Audiovox VOD1048 User Manual

ꢛꢊꢉꢕꢜꢕꢓꢔꢀꢝꢀ  
ꢁꢂꢃꢄꢀꢅꢆꢇꢀꢈꢉꢊꢋꢌꢊꢍꢎꢀꢏꢐꢑꢒꢓꢔꢕꢖꢓꢋꢀꢗꢕꢖꢌꢀꢇꢐꢇꢀꢘꢙꢍꢚꢊꢋ  
fastene vox entertainment system but remembe ngers remains the  
d. Enjoy your Audio r-safety of all passe  
number one priority.  
Features  
· 10.4 Inch (4:3) TFT (Thin Film Transistor) Active Matrix LCD Monitor  
· Built-in DVD Player  
· Built-in TV Tuner  
· AUX Input (for Game/Camcorder)  
· OSD (On Screen Display)  
· Audio Video Output Jacks  
· Two Channel Infrared Transmitter for IR Wireless Headphones  
· IR Repeater Sensor  
· Headphone Jacks (DVD / TV / Monitor)  
· Forward and Rear Remote Sensor  
· Dome Lights with Switch  
· Backlit Controls for Low Light Operation  
· Last Position Memory for DVD  
· DVD-R & CD-R/RW Compatible  
· Anti-Shock Buffer Memory  
· Multi-Angle Support  
· Multi-Subtitle Support  
· Full Function Remote Control  
-2-  
Controls and Indicators Diagram  
Main Function Descriptions  
1. POWER; Press the POWER button to turn the power on and off  
2. STOP: Press the STOP button to stop disc playback  
3. PLAY: Press the PLAY button. The DVD or Audio CDs will begin to play. If you press the PLAY button  
again while the DVD or Audio CDs playing, the DVD will pause.  
4. DVD L.E.D. Indicator  
This L.E.D. indicator will be illuminated when you select the DVD mode.  
5. TV L.E.D. Indicator  
This L.E.D. indicator will be illuminated when you select the TV mode.  
6. Previous: Pressing this button will select the previous chapter.  
7. Exit: Pressing this button will exit the DVD menu.  
8. Next: Pressing this button will select the next chapter.  
9. Menu: Press this button to access the DVD menu.  
10. Enter: This button is used to choose the highlighted selection from the OSD menu. (If the highlighted  
selections are numbered the appropriate number key on the remote may be used.)  
-3-  
11. Eject  
DVD disc is stopped and ejected by pressing this button.  
12. DVD Disc Insertion Slot  
With the label surface up, gently insert the disc into the slot until the loading mechanism engages  
and the DVD disc is pulled into the unit.  
13. Infrared Transmitter and Sensor  
Used to transmit audio to wireless headphones. Also allows the remote control to operate the  
VOD1048 and to control other accessories in the system  
14. Dome Lights  
Provides additional interior illumination.  
15. Three Position Dome Light Switch  
matically switches on the dome lights in conj  
· Auto Auto  
· Off … The dome lights will not turn on in this position.  
unction with the vehicle's interior illumination.  
· On … Turns on the dome lights. Do not leave the switch in this position as it will drain the vehicle  
battery.  
16. Screen Release  
Slide in direction of the arrow to release the drop down screen.  
17. Side Remote Sensor Eye  
Allows the remote control to operate the VOD1048 and control the other accessories.  
18. Headphone Jack  
Allows the use of wired headphones with a 1/8" plug for listening to video program audio.  
19. Aux input jack  
Auxiliary Audio input (Right and Left Channel) and Video input  
20. Headphone jack  
Allows the use of wired headphones with a 1/8" plug for listening to video program audio.  
NOTE: Audiovox recommends the use of the Audiovox HP275 Headphones when using wired headphones.  
B AT T E RY INST AL L AT ION  
Before attempting to operate your Remote Control, install the batteries as described below.  
1) You can use your remote controller within a distance of 7~10m and an angle of 30 degrees from the left  
and right sides of the remote Sensor Eye of VOD1048.  
2) Install two "AA" batteries as shown. Make sure that proper polarity (+ or -) is observed.  
3) The remote control will operate the VOD1048 and most Audiovox VCP's. It is not a universal remote  
control and will not control equipment from other manufacturers.  
-4-  
REMOTE CONTROL OPERATION  
- 5-  
REMOTE CONTROL FUNCTION DESCRIPTIONS  
1. POWER ON/OFF  
Press this button to turn the VOD1048 on. The selected video source (DVD/TV/AUX) will be displayed on  
screen and the picture will appear in a few seconds. Press the button again to turn the VOD1048 off.  
2. SOURCE (DVD/TV/AUX/MONITOR) Button  
Video equipment connected to the AUDIO/ VIDEO inputs can be selected and displayed on the LCD  
display screen by pressing the button. Each time the button is pressed, the Audio / Video source will  
change in the following order DVD, TV, AUX and MONITOR.  
3. AUDIO  
This button allows you to select the language you prefer from the menu. Note that not all DVDs support  
this function.  
4. MENU  
Pressing this button will enable user to select the DVD main menu.  
5. TITLE  
Pressing this button will go to the DVD root menu.  
6. EJECT/LOAD  
Pressing this button will eject or load a disc.  
7. LEFT  
Use this button to navigate through the menu selections.  
8. UP  
Use this button to navigate through the menu selections.  
9. RIGHT  
Use this button to navigate through the menu selections.  
10. DOWN  
Use this button to navigate through the menu selections.  
11. SELECT  
Use this button to select the highlighted menu selection.  
12. ZOOM  
Pressing this button will allow you to enlarge the picture by x2, x3, x4, or reduce by x1/2, x1/3, x1/4.  
You may then pan the display by pressing the four arrow buttons (7, 8, 9 and 10).  
13. VOLUME UP  
Use this button to increase the volume level of the headphone jacks.  
14. VOLUME DOWN  
Use this button to decrease the volume level of the headphone jacks.  
15. MUTE  
Pressing this button will mute the audio output.  
-6-  
16. TV C hannel UP  
When in the TV Mode, press this button to increase the TV channel.  
17. TV C hannel DOWN  
When in the TV Mode, P ress this button to decrease the TV channel.  
18. S TOP  
P ressing this button will stop playback of the disc.  
19. R evers e S can  
P ressing this button will allow you to scan the disc backwards at x2, x4, x8, x16, x32 the normal speed.  
When in pause mode, it will reverse scan at x1/2, x1/4, 1/8, x1/16 the normal speed.  
20. P lay/P aus e  
P ressing this button will start the play of the DVD disc. P ressing again will pause the DVD disc.  
21. Forward S can  
P ressing this button will allow you to scan the disc forwards at x2, x4, x8, x16 x32 the normal speed. When  
in pause mode, it will forward scan at x1/2, x1/4, 1/8, x1/16 the normal speed..  
22. S UB TITL E  
This button controls the language selection and allows you to choose whether the subtitles are on or off.  
23. S E T UP  
P ressing this button will allow for player settings such as G eneral, Audio, Video, P references and P assword  
set up.  
24. DIS P L AY  
This button turns the screen display on and off. This will display various playback information of the disc.  
25. ANG L E  
If the DVD disc contains sequences recorded from different camera angles, pressing the button causes the  
angle icon to appear and will show you the number of camera angles available and allows you to  
change the angle if you wish. The angle function will not work with DVD discs that do not have multiple  
angles.  
26. NUMB E R (0-9)  
These numeric keys allow you to directly enter the highlighted menu chapter, or track selection, and enter a  
password.  
27. +10  
This button will allow you to directly enter the tracks above 10. For instance, track 17 is (+10), then  
(7). Track 21 is (+10), (+10), then (1).  
28. C L R (C L E AR )  
P ressing this button will clear track numbers while in track selection or search mode.  
-7-  
29. VCP POWER (A/B)  
When in VCP Mode, Press this button to turn the VCP on.  
When in DVD Mode, Multiple presses of this button will allow you to repeat a sequence A to B audio or A  
to B video. To set the starting point, press once, and to set the ending point, press a second time. To  
cancel the repeat sequence, press a third time.  
30. STOP (RETURN)  
When in VCP Mode, Pressing this button will stop playback of the Video Cassette.  
When in DVD Mode, This button will allow you to go back to last playing position from Menu screen.  
31. REPLAY (PROGRAM)  
When in VCP Mode, Pressing this button will replay the Video Cassette.  
When in DVD Mode, Pressing this button will allow you to make a favorite program list with program  
button on CD or on MP3 disc.  
32. (REVERSE SCAN)  
When in VCP Mode, Pressing this button will play fast reverse.  
When in DVD Mode, this button will allow you to select the time display mode.  
33. (  
PLAY)  
When in VCP Mode, Pressing this button will play the Video Cassette.  
When in DVD Mode, This button selects TV type such as NTSC, PAL and Auto.  
34.  
(FORWARD SCAN)  
When in VCP Mode, Pressing this button will play fast forward.  
When in DVD Mode, This button will select repeat mode such as Repeat disc, Repeat track, and Repeat  
off.  
35. PREVIOUS  
Pressing this button will select the previous track or chapter.  
36. NEXT  
Pressing this button will select the next track or chapter.  
Overhead Dome Lights  
The lights integrated into the VOD1048 are  
controlledbyathree-positionslide switch.  
Slidingtheswitchtotheonpositionwill turn  
thelightson.Theoffpositionwillprevent the  
lightsfromturningonatalltimes,andthe  
autopositionwill allowthelightstoturnon  
Dome Li ght  
andoffwiththevehicle'sinteriorlighting.  
Switch  
RefertotheInstallationManualforthe wire  
connections.Donotleavethevehicle  
unattendedwiththedomelightswitchinthe  
on position,asthiscouldresult ina  
dischargedbattery.
-8-  
Remote Sensor  
Remote Sensor  
Eyes  
The VOD1048 incorporates two Infrared sensors, which relay signals from the remote control to allow the  
unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function  
allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can  
relay signals from most manufacturers’ remote controls to its respective component connected to the Video  
1 input. In this case you must use the remote control supplied with the component.  
Wireless Headphones (Optional)  
The VOD1048 includes a built-in dual channel infrared transmitter for use with Audiovox wireless  
headphones (Audiovox Part Number IR2CHS-Dual channel). The volume can then be adjusted using the  
controls on each headset. The wireless headphones must be used within a line of sight from the transmitter,  
as infrared transmissions, like visible light travel only in a straight line. See the documentation  
accompanying your Audiovox wireless headphones.  
Wireless Headset Special Features (Optional)  
Automatic Level Control prevents input signal overloading.  
• Uses high frequency infrared light to assure a clean signal for clear reception.  
IR2 Input  
Any line level audio source may be connected to this input (Satellite Radio, CD Changer etc). The audio  
program connected to the IR2 input can be received on the B channel of the dual channel wireless  
headphones (Audiovox Part Number IR2CHS).  
- 9-  
Wired Headphones  
Any standard wired headphones with a 1/8 jack can be connected to the headphone jacks.  
Wired FM Modulator  
The VOD1048 is equipped with audio output jacks that can be connected to an optional FM Modulator  
(Part Number FMM100A) to allow the audio to play through the vehicle radio.  
DVD OPERATION  
Playing a Disc  
1 Press the DVD button on your remote control and insert the disc it will automatically begin playback  
2 If you have stopped a disc that was playing, you can restart a disc by pressing the Play/Pause button on  
the faceplate or your remote control.  
Pausing a Disc  
To pause a disc that is playing, press the Play/Pause button.  
Stopping a Disc  
1 To stop a disc that is playing, press the Stop button on your remote control.  
The disc can be restarted in the same place by pressing the Play/Pause button.  
2
Selecting a Chapter Using the DVD Menu  
a root  
contain  
menu  
that, among other options allows you to select a specific chapter  
Most DVDs  
to play. To use the DVD menu to select a chapter to play, follow the stops below:  
1. Press the Menu button on either the remote control or the front panel. The DVD menu is displayed.  
2. Use the direction arrows to highlight the chapters option in the menu and press SELECT.  
3. Use the direction arrows to highlight the chapter  
that you want to play and press SELECT. The menu is  
closed and the chapter is immediately played.  
Playing from a Specific Time in a Title or Track  
This feature is available for audio discs and other discs that support the ability to move to a specific time in  
a track or title. For example, if a track is 5 minutes and 38 seconds long you can select to start playing  
from 5 minutes and 8 seconds so that you only listen to the last 30 seconds of the track.  
-10-  
1. Press the DISPLAY button on your remote control until the Time option is displayed in the top left  
corner of the screen (CD) or the Main Menu screen is displayed (DVD).  
2. Use the number buttons on your remote control to enter the time that you want to move to in the  
format: mm:ss.  
3. When you have finished entering the time, the Time option is closed and the track or title is played  
from the time entered.  
Playing a Specific Track or Chapter and Title  
1. Press the DISPL AY button on your remote control until either the Track or Title and Chapter option is  
displayed or the Main Menu screen is displayed.  
2. Use the cursor button to highlight "Chapter" and then press the Enter button.  
3. Use the number buttons on your remote control to enter the track or title and chapter that you want to  
play and then press Enter.  
Skipping Through the Chapters or Tracks  
As you are playing a disc you can skip to the next or to a previous chapter (on a DVD) or track (on a audio  
disc). This is carried out using the Next and  
Previous buttons as follows:  
.
To skip to the beginning of the next chapter or track, press the  
Next button  
To skip to the beginning of the current chapter or track, press the Previous button.  
To skip to the beginning of the previous chapter or track, press the Previous button twice.  
Using the Repeat Features  
The repeat feature allows you to repeat a section of a disc once it has finished playing. The following items  
can be repeated:  
The entire disc  
A single track  
A single chapter  
A single title  
A section of the disc between twoselected points  
Repeating a Track, Chapter, or Title  
1 Play the track, chapter, or title that you want to repeat.  
2 Press the REPEAT MODE button on your remote control until the required repeat mode is displayed in  
the top left corner of the screen. This can be Repeat Track, Repeat Chapter, or Repeat Title. When the  
c
disc reaches the end of the selected tra k, chapter, or title, it will start playing it again.  
3 To stop track repeat, press the REPEAT MODE button again until Repeat Off is displayed in the  
top left corner of the screen.  
Repeating a Section of any Disc  
1 Press A > B once to start selection to select the starting point A.  
2 Press A > B again to finish selection to select the ending point B.  
3 To cancel selection press A > B again.  
Playing a Disc at Different Speeds  
1 You may play a disc at different speeds in both forward and reverse directions.  
remote  
2 To play the disc at different speeds in a forward direction use the Forward scan button on your  
control. The speeds that can be achieved are:  
X2, X4, X8, X16 and X32 for DVDs and video CDs.  
X2, X4, X8, X16 and X32 for audio discs and mp3s. The audio can be heard at all speeds.  
-11-  
3 To play the disc at different speeds in reverse use the Reverse scan button on your remote  
control. The speeds that can be achieved in reverse are:  
X2, X4, X8, X16, X32  
Changing Main Menu with Display Key  
1. To display the Main Menu for the disc that is playing, press DISPLAY on your remote control.  
2. The Main Menu is available to change the way the disc is playing.  
Changing a Title, Chapter to play  
Changing Audio Language  
Selecting to view Subtitle  
Changing the Angle of View  
Entering a Time to Play  
Setting a Item to Repeat  
Changing the Time Display  
Select/ Enter button.  
3. Select the options by highlighting the desired option using the cursor buttons then press the  
Using the Setup Menu  
Once the initial settings have been completed, the player can always operate under the same conditions  
whenever the power is switched on. These settings are called SETUP data that are easily modified and  
stored using the SETUP menu. The SETUP menu includes the information for GENERAL, AUDIO,  
VIDEO, PREFERENCES and PASSWORD controls.  
1. Press the STOP button twice, if the disc is being played.  
2. To display the  
SETUP menu, press the SETUP button.  
3. Use the Cursor buttons to highlight the desired item.  
5. To exit the SETUP menu, press the SETUP button again  
4 Press ent r to select the highlighted item.  
GENERAL SETUP  
TV DISPLAY You can select the aspect ratio according to your TV. If the TV on which the  
(LetterBox)  
movie is played is 16:9 "WIDE". If it is 4:3 type, choose NORMAL/PS (Pan & Scan) or NORMAL/LB  
ANGLE MARK You can set up so that the angle mark appears on scenes that contain angle options.  
OSD LANGUAGE …You can select an OSD language such as English, French, Spanish, etc  
CAPTIONS … Adjust caption options.  
.
SCREEN SAVER … Adjust Screen Saver options.  
selections  
LAST MEMORY … Adjust Last Memory  
AUDIO SETUP  
SPEAKERYou canselect various speaker settings.  
DOLBY DIGITAL… Choose Stereo or Mono mode and adjust Dynamic range.  
EQUALIZER … Choose the desired preset equalizer mode.  
3D PROCESSING Use this option to make a reverb effect if you prefer.  
HDCD… Adjust the desired Filter frequency.  
VIDEO SETUP  
QualityAdjust Video quality controlssuch as Sharpness, Brightness, Contrast, Gamma, Hue and  
Saturation etc.  
-12-  
PREFERENCE SETUP  
You can select a preference Setup such as:  
TV Type: You can select TV Type (PAL, MULTI, NTSC)  
PBC: You can select PBC ON and OFF.  
AUDIO: Choose the desired language.  
SUBTITLE: Choose the desired language.  
DISC MENU: Choose the desired language.  
PARENTAL Setting: You can select the rating level.  
DEFAULT Reset: Setup Menu can be reset to DEFAULT Value.  
PASSWORD SETUP  
Select the Password option.  
Enter your old password and press enter. E nter a new password and press E nter.  
Re-enter your new password to confirm then press the ENTER button.  
Note: The Default P assword is 3308. This password is always effective even after you have selected  
your own password and changed it. To avoid the possibility of others using the default password  
to set the parental level and change the password, you can record this default password in another  
area and delete it from this manual. S ome discs can be limited depending on the age of users while  
some discs cannot.  
-13-  
SOUND AND PICTURE SETUP  
Adjusting the sound settings  
The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE.  
Press the MENU button.  
The PICTURE menu is displayed.  
1. Use the  
(9) button to move to the SOUND menu.  
(7) or  
2. Use the (8) or 10) button to select one of the following options:  
TREBLE  
BASS  
BALANCE  
3. Press the SEL (11) button.  
4. Press the (7) or (9) button to adjust the setting to suit your  
personal preference.  
5. Press the MENU button repeatedly until the menu disappears.  
- 14-  
CONTRAST, BRIGHTNESS, SHARPNESS, COLOR, TINT  
1. Press the MENU button. The PICTURE menu is displayed.  
2. Press the SEL button.  
s
3. Adjusting the picture setting  
Use the (8) or (10)  
CONTRAST  
BRIGHTNESS  
SHARPNESS  
COLOR  
button to select one of the following options:  
TINT  
4. Press the (7) or (9) button to adjust the setting to your personal preference.  
5. Press the MENU button repeatedly until the menu disappears.  
-15-  
[ M E M O ]  
- 16-  
TROUBLESHOOTING  
Symptom  
Possible Cause  
Solution  
Unit does not turn on  
Main Power Switch  
turned off  
Press in Main Power Switch  
No Power  
Check fuses and that the ACC power is on  
Load disc label-side up  
Disc does not play  
Disc is loaded  
Improperly  
Incorrect disc type  
Check to see that disc is CD, CD-R, CD-RW,  
VCD, MP3-CD, DVD-R, DVD-RW or DVD Movie : Other types  
will not play.  
Invalid Region Code  
Rating is above  
parental preset  
Dirty disc  
Use Region 1 disc only.  
Enter password to override or change  
rating settings  
Make sure the disc is free from scratches  
and dirt  
No picture  
No sound  
Intermittent connections Check all video connections  
Wrong input on monitor Check input selection of TV or receiver  
Intermittent connections Check all audio connections  
DVD disc is in fast or  
slow mode  
There is no audio playback on DVD discs  
during fast or slow modes  
Picture is distorted or  
jumps during fast forward  
or reverse  
MPEG-2 decoding  
Some functions are prohibited by the DVD  
software.  
Some remote buttons  
do not operate during  
DVD play : prohibited  
symbol appears (see  
next page)  
MPEG-2 decoding  
It is a normal artifact of DVD playback for  
pictures to jump or show some distortion  
during rapid play  
The OSD menu is in a  
foreign language  
Incorrect OSD language Change OSD language selection  
The symbol appears  
Requested function not Some functions are prohibited by the DVD  
available at this time  
software.  
Picture is displayed in the Incorrect match of  
Change aspect ratio settings  
wrong aspect ratio  
aspect-ratio settings to  
disc  
Remote control  
Inoperative  
Weak batteries  
Sensor is blocked  
Change both batteries  
Clear path to sensor  
The picture has  
Damaged disc  
Make sure the disc is free from scratches  
occasional distortion  
and dirt.  
MP3 discs won’t read or Incorrect record format Make sure CD is not recorded with variable  
they skip  
bit rate  
Re-record the CD at a slower rate  
-17-  
12 MONTH LIMITED WARRANTY  
Copyright 2004 Audiovox Corp. 150 Marcus Blvd. Hauppauge, NY 11788  
128-7069A  

Archos 300 User Manual
Asus Car Video System MX279 User Manual
Black Box RS IC107A R3 User Manual
Blaupunkt Seattle MP74 US User Manual
Bosch Appliances Boiler 25Si User Manual
Boss Audio Systems BOSS Riot GT1080 User Manual
Bryan Boilers DST 50 User Manual
Citizen Systems Calculator sdc 620II User Manual
JBL GTO OM 1214D User Manual
JVC Everio GZ HD500 User Manual