Radio / Cassette
Dakota RCR 127
Operating instructions
Contents
Quick reference ............................ 20
Changing the memory bank ................. 27 DSC programming ....................... 32
Storing stations ..................................... 27
Automatically storing the strongest
stations with Travelstore....................... 27
Recalling stored stations ...................... 28
Scanning stored stations with
Preset Scan .......................................... 28
Selecting the seek tuning sensitivity .... 28
Stereo - mono switching ....................... 28
Loudness .............................................. 28
Overview of DSC factory settings ........ 33
Important notes ............................ 23
Specifications............................... 33
Precautions ........................................... 23
Traffic safety ......................................... 23
Installation............................................. 23
Accessories .......................................... 23
Second KeyCard................................... 23
Blaupunkt telephone hotline ................. 34
KeyCard theft protection system 24
Putting the unit into operation .............. 24
Removing the KeyCard ........................ 24
“Training” a second KeyCard/
Receiving traffic programme
stations with RDS-EON................ 29
Replacing a KeyCard............................ 24
Displaying the radio pass data ............. 24
Short Additional Memory (S.A.M.)........ 25
Turn On Message (T.O.M.) .................. 25
Optical indication of anti-theft
Traffic announcement priority on/off .... 29
Beep tone ............................................. 29
Switching off the beep tone............... 29
Automatic seek tuning start
(tape operation) .................................... 29
Adjusting the volume for traffic
protection .............................................. 25
Care of your KeyCard ........................... 25
announcements and the beep tone...... 30
Selecting the audio source ......... 25
Cassette operation....................... 30
Inserting a tape ..................................... 30
Ejecting a tape ...................................... 30
Fast winding.......................................... 30
Reversing the tape ............................... 30
Listening to the radio during fast tape
Radio operation with RDS ........... 26
AF - Alternative frequency .................... 26
REG - regional programme .................. 26
Station tuning ........................................ 26
Automatic tuning
/
....................... 26
winding with RM (Radio Monitor) ......... 31
Care notes ............................................ 31
Manual tuning with << >>.................. 27
Scrolling through the broadcasting
networks................................................ 27
19
Quick reference
Switching on with the ignition being 3 TS/FM
1 On
Volume
Off
switched off:
Selector key to access the memory
To keep on operating the set when the
ignition is switched off (KeyCard is in-
serted), proceed as follows:
Turn the knob to switch the unit off,
wait for about 2 seconds and turn it on
again.
banks I, II and T.
To switch over:
Press TS/FM as many times as re-
quired.
When switching the set on with the
knob, the KeyCard has to be inserted.
The unit will play with the pre-
adjusted volume.
Travelstore
To avoid that the battery goes flat, the
system will be turned off automatically
after one hour of playback.
To store and recall the five most pow-
erful stations with Travelstore.
To store: Press button for approxi-
mately 1 sec. until you hear a beep
and “T-STORE” appears in the display.
To recall: Select the memory bank “T”
and press the corresponding preset
button (1-5) briefly.
Switching on/off with the KeyCard:
The set has to be turned on with the
knob.
2 SCA / SRC
SCA – Preset Scan
Press SCA/SRC for about 1 second -
The stations stored on the preset but-
tons will be scanned.
Notice:
Read the information in chapter “Key-
Card theft protection system”.
The indicators for the waveband, mem- 4 Cassette ejection
ory bank and preset button will flash in
Press
.
the display.
Switching on/off via the ignition:
When connected correspondingly, the
set can also be turned on and off with
the vehicle ignition.
After the ignition has been switched
off, a double beep tone will remind you
that you should remove the KeyCard
before leaving your vehicle.
5 Cassette loading slot
To stop Preset Scan:
Press SCA/SRC again for about 1 sec-
ond.
Insert the tape with side A or 1 facing
up, the open side showing to the right.
SRC (Source)
Press SRC/SRC briefly –
You can switch between radio and
cassette mode, if a cassette is insert-
ed.
20
6 Reversing the tape /
8 1, 2, 3, 4, 5 - preset buttons
You can store five stations for each of
the memory banks I, II and T.
To store a station: Press a preset
button during radio operation and hold
down until the set resumes play
(beep).
Flashing KeyCard tongue
Fast winding
When the radio is turned off and the
KeyCard removed, the KeyCard
tongue can be programmed to flash for
optical theft protection.
For more information see chapter
“DSC programming”.
Reversing the tape/fast winding
Press FR and FF buttons at a time.
TR1 or TR2 will be displayed.
To recall a station: Select the desired
memory bank and press the relevant
preset button briefly.
This flashlight can be switched off by
pushing in the tongue and lock.
“WRONG KC” will briefly appear on
the display and the set will switch off
automatically.
Fast winding
FR : fast rewind, press FF to stop
FF : fast forward, press FR to stop
9 KeyCard theft protection system
To operate the set it is necessary that
the KeyCard is inserted.
7 AF / TA
AF – Alternative frequency in RDS
mode:
When “AF” is displayed, the radio’s
RDS module is searching for a fre-
quency offering the same programme
in a better quality.
AF on/off: press button for about
1 second.
KeyCard
Inserting the KeyCard
With the KeyCard tongue sticking out
of the unit, introduce the KeyCard into
the slot with the contact area show-
ing up.
To remove the card, press first to un-
lock.
TA (Traffic Announcement = priority
for traffic stations)
If “TA” is displayed, the radio will play
traffic stations only.
Read also the information in chapter
“KeyCard theft protection system”.
Priority on/off: press button briefly.
21
: Display
; Rocker switch
< AUD
To adjust the treble, bass, balance and
fader.
a
If the display shows “TRE” or “BAS”,
you can adjust the reproduction of the
treble and bass frequencies with the
rocker switch. If “BAL” or “FAD” is dis-
played, you can set the balance (left/
right) and fader (front/rear).
c d e
f g h i
b
/
Station search
Up
Briefly press AUD as many times as
required and make the setting using
the rocker switch.
Down
a) NDR1 NDS - Station name
<</>> Up/Down in short intervals when AF
is off
b) TR 1
- Track (side) 1 of the cas-
sette
c) FM
d) I, II, T
- Waveband
- Memory bank I, II or
Travelstore
- Preset button (1-5)
- Alternative frequency for
RDS operation
- A traffic station is being
received
<</>> To scroll through the station net-
works when AF is on, e.g.NDR 1, 2,
3, 4, N-JOY, FFN, ANTENNE ... .
e) 5
f) AF
Extra rocker switch functions:
Further setting functions with
Treble + / Fader front
Treble – / Fader rear
g) TP
AUD
DSC Mode
<
<
h) TA
i) LD
- Priority for traffic stations
- Loudness on
Bass – / Balance left
Bass + / Balance right
Condition: The corresponding function
is activated.
The last setting will be stored automat-
ically.
To switch off AUD: Press button briefly
again.
If the setting remains unchanged with-
in 8 seconds, the display will switch
back to the previous condition.
22
Important notes
Extra function AUD
Installation
Precautions
Loudness - When listening at a low
level, the Loudness function creates a
more natural sound by boosting
the low frequency range.
Loudness on/off: Press AUD for ap-
proximately 1 sec.
“LD” lights up in the display if the
Loudness function is switched on.
Please refer to chapter “DSC program-
ming” for more information on how to
program the Loudness boost.
If you would like to install your new car ster-
eo yourself or add other audio components
to existing ones, then please read carefully
the enclosed instructions on installation and
connection.
In order to ensure that the set operates prop-
erly it is necessary that the positive power
supply line is connected to the ignition and
the permanent +12 V lead.
Before starting to use your new car radio,
please read the following information care-
fully.
Traffic safety
Traffic safety always has the highest priori-
ty.
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
radio in a way that could distract you.
Please keep in mind that you travel a dis-
tance of 14 m per second at a speed of only
50 km/h.
Should the traffic situation become particu-
larly demanding, we advise you not to use
the radio.
Always make sure that you are still able to
hear any warning signals coming from out-
side of the vehicle, such as police or fire
engine sirens, so that you can react accord-
ingly.
Therefore, you should always select a mod-
erate volume for playing your car radio while
you are driving.
Do not ground the loudspeaker outputs!
Accessories
= DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and prefer-
ences. See chapter “DSC program-
ming” for more information.
Use only the accessories and spare parts
approved by Blaupunkt.
Second KeyCard
You can also operate your car radio with a
second KeyCard.
Refer to chapter “KeyCard theft protection
system” for more information.
You can purchase a second KeyCard at any
specialised dealership.
23
KeyCard theft protection system
This piece of equipment is supplied with one The system will switch off after approximate-
KeyCard, though you can also operate the ly 10 seconds.
•
•
Push in the KeyCard. The card is re-
leased and put in the proper position
for being removed.
set with a second KeyCard.
When inserting another card type (e.g.
If you have lost your KeyCard or if it was phone or credit card), the display will show
damaged, you can buy a second / extra card “WRONG KC” for approximately 2 seconds.
Remove the first KeyCard and insert
the new one.
from your specialised dealer.
The set will switch off automatically.
After the display indication “READY” or
“LEARN KC”,
When using a second KeyCard, the settings Remove the wrong card and introduce the
stored on the first card will be adopted. How- correct KeyCard.
•
press DSC.
ever, you can individually store the follow-
ing functions:
•
Turn the knob to switch on the set.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used for
the set.
When trying to “train” a third one, the ac-
cess authorisation for the KeyCard not used
for the “training” process will be deleted au-
tomatically.
Bass, treble, balance and fader settings,
Loudness, TA (traffic announcement vol-
ume), beep volume, lo or dx.
Removing the KeyCard
Never pull out the KeyCard directly!
In addition, the settings activated before
switching the radio off, such as the station
tuned in, TA priority, AF and RM ON/OFF
will also remain stored.
This ensures that you will find your basic
settings re-adjusted automatically as soon
as you have inserted your KeyCard.
•
First, slightly push in the KeyCard.
This releases the card and puts it in the prop-
er position for being removed.
•
Now you can pull it out.
Displaying the radio pass data
“Training” a second KeyCard/
Replacing a KeyCard
Using the KeyCard supplied with your set
you can have the radio pass data such as
the model name, product number (7 6..) and
serial number indicated on the display pan-
el.
Putting the unit into operation
While operating the unit with the first Key-
Card, you can “train” a second one to be
also used with the set:
•
Turn on the set.
With the KeyCard tongue sticking out,
introduce the KeyCard into the slot
with the contact area showing up.
Please refer to chapter “DSC programming
- READ KC”.
•
•
•
Insert the first KeyCard and turn on the
set.
Press the DSC button and select
The car radio is now ready for operation.
If a wrong KeyCard is inserted, then “CARD
ERR” followed by “WAIT” will appear in the
display. In this case please do not make any
further adjustments.
“LEARN KC” with
/
.
Press << or >>.
The display will switch to “CHANGE”.
24
Selecting the audio source
Short Additional Memory
(S.A.M.)
Optical indication of anti-theft
protection
Using the SRC button you can switch be-
tween radio and tape operation.
Tape operation is only available if a cassette
is inserted.
Using the second KeyCard to be purchased Flashing KeyCard tongue
at any specialised dealership, you can pro-
When the vehicle is stationary and the Key-
To switch to another source,
gram a short text by selecting the DSC menu
item READ KC. This text will be moved
through the display and might be the tele-
phone number of a car repair service or the
emergency call number of your auto club.
Any specialised dealer with the proper
equipment can program the desired text with
up to a maximum of 162 characters onto the
KeyCard.
Card removed, the KeyCard tongue can be
switched to flash for extra anti-theft securi-
ty.
For this it is necessary that the positive pow-
er supply line and the permanent +12 V lead
are connected such as described in the in-
stallation instructions.
•
press SCA/SRC briefly.
Be sure that “LED ON” is adjusted in the
DSC mode.
If required, please refer to chapter “DSC
programming - LED”.
Turn On Message (T.O.M.)
Using the second KeyCard to be purchased
at any specialised dealership, you can pro-
gram the unit to display a selected “Turn On
Message” after the set is switched on.
Any specialised dealer with the proper
equipment can program the desired text with
up to a maximum of 48 characters onto the
KeyCard.
Switching off the flashlight
The flashlight can be switched off by push-
ing in the KeyCard and lock.
If you would like to deactivate the flashing
tongue with general effect, adjust the rele-
vant item in the DSC menu to “LED OFF”.
Each time you switch on your car radio us-
ing the second KeyCard, this text will ap-
pear in the display.
Care of your KeyCard
In order to ensure that the KeyCard always
functions correctly, it is important for the
contacts to be free from any foreign parti-
cles. Avoid direct skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab dipped in alcohol.
25
Radio operation with RDS (Radio Data System)
The Radio Data System offers you more If “SEARCH” appears in the display when You can select REG ON or REG OFF in the
convenience when listening to FM radio sta- switching on the radio or recalling one of the DSC menu. For more information, refer to
tions.
stored frequencies, the unit is automatically chapter “DSC programming - REG ON/
More and more radio stations have begun searching for an alternative frequency.
to broadcast RDS information alongside “SEARCH” will disappear from the display
OFF”.
their programmes.
when the alternative frequency has been
Station tuning
As soon as programmes have been identi- found or after the frequency band has been
fied, the station name including a regional run through completely.
Automatic tuning
/
identifier, if applicable, will appear in the dis- If the reception quality of the selected pro-
play, for example, NDR1 NDS (regional pro- gramme becomes too bad:
•
Press
cally search for the next station.
When keeping the upper or lower part
/
; the car radio will automati-
gramme in Lower Saxony, Germany).
When RDS is activated, the preset buttons
become programme buttons. You now know
exactly which programme you have tuned
into, making it easy to find the desired sta-
tion quickly.
•
Tune into another station.
/
of the rocker switch depressed, seek tuning
will speed up in upwards or downwards di-
rection.
REG - regional programme
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. The 1st programme broad-
cast by NDR, for example, offers pro-
grammes with different contents in the north-
ern states of Germany Schleswig-Holstein,
Hamburg and Lower Saxony at certain times
of the day.
If you have tuned to a regional programme,
you can select between REG ON and REG
OFF:
REG ON – the radio keeps tuned to the cur-
rent regional programme, even if the recep-
tion quality is getting poorer.
But RDS offers you further advantages:
AF - Alternative frequency
The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected programme is always
tuned in automatically.
This function is activated when “AF” appears
in the display.
Seek tuning
Up
Down
<< Down in short intervals (“AF” must be
switched off)
>> Up in short intervals (“AF” must be
switched off)
In order to switch this function on or off,
•
press AF/TA for about 1 second.
REG OFF – the radio automatically tunes
to the regional programme offering the best
reception quality (but maybe with local in-
formation for another service area).
While searching for the strongest reception
signal, the radio may switch to mute briefly.
26
Manual tuning with << >>
For this purpose, start automatic tuning, e.g.
using Travelstore:
•
Press and hold down the desired pre-
set button until the radio resumes play
after the muting (takes approximately 1
sec., confirmed by beep).
You can also tune in a station manually.
•
Press TS/FM for 1 sec.; the system
starts to run through the frequency
band. The display shows “T-STORE”.
Condition:
AF must be switched off (i.e. the symbol
does not light up in the display).
Now the station has been stored.
If “AF” does not light up,
press AF/TA for approximately 1 sec.
The activated preset button is indicated in
the display.
If necessary, deactivate AF:
•
•
Press AF/TA for about 1 second.
This fulfils the requirements for selecting
stations with << >>.
Notice:
Manual tuning:
Should you tune in a station which has al-
ready been stored before, then the corre-
sponding preset position will briefly flash in
the display.
•
Press << >>. The frequency will
change in short intervals in downwards
or upwards direction.
Changing the memory bank
You can shift between the memory banks I,
When holding the right or left part of the rock- II and T in order to store stations and recall
er switch depressed, the frequency scan is them later.
Automatically storing the
strongest stations with Travel-
store
The currently selected memory bank is in-
dicated in the display.
speeded up.
•
Press the TS/FM button as many times
until the desired memory bank lights
up in the display.
Scrolling through the broadcast-
ing networks
You can automatically store the five most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly conven-
ient on longer trips.
You can use the << >> buttons to tune in
stations of your reception area.
Storing stations
If several programmes of the broadcasting
networks can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...
For this it is necessary that the stations have
been tuned in at least once and that “AF” is
active (lights up in the display).
•
Press the TS/FM button for 1 sec.
On FM, you can store five stations on the
preset buttons 1, 2, 3, 4, 5 for each of the
memory banks I, II and T.
“T-STORE” will appear in the display.
The five strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion stored on preset 1.
•
•
Select the desired memory bank.
Tune in a station with the rocker switch
(either automatically or manually).
27
If desired, stations can also be stored man- Note:
ually on the Travelstore bank (see “Storing If “TA” shows on the display panel, the sys-
Loudness
Adjusts the low bass frequencies for a more
natural sound.
stations”).
tem will scan the stored traffic stations only.
Switching Loudness on/off:
Recalling stored stations
Selecting the seek tuning sensi-
tivity
•
Press the AUD button for approximate-
You can recall any stored station at the touch
of a button.
ly 1 sec.
You can alter the automatic seek tuning
sensitivity.
If “lo” is displayed, the radio will only pick up
strong, local stations.
If “lo” does not light up, the radio will also
pick up weaker, distant stations.
Should you wish to alter the seek tuning
sensitivity, refer to chapter “DSC program-
ming – LO/DX”.
When the Loudness function is active, “LD”
will light up in the display.
See chapter “DSC programming” for more
information.
•
•
Select the memory bank with TS/FM.
Press the corresponding preset button
briefly to recall the station.
Scanning stored stations with
Preset Scan
You can have all of the stored stations briefly
scanned.
Stereo - mono switching
To start Preset Scan:
•
Press SCA/SRC for approximately
1 sec. until “SCAN” appears in the dis-
play.
The radio will only play in stereo if the ster-
eo quality of the received station signal is
sufficient. When the signal strength gets
poor, the radio will gradually switch to mono.
You can select between stereo or mono
sound in the DSC menu.
All of the stored stations to be received in
the selected waveband will be scanned one
after the other. On FM, the radio will either
scan the stations stored on memory bank I
and II or T.
For more information, refer to chapter “DSC
programming – STEREO/MONO”.
Each time the radio is switched on, stereo
sound is activated automatically.
To select a scanned station and switch
off Preset Scan:
•
Press SCA/SRC for about 1 second.
28
Receiving traffic programme stations with RDS-EON
EON stands for Enhanced Other Networks, Traffic announcement priority
Switching off the beep tone
meaning the exchange of information with- on/off
a) Tune into another station offering traf-
fic information:
in a radio network.
If the priority for traffic announcement pro-
Many FM broadcasters offer traffic messag-
grammes is activated, “TA” will light up in
es for their service area at regular intervals.
the display.
•
•
Press the rocker switch or
press a preset button which has a
traffic programme station allocated
to it.
All traffic programme stations transmit a
special carrier signal alongside their pro-
To switch the priority on or off:
•
Press the AF/TA button.
grammes, which is decoded by your car ra-
dio. If this signal is identified, “TP” will ap- When pressing AF/TA while a message is
Alternatively:
pear in the display (Traffic Programme).
In addition to these, there are also stations
which do not actually transmit traffic pro- previous condition. The priority for all other
grammes themselves, but by using RDS- traffic messages remains active.
EON they offer the possibility to receive the
traffic messages broadcast by another traf- function while a traffic announcement is
fic programme station in the same radio broadcast.
network.
If you wish to have the priority for traffic an-
nouncements activated while listening to
being broadcast, this message will be inter-
rupted. The unit will then switch back to the
b) Switch off the priority for traffic an-
nouncements:
•
Press AF/TA.
“TA” will disappear from the dis-
play.
Please note that several buttons have no
Automatic seek tuning start
(tape operation)
Beep tone
When leaving the reception area of the tuned
in traffic programme station while listening
to a tape, the system will automatically start
searching for a new TA programme.
If no such station is found within approxi-
mately 30 seconds, you will hear a warning
beep every 30 seconds. To switch off the
beep tone proceed as described above.
If you leave the reception area of the traffic
programme station currently tuned into, you
will hear a beep tone approximately every
30 seconds.
This tone will also be released when press-
ing a preset button which has no traffic pro-
gramme allocated to it.
one of these stations (e.g. NDR3), “TA” must
appear on the display panel.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
traffic programme station (in this case,
NDR2) for the duration of the message and
return to the original programme (NDR3)
afterwards.
29
Cassette operation
Adjusting the volume for traffic
announcements and the beep
tone
To stop fast forward
press FR.
The car stereo has to be switched on.
•
The unit will automatically switch to tape
operation when inserting a cassette.
Fast rewind
Press FR (fast rewind).
This volume was preset at the factory,
though you can alter the value using the
DSC function (see “DSC programming – TA
VOL”).
You can also change the announcement and
beep volume for the current message only.
•
Inserting a tape
At the beginning of the tape the unit
will start playback automatically.
•
•
Turn on the set.
Insert a tape.
To stop fast rewind
Track A or 1 will be played.
•
press FF.
During cassette operation, “TR 1” or “TR 2”
(track) will appear in the display.
Decreasing the volume:
Fast winding
FR : fast rewind - press FF to stop.
FF : fast forward - press FR to stop.
•
Press AF/TA briefly.
The usual volume boost is now disabled and
you can alter the volume as desired. The
priority is deactivated for the current mes-
sage only.
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Increasing the volume:
Reversing the tape
•
Turn the knob 1
.
Press FR and FF buttons at a time.
TR1 or TR2 will appear in the display.
Ejecting a tape
•
Press
The cassette will eject.
.
Reversing the tape
To switch to the other side of the tape dur-
ing playback,
Fast winding
•
press FR and FF simultaneously.
At the end of the tape the unit will automat-
ically reverse to the other side (autoreverse).
The display shows “TR 1” for track (side) 1
or “TR 2” for track 2.
Fast forward
•
Press FF (fast forward).
At the end of the tape the unit will au-
tomatically reverse the direction and
start playing the other side.
30
Notice:
Care notes
If there is too much tension on the tape dur-
ing playback, the set may reverse the direc-
tion by itself before having reached the end
of the tape side. In this case check the con-
dition of the cassette tape. Sometimes it
helps to rewind it completely.
To avoid possible problems, we recommend
you to use C-60/C-90 type cassette tapes
only. Store your tapes in a cool place away
from dirt, dust and temperatures exceeding
50 °Celsius. Allow very cold tapes to warm
up before playing them in order to avoid
uneven tape transport. After approximately
100 hours of use, dust particles collected
on the playback head or roller may lead to
tape run problems and sound distortions.
Use a head cleaning tape to remove nor-
mal dirt build-up. For tougher cases, use a
cotton swab (Q-Tip) dipped in alcohol. Do
not attempt to clean by inserting a hard ob-
ject into the player!
Listening to the radio during fast
tape winding with RM (Radio
Monitor)
During fast winding of the tape, i.e. when
the radio is normally muted, you can use
the RM function to listen to the radio.
For more information please refer to chap-
ter “DSC programming – RM ON/OFF”.
31
DSC programming
REG ON/OFF REG ON – regional function
is switched on.
See chapter “Short Addition-
al Memory S.A.M.”.
DSC (Direct Software Control) allows you
to customise certain programmable, basic
settings to suit your personal needs and
preferences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to these if desired.
REG OFF – regional func-
tion is switched off.
Refer to “Radio operation
with RDS / REG - regional
programme”.
LEARN KC To “train” a second Key-
Card.
Please read the information
in chapter “KeyCard theft
protection system - Training
a second KeyCard”.
RM ON/OFF (Radio Monitor)
Allows you to listen to the
radio during fast winding of
the tape.
If you wish to alter any of the programming,
•
press SCA/SRC to select one of the
operating modes radio or cassette
(cassette must be inserted).
LED ON/OFF You can choose between
LED ON or LED OFF. With
LED ON, the KeyCard
RM ON – Radio playback
activated.
RM OFF – Function deacti-
vated.
tongue will flash for extra
anti-theft protection when
the unit has been switched
off and the KeyCard re-
moved.
•
press DSC.
Use the rocker switch to select and adjust
the functions described in the following. The
display will show you the adjusted condition.
READ KC
To read out the KeyCard
data.
The KeyCard supplied with
the radio is used to display
the model name, type
number (7 6..) and the serial
number.
Using the second KeyCard
to be purchased at any spe-
cialised dealership it is pos-
sible to display the Short
Additional Memory (S.A.M.)
data entered by the dealer.
BEEP
Acknowledgement tone for
all functions which require a
button to be pressed for
more than 1 second.
The volume can be adjusted
from between 0 to 9.
(0 = off)
/
Select function
<< >>
Adjust/recall value
32
Specifications
TA VOL
To adjust the traffic an-
nouncement and beep tone
volume from between 0 to
63.
The message will then come
through at this volume, if the
volume adjusted for the pro-
gram is lower.
If the program volume is
higher than the TA VOL lev-
el, the traffic report will be
played slightly louder.
LO/DX
To adjust the seek tuning
sensitivity for local or distant
stations.
Amplifier
Output power: 4 x 23 W RMS power
acc. to DIN 45324 at
14.4 V
LO - local stations
LO 1 - high sensitivity
LO 3 - normal sensitivity
4 x 35 W max. power
DX - distant stations
DX 1 - high sensitivity
DX 3 - normal sensitivity
Tuner
Wavebands:
FM
:
87.5 – 108 MHz
To quit the DSC programming mode
and store the adjustment:
FM sensitivity: 1.0 µV at 26 dB
signal-to-noise ratio
•
Press DSC.
LOUDNESS When listening at a low lev-
el, the Loudness function
creates a more natural
sound by boosting the low
frequency range.
The DSC programming mode will be auto-
matically quit 8 seconds after having made
the last adjustment.
FM frequency response:
35 - 16 000 Hz
Tape player
Overview of DSC factory set-
tings
LOUD 1 - Low boost
LOUD 6 - Max. boost
Frequency response:
40 - 15 000 Hz
REG
OFF
RM
OFF
STEREO/MONO
READ KC
LEARN KC
LED
-
-
You can select between
stereo or mono sound.
ON
BEEP
4
TA VOL
LOUDNESS
35
3
STEREO
1
DX
Subject to modifications!
33
Blaupunkt
telephone hotline
Address of the next service
centre in your vicinity
(only for Germany)
If you would like to know the address of
the next Blaupunkt service centre of
your area without having our service list
at hand:
-
-
Find out your area code.
Then call the following chargeable
phone number: 01 80 / 5 25 56 66.
-
Using the area code to be entered
you will be automatically given the
address and phone number of the
next Blaupunkt service centre. You
can also request this information
by fax.
34
Blaupunkt-Werke GmbH
Bosch Gruppe
2/97 Ts/Pf
K7/VKD 8 622 401 050
|