Black Decker MM327 User Manual

|
MM327 Bicycle Handlebar Mount Kit for Magellan®, Mio®, and Navman® GPS  
Package Contents:  
(1) CM032-ST-2 - Bicycle handlebar mount  
(1) APMM300 - Dual-T pattern adapter plate  
Compatible with:  
• Magellan Maestro: 3100, 3140, 3200, 3210, 3220, 3225, 3250, 4000, 4010, 4040, 4050,  
4210, 4215, 4200, 4220, 4245, 4250, 4350, 4370, 4700, 5310, and 5340  
• Magellan RoadMate: 1200, 1210, 1212, 1215, 1220, 1230, 1340, 1400, 1412, 1430, 1440,  
1470, 1475T, 2000, 2200T, 2250T, 300, 3000T, 3050T, 360, 500, 500 Plus, 6000T, 700, 760,  
800, and 860T  
• Magellan Triton: 1500, 200, 2000, 300, 400, and 500  
• Magellan Crossover: GPS 2500T  
• Mio Moov: 300, 301, 310, 330, 330 Europe, 360, 370 Europe, 380, 500, and Knight Rider Ed.  
• Navman: S50, S50 3D, S70, S90i  
CM032-ST-2  
Bicycle Handlebar Mount  
Precaution: Arkon strongly recommends using a securing strap to  
!
APMM300  
Dual-T Adapter Plate  
provide extra protection for your device. Failure to do so may result  
in damage to your device. Do not operate portable devices while  
riding. Arkon Resources, Inc. assumes no liability for safety of bicycle  
rider or portable device.  
Bicycle Handlebar Mounting  
...continued from previous column  
Step 1. Choose a suitable location on the handlebars of your bicycle  
in which to mount the pedestal.  
Step 2. Adjust the angle of the mount and cradle as needed, then  
retighten the swivel tightening knob (F) to firmly secure.  
Step 2. Unscrew the wing nut (A) and remove the screw in order to  
open the notch cover plate (B) so pedestal can be placed  
around the handlebars.  
Connect Adapter Plate to Device  
Step 1. Insert the adapter plate into the vertical groove pattern on  
the back of the GPS unit (not included, sold separately.)  
A
C
B
Step 3. Wrap the rubber rings (C) around the handlebar and re-clip  
the notch cover plate (B) around the rubber rings. Tighten  
the assembly by twisting the wing nut (A) until it stops.  
Connect GPS Device to Bicycle Mount  
Step 1. Connect the dual T-slots (G) on the back of the adapter plate  
to the dual T-tabs (D) on the bicycle mount.  
Dual-T Device Attachment  
Step 1. If your Magellan device has dual-T slots on the back, attach  
the unit to the bicycle mount by connecting the dual T-slots  
(E) to the dual T-tabs of the mount (D).  
D
D
F
E
F
Step 2. Adjust the angle of the mount and cradle as needed, then  
retighten the swivel tightening knob (F) to firmly secure.  
®
Safety Precautions  
!
Do not reposition the pedestal while cycling or driving. Arkon  
Resources, Inc. does not promote the adjustment of GPS or mobile  
devices except when the bicycle or vehicle is safely parked or stopped.  
The Mobile Mounting Specialists™  
Consumer Hotline:  
Arcadia, CA 91006 USA  
Designed in USA | Made in Taiwan  
© Copyright 2009 Arkon Resources, Inc.  
USA (800) 841-0884  
INT’L (626) 254-9005  
Monday - Friday 9am-5pm, PST  
Arkon is not responsible for any damages caused to your bicycle, your  
device, or yourself due to the installation or use of this product.  

Abt VP30 User Manual
Audiovox Prestige P967 User Manual
Califone TP285 User Manual
Clarion NX509 User Manual
Crown Boiler BB100C User Manual
FujiFilm 16113550 User Manual
IDEAL INDUSTRIES MINI S24 User Manual
Infinity Systems Inc Car Speaker 50 2CS User Manual
JL Audio C2 690tx 11012008 User Manual
JVC Car Stereo System KD R422 User Manual