Radio / Cassette
St. Louis C33
7 642 183 110
(FM/MW/LW/DMS)
Operating instructions
3
5
8
1
2
4
6
9
7
14
13
12
11 10
3
CONTROLS
1
button to release the control
panel
2
3
4
5
6
7
8
Button to switch the unit on/off
Volume control
Cassette eject
Cassette compartment
FR button, fast tape winding
FF button, fast tape winding
Arrow buttons
MENU button, to open the basic
settings menu
9
:
;
SOURCE button, to select the
CC, radio and CD changer
sources
AUDIO button, to adjust the
bass, treble, balance and fader
settings (Balance und Fader)
Short press: EQ button, to select
the sound presets
Long press: X-BASS, X-Bass
function
<
=
Keys 1 - 6
Short press: BAND button, to
select the FM memory bank
and the AM (MW/LW)
waveband, source selection to
radio mode
Long press: TS, to start the
Travelstore function.
>
button, to display the time
4
CONTENTS
CD changer mode.................. 12
Switching to CD changer mode..... 12
Selecting CDs............................... 12
Selecting tracks ............................ 12
Fast track selection ....................... 12
Fast searching (audible) ................ 12
Repeating individual tracks or
whole CDs (REPEAT).................... 12
Random track play (MIX) ............... 13
Scanning all tracks on all CDs
Notes and accessories ............ 6
Road safety ..................................... 6
Installation ....................................... 6
Accessories .................................... 6
Removable control panel ......... 7
Theft protection ............................... 7
Detaching the control panel ............. 7
Attaching the control panel .............. 7
Switching on/off ...................... 8
(SCAN) ......................................... 13
Pausing playback (PAUSE)............ 13
Adjusting the volume ............... 8
Setting the power-on volume ........... 8
Instantaneously reducing
the volume (mute) ............................ 8
Mute while telephoning .................... 9
Clock - Time ........................... 14
Displaying the time ........................ 14
Setting the clock ........................... 14
Selecting 12/24-hour clock mode .. 14
Displaying the time when the unit
Radio mode.............................. 9
Switching to radio mode .................. 9
Selecting the frequency band /
is off and the ignition is on ............. 14
memory bank................................... 9
Tuning into a station....................... 10
Setting the sensitivity of station
seek tuning.................................... 10
Storing station presets................... 10
Storing stations automatically
Sound and volume
distribution settings ............... 15
Adjusting the bass ......................... 15
Adjusting the treble ....................... 15
Adjusting the balance settings ....... 15
Adjusting the fader settings ........... 15
(Travelstore) .................................. 10
Listening to station presets ............ 10
Equalizer and X-BASS ........... 16
X-BASS ........................................ 16
Selecting preset sound effect ........ 16
Cassette mode....................... 11
Cassette playback ......................... 11
Switching over the playing
side of the tape ............................. 11
Fast tape winding .......................... 11
Cassette eject ............................... 11
Specifications ........................ 17
Amplifier........................................ 17
Tuner............................................. 17
CC................................................ 17
Installation instructions.......... 32
5
NOTES AND ACCESSORIES
Thank you for deciding to use a
Blaupunkt product. We hope you enjoy
using this new piece of equipment.
Installation
If you want to install your car radio by
yourself, please read the installation and
connection instructions that follow these
operating instructions.
Please read these operating instructions
before using the equipment for the first
time. The Blaupunkt editors are con-
stantly working on making the operat-
ing instructions clearer and easier to
understand. However, if you still have
Accessories
Only use accessories approved by
Blaupunkt.
any questions on how to operate the
equipment, please contact your dealer
or the telephone hotline for your coun-
try. You will find the hotline telephone
numbers printed at the back of this
booklet.
Amplifier
All Blaupunkt and Velocity amplifiers can
be used.
CD changer
The Blaupunkt CD changer CDC A 01
(7607 700 022) can be connected to the
St. Louis C33 unit.
Road safety
Road safety has absolute prior-
ity. Only operate your radio unit if the
road and traffic conditions allow you
to do so. Familiarize yourself with the
unit before setting off on your jour-
ney.
You should always be able to hear
police, fire and ambulance sirens
from far. For this reason, set the vol-
ume of the program you are listen-
ing to at a reasonable level.
6
REMOVABLE CONTROL PANEL
● First, pull the control panel straight
off the unit and then out towards
the left.
Removable control panel
Theft protection
As a way of protecting your equipment
against theft, the unit is equipped with
a detachable control panel (release
panel). Without this control panel, the
car radio is worthless to a thief.
● The unit switches off after the
control panel is removed.
● All current settings of the radio are
saved.
● CD already inserted in the unit
Protect your equipment against theft by
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.
remains there.
Attaching the control panel
● Slide the control panel from left to
right into the unit’s guide.
The control panel has been designed
to be easily use.
● Press the left-hand edge of the
control panel into the unit until it
clicks into place.
Note:
● Never drop the control panel.
● Never expose the control panel to
direct sunlight or other heat
sources.
● Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.
Note:
Detaching the control panel
● When attaching the control panel,
make sure you do not press on the
display.
1
If the unit was still switched on when
you removed the control panel, the unit
will automatically switch back on with
the last settings activated i.e. radio, CC
or CD changer when the panel is rein-
serted.
● Press the
button 1.
The control panel locking mechanism
opens.
7
SWITCHING ON/OFF
Switching on/off
ADJUSTING THE VOLUME
Adjusting the volume
There are various ways of switching the The system volume can be adjusted in
unit on/off:
steps from 0 (off) to 100 (maximum).
To increase the system volume,
● turn the volume control 3 clock-
wise.
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button 2, it will switch on/off
simultaneously with the ignition.
To decrease the volume,
● turn the volume control 3 anti-
clockwise.
Setting the power-on volume
You can set the unit’s default power-on
volume.
Switching on/off using the
removable control panel
● Remove the control panel.
The unit switches off.
● Press the MENU button 8.
● Keep pressing the or button
8 until “ON VOL” appears in the
display.
● Attach the control panel again.
The unit switches on. The last settings
i.e. radio, CC or CD changer will be re-
activated.
● Set the power-on volume using the
and buttons 8.
Switching on/off using button 2
To help you adjusting the volume more
easily, the volume will be increased /
decreased as you make your changes.
● To switch the unit on, press button
2.
The unit can only be switched on when
the ignition is turned on.
When you have finished making your
changes,
● To switch the unit off, press button
● press the MENU button 8 twice.
2 for longer than two seconds.
Instantaneously reducing the
volume (mute)
The unit switches off.
You can instantaneously reduce the
volume (mute) to a level preset by you.
● Briefly press button 2.
“MUTE” appears in the display.
8
ADJUSTING THE VOLUME
RADIO MODE
Setting the mute level
Radio mode
You can set the unit’s mute volume level.
● Press the MENU button 8.
Switching to radio mode
If you are in CC or CD changer mode,
● Keep pressing the or button
8 until “MUTE LVL” appears in
the display.
● keep pressing the SOURCE 9
button until the radio mode
appears in the display together with
the memory bank and frequency.
● Set the mute level using the and
buttons 8.
Selecting the frequency band /
memory bank
When you have finished making your
changes,
This unit can receive programs broad-
cast over the FM andAM (MW/LW) fre-
quency band. There are three preset
memory bank for the FM range and one
for the AM range. Six stations can be
stored on each memory bank.
● press the MENU button 8 twice.
Mute while telephoning
If your unit is connected to a mobile tele-
phone, the car radio’s volume will be
muted as soon as you “pick up” the tele-
phone. “TEL CALL” flashes in the dis-
play.
Selecting the FM memory bank
To switch between the FM memory bank
FM1, FM2 and FMT,
● press the BAND/TS button =.
This requires to the mobile telephone
be connected to the car radio as de-
scribed in the installation instructions.
Selecting the AM (MW/LW)
waveband
The volume will be reduced to the con-
figured mute volume level.
To select the AM (MW/LW) waveband,
● keep pressing the BAND/TS button
= until AM (MW/LW) appears in
the display.
9
RADIO MODE
Tuning into a station
There are various ways of tuning to a
station.
Storing station presets
Storing stations manually
● Select the required memory bank
(FM1, FM2 or FMT) or the AM
(MW/LW) waveband.
Automatic seek tuning
● Press the or button 8.
The unit tunes to the next receivable
station.
● Tune into the station.
● Press one of the station buttons
1-6 < for longer than one second
to store the station in that preset
memory.
Setting the sensitivity of station
seek tuning
You can choose whether to tune only
to strong reception stations or to also
tune to those with a weak reception.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT orAM (MW/LW) memory depend-
ing on the selected frequency band.
● Press the MENU button 8.
● Keep pressing the or button
8 until “SENS HI” or “SENS LO”
appears in the display
“SENS HI” means that the tuner is set
high to sensitivity. “SENS LO” means it Note:
is set to the low sensitivity setting. If ● Any stations that were previously
“SENS LO” is selected, “LOC” lights up
in the display.
stored on this memory bank are
deleted in the process.
● Set the required sensitivity using
● Press and hold the BAND/TS
the and buttons 8.
button = until seek tuning begins.
When you have finished making your The station storing procedure begins.
changes,
● press the MENU button 8.
Once the procedure finishes, all the
stored stations are played briefly.
Listening to station presets
Tuning into stations manually
You can also tune into stations manu-
ally.
● Select the memory bank on which
the station was stored.
● Press the or button 8.
● Press the preset station button 1-6
< of the station you want to listen
to.
10
CASSETTE MODE
Fast tape winding
Cassette mode
Fast-forwarding
Cassette playback
● To fast forward side A/1,
● If there is no cassette inserted in
the unit.
● press the FF tape-winding button
7 so that it clicks into position.
● Insert the cassette with its open
edge on the right and side A/1
facing up into the cassette com-
partment 5.
● To fast forward side B/2,
● press the FR tape-winding button
6 so that it clicks into position.
The side of the cassette that is facing
up is then played first of all (side A/1).
The cassette symbol appears in the
display.
“TAPE FF” appears in the display.
Fast-rewinding
● To fast rewind side A/1,
● If a cassette is already inserted in
● press the FR tape-winding button
the unit.
6 so that it clicks into position.
● Keep pressing the SOURCE
button 9 until “TAPE” appears in
the display.
● To fast rewind side B/2,
● press the FF tape-winding button
7 so that it clicks into position.
The cassette is played in the direction
that was last set.
“TAPE FR” appears in the display.
Stopping tape winding
Switching over the playing side
of the tape
● Press the fast tape-winding button
for the opposite direction.
● Press the tape-winding buttons
Playback is resumed.
FR 6 and FF 7 simultaneously.
Cassette eject
The tape playing direction changes.
● Press the button 4 to eject the
The direction of play is automatically
switched over when the end of the tape
is reached (autoreverse).
cassette from the unit.
11
CD CHANGER MODE
CD changer mode
Fast searching (audible)
To fast search backwards or forwards,
You can connect a CD changer (CDCA
01) to the St. Louis C33 unit. You can
obtain further information on available
CD changers from your dealer.
● keep one of the
buttons 8
pressed until fast searching
backwards / forwards begins.
Note:
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
● briefly press button 3 (RPT) <.
“S--RPT” appears briefly in the display.
● Information on handling CDs,
inserting CDs and operating the
CD changer can be found in the
operating instructions supplied with
your CD changer.
Switching to CD changer mode
To repeat the current CD,
● keep the 3 (RPT) button <
pressed for longer than two
seconds.
● Keep pressing the SOURCE 9
button until the display shows, for
instance, “CDC 1--1”.
“D--RPT” appears briefly in the display.
The first digit in this display represents
the CD number (in this case 1), and the
second digit represents the track num-
ber (in this case 1).
Deactivating REPEAT
To stop the current track or current CD
from being repeated,
● press button 3 (RPT) < until
“S--RPT” or “D--RPT” disappears
and the standard CD changer
display reappears.
Playback begins with the first CD that
the CD changer detects.
Selecting CDs
To move up or down to another CD,
● press the or button 8 once or
several times.
Selecting tracks
To move up or down to another track on
the current CD,
● press the or button 8 once or
several times.
12
CD CHANGER MODE
Scanning the first track on all CDs
Random track play (MIX)
You can briefly play the first track all CDs
in the CD changer.
To play the tracks on the current CD in
random order,
● briefly press button 4 (MIX) <.
“S--MIX” appears briefly in the display.
● keep the 2 (SCAN) button <
pressed for longer than two
seconds.
To play the tracks on all inserted CDs in
random order,
“D--SCAN” appears in the display.
● keep the 4 (MIX) button <
pressed for longer than two
seconds.
Stopping SCAN
To stop scanning,
● briefly press the 2 (SCAN) button
< again.
“D--MIX” appears briefly in the display.
Canceling MIX
The currently scanned track will then
continue to be played normally.
To stop the tracks from being played in
random order,
Note:
● press button 4 (MIX) < until
“S--MIX” or “D--MIX” disappears
and the standard CD changer
display reappears.
● You can set the scanning time
(scantime). For further details, read
the section entitled “Setting the
scantime” in the “CD mode”
chapter.
Scanning all tracks on all CDs
(SCAN)
Pausing playback (PAUSE)
● Press button 1 ( ) <.
“S--PAUSE” appears in the display.
Canceling pause
Scanning tracks on the current CD
To briefly play all the tracks on the cur-
rent CD in ascending order,
● press button 2 (SCAN) <.
“S--SCN” appears in the display.
● Press button 2 ( ) < while in
pause mode.
Playback is resumed.
13
CLOCK - TIME
Selecting 12/24-hour clock
mode
CLOCK - Time
Displaying the time
To display the time,
● Press the MENU button 8.
● Keep pressing the or button
8 until “24 H MODE” or “12 H
MODE” appears in the display.
● briefly press the button >.
Setting the clock
● Press the MENU button 8.
● Press the or button 8 to
switch between the modes.
● Keep pressing the or button
8 until “CLOCKSET” appears in
the display.
When you have finished making your
changes,
● press the MENU button 8.
● Press the button 8.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
Displaying the time when the
unit is off and the ignition is on
To display the clock when the unit is off
and the ignition is on,
● Adjust the minutes using the
/
buttons 8.
● press the MENU button 8 .
Once the minutes are set,
● press the button 8.
The hours flash on and off.
● Keep pressing the or button
8 until “CLOCK OFF” or “CLOCK
ON” appears in the display.
● Press the or button 8 to
● Adjust the hours using the
/
switch between the displays.
buttons 8.
When you have finished making your
changes,
When you have finished making your
changes,
● press the MENU button 8.
● press the MENU button 8 twice.
14
SOUND AND VOLUME
DISTRIBUTION SETTINGS
Adjusting the balance settings
To adjust the left/right volume distribu-
tion (balance),
Sound and volume
distribution settings
Adjusting the bass
To adjust the BASS,
● keep pressing the AUDIO :
button until “BAL” appears in the
display.
● press the AUDIO button :.
“BAS” appears in the display.
To move the volume distribution toward
the right,
To increase the bass,
● turn the volume control 3 clock-
wise.
● turn the volume control 3 clock-
wise.
To move the volume distribution toward
the left,
● turn the volume control 3 anti-
clockwise.
To decrease the bass,
● turn the volume control 3 anti-
clockwise.
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
Adjusting the treble
Adjusting the fader settings
To adjust the front/back volume distri-
bution (fader),
To adjust the TREBLE,
● keep pressing the AUDIO :
button until “TRE” appears in the
display.
● keep pressing the AUDIO :
button until “FAD” appears in the
display.
To increase the treble,
● turn the volume control 3 clock-
wise.
To move the volume distribution toward
the back,
To decrease the treble,
● turn the volume control 3 anti-
clockwise.
● turn the volume control 3 clock-
wise.
To move the volume distribution toward
the front,
● turn the volume control 3 anti-
clockwise.
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
15
EQUALIZER AND
X-BASS
SOUND AND VOLUME
DISTRIBUTION SETTINGS
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
Equalizer and X-BASS
X-BASS
The X-BASS feature can be used to
boost the bass at low volume levels.
To activate X-BASS,
● keep the EQ/X-BASS button ;
pressed until “XBASS ON” appears
in the display.
“X-BASS” appears in the display.
To deactivate X-BASS,
● keep the EQ/X-BASS button ;
pressed until “XBASS OFF”
appears in the display.
“X-BASS” disappears.
Selecting preset sound effect
You can select preset sound effect for
the following styles of music:
● CLASSIC
● POP M
● ROCK M
The settings for these music styles have
already been programmed.
To select one of the sound presets,
● keep pressing the EQ/X-BASS
button ; until the required setting
appears in the display.
If you want to deactivate the sound pre-
set,
● keep pressing the EQ/X-BASS
button ; until “DSP OFF” appears
in the display.
16
SPECIFICATIONS
Specifications
Amplifier
Output power:
4 x 15 watts sine
in accordance
with DIN 45 324
at 14.4 V 4 x 40
watts max. power
Tuner
Frequency ranges US:
FM:
87.5 - 108 MHz
AM (MW):
LW:
522 - 1620 kHz
144 - 288 kHz
FM mono sensitivity:
15 dBf
FM frequency response:
35 - 16.000 Hz
CC
Frequency response:
30 - 18.000 Hz
Subject to changes!
17
Service numbers / Numéros du service après-vente
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-4598830
02-369 62464
40 2085
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 210 94 27 337
(IRL) 01-4149400
(I)
02-369 62331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
02/04
CM/PSS 8 622 404 081
Radio / Cassette
St. Louis C33
7 642 183 110
(FM/MW/LW)
Operating instructions
Open here
2
3
5
8
1
2
4
6
9
7
14
13
12
11 10
3
CONTROLS
1
button to release the control
panel
2
3
4
5
6
7
8
Button to switch the unit on/off
Volume control
Cassette eject
Cassette compartment
FR button, fast tape winding
FF button, fast tape winding
Arrow buttons
MENU button, to open the basic
settings menu
9
:
SOURCE button, to select the
CC and radio sources
AUDIO button, to adjust the
bass, treble, balance and fader
settings (Balance und Fader)
;
Short press: EQ button, to select
the sound presets
Long press: X-BASS, X-Bass
function
<
=
Keys 1 - 6
Short press: BAND button, to
select the FM memory bank
and the AM (MW/LW)
waveband, source selection to
radio mode
Long press: TS, to start the
Travelstore function.
>
button, to display the time
4
CONTENTS
Sound and volume
Removable control panel ......... 7
Theft protection ............................... 7
Detaching the control panel ............. 7
Attaching the control panel .............. 7
distribution settings ............... 13
Adjusting the bass ......................... 13
Adjusting the treble ....................... 13
Adjusting the balance settings ....... 13
Adjusting the fader settings ........... 13
Switching on/off ...................... 8
Adjusting the volume ............... 8
Setting the power-on volume ........... 8
Instantaneously reducing the
volume (mute).................................. 8
Mute while telephoning .................... 9
Equalizer and X-BASS ........... 14
X-BASS ........................................ 14
Selecting preset sound effect ........ 14
Specifications ........................ 14
Amplifier........................................ 14
Tuner............................................. 14
CC................................................ 14
Radio mode.............................. 9
Switching to radio mode .................. 9
Selecting the frequency band /
memory bank................................... 9
Tuning into a station....................... 10
Setting the sensitivity of station seek
tuning ............................................ 10
Storing station presets................... 10
Storing stations automatically
(Travelstore) .................................. 10
Listening to station presets ............ 10
Cassette mode....................... 11
Cassette playback ......................... 11
Switching over the playing
side of the tape ............................. 11
Fast tape winding .......................... 11
Cassette eject ............................... 11
Clock - Time ........................... 12
Displaying the time ........................ 12
Setting the clock ........................... 12
Selecting 12/24-hour clock mode .. 12
Displaying the time when the unit
is off and the ignition is on ............. 12
5
NOTES AND ACCESSORIES
Thank you for deciding to use a
Blaupunkt product. We hope you enjoy
using this new piece of equipment.
Installation
If you want to install your car radio by
yourself, please read the installation and
connection instructions that follow these
operating instructions.
Please read these operating instructions
before using the equipment for the first
time. The Blaupunkt editors are con-
stantly working on making the operat-
ing instructions clearer and easier to
understand. However, if you still have
any questions on how to operate the
equipment, please contact your dealer
or the telephone hotline for your coun-
try. You will find the hotline telephone
Accessories
Only use accessories approved by
Blaupunkt.
Remote control
The St. Louis C33 unit cannot be
remotely controlled.
numbers printed at the back of this Amplifier
booklet.
All Blaupunkt and Velocity amplifiers can
be used.
Road safety
CD changer
Road safety has absolute prior-
No CD changer can be connected to
the St. Louis C33 unit.
ity. Only operate your radio unit if the
road and traffic conditions allow you
to do so. Familiarize yourself with the
unit before setting off on your jour-
ney.
You should always be able to hear
police, fire and ambulance sirens
from far. For this reason, set the vol-
ume of the program you are listen-
ing to at a reasonable level.
6
REMOVABLE CONTROL PANEL
● First, pull the control panel straight
off the unit and then out towards
the left.
Removable control panel
Theft protection
As a way of protecting your equipment
against theft, the unit is equipped with
a detachable control panel (release
panel). Without this control panel, the
car radio is worthless to a thief.
● The unit switches off after the
control panel is removed.
● All current settings of the radio are
saved.
● CD already inserted in the unit
Protect your equipment against theft by
taking the control panel with you every
time you leave your vehicle. Do not
leave the control panel in your vehicle -
not even in a hiding place.
remains there.
Attaching the control panel
● Slide the control panel from left to
right into the unit’s guide.
The control panel has been designed
to be easily use.
● Press the left-hand edge of the
control panel into the unit until it
clicks into place.
Note:
● Never drop the control panel.
● Never expose the control panel to
direct sunlight or other heat
sources.
● Avoid making direct skin contact
with the control panel’s contacts. If
necessary, clean the contacts with
a lint-free cloth and some alcohol.
Note:
Detaching the control panel
● When attaching the control panel,
make sure you do not press on the
display.
1
If the unit was still switched on when
you removed the control panel, the unit
will automatically switch back on with
the last settings activated i.e. radio or
CC when the panel is reinserted.
● Press the
button 1.
The control panel locking mechanism
opens.
7
SWITCHING ON/OFF
Switching on/off
ADJUSTING THE VOLUME
Adjusting the volume
There are various ways of switching the The system volume can be adjusted in
unit on/off:
steps from 0 (off) to 100 (maximum).
To increase the system volume,
● turn the volume control 3 clock-
wise.
Switching on/off using the vehicle
ignition
If the unit is correctly connected to the
vehicle’s ignition and it was not switched
off using button 2, it will switch on/off
simultaneously with the ignition.
To decrease the volume,
● turn the volume control 3 anti-
clockwise.
Setting the power-on volume
You can set the unit’s default power-on
volume.
Switching on/off using the
removable control panel
● Remove the control panel.
The unit switches off.
● Press the MENU button 8.
● Keep pressing the or button
8 until “ON VOL” appears in the
display.
● Attach the control panel again.
The unit switches on. The last settings
i.e. radio or CC will be reactivated.
● Set the power-on volume using the
Switching on/off using button 2
and buttons 8.
● To switch the unit on, press button
To help you adjusting the volume more
easily, the volume will be increased /
decreased as you make your changes.
2.
The unit can only be switched on when
the ignition is turned on.
When you have finished making your
changes,
● To switch the unit off, press button
2 for longer than two seconds.
● press the MENU button 8 twice.
The unit switches off.
Instantaneously reducing the
volume (mute)
You can instantaneously reduce the
volume (mute) to a level preset by you.
● Briefly press button 2.
“MUTE” appears in the display.
8
ADJUSTING THE VOLUME
RADIO MODE
Setting the mute level
Radio mode
You can set the unit’s mute volume level.
● Press the MENU button 8.
Switching to radio mode
If you are in CC mode,
● Keep pressing the or button
8 until “MUTE LVL” appears in
the display.
● keep pressing the SOURCE 9
button until the radio mode
appears in the display together with
the memory bank and frequency.
● Set the mute level using the and
buttons 8.
Selecting the frequency band /
memory bank
When you have finished making your
changes,
This unit can receive programs broad-
cast over the FM andAM (MW/LW) fre-
quency band. There are three preset
memory bank for the FM range and one
for the AM range. Six stations can be
stored on each memory bank.
● press the MENU button 8 twice.
Mute while telephoning
If your unit is connected to a mobile tele-
phone, the car radio’s volume will be
muted as soon as you “pick up” the tele-
phone. “TEL CALL” flashes in the dis-
play.
Selecting the FM memory bank
To switch between the FM memory bank
FM1, FM2 and FMT,
● press the BAND/TS button =.
This requires to the mobile telephone
be connected to the car radio as de-
scribed in the installation instructions.
Selecting the AM (MW/LW)
waveband
The volume will be reduced to the con-
figured mute volume level.
To select the AM (MW/LW) waveband,
● keep pressing the BAND/TS button
= until AM (MW/LW) appears in
the display.
9
RADIO MODE
Tuning into a station
There are various ways of tuning to a
station.
Storing station presets
Storing stations manually
● Select the required memory bank
(FM1, FM2 or FMT) or the AM
(MW/LW) waveband.
Automatic seek tuning
● Press the or button 8.
The unit tunes to the next receivable
station.
● Tune into the station.
● Press one of the station buttons
1-6 < for longer than one second
to store the station in that preset
memory.
Setting the sensitivity of station
seek tuning
You can choose whether to tune only
to strong reception stations or to also
tune to those with a weak reception.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT orAM (MW/LW) memory depend-
ing on the selected frequency band.
● Press the MENU button 8.
● Keep pressing the or button
8 until “SENS HI” or “SENS LO”
appears in the display
“SENS HI” means that the tuner is set
high to sensitivity. “SENS LO” means it Note:
is set to the low sensitivity setting. If ● Any stations that were previously
“SENS LO” is selected, “LOC” lights up
in the display.
stored on this memory bank are
deleted in the process.
● Set the required sensitivity using
● Press and hold the BAND/TS
the and buttons 8.
button = until seek tuning begins.
When you have finished making your The station storing procedure begins.
changes,
● press the MENU button 8.
Once the procedure finishes, all the
stored stations are played briefly.
Listening to station presets
Tuning into stations manually
You can also tune into stations manu-
ally.
● Select the memory bank on which
the station was stored.
● Press the or button 8.
● Press the preset station button 1-6
< of the station you want to listen
to.
10
CASSETTE MODE
Fast tape winding
Cassette mode
Fast-forwarding
Cassette playback
● To fast forward side A/1,
● If there is no cassette inserted in
the unit.
● press the FF tape-winding button
7 so that it clicks into position.
● Insert the cassette with its open
edge on the right and side A/1
facing up into the cassette com-
partment 5.
● To fast forward side B/2,
● press the FR tape-winding button
6 so that it clicks into position.
The side of the cassette that is facing
up is then played first of all (side A/1).
The cassette symbol appears in the
display.
“TAPE FF” appears in the display.
Fast-rewinding
● To fast rewind side A/1,
● If a cassette is already inserted in
● press the FR tape-winding button
the unit.
6 so that it clicks into position.
● Keep pressing the SOURCE
button 9 until “TAPE” appears in
the display.
● To fast rewind side B/2,
● press the FF tape-winding button
7 so that it clicks into position.
The cassette is played in the direction
that was last set.
“TAPE FR” appears in the display.
Stopping tape winding
Switching over the playing side
of the tape
● Press the fast tape-winding button
for the opposite direction.
● Press the tape-winding buttons
Playback is resumed.
FR 6 and FF 7 simultaneously.
Cassette eject
The tape playing direction changes.
● Press the button 4 to eject the
The direction of play is automatically
switched over when the end of the tape
is reached (autoreverse).
cassette from the unit.
11
CLOCK - TIME
CLOCK - Time
Selecting 12/24-hour clock
mode
Displaying the time
To display the time,
● Press the MENU button 8.
● Keep pressing the or button
8 until “24 H MODE” or “12 H
MODE” appears in the display.
● briefly press the button >.
Setting the clock
● Press the MENU button 8.
● Press the or button 8 to
switch between the modes.
● Keep pressing the or button
8 until “CLOCKSET” appears in
the display.
When you have finished making your
changes,
● press the MENU button 8.
● Press the button 8.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
Displaying the time when the
unit is off and the ignition is on
To display the clock when the unit is off
and the ignition is on,
● Adjust the minutes using the
/
buttons 8.
● press the MENU button 8 .
Once the minutes are set,
● press the button 8.
The hours flash on and off.
● Keep pressing the or button
8 until “CLOCK OFF” or “CLOCK
ON” appears in the display.
● Press the or button 8 to
● Adjust the hours using the
/
switch between the displays.
buttons 8.
When you have finished making your
changes,
When you have finished making your
changes,
● press the MENU button 8.
● press the MENU button 8 twice.
12
SOUND AND VOLUME DISTRIBUTION SETTINGS
Adjusting the balance settings
To adjust the left/right volume distribu-
tion (balance),
Sound and volume
distribution settings
Adjusting the bass
To adjust the BASS,
● keep pressing the AUDIO :
button until “BAL” appears in the
display.
● press the AUDIO button :.
“BAS” appears in the display.
To move the volume distribution toward
the right,
To increase the bass,
● turn the volume control 3 clock-
wise.
● turn the volume control 3 clock-
wise.
To move the volume distribution toward
the left,
To decrease the bass,
● turn the volume control 3 anti-
clockwise.
● turn the volume control 3 anti-
clockwise.
When you have finished making your
changes,
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
● wait 8 seconds, the settings are
saved and the audio source display
appears.
Adjusting the treble
Adjusting the fader settings
To adjust the TREBLE,
● keep pressing the AUDIO :
button until “TRE” appears in the
display.
To adjustthefront/backvolumedistribution
(fader),
● keep pressing the AUDIO :
button until “FAD” appears in the
display.
To increase the treble,
● turn the volume control 3 clock-
wise.
To move the volume distribution toward
the back,
● turn the volume control 3 clock-
To decrease the treble,
● turn the volume control 3 anti-
clockwise.
wise.
To move the volume distribution toward
the front,
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
● turn the volume control 3 anti-
clockwise.
When you have finished making your
changes,
● wait 8 seconds, the settings are
saved and the audio source display
appears.
13
EQUALIZER AND X-BASS
Equalizer and X-BASS
X-BASS
SPECIFICATIONS
Specifications
Amplifier
The X-BASS feature can be used to Output power:
boost the bass at low volume levels.
4 x 40 watts sine
in accordance
with DIN 45 324
at 14.4 V
4 x 50 watts max.
power
To activate X-BASS,
● keep the EQ/X-BASS button ;
pressed until “XBASS ON” appears
in the display.
Tuner
“X-BASS” appears in the display.
Frequency ranges:
FM:
AM (MW):
LW:
To deactivate X-BASS,
● keep the EQ/X-BASS button ;
87.5 - 108 MHz
522 - 1620 kHz
144 - 288 kHz
pressed until “XBASS OFF”
appears in the display.
“X-BASS” disappears.
FM mono sensitivity:
15 dBf
Selecting preset sound effect
You can select preset sound effect for
the following styles of music:
FM frequency response:
35 - 16.000 Hz
● CLASSIC
CC
● POP M
Frequency response:
● ROCK M
30 - 18.000 Hz
The settings for these music styles have
already been programmed.
To select one of the sound presets,
● keep pressing the EQ/X-BASS
button ; until the required setting
appears in the display.
If you want to deactivate the sound pre-
set,
● keep pressing the EQ/X-BASS
button ; until “DSP OFF” appears
in the display.
Subject to changes!
14
Service numbers / Numéros du service après-vente
Country:
Phone:
Fax:
WWW:
Germany
(D)
0180-5000225
05121-49 4002
Austria
(A)
(B)
01-610 390
02-525 5454
01-610 393 91
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
Belgium
Denmark
Finland
France
(DK) 44 898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 0030 210 57 85 350 0030 210 57 69 473
(IRL) 01-4149400
01-4598830
02-369 6464
40 2085
(I)
02-369 6331
40 4078
Luxembourg (L)
Netherlands (NL) 023-565 6348
023-565 6331
66-817 157
01-2185 11111
916-467952
08-7501810
01-8471650
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
01-2185 00144
902-120234
08-7501500
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0441
02-6130 0514
01-324 8756
022-8771260
Hungary
(H)
01-333 9575
Poland
(PL) 0800-118922
(TR) 0212-3350677
(USA) 800-2662528
Turkey
USA
0212-3460040
708-6817188
Brasil
(Mercosur)
(BR) +55-19 3745 2769 +55-19 3745 2773
Malaysia
(Asia Pacific) (MAL) +604-6382 474
+604-6413 640
Blaupunkt GmbH
09/03
CM/PSS 8 622 403 894
|