Radio CD MP3 WMA
Brighton MP27
Ravenna MP27
Rimini MP27
7 647 773 310
7 647 793 310
7 647 783 310
7 647 683 310
San Diego MP27
Bedienungsanleitung
Operating instructions
Mode d’emploi
Istruzioni d’uso
Gebruiksaanwijzing
Bruksanvisning
Instrucciones de manejo
Instruções de serviço
Betjeningsvejledning
Instrukcja obsługi
Návod k obsluze
Návod na obsluhu
Controls
; AUDIO button
1
button
Sets bass, treble, balance and fader.
Selects an equalizer presetting.
Switching X-BASS on/off and adjust-
ing it.
to remove the control panel (release
panel)
2 Button to switch the device on/off and
operate the volume mute feature.
< Keys 1 - 5
3 Volume control
4 CD tray
= TRAF button
Short press: Switches traffic informa-
tion standby on/off.
Long press: Switches convenient RDS
function on/off.
5 LCD display
6 Arrow buttons
7
button
> SRC/ button
to eject the CD from the device.
Short press: Switching sources be-
tween CD/MP3, CD changer (if con-
nected) and AUX.
8 ESC button
Confirm menu item and return to the
display of the MENU or AUDIO main
level.
Long press: Briefly displaying time.
? BND/TS button
9 DIS button
Short press: Selects the FM memory
banks and the MW and LW wavebands.
Long press: Starts the Travelstore
function.
Short press: Briefly displays alternative
display contents (e.g. time).
Long press: Changes display contents.
: MENU button (OK)
Short press: Calls up the menu for
settings.
Confirming the menu selection (OK).
Long press: Starts the Scan function.
30
Contents
About these instructions .................. 32 MP3/WMA mode ............................. 46
Preparing an MP3/WMA CD............. 46
Switching to MP3 mode .................. 47
Configuring the display ................... 47
Selecting a directory ...................... 48
Selecting Tracks/Files..................... 48
Fast search ................................... 48
Random track play (MIX)................. 48
Scanning tracks (SCAN).................. 48
Repeating individual tracks or
For your safety ................................ 33
Scope of delivery............................. 34
Detachable control panel ................. 34
Switching on/off.............................. 35
Adjusting the volume ....................... 36
Radio mode ..................................... 38
Adjusting the tuner......................... 38
Switching to radio mode ................. 38
Convenient RDS functions............... 38
Selecting the waveband/
whole directories (REPEAT)............. 49
Interrupting playback (PAUSE)......... 49
CD-changer mode ............................ 50
Switching to CD-changer mode........ 50
Selecting CDs................................ 50
Selecting tracks............................. 50
Fast searching (audible).................. 50
Configuring the display ................... 50
Repeating individual tracks or
whole CDs (REPEAT) ...................... 50
Random track play (MIX)................. 51
Scanning all tracks on all CDs (SCAN) .. 51
Interrupting playback (PAUSE)......... 51
memory bank................................ 39
Tuning into a station ....................... 39
Setting the sensitivity of station
seek tuning ................................... 39
Storing stations ............................. 40
Storing stations automatically
(Travelstore) ................................. 40
Listening to stored stations ............. 40
Scanning receivable stations (SCAN) .. 40
Setting the scanning time................ 40
Programme type (PTY) .................. 41
Optimising radio reception.............. 42
CLOCK time..................................... 52
Traffic information........................... 42
Sound ............................................. 53
Adjusting the bass ......................... 53
Adjusting the treble........................ 53
Setting the left/right volume
distribution (balance)..................... 53
Adjusting the front/rear volume
distribution (fader) ........................ 53
Equalizer presettings (Presets) ........ 54
X-BASS ........................................... 54
External audio sources..................... 55
Specifications ................................. 55
CD mode ......................................... 43
Switching to CD mode .................... 43
Selecting tracks............................. 44
Fast track selection ........................ 44
Fast searching (audible).................. 44
Random track play (MIX)................. 44
Scanning tracks (SCAN).................. 44
Repeating tracks (REPEAT) ............. 44
Interrupting playback (PAUSE)......... 45
Configuring the display .................. 45
Displaying CD text.......................... 45
Traffic announcements in CD mode .. 45
Ejecting a CD................................. 45
31
About these instructions
Use as directed
About these instructions
This device is intended for installation and
operation in a vehicle with 12 V vehicle sys-
tem voltage and must be installed in a DIN
slot. Observe the 'performance limits in the
technical data. Repairs and installation, if
necessary, should be performed by a spe-
cialist.
These instructions contain important infor-
mation to easily and safely install and oper-
ate the device.
•
Read these instructions carefully and
completely before using the device.
•
Keep the instructions at a location so
that they are always accessible to all
users.
Declaration of conformity
•
Always pass on the device to third par-
ties together with these instructions.
The Blaupunkt GmbH declares that this
car sound system complies with the basic
requirements and the other relevant regula-
tions of the directive 1999/5/EG.
In addition, observe the instructions of the
devices used in conjunction with this de-
vice.
Service
Symbols used
These instructions employ the following
symbols:
In some countries, Blaupunkt offers a repair
and pickup service.
information whether this service is avail-
able in your country.
If you want to use this service, you may re-
quest a pickup service for your device using
the Internet.
CAUTION!
Warns about laser beam
CAUTION!
Warns about damaging the CD
drive
Warranty
We provide
a
manufacturer's warranty
The CE mark confirms the compli-
ance with EU directives.
for products bought within the European
Union. For devices purchased outside the
European Union, the warranty terms issued
by our respective responsible domestic
agency are valid.
u
•
Identifies a sequencing step
Identifies a listing
The warranty terms can be called up under
from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
32
For your safety
After operation
For your safety
•
The device is worthless to a thief with-
out the control panel. Always remove
the control panel whenever you leave
the vehicle.
The device was manufactured according to
the state of the art and established safety
guidelines. Even so, dangers may occur if
you do not observe the safety notes in these
instructions:
•
Transport the control panel so that it is
protected against impacts and the con-
tacts cannot become dirty.
If you are installing device
yourself
You may only install the device yourself if
you are experienced in installing car sound
systems and are very familiar with the elec-
trical system of the vehicle. For this pur-
pose, observe the installation instructions
at the end of these instructions.
Cleaning notes
Solvents, cleaning and scouring agents as
well as dashboard spray and plastics care
product may contain ingredients that will
damage the surface of the device.
•
Use only a dry or slightly moistened
cloth for cleaning the device.
•
If necessary, clean the contacts of the
control panel regularly using a soft
cloth moistened with cleaning alcohol.
Observe the following!
Danger!
The device contains a Class 1 laser
that can cause injuries to your eyes.
Disposal of old unit
(EU countries only)
Do not open the device and do not perform
any modifications.
Do not dispose of your old device in
the household trash!
In operation
Use the return and collection sys-
tems available to dispose of the old device.
•
Operate the device only if traffic situa-
tion permits it! Stop at a suitable loca-
tion to perform more extensive opera-
tions.
•
•
Remove or attach the control panel only
while the vehicle is standing an.
Always listen at a moderate volume
so that you can hear acoustic warning
signals (e.g. police sirens) and protect
your hearing.Do not increase the vol-
ume when selecting a different audio
source or while the CD changer chang-
es the CD. The device is briefly muted.
33
Scope of delivery
Detachable control panel
Scope of delivery
Detachable control panel
The scope of delivery includes:
Theft protection
1
1
2
1
Car sound system
Support frame
The device is equipped with a detachable
control panel (flip-release panel) as a way
of protecting your equipment against theft.
The device is worthless to a thief without
this control panel.
Disassembly bar
Operating instructions
Protect your device against theft by taking
the control panel with you whenever you
leave your vehicle. Do not leave the control
panel inside your vehicle - not even in a hid-
ing place.
Optional equipment
(not part of the scope of delivery)
Use only accessories approved by
Blaupunkt.
The control panel has been designed to be
easy to use.
Remote control
Notes:
The steering wheel and/or handheld re-
mote control allows you to access the most
important functions of your car sound sys-
tem safely and conveniently.
• Never drop the control panel.
• Never expose the control panel to di-
rect sunlight or other heat sources.
You cannot switch the device on/off using
the remote control.
• Avoid direct skin contact with the
control panel’s electrical contacts. If
necessary, please clean the contacts
with a lint-free cloth moistened with
cleaning alcohol.
You can find out from your Blaupunkt dealer
which remote controls can be used with
your car sound system.
Detaching the control panel
Amplifiers
You can use all Blaupunkt and Velocity am-
plifiers.
1
CD changers
You can connect the following Blaupunkt
CD changers:
CDC A 03, CDC A 08 and IDC A 09.
u
Press the button 1.
The locking mechanism of the control panel
is unlocked.
u
Pull the control panel straight out of the
device and to the left.
34
Detachable control panel
Switching on/off
The device switches off.
Switching on/off
All the current settings are saved.
There are various ways of switching the de-
vice on/off:
Any CD already inserted in the device re-
mains there.
Switching on/off using the vehicle
ignition
Attaching the control panel
The device will switch on/off simultaneous-
ly with the ignition if the device is correctly
connected to the vehicle’s ignition and you
did not switch the device off by pressing
button 2.
u
Push the control panel into the guides
of the device from the left to the right.
u
Carefully push on the left side of the
control panel until it clicks into place.
Switching on/off using button 2
u
To switch on the device, press button
2.
u
To switch off the device, press and
hold down button 2 for longer than
two seconds.
Note:
The device switches off.
When attaching the control panel, make
sure you do not push on the display.
Note:
If the device was still switched on when you
detached the control panel, it will automati-
cally switch on with the last setting activat-
ed (radio, CD, CD changer or AUX) when
the panel is replaced.
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
Switching on with CD draw-in
If the device is switched off and no CD is in
the drive,
u
gently insert the CD with its printed
side uppermost into the drive 4 until
you feel some resistance.
The drive draws in the CD automatically.
You must not hinder or assist the drive as it
draws in the CD.
The device switches on and CD playback
starts.
35
Switching on/off
Note:
Adjusting the volume
Adjusting the volume
If the vehicle ignition was switched
You can adjust the volume in increments
from 0 (off) to 66 (maximum).
off prior to inserting the CD, you must
switch in on first with the button 2 to
start the playback.
To increase the volume,
u
press the + button 3.
To decrease the volume,
press the – button 3.
Switching the device on/off using the
detachable control panel
u
u
Detach the control panel.
The device switches off.
Attach the control panel again.
Setting the power-on volume
u
Note:
The device switches on. The last setting
(radio, CD, CD changer or AUX) is reacti-
vated.
The device features a time-out function
(time window).
For example, if you press the MENU
button : and select a menu item,
the device switches back after ap-
prox. 8 seconds after the last button
activation. The settings performed are
saved.
You can set the power-on volume.
u
u
Press the MENU button :.
Press the or button 6 repeat-
edly until "ON VOLUME" appears on the
display.
u
Adjust the power-on volume using the
buttons 6.
To help you adjust the setting more easily,
the device will increase or decrease the vol-
ume as you make your changes.
If you enable "LAST VOL", the volume which
was set the last time you switched off the
device is re-enabled.
36
Adjusting the volume
Note:
Switching the confirmation beep
on/off
The system will output a confirmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
To protect your hearing, the power-on
volume is limited to the value "38". If
the volume before switching off was
higher and the "LAST VOL" setting was
selected, the device switches on again
with the value "38".
When you have finished making your chang-
es,
u
u
Press the MENU button :.
u
press the MENU button : twice.
Press the or button 6repeatedly
until "BEEP ON" or "BEEP OFF" appears
on the display.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).
u
Switch the beep on or off using the
buttons 6.
When you have finished making your chang-
es,
u
Briefly press the button 2.
"MUTE" appears on the display.
u
press the MENU button :.
Cancelling mute
To return to your previously set volume
level,
Muting during telephone mode
If your device is connected to a cell phone,
the car sound system is muted when
you "pick up" the phone. For this purpose,
the cell phone must be connected to the
device as described in the installation
instructions.
u
briefly press the button 2 again.
Adjusting the mute level
You can adjust the mute level.
The display shows "PHONE".
u
u
Press the MENU button :.
Press the or button 6 repeat-
edly until "MUTE LVL" appears on the
display.
u
Adjust the mute level using the
buttons 6.
When you have finished making your
changes,
u
press the MENU button : twice.
37
Radio mode
Convenient RDS functions
Radio mode
This device is equipped with an RDS radio
receiver (Radio Data System). Many of the
receivable FM stations broadcast a signal
that not only carries the programme but
also additional information such as the sta-
tion name and programme type (PTY).
Adjusting the tuner
To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
among Europe (EUROPE), America (USA),
South America (S-AMERICA), and Thailand
(THAI). The tuner is factory-set to the re-
gion in which it was sold. If you experience
problems with your radio reception, please
check this setting.
The station name appears on the display as
soon as the tuner receives it.
The convenient RDS functions AF
(Alternative Frequency) and REGIONAL ex-
tend your radio’s range of functions.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting EUROPE.
•
AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
u
Switch off the device by pressing but-
ton 2.
•
REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
u
Hold the buttons 1 and 5 <pressed at
the same time and switch on the device
again with the button 2.
"TUNER" is displayed.
u
Select your tuner region with the or
button 6.
To save the setting,
Note:
u
switch the device off and on again or
wait approx. 8 seconds. The radio
starts playing with the last setting se-
lected (radio, CD, CD changer or AUX).
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions (AF
and REGIONAL),
Switching to radio mode
If you are in CD, CD changer or AUX mode,
u
press and hold down the TRAF = but-
ton for longer than two seconds.
u
or
press the BND/TS ? button
The RDS function is active if the RDS sym-
bol appears on the display.
u
press the SRC/ button > repeated-
ly until the memory bank, e.g. "FM1",
appears on the display.
A border appears around the radio symbol.
38
Radio mode
Switching REGIONAL on/off
Tuning into stations manually
u
u
Press the MENU button :.
You can also tune into stations manually.
Press the or button 6 repeated-
ly until "REG" appears on the display.
"OFF" or "ON" is displayed alongside
"REG".
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
u
Press the or button 6.
To switch REGIONAL on/off,
Browsing through broadcasting
networks (FM only)
If radio stations provide several pro-
grammes, you have the option of browsing
through these so-called "broadcasting net-
works".
u
u
press the or button 6.
Press the MENU button :.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Five stations can be stored in each memory
bank.
Note:
The RDS function must be activated be-
fore you can use this feature.
u
Press the or button 6 to switch
to the next station on the broadcasting
network.
Note:
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
u
briefly press the BND/TS ? button.
Tuning into a station
There are various ways of tuning into a sta-
tion.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Automatic station seek tuning
u
Press the or button 6.
The radio tunes into the next receivable sta-
tion.
u
u
Press the MENU button :.
Press the or button 6repeatedly
until "SENS" and the currently set value
appears on the display.
39
Radio mode
"SENS HI6" means that the tuner is set to The storing procedure begins. "FM TSTORE"
the highest sensitivity setting. "SENS LO1" appears on the display. After the process
means it is set to the lowest sensitivity set- has completed, the radio will play the sta-
ting.
Set the desired sensitivity level using
the buttons 6.
tion that is stored in memory location 1 of
the FMT memory bank.
u
Listening to stored stations
When you have finished making your chang-
es,
u
Select the memory bank or waveband.
u
Press the station button 1 - 5 < of the
desired station.
u
press the MENU button :.
Note:
You can set different sensitivity levels
for FM and MW or LW (AM).
Scanning receivable stations
(SCAN)
You can use the scan function to play all the
receivable stations briefly. You can set the
scanning time from 5 to 30 seconds in the
menu (in increments of 5 seconds).
Storing stations
Storing stations manually
u
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Starting SCAN
u
Press and hold down the MENU button
: for longer than two seconds.
u
u
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 5 < for longer than two
seconds to assign the station to that
button.
Scanning begins. "SCAN" appears briefly
on the display followed by a flashing display
of the current station name or frequency.
Cancelling SCAN and continuing
listening to a station
Storing stations automatically
(Travelstore)
u
Press the MENU button :.
You can automatically store the five sta-
tions offering the strongest reception in the
region (FM only). The stations are stored in
the FMT memory bank.
Scanning stops and the radio continues
playing the station that it tuned into last.
Setting the scanning time
Note:
u
Press the MENU button :.
Any stations that were previously
stored in this memory bank are deleted
in the process.
u
Press the or button 6 repeat-
edly until "SCAN TIME" appears on the
display.
u
Press and hold down the BND/TS ?
for longer than two seconds.
u
Set the desired scanning time using the
buttons 6.
40
Radio mode
When you have finished making your chang-
es,
the radio will automatically switch
from the currently tuned station or
from CD mode or CD-changer mode
to the station whose programme
type matches the one you selected.
u
press the MENU button : twice.
Note:
The defined scanning time is also ap-
plied by the system to scanning carried
out in CD and CD changer mode.
• If you do not want this PTY EON
switching, disable it in the menu
with "PTY off". First, press one of the
SRC/ > or BND/TS ? buttons.
Programme type (PTY)
Switching PTY on/off
Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they are
broadcasting. Your car radio can receive
and display this information.
u
u
Press the MENU button :.
Press the or button 6repeatedly
until "PTY ON" or "PTY OFF" appears on
the display.
For example, the programme types can be:
u
u
Press the or button 6 to switch
PTY ON or OFF.
CULTURE
SPORT
ROCK
TRAVEL
NEWS
MUSIC
JAZZ
POP
Press the MENU button :.
You can use the PTY function to select sta- Selecting the PTY language
tions of a particular programme type.
You can select the language for the display
of the programme types. Options include
"DEUTSCH", "ENGLISH" and "FRANÇAIS".
PTY-EON
If you specify the programme type and start
seek tuning, the radio will switch from the
current station to a station of the selected
programme type.
u
u
Press the MENU button :.
Press the or button 6 repeat-
edly until "PTY LANG" appears on the
display.
Notes:
u
Set the desired language using the
buttons 6.
• If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and "NO PTY" appears briefly on the
display. The radio will then retune to
the station that it received last.
When you have finished making your chang-
es,
u
press the MENU button : twice.
• If the tuned radio station or another
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in time,
41
Radio mode
Traffic information
Selecting a programme type and
starting seek tuning
Traffic information
Your device is equipped with an RDS-EON
receiver. EON stands for Enhanced Other
Network.
u
Press the or button 6.
The current programme type appears on
the display.
Whenever a traffic announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffic reports to the appropriate traffic in-
formation station within the broadcasting
network that does.
u
If you want to select another pro-
gramme type, you can do so by press-
ing the or button 6 whilst this
display is visible.
The selected programme type appears
briefly on the display.
Once the traffic report has been played, the
system will switch back to the programme
that you were listening to before.
u
Press the or button 6 to start
seek tuning.
The radio will then tune into the next station
that it finds that corresponds to your select-
ed programme type.
Switching traffic information
priority on/off
u
Briefly press the TRAF button =.
Optimising radio reception
The priority for traffic announcements is ac-
tivated if the display shows the traffic jam
symbol.
HICUT
The HICUT function improves reception
during poor radio reception (only FM). If
reception interferences are present, the in-
terference level is automatically reduced.
Notes:
You will hear a warning beep:
• If you leave the reception area of a
traffic information station that you
are currently listening to.
Switching HICUT on/off
• If you are receiving a traffic informa-
tion station and the volume is set
to minimum (0) or if you leave the
broadcast area of the set traffic in-
formation station while listening to
a CD, a CD changer or AUX and the
subsequent automatic seek tuning
does not find a new traffic informa-
tion station.
u
u
Press the MENU button :.
Press the or button 6repeatedly
until "HICUT" appears on the display.
u
Press the or button 6 to adjust
the HICUT setting.
"HICUT 0" means no automatic reduction of
the interference level, "HICUT 1" means au-
tomatic reduction of the interference level.
u
Press the MENU button :.
• If you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
42
Traffic information
CD mode
If you hear the warning beep, you can ei-
ther switch off traffic information priority
or tune into a station that broadcasts traffic
information.
CD mode
You can use this device to play standard
audio CDs, CD-Rs and CD-RWs with a dia-
meter of 12 or 8 cm.
Setting the volume for traffic
announcements
Caution!
Labelled or shaped CDs can dam-
age the CD drive.
u
Press the MENU button :.
u
Press the or button 6 repeat-
edly until "TA VOLUME" appears on the
display.
•
•
Do not insert any shape CDs.
Do not attach labels to CDs since the la-
bel may detach during operation.
u
Adjust the volume using the
tons 6.
but-
When you have finished making your chang-
es,
Note:
Label CDs only by using a marker since
it does not contain any caustic materi-
als. Permanent markers can damage
CDs.
u
press the MENU button : twice.
Notes:
• Using the volume control 3, you
can also adjust the volume during a
traffic announcement for the dura-
tion of that announcement.
To ensure proper functioning, use only CDs
with the Compact-Disc logo. Copy-pro-
tected CDs can cause playback problems.
Blaupunkt cannot guarantee the proper
functioning of copy-protected CDs!
• The volume distribution can be ad-
justed for traffic announcements.
For further information, please read
the "Sound" chapter.
Besides being able to play audio CDs on this
device, you can also play CDs containing
MP3/WMA music files. For further informa-
tion, please read the chapter entitled "MP3/
WMA mode".
Switching to CD mode
If there is no CD inserted in the drive,
u
gently insert the CD with its printed
side up into the CD tray 4 until you
feel some resistance.
The drive draws in the CD automatically.
You must not assist or hinder the drive as it
draws in the CD.
43
CD mode
The CD starts playing.
Random track play (MIX)
The display shows the CD symbol.
u
Press the 5 MIX button <.
Notes:
"MIX CD" appears briefly on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
• The CD symbol indicates that a CD is
located in the drive.
A border surrounding the CD symbol
indicates that CD is selected as au-
dio source.
Cancelling MIX
u
Press the 5 MIX button < again.
• If the vehicle ignition was switched
off prior to inserting the CD, you
must switch in on first with the but-
ton 2 to start the playback.
"MIX OFF" appears briefly on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
If a CD is already inserted in the drive,
u
press the SRC/ button > repeated-
ly until "CD" appears on the display.
u
Press and hold down the MENU button
: for longer than two seconds.
Playback begins from the point at which it
was last interrupted.
The next track will then be scanned.
Note:
Selecting tracks
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
u
Press one of the arrow buttons 6 to
select the next or previous track.
If you press the or button 6 once, the
player will play the current track again from
the beginning.
Cancelling SCAN and continuing
listening to a track
Fast track selection
To quickly select tracks backwards or for-
wards,
u
To stop scanning, press the MENU but-
ton :.
The currently scanned track will then con-
tinue to be played normally.
u
press and hold down one of the
buttons 6 until fast-reverse / fast-for-
ward track selection begins.
Repeating tracks (REPEAT)
If you want to repeat a track,
Fast searching (audible)
To fast search backwards or forwards,
u
press the 4 RPT button <.
"RPT TRCK" appears briefly on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
u
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
44
CD mode
Cancelling REPEAT
Switching CD text on/off
If you want to cancel the repeat function,
u
u
Press the MENU button :.
Press the or button 6repeatedly
until "CD TEXT" appears on the display.
u
press the 4 RPT button : again.
"RPT OFF" appears briefly on the display
and the RPT symbol disappears. Normal
playback is then resumed.
u
Switch the CD text function on ("TEXT
ON") or off ("TEXT OFF") using the or
button 6.
Interrupting playback (PAUSE)
When you have finished making your chang-
es,
u
Press the button 3 <.
u
press the MENU button : twice.
"PAUSE" appears on the display.
Cancelling pause
Traffic announcements in CD
mode
If you wish to receive traffic announcements
in CD mode,
u
During the pause, press the button 3
<.
Playback is continued.
u
press the TRAF button =.
Configuring the display
You can select from two display types for
CD mode:
The priority for traffic announcements is
activated if the display shows the traffic
jam symbol. For further information, please
read the chapter "Traffic information recep-
tion".
•
•
Track number and time
Track number and playing time
To change the display,
Ejecting a CD
u
Press and hold down the DIS button
9 for longer than 2 seconds.
u
Press the
CD compartment.
The CD is ejected.
button 7 next to the
Displaying CD text
Some CDs include CD text. The CD text
might contain the names of the artist, al-
bum and tracks.
u
Remove the CD.
Notes:
• If a CD is ejected, the drive will auto-
matically draw it back in again after
approx. 10 seconds.
You can allow the CD text to be displayed
as scrolling text every time you switch to
another track. The default display will ap-
pear again after the whole CD text has been
shown once. For further information, please
read the section entitled "Configuring the
display".
• You can also eject CDs whilst the
device is switched off or whilst an-
other audio source is activated.
45
MP3/WMA mode
MP3/WMA mode
D01
You can also use this car sound system to
play CD-Rs and CD-RWs that contain MP3
music files. You can also play WMA files.
The operation for playing MP3 and WMA
files is identical.
A
D02
D03
D04
Notes:
T001
T001
• WMA files with Digital Rights
Management (DRM) from online mu-
sic shops cannot be played with this
device.
T002
T003
T004
T005
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
B
T001
• WMA files can only be played back
safely if they were created with
Windows Media Player version 8.
T002
T003
T004
T005
T006
Preparing an MP3/WMA CD
The various combinations of CD burners,
CD burning software and CD blanks may
lead to problems arising with the device’s
ability to play certain CDs. If problems oc-
cur with your own burned CDs, you should
try another brand of CD blank or choose an-
other colour of CD blank.
A Directories
B
Title · Files
You can name each directory using a PC.
The device is capable of displaying the di-
rectory name. Name the directories and
tracks/files using your CD burner software.
The software’s instruction manual will pro-
vide details on how to do this.
The format of the CD must be ISO 9660
Level 1/Level 2 or Joliet. Other formats
cannot be played reliably.
Youcancreateamaximumof252directories
on a CD. You can use this device to access
all of these directories individually.
Note:
When naming directories and tracks/
files you should avoid using accents
and special characters.
Regardless of the number of directories on
the CD, the device can handle up to 511
MP3 files on a single CD, with a maximum
of 255 files in one directory.
If you like your files to be in the correct or-
der, you should use burner software that
places files in alphanumerical order. If your
software does not provide this feature you
also have the option of sorting the files
manually. For this purpose, you must en-
ter a number in front of each file name, e.g.
46
MP3/WMA mode
"001", "002", etc. The leading zeros must
also be entered.
Configuring the display
The following settings require that an MP3
CD is in the device.
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
Configuring the default display
You can display various types of informa-
tion on the current track:
When creating (encoding) MP3 files from
audio files, you should use bit rates up to a
maximum of 256 Kbit/sec.
•
Track number and playing time "TRCK-
TIME"
This device can only play MP3 files that
have the ".MP3" file extension.
•
•
Track number and time "TRCK-CLK"
Directory number and track number
"DIR-TRCK"
Notes:
To ensure uninterrupted playback,
•
•
Directory number and time "DIR-CLK"
• do not try changing the file extension
to ".MP3" of any files other than MP3
files and then attempt to play them!
The device will ignore these invalid
files during playback.
Directory number and playing time
"DIR-TIME"
Note:
After the MP3 scrolling text was
scrolled once after a track change, the
information is permanently shown on
the display.
• Do not use "mixed" CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 files dur-
ing MP3 playback).
To switch between the different display
options,
• Do not use mix-mode CDs contain-
ing both CD-audio tracks and MP3
tracks. If you try playing a mix-mode
CD, the device will only play the CD-
audio tracks.
u
press and hold down the DIS button
9 for longer than 2 seconds.
u
For an additional selection, press and
hold down the DIS button 9for longer
than 2 seconds.
Switching to MP3 mode
Configuring the MP3 scrolling texts
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
One of the following scrolling texts is
shown once on the display with every track
change. Afterwards, the configured stand-
ard display is shown.
The available scrolling texts are:
•
•
Directory name ("DIR NAME")
Name of the track ("SONG NAME")
47
MP3/WMA mode
•
•
•
Name of the album ("ALBM NAME")
Fast search
To fast search backwards or forwards,
Name of the artist ("ARTIST")
File name ("FILE NAME")
u
press and hold down the or button
6until fast searching backwards / for-
wards begins.
Note:
Artist, track and album name are part
of the MP3-ID tag of version 1 and can
only be displayed if they have been
saved with the MP3 files (for further in-
formation, please read the instructions
that came with your PC’s MP3 software
or burner software).
Random track play (MIX)
To play the tracks in the current directory in
random order,
u
briefly press the 5 MIX button <.
"MIX DIR" appears on the display and the
MIX symbol lights up.
To switch between the different display op-
tions,
To play all the tracks contained on the in-
serted MP3 CD in random order,
u
u
press the MENU button :.
Press the or button 6 repeat-
edly until "MP3 DISP" appears on the
display.
u
press and hold down the 5 MIX button
< for longer than two seconds.
"MIX CD" appears on the display and the
MIX symbol lights up.
u
Select the desired MP3 scrolling text
with the or button 6.
Cancelling MIX
To cancel MIX,
When you have finished making your changes,
press the MENU button : twice.
u
u
briefly press the 5 MIX button <.
Selecting a directory
To move up or down to another directory,
"MIX OFF" appears on the display and the
MIX symbol disappears.
u
press the or button 6 once or
several times.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on
the CD.
Selecting Tracks/Files
to move up or down to another track/file
in the current directory,
u
Press and hold down the MENU button
: for longer than two seconds. The
next track will then be scanned.
u
press the or button 6 once or
several times.
"TRK SCAN" appears on the display next to
the flashing track numbers. The titles of the
CD are scanned in ascending order.
If you press the button 6 once, the cur-
rent track will be played again from the be-
ginning.
48
MP3/WMA mode
Note:
Interrupting playback (PAUSE)
You can set the scanning time. For fur-
ther information on setting the scan-
ning time, please read the section en-
titled "Setting the scanning time" in the
"Radio mode" chapter.
u
Press the button 3 <.
"PAUSE" appears on the display.
Cancelling pause
u
During the pause, press the button
<.
Playback is continued.
3
Cancelling SCAN and continuing
listening to a track
u
Briefly press the MENU button :.
The currently scanned track will then con-
tinue to be played normally.
Repeating individual tracks or
whole directories (REPEAT)
To play the current track repeatedly,
u
briefly press the 4 RPT button <.
"RPT TRCK" appears briefly on the display
and RPT lights up.
To repeat the whole directory,
u
press and hold down the 4 RPT button
< for longer than two seconds.
"RPT DIR" appears briefly on the display.
Cancelling REPEAT
To stop the current track or current direc-
tory from being repeated,
u
briefly press the 4 RPT button <.
"RPT OFF" appears briefly on the display
and RPT disappears.
49
CD-changer mode
Configuring the display
Five options are available for the display in
CD changer mode:
CD-changer mode
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
•
Track number and playing time ("TRCK-
TIME")
•
•
Track number and time ("TRCK-CLK")
CD number and track number ("CD-
TRCK")
Switching to CD-changer mode
u
Press the SRC/ button > repeat-
edly until "CHANGER" appears on the
display.
•
•
CD number and time ("CD-CLK")
CD number and playing time ("CD-
TIME")
A border appears around the CD changer
symbol.
u
u
Press and hold down the DIS button
9 for longer than 2 seconds.
The device starts playing the first CD that
the CD changer detects.
For an additional selection, press and
hold down the DIS button 9for longer
than 2 seconds.
Selecting CDs
To move up or down to another CD,
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
u
press the or button 6 once or
several times.
u
briefly press the 4 RPT button <.
Note:
"RPT TRCK" appears briefly and RPT lights
up on the display.
The device will ignore empty CD slots
in the changer and slots containing
invalid CDs.
To repeat the current CD,
u
press and hold down the 4 RPT button
Selecting tracks
To move up or down to another track on
the current CD,
< for longer than two seconds.
"RPT DISC" appears briefly and RPT lights
up on the display.
u
press the or button 6 once or
several times.
Cancelling REPEAT
To stop the current track or current CD from
being repeated,
Fast searching (audible)
To fast search backwards or forwards,
u
briefly press the 4 RPT button <.
u
press and hold down one of the
buttons 6 until fast searching back-
wards / forwards begins.
"RPT OFF" appears and RPT disappears on
the display.
50
CD-changer mode
Note:
Random track play (MIX)
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
To play the tracks on the current CD in
random order,
u
briefly press the 5 MIX button <.
"MIX CD" appears briefly and MIX lights up
on the display.
Interrupting playback (PAUSE)
Press the button 3 <.
"PAUSE" appears on the display.
To play the tracks on all inserted CDs in
random order,
u
u
press and hold down the 5 MIX button
< for longer than two seconds.
Cancelling pause
"MIX ALL" appears briefly and MIX lights up
on the display.
u
During the pause, press the button
<.
Playback is continued.
3
Cancelling MIX
u
Briefly press the 5 MIX button <.
"MIX OFF" appears and MIX on the display
disappears.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on all the
inserted CDs in ascending order,
u
press and hold down the MENU button
: for longer than two seconds.
"TRK SCAN" appears on the display and the
number of the current track flashes.
Stopping SCAN
To stop scanning,
u
briefly press the MENU button :.
The currently scanned track will then con-
tinue to be played normally.
51
CLOCK time
When you have finished making your chang-
es,
CLOCK time
u
press the MENU button :.
Displaying the time
To briefly display the time,
Displaying the time continuously
when the device is off and the
ignition is on
u
press and hold the SRC/ button >
until the time appears on the display.
To display the time when the device is off
and the vehicle ignition is on,
Setting the time
To set the time,
u
press the MENU button :.
u
u
press the MENU button :.
The display shows "MENU".
Press the or button 6 repeat-
edly until "CLOCK SET" appears on the
display.
u
u
Press the or button 6repeatedly
until "CLOCK OFF" or "CLOCK ON" ap-
pears on the display.
u
Press the button 6.
Press the or button 6 to switch
the display between ON and OFF.
The time appears on the display. The hours
flash and can be adjusted.
When you have finished making your chang-
es,
u
Adjust the hours with the
6.
buttons
u
press the MENU button :.
Once the hours are set,
press the button 6.
The minutes flash.
u
u
Adjusts the minutes with the
tons 6.
but-
u
Press the MENU button : twice.
Selecting 12/24-hour clock
mode
u
Press the MENU button :.
The display shows "MENU".
u
u
Press the or button 6 repeated-
ly until "24 H MODE" or "12 H MODE"
appears on the display.
Press the or button 6 to switch
between the modes.
52
Sound
When you have finished making your chang-
es,
Sound
You can adjust the sound settings (bass
and treble) separately for each source (ra-
dio, CD, CD changer or AUX).
u
press the AUDIO button ;.
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
The volume distribution settings (balance
and fader) apply to all the audio sources
(except for traffic announcements).
Fader and balance can be adjusted for traf-
fic announcements (TA) only during a traf-
fic announcement.
u
press the AUDIO button ;.
"BASS" appears on the display.
u
u
Press the button 6 repeatedly until
"BAL" appears on the display.
Note:
If bass and treble allow only a limited
adjustment, set the equaliser preset-
ting to EQ OFF.
Press the or button 6 to adjust
the left/right volume distribution.
For further details, please read the sec-
tion "Equaliser presets".
When you have finished making your chang-
es,
u
press the AUDIO button ;.
Adjusting the bass
u
Press the AUDIO button ;.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
"BASS" appears on the display.
u
Press the or button 6 to adjust
the bass.
When you have finished making your chang-
es,
u
press the AUDIO button ;.
"BASS" appears on the display.
u
press the AUDIO button ;.
u
u
Press the button 6 repeatedly until
"FADER" appears on the display.
Adjusting the treble
Press the or button 6 to adjust
the front/rear volume distribution.
u
Press the AUDIO button ;.
"BASS" appears on the display.
When you have finished making your chang-
es,
u
u
Press the button 6 repeatedly until
"TREBLE" appears on the display.
u
press the AUDIO button ;.
Press the or button 6 to adjust
the treble.
53
Sound
X-Bass
Equalizer presettings (Presets)
X-BASS
This device features an equalizer in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
X-Bass allows you to increase the bass at
low volume.
The selected X-Bass setting is effective for
all audio sources (radio, CD, CD changer or
AUX).
To select an equalizer preset,
u
Press the AUDIO button ;.
The X-BASS increase can be set in incre-
ments of 1 to 3.
"BASS" appears on the display.
"XBASS OFF" means that the X-BASS func-
tion is switched off.
u
u
Press the button 6 repeatedly until
"POP", "ROCK", "CLASSIC" or "EQ OFF"
appears on the display.
Adjusting the X-BASS boost
Press the or button 6 to select
one of the presets or select "EQ OFF"
to switch off the equalizer.
u
Press the AUDIO button ;.
"BASS" appears on the display.
When you have finished making your chang-
es,
u
u
Press the button 6 repeatedly until
"XBASS" appears on the display with
the current setting.
u
press the AUDIO button ;.
Press the or button 6repeatedly
until the desired setting appears on the
display.
Note:
By selecting an equaliser preset (POP,
ROCK, CLASSIC), the adjustment
range of the sound setting for bass and
treble is restricted.
When you have finished making your chang-
es,
u
press the AUDIO button ;.
54
External audio sources
Specifications
External audio sources
Specifications
Instead of the CD changer, you can also
connect another external audio source
equipped with a line output. Audio sources
can, for example, be portable CD players,
MiniDisc players or MP3 players.
Amplifier
Output power:
4 x 18 watt sine ac-
cording to
DIN 45 324
at 14.4 V
4 x 45 watt max.
power
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
Tuner
Wavebands in Europe:
FM
MW
LW
Note:
If no CD changer is connected, the
AUX input must be switched on in the
menu.
:
:
:
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
Switching the AUX input on/off
FM frequency response:
35 - 16,000 Hz
u
Press the MENU button :.
The display shows "MENU".
u
u
Press the or button 6 repeated-
ly until "AUX OFF" or "AUX ON" appears
on the display.
CD
Frequency range:
20 - 20,000 Hz
2 V
Press the or button 6 to switch
AUX on or off.
Pre-amp out
4 channels:
When you have finished making your chang-
es,
u
press the MENU button :.
Input sensitivity
AUX input:
Note:
2 V / 6 kΩ
If the AUX input is switched on, you can
select it by pressing the SRC/ button
>. The display shows "AUX INPUT"
and a border appears around the AUX
symbol.
Weight
approx. 1.3 kg
Subject to changes!
55
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio remplie !
Tenete per favore il libretto di apparecchio, debitamente riempito, in un
posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
Vänligen förvara ifyllt apparatpass på säker plats!
¡Favor guardar el documento del aparato debidamente llenado en un lugar
seguro!
Por favor, guardar o cartão preenchido do aparelho num lugar seguro!
Det udfyldte apparatpas opbevares et sikkert sted!
Prosimy przechowywać metrykę radia w bezpiecznym miejscu!
Vyplněný dokument o přístroji prosím bezpečně uschovejte!
Vyplnený dokument o prístroji prosím bezpečne uschovajte!
339
Country:
Phone:
Fax:
WWW:
Germany
Austria
(D)
(A)
(B)
0180-5000225
01-610 39 0
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
Belgium
Denmark
Finland
02-525 5444
(DK) 44 898 360
(FIN) 09-435 991
France
(F)
01-4010 7007
Great Britain
Greece
(GB) 01-89583 8880
(GR) 210 94 27 337
(IRL) 01-46 66 700
Ireland
Italy
(I)
(L)
02-369 62331
40 4078
Luxembourg
Netherlands
Norway
Portugal
Spain
(NL) 00 31 24 35 91 338 00 31 24 35 91 336
(N)
(P)
(E)
(S)
+47 64 87 89 60
2185 00144
902 52 77 70
08-7501850
+47 64 87 89 02
2185 00165
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
022-8771260
0212-346 00 40
708-6817188
Sweden
Switzerland
Czech. Rep.
Hungary
Poland
(CH) 01-8471644
(CZ) 02-6130 0446
(H)
(PL)
(TR)
76 511 803
0800-118922
0212-335 06 71
Turkey
USA
(USA) 800-950-2528
Brasil
(Mercosur)
Malaysia
(BR) 0800 7045446
+55-19 3745 2773
+604-6413 640
(Asia Pacific) (MAL) +604-6382 474
Gerätepass
Name:
Typ:
.....................................................................
7 647
....................................................................
Serien-Nr:
BP ................................................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
|