™
TuneBase FM
Mount, power, and play your iPod mini as you drive
for iPod® mini
User Manual
F8V7097
Setup Instructions
1. Turn your car stereo volume down.
2. Connect the Belkin TuneBase FM to your cigarette lighter
adapter in your car. The LED on the TuneBase FM indicates
proper connection.
Warning: Avoid excessive force when rotating the connector in the
cigarette lighter adapter. When you face resistance, unplug the
connector from the outlet and reinsert it in the desired position. Failure
to do so may result in damage to the car’s cigarette lighter adapter or
power outlet.
NOTE: The exact dimensions of power outlets vary by make and model
of the car. In some cases, the fit might be improved by pressing the collar
(included with the product) into the power outlet before inserting the
connector in order to ensure a tight fit. However, the collar will not be
necessary in most cars (and will not fit in the power outlet).
Setup
|
02
3. Bend and position the
flexible-steel neck to a
desired position for your
iPod mini.
Cradle
4. Carefully slide your iPod
mini into the form-fitted
cradle at the top of the
TuneBase FM. The iPod
mini will power on if the
car battery is on. The iPod
mini will go into sleep
Swivel neck
mode if power is removed
from the cigarette lighter
or the car is turned off.
Gooseneck
Cigarette lighter
adapter
Setup
|
03
5. As an optional user method, connect your cassette adapter or audio
cables to the 3.5mm audio-out jack and listen to your iPod mini
through your car stereo or portable stereo device.
Make sure the ring is
positioned properly
Power outlet or
cigarette lighter adapter
around the metal
contact to ensure
proper electrical
connection with the
Fit Ring
power outlet.
Connector
Setup
|
04
Using the TuneBase FM Transmitter
The TuneBase FM transmitter function automatically turns on when the
iPod mini is connected and car power is available. It automatically turns
off when the iPod mini is removed or car power becomes unavailable.
1. Tune your car stereo frequency to a channel with a weak broadcast
signal. The ideal channel is one that is not broadcasting a radio
program, or is doing so weakly.
2. Press the ▲ or ▼ button on the TuneBase FM to select the
transmission frequency chosen in step 1, in your car, for broadcast.
Press and hold either button for fast-forward or backward tuning.
3. To memorize a specific frequency (four stations maximum) for
easy selection:
(a) select desired frequency using up and down arrows;
(b) press and hold the desired preset button for 2 seconds; the
first digit of the display will indicate the chosen memory
spot; and
(c) press 1 of the 4 memory buttons briefly to toggle among the
4 memory slots and retrieve the memorized frequency.
4. Adjust the volume of your FM radio to the desired listening level.
Setup
|
05
Frequency display
Frequency Selector
Memory
indicator
Memory
NOTE: In some instances, when open frequencies are hard to find, lowering
the car antenna (available in some cars) will improve the clarity of the
TuneBase FM’s signal.
NOTE: To avoid damage to the iPod mini, please make sure to disconnect the
iPod mini from the TuneBase FM’s cradle before disconnecting the TuneBase
FM from the power outlet of the car.
Setup
|
06
Troubleshooting
Issue
My iPod does not seem to be charging.
Solution 1
Make sure that the TuneBase FM is correctly connected to your car’s
power outlet. The green indicator light on the cigarette lighter adapter
portion of the product should be lit up at all times.
Solution 2
Check to see that the iPod is pushed all the way into the cradle.
Solution 3
Ensure that your car’s power outlet is receiving power. Some cars are
designed so that power is not provided to the power outlet unless the
car is in ignition mode or the engine is started. If none of these solutions
solves the problem, the fuse of the TuneBase FM might be burned. In
order to exchange the fuse, please carefully follow these steps:
NOTE: DO NOT ATTEMPT TO DO THIS IN THE CAR. Use a clean, level
surface or table for disassembly so that components do not get lost.
The contact piece at the front end of the cigarette lighter adapter is
spring-loaded. With pliers, carefully and slowly remove the nut at the
front end, so that the spring inside the cigarette lighter adapter does
not get lost. The fuse will be easily accessible now. Please exchange for a
new one available at any car supply store. Please refer to Fig. B for correct
order of assembly. Be sure to tighten the nut firmly with pliers.
Troubleshooting
|
07
Fig. B
Spring
(not pictured)
Fuse
Contact
Friction washer
Metal washer
Nut
Max 30
degrees
Max 30
degrees
Issue
The TuneBase FM and iPod are in the way of my
car’s controls.
Solution 1
The TuneBase FM has been designed to easily
position in a wide range of orientations within the
car. Use the gooseneck and the articulation behind
the docking cradle to position it away from any
controls of the car. Be sure to position the gooseneck
in as close to an upright position in relation to the
Adapter as possible (Fig. A).
Fig. A
Troubleshooting
|
08
Issue
The TuneBase FM rotates out of position around the center of the
power outlet.
Solution 1
Be sure to solidly attach the cigarette lighter adapter portion of the
product in the power outlet. Test the stability by pushing the product
sideways before driving.
Solution 2
In some cars, the power outlet is bigger in diameter than the cigarette
lighter adapter.You will notice a wiggle in the TuneBase FM when
pushing it. In that case, fit the collar provided around the TuneBase FM’s
cigarette lighter adapter. Then, attach the cigarette lighter adapter to the
power outlet. Slide the collar into the power outlet, making sure that all
four protrusions securely fit into the power outlet.
Solution 3
Some power outlets will not fit all four protrusions of the collar. In order
to improve the fit of the cigarette lighter adapter in the power outlet of
the car, the collar can be cut to size. In order to do so, please cut as many
protrusions as necessary with scissors. Cut one by one, always trying the
fit in the power outlet after each cut. Cut the protrusions from one side to
the other, not the opposites (Fig. C).
Troubleshooting
|
09
Cut
Cut
Test fit in power outlet after each cut!
Cut
Fig. A
Issue
The TuneBase FM connects firmly to the power outlet of my car but the
TuneBase FM still rotates.
Solution
Check to see if the power outlet of your car rotates in its socket. If so,
please consult your car manufacturer.
Troubleshooting
|
10
Issue
The rubber friction washer is out of position and I cannot insert the
cigarette lighter adapter into the car’s power outlet.
Solution
Please use a clean and empty table for disassembly. DO NOT ATTEMPT TO
DO THIS IN THE CAR. Please use pliers to loosen the nut at the end of the
cigarette lighter adapter slightly. It is not necessary to unscrew the entire
nut. Move the friction washer back into centered position. Use pliers to
tighten the nut firmly.
Issue
I pulled the TuneBase FM out of the power outlet of my car but the
rubber washer slipped off and remained in the power outlet.
Solution
This is rare, but if it occurs:
DISCONNECT THE BATTERY OF YOUR CAR BEFORE ATTEMPTING TO
REMOVE THE WASHER! ANY ATTEMPT TO REMOVE THE WASHER WITHOUT
DISCONNECTING THE BATTERY MAY RESULT IN PHYSICAL HARM OR
DAMAGE TO THE CAR.
Use pliers to carefully remove the friction washer from the power outlet.
Troubleshooting
|
11
Warning:
The TuneBase/TuneBase FM requires full concentration and both hands
to install. DO NOT ATTEMPT TO INSTALL THE PRODUCT WHILE DRIVING.
Make sure the product fits securely and firmly into your car’s power outlet
before driving. After installation, ensure that the TuneBase FM does not
freely rotate in the power outlet of the car by following the instructions
in this User Manual. DO NOT ATTEMPT TO ADJUST OR RETRIEVE AN
UNSECURED TUNEBASE FM OR IPOD WHILE DRIVING. Adjust the TuneBase
FM so that both the TuneBase FM and the iPod do not interfere with any
of the operating controls of the car.
DO NOT INSERT ANY OBJECTS OTHER THAN THE CIGARETTE
LIGHTER ADAPTER INTO THE POWER OUTLET OF THE CAR WITHOUT
DISCONNECTING THE BATTERY OF THE CAR FIRST. FAILURE TO OBSERVE
THIS SAFETY WARNING CAN RESULT IN POSSIBLE INJURY OR PROPERTY
DAMAGE.
Belkin does not assume any responsibility for personal injury or property
damage incurred due to hazardous driving as a result of interaction with
the TuneBase FM, the iPod, or the power outlet of the car.
Warning
|
12
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the
product F8V7097, to which this declaration relates, is in conformity with
Emissions Standard EN55022 and with Immunity Standard EN55024, LVP
EN61000-3-2, and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme á la norme NMB-003
du Canada.
Information
|
13
Belkin Corporation Limited 3-Year Product Warranty
Belkin Corporation warrants this product against defects in materials and
workmanship for three years. If a defect is discovered, Belkin will, at its option,
repair or replace the product at no charge provided it is returned during the
warranty period, with transportation charges prepaid, to the authorized Belkin
dealer from whom you purchased the product. Proof of purchase may be
required. This warranty does not apply if the product has been damaged by
accident, abuse, misuse, or misapplication; if the product has been modified
without the written permission of Belkin; or if any Belkin serial number has
been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF
ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN
SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification,
extension, or addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR ANY OTHER
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING, ANY
PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or
consequential damages or exclusion of implied warranties, so the above
limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from state to state.
Warranty
|
14
Belkin Corporation
501 West Walnut Street
Compton, CA, 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
Tech Support
US: 310-898-1100 ext. 2263
800-223-5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
© 2005 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
P74667-B
|