QUAD-BLADE BLENDER
OWNER'S MANUAL
Model KB305H
120V~, 60Hz., 700 Watts
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1-800-798-7398
OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR QUAD-BLADE BLENDER
Helpful Hints
Maintenance
• Always operate the blender with the
blender cover on.
• Always hold the bender jar with one
hand while processing.
• To ensure proper blending and to
prevent overflow, add ingredients to the
blending jar a little at a time.
This blender requires no maintenance. It
contains no user-serviceable parts inside
the motor housing. Do not remove the
motor housing cover. Contact EURO-PRO
if this product needs servicing.
Cleaning
• Never fill blender jar more that 3/4 full -
the blade action will cause the
NEVER IMMERSE POWER BASE IN
WATER OR ANY OTHER LIQUID.
ingredients to rise in the blender jar.
Blend large quantities in several
batches.
• Unless your recipe says otherwise, pour
liquid ingredients first into the blender jar
before solid ingredients. The liquid will
help the processing go much faster and
allow the blender to operate at a more
efficient rate.
• Do not use blender continuously for an
extended amount of time, (no more than
four (4) minutes running time without
cooling down).
• Do not remove the blender jar from the
power base while the motor is running.
• To prevent the possibility of severe
injury or damage to the appliance,, keep
hands and utensils out of the blender jar
while processing. A scraper may be use
only when the blender is not working.
• Do not store food or beverages in the
blender jar.
1. Turn blender "Off".
2. Unplug blender from electrical outlet.
3. Remove the blender jar from the power
base.
4. Disassemble the blender jar and wash
in warm soapy water. Use extreme
caution when handling the blade
assembly.
5. Wipe the power base with a damp
cloth. Dry completely with a soft cloth.
Storage
Caution: Always assemble blender
parts correctly before storing the power
base.
1. Unplug and clean unit.
2. Wrap power cord counterclockwise
underneath the power base. (Fig. 5)
Note: Do not store the blender with the jar
cover in place.
• Even though the blender is a versatile
appliance, it will not mash potatoes,
beat egg whites, extract juice from fruits
or vegetables, grind raw meat or knead
dough.
• When grating hard cheese, cut into
small cubes and put small amounts into
the jar. Cover the jar and process on
high speed. Do not overload. Use the
pulse button and process until it reaches
the consistency that you desire.
• When processing solids, always cut
food into 1"-2" sized pieces before
blending.
6. Retainer Ring
7. Power Base
8. Pulse Button
9. On/Off - Progressive
Variable Speed Control Dial
1. Measuring Cap
2. Blender Jar Cover
3. Glass Blender Jar
4. Rubber Gasket
5. Blade Assembly
Fig. 5
• Use extreme caution when
processing hot foods to avoid
accidental scalding or burns. When
processing hot foods, always remove
the measuring cap from the blender
cover before beginning.
Technical Specifications
Voltage:
120V., 60Hz.
700 Watts
48 oz.
Power:
Jar Capacity:
5
2
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The Bravetti Blender is an indispensable kitchen tool for blending, chopping or
pureeing when preparing your favorite recipes. For best results, be sure to carefully read
all the instructions contained in this book before using this appliance.
Caution: When working with hot foods
or liquids, always remove the
How to Use Your Blender
Caution - Blades are sharp. Use
extreme caution when handling the
blade assembly, always hold it by the
base of the blade assembly. (Fig. 1) Do
not immerse the power base in water or
any other liquid.
measuring cap from the blender jar
cover to vent the steam. Keep hands
and other exposed skin away from the
opening to prevent possible burns or
scalding. Do not use more than two (2)
cups of hot liquid at a time.
700 Watt Power Unit
The 700 Watt Power Unit operates on
120V~, 60Hz. electrical power. Never
allow the power unit to become wet when
plugged into an electrical outlet.
Caution: Make sure that the power
unit is unplugged from power source
and the blades have stopped turning
before attaching or removing any
accessory.
Progressive Variable Speed Control
Warning: The power unit should never
be immersed in water.
The Bravetti Quad-Blade Blender is
equipped with a progressive variable
speed control. It gives the user the
ability to increase or decrease the
processing speed easily during use.
Fig. 1
Caution: Make sure that the power
unit is unplugged from power source
and the blades have stopped turning
before attaching or removing any
accessory.
Retainer Ring
Important: Do NOT operate the appliance
when empty.
Important: Do NOT operate the appliance
when empty as it could damage the power
base.
1. Place the power base on a dry, level
surface.
2. Make sure that the On/Off-Variable
Speed Control Dial is in the "OFF"
position.
Blade Assembly
decrease
Assembling the Blender
Caution - Blades are sharp. Use extreme
caution when handling the blade
assembly, always hold it by the base of
the blade assembly. (Fig. 1) NEVER
HANDLE BY BLADES, VERY SHARP. Do
not immerse the power base in water or
any other liquid.
3. Place the blender
jar into position on
Rubber Gasket
the power base.
(Fig. 4)
4. Plug the power
increase
cord into the
electrical outlet.
5. Add ingredients
to the blender jar
Note: Always turn appliance to the
"Off" position after use and
unplug the power base.
To remove the blender jar,
lift it straight up; there is no
need to twist it.
Glass Blender Jar Assembly
1. Place jar upside down on a flat level
surface. (Fig. 2)
2. Place the rubber gasket on the rim of
the blender jar. (Fig. 2)
3. Holding the blade assembly by the
base, place it carefully over the rubber
gasket. (Fig. 2)
4. Place the retainer ring over the base of
the blade assembly and screw on
tightly. (Fig. 2)
5. Before placing the assembled blender
jar on the power base, make sure that
the unit is not plugged in and that the
speed control dial is in the "OFF"
position. (Fig. 3)
as directed by your recipe.
6. Place the blender jar
cover on the blender
jar with the measuring
Blender Jar
Fig. 4
cap in place. Make
Due to differences in
sure that the measuring cap is securely
in place by turning it clockwise to lock.
Always hold the measuring cap firmly
in place during processing so that it
does not come loose.
amounts and desired
consistencies of some
processed foods, a higher or
lower speed may be
Fig. 2
required.
7. If you need to add additional
ingredients while the blender is
processing, just remove the measuring
cap and pour the ingredients in through
the opening in the blender jar cover.
8. Turn the variable speed control dial
clockwise until the desired speed is
reached. Speed may be varied during
processing.
9. After use, always turn the unit to the
"Off" position and unplug the power
cord from the electrical outlet before
removing the blender jar from the
power base.
Pulse Function
Use the Pulse function when you need
an extra burst of speed but only when
you are below the "MAX" (maximum)
speed level.
Fig. 3
You can use the Pulse function to
crush ice, but ice may also be crushed
at lower speeds as well. Crush only
about 8-10 oz. of ice at a time.
To clean the blender, fill the blender
with warm water and a drop of
dishwashing liquid and pulse a few
times and then remove the blender jar
from the power base and rinse the
blender jar.
CAUTION: NEVER REMOVE THE
BLENDER JAR FROM THE POWER
BASE WHILE THE BLENDER IS STILL
RUNNING.
3
4
|