Mercedes Universal
Adapter
Series 124, 129, 140, 170, 202, 208, 210, 220
USERS MANUAL
2006 © Chief Automotive Technologies, Inc.
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
3
9
Adapter Tube For
Universal Anchoring
System Stand *
4
2
5
6
7
8
UMS Anchoring
Stand *
1
(Rev. 9/98)
*
Not included with Mercedes Universal Adapter Package
Ref
Part No.
Qty.
Description
519060
010632
019095
090784
518171
532195
532196
519025
618302
620736
Mercedes Universal Adapter Package
Bolt, 1/2-13NC x 3, Gr. 8
Washer, 1/2 inch
Washer, 2 1/2 x 1 3/16 ID x 1/8
Mercedes Universal Adapter Base
Spacer, 1/8 inch
Spacer, 1/4 inch
Mercedes Pin Plate Adapter Assembly
Outer Support Pin
1
2
3
4
5
6
7
8
9
8
8
24
4
8
8
4
4
8
Nut, 1/2-13NC Gr. 8
1
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes 124 Series
1986-1989
3
9
4
7
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
1
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
Rev. 6/02
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base to the same side of clamp.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
2
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes Front 129 Series
3
9
4
2
5
6
7
8
3
9
4
1
2
5
6
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
7
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
Mercedes Rear 129 Series
(Rev. 9/98)
1
(refer to part numbers — page 1)
Application Instructions:
1. Remove conventional clamp jaws.
2. Install universal adapter base as shown above.
3. Install pin plate adapter with spacers on opposite side of clamp.
4. Install washers (090784) on adapter base as shown.
5. Insert outer support pin into pin plate adapter.
6. Lower vehicle onto universal adapter base while guiding pins into jack holes.
3
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes 140 Series
3
4
9
2
7
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
8
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
1
(Rev. 9/98)
(refer to part numbers — page 1)
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
4
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes Front 170 SLK Series
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
9
4
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
7
2
(refer to part numbers — page 1)
8
9
4
6
1
2
7
(Rev. 6/02)
8
1
Mercedes Rear 170 SLK Series
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT: Rocker panel jack tube hole is 20mm higher in the rear and will require three
1/4 inch spacers between stand and pin plate adapter.
3. Insert outer support pin into pin plate adapter.
4. Lower vehicle onto universal adapter base while guiding pins into jack holes.
5
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes 202 Series
3
4
9
2
7
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
8
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
1
(Rev. 9/98)
(refer to part numbers — page 1)
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
6
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes Front CLK 208 Series
3
4
9
7
2
3
4
9
8
6
2
1
7
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
8
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
1
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
(Rev. 9/98)
Mercedes Rear CLK 208 Series
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT: Insert 1/4 inch spacer between pin plate adapter and rear stand.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
7
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes 210 Series
3
9
4
6
7
2
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
1
(Rev. 6/02)
(refer to part numbers — page 1)
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT: Insert 1/4 inch spacer between pin plate adapter and stand.
3. Install five washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
8
MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
Mercedes 220 Series Front
S-Class Sedan
3
9
4
6
7
2
8
3
9
4
6
Requires 5/8”
Optional Spacer
1
2
(Rev.6/02)
8
7
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
Mercedes 220 Series Rear
S-Class Sedan
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
1
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT: Insert correct number of 1/4 inch spacers as shown. The front stand requires
two 1/4” spacers and the rear stand requires three 1/4” spacers plus a 5/8 inch
optional spacer.
3. Install four washers (090784) on adapter base as shown.
4. Insert outer support pin into pin plate adapter.
5. Lower vehicle onto universal adapter base while guiding pins into jack holes.
9
P.O. Box 1368
Grand Island, Nebraska 68802-1368
Phone 308-384-9747
Fax
308-384-8966
Chief reserves the right to alter product specifications
and/or package components without notice.
MUA (rev. 4/06)
Part No. 519035
|