER switch and the
TAPE/CARD switch.
Operating Mode
CAMERA
POWER Switch
CAMERA
TAPE/CARD Switch
(TAPE)
PLAY (VCR)
CARD CAMERA
CARD PLAY
PLAY (VCR)
CAMERA
(TAPE)
(CARD)
PLAY (VCR)
(CARD)
: Function can be used in this mode.
: Function cannot be used in this mode.
CAMERA
CAMERA
Trademark Acknowledgments
•
•
is a trademark.
is a trademark.
®
• Windows is a registered trademark of Microsoft Corporation in the United States and/
or other countries.
• Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the
United States and other countries.
• Other names and products not mentioned above may be registered trademarks or
trademarks of their respective companies.
5
Table of contents
Introduction
Using this Manual............................................................................................5
Checking Supplied Accessories ......................................................................8
Components Guide..........................................................................................9
Basic Functions
Preparations
Preparing the Power Supply..........................................................................13
Loading/Unloading a Cassette ......................................................................16
Installing the Backup Battery.........................................................................17
Preparing the Camcorder ..............................................................................18
Using the Wireless Controller........................................................................20
Adjusting the LCD Screen .............................................................................21
Setting the Time Zone, Date and Time..........................................................22
Recording
Recording Movies on a Tape.........................................................................25
Zooming.........................................................................................................30
Tips for Making Better Videos........................................................................32
Playback
Playing Back a Tape......................................................................................33
Adjusting the Volume.....................................................................................35
Playing Back on a TV Screen........................................................................36
Advanced Functions
Menus and Settings.......................................................................................38
Recording
Using the Recording Programs .....................................................................46
Using the Night Modes ..................................................................................49
Skin Detail Function.......................................................................................51
Adjusting Exposure Manually ........................................................................52
Adjusting the Focus Manually........................................................................53
Setting the White Balance .............................................................................55
Setting the Shutter Speed..............................................................................57
Using the Self-Timer......................................................................................59
Changing the Recording Mode (SP/LP) ........................................................60
Audio Recording............................................................................................61
Using Digital Effects.......................................................................................63
Widescreen TV Recording (16:9) ..................................................................68
Playback
Magnifying the Image ....................................................................................69
Displaying the Data Code..............................................................................70
End Search....................................................................................................72
Returning to a Pre-marked Position ..............................................................73
Date Search...................................................................................................74
Other Functions
Customizing the Camcorder..........................................................................75
Changing the Display Language ...................................................................76
Other Camcorder Settings.............................................................................77
6
Editing
Recording to a VCR or Digital Video Device .................................................79
Recording from Analog Video Devices (VCR, TV or Camcorder) .................81
Recording from Digital Video Devices (DV Dubbing) ....................................82
Converting Analog Signals into Digital Signals (Analog-Digital Converter)...83
Audio Dubbing...............................................................................................85
Transferring Video Recordings to a Computer (IEEE1394)...........................88
E
Using a Memory Card
Inserting and Removing a Memory Card.......................................................89
Selecting the Image Quality/Size...................................................................90
File Numbers .................................................................................................92
Recording Still Images on a Memory Card....................................................93
Using the Flash....................................................................97
Reviewing a Still Image Right after Recording ..............................................99
Recording Motion JPEG Movies on a Memory Card...................................100
Selecting the Focusing Point.......................................................................103
Selecting the Drive Mode ............................................................................104
Recording Panoramic Images (Stitch Assist Mode) ....................................106
Playing Back a Memory Card......................................................................108
Protecting Images........................................................................................110
Erasing Images............................................................................................ 111
Combining Images (Card Mix).....................................................................112
Formatting a Memory Card..........................................................................116
Creating a Start-up Image ...........................................................................117
Direct Printing
Printing Still Images.....................................................................................118
Selecting the Print Settings .........................................................................121
Trimming Settings........................................................................................126
Printing with Print Order Settings ................................................................127
Transferring Images
Transferring Memory Card Images to a Computer......................................129
Direct Transfer Windows OS only ...............................................................130
Selecting Images for Transfer (Transfer Order)...........................................133
Additional Information
About the NETWORK Mode (DV Messenger Version2)..............................134
Screen Displays...........................................................................................135
List of Messages..........................................................................................138
Maintenance/Others ....................................................................................141
Troubleshooting...........................................................................................146
System Diagram (Availability differs from area to area) ..............................150
Optional Accessories...................................................................................151
Specifications...............................................................................................154
Item Codes ..................................................................................................156
Index............................................................................................................157
7
Checking Supplied Accessories
CA-570 Compact
Power Adapter
(incl. power cord)
NB-2LH Battery Pack
Lithium Button
Battery CR1616
WL-D85 Wireless
Controller
Lithium Button Battery
CR2025 for Wireless
Controller
Lens Cap and Lens
Cap Cord
SS-900
Shoulder Strap
STV-250N Stereo
Video Cable
IFC-300PCU USB
Cable
SDC-8M SD Memory
Card
DIGITAL VIDEO
SOLUTION DISK
WA-34 Wide
Attachment
The serial number of this product can be found at the battery attachment unit of the
camcorder. Write down the number and other information here and retain this book as a
permanent record of your purchase to aid identification in case of theft.
Date of Purchase:
Purchased From:
Dealer Address:
Dealer Phone No.:
Model Name: ELURA90/ELURA85/ELURA80 A
Serial No.:
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS.
Hg
8
Components Guide
ELURA90/ELURA85/ELURA80
E
REC SEARCH + button (
(fast forward) button (
29) /
34) /
EXP button (
52) /
END SEARCH button (
CARD MIX button (
72)
112) /
CARD + button (
108)
REC SEARCH – button (
(record review) button (
29) /
29) /
(stitch assist) button (
SLIDE SHOW button (
LCD BACKLIGHT button (
106) /
109)
21)
(rewind) button (
CARD – button ( 108)
D. EFFECTS button (
33) /
LCD screen (
21)
25)
63)
70)
OPEN button (
FOCUS button (
53) /
SET dial (
38)
DATA CODE button (
DRIVE MODE button (
WIDESCREEN button (
REC PAUSE button (
MENU button (
38)
104) /
68) /
BATTERY RELEASE button (
13)
Battery attachment unit (
Serial number
13) /
81)
97) /
(play/pause) button (
NIGHT MODE button (
(flash) button* (
CHARGE indicator (
13) /
93)
/
33)
49) /
Card access indicator (
Memory card slot (
89)
(stop) button (
33)
Backup battery compartment (
17)
* ELURA90/ELURA85 only.
9
Dioptric adjustment lever (
18)
TAPE/CARD switch (
Using a tape
5)
Viewfinder (
18)
19)
13)
25, 100)
Strap mount (
Using a memory card
Program selector ( 46)
Easy recording
Program AE
DC IN terminal (
Start/stop button (
UNLOCK button (
Power switch (
134)
5, 134)
Speaker (
35)
(print/share) button (
Accessory shoe ( 62)
119, 130)
Strap mount (
Grip belt (
19)
18)
Zoom lever (
30)
Cassette compartment (
OPEN/EJECT switch (
Cassette compartment cover (
16)
PHOTO button (
93)
16)
16)
10
E
Bottom View
Terminal cover
MIC terminal* (
AV terminal (
Stereo microphone
Mini video light
(assist lamp) ( 49)
Assist lamp (
Remote sensor ( 20)
Tripod socket ( 32)
62)
36) /
(phones) terminal (
DV terminal ( 79, 88)
USB terminal ( 118, 129)
Flash* ( 97)
35, 61)
49)
* ELURA90/ELURA85 only.
11
Wireless Controller WL-D85
START/
STOP PHOTO
ZOOM
CARD
DATE SEARCH
REW
PLAY
STOP
FF
PAUSE
SLOW
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
-
WIRELESS CONTROLLER WL D85
Transmitter
ZERO SET MEMORY button (
PHOTO button ( 93)
Zoom buttons ( 30)
33)
34)
33)
34)
73)
START/STOP button (
CARD –/+ buttons (
25, 100)
108)
buttons (
DATE SEARCH
/
74)
PLAY
button (
button (
button (
button (
34)
TV SCREEN button (
REW
–/
button (
button (
button (
button (
33)
34)
FF
STOP
+/
PAUSE
SLOW
34)
34)
u 2 button (
AUDIO DUB. button (
85)
135)
12
Basic Functions
Preparations
Preparing the Power Supply
E
Attaching the Battery Pack
1. Turn the POWER switch to OFF.
2. Move the viewfinder upward.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Press lightly and slide it in the direction
of the arrow until it clicks.
Charging the Battery Pack
1. Connect the power cord to the
adapter.
DC IN terminal
2. Plug the power cord into a power
outlet.
CHARGE indicator
3. Connect the power adapter to the
camcorder’s DC IN terminal.
The CHARGE indicator starts flashing. It
glows steadily when charging is complete.
4. When charging is complete,
disconnect the power adapter
from the camcorder. Unplug the
power cord from the power outlet
and disconnect it from the
adapter.
5. Remove the battery pack after use.
Press the BATTERY RELEASE button to remove the battery.
13
Using a Household Power Source
Connect to a household power source to use the camcorder without worrying about the
battery power. You can keep the battery pack attached; the battery power will not be
consumed.
1. Turn the POWER switch to OFF.
2. Connect the power cord to the
power adapter.
3. Plug the power cord into a power
outlet.
4. Connect the power adapter to the
camcorder’s DC IN terminal.
Turn off the camcorder before connecting or disconnecting the power adapter.
If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.
Do not connect any products that are not expressly recommended to the
camcorder’s DC IN terminal or to the power adapter.
You may hear some noise from the power adapter during use. This is not a
malfunction.
Do not disconnect and reconnect the power cord while charging a battery pack.
Charging may stop. The battery pack may not be charged correctly even if the
CHARGE indicator glows steady. The battery pack may also not be charged
correctly when a power outage occurs during charging. Remove the battery
pack and attach it back to the camcorder.
When the power adapter or battery pack is defective, the CHARGE indicator
flashes rapidly (at about 2 flashes/second) and charging stops.
The CHARGE indicator informs you about the charge status.
0-50%: Flashes once every second
More than 50%: Flashes twice every second
100%: Glows steadily
14
Charging, Recording and Playback Times
Below times are approximate and vary according to the charging, recording or
playback conditions.
NB-2LH
NB-2L
BP-2L12 BP-2L14
E
Charging Time
Max. Recording Time
Viewfinder
135 min.
120 min.
210 min.
240 min.
120 min.
95 min.
85 min.
100 min.
75 min.
70 min.
205 min.
165 min.
140 min.
250 min.
205 min.
180 min.
LCD
Normal
Bright
Typical Recording Time*
Viewfinder
70 min.
55 min.
50 min.
110 min.
55 min.
45 min.
40 min.
90 min.
120 min.
95 min.
85 min.
185 min.
150 min.
120 min.
105 min.
230 min.
LCD
Normal
Bright
Playback Time
* Approximate times for recording with repeated operations such as start/stop,
zooming, power on/off. Actual time may be shorter.
We recommend charging the battery pack in temperatures between 10 °C and
30 °C (50 °F and 86 °F). Outside the temperature range of 0 °C to 40 °C (32 °F
to 104 °F), the CHARGE indicator flashes rapidly and charging stops.
A lithium ion battery pack can be charged at any charge state. Unlike
conventional battery packs, you do not need to completely use or discharge it
before charging.
We recommend that you prepare battery packs 2 to 3 times longer than you
think you might need.
To conserve battery power, turn off the camcorder instead of leaving it in record
pause mode.
15
Loading/Unloading a Cassette
Use only videocassettes marked with the
logo.
1. Slide the OPEN/EJECT switch and
open the cassette compartment
cover.
Tape protection tab
The cassette compartment opens
automatically.
2. Load/unload the cassette.
• Load the cassette with the window
facing the grip belt.
• Unload the cassette by pulling it straight
out.
3. Press the
mark on the
cassette compartment until it
clicks.
4. Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.
Be careful not to get your fingers caught in the cassette compartment cover.
If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the POWER switch is set to OFF.
16
Installing the Backup Battery
The backup battery (lithium button battery CR1616) allows the camcorder to retain date,
time (
22) and other camcorder settings while the power source is disconnected.
E
Connect a power source to the camcorder when replacing the backup battery to retain the
settings.
1. Press the OPEN button to open the
LCD panel.
2. Pull out the battery holder.
3. Place the lithium battery with the +
side facing downward into the
battery holder.
4. Insert the battery holder.
5. Close the LCD panel.
The backup battery has a life span of about a year. “
you that it needs to be replaced.
” flashes in red to inform
17
Preparing the Camcorder
Adjusting the Viewfinder (Dioptric Adjustment)
1. Turn on the camcorder and keep
the LCD panel closed.
2. Pull out the viewfinder.
3. Adjust the dioptric adjustment
lever.
4. Push the viewfinder back in.
Attaching the Lens Cap
1. Attach the cord to the lens cap.
2. Pass the grip belt through the loop
on the cord.
Press the buttons on the lens cap when
attaching/removing it. Hook the lens cap
on the grip belt while you are recording,
and place it over the lens when you have
finished.
Fastening the Grip Belt
Hold the camcorder with your right
hand and adjust the belt with your
left.
Adjust the grip belt so that you can reach the
zoom lever with your index finger, and the
start/stop button with your thumb.
18
Attaching the Shoulder Strap
Pass the ends through the strap mount and adjust the length of the strap.
E
SS-900 Shoulder strap
Mounting the Wide Attachment
The WA-34 Wide Attachment gives you a wide perspective for indoor shots or panoramic
views (0.7x). The wide attachment is for use at maximum wide-angle.
Screw the wide attachment fully into
the lens filter thread.
Do not look directly at the sun or other strong light sources through the wide
attachment. It could damage your eyesight.
If you zoom to telephoto, the picture will not be in focus.
The wide attachment may obstruct the remote sensor (the range of the wireless
controller narrows), or may cause a shadow to appear on the picture when
recording with the assist lamp.
Filters cannot be used with the wide attachment.
If dust accumulates on the wide attachment or on the camcorder lens, clean
both lenses gently with a blower brush.
Do not touch the lens to avoid smudges and fingerprints.
Do not store the wide attachment in a humid place as it may mold.
19
Using the Wireless Controller
Point it at the camcorder’s remote
sensor when you press the buttons.
Inserting the Battery
The wireless controller operates with a lithium button battery CR2025.
1. Press the tab in the direction of
the arrow and pull out the battery
holder.
2. Place the lithium button battery
with the + side facing up.
Tab
3. Insert the battery holder.
The wireless controller may not work properly when the remote sensor is
subjected to strong light sources or direct sunlight.
If the wireless controller does not work, check if the remote sensor is set to
[OFF
](
77).
When the camcorder cannot be operated with the wireless controller, or when it
can only be operated in very close range, replace the battery.
20
Adjusting the LCD Screen
Rotating the LCD Screen
E
Press the OPEN button and open the
LCD panel 90 degrees.
• You can rotate the panel downward by 90
degrees.
• You can rotate the panel by 180 degrees
toward the lens.
LCD Backlight
You can switch the brightness of the LCD screen between normal and bright by pressing
the LCD BACKLIGHT button. This is useful for outdoor recordings.
LCD BACKLIGHT button
Press the LCD BACKLIGHT button.
This setting does not affect the brightness of the recording or the viewfinder
screen.
When using a battery pack, the camcorder retains the setting even if you
change the position of the POWER switch.
The battery usage time shortens when the LCD screen is set brighter (
15).
21
Setting the Time Zone, Date and Time
Set the time zone, date and time when you first start using your camcorder, or when you
have replaced the backup battery.
Setting the Time Zone/Daylight Saving Time
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
SYSTEM
T.ZONE/DST•••N.Y.
(
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [SYSTEM] and press the
SET dial.
3. Turn the SET dial to select [T.ZONE/DST] and press
the SET dial.
The time zone setting appears (see table on the next page). The
default setting is New York.
4. Turn the SET dial to select the setting option that represents your time
zone and press the SET dial.
To adjust for daylight saving time, select the time zone with the
next to the area.
Setting the Date and Time
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
D/TIME SET•••JAN. 1,2005
12:00 AM
MENU
38)
SYSTEM
(
5. Turn the SET dial to select [D/TIME SET] and press
the SET dial.
The year display starts to flash.
6. Turn the SET dial to select the year, and press the
SET dial.
• The next part of the display starts flashing.
• Set the month, day, hours and minutes in the same way.
22
7. Press the MENU button to close the menu and to
start the clock.
E
16
1
4
20
19
2
18
24
3
17
6
7
9
10
15
8
5
21
23
14
12
22
11
13
14 15 16 17 18 19 20 21 22 23 24
1
2
3
4
5
6
7
8
9
10 11 12 13
No. Time zone
No. Time zone
1
2
LONDON
PARIS
13
14
15
16
17
18
19
20
21
22
23
24
WELLGTN (Wellington)
SAMOA
3
CAIRO
HONOLU. (Honolulu)
ANCHOR. (Anchorage)
L.A. (Los Angeles)
DENVER
4
MOSCOW
DUBAI
5
6
KARACHI
DACCA
7
CHICAGO
8
BANGKOK
H. KONG (Hong Kong)
TOKYO
N.Y. (New York)
CARACAS
9
10
11
12
RIO (Rio de Janeiro)
SYDNEY
SOLOMON
FERNAN. (Fernando de Noronha)
AZORES
Once you have set time zone, date and time, you do not need to reset the clock
each time you travel to another time zone. Just set the time zone to the one of
your destination, and the camcorder automatically adjusts the clock.
23
Displaying Date and Time during Recording
You can display the date and time in the lower left corner of the screen.
PLAY (VCR)
CARD PLAY
CAMERA
CAMERA
MENU
38)
DISPLAY SETUP/
D/T DISPLAY••OFF
(
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [DISPLAY SETUP/ ] and
press the SET dial.
3. Turn the SET dial to select [D/T DISPLAY] and press
the SET dial.
4. Turn the SET dial to select [ON].
5. Press the MENU button to close the menu.
24
Recording
Recording Movies on a Tape
Before You Begin Recording
E
Make a test recording first to check if the camcorder operates correctly. If necessary,
clean the video heads (
142).
Recording
1. Remove the lens cap.
2. Set the camcorder to CAMERA
mode.
Set the POWER switch to CAMERA and
the TAPE/CARD switch to
.
3. Push the OPEN button at the LCD
panel and open the LCD panel.
4. Press the start/stop button to
begin recording.
Press the start/stop button again to pause
recording.
When You Have Finished Recording
1. Turn the POWER switch to OFF.
2. Close the LCD panel.
3. Replace the lens cap.
4. Unload the cassette.
5. Disconnect the power source.
25
About the LCD and viewfinder screen: The screens are produced with
extremely high-precision manufacturing techniques, with more than
99.99% of the pixels operating to specification. Less than 0.01% of the
pixels may occasionally misfire or appear as black or green dots. This has
no effect on the recorded image and does not constitute a malfunction.
The camcorder will shut off after 5 minutes when left in record pause
mode to protect tape and video heads. “
AUTO POWER OFF” appears
20 seconds before shutoff. To continue recording, turn the POWER switch
to OFF and then back to CAMERA.
Wait until the tape counter stops completely before you start recording.
When you do not remove the cassette, you can record the next scene without
producing any noise or blank sections between the recordings even if you turn
the camcorder off.
Bright light may make it difficult to use the LCD screen. In such case, use the
viewfinder instead.
When recording near loud sounds (such as fireworks, drums or concerts),
sound may become distorted or may be recorded not in the actual sound level.
This is not a malfunction.
Allowing the Subject to Monitor the LCD Screen
You can rotate the LCD panel so that the screen faces in the
same direction as the lens. The viewfinder switches on allowing
you to use the viewfinder while the subject can monitor the
screen.
The image appears mirror reversed (LCD MIRROR ON).
However, you can choose to display the image as it is being
recorded (LCD MIRROR OFF).
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
DISPLAY SETUP/
LCD MIRROR•••ON
(
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [DISPLAY SETUP/ ] and
press the SET dial.
3. Turn the SET dial to select [LCD MIRROR] and press
the SET dial.
4. Turn the SET dial to select [OFF].
5. Press the MENU button to close the menu.
26
When [LCD MIRROR] is set to [ON], only tape or card operation and self-timer
displays appear on the LCD screen (all displays appear on the viewfinder screen).
E
27
Screen Displays during Recording
Remaining battery charge
The battery symbol indicates the charge
status of the battery pack.
• “
” starts flashing in red when the
battery pack is empty.
• When you attach an empty battery
pack, the power may turn off without
Time Code
displaying “
”.
Indicates the recording time in hours,
minutes and seconds.
• The actual battery charge may not be
indicated accurately depending on the
condition under which battery pack
and camcorder are used.
Remaining tape
Indicates the remaining time of the tape
in minutes. “
recording. “
” moves during
When “
” flashes
END” flashes when the
“
” flashes in red when the lithium
tape reaches the end.
button battery is not installed, or when it
needs replacing.
• When the time left is less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape, the
indication may not be displayed
correctly.
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
28
Reviewing and Searching when Recording
REC SEARCH – button/
(record review) button
E
REC SEARCH + button
Record Review
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
In record pause mode, this function allows you to review the last few seconds of your
recording to check if it has been recorded properly.
Press and release the
(record review) button.
The camcorder rewinds the tape, plays back the last few seconds,
and returns to record pause mode.
Record Search
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
In record pause mode, this function allows you to play back the tape (forward or reverse)
to locate the point where you wish to begin recording.
Press and hold the REC SEARCH + button (forward) or
– button (reverse).
• Release the button at the point you wish to begin recording.
• The camcorder returns to record pause mode.
29
Zooming
The camcorder is equipped with optical zoom and digital zoom.
Zoom in
Zoom out
Zoom lever
Optical Zoom
20x optical zoom
18x optical zoom
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
Move the zoom lever toward W to zoom out (wide-
angle). Move it toward T to zoom in (telephoto).
Press the zoom lever slightly for a slow zoom. Press harder for a
faster zoom.
You can also use the T and W buttons on the wireless controller. However, you
cannot control the zoom speed.
The zoom speed is slightly faster in record pause mode.
Keep at least 1 m (3.3 ft.) to the subject. At wide-angle, you can focus on a
subject as close as 1 cm (0.39 in.).
30
Digital Zoom
When the digital zoom is activated, the camcorder automatically switches between optical
and digital zoom. With digital zoom, image resolution becomes lower the more you zoom
in.
E
80x/400x digital zoom
72x/360x digital zoom
(80x in CARD CAMERA mode)
(72x in CARD CAMERA mode)
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
CAMERA SETUP
D.ZOOM•••••••OFF
(
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [CAMERA SETUP] and
press the SET dial.
3. Turn the SET dial to select [D.ZOOM] and press the
SET dial.
4. Turn the SET dial to select a setting option.
5. Press the MENU button to close the menu.
Digital zoom cannot be used in the night modes.
Digital zoom cannot be used in Stitch Assist mode, or when the multi-image
screen is selected.
A zoom indicator appears for 4 seconds. It extends in light blue when the digital
zoom is set to 80x(ELURA90) or 72x(ELURA85/ELURA80), and extends further
in dark blue when set to 400x(ELURA90) or 360x(ELURA85/ELURA80).
31
Tips for Making Better Videos
Holding the Camcorder
For maximum stability, grip the camcorder in your right hand and keep your
right elbow pressed against your body. If necessary, support the camcorder
with your left hand. Be careful that your fingers do not touch the microphone
or lens.
For More Stability
Lean against a wall
Put the camcorder on a table
Lie on your elbow
Kneel on one knee
Use a tripod
Lighting
When recording outdoors, we
recommend recording with the sun at
your back.
When using a tripod, do not leave the viewfinder exposed to direct sunlight as it
may melt (due to concentration of the light by the lens).
Do not use tripods with fastening screws longer than
5.5 mm (0.2 in.) as it may damage the camcorder.
32
Playback
Playing Back a Tape
If the playback picture is distorted, clean the video heads using a Canon Head Cleaning
E
Cassette or a commercially available digital video head-cleaning cassette (
142).
1. Set the camcorder to PLAY (VCR)
mode.
Set the POWER switch to PLAY (VCR)
and the TAPE/CARD switch to
.
2. Open the LCD panel.
3. Press the
tape.
button to rewind the
button to begin
button to stop
4. Press the
playback.
/
5. Press the
playback.
To use the viewfinder, close the LCD panel.
About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
33
Special Playback Modes
REW
PLAY
STOP
SLOW
FF
PAUSE
/ (Playback Pause)
To pause playback, press the
/
button during normal playback.
(Fast Forward Playback) /
(Rewind Playback)
Plays back the tape at 9.5 times normal speed (forward or reverse). Press and hold the
button during normal playback or fast forward.
–/
(Reverse Playback)
Press the button on the wireless controller during normal playback. Press the
button to return to normal playback.
(play)
+/
(Frame Advance) / –/
(Frame Reverse)
Plays back frame-by-frame. Press the button on the wireless controller repeatedly during
playback pause. Press and hold it to play back continuous frame advance/frame reverse.
SLOW
Plays back at about 1/3 normal speed. Press the button on the wireless controller during
normal or reverse playback. Press the (play) button to return to normal playback.
(Slow Forward)/(Slow Reverse)
x2 (Forward x2 Playback)/(Reverse x2 Playback)
Plays back at 2 times normal speed. Press the button on the wireless controller during
normal or reverse playback. Press the
(play) button to return to normal playback.
There is no sound during special playback.
The picture may become distorted during some special playback modes.
The camcorder stops the tape automatically after 5 minutes in playback pause
mode to protect tape and video heads.
34
Adjusting the Volume
When you use the LCD screen for playback, the camcorder plays back the sound via
built-in speaker. The speaker does not sound when you close the LCD panel. Use
headphones when using the viewfinder.
E
SET dial
(phones) terminal
Speaker
When Using Headphones
The headphones terminal also serves as AV terminal. Headphones can only be used
when “ ” is displayed on the screen. If not, change the setting following the procedure
below.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
VCR SETUP
AV/PHONES
••AV
(
Open the menu and select [VCR SETUP]. Select [AV/PHONES ], set it to
[PHONES ] and close the menu.
The speaker does not sound when “ ” is displayed.
Do not connect headphones unless “ ” is displayed as it produces noise.
Adjusting the Volume
CAMERA
CARD CAMERA
PLAY (VCR)
CARD PLAY
Turn the SET dial up to increase the volume, and down
to lower the volume.
• A volume bar appears for 2 seconds.
• You can turn off the volume completely by turning the SET dial
down until [OFF] appears. Turn the SET dial up to increase the
volume again.
35
Playing Back on a TV Screen
The AV terminal also serves as headphones terminal. When “ ” is displayed on the
screen, change the setting following the procedure below.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
VCR SETUP
AV/PHONES
••AV
(
Open the menu and select [VCR SETUP]. Select [AV/PHONES ], set it to
[AV] and close the menu.
TVs with Audio/Video Terminals
Refer also to the TV or VCR instruction manual.
VIDEO
AUDIO
Signal flow
L
STV-250N Stereo Video Cable
(supplied)
R
1. Turn off all devices before starting the connections.
2. Connect the STV-250N Stereo Video Cable to the camcorder’s AV
terminal and the audio/video terminals on the TV/VCR.
Connect the white plug to the white audio terminal L (left), the red plug to the red audio
terminal R (right) and the yellow plug to the yellow video terminal VIDEO.
3. If connecting to a TV, set the input selector to VIDEO. If connecting to
a VCR, set the input selector to LINE.
We recommend powering the camcorder from a household power source.
TVs with Video ID-1 system: Recordings made in the widescreen mode will be
automatically played back in widescreen mode.
36
Selecting the Audio Output Channel
You can select the output channels when playing back a tape with audio recorded on two
channels.
E
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
MENU
38)
AUDIO SETUP
OUTPUT CH••••L/R
(
1. Press the MENU button to open the menu.
2. Turn the SET dial to select [AUDIO SETUP] and
press the SET dial.
3. Turn the SET dial to select [OUTPUT CH] and press
the SET dial.
4. Turn the SET dial to select a setting option.
• L/R: Stereo: L+R channels, Bilingual: Main+Sub.
• L/L: Stereo: L channel, Bilingual: Main.
• R/R: Stereo: R channel, Bilingual: Sub.
5. Press the MENU button to close the menu.
The setting resets to the L/R setting when you turn the camcorder off.
37
Advanced Functions
Menus and Settings
Many of the camcorder’s advanced functions are selected from menus that appear on the
screen.
SET dial
MENU button
Selecting Menus and Settings
1. Press the MENU button to open the menu.
2. Turn the SET dial to select a submenu and press the
SET dial.
3. Turn the SET dial to select a menu item and press
the SET dial.
4. Turn the SET dial to select a setting option.
5. Press the MENU button to close the menu.
When setting the white balance, shutter speed or language,
press the SET dial first before pressing the MENU button.
Pressing the MENU button at any time closes the menu.
Items that are not available appear in purple.
38
Menu and Default Settings
Default settings are shown in boldface.
CAMERA MENU
E
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
Submenu
D.EFFECT SETUP
Menu Item
CARD MIX
Setting Options
112
D.E.SELECT
OFF, FADER, EFFECT, MULTI-S
63
FADER TYPE
EFFECT TYPE
FADE-T, WIPE, CORNER, JUMP, FLIP,
PUZZLE, ZIGZAG, BEAM, TIDE
ART, BLACK&WHITE, SEPIA, MOSAIC,
BALL, CUBE, WAVE, COLOR MASK,
MIRROR
M.S.SPEED
M.S.SPLIT
SHUTTER
MANUAL, FAST, MODERATE, SLOW
4, 9, 16
CAMERA SETUP
AUTO, 1/60, 1/100, 1/250, 1/500, 1/1000,
1/2000
57
58
31
A.SL SHUTTER
D.ZOOM
ON, OFF
OFF, 80X, 400X
ON, OFF
OFF, 72X, 360X
IMG STAB
78
55
98
59
49
51
95
60
61
62
61
61
WHITE BAL.
AF AST LAMP
SELF TIMER
NIGHT MODE*
SKIN DETAIL
STILL I.REC
REC MODE
AV/PHONES
WIND SCREEN
AUDIO MODE
VOLUME
AUTO, SET
, INDOOR , OUTDOOR
AUTO, OFF
ON
, OFF
NIGHT,
NIGHT+, S.NIGHT
SOFT, NORMAL
OFF,
FINE,
NORMAL
VCR SETUP
SP, LP
AV, PHONES
AUTO, OFF
16bit, 12bit
AUDIO SETUP
*ELURA90/ELURA85 only.
39
Submenu
DISPLAY SETUP/
Menu Item
BRIGHTNESS
Setting Options
77
26
135
24
76
76
78
77
77
22
22
75
LCD MIRROR
TV SCREEN
D/T DISPLAY
LANGUAGE
DATE FORMAT
DEMO MODE
WL.REMOTE
BEEP
ON, OFF
ON, OFF
ON, OFF
See list of languages.
ON, OFF
SYSTEM
ON, OFF
ON, OFF
T.ZONE/DST
D/TIME SET
S-UP SOUND
SHTR SOUND
OPER.SOUND
SELF-T SOUND
See list of time zones.
MY CAMERA
OFF, DEFAULT, MY SOUND
40
PLAY (VCR) MENU
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
E
Submenu
D.EFFECT SETUP
Menu Item
Setting Options
OFF, FADER, EFFECT, MULTI-S
D.E.SELECT
63
FADER TYPE
FADE-T, WIPE, CORNER, JUMP, FLIP,
PUZZLE, ZIGZAG, BEAM, TIDE
EFFECT TYPE
ART, BLACK&WHITE, SEPIA, MOSAIC,
BALL, CUBE, WAVE, COLOR MASK,
MIRROR
M.S.SPEED
M.S.SPLIT
MANUAL, FAST, MODERATE, SLOW
4, 9, 16
VCR SETUP
REC MODE
AV/PHONES
AV DV
SP, LP
60
36
84
37
85
62
61
87
87
90
91
92
77
135
135
71
70
70
76
76
AV, PHONES
ON, OFF
AUDIO SETUP
OUTPUT CH
AUDIO DUB.
WIND SCREEN
AUDIO MODE
12bit AUDIO
MIX BALANCE
IMG QUALITY
MOVIE SIZE
FILE NOS.
L/R, L/L, R/R
AUDIO IN, MIC. IN
AUTO, OFF
16bit, 12bit
STEREO1, STEREO2, MIX/FIXED, MIX/
VARI.
CARD SETUP
SUPER FINE, FINE, NORMAL
320x240, 160x120
RESET, CONTINUOUS
DISPLAY SETUP/
BRIGHTNESS
TV SCREEN
DISPLAYS
ON, OFF
ON, OFF <PLAYBK>
ON, OFF
6SEC.DATE
DATA CODE
D/TIME SEL.
LANGUAGE
DATE FORMAT
DATE/TIME, CAMERA DATA, CAM.& D/T
DATE, TIME, DATE & TIME
See list of languages.
41
Submenu
Menu Item
Setting Options
SYSTEM
WL.REMOTE
ON, OFF
77
77
22
22
75
BEEP
ON, OFF
T.ZONE/DST
D/TIME SET
S-UP SOUND
SHTR SOUND
OPER.SOUND
SELF-T SOUND
See list of time zones.
MY CAMERA
OFF, DEFAULT, MY SOUND
42
CARD CAMERA MENU
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
Setting Options
E
Submenu
D.EFFECT SETUP
Menu Item
EFFECT
OFF, BLACK&WHITE
AUTO, 1/60, 1/100, 1/250
ON, OFF
66
57
58
31
CAMERA SETUP
SHUTTER
A.SL SHUTTER
D.ZOOM
OFF, 80X
OFF, 72X
, OUTDOOR
WHITE BAL.
AF AST LAMP
FOCUS PRI.
SELF TIMER
ND
AUTO, SET
AUTO, OFF
ON, OFF
, INDOOR
55
98
103
59
94
49
51
99
90
90
91
92
61
62
61
77
26
135
24
76
76
78
ON
, OFF
AUTO, OFF
NIGHT MODE*
SKIN DETAIL
REVIEW
NIGHT,
NIGHT+, S.NIGHT
SOFT, NORMAL
OFF, 2sec, 4sec, 6sec, 8sec, 10sec
SUPER FINE, FINE, NORMAL
1280x960, 640x480
320x240, 160x120
CARD SETUP
IMG QUALITY
IMAGE SIZE
MOVIE SIZE
FILE NOS.
RESET, CONTINUOUS
AV, PHONES
VCR SETUP
AV/PHONES
WIND SCREEN
VOLUME
AUDIO SETUP
AUTO, OFF
DISPLAY SETUP/
BRIGHTNESS
LCD MIRROR
TV SCREEN
D/T DISPLAY
LANGUAGE
DATE FORMAT
DEMO MODE
ON, OFF
ON, OFF
ON, OFF
See list of languages.
ON, OFF
*ELURA90/ELURA85 only.
43
Submenu
Menu Item
Setting Options
SYSTEM
WL.REMOTE
ON, OFF
77
77
22
22
75
BEEP
ON, OFF
T.ZONE/DST
D/TIME SET
S-UP SOUND
SHTR SOUND
OPER.SOUND
SELF-T SOUND
See list of time zones.
MY CAMERA
OFF, DEFAULT, MY SOUND
44
CARD PLAY MENU
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
E
Submenu
Menu Item
PRINT ORDERS
Setting Options
CARD
NO, YES
128
133
111
116
110
127
133
36
OPERATIONS
(Single Image
Display)
ALL ERASE
TRANS.ORDERS NO, YES
ALL ERASE
IMAGE ERASE
CANCEL, SINGLE, ALL
FORMAT
CANCEL, EXECUTE
CARD
OPERATIONS
PROTECT
(Index Screen)
PRINT ORDER
TRANSFER ORDER
VCR SETUP
AV/PHONES
BRIGHTNESS
TV SCREEN
DISPLAYS
AV, PHONES
DISPLAY SETUP/
77
ON, OFF
135
135
70
ON, OFF <PLAYBK>
DATE, TIME, DATE & TIME
See list of languages.
D/TIME SEL.
LANGUAGE
DATE FORMAT
WL.REMOTE
BEEP
76
76
SYSTEM
ON, OFF
77
ON, OFF
77
T.ZONE/DST
D/TIME SET
See list of time zones.
22
22
MY CAMERA
CREATE START-UP IMAGE
117
75
SEL.S-UP IMG
S-UP SOUND
SHTR SOUND
OPER.SOUND
SELF-T SOUND
NO IMAGE, CANON LOGO, MY IMAGE
OFF, DEFAULT, MY SOUND
75
PRINT
Appears when connecting a printer with direct print function.
128
45
Recording
Using the Recording Programs
Easy Recording Program
The camcorder adjusts focus, exposure and other settings
automatically, allowing you to just point and shoot.
Program AE Modes
Auto
The camcorder adjusts focus, exposure and other settings
automatically. However, you have the option of adjusting the settings
manually.
Sports
Use this mode to record sports scenes (such as tennis or golf) or
moving objects (such as roller coasters).
Portrait
Use this mode to give accent to your subject by blurring the
background or foreground. The blur effect increases the more you
zoom to telephoto.
Spotlight
Use this mode to record spotlit scenes or fireworks.
Sand & Snow
Use this mode in bright places such as a sunny beach or ski resort. It
prevents the subject from being underexposed.
Low Light
Use this mode to record in dimly lit places.
46
E
Program selector
Availability of Functions in Each Mode:
Recording Program
Image Stabilizer
Focus
*
(A)
(A)
(A)
White Balance
Shutter Speed
Exposure Lock
Digital Effects
Card Mix
(A)
: Available
: Not available A: Auto setting
Shaded area: Can be used only in CAMERA mode.
* The setting is automatically set to ON.
Selecting the Easy Recording Program
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
Set the program selector to EASY.
EASY” appears.
“
47
Selecting the Program AE Mode
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
1. Set the program selector to
.
2. Press the SET dial.
A list of the program AE modes appears.
3. Select a mode and press the SET dial.
The symbol of the mode appears on the upper left corner of the
screen.
The setting resets to the Auto mode when you change the position of the
program selector.
Do not change the mode during recording as the brightness of the image may
change abruptly.
Sports/Portrait mode:
The picture may not appear smooth when played back.
Sand & Snow mode:
- The subject may become overexposed in dark surroundings. Check the
image on the screen.
- The picture may not appear smooth when played back.
Low Light mode:
- Moving subjects may leave a trailing afterimage.
- Picture quality may not be as good as in other modes.
- The camcorder may have difficulty to focus automatically.
48
Using the Night Modes
NIGHT
Allows you to record in dark places where lights cannot be used,
E
without sacrificing color.
The assist lamp lights up and stays on, allowing you to record in
dark places without sacrificing color.
NIGHT+
Allows you to record in very dark places without sacrificing color.
The assist lamp lights up automatically responding to the
surrounding brightness.
S. NIGHT
Night Mode
Night+ Mode
Super Night Mode
Mini video light (assist lamp)
Assist lamp
Program selector
SET dial
MENU button
NIGHT MODE button
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
(
CAMERA SETUP
NIGHT MODE•••
NIGHT+
38)
1. Set the program selector to
.
2. Open the menu and select [CAMERA SETUP]. Select [NIGHT MODE],
select a setting option and close the menu.
3. Press the NIGHT MODE button.
• The symbol of the selected mode appears on the screen.
• Pressing the NIGHT MODE button again resets the camcorder to the Auto mode.
49
1. Set the program selector to
.
2. Press the NIGHT MODE button.
• " " appears.
• Pressing the NIGHT MODE button again resets the camcorder to the Auto mode.
Do not point the mini video light at persons while they are driving.
Do not look at the mini video light for a long time.
Do not use the mini video light close to people’s eyes.
Moving subjects may leave a trailing afterimage.
Picture quality may not be as good as in other modes.
White points may appear on the screen.
Autofocus may not work as well as in other modes. In such case, adjust the
focus manually.
Digital zoom and multi-image screen cannot be used while a night mode is
activated.
The program AE mode cannot be changed while a night mode is activated.
50
Skin Detail Function
When shooting close-ups of people, the camcorder automatically softens details to
reduce the appearance of skin imperfections for a more complimentary appearance.
E
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
CAMERA SETUP
SKIN DETAIL••NORMAL
(
Open the menu and select [CAMERA SETUP]. Select [SKIN DETAIL], set it
to [SOFT] and close the menu.
Skin detail function cannot be used when the program selector is set to EASY.
[SKIN DETAIL] resets to [NORMAL] when you change the position of the
POWER switch or the program selector.
To obtain the best effect, use this function when recording a person in close-up.
Note that areas similar to the skin color may lack in detail.
51
Adjusting Exposure Manually
SET dial
Program selector
EXP button
Exposure Lock
You can lock the exposure when recording in situations where the lighting may change
suddenly to control the brightness of the image.
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
1. Set the program selector to
.
2. Press the EXP button.
• “E.LOCK 0” appears on the screen.
• When you operate the zoom during exposure lock, the
brightness of the image may change.
Exposure Adjustment
When the exposure is locked, you can adjust it manually to handle difficult lighting
conditions. The camcorder’s iris can be set to any position from fully closed to fully open.
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
Turn the SET dial to adjust the brightness of the image.
The adjustment range depends on the brightness at the time you
locked the exposure.
52
Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
E
Subjects with low
contrast or without
vertical lines
Through
dirty or wet
windows
Reflective
surfaces
Fast Moving
Subjects
Night Scenes
SET dial
Zoom lever
FOCUS button
Program selector
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
1. Set the program selector to
.
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
“MF” appears.
4. Turn the SET dial to adjust the focus.
• Turn the SET dial up or down until the image appears focused.
• Press the FOCUS button to return to autofocus.
53
The setting resets to autofocus when you switch the program selector to EASY.
Readjust the focus when you have turned off the camcorder.
Infinity Focus
Use this function when you wish to focus on faraway subjects such as mountains or
fireworks.
Press the FOCUS button more than 2 seconds after step 2 in Adjusting
the Focus Manually.
“MF ” appears.
When you operate the zoom or turn the SET dial, “ ” disappears and the
camcorder changes to manual focus.
54
Setting the White Balance
You can use the preset modes to reproduce colors more accurately, or set a custom white
balance to obtain the optimal setting.
E
AUTO
SET
Auto white balance
Use the custom white balance setting to make white subjects
appear white under colored lighting.
INDOOR
Use this mode for recording under changing lighting condition,
video lights or sodium lamps.
OUTDOOR
Use this mode for recording night scenes, fireworks, sunrise or
sunset.
White sheet or paper
Zoom lever
SET dial
Program selector
MENU botton
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
CAMERA SETUP
WHITE BAL.•••AUTO
(
1. Set the program selector to
.
2. For custom white balance: Point the camcorder at a white object and
zoom in until it fills the whole screen.
Keep the camcorder zoomed at the white object until step 3 is completed.
3. Open the menu and select [CAMERA SETUP]. Select [WHITE BAL.],
select a setting option and close the menu.
When you have selected [SET ]: “ ” flashes and stops flashing when settings is
complete.
55
Use the auto setting for normal outdoor scenes.
When the program selector is set to EASY, white balance is preset to [AUTO].
The camcorder retains the custom white balance setting even if you turn it off.
However, it resets to [AUTO] when you change the position of the TAPE/CARD
switch.
When you have set the custom white balance:
- Depending on the light source, “ ” may keep flashing. The result will still be
better than with the auto setting.
- Reset the white balance when the lighting condition changes.
- Turn off the digital zoom.
Custom white balance may provide better results in the following cases:
- Changing lighting conditions
- Close-ups
- Subjects in a single color (sky, sea or forest)
- Under mercury lamps or certain types of fluorescent lights
56
Setting the Shutter Speed
You can adjust the shutter speed manually to make stable shots of fast moving subjects.
E
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
CAMERA SETUP
SHUTTER••••••AUTO
(
1. Set the program selector to
.
2. Set the program AE mode to the
(Auto) mode.
3. Open the menu and select [CAMERA SETUP].
4. Select [SHUTTER].
5. Select the shutter speed and press the SET dial.
CAMERA Mode
AUTO
CARD CAMERA Mode
AUTO
1/60
1/60
1/100
1/100
1/250
1/250
1/500
1/1000
1/2000
6. Close the menu.
If the shutter speed is set to 1/500 or higher in CAMERA mode and you switch
to CARD CAMERA mode, it automatically changes to 1/250.
Do not point the camcorder directly at the sun when the shutter speed is set to
1/1000 or higher.
The image may flicker when recording with high shutter speeds.
Recording under fluorescent lights (CAMERA mode): In Easy Recording, Auto
mode or the night modes, the camcorder automatically detects the flicker of
fluorescent lighting and adjusts the shutter speed accordingly. However, if the
screen starts to flicker, select AUTO mode and set the shutter speed to 1/100.
The setting resets to the auto setting when you switch the program selector to
EASY, or change the program AE mode.
Guidelines for Recording with High Shutter Speeds:
- Outdoor sports such as golf or tennis: 1/2000
- Moving objects such as cars or roller coasters: 1/1000, 1/500 or 1/250
- Indoor sports such as basketball: 1/100
57
Auto Slow Shutter
In Easy Recording mode and when [SHUTTER] is set to [AUTO] in Auto mode, the
camcorder uses shutter speeds down to 1/30 in CAMERA mode and 1/15 in CARD
CAMERA mode. This allows you to record brightly in places with insufficient lighting.
However, you can set the camcorder not to use a slow shutter speed.
*
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
*
Only when the flash mode is set to
(flash off).
MENU
38)
CAMERA SETUP
A.SL SHUTTER•ON
(
Open the menu and select [CAMERA SETUP]. Select [A.SL SHUTTER],
set it to [OFF] and close the menu.
When set to [ON], moving subjects may leave a trailing afterimage.
The camcorder retains the setting separately in CAMERA and CARD CAMERA
mode.
The setting cannot be changed when exposure is locked.
If “ ” (camcorder shake warning) appears in CARD CAMERA mode, stabilize
the camcorder, for example, by mounting it on a tripod or placing it on a table.
58
Using the Self-Timer
The self-timer can be used for recording movies and still images.
E
SET dial
PHOTO button
Start/stop button
MENU button
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
CAMERA SETUP
SELF TIMER•••OFF
(
1. Open the menu and select [CAMERA SETUP]. Select [SELF TIMER],
set it to [ON ] and close the menu.
“
” appears.
2. Press the start/stop button.
• The camcorder starts recording after a 10-second countdown (2 seconds when
using the wireless controller). The count down appears on the screen.
• To record a still image, press the PHOTO button (
93).
To cancel the self-timer, set [SELF TIMER] to [OFF]. Once the countdown has
begun, you can also press the start/stop button (when recording movies) or the
PHOTO button (when recording still image) to cancel the self-timer.
The self-timer will be canceled when you turn off the camcorder.
59
Changing the Recording Mode (SP/LP)
You can choose between SP (standard play) and LP (long play). LP extends the tape
usage by 1.5 times.
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
MENU
38)
VCR SETUP
REC MODE•••••SP
(
To change to LP mode, open the menu and select [VCR SETUP]. Select
[REC MODE], set it to [LP] and close the menu.
Tapes recorded in LP mode cannot be used for audio dubbing.
Depending on the nature and usage condition of the tape, picture and
sound recorded in LP mode may be distorted. We recommend using the
SP mode for important recordings.
If you record in both SP and LP modes on the same tape, the playback picture
may become distorted and the time code may not be written correctly.
If you play back a tape that has been recorded in LP mode with another digital
device on this camcorder, or vice versa, picture and sound may become
distorted.
60
Audio Recording
Changing the Audio Mode
E
You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
MENU
38)
AUDIO SETUP
AUDIO MODE•••12bit
(
Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], set it
to [16bit] and close the menu.
“16bit” appears for approximately 4 seconds.
Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used
when “ ” is displayed on the screen. If not, change the setting following the procedure
below.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
VCR SETUP
AV/PHONES ••AV
(
Open the menu and select [VCR SETUP]. Select [AV/PHONES ], set it to
[PHONES ] and close the menu.
Adjusting the Headphone Volume
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
AUDIO SETUP
VOLUME•••••
(
Open the menu and select [AUDIO SETUP]. Select [ VOLUME], adjust
the volume with the SET dial and close the menu.
You can turn off the volume completely by turning the SET dial down until [OFF] appears.
Turn the SET dial up to increase the volume again.
61
Wind Screen
The camcorder reduces wind noise automatically. However, you can turn off the wind
screen when recording indoors, or when you want the microphone to be as sensitive as
possible.
*
CARD PLAY
CAMERA
PLAY (VCR)
CARD CAMERA
* Only when [AUDIO DUB.] is set to [MIC. IN].
MENU
38)
AUDIO SETUP
WIND SCREEN••AUTO
(
Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it
to [OFF] and close the menu.
“WS
” appears when you turn the wind screen off.
The wind screen function can only be used with the built-in microphone.
Recording with an External Microphone
You can attach a commercially available
microphone equipped with an accessory
shoe.
Refer also to the instruction manual of the
microphone.
1. Attach the microphone to the
accessory shoe.
2. When using a commercially
available microphone, connect it
to the MIC terminal.
When recording in silent places, the built-in microphone may pick up the motor
noise of the camcorder. In such case, we recommend using an external
microphone.
When using a commercially available microphone:
- Use a microphone with built-in power supply (condenser microphone). Almost
all stereo microphones with a plug diameter of 3.5 mm (0.14 in.) can be
connected. The audio level may differ from that of the built-in microphone.
- Long microphones may appear on the screen.
62
Using Digital Effects
Faders ( 65)
Begin or end scenes with a fade to or from black.
E
Fade Trigger (FADE-T)
Wipe (WIPE)
Corner Wipe (CORNER)
Jump (JUMP)
Flip (FLIP)
Puzzle (PUZZLE)
Zigzag (ZIGZAG)
Beam (BEAM)
Tide (TIDE)
63
Effects ( 66)
Add flavor to your recordings.
Art (ART)
Black and White (BLACK Sepia (SEPIA)
& WHITE)
Mosaic (MOSAIC)
Ball (BALL)
Cube (CUBE)
Wave (WAVE)
Color Mask (COLOR
MASK)
Mirror (MIRROR)
Multi-Image Screen ( 66)
Captures moving subjects in 4, 9 or 16 sequences of still images and displays them at
one time. Sound will be recorded normally.
4 Sequences
9 Sequences
16 Sequences
64
Availability of Digital Effects by Operating Modes:
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
Still
Movies
E
Images
Faders
Effects
*
Multi-image
screen
: Available : Not available
* : Black and White only.
Selecting a Fader
In CAMERA mode, set the program selector to
.
CARD CAMERA
CARD PLAY
CAMERA PLAY (VCR)
1. Open the menu and select [D.EFFECT SETUP].
2. Select [D.E.SELECT] and set it to [FADER].
3. Select [FADER TYPE], select a setting option and
close the menu.
The name of the selected fader flashes.
CAMERA mode:
4. Fade in: In record pause mode, press the
D.EFFECTS button and begin recording by pressing
the start/stop button.
Fade out: During recording, press the D.EFFECTS
button and pause recording by pressing the start/
stop button.
The fader can be activated/deactivated by pressing the D.EFFECTS button.
PLAY (VCR) mode:
4. Fade in: In playback pause mode, press the
D.EFFECTS button and begin playback by pressing
the
Fade out: During playback, press the D.EFFECTS
/
button.
button and pause playback by pressing the
button.
The fader can be activated/deactivated by pressing the D.EFFECTS button.
/
65
Selecting an Effect
In CAMERA mode, set the program selector to
.
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
1. Open the menu and select [D.EFFECT SETUP].
2. Select [D.E.SELECT] and set it to [EFFECT].
3. Select [EFFECT TYPE], select a setting option and
close the menu.
The name of the selected effect flashes.
4. Press the D.EFFECTS button.
• The name of the selected effect stops flashing.
• The effect can be activated/deactivated by pressing the
D.EFFECTS button.
Selecting an Effect in CARD CAMERA Mode
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
1. Open the menu and select [D.EFFECT SETUP].
Select [EFFECT], set it to [BLACK&WHITE] and close
the menu.
“BLK&WHT” flashes.
2. Press the D.EFFECTS button.
• “BLK&WHT” stops flashing.
• The effect can be activated/deactivated by pressing the
D.EFFECTS button.
Using the Multi-Image Screen
You can operate the multi-image screen only in the following playback modes:
• When [M.S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse
playback
• When [M.S.SPEED] is set to [FAST], [MODERATE] or [SLOW]: Playback pause
In CAMERA mode, set the program selector to
.
66
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
1. Open the menu and select [D.EFFECT SETUP].
2. Select [D.E.SELECT] and set it to [MULTI-S].
E
3. Select [M.S.SPEED] and select the transition speed.
Following transition speeds can be selected: fast (every 4
frames), moderate (every 6 frames*), slow (every 8 frames*).
* In Low Light mode: moderate (every 8 frames), slow (every 12 frames).
4. Select [M.S.SPLIT], select the number of sequences and close the
menu.
“MULTI-S“ flashes.
5. Press the D.EFFECTS button.
• MANUAL: Images will be captured each time you press the
D.EFFECTS button. The blue frame indicating the next
sequence disappears after the last image. Pressing the
D.EFFECTS button for more than 1 second cancels the
images one after another.
• FAST, MODERATE, SLOW: The set number of images will be captured at the set
speed. To cancel the multi-image screen, press the D.EFFECTS button.
6. Press the start/stop button to begin recording.
The multi-image screen is recorded on the tape.
Turn off the digital effect when you do not use it.
The camcorder retains the setting even if you turn it off or change the program
AE mode.
The image quality may be slightly lower with digital effects.
Digital effects cannot be used in the following cases:
- When the program selector is set to EASY.
- During DV dubbing.
Faders cannot be used when Card Mix is activated.
About the multi-image screen:
The multi-image screen cannot be used in the following cases:
- In the night modes.
- When the widescreen mode is selected.
- When Card Mix is activated.
In PLAY (VCR) mode: Pressing any tape operation button (such as play or
pause), or performing date search cancels the multi-image screen.
67
Widescreen TV Recording (16:9)
The camcorder uses the full width of the CCD providing high-resolution 16:9 recording.
WIDESCREEN button
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
Press the WIDESCREEN button.
• “ ” appears.
• The LCD screen switches to the "letterbox" display. The picture
on the viewfinder appears horizontally squeezed.
When you turn off the image stabilizer, you will get a larger horizontal angle of
view.
The multi-image screen cannot be used when the widescreen mode is selected.
Simultaneous recording on a memory card cannot be used when the
widescreen mode is selected.
If you play back a widescreen recording on a normal TV, the image appears
horizontally squeezed.
If you connect the camcorder to a TV with Video ID-1 system, recordings made
in the widescreen mode will be automatically played back in widescreen mode.
68
Playback
Magnifying the Image
The playback image can be magnified up to 5 times.
E
SET dial
Zoom lever
CAMERA
CARD CAMERA
PLAY (VCR)
CARD PLAY
1. Move the zoom lever toward T.
• The image is magnified by 2 times.
• A frame appears indicating the position of the magnified area.
• To further enlarge the image, move the zoom lever toward T.
To shrink the image below 2 times magnification, move the
zoom lever toward W.
2. Select the magnified area with the SET dial.
• Turn the SET dial to move the image to the right and left, or up
and down. Pressing the SET dial switches between the
directions.
• To cancel the magnification, move the zoom lever toward W
until the frame disappears.
Movies played back from a memory card cannot be magnified.
69
Displaying the Data Code
The camcorder maintains a data code containing recording date and time and other
camera data such as shutter speed and exposure (f-stop). When you play back a tape,
you can display the data code and select the data code combination you wish to display.
SET dial
MENU button
DATA CODE button
Selecting the Date/Time Display Combination
CAMERA
CARD CAMERA
PLAY (VCR)
CARD PLAY
MENU
38)
DISPLAY SETUP/
D/TIME SEL.••DATE & TIME
(
Open the menu and select [DISPLAY SETUP/ ]. Select [D/TIME SEL.],
set it to [DATE] or [TIME] and close the menu.
Selecting the Data Code Display Combination
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
MENU
38)
DISPLAY SETUP/
DATA CODE••••DATE/TIME
(
Open the menu and select [DISPLAY SETUP/ ]. Select [DATA CODE],
set it to [CAMERA DATA] or [CAM. & D/T] and close the menu.
70
Displaying the Data Code
CAMERA
CARD CAMERA
PLAY (VCR)
CARD PLAY
E
Press the DATA CODE button.
The data code will not display the next time you turn on the camcorder.
Only date and time appear in CARD PLAY mode.
Six-Second Auto Date
Date and time appear for 6 seconds when you begin playback, or to indicate that date or
time zone has changed.
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
MENU
38)
DISPLAY SETUP/
6SEC.DATE••••OFF
(
Open the menu and select [DISPLAY SETUP/ ]. Select [6SEC.DATE], set
it to [ON] and close the menu.
71
End Search
When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
END SEARCH button
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
In stop mode, press the END SEARCH button.
• “END SEARCH” appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of the
recording and stops the tape.
• Pressing the button again cancels the search.
End search cannot be used once you unload the cassette.
End search may not work properly if a blank section exists on the tape.
You cannot use end search to locate the editing end of audio dubbing.
72
Returning to a Pre-marked Position
If you wish to return to a particular scene
later, mark the point with the zero set memory
and the tape will stop at that point when you
E
PLAY
button
REW
button
rewind/fast forward the tape.
This function is operated with the wireless
controller.
STOP
button
ZERO SET
MEMORY
button
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
STOP
PAUSE
SLOW
ZERO SET
• “0:00:00 ” appears.
AUDIO DUB. MEMORY
TV SCREEN
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, rewind the tape.
• “
RTN” appears.
• The tape stops automatically at “0:00:00”.
• The tape counter changes to time code.
The zero set memory may not function correctly when the time code has not been
recorded consecutively.
73
Date Search
You can locate the change of the date/time
zone with the date search function.
This function is operated with the wireless
controller.
DATE SEARCH
buttons
/
STOP
button
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
Press the
or
button to begin searching.
CARD
• Press more than once to search for further date changes (up to
10 times).
DATE SEARCH
REW
PLAY
STOP
FF
• Press the STOP
button to stop searching.
A recording of longer than a minute per date/area is required.
Date search may not function if the data code is not correctly displayed.
74
Other Functions
Customizing the Camcorder
You can personalize your camcorder by customizing the start-up image and the sound it
makes for start-up, shutter, operation and self-timer (collectively called the My Camera
settings).
E
Changing the My Camera Settings
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
MY CAMERA
SEL.S-UP IMG•CANON LOGO
(
S-UP SOUND•••DEFAULT
SHTR SOUND•••DEFAULT
OPER.SOUND•••DEFAULT
SELF-T SOUND•DEFAULT
1. Open the menu and select [MY CAMERA].
2. Select the menu item you wish to change.
When selecting a start-up image, set the camcorder to CARD PLAY mode.
3. Select a setting option and close the menu.
You can save your original images, or the images and sounds contained in the
supplied software (ZoomBrowser EX for Windows or ImageBrowser for
Macintosh) to the setting options [MY IMAGE] and [MY SOUND]. For details,
refer to the Digital Video Software Instruction Manual.
You can also create original start-up images (
117).
75
Changing the Display Language
The language used for screen display and menu items can be changed. The available set
of languages varies depending on the region. Follow the procedure below to check which
set of languages are provided with your camcorder.
Language Set A
(e.g. USA, Canada)
Language Set B
(e.g. Asia)
English, German, Spanish, French, Italian,
Russian, Simplified Chinese, Japanese
English, Simplified Chinese, Traditional
Chinese, Korean
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
DISPLAY SETUP/
LANGUAGE
•••ENGLISH
(
To change the display language, open the menu and select [DISPLAY
SETUP/ ]. Select [LANGUAGE ], select a language and close the
menu.
If you have mistakenly changed the language, follow the
menu item to change the setting.
mark next to the
The displays “
” and “
” at the bottom of the screen refer to the
button names on the camcorder and will not change when you change the
language.
Changing the Date Format
You can select between three date formats. For example, [JAN. 1, 2005], [1. JAN. 2005]
and [2005. 1. 1].
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
DISPLAY SETUP/
DATE FORMAT••JAN. 1,2005
(
Open the menu and select [DISPLAY SETUP/ ]. Select [DATE FORMAT],
select a format and close the menu.
76
Other Camcorder Settings
Beep
You will hear a beep upon camcorder operations such as power on/off, start/stop, self-
timer countdown, and unusual conditions of the camcorder.
E
If you turn off the beep, all camcorder sounds including the ones of the My Camera
settings will be turned off.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
SYSTEM
BEEP•••••••••ON
(
To turn the beep off, open the menu and select [SYSTEM]. Select [BEEP],
set it to [OFF] and close the menu.
Adjusting the Brightness of the LCD Screen
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
DISPLAY SETUP/
BRIGHTNESS•••
(
Open the menu and select [DISPLAY SETUP/ ]. Select [BRIGHTNESS],
adjust the brightness level and close the menu.
Changing the brightness of the LCD screen does not affect that of the viewfinder
or the recordings.
Turning the Remote Sensor Off
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
SYSTEM
WL.REMOTE••••ON
(
Open the menu and select [SYSTEM]. Select [WL.REMOTE], set it to
[OFF ] and close the menu.
” appears.
“
77
Turning Off the Image Stabilizer
The image stabilizer compensates for camcorder shake even at full telephoto. It tries to
compensate for horizontal movements; therefore, you may decide to turn it off when you
mount the camcorder on a tripod.
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
MENU
38)
CAMERA SETUP
IMG STAB
•••ON
(
Open the menu and select [CAMERA SETUP]. Select [IMG STAB
it to [OFF] and close the menu.
], set
“
” disappears.
The image stabilizer cannot be turned off when the program selector is set to
EASY.
The image stabilizer is designed to compensate a normal degree of camcorder
shake.
The image stabilizer might not be as effective when using the night modes.
Demonstration Mode
The demonstration mode displays the camcorder’s main features. It starts automatically
when you leave the camcorder turned on without loading a recording media for more than
5 minutes. However, you can set the camcorder not to start the demonstration mode.
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
DISPLAY SETUP/
DEMO MODE••••ON
(
Open the menu and select [DISPLAY SETUP/ ]. Select [DEMO MODE],
set it to [OFF] and close the menu.
To cancel the demo mode once it has begun, press any button, turn off the
camcorder or load a recording media.
78
Editing
Recording to a VCR or Digital Video
Device
E
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no
generation loss in image and sound quality.
Connecting the Devices
Connecting a VCR
See Playing Back on a TV Screen (
36).
Connecting a Digital Video Device
Refer also to the instruction manual of the digital video device.
Signal flow
Commercially available DV cable
Recording
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
If you are connecting via AV terminal, check the setting ( 36).
2. Connected device: Load a blank cassette and set the device to record
pause mode.
3. Locate the scene you wish to copy and pause playback shortly before
the scene.
4. Play back the tape.
5. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
6. Stop playback.
79
When connecting a VCR, the quality of the edited tape will be slightly lower than
that of the original.
When connecting a digital video device:
- If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
- Proper operation cannot be guaranteed for all digital video devices equipped
with a DV terminal. If operation does not work, use the AV terminal.
We recommend powering the camcorder from a household power source.
80
Recording from Analog Video
Devices (VCR, TV or Camcorder)
E
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Connect the camcorder to the analog video device.
See Playing Back on a TV Screen ( 36).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
6. Press the
record appears.
/
button when the scene you wish to
Recording starts.
7. Press the
• Press the
button to stop recording.
button to pause recording.
/
/
• Press the
button again to restart recording.
8. Connected device: Stop playback.
Headphones cannot be used during analog line-in recording.
Depending on the signal sent from the connected device, dubbing may not work
properly (e.g. signals that include copyright protective signals or anomalous
signals such as ghost signals).
We recommend powering the camcorder from a household power source.
81
Recording from Digital Video Devices
(DV Dubbing)
You can record from other digital video devices equipped with a DV terminal with virtually
no loss in picture and sound quality.
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device ( 79).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
Make sure that [AV DV] is set to [OFF] ( 84).
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the
record appears.
/
button when the scene you wish to
Recording starts.
7. Press the
• Press the
button to stop recording.
button to pause recording.
/
/
• Press the
button again to restart recording.
8. Connected Device: Stop playback.
Blank sections may be recorded as anomalous picture.
If the picture does not appear, reconnect the DV cable or turn the camcorder off
and back on again.
You can only record signals from devices with the
system in SP or LP format. (note that signals from identically shaped terminals
may be of different format 148).
logo recording in SD
We recommend powering the camcorder from a household power source.
Copyright Signal
Certain software tapes are copyright protected. If you attempt to play back such tape,
“COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears and you will not be
able to view the contents of the tape. If you attempt to record from such tape via the DV
terminal, “COPYRIGHT PROTECTED DUBBING RESTRICTED” appears and you will
not be able to record the contents of the tape.
82
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
E
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Refer also to the instruction manual of the connected device.
VIDEO
L
Signal flow
AUDIO
R
STV-250N Stereo Video
Cable (supplied)
Signal flow
Commercially available DV cable
83
Turning On the Analog-Digital Converter
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
MENU
38)
VCR SETUP
AV
DV••••••••OFF
(
Open the menu and select [VCR SETUP]. Select [AV DV], set it to [ON]
and close the menu.
Headphones cannot be used during analog-digital conversion.
Depending on the signal sent from the connected device, the conversion from
analog to digital signals might not work properly (e.g., signals that include
copyright protective signals or anomalous signals such as ghost signals).
For normal use, set [AV DV] to [OFF]. If it is set to [ON], digital signals cannot
be input via the camcorder’s DV terminal.
Depending on the software and the specifications of your computer, you may
not be able to transfer converted signals via the DV terminal.
We recommend powering the camcorder from a household power source.
84
Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in microphone
(MIC.IN). With the ELURA90/ELURA85, you can also use an external microphone
(MIC.IN).
E
This function is operated with the wireless controller.
Connecting
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
OUTPUT
Signal flow
AUDIO
L
STV-250N Stereo Video Cable
(supplied)
R
Connecting a Microphone
See Recording with an External Microphone (
62).
Dubbing
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
MENU
38)
AUDIO SETUP
AUDIO DUB.•••AUDIO IN
(
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set it
to [AUDIO IN] or [MIC.IN] and close the menu.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE
controller.
button on the wireless
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
85
5. Press the AUDIO DUB. button on the wireless
controller.
PAUSE
SLOW
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
“AUDIO DUB.” and “
” appear.
6. Press the PAUSE button on the wireless controller
to begin dubbing.
• Audio device: Begin playback.
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
• Microphone: Speak into the microphone.
7. Press the STOP
to stop dubbing.
Audio device: Stop playback.
button on the wireless controller
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. MEMORY
TV SCREEN
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
When using the built-in microphone, do not connect any
devices to the MIC terminal.
You cannot use the DV terminal for audio dubbing.
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
You can check the picture on the LCD screen.
When you connect an audio device, check the sound via built-in speaker or
audio device.
When you use a microphone, you can check the picture on a TV connected via
the AV terminal and the sound via headphones connected to the TV.
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.
86
Playing Back the Added Sound
You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
E
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
MENU
38)
AUDIO SETUP
12bit AUDIO•••STEREO1
(
1. Open the menu and select [AUDIO SETUP]. Select [12bit AUDIO],
select a setting and close the menu.
• STEREO1: Plays back the original sound.
• STEREO2: Plays back the added sound.
• MIX/FIXED: Plays back Stereo 1 and Stereo 2 in the same level.
• MIX/VARI.: Plays back Stereo 1 and Stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix level: Open the menu
and select [AUDIO SETUP]. Select [MIX BALANCE], adjust the balance
with the SET dial and close the menu.
Turn the SET dial down to increase the volume of Stereo 1 and up to increase the
volume of Stereo 2.
The camcorder resets to [STEREO1] when you turn the camcorder off. However,
the mix balance is memorized by the camcorder.
87
Transferring Video Recordings to a
Computer (IEEE1394)
You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or
IEEE1394 capture board. Use the editing software supplied with your computer/capture
board to transfer video recording from tape to computer. Refer to the instruction manual of
the software. A driver is preinstalled on Windows operating systems later than Windows
98 Second Edition and Mac operating systems later than Mac OS 9, and will be installed
automatically.
IEEE1394 (DV) terminal
Commercially available DV cable
6-pin
4-pin
Operation may not work correctly depending on the software and the
specifications/settings of your computer.
If the computer freezes while you have connected the camcorder, disconnect
and reconnect the DV cable. If the problem persists, disconnect the interface
cable, turn off camcorder and computer, turn camcorder and computer back on
and reconnect them.
Before connecting the camcorder to the computer using a DV cable, make sure
that camcorder and computer are not connected with a USB cable, and that no
other 1394 device is connected to the computer.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the instruction manual of the computer.
88
Using
a
Memory Card
Inserting and Removing a Memory
Card
E
You can use
SD Memory Cards or
Terminals
commercially available MultiMediaCards with
this camcorder. The SD Memory Card has a
protect switch to prevent accidental erasure.
Inserting the Card
1. Turn off the camcorder.
2. Open the cover.
3. Insert the memory card all the way
into the memory card slot.
4. Close the cover.
Do not close the cover forcefully without
having the card correctly inserted.
Removing the Card
Do not forcefully remove the memory card without first pushing it in.
1. Turn off the camcorder.
Make sure that the card access indicator
is not flashing before you turn off the
camcorder.
2. Open the cover.
3. Push the memory card to release
it. Remove the memory card.
4. Close the cover.
Card access indicator
This camcorder is compatible with SD Memory Cards or MultiMediaCards only.
Do not use any other types of memory cards.
Proper operation cannot be guaranteed for all memory cards.
Turn off the camcorder before inserting or removing the memory card.
Otherwise, it may result in data damage.
If you use memory cards other than the supplied one, make sure to format them
with the camcorder (
116).
89
Selecting the Image Quality/Size
Changing the Still Image Quality
You can choose from Superfine, Fine and Normal.
CAMERA
CARD PLAY
PLAY (VCR)
CARD CAMERA
MENU
38)
CARD SETUP
IMG QUALITY••FINE
(
Open the menu and select [CARD SETUP]. Select [IMG QUALITY], set it to
[SUPER FINE] or [NORMAL] and close the menu.
Changing the Still Image Size
You can choose from 1280 x 960 pixels and 640 x 480 pixels.
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
MENU
38)
CARD SETUP
IMAGE SIZE•••1280x960
(
Open the menu and select [CARD SETUP]. Select [IMAGE SIZE], set it to
[640x480] and close the menu.
Still images are recorded with JPEG (Joint Photographic Experts Group)
compression.
Estimated Capacity of an 8 MB Memory Card:
Image Size
1280 x 960
640 x 480
No. of
Images
File Size
per Image
No. of
Images
File Size
per Image
Image Quality
Superfine
Fine
6
850 KB
550 KB
300 KB
34
175 KB
120 KB
65 KB
10
18
50
Normal
84
These figures are approximate. They vary according to the recording condition and
the subject.
90
Changing the Movie Size
You can choose between 320 x 240 pixels and 160 x 120 pixels.
CAMERA
CARD PLAY
PLAY (VCR)
CARD CAMERA
E
MENU
38)
CARD SETUP
MOVIE SIZE...320x240
(
Open the menu and select [CARD SETUP]. Select [MOVIE SIZE], set it to
[160x120] and close the menu.
Movies are recorded with Motion JPEG compression.
Maximum recording time on a 8 MB SD Memory Card:
Recording Time
(8 MB)
Image Size
File Size per Second
320 x 240
160 x 120
approx. 20 sec.
approx. 50 sec.
250 KB/sec.
120 KB/sec.
91
File Numbers
Images are automatically assigned file numbers from 0101 to 9900 and stored in folders
containing up to 100 images. Folders are assigned numbers from 101 to 998.
You can choose to use consecutive file numbers (CONTINUOUS) or to reset the file
number each time a different memory card is inserted (RESET). We recommend setting
the file numbers to CONTINUOUS.
RESET
The file number will be reset each time a new memory card is
inserted. If the memory card already contains image files, the
consecutive file number will be assigned.
CONTINUOUS
The camcorder memorizes the file number of the last image and
assigns the consecutive file number to the next image, even
when a new memory card is inserted. (If a higher file number
already exists on the memory card, the consecutive number will
be assigned.) There will be no duplication of file numbers. This
is useful for organizing images on a computer.
Example:
When you record 3 images.
101-0101
101
CONTINUOUS
RESET
101-0102
101-0103
When you replace the memory card
and record an image.
101
101-0104
101
101-0101
CAMERA
CARD PLAY
PLAY (VCR)
CARD CAMERA
MENU
38)
CARD SETUP
FILE NOS.••••CONTINUOUS
(
To change the setting, open the menu and select [CARD SETUP]. Select
[FILE NOS.], set it to [RESET] and close the menu.
92
Recording Still Images on a Memory
Card
E
You can record still images with the camcorder, from a tape in the camcorder or from
devices connected via the DV terminal or AV terminal. You can also record a still image
on the memory card while you record a movie on the tape.
PHOTO button
Program selector
Card access indicator
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
1. Set the camcorder to CARD CAMERA mode.
A white focusing frame appears in the center of the screen. The camcorder will focus
on the subject in the center of the screen. To change the focusing point, see Selecting
the Focusing Point (
103).
2. Press the PHOTO button halfway.
•
and focusing frame turn green when focus is adjusted. The
beep sounds twice. The picture may appear out of focus for a
moment while the camcorder is focusing.
• Exposure is locked.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
•
and focusing frame disappear and you hear a shutter
sound.
• The card access indicator flashes and the card access display
appears.
• The still image shown on the screen will be recorded on the memory card.
Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.
When you are using a SD Memory Card, make sure that the protect switch is
set to allow recording.
93
Depending on the number of images on the memory card (Windows: more than
1800 images; Macintosh: more than 1000 images), you may not be able to
download images to a computer. In such case, use a PC card reader.
Connection to a PictBridge compliant printer will not work when the memory
card contains more than 1800 images. For best performance, we recommend
to keep the number of images on the memory card less than 100.
When the subject is too bright, the ND filter turns on automatically (“ND”
appears on the screen). If it is still too bright, “OVEREXP” starts flashing. In
such case, use the optional FS-34U ND filter. If you wish to turn off the ND filter:
Open the menu and select [CAMERA SETUP]. Select [ND], set it to [OFF] and
close the menu.
When the Focus-Priority mode is set to [ON]:
When you press the PHOTO button fully before
and focusing frame turn
green, it may take up to 2* seconds until focus is adjusted and the still image
can be recorded to the memory card.
* Up to 4 seconds in the Low Light and the night modes.
If the subject is not suitable for autofocus, the focusing frame turns yellow and
locks the focus. Adjust the focus manually with the SET dial.
When the Focus-Priority mode is set to [OFF]:
No focusing frame appears.
In step 2,
The camcorder shuts off when you do not operate it for 5 minutes to save
power. “ AUTO POWER OFF” appears 20 seconds before shutoff. To
turns green, and focus and exposure are locked.
continue recording, turn the POWER switch to OFF and then back to CAMERA.
Screen Displays during Still Image Recording
Remaining Card Capacity for Still
Images
flashing in red: No card
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images
• The indication may not decrease even
though a recording has been made, or
may decrease by 2 images at once.
• All indicators are displayed in green
when a memory card is played back.
Still Image Quality
“
” Card Access Display
Indicates the image quality of the still
image.
Indicates that the camcorder is writing
on the memory card.
Image Size
Indicates the still image size.
94
Recording a Still Image on a Memory Card While
Recording Movies on a Tape
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card. Select the image quality from normal or fine.
E
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
MENU
38)
CAMERA SETUP
STILL I.REC••OFF
(
1. Open the menu and select [CAMERA SETUP]. Select [STILL I.REC], set
it to [ FINE] or [ NORMAL] and close the menu.
2. While you are recording a movie, press the PHOTO button.
The size of the still image will be 640 x 480.
The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
The still image cannot be recorded on a memory card when the widescreen
mode is selected.
“
” appears when you press the PHOTO button when [STILL I.REC] is
set to [OFF].
Recording from a Tape in the Camcorder
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other
information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape
is in playback pause mode.
95
Recording from Other Video Devices
You can record images from devices connected via the AV terminal (analog line-in
function), or via the DV terminal as still images on a memory card. For connecting
instructions, refer to page 36 and 79.
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure that the tape is stopped.
• When recording via the AV terminal, make sure that “AV DV” is displayed on the
screen. When recording via the DV terminal, make sure that “AV DV” is not
displayed. Change the setting as necessary (
84).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
4. Press the PHOTO button fully.
The card access indicator flashes.
When recording from a tape in the camcorder or other video devices:
- A still image recorded from an image in widescreen mode will be vertically
compressed.
- The data code of the still image will reflect the date and time it has been
recorded on the memory card.
- The size of the still image will be 640 x 480. The still image quality can be
selected.
When connecting with a DV cable, make sure that no USB cable is connected
to the camcorder.
96
Using the Flash
You can use the built-in flash for recording still images in dark places. The flash is
equipped with the red-eye reduction mode.
E
PHOTO button
(flash) button
Flash
Assist lamp
Selecting the Flash Mode
(auto)
The flash fires automatically according to the brightness
of the subject.
(red-eye reduction, auto) The flash fires automatically according to the brightness
of the subject and the assist lamp lights up to reduce
the red-eye effect.
(flash on)
(flash off)
The flash always fires.
The flash does not fire. Use this setting in places where
flash photography is prohibited.
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
Press the (flash) button.
• The setting changes with each press of the button.
• The symbol of the selected flash mode appears on the screen.
“
” disappears after 4 seconds.
97
Recording with Flash
1. Press the PHOTO button halfway.
• “ ” appears in green.
• In CAMERA mode, the flash can be used in record pause
mode when [STILL I.REC] is set to [
NORMAL].
FINE] or
[
2. Press the PHOTO button fully.
The flash fires.
Do not fire the flash close to people’s eyes.
Do not fire the flash at persons while they are driving.
Do not fire the flash with the flash bulb covered with your hand.
The practical range of the flash is approx. 1 to 2 m (3.3 to 6.6 ft.). The range
depends upon the recording condition.
The range of the flash decreases in continuous shooting mode.
A pre-flash is fired to obtain the subject’s exposure data to adjust the main flash
to the optimal intensity (flash exposure compensation).
For the red-eye reduction mode to be effective, the subject needs to look at the
assist lamp. The degree of reduction depends upon the distance and on each
individual.
The flash will not fire in the following cases:
- When you press the EXP button in
mode.
(auto) or
(red-eye reduction, auto)
- When recording movies on a tape.
- When [STILL I.REC] is set to [OFF] in CAMERA mode.
- When a shutter speed of 1/2000 is set in
auto) and in CAMERA mode.
(auto) or
(red-eye reduction,
- When the multi-image screen is selected.
- During auto exposure bracketing.
- When an abnormality occurs during charging.
When (flash on) is selected and a shutter speed of 1/2000 is set in CAMERA
mode, the shutter speed becomes set to 1/1000 and the flash fires.
We recommend not using the flash when the wide attachment (supplied with
the ELURA90), the optional Wide-converter or Tele-converter is attached. Their
shadows appear on the screen.
The flash mode cannot be selected when exposure is locked, or after the first
still image in Stitch Assist mode.
The red-eye reduction mode cannot be used in stitch assist mode.
About the AF-Assist Lamp:
While the PHOTO button is pressed halfway, the assist lamp may light up as
AF-assist lamp responding to the brightness of the subject to enable the
camcorder to focus more accurately.
- The camcorder may not be able to focus even though the AF-assist lamp is
lighting.
- The AF-assist lamp lights up brightly. Consider turning off the AF-assist lamp
in public places such as in restaurants or theaters.
98
Reviewing a Still Image Right after
Recording
E
You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been
recorded.
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
MENU
38)
CAMERA SETUP
REVIEW•••••••2sec
(
Open the menu and select [CAMERA SETUP]. Select [REVIEW], select a
setting option and close the menu.
A still image is displayed as long as you hold the PHOTO button after recording.
The FILE OPER. menu appears when you press the SET dial while you are
reviewing a still image, or when you press the SET dial right after recording. In
this menu, you can protect (
[REVIEW] cannot be selected when
continuous shooting) or
110) or erase (
111) the image.
(continuous shooting),
(high-speed
(auto exposure bracketing) is selected.
99
Recording Motion JPEG Movies on a
Memory Card
You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or
from devices connected via the DV terminal or the AV terminal. The sound of a movie
recorded on a memory card will be monaural.
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
1. Press the start/stop button to begin recording.
With SD Memory Cards up to 512 MB, you can record until
“CARD FULL” appears (approx. 33 minutes in 320 x 240 with a
512 MB SD Memory Card). With MultiMediaCards, the recording
time is limited to 10 sec. in 320 x 240 pixels and 30 sec. in 160 x
120 pixels.
2. Press the start/stop button to stop recording.
Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.
When you are using a SD Memory Card, make sure that the protect switch is
set to allow recording.
Do not load/unload a cassette during recording.
We recommend using a Canon SD Memory Card, or a SD Memory Card with a
transfer rate of more than 2 MB/sec., right after you have formatted it with this
camcorder. With memory cards not formatted with this camcorder, or when
recording/erasing has been repeatedly performed, the writing speed may be
lower and recording may stop.
You can select the focusing point when recording a movie on the memory card.
Users of Windows XP: When you plan to connect the camcorder to a computer
using a USB cable, keep the length of one movie shorter than approx. 12 min.
in 320 x 240 and 35 min. in 160 x 120.
The recording time varies according to the movie size, the recoding condition
and the subjects.
100
Screen Displays during Movie Recording
Image Size
E
Indicates the movie size.
Remaining Card Capacity for
Movies
Indicates the remaining time in hours
and minutes. At less than 1 minute, the
remaining time will be displayed in 10
second-steps, at less than 10 seconds
in 1 second-steps.
Card Access Display
” appears and “ ” moves to
• The indication varies depending on
the recording condition. The actual
remaining time may be longer or
shorter than indicated.
“
indicate that the camcorder is writing on
the memory card.
Movie recording time
Indicates the recording time of the
movie.
Recording from a Tape in the Camcorder
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Play back the tape.
2. Press the start/stop button when the scene you wish to record
appears.
3. Press the start/stop button to stop recording.
Recording from Other Video Devices
You can record movies from devices connected via the AV terminal (analog line-in
function), or via the DV terminal on a memory card. For connecting instructions, refer to
page 36 and 79.
CAMERA
CARD CAMERA
CARD PLAY
PLAY (VCR)
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure the tape is stopped.
• When recording via the AV terminal, make sure that “AV DV” is displayed on the
screen. When recording via the DV terminal, make sure that “AV DV” is not
displayed. Change the setting as necessary (
84).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the start/stop button when the scene you wish to record
appears.
4. Press the start/stop button to stop recording.
101
When recording from a tape in the camcorder or other video devices:
A movie recorded from an image in widescreen mode will be vertically
compressed.
The data code of the movie will reflect the date and time it has been recorded
on the memory card.
102
Selecting the Focusing Point
The subject you wish to record is not always in the center of the screen. In the Focus-
Priority mode, you can choose from one of three focusing points to automatically put the
subject you wish into sharp focus.
E
When the program selector is set to EASY, the Focus-Priority becomes set to ON (only
the center focusing point is available).
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
1. Set the program selector to
.
2. Turn the SET dial to display all focusing frames.
Three focusing frames appear on the screen, one of it in green.
3. Turn the SET dial to select the focusing point.
Turn the SET dial up to select the frame to the right, down to select the frame to the
left.
The focusing frame gives an indication of the focusing point. Depending on the
size of the subject or the distance, the camcorder may focus outside the frame.
When you operate the zoom lever, the frames other than the selected one
disappear.
The focusing point can be selected only when Focus-Priority is set to [ON] in
CARD CAMERA mode.
The focusing point returns to the center if you turn off the camcorder, change
from CARD CAMERA mode or move the program selector to EASY.
The focusing point cannot be selected in the following cases:
- When using the digital zoom.
- When exposure is locked.
- In Stitch Assist mode.
Turning Off the Focus-Priority Mode
Turn off the Focus-Priority mode if you wish to put timing ahead of focus.
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
MENU
38)
CAMERA SETUP
FOCUS PRI.•••ON
(
Open the menu and select [CAMERA SETUP]. Select [FOCUS PRI.], set it
to [OFF] and close the menu.
103
Selecting the Drive Mode
Continuous
Shooting
Captures a quick series of still images while you press the PHOTO button.
For the number of frames per second, refer to the following table.
High-Speed
Continuous Shooting
AEB (Auto
Exposure Bracketing)
The camcorder records a still image in three different exposures (dark,
normal, light in 1/2 EV steps), allowing you to choose the perfect exposed
shot.
Single
Records a single still image when you press the PHOTO button.
PHOTO button
Program selector
DRIVE MODE button
Changing the Drive Mode
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
1. Set the program selector to
.
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button.
Maximum number of continuous shots at one time:
Frames per Second
Maximum Number
of Continuous Shots
Still Image Size
Normal speed
High speed
5 frames
5 frames
1280 x 960
640 x 480
3 frames
3 frames
10 images
60 images
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
The number of frames per second will be lower when “
warning) is displayed on the screen.
” (camcorder shake
In normal and high-speed continuous shooting mode, images are captured at 2
frames/second when using the flash.
104
Auto Exposure Bracketing
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
E
Press the PHOTO button.
Three still images in different exposures are recorded to the memory card.
Make sure that there is sufficient space on the memory card.
105
Recording Panoramic Images (Stitch
Assist Mode)
You can shoot a series of overlapping images and merge them into one large panoramic
scene using the supplied software (PhotoStitch) on a computer.
PHOTO button
button
CARD +/– button
When Recording in Stitch Assist Mode:
PhotoStitch detects the overlapping portion of adjoining images and merges them. Try to
include a distinctive item (landmark, etc.) in the overlapping portion.
CAMERA
PLAY (VCR)
CARD PLAY
CARD CAMERA
1. Press the
button.
2. Select the direction with the CARD +/– button.
CARD + button: clockwise. CARD – button: counterclockwise.
3. Select the program AE mode and zoom on the subject.
Adjust focus and exposure manually as necessary. Once the sequence has started,
you cannot change the program AE mode, exposure, zoom or focus.
4. Press the PHOTO button to record the first image.
Direction and number of recorded images appear.
106
5. Record the second image so that it overlaps a portion of the first
image.
• Minor discrepancies in the overlapped area can be corrected with the software.
• You can retake an image by pressing the CARD +/– button to return to the previous
image.
E
• A maximum of 26 images can be recorded.
6. Press the button after the last image.
For details on how to merge these images, refer to the Digital
Video Software Instruction Manual.
Compose each image so that it overlaps 30 to 50% of the adjoining image. Try
to keep the vertical misalignment within 10%.
Do not include a moving subject in the overlapping portion.
Do not try to stitch images that include both distant and close subjects. They
may appear warped or doubled up.
107
Playing Back a Memory Card
You can display a single image, 6 at one time (index screen
109), or one after another
(slide show
109). Use the Card Jump function to quickly locate an image without
displaying them one by one ( 109).
CARD +/– button
/
button
button
SLIDE SHOW button
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Set the camcorder to CARD PLAY mode.
2. Press the CARD +/– button to move between
images.
3. To play back a movie, press the
/
button.
• The first scene appears as a still image when playback is
complete.
• Pressing the
playback. Press the
• Pressing the button displays the first scene of the movie.
• Press the CARD +/– button (or the REW /FF button on the wireless
controller) for 8x fast forward/fast rewind playback.
/
button during playback pauses the
/
button again to restart playback.
Images not recorded with this camcorder, uploaded from a computer (except
the sample images 114), edited on a computer and images whose file
names have been changed may not be played back correctly.
Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.
108
Slide Show
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
E
1. Press the SLIDE SHOW button.
Images are played back one after another.
2. Press the SLIDE SHOW button to stop the slide
show.
Index Screen
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Move the zoom lever toward W.
• Up to 6 images appear.
• With movies, the index screen can only be started when the
first scene is displayed as a still image.
2. Turn the SET dial to select an image.
• Move the “
” to the image you wish to view.
• You can switch between the index pages by pressing the
CARD + or CARD – button.
3. Move the zoom lever toward T.
The index screen is canceled and the selected image is
displayed.
Card Jump Function
You can locate images without displaying them one by one. The number in the upper right
of the screen indicates the image number of the current image by the total number of
images.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
Press and hold the CARD + or CARD – button.
• When you release the button, the image of the displayed image
number appears.
• With movies, the card jump function can only be started when the
first scene is displayed as a still image.
109
Protecting Images
You can protect important images from accidental erasure when displaying a single image
or index screen.
If a memory card is formatted, all still images and movies, even protected ones,
will be erased permanently.
Movies can only be protected when the first scene is displayed as a still image.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Select the image you wish to protect.
2. Press the SET dial to open the FILE OPER. menu.
In CARD CAMERA mode, the menu appears when you press the SET dial while you
are reviewing a still image, or when you press the SET dial right after recording.
3. Select [ PROTECT].
• “ ” appears and now the image cannot be erased.
• To cancel the protection, press the SET dial.
4. Select [ RETURN] to close the menu.
Protecting during Index Screen Display
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
PROTECT
(
1. Move the zoom lever toward W.
• Up to 6 images appear.
• Select the image you wish to protect.
2. Open the menu and select [CARD OPERATIONS]. Select [
PROTECT] and press the SET dial.
• “
” appears on the image.
• To cancel the protection, press the SET dial.
3. Close the menu.
110
Erasing Images
You can erase images singly or all at once.
E
Be careful when erasing images. Erased images cannot be recovered.
Protected images cannot be erased.
Movies can only be erased when the first scene is displayed as a still image.
Erasing a Single Image
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Select the image you wish to erase.
2. Press the SET dial to open the FILE OPER. menu.
In CARD CAMERA mode, the menu appears when you press the SET dial while you
are reviewing a still image, or when you press the SET dial right after recording.
3. Select [IMAGE ERASE].
• “ERASE THIS IMAGE?”, [NO] and [YES] appears.
• If an image is protected, [YES] appears in purple.
4. Select [YES].
The image is erased and the previous image appears.
5. Select [ RETURN] to close the menu.
Erasing a Single Image/All Images
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
IMAGE ERASE
(
1. Open the menu and select [CARD OPERATIONS].
2. Select [IMAGE ERASE].
3. Select [SINGLE] or [ALL].
• When erasing a single image: “ERASE THIS IMAGE?”, [NO] and [YES] appears. If
an image is protected, [YES] appears in purple.
• When erasing all images: “ERASE ALL IMAGES? [EXCEPT FOR
[NO] and [YES] appears.
IMAGES]”,
4. Select [YES] and close the menu.
• When erasing a single image: The image is erased and the previous image appears.
To erase another image, select the image with the CARD +/– button and select
[YES].
• When erasing all images: All still images or movies with exception of the protected
ones are erased.
111
Combining Images (Card Mix)
You can produce effects not possible with just a tape with the Card Mix function. Choose
one of the sample images provided on the supplied DIGITAL VIDEO SOLUTION DISK
(such as picture frames, backgrounds and animations) and combine it with the live video
recording.
Card Chroma Key (CARD CHROMA)
Combines frames with your recordings. The live video recording will appear in place of
the blue area of the card mix image.
Mix level adjustment: blue area of the still image.
Live video recording
Card mix image
Card Luminance Key (CARD LUMI.)
Combines illustrations or title with your recordings. The live video recording will appear in
place of the light area of the card mix image.
Mix level adjustment: light area of the still image.
Live video recording
Card mix image
Camera Chroma Key (CAM. CHROMA)
Combines backgrounds with your recordings. Record your subject in front of a blue
curtain, and the subject not blue will be superimposed on the card mix image.
Mix level adjustment: blue area of the live video recording.
Live video recording
Card mix image
Card Animation (C. ANIMATION)
Combines animations with your recordings. You can choose from 3 types of card
animation effects.
• Corner: Animation appears on the upper left and the lower right corner of the screen.
• Straight: Animation appears on the top and bottom of the screen and moves to the right
and left.
• Random: Animation moves randomly in the display.
112
Mix level adjustment: blue area of the card animation image.
Live video recording
Card mix image
E
Program selector
SET dial
MENU button
CARD MIX button
CARD + / – button
Selecting the Card Mix Effect
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
MENU
38)
D.EFFECT SETUP
CARD MIX
(
MIX TYPE•••••CARD CHROMA
1. Upload a sample image from the DIGITAL VIDEO SOLUTION DISK to
the memory card in the camcorder.
Refer to Adding Still Images from Your Computer to the Memory Card in the Digital
Video Software Instruction Manual.
2. Set the program selector to
.
3. Open the menu and select [D.EFFECT SETUP].
4. Select [ CARD MIX].
The card mix menu appears.
5. Select the image you wish to combine with the CARD +/– button.
6. Select [MIX TYPE].
[CARD CHROMA], [CARD LUMI.], [CAM.CHROMA] and [C.ANIMATION] appears.
7. Select the mix type matching the sample image you have selected.
• The screen shows the combined image.
• When you have selected [C.ANIMATION], select [ANIMAT.TYPE] and select
between [CORNER], [STRAIGHT] and [RANDOM].
113
8. To adjust the mix level, select [MIX LEVEL] and adjust it with the SET
dial.
9. Close the menu.
“CARD MIX” flashes.
10.Press the CARD MIX button.
• “CARD MIX” stops flashing.
• The combined image appears.
Card mix cannot be used when [STILL I.REC] is set to [
NORMAL].
FINE] or
[
Movies recorded on a memory card cannot be combined with camcorder
recordings.
Sample Images
Below are some sample images provided on the supplied DIGITAL VIDEO SOLUTION
DISK.
Card Chroma Key
Card Luminance Key
Camera Chroma Key
Card Animation
114
The sample images provided on the supplied DIGITAL VIDEO SOLUTION DISK
are intended only for the personal use with this camcorder. Do not use these
sample images for other purposes.
E
PhotoEssentials – Royalty Free Stock Photography
The PhotoEssentials suite of royalty-free images on CD-ROM features premium quality
assignment photography and is ideally suited for use in advertising, brochures, reports,
multimedia, websites, books, packaging and more.
For more information, please visit their website www.photoessentials.com
115
Formatting a Memory Card
Format new memory cards, or when you get the message “CARD ERROR”. You can also
format a memory card to erase all data recorded on it.
Formatting a memory card erases all data, including protected images.
Images erased by formatting cannot be recovered.
If you use a memory card other than the supplied one, format it with the
camcorder.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
FORMAT
(
1. Open the menu and select [CARD OPERATIONS].
2. Select [FORMAT].
[CANCEL] and [EXECUTE] appears.
3. Select [EXECUTE].
[ALL DATA WILL BE ERASED. FORMAT THIS CARD?], [NO] and [YES] appears.
4. Select [YES] and close the menu.
• Formatting starts.
• Selecting [NO] brings you back to step 3.
116
Creating a Start-up Image
You can create a start-up image using a still image on the memory card.
E
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
MY CAMERA
CREATE START-UP IMAGE
(
1. Select a still image with the CARD +/– buttons.
2. Open the menu and select [MY CAMERA].
3. Select [CREATE START-UP IMAGE].
[SET THIS AS START-UP IMAGE?], [YES] and [NO] appears.
4. Select [YES].
[OVERWRITE MY IMAGE?], [NO] and [YES] appears.
5. Select [YES].
The still image will be saved, and the image that was saved to [MY IMAGE] is erased.
Retain the original data of the still image you have set as the start-up image on
your computer or removable disk.
117
Direct Printing
Printing Still Images
You can print still images by connecting the camcorder to a printer with direct print
function. You can also use the print order settings for direct printing (
Following printers can be connected to your camcorder:
127).
Canon Printers
PictBridge compliant SELPHY CP series
printer*/Bubble Jet Printers (PIXMA
series/SELPHY DS series)
Bubble Jet Direct compatible Bubble Jet
Printer
CP-10/CP-100 CP-Printer
PictBridge compliant non-Canon Printer
*Includes the CP-330/CP-220/CP-300/CP-200.
Connecting the Printer to the Camcorder
Printer with
direct print function
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Turn off the camcorder and insert a memory card that contains still
images.
2. Turn on the printer.
3. Set the camcorder to CARD PLAY mode.
4. Connect the camcorder to the printer using the cable.
•
appears and changes to
,
or
when the printer is properly
connected to the camcorder. (Does not appear with movies, or still images that
cannot be played back with the camcorder.)
• The
(print/share) button lights up and the current print setting will be displayed
for approx. 6 seconds.
118
If
continues to flash (for more than 1 minute) or if
,
or
does not appear, the camcorder is not correctly connected to the printer. In such
case, disconnect the cable from camcorder and printer, turn off camcorder and
printer, turn both back on and reconnect the camcorder to the printer.
Do not connect the camcorder to a printer when the camcorder is set to a mode
other than the CARD PLAY mode.
E
Refer to the instruction manual of each printer for information on which interface
cable to use with the camcorder.
The Canon CP-Printers CP-10 and CP-100 are supplied with two direct
interface cables. Use the cable with the USB logo on the connector (DIF-100).
We recommend powering the camcorder from a household power source.
Refer also to the instruction manual of the respective printer.
The print setting menu may differ slightly depending on the connected printer.
Printing with the
(Print/Share) Button
You can print an image without changing the settings by simply pressing the
share) button.
(print/
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Select the still image you wish to print with the
CARD +/– button.
2. Press the
(print/share) button.
• Printing starts. The
button flashes and glows steadily
when printing is complete.
• If you wish to continue printing, select another still image with
the CARD +/– button.
Printing after Selecting the Print Settings
You can select the number of copies and other settings for printing. The setting options
vary depending on your printer model.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Press the SET dial.
• The print setting menu appears.
• Depending on the printer, the message “BUSY.” may appear
before the camcorder displays the print setting menu.
2. Select the print settings (
121).
119
3. Turn the SET dial to select [PRINT] and press the SET dial.
• Printing starts. The print setting menu disappears when printing is complete.
• If you wish to continue printing, select another still image with the CARD +/– button.
Observe the following precautions during printing, otherwise printing may not
be performed correctly.
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not open the memory card cover or remove the memory card.
Images not recorded with this camcorder, uploaded from a computer, edited on
a computer and images whose file names have been changed may not be
printed correctly.
If the message “BUSY.” does not disappear, disconnect the cable from
camcorder and printer and reconnect the camcorder to the printer.
Cancel Printing
Press the SET dial during printing. A confirmation dialog appears. Select [OK]
and press the SET dial.
- Canon Printer: Printing stops even if it is incomplete and the paper is fed
through.
- Canon CP-Printer CP-10/CP-100: A print in progress cannot be stopped.
Printing stops when the current print is finished, and the remaining prints are
canceled.
Printing Errors
If an error occurs during the printing process, an error message appears (
139).
- Canon Printer: Resolve the error. When printing does not resume
automatically, select [CONTINUE] and press the SET dial. If [CONTINUE]
cannot be selected, select [STOP], press the SET dial and retry printing.
Refer also to the printer manual for details.
- Canon CP-Printer CP-10/CP-100: Select [STOP] or [RESUME] and press the
SET dial. (The [RESUME] setting may not appear with some error messages.
In that case, select [STOP].) Refer also to the printer manual for details.
- If the error still persists and printing does not restart, follow below procedure:
1. Disconnect the cable.
2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).
3. Reconnect the cable.
When you have finished printing:
1. Disconnect the cable from the camcorder and printer.
2. Turn off the camcorder.
120
Selecting the Print Settings
The procedure for selecting the number of copies is common to all printers. Other print
setting procedures vary depending on your printer model. Check which icon appears in
the upper left corner of the camcorder screen after connecting, and refer to the relevant
pages accordingly.
E
121
123
124
Selecting the Number of Copies
A maximum of 99 copies can be selected for one still image.
1. In the print setting menu, turn the SET dial to select
(COPIES) and press the SET dial.
2. Turn the SET dial to select the number of copies
and press the SET dial.
Setting the Print Style
PAPER PAPER SIZE
PAPER TYPE
Available paper sizes vary depending on the printer model.
PHOTO, FAST PHOTO, DEFAULT
PAGE LAYOUT BORDERLESS, BORDERED, DEFAULT, 8-UP
(date print)
(print effect)
ON, OFF, DEFAULT
ON, OFF, VIVID, NR, VIVID+NR, DEFAULT
Print setting options and [DEFAULT] settings vary depending on the printer
model. For details, refer to the instruction manual of your printer.
[BORDERED]: The image area remains relatively unchanged from the recorded
image when it is printed. [BORDERLESS]/[8-UP]: The center portion of the
recorded image is printed at an enlarged size. The image’s top, bottom and
sides may be cropped slightly.
[8-UP] can be selected when using card size paper (5.3 x 8.6 cm) with CP
Printers.
Date print cannot be selected with the CP Printers CP-200 and CP-300.
[VIVID], [VIVID+NR] and [NR] can be selected with Canon Bubble Jet Printers.
With CP Printers, make sure to select the paper size of the attached paper
cassette.
121
Paper Settings
1. In the print setting menu, turn the SET dial to select
[PAPER] and press the SET dial.
2. Turn the SET dial to select the paper size and press
the SET dial.
Select the paper size of the paper set in your printer.
3. Turn the SET dial to select the paper type and press
the SET dial.
Select the paper type of the paper set in your printer.
4. Turn the SET dial to select a layout option and
press the SET dial.
Including the Date in the Print
1. In the print setting menu, turn the SET dial to select
(date) and press the SET dial.
2. Turn the SET dial to select a date print option and
press the SET dial.
122
Setting the Print Effect (Image Optimize)
This function uses the camcorder's recording information to optimize the image data,
yielding high quality prints.
E
1. In the print setting menu, turn the SET dial to select
(print effect) and press the SET dial.
2. Turn the SET dial to select a setting and press the
SET dial.
Setting the Print Style
PAPER
CARD #1*, CARD #2*, CARD #3*, LTR, A4
For details on paper type, refer to the Bubble Jet Printer
User Guide.
BORDERS BORDERLESS Prints right to the edges of the page.
BORDERED
Prints with a border.
*
Recommended paper size
[BORDERED]: The image area remains relatively unchanged from the recorded
image when it is printed. [BORDERLESS]: The center portion of the recorded
image is printed at an enlarged size. The image’s top, bottom and sides may be
cropped slightly.
1. In the print setting menu, turn the SET dial to select
[STYLE] and press the SET dial.
2. Make sure that
the SET dial.
(PAPER) is selected and press
123
3. Turn the SET dial to select the paper size and press
the SET dial.
• Select the paper size of the paper set in your printer.
• Pressing the MENU button brings you back to the print
settings menu.
4. Turn the SET dial to select
press the SET dial.
(BORDERS) and
5. Turn the SET dial to select a borders option and
press the SET dial.
Pressing the MENU button brings you back to the print settings
menu.
Setting the Print Style
IMAGE
STANDARD
MULTIPLE
Prints 1 still image per page.
Prints 8 copies of the same still image on one page.
BORDERS BORDERLESS Prints right to the edges of the page.
BORDERED Prints with a border.
[BORDERED]: The image area remains relatively unchanged from the recorded
image when it is printed. [BORDERLESS]/[MULTIPLE]: The center portion of
the recorded image is printed at an enlarged size. The image’s top, bottom and
sides may be cropped slightly.
[MULTIPLE] can only be selected when printing on card size paper.
[BORDERS] can only be selected when [IMAGE] is set to [STANDARD].
1. In the print setting menu, turn the SET dial to select
[STYLE] and press the SET dial.
124
Selecting the Image Style
2. Make sure that
the SET dial.
(IMAGE) is selected and press
E
3. Turn the SET dial to select the image style and
press the SET dial.
Pressing the MENU button brings you back to the print settings
menu.
Selecting the Borders
2. Turn the SET dial to select
press the SET dial.
(BORDERS) and
3. Turn the SET dial to select a borders option and
press the SET dial.
Pressing the MENU button brings you back to the print settings
menu.
125
Trimming Settings
Set the print style before you start with the trimming settings.
1. In the print setting menu, turn the SET dial to select
[TRIMMING] and press the SET dial.
The trimming frame appears.
2. Change the size of the trimming frame.
• Move the zoom lever toward T to shrink the frame, and
toward W to enlarge the frame.
• To cancel the trimming settings, move the zoom lever toward
W until the trimming frame disappears.
3. Move the trimming frame.
• Turn the SET dial to move the frame. Press the SET dial to
switch between the directions (up/down or right/left).
• Pressing the MENU button brings you back to the print
settings menu.
About the color of the trimming frame (Canon CP-Printers only):
- White: No trimming settings.
- Green: Recommended trimming size. (The trimming frame may not appear in
green depending on the image size, paper size or borders settings.)
- Red: The image is magnified beyond recommended size. The image will be
printed coarsely.
The trimming setting applies only to one image.
The trimming setting is canceled with the following operations:
- When you turn off the camcorder.
- When you disconnect the interface cable.
- When you expand the trimming frame beyond its maximum size.
126
Printing with Print Order Settings
You can select still images for printing and set the number of copies. These print order
settings are compatible with the Digital Print Order Format (DPOF) standards and can be
E
used for printing on DPOF compatible printers (
can be selected.
118). A maximum of 200 still images
Selecting Still Images for Printing (Print Order)
Do not connect a USB or DV cable to the camcorder while setting the print orders.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Select the still image you wish to print.
2. Press the SET dial to open the FILE OPER. menu.
3. Select [ PRINT ORDR].
4. Select the number of copies.
• “ ” appears on the image.
• To cancel the print order, set the number of copies to 0.
5. Select [ RETURN] to close the menu.
Selecting in Index Screen Display
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
PRINT ORDER
(
1. Move the zoom lever toward W.
• Up to 6 images appear.
• Select the image you wish to print.
2. Open the menu and select [CARD OPERATIONS]. Select [
ORDER].
PRINT
3. Press the SET dial and set the number of copies with the SET dial.
• “ ” appears on the image.
• To cancel the print order, set the number of copies to 0.
4. Close the menu.
127
Erasing All Print Orders
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
PRINT ORDERS ALL ERASE
(
1. Open the menu and select [CARD OPERATIONS].
2. Select [ PRINT ORDERS ALL ERASE].
“ERASE ALL
PRINT ORDERS?”, [NO] and [YES] appears.
3. Select [YES].
All “ ” disappear.
4. Close the menu.
Printing
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
(
PRINT
38)
1. Connect the printer to the camcorder ( 118).
2. Open the menu and select [
• The print setting menu appears.
PRINT].
• “SET
PRINT ORDER” appears, when you connect a printer with direct print
PRINT] without having set the print order.
function and select [
3. Make sure that [PRINT] is selected and press the SET dial.
Printing starts. The print setting menu disappears when printing is complete.
Depending on the connected printer, you can select style or paper settings
before step 3.
Cancel Printing/Printing Errors (
120)
Restarting Printing
Open the CARD PLAY menu and select [
PRINT]. Select [RESUME] in the
print setting menu and press the SET dial. The remaining images will be
printed.
Printing cannot be restarted in the following cases:
- When you change the print order settings.
- When you delete a still image with print order settings.
128
Transferring Images
Transferring Memory Card Images to a
Computer
E
With the supplied USB cable and Digital Video Software, you can browse and archive
images or arrange still images for printout. For details, refer to the Digital Video Software
Instruction Manual.
Users of Windows OS can also transfer images to the computer by simply pressing the
(print/share) button (
130).
Do not disconnect the USB cable, open the memory card cover, remove the
memory card, change the position of the TAPE/CARD switch or turn off the
camcorder and computer while data is being transferred to the computer (while
the camcorder’s card access indicator is flashing). Doing so may damage the
memory card’s data.
Operation may not work correctly depending on the software and the
specifications/settings of your computer.
The image files on your memory card and the image files saved on the hard
disk drive of your computer are valuable, original data files. If you wish to use
image files on your computer, make copies of them first, and use the copied file,
retaining the original.
Make sure that camcorder and computer are not connected with a DV cable
before connecting the camcorder to the computer using the USB cable.
Otherwise, the computer may not operate properly.
We recommend powering the camcorder from a household power source while
it is connected to the computer.
Refer also to the computer instruction manual.
Users of Windows XP and Mac OS X:
Your camcorder is equipped with the standard Picture Transfer Protocol (PTP)
allowing you to download still images (JPEG only) by simply connecting the
camcorder to a computer via USB cable without installing the software from the
DIGITAL VIDEO SOLUTION DISK.
129
Windows OS only
Direct Transfer
You can transfer images to the computer with the
(print/share) button.
ALL IMAGES...
NEW IMAGES...
Transfers all images to the computer.
Transfers only those images that have not yet been
transferred to the computer.
TRANSFER ORDERS... Transfers images with transfer orders to the computer.
SELECT & TRANSFER... Allows you to select an image and transfers the
selected image to the computer.
WALLPAPER...
Allows you to select a still image and transfers the
selected image to the computer as wallpaper.
Preparations
The first time you connect the camcorder to the computer, you need to install the software
and set the auto-launch setting.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Install the supplied Digital Video Software.
See Installing the Software in the Digital Video Software Instruction Manual.
2. Set the camcorder to CARD PLAY mode.
3. Connect the camcorder to the computer using the USB cable.
See Connecting the Camcorder to a Computer in the Digital Video Software
Instruction Manual.
4. Set the auto-launch setting.
• See Starting CameraWindow in the Digital Video Software Instruction Manual.
• The direct transfer menu appears on the camcorder screen and the
lights up.
button
From the second time on, you only need to connect the camcorder to the
computer to transfer images.
130
Transferring All Images, New Images or Images with
Transfer Orders
To transfer images with transfer order, you need to set the transfer orders (
133).
E
CAMERA PLAY (VCR) CARD CAMERA
CARD PLAY
1. Turn the SET dial to select [
NEW IMAGES] or [ TRANSFER ORDERS].
2. Press the button.
ALL IMAGES],
[
• The images are transferred to the computer and displayed in
the Main Window of ZoomBrowser EX.
• The camcorder displays the transfer menu when transfer is
complete.
• To cancel transfer, turn the SET dial to select [CANCEL] and press the SET dial, or
press the MENU button.
Transferring a Selected Image
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Turn the SET dial to select [
TRANSFER].
SELECT &
2. Press the
button.
3. Select the image you wish to transfer with the
CARD+/– button.
4. Press the
button.
• The selected image is transferred to the computer and displayed in the Main
Window of ZoomBrowser EX.
• To continue transferring, select another image with the CARD+/– button.
• Pressing the MENU button brings you back to the transfer menu.
Transferring a Still Image as Wallpaper
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Turn the SET dial to select [ WALLPAPER].
2. Press the button.
3. Select the still image you wish to transfer as
wallpaper with the CARD +/– button.
4. Press the
button.
• The selected image is transferred to the computer and
displayed on the desktop.
• Pressing the MENU button brings you back to the transfer menu.
131
Do not change the operating mode while the camcorder is connected to a
computer.
Only JPEG compressed still images and Motion JPEG compressed movies can
be transferred.
You can press the SET dial in place of the
IMAGES], [ NEW IMAGES] or [ TRANSFER ORDERS], a confirmation
message appears. Turn the SET dial to select [OK] and press the SET dial.
When transferring with the button, the camcorder retains the transfer
setting even if you turn it off or change the position of the TAPE/CARD switch.
When you have selected [ SELECT & TRANSFER] or [ WALLPAPER], the
button. With [
ALL
screen to select a still image appears. Press the MENU button to display the
direct transfer menu.
When the protect switch of the SD Memory Card is activated during image
transfer, the images will not be marked as “already transferred”, and will be
transferred again when you select [
NEW IMAGES] later.
132
Selecting Images for Transfer (Transfer Order)
You can select images for transfer to the computer. These transfer settings are
compatible with the Digital Print Order Format (DPOF) standards. A maximum of 200
images can be selected.
E
Do not connect a USB or DV cable to the camcorder while setting the transfer orders.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
1. Select the image you wish to transfer.
2. Press the SET dial to open the FILE OPER. menu.
3. Select [ TRANS.ORDER] and press the SET dial.
• “ ” appears on the image.
• To cancel the transfer order, press the SET dial again.
4. Select [ RETURN] to close the menu.
Selecting in Index Screen Display
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
TRANSFER ORDER
(
1. Move the zoom lever toward W.
Up to 6 images appear.
2. Open the menu and select [CARD OPERATIONS]. Select
TRANSFER ORDER].
3. Press the SET dial on the image you wish to transfer.
• “ ” appears on the image.
[
• To cancel the transfer order, press the SET dial again.
4. Close the menu.
Erasing All Transfer Orders
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
MENU
38)
CARD OPERATIONS
TRANS.ORDERS ALL ERASE
(
1. Open the menu and select [CARD OPERATIONS].
2. SELECT [ TRANS.ORDERS ALL ERASE].
“ERASE ALL
TRANSFER ORDERS?”, [NO] and [YES] appears.
3. Select [YES].
All “ ” disappear.
4. Close the menu.
133
Additional Information
About the NETWORK Mode
(DV Messenger Version2)
With the Windows XP dedicated DV Network Software (DV Messenger), you can operate
your camcorder from the computer, perform videoconferences using the camcorder or
remotely access the camcorder at home using the Internet.
Download the DV Messenger and the DV Network Software Instruction Manual from the
following homepage. Refer to the DV Network Software Instruction Manual for details.
www.canondv.com
www.canon.ca
www.canon-asia.com
Preparations
1. Install DV Messenger.
2. Connect the power adapter to the camcorder.
3. Press the UNLOCK button and turn the POWER
switch to NETWORK.
4. Connect the camcorder to the computer using a
DV cable.
• “NETWORK MODE” appears on the camcorder screen.
5. Start DV Messenger.
Before connecting the camcorder to the computer using a DV cable, make sure
that camcorder and computer are not connected with a USB cable, and that no
other 1394 device is connected to the computer.
In NETWORK mode, the camcorder can only be operated from the computer,
except for the following functions:
- When the DV Messenger [CAMERA] control panel is displayed: Zoom and
focus (when DV Messenger set to autofocus)
- When the DV Messenger [VCR] control panel is displayed: Volume
adjustment of the built-in speaker
Following functions cannot be used with DV Messenger.
- Image stabilizer
- Digital zoom
-
Flash
The camcorder cannot be operated with the wireless controller.
134
Screen Displays
Hiding the Displays on the LCD Screen
You can hide the displays on the LCD screen to have a clear screen for playback.
E
CAMERA
CARD CAMERA
PLAY (VCR)
CARD PLAY
MENU
38)
DISPLAY SETUP/
DISPLAYS•••••ON
(
Open the menu and select [DISPLAY SETUP/ ]. Select [DISPLAYS], set
it to [OFF <PLAYBK>] and close the menu.
• Warning messages still appear, and the data code appears if turned on.
• The displays appear while a playback image is magnified or a digital effect is activated.
• Tape operation displays appear for 2 seconds.
• Displays cannot be hidden on the index screen.
Hiding/Showing the Displays on the TV Screen
When you connect a TV for recording, you can select to hide the camcorder displays on
the TV screen. For playback, you can show the camcorder displays on the TV screen.
PLAY (VCR)
CARD PLAY
CAMERA
CARD CAMERA
MENU
38)
DISPLAY SETUP/
TV SCREEN••••ON
(
Open the menu and select [DISPLAY SETUP/ ]. Select [TV SCREEN],
set it to [OFF] and close the menu.
The displays disappear from the TV screen.
CAMERA
CARD CAMERA
PLAY (VCR)
CARD PLAY
MENU
38)
DISPLAY SETUP/
TV SCREEN••••OFF
(
Open the menu and select [DISPLAY SETUP/ ]. Select [TV SCREEN],
set it to [ON] and close the menu.
The displays appear on the TV screen.
135
Screen Displays during Recording/Playback
CAMERA Mode (see also
28)
AF/AE locked during still image recording
93)
(
Flash* (
97)
Skin detail (
51)
Zoom (
30)
Self-timer (
59)
Image stabilizer (
78)
Self-timer countdown (
59)
Recording mode (
Tape operation
60)
Backup battery (
17) /
Program AE (
Exposure (
46)
52)
Condensation warning (
Remote sensor ( 77)
61)
142)
Shutter speed (
Manual focus (
White balance (
57)
53)
55)
Headphones (
Wind screen (
Audio mode (
62)
61)
Card mix (
112)
Widescreen mode (
Remaining card capacity for still images
95)
68)
Digital effects (
Date and time (
63)
22)
(
* ELURA90/ELURA85 only.
PLAY (VCR) Mode
12 bit audio (
End search (
Date search (
Audio dubbing (
87)
72) /
74) /
85)
Data code (
70)
DV connection (
82)
Volume level of speaker or headphones
35)
(
REC
/
: Fast forward playback/
rewind playback ( 34)
x2: x2 playback (
x1: x1 playback (
: Slow playback (
: Frame advance playback/
34)
/
: Playback pause
34)
: Date search (
RTN:
Zero set memory (
: Audio dubbing (
PAUSE
STOP
EJECT
(
x2
x1
/
/
34)
34)
/
74)
RTN
/
/
/
34)
73)
85)
/
FF
frame reverse playback
(
REW
136
CARD CAMERA Mode (see also
101)
Focusing frame (
Flash* ( 97)
Camcorder shake warning (
103)
E
58)
Drive mode (
104)
* ELURA90/ELURA85 only.
CARD PLAY Mode
Slide show (
Data code (
Lap time
109)
70)
Length of the movie
Current image/total images
File number (
Protect mark (
92)
110)
137
List of Messages
Message
Explanation
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
22
CHANGE THE BATTERY Battery pack is exhausted. Replace or charge the battery pack.
PACK
13
144
16
THE TAPE IS SET FOR Cassette is protected. Replace the cassette or change the
ERASURE PREVENTION position of the protect switch.
REMOVE THE
CASSETTE
Camcorder stopped operating to protect the tape. Unload and
reload the cassette.
CHECK THE INPUT
DV cable or USB cable is not connected, or the connected digital
device is turned off.
83
CONDENSATION HAS
BEEN DETECTED
Condensation has been detected in the camcorder.
142
TAPE END
Tape reached the end. Rewind the tape or replace the cassette.
–
CHECK THE CASSETTE You attempted to perform audio dubbing on a tape recorded in a
[REC MODE] mode other than the SP mode.
CHECK THE CASSETTE You attempted to perform audio dubbing on a tape recorded in 16-
[AUDIO MODE] bit or 12-bit 4-channel sound.
CHECK THE CASSETTE You attempted to perform audio dubbing on a tape with a blank
85
85
85
–
[BLANK]
section.
WRONG FORMAT
PLAYBACK NOT
POSSIBLE
You attempted to play back a tape recorded in HD format.
CHECK THE CASSETTE You attempted to perform audio dubbing on a tape recorded in HD
[WRONG FORMAT]
–
format.
HEADS DIRTY, USE
CLEANING CASSETTE
Video heads are dirty. Clean the video heads.
142
82
COPYRIGHT PROTECTED
PLAYBACK IS RESTRICTED
You attempted to play back a copyright protected tape.
COPYRIGHT
PROTECTED DUBBING
RESTRICTED
You attempted to dub a copyright protected tape. May also appear
when an anomalous signal is received during analog line-in
recording, or during analog-digital conversion of a copyright
protected tape.
82
Memory Card Related Messages
Message
Explanation
NO CARD
Memory card not is inserted into the camcorder.
89
89
THE CARD IS SET FOR
ERASURE PREVENTION or change the position of the protect switch.
SD Memory Card is set for erasure prevention. Replace the card
NO IMAGES
No images are recorded on the memory card.
–
–
CARD ERROR
A memory card error occurred. The camcorder cannot record or
play back the image.
The error may be temporary. If the message disappears after 4
seconds and “ ” flashes red, turn the camcorder off, remove
the card and reinsert the card. If “ ” changes to green, you can
continue recording/playback.
CARD FULL
No remaining capacity on the memory card. Replace with another
card or erase images.
–
NAMING ERROR
File or folder number has reached the maximum value.
92
138
Message
Explanation
UNIDENTIFIABLE
IMAGE
Image is not recorded with JPEG compression, or with a
compression not compatible with the camcorder, or the image file
is corrupted.
–
E
TRANSFER
ORDER ERROR
You attempted to set more than 200 transfer orders.
133
CANNOT TRANSFER!
You attempted to transfer a movie file as wallpaper.
131
–
THIS IMAGE CANNOT
BE RECORDED
Some analog images cannot be recorded on the memory card
depending on the signal.
THIS IMAGE CANNOT You attempted to use an image recorded with another camcorder,
BE USED AS START-UP recorded with a compression not compatible with this camcorder,
117
–
IMAGE
or that has been edited on a computer.
TOO MANY STILL
IMAGES DISCONNECT
USB CABLE
Disconnect the USB cable and decrease the number of still
images on the memory card to less than 1800. If a dialog
appeared on the computer screen, close it. Reconnect the USB
cable.
Direct Print Related Messages
Following messages may appear on the camcorder screen. On printers equipped with an
operation panel or printer that can be connected to a TV, an error number or message
displays on the panel or TV monitor. Refer to the printer manual for the remedies
corresponding to the error numbers or messages.
Message
Explanation
PAPER ERROR
There is a problem with the paper.
Wrong paper size is inserted, the ink cannot be used with the selected
paper or paper output tray is open.
NO PAPER
PAPER JAM
Paper is not correctly inserted or there is no paper. If the printer is
equipped with a photo paper cassette, specify the paper feed location
using the Paper Feed switch.
The paper jammed during printing. Select [STOP] to cancel printing.
After removing the paper, set some paper again and press the resume
button on the printer.
PAPER HAS BEEN
CHANGED
Paper size has been changed between print setting and start of printing.
MEDIA TYPE ERROR
You attempted to use a paper size/type that is not supported by the
printer.
INCOMPATIBLE PAPER
SIZE
You attempted to print on paper that cannot be used with the camcorder.
INK ERROR
NO INK
There is a problem with the ink.
The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL
The ink cartridge needs to be replaced soon. Select [CONTINUE] to
restart printing.
INK CASSETTE ERROR There is a problem with the ink cassette.
PAPER AND INK DO
NOT MATCH
The ink cannot be used with the selected paper type.
WASTE TANK FULL
Waste tank is full. Select [CONTINUE] to restart printing. Consult your
dealer or a Canon Service Center listed in the Contact List provided with
the printer or the printer manual to replace the waste tank (waste ink
absorber).
FILE ERROR
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
CANNOT PRINT!
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
139
Message
Explanation
COULD NOT PRINT X
IMAGES
You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.
SET
PRINT ORDER
You attempted to print an image from the CARD PLAY menu
PRINT] without having set the print order.
[
PRINT ORDER
ERROR
You attempted to set more than 200 still images in the print order.
CANNOT TRIM
You attempted to trim an image that was recorded with another
camcorder.
READJUST TRIMMING
PRINTER ERROR
You changed the print style after you set the trimming settings.
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error persists, consult your dealer or a Canon Service
Center listed in the Contact List provided with the printer or the printer
manual.
PRINT ERROR
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status. If the error persists, consult your dealer or a Canon
Service Center listed in the Contact List provided with the printer or the
printer manual.
When you are printing using the
button, check the print settings.
HARDWARE ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on. If
the error persists, consult your dealer or a Canon Service Center listed in
the Contact List provided with the printer or the printer manual.
RECHARGE THE
PRINTER BATTERY
The printer battery is depleted.
COMMUNICATION
ERROR
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the
button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
CHECK PRINT
SETTINGS
The print setting cannot be used for printing with the
button.
PRINTER IN USE
The printer is in use. Check the printer status.
PRINTER WARMING UP Printer is warming up. If the message does not disappear after a few
seconds, check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
PRINTER COVER OPEN Close the printer cover securely.
NO PRINTHEAD No print head is installed in the printer or print head is defect. Refer to the
instruction manual of your printer.
140
Maintenance/Others
Camcorder Handling Precautions
E
Do not carry the camcorder by the LCD panel or viewfinder.
Do not leave the camcorder in places subject to high temperatures, such as a sun-
heated car, and high humidity.
Do not use the camcorder near strong electric or magnetic fields such as above TVs,
near plasma TVs or mobile phones.
Do not point the lens or viewfinder at strong light sources. Do not leave the camcorder
pointed at a bright subject.
Do not use the camcorder in dusty or sandy places. Dust or sand getting inside the
cassette or camcorder may cause damage. Dust and sand can also damage the lens.
Attach the lens cap after use.
The camcorder is not waterproof. Water, mud or salt getting inside the cassette or
camcorder may cause damage.
Be careful of heat generated by lighting equipment.
Do not disassemble the camcorder. If the camcorder does not function properly,
consult qualified service personnel.
Handle the camcorder with care. Do not subject the camcorder to shocks or vibration
as this may cause damage.
Avoid sudden changes in temperature. Moving the camcorder rapidly between hot and
cold temperatures may cause condensation to form on its internal surfaces (
142).
Storage
If you do not intend to use the camcorder for a long time, store it in a place free of dust,
in low humidity, and at temperatures not higher than 30 °C (86 °F).
After storage, check the functions of your camcorder to make sure that the camcorder
is still working properly.
Cleaning
Camcorder Body and Lens
Use a soft, dry cloth to clean the camcorder body and lens. Never use chemically
treated cloth or volatile solvents such as paint thinner.
LCD Screen
Clean the LCD screen using a commercially available cleaning cloth for glasses.
Condensation may form on the surface of the screen when the temperature changes
suddenly. Wipe it with a soft dry cloth.
At cold temperatures, the screen may be darker than usual. This is not a malfunction.
The screen returns to normal when the camcorder warms up.
Viewfinder
Clean the viewfinder screen using a blower brush or a commercially available cleaning
cloth for glasses.
141
Video Heads
When the message “HEADS DIRTY, USE CLEANING CASSETTE” appears, or when
the playback picture becomes distorted, the video heads need to be cleaned.
To maintain the best picture quality, we recommend cleaning the video heads
frequently with the Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available dry cleaning cassette.
Tapes already recorded with dirty video heads may not be played back correctly even
when you clean the video heads.
Do not use wet type cleaning cassettes as this may damage the camcorder.
Condensation
Moving the camcorder rapidly between hot and cold temperature may cause
condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if
condensation is detected. Continued use may damage the camcorder.
Condensation may form in the following cases:
When the camcorder is moved from an
air-conditioned room to warm, humid
place
When the camcorder is moved from a
cold place to a warm room
When the camcorder is left in a humid
room
When a cold room is heated rapidly
How to avoid condensation:
Unload the cassette, place the camcorder in an airtight plastic bag and let it adjust to
temperature changes slowly before removing it from the bag.
When condensation is detected:
The camcorder stops operating and the warning message “CONDENSATION HAS
BEEN DETECTED” appears for approx. 4 seconds and “ ” starts flashing.
If a cassette is loaded, the warning message “REMOVE THE CASSETTE” appears
and “ ” starts flashing. Remove the cassette immediately and leave the cassette
compartment open. Leaving the cassette in the camcorder may damage the tape.
A cassette cannot be loaded when condensation is detected.
142
Resuming use:
It takes about 1 hour until the water droplets evaporate. After the condensation warning
stops flashing, wait for 1 more hour before resuming use.
E
Battery Pack Handling Precautions
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperature higher than 60 °C (140 °F). Do not
leave it near a heater or inside a car in hot weather.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
Charged battery packs continue to discharge naturally. Therefore, charge them on the
day of use, or the day before, to ensure a full charge.
Attach the terminal cover whenever a battery pack is not in use. Contact to metallic
objects may cause a short circuit and damage the battery pack.
Dirty terminals may cause a poor contact between the battery pack and the camcorder.
Wipe the terminals with a soft cloth.
Since storing a charged battery pack for a long time (about 1 year) can shorten its
lifecycle or affect performance, we recommend to discharge the battery pack fully and
to store it in a dry place at temperatures no higher than 30 °C (86 °F). If you do not use
the battery pack for long periods, charge and discharge it fully at least once a year. If
you have more than 1 battery pack, perform these precautions at the same time for all
battery packs.
Replace the battery pack if the usable time after full charge diminishes substantially at
normal temperatures.
Although the battery pack’s operating temperature range is from 0 °C to 40 °C (32 °F
to 104 °F), the optimal range is from 10 °C to 30 °C (50 °F to 86 °F). At cold
temperatures, performance will temporarily decline. Warm it in your pocket before use.
About the battery terminal cover
The battery terminal cover has a [
]-shaped hole. This is useful when you wish to
differentiate between charged and uncharged battery packs. For example, with charged
battery packs, attach the terminal cover so that the [
label.
]-shaped hole shows the blue
Back side of the
battery pack
Terminal cover attached
Charged
Uncharged
143
Lithium Button Battery Handling Precautions
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 100 °C (212 °F) or incinerate
the battery.
CR1616:
• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or
explosion.
CR2025:
• Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony, Sanyo,
or with Duracell2025. Use of other batteries may present a risk of fire or explosion.
Do not pick up the battery using tweezers or other metal tools as this will cause a short
circuit.
Wipe the battery with a clean dry cloth to ensure proper contact.
Keep the battery out of reach of children. If it is swallowed, seek medical assistance
immediately. The battery case may break and the battery fluids may damage stomach
and intestines.
Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.
Cassette Handling Precautions
Rewind tapes after use. If the tape becomes slack and damaged, it may cause picture
and sound distortion.
Return cassettes in the case and store them upright.
Do not leave the cassette in the camcorder after use.
Do not use spliced tapes or nonstandard cassettes as they may damage the
camcorder.
Do not use tapes that have been jammed as video heads may become dirty.
Do not insert anything into the small holes of the cassette, or cover them with
cellophane tape.
Handle cassettes with care. Do not drop or subject them to severe impact as this may
damage the cassettes.
Rewind tapes from time to time if they are stored for a long time.
With cassettes equipped with a memory function, metal plated terminals may become
dirty with use. Clean the terminals with a cotton swab after about 10 times of loading/
unloading. The memory function is not supported by the camcorder.
Protecting Tapes from Accidental Erasure
To protect your recordings from accidental
erasure, slide the tab on the cassette to SAVE
or ERASE OFF.
If you load a protected cassette in CAMERA
REC
SAVE
REC
SAVE
mode, the message “THE TAPE IS SET FOR
ERASURE PREVENTION” appears for
approx. 4 seconds and “ ” starts flashing.
If you wish to record on that cassette, change the position of the tab.
144
Memory Card Handling Precautions
Format new memory cards with the camcorder. Memory cards formatted with other
devices such as a computer may not operate correctly.
E
We recommend saving backups of memory card images on your computer’s hard drive
or other external memory device. Image data may be corrupted or lost due to memory
card defects or exposure to static electricity. Canon Inc. makes no warranties for
corrupted or lost data.
Do not turn off the camcorder, disconnect the power source, open the memory card
cover or remove the memory card while the card access indicator is flashing.
Do not use memory cards in places subject to strong magnetic fields.
Do not leave memory cards in places subject to high humidity and high temperature.
Do not disassemble memory cards.
Do not bend, drop, or subject memory cards to shocks and do not expose them to
water.
Moving a memory card rapidly between hot and cold temperatures may cause
condensation to form on its external and internal surfaces. If condensation forms on the
card, put it aside until the droplets have evaporated completely.
Do not touch or expose the terminals to dust or dirt.
Check the direction before inserting the memory card. Forcing a memory card
backwards into the slot may damage the memory card or the camcorder.
Do not remove the label from the memory card, or affix other labels on the memory
card.
Using the Camcorder Abroad
Power Sources
You can use the compact power adapter to operate the camcorder and to charge battery
packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult
the Canon Service Center for information on plug adapters for overseas use.
Playback on a TV Screen
You can only play back your recordings on TVs with NTSC system. The NTSC system is
used in the following countries/areas:
American Samoa, Antigua, Aruba, Bahamas, Barbados, Bermuda, Bolivia, Canada,
Chile, Columbia, Costa Rica, Cuba, Ecuador, El Salvador, Guam, Guatemala, Greenland,
Haiti, Honduras, Jamaica, Japan, Korea, Mexico, Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico, Saint Kitts and Nevis, Saint Lucia, Saint Vincent
and the Grenadines, Surinam, Taiwan, Trinidad and Tobago, USA, Venezuela, Virgin
Islands.
145
Troubleshooting
If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a
Canon Service Center if the problem persists.
Power Source
Problem
Cause
Solution
Camcorder will not turn on.
Battery pack is exhausted.
Replace or charge the battery
pack.
13
13
13
25
13
16
13
Battery pack is not correctly
attached.
Attach the battery pack
correctly.
The camcorder switches off
by itself.
Battery pack is exhausted.
Replace or charge the battery
pack.
Power save function has
been activated.
Turn on the camcorder.
Cassette compartment will
not open.
Battery pack is exhausted.
Replace or charge the battery
pack.
Cassette compartment cover Open the cassette
is not fully open.
compartment cover fully.
Cassette compartment
stopped during loading/
unloading.
Battery pack is exhausted.
Replace or charge the battery
pack.
LCD/viewfinder switches on
and off.
Battery pack is exhausted.
Replace or charge the battery
pack.
13
–
Battery pack will not charge.
Battery packs will not charge
outside the temperature
range of 0 °C and 40°C
(32 °F and 104 °F).
Charge the battery pack in
temperatures between 0 °C
and 40 °C (32 °F and 104 °F).
Battery packs become hot
Wait until the battery pack
–
–
with use and may not charge. temperature is below 40 °C
(104 °F) and retry charging.
The battery pack is damaged. Use a different battery pack.
Recording/Playback
Problem
Cause
Solution
Turn on the camcorder.
Load a cassette.
Buttons will not work.
Camcorder is not turned on.
Cassette is not loaded.
Cassette is not loaded.
25
16
16
13
“
“
” flashes on the screen.
Load a cassette.
” flashes on the screen. Battery pack is exhausted.
Replace or charge the battery
pack.
“
” flashes on the screen. Condensation is detected.
See reference page.
142
16
“REMOVE THE CASSETTE” Camcorder stopped operating Unload and reload the
appears on the screen.
The wireless controller will not [WL.REMOTE] is set to
work. [OFF ] in the menu.
to protect the tape.
cassette.
Set [WL.REMOTE] to [ON] in
the menu.
77
20
The battery of the wireless
controller is exhausted.
Replace the battery.
146
Recording
Problem
Cause
Solution
“
screen.
” flashes red on the
The camcorder malfunctions. Consult a Canon Service
Center.
–
E
Image will not appear on the
screen.
Camcorder is not set to
CAMERA mode.
Set the camcorder to
CAMERA mode.
25
22
17
“SET THE TIME ZONE,
DATE AND TIME” appears on not set.
the screen.
Time zone, date and time are Set the time zone, date and
time.
Backup battery is exhausted. Replace the backup battery
and reset the time zone, date
and time.
Battery pack is inserted the
wrong way.
Insert the backup battery with
the + side facing outward and
set the time zone, date and
time.
17
Pressing the start/stop button Camcorder is turned off.
will not start recording.
Turn on the power.
Load a cassette.
25
16
16
Cassette is not loaded.
Tape reached the end
Rewind the tape or replace
the cassette.
(“ END” flashes on the
screen).
Cassette is protected (“
flashes on the screen).
”
Change the position of the
protect switch.
144
25
Camcorder is set to a mode
other than the CAMERA
mode.
Set the camcorder to
CAMERA mode.
Camcorder will not focus.
Autofocus does not work on
that subject.
Focus manually.
53
18
Viewfinder is not adjusted.
Adjust the viewfinder with the
dioptric adjustment lever.
Lens is dirty.
Clean the lens.
142
–
A vertical light bar appears on Bright light in a dark scene
the screen.
may cause a vertical light bar
(smear) to appear. This is not
a malfunction.
– – –
Viewfinder picture is blurred.
Viewfinder is not adjusted.
Adjust the viewfinder with the
dioptric adjustment lever.
18
–
Sound is distorted or
recorded in a lower volume
than the actual volume.
When recording near loud
sound (such as fireworks,
drums or concerts), sound
may become distorted or may
not be recorded in the actual
sound level. This is not a
malfunction.
– – –
147
Playback
Problem
Cause
Solution
Pressing the playback button Camcorder is turned off, or is Set the camcorder to PLAY
does not start playback.
33
33
not set to PLAY (VCR) mode. (VCR) mode.
The TAPE/CARD switch is set Set the TAPE/CARD switch to
to CARD.
TAPE.
Cassette is not loaded.
Load a cassette.
Rewind the tape.
16
33
Tape reached the end
(“ END” flashes on the
screen).
Image will not appear on the
TV screen.
[AV/PHONES ] is set to
[PHONES ] in the menu.
Set [AV/PHONES ] to [AV]
in the menu.
36
84
36
[AV DV] is set to [ON] in
the menu.
Set [AV
menu.
DV] to [OFF] in the
Tape is running, but image will TV/VIDEO selector on the TV Set the selector to VIDEO.
not appear on the TV screen. is not set to VIDEO.
Video heads are dirty.
Clean the video heads.
142
–
You attempted to play back or Stop playback/dubbing.
dub copyright protected tape.
No sound from the built-in
speaker.
Speaker volume is turned off. Adjust the volume with the
SET dial.
35
35
Noise comes out of the
headphones.
[AV/PHONES ] is set to
[AV] in the menu.
Set [AV/PHONES ] to
[PHONES ] in the menu.
Editing
Problem
Cause
Solution
Dubbing via the camcorder's
DV terminal does not work.
[AV
the menu.
DV] is set to [ON] in
Set [AV
menu.
DV] to [OFF] in the
84
–
Wrong signal format.
Dubbing may work via the AV
terminal.
Refer also to the instruction
manual of the connected
device.
148
Memory Card Operation
Problem
Cause
Solution
Memory card cannot be
inserted.
Memory card was not facing
the correct direction.
Turn the memory card over
and reinsert it.
89
89
E
Memory card cannot be
recorded.
Memory card is full.
Replace the memory card or
erase images.
Memory card is not formatted. Format the memory card.
116
89
Memory card is not inserted.
Insert a memory card.
File number reached
maximum value.
Set [FILE NOS.] to [RESET]
in the menu and insert a new
memory card.
92
SD Memory Card is
protected.
Change the position of the
protect switch.
89
Memory card cannot be
played back.
Camcorder is not set to
CARD PLAY mode.
Set the camcorder to CARD
PLAY mode.
108
Memory card is not inserted.
Image is protected.
Insert a memory card.
Cancel the protection.
89
110
89
Image cannot be erased.
SD memory card is protected. Change the position of the
protect switch.
“
” flashes red.
Card error occurred.
Turn off the camcorder.
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.
116
Printing
Problem
Cause
Solution
The printer is not operating
even though camcorder and
printer are correctly
connected.
The camcorder is set to
NETWORK mode.
1. Set the camcorder to
CARD PLAY mode.
2. Disconnect and reconnect
the USB cable.
–
3. Turn off the printer and turn
it back on.
149
System Diagram
(Availability differs from area to area)
WS-20 Wrist Strap
WA-34
Wide Attachment
SS-900 Shoulder Strap
CBC-NB2
Car Battery Charger
WD-H34
Wide-converter
MiniDV
Video Cassette
NB-2L, NB-2LH,
BP-2L12, BP-2L14
Battery Pack
CB-2LT
Battery Charger
WL-D85
Wireless Controller
TL-H34
Tele-converter
CA-570 Compact
Power Adapter
NB-2L, NB-2LH,
BP-2L12, BP-2L14
Battery Pack
FS-34U
Filter Set
TV
STV-250N
Stereo Video Cable
VCR
Commercially available
DV Cable
Digital Device
Stereo Microphone
(commercially available)
PC Card Adapter
SDC-128M
SD Memory Card
USB Reader/Writer
BP-900 Series
Battery Pack
MultiMediaCard
VL-10Li
Battery
Video Light
Computer
IFC-300PCU
USB Cable
SC-1000 Soft
Carrying Case
SC-2000 Soft
Carrying Case
SC-A50 Soft
Carrying Case
Canon printers with direct print function /
PictBridge-compliant printers
150
Optional Accessories
Call or visit your local retailer/dealer for genuine Canon video accessories. You can also
obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon
U.S.A. Information Center.
E
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
Battery Packs
When you need extra battery packs, select
from the following: NB-2L, NB-2LH, BP-2L12,
BP-2L14.
CB-2LT Battery Charger
Use the battery charger for charging the
battery packs. It plugs directly into a power
outlet without a cable.
Battery Pack
NB-2LH
Charging Time
90 min.
NB-2L
80 min.
BP-2L12
BP-2L14
150 min.
170 min.
Charging time varies according to the charging condition.
CBC-NB2 Car Battery Charger
Use the car battery charger to charge battery
packs on the move. The car battery cable
plugs into your car’s cigarette lighter and runs
off a 12-24 V DC negative ground battery.
151
TL-H34 Tele-converter
This Tele-converter lens increases the focal
length of the camcorder lens by a factor of
1.5.
• The image stabilizer is not as effective when
the Tele-converter is attached.
• The minimum focusing distance with the TL-H34 is 2.5 m (8.2 ft.); 2.5 cm (0.98 in.) at
maximum wide angle.
•
When the Tele-converter is attached, a shadow may appear in the
picture when you record with flash or assist lamp.
WD-H34 Wide-converter
This lens decreases focal length by a factor of
0.7, giving you a wide perspective for indoor
shots or panoramic views.
•
When the Wide-converter
is attached, a shadow may appear in the
picture when you record with flash or assist lamp.
FS-34U Filter Set
Neutral density and MC protector filters help
you to control difficult lighting conditions.
VL-10Li Battery Video Light
This compact yet powerful video light can be
used for both indoor and outdoor shooting. It
attaches to the SA-1 Adapter Bracket and is
powered by BP-900 series battery packs.
• Approximate usage time: BP-915: 60 min.,
BP-930: 120 min., BP-945: 170 min.
• BP-900 series battery packs are charged with the CA-920 Compact Power Adapter or
CH-910 Dual Battery Charger/Holder.
WS-20 Wrist Strap
Use this for extra additional protection for
active shooting.
152
SC-1000/SC-2000 Soft Carrying Case
A handy camcorder bag with padded
compartments and plenty of space for
accessories.
E
SC-A50 Soft Carrying Case
This lightweight bag keeps the camcorder
within easy reach without weighing you down
or getting in the way.
This mark identifies genuine Canon video accessories. When you
use Canon video equipment, we recommend Canon-brand
accessories or products bearing the same mark.
153
Specifications
ELURA90/ELURA85/ELURA80
System
Video Recording System
2 rotary heads, helical scanning DV system (consumer digital VCR SD
system), digital component recording
Audio Recording System
Television System
Image Sensor
PCM digital sound: 16 bit (48 kHz/2 ch); 12 bit (32 kHz/4 ch)
EIA standard (525 lines, 60 fields) NTSC color signal
1/4.5-inch CCD, approx. 1,330,000 pixels
Effective pixels: tape approx. 690,000 pixels
card approx. 1,230,000 pixels
Tape Format
Tape Speed
Videocassettes bearing the “MiniDV” mark.
SP: 18.81 mm/s (0.74 ips), LP: 12.56 mm/s (0.49 ips)
SP: 80 min., LP: 120 min.
Maximum Recording Time
(80 min. cassette)
Fast Forward/Rewind Time
LCD Screen
Approx. 2 min. 20 sec. (with a 60 min. cassette)
2.5-inch. TFT color, approx. 123,000 pixels
0.33-inch. TFT color, approx. 113,000 pixels
Stereo electret condenser microphone
Viewfinder
Microphone
Lens
ELURA90: f=3.5-70 mm, f/1.8-3.5, 20x power zoom
35mm equivalent:
Tape: 4:3 recording: 50.5-1,010 mm
16:9 recording (image stabilizer ON): 44.6-892 mm
16:9 recording (image stabilizer OFF): 41.3-826 mm
Card: 37.9-758 mm
ELURA85/ELURA80:
f=3.5-63 mm, f/1.8-3.4, 18x power zoom
35mm equivalent:
Tape: 4:3 recording: 50.5-909 mm
16:9 recording (image stabilizer ON): 44.6-803 mm
16:9 recording (image stabilizer OFF): 41.3-743 mm
Card: 37.9-682 mm
Lens Configuration
Filter Diameter
10 elements in 8 groups
34 mm
AF System
TTL autofocus, manual focusing possible
1 m (3.3 ft.); 1 cm (0.39 in.) on maximum wide angle
Minimum Focusing Distance
White Balance
Auto white balance, pre-set white balance (indoor, outdoor) or custom
white balance
Minimum Illumination
Recommended Illumination
Image Stabilization
1.8 lx (using the Night mode)
More than 100 lx
Electronic
Memory Card
Recording Media
SD Memory Card, MultiMediaCard
Number of Recording Pixels
Still image: 1280 x 960, 640 x 480 pixels
Movie: 320 x 240, 160 x 120 pixels, 15 frames/sec.
File Format
Design rule for Camera File System (DCF), Exif 2.2* compliant, DPOF
compliant
* This camcorder supports Exif 2.2 (also called “Exif Print”). Exif Print is a standard for enhancing the
communication between camcorders and printers. By connecting to an Exif Print-compliant printer, the
camcorder’s image data at the time of shooting is used and optimized, yielding extremely high quality prints.
Image Compression Method
Still image: JPEG (compression: Super Fine, Fine, Normal)
Movie: Video data: Motion JPEG, Audio data: WAVE (monaural)
154
I
Input/Output Terminals
AV Terminal
Ø3.5 mm minijack
Video:
1 Vp-p/75 ohms unbalanced
–10 dBV (47 kohm load)/3 kohms or less
–10 dBV/40 kohms or more
Audio output:
Audio input:
E
DV Terminal
Special 4-pin connector (IEEE 1394 compliant)
MIC Terminal
(ELURA90/ELURA85)
Ø3.5 mm stereo mini-jack
–57 dBV (with 600 ohm mic)/5 kohms or more
Headphone Terminal
USB Terminal
Ø3.5 mm stereo mini-jack
mini-B
Power/Others
Power supply (rated)
7.4 V DC
Power consumption (AF on)
Operating temperature
Dimensions (W x H x D)
Weight (camcorder body only)
2.6W (using viewfinder), 3.2W (using LCD screen normal brightness)
0 – 40 °C (32 – 104 °F)
72 x 78 x 131 mm (2.8 x 3.1 x 5.2 in.) excluding protrusions
500 g (1.1 lb.)
CA-570 Compact Power Adapter
Power supply
Power consumption
Rated output
100 – 240 V AC, 50/60 Hz
17W
8.4 V DC, 1.5 A
Operating temperature
Dimensions
0 – 40 °C (32 – 104 °F)
52 x 90 x 29 mm (2.1 x 3.5 x 1.1 in.)
135 g (4.8 oz.)
Weight
NB-2LH Battery Pack
Battery type
Rechargeable Lithium Ion Battery
Rated voltage
Operating temperature
Battery capacity
Dimensions
7.4 V DC
0 – 40 °C (32 – 104 °F)
720 mAh
33.3 x 16.2 x 45.2 mm (1.3 x 0.64 x 1.8 in.)
43 g (1.5 oz.)
Weight
SDC-8M SD Memory Card
Capacity
8 MB
Interface
SD Memory Card standard
0 – 40 °C (32 – 104 °F)
32 x 24 x 2.1 mm (1.3 x 0.94 x 0.08 in.)
2 g (0.07 oz.)
Operating temperature
Dimensions
Weight
Weight and dimensions are approximate. Errors and omissions excepted. Subject to
change without notice.
155
Item Codes
Provided Accessories
Lens Cap
D52-0260-000
CA-570 Compact Power Adapter
NB-2LH Battery Pack
8468A002AA
9612A001AA
STV-250N Stereo Video Cable
SS-900 Shoulder Strap
3067A002AA (D82-0590-201)
D81-1470-000
WL-D85 Wireless Controller
IFC-300PCU USB Cable
WA-34 Wide Attachment (ELURA90)
D83-0712-000
6906A001AA
D55-0240-000
Optional Accessories
BP-2L12 Battery Pack
7871A002AA
BP-2L14 Battery Pack
9582A002AA
NB-2L Battery Pack
7302A001AA
CB-2LT Battery Charger
CBC-NB2 Car Battery Charger
TL-H34 Tele-converter
7303A001AA
7873A002AA
9583A001AA
WD-H34 Wide-converter
FS-34U Filter Set
9584A001AA
8081A001AA
WS-20 Wrist Strap
3118A002AA (D81-0190-202)
9389A001AA
SC-2000 Soft Carrying Case
SC-1000 Soft Carrying Case
SC-A50 Soft Carrying Case
VL-10Li Battery Video Light
JR 7.2V 10WF Halogen Bulb
DVM-CL DV Cleaning Cassette
3083A002AA (D81-1200-201)
D81-1302-201
3140A002AA (D86-0081-201)
3141A002AA (D86-0090-201)
3134A002AA (D36-0032-201)
156
Index
12bit audio . . . . . . . . . . . . . . . . . . . . . . 87
16:9 widescreen . . . . . . . . . . . . . . . . . . 68
6-second auto date . . . . . . . . . . . . . . . 71
DV dubbing . . . . . . . . . . . . . . . . . . . . . . 82
DV terminal . . . . . . . . . . . . . . . . . . . 79, 88
E
E
A
Easy recording . . . . . . . . . . . . . . . . . . . 46
Effects . . . . . . . . . . . . . . . . . . . . . . . . . . 64
End search . . . . . . . . . . . . . . . . . . . . . . 72
Abroad, using the camcorder . . . . . . . 145
Accessories . . . . . . . . . . . . . . . . . . 8, 151
AF-assist lamp . . . . . . . . . . . . . . . . . . . 98 Erasing images . . . . . . . . . . . . . . . . . . 111
Analog line-in . . . . . . . . . . . . . . . . . . . . 81
Analog-digital converter . . . . . . . . . . . . 83
Assist lamp . . . . . . . . . . . . . . . . . . . . . . 49
Audio dubbing . . . . . . . . . . . . . . . . . . . 85
Audio mode . . . . . . . . . . . . . . . . . . . . . 61
Auto . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Auto Exposure Bracketing . . . . . . . . . 105
Autofocus . . . . . . . . . . . . . . . . . . . . . . . 53
AV/headphones terminal . . . . . . . . 35, 36
AV-DV . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Exposure . . . . . . . . . . . . . . . . . . . . . . . 52
F
Faders . . . . . . . . . . . . . . . . . . . . . . . . . 63
Fast forward . . . . . . . . . . . . . . . . . . . . . 34
File numbers . . . . . . . . . . . . . . . . . . . . . 92
Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Focusing . . . . . . . . . . . . . . . . . . . . . . . . 53
Focusing point . . . . . . . . . . . . . . . . . . 103
Focus-Priority . . . . . . . . . . . . . . . . . . . 103
Formatting . . . . . . . . . . . . . . . . . . . . . 116
B
Backlight . . . . . . . . . . . . . . . . . . . . . . . . 21
Backup battery . . . . . . . . . . . . . . . . . . . 17
Battery charger . . . . . . . . . . . . . . . . . . 151
Battery pack . . . . . . . . . . . . . . . . . . . . . 13
Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Brightness . . . . . . . . . . . . . . . . . . . . . . 77
G
Grip belt . . . . . . . . . . . . . . . . . . . . . . . . 18
H
Headphones . . . . . . . . . . . . . . . . . . 35, 61
I
C
Image quality . . . . . . . . . . . . . . . . . . . . 90
Image stabilizer . . . . . . . . . . . . . . . . . . . 78
Index screen . . . . . . . . . . . . . . . . . . . . 109
Infinity focus . . . . . . . . . . . . . . . . . . . . . 54
Card jump . . . . . . . . . . . . . . . . . . . . . . 109
Card mix . . . . . . . . . . . . . . . . . . . . . . . 112
Computer . . . . . . . . . . . . . . . . . . . 88, 129
Condensation . . . . . . . . . . . . . . . . . . . 142
Connections - TV, VCR . . . . . . . . . . . . 36
Continuous shooting . . . . . . . . . . . . . 104
Copyright signals . . . . . . . . . . . . . . . . . 82
L
Language . . . . . . . . . . . . . . . . . . . . . . . 76
LCD Backlight . . . . . . . . . . . . . . . . . . . . 21
LCD mirror mode . . . . . . . . . . . . . . . . . 26
LCD screen . . . . . . . . . . . . . . . . . . . . . . 21
Lens cap . . . . . . . . . . . . . . . . . . . . . . . . 18
Low light mode . . . . . . . . . . . . . . . . . . . 46
LP mode . . . . . . . . . . . . . . . . . . . . . . . . 60
D
Data code . . . . . . . . . . . . . . . . . . . . . . . 70
Date and time . . . . . . . . . . . . . . . . . . . . 22
Date format . . . . . . . . . . . . . . . . . . . . . 76
Date search . . . . . . . . . . . . . . . . . . . . . 74
Demo mode . . . . . . . . . . . . . . . . . . . . . 78
Digital effects . . . . . . . . . . . . . . . . . . . . 63
Digital Zoom . . . . . . . . . . . . . . . . . . . . . 31
Direct print function . . . . . . . . . . . . . . 118
Direct transfer . . . . . . . . . . . . . . . . . . . 130
Drive mode . . . . . . . . . . . . . . . . . . . . . 104
M
Maintenance . . . . . . . . . . . . . . . . . . . . 141
Manual focus . . . . . . . . . . . . . . . . . . . . 53
Memory card . . . . . . . . . . . . . . . . . . . . . 89
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . 38
157
MIC terminal . . . . . . . . . . . . . . . . . . . . . 62 SP mode . . . . . . . . . . . . . . . . . . . . . . . . 60
Microphone . . . . . . . . . . . . . . . . . . . . . 62
Mini video light . . . . . . . . . . . . . . . . . . . 49
Movie size . . . . . . . . . . . . . . . . . . . . . . 91
Multi-image screen . . . . . . . . . . . . . . . . 64
MultiMediaCard . . . . . . . . . . . . . . . . . . 89
My Camera settings . . . . . . . . . . . . . . . 75
Speaker . . . . . . . . . . . . . . . . . . . . . . . . 35
Sports mode . . . . . . . . . . . . . . . . . . . . . 46
Spotlight mode . . . . . . . . . . . . . . . . . . . 46
Still image quality . . . . . . . . . . . . . . . . . 90
Still image size . . . . . . . . . . . . . . . . . . . 90
Stitch Assist mode . . . . . . . . . . . . . . . 106
Super Night mode . . . . . . . . . . . . . . . . . 49
N
ND filter . . . . . . . . . . . . . . . . . . . . . . . . 94
T
NETWORK Mode . . . . . . . . . . . . . . . . 134 Tape protection . . . . . . . . . . . . . . . . . . 144
Night mode . . . . . . . . . . . . . . . . . . . . . . 49 Time code . . . . . . . . . . . . . . . . . . . . . . . 28
Night+ mode . . . . . . . . . . . . . . . . . . . . . 49 Time zone . . . . . . . . . . . . . . . . . . . . . . . 22
Transfer order . . . . . . . . . . . . . . . . . . . 133
Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . 32
O
Operating Mode . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . 146
TV Screen . . . . . . . . . . . . . . . . . . . 36, 135
Output channel . . . . . . . . . . . . . . . . . . . 37
U
USB terminal . . . . . . . . . . . . . . . 118, 129
P
Playback - Memory card . . . . . . . . . . 108
Playback pause . . . . . . . . . . . . . . . . . . 34
Playback- Tape . . . . . . . . . . . . . . . . . . . 33
Portrait mode . . . . . . . . . . . . . . . . . . . . 46
Power adapter . . . . . . . . . . . . . . . . . . . 13
Print order . . . . . . . . . . . . . . . . . . . . . 127
V
Video heads . . . . . . . . . . . . . . . . . . . . 142
Video light . . . . . . . . . . . . . . . . . . . . . . 152
Videocassettes . . . . . . . . . . . . . . . . . . . 16
Program AE . . . . . . . . . . . . . . . . . . . . . 46 Viewfinder . . . . . . . . . . . . . . . . . . . . . . . 18
Protect . . . . . . . . . . . . . . . . . . . . . . . . 110
W
White balance . . . . . . . . . . . . . . . . . . . . 55
R
Record review . . . . . . . . . . . . . . . . . . . 29 Wide attachment . . . . . . . . . . . . . . . . . . 19
Record search . . . . . . . . . . . . . . . . . . . 29 Widescreen . . . . . . . . . . . . . . . . . . . . . . 68
Recording movies (memory card) . . . 100
Recording movies (tape) . . . . . . . . . . . 25
Recording programs . . . . . . . . . . . . . . . 46
Recording still images (memory card) . 93
Remote sensor . . . . . . . . . . . . . . . . . . . 77
Review . . . . . . . . . . . . . . . . . . . . . . . . . 99
Rewind . . . . . . . . . . . . . . . . . . . . . . . . . 33
Wind screen . . . . . . . . . . . . . . . . . . . . . 62
Wireless controller . . . . . . . . . . . . . . . . 20
Z
Zero set memory . . . . . . . . . . . . . . . . . 73
Zooming . . . . . . . . . . . . . . . . . . . . . . . . 30
S
Sample images . . . . . . . . . . . . . . . . . 114
Sand & Snow mode . . . . . . . . . . . . . . . 46
Screen displays . . . . . . . . . . . . . . . . . 135
SD Memory Card . . . . . . . . . . . . . . . . . 89
Self-timer . . . . . . . . . . . . . . . . . . . . . . . 59
Shoulder strap . . . . . . . . . . . . . . . . . . . 19
Shutter speed . . . . . . . . . . . . . . . . . . . . 57
Skin detail . . . . . . . . . . . . . . . . . . . . . . . 51
Slide show . . . . . . . . . . . . . . . . . . . . . 109
158
U.S.A.
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY
FOR THE UNITED STATES
E
The warranty set forward below is given by Canon U.S.A., Inc. with respect to equipment purchased in the
United States. The limited warranty is only effective upon presentation of your Bill of Sale or other proof of
purchase.
Canon consumer digital video equipment is warranted under normal, non-commercial, personal use, against
defective materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or comparable rebuilt parts for a period of ONE YEAR
from the date of original purchase, except for a defective Video Head, which will be exchanged for a period of
three months from the date of purchase.
Labor: For a period of ONE YEAR from the date of original purchase, labor will be provided free of charge by our
factory service centers or designated service facilities located in the United States.
When returning equipment under this warranty, you must pre-pay the shipping charges, and you must enclose
the Bill of Sale or other proof of purchase with a complete explanation of the problem. During your ONE-YEAR
warranty period, repairs will be made and the equipment return-shipped to you free of charge. After your
warranty period is over, you will be given an estimate of the cost of repair and an opportunity to approve or
disapprove of the repair expense before it is incurred. If you approve, repairs will be made and the equipment
return-shipped to you. (shipping charges apply). If you disapprove, we will return-ship the equipment at no
charge to you.
Non-Canon brand peripheral equipment and software which may be distributed with Canon DV
camcorders are sold “AS IS” without warranty of any kind by CUSA, including any implied warranty
regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such
non-Canon brand items is given by the manufacturer or producer thereof.
CUSA shall have no responsibility under this limited warranty for use of Canon DV Camcorders in conjunction
with incompatible peripheral equipment and incompatible software.
In order to obtain warranty service, contact the authorized Canon retail dealer from whom you purchased the DV
Camcorder or call the CANON INFORMATION CENTER AT 1-800-828-4040). You will be directed to the
nearest service facility for your product.
This Limited Warranty covers all defects encountered in normal use of the equipment and does not apply in the
following cases:
A) Loss or damage to the equipment due to abuse, mishandling, accident, improper maintenance, or
failure to follow operating instructions;
B) If the equipment is defective as a result of leaking batteries, sand, dirt or water damage;
C)If defects or damages are caused by the use of unauthorized parts or by service other than our
authorized agent;
D)If the equipment is used for commercial or industrial use.
This Limited Warranty does not cover cabinet (exterior finish), video cassette tape, head cleanings, nor does it
apply to equipment purchased outside the United States. This warranty does not cover units sold to rental firms,
military operations, hotels, schools, hospitals or for other commercial, industrial, or institutional applications.
These uses are covered only by such specific warranty as Canon may issue with such sales.
This Limited Warranty does not apply to accessories or consumables for the DV Camcorder, which are sold “AS
IS”, without warranty of any kind by CUSA.
Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card is most
important in order to be sure you are contacted right away should there be a safety inspection, modification or
product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS EQUIPMENT SHALL BIND THE UNDERSIGNED. (SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU). CUSA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR
PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OF
DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE,
MISUSE OR INABILITY TO USE THE DV CAMCORDER, REGARDLESS OF THE LEGAL THEORY ON
WHICH THE CLAIM IS BASED, AND EVEN IF CUSA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CUSA BE GREATER THAN THE PURCHASE
PRICE OF THE DV CAMCORDER SOLD BY CUSA AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE, MISUSE
OR INABILITY TO USE THE DV CAMCORDER NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CUSA.
(SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).THIS WARRANTY
SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS EQUIPMENT OR
THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC.
159
CANADA
CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY
The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video
equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of
purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required.
Canon consumer video digital equipment is warranted under normal, non-commercial, personal use, against defective
materials or workmanship as follows:
Parts: Defective parts will be exchanged for new parts or, at Canon Canada’s option, comparable rebuilt parts for a period
of one year from the date of original purchase, except Video Heads which will be exchanged for a period of 3 months from
the date of purchase.
Labour: For a period of one year from the date of original purchase, labour will be provided free of charge by our Canon
Service Facilities in Canada.
This limited warranty covers all defects except where:
(a) The loss or damage to the product results from:
i) accident, natural disaster, mishandling, abuse, neglect, unauthorized product modification or failure to follow
instructions contained in the instruction manual;
ii) the use of accessories, attachments, products, supplies, parts or devices with this Canon product that do not
conform to Canon specifications or that cause abnormally frequent service problems;
iii) repairs or services performed by any party other than a Canon Service Facility;
iv) defective batteries or any exposure to water, sand or dirt;
v) shipping (claim must be presented to the shipper);
(b) Any serial number on the video equipment is altered or removed.
(c) The digital video equipment is used for commercial, professional or industrial purposes.
This limited warranty does not cover the cabinet (exterior finish) of the digital video equipment, video cassette tapes, head
cleanings, nor does it apply to digital video equipment purchased outside Canada.
TO OBTAIN WARRANTY SERVICE
Ship your Canon digital video equipment in its original carton, box or equivalent, properly packed, fully insured with
shipping charges prepaid, together with a copy of your bill of sale or other proof of purchase and a description of the
problem to any of the Canon Service Facilities in Canada.
LIMITATIONS
Except as otherwise required by applicable legislation, this warranty is in lieu of all other warranties, conditions,
guarantees or representations, express or implied, statutory or otherwise, relative to this Canon product, including implied
warranties or conditions of merchantability or fitness for a particular purpose.
Canon Canada assumes no liability for special, consequential or incidental damages or loss that may arise, whether on
account of negligence or otherwise, from the use, misuse or inability to use this Canon product (including loss of profit,
revenue, video tapes or enjoyment) or from failure to conform to any express or implied warranties, conditions, guarantees
or representations. Any recovery under this limited warranty shall not exceed the purchase price of the product. Canon
Canada does not assume or authorize any other person to assume for Canon Canada any other liability with respect to
this Canon product.
This warranty does not extend to any person other than the original purchaser of this Canon product or the person for
whom it was purchased as a gift and states your exclusive remedy.
NOTICE TO CONSUMER
If you plan to take important videos or if the product has not been used for some time, please check all functions with the
instruction book before using it.
160
|
