Bang Olufsen BEOCENTER 26 Jun User Manual
BeoCenter 6–26  
Reference book  
3
Tables of contents in the Reference book  
The contents of this Reference book is divided into sections. Each particular section  
starts with its own detailed table of contents provided with page references. Texts  
in black refers to the current section, whereas the remaining sections are described  
in general terms and written in grey.  
The main sections are:  
– Advanced operation  
– Tuning and preference settings  
– Placement, sockets and connections  
– BeoLink system  
– Index  
Menu overview  
4
The illustration on this page shows  
the content of the menu system ,  
and also indicates where in the  
Reference book you can find further  
information about the menus.  
PROGRAM AND STATION GROUPS  
OPTIONS  
CONNECTIONS (p. 47)  
TV TUNING (p. 26)  
EDIT PROGRAMS  
ADD PROGRAMS  
AUTO TUNING  
MANUAL TUNING  
EXTRA  
AV1  
AV2  
AV3  
SOUND (p. 31)  
VOLUME  
BALANCE  
BASS  
FINE TUNE  
DECODER  
TREBLE  
TV SYSTEM  
LOUDNESS NO/YES  
PICTURE (p. 30)  
BRIGHTNESS  
SOUND  
RADIO TUNING (p. 26)  
EDIT PROGRAMS  
ADD PROGRAMS  
AUTO TUNING  
CONTRAST  
COLOUR  
TINT  
MANUAL TUNING  
RADIO DISPLAY  
ADJUST DAB AERIAL  
DAB DRC  
CLOCK (p. 29)  
TIME  
DATE  
MONTH  
YEAR  
MODULATOR (p. 63)  
SYNCHRONISE  
ON/OFF  
BEOLINK (p. 56)  
LINK FREQUENCY (p. 63)  
LINKED RADIO  
INTERNAL RADIO  
MENU LANGUAGE (p. 32)  
DANSK  
FREQUENCY  
PLAY TIMER (p. 8)  
TIMER ON/OFF  
TIMER INDEX  
PLAY TIMER PROGRAMMING  
SOURCE  
DEUTSCH  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
PROGRAM  
ITALIANO  
START TIME  
NEDERLANDS  
SVENSKA  
STOP TIME  
DAYS  
WAKE UP TIMER (p. 6)  
STAND POSITIONS (p. 28)  
VIDEO  
AUDIO  
STANDBY  
The extended on-screen menu system for the  
television. The presence of the greyed menu items  
depends on whether these optional extras are  
available in your system.  
Press MENU on Beo4 to access the main menu.  
Advanced operation  
5
This chapter tells you how to operate  
your television beyond daily use.  
•
•
•
•
•
Wake-up Timer, 6  
Set the television to switch itself on and off, 8  
Set-top box operation, 10  
It also tells you how to operate a  
connected set-top box and other  
connected video equipment.  
Use your television as a computer monitor, 12  
Surround sound, 13  
Tuning and preference settings, 15  
Find out how to set up your television for the first time and tune in programs. This  
chapter also contains information about settings for time, date, stand positions,  
picture and sound.  
Placement, sockets and connections, 35  
Find out how to handle and place your television and where the sockets are placed.  
Find out how to connect a decoder, set-top box or video recorder to your television  
and how to register extra equipment. How to connect speakers and how to turn  
your television into a surround sound system, including how to choose speaker  
combinations.  
BeoLink system, 55  
Find out how to connect an audio system to your television and operate an  
integrated audio/video system. Find out how to make link connections, operate a  
link system and set up your television in a link room. Find out How to customise  
Beo4 to your system.  
Index, 68  
Wake-up Timer  
6
You can make the television wake  
you up in the morning.  
Enter a Wake-up Timer  
You must choose the source and program  
number of your Wake-up Timer as well as the  
start time.  
WAKE UP TIMER  
TV  
The Wake-up Timer is a once-only  
Timer, it lasts for one hour. Like an  
alarm clock, it is disabled once it has  
been executed. It applies only to the  
television it has been programmed  
on.  
SOURCE  
PROGRAM  
START TIME  
ON / OFF  
21 BBC  
07:00  
ON  
To enter settings for a Wake-up Timer …  
> Press MENU to bring up the TV SETUP menu  
and press to highlight PLAY TIMER.  
> Press GO to bring up the PLAY TIMER menu and  
press to highlight WAKE UP TIMER.  
> Press GO to bring up the WAKE UP TIMER  
menu.  
Once you have made one Wake-up  
Timer, the television automatically  
suggests the time you entered for the  
latest Wake-up Timer when you enter  
a new one.  
GO  
store  
> Press or to move through the menu items.  
> Use the number buttons to enter information or  
press or to view your choices for each item.  
What’s on the WAKE-UP TIMER menu …  
> When you have filled in the required information, SOURCE … Choose the source for your Wake-up  
press GO to store your Wake-up Timer.  
Timer from the available sources in your system.  
PROGRAM (Program number) … Choose the  
program number you want.  
> Press EXIT to exit all menus.  
Wake-up Timers can, of course, also  
be disabled again.  
START TIME … Key in the time when you want  
the system to start playing.  
When you have programmed a Wake-  
up Timer, the television cannot be  
part of an ordinary Play Timer or  
Standby Timer until the Wake-up  
Timer has been carried out or  
disabled.  
ON/OFF … Activate or deactivate your Wake-up  
Timer. Choose ON to activate and OFF to  
deactivate.  
7
Check or delete a Wake-up Timer  
You can call up the settings for the Wake-up  
Timer to check the time or to disable the  
Wake-up Timer by setting it to OFF.  
PLAY TIMER  
TIMER ON / OFF  
OFF  
TIMER LIST  
TIMER PROGRAMMING  
To change settings for a Wake-up Timer or  
delete it …  
WAKE UP TIMER  
07:00  
> Press MENU to bring up the TV SETUP menu  
and press to highlight PLAY TIMER.  
> Press GO to bring up the PLAY TIMER menu and  
press to highlight WAKE UP TIMER.  
> Press GO to bring up the WAKE UP TIMER  
menu.  
GO  
select  
> Press or to move through the menu items.  
> Use or to change settings or enter a new  
time with the number buttons. Change the ON/  
OFF setting to OFF if you wish to delete the  
Wake-up Timer.  
> When you have made your changes, press GO  
to store them.  
> Press EXIT to exit all menus.  
Set the television to switch itself on and off  
8
You can make your television switch  
itself on and off automatically via the  
timed play and timed standby  
Before you start …  
Timed play and timed standby  
If you connect a Bang & Olufsen audio or video  
product to your television with a Master Link  
cable, you can exclude or include it in timed  
functions via the Play Timer menu. For  
You can preset your television to start and  
stop automatically at the same time and day  
every week.  
functions, if, for example, there is a  
programme you do not want to miss.  
example, set the television’s Play Timer to ON To enter settings for timed play or timed  
and an audio system’s Play Timer to OFF if you  
wish timed functions to apply only to the  
television.  
standby …  
Enter as many as six Timer settings,  
and bring up an on-screen list of the  
Timer settings you have entered.  
From this list, you can edit or delete  
your Timer settings.  
> Press MENU to bring up the TV SETUP menu and  
press to highlight PLAY TIMER.  
> Press GO to bring up the PLAY TIMER menu and  
press to highlight PLAY TIMER  
To switch on the Play Timer …  
> Press MENU to bring up the TV SETUP menu  
and press to highlight PLAY TIMER.  
> Press GO to bring up the PLAY TIMER menu,  
and press or to highlight TIMER ON/OFF.  
> Press GO to bring up the TIMER ON/OFF menu.  
> Press or to reveal ON.  
PROGRAMMING.  
> Press GO to bring up the PLAY TIMER  
PROGRAMMING menu.  
If your television is integrated with a  
Bang & Olufsen audio system with a  
Master Link cable, these systems can  
perform the timed play or timed  
standby functions as well.  
> Press or to move through the menu items.  
> Use the number buttons to enter information or  
press or to view your choices for each item.  
When DAYS is highlighted, press once to be  
able to move through the days, and press or  
to remove a day you do not want. Press to  
move to the next day, and press to move back  
to a previous day. When the weekday(s) you  
want are displayed, press GO to accept the  
day(s).  
> Press GO to store the setting.  
For further information about how to switch the  
Play Timer on or off for a connected Bang &  
Olufsen audio or video product, refer to the Guide  
enclosed with the product.  
For your timed settings to be  
executed correctly, ensure that the  
built-in clock is set to the correct  
time. For further information, refer to  
the chapter ‘Set the time and date’  
on page 29.  
> When you have filled in the required information,  
press GO to store your Timer settings.  
> Press EXIT to exit all menus.  
NOTE! If your television is set up in a link room,  
Timer programming must be carried out on your  
main room system.  
9
View, edit or delete a Timer  
Bring up an on-screen list of the settings you  
have entered. From this list, you can edit or  
delete your Timer settings.  
TIMER PROGRAMMING  
TV SETUP  
PROGRAM GROUPS  
SOURCE  
TV  
PROGRAM  
START TIME  
STOP TIME  
DAYS  
18 BBC  
15:40  
16:40  
TUNING  
TIMER RECORDING  
PLAY TIMER  
OPTIONS  
To view, edit or delete your Timer settings …  
> Select TIMER INDEX from the TIMER SETUP  
menu to bring up your list of Timer settings.  
The first Timer setting in the list is already high-  
lighted.  
TIMER SETUP  
M . . TF . S  
TIMER ON / OFF  
TIMER INDEX  
PLAY TIMER PROGRAMMING  
ON  
STAND POSITIONS  
. . .  
TIMER ON / OFF  
TIMER INDEX  
PLAY TIMER PROGRAMMIN
WAKEUP TIMER  
OFF  
> Press or to move the cursor to a Timer  
setting you wish to edit.  
15:40-16:40  
BBC  
TV 18  
M . . TF . .  
GO  
select  
store  
> To edit a setting, press GO and follow the  
procedure described to the left.  
GO  
select  
> To be able to delete a selected setting, press the  
yellow button.  
PLAY TIMER INDEX  
15:40-16:40  
BBC  
TV 18  
M . . TF . .  
> If you change your mind, press to move the  
setting back into the list. You can also press  
EXIT to exit all menus.  
6:00 - 7:00  
ZDF  
TV  
MTWTF . .  
3
> Press the yellow button a second time to delete  
the setting.  
20:00-22:00  
CNN  
TV 15  
MT . . . S .  
delete  
edit  
GO  
What’s on the TIMER PROGRAMMING  
menu …  
SOURCE  
Abbreviations for days of the week:  
Choose the source for your Timer from the  
available sources in your system. Choose  
STANDBY, if you want the television to switch  
off. If you have other compatible video or audio  
systems connected to your television, they are  
switched off as well.  
M … Monday  
T …  
Tuesday  
W … Wednesday  
T …  
F …  
S …  
S …  
Thursday  
Friday  
Saturday  
Sunday  
PROGRAM (Program number) … Once your  
source is chosen, choose the program number  
you want.  
START TIME and STOP TIME … Key in the times  
when you want the system to start and/or stop  
playing. If you have set the Timer source to  
STANDBY, it is only possible to enter a stop time.  
DAYS … Select the specific weekday(s) on which  
you want your Timer executed. All the  
weekdays will be displayed – starting with M for  
Monday.  
You can only use a source, such as A.MEM, if it is  
present in your setup.  
Set-top box operation  
10  
The built-in Set-top Box Controller  
acts as an interpreter between a set-  
top box of your choice and the Beo4  
remote control. When a set-top box  
is connected, you can use the Beo4  
remote control to gain access to the  
programs and functions offered by  
your set-top box.  
Set-top Box Controller menu  
Some of the buttons on your set-top box  
remote control are not immediately available  
on Beo4. To find out which Beo4 buttons  
activate specific services or functions in your  
set-top box, bring up the Set-top Box  
Controller menu on the screen.  
1
2
3
4
5
GUIDE  
MENU  
TEXT  
INFO  
WIDE  
GUIDE  
MENU  
TEXT  
1
2
3
4
5
Press to switch on the set-top  
box  
DTV  
INFO  
WIDE  
Some functions are immediately  
available via Beo4 when you switch  
on the set-top box. Additional  
functions are available through a  
Set-top Box Controller menu that you  
bring up on the screen.  
Press to bring up the Set-top Box MENU  
Controller menu  
Example of a Set-top Box Controller menu – The  
Beo4 buttons are shown to the left on the menu  
and the set-top box buttons are shown to the right.  
Press the number button that  
activates the function you want,  
or …  
1 – 9  
… press one of the coloured  
buttons to activate a function  
NOTE! If you television is equipped with the  
optional DVB module, you activate a connected  
set-top box with the V.AUX cue in the Beo4  
display. If no DVB module is fitted, you activate  
your set-top box with the DTV button.  
11  
Universal Beo4 operation  
Use the set-top box’s own menu  
Use a set-top box in a link room  
If you know which Beo4 button activates the  
function you want, you can activate the  
function without bringing up the Set-top Box  
Controller menu first.  
Once you have activated your set-top box,  
When your set-top box is connected to the  
you can operate the set-top box’s own menus, television in the main room, you can operate  
such as the program guide, via Beo4.  
the set-top box from the link room television.  
However, the Set-top Box Controller menu  
cannot be displayed on the television screen  
in the link room.  
While the set-top box’s own  
menu is shown …  
While your set-top box is  
activated …  
Moves the cursor up or down  
Press GO and then the number  
button that activates the  
function you want  
GO  
Press to switch on the set-top  
box in the main room  
DTV  
1 – 9  
Moves the cursor left or right  
Press GO and then the number  
button that activates the  
function you want  
GO  
Press one of the coloured  
Selects and activates a function  
GO  
GO  
1 – 9  
buttons to activate a function  
Press GO and then or to  
step up or down through  
programs directly  
GO  
GO  
Press GO and then or to  
step between menu pages or  
step in program lists  
GO  
Press one of the coloured  
buttons to activate a function  
Press and hold GO to bring up  
the Program guide or the ‘Now/  
Next’ banner on the screen  
Exits menus, or returns to a  
previous menu*  
STOP  
EXIT  
depending on your set-top box  
Exits menus, enters or exits  
different modes, such as radio  
Use the coloured buttons as  
indicated in the menus of your  
set-top box  
*Depending on your set-top box,  
you may have to press EXIT twice  
instead of STOP to return to a  
previous menu.  
When set-top box is selected as  
source, press MENU twice to  
bring up the television’s main  
menu.  
12  
Use your television as a computer monitor  
If you connect your television to a  
computer, as described on page 41,  
you can use it as a monitor.  
Bring up the computer image on the screen  
To see the computer picture on the television  
screen, you must bring it up with Beo4.  
DVI SETUP  
BRIGHTNESS 31  
CONTRAST  
COLOUR  
31  
31  
IMPORTANT! If you wish to connect a  
computer to the television and use the  
television as a monitor, make sure that you  
disconnect the television, the computer,  
and all equipment connected to the  
computer from the mains before you  
connect the computer and the television  
to each other.  
To bring up the computer  
picture …  
Press repeatedly until PC appears  
in the Beo4 display  
LIST  
GO  
Press to bring up the picture  
PC  
When you have the computer picture on the  
screen, you must call up the DVI SETUP menu to  
make adjustments to brightness, contrast and  
colour.  
You can then operate the  
computer as you normally would.  
When in use, the computer must be  
connected to a grounded wall outlet as  
specified in the computer’s setting-up  
instructions.  
Picture adjustments …  
> Press MENU to bring up the DVI SETUP menu.  
> Press or to move between the menu  
options.  
> Press or to adjust settings.  
> Press GO to store your settings and exit the  
menu.  
The settings you make in this menu only apply to  
the PC setup.  
Surround sound  
13  
If your television is equipped with the  
optional surround sound module,  
you can extend your system in to a  
surround sound system by adding  
four Bang & Olufsen loudspeakers  
and a BeoLab 2 subwoofer*.  
Select speakers for movie sound  
You can select the speaker combination that  
suits the source you are using, provided that  
the various sound modes are available in your  
system.  
Press repeatedly to display  
SPEAKER on Beo4  
LIST  
SPEAKER  
When you switch on one of the  
sources, speakers in a surround  
sound system can be cut in or out,  
depending on what kind of sound  
suits the source you are using.  
Press the number of the speaker 1 – 5  
combination you want. The  
selected speakers cut in  
automatically  
Speaker combinations  
SPEAKER 1 … Sound in the centre speaker only.  
SPEAKER 2 … Stereo sound in the two front  
speakers. The BeoLab 2 subwoofer is active.  
SPEAKER 3 … The centre speaker, front speakers  
and the BeoLab 2 subwoofer are active.  
SPEAKER 4 … Enhanced stereo sound in the front  
and rear speakers. The BeoLab 2 subwoofer is  
active.  
Press to adjust the balance  
between the front and rear  
speakers  
Press to adjust the balance  
between the left and right  
speakers  
SPEAKER 5 … Surround sound from all speakers  
including the BeoLab 2 subwoofer. For  
programmes encoded in Surround Sound.  
Press to remove SPEAKER from  
the Beo4 display and return to  
the source you were using  
EXIT  
SPEAKER 4 and 5 are only available if your tele-  
vision is equipped with the optional surround sound  
module.  
If you have added only two front  
speakers to the television, you  
will only be able to choose  
SPEAKER 1–3.  
*NOTE! For further information about how to  
connect speakers to the television, refer to the  
chapter ‘Loudspeaker setup – surround sound’ on  
page 48.  
14  
Tuning and preference settings  
15  
Find out how to perform the first-  
time setup procedure and tune in all  
available programs automatically. In  
addition, you can find information  
about how to edit tuned programs  
and adjust other available settings,  
such as time, date, picture and sound.  
Advanced operation, 5  
All you need to know about using your television beyond daily use, such as how to  
operate timed play and timed standby functions, and a connected set-top box. How  
to operate a surround sound system.  
Tuning and preference settings, 15  
•
•
•
•
•
•
•
•
First-time setup of your television, 16  
Edit tuned programs, 20  
For information about how to place  
your television and connect  
Re-tune or add programs, 26  
Set positions for the television to turn to, 28  
Set the time and date, 29  
additional video equipment, refer to  
the chapter ‘Placement, sockets and  
connections’ on page 35.  
Adjust picture and sound settings, 30  
Choose menu language, 32  
Choose radio display, 33  
Placement, sockets and connections, 35  
Find out how to handle and place your television and where the sockets are placed.  
Find out how to connect a decoder, set-top box or video recorder to your television  
and how to register extra equipment. How to connect speakers and how to turn  
your television into a surround sound system, including how to choose speaker  
combinations.  
BeoLink system, 55  
Find out how to connect an audio system to your television and operate an  
integrated audio/video system. Find out how to make link connections, operate a  
link system and set up your television in a link room. How to customise Beo4 to  
your system.  
Index, 68  
First-time setup of your television  
16  
The setup procedure described here is  
activated only when the television is  
connected to the mains and switched  
on for the first time.  
Select menu language  
Register extra equipment before  
auto-tuning  
MENU LANGUAGE  
CONNECTIONS  
DANSK  
AV1  
AV2  
AV3  
V. MEM  
DVD  
DEUTSCH  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
NEDERLANDS  
SVENSKA  
You must select the menu language,  
register any extra equipment you  
have connected, choose radio display,  
determine the centre position for the  
motorised stand – if you television is  
equipped with one – and start the  
automatic tuning of TV and radio  
programs.  
PC  
GO  
GO  
select  
select  
accept  
The first time you switch on your television,  
you must select which language you want all  
the menus to be displayed in.  
Some extra equipment is detected by the tele-  
vision automatically. You can check and  
confirm the registration of the equipment  
involved.  
The menu language setup appears. If you wish to  
change the menu language at a later date, you can  
find the item under OPTIONS in the TV SETUP  
menu.  
When the CONNECTIONS menu appears …  
> Press or to step between the different  
socket groups: AV1, AV2 and AV3.  
> Press GO to be able to register a connected  
product to the highlighted socket group.  
> Press or to move between the sockets in  
the group.  
> Press TV to switch on the television. The  
language menu appears.  
> Press or to move between the displayed  
languages, if necessary.  
> Press or to register what you have  
connected to the highlighted socket.  
> Press GO to be able to select another socket  
group.  
> Press GO to store your choice.  
> When you have completed your settings, press  
the green button to store the setup.  
NOTE! The described functions of FM and DAB  
radio are only available if your television is  
equipped with the optional FM module or the FM/  
DAB module.  
17  
Select radio display  
Store all programs and settings  
RADIO DISPLAY  
MAXIMUM  
AUTO TUNE  
STYLE  
CHECK AERIAL CONNECTION  
TV  
RADIO  
GERNO VERSI FOLLOW EPIUM  
RADIO  
3
BBC CLASSIC  
BBC National DAB  
GO  
store  
GO  
start  
Before tuning in programs, you are prompted When you have made your selections, a menu  
to select the display type you want to appear  
on the television screen when you select radio  
as your source.  
for program tuning automatically appears on  
the screen.  
When the menu for auto tuning appears, the  
prompt CHECK AERIAL CONNECTION appears to  
remind you to check that your TV aerial and radio  
aerial are properly connected.  
When the DISPLAY SETUP menu appears …  
> Press or to switch between available  
settings. The chosen display type is shown in  
the menu as you change settings.  
> Press GO to store your choice.  
> Press GO to start auto tuning. The television  
tunes in all available programs.  
>> First-time setup of your television  
18  
Determine the centre position  
If your television is equipped with the  
optional motorised stand, the STAND  
ADJUSTMENT menu appears on the screen.  
Once the centre position is determined, select  
your favourite positions for when the  
television is switched on and in standby.  
STAND ADJUSTMENT  
CENTRE POSITION  
When the STAND ADJUSTMENT menu  
appears …  
CALIBRATING . . .  
> Press GO to start stand adjustment.  
> If the adjustment is interrupted the text  
‘ADJUSTMENT FAILED’ appears on the screen.  
Remove obstacles preventing the television  
from turning, and press GO to start adjustment  
again.  
> Once adjustment is complete, the text  
‘ADJUSTMENT OK’ appears, followed by the  
STAND POSITIONS menu.  
> Move between the different stand positions;  
VIDEO, AUDIO and STANDBY by means of  
and and press GO to enter the menu.  
> To turn the television, press or  
.
Make sure that there is enough room for the tele-  
vision to turn to the right and left.  
> Press the green button to store each of the  
positions.  
For further information about stand positions,  
refer to the chapter ‘Set positions for the tele-  
vision to turn to’ on page 28.  
19  
Edit tuned programs  
20  
You can only store a total of 99 radio  
programs, If automatic tuning of all  
radio programs results in more than  
99 programs, the EDIT RADIO  
PROGRAMS menu appears  
Move tuned radio programs  
If automatic tuning results in more than 99  
programs, the EDIT RADIO PROGRAMS menu  
appear automatically.  
EDIT RADIO PROGRAMS  
91 DR P1  
92 DR SOFT  
93 . . . . . . . .  
94 SKYRADIO  
95 DR JAZZ  
96 SR SOFT  
97 . . . . . . . .  
98 NRK JAZZ  
99 . . . . . . . .  
automatically after tuning. You must  
then move the radio programs you  
want to a position within 1 and 99 in  
the list.  
> Press to start editing your radio programs.  
> Press or to select the program you wish to  
move.  
TOO MANY STATIONS!  
MOVE WANTED STATIONS UP  
TO THE NUMBERED PROGRAM  
SLOTS  
> Press once move the program out of the list.  
> Press or to move the program to the  
desired program number.  
You can at any time rearrange the  
order in which your radio and TV  
programs appear, just call up the EDIT  
RADIO PROGRAMS or EDIT TV  
PROGRAMS menus to do so. These  
menus also allow you to name and  
delete radio and TV programs.  
start  
EDIT RADIO PROGRAMS  
91 DR P1  
> Press to make the program move back into  
the list or change places with the program  
which occupies the desired program number.  
> Now, move the program which you changed  
places with to an empty program number or to  
a number already occupied and repeat the  
procedure, or if you wish to delete the program,  
simply press the yellow button when the  
program is moved out of the list.  
92 DR SOFT  
93 . . . . . . . .  
94 SKYRADIO  
95 DR JAZZ  
96 SR SOFT  
97 . . . . . . . .  
98 NRK JAZZ  
99 . . . . . . . .  
THEVOICE  
GULD FM  
. . . . . . . .  
BBC POP  
BBC JAZZ  
KW5 HITS  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
If the tuned programs require  
> When you have moved the relevant programs,  
press STOP to back up through all menus, or  
press EXIT to exit all menus.  
additional editing, such as fine tuning,  
use the MANUAL TUNING menu.  
move  
delete  
move  
EDIT RADIO PROGRAMS  
91 DR P1  
92 DR SOFT  
93 . . . . . . . .  
94 GULD FM  
95 DR JAZZ  
96 SR SOFT  
97 . . . . . . . .  
98 NRK JAZZ  
99 . . . . . . . .  
THEVOICE  
SKYRADIO  
. . . . . . . .  
BBC POP  
BBC JAZZ  
KW5 HITS  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
move  
delete  
move  
Note that all programs placed on unnumbered  
program slots are deleted when you exit this menu.  
NOTE! The described FM radio functions and DAB  
radio functions are only available if your television is  
equipped with the optional FM or FM/DAB module.  
21  
Move or delete tuned programs  
At any time, you can move or delete any  
Delete programs …  
TV SETUP  
PROGRAM GROUPS  
tuned TV or radio programs you do not want. > Press TV to switch on the television, or RADIO  
to switch on the radio.  
TUNING  
TV TUNING  
EDIT PROGRAMS  
Move programs …  
> Press MENU to bring up the SETUP menu and  
press to highlight TUNING.  
TIMER RECORDING  
PLAY TIMER  
> Press TV to switch on the television, or RADIO  
to switch on the radio.  
ADD PROGRAM  
AUTO TUNING  
> Press GO to bring up the TUNING menu. EDIT  
PROGRAMS is already highlighted.  
> Press GO to bring up the EDIT PROGRAMS  
menu.  
OPTIONS  
STAND POSITIONS  
> Press MENU to bring up the SETUP menu, and  
press to highlight TUNING.  
MANUAL TUNING  
LINK FREQUENCY  
EDIT PROGRAM  
ADD PROGRAM  
AUTO TUNING  
> Press GO to bring up the TUNING menu. EDIT  
PROGRAMS is already highlighted.  
> Press GO to bring up the EDIT PROGRAMS  
menu.  
1 DR1  
2 TV2  
> Press or to move to the program you wish  
to delete.  
3 .  
.
.
select  
GO  
select  
> Press to move the program out of the list.  
> Press the yellow button to be able to delete the  
program – the program is then shown in red.  
> Press the yellow button again to finally delete  
the program, or press twice to move the  
program back into the list.  
EDIT TV PROGRAMS  
> Press or to select the program you wish to  
move.  
1
DR1  
TV2  
. . . . . . . .  
EUROSPRT  
ZDF  
RTL7  
. . . . . . . .  
BBC  
2
3
4
5
6
7
8
> Press once to be able to move the program.  
The program is now moved out of the list.  
> Press or to move the program to the  
desired program number.  
> When you have deleted the relevant programs,  
press EXIT to exit all menus.  
. .  
. .  
> Press to make the program move back into  
the list or change places with the program  
which occupies the desired program number.  
> Now, move the program which you changed  
places with to an empty program number or to  
a number already occupied and repeat the  
procedure.  
17 NRK  
18 TV4  
more  
name  
move  
EDIT TV PROGRAMS  
DR1  
1
2
3
4
5
6
7
8
TV2  
. . . . . . . .  
EUROSPRT  
ZDF  
RTL7  
. . . . . . . .  
BBC  
> When you have moved the relevant programs,  
press STOP to back up through all menus, or  
press EXIT to exit all menus.  
. .  
. .  
17 NRK  
18 TV4  
move  
delete  
move  
EDIT TV PROGRAMS  
1
DR1  
2
3
4
5
6
7
8
TV2  
. . . . . . . .  
EUROSPRT  
ZDF  
RTL7  
. . . . . . . .  
BBC  
. .  
. .  
17 NRK  
18 TV4  
move  
delete  
>> Edit tuned programs  
22  
Name tuned programs  
The EDIT PROGRAMS menu also allows you to  
name all programs yourself.  
TV SETUP  
PROGRAM GROUPS  
TUNING  
TV TUNING  
EDIT PROGRAMS  
Name programs …  
TIMER RECORDING  
PLAY TIMER  
> Press TV to switch on the television, or RADIO  
to switch on the radio.  
ADD PROGRAM  
AUTO TUNING  
OPTIONS  
> Press MENU to bring up the SETUP menu, and  
press to highlight TUNING.  
STAND POSITIONS  
MANUAL TUNING  
LINK FREQUENCY  
EDIT PROGRAM  
ADD PROGRAM  
AUTO TUNING  
> Press GO to bring up the TUNING menu. EDIT  
PROGRAMS is already highlighted.  
> Press GO to bring up the EDIT PROGRAMS  
menu.  
1 DR1  
2 TV2  
3 .  
.
.
select  
GO  
select  
> Press or to select the program you wish to  
name.  
EDIT TV PROGRAMS  
> Press the green button to be able to name the  
program. The naming menu is now activated.  
> Press or to find the individual characters in  
the name.  
1
DR1  
TV2  
. . . . . . . .  
EUROSPRT  
ZDF  
RTL7  
. . . . . . . .  
BBC  
2
3
4
5
6
7
8
9
> Press to move to the next character. As you  
move, the television suggests possible names,  
but you can still use and , or and to  
enter or edit all the characters in the name you  
choose.  
. . . . . . . .  
. .  
. .  
17 NRK  
18 TV4  
more  
name  
EDIT TV PROGRAMS  
DR1  
move  
> Press GO to store the name.  
1
2
3
4
5
6
7
8
> If necessary, repeat the procedure and name  
other program numbers.  
A
ZDF  
RTL7  
. . . . . . . .  
BBC  
> When you have named the relevant programs,  
press GO to accept your edited list, or press  
EXIT to exit all menus.  
. .  
. .  
17 NRK  
18 TV 4  
character  
next  
accept  
GO  
23  
Adjust tuned TV programs – manual tuning  
You can store TV programs on program  
numbers of their own. Fine tune the program  
reception, indicate the presence of coded  
programs and choose appropriate sound  
types for the individual programs.  
If the item SYSTEM appears on the menu, then  
TV SETUP  
PROGRAM GROUPS  
make sure that the correct broadcast system is  
displayed before you begin tuning:  
B/G … for PAL/SECAM BG  
TUNING  
TV TUNING  
EDIT PROGRAMS  
TIMER RECORDING  
PLAY TIMER  
OPTIONS  
I …  
for PAL I  
ADD PROGRAM  
AUTO TUNING  
L …  
for SECAM L  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight TUNING.  
M … for NTSC M  
STAND POSITION  
MANUAL TUNING  
LINK FREQUENCY  
D/K … for PAL/SECAM D/K  
EDIT PROGRAM  
ADD PROGRAM  
AUTO TUNING  
SEARCH  
FREQUENCY  
PROGRAM NUMBER  
> Press GO to bring up the TV TUNING menu and  
press to highlight MANUAL TUNING.  
> Press GO to bring up the TV MANUAL TUNING  
menu.  
If programs are broadcasted with two languages  
and you want both languages, you can store the  
program twice, once with each language.  
select  
GO  
select  
TV MANUAL TUNING  
> Press or to move between items on the  
menu.  
Even though you store a type of sound/language,  
you can switch between the various types while  
watching a TV programme. For further information,  
refer to the chapter ‘Adjust sound and picture  
format’ on page 8 in the Guide.  
SEARCH  
. . .  
FREQUENCY  
PROGRAM NUMBER  
NAME  
210  
1
> Press or to view your choices for each item.  
> If you choose NAME, then press the green button  
to start the naming procedure. Use or and  
to enter the characters in the name you  
choose.  
DR1  
EXTRA  
start  
store  
GO  
> To bring up the extra TV MANUAL TUNING  
menu, move to EXTRA and press GO. Now fine  
tune if relevant, or select type of sound.  
> When you have finished editing, press GO to  
accept the settings.  
TV MANUAL TUNING  
FINE TUNE  
DECODER  
TV SYSTEM  
SOUND  
0
OFF  
B / G  
STEREO  
accept GO  
> Press GO to store the adjusted program.  
> Press EXIT to exit all menus.  
TV MANUAL TUNING  
SEARCH  
. . .  
FREQUENCY  
PROGRAM NUMBER  
NAME  
210  
1
DR1  
EXTRA  
TUNING STORED  
>> Edit tuned programs  
24  
Adjust tuned FM or DAB programs – manual tuning  
If your television is equipped with the  
optional FM or FM/DAB module, you can  
tune in FM and DAB radio programs. During  
first time setup both types of radio programs  
are tuned in.  
What’s on the FM RADIO TUNING menu …  
FM/DAB … Choose between FM and DAB.  
SEARCH … Start searching the frequency band up  
or down.  
RADIO MANUAL TUNING  
FM / DAB  
FM  
92.6  
. . .  
SEARCH  
FREQUENCY  
FREQUENCY … Select a frequency to tune in.  
PROGRAM NUMBER … Store or change program  
number. You can store a total of 99 radio  
programs.  
PROGRAM NUMBER 10  
NAME  
STRUER  
> Press RADIO to switch on the radio.  
> Press MENU to bring up the SETUP menu and  
press to highlight TUNING.  
FINE TUNE  
SOUND  
0
STEREO  
NAME … Access the naming function and name  
the program you have selected.  
GO  
> Press GO to bring up the RADIO TUNING menu  
and press to highlight MANUAL TUNING.  
> Press GO to bring up the RADIO MANUAL  
TUNING menu.  
store  
FINE TUNE … Fine tune the frequency of a  
program or tuned program. You can fine tune  
within the range of -4 – +4.  
> Press or to move between items on the  
menu.  
SOUND … Choose between stereo or mono. The  
receiver will switch automatically to Mono  
sound if the Stereo signal is affected by noise.  
> Press or to view your choices for each item.  
> When you switch between FM and DAB the  
menu changes appearance.  
What’s on the DAB RADIO TUNING menu …  
FM/DAB … Choose between FM and DAB.  
SEARCH … Start searching the frequency band up  
or down.  
RADIO MANUAL TUNING  
> If you choose NAME, then press the green  
button to start the naming procedure. Use  
or and to enter the characters in the  
name you choose.  
FM / DAB  
DAB  
. . .  
SEARCH  
CHANNEL  
12 C  
CHANNEL … Select a channel to tune in. Enter  
the channel number by means of the number  
buttons, change between letters by means of  
the arrow buttons left and right.  
DR DAB  
> When you have finished editing, press GO to  
accept the settings.  
PROGRAM  
DR SOFT  
PROGRAM NUMBER 10  
NAME DR SOFT  
> Press GO to store the adjusted program.  
> Press EXIT to exit all menus.  
(ENSEMBLE) … This field informs you of the found  
ensemble, no selection can be made here.  
PROGRAM … Choose between different  
programs within the found ‘ensemble’.  
PROGRAM NUMBER … Store or change program  
number. You can store a total of 99 radio  
programs.  
GO  
store  
NAME … Access the naming function and name  
the program you have selected.  
25  
What’s on the ADJUST DAB AERIAL menu …  
When an ‘ensemble’ has been found, this menu  
can be used to optimise signal reception.  
The ‘ADJUST DAB AERIAL’ menu helps you find  
the best placement for your dab aerial.  
ADJUST DAB AERIAL  
..............................................................  
DR DAB  
CHANNEL  
12 C  
Turn your DAB aerial to a position where the bar is  
as filled out as possible.  
The bar at the top of the menu shows the  
reception quality.  
If no ensembles have been found, you can enter a  
channel number by means of the number buttons,  
change between letters by means of the arrow  
buttons left and right, and then move the DAB  
aerial until an ‘ensemble’ name appears in the  
menu.  
What’s on the DYNAMIC RANGE CONTROL  
menu …  
DYNAMIC RANGE CONTROL  
OFF  
MIDDLE  
MAX  
For certain DAB programs, you can adjust audio  
signal compression with the DRC (Dynamic Range  
Control) function. Compression compensates for  
sources of noise in your immediate surroundings.  
There are twelve possible settings, with three  
values to guide you:  
...........................................................................  
OFF (no compression)  
GO  
store  
MIDDLE (recommended by the DAB provider)  
MAX (maximum compression, twice that  
recommended by the DAB provider).  
Digital Audio Broadcast (DAB) providers broadcast  
programs in groups called ensembles. A channel  
contains a single ensemble, and an ensemble  
typically contains 5–10 programs. Some DAB  
providers call an ensemble a ‘multiplex’, or call a  
program a ‘service’.  
DAB BAND III  
DAB DRC menu settings have no effect for programs  
not broadcast with DRC.  
174.928MHz  
239.200MHz  
5A 5B 5C 5D 6A - - -  
Channels  
- - - 12A 12B 12C 12D - - - 13F  
DR NEWS  
DR SOFT  
DR ROCK  
…
…
…
…
Ensemble  
…
DR BOOGIE  
DR SPORT  
Re-tune or add programs  
26  
You can make your television find  
your TV and radio programs for you.  
Re-tune via automatic tuning  
You can re-tune all your TV and radio  
programs by letting the television tune in all  
the programs automatically.  
TV SETUP  
PROGRAM GROUPS  
Preset up to 99 different TV and  
radio programs on program numbers  
of their own and give each program  
a distinct name.  
TV TUNING  
EDIT PROGRAMS  
TUNING  
TIMER RECORDING  
PLAY TIMER  
> Press TV to switch on the television, or RADIO  
to switch on the radio.  
ADD PROGRAM  
AUTO TUNING  
MANUAL TUNING  
LINK FREQUENCY  
OPTIONS  
STAND POSITIONS  
> Press MENU to bring up the SETUP menu and  
press to highlight TUNING.  
EDIT PROGRAMS  
ADD PROGRAM  
AUTO TUNING  
You can tune in new programs, for  
example, if you move – or re-tune  
previously deleted programs.  
> Press GO to bring up the TUNING menu and  
press to highlight AUTO TUNING.  
> Press GO to bring up the AUTO TUNING menu.  
> Press to start auto tuning.  
1 DR1  
2 TV2  
3 .  
.
.
select  
GO  
select  
When tuning in programs via the  
ADD PROGRAM menu, your  
> Once auto tuning is completed, the EDIT  
PROGRAMS menu appears. You can then  
rearrange the program order, delete programs  
or rename them.  
TV AUTO TUNING  
. . . . . . . .  
1
previously tuned programs are left  
unchanged. This allows you to keep  
program names, their order in the TV  
or radio lists, and any special settings  
you may have stored for those  
programs, such as decoder or  
broadcast system settings.  
DELETES PROGRAM GROUPS  
start  
TV AUTO TUNING  
DR1  
1
2
3
TV2  
. . . . . . . .  
EDIT TV PROGRAMS  
DR1  
1
2
3
4
5
6
7
8
9
TV2  
. . . . . . . .  
EUROSPRT  
ZDF  
RTL7  
. . . . . . . .  
BBC  
. . . . . . . .  
. .  
. .  
17 NRK  
18 TV4  
more  
name  
move  
Please note: If you re-tune all your TV and radio  
programs, all Groups of programs and program  
settings, you have made, disappear!  
27  
Add new programs  
You can add a new program or update a  
tuned program which, for example, has been  
moved by the broadcaster.  
TV SETUP  
PROGRAM GROUPS  
TUNING  
TV TUNING  
EDIT PROGRAMS  
TIMER RECORDING  
PLAY TIMER  
> Press TV to switch on the television, or RADIO  
to switch on the radio.  
ADD PROGRAM  
AUTO TUNING  
OPTIONS  
> Press MENU to bring up the SETUP menu and  
press to highlight TUNING.  
STAND POSITIONS  
MANUAL TUNING  
LINK FREQUENCY  
EDIT PROGRAM  
ADD PROGRAM  
AUTO TUNING  
> Press GO to bring up the TUNING menu and  
press to highlight ADD PROGRAM.  
> Press GO to bring up the ADD PROGRAM menu.  
> Press to start. New programs are added  
automatically as they are found.  
19 . . . . . . . .  
20 . . . . . . . .  
21 . . . . . . . .  
select  
GO  
select  
> When tuning is completed and new programs  
have been added, the EDIT PROGRAMS menu  
appears. You can then rearrange the program  
order, delete programs or rename them. The  
cursor highlights the first new program of those  
just added to the list.  
ADD TV PROGRAM  
10 . . . . . . . .  
11 . . . . . . . .  
12 CNN  
13 N3  
14 . . . . . . . .  
15 SAT 1  
16 SVT 2  
17 NRK  
18 TV4  
19 . . . . . . . .  
start  
Set positions for the television to turn to  
28  
Choose one position for when you switch the  
If your television is equipped with the  
optional motorised stand, you can  
turn it using the Beo4 remote control.  
TV SETUP  
television on, one for radio and one for when  
you switch it off.  
PROGRAM GROUPS  
TUNING  
TIMER RECORDING  
PLAY TIMER  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight STAND POSITIONS.  
> Press GO to bring up the STAND POSITIONS  
menu.  
Furthermore, you can program the  
television to turn automatically to  
face your favourite viewing position  
when you switch on the television,  
turn to a different position when you  
listen to radio, and turn away to a  
standby position when you switch it  
off.  
OPTIONS  
STAND POSTIONS  
STAND POSITIONS  
VIDEO  
TV ON  
AUDIO  
TV STANDBY  
STANDBY  
> Press GO to determine the VIDEO position.  
> Press or to turn the television, and place it  
according to your viewing position.  
> Press GO to store the position.  
selec
To store a stand position for when the radio  
is switched on …  
You can also turn your television by  
hand.  
GO  
select  
> Press to move to AUDIO.  
> Press GO to determine the AUDIO position.  
> Press or to turn the television, and place it  
as you wish.  
To store a stand position for when the  
television is switched off and in standby …  
> Press to move to STANDBY.  
> Press GO to store the position.  
> Press GO to determine the STANDBY position.  
> Press or to turn the television, and place it  
as you wish.  
> Press GO to store the position.  
> Press EXIT to leave the menus.  
NOTE! For information about first-time installation  
of the motorised stand, refer to the chapter ‘First-  
time setup of your television’ on page 16.  
Set the time and date  
29  
Before synchronising the clock with a tuned  
program, make sure that the program you  
are watching offers a teletext service.  
When you preset your television to  
switch itself on or off at a particular  
time, or when you preset a timed  
recording of a programme on a  
connected video recorder, the clock  
ensures that these features are  
switched on and off at the right  
times.  
TV SETUP  
PROGRAM GROUPS  
TUNING  
TIMER RECORDING  
PLAY TIMER  
OPTIONS  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
OPTIONS  
CONNECTIONS  
STAND POSITIONS  
> Press GO to bring up the OPTIONS menu and  
press to highlight CLOCK.  
SOUND  
PICTURE  
CLOCK  
CONNECTIONS  
SOUND  
PICTURE  
> Press GO to bring up the CLOCK menu.  
> Press or to see your choices for each item.  
> Press or to move through menu items. It is  
only necessary to enter the time manually if  
SYNCHRONISE is set to NO.  
MENU LANGUAGE  
select  
TIME  
DATE  
MONTH  
The simplest way to set the clock is to  
synchronise it with a tuned TV  
program’s teletext service via the  
CLOCK menu. If you choose to  
synchronise the clock, this is done  
with the teletext service offered by  
the TV program you are currently  
watching. If a teletext service is not  
available, you can set the clock  
manually.  
GO  
select  
> Press GO to store your clock and calendar  
options, or …  
CLOCK  
TIME  
20:00  
23  
> … press EXIT to exit all menus without storing.  
DATE  
MONTH  
APR  
2001  
NO  
If the clock is not updated in the transition between  
summer and winter time, simply select the program  
with which you originally synchronised the clock,  
and the clock is updated.  
YEAR  
SYNCHRONISE  
SHOW CLOCK  
YES  
GO  
store  
Abbreviations for months  
To bring up the clock in the display, press  
LIST repeatedly to display CLOCK* on  
Beo4, then press GO. To remove the clock  
again, repeat the procedure.  
Jan … January  
Feb … February  
Mar … March  
Apr … April  
Jul … July  
Aug … August  
Sep … September  
Oct … October  
May … May  
Nov … November  
Dec … December  
Jun … June  
*NOTE! In order to display CLOCK on Beo4, you  
must first add it to the Beo4 list of functions. For  
further information, refer to the chapter  
‘Customise Beo4’ on page 66.  
Adjust picture and sound settings  
30  
Picture and sound settings are preset  
from the factory to neutral values  
which suit most viewing and listening  
situations. However, if you wish, you  
can adjust these settings to your  
liking.  
Change brightness, colour or contrast  
Adjust the picture settings via the PICTURE  
menu. Temporary settings are cancelled  
when you switch off the television.  
TV SETUP  
PROGRAM GROUPS  
TUNING  
TIMER RECORDING  
PLAY TIMER  
OPTIONS  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
OPTIONS  
CONNECTIONS  
STAND POSITIONS  
Adjust picture brightness, colour or  
contrast. Sound settings include  
volume, bass and treble.  
> Press GO to bring up the OPTIONS menu and  
press to highlight PICTURE.  
CONNECTIONS  
SOUND  
PICTURE  
SOUND  
PICTURE  
CLOCK  
> Press GO to bring up the PICTURE menu.  
> Press or to move through menu items.  
> Press or to adjust the values.  
MENU LANGUAGE  
select  
BRIGHTNESS  
CONTRAST  
COLOUR  
Store your picture and sound settings  
temporarily – until your television is  
switched off – or store them  
permanently.  
> Press EXIT to store your settings until you  
switch off the television, or …  
GO  
select  
> … press GO to store your settings permanently.  
PICTURE  
BRIGHTNESS  
CONTRAST  
COLOUR  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
To temporarily remove the picture from the screen,  
press LIST repeatedly to display P.MUTE on Beo4,  
then press GO. To restore the picture again, press  
any source button, such as TV.  
For information about how to change  
the picture format, refer to the Guide  
page 9.  
TINT  
GO  
store  
What’s on the PICTURE menu …  
BRIGHTNESS … Adjusts the picture brightness.  
CONTRAST … Adjusts the contrast level in the  
picture.  
COLOUR … Adjusts the colour intensity in the  
picture.  
For video sources using the NTSC signal, a fourth  
option – Tint (colour shade or nuance) – will be  
available for adjustment.  
31  
Change volume, bass or treble  
Adjust the sound settings via the  
What’s on the SOUND SETUP/SOUND  
ADJUSTMENT menu …  
TV SETUP  
PROGRAM GROUPS  
SOUND SETUP menu. Temporary settings are  
cancelled when you switch off the television.  
VOLUME … Adjusts the volume level the TV uses  
when you switch it on.  
TUNING  
TIMER RECORDING  
PLAY TIMER  
OPTIONS  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
(CENTRE) … Only available if you have connected  
loudspeakers to the television. Adjusts the  
balance between the external and internal  
speakers.  
OPTIONS  
CONNECTIONS  
STAND POSITIONS  
> Press GO to bring up the OPTIONS menu and  
press to highlight SOUND.  
CONNECTIONS  
SOUND  
PICTURE  
SOUND  
PICTURE  
CLOCK  
(BALANCE) … Adjusts the balance between the  
speakers.  
> Press GO to bring up the SOUND menu.  
> Press or to move through menu items.  
> Press or to adjust the values or choose a  
setting.  
MENU LANGUAGE  
select  
BASS … Adjusts the bass level.  
VOLUME  
BALANCE  
BASS  
TREBLE … Adjusts the treble level.  
LOUDNESS … The loudness feature compensates  
for the human ear’s lack of sensitivity to high  
and low frequencies. These frequencies are  
boosted at low volume levels so that low music  
becomes more dynamic. Loudness can be set to  
ON or OFF.  
GO  
select  
> Press EXIT to store your settings until you switch  
off the television, or …  
SOUND SETUP  
> … press GO to store your settings permanently.  
VOLUME  
BALANCE  
BASS  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
NO  
If you connect loudspeakers or headphones …  
The content of the SOUND menu varies according  
to what you have connected to the television.  
TREBLE  
The contents of this menu varies according to your  
speaker setup.  
LOUDNESS  
GO  
store  
Choose menu language  
32  
You can select the language for on-screen  
menus via the TV SETUP menu. The text on  
the screen changes as you move from  
language to language.  
The menu language you choose  
during the first-time setup of your  
television can be changed at any  
time.  
TV SETUP  
PROGRAM GROUPS  
TUNING  
TIMER RECORDING  
PLAY TIMER  
OPTIONS  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
OPTIONS  
CONNECTIONS  
Once a menu language is chosen, all  
menus and display messages are  
shown in this language.  
STAND POSITIONS  
CONNECTIONS  
SOUND  
PICTURE  
SOUND  
PICTURE  
CLOCK  
> Press GO to bring up the OPTIONS menu and  
press to highlight MENU LANGUAGE.  
> Press GO to bring up the MENU LANGUAGE  
menu.  
MENU LANGUAGE  
select  
DANSK  
DEUTSCH  
ENGLISH  
> Use and to move to your language choice.  
> Press GO to make your choice.  
GO  
select  
> Press STOP to back up through previous menus  
or press EXIT to exit all menus directly.  
MENU LANGUAGE  
DANSK  
DEUTSCH  
ENGLISH  
ESPAÑOL  
FRANÇAIS  
ITALIANO  
NEDERLANDS  
SVENSKA  
GO  
select  
accept  
Choose radio display  
33  
> Press RADIO to switch on the radio.  
> Press MENU to bring up the RADIO SETUP  
menu and press to highlight TUNING.  
> Press GO to bring up the RADIO TUNING menu  
and press to highlight RADIO DISPLAY.  
> Press GO to bring up the RADIO display menu.  
> Press or to change the settings.  
You can change the radio display at  
any time. Your choice determines  
what is shown on the screen, when  
you select radio as your source.  
RADIO SETUP  
TUNING  
RADIO TUNING  
EDIT PROGRAMS  
TIMER RECORDING  
PLAY TIMER  
ADD PROGRAM  
AUTO TUNING  
MANUAL TUNING  
RADIO DISPLAY  
ADJUST DAB AERIAL  
DAB DRC  
OPTIONS  
STAND POSITIONS  
When you change the radio display  
style in the RADIO DISPLAY menu, a  
sample of the display style is shown  
in the menu.  
EDIT PROGRAMS  
ADD PROGRAMS  
AUTO TUNING  
> Press GO to store your choice.  
> Press STOP to back up through previous menus  
or press EXIT to exit all menus directly.  
select  
GO  
select  
What’s on the RADIO DISPLAY menu …  
STYLE … Select the display settings for when you  
listen to radio. Options are:  
RADIO DISPLAY  
MAXIMUM  
STYLE  
MAXIMUM … Shows text sent out by the  
broadcaster continuously, as well as radio  
program number, name of the radio program,  
frequency or ‘ensemble’ name.  
GERNO VERSI FOLLOW EPIUM  
RADIO  
3
BBC CLASSIC  
BBC National DAB  
TIME OUT … Shows the maximum display but  
removing the display when the text sent out by  
the broadcaster has been shown once*.  
MINIMUM … Shows the radio program number  
and the name of the radio program.  
GO  
store  
OFF … No display in radio mode.  
*NOTE! If you have chosen the radio display style  
‘TIME OUT’, you can bring up the radio display  
briefly on the screen by pressing GO,  
34  
Placement, sockets and connections  
35  
In this chapter, you can find out how  
to place and connect your television.  
It also gives you an overview of the  
socket panels.  
Advanced operation, 5  
All you need to know about using your television beyond daily use, such as how to  
operate timed play and timed standby functions, and a connected set-top box. How  
to operate a surround sound system.  
We recommend that you follow the  
procedure described below when  
you set up your television:  
– Unpack the television  
Tuning and preference settings, 15  
Find out how to set up your television for the first time and tune in programs. This  
chapter also contains information about settings for time, date, stand positions,  
picture and sound.  
– Consider the appropriate  
surroundings for your television  
– Mount the television on the  
chosen stand or bracket  
Placement, sockets and connections, 35  
•
•
•
•
•
•
Set up your television, 36  
Camera and headphones sockets, 39  
Socket panel, 40  
– Place the television  
Connect additional video equipment, 42  
Register additional video equipment, 46  
Loudspeaker setup – surround sound, 48  
– Connect the cables, additional  
equipment, and speakers  
This procedure is described in detail  
on the following pages.  
BeoLink system, 55  
Find out how to connect an audio system to your television and operate an integrated  
audio/video system. Find out how to make link connections, operate a link system  
and set up your television in a link room. How to customise Beo4 to your system.  
Index, 68  
Set up your television  
36  
Handling your television  
For information about how to fasten  
and run the cables on the rear of the  
television, refer to page 38.  
– Avoid placing your television in direct sunlight  
or direct artificial light, such as a spotlight, as  
this may reduce the sensitivity of the remote  
control receiver. Also if the screen is overheated,  
black spots may appear in the picture. These  
spots disappear again, once the television cools  
down to normal temperature.  
For further information about the  
socket panel, refer to page 40.  
– To avoid injury, use Bang & Olufsen stands or  
brackets only.  
– Make sure that the television is set up, placed  
and connected in accordance with these  
instructions.  
If you have a motorised stand, leave enough space  
around the television to allow it to turn freely. The  
television can also be turned by hand.  
– The television is developed for indoor use in dry,  
domestic environments only. Use within a  
temperature range of 10–40°C (50–105°F).  
– Do not place any items on top of the television.  
– Always place your television on a firm and  
stable surface.  
– Do not attempt to open the television. Leave  
such operations to qualified service personnel.  
Overview of socket panels  
1 Cover for fastening bracket for the optional  
stand and wall bracket. Pull out at the bottom  
to remove the cover.  
1
5
2 Main socket panel. Refer to page 40 for further  
information.  
2
6
3
3 Cover for DVI socket for connection of a  
computer. Refer to page 41 for further  
information.  
4 Cover for main socket panel. Pull out at the  
bottom to remove the cover.  
4
7
5 Cover for optional card reader for access to DVB  
programs.  
6 Cover for camera and headphones sockets.  
Push in to open, push again to close.  
7 Cable groove. It is important that the cables are  
lead through the groove and tied with a cable  
tier, as the cables can otherwise be tugged free  
of the sockets. Refer to page 38 for further  
information.  
37  
Placement options  
The television can be placed in several ways, some  
are illustrated to the right. Please contact a Bang  
& Olufsen retailer for further information.  
If you mount the television on one of the  
motorised stands or on the wall bracket, you can  
tilt the television up and down, as well as turn it  
left and right. Note, however, that tilting can only  
be done manually.  
While mounting the television on the base, stand  
or wall bracket, you can use the packaging to  
support the products. This makes mounting easier.  
For further information, refer to the Guide  
enclosed with these accessories.  
Attaching the speaker cover: Hold up the  
speaker cover slightly to the right of the ‘brackets’  
a and b. Now slide the cover to the left to let the  
‘attach-points’ engage with the corresponding  
‘brackets’ (a, b and c) on the television.  
To remove the cover; use your thumb to push the  
cover to the right to disengage it, then lift it out.  
c
c
c
c
a
b
c
c
c
>> Set up your television  
38  
Aerial and mains connections  
When you set the television up on its own,  
simply connect the TV aerial to the TV socket  
and a FM aerial to the socket marked FM and  
connect the television to the mains as shown  
to the right.  
If your television is equipped with the  
optional DAB module, you must connect a  
DAB aerial also.  
When using a DAB aerial …  
– Use the DAB AERIAL ADJUSTMENT menu,  
described on page 23, to find out where to  
place your aerial. The menu lets you know how  
strong the DAB signal is.  
TV  
DAB  
FM  
– Make sure that you hang or mount the aerial  
vertically.  
If you are going to connect speakers, an audio  
system or any other equipment to the television,  
do not connect it to the mains yet!  
When connections are complete and the cables  
have been secured as described on this page,  
switch on the mains. A tiny, red light appears  
below the screen. The system is in standby mode  
and ready to be used. If your television is set up  
IMPORTANT! All the cables must be fastened to  
the television using the enclosed cable tier as  
shown.  
The supplied mains cord and plug are specially  
designed for the television. If you change the plug  
When you have made all the connections and  
fastened the cables, mount the cable cover again.  
or in any way damage the mains cord, it will affect on its own, you can now tune in programs as  
the TV picture adversely!  
explained in the chapter ‘First-time setup of your  
television’ on page 16.  
Your television was designed to be left in standby  
mode when not in use. Therefore, to facilitate  
remote control operation, it is essential that you  
do not disconnect it from the mains. The  
television can only be switched off completely, if  
you disconnect it from the mains.  
Camera and headphones sockets  
39  
You can connect headphones and  
listen to a programme, or you can  
connect a Camcorder and watch your  
home movies on the television. If you  
have connected a BeoCord V 8000  
video tape recorder, you can copy  
Camcorder recordings onto a  
videotape.  
Sockets for temporary connections  
PHONES  
You can connect stereo headphones to the socket  
marked PHONES. The television speakers are  
muted when headphones are connected and  
activated again when the headphones are  
disconnected.  
PHONES  
VIDEO  
R
L
These sockets are for the connection of a  
Camcorder:  
VIDEO  
Watch and copy from a Camcorder  
For the video signal.  
If you have connected a video tape recorder, such  
as a BeoCord V 8000, to your television, and you  
connect your Camcorder, you can copy Camcorder  
recordings onto a videotape.  
R – L  
For audio connection (right and left sound channel  
respectively).  
To copy a recording from a Camcorder …  
> Connect your Camcorder and start playback on  
the Camcorder. The television automatically  
registers the signal and you can see the pictures  
on the television screen.  
Watch digital pictures on your television  
To watch your camera pictures, connect the camera  
and switch the television on. The television auto-  
matically registers the signal and you can see the  
still pictures on the screen.  
> Press RECORD twice to start recording.  
If the signal from the camera is switched  
off …  
Choosing another source or switching off the tele-  
vision during recording from a Camcorder disrupts  
recording. It is not possible to view TV programs  
during recording.  
> Press LIST repeatedly to display CAMERA on  
Beo4 and press GO.  
In order to display CAMERA on Beo4, you must  
first add it to the Beo4 list of functions. For further  
information, refer to the chapter ‘Customise Beo4’  
on page 66.  
Socket panel  
40  
The socket panel on your television  
allow you to connect signal input  
cables as well as a variety of extra  
equipment, such as a video recorder  
or a linked Bang & Olufsen music  
system.  
Sockets on the rear panel  
AV3  
L
Left, line signal (for sound from PC).  
STAND  
R
L
Right, line signal (for sound from PC).  
AV2  
AV1  
AV3  
R
Y – Pb – Pr  
The AV sockets are the primary  
sockets for connection of extra  
equipment. Any equipment you  
connect to these sockets must be  
registered in the CONNECTIONS  
menu. For further information, refer  
to the chapter ’First-time setup of  
your television’ on page 16.  
Y
For connection of external equipment.  
Pb  
Pr  
LINK  
Aerial output socket for distribution of video  
signals to other rooms. Requires an RF Link  
Amplifier also.  
DAB  
FM  
MASTER LINK  
POWER LINK  
TV  
IR-  
OUT  
LINK  
DVB DATA  
For service use.  
~
DVBS  
DATA  
FRONT  
FRONT  
A 1  
You can also connect a computer and  
use your television as a monitor.  
Connections to the mains.  
DAB  
Aerial input socket for DAB aerial. Only available if  
your television is equipped with the optional FM/  
DAB module.  
REAR  
SUBWOOFER  
REAR  
A 2  
AV1 (AV VMEM)  
TV  
21-pin socket for the connection of a Bang &  
Olufsen video recorder, a set-top box, a decoder  
or another video tape recorder. You can also  
connect other types of extra equipment.  
Aerial input socket from your external aerial or  
cable TV network, or from your main room  
television if this television is placed in a link room.  
FM/DVB  
MASTER LINK  
Aerial input socket from your FM or DVB aerial.  
Only available if your television is equipped with  
the optional FM module or DVB module.  
Socket for connection of a compatible Bang &  
Olufsen music system.  
The socket is also used for BeoLink distribution of  
sound throughout the house.  
STAND  
For connection of a motorised stand.  
POWER LINK  
For connection of external Bang & Olufsen loud-  
speakers.  
AV2 (AV)  
21-pin socket for the AV connection of other  
equipment, such as a DVD player, a set-top box, a  
second decoder or a game console.  
The socket may be used for an AV 2 Expander  
instead, which gives the opportunity to connect  
other non-Bang & Olufsen video equipment at the  
same time.  
IR out  
For a connected set-top box.  
41  
Computer connection – DVI socket  
The speaker and digital sockets mentioned  
below are only available, if your television is  
equipped with the optional Surround Sound  
module:  
Disconnect the television, the computer, and  
all equipment connected to the computer  
from the mains.  
DVI  
Using the appropriate type of cable, connect  
one end to the DVI or VGA output socket on  
your computer, and the other end to the DVI  
socket on the television.  
REAR  
The two sockets are used for connecting the  
external rear speakers in a surround sound setup.  
DVI  
DVI connection for receiving digital or analogue  
graphics from an external PC. Supports the  
following resolutions: 60 Hz; 640 × 480, 800 × 600,  
848 × 480, 1024 × 576, 1024 × 768, 1280 × 720,  
1360 × 768.  
FRONT  
To hear sound from the computer in the tele-  
vision speakers, use the appropriate cable and  
The two sockets are used for connecting the  
external front speakers in a surround sound setup. connect the sound output on the computer  
to the L – R sockets on the television.  
SUBWOOFER  
IMPORTANT! If you wish to connect a computer to  
the television and use the television as a monitor,  
make sure that the television, the computer, and  
all equipment connected to the computer are all  
disconnected from the mains before you connect  
the computer and the television to each other.  
Socket used for connecting a BeoLab 2 subwoofer Reconnect the television, the computer, and  
in a surround sound setup.  
all equipment connected to the computer to  
the mains.  
A1 – A2  
For digital sound input from external equipment  
connected to an AV socket group.  
In addition, the computer must be connected to a  
grounded wall outlet as specified in the computer’s  
setting-up instructions.  
If you have connected HD equipment to your  
television, some video functions are affected:  
– The Set-top Box Controller menu described  
on page 8 does not appear;  
– If you have selected FORMAT 2 for letter-box  
pictures as described on page 11 in the  
Guide, you cannot scroll the picture up or  
down;  
– You cannot distribute sound or picture from  
a HD source to a product in a link room;  
– You cannot record an HD source, unless your  
HD equipment also provides a Standard  
Definition (SD) signal;  
Connect additional video equipment  
42  
Connect a decoder  
This chapter describes how to  
connect additional video equipment  
to the television.  
BeoCenter  
Primary decoder  
A decoder can be connected to the  
television via the AV2 socket. If your  
setup also includes a Bang & Olufsen  
video recorder, you should connect  
the decoder to the video recorder.  
Secondary decoder  
A set-top box can be connected to  
any of the AV sockets.  
When you connect a Bang & Olufsen  
video recorder, you must connect it  
to the AV1 socket, the television  
detects the connection automatically.  
Disconnect all involved systems from the  
mains before you connect external  
equipment.  
Tuned programs and decoder detection  
In most cases, a connected decoder is registered  
automatically during tuning. The decoder should  
automatically detect those programs which  
> Connect the cable from the external aerial to  
the socket marked TV on the television.  
> Connect the decoder to the 21-pin AV1 socket  
on the television’s socket panel.  
require decoding. However, if this is not the case,  
then adjust the setting via the MANUAL TUNING  
menu for the program in question. Please refer to  
the section entitled ‘Adjust tuned TV programs’ in  
the chapter ‘Edit tuned programs’ on page 23.  
Make sure that all connected  
equipment is registered in the  
CONNECTIONS menu. For further  
information, refer to the chapter  
‘Register additional video equipment’  
on page 46.  
If you wish to connect an RF decoder, connect the  
external aerial cable to the decoder input socket  
and then forward the signal or cable to the  
television’s aerial socket (marked ‘TV IN’).  
43  
Connect a set-top box  
Disconnect all involved systems from the  
mains before you connect external  
equipment.  
BeoCenter  
Set-top box  
> Connect one end of a 21-pin AV cable to the  
set-top box.  
> Run the cable to the AV1 or AV2 socket on the  
back of the television.  
> Connect the IR transmitter to the IR OUTPUT  
socket on the television.  
> If your set-top box delivers HDTV video signal,  
and your television is HD-ready, connect the set-  
top box to either the DVI-I or Y-Pb-Pr sockets  
also.  
> Fasten the IR transmitter to the IR receiver of  
the set-top box.  
Automatic standby …  
Set-top boxes must be set up in accordance with  
When you register a set-top box in the  
CONNECTIONS menu, you can also select an  
the documentation enclosed with them.  
To be able to use the remote control included with ‘AUTO STANDBY’ time for your set-top box. This  
*If you switch the television to standby before the  
30 minutes have passed, the set-top box is also  
switched to standby.  
your set-top box, do not cover its IR receiver  
entirely.  
means that you can select if the connected set-top  
box should switch to standby automatically.  
The options are:  
AFTER 0 MIN … The set-top box switches to stand-  
by immediately when you select another source.  
AFTER 30 MIN … The set-top box switches to stand-  
by 30 minutes after you have selected another  
source*.  
AT TV STANDBY … The set-top box switches to  
standby when you switch the television to stand-  
by.  
NEVER … The set-top box does not switch to stand-  
by automatically.  
FOLLOW TV … The set-top box switches on,  
when you switch your television on and it  
switches to standby, when you switch your  
television to standby.  
>> Connect additional video equipment  
44  
Connect a Bang & Olufsen recorder  
BeoCenter  
Video recorder  
Disconnect all involved systems from the mains  
before you connect external equipment.  
BeoCord V 8000  
If you connect a BeoCord V 8000 to your tele-  
vision, some of the features of the BeoCord  
> Connect one end of a 21-pin AV cable to the AV V 8000 function differently than described in the  
socket on the rear of the recorder.  
> Then run the cable to the AV 1 socket on the  
back of the television.  
BeoCord V 8000 Guide, and some are not avail-  
able. A supplement for the BeoCord V 8000 Guide  
is available from you Bang & Olufsen retailer.  
Aerial connection  
Use your external aerial connection (or cable TV  
network connection) and the aerial cable supplied  
with the video recorder.  
> Connect the cable from your external aerial to  
the signal input socket marked  
panel of the recorder.  
on the rear  
> Direct the aerial signal to the television, using  
the aerial cable supplied with the recorder.  
> Plug one end into the socket marked ‘TV’ on  
the recorder and the other end into the aerial  
socket marked ‘TV’ on the television’s socket  
panel.  
45  
Register additional video equipment  
46  
If you connect additional video  
equipment to your television, you  
must register the equipment in the  
CONNECTIONS menu.  
What is connected?  
Registering the equipment connected to the  
television enables you to activate it with the  
TV SETUP  
PROGRAM GROUPS  
TUNING  
Beo4 remote control.  
TIMER RECORDING  
PLAY TIMER  
When the system is first set up, the  
equipment connected at that  
particular moment is detected by the  
television, and the CONNECTIONS  
menu appears automatically on the  
screen. If you connect equipment at  
a later date, on a permanent basis,  
then you must register this  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
OPTIONS  
OPTIONS  
CONNECTIONS  
STAND POSITIONS  
> Press GO to bring up the OPTIONS menu.  
CONNECTIONS is highlighted already.  
> Press GO to call up the CONNECTIONS menu.  
> Press or to step between the different  
sockets: AV1, AV2 and AV3.  
SOUND  
PICTURE  
CLOCK  
CONNECTIONS  
SOUND  
PICTURE  
BEOLINK  
select  
MENU LANGUAGE  
AV1  
AV2  
> Press GO to be able to register a connected  
product to the highlighted socket.  
GO  
select  
> Press or to move between the types of  
sockets.  
equipment in the CONNECTIONS  
menu.  
CONNECTIONS  
> Press or to register what you have  
connected to the highlighted socket.  
> Press GO to be able to select another AV socket.  
> When you have completed your settings, press  
STOP to back up through previous menus or  
press EXIT to exit all menus directly.  
AV1  
AV2  
AV3  
V. MEM  
NONE  
For information about where and  
how to connect extra equipment,  
refer to the previous pages and the  
chapter ‘Socket panel’ on page 40.  
NONE  
GO  
store  
If, for some reason, you disconnect the extra  
equipment and then disconnect the television from  
the mains, you may have to register the equipment  
again upon reconnection, even if you have not  
changed your setup of extra equipment.  
47  
When you have connected additional video  
equipment to your television, you must also  
‘tell’ the system if you have made additional  
connections, such as connecting a digital  
sound input, a digital video signal or an IR  
transmitter.  
AV 2  
NONE … if no equipment is connected.  
STB SETUP  
NOKIA 96025  
NOKIA 9820T  
NOKIA 9850T  
PACE DTR730-IM  
SKY DIGITAL  
EXPANDER … if you have connected an  
Expander box with other auxiliary equipment  
connected to it.  
SELECTOR  
CANALdig DK/S/N  
MACAB DCB-101  
TPS 96573D  
V.AUX … if you have connected any other type  
of auxiliary equipment.  
+
CANAL SAT r2  
Planet PL 9000  
What’s on the CONNECTIONS menu …  
AV 1  
DVD … if you have connected a DVD player or  
similar devices.  
CANALdigital  
ECHOSTAR 9000  
CANALdigital  
I
E
NONE … if no equipment is connected.  
V.MEM … if you have connected a Bang &  
Olufsen video recorder or any other video  
recorder.  
STB … if you have connected a set-top box.  
HDTV … if the source connected to this AV socket  
delivers HDTV, select which socket is used for  
HDTV; Options are: YPbPr, DVI or NO.  
TV BOX 1000-S  
CANALdigital NL  
NOKIA D-BOX  
NOKIA D-BOX II  
HUMAX F1-VACI  
TechniBox CAM1  
V.MEM+DECODER … if you have connected a  
Bang & Olufsen video recorder with a decoder  
connected to it.  
GO  
store  
AV 3  
NONE … if no equipment is connected.  
PC … if you have connected a PC.  
STB … if you have connected a set-top box.  
HDTV* … if you have connected audio sound to  
one of the audio sockets; Options are A1 or A2.  
If you have connected a set-top box, you will be  
prompted to select your set-top box from an on-  
screen list when you select STB in the CONNECTIONS  
menu.  
V.MEM+STB … if you have connected a Bang &  
Olufsen video recorder with a set-top box  
connected to it.  
DECODER … if you have connected a decoder.  
V.AUX … if you have connected any other type  
of auxiliary equipment.  
* This option is only available if your television is  
equipped with the optional surround sound  
STB … if you have connected a set-top box.  
HDTV … if the source connected to this AV socket module.  
delivers HDTV, select which socket is used for  
HDTV; Options are: YPbPr, DVI or NO.  
If you connect a Bang & Olufsen video recorder,  
the only options for AV 1 are: V.MEM,  
V.MEM+STB and V.MEM+DECODER.  
Loudspeaker setup – surround sound  
48  
If your television is equipped with the  
optional surround sound module,  
you can create a surround sound  
setup.  
Place external speakers  
The three illustrations to the right show  
examples of how you can place the television  
and speakers.  
A surround sound setup fits easily  
into your living room. Let the picture  
determine your ideal listening and  
viewing position. You get the best  
sound experience in the area created  
by the speakers.  
The following guidelines apply for all speaker  
setups:  
– If you have two different sets of speakers,  
always use your most powerful speakers as  
front speakers.  
– Place your speakers where you want them  
before you connect them.  
– Place your rear speakers on either side behind  
your favourite listening position.  
This chapter explains how to set up  
speakers for surround sound, as well  
as how to make the adjustments  
necessary to get the best sound.  
– You do not necessarily have to place the  
speakers in the corners of the room.  
– If you want to connect a BeoLab 2 subwoofer,  
refer to the subwoofer’s own Guide.  
49  
Connect speakers  
Connect Bang & Olufsen speakers and a  
BeoLab 2 subwoofer to the connection panel  
at the back of the television. The speakers  
must be Bang & Olufsen Power Link speakers.  
L
R
FRONT  
To connect speakers…  
> Use the cables enclosed with the speakers.  
> Connect the two front speakers to the sockets  
marked FRONT.  
SUBWOOFER  
> Connect the two rear speakers to the sockets  
marked REAR.  
L
R
> Connect the subwoofer to the socket marked  
SUBWOOFER.  
You can loop the signals from speaker to speaker  
(as described in the Guide enclosed with your  
speakers), or you can connect each speaker to a  
socket. Longer cables and adaptors are available  
from your Bang & Olufsen retailer.  
REAR  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
SPEAKER TYPE  
BEOLAB 1  
Remember to set the L–R–LINE switch on both the  
front and rear set of speakers to L or R (left and  
right channel) to indicate their position in each set.  
Set the left speakers to L and the right speakers  
to R.  
FRONT  
> Press GO to bring up the OPTIONS menu and  
press to highlight SOUND.  
REAR  
BEOLAB 6000  
YES  
SUBWOOFER  
> Press GO to bring up the SOUND SETUP menu  
and press to highlight SPEAKER TYPE.  
> Press GO to bring up the SPEAKER TYPE menu.  
> Press or to reveal your speaker type and to  
move on to the next speaker set. Choose NONE  
if no speakers are connected.  
GO  
store  
> If you have a BeoLab 2 subwoofer, press to  
move the cursor to SUBWOOFER and press to  
change the field to YES.  
> Press GO to store or EXIT to leave the menu  
without storing.  
>> Loudspeaker setup – surround sound  
50  
Set speaker distance  
Switch on the television from your favourite  
viewing position. Enter the straight-line  
distances in metres between your position  
and the individual speakers.  
CENTRE  
LEFT FRONT  
RIGHT FRONT  
To set the speaker distances …  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
> Press GO to bring up the OPTIONS menu and  
press to highlight SOUND.  
> Press GO to bring up the SOUND SETUP menu  
and press to highlight SPEAKER DISTANCE.  
> Press GO to bring up the SPEAKER DISTANCE  
menu.  
> Press or to move the cursor from speaker  
to speaker and press or to select the  
approximate straight-line distance in metres  
between your viewing position and each of the  
speakers.  
LEFT REAR  
RIGHT REAR  
> When you have entered the appropriate speaker  
distances, press GO to store or press EXIT to  
leave the menu without storing.  
SPEAKER DISTANCE  
CENTRE  
1.0 M  
LEFT FRONT  
1.0 M  
1.0 M  
1.0 M  
1.0 M  
RIGHT FRONT  
RIGHT REAR  
LEFT REAR  
GO  
store  
You do not have to enter a distance for a BeoLab 2  
subwoofer, as the placement of a subwoofer has  
little impact on the sound.  
51  
Calibrate the sound level  
When you have connected speakers in a  
surround sound setup to the television, you  
must perform a speaker calibration.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
SPEAKER LEVEL  
SEQUENCE  
AUTOMATIC  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
> Press GO to bring up the OPTIONS menu and  
press to highlight SOUND.  
LEFT FRONT  
RIGHT FRONT  
RIGHT REAR  
LEFT REAR  
A calibration sound is produced alternately in  
each of the speakers you have connected in  
your surround sound setup. Your task is to  
adjust the sound level from all the connected  
speakers to match the sound level from the  
centre speaker. You can choose whether you  
want the sound sequence to occur  
> Press GO to bring up the SOUND SETUP menu  
and press to highlight SPEAKER LEVEL.  
> Press GO to bring up the SPEAKER LEVEL menu.  
SEQUENCE is highlighted.  
GO  
store  
> Press or to choose between AUTOMATIC  
and MANUAL.  
It is not necessary to calibrate subwoofer sound in  
a surround sound setup. If you still wish to adjust  
subwoofer sound when your speaker calibration is  
complete, refer to the section ‘Sound adjustments’  
on page 52.  
> Press or to adjust the speaker sound and  
or to move to another speaker.  
automatically or manually.  
> When you have adjusted the sound for all the  
speakers in your surround sound setup, press  
GO to store or press EXIT to leave the menu  
without storing.  
Once you have performed your speaker  
calibration, you will only need to re-calibrate  
the speaker sound if you make changes to the  
setup, for example, if you move one or more  
of the speakers.  
The sound level from the television speakers  
functions as your point of comparison with the  
external speakers and can not be adjusted here.  
>> Loudspeaker setup – surround sound  
52  
Sound adjustments  
Sound settings are preset at the factory to  
neutral values which suit most listening  
situations. However, if you wish, you can  
adjust these settings to your liking.  
SOUND ADJUSTMENT  
VOLUME  
....... . . . . .  
....... . . . . .  
....... . . . . .  
....... . . . . .  
NO  
BASS  
TREBLE  
SUBWOOFER  
LOUDNESS  
You can preset levels for sound volume, bass,  
treble and a connected BeoLab 2 subwoofer.  
In addition, you can switch the loudness  
feature on or off. The loudness feature  
compensates for the human ear’s lack of  
sensitivity to high and low frequencies. These  
frequencies are boosted at low volume levels  
so that low music becomes more dynamic.  
GO  
store  
Note that not all items are available if headphones  
are connected.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
> Press GO to bring up the OPTIONS menu and  
press to highlight SOUND.  
> Press GO to bring up the SOUND SETUP menu,  
ADJUSTMENT is highlighted already.  
> Press GO to bring up the SOUND ADJUSTMENT  
menu.  
> Press or to select an item to adjust.  
> Press or to adjust the values or choose a  
setting.  
> Press or to move through menu items.  
> Press EXIT to store your settings until you  
switch off your television.  
> Press GO to store your settings permanently.  
53  
Choose a speaker combination  
While you are watching a movie or  
programme, you can choose the speaker  
combination you wish to switch on, provided  
that the various sound modes are available in  
your system.  
Speaker combinations  
SPEAKER 1 … Sound in the centre speaker only.  
SPEAKER 2 … Stereo sound in the two front  
speakers. The BeoLab 2 subwoofer is active.  
SPEAKER 3 … The centre speaker, front speakers  
and the BeoLab 2 subwoofer are active.  
SPEAKER 4 … Enhanced stereo sound in the front  
and rear speakers. The BeoLab 2 subwoofer is  
active.  
The television may switch on a speaker  
combination automatically. This happens if a  
programme or DVD contains information  
about the number of speakers to be switched  
on. You are still free to choose the speaker  
combination you prefer.  
SPEAKER 5 … Surround sound from all speakers  
including the BeoLab 2 subwoofer. For  
programmes encoded in Surround Sound.  
To choose a speaker combination via Beo4…  
> Press LIST on Beo4 until SPEAKER is shown in  
the Beo4 display.  
If you have connected only two external front  
speakers to the television, you can only choose  
SPEAKER 1–3.  
> Press the number of the speaker combination  
you want. The selected speakers cut in  
automatically.  
> If you want to adjust the sound balance for the  
programme you are watching, press or to  
adjust the balance between the external front  
and rear speakers, and press or to adjust  
the balance between the left and right speakers.  
> Press EXIT to remove SPEAKER from the Beo4  
display and to return to the source you were  
using.  
>> Loudspeaker setup – surround sound  
54  
See the name of the active sound system  
You can see the name of the active sound  
system for a source or programme on the  
screen. However, it is not possible to adjust or  
preset a sound system.  
SOUND SYSTEM  
MONO / STEREO  
> Press MENU to bring up the TV SETUP menu  
and press to highlight OPTIONS.  
> Press GO to bring up the OPTIONS menu and  
press to highlight SOUND.  
GO  
accept  
> Press GO to bring up the SOUND SETUP menu  
and press to highlight SOUND SYSTEM.  
> Press GO to bring up the SOUND SYSTEM  
menu.  
BeoLink system  
55  
All your Bang & Olufsen products can  
be connected in a BeoLink system. A  
complete BeoLink system enables  
you to distribute sound and picture  
from one central source throughout  
the house.  
Advanced operation, 5  
All you need to know about using your television beyond daily use, such as how to  
operate timed play and timed standby functions, and a connected set-top box.  
How to operate a surround sound system.  
Tuning and preference settings, 15  
Find out how to set up your television for the first time and tune in programs. This  
chapter also contains information about settings for time, date, stand positions,  
picture and sound.  
Placement, sockets and connections, 35  
Find out how to handle and place your television and where the sockets are placed.  
Find out how to connect a decoder, set-top box or video recorder to your television  
and how to register extra equipment. How to connect speakers and how to turn  
your television into a surround sound system, including how to choose speaker  
combinations.  
BeoLink system, 55  
•
•
•
•
•
Connect and operate an audio system, 56  
Your television in a link room, 60  
Distribute sound and picture with BeoLink, 62  
Two televisions in the same room, 64  
Customise Beo4, 66  
Index, 68  
Connect and operate an audio system  
56  
If you connect a compatible Bang &  
Olufsen audio system to the  
Connect a radio  
If you connect an audio system to your tele-  
vision, you must enter the BeoLink menu and  
OPTIONS  
television using a Master Link cable,  
you obtain the benefits of an  
integrated audio/video system.  
CONNECTIONS  
SOUND  
set up how the radios should be used:  
PICTURE  
>Press TV to switch on the television  
> Press MENU to bring up the SETUP menu.  
> Press to move to OPTIONS, press GO to call  
up the OPTIONS menu.  
CLOCK  
BEOLINK  
BEOLINK  
Play a CD on your audio system using  
your television speakers, or switch on  
a TV programme and send the sound  
to your audio system speakers.  
MENU LANGUAGE  
LINKED RADIO  
INTERNAL RADIO  
YES  
ENABLE  
LINKED RADIO  
INTERNAL RADIO  
> Press to move to BEOLINK, press GO to call  
up the BEOLINK menu.  
select  
> Press or to move between the menu  
options and press or to change settings.  
Your AV system can be placed  
GO  
store  
together in one room or in two  
rooms with the television placed in  
one room and the audio system with  
a set of speakers placed in another.  
When an audio system is connected to your  
television and the built-in radio is enabled, you  
can choose which radio to use. In general you  
could say that the primary radio is called up by  
means of the RADIO button, whereas you must  
use the AV button to call up the secondary radio.  
If your television is equipped with the  
optional FM or FM/DAB module, you  
can disable it, and then it cannot be  
used as source.  
Not all Bang & Olufsen audio systems  
support integration with the television.  
57  
Option setting  
If your television has been set up in an AV  
system, you may need to set it to the correct  
Option with Beo4. Switch the entire system  
to standby first.  
Option 1  
Option 1  
Option 2  
Option 0  
Option setting for the television  
> While holding the • button on Beo4, press LIST.  
> Let go of both buttons.  
> Press LIST repeatedly to display OPTION? on  
Beo4 and press GO.  
The television and an audio system set up in one  
room – all speakers are connected to the tele-  
vision.  
You can choose to set up your television (with or  
without additional speakers) and the audio system  
(with a connected set of speakers) in the same  
room.  
> Press LIST repeatedly to display V.OPT on Beo4  
and then key in the appropriate number  
(1, 2 or 4).  
Option setting for the audio system  
> While holding the • button on Beo4, press LIST.  
> Let go of both buttons.  
Option 2  
Option 2  
Option 5  
Option 5  
> Press LIST repeatedly to display OPTION? on  
Beo4 and press GO.  
> Press LIST repeatedly to display A.OPT on Beo4  
and then key in the appropriate number (0, 1, 2,  
5 or 6).  
You can choose to set up your audio system in  
one room, and the television (with or without  
additional speakers) in another.  
If you set up your television in a link room where  
an audio system is placed, you must set them to  
Option 5.  
Option 6  
If you set up your television in a link room without  
an audio system, you must set it to Option 6.  
>> Connect and operate an audio system  
58  
Use an integrated audio/video system  
If you integrate your audio system and your  
television, you can choose a speaker  
combination appropriate to the current video  
or audio program, and also record video  
sound on the audio system.  
Video sound recording  
If you listen to sound from your television on your  
Bang & Olufsen audio system’s speakers, and your  
audio system has a tape recorder, you can record  
television sound on the audio tape recorder. Refer  
to the Guide enclosed with your audio system for  
further information.  
LIST  
AV  
TV  
LIST  
AV  
TV  
TV  
To listen to sound from a television source on your To listen to sound from television on your audio  
audio system speakers without switching on the  
screen, press LIST repeatedly to display AV* on  
Beo4, and then press a source button, such as TV.  
system speakers with the screen switched on,  
press TV, press LIST repeatedly to display AV*, and  
then press TV again.  
LIST  
AV  
CD  
To listen to audio sound on the television speakers,  
press LIST repeatedly to display AV* on Beo4, and  
then press an audio source button, such as CD.  
*NOTE! In order to display AV on Beo4, you must  
first add it to the Beo4 list of functions. For further  
information, refer to the chapter ‘Customise Beo4’  
on page 66.  
59  
Your television in a link room with an audio system  
If you set up your television in a link room  
and enable the internal radio, you can choose  
Option 5  
Option 5  
which radio you want to listen to. However,  
you can only use the internal radio in your  
television, if you have enabled it, as  
described on page 56.  
LIST  
AV  
The setups described on this page illustrate which  
radio is activated when you have enabled the  
internal radio and connected a link radio to your  
television also.  
RADIO  
RADIO  
To listen to radio from the audio system, simply  
press RADIO.  
To listen to radio from the built in radio, press LIST  
repeatedly to display AV* on Beo4, then press  
RADIO.  
60  
Your television in a link room  
Option setting  
If you have BeoLink installed in your  
home and you choose to place your  
television in a link room, you can  
operate all connected systems  
through the television.  
For your entire system to function properly, it  
is essential that the television in the link  
room is set to the correct Option before you  
connect it to the system in the main room!  
Main room  
Link room  
To set the link room television to the correct  
option …  
Option 6*  
You must follow the procedure described  
below when you connect your television  
for use in a link room:  
> While holding the • button, press LIST.  
> Let go of both buttons.  
1 Connect the link room television to the  
mains  
> Press LIST repeatedly to display OPTION? on  
Beo4 and press GO.  
2 Using the Beo4 remote control,  
program the link room television to  
Option 6*  
> Press LIST repeatedly to display V.OPT on Beo4  
and press 6*.  
*If you connect the television for use in a link room  
where other link systems are already connected,  
such as speakers, you must set the television to  
Option 5 instead.  
3 Disconnect the link room television  
from the mains  
4 Make the link and aerial connections  
5 Reconnect the link room television to  
the mains.  
61  
Link room operation  
When you are in the link room, you can  
operate all connected systems with the Beo4  
remote control.  
Use a link room source –  
source type present in both  
rooms …  
Main room  
Link room  
Press the button for the source  
you wish to use  
TV  
Use sources present only in  
one of the rooms …  
Press the button for the source  
you wish to use  
RADIO  
Operate the source as usual  
Listen to stereo sound in your  
link room …  
Operate the selected source as  
usual  
Usually sound distributed from a  
main room video source, such as  
a set-top box, to the link room is  
transmitted in mono. However,  
you can select stereo sound:  
Use a main room source –  
source type present in both  
rooms …  
Press repeatedly on Beo4 until  
LINK* is shown in the Beo4  
display  
LIST  
LINK  
Press to switch on the television  
DTV  
LIST  
*In order to display LINK and AV on Beo4, you  
must first add them to the Beo4 list of functions.  
For further information, refer to the chapter  
‘Customise Beo4’ on page 66.  
Press repeatedly until AV* is  
shown in the Beo4 display  
Press the button for the source  
you wish to use  
TV  
AV  
Press to activate a source  
DTV  
Operate the source as usual  
connected to the main room  
system, such as a set-top box  
While using this function,  
distribution of other main room  
sources to other link room  
systems is not possible.  
Distribute sound and picture with BeoLink  
62  
The BeoLink system makes it possible  
to distribute picture and/or sound to  
other rooms throughout the house.  
To the MASTER LINK socket on the  
MASTER  
LINK  
link room system  
For example, you can connect your  
television in the living room to  
another video system or set of  
speakers in another room, thereby  
making it possible to ‘move’ the  
picture or sound to other rooms.  
TV IN  
LINK TV  
OUT  
If you have a BeoLink distribution  
system installed, you can either use  
your television in the main room,  
such as a living room, or in a link  
room, such as a study or bedroom.  
Video signal distribution to link  
rooms  
RF Link  
Amplifier  
The main room system must be connected to  
the link room system with a Master Link  
cable:  
If an audio system is already connected to the  
Master Link socket and you wish to connect more  
equipment, the Master Link cable must be split in  
two and joined with the cable from the link room  
using a special junction box. Contact your Bang &  
Olufsen retailer for assistance.  
Under certain circumstances, it may  
be necessary to enter modulator  
settings.  
> Connect the Master Link cable to the socket  
marked MASTER LINK on the television.  
> If you want to distribute video signals as well,  
connect an ordinary aerial cable to the socket  
marked LINK TV OUT on the television. Then  
run the aerial cable to the RF Link Amplifier and  
the Master Link cable to the link room. Follow  
the instructions enclosed with the link room  
equipment.  
Digital audio and video signals cannot be  
distributed from a main room television to the link  
room system.  
NOTE! Groups made on a television in a main  
room cannot be accessed from a link room  
television.  
63  
System modulator  
Link frequency  
MODULATOR SETUP  
MODULATOR ON  
LINK FREQUENCY  
FREQUENCY  
599  
FINE TUNE  
0
search  
GO  
GO  
store  
store  
If you have an audio setup, such as a BeoLink  
Active/Passive, and you choose to set up a  
If, for example, a TV program in your area is  
broadcasted on the same frequency as the  
non-linkable television in the same room, you BeoLink system uses, 599 MHz, you must tune  
must set the system modulator to ON. The  
factory setting is OFF, which must be used if  
you are using a linkable Bang & Olufsen  
television.  
the system modulator to an unoccupied  
frequency. When you change the link  
frequency in the main room system, make  
sure that the link frequency in the link room  
system corresponds to it.  
To switch on the system modulator …  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight TUNING.  
> Press GO to bring up the TV TUNING menu,  
and press to highlight LINK FREQUENCY.  
> Press twice, followed by GO. The  
MODULATOR SETUP menu appears.  
> Press or to reveal ON.  
To change the link frequency …  
> Press TV to switch on the television.  
> Press MENU to bring up the TV SETUP menu  
and press to highlight TUNING.  
> Press GO to bring up the TV TUNING menu and  
press to highlight LINK FREQUENCY.  
> Press GO to bring up the LINK FREQUENCY  
menu. FREQUENCY is already highlighted.  
> Press or to find an unused frequency.  
> Press GO to store the setting, or …  
> … press EXIT to leave all menus without  
storing.  
> Press GO to store the setting, or …  
> … press EXIT to leave all menus without  
storing.  
Two televisions in the same room  
64  
If you have placed your BeoCenter 6  
in a room where you already have a  
Bang & Olufsen television, and  
commands from Beo4 can be  
received by both televisions, you  
must change the option setting of  
BeoCenter 6. This prevents  
One remote control for both televisions  
For your television to function properly, it is  
essential that the television is set to the  
correct Option:  
BeoCenter 6  
Option 4  
To set your television for Option 4 …  
> While holding the • button on Beo4, press LIST.  
> Let go of both buttons.  
LIST  
LINK  
TV  
> Press LIST repeatedly to display OPTION? on  
Beo4 and press GO.  
simultaneous activation of both  
televisions.  
> Press LIST repeatedly to display V.OPT on Beo4  
and press 4.  
Operate your television in Option 4 …  
Normally, you can activate a source, such as TV,  
simply by pressing the relevant source button on  
Beo4. However, when you set your television to  
Option 4, you must do the following:  
TV  
> Press LIST repeatedly until LINK* is shown in  
the Beo4 display.  
In order to use teletext on a television you have set  
to Option 4, you must set up Beo4 to ‘VIDEO 3’,  
but this limits the Beo4 functions that can be used  
with televisions set to other Options. For further  
information refer to the chapter ‘Customise Beo4’  
on page 66.  
> Press a source button, such as TV.  
*In order to display LINK on Beo4, you must add it to  
the Beo4 list of functions.  
65  
Customise Beo4  
66  
The Beo4 buttons give direct remote  
control of a large number of  
television functions, and the Beo4  
display gives you access to even more  
functions.  
Set up Beo4  
Add an extra ‘button’  
The Beo4 is set up for use with BeoCenter 6  
from the factory. However, if you buy a new  
Beo4 you can set this up for your television  
also.  
When you add a new function to the Beo4  
list, you can then bring up this new ‘button’  
in the Beo4 display.  
Press and hold the standby  
button down  
•
Press and hold the standby  
button down  
•
Whenever a source is displayed on  
Beo4 (TV, RADIO, etc.), you can press  
the LIST button and bring up extra  
functions in the display to help you  
operate that source, just as if you  
were calling up extra buttons. You  
can also switch on extra equipment  
connected to your television.  
Press to get access to the Beo4  
setup function  
LIST  
Press to get access to the Beo4  
setup function  
LIST  
Let go of both buttons. ADD?  
appears in the display  
ADD?  
Let go of both buttons. ADD?  
appears in the display  
ADD?  
Press to bring up the list of  
available ‘buttons’ to add from.  
The first ‘button’ appears in the  
display, it flashes on and off  
GO  
Press repeatedly to display  
CONFIG? on Beo4  
LIST  
CONFIG?  
You can customise a new Beo4 to suit  
your television, and change the order  
in which these extra functions appear  
when you call them up.  
Press to be able to select the  
type of configuration  
GO  
Press to move forwards or  
backwards in the list of all extra  
‘buttons’  
Press repeatedly to display  
VIDEO? on Beo4  
LIST  
VIDEO?  
Note that Beo4 contains a list of all of  
Bang & Olufsen’s extra audio and  
video functions, but only those  
functions supported by the television  
work when you call them up in the  
Beo4 display.  
Press to add and place the  
‘button’ on its preset position or  
as the first ‘button’ in the list,  
or …  
GO  
Press to get access to the video  
configuration  
GO  
Press repeatedly to display  
VIDEO 2 on Beo4*  
LIST  
VIDEO 2  
GO  
STORED  
… press to insert the ‘button’ at  
a specific position in the list  
1 – 9  
Press to store the configuration  
ADDED appears, indicating that  
the ‘button’ has been added.  
You leave the Beo4 setup  
function automatically  
ADDED  
STORED appears, indicating that  
the configuration has been  
stored. You leave the Beo4  
setup function automatically  
*If you have set your television to  
Option 4, select ‘VIDEO 3’.  
67  
Move extra ‘buttons’  
Remove an extra ‘button’  
You can rearrange the order in which the  
extra ‘buttons’ appear when you press LIST.  
You can remove any of the extra ‘buttons’  
that are available when you press LIST.  
Press and hold the standby  
button down  
•
Press and hold the standby  
button down  
•
GO  
3
Press to get access to the Beo4  
setup function  
LIST  
Press to get access to the Beo4  
setup function  
LIST  
Let go of both buttons. ADD?  
appears in the display  
ADD?  
Let go of both buttons. ADD?  
appears in the display  
ADD?  
Press repeatedly to display  
MOVE? on Beo4  
LIST  
MOVE?  
Press repeatedly to display  
REMOVE? on Beo4  
LIST  
REMOVE?  
Press to bring up the list of extra GO  
‘buttons’. The first ‘button’  
appears in the display  
Press to bring up the list of extra GO  
‘buttons’. The first ‘button’  
appears in the display  
Press to move forwards or  
backwards in the list of extra  
’buttons’  
Press to move forwards or  
backwards in the list of extra  
’buttons’  
Add an extra ‘button’ to Beo4, either to the top of  
the list or to a specific position.  
Press to move and place the  
displayed ‘button’ as the first in  
the list, or …  
GO  
Press to remove the ‘button’  
shown in the display  
GO  
REMOVED appears, indicating  
that the ‘button’ has been  
removed. You leave the Beo4  
setup function automatically  
REMOVED  
GO  
3
… press to move the ‘button’ to  
a specific position in the list  
1 – 9  
MOVED appears, indicating that  
the ‘button’ has been moved.  
You leave the Beo4 setup  
function automatically  
MOVED  
Move extra ‘buttons’, either to the top of the list  
or to a specific position.  
Index  
68  
Beo4 remote control  
Connections  
Add a ‘button’ to the Beo4 list, 66  
Changing the Beo4 batteries, Guide p. 18  
Cleaning the Beo4, Guide p. 18  
Configure Beo4, 66  
Aerial and mains connection, 38  
Audio system – connect to the television, 56  
Camera, 39  
Connections – your television in a link  
room, 60  
Customise Beo4, 66  
Introducing your television and Beo4, Guide  
p. 4  
Decoder, 42  
Headphones, 39  
Move extra ‘buttons’, 67  
Link room connections, 60  
Loudspeakers, 49  
Remove a ‘button’ from the Beo4 list, 67  
Replace Beo4 batteries, Guide p. 18  
Using Beo4, Guide p. 4  
Register additional video equipment, 46  
Set-top box, 43  
Socket panel, 40  
Sockets for temporary connections, 39  
Video recorder, 44  
BeoLink  
Link frequency, 63  
Link room operation, 61  
Master Link socket, 40  
Your television in a link room, 60  
Contact  
Contact Bang & Olufsen, Guide p. 19  
Camera  
Decoder  
Connect a Camera, 39  
Connect a decoder, 42  
Copy from a Camcorder to a videotape, 39  
Displays and menus  
Clock  
Displayed information and menus, Guide p. 5  
Set the time and date, 29  
On-screen menus, 4  
Computer monitor  
DAB radio  
Adjust picture, 12  
Add new TV or radio programs, 27  
Adjust DAB aerial, 25  
Bring up the computer image on the  
screen, 12  
Adjust tuned DAB programs, 24  
Auto-tuning – first-time setup of your tele-  
vision, 16  
Connect a computer, 41  
Bring up a list of radio programs, Guide p. 14  
Change radio display, 33  
DAB DRC menu, 25  
Delete tuned programs, 21  
Edit tuned programs, 20  
Move tuned programs, 20  
Name tuned programs, 22  
Re-tune via automatic tuning, 26  
See list of all programs, Guide p. 14  
Tune in new programs, manual tuning, 24  
69  
First-time setup  
Picture  
Set-top box  
First-time setup procedure, 16  
Adjust brightness, colour or contrast, 30  
Change the picture format, Guide p. 9  
Remove the picture from the screen, 30  
Connect a set-top box, 43  
Set-Top Box Controller menu, 10  
Universal Beo4 operation, 11  
Format  
Use the set-top box in a link room, 11  
Use the set-top box’s own menu, 11  
Change the picture format, Guide p. 9  
Pincode  
Activate the pincode system, Guide p. 16  
Change or delete your pincode, Guide p. 16  
If you have forgotten your pincode, Guide  
p. 17  
Groups  
Socket panel  
Create Groups, Guide p. 12  
Camera and headphones sockets, 39  
Move programs within a Group, Guide p. 13  
Select programs in a Group, Guide p. 12  
Socket panel, 40  
Use your pincode, Guide p. 17  
Sound  
Headphones  
Placement  
Adjust or mute the sound, Guide p. 8  
Adjust volume, bass or treble, 31  
Change sound type or language, Guide p. 8  
Change speaker balance or combination,  
Guide p. 9,  
Connect headphones, 39  
Set up your television, 36  
Set positions for the television to turn to, 28  
Turn the television, Guide p. 7  
Language  
Change sound type or language, Guide p. 8  
Choose menu language, 32  
Position of television  
Stand  
First-time setup – choose menu language, 16  
Set positions for the television to turn to, 28  
Turn the television, Guide p. 7  
Determine the centre position – first-time  
setup, 18  
Loudspeakers  
Set positions for the television to turn to, 28  
Turn the television, Guide p. 7  
Radio  
Change speaker balance or combination,  
Guide p. 9  
Add new TV or radio programs, 27  
Adjust tuned radio programs, 24  
Auto-tuning – first-time setup of your  
television, 16  
Connect speakers, 49  
Subtitles  
Place external speakers, 48  
Set speaker distance, 50  
Sound adjustments, 31  
Subtitles from teletext, Guide p. 11  
Bring up a list of radio programs, Guide p. 14  
Create Groups of radio programs, Guide p. 12  
Delete tuned programs, 21  
Surround sound  
Maintenance  
Edit tuned programs, 20  
About the screen, Guide p. 18  
Listen to tuned programs, Guide p. 14  
Move tuned programs, 20  
Adjust speaker balance, 13  
Calibrate the sound level, 51  
Choose speaker combination, 13, Guide p. 9  
Connect speakers, 49  
Change Beo4 batteries, Guide p. 18  
Handling your television, 36  
Name tuned programs, 22  
Maintenance of your television, Guide p. 18  
Re-tune via automatic tuning, 26  
See list of all radio programs, Guide p. 14  
Place external speakers, 48  
See the name of the active sound system, 54  
Set speaker distance, 50  
Master Link  
Audio system with your television, 56  
Connect your audio system, 56  
Option setting, 57  
Sound adjustments, 52  
Use integrated audio/video system, 58  
> Index  
70  
Teletext  
TV programs  
Basic teletext functions, Guide p. 10  
Add new TV programs, 27  
Adjust tuned programs, 23  
Auto-tuning – first-time setup of your  
television, 16  
Day-to-day use of MEMO pages, Guide p. 11  
Store favourite teletext pages, Guide p. 11  
Bring up a TV list, Guide p. 6  
Delete tuned programs, 21  
Timer  
Set the television to switch itself on and off, 8 Edit tuned programs, 20  
Set the time and date, 29  
Move tuned programs, 21  
Timed play and timed standby, 8  
View, edit or delete a Timer, 9  
Name tuned programs, 22  
Re-tune via automatic tuning, 26  
Select a TV program, Guide p. 6  
Tune  
Wake-up Timer  
Add new radio or TV programs, 27  
Adjust tuned programs, 23  
Auto-tuning – first-time setup of your  
television, 17  
Enter a Wake-up Timer, 6  
Check or delete a Wake-up Timer, 7  
Set the time and date, 29  
Delete tuned programs, 21  
Move tuned programs, 21  
Name tuned programs, 22  
Re-tune via automatic tuning, 26  
Waste Electrical and Electronic Equipment  
(WEEE) – Environmental protection  
When disposing of electrical and electronic equip-  
ment by use of the collection systems available in  
your country, you protect the environment, human  
health and contribute to the prudent and rational  
use of natural resources. Collecting electrical and  
electronic equipment and waste prevents the  
potential contamination of nature with the  
The European Parliament and the Council of the  
European Union have issued the Waste Electrical  
and Electronic Equipment Directive. The purpose of  
the Directive is the prevention of waste of electrical  
and electronic equipment, and to promote the reuse  
and recycling and other forms of recovery of such  
waste. As such the Directive concerns producers,  
distributors and consumers.  
hazardous substances which may be present in  
electrical and electronic products and equipment.  
Your Bang & Olufsen retailer will assist with and  
The WEEE directive requires that both manufacturers advise you of the correct way of disposal in your  
and end-consumers dispose of electrical and  
electronic equipment and parts in an environmentally  
safe manner, and that equipment and waste are  
reused or recovered for their materials or energy.  
Electrical and electronic equipment and parts must  
not be disposed of with ordinary household refuse;  
all electrical and electronic equipment and parts  
must be collected and disposed of separately.  
country.  
Small products may not always be marked with  
the pictogram in which case this is present in the  
instructions for use, on the guarantee certificate  
and printed on the packaging.  
Products and equipment which must be collected  
for reuse, recycling and other forms of recovery are  
marked with the pictogram shown.  
This product fulfils the conditions stated  
in the EEU directives 89/336 and 73/23.  
Technical specifications, features and the use  
thereof are subject to change without notice.  
3507899  
0605  
Printed in Denmark by Bogtrykkergården a-s, Struer  
www.bang-olufsen.com  

Advent ADVUV630 User Manual
AmpliVox S312 User Manual
Cuisinart Smart Stick CSB 77 User Manual
Datexx DH 250 User Manual
Eclipse Fujitsu Ten CD5100 User Manual
Elite Screens Car Video System VMAX2 User Manual
IDEAL INDUSTRIES CLASSIC HE9 User Manual
Iiyama Car Video System E2001WS User Manual
Jensen vm9311ts User Manual
JVC GET0260 003B User Manual