FMA Series Gangable Cabinets
FMA44-36G
RACK, HEAVY DUTY 14 GAUGE GANGABLE
WITH ADJUSTABLE RAILS - FMA SERIES
FMA44-25G
FMA35-25G
FEATURES
• Available in the most popular heights & depths
• Designed with contractor input to meet storage and wire management
needs for today and into the future
• Increased width for better wire management
• Rear door included
• 14 gauge tops/bottoms/frames
• 16 gauge side panels
• Hat sections are completely redesigned with rail slot and retainer hole for extra
strength
• Two pairs of 11 gauge CRS adjustable mounting rails plated, drilled and tapped
10-32 with hash marks to indicate rack unit increments.
• Slots in rack rails for cable pass-through and front door hinge access (SM doors)
• Leg levelers included
• Threaded inserts installed for optional surface doors
• Hat sections sized to facilitate standard 19" panels–handy for mounting "stick-on"
modules and other hardware
• Slots maintained in hat sections for wire management
• Knockouts on removable standard 2RU panels (rear of cabinet top & bottom) Panel
includes 3⁄8" KOs for BNC connectors (perfect for diversity wireless systems)
• Increased vent space on top sections–use Atlas Sound fan panels or 5000 series
to panels
• Stocked in scratch resistant textured black (-962)
• Other convenience, cooling, and electronic accessories are available
• 2RU panel on bottom for cable pass-through between cabinets
• New lift–off (optional), locking side panels–“swing-out” design facilitates easy
service access
FMA Series (gangable) Cabinets
• Holes for ganging hardware pass through (joins racks)
• UL listing & seismic rating pending
APPLICATIONS
The Atlas Sound FMA series of vertical cabinets offer the flexibility of designing
modular configurations to match specific installation needs. Superior wire
management designs make them ideal for single and multi-bay configurations where
easy accessibility to wiring in and between racks is desired. Designed for a high
strength-to-weight ratio, these racks are built to E.I.A. specifications. Standard #EIA-
310-C meets most OEM, commercial, and military requirements. All are commonly
used to house electronic, communications, computer, security, and switching
equipment in commercial, industrial, and institutional applications.
GENERAL DESCRIPTION
The new Atlas Sound FMA (Folded Metal Assembly) design incorporates an
innovative "Radius" look characterized by sleek corners and seamless joints. This
new look blends effortlessly in today's ergonomically designed office environment. A
wider footprint of over 24" offers installers the luxury of more available working space,
particularly valuable in wire management applications where space is often inherently
limited.
Optional FMARTK25 Roller Truck
All units feature 14 gauge steel tops/bottoms and frames. A flush mount 16 gauge
steel rear door with integral "stop" to prevent over-travel is included as standard.
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
15
© 2006 Atlas Sound
Printed in U.S.A.
000706
ATS001458 RevC 7/06
SL10-2026
PANEL DETAIL
1.430
1.690
2.210
0.520
0.780
D
B
19.0
4.20
C
A
BACK VIEW
TOP VIEW
SIDE VIEW
FRONT VIEW
BOTTOM
VIEW
A
A
19.85
C
C
F
E
G
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
17
© 2006 Atlas Sound
Printed in U.S.A.
000706
ATS001458 RevC 7/06
SL10-2026
MODEL
GANGING
OUTSIDE DIMENSION
PANEL
SPACE (D)
TOP PANEL
OPENING (E)
FLOOR
MOUNTING
HOLE
LOCATION
(F)
OPTIONAL 1"
DEEP
PLEXIGLASS
SURFACE
MOUNT
OPTIONAL 1"
DEEP
PERFORATED
STEEL
OPTIONAL 1"
DEEP
SOLID STEEL
SURFACE
MOUNT FRONT
DOOR
OPTIONAL 3"
DEEP
PERFORATED
STEEL
SURFACE
MOUNT FRONT
DOOR
WIDTH (A)
HEIGHT (B)
DEPTH
(C)
SURFACE
FRONT DOOR MOUNT FRONT
DOOR
(G)
FMA44-36G
FMA44-25G
FMA35-25G
24.125
(612.65mm)
85.063"
(2160.59mm)
36"
(914mm)
77.063"
(44RU)
(1957.39mm)
31.625"
(18RU)
(803.285mm)
33.789"
(858.25mm)
PFD44
PFD44
PFD35
MPFD44
MPFD44
MPFD35
SFD44
SDF44
SDF35
MPFD44-3
MPFD44-3
MPFD35-3
19.09"
(484.89mm)
24.125
(612.65mm)
85.063"
(2160.59mm)
25.5"
(648mm)
77.063"
(44RU)
(1957.39mm)
21.0625"
(12RU)
(535mm)
23.289"
(591.55mm)
19.09"
(484.89mm)
24.125
(612.65mm)
69.313"
(1760.54mm)
25.5"
(648mm)
61.313"
(35RU)
21.0625"
(12RU)
23.289"
(591.55mm)
(1557.34mm)
(535mm)
19.09"
(484.89mm)
MODEL
GANGING
OPTIONAL
CASTER
KIT
OPTIONAL
VENTED SIDE
PANELS
FMA44-36G
FMA44-25G
FMA35-25G
NONE
FMA44-36LRPV
FMA44-25LRPV
FMA35-25LRPV
FMARTK25
ARCHITECT AND ENGINEER SPECIFICATIONS
FMA SERIES. Equipment rack shall be Atlas Sound Model _____.
It shall be 14 gauge CRS frame with 14 gauge top and bottom sections
and include two pairs of 11 gauge CRS adjustable mounting rails plated,
drilled and tapped 10-32 with hash marks to indicate rack unit
increments. Bottom section shall be reinforced with 12 gauge stiffeners
front to back. Base to be tapped to accept factory installed leg levelers
and punched to accept optional casters. Cabinet depth shall be _____
Frame shall be finished in –962 black powder coat epoxy.
Racks shall be provided with 550 CFM top mounting fan panel
Model____.
Door(s) shall be Model____. Doors shall include cylinder lock, handle
and shall be hinged (right, left).
Model_____. Single frame and/or entire installation shall be on casters
Model_____.
Optional:
Cabinet shall be enclosed with 16 gauge CRS swing out side panels
Model___. Side panels shall include locks keyed with technician key.
Racks shall be provided with 16 gauge CRS solid or perforated
top panel Model____,
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
© 2006 Atlas Sound
Printed in U.S.A.
000706
ATS001458 RevC 7/06
SL10-2026
|