DIGITAL CAMERA
Reference Manual
En
About This Manual
If you want to start using the camera right away, see “The Basics of Shooting and Playback”
To learn about the parts of the camera and information that is displayed in the monitor, see
iii
Other Information
•
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used in this manual:
Symbol
Description
This icon indicates cautions and information that should be read before using
the camera.
B
C
This icon indicates notes and information that should be read before using the
camera.
These icons indicate other pages containing relevant information;
E: “Reference Section”, F: “Technical Notes and Index.”
A/E/F
•
•
•
SD and SDHC/SDXC memory cards are referred to as “memory cards” in this manual.
The setting at the time of purchase is referred to as the “default setting.”
The names of menu items displayed in the camera monitor, and the names of buttons or
messages displayed on a computer monitor appear in bold.
In this manual, images are sometimes omitted from monitor display samples so that
monitor indicators can be more clearly shown.
•
•
Illustrations and monitor content shown in this manual may differ from the actual
product.
iv
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. Visit the site below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, Charging AC
adapters, and AC adapters) certified by Nikon specifically for use with this Nikon digital camera are
engineered and proven to operate within the operational and safety requirements of this electronic
circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could
interfere with normal operation of the camera or result in the batteries overheating, igniting,
rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Holographic seal: Identifies this
device as an authentic Nikon product.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
v
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of
paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the
prior permission of the government was obtained, the copying or reproduction of unused postage
stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies and
private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies, and photographs is governed by national and international
copyright laws. Do not use this product for the purpose of making illegal copies or to infringe
copyright laws.
vi
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or
built-in camera memory does not completely erase the original image data. Deleted files can
sometimes be recovered from discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
should be taken to avoid injury or damage to property when physically destroying data storage
devices.
vii
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read the following
safety precautions in their entirety before using this equipment. Keep these safety
instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed in this
section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of
malfunction
unplugging the product and/or removing
the battery.
Should you notice smoke or an unusual
smell coming from the camera or Charging
AC Adapter, unplug the Charging AC
Adapter and remove the battery
immediately, taking care to avoid burns.
Continued operation could result in injury.
After removing or disconnecting the power
source, take the equipment to a Nikon-
authorized service representative for
inspection.
Do not use the camera or Charging
AC Adapter in the presence of
flammable gas
Do not use electronic equipment in the
presence of flammable gas, as this could
result in explosion or fire.
Handle the camera strap with care
Never place the strap around the neck of an
infant or child.
Do not disassemble
Keep out of reach of children
Particular care should be taken to prevent
infants from putting the battery or other
small parts into their mouths.
Touching the internal parts of the camera or
Charging AC Adapter could result in injury.
Repairs should be performed only by
qualified technicians. Should the camera or
Charging AC Adapter break open as the
result of a fall or other accident, take the
product to a Nikon-authorized service
representative for inspection, after
viii
Do not remain in contact with the
camera, battery charger, or AC
adapter for extended periods
while the devices are on or in use
Parts of the devices become hot. Leaving
the devices in direct contact with the skin
for extended periods may result in low-
temperature burns.
•
•
Put the battery in the battery case before
transporting it. Do not transport or store
with metal objects such as necklaces or
hairpins.
The battery is prone to leakage when fully
discharged. To avoid damage to the
product, be sure to remove the battery
when no charge remains.
Discontinue use immediately should you
notice any change in the battery, such as
discoloration or deformation.
If liquid from the damaged battery
comes in contact with clothing or skin,
rinse immediately with plenty of water.
•
•
Observe caution when handling
the battery
The battery may leak, overheat, or explode if
improperly handled. Observe the following
precautions when handling the battery for
use in this product:
Observe the following precautions
when handling the Charging AC
Adapter
Keep dry. Failure to observe this
precaution could result in fire or electric
shock.
•
Before replacing the battery, turn the
product off. If you are using the Charging
AC Adapter/AC adapter, be sure it is
unplugged.
•
•
•
•
Use only a Rechargeable Li-ion Battery
EN-EL19 (included). Charge the battery
by using a camera that supports battery
charging or by using a Battery Charger
MH-66 (available separately). To charge
the battery with the camera, use either
Charging AC Adapter EH-70P (included)
or the Charge by computer function.
When inserting the battery, do not
attempt to insert it upside down or
backwards.
Dust on or near the metal parts of the
plug should be removed with a dry cloth.
Continued use could result in fire.
Do not handle the plug or go near the
Charging AC Adapter during lightning
storms. Failure to observe this precaution
could result in electric shock.
Do not damage, modify, forcibly tug or
bend the USB cable, place it under heavy
objects, or expose it to heat or flames.
Should the insulation be damaged and the
wires become exposed, take it to a Nikon-
authorized service representative for
inspection. Failure to observe these
precautions could result in fire or electric
shock.
•
•
•
Do not short or disassemble the battery or
attempt to remove or break the battery
insulation or casing.
•
•
Do not expose the battery to flame or to
excessive heat.
Do not immerse in or expose to water.
ix
•
•
Do not handle the plug or Charging AC
Adapter with wet hands. Failure to
observe this precaution could result in
electric shock.
Do not use with travel converters or
adapters designed to convert from one
voltage to another or with DC-to-AC
inverters. Failure to observe this
precaution could damage the product or
cause overheating or fire.
Do not operate the flash with the
flash window touching a person or
object
Failure to observe this precaution could
result in burns or fire.
Avoid contact with liquid crystal
Should the monitor break, care should be
taken to avoid injury caused by broken glass
and to prevent liquid crystal from the
monitor touching the skin or entering the
eyes or mouth.
Use appropriate cables
Turn the power off when using
inside an airplane or the hospital
Turn the power off while inside the airplane
during take off or landing. Follow the
instructions of the hospital when using
while in a hospital. The electromagnetic
waves given out by this camera may disrupt
the electronic systems of the airplane or the
instruments of the hospital. Remove the
Eye-Fi card, which can be the cause of the
disruption, beforehand if inserted in the
camera.
When connecting cables to the input and
output jacks, use only the cables provided
or sold by Nikon for the purpose, to
maintain compliance with product
regulations.
Handle moving parts with care
Be careful that your fingers or other objects
are not pinched by the lens cover or other
moving parts.
CD-ROMs
The CD-ROMs included with this device
should not be played back on audio CD
equipment. Playing CD-ROMs on an audio
CD player could cause hearing loss or
damage the equipment.
3D Images
Do not continuously view 3D images
recorded with this device for extended
periods, whether on a television, monitor, or
other display.
Observe caution when using the
flash
In the case of children whose visual systems
are still maturing, consult a pediatrician or
ophthalmologist prior to use and follow
their instructions.
Prolonged viewing of 3D images may cause
eye strain, nausea, or discomfort. Cease use
should any of these symptoms occur and
consult a physician if necessary.
Using the flash close to your subject’s eyes
could cause temporary visual impairment.
Particular care should be observed if
photographing infants, when the flash
should be no less than 1 m (3 ft 4 in.) from
the subject.
x
Notices
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
Notices for Customers in the
U.S.A.
IMPORTANT SAFETY
INSTRUCTIONS -
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A.,
use an attachment plug adapter of the
proper configuration for the power outlet if
needed.
The power supply unit is intended to be
correctly orientated in a vertical or floor
mount position.
•
•
•
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/television technician for help.
Federal Communications
Commission (FCC) Radio
Frequency Interference
Statement
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide
CAUTIONS
Modifications
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
The FCC requires the user to be notified that
any changes or modifications made to this
device that are not expressly approved by
Nikon Corporation may void the user’s
authority to operate the equipment.
xi
Interface Cables
Notices for customers in Europe
CAUTIONS
Use the interface cables sold or provided by
Nikon for your equipment. Using other
interface cables may exceed the limits of
Class B Part 15 of the FCC rules.
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Notice for customers in the State of
California
WARNING
This symbol indicates that this
product is to be collected
separately.
The following apply only to users
in European countries:
Handling the cord on this product will
expose you to lead, a chemical known to
the State of California to cause birth defects
or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
•
This product is designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
•
For more information, contact the retailer
or the local authorities in charge of waste
management.
Tel: 631-547-4200
This symbol on the battery
indicates that the battery is to be
collected separately.
The following apply only to users
in European countries:
Notice for customers in Canada
CAUTION
This Class B digital apparatus complies with
Canadian ICES-003.
•
All batteries, whether marked with this
symbol or not, are designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
ATTENTION
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
•
For more information, contact the retailer
or the local authorities in charge of waste
management.
xii
Wi-Fi (Wireless LAN Network)
This product is controlled by the United States Export Administration Regulations, and you
are required to obtain permission from the United States government if you export or re-
export this product to any country to which the United States embargoes goods. The
following countries were subject to embargo: Cuba, Iran, North Korea, Sudan, and Syria. Since
the target countries are subject to change, please contact the United States Department of
Commerce for the latest information.
Restrictions on Wireless Devices
The wireless transceiver included in this product conforms to wireless regulations in the
country of sale and is not for use in other countries (products purchased in the EU or EFTA can
be used anywhere within the EU and EFTA). Nikon does not accept liability for use in other
countries. Users who are unsure as to the original country of sale should consult with their
local Nikon service center or Nikon-authorized service representative. This restriction applies
to wireless operation only and not to any other use of the product.
Notice for Customers in the U.S.A. and Canada
Federal Communications Commission (FCC) and Industry of Canada (IC)
Declaration of Conformity
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of this device.
FCC/IC RF Exposure Statement
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
The available scientific evidence does not show that any health problems are associated with
using low power wireless devices. There is no proof, however, that these low power wireless
devices are absolutely safe. Low power wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce
health effects (by heating tissue), exposure of low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF exposures have
not found any biological effects. Some studies have suggested that some biological effects
might occur, but such findings have not been confirmed by additional research.
xiii
COOLPIX S5200 (FCC ID:CGJ6149EB/IC ID:4634A-6149EB) has been tested and found to
comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-
102 of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that was
uploaded to FCC website.
Declaration of Conformity
Hereby, Nikon Corporation, declares that COOLPIX S5200 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at http://imaging.nikon.com/support/pdf/DoC_S5200.pdf.
Notice for Customers in Singapore
This device complies with radio-frequency regulations.
Complies with
IDA Standards
DA103423
Notice for customers in the Hashemite Kingdom of Jordan
This device complies with radio-frequency regulations.
The grant number is shown as below.
TRC/LPD/2013/6
Notice for customers in the Sultanate of Oman
This device complies with radio-frequency regulations.
OMAN - TRA
R/0965/13
D080093
xiv
Notice for customers in the United Arab Emirates
This device complies with radio-frequency regulations.
TRA
REGISTERED No.
ER0102520/13
DEALER No.
DA0087468/12
Precautions when Using Radio Transmissions
•
Always keep in mind that radio transmission or reception of data is subject to interception
by third parties. Note that Nikon is not responsible for data or information leaks that may
occur during data transfer.
•
The operating frequency band of this equipment is used by industrial, scientific, consumer
and medical equipment including microwave ovens, premises radio stations for
identifying mobile units used in the manufacturing lines of plants (radio stations requiring
no license), and amateur radio stations (hereinafter referred to as “another station”). 1.
Before using this equipment, confirm that another station is not being operated nearby. 2.
In the event of this equipment causing harmful radio wave interference with another
station, promptly change the operating frequency or stop radio wave emission by turning
off the power, etc. 3. If you have further questions, contact a Nikon service center or Nikon
authorized service representative.
Personal Information Management and Disclaimer
•
User information registered and configured on the product, including wireless LAN
connection settings and other personal information, is susceptible to alteration and loss
resulting from operational error, static electricity, accident, malfunction, repair or other
handling. Always keep separate copies of important information. Nikon is not responsible
for any direct or indirect damages or lost profits resulting from alteration or loss of content
that is not attributable to Nikon.
•
Before discarding this product or transferring it to another owner, perform Reset all in the
product, including wireless LAN connection settings and other personal information.
xv
Table of Contents
Scene Mode (Shooting Suited to Scenes)
................................................................................. 40
To View a Description (Help Display) of
Each Scene ................................................................. 41
Special Effects Mode (Applying Effects
When Shooting) ................................................ 51
Smart Portrait Mode (Capturing Images of
Smiling Faces) .................................................... 53
Features That Can Be Set Using the Multi
Selector................................................................. 56
Adjusting Brightness (Exposure
The Basics of Shooting and Playback
Preparation 4 Setting the Display Language,
Date, and Time................................................... 20
Compensation)........................................................ 64
xvi
Features That Can Be Set with the d
Options Available in the Shooting Menu
........................................................................................... 68
Features That Cannot Be Used
Features That Can Be Set with the d
Button (Setup Menu)..................................... 104
Simultaneously.................................................. 70
Using the Wi-Fi (Wireless LAN) Feature
Installing the Software on the Smart Device
............................................................................... 108
Connecting the Smart Device to the Camera
............................................................................... 109
Selecting Certain Types of Images for
Using Easy Panorama (Shooting and
Viewing Images Captured with Easy
Playback ............................................................... 82
Features That Can Be Set with the d
Button (Playback Menu)................................. 84
Connecting the Camera to a TV, Computer,
or Printer .............................................................. 86
Panorama .............................................................. E5
Viewing and Deleting Images Captured
Continuously (Sequence)........................ E13
Features That Can Be Set with the d
Button (Movie Menu) .......................................... 99
xvii
Quick Retouch: Enhancing Contrast and
Saturation........................................................... E20
D-Lighting: Enhancing Brightness and
Contrast .............................................................. E20
Glamour Retouch: Enhancing Human Faces
with Eight Effects........................................... E21
Small Picture: Reducing the Size of an
Connecting the Camera to a TV (Viewing
Images on a TV) .......................................... E26
Connecting the Camera to a Printer (Direct
Print) ............................................................... E29
Connecting the Camera to a Printer
.................................................................................. E30
The Shooting Menu (for A (Auto) Mode)
.......................................................................... E40
Image Mode Settings (Image Size and
Print Order (Creating a DPOF Print Order)
.................................................................................. E60
Copy (Copy Between Internal Memory and
Memory Card).................................................. E71
Print Date (Imprinting Date and Time)
Quality) ................................................................ E40
.................................................................................. E88
xviii
Maximizing Camera Life and Performance
.............................................................................. F2
xix
xx
Parts of the Camera
This chapter describes the parts of the camera and explains information that is displayed in
the monitor.
Attaching the Camera Strap...........................................................................................5
Shooting Mode....................................................................................................................8
Playback Mode ................................................................................................................. 10
If you want to start using the camera right away, see “The Basics of Shooting and
1
1
2
6
7
8
9
Lens
Zoom control........................................................ 29
Lens cover
Eyelet for camera strap.......................................5
3
Flash............................................................................ 57
USB/audio/video output connector
12
4
Self-timer lamp..................................................... 60
AF-assist illuminator....................................... 104
5
3
1
2
3
4
5
16
6
7
8
9
15
14
13
12
11 10
4
Flash lamp............................................................... 57
Battery-chamber/
1
9
2
3
4
5
6
7
8
Power connector cover (for connection
13
15 Tripod socket
Attaching the Camera Strap
5
Using Menus (the d Button)
Use the multi selector and k button to navigate the menus.
1
Press the d button.
2
Press the multi selector J.
•
The menu is displayed.
•
The current menu icon is displayed in
yellow.
Shooting menu
Image mode
White balance
Continuous
25
m
0s
ISO sensitivity
Color options
AF area mode
890
Menu icons
3
Press H or I to select the
desired menu icon.
4
Press the k button.
•
The menu options become selectable.
•
The menu is changed.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
Vibration reduction
Motion detection
6
5
7
Press H or I to select a menu
option.
6
8
Press the k button.
•
The settings for the option you
selected are displayed.
Vibration reduction
Welcome screen
Time zone and date
Monitor settings
Print date
On
Off
Vibration reduction
Motion detection
AF assist
Press H or I to select a
setting.
Press the k button.
•
•
The setting you selected is applied.
When you are finished using the menu,
press the d button.
Vibration reduction
On
Off
C Notes About Setting Menu Options
• Certain menu options cannot be set depending on the current shooting mode or the state of the
camera. Unavailable options are displayed in gray and cannot be selected.
• When a menu is displayed, you can switch to shooting mode by pressing the shutter-release
button, A (shooting mode) button, or b (e movie-record) button.
7
The Monitor
The information that is displayed in the monitor during shooting and playback changes
depending on the camera’s settings and state of use.
By default, information is displayed when the camera is first turned on and when you operate
the camera, and turns off after a few seconds (when Photo info is set to Auto info in
Shooting Mode
41
40
10
7
2
39
8
9
2
4
5
38
37
1
3
6
10
36
11
35
10
13
12
14 15
34
33
32
29
m
0s
16
+1.0
31
400
1/250
24
F3.5
999
30
17
23 22 20
999
9999
21
25
29 28 27 26
18
19
8
1
2
3
4
5
6
7
8
9
Macro mode .......................................................... 62
Focus indicator..................................................... 30
AE/AF-L indicator................................................ 49
Quick effects icon............................................... 69
Flash mode............................................................. 57
Battery level indicator...................................... 24
Focus area (face detection,
28
“Date not set” indicator
14
Movie options (normal speed movies)
16
Number of exposures remaining
21
9
1
2
3
Time of recording............................................... 20
(a) Current image number/
total number of images.........................32
16
Album icon in favorite pictures mode
4
Easy panorama playback guide
18
Category icon in auto sort mode
5
6
7
8
Battery level indicator...................................... 24
Eye-Fi communication indicator
9
Sequence display (when Individual
26
11
12
The Basics of Shooting and
Playback
Preparation
Preparation 1 Insert the Battery .....................................................................................14
Preparation 2 Charge the Battery ..................................................................................16
Preparation 3 Insert a Memory Card.............................................................................18
Shooting
Step 1 Turn the Camera On..............................................................................................24
Step 2 Select a Shooting Mode.......................................................................................26
Step 3 Frame a Picture .......................................................................................................28
Step 4 Focus and Shoot.....................................................................................................30
Playback
Step 5 Play Back Images ....................................................................................................32
Step 6 Delete Images..........................................................................................................34
13
Preparation 1 Insert the Battery
1
Open the battery-chamber/memory card slot
cover.
2
Insert the included EN-EL19 battery
(rechargeable Li-ion battery).
Battery latch
•
Use the battery to push the orange battery
latch in the direction indicated by the arrow
(1), and fully insert the battery (2).
•
When the battery is inserted correctly, the
battery latch will lock the battery in place.
BInserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be sure to
check that the battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
•
Charge the battery before the first use or when the battery
is running low. See “Preparation 2 Charge the Battery”
14
Removing the Battery
Turn the camera off and be sure that the power-on lamp and the
monitor have turned off before opening the battery-chamber/
memory card slot cover.
To eject the battery, open the battery-chamber/memory card slot
cover and slide the orange battery latch up in the direction
indicated by the arrow (1). The battery can then be removed by
hand (2). Do not pull it at an angle.
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
B Notes About the Battery
use.
15
Preparation 2 Charge the Battery
1
Prepare the included Charging AC Adapter EH-70P.
If a plug adapter* is included with your camera, attach the plug adapter
to the plug on the Charging AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the two are connected, attempting
to forcibly remove the plug adapter could damage the product.
*
The shape of the plug adapter varies according to the country or
region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter attached in
Argentina and Korea.
2
Make sure the battery is installed in the camera, and then connect the
camera to the Charging AC Adapter in order of 1 to 3.
•
Keep the camera turned off.
•
Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do
not use force when connecting or disconnecting the plugs.
Electrical outlet
Charge lamp
USB cable (included)
•
•
•
•
The charge lamp slowly flashes green to indicate that the battery is charging.
About 3 hours are required to charge a fully exhausted battery.
When the battery has been completely charged, the charge lamp turns off.
16
3
Disconnect the Charging AC Adapter from the electrical outlet and
then disconnect the USB cable.
The Charge Lamp
Status
Description
Flashes slowly (green) The battery is charging.
The battery is not charging. When charging is complete, the charge lamp
stops flashing green and turns off.
Off
•
•
The ambient temperature is not suited to charging. Charge the battery
indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F).
The USB cable or Charging AC Adapter is not properly connected, or
there is a problem with the battery. Disconnect the USB cable or
unplug the Charging AC Adapter and correctly connect it again, or
change the battery.
Flashes quickly
(green)
B Notes About the Charging AC Adapter
C Charging Using a Computer or Battery Charger
• You can also charge the Rechargeable Li-ion Battery EN-EL19 by connecting the camera to a
without using the camera.
C Operating the Camera During Charging
If you press the power switch or hold down the c (playback) button while using the Charging AC
Adapter to charge the battery in the camera, the camera turns on in playback mode and you can
play back images. Shooting is not possible.
17
Preparation 3 Insert a Memory Card
1
Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
•
Be sure to turn off the camera before opening the cover.
2
Insert the memory card.
Memory card slot
•
Slide the memory card in until it clicks into place.
BInserting the Memory Card Correctly
Inserting the memory card upside down or
backwards could damage the camera and the
memory card. Be sure to check that the memory
card is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
18
B Formatting Memory Cards
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
•
All data stored on a memory card is permanently deleted when the card is formatted.
If there is data saved on the memory card that you wish to keep, copy that data to a computer
before formatting.
• To format a memory card, insert the card into the camera, press the d button, and select
B Notes About Memory Cards
information.
Removing Memory Cards
Turn the camera off and be sure that the power-on lamp and the
monitor have turned off before opening the battery-chamber/
memory card slot cover.
Gently push the memory card into the camera (1) to partially
eject the card, and then remove the card (2). Do not pull it at an
angle.
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
Internal Memory and Memory Cards
Camera data, including images and movies, can be saved in either the camera’s internal
memory (approximately 25 MB) or on a memory card. To use the camera’s internal memory
for shooting or playback, first remove the memory card.
19
Preparation 4 Setting the Display Language, Date, and Time
When the camera is turned on for the first time, the language-selection screen and the date
and time setting screen for the camera clock are displayed.
1
Press the power switch to turn on the camera.
•
When the camera is turned on, the power-on lamp (green)
will light and then the monitor will turn on (the power-on
lamp turns off when the monitor turns on).
2
Press the multi selector H or I
to select the desired language
and press the k button.
Language
Cancel
3
Press H or I to select Yes and press the k
button.
Time zone and date
Choose time zone and
set date and time?
Yes
No
Cancel
20
4
Press J or K to select your home
time zone and press the k
button.
London, Casablanca
•
To enable daylight saving time, press H.
When the daylight saving time function is
enabled, W is displayed above the map.
To turn off the daylight saving time
function, press I.
Back
5
6
7
Press H or I to select the date format and
press the k button or K.
Date format
Year/Month/Day
Month/Day/Year
Day/Month/Year
Press H, I, J, or K to set the date and time,
and press the k button.
Date and time
D
0 1
M
0 1
Y
2 01 3
•
Select a field: Press K or J (changes between D, M, Y,
hour, and minute).
0 0
0 0
•
•
Edit the date and time: Press H or I.
Confirm the setting: Select the minute field and press the
k button or K.
Edit
Press H or I to select Yes and press the k
button.
Date and time
15/05
/
2013 15:30
•
When settings are finished, the lens extends and the camera
switches to shooting mode.
OK?
Yes
No
21
C Changing the Language Setting and the Date and Time Setting
• You can change these settings using the Language and Time zone and date settings in the
• You can enable or disable daylight saving time in the z setup menu by selecting Time zone and
date followed by Time zone. Press the multi selector K and then H to enable daylight saving
time and move the clock forward one hour; press I to disable daylight saving time and move the
clock back one hour. When the travel destination (x) is selected, the time difference between the
travel destination and the home time zone (w) is automatically calculated and the date and time
in the selected region are saved at the time of shooting.
• If you exit without setting the date and time, O will flash when the shooting screen is displayed.
C The Clock Battery
• The camera’s clock is powered by a built-in backup battery.
The backup battery charges when the main battery is inserted into the camera or when the
camera is connected to an optional AC adapter, and it can run the clock for several days after
about ten hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
Setting the Display Language, Date, and Time” for more information.
C Imprinting the Shooting Date on Printed Images
• Set the date and time before shooting.
• You can permanently imprint the shooting date on images as they are captured by setting Print
• If you want the shooting date to be printed without using the Print date setting, print using the
22
23
Step 1 Turn the Camera On
1
Press the power switch to turn on the camera.
•
The lens extends and the monitor turns on.
2
Check the battery level indicator and the number of exposures
remaining.
Battery level indicator
Battery level indicator
Display
Description
b
The battery level is high.
The battery level is low. Prepare to
charge or replace the battery.
B
25
m
0s
The camera cannot take images.
Recharge or replace with a fully
charged battery.
N
890
Battery exhausted.
Number of exposures
remaining
Number of Exposures Remaining
The number of images that can be taken is displayed.
•
C is displayed when no memory card is inserted in the camera, and images will be saved in
the internal memory (approximately 25 MB).
•
The number of exposures remaining depends on the amount of available memory in the
internal memory or memory card, and also varies depending on the image quality and
24
Turning the Camera On and Off
•
•
•
When the camera is turned on, the power-on lamp (green) will light and then the monitor
will turn on (the power-on lamp turns off when the monitor turns on).
To turn off the camera, press the power switch. When the camera turns off, the power-on
lamp and the display turn off.
To turn the camera on in playback mode, press and hold the c (playback) button. The
lens will not extend.
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for approximately another
three minutes, the camera will turn off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the following
operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
Flashes
No operations
performed
No operations
performed
25
m
0s
3 min
890
Camera enters
standby mode.
Camera turns off.
• The time that elapses before the camera enters standby mode can be changed using the Auto off
• By default, the camera enters standby mode in about one minute when you are using shooting
mode or playback mode.
• If you are using the optional AC Adapter EH-62G, the camera enters standby mode after
30 minutes (fixed).
C Notes About an AC Power Source
from an electrical outlet for taking images and playing back images.
• Do not, under any circumstances, use another make or model of AC adapter other than the EH-62G.
Failure to observe this precaution could result in overheating or in damage to the camera.
25
Step 2 Select a Shooting Mode
1
Press the A button.
•
The shooting mode selection menu, which allows
you to select the desired shooting mode, is
displayed.
2
Press the multi selector H or I
to select a shooting mode and
press the k button.
Auto mode
•
•
A (auto) mode is used in this example.
The shooting mode setting is saved even
after the camera is turned off.
26
Available Shooting Modes
A
Auto mode
the shooting conditions and the type of shot you want to capture.
x
Scene mode
Camera settings are optimized according to the scene that you select. When using scene
auto selector, the camera automatically selects the optimum scene mode when you
frame an image, making it even easier to take images using settings that suit the scene.
•
To select a scene, first display the shooting mode selection menu and then press the
multi selector K. Select the desired scene by pressing H, I, J, or K, and then press
the k button.
D
Special effects
Effects can be applied to images during shooting. Twelve different effects are available.
•
To select an effect, first display the shooting mode menu and then press the multi
selector K. Select the desired effect by pressing H, I, J, or K, and then press the k
button.
F
Smart portrait
When the camera detects a smiling face, you can take an image automatically without
pressing the shutter-release button (smile timer). You can also use the skin softening
option to smooth the skin tones of human faces.
C Changing the Shooting Settings
information.
27
Step 3 Frame a Picture
1
Hold the camera steady.
•
Keep fingers, hair, the camera strap, and other objects away
from the lens, flash, AF assist-illuminator, microphone, and
speaker.
•
When taking images in portrait (“tall”) orientation, turn the
camera so that the flash is above the lens.
2
Frame the picture.
•
Aim the camera at the desired subject.
•
When the camera detects the main subject, the focus area
is displayed (default setting).
25
m
0s
890
Focus area
28
C When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations.
- When using the telephoto setting
camera during shooting.
Using the Zoom
Use the zoom control to activate optical zoom.
Zoom out
Zoom in
•
To zoom in closer to the subject, rotate the zoom control
to g (telephoto).
To zoom out and view a larger area, rotate the zoom
control to f (wide-angle).
•
When you turn the camera on, the zoom moves to the
maximum wide-angle position.
•
•
A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.
Digital zoom, which allows you to further magnify the
subject up to approximately 4× the maximum optical
zoom ratio, can be activated by rotating and holding the
Optical Digital
zoom zoom
zoom control to g when the camera is zoomed in to the maximum optical zoom position.
C Digital Zoom and Interpolation
While using digital zoom, the image quality decreases due to
interpolation when the zoom is increased beyond the V position. Since
the position of V moves to the right as the size of an image decreases,
you to zoom in further without decreasing the image quality due to
interpolation.
Small image size
29
Step 4 Focus and Shoot
1
Press the shutter-release button halfway
•
When the camera detects the main subject, it focuses
on that subject. When the subject is in focus, the focus
area that is in focus lights in green (up to three areas).
information.
•
•
When you are using digital zoom, the camera focuses on
the subject in the center of the frame and the focus area is
not displayed. When the camera has focused, the focus
While the shutter-release button is pressed halfway, the
focus area or focus indicator may flash red. This indicates
that the camera is unable to focus. Modify the composition
and press the shutter-release button halfway again.
1/250
F3.5
2
3
Press the shutter-release button the rest of
•
The shutter is released and the image will be saved.
To apply an effect to the captured image,
press the k button.
Quick effects
•
The screen for selecting an effect is displayed. See “Using
•
When you press the d button or when no operations
are performed for about five seconds, the monitor display
returns to the shooting screen.
Cancel
Choose effect
•
To not display the screen shown on the right, set Quick
30
The Shutter-release Button
To set focus and exposure (shutter speed and aperture value),
press the shutter-release button lightly until you feel a slight
resistance. Focus and exposure remain locked while the shutter-
release button is pressed halfway.
Press halfway
While pressing the shutter-release button halfway, press the
shutter-release button the rest of the way down to release the
shutter and take an image.
Do not use force when pressing the shutter-release button, as this
may result in camera shake and blurred images. Press the button
gently.
Press all the
way
B Notes About Recording Images and Saving Movies
The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being recorded or while a movie is being saved. Do not open
the battery-chamber/memory card slot cover or remove the battery or memory card while an
indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
B Notes About Focusing
C AF-assist Illuminator and Flash
If the subject is dimly lit, the AF-assist illuminator (A104) may light when the shutter-release button
way down.
C To Make Sure You Do Not Miss a Shot
If you are concerned that you might miss a shot, press the shutter-release button all the way without
first pressing it halfway.
31
Step 5 Play Back Images
1
Press the c (playback) button.
•
The camera switches to playback mode
and the last image saved will be displayed
full-frame.
c (playback)
button
2
Use the multi selector to select an image to
display.
Display the previous image
•
Display the previous image: H or J
•
Display the subsequent image: I or K
Display the next image
•
•
Remove the memory card from the camera to play back
images saved in the camera’s internal memory. C is
displayed near the current image number/total number of
images display.
To return to shooting mode, press the A button, the
shutter-release button, or the b (e movie-record)
button.
15
/
05 2013 15:30
/
0004. JPG
4
/
4
Current image number/
total number of images
32
C Viewing Images
• Images may be displayed briefly at low resolution immediately after switching to the next or
previous image.
shooting are displayed in full-frame playback mode, depending upon the orientation of the
detected face, the images may be automatically rotated for playback display (except images
captured in a series).
• Each series of images captured using continuous shooting is saved in a sequence, and by default,
k button to display them as individual images. Press H to return to the key picture only display.
C Notes About the Quick Effects Function
• When e is displayed in full-frame playback mode, you can
press k button to apply an effect to the image.
15
/
05 2013 15:30
/
0004. JPG
• When the effect selection screen is displayed, press J or K to
select an effect, press the k button, and then select Yes in the
confirmation dialog and press the k button to save the image as
a separate file.
4
/
4
C More Information
33
Step 6 Delete Images
1
Press the l button to delete the image
currently displayed in the monitor.
2
Press the multi selector H or I to select the
desired deletion method and press the k
button.
Delete
•
•
Current image: Only the current image is deleted.
Current image
Erase selected images
All images
Erase selected images: Multiple images can be selected
and deleted. See “Operating the Erase Selected Images
•
•
All images: All images are deleted.
To exit without deleting, press the d button.
3
Press H or I to select Yes and press the k
button.
Erase
1
image?
•
•
Deleted images cannot be recovered.
To cancel, press H or I to select No and press the k
button.
Yes
No
34
Operating the Erase Selected Images Screen
1
Press the multi selector J or K to select an
image to be deleted, and then press H to
display K.
Erase selected images
•
To undo the selection, press I to remove K.
•
full-frame playback or f (h) to display thumbnails.
Back
2
Add K to all images that you want to delete and then press the k
button to confirm the selection.
•
A confirmation dialog is displayed. Follow the instructions displayed in the monitor.
B Notes About Deletion
• Deleted images cannot be recovered. Copy important images to a computer or other media
before deleting them from the camera.
B Deleting Images in a Sequence
• If you press the l button and delete a key picture while only key pictures are displayed for
• To delete individual images in a sequence, press the k button to display them one at a time and
press the l button.
C Deleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
C Selecting Certain Types of Images for Deletion
images registered as favorites, images in a certain category, or images captured on a specific date for
deletion.
35
36
Shooting Features
This chapter describes the camera’s shooting modes and the features that are available when
using each shooting mode.
You can select shooting modes and adjust settings according to the shooting conditions and
the kind of images you want to capture.
............................................................................................ 51
............................................................................................ 53
Using the Flash (Flash Modes) .................................................................................... 57
Using the Self-timer........................................................................................................ 60
Using Macro Mode.......................................................................................................... 62
37
A (Auto) Mode
shooting conditions and the type of shot you want to capture.
Enter shooting mode M A (shooting mode) button M A (auto) mode M k button
•
You can change how the camera selects the area of the frame to focus on by changing the
The default setting is Target finding AF.
If the camera detects the main subject, it focuses on that subject.
If no main subject is detected, the camera automatically selects one or more of the nine
focus areas containing the subject closest to the camera. See “Using Target Finding AF”
Changing A (Auto) Mode Settings
•
•
C Camera Settings That Cannot Be Used Simultaneously
38
Using Quick Effects
When in A (auto) mode, you can apply effects to images immediately after releasing the
shutter.
•
1
Press the k button when the image is
displayed after it is taken in A (auto) mode.
Quick effects
•
When you press the d button or when no operations
are performed for about five seconds, the monitor display
returns to the shooting screen.
•
To not display the screen shown on the right, set Quick
Cancel
Choose effect
2
3
Press the multi-selector J or K to select the
desired effect and press the k button.
Quick effects
Pop
Super vivid
Painting
•
•
•
full-frame playback or f (h) to six-image thumbnail
display.
To exit without saving the edited image, press the d
button. When a confirmation screen is displayed, select
Yes and press the k button.
High key
Toy camera Toy camera
effect 1
effect 2
Cancel
Select Yes and press the k button.
•
A new, edited copy is created and the monitor display returns to the shooting screen.
•
Copies created with the quick effects function are indicated by the V icon displayed during
39
Scene Mode (Shooting Suited to Scenes)
When one of the following scenes is selected, camera settings are automatically optimized for
the selected scene.
Enter shooting mode M A (shooting mode) button M x (second icon from the top*)
M K M H, I, J, K M select a scene M k button
*
The icon of the last scene selected is displayed.
x
Scene auto selector
(default setting;
b
Portrait
c
Landscape
d
Sports
e
Night portrait
f
i
l
Party/indoor
Z
j
m
O
Beach
z
k
n
Snow
h Sunset
Dusk/dawn
Night landscape
Close-up
u
Food
Museum
Fireworks show
Black and white copy
o
Backlighting
p Easy panorama
Pet portrait
s 3D photography
Changing Scene Mode Settings
•
Depending on the scene, the multi selector H (X), I (p), J (n), and K (o) can be used
to set the corresponding features. See “Features That Can Be Set Using the Multi Selector”
•
40
To View a Description (Help Display) of Each Scene
Select the desired scene from the scene selection screen and
Easy panorama
of that scene. To return to the original screen, rotate the zoom
control to g (j) again.
Characteristics of Each Scene
x Scene auto selector
•
When you point the camera at the subject, the camera automatically selects the optimum
scene mode from the list below and adjusts the shooting settings accordingly.
e: Portrait, f: Landscape, h: Night portrait, g: Night landscape, i: Close-up, j:
Backlighting, d: Other scenes
•
•
The focus area depends on the composition of the image. When the camera detects a human
When the camera selects h (night portrait), flash mode is fixed at fill flash with slow sync and
red-eye reduction (when U (auto) is selected) and the camera captures one image at a
slower shutter speed.
•
•
When the camera selects g (night landscape), flash mode is fixed at W (off), regardless of the
setting made, and the camera captures one image at a slower shutter speed.
Depending upon shooting conditions, the camera may not select the desired scene mode.
manually.
•
Digital zoom cannot be used.
b Portrait
•
•
•
If no faces are detected, the camera focuses on the subject in the center of the frame.
The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
•
•
Digital zoom cannot be used.
41
c Landscape
•
pressed halfway.
d Sports
•
•
The camera focuses on the area in the center of the frame.
The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
•
Press and hold the shutter-release button all the way to capture up to 6 images continuously at
a rate of about 2 fps (when image mode is set to P).
•
•
Focus, exposure, and hue are fixed at the values determined with the first image in each series.
The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
e Night portrait
•
•
•
•
If no faces are detected, the camera focuses on the subject in the center of the frame.
From the screen displayed after e Night portrait is selected, select Hand-held or Tripod.
Hand-held (default setting):
-
When the e icon at the top left of the monitor lights in green, press the shutter-release
button all the way to capture a series of images which will be combined into a single image
and saved.
-
Once the shutter-release button is pressed all the way, hold the camera still until a still image
is displayed. After taking an image, do not turn the camera off before the monitor switches to
the shooting screen.
-
-
The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower
than that seen in the monitor at the time of shooting.
If the subject moves while the camera is shooting continuously, the image may be distorted,
overlapped, or blurred.
•
Tripod: Select this option when using a tripod or other means to stabilize the camera during
shooting.
-
is set to On.
-
One image is captured at a slow shutter speed when the shutter-release button is pressed all
the way.
•
•
Digital zoom cannot be used.
42
f Party/indoor
•
•
The camera focuses on the area in the center of the frame.
To avoid the effects of camera shake, hold the camera steady. Set Vibration reduction to Off
Z Beach
•
The camera focuses on the area in the center of the frame.
z Snow
•
The camera focuses on the area in the center of the frame.
h Sunset
O
O
•
The camera focuses on the area in the center of the frame.
i Dusk/dawn
•
pressed halfway.
O: Use of a tripod is recommended when using scene modes indicated with O, because the
a tripod to stabilize the camera during shooting.
43
j Night landscape
•
pressed halfway.
•
•
From the screen displayed after j Night landscape is selected, select Hand-held or Tripod.
Hand-held (default setting): Select this option to produce shots with reduced blurring and
noise even when the camera is hand-held.
-
-
-
When the j icon at the top left of the monitor lights in green, press the shutter-release
button all the way to capture a series of images which will be combined into a single image
and saved.
Once the shutter-release button is pressed all the way, hold the camera still until a still image
is displayed. After taking an image, do not turn the camera off before the monitor switches to
the shooting screen.
The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower
than that seen in the monitor at the time of shooting.
•
•
Tripod: Select this option when using a tripod or other means to stabilize the camera during
shooting.
-
is set to On.
-
One image is captured at a slow shutter speed when the shutter-release button is pressed all
the way.
Digital zoom cannot be used.
k Close-up
•
•
which it can focus.
You can move the focus area. To move the focus area, press the k button, and then press the
multi selector H, I, J, or K.
To change settings for any of the following functions, first press the k button to cancel focus-
area selection, then change the settings as desired.
-
-
-
Flash mode
Self-timer
Exposure compensation
•
The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
44
u Food
•
•
which it can focus.
You can move the focus area. To move the focus area, press the k button, and then press the
multi selector H, I, J, or K.
To change settings for any of the following functions, first press the k button to cancel focus-
area selection, then change the settings as desired.
-
-
-
Hue
Self-timer
Exposure compensation
•
•
The camera focuses even when the shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
You can adjust hue by pressing the multi selector H or I. The
hue setting is saved in the camera’s memory even after the
camera is turned off.
25
m
0s
890
l Museum
•
•
The camera focuses on the area in the center of the frame.
The camera captures a series of up to ten images while the shutter-release button is held all the
way down, and the sharpest image in the series is automatically selected and saved (BSS (Best
Shot Selector)).
•
The flash does not fire.
m Fireworks show
O
•
•
Camera focuses at infinity.
halfway.
•
The shutter speed is fixed at about four seconds.
O: Use of a tripod is recommended when using scene modes indicated with O, because the
a tripod to stabilize the camera during shooting.
45
n Black and white copy
•
•
The camera focuses on the area in the center of the frame.
o Backlighting
•
•
The camera focuses on the area in the center of the frame.
From the screen displayed after o Backlighting is selected, select On or Off to enable or
disable the high dynamic range (HDR) function based on the type of image you want to take.
Off (default setting): The flash fires to prevent the subject from being hidden in shadow.
•
•
-
When the shutter-release button is pressed all the way down, one image is captured.
On: Use when taking images with very bright and dark areas in the same frame.
-
When the shutter-release button is pressed all the way, the camera shoots images
continuously at high speed, and saves the following two images.
-
A non-HDR composite image
-
An HDR composite image in which the loss of details in highlights or shadows is minimized
-
-
The second image saved is an HDR composite image. If there is only enough memory to save
areas of the image are corrected, is the only image saved.
Once the shutter-release button is pressed all the way, hold the camera still until a still image is
displayed. After taking an image, do not turn the camera off before the monitor switches to
the shooting screen.
-
-
The angle of view (i.e., the area visible in the frame) seen in the saved image will be narrower
than that seen in the monitor at the time of shooting.
Digital zoom cannot be used.
46
p Easy panorama
•
•
•
Allows you to take a panorama image simply by moving the camera in the desired direction.
The camera focuses on the area in the center of the frame when shooting starts.
From the screen displayed after p Easy panorama is selected, select the shooting range from
Normal (180°) or Wide (360°).
•
Press the shutter-release button all the way down, remove your finger from the button, and
then slowly pan the camera horizontally. Shooting automatically ends when the camera
captures the specified shooting range.
•
•
The zoom position is fixed at wide-angle.
If you press the k button when an image captured using easy panorama is displayed in full-
frame playback mode, the image scrolls automatically.
B Notes About Printing Panorama Images
When printing panorama images, the entire image may not be able to be printed depending on the
printer’s settings. Additionally, printing may not be possible depending on the printer.
See the documentation provided with the printer or consult the digital photo lab for details.
47
O Pet portrait
•
•
When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it.
By default, the shutter is automatically released when focus is acquired (pet portrait auto release).
From the screen displayed after O Pet portrait is selected, select Single or Continuous.
-
-
Single: Images are captured one at a time.
Continuous: When focus is acquired on the detected face, the camera automatically releases
the shutter 3 times. When you manually release the shutter, up to 6 images can be
continuously taken while the shutter-release button is held down. The frame rate for
continuous shooting is about 2 fps (when Image mode is set to P 4608×3456).
B Pet Portrait Auto Release
• To change the Pet portrait auto release settings, press the multi selector J (n).
- Y: When the camera detects a pet face, it focuses on the face and then releases the shutter
automatically.
-
OFF: The camera does not release the shutter automatically, even if a pet face is detected. Press
If the camera detects a human face and a pet face in the same shot, it focuses on the pet face.
• Pet portrait auto release turns off automatically when:
- Five bursts have been taken.
- Internal memory or the memory card is full.
To resume shooting with Pet portrait auto release, press the multi selector J (n) to turn it on again.
B Focus Area
• When the camera detects a face, a yellow double border (focus
area) is displayed around the face, and the double border turns
green when the camera has focused.
• When the camera detects more than one dog or cat face (up to
five can be detected), the face displayed largest in the monitor is
framed by a double border and the others by single borders.
• If no pet or human faces are detected, the camera focuses on the
subject in the center of the frame.
25
m
0s
890
B Notes About Pet Portrait
• Digital zoom cannot be used.
• Depending on the distance of the pet from the camera, the speed of the pet’s movement, the
direction the pet is facing, the ambient brightness around its face, etc., the pet face may not be
detected and other subjects may be displayed with a border.
48
s 3D photography
•
The camera captures one image for each eye to simulate a three-dimensional image on a 3D-
compatible TV or monitor.
•
The focus area can be moved from the center of the frame to a different position.
To move the focus area, before taking the first image, press the k button, and then press the
multi selector H, I, J, or K.
To change settings for any of the following functions, first press the k button to cancel focus-
area selection, then change the settings as desired.
-
-
Macro mode
Exposure compensation
•
After taking the first image by pressing the shutter-release
button, move the camera horizontally to the right so that the
subject is aligned with the guide in the monitor. The camera
captures the second image automatically when it detects that
they are aligned.
•
•
The focus, exposure, and white balance are locked after the first
shot, and R is displayed in the monitor.
The angle of view (i.e., the area visible in the frame) seen in the
saved image will be narrower than that seen in the monitor at
the time of shooting.
Cancel
•
•
Images captured in this mode are saved at an image size of n (1920 × 1080).
The two captured images are saved as a 3D image (MPO file). The first image (the left eye image)
is also saved as a JPEG file.
B Notes About Taking 3D Images
• Moving subjects are not suited to 3D photography.
• Images have a less pronounced 3D feel as the distance between the camera and background is
increased.
• Images may have a less pronounced 3D feel when the subject is dark or when the second image is
not aligned precisely.
• Images captured under dim lighting may appear grainy with noise.
• The maximum telephoto zoom position is limited to an angle of view equivalent to that of 118.9
mm lens in 35mm [135] format.
• Shooting is canceled after the first shot if the k button is pressed or the subject is not aligned
with the guide within approximately ten seconds.
• If the camera does not take the second image and cancels the shooting even when you align the
guide with the subject, try shooting with the shutter-release button.
• Movies cannot be recorded in 3D.
49
B Playing Back 3D Images
• 3D images cannot be played back in 3D on the camera monitor. Only the left eye image of a 3D
image is displayed during playback.
• To view 3D images in 3D, a 3D-compatible TV or monitor is required. Use a 3D-compatible HDMI
as follows:
-
-
HDMI: Auto (default setting) or 1080i
HDMI 3D output: On (default setting)
• When the camera is connected via HDMI and images are played back, it may take a while to
display images when switching between 3D images and non-3D images. Playback zoom is not
possible while images are played back in 3D.
• Refer to the documentation included with the TV or monitor for details on how to make the settings.
B Caution for Viewing 3D Images
When viewing 3D images on a 3D-compatible TV or monitor for an extended period of time, you
may experience discomfort such as eye strain or nausea. Carefully read the documentation included
with your TV or monitor to ensure proper use.
50
Special Effects Mode (Applying Effects When Shooting)
Effects can be applied to images during shooting.
Enter shooting mode M A (shooting mode) button M D (third icon from the top*) M
K M H, I, J, K M select an effect M k button
*
The icon of the last effect selected is displayed.
The following 12 effects are available.
Category
Description
D Soft*
(default setting)
Softens the image by adding a slight blur to the entire image.
Adds a sepia tone and reduces the contrast to simulate the qualities of an
old photograph.
E Nostalgic sepia*
F High-contrast
monochrome
Changes the image to black and white and gives it sharp contrast.
G High key
H Low key
I Selective color
l Pop
Gives the entire image a bright tone.
Gives the entire image a dark tone.
Creates a black and white image in which only the specified color remains.
Increases the color saturation of the entire image to create a bright look.
Increases the color saturation of the entire image and sharpens the
contrast.
k Super vivid
h Painting
Gives the image a painting-like appearance.
m Toy camera effect
1
Gives the entire image a yellowish hue and darkens the image periphery.
n Toy camera
effect 2
Decreases the color saturation of the entire image and darkens the image
periphery.
o Cross process
Gives the image a mysterious appearance based on a specific color.
*
to use both settings at the same time, only the setting made first is enabled.
51
•
•
The camera focuses on the area in the center of the frame.
When Selective color or Cross process is selected, press
the multi selector H or I to select the desired color from
the slider.
To change settings for any of the following functions, first
press the k button to cancel color selection, then change
the settings as desired.
-
-
-
-
Save
Slider
To return to the color selection screen, press the k button
again.
Changing Special Effects Mode Settings
•
•
52
Smart Portrait Mode (Capturing Images of Smiling Faces)
When the camera detects a smiling face, you can take an image automatically without
pressing the shutter-release button (smile timer). You can use the skin softening option to
smooth the skin tones of human faces.
Enter shooting mode M A (shooting mode) button M F Smart portrait mode M k
button
1
2
Frame the image.
•
Without pressing the shutter-release button, wait for the subject to
smile.
•
If the camera detects that the face framed by the double border is smiling, the shutter is
•
After the camera releases the shutter, it will continue to detect faces and smiles, and will
release the shutter again if it detects a smiling face.
3
End shooting.
•
Any one of the following operations can be used to cancel smile detection and stop
shooting.
-
-
-
Press the A button and select a different shooting mode.
Turn the camera off.
B Notes About Smart Portrait Mode
• Digital zoom cannot be used.
• Under some shooting conditions, the camera may be unable to detect faces or detect smiles.
53
C Auto Power Off in Smile Timer Mode
When Smile timer is set to On (single), On (continuous), or On (BSS), the auto power off
persists and no other operations are performed.
• The camera does not detect any faces.
• The camera detected a face, but cannot detect a smile.
C When the Self-timer Lamp Flashes
When using smile timer, the self-timer lamp flashes when the camera detects a face and flashes
quickly immediately after the shutter is released.
C Releasing the Shutter Manually
The shutter can also be released by pressing the shutter-release button. If no faces are detected, the
camera focuses on the subject at the center of the frame.
Changing Smart Portrait Mode Settings
•
•
C Camera Settings That Cannot Be Used Simultaneously
54
Using Skin Softening
When the shutter is released while using one of the shooting modes listed below, the camera
detects up to three human faces and processes the image to soften facial skin tones.
•
selected.
•
Editing functions such as Skin softening can be applied to saved images by using Glamour
B Notes About Skin Softening
• It may take more time than usual to save images after shooting.
• Under some shooting conditions, the desired skin softening results may not be achieved, and skin
softening may be applied to areas of the image where there are no faces.
• The skin softening level cannot be adjusted when shooting in Portrait or Night portrait scene
mode, or when the camera selects one of these scenes while in scene auto selector scene mode.
55
Features That Can Be Set Using the Multi Selector
When shooting, the multi selector H, I, J, and K can be used to set the following features.
X (flash mode)
n (self-timer),
pet portrait auto release
o (exposure compensation)
p (macro mode)
Available Features
The features that are available vary with the shooting mode, as shown below.
•
Special
effects
Smart
portrait
A (auto)
Scene
X
w
w
w
w
w2
w2
n
Pet portrait auto release
–
–
–
–
1
p
o
w
w
w
w
Exposure compensation
w
1
2
56
Using the Flash (Flash Modes)
You can set the flash mode to match the shooting conditions.
1
2
Press the multi selector H (m flash mode).
Press H or I to select the desired mode and
press the k button.
Auto
•
•
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
•
When U (auto) is applied, D is only displayed for a
few seconds, regardless of the setting in Monitor settings
B The Flash Lamp
• The flash lamp indicates the status of the flash when you press
the shutter-release button halfway.
- On: The flash will fire when you press the shutter-release button
all the way down.
- Flashing: The flash is charging. The camera cannot take images.
- Off: The flash will not fire when an image is taken.
• If the battery is low, the monitor will turn off in order to save
power while the flash is charging.
C Effective Range of the Flash
When ISO sensitivity is set to Auto, the flash has a range of 0.5 to 4.0 m (1 ft 8 in. to 13 ft) at the
maximum wide-angle zoom position and a range of 1.0 to 2.0 m (3 ft 4 in. to 6 ft 6 in.) at the
maximum telephoto zoom position.
57
Available Flash Modes
Auto
U
V
W
The flash fires automatically when lighting is dim.
Auto with red-eye reduction
Off
The flash will not fire.
We recommend using a tripod to stabilize the camera when shooting in dark
surroundings.
Fill flash
X
The flash fires whenever an image is taken. Use to “fill-in” (illuminate) shadows and backlit
subjects.
Slow sync
Y
Auto flash mode is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
The flash illuminates main subject; slow shutter speeds are used to capture background
at night or under dim lighting.
C The Flash Mode Setting
• The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the
camera is turned off.
58
C Red-eye Reduction
This camera uses Advanced Red-Eye Reduction (In-Camera Red-Eye Fix).
If the camera detects red eye while saving an image, the affected area will be processed to reduce
red-eye before the image is saved.
Note the following when shooting:
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in all situations.
• In some cases, red-eye correction may be applied to areas of an image unnecessarily. In these
cases, select another flash mode and take the image again.
59
Using the Self-timer
The camera is equipped with a self-timer that releases the shutter ten seconds or two
seconds after you press the shutter-release button. The self-timer is useful when you want to
be in the image you are taking, and when you want to avoid the effects of camera shake that
occur when you press the shutter-release button. When using the self-timer, use of a tripod is
tripod to stabilize the camera during shooting.
1
2
Press the multi selector J (n self-timer).
Press H or I to select n 10s or n 2s and
press the k button.
Self-timer
•
n 10s (ten seconds): Use on important occasions, such as
weddings.
•
•
n 2s (two seconds): Use to prevent camera shake.
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
When the shooting mode is the Pet portrait scene mode,
•
cannot be used.
3
Frame the image and press the
shutter-release button halfway.
10
•
Focus and exposure will be set.
1/250
F3.5
60
4
Press the shutter-release button the
rest of the way down.
9
•
The self-timer starts, and the number of seconds
remaining before the shutter is released is
displayed in the monitor. The self-timer lamp
flashes while the timer is counting down. About
one second before the shutter is released, the lamp
stops flashing and glows steadily.
1/250
F3.5
•
•
When the shutter is released, the self-timer will
be set to OFF.
To stop the timer before an image is taken, press
the shutter-release button again.
C Camera Settings That Cannot Be Used Simultaneously
61
Using Macro Mode
When using macro mode, the camera can focus on objects as close as approximately 5 cm
(2 in.) from the front of the lens.
This feature is useful when taking close-up images of flowers and other small subjects.
1
2
Press the multi selector I (p macro mode).
Press H or I to select ON and press the k
button.
Macro mode
•
The macro mode icon (F) is displayed.
•
If a setting is not applied by pressing the k button within
a few seconds, the selection will be canceled.
3
Use the zoom control to set the zoom ratio to
a position where F and the zoom indicator
glow green.
•
How close you can be to the subject when shooting depends on the zoom ratio.
When the zoom ratio is set to a position where F and the zoom indicator glow green, the
camera can focus on subjects as close as approximately 10 cm (4 in.) from the lens. When
the zoom is at the maximum wide-angle position, (at the position where G is displayed),
the camera can focus on subjects as close as approximately 5 cm (2 in.) from the lens.
62
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C Autofocus
When using macro mode in the A (auto) mode, you can focus without pressing the shutter-release
When using other shooting modes, Full-time AF is turned on automatically when macro mode is
turned on (except when using the Pet portrait scene mode).
You may hear the sound of the camera focusing.
C The Macro Mode Setting
for more information.
• The macro mode setting applied in A (auto) mode is saved in the camera’s memory even after
the camera is turned off, and reapplied the next time A (auto) mode is selected.
63
Adjusting Brightness (Exposure Compensation)
You can adjust overall image brightness.
1
2
Press the multi selector K (o exposure
compensation).
Press H or I to select a compensation value.
Exposure compensation
•
To make the image brighter, apply positive (+) exposure
compensation.
+
+
2.0
0.3
•
To make the image darker, apply negative (–) exposure
compensation.
-
2.0
3
Press the k button to apply the
compensation value.
•
If you do not press the k button within a few seconds, the
setting is applied and the menu disappears.
•
When an exposure compensation value other than 0.0 is
applied, the value is displayed with the H indicator in the
monitor.
25
m
0s
+0.3
890
4
Press the shutter-release button to take an image.
•
To turn off exposure compensation, return to step 1 and revert the value to 0.0.
C Exposure Compensation Value
The exposure compensation value applied in A (auto) mode is saved in the camera’s memory even
after the camera is turned off.
64
Default Settings
Default settings for each shooting mode are described below.
Exposure
compensation
Flash
Self-timer
Macro
A (auto)
U
Off
Off
Off2
Off
0.0
0.0
0.0
D (special effects)
F (smart portrait)
Scene
W
U1
Off
Off3
U4
V
W3
Off5
Off3
Off3
Off3
Off3
Off3
Off3
Off3
Off3
Off3
Off3
On3
On3
Off
Off
Off
Off
Off3
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off3
Off
Off
Off3
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.03
0.0
0.0
0.0
W3
V6
V7
U
U
W3
W3
W3
W
W3
W3
W3
W
X/W8
W3
Off3
Off
Off3
Off3
65
Exposure
compensation
(A64)
Flash
(A57)
Self-timer
(A60)
Macro
(A62)
W3
W3
Y9
Off3
Off
Off
0.0
0.0
1
Cannot be used when Blink proof is set to On or when Smile timer is set to On (continuous)
or On (BSS).
Can be set when Smile timer is set to Off.
The setting cannot be changed.
The camera automatically selects the flash mode appropriate for the scene it has selected. W (off)
can be selected manually.
Cannot be changed. The camera enters macro mode when i is selected.
The setting cannot be changed. The flash mode setting is fixed at fill flash with red-eye reduction.
Slow sync with red-eye reduction flash mode may be used.
Flash is fixed at X (fill flash) when HDR is set to Off, and is fixed at W (off) when HDR is set to On.
2
3
4
5
6
7
8
9
B Camera Settings That Cannot Be Used Simultaneously
66
Features That Can Be Set with the
d
Button (Shooting Menu)
The settings listed below can be changed by pressing the d button during shooting
Image mode
White balance
Continuous
ISO sensitivity
25
m
0s
Color options
AF area mode
Autofocus mode
890
The settings that can be changed vary depending on the shooting mode, as shown below.
Special
effects
Smart
portrait
Auto mode
Scene2
Image mode1
White balance
Continuous
w
w
w
w
w
w
w
w
–
w
–
w
–
w
–
–
–
–
ISO sensitivity
Color options
AF area mode
Autofocus mode
Quick effects
Skin softening
Smile timer
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
w
w
w
–
–
–
Blink proof
–
–
–
1
2
The setting is also applied to other shooting modes.
Additional settings are available for some scene modes. See “Characteristics of Each Scene”
67
Options Available in the Shooting Menu
Option
Description
A
Allows you to select the combination of image size and image
quality used when saving images.
Image mode
The default setting is P 4608×3456.
Allows you to adjust white balance to suit the light source in order
to make the colors in images match what you see with your eye.
The available settings are Auto (default setting), Preset manual,
Daylight, Incandescent, Fluorescent, Cloudy, and Flash.
White balance
Continuous
Allows you to capture a series of images. The available settings are
Single (default setting), Continuous H, Continuous L, Pre-
shooting cache, Continuous H: 120 fps, Continuous H:
60 fps, BSS, and Multi-shot 16.
Allows you to control the camera’s sensitivity to light.
You can set sensitivity to Auto (default setting) or Fixed range
auto, or lock the setting at 125, 200, 400, 800, 1600, or 3200.
When ISO sensitivity is set to Auto, the camera sets the ISO
sensitivity automatically, and E is displayed while shooting
when ISO sensitivity increases. When Fixed range auto is
selected, an ISO sensitivity range of either ISO 125-400 or ISO
125-800 can be selected.
ISO sensitivity
Allows you to change the color tones of images at the time of
shooting. The available settings are Standard color (default
setting), Vivid color, Black-and-white, Sepia, and Cyanotype.
Color options
AF area mode
Allows you to determine how the camera selects the focus area
that is used for autofocus; the available settings are Face priority,
Manual, Center, Subject tracking, and Target finding AF
(default setting).
68
Option
Description
A
Allows you to select how the camera focuses.
•
When Single AF (default setting) is selected, focus is locked
when the shutter button is pressed halfway.
Autofocus mode
•
When Full-time AF is selected, the camera focuses even when
the shutter-release button is not pressed halfway. The sound of
lens drive movement will be heard while the camera focuses.
The default setting is On.
Quick effects
Allows you select the degree of the skin softening effect. When a
setting other than Off is selected, the camera softens skin tones of
human faces and then saves the images. The default setting is
Normal.
Skin softening
When a setting other than Off is selected, the camera detects
human faces and then automatically releases the shutter
whenever a smile is detected. Self-timer cannot be used with this
feature.
•
When On (single) is selected, a single image is taken whenever
a smile is detected.
When On (continuous) or On (BSS) (default setting) is
selected, images are taken continuously whenever a smile is
detected. The flash cannot be used. If Blink proof is set to On,
the smile timer setting changes to On (single).
Smile timer
Blink proof
•
When On is selected, the camera automatically releases the
shutter twice each time an image is taken. Of the two shots, one in
which the subject’s eyes are open is saved. The flash cannot be
used.
The default setting is Off.
C Camera Settings That Cannot Be Used Simultaneously
69
Features That Cannot Be Used Simultaneously
Some functions cannot be used with other menu options.
Restricted function
Option
Description
When a setting other than Single is selected,
the flash cannot be used.
When Blink proof is set to On, the flash
cannot be used.
Flash mode
When On (continuous) or On (BSS) is
selected, the flash cannot be used.
When Smile timer is used for shooting, the
self-timer cannot be used.
Self-timer
When Subject tracking is selected, the self-
timer cannot be used.
When Subject tracking is selected, macro
mode cannot be used.
Macro mode
Image mode is set as follows depending on
the continuous shooting setting:
•
•
•
Continuous H: 120 fps: O (image size:
640 × 480 pixels)
Continuous H: 60 fps: M (image size:
1280 × 960 pixels)
Multi-shot 16: L (image size: 2560 × 1920
pixels)
Image mode
When using Black-and-white, Sepia, or
Cyanotype, the White balance setting is
fixed at Auto.
White balance
Continuous
If the self-timer is used when Continuous is
set to Pre-shooting cache, the Continuous
setting changes to Single.
70
Restricted function
ISO sensitivity
Option
Description
When Pre-shooting cache, Continuous H:
120 fps, Continuous H: 60 fps, or Multi-
shot 16 is selected, the ISO sensitivity
setting is automatically specified according to
the brightness.
When a setting other than Auto is selected for
White balance in Target finding AF mode,
the camera does not detect the main subject.
AF area mode
Quick effects
Smile timer
Quick effects cannot be applied to images
immediately after they are taken with
continuous shooting.
When the smile timer setting is set to On
(continuous) or On (BSS), it changes to On
(single) if Blink proof is set to On.
When Blink proof is set to On, it changes to
Off if Smile timer is set to On (continuous)
or On (BSS).
Blink proof
When Quick effects is set to On, Image
review is fixed at On.
Monitor settings
Print date
When Pre-shooting cache, Continuous H:
120 fps, Continuous H: 60 fps is selected,
date and time cannot be imprinted on images.
71
Restricted function
Motion detection
Option
Description
When a setting other than Single is selected,
Motion detection is disabled.
When the ISO sensitivity is set to any setting
other than Auto, Motion detection is
disabled.
When Subject tracking is selected, Motion
detection is disabled.
When On (continuous) or On (BSS) is
selected, Motion detection is disabled.
When a setting other than Single is selected,
Blink warning is disabled.
Blink warning
Digital zoom
Shutter sound
When Multi-shot 16 is selected, digital zoom
cannot be used.
When Subject tracking is selected, digital
zoom cannot be used.
When a setting other than Single is selected,
the shutter sound is disabled.
B Notes About Digital Zoom
• Depending on the shooting mode or the current settings, digital zoom may not be available
• When digital zoom is in effect, the camera focuses in the center of the frame.
72
Focusing
This camera uses autofocus to focus automatically when shooting. The focus area varies
depending on the shooting mode. Here, we will explain how to use focus areas and focus
lock.
Using Face Detection
In the following shooting modes, the camera uses face
detection to automatically focus on human faces. If the camera
detects more than one face, a double border is displayed
around the face that the camera will focus on, and single
borders are displayed around the other faces.
25
m
0s
890
Number of faces that
can be detected
Shooting mode
Focus area (double border)
Face priority.
Up to 12 The face closest to the camera
Pet portrait scene mode (when
Pet portrait auto release is
Up to 121 The face closest to the camera2
The face closest to the center of
the frame
Up to 3
1
2
If the camera detects both people and pets in the same shot, the camera can detect up to 12
faces.
If the camera detects a human face and a pet face in the same shot, it focuses on the pet’s face.
73
•
•
If the shutter button is pressed halfway when no faces are detected:
-
-
-
-
In A (auto) mode, the camera selects one or more of the nine focus areas containing
the subject closest to the camera.
When Scene auto selector is selected, the focus area changes depending on which
scene the camera selects.
In Portrait and Night portrait scene modes or in smart portrait mode, the camera will
focus on the area in the center of the frame.
In Pet portrait scene mode, the camera focuses on a pet face if one is detected. If no
pet faces are detected, the camera focuses on the area in the center of the frame.
You may hear the sound of the camera focusing.
B Notes About Face Detection
• The camera’s ability to detect faces depends on a variety of factors, including the direction in
which the faces are looking. Additionally, the camera may be unable to detect faces in the
following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
faces are looking.
subject may not be in focus even though the double border turns green. If the camera does not
74
Using Target Finding AF
focuses in the manner described below when you press the shutter-release button halfway.
•
If the camera detects the main subject, it focuses on that
subject. When the subject is in focus, the focus areas (up to
three areas) that match up with the size of the subject light
in green.
When human faces are detected, the camera automatically
sets focus priority on one of them.
1/250
F3.5
Focus areas
•
If the camera does not detect the main subject, it
automatically selects one or more of the nine focus areas
containing the subject closest to the camera. When the
subject is in focus, the focus areas that are in focus (up to
nine areas) light in green.
1/250
F3.5
Focus areas
B Notes About Target Finding AF
• Depending on shooting conditions, the subject that the camera determines to be the main
subject may vary.
• When White balance is set to any setting other than Auto, the camera does not detect the main
subject.
• The camera may not detect the main subject appropriately in the following situations:
- When the image shown in the monitor is very dark or bright
- When the main subject lacks clearly defined colors
- When the shot is framed so that the main subject is at the edge of the monitor
- When the main subject is composed of a repeating pattern
75
Subjects Not Suitable for Autofocus
The camera may not focus as expected in the following situations. In some rare cases, the
subject may not be in focus despite the fact that the focus area or the focus indicator glows
green:
•
•
Subject is very dark
Objects of sharply differing brightness are included in the scene (e.g. the sun behind the
subject makes that subject appear very dark)
•
No contrast between the subject and surroundings (e.g. a portrait subject wearing a white
shirt is standing in front of a white wall)
•
•
Several objects are at different distances from the camera (e.g. the subject is inside a cage)
Subjects with repeating patterns (window blinds, buildings with multiple rows of similarly
shaped windows, etc.)
•
Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus
several times, or focus on another subject positioned at the same distance from the camera as
76
Focus Lock
You can use focus lock to focus on off-center subjects when center is selected for AF area
mode.
The following procedure describes how to use focus lock when using A (auto) mode with
1
2
Position the subject in the center of the frame.
Press the shutter-release button
halfway.
•
Confirm that the focus area glows green.
•
Focus and exposure are locked.
1/250
F3.5
3
Continue holding down the shutter-release
button halfway and recompose the image.
•
Be sure to maintain the same distance between the
camera and the subject while the shutter-release button is
pressed halfway.
1/250
F3.5
4
Press the shutter-release button the rest of
the way down to take the image.
77
78
Playback Features
This chapter describes how to select certain types of images for playback as well as some of
the features available when playing back images.
............................................................................................ 86
Installing ViewNX 2......................................................................................................... 88
Transferring Images to the Computer ..................................................................... 91
Viewing Images................................................................................................................ 93
79
Playback Zoom
center of the image displayed in the monitor.
Displayed area guide
g
(i)
15
/
05 2013 15:30
/
0004. JPG
f
(h)
4
/
4
3.0
Image is displayed full-frame.
Image is zoomed in.
•
You can change the zoom ratio by rotating the zoom control to f (h) or g (i). Images
can be zoomed up to 10×.
•
•
To view a different area of the image, press the multi selector H, I, J, or K.
shooting (except when viewing an image captured in a series). If the camera detected
multiple faces when the image was captured, press H, I, J, or K to display a different
face. To zoom in on an area of the image where there are no faces, adjust the
magnification rate and then press H, I, J, or K.
•
•
You can crop the image and save the displayed area of the image as a separate file by
Press the k button to return to full-frame playback mode.
80
Thumbnail Display, Calendar Display
thumbnails.
f
(h)
f
(h)
1
/
20
15
/
05 2013 15:30
/
2013 05
0004. JPG
Su
M
Tu
W
Th
F
Sa
1
2
3
4
5
6
7
8
9
10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
4
g
g
1
/
20
(i)
(i)
Full-frame Display
Image Thumbnail Display
Calendar Display
(4, 9, and 16 images per screen)
•
•
You can view several images on one screen, making it easy to find the image you want.
You can change the number of thumbnails displayed by rotating the zoom control to
f (h) or g (i).
•
•
•
Press the multi selector H, I, J, or K to select an image and then press the k button to
display that image full-frame.
When 16 thumbnails are displayed, rotate the zoom control to f (h) to switch to
calendar display (except when in list by date mode).
While using calendar display mode, press the multi selector H, I, J, or K to select a date
and then press the k button to display the first image captured on that day.
B Calendar Display
Images captured when the camera’s date is not set are treated as images captured on January 1,
2013.
81
Selecting Certain Types of Images for Playback
You can change the playback mode according to the type of images you want to view.
Available Playback Modes
G
Play
All images are played back. When you switch from shooting mode to playback mode, this
mode is selected.
h
Favorite pictures
Play back images added to an album. You must add images to an album before you can
F
C
Auto sort
Images are automatically sorted into categories, such as portraits, landscapes, and movies.
List by date
Images captured on the selected date are played back.
82
Switching Between Playback Modes
1
When viewing images in full-frame playback
mode or thumbnail playback mode, press the
c button.
•
The playback mode selection menu is displayed, from
which you can select one of the available playback modes.
2
Press the multi selector H or I to select the
desired mode and press the k button.
Auto sort
•
If you select G Play, the playback screen is displayed.
•
When an option other than G Play is selected, the album,
category, or shooting date selection screen is displayed.
•
To return to the current playback mode without switching
playback modes, press the c button.
3
Select an album, category, or shooting date, and press the k button.
•
•
•
•
Repeat from step 1 to select a different album, category, or shooting date.
83
Features That Can Be Set with the
d
Button (Playback Menu)
When viewing images in full-frame playback mode or thumbnail playback mode, you can
When using favorite pictures (h), auto sort (F), or list by date (C) mode, the menu for the
current playback mode is displayed.
Option
Description
A
Allows you to create retouched copies in which contrast and
saturation have been enhanced.
Quick retouch1,2
Allows you to create copies with enhanced brightness and
contrast, brightening dark portions of an image.
D-Lighting1,2
Detects faces in images and retouches detected faces using
eight effects. The effect levels can be adjusted.
Glamour retouch1,2
When using a printer to print images saved on the memory
card, you can use the Print order function to select which
images are printed, and how many copies of each image are
printed.
Print order3,4
Allows you to view images saved in the internal memory or on a
memory card in an automatic slide show.
Slide show3
Protect3
Protects selected images from accidental deletion.
Specifies the orientation in which saved images are displayed
during playback.
Rotate image2,4
Creates a small copy of images suitable for use as e-mail
attachments.
Small picture1,2
Voice memo2
Copy5
Allows you to use the camera’s microphone to record voice
delete voice memos.
Allows you to copy images between the internal memory and a
memory card.
84
Option
Description
A
Allows you to select whether to display only the key picture for a
sequence of images captured continuously or to display the
sequence as individual images.
Sequence display
options
Allows you to change the key picture for images captured in
When making this setting, first select an image from the
Choose key picture
sequence you want to change before pressing the d button.
Allows you to add images to an album.
This option is not displayed in favorite pictures mode.
Favorite pictures
Remove from
favorites
Allows you to remove images from an album.
This option is displayed only in favorite pictures mode.
1
edited, and the same editing feature cannot be applied multiple times.
This function is not available when only the key pictures are displayed for sequences of images. To
use this function, press the k button to display the images in a sequence individually.
the same function to all images captured on the selected date.
This function is not displayed when using favorite pictures mode, auto sort mode, or list by date
mode.
2
3
4
5
85
Connecting the Camera to a TV, Computer, or Printer
You can enhance your enjoyment of images and movies by connecting the camera to a TV,
computer, or printer.
•
Before connecting the camera to an external device, make sure the remaining battery level
is sufficient and turn the camera off. For information about the connection methods and
subsequent operations, refer to the documentation included with the device in addition to
this document.
How to open the connector cover.
USB/audio/video output
connector
HDMI micro connector (Type D)
Insert the plug
straight.
86
Viewing images on a TV
Images and movies captured with the camera can be viewed on a TV.
Connection method: Connect the video and audio plugs of the included
audio video cable to the TV’s input jacks. Alternatively, connect a commercially
available HDMI cable (Type D) to the TV’s HDMI input jack.
Viewing and organizing images on a computer
If you transfer images to a computer, you can perform simple retouching and
manage image data in addition to playing back images and movies.
Connection method: Connect the camera to the computer’s USB port with
the included USB cable.
•
Before connecting to a computer, install ViewNX 2 on the computer using
the included ViewNX 2 CD-ROM. For information about using the
If any USB devices that draw the power from the computer are connected,
disconnect them from the computer before you connect the camera to it.
Connecting the camera and other USB-powered devices to the same
computer simultaneously may cause a camera malfunction or excessive
power supply from the computer, which could damage the camera or
memory card.
•
Printing images without using a computer
If you connect the camera to a PictBridge-compatible printer, you can print
images without using a computer.
Connection method: Connect the camera directly to the printer’s USB port
with the included USB cable.
87
Using ViewNX 2
ViewNX 2 is an all-in-one software package which enables you to transfer, view, edit and share
images. Install ViewNX 2 using the included ViewNX 2 CD-ROM.
ViewNX 2™
Your Imaging Toolbox
Installing ViewNX 2
•
An Internet connection is required.
Compatible Operating Systems
Windows
Windows 8, Windows 7, Windows Vista, Windows XP
Macintosh
Mac OS X10.6, 10.7, 10.8
Refer to the Nikon website for details on system requirements, including the latest
information on operating system compatibility.
88
1
2
Start the computer and insert the ViewNX 2 CD-ROM into the CD-ROM
drive.
•
Windows: If instructions for operating the CD-ROM are displayed in the window, follow the
instructions to proceed to the installation window.
•
Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon.
Select a language in the language selection dialog to open the
installation window.
•
If the desired language is not available, click Region Selection to choose a different region
and then choose the desired language (the Region Selection button is not available in the
European release).
•
Click Next to display the installation window.
3
Start the installer.
•
We recommend clicking Installation Guide in the installation window to check the
installation help information and system requirements before installing ViewNX 2.
•
Click Typical Installation (Recommended) in the installation window.
4
Download the software.
•
When the Software Download screen is displayed, click I agree - Begin download.
•
Follow the on-screen instructions to install the software.
89
5
6
Exit the installer when the installation completion screen is displayed.
•
Windows: Click Yes.
•
Mac OS: Click OK.
The following software is installed:
•
ViewNX 2 (consisting of the three modules below)
-
-
-
Nikon Transfer 2: For transferring images to the computer
ViewNX 2: For viewing, editing, and printing transferred images
Nikon Movie Editor: For basic editing of transferred movies
•
Panorama Maker (for creating a single panorama image of a landscape, etc. from a series of
images that each capture a separate portion of the subject)
Remove the ViewNX 2 CD-ROM from the CD-ROM drive.
90
Transferring Images to the Computer
1
Choose how images will be copied to the computer.
Choose one of the following methods:
•
Direct USB connection: Turn the camera off and ensure that the memory card is inserted
in the camera. Connect the camera to the computer using the included USB cable. The
camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove the memory card
from the camera before connecting it to the computer.
•
•
SD card slot: If your computer is equipped with an SD card slot, the card can be inserted
directly in the slot.
SD card reader: Connect a card reader (available separately from third-party suppliers) to
the computer and insert the memory card.
91
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
•
When using Windows 7
If the dialog shown at right is displayed,
follow the steps below to select
Nikon Transfer 2.
1 Under Import pictures and videos, click
Change program. A program selection
dialog will be displayed; select Import
File using Nikon Transfer 2 and click
OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a while for Nikon Transfer 2
to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.
2
Transfer images to the computer.
•
Confirm that the name of the connected camera or removable disk is displayed as the
“Source” on the “Options” title bar of Nikon Transfer 2 (1).
Click Start Transfer (2).
•
1
2
•
At default settings, all the images on the memory card will be copied to the computer.
92
3
Terminate the connection.
•
If the camera is connected to the computer, turn the camera off and disconnect the USB
cable. If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the memory card
and then remove the card from the card reader or card slot.
Viewing Images
Start ViewNX 2.
•
Images are displayed in ViewNX 2 when transfer
is complete.
•
Consult online help for more information on
using ViewNX 2.
C Starting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut on the desktop.
• Mac OS: Click the ViewNX 2 icon in the Dock.
93
94
Recording Movies
You can record movies by simply pressing the b (e movie-record) button.
Movie option
1
Display the shooting screen.
•
The icon for the selected movie option is displayed. The
25
m
0s
890
Movie recording time
remaining
2
Press the b (e movie-record) button to start
movie recording.
•
The camera focuses on the subject in the center of the frame.
Focus areas are not displayed during recording.
•
When an option with 16:9 aspect ratio, such as
d 1080P/30p, is selected for Movie options, the
monitor display changes to an aspect ratio of 16:9 with
movie recording (the area indicated on the right is
recorded).
•
•
C is displayed while saving to the internal memory.
Press the multi selector K to pause recording (except when
p iFrame 540/30p is selected in Movie options or
14
m30s
•
Recording automatically stops about five minutes after recording is paused or when the
maximum movie length has been recorded.
3
Press the b (e movie-record) button again to end recording.
96
B Notes About Recording Images and Saving Movies
The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being recorded or while a movie is being saved. Do not open
the battery-chamber/memory card slot cover or remove the battery or memory card while an
indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
B Notes About Movie Recording
• Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording
Class rating are used.
• Optical zoom cannot be adjusted once movie recording begins.
• Rotate the zoom control during recording to enable digital zoom. Subjects can be magnified up to
4× the optical zoom ratio applied before movie recording began.
• There is some degradation in image quality when digital zoom is used. When recording ends,
digital zoom turns off.
• The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration
reduction, and aperture operation when brightness changes may be recorded.
• The following phenomena may be seen in the monitor while recording movies. These
phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting.
- Subjects that move quickly from one side of the frame to the other, such as a moving train or car,
may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is moved.
• Depending on the distance to the subject or the amount of zoom applied, subjects with repeating
patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.)
in them during movie recording and playback. This occurs when the pattern in the subject and the
layout of the image sensor interfere with each other; it is not a malfunction.
97
B Camera Temperature
• The camera may become warm when shooting movies for an extended period of time or when
the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when
recording movies, the camera will automatically stop recording
10
s
after ten seconds.
The amount of time remaining until the camera stops recording
(B10s) is displayed.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
14
m30s
B Notes About Autofocus
1. Set Autofocus mode in the movie menu to Single AF (default setting) before starting movie
recording.
2. Frame another subject—positioned at the same distance from the camera as the intended
subject—in the center of the frame, press the b (e movie-record) button to start recording, and
then modify the composition.
C Functions Available for Movie Recording
• The exposure compensation, white balance, and color options settings for the current shooting
subjects close to the camera can be recorded. Confirm settings before starting movie recording.
self-timer is enabled, the camera focuses on the subject in the center of the frame and starts movie
recording after the specified two or ten seconds.
• The flash will not fire.
• Press the d button to select the D (movie) menu icon and adjust movie menu settings before
info, the area that will be visible in the movie can be confirmed before movie recording starts.
98
Features That Can Be Set with the d Button (Movie Menu)
Enter shooting mode M d button M D menu icon M k button
The settings of the menu options listed below can be
configured.
Movie options
Open with HS footage
Autofocus mode
Wind noise reduction
Option
Description
A
Select the movie type.
Select normal speed to record movies at normal speed, or HS
(high speed) to record movies that will be played in slow or
fast motion.
Movie options
When you select an HS movie option in Movie options, choose
from On (default setting) or Off to determine whether or not the
camera records HS movies when movie recording starts.
Open with HS footage
•
movie when recording starts.
•
Press the k button to switch back and forth between HS
movie recording and normal speed movie recording.
When Single AF (default setting) is selected, focus is locked
when movie recording begins. When Full-time AF is
selected, the camera focuses continuously while recording.
When Full-time AF is selected, the sound of the camera
focusing may be heard in recorded movies. If you want to
prevent the sound of the camera focusing from being
recorded, select Single AF.
Autofocus mode
•
When an HS movie option is selected in Movie options,
the setting is fixed at Single AF.
Set whether or not to reduce wind noise during movie recording.
Wind noise reduction
•
When an HS movie option is selected in Movie options,
the setting is fixed at Off.
99
Functions Available During Playback
Paused
Playback controls are displayed at the top of the monitor.
Press the multi selector J or K to select a control. The
operations described below are available.
Function Icon
Description
Rewind
A
B
Hold down the k button to rewind the movie.
Advance
Hold down the k button to advance the movie.
Press the k button to pause playback. The following operations can be
performed while playback is paused using the controls displayed at the top
in the monitor.
Press the k button to rewind the movie one frame. Hold down the
k button for continuous rewinding.
C
Press the k button to advance the movie one frame. Hold down
the k button for continuous advancing.
Pause
E
D
F
I
Press the k button to resume playback.
Press the k button to display the movie edit screen, which allows
you to cut out unwanted portions of a movie and save the desired
portion.
End
G
Press the k button to return to full-frame playback mode.
Adjusting volume
4s
Volume indicator
B Notes About Playing Back Movies
The COOLPIX S5200 is not able to play back movies recorded with another make or model of digital
camera.
101
102
Features That Can Be Set with the
d
Button (Setup Menu)
Press the d button M z (setup) menu icon M k button
The settings of the menu options listed below can be
configured.
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
AF assist
Option
Welcome screen
Time zone and date
Monitor settings
Print date
Description
A
Allows you to select whether or not the welcome screen is
displayed when the camera is turned on.
Allows you to set the camera clock.
Allows you to adjust photo information display, post-shooting
image review, and monitor brightness settings.
Allows you to select the vibration reduction setting used
when shooting.
Vibration reduction
Allows you to set whether or not the camera automatically
increases the shutter speed to reduce blurring caused by
camera shake if motion is detected when shooting still
Motion detection
images.
AF assist
Allows you to enable or disable the AF-assist illuminator.
Allows you to enable and disable digital zoom.
Allows you to adjust sound settings.
Digital zoom
Sound settings
Allows you to set the amount of time that passes before the
monitor turns off to save power.
Auto off
104
Option
Description
A
Format memory/
Format card
Allows you to format the internal memory or the memory
card.
Language
TV settings
Allows you to change the camera’s display language.
Allows you to adjust TV-connection settings.
When set to Auto (default setting), you can charge the
camera’s battery by connecting the camera to a computer
(provided that the computer is able to supply power).
Charge by computer
•
When charging by computer, it may take more time to
charge the battery than when using the Charging AC
Adapter EH-70P.
Allows you to set whether or not closed eyes are detected
when taking images of people using face detection.
Blink warning
Wi-Fi options
Allows you to configure the Wi-Fi (wireless LAN) settings to
connect the camera and a smart device.
information.
Allows you to set whether or not to enable the function for
Eye-Fi upload
Eye-Fi card.
Allows you to reset the camera’s settings to their default
values.
Reset all
Firmware version
View the current camera firmware version.
105
106
Using the Wi-Fi (Wireless
LAN) Feature
Functions that Can Be Performed Using Wi-Fi
You can perform the following functions if you install the dedicated software “Wireless Mobile
Utility” on your smart device that runs on Android OS or iOS, and connect it to the camera.
Take Photos
You can display the shooting screen of the camera on your smart device and operate the
camera by remote control.*
The pictures shot by remote control can be copied to your smart device.
*
Operations other than turning on and off the camera cannot be performed during remote control
operation.
View Photos
You can copy the pictures saved in the camera’s memory card to your smart device.
107
Installing the Software on the Smart Device
1
2
Use your smart device to connect to Google Play Store, App Store or
other online apps marketplace and search for “Wireless Mobile Utility.”
•
Check the user’s manual provided with your smart device for further details.
Check the description and other information and install the software.
•
For more information about how to operate the software, download the user’s manual from
the website below.
-
-
Android OS: http://nikonimglib.com/ManDL/WMAU/
iOS: http://nikonimglib.com/ManDL/WMAU-ios/
108
Connecting the Smart Device to the Camera
Press the d button M z menu icon M Wi-Fi options M k button
Wi-Fi options
Wi-Fi network
1
2
Press the multi selector to select the Wi-Fi
network and press the k button.
SSID
Auth. encryp.
/
Password
Channel
Current settings
Restore factory defaults
Select On and press the k button.
Wi-Fi network
On
Off
•
•
SSID and the password are displayed.
If no connection confirmation is received from the smart
device within 3 minutes, the setting returns to Off.
Wi-Fi network
SSID:
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXX
Password:
XXXXXXXXXXXXXXXXXX
Cancel
Back
109
3
4
Set the Wi-Fi setting on the smart device to On.
•
Check the user’s manual provided with your smart device for further details.
•
After the network name (SSID) that can be used for the smart device is displayed, select the
SSID displayed on the camera.
•
•
displayed on the camera.
When the camera is successfully connected to a Wi-Fi network, the shooting screen is
Start the dedicated software installed on the smart device.
•
•
The screen for selecting “Take photos” or “View photos” is displayed.
When the message “Cannot connect to camera.” is displayed, retry the Wi-Fi network
setting.
To Terminate the Wi-Fi Connection
• Turn off the camera.
• Set the Wi-Fi setting on the smart device to Off.
B Notes About Wi-Fi Connection
• Set the Wi-Fi network to Off in a place where the use of radio waves is prohibited.
• When a memory card is not inserted in the camera, the Wi-Fi feature cannot be used. When Eye-Fi
• When Wi-Fi is connected, Auto off is disabled.
• When the Wi-Fi network is set to On, the battery will drain faster than normal.
• The Wi-Fi network cannot be selected when the battery level indicator in the monitor indicates
B. In addition, if the battery level indicator indicates B while a Wi-Fi connection is established,
the connection is terminated.
C Notes About Security Settings
If the camera is installed with the Wi-Fi feature without proper security settings (encryption and
password), unauthorized third parties may access the network and cause harm. We strongly
recommend performing the required security settings before using the Wi-Fi feature.
110
E
Reference Section
The Reference Section provides detailed information and hints about using the camera.
Shooting
Playback
Favorite Pictures Mode............................................................................................. E6
Auto Sort Mode.........................................................................................................E10
List by Date Mode ....................................................................................................E12
Editing Still Images ..................................................................................................E16
Editing Movies...........................................................................................................E38
Menu
The Smart Portrait Menu........................................................................................E57
The Playback Menu..................................................................................................E60
The Movie Menu .......................................................................................................E74
The Setup Menu........................................................................................................E82
Additional Information
File and Folder Names ......................................................................................... E111
Optional Accessories............................................................................................ E113
Error Messages ....................................................................................................... E114
E1
Using Easy Panorama (Shooting and Playback)
Shooting with Easy Panorama
Enter shooting mode M A (shooting mode) button M x (second icon from the top*)
M K M H, I, J, K M p (easy panorama) M k button
*
The icon of the last scene selected is displayed.
1
Choose Normal (180°) or Wide (360°) as the
shooting range and press the button.
Easy panorama
k
•
-
-
-
When the camera is readied in the horizontal position, the
Normal (180°)
image size (width × height) is as follows.
Normal (180°): 4800 × 920 when moved horizontally,
1536 × 4800 when moved vertically
Wide (360°): 9600 × 920 when moved horizontally, 1536 ×
9600 when moved vertically
Wide (360°)
When the camera is readied in the vertical position, the direction and the width and height
are switched.
2
Frame the first edge of the panorama scene,
and then press the shutter-release button
halfway to focus.
•
The zoom position is fixed at the maximum wide-angle
position.
25
m
0s
•
•
•
•
A grid is displayed in the monitor.
890
The camera focuses on the area in the center of the frame.
E2
3
Press the shutter-release button all the way,
and then remove your finger from the
shutter-release button.
•
I is displayed to indicate the direction of camera
movement.
4
Move the camera slowly and straight in one of
the four directions, and begin shooting.
•
•
•
When the camera detects which direction it is moving in,
shooting begins.
A guide indicating the current shooting position is
displayed.
When the shooting position guide reaches the edge,
shooting ends.
Guide
Example of camera movement
•
•
The operator, without shifting position, moves the camera horizontally or vertically in an
arc so that the guide travels from one edge to the other.
Shooting stops if the guide does not reach the edge within about 15 seconds (when
Normal (180°) is selected) or within about 30 seconds (when Wide (360°) is selected)
after shooting starts.
E3
B Notes About Easy Panorama Shooting
• The range of the image seen in the saved image will be narrower than that seen in the monitor at
the time of shooting.
• If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or
darkness), an error may occur.
• If shooting is stopped before the camera reaches the half-way point in the panorama range, a
panorama image is not saved.
• If more than half of the panorama range is captured but shooting ends before reaching the edge
of the range, the range not captured is recorded and displayed in gray.
E4
Viewing Images Captured with Easy Panorama
15
/
05/2013 15:30
using easy panorama in full-frame playback mode, and then
press the k button to display the short edge of the image
using the entire monitor and automatically move (scroll) the
displayed area.
0004. JPG
•
The image scrolls in the direction that was used when
shooting.
4
/
4
Playback controls are displayed at the top of the monitor
during playback. Press the multi selector J or K to choose a
control, and then press the k button to perform the following
operations.
Function
Rewind
Icon
A
B
Description
Hold down the k button to scroll backward quickly.
Advance
Pause
End
Hold down the k button to scroll forward quickly.
The following operations can be performed while playback is
paused using the controls displayed at the top in the monitor.
C
D
F
Hold down the k button to rewind.
Hold down the k button to scroll.
Resume automatic scrolling.
E
G
Switch to full-frame playback mode.
B Notes About Easy Panorama Scroll Playback
The COOLPIX S5200 may not be able to scroll the playback of, or zoom in on, easy panorama images
captured with another make or model of digital camera.
E5
Favorite Pictures Mode
You can sort your images (except movies) into nine albums and add them as favorite pictures
(added images are not copied or moved). After you add images to albums, you can choose to
play back only the added images by using favorite pictures mode.
•
•
•
By creating albums for certain subjects or events, you can find your favorite images easily.
The same image can be added to multiple albums.
Up to 200 images can be added to each album.
Adding Images to Albums
Press the c button (playback mode) M d button M Favorite pictures M k button
•
Images cannot be added to albums in favorite pictures playback mode.
1
Press the multi selector J or K to choose an
image and press H to display L.
Favorite pictures
•
You can add L to multiple images. To remove L, press
I.
•
full-frame playback or f (h) to six-image thumbnail
display.
Back
•
Press the k button to display the album selection screen.
E6
2
Use the multi selector to select the desired
album and press the k button.
Favorite pictures
•
The selected images are added and the camera switches to
the playback menu.
•
To add the same image to multiple albums, repeat from
step 1.
Back
Add
Playing Back Images in Albums
Press the c button (playback mode) M c button M h Favorite pictures M k button
Use the multi selector to select an album and then press the
Favorite pictures
k button to play back the images that have been added to
the selected album.
•
The following operations are available from the album
selection screen.
-
-
l button: Deletes all images in the selected album.
Choose icon
•
When viewing images in full-frame playback mode or
thumbnail playback mode, press the d button to select a
B Notes About Deletion
If an image is deleted while using favorite pictures mode, the image will not only be removed from
the album, but the corresponding image file will also be permanently deleted from the internal
memory or the memory card.
E7
Removing Images from Albums
Enter h Favorite pictures mode M select the album containing the image you want to
remove M k button M d button M Remove from favorites M k button
1
2
Press the multi selector J or K to choose an
image and press H to hide L.
Remove from favorites
•
You can hide the L icons for multiple images. To display
the icons again, press I.
•
full-frame playback or f (h) to six-image thumbnail
display.
Back
•
Press the k button to display a removal confirmation
screen.
Select Yes and press the k button.
•
To cancel removal, select No.
E8
Changing the Favorites Album Icon
Press the c button (playback mode) M c button M h Favorite pictures M k button
1
2
Use the multi selector to select an album and press the d button.
Press J or K to select an icon color and press
Choose icon
the k button.
Back
3
Press H, I, J, or K to select an icon and
press the k button.
Choose icon
•
The icon changes and the monitor display returns to the
list of albums screen.
Back
B Notes About Album Icons
• Set the album icons separately for the internal memory and for the memory card.
• To change the album icons for the internal memory, first remove the memory card from the
camera.
• The default setting for the icon is the number icon (black).
E9
Auto Sort Mode
Images are automatically sorted into categories, such as portraits, landscapes, and movies.
Press the c button (playback mode) M c button M F Auto sort M k button
Use the multi selector to select a category and then press the
Portraits
k button to play back the images in the selected category.
•
The following operation is available while the category
selection screen is displayed.
-
l button: Deletes all images in the selected category.
•
When viewing images in full-frame playback mode or
thumbnail playback mode, press the d button to select a
Other scenes
Auto Sort Mode Categories
Option
Description
setting set to On (single), On (continuous), or On (BSS)
Z Smile
Images captured in Portrait*, Night portrait*, Party/indoor, or
D
Portraits
setting set to Off
u
Food
U
Landscape
Images captured in Night landscape*, Sunset, Dusk/dawn, or
V
Dusk to dawn
E10
Option
Close-ups
Pet portrait
Description
D
O
q Movie
X
Retouched copies
All other images that cannot be defined by the categories described
above
W Other scenes
*
categories.
B Notes About Auto Sort Mode
• Up to 999 images and movie files can be sorted into each category in auto sort mode. If 999
images or movies have already been sorted into a specific category, new images and movies
cannot be sorted into that category nor can they be displayed in auto sort mode. You can play
back images and movies that could not be sorted into a category by using normal playback mode
• Images and movies copied from the internal memory to a memory card, or vice versa, cannot be
• Images or movies saved by a camera other than the COOLPIX S5200 cannot be played back in
auto sort mode.
E11
List by Date Mode
Press the c button (playback mode) M c button M C List by date M k button
Use the multi selector to select a date and then press the k
List by date
button to play back the images captured on the selected date.
2 0/ 0 5/ 2 01 3
3
2
•
The first image that was captured on the selected date is
displayed.
1 5 / 0 5/ 2 01 3
1 0 / 0 5/ 2 01 3
0 5/ 0 5/ 2 01 3
•
The following operations are available while the shooting
date selection screen is displayed.
1
-
d button: You can select one of the following
all images captured on the selected date.
1 0
➝ print order, slide show, protect
-
l button: Deletes all images captured on the selected date.
•
•
When viewing images in full-frame playback mode or thumbnail playback mode, press the
B Notes About List by Date Mode
• Up to 29 dates can be selected. If images exist for more than 29 dates, all images saved earlier than
most recent 29 dates will be combined under Others.
• The 9,000 most recent images can be displayed in list by date mode.
• Images captured when the camera’s date is not set are treated as images captured on January 1,
2013.
E12
Viewing and Deleting Images Captured Continuously (Sequence)
Viewing Images in a Sequence
Each series of images captured using the following settings is saved in a sequence.
•
•
-
-
-
-
-
Continuous H
-
-
Sports
Continuous L
Pet portrait (when Continuous is selected)
Pre-shooting cache
Continuous H: 120 fps
Continuous H: 60 fps
•
-
When Smile timer is set to On
(continuous)
By default, only the first image of a sequence (key picture) is
displayed to represent the images in the sequence in full-
15
/
05 2013 15:30
/
0004. JPG
•
When only the key picture is displayed for a sequence, the
image cannot be zoomed in on.
1
/
5
When only the key picture is displayed for a sequence, press
the k button to display each image in a sequence
individually.
15
/
05 / 2013 15:30
•
•
•
To display the previous or next image, press the multi
selector J or K.
To return to key picture only display, press the multi selector
H.
Back
1
/
5
To display images in a sequence as thumbnails, set
Sequence display options to Individual pictures in the
E13
B Sequence Display Options
displayed using their key pictures or to display them as individual images.
• Images captured continuously with cameras other than the COOLPIX S5200 cannot be displayed
as a sequence.
C Changing Key Picture in Sequence
C Playback Menu Options Available When Using Sequence
When the d button is pressed, the following menu operations are available for the images in that
sequence.
•
•
•
•
•
•
•
•
•
•
•
•
•
1
This operation is not available when only a key picture is displayed. Display the images in the
sequence individually and then press the d button.
2
If the d button is pressed when only a key picture displayed, the same settings can be applied
to all images in that sequence. Press the d button after displaying individual images to apply
settings to each displayed image.
E14
Deleting Images in a Sequence
If Sequence display options
be deleted vary as described below. To display the screen for selecting the deletion method, press
the button.
If only key pictures are displayed for sequences when the l button is pressed:
l
•
-
-
-
Current image:
Erase selected images:
All images:
When a key picture is selected, all images in that sequence
are deleted.
When a key picture is selected in the erase selected images
All images are deleted, including the sequence represented
by the currently displayed key picture.
•
If the k button has been pressed and each individual image in the sequence is displayed
before pressing the l button:
Deletion methods change as follows.
-
-
Current image:
Erase selected images:
The image currently displayed is deleted.
When multiple images in the sequence are selected in the
are deleted.
-
Entire sequence:
All images in the sequence, including the image currently
displayed, are deleted.
E15
Editing Still Images
Editing Features
The editing functions described below are available.
Editing function
Description
Apply a variety of effects to images.
Easily create retouched copies in which contrast and saturation have
been enhanced.
Create a copy of the current image with enhanced brightness and
contrast, brightening dark portions of the image.
Detect faces in images and retouch detected faces using eight
effects. The effect levels can be adjusted.
Create a small copy of images suitable for use as e-mail attachments.
Crop a portion of the image. Use to zoom in on a subject or arrange
a composition.
B Notes About Image Editing
• The editing functions of COOLPIX S5200 cannot be used for images captured with another make
or model of digital camera.
• If no face is detected in an image, a copy cannot be created using the glamour retouch function
• Edited copies created with COOLPIX S5200 may not be displayed properly on another make or
model of digital camera. It may also be impossible to transfer them to a computer using another
make or model of digital camera.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
displayed, perform one of the procedures described below:
- Press the k button to display a sequence of images as individual images and select an image in
the sequence.
display them as individual images and select an image.
E16
C Restrictions on Image Editing
When an edited copy is further modified with another editing function, check the following
restrictions.
Editing function used
Editing functions to use
Quick effects
Quick retouch
D-Lighting
The glamour retouch, small picture, or crop function can be used.
The quick effects, quick retouch, D-Lighting, small picture, or crop
function can be used.
Glamour retouch
Small picture
Crop
Another editing function cannot be used.
• Copies created with editing functions cannot be further edited with the same function used to
create them.
• When combining the small picture or crop function and another editing function, use the small
picture and crop functions after other editing functions have been applied.
• Retouch effects such as the glamour retouch function’s skin softening effect can be applied to
C Original and Edited Images
• Copies created with editing functions are not deleted if the original images are deleted. The
original images are not deleted if copies created with editing functions are deleted.
• Edited copies are saved with the same shooting date and time as the original.
E17
Quick Effects
Select one of the 30 effects listed below. The effect results can be previewed on the screen
Effect
Pop and Super vivid
Description
Mainly enhances the color saturation.
Painting, High key, Toy camera effect 1,
Toy camera effect 2, Low key, Cross
process (red), Cross process (yellow),
Cross process (green), and Cross process
(blue)
Mainly adjusts hue and creates a different look
for the image.
Soft, Fisheye, Cross screen, and Miniature
effect
Processes images with a variety of effects.
Turns multicolor images into single color images.
Selective color transforms all colors, except a
specified color, to black and white.
High-contrast monochrome, Sepia,
Cyanotype, and Selective color (12 colors)
1
Display the image to which you want to apply
an effect in full-frame playback mode and
press the k button.
15
/
05 2013 15:30
/
0004. JPG
•
The effect selection screen is displayed.
4
/
4
2
Press the multi-selector J or K to select the
desired effect and press the k button.
Quick effects
Pop
Super vivid
Painting
•
full-frame playback or f (h) to six-image thumbnail
display.
High key
Toy camera Toy camera
effect 1 effect 2
•
To exit without saving the edited image, press the d
button. When a confirmation screen is displayed, select
Yes and press the k button.
Cancel
E18
Quick Retouch: Enhancing Contrast and Saturation
Press the c button (playback mode) M select an image M d button M
Quick retouch M k button
Press the multi selector H or I to select the
Quick retouch
amount of effect applied and press the k button.
•
The original version is displayed on the left and the edited
version is displayed on the right.
•
•
To exit without saving the copy, press J.
Copies created with the quick retouch function are indicated by
Normal
Amount
D-Lighting: Enhancing Brightness and Contrast
Press the c button (playback mode) M select an image M d button M
D-Lighting M k button
Use the multi selector to select OK and press the
D-Lighting
k button.
•
The original version is displayed on the left and the edited
version is displayed on the right.
•
•
To exit without saving the copy, press J.
Copies created with the D-Lighting function are indicated by the
OK
Cancel
E20
Glamour Retouch: Enhancing Human Faces with Eight Effects
Press the c button (playback mode) M select an image M d button M
Glamour retouch M k button
1
2
Press the multi selector H, I, J, or K to
select the face that you want to retouch and
press the k button.
Subject selection
•
When only one face is detected, proceed to step 2.
Back
Press the multi selector J or K to select the
effect, press H or I to select the effect level,
and press the k button.
Skin softening
3
2
1
•
You can simultaneously apply multiple effects from the list
below. Adjust the settings for all effects before pressing the
k button.
Back
B (skin softening), F (small face), A (big eyes), C
(brighten faces), E (hide eye bags), G (whiten eyes), H
(whiten teeth), D (redden cheeks)
•
Press the d button to return to the screen for selecting a face.
3
Preview the result and press the k button.
Preview
•
To change the settings, press J to return to step 2.
•
To exit without saving the edited image, press the d
button. When a confirmation screen is displayed, select Yes
and press the k button.
Save
E21
4
Select Yes and press the k button.
•
A new, edited copy is created.
Save OK?
•
Copies created with the glamour retouch function are
indicated by the u icon displayed during playback
Yes
No
B Notes About Glamour Retouch
• Only one human face per image can be edited using the glamour retouch function.
• Depending upon the direction in which faces are looking, or the brightness of faces, the camera
may be unable to accurately recognize faces, or the glamour retouch function may not perform as
expected.
• If no faces are detected in the image, a warning is displayed and the screen returns to the playback
menu.
• The glamour retouch function is available only for images captured when the ISO sensitivity is
1600 or lower.
Pre-shooting cache, Continuous H: 120 fps, Continuous H: 60 fps, or Multi-shot 16.
E22
Small Picture: Reducing the Size of an Image
Press the c button (playback mode) M select an image M d button M Small picture
M k button
1
2
Press the multi selector H or I to select the
desired copy size and press the k button.
Small picture
•
•
The available sizes are 640×480, 320×240 and 160×120.
Images taken at an image mode setting of l 4608×2592
are saved at 640×360 pixels. Proceed to step 2.
640
320
160
×480
×240
×120
Select Yes and press the k button.
•
A new, small copy is created (compression ratio of
approximately 1:16).
Create small picture file?
•
Copies created with the small picture function are
displayed at a smaller size with the C icon during
Yes
No
E23
Crop: Creating a Cropped Copy
Create a copy containing only the portion visible in the monitor when u is displayed with
1
2
Refine copy composition.
•
Rotate the zoom control to g (i) or f (h) to adjust the
zoom ratio.
•
Press the multi selector H, I, J, or K to scroll the image
so that only the portion to be copied is visible in the
monitor.
3.0
3
Press the d button.
4
Use the multi selector to select Yes and press
the k button.
Save this image as
displayed?
•
A cropped copy is created.
•
Copies created with the crop function are indicated by the
Yes
No
E24
C Image Size
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the image size of the cropped copy is 320 × 240 or 160 × 120, the image is displayed at a smaller
size during playback.
C Cropping the Image in Its Current “Tall” Orientation
orientation. After cropping the image, rotate the cropped image back to “tall” orientation. The image
displayed in “tall” orientation can be cropped by zooming in on the image until the black bars
displayed on the both sides of the monitor disappear. The cropped image is displayed in landscape
orientation.
E25
Connecting the Camera to a TV (Viewing Images on a TV)
Connect the camera to a TV to play back images or movies on the TV. If your TV is equipped
with an HDMI jack, a commercially available HDMI cable can be used to connect the camera
to the TV.
1
Turn off the camera.
2
Connect the camera to the TV.
When using the included audio/video cable
Connect the yellow plug to the video-in jack and the white and red plugs to the audio-in jacks
on the TV.
Yellow
White
Red
E26
When using a commercially available HDMI cable
Connect the plug to the HDMI jack on the TV.
HDMI micro connector (Type D)
to HDMI jack
3
Set the TV’s input to external video input.
•
See the documentation provided with your TV for details.
4
Hold down the c button to turn on the
camera.
•
The camera enters playback mode and images are
displayed on the TV.
•
While connected to the TV, the camera monitor will remain
off.
B Notes About Connecting the HDMI Cable
An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a
high-definition TV. The output terminal on this camera is an HDMI micro connector (type D). When
purchasing an HDMI cable, be sure that the device end of the cable is an HDMI micro connector.
B Notes About Connecting the Cable
When connecting the cable, be sure that the plug is properly oriented. Do not force the plug into
the camera. When disconnecting the cable, do not pull the plug at an angle.
E27
B If Images Are Not Displayed on the TV
conforms to the standard used by your TV.
C Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to control playback.
It can be used instead of the camera’s multi selector and zoom control to select images, start and
pause movie playback, switch between full-screen playback mode and four-image thumbnail
display, etc.
connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.
• Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.
E28
Connecting the Camera to a Printer (Direct Print)
and print images without using a computer.
Follow the procedures below to print images.
Take images
Select images for printing and
number of copies using
Print images one at a time
When printing is complete, turn the camera off and disconnect the USB cable
B Notes About Power Source
• When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
• If the AC Adapter EH-62G (available separately) is used, COOLPIX S5200 can be powered from an
electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to
heat up or malfunction.
E29
Connecting the Camera to a Printer
1
Turn off the camera.
2
3
Turn on the printer.
•
Check printer settings.
Connect the camera to the printer using the included USB cable.
•
Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do
not use force when connecting or disconnecting the plugs.
E30
4
The camera is automatically turned on.
•
When properly connected, the PictBridge startup screen
) will be displayed in the camera monitor, followed by
(
1
the Print selection screen ( ).
2
Print selection
15 05 2013
1
2
/
/
32
B If the PictBridge Startup Screen Is not Displayed
the camera’s setup menu to Off and reconnect the cable.
C Printing Images
Images saved on a memory card can be printed by transferring the images to a computer or
connecting the camera directly to a printer. The following printing methods are also available:
• Inserting a memory card into a DPOF-compatible printer’s card slot
• Taking a memory card to a digital photo lab
For printing using these methods, specify the images and the number of prints each to the memory
E31
Printing Individual Images
below to print an image.
1
2
3
Use the multi selector to select the desired
image and press the k button.
Print selection
15 05 2013
/
/
32
•
Rotate the zoom control to f (h) to display six
thumbnails, and g (i) to switch back to full-frame
playback.
Select Copies and press the k button.
PictBridge
1
prints
Start print
Copies
Paper size
Select the desired number of copies (up to
nine) and press the k button.
Copies
4
E32
PictBridge
4
5
6
7
Select Paper size and press the k button.
4
prints
Start print
Copies
Paper size
Paper size
Default
Select the desired paper size and press the k
button.
3.5×5 in.
5×7 in.
•
To specify paper size using settings on the printer, select
Default in the paper size option.
100×150 mm
4×6 in.
8×10 in.
PictBridge
Select Start print and press the k button.
4
prints
Start print
Copies
Paper size
Printing begins.
•
Monitor display returns to the print selection screen shown
in step 1 when printing is complete.
Printing
2
/
4
Cancel
Current number of copies/
total number of copies
E33
Printing Multiple Images
below to print multiple images.
1
2
When the Print selection screen is displayed,
press the d button.
Print menu
Print selection
Use the multi selector to select Paper size
and press the k button.
Print all images
DPOF printing
Paper size
•
To exit the print menu, press the d button.
Paper size
Default
3
Select the desired paper size and press the k
button.
3.5×5 in.
5×7 in.
•
To specify paper size using settings on the printer, select
Default in the paper size option.
100×150 mm
4×6 in.
8×10 in.
E34
Print menu
Print selection
4
Select Print selection, Print all images, or
DPOF printing and press the k button.
Print all images
DPOF printing
Paper size
Print selection
Select images (up to 99) and the number of copies
(up to nine) of each.
Print selection
10
•
Press the multi selector J or K to select images,
and press H or I to specify the number of
copies to be printed.
1
1
3
•
Images selected for printing are indicated by the
M icon and the numeral indicating the number of
copies to be printed. If no copies have been
specified for images, the selection is canceled.
Back
•
Rotate the zoom control to g (i) to switch back to full-frame playback or f (h)
to display six thumbnails.
•
•
Press the k button when setting is complete.
When the screen shown on the right is displayed,
select Start print and press the k button to start
Print selection
printing.
10 prints
Select Cancel and press the k button to return
to the print menu.
Start print
Cancel
E35
Print all images
One copy each of all images saved in the internal
Print all images
memory, or on the memory card, is printed.
•
When the screen shown on the right is displayed,
select Start print and press the k button to start
print. Select Cancel and press the k button to
return to the print menu.
18 prints
Start print
Cancel
DPOF printing
Print images for which a print order was created
DPOF printing
•
When the screen shown on the right is displayed,
select Start print and press the k button to start
printing. Select Cancel and press the k button to
return to the print menu.
10 prints
Start print
View images
Cancel
•
To view the current print order, select View
images and press the k button. To print images,
press the k button again.
View images
10
Back
E36
5
Printing begins.
•
Monitor display returns to the print menu shown in step 2
when printing is complete.
Printing
10
2
/
Cancel
Current number of copies/
total number of copies
C Paper Size
The camera supports the following paper sizes: Default (the default paper size for the printer
connected to the camera), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4.
Only sizes supported by the printer will be displayed.
E37
Editing Movies
The desired portions of a recorded movie can be saved as a separate file.
1
2
Play back the desired movie and pause at the start point of the portion
Press the multi selector J or K to choose the
I control, and then press the k button.
•
The movie edit screen is displayed.
1
m30s
3
Press H or I to choose the M control
(choose start point).
Choose start point
•
•
•
When editing begins, the frame where playback was
paused is the start point.
Press J or K to move the start point to the point where
you want the movie to start.
To cancel editing, press H or I to choose O (return), and
press the k button.
4
Press H or I to choose the N control
(choose end point).
Choose end point
•
Press J or K to move the end point on the right edge to
the point where you want the movie to end.
•
Select c (preview) and press the k button to play back
the specified portion of the movie that will be saved. While
the preview is playing, rotate the zoom control to adjust
the volume. While the preview is playing back, press the k
button again to stop playback.
E38
5
6
When the settings are finished, press H or I to choose m Save and
press the k button.
Choose Yes and press the k button.
•
The edited movie is saved.
Save OK?
Yes
No
B Notes About Movie Editing
• Use a sufficiently charged battery to prevent the camera from turning off during editing. When the
battery level display is B, movie editing is not possible.
• A movie that was created by editing cannot be trimmed again. To trim another area of the movie,
select and edit the original movie.
• Movies are trimmed in one-second intervals, therefore the actual trimmed portion of the movie
may differ slightly from the selected start and end points. Movies cannot be trimmed so that they
are less than two seconds long.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card to save the edited copies.
C More Information
E39
The Shooting Menu (for A (Auto) Mode)
Image Mode Settings (Image Size and Quality)
Enter shooting mode M d button M Image mode M k button
You can select the combination of image size and compression ratio that is used when saving
images.
The higher the image mode setting, the larger the size at which it can be printed, but the
Compression
ratio
Aspect ratio
(horizontal to vertical)
Option1
Print size2 (cm/in.)
Q 4608×3456P
Approx. 1/4
Approx. 1/8
4:3
4:3
Approx. 39 × 29/15 × 11.5
Approx. 39 × 29/15 × 11.5
P 4608×3456
(default setting)
R 3264×2448
r 2272×1704
q 1600×1200
O 640×480
Approx. 1/8
Approx. 1/8
Approx. 1/8
Approx. 1/8
Approx. 1/8
4:3
4:3
Approx. 28 × 21/11 × 8
Approx. 19 × 14/7.5 × 5.6
Approx. 13 × 10/5.3 × 4
Approx. 5 × 4/2 × 1.5
4:3
4:3
l 4608×2592
16:9
Approx. 39 × 22/15 × 8.5
1
2
The total number of pixels captured, and the number of pixels captured horizontally and
vertically.
Example: P 4608×3456 = approx. 16 megapixels, 4608 × 3456 pixels
Print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the number of
pixels by printer resolution (dpi) and multiplying by 2.54 cm (1 in.). However, at the same image
size, images printed at higher resolutions will print smaller than the size indicated, and those
printed at lower resolutions will print larger than the size indicated.
E40
C Notes About Image Mode
• The setting is also applied to other shooting modes.
scene mode.
C Number of Images That Can Be Saved
The following table lists the approximate number of images that can be saved on a 4 GB memory
card. Note that due to JPEG compression, the number of images that can be saved may vary greatly
depending on the image content, even when using memory cards with the same capacity and the
same image mode setting.
In addition, the number of images that can be saved may vary depending on the make of the
memory card.
Image mode
Q 4608×3456P
Number of images that can be saved (4 GB)
440
890
P 4608×3456 (default setting)
R 3264×2448
1740
3500
6600
r 2272×1704
q 1600×1200
O 640×480
26300
1180
l 4608×2592
• If the number of exposures remaining is 10,000 or more, the number of exposures remaining
display shows “9999”.
• To check the number of images that can be saved in the internal memory (approx. 25 MB), remove
the memory card from the camera, and then check the number of remaining exposures displayed
in the monitor when shooting.
E41
White Balance (Adjusting Hue)
Select A (auto) mode M d button M White balance M k button
The color of light reflected from an object varies with the color of the light source. The human
brain is able to adapt to changes in the color of the light source, with the result that white
objects appear white whether seen in the shade, direct sunlight, or under incandescent
lighting. Digital cameras can mimic this adjustment by processing images according to the
color of the light source. This is known as “white balance.” For natural colors, select a white
balance setting that matches the light source before shooting.
Although Auto (default setting) can be used under most types of lighting, white balance can
be adjusted to suit the sky conditions or light source and achieve more natural color tones in
the image.
Option
a Auto
(default setting)
b Preset manual
c Daylight
Description
White balance is automatically adjusted to suit lighting conditions.
White balance adjusted for direct sunlight.
Use under incandescent lighting.
d Incandescent
e Fluorescent
f Cloudy
Use under fluorescent lighting.
Use when taking images under overcast skies.
Use with the flash.
g Flash
displayed when Auto is selected.
E42
Using Preset Manual
The preset manual option is used with mixed lighting or to compensate for light sources with a
strong color cast when the desired effect has not been achieved with white balance settings
like Auto and Incandescent (for example, to make images shot under a lamp with a red shade
look as though they had been shot under white light).
Use the procedure below to measure the white balance value under the lighting used during
shooting.
1
2
Place a white or gray reference object under the lighting that will be
used during shooting.
multi selector to select Preset manual in the
White balance
Auto
Preset manual
White balance menu, and press the k
Daylight
button.
Incandeescent
Fluoreescent
•
The camera zooms in to the position for measuring white
balance.
Cloudy
Flash
3
Select Measure.
Preset manual
•
To apply the most recently measured white balance value,
select Cancel and press the k button. The white balance
setting will not be measured again and the most recently
measured value will be set.
Cancel
Measure
E43
4
Frame the reference object in the measuring
window.
Preset manual
Cancel
Measure
Measuring window
5
Press the k button to measure a new white balance value.
•
The shutter is released and the new white-balance value for preset manual is set. No image
is saved.
B Notes About White Balance
• Set the flash to W (off) when white balance is set to any setting other than Auto and Flash
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
E44
Continuous Shooting
Select A (auto) mode M d button M Continuous M k button
Change settings to continuous or BSS (Best Shot Selector).
Option
U Single
(default setting)
Description
One image is taken each time the shutter-release button is pressed.
While the shutter-release button is held all the way down, images are
captured continuously at a rate of about 10 fps (when image mode is
set to P 4608×3456). Shooting ends when the shutter-release
button is released, or 7 images have been captured.
k Continuous H
While the shutter-release button is held all the way down, up to 6
images are captured continuously at a rate of up to about 2 fps
(when image mode is set to P 4608×3456). Shooting ends when
the shutter-release button is released.
m Continuous L
Pre-shooting cache makes it easy to capture perfect moments by
saving images from before the shutter-release button was pressed all
the way. Pre-shooting cache shooting begins when the shutter-
release button is pressed halfway, and continues when the shutter-
q Pre-shooting cache
•
•
Frame rate: Up to 18 fps
Number of frames: Up to 5 frames (including up to two frames
captured in the pre-shooting cache)
Shooting ends when the shutter-release button is released or when the
maximum number of frames has been shot.
Each time the shutter-release button is pressed all the way, 50 frames
are captured at a speed of about 1/125 s or faster.
Image mode is fixed at O (image size: 640 × 480 pixels).
n Continuous H:
120 fps
Each time the shutter-release button is pressed all the way, 25 frames
are captured at a speed of about 1/60 s or faster.
Image mode is fixed at M (image size: 1280 × 960 pixels).
j Continuous H:
60 fps
E45
Option
Description
The “Best Shot Selector” is recommended when shooting with the
flash off or the camera zoomed in, or in other situations in which
inadvertent motion can result in blurred images. When BSS is on, the
camera takes up to ten images while the shutter-release button is
held down. The sharpest image in the series is automatically selected
and saved.
D BSS
(Best Shot Selector)
Each time the shutter-release button is
pressed, the camera takes 16 shots at a rate of
about 30 fps and arranges them in a single
image.
W Multi-shot 16
•
Image mode is fixed at L (image size:
2560 × 1920 pixels).
•
Digital zoom cannot be used.
displayed when Single is selected.
E46
B Notes About Continuous Shooting
• When a setting other than Single is selected, flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the images depends on the number of images, image mode, the write speed of the
memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When Continuous is set to Pre-shooting cache, Continuous H: 120 fps, Continuous H:
60 fps, or Multi-shot 16, banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or
sodium-vapor lighting.
B Notes About BSS
BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject
moves or the composition changes.
C Images Captured in Continuous Shooting Mode
Each time images are captured using Continuous H, Continuous L, Pre-shooting cache,
Continuous H: 120 fps, or Continuous H: 60 fps, the captured images are saved as a “sequence”
E47
C Pre-shooting Cache
When Pre-shooting cache is selected, shooting begins when the shutter-release button is pressed
halfway for 0.5 seconds or longer, and images captured before the shutter-release button is pressed
all the way are saved along with images captured after the shutter-release button is pressed all the
way. Up to two images can be saved in the pre-shooting cache.
shooting cache icon (Q) lights in green while the shutter-release button is pressed halfway.
Press down halfway
Press down all the way
Images saved by pressing halfway
Images saved by pressing all
the way
• If the number of exposures remaining is less than five, shooting with the pre-shooting cache is not
possible. Before shooting, check that there are five or more exposures remaining.
C More Information
information.
E48
ISO Sensitivity
Select A (auto) mode M d button M ISO sensitivity M k button
When ISO sensitivity is increased, less light is needed when taking images.
Higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects
of similar brightness, images can be taken at faster shutter speeds, and blurring caused by
camera shake and subject movement can be reduced.
•
Although higher ISO sensitivity is effective when shooting darker subjects, shooting
without the flash, shooting while using the zoom, etc., images may contain noise.
Option
Description
Sensitivity is ISO 125 when there is sufficient lighting; the camera
compensates by raising sensitivity to a maximum of ISO 1600 when
lighting is dim.
a Auto (default
setting)
Select the range in which the camera automatically adjusts ISO
sensitivity, from ISO 125-400 or ISO 125-800. The camera will not
increase sensitivity beyond the maximum value in the selected range.
Set the maximum value for ISO sensitivity for effective control over
the amount of “grain” that appears in images.
I Fixed range auto
125, 200, 400, 800, 1600,
3200
Sensitivity is locked at the specified value.
•
When Auto is selected, the E icon is not displayed at ISO 125, but is displayed if the ISO
sensitivity automatically increases to more than 125.
•
When Fixed range auto is selected, U and the maximum value for ISO sensitivity is
displayed.
B Notes About ISO Sensitivity
than Auto.
E49
Color Options
Select A (auto) mode M d button M Color options M k button
Make colors more vivid or save images in monochrome.
Option
Description
n Standard color
(default setting)
Use for images exhibiting natural color.
o Vivid color
p Black-and-white
q Sepia
Use to achieve a vivid, “photoprint” effect.
Save images in black-and-white.
Save images in sepia tones.
r Cyanotype
Save images in cyan-blue monochrome.
color is selected, no icon is displayed. Color tones shown in the monitor during shooting
change according to the selected color option.
B Notes About Color Options
E50
AF Area Mode
Select A (auto) mode M d button M AF area mode M k button
Use this option to determine how the camera selects the focus area for autofocus.
Option
Description
When the camera detects a human face,
it focuses on that face. See “Using Face
If more than one face is detected, the
camera focuses on the face closest to the
camera.
25
m
0s
890
Focus area
a Face priority
When taking images of subjects other
than people, or framing a subject with
which no face is detected, the camera
will automatically select the focus area
(up to nine areas) containing the subject
closest to the camera.
When the shutter-release button is
pressed halfway, the focus areas that are
in focus (up to nine areas) selected by the
camera will be displayed in the monitor.
1/250
F3.5
Focus areas
E51
Option
Description
Select one of 99 focus areas in the
Selectable focus area
monitor. This option is suited to
situations in which the intended subject
is relatively still and not positioned in the
center of the frame.
Press the multi selector H, I, J, or K to
move the focus area to where the subject
is, and take an image.
x Manual
To cancel focus area selection and adjust
flash, macro mode, self-timer, and
exposure compensation settings, press
the k button. To return to the focus area
selection screen, press the k button
again.
Focus area
The camera focuses on the subject in the
center of the frame.
The focus area is always displayed in the
center of the screen.
y Center
25
m
0s
890
Focus area
Use this function to take images of
moving subjects. Register the subject on
which the camera will focus. The focus
area will automatically move to track the
subject. See “Using Subject Tracking”
s Subject
tracking
Start
E52
Using Subject Tracking
Select
A
(auto) mode M d button
M
AF area mode M k button M s Subject
tracking M k button M d button
Use this mode to focus on a subject that is moving when taking images. When you register a
subject, subject tracking begins and the focus area automatically follows the subject.
1
Register a subject.
•
Align the subject that you want to register with the white
border in the center of the monitor and press the k button.
When the camera is unable to focus on the subject, the
border will glow red. Change the composition and try
registering the subject again.
•
•
When the subject is registered, a yellow border (focus area)
is displayed around that subject and the camera begins
tracking that subject.
Start
•
•
To cancel subject registration, press the k button.
If the camera can no longer track the registered subject, the focus area will disappear and
the registration will be canceled. Register the subject again.
2
Press the shutter-release button fully to take
the image.
•
The camera focuses on the focus area when the shutter
release button is pressed halfway. The focus area will glow
green and focus will be locked.
•
If the shutter-release button is pressed halfway while the
focus area is not displayed, the camera focuses on the area
in the center of the frame.
1/250
F3.5
B Notes About Subject Tracking
• Adjust zoom position, flash mode, exposure compensation, and menu settings prior to registering
the subject.
• Subject tracking may not be possible in certain shooting conditions.
• Digital zoom cannot be used.
E54
Autofocus Mode
Select A (auto) mode M d button M Autofocus mode M k button
Select how the camera focuses.
Option
Description
A Single AF
(default setting)
The camera focuses when the shutter-release button is pressed
halfway.
The camera focuses continuously until the shutter-release button is
pressed halfway. Use with moving subjects. The sound of lens drive
movement will be heard while the camera focuses.
B Full-time AF
C Autofocus Mode for Movie Recording
E55
Quick Effects
Select A (auto) mode M d button M Quick effects M k button
Enable or disable the quick effects function.
Option
Description
In A (auto) mode, press the k button immediately after releasing the
shutter to display the effect selection screen and use the quick effects
p On (default
setting)
Off
Disables the quick effects function (during shooting).
displayed when Off is selected.
B Notes About Quick Effects
E56
The Smart Portrait Menu
•
mode.
Skin Softening
Enter shooting mode M A (shooting mode) M F Smart portrait M k button M d
button M Skin softening M k button
Enable skin softening.
Option
Description
S High
When the shutter is released, the camera detects one or more
human faces (up to three), and processes the image to soften
facial skin tones before saving the image. You can select the
amount of effect that is applied.
R Normal (default setting)
Q Low
Off
Turns skin softening off.
displayed when Off is selected. The effects of skin softening are not visible when framing
images for shooting. Check the degree of skin softening performed in playback mode.
E57
Smile Timer
Enter shooting mode M A (shooting mode) M F Smart portrait M k button M d
button M Smile timer M k button
The camera detects human faces and then automatically releases the shutter whenever a
smile is detected.
Option
a On (single)
Description
Whenever a smile is detected, the camera takes one image.
Whenever a smile is detected, the camera captures up to 5
images continuously and saves them all. The flash cannot be
used.
aC On (continuous)
•
Continuous shooting speed: Approx. 3.3 fps (when image
mode is set to P 4608×3456)
Whenever a smile is detected, the camera captures up to 5
images continuously and saves the one that best captured the
smile. The flash cannot be used.
aD On (BSS)
(default setting)
•
Continuous shooting speed: Approx. 3.3 fps (when image
mode is set to P 4608×3456)
Off
Turns the smile timer off.
displayed when Off is selected.
C Camera Settings That Cannot Be Used Simultaneously
E58
Blink Proof
Enter shooting mode M A (shooting mode) M F Smart portrait M k button M d
button M Blink proof M k button
The camera automatically releases the shutter twice each time an image is taken. Of the two
shots, one in which the subject’s eyes are open is saved.
Option
Description
Enables blink warning.
Flash cannot be used when On
is selected.
A blink was detected in the
picture just taken.
If the camera saved an image in
which the subject’s eyes may
have been closed, the dialog
shown on the right is displayed
for a few seconds.
y On
Off (default setting)
Turns the blink warning off.
displayed when Off is selected.
C Camera Settings That Cannot Be Used Simultaneously
E59
The Playback Menu
•
•
Remove from favorites.
Print Order (Creating a DPOF Print Order)
Press the c button (playback mode) M d button M Print order M k button
When printing images saved on the memory card using any of the following methods, the
Print order option in the playback menu is used to create digital “print orders” for printing
on DPOF-compatible devices.
•
•
•
Taking the memory card to a digital photo lab.
can also be created for images saved in the internal memory if the memory card is
removed from the camera.
1
Use the multi selector to select Select images
and press the k button.
Print order
•
In favorite pictures, auto sort, or list by date mode, the
screen shown on the right is not displayed. Proceed to the
step 2.
Select images
Delete print order
E60
2
3
Select images (up to 99) and the number of
copies (up to nine) of each.
Print selection
•
Press the multi selector J or K to select images, and press
H or I to specify the number of copies to be printed.
1
1
3
•
Images selected for printing are indicated by the M icon
and the numeral indicating the number of copies to be
printed. If no copies have been specified for images, the
selection is canceled.
Back
•
•
Rotate the zoom control to g (i) to switch to full-frame playback. Rotate the zoom control
to f (h) to switch back to six-thumbnail display.
Press the k button when setting is complete.
Select whether or not to print shooting date
and shooting information.
Print order
Done
•
Select Date and press the k button to print the shooting
date on all images in the print order.
•
Select Info and press the k button to print shooting
information (shutter speed and aperture value) on all
images in the print order.
Date
Info
•
•
Select Done and press the k button to complete the print
order.
E61
B Notes About Print Order
• Print orders cannot be created for images captured in 3D photography scene mode.
• When a print order is created in favorite pictures mode, auto sort mode, or list by date mode, the
screen shown below is displayed if images other than those in the selected album, category, or
shooting date have been marked for printing.
- If you select Yes, print order settings for other images are not changed and only the current
print order settings are changed.
- Select No to remove print marking from previously marked images and restrict the print order to
images in the selected category or captured on the selected shooting date.
Print order
Print order
Save print marking for other
images?
Save print marking for other
dates?
Yes
No
Yes
No
Favorite pictures mode or
auto sort mode
List by date mode
If the total number of the images in a print order exceeds 99, the screen shown below will be
displayed.
- Select Yes to remove images previously added from the print order and restrict the print order
to images just marked.
- Select Cancel to remove the images just added from the print order and restrict the print order
to images previously marked.
Print order
Print order
Too many images selected.
Remove print marking from
other images?
Too many images selected.
Remove print marking for
other dates?
Yes
Yes
Cancel
Cancel
Favorite pictures mode or
auto sort mode
List by date mode
E62
B Notes About Printing Shooting Date and Shooting Information
When the Date and Info settings are enabled in the print order option, shooting date and shooting
of shooting date and shooting information is used.
• Shooting information cannot be printed when the camera is connected to a DPOF-compatible
• Note that Date and Info settings are reset each time the Print order option is displayed.
• The date printed is that saved when the image was captured.
Changing the camera’s date using the Date and time or Time
zone in the Time zone and date option in the setup menu after
an image has been captured has no effect on the date printed on
the image.
15.05.2013
C Canceling Existing Print Order
the k button to remove print marking from all images and cancel the print order.
C Print Date
on images at the time of shooting. Images with the date imprinted on them can be printed from
printers that do not support printing of the date on images.
Only the date and time imprinted on images with the print date option will be printed, even if the
Print order date option is enabled.
E63
Slide Show
Press the c button (playback mode) M d button M Slide show M k button
Play back images, saved in the internal memory or on a memory card, one by one in an
automated “slide show.”
1
Use the multi selector to select Start and
press the k button.
Slide show
•
To change the interval between images, select Frame
intvl, select the desired interval time, and press the k
button before selecting Start.
Start
Frame intvl
Loop
•
To repeat the slide show automatically, select Loop and
press the k button before selecting Start. The check mark
(w) will be added to the loop option when enabled.
Pause
2
3
The slide show begins.
•
While the slide show is in progress, press the multi selector
K to display the next image or J to display the previous
image. Hold down either button to fast forward or rewind.
•
To end or pause the slide show, press the k button.
Choose End or Restart.
•
The display at right appears when the last slide is displayed
or the show is paused. Highlight G and press the k
button to return to Step 1, or select F to restart the show.
E64
B Notes About Slide Show
• Only the first frame of movies included in a slide show is displayed.
picture is displayed.
slide show. They do not scroll.
Protect
Press the c button (playback mode) M d button M Protect M k button
Protects selected images from accidental deletion.
Select images to protect or cancel protection for previously protected images from the image
Note that formatting the camera’s internal memory or the memory card will permanently
E65
The Image Selection Screen
When using one of the following features, a screen like that
shown on the right is displayed when selecting images.
Protect
•
•
•
•
•
•
•
•
•
Back
Follow the procedures described below to select the images.
1
Press the multi selector J or K to select an
image.
Protect
•
frame playback or f (h) to switch back to six-thumbnail
display.
•
Only one image can be selected for Rotate image,
Choose key picture, and Welcome screen. Proceed to
step 3.
Back
2
Press H or I to select or deselect (or to
specify the number of copies).
Protect
•
When an image is selected, an icon is displayed below the
image. Repeat steps 1 and 2 to select additional images.
Back
E66
3
Press the k button to apply image selection.
•
When Selected images is selected, a confirmation dialog is displayed. Follow the
instructions displayed in the monitor.
E67
Rotate Image
Press the c button (playback mode) M d button M Rotate image M k button
Specify the orientation in which saved images are displayed during playback. Still images can
be rotated 90 degrees clockwise or 90 degrees counterclockwise.
displayed, press the multi selector J or K to rotate the image 90 degrees.
Rotate image
Rotate image
Rotate image
Rotate
Rotate
Rotate
Back
Back
Back
Rotate 90 degrees
counterclockwise
Rotate 90 degrees
clockwise
Press the k button to finalize display orientation, and save orientation information with the
image.
B Notes About Image Rotation
• Images captured with another make or model of digital camera or captured with 3D
• Images captured in sequence cannot be rotated when only the key pictures are displayed for
E68
Voice Memo
Press the cbutton (playback mode) Mselect an image Mdbutton M
Voice memo Mkbutton
Use the camera’s microphone to record voice memos for images.
•
The voice memo recording screen is displayed for images that do not have a voice memo,
and the voice memo playback screen is displayed for images that have a voice memo (i.e.,
images that display p in full-frame playback mode).
Recording Voice Memos
•
Press and hold the kbutton to record a voice memo (up to
20 seconds).
•
•
•
Do not touch the microphone during recording.
During recording, o and p flash in the monitor.
When recording ends, the voice memo playback screen is
displayed.
•
Press the multi selector Jbefore or after recording a voice
memo to return to the playback menu. Press the d
button to exit the playback menu.
17s
Playing Voice Memos
p is displayed for images with a voice memo when in full-
frame playback mode.
•
•
•
Press the kbutton to play the voice memo. Press the
button again to stop playback.
Rotate the zoom control during playback to adjust playback
volume.
Press the multi selector Jbefore or after playing back a
voice memo to return to the playback menu. Press the d
button to exit the playback menu.
Back
E69
Deleting Voice Memos
File will be deleted. OK?
When the confirmation dialog is displayed, press the multi
selector Hor Ito select Yes and press the kbutton. Only
the voice memo will be deleted.
Yes
No
B Notes About Voice Memos
• When an image with a voice memo attached is deleted, both the image and its voice memo are
deleted.
• Voice memos cannot be recorded for an image that already has a voice memo attached to it. The
current voice memo must be deleted before a new voice memo can be recorded.
• The COOLPIX S5200 cannot record voice memos for images captured with another make or
model of digital camera.
• Voice memos cannot be recorded for images captured in sequence when only the key pictures
are displayed for sequences of images. First display the images individually, and then record voice
C More Information
E70
Copy (Copy Between Internal Memory and Memory Card)
Press the cbutton (playback mode) Mdbutton MCopy Mkbutton
Copy images between the internal memory and a memory card.
1
Use the multi selector to select a destination
option to which images are copied and press
the kbutton.
Copy
Camera to card
Card to camera
•
Camera to card: Copy images from internal memory to
memory card.
•
Card to camera: Copy images from memory card to
internal memory.
2
Select a copy option and press the kbutton.
Camera to card
•
Selected images: Copy images selected from the image
Selected images
All images
•
All images: Copy all images.
E71
B Notes About Copying Images
•
JPEG-, MOV-, WAV-, and MPO-format files can be copied. Files saved in any other format cannot be
copied.
with the images.
• Operation is not guaranteed with images captured with another make of camera or that have
been modified on a computer.
setting is copied.
• Images or movies copied from the internal memory or a memory card cannot be displayed in auto
C Notes About Copying Images in a Sequence
• If you select a key picture of a sequence in Selected images when only the key picture is
• If you press the dbutton and select Current sequence after you press the kbutton and
display images in a sequence as individual images, all images in the sequence are copied.
• If you press the kbutton and display images in a sequence as individual images, only Card to
camera (memory card to internal memory) image copy is available.
C If “Memory contains no images.” Is Displayed
If a memory card that contains no images is inserted into the camera, Memory contains no images.
will be displayed when the camera is switched to playback mode. Press the
d
button to select Copy
in the playback menu and copy the images saved in the camera’s internal memory to the memory card.
C More Information
E72
Sequence Display Options
Press the cbutton (playback mode) Mdbutton MSequence display options M
kbutton
Settings are applied to all sequences, and the setting is saved in the camera’s memory even if
the camera is turned off.
Option
Description
Set all images in all sequences to be displayed individually. F is
Q Individual pictures
C Key picture only
(default setting)
Set all sequences to be displayed using their key pictures only.
Choose Key Picture
Press the cbutton (playback mode) Mselect an image in a sequence M
dbutton MChoose key picture Mkbutton
When Sequence display options is set to Key picture only, the key picture displayed in
sequence of images.
•
When changing this setting, before pressing the dbutton, first select the desired
sequence using full-frame playback mode or thumbnail playback mode.
When the key picture selection screen is displayed, select an image. See “The Image
•
E73
The Movie Menu
Movie Options
Enter shooting mode Mdbutton Memenu icon MMovie options Mkbutton
Select the desired movie option to record.
to record in slow or fast motion. Larger image sizes and higher bitrates produce greater image
quality and larger movie file sizes.
Normal Speed Movie Options
Image size (recorded pixels)
Aspect ratio (horizontal to vertical)
Option
Bitrate
d 1080P/30p
(default setting)
1920×1080
16:9
Approx. 18 Mbps
Approx. 12 Mbps
Approx. 9 Mbps
Approx. 24 Mbps
Approx. 2.9 Mbps
1920×1080
16:9
e 1080/30p
f 720/30p
1280×720
16:9
960×540
16:9
p iFrame 540/30p*
g 480/30p
640×480
4:3
*
iFrame is a format supported by Apple Inc.
When recording movies to the internal memory, recording may stop unexpectedly in some
shooting conditions. When recording movies of important events, recording to a memory card
(Class 6 or higher) is recommended.
•
The frame rate is approximately 30 fps for all options.
E74
C Frame Rate and Bitrate
• The frame rate is the number of frames per second.
• The movie bitrate is the volume of movie data recorded per second. Variable bitrate (VBR)
encoding is used to automatically adjust the bitrate depending on the subject being recorded.
When recording movies of a subject with large amounts of motion, the file size increases.
HS Movie Options
Recorded movies are played back in fast or slow motion.
Image size (recorded pixels)
Option
Aspect ratio (horizontal to
vertical)
Description
1/4-speed slow motion movies are recorded.
640×480
4:3
h HS 480/4×
i HS 720/2×
j HS 1080/0.5×
•
Max. recording time*: 10 seconds
(playback time: 40 seconds)
1/2-speed slow motion movies are recorded.
1280×720
16:9
•
Max. recording time*: 30 seconds
(playback time: 1 minute)
2× speed fast motion movies are recorded.
1920×1080
16:9
•
Max. recording time*: 2 minutes (playback
time: 1 minute)
*
While recording movies, the camera can be switched between normal speed movie recording
and slow motion or fast motion movie recording.
The maximum recording time shown here refers only to the portion of the movie that is recorded
in slow motion or fast motion.
B Notes About HS Movie
• Sound is not recorded.
• Zoom position, focus, exposure, and white balance are locked when movie recording starts.
• The h HS 480/4× setting cannot be used with Soft or Nostalgic sepia in special effects
enabled. Even if you first select Soft or Nostalgic sepia in special effects mode and then switch
to another shooting mode and select h HS 480/4×, the movie options setting automatically
changes to i HS 720/2× when you return to special effects mode and select Soft or
Nostalgic sepia.
E75
C Movie Options and Maximum Movie Length
The table below shows the approximate total movie length that can be saved on a 4 GB memory
card, for each movie option.
Note that the actual movie length and file size may vary depending on the content of the movie or
on subject movement, even when using memory cards with the same capacity and the same movie
option setting.
In addition, the maximum movie length may vary depending on the make of the memory card.
Movie options
d 1080P/30p (default setting)
e 1080/30p
Maximum Movie Length (4 GB)*
25 min
40 min
50 min
15 min
f 720/30p
p iFrame 540/30p
g 480/30p
2 h 40 min
* Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when there is
sufficient free space on the memory card for longer recording.
The maximum movie length for a single movie is displayed on the shooting screen.
Recording may end before either limit is reached if camera temperature becomes elevated.
• To check the movie length of a movie that can be recorded in the internal memory (approx.
25 MB), remove the memory card from the camera, and then check the maximum recording time
displayed in the monitor when shooting.
E76
Recording Movies in Slow Motion and Fast Motion (HS Movie)
Enter the shooting mode Mdbutton MD menu icon MMovie options Mk
button
HS (high speed) movies can be recorded. The portions of the movie recorded using HS movie
can be played back in slow motion at 1/4 or 1/2 of the normal playback speed, or in fast
motion at twice the normal playback speed.
1
Press Hor Ito select an HS movie option
Movie options
1080 /30p
1080/30p
720/30p
•
After applying the option, press the dbutton to return
to the shooting screen.
iFrame 540/30p
480/30p
HS 480/4×
2
Press the b(emovie-record) button to start
recording.
•
Movie recording starts in HS mode when the Open with
HS footage checkbox in the movie menu is checked.
5s
When recording HS movies
E77
•
Movie recording starts at normal speed when the Open
with HS footage checkbox in the movie menu is not
checked. Press the kbutton to switch to HS movie
recording at the point where the camera should record for
slow motion or fast motion playback.
16m30s
When recording normal
speed movies
•
When an HS movie reaches the maximum length for HS
movie recording. The camera switches between normal speed movie recording and HS
movie recording each time the kbutton is pressed.
•
•
When recording HS movies, the maximum movie length display changes and displays the
remaining movie length for HS movie recording.
The movie options icon changes when switching between HS movie recording and normal
speed movie recording.
3
Press the b(emovie-record) button to end recording.
E78
C HS Movie
Recorded movies are played back at about 30 frames per second.
played back in slow motion can be recorded. When set to j HS 1080/0.5×, movies that can be
played back in fast motion at a speed two times faster than normal speed can be recorded.
Portions recorded at h HS 480/4×:
High-speed recording is possible for up to ten seconds, and the captured portion is played back in
slow motion at a speed four times slower than normal speed.
Recording
Playback
10 s
40 s
Slow motion playback
(no sound)
Portions recorded at j HS 1080/0.5×:
A movie of up to two minutes in length is recorded when shooting for the purpose of high-speed
playback. Playback is two times faster.
2 min
Recording
1 min
Playback
Fast motion playback
(no sound)
E79
Open with HS Footage
Enter shooting mode Mdbutton MD menu icon MOpen with HS footage M
kbutton
Select whether the camera records normal speed movies or HS movies (slow motion or fast
motion movies) when movie recording starts.
Option
Description
On (default setting)
Record HS movies when movie recording begins.
Record normal speed movies when movie recording begins. Press
the kbutton to switch to HS movie recording at the point where
the camera should record for slow motion or fast motion playback.
Off
Autofocus Mode
Enter shooting mode Mdbutton Memenu icon MAutofocus mode Mkbutton
Select how the camera focuses in movie mode.
Option
Description
Focus is locked when the b(emovie-record) button is pressed to
start recording.
A Single AF
(default setting)
Select this option when the distance between the camera and the
subject will remain fairly consistent.
Camera focuses continuously.
Select this option when the distance between the camera and
subject will change significantly during recording. The sound of the
camera focusing may be heard in the recorded movie. Use of Single
AF is recommended to prevent the sound of the camera focusing
from interfering with recording.
B Full-time AF
•
When an HS movie option is selected in Movie options, the setting is fixed at Single AF.
E80
Wind Noise Reduction
Enter shooting mode Mdbutton Memenu icon MWind noise reduction M
kbutton
Allows you to reduce wind noise during movie recording.
Option
Description
Reduces the sound produced when wind passes over the
Y On
Off (default setting)
microphone. Use when recording movies in locations with strong
winds. Other sounds may become difficult to hear during playback.
Wind noise reduction is not enabled.
•
•
displayed when Off is selected.
When an HS movie option is selected in Movie options, the setting is fixed at Off.
E81
The Setup Menu
Welcome Screen
Press the dbutton Mz menu icon MWelcome screen Mkbutton
Allows you to configure the welcome screen that is displayed when you turn on the camera.
Option
Description
None
(default setting)
The camera enters shooting or playback mode without displaying
the welcome screen.
The camera displays a welcome screen and enters shooting or
playback mode.
COOLPIX
Displays an image selected for the welcome screen. When the image
kbutton.
•
As the selected image is saved in the camera, it will be displayed
when the camera is turned on even if the original image is deleted.
l 4608×2592, images captured using Easy panorama or 3D
photography, and copies created at a size of 320 × 240 or smaller
selected.
Select an image
•
E82
Time Zone and Date
Press the dbutton Mz menu icon MTime zone and date Mkbutton
Set the camera clock.
Option
Description
Set camera clock to current date and time.
Use the multi selector to set the date and
time in the date screen.
Date and time
D
0 1
M
0 1
Y
2 0 1 3
•
Select an item: Press the multi selector K
or J(changes between D, M, Y, hour,
and minute).
Date and time
0 0
0 0
•
•
Edit the date and time: Press Hor I.
Apply the setting: Select the minute
setting and press the kbutton.
Edit
The available date formats are Year/Month/Day, Month/Day/Year, and
Day/Month/Year.
Date format
Time zone
Home time zone (w) can be specified and daylight saving time can be
enabled or disabled. When Travel destination (x) is selected, the time
difference between the travel destination and the home time zone (w) is
automatically calculated and the date and time in the selected region are
saved. This can be useful when travelling.
Selecting the Travel Destination Time Zone
1
Use the multi selector to select Time zone
and press the kbutton.
Time zone and date
Date and time
Date format
Time zone
London, Casablanca
1 5 / 0 5 / 2 0 1 3 1 5 :3 0
E83
2
3
4
Select x Travel destination and press the k
button.
Time zone
Home time zone
Travel destination
•
The date and time displayed in the monitor changes
according to the region currently selected.
London, Casablanca
1 5 / 0 5 / 2 0 1 3 1 5
:3 0
Press K.
Time zone
•
The travel destination screen is displayed.
Home time zone
Travel destination
London, Casablanca
1 5 / 0 5 / 2 0 1 3 1 5 :3 0
Press Jor Kto select the travel destination
time zone.
New York, Toronto, Lima
10
:30
•
If daylight saving time is in effect, press Hto enable
daylight saving time function. W is displayed above the
map and the camera clock is advanced one hour. Press I
to disable the daylight saving time function.
•
•
•
Press the kbutton to apply the travel destination time
zone.
If the time zone that you want to select is not available, set
the appropriate time in Date and time.
While the travel destination time zone is selected, the Z
icon will be displayed in the monitor when the camera is in
shooting mode.
Back
Time zone
Home time zone
Travel destination
New York, Toronto, Lima
1 5 / 0 5 / 2 0 1 3 1 0 :3 0
E84
C w Home Time Zone
• To switch to the home time zone, select w Home time zone in step 2 and press the kbutton.
• To change the home time zone, select w Home time zone in step 2 and perform the same
procedure as for x Travel destination to set the home time zone.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
C Imprinting Date on Images
When the Print date option is enabled, images will be saved with shooting date imprinted on
them.
E85
Monitor Settings
Press the dbutton Mz menu icon MMonitor settings Mkbutton
Set the options below.
Option
Photo info
Description
Select information displayed in the monitor during shooting and playback.
This setting determines whether or not the captured image is displayed
immediately after shooting. The default setting is On.
Image review
Brightness
Select from five settings for monitor brightness. The default setting is 3.
Photo Info
Select whether or not the photo information is displayed in the monitor.
Shooting mode Playback mode
15
/
05/2013 15:30
0004. JPG
Show info
Auto info
25
m
0s
890
4
/
4
Current settings and operational guides are displayed as in Show info
If no operations are performed for a few seconds, the information is hidden as
.
(default setting) in Hide info. Information will be displayed again when the next operation is
performed.
Hide info
E86
Shooting mode
Playback mode
15
/
05/2013 15:30
0004. JPG
25
m
0s
Framing
grid+auto info
890
4
/
4
In addition to information shown with
Auto info, a framing grid is displayed to
The current settings or
operation guide is displayed as
help frame images. It is not displayed when in Auto info.
recording movies.
15
/
05/2013 15:30
0004. JPG
25
m
0s
Movie
890
4
/
4
frame+auto info
In addition to information shown with
Auto info, a frame is displayed before
recording begins that represents the area
that will be captured when recording
movies.
The current settings or
operation guide is displayed as
in Auto info.
It is not displayed when recording movies.
B Notes About Monitor Settings
C Battery Level
When the battery level is low, B is always displayed regardless of the Photo info setting.
E87
Print Date (Imprinting Date and Time)
Press the dbutton Mz menu icon MPrint date Mkbutton
The shooting date and time can be imprinted on the images
when shooting, allowing the information to be printed even
15.05.2013
Option
f Date
Description
Date is imprinted on images.
S Date and time
Date and time are imprinted on images.
Off (default setting)
Date and time are not imprinted on images.
displayed when Off is selected.
E88
B Notes About Print Date
• Imprinted dates form a permanent part of image data and cannot be deleted. The date and time
cannot be imprinted on images after they have been captured.
• The date cannot be imprinted in the following situations:
- When using Night portrait (when Hand-held is selected), Night landscape (when Hand-
held is selected), Easy panorama, or 3D photography scene mode
120 fps, or Continuous H: 60 fps
- When shooting movies
Select an Image mode setting of q 1600×1200 or larger when using print date.
• The date is saved using the format selected in the setup menu’s Time zone and date item
C Print Date and Print Order
When printing with a DPOF-compatible printer that can print the shooting date and shooting
the Print date function was set to Off at the time of shooting.
E89
Vibration Reduction
Press the dbutton Mz menu icon MVibration reduction Mkbutton
Reduce the effects of camera shake while shooting. Vibration reduction effectively reduces
blur, caused by slight hand movement known as camera shake, which commonly occurs
when shooting with zoom applied or at slow shutter speeds. The effects of camera shake are
reduced when recording movies, in addition to when taking still images.
Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
Option
Description
Vibration reduction is enabled.
Vibration reduction is disabled.
g On
(default setting)
Off
displayed when Off is selected.
B Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting mode, wait for the
shooting mode screen to be displayed completely before taking images.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When Tripod is selected in Night landscape or Night portrait scene mode, vibration reduction
is turned off.
E90
Motion Detection
Press the dbutton Mz menu icon MMotion detection Mkbutton
Enable motion detection to reduce the effects of subject movement and camera shake when
shooting still images.
Option
Description
When the camera detects subject movement or camera shake, the
ISO sensitivity and shutter speed are automatically increased to
reduce blurring.
However, motion detection does not function in the following
situations:
•
•
When the flash fires
in A (auto) mode
•
•
•
Auto in A (auto) mode
(auto) mode
U Auto
(default setting)
•
in smart portrait mode
Off
Motion detection is disabled.
When the camera detects camera shake or subject movement, it increases shutter speed and
the motion detection icon turns green. No icon is displayed when Off is selected.
B Notes About Motion Detection
• Motion detection may be unable to completely eliminate the effects of subject movement and
camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The images captured using motion detection may be somewhat “grainy” in appearance.
E91
AF Assist
Press the dbutton Mz menu icon MAF assist Mkbutton
Enable or disable AF-assist illuminator, which assists autofocus operation when the subject is
dimly lit.
Option
Description
AF-assist illuminator will be used to assist the focus operation when
the subject is dimly lit. The illuminator has a range of about 3.0 m (9 ft
10 in.) at the maximum wide-angle position and about 2.0 m (6 ft
6 in.) at the maximum telephoto position.
light even when Auto is selected.
a Auto
(default setting)
AF-assist illuminator does not light. The camera may be unable to
focus under dim lighting.
Off
E92
Digital Zoom
Press the dbutton Mz menu icon MDigital zoom Mkbutton
Enable or disable digital zoom.
Option
Description
When the camera is zoomed in to the maximum optical zoom
position, rotating the zoom control to g(i) triggers digital zoom
On
(default setting)
Off
Digital zoom will not be activated.
B Notes About Digital Zoom
• When digital zoom is in effect, the camera focuses on the area in the center of the frame.
• Digital zoom cannot be used in the following situations.
- When Continuous
- When AF area mode
- When Scene auto selector
(
Portrait Night portrait Night landscape
Pet portrait, or 3D photography is selected in scene
A
(auto) mode
(auto) mode
Backlighting (when
(
A
,
,
,
,
HDR is set to On), Easy panorama
,
mode
- When smart portrait mode is selected
E93
Sound Settings
Press the dbutton Mz menu icon MSound settings Mkbutton
Adjust the following sound settings.
Option
Description
Select On (default setting) or Off. When On is selected, a beep will
sound once when operations are completed successfully, twice
when the camera acquires focus on the subject, and three times
when an error is detected. Start-up sound will also play when the
camera is turned on.
Button sound
Select On (default setting) or Off.
Shutter sound
The shutter sound is disabled when using a continuous shooting
mode or setting, or when recording movies, even if On is selected.
B Notes About Sound Settings
Button sounds and the shutter sound are disabled when using the Pet portrait scene mode.
E94
Auto Off
Press the dbutton Mz menu icon MAuto off Mkbutton
If no operations are performed for a specified amount of time, the monitor turns off and the
This setting determines the amount of time that passes before the camera enters standby
mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min.
C When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp flashes.
• If no operations are performed for approximately another three minutes, the camera will turn off
automatically.
• When the power-on lamp is flashing, pressing any of the following buttons will turn the monitor
back on:
Power switch, shutter-release button, A button, cbutton, or b(emovie-record) button
C Notes About Auto Off
• The time that passes before the camera enters standby mode is fixed in the following situations:
- When a menu is displayed: Three minutes minimum (or 5 min or 30 min, if these settings are
selected)
- During slide show playback: Up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
- When an audio video cable or HDMI cable is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
E95
Format Memory/Format Card
Press the dbutton Mz menu icon MFormat memory/Format card Mkbutton
Use this option to format the internal memory or a memory card.
Formatting the internal memory or memory cards permanently deletes all data. Data
that has been deleted cannot be restored. Be sure to transfer important images to a
computer before formatting.
Formatting the Internal Memory
To format the internal memory, remove the memory card from
Format memory
the camera. The Format memory option is displayed in the
setup menu.
All images will
be deleted! OK?
Format
No
Formatting Memory Cards
A memory card can be formatted when it is inserted in the
Format card
camera. The Format card option is displayed in the setup
menu.
All images will
be deleted! OK?
Format
No
E96
B Notes About Formatting Internal Memory and Memory Cards
memory or memory card is formatted.
• Do not turn the camera off or open the battery-chamber/memory card slot cover during
formatting.
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
E97
Language
Press the dbutton Mz menu icon MLanguage Mkbutton
Select one of 34 languages for display of camera menus and messages.
Czech
Finnish
Danish
Swedish
Vietnamese
Turkish
German
(default setting)
Spanish
Ukrainian
Arabic
Greek
French
Bengali
Indonesian
Italian
Simplified Chinese
Traditional Chinese
Hindi
Hungarian
Dutch
Japanese
Korean
Norwegian
Polish
Marathi
Brazilian Portuguese
European Portuguese
Russian
Persian
Tamil
Telugu
Romanian
Thai
E98
TV Settings
Press the dbutton Mz menu icon MTV settings Mkbutton
Adjust settings for connection to a TV.
Option
Video mode
Description
Select from NTSC and PAL.
Select a resolution for HDMI output from Auto (default setting),
480p, 720p, or 1080i. When Auto is selected, the option best suited
to the TV to which the camera is connected is automatically selected
from 480p, 720p, or 1080i.
HDMI
Select whether or not the camera can receive signals from a TV that
supports the HDMI-CEC standard when it is connected to the TV via
HDMI. When On (default setting) is selected, the TV’s remote control
can be used to control the camera during playback. See “Using a TV
information.
HDMI device control
HDMI 3D output
Set the method used to output 3D images captured with this camera
to HDMI devices. Select On (default setting) to play back 3D images
in 3D.
C HDMI and HDMI-CEC
HDMI (High-Definition Multimedia Interface) is a multimedia interface. HDMI-CEC (HDMI-Consumer
Electronics Control) allows compatible devices to inter-operate.
E99
Charge by Computer
Press the dbutton Mz menu icon MCharge by computer Mkbutton
Select whether or not the battery inserted in the camera is charged when the camera is
Option
Description
When the camera is connected to a computer that is running, the
battery inserted into the camera is automatically charged using
power supplied by the computer.
a Auto
(default setting)
Off
The battery inserted into the camera is not charged when the camera
is connected to a computer.
B Notes About Charging with Connection to a Computer
• The battery cannot be charged, nor can data be transferred, when the camera is connected to a
battery can be charged or images can be transferred with connection to a computer. In this case,
and time.
• If the camera is turned off, charging will also stop.
• If the computer enters sleep mode while charging, charging will stop and the camera may turn off.
• When disconnecting the camera from the computer, turn the camera off and then disconnect the
USB cable.
• About 3 hours and 15 minutes are required to charge a fully exhausted battery. Charging time
increases when images are transferred while the battery is charging.
• When the camera is connected to a computer, an application installed on the computer, such as
Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of
charging the battery, exit the application.
• The camera turns off automatically if there is no communication with the computer for 30 minutes
after the battery has finished charging.
• Depending upon computer specifications, settings, and power supply and allocation, it may be
impossible to charge the battery using a computer connection while it is inserted into the camera.
E100
B Notes About Connecting the Camera to a Printer
• The battery cannot be charged with connection to a printer, even if the printer complies with the
PictBridge standard.
• When Auto is selected for Charge by computer, it may be impossible to print images with direct
connection of the camera to some printers. If the PictBridge startup screen is not displayed in the
monitor after the camera is connected to a printer and turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the
printer.
C The Charge Lamp
The following chart explains charge lamp status when the camera is connected to a computer.
Status
Description
Flashes slowly (green)
Battery charging.
Battery not charging.
Off
If the charge lamp changes from slow flashing (green) to off while the
power-on lamp is lit, charging is complete.
•
The ambient temperature is not suited to charging. Charge the
battery indoors with an ambient temperature of 5°C to 35°C (41°F
to 95°F).
•
The USB cable is not connected correctly, or the battery is faulty.
Make sure the USB cable is connected correctly and replace the
battery if necessary.
Flashes quickly (green)
•
•
The computer is in sleep mode and is not supplying power. Wake
up the computer.
The battery cannot be charged because the computer cannot
supply power to the camera due to the computer’s settings or its
specifications.
E101
Blink Warning
Press the dbutton Mz menu icon MBlink warning Mkbutton
Select whether or not the camera detects human subjects that have blinked using face
•
•
Option
Description
When the camera detects that one or more human subjects may
have blinked in an image captured using face detection, the Did
someone blink? screen is displayed in the monitor.
The face of the human subject that may have blinked when the
shutter was released is framed by a yellow border. Should this occur,
check the image and determine whether or not another image
should be captured.
On
Off
Blink warning is disabled.
(default setting)
B Notes About Blink Warning
E102
The Blink Warning Screen
When the Did someone blink? screen shown on the right is
displayed in the monitor, the operations described below are
available.
Did someone blink?
If no operations are performed within a few seconds, the
camera automatically returns to shooting mode.
Exit
Function
Control
Description
Enlarge the detected
face that blinked
g(i)
Rotate the zoom control to g(i).
Switch to full-frame
playback
f(h)
Rotate the zoom control to f(h).
If the camera detects that more than one human
subject blinked, press Jor Kto switch the display
to another face.
Select the face to be
displayed
Delete the image
l
Press the lbutton.
k
Switch to shooting
mode
Press the kbutton or the shutter-release button.
E103
Wi-Fi Options
Press the dbutton Mz menu icon MWi-Fi options Mkbutton
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart device.
Option
Description
When wirelessly connecting the camera and a smart device, set
Wi-Fi network
Change the SSID. The SSID configured here is displayed on the
smart device. Set a 1- to 24-character alphanumeric SSID.
SSID
Select whether or not to encrypt the communications between
the camera and the connected smart device.
Communications are not encrypted when Open (default
setting) is selected.
Auth./encryp.
Password
Set the password. Set a 8- to 16-character alphanumeric
password.
Channel
Select the channel used for wireless connections.
Display the current settings.
Current settings
Restore factory defaults Restore the Wi-Fi settings to their default values.
E104
Operating the Text Input Keyboard
•
Press the H, I, J, or K to select alphanumeric characters.
Press the k button to enter the selected character in the
text field and move the cursor to the next space.
To move the cursor in the text filed, select N or O on the
keyboard, and press the k button.
Text field
SSID
•
•
•
To delete one character, press the l button.
To apply the setting, select P on the keyboard and press
the k button.
Back
Delete
Keyboard
B Notes About Wi-Fi Network
Wi-Fi network cannot be selected in the following situations:
• When an HDMI, USB or audio/video cable is connected to the camera
• When no memory card is inserted in the camera
• When an Eye-Fi card is inserted in the camera
• When the battery level indicator in the monitor indicates B
E105
Eye-Fi Upload
Press the dbutton Mz menu icon MEye-Fi upload Mkbutton
Option
b Enable
Description
Upload images created by the camera to a preselected destination.
Images will not be uploaded.
(default setting)
c Disable
B Notes About Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Select Disable where wireless devices are prohibited.
• Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.
• The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of images taken may
not be displayed correctly.
• Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
C Eye-Fi Communication Indicator
• w: Eye-Fi upload is set to Disable.
• x (lights): Eye-Fi upload enabled; waiting to begin upload.
• x (flashes): Eye-Fi upload enabled; uploading data.
• y: Eye-Fi upload enabled but no images available for upload.
• z: An error occurred. The camera cannot control the Eye-Fi card.
E106
Reset All
Press the dbutton Mz menu icon MReset all Mkbutton
When Reset is selected, the camera’s settings will be restored to their default values.
Basic Shooting Functions
Option
Default value
Auto
Off
Off
0.0
Shooting Menu
Option
Default value
P 4608×3456
Auto
Single
Auto
Standard color
Target finding AF
Single AF
On
E107
Scene Mode
Option
Default value
Scene auto selector
Scene mode setting in the shooting mode selection
Hand-held
Hand-held
Center
Off
Normal (180°)
Continuous
Y
Special effects mode
Option
Default value
Special effects mode setting in the shooting mode
Soft
Smart Portrait Menu
Option
Default value
Normal
On (BSS)
Off
Movie Menu
Option
Default value
1080P/30p
On
Single AF
Off
E108
Setup Menu
Option
Default value
None
Auto info
On
3
Off
On
Auto
Auto
On
On
On
1 min
Auto
On
On
Auto
Off
Off
NikonS5200xxxxxxxx
Open
NikonCoolpix
1
Enable
E109
Others
Option
Default value
Default
3 s
Key picture only
•
•
will continue from the lowest number available. To reset file numbering to “0001”, delete
Reset all.
The following menu settings will remain unaffected when menus are reset with Reset all.
Firmware Version
Press the dbutton Mz menu icon MFirmware version Mkbutton
View the current camera firmware version.
Back
E110
File and Folder Names
Images, movies, or voice memos are assigned file names as follows.
DSCN0001.JPG
Identifier (not shown on camera monitor)
Original still images (voice
Extension (indicates file format)
Still images
Movies
.JPG
memo attachment included)
and movies
DSCN
.MOV
.WAV
.MPO
Voice memos
3D images
Small copies (voice memo
attachment included)
SSCN
RSCN
Cropped copies (voice memo
attachment included)
File number (assigned automatically in
ascending order, starting with “0001”)
Images created by an image
editing function other than
small picture or crop* (voice
memo attachment included),
and movies created by the
movie editing function
FSCN
*
•
Files are saved in folders named with a folder number followed by “NIKON” (e.g.
“100NIKON”). When the number of files within a folder reaches 9999, a new folder will be
created. File numbers will be assigned automatically starting with “0001”.
Voice memo file names have the same identifier and file number as the image to which
the voice memo is attached.
Files copied using Copy>Selected images are copied to the current folder, where they
are assigned new file numbers in ascending order starting from the largest file number in
memory. Copy>All images copies all folders from the source medium; file names do not
change but new folder numbers are assigned in ascending order, starting from the largest
•
•
E111
•
A single folder can hold up to 200 images; if the current folder already contains 200
images, a new folder, named by adding one to the current folder name, will be created the
next time an image is captured. If the current folder is numbered 999 and contains 200
images, or an image is numbered 9999, no further images can be captured until the
E112
Optional Accessories
Battery Charger MH-66
(Charging time when no charge remains: Approx. 1 h 50 min)
Battery charger
AC Adapter EH-62G (connect as shown)
AC adapter
Be sure that the power connector cord has been properly aligned in
power connector and battery chamber grooves before closing the
battery-chamber/memory card slot cover. If part of the cord runs out of
the grooves, the cover or cord may be damaged when the cover is
closed.
E113
Error Messages
Display
O (flashes)
Cause/Solution
A
Clock not set.
Set date and time.
Battery exhausted.
Charge or replace battery.
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. After five seconds, this message will
disappear, the monitor will turn off, and the power-on
Battery temperature is
elevated.
The camera will turn off. lamp will flash quickly. After the lamp flashes for three
minutes, the camera will turn off automatically. Pressing
the power switch also turns off the camera.
Inside of the camera has become hot.
The camera will turn off
Turn off camera, and allow battery to cool down before
to prevent overheating.
–
resuming use.
Camera cannot focus.
Q (● flashes red)
•
•
Refocus.
Use focus lock.
Camera cannot perform other operations until saving is
complete.
Wait until message clears from display automatically
Please wait for the
camera to finish
recording.
–
–
when saving is complete.
Memory card is write
protected.
Write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.
E114
Display
Cause/Solution
A
Write-protect switch of Eye-Fi card is in “lock” position.
Slide the write-protect switch to “write” position.
–
Not available if Eye-Fi
card is locked.
Error accessing Eye-Fi card.
•
•
Check that terminals are clean.
Confirm that Eye-Fi card is correctly inserted.
This card cannot be used. Error accessing memory card.
•
•
•
Use approved card.
Check that terminals are clean.
Confirm that memory card is correctly inserted.
This card cannot be read.
Memory card has not been formatted for use in COOLPIX
S5200.
Card is not formatted.
Format card?
Yes
No
Formatting deletes all data saved on the memory card. If
you need to keep copies of any images, make sure to
select No and save the copies to a computer or other
medium before formatting the memory card. Select Yes
and press the kbutton to format the memory card.
Memory card is full.
•
•
•
•
Select smaller image size.
Delete images.
Insert new memory card.
Remove memory card and use internal memory.
Out of memory.
E115
Display
Cause/Solution
A
Error occurred while saving image.
Format internal memory or memory card.
Camera has run out of file numbers.
Insert a new memory card or format internal memory or
memory card.
Image cannot be used for welcome screen.
The following images cannot be registered as welcome
screen.
Image cannot be saved.
•
•
•
Images captured at an Image mode setting of
l 4608×2592
Images captured using Easy panorama and 3D
photography
Images reduced to 320 × 240 size or smaller with
cropping or small image editing
Insufficient space to save a copy.
Delete images from destination.
200 images have already been added to album.
Album is full. No further
pictures can be added.
•
•
Remove some images from album.
Add to other albums.
A voice memo cannot be attached to this file.
Sound file cannot be
saved.
•
•
Voice memos cannot be attached to movies.
Select an image captured with this camera.
–
One or more portrait subjects may have blinked when
the image was taken.
Check the image in playback mode.
A blink was detected in
the picture just taken.
Cannot edit selected image.
Image cannot be
modified.
•
•
Select images that support editing function.
Movies cannot be edited.
–
Time out error while saving movie on the memory card.
Select memory card with faster write speed.
Cannot record movie.
E116
Display
Cause/Solution
A
No images in the internal memory or memory card.
•
Remove the memory card from the camera to play
back images saved in the camera’s internal memory.
To copy the images saved in the camera’s internal
memory to the memory card, press the dbutton to
select Copy in the playback menu.
•
Memory contains no
images.
No images have been added to the selected album.
•
•
Add images to the album.
Select an album to which images are added.
No images are contained in the category selected in auto
sort mode.
Select the category containing the sorted images.
File contains no image
data.
File not created with this camera.
File cannot be viewed on this camera.
View file using a computer or the devices used to create
or edit this file.
–
This file cannot be played
back.
All images are hidden.
No images available for a slide show.
This image cannot be
deleted.
Image is protected.
Disable protection.
Travel destination is in
the current time zone.
Destination in same time zone as home.
–
E117
Display
Cause/Solution
A
Unable to create
panorama.
Could not shoot using easy panorama.
Shooting with easy panorama may not be possible in the
following situations.
Unable to create
panorama. Pan the
camera in one direction
only.
•
When shooting does not end after a certain amount of
time.
•
•
When the camera is moved too fast.
When the camera is not moved properly in the
panorama direction.
Unable to create
panorama. Pan the
camera more slowly.
When taking 3D images, the first shot could not be
successfully taken.
•
•
Try shooting again.
Shooting failed
In some shooting conditions, such as when the
subject is moving, dark, or low in contrast, shooting
may not be possible.
When taking 3D images, the second shot could not be
successfully taken after the first shot.
•
Try shooting again. After taking the first shot, move the
camera horizontally and frame the subject so that it is
aligned with the guide.
Failed to take second
shot
•
In some shooting conditions, such as when the
subject is moving, dark, or low in contrast, the second
shot may not be taken.
Failed to save the 3D images.
–
•
•
•
Try shooting again.
Delete unnecessary images.
Failed to save 3D image
3D images may not be created depending on the
shooting conditions, such as when the subject is
moving, dark, or low in contrast, and they cannot be
saved.
E118
Display
Cause/Solution
A
The memory card in the camera was removed while the
camera and the smart device were wirelessly connected.
The wireless connection has been aborted. Insert the
memory card and establish a connection again.
The memory card has
been removed. Wi-Fi is
now disabled.
Could not receive the communication signal from the
smart device. Set Wi-Fi network to On in Wi-Fi options
in the setup menu, and wirelessly connect the camera
and smart device again.
109,
No access
Failed to establish the connection while receiving the
communication signals from the smart device. Select a
different channel in Channel in Wi-Fi options in the
setup menu and establish the wireless connection again.
109,
Could not connect
An HDMI, USB or audio/video cable was connected to
the camera while the camera and smart device were
wirelessly connected, the battery level became low, or
the connection was aborted due to poor connectivity.
Disconnect the cable and establish the wireless
connection again.
Wi-Fi connection
terminated.
109,
Lens error.
Turn camera off and then on again. If error persists,
contact retailer or Nikon-authorized service
representative.
Lens error
Error occurred during communication with printer.
Turn camera off and reconnect USB cable.
Communications error
System error
Error has occurred in camera’s internal circuitry.
Turn camera off, remove and reinsert battery, and turn
camera on. If error persists, contact retailer or Nikon-
authorized service representative.
E119
Display
Cause/Solution
A
Printer error.
Printer error: check
printer status.
Check printer. After solving the problem, select Resume
and press the kbutton to resume printing.*
–
–
–
–
–
–
–
Specified size of paper is not loaded in printer.
Printer error: check paper Load the specified paper size, select Resume, and press
the kbutton to resume printing.*
Paper has jammed in printer.
Remove the jammed paper, select Resume, and press
the kbutton to resume printing.*
Printer error: paper jam
No paper is loaded in printer.
Printer error: out of paper Load the specified paper size, select Resume, and press
the kbutton to resume printing.*
Ink error.
Printer error: check ink
Printer error: out of ink
Check ink, select Resume, and press the kbutton to
resume printing.*
Running out of ink or ink cartridge is empty.
Replace ink cartridge, select Resume, and press the k
button to resume printing.*
An error occurred with the image file to be printed.
Printer error: file corrupt Select Cancel and press the kbutton to cancel
printing.
*
See the documentation provided with your printer for further guidance and information.
E120
Technical Notes and Index
The Camera.....................................................................................................................F2
The Battery......................................................................................................................F3
Charging AC Adapter..................................................................................................F4
Memory Cards................................................................................................................F5
Cleaning...........................................................................................................................F6
Storage .............................................................................................................................F6
Approved Memory Cards ....................................................................................... F22
Supported Standards............................................................................................... F23
F1
Maximizing Camera Life and Performance
The Camera
To ensure continued enjoyment of this Nikon product, observe the precautions described
device.
B Do Not Drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the Lens and All Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot, or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
B Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
B Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Keep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data saved on the memory card,
or affect the product’s internal circuitry.
F2
B Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the image sensor, producing a white
blur effect in photographs.
B Turn the Product off Before Removing or Disconnecting the Power Source
Do not remove the battery while the product is on, or while images are being saved or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
B Notes About the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99%
of pixels are effective, with no more than 0.01% being missing or defective. Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
The Battery
• Check the battery level before using the camera and replace or charge the battery if necessary. Do
not continue charging once the battery is fully charged as this will result in reduced battery
performance. Whenever possible, carry a fully charged spare battery when taking images on
important occasions.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C (104°F).
• Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F) before use.
• When charging the battery inserted into the COOLPIX S5200 using the Charging AC Adapter
EH-70P or a computer, the battery is not charged at battery temperatures below 0°C (32°F) or
above 45°C (113°F).
F3
• Note that the battery may become hot during use; wait for the battery to cool before charging.
Failure to observe these precautions could damage the battery, impair its performance, or prevent
it from charging normally.
• On cold days, the capacity of batteries tends to decrease. If an exhausted battery is used at a low
temperature, the camera will not turn on. Be sure that the battery is fully charged before heading
outside to take images in cold weather. Keep spare batteries in a warm place and exchange as
necessary. Once warmed, a cold battery may recover some of its charge.
• Dirt on the battery terminals can prevent the camera from functioning. Should the battery
terminals become dirty, wipe them off with a clean, dry cloth before use.
• If the battery will not be used for some time, insert it in the camera and completely exhaust it
before removing it for storage. The battery should be stored in a cool location with an ambient
temperature of 15°C to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold
locations.
• Always remove the battery from the camera or optional battery charger when it is not being used.
When inserted, minute amounts of current are drawn from the battery even when not in use. This
may result in excessive draining of the battery and complete loss of function. Turning the camera
on or off while the battery is exhausted can result in reduced battery life.
• Recharge the battery at least once every six months and completely exhaust it before returning it
to storage.
• After removing the battery from the camera or optional battery charger, put the battery in the
included battery case and store it in a cool place.
• A marked drop in the time a fully-charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new EN-EL19 battery.
• Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.
Charging AC Adapter
• The Charging AC Adapter EH-70P is for use only with compatible devices. Do not use with another
make or model of device.
• The EH-70P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other
countries, use a plug adapter (commercially available) as necessary. For more information about
plug adapters, consult your travel agency.
F4
• Do not, under any circumstances, use another make or model of AC adapter other than Charging
AC Adapter EH-70P or USB-AC adapter. Failure to observe this precaution could result in
overheating or in damage to the camera.
Memory Cards
memory cards.
• Observe the precautions noted in the documentation included with your memory card.
• Do not affix labels or stickers to the memory card.
• Do not format the memory card using a computer.
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera. We recommend formatting new memory cards with this camera
before using them with this camera.
• Note that formatting a memory card permanently deletes all images and other data on the
memory card. If there is data saved on the memory card that you wish to keep, copy that data to
a computer before formatting.
• If the message Card is not formatted. Format card? is displayed when the camera is turned on,
the memory card must be formatted. If there is data on the memory card that you do not want to
delete, select No and press the kbutton. Copy that data to a computer before formatting. To
format the memory card, select Yes.
• Observe the following precautions while formatting the memory card, saving and deleting
images, and copying images to a computer, otherwise data or the memory card itself may be
damaged.
- Do not open the battery-chamber/memory card slot cover or remove the memory card or
battery.
- Do not turn off the camera.
- Do not disconnect the AC adapter.
F5
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is pumped to
produce a stream of air out the other end). To remove fingerprints or other stains
that cannot be removed with a blower, wipe the lens with a soft cloth, using a spiral
Lens
motion that starts at the center of them and working toward the edges. If this fails,
clean the lens using a cloth lightly dampened with commercial lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other stains, clean the
Monitor
monitor with a soft, dry cloth, being careful not to apply pressure.
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry cloth.
After using the camera at the beach or other sandy or dusty environment, wipe off
Body
any sand, dust, or salt with a dry cloth lightly dampened with fresh water and dry
thoroughly. Note that foreign matter inside the camera could cause damage not
covered by the warranty.
Storage
Turn the camera off when not in use. Be sure that the power-on lamp is off before putting the
camera away. Remove the battery if the camera will not be used for an extended period. Do
not store the camera with naphtha or camphor moth balls, or in any of the following
locations:
•
Next to equipment that produces strong electromagnetic fields, such as televisions or
radios
•
•
Exposed to temperatures below –10°C (14°F) or above 50°C (122°F)
Places that are poorly ventilated or subject to humidity of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month. Turn the
camera on and release the shutter a few times before putting the camera away again.
F6
Troubleshooting
If the camera fails to function as expected, check the list of common problems below before
consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Problem
Cause/Solution
Wait for recording to end.
A
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert
the battery or batteries or, if you are using an AC
adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being recorded
will be lost, data that have already been recorded will
not be affected by removing or disconnecting the
power source.
The camera is on but does
not respond.
•
•
Confirm all connections.
Off is selected for Charge by computer in the
setup menu.
105,
•
•
•
When charging by connecting the camera to a
computer, battery charging stops if the camera is
turned off.
When charging by connecting the camera to a
computer, battery charging stops if the computer is
suspended (sleeping), and the camera may turn off.
Depending upon computer specifications, settings,
and status, charging the battery inserted in the
camera may not be possible via computer
connection.
Battery inserted in the
camera cannot be charged.
–
Camera cannot be turned
on.
Battery is exhausted.
F7
Problem
Cause/Solution
Battery is exhausted.
no operations are performed for an extended
period of time.
A
•
•
•
•
•
The camera or battery have become too cold and
cannot operate properly.
connected while the camera is on.
Camera turns off without
warning.
to a computer or printer is disconnected.
Reconnect the USB cable.
•
Inside of the camera has become hot. Leave the
camera off until the inside of the camera has
cooled, and then try turning it on again.
–
•
•
Camera is off.
Standby mode for saving power: press the power
switch, the shutter-release button, A button, c
button, or b(emovie-record) button.
When flash lamp flashes, wait until flash has
charged.
Camera and computer are connected via USB
cable.
•
•
•
Monitor is blank.
Camera and TV are connected via audio/video
cable or HDMI cable.
•
•
Adjust monitor brightness.
Monitor is dirty. Clean monitor.
Monitor is hard to read.
F8
Problem
Cause/Solution
A
•
•
If camera clock has not been set, “Date not set”
indicator flashes during shooting and movie
recording. Images and movies saved before clock is
set are dated “00/00/0000 00:00” or “01/01/2013
00:00” respectively. Set the correct time and date
from the Time zone and date option in the setup
menu.
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time of
the camera clock with that of a more accurate
timepiece and reset as required.
Date and time of recording
are not correct.
No indicators displayed in
monitor.
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Time zone and date has not been set in the setup
menu.
Print date not available.
Date not imprinted on
images even when Print
date is enabled.
•
The current shooting mode is one that does not
support Print date.
The date cannot be imprinted on movies.
•
Screen for setting time zone
and date is displayed when
camera is turned on.
Clock battery is exhausted; all settings were restored
to their default values.
Camera settings reset.
Battery temperature is high. Turn off camera and
allow battery to cool down before resuming use. After
the lamp flashes for three minutes, the camera will
turn off automatically. Pressing the power switch also
turns off the camera.
Monitor turns off, and the
power-on lamp flashes
quickly.
–
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
Camera becomes hot.
F9
Shooting Issues
Problem
Cause/Solution
A
•
•
Disconnect HDMI cable or USB cable.
Cannot switch to shooting
mode.
while connected to a power outlet via the
Charging AC Adapter.
•
When camera is in playback mode, press the A
button, the shutter-release button, or the b(e
movie-record) button.
No image captured when
the shutter-release button is
pressed.
•
•
•
When menus are displayed, press the dbutton.
Battery is exhausted.
When flash lamp flashes, flash is charging.
In some shooting conditions, such as when the
subject is moving, dark, or low in contrast, the second
shot may not be taken or the 3D image may not be
saved.
Cannot take 3D images.
Camera cannot focus.
–
•
Subject is too close. Try shooting using macro
mode, or the Scene auto selector or Close-up
scene mode.
•
does not perform well.
•
•
Set AF assist in the setup menu to Auto.
Turn camera off and then on again.
F10
Problem
Cause/Solution
A
•
•
•
•
Use flash.
Increase the ISO sensitivity value.
Enable vibration reduction or motion detection.
Use D (Best Shot Selector).
Images are blurred.
•
(using the self-timer at the same time is more
effective).
Bright specks appear in
images captured with flash.
Flash is reflecting off particles in air. Set the flash mode
setting to W (off).
•
•
The flash mode is set to W (off).
selected.
•
•
•
On is selected for Blink proof in smart portrait
menu.
timer in smart portrait menu.
Flash does not fire.
Another function that restricts flash is enabled.
Optical zoom cannot be
used.
•
•
Digital zoom is set to Off in the setup menu.
Digital zoom cannot be used in the following
situations.
-
When Scene auto selector, Portrait, Night
portrait, Night landscape, Backlighting
(when HDR is set to On), Easy panorama, Pet
portrait, or 3D photography is selected in
scene mode
Digital zoom cannot be
used.
-
-
When smart portrait mode is selected
to Multi-shot 16
-
menu is set to Subject tracking
F11
Problem
Cause/Solution
A
Another function that restricts the Image mode
option is enabled.
Image mode not available.
Off is selected for Sound settings > Shutter sound
in setup menu. No sound is produced with some
shooting modes and settings, even when On is
selected.
No sound when shutter is
released.
Off is selected for the AF assist option in the setup
menu. AF-assist illuminator may not light depending
on the position of the focus area or the current scene
mode, even when Auto is selected.
AF-assist illuminator does
not light.
Images appear smeared.
Colors are unnatural.
Lens is dirty. Clean lens.
White balance or hue is not adjusted properly.
The subject is dark, so shutter speed is too slow or ISO
sensitivity is too high. Noise can be reduced by:
Randomly spaced bright
pixels (“noise”) appear in
image.
•
Using flash.
Specifying a lower ISO sensitivity setting.
•
•
•
•
•
•
•
The flash mode is set to W (off).
Flash window is blocked.
Subject is beyond flash range.
Adjust exposure compensation.
Increase ISO sensitivity.
Images are too dark
(underexposed).
Subject is backlit. Select Backlighting scene mode or
set the flash mode setting to
X
(fill flash).
Images are too bright
(overexposed).
Adjust exposure compensation.
F12
Problem
Cause/Solution
A
When taking images with
V (auto with red-eye
reduction) or fill flash with slow sync and red-eye
reduction in Night portrait scene mode, In-Camera Red
Eye Fix may be applied to areas not affected by red-eye in
rare cases. Use any scene mode other than Night
portrait, and change the flash mode to any setting other
Unexpected results when
flash set to V (auto with
red-eye reduction).
than
V
(auto with red-eye reduction) and try taking an
image again.
•
•
not be softened.
the Skin softening effect in Glamour retouch in
the playback menu.
Skin tones are not softened.
It may take more time to save images in the following
situations.
•
•
•
When the noise reduction function is in operation,
such as when shooting in a dark environment.
eye reduction).
When shooting in Night landscape, Night
portrait, or Backlighting (when HDR is set to On)
scene mode
–
Saving images takes time.
•
•
When the skin softening function is applied while
shooting.
When using continuous shooting mode
When shooting with backlighting or when a very
strong light source (such as sunlight) is in the frame,
colored circles or light streaks (ghosting) may occur.
Change the position of the light source, or frame the
image so that the light source does not enter the
frame and try again.
Colored circles or light
streaks appear in the
monitor or images.
–
F13
Playback Issues
Problem
Cause/Solution
A
–
•
•
File or folder was overwritten or renamed by
computer or other make of camera.
The COOLPIX S5200 is not able to play back movies
recorded with another make or model of digital
camera.
File cannot be played back.
•
•
•
Playback zoom cannot be used with movies, small
pictures, or images that have been cropped to a
size of 320 × 240 or smaller.
connected via HDMI and they are played back in
3D.
The COOLPIX S5200 may not be able to zoom in on
images captured with another make or model of
digital camera.
–
Cannot zoom in on image.
–
•
•
Voice memos cannot be attached to movies.
Voice memos cannot be attached to images
captured with other cameras. Voice memos
attached to images using another camera cannot
be played back on this camera.
–
Cannot record voice
memos.
•
•
•
Editing functions used for still images are not
available for movies.
–
Cannot use quick retouch,
D-Lighting, glamour
retouch, small picture, or
crop.
images.
Camera is unable to edit images captured with
other cameras.
The COOLPIX S5200 cannot rotate images captured
with another make or model of digital camera, or
ones captured with 3D photography.
Cannot rotate image.
–
F14
Problem
Cause/Solution
A
•
•
settings setup menu.
Images are not displayed on
TV.
(Type D) and to the USB/audio/video output
connector simultaneously.
Memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
•
Album icons are reset to
their default icons, images
Data saved in the internal memory or on the memory
added to albums cannot be card may not be played back correctly if overwritten
–
displayed in favorite
pictures mode.
by a computer.
•
•
than the category currently displayed.
S5200 and images copied using the Copy option
cannot be displayed in auto sort mode.
The saved images are not
displayed in auto sort mode.
•
•
Images saved in the internal memory or on the
memory card may not be played back correctly if
overwritten by a computer.
to each category. If the desired category already
contains 999 images or movies in total, new images
or movies cannot be added.
–
F15
Problem
Cause/Solution
A
•
•
•
•
•
•
Camera is off.
Battery is exhausted.
–
USB cable is not correctly connected.
Camera is not recognized by the computer.
Confirm system requirements.
Computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
Nikon Transfer 2 does not
start when camera is
connected to a computer.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed and it
may be impossible to print images when Auto is
setup menu. Set the Charge by computer option to
Off and reconnect the camera to the printer.
The PictBridge startup
screen is not displayed
when the camera is
105,
connected to a printer.
•
•
•
Memory card contains no images. Replace the
memory card.
internal memory.
Images captured using 3D photography cannot
Images to be printed are not
displayed.
be printed.
Paper size cannot be selected from the camera in the
following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select paper size.
Cannot select paper size
with camera.
•
The printer does not support the paper sizes
specified by the camera.
–
•
The printer automatically selects the paper size.
F16
Specifications
Nikon COOLPIX S5200 Digital Camera
Type
Compact digital camera
Number of effective pixels
Image sensor
16.0 million
1/2.3-in. type CMOS; approx. 16.79 million total pixels
Lens
NIKKOR lens with 6× optical zoom
4.6-27.6 mm (angle of view equivalent to that of 26-156 mm lens in
35 mm [135] format)
Focal length
f/-number
f/3.5-6.5
Construction
5 elements in 5 groups
Digital zoom
magnification
Up to 4× (angle of view equivalent to that of approx. 624 mm lens
in 35mm [135] format)
Vibration reduction
Motion blur reduction
Autofocus (AF)
Lens shift
Motion detection (still pictures)
Contrast-detect AF
•
[W]: Approx. 50 cm (1 ft 8 in.)–∞,
[T]: Approx. 1 m (3 ft 4 in.)–∞
Focus range
•
Macro mode: Approx. 5 cm (2 in.)– (wide-angle position)
∞
(All distances measured from center of front surface of lens)
Face priority, manual with 99 focus areas, center, subject tracking,
target finding AF
Focus-area selection
Monitor
7.5 cm (3-in.), approx. 460k-dot, TFT LCD with anti-reflection coating
and 5-level brightness adjustment
Frame coverage
(shooting mode)
Approx. 99% horizontal and 99% vertical (compared to actual
picture)
Frame coverage
(playback mode)
Approx. 99% horizontal and 99% vertical (compared to actual
picture)
F17
Storage
Media
Internal memory (approx. 25 MB), SD/SDHC/SDXC memory card
DCF, Exif 2.3, DPOF, and MPF compliant
File system
Still pictures: JPEG
3D images: MPO
Sound files (Voice Memo): WAV
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio: AAC stereo)
File formats
•
•
•
•
•
•
•
16M (High) [4608 × 3456P]
16M [4608 × 3456]
8M [3264 × 2448]
4M [2272 × 1704]
2M [1600 × 1200]
VGA [640 × 480]
Image size
(pixels)
16:9 [4608 × 2592]
ISO sensitivity
(Standard output
sensitivity)
•
•
ISO 125-1600
ISO 3200 (available when using Auto mode)
Exposure
Matrix, center-weighted (digital zoom less than 2×), spot (digital
zoom 2× or more)
Metering mode
Programmed auto exposure and exposure compensation (–2.0 –
+2.0 EV in steps of 1/3 EV)
Exposure control
Shutter
Mechanical and CMOS electronic shutter
•
•
1/2000-1 s
1/4000 s (maximum speed during high-speed continuous
shooting)
Speed
•
4 s (Fireworks show scene mode)
Aperture
Range
Electronically-controlled ND filter (–3.3 AV) selection
2 steps (f/3.5 and f/11.5 [W])
Self-timer
Can be selected from 10 s and 2 s
F18
Flash
Range (approx.)
(ISO sensitivity: Auto)
[W]: 0.5–4.0 m (1 ft 8 in.–13 ft)
[T]: 1.0–2.0 m (3 ft 4 in.–6 ft 6 in.)
Flash control
TTL auto flash with monitor preflashes
Hi-Speed USB
Interface
Data transfer protocol
Video output
MTP, PTP
Can be selected from NTSC and PAL
Can be selected from Auto, 480p, 720p, and 1080i
HDMI output
Audio/video (A/V) output; digital I/O (USB)
HDMI micro connector (Type D) (HDMI output)
I/O terminal
Arabic, Bengali, Chinese (Simplified and Traditional), Czech, Danish,
Dutch, English, Finnish, French, German, Greek, Hindi, Hungarian,
Indonesian, Italian, Japanese, Korean, Marathi, Norwegian, Persian,
Polish, Portuguese (European and Brazilian), Romanian, Russian,
Spanish, Swedish, Tamil, Telugu, Thai, Turkish, Ukrainian,
Vietnamese
Supported languages
One Rechargeable Li-ion Battery EN-EL19 (included)
AC Adapter EH-62G (available separately)
Power sources
Charging time
Approx. 3 h (when using Charging AC Adapter EH-70P and when
no charge remains)
Battery life1
Still pictures
Approx. 160 shots when using EN-EL19
Approx. 25 min when using EN-EL19
1/4 (ISO 1222)
Movies (actual battery
life for recording)2
Tripod socket
Dimensions (W × H × D)
Weight
Approx. 97.7 × 58.4 × 21.3 mm (3.9 × 2.3 × 0.9 in.) (excluding
projections)
Approx. 146 g (5.2 oz) (including battery and SD memory card)
F19
Operating environment
Temperature
0°C–40°C (32°F–104°F)
Humidity
85% or less (no condensation)
Wi-Fi (Wireless LAN)
Standards
IEEE 802.11b/g/n (standard wireless LAN protocol)
IEEE 802.11b: DBPSK/DQPSK/CCK
IEEE 802.11g: OFDM
IEEE 802.11n: OFDM
Communications
protocols
Range (line of sight)
Operating frequency
Approx. 10 m (11 yd)
2412-2462 MHz (1-11 channels)
IEEE 802.11b: 5 Mbps
IEEE 802.11g: 20 Mbps
IEEE 802.11n: 20 Mbps
Data rates (actual
measured values)
Security
WPA2
Access protocols
Infrastructure
•
Unless otherwise stated, all figures assume a fully-charged battery and an ambient
temperature of 23 3°C (73.4 5.4°F) as specified by the Camera and Imaging Products
Association (CIPA).
1
Figures based on the Camera and Imaging Products Association (CIPA) standards for measuring
the endurance of camera batteries. Performance for still pictures measured under the following
test conditions: P 4608×3456 selected for Image mode, zoom adjusted with each shot, and
flash fired with every other shot. Movie recording time assumes that d 1080P/30p is
selected for Movie options. Figures may vary with use, the interval between shots, and the
length of time menus and images are displayed.
2
Individual movie files cannot exceed 4 GB in size or 29 minutes in length. Recording may end
before this limit is reached if camera temperature becomes elevated.
F20
Rechargeable Li-ion Battery EN-EL19
Type
Rechargeable lithium-ion battery
Rated capacity
Operating temperature
DC 3.7 V, 700 mAh
0°C–40°C (32°F–104°F)
Approx. 31.5 × 39.5 × 6 mm (1.3 × 1.6 × 0.3 in.) (excluding
projections)
Dimensions (W × H × D)
Weight
Approx. 14.5 g (0.5 oz) (excluding battery case)
Charging AC Adapter EH-70P
Rated input
AC 100-240 V, 50/60 Hz, 0.07-0.044 A
Rated output
DC 5.0 V, 550 mA
Operating temperature
0°C–40°C (32°F–104°F)
Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.2 in.) (excluding plug
adapter)
For Argentina: Approx. 55 × 59 × 63 mm (2.2 × 2.4 × 2.5 in.)
Dimensions (W × H × D)
Weight
For Korea: Approx. 55 × 59 × 66.5 mm (2.2 × 2.4 × 2.7 in.)
Approx. 47 g (1.7 oz) (excluding plug adapter)
For Argentina and Korea: Approx. 72 g (2.6 oz)
B Specifications
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change without notice.
F21
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved for use in
this camera.
•
Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording
movies. When using a memory card with a lower Speed Class rating, movie recording may
stop unexpectedly.
SDXC memory
SD memory card
SDHC memory card 2
card 3
64 GB, 128 GB
64 GB
SanDisk
TOSHIBA
Panasonic
Lexar
2 GB1
2 GB1
2 GB1
–
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
64 GB
64 GB, 128 GB
1
2
If the memory card will be used with a card reader or similar device, make sure that the device
supports 2 GB cards.
SDHC compliant.
If the memory card will be used with a card reader or similar device, make sure that the
device supports SDHC.
SDXC compliant.
3
If the memory card will be used with a card reader or similar device, make sure that the
device supports SDXC.
•
Contact the manufacturer for details on the above cards. We cannot guarantee camera
performance when using memory cards made by other manufacturers.
F22
Supported Standards
•
•
•
DCF: Design Rule for Camera File System is a standard widely used in the digital camera
industry to ensure compatibility among different makes of camera.
DPOF: Digital Print Order Format is an industry-wide standard that allows images to be
printed from print orders saved on memory cards.
Exif version 2.3: Exchangeable image file format (Exif) version 2.3 for digital still cameras is
a standard that allows information saved with photographs to be used for optimal color
reproduction when images are output from Exif-compliant printers.
PictBridge: A standard developed cooperatively by the digital camera and printer
industries, allowing photographs to be output directly to a printer without connecting the
camera to a computer.
•
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal and non-
commercial use of a consumer to (i) encode video in compliance with the AVC standard
(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was obtained from a video provider
licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
.
F23
Trademark Information
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the U.S.
and other countries. The iFrame logo and the iFrame symbol are trademarks of Apple
Inc.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance.
• Android and Google Play are trademarks or registered trademarks of Google, Inc.
• All other trade names mentioned in this manual or the other documentation provided
with your Nikon product are trademarks or registered trademarks of their respective
holders.
FreeType License (FreeType2)
• Portions of this software are copyright (c) 2013 The FreeType Project
(“www.freetype.org”). All rights reserved.
MIT License (Harfbuzz)
• Portions of this software are copyright (c) 2013 The Harfbuzz Project (“http://
www.freedesktop.org/wiki/Software/HarfBuzz”). All rights reserved.
F24
Battery level indicator..................................... 24
Battery-chamber/memory card slot cover
Best Shot Selector......................... 45, E46
BSS.......................................................... 45, E46
Button sound.............................................. E94
C
Compression ratio ................................... E40
Crop.................................................................. E24
D
Daylight.......................................................... E42
DPOF print.................................................... E36
DSCN............................................................... E111
E
EH-70P...................................................................... 16
Extension...................................................... E111
F
F26
File name...................................................... E111
Fill flash.................................................................... 58
Fixed range auto....................................... E49
Flash ................................................................... 3, 57
Flash lamp ...................................................... 5, 57
Focus area.............................................................. 30
Format memory cards
HDMI cable................................................... E26
HDMI device control.............................. E99
HDMI micro connector..................................... 3
HDR........................................................................... 46
I
Identifier........................................................ E111
Imprinting date and time.................... E88
Internal memory indicator
FSCN................................................................ E111
Full-frame playback ......................................... 32
G
H
J
JPG.................................................................... E111
L
Lens cover................................................................. 3
F27
M
Number of exposures remaining
O
Macro mode......................................................... 62
Memory capacity............................................... 24
Microphone............................................................. 3
MOV................................................................. E111
MPO................................................................. E111
Multi-shot 16............................................... E46
N
Optical zoom ....................................................... 29
P
Panorama Maker................................................ 90
Playback zoom.................................................... 80
Preset manual............................................. E43
Pre-shooting cache
F28
Print order date option
Q
R
Recording slow motion movies
Red-eye reduction............................................ 58
RSCN................................................................ E111
S
Sequence display options
Setup menu....................................................... 104
Shutter sound............................................. E94
Shutter speed....................................................... 31
Slow sync ............................................................... 58
Smart portrait mode........................................ 53
Speaker....................................................................... 5
Special effects mode........................................ 51
SSCN................................................................ E111
F29
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be made
without written authorization from NIKON CORPORATION.
YP3B03(11)
6MN10411-03
|
