York Affinity 292443 Xtg D 0508 User Manual

292443-XTG-D-0508

FLEXIBLE LIGHT COMMERCIAL UNIT

GENERAL

York^®Affinity™ Series packaged units are designed to han-

dle applications ranging from residential to light commercial

and any in between. The Affinity™ is a unit that gives you the

flexibility and choices you need in today’s market.

TECHNICAL GUIDE

AFFINITY™ SERIES

EXPORT ONLY

FEATURING

SINGLE PACKAGE GAS/ELECTRIC

AIR COOLED AIR CONDITIONERS

2.5 THROUGH 5 NOMINAL TON

•

COOLING/GAS HEATING UNITS (NATURAL GAS OR

PROPANE)

LOW PROFILE

QUIET OPERATION

COMMON FOOTPRINT

OPTIONAL SLIDE IN MOTORIZED DAMPERS

OPTIONAL SLIDE IN ECONOMIZERS

OPTIONAL PROPANE CONVERSION KIT

OPTIONAL HIGH ALTITUDE CONVERSION KIT

(NATURAL GAS/PROPANE)

•

DNA030 THROUGH 060

8.6 - 9.2 EER

•

FULL PERIMETER BASE RAILS

BOTTOM AND SIDE UTILITY CONNECTIONS

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

292443-XTG-D-0508

CONDENSATE PAN - A non-corrosive, long-lasting, water-

tight pan is positioned below the evaporator coil to collect and

drain all condensate. Less collection of stagnate condensate

will build-up. The condensate pan conforms to ASHRAE 62-

89 standards (Ventilation for Acceptable Indoor Air Quality).

DESCRIPTION

These packaged cooling/heating air conditioners are

designed for outdoor installation. Only utility and duct con-

nections are required at the point of installation.

The gas-fired heaters have aluminized steel tubular heat

exchangers and spark to pilot ignition. They are available in

natural gas with field conversion to propane.

CONDENSATE DRAIN - The heavy duty, 3/4 inch NPTI cop-

per connection is more tolerable during installation and is

more durable over time. The connection is rigidly mounted to

assure proper fit and leak tight seal.

STANDARD FEATURES/BENEFITS

DURABLE FINISH - With a heavy duty cabinet made of pow-

der-painted, galvanized steel the neutral color blends into

surrounding areas. The powdered paint, provides a better

paint to steel bond, which resists corrosion and rust creep.

The special primer formulas and glossy finish insure less fad-

ing when exposed to sunlight and offers a more attractive on

site appearance. This paint finish meets ASTM-B117 stan-

dards for 1000 hours salt spray rating. The highest in the

industry.

OPERATING EFFICIENCY - All units provide high operating

efficiencies and have a minimum AFUE of 80% and EERs of

8.6 to 9.2. All efficiencies exceed legislated minimum levels.

ON SITE FLEXIBILITY - All model sizes share a common,

compact design cabinet in a single footprint. The installer has

the flexibility of setting one curb and placing the proper ton-

nage unit on that curb after the internal load has been deter-

mined. Field convertible duct connections from side shot to

down shot allows the installer to have greater flexibility with

less inventory.

FULL PERIMETER BASE RAILS - The easily removable

base rails provide a solid foundation for the entire unit and

protects the unit during shipment. The rails provide fork lift

access from all sides, and rigging holes are also provided so

that an overhead crane can be used to place the units on a

roof. On applications where the unit is placed on a pad, the

base will keep the unit off the pad to deter corrosion. On

applications where height is limited, the inch high base rails

may be removed on location.

LOWER INSTALLATION COST - Installation time and costs

are reduced by easy power and control wiring connections.

The small base dimension means less space is required on

the ground or roof, plus, the installer can fit this unit between

the wheel wells of full size pick-up truck. All models are well

under 500 pounds.

All units are completely wired, charged with R-22 and tested

prior to shipment. Unique test stations using a new state of

the art computerized process system are used to insure prod-

uct quality. Refrigerant charge, and component part numbers

are verified via computers at assembly. Vital run test statistics

such as system pressure, motor currents, air velocity and

temperature, unit vibration, and gas system safeties are mon-

itored and recorded by the system to insure unit perfor-

mance.

MORE ATTRACTIVE APPEARANCE - A single piece Water

Shed top cover containing a top discharge condenser fan

arrangement requires less square footage on installation and

provides a wider variety of installations. The one piece design

adds greater water integrity. Rounded corners with water drip

edges add to the attractive appearance. The cabinet panels

have a non-fibrous insulation that will not release insulation

fibers into conditioned area.

TOP DISCHARGE - The top discharge condenser fan does

not disrupt neighboring areas or does this dry-out vegetation

surrounding the unit. The warm air from the top mounted fan

is blown up away from the structure and any landscaping.

This allows compact location on multi-unit applications.

Equal size, side supply and return duct connections allows

easy hook-up of ducts to match low crawl spaces without

transition pieces.

UTILITY CONNECTIONS MADE EASY - Gas and electric

utility knockouts are provided through the bottom as well as

the side of the unit. Utility connections can be made quickly

and with a minimum amount of field labor. A field supplied

and field installed electrical disconnect switch must be

installed.

CONDENSER COIL GRILLE - A multi-piece totally enclosed,

rigidly mounted condenser coil grille provides protection from

objects after installation and provides protection during transit.

LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise up and away from the liv-

ing area. The rigid top panel effectively isolates any motor

sound. Isolator mounted compressor and the rippled fins of

the condenser coil muffle the normal fan motor and compres-

sor operating sounds. The unique formed base pan also aids

in sound alterations with it's Super-Structure design. This

design strategically places embossments in the pan for opti-

mum strength and rigidity.

CONVERTIBLE AIRFLOW DESIGN - The bottom duct open-

ings are covered when they leave the factory ready to be

used for a side supply / side return application. If a bottom

supply / bottom return application is desired, you simply

remove the two panels from the bottom of the unit and place

them in the side supply / side return duct openings. No panel

cutting is required and no accessory panel is necessary.

Convertible airflow design allows maximum field flexibility and

minimum inventory.

Johnson Controls Unitary Products

292443-XTG-D-0508

FAN SYSTEM - All models operate over a wide range of

design conditions with a 3-speed direct-drive fan motor.

These units easily match all types of applications and pro-

vides greater on site flexibility to match comfort requirement.

compartment has an additional large panel with a built-in

handle tab. Removing this panel will allow the blower assem-

bly to slide-out for easy removal for maintenance and ease of

trouble shooting.

SIMPLE CONTROL CIRCUIT - A low voltage printed circuit

board contains a diagnostic indicator light and a low voltage

terminal strip. An additional set of pin connectors is also pro-

vided to simplify the field interface of external controls. Mate-

n-lock plug connectors are used. The electrical control box is

not located in the compressor compartment. The controls are

mounted on a Control-Tilt control panel to allow the access

cover to be removed for trouble shooting and maintenance

without affecting the normal system operating pressures. All

wiring internal to the unit is color/number coded.

REPLACEMENT PARTS - The installer has no need to carry

an inventory of unique parts or needs special training to

replace any of the components parts for these units. All are

easily obtained from Source 1 or other part houses.

SYSTEM INTEGRATION - Each unit has the internal ability

to integrate an electronic air cleaner or humidifier to work in

conjunction with the base unit.

FIELD-INSTALLED ACCESSORIES

PROPANE CONVERSION KIT - Kit includes burner orifices,

gas valve conversion and installation instructions necessary

to field convert unit from natural gas to propane.

PROTECTED COMPRESSOR - The compressor is internally

protected against high pressure and temperature. This is

accomplished by the simultaneous operation of high pressure

relief valve and a temperature sensor which protect the com-

pressor if undesirable operating conditions occur.

HIGH ALTITUDE CONVERSION KIT (Natural Gas/Propane)

- Kit includes all necessary labels and instructions to field

alter units with natural gas/propane for installation above

2000 feet. Burner orifices must be obtained from Source 1

Parts. Propane Conversion Kit must be obtained separately.

EXCLUSIVE COIL DESIGN - Grooved copper tubes and

enhanced aluminum fin construction improves heat transfer

for maximum efficiency and durability.

ECONOMIZER DOWN DISCHARGE / SUPPLY KIT - Modu-

lating integrated economizer provides simultaneous opera-

tion between the mechanical cooling and economizer

operation. Independent blade design insures proper control

and less than 1% leak rate. Includes hood and mesh bird

screen filter integrated into the hood, dry bulb sensor and

relief damper. Separate field accessories of single enthalpy

and dual enthalpy are also available. A built-in barometric

relief of 25% is provided.

HEAT EXCHANGERS - Are corrosion-resistant, aluminized-

steel tubular construction to provide long-life, trouble-free

operation. The unique blow-through design also assures that

condensate does not collect in humid areas when in the cool-

ing cycle. This adds to longer heat exchanger life and higher

long term efficiencies.

POST PURGE INDUCED DRAFT COMBUSTION - Exhausts

combustion products from the heat exchanger upon comple-

tion of the heating cycle to prolong the heat exchanger life.

SINGLE ENTHALPY SENSOR - Sensor replaces dry bulb

sensor standard in economizer kit. Provides improved econo-

mizer operation by sensing the dry bulb temperature from

outdoors plus the enthalpy content of the outdoor air.

SELF DIAGNOSTIC FAN CONTROL MODULE - Due to this

self diagnostic control, less on site time is required to trouble

shoot these units.

DUAL ENTHALPY SENSOR - Additional sensor to single

enthalpy sensor. Sensor senses both the return air tempera-

ture dry bulb and humidity in conjunction with the single

enthalpy to determine the most economical mix. Single

Enthalpy sensor also required.

SPARK TO PILOT IGNITION - Provides faster heat delivery.

This ignition is highly reliable, durable and eliminates nui-

sance lockouts.

MULTI PORT IN-SHOT BURNERS - No field adjustment is

required to mix the air and gas. These burners are con-

structed of high-grade corrosion-resistant, aluminized-steel.

PRESSURE SWITCH UPGRADE KIT - Contains screw in

type High pressure, Low Pressure/Loss of Charge switch,

freeze protection switch and lockout relay. Switches are

placed onto existing scharder ports located in the unit by fur-

nished adapters. When abnormal conditions are sensed

through the pressure switches, the unit will lock out prevent-

ing any further operation until reset or problem is corrected.

Package agency approved.

LOW MAINTENANCE - Long life, permanently lubricated

condenser and evaporator fan motor bearings need no

annual maintenance adding greater reliability to the unit.

Blower assembly can be easily cleaned by the unique Slip-

Track slide-out blower assembly.

SECURED SERVICE ACCESS PORTS - Protected, exter-

nally mounted, re-usable service access ports are provided

on both the high and low lines for ease of evacuating and

charging the system. No final field mounting required.

HAIL GUARD KIT - Kit contains protective grilles made of

expanded aluminum with full perimeter frame. Sloped hoods

are also included to assure maximum protection.

EASY SERVICE ACCESS - A large, single panel covers the

electrical and gas controls makes servicing easy. The blower

ANTI SHORT CYCLE TIMER - Automatically prevents the

compressor from restarting for 5 minutes after cycled off.Not

Johnson Controls Unitary Products

292443-XTG-D-0508

required if Thermostat 2ET07700224 and 2ET04700224 are

used.

ROOF CURBS - NRCA approved curbs provide proper fit to

base unit for rooftop installations. Curbs are designed to be

assembled through hinge pins in each corner. Kit also pro-

vides seal strip to assure a water tight seal. 8 and 14 inch

high roof curbs are available.

MOTORIZED FRESH AIR DAMPER - Designed for duct

mounted side supply/return and unit mounted down supply/

return applications. Damper capable of providing 0% through

50% of outdoor air (field supplied). Closes on power loss,

includes hood and screen assembly.

MANUAL OUTDOOR DAMPER - Provides 0% through 50%

outdoor air capability (field adjustable). Designed for duct

mounted side supply/return applications. Includes hood and

screen assembly.

FILTER / FRAME KIT (Single Phase only) - Kit contains the

necessary hardware to field install return air filters into the

base unit. Pre-cut filter racks and appropriate cleanable stan-

dard size filters are shipped in one kit. The fiter rack is suit-

able for either 1” or 2” filters (1” filter is supplied). This kit is

available for single phase horizontal or vertical duct applica-

tion only. Standard in all 3 phase models

WALL THERMOSTAT - The units are designed to operate

with 24-volt electronic and electro-mechanical thermostats.

All units can operate with single stage heat / single stage cool

thermostats - with or without the economizer.

LOW AMBIENT KIT - Kit provides necessary hardware to

convert unit to operate in cooling cycle down to 0 F. Standard

unit operation 45 F.

RECTANGLE TO ROUND ADAPTERS - Kit includes one

supply and one return air rectangle to round duct adapter.

Adapters are preformed and designed to fit over current duct

openings on the base unit. Transition is from side square duct

opening to 14" round duct opening.

TRANSFORMER KIT - Kit provides necessary hardware to pro-

vide single phase models from factory furnished 40 VA trans-

former capability to 75 VA transformer capability. (Required on

installations with economizer or motorized damper.)

DIRECT DRIVE

CONDENSER FAN

MOTOR

BLOW-THROUGH DESIGN

WITH RELIABLE ALUMINIZED

STEEL TUBULAR HEAT

EXCHANGERS

HIGHLY EFFICIENT

ENHANCER

COPPER TUBE/ALUMINUM FIN

EVAPORATOR COIL

HIGHLY EFFICIENT

ENHANCED COPPER

TUBE/ALUMINUM FIN

CONDENSER COIL

LONG-LASTING

POWDER PAINT

FINISH

DECORATIVE

PROTECTIVE

COIL GUARD

REAR & BOTTOM

RETURN AIR

AND SUPPLY AIR

DUCT OPENINGS

HIGH EFFICIENCY

COMPRESSOR

RIGIDLY MOUNTED

PILOT ASSEMBLY

HEAVY GAUGE

REMOVEABLE

BASE RAILS

HIGH GRADE

ALUMINIZED

IN-SHOT BURNERS

LOW VOLTAGE

TERMINAL BLOCK

3-SPEED DIRECT DRIVE

BLOWER MOTOR WITH

SELF-DIAGNOSTIC CONTROLS

WITH "COMFORT MATCH" SPEED

CONTROL

SLIDE-OUT BLOWER ASSEMBLY

AUTOMATIC

GAS VALVE

POWER VENTER MOTOR

HIGH VOLTAGE

TERMINAL BLOCK

(1/2"- 14NPTI)

FIGURE 2 - UNIT COMPONENT LOCATION

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 1: PHYSICAL DATA

DNA

042

MODEL

030

10 x 8

1/2

036

11 x 10

3/4

048

060

CENTRIFUGAL BLOWER (Dia. x W. in.)

FAN MOTOR HP (3 Speed)

ROWS DEEP

11 x 10

3/4

12 x 11

EVAPORATOR

BLOWER

EVAPORATOR

COIL

FINS PER INCH

FACE AREA (Sq. Ft.)

3.5

4.5

PROPELLER DIA. (in.)

CONDENSER

FAN

FAN MOTOR HP

1/4

NOM. CFM TOTAL

2,400

3,000

ROWS DEEP

CONDENSER

COIL

FINS PER INCH

FACE AREA (Sq. Ft.)

11.7

4 / 12

2.6/20x20

11.7

4 / 3

2.6/20x20

11.7

4 / 9

2.6/20x20

14.8

6 / 0

3.3/20x12

14.8

5 / 4

3.3/20x12

CHARGE

REFRIGERANT 22 (lbs./oz.)

FACE AREA (Sq. Ft.) Size (Nominal)

NATURAL GAS BURNER ORIFICE NO. (Drill Size)

PROPANE BURNER ORIFICE NO. (Drill Size)

GAS CONNECTION SIZE

FILTER

FURNACE

SECTION

1/2 NPTI

COMPRESSOR

TYPE

HERMETICALLY SEALED

(R = RECIPROCATING, S = SCROLL)

1. See FILTER/FRAME KIT on page 5.

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 2: RATINGS COOLING/GAS HEATING

GAS HEAT CAPACITY / EFFICIENCIES

NET COOLING CAPACITY

SOUND

MODEL

DNA

TEMP.

RISE

RATING

INPUT

(MBH)

OUTPUT

(MBH)

NUMBER OF

BURNERS

AFUE

(%)

MBH

EER

(dbels)

(°F) RANGE

030N03606

030N05606

036N03606

036N05606

036N07206

036N03625

036N03646

036N05625

036N05646

036N07225

036N07246

042N03606

042N05606

042N07206

042N03625

042N03646

042N05625

042N05646

042N07225

042N07246

048N06506

048N09006

048N11006

048N06525

048N06546

048N09025

048N09046

048N11025

048N11046

060N06506

060N09006

060N11006

060N06525

060N06546

060N09025

060N09046

060N11025

060N11046

108

80.2

80.4

80.2

80.1

80.4

80.2

80.1

80.4

80.2

80.1

80.4

80.2

80.1

25 - 55

30 - 60

25 - 55

30 - 60

25 - 55

30 - 60

25 - 55

30 - 60

25 - 55

30 - 60

25 - 55

30 - 60

35 - 65

25 - 55

30 - 60

35 - 65

25 - 55

30 - 60

35 - 65

25 - 55

30 - 60

35 - 65

34.8

40.5

46.5

56.5

8.9

8.6

8.9

108

135

108

135

108

135

108

135

1. Net Cooling Capacity = ARI 210 standard rating conditions.

2. (dbels) = ARI 270-95

3. Energy Efficiency Ratio - the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total

electric power input in watt-hours during the same period.

4. AFUE = Annual Fuel Utilization Efficiency.

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 3: DNA030 COOLING CAPACITIES - 2-1/2 TON

AIR ON EVAPORATOR COIL

TEMPERATURE

OF AIR ON

CONDENSER COIL

750 CFM

WB °F

875 CFM

WB °F

1,000 CFM

WB °F

1,125 CFM

WB °F

1,250 CFM

WB °F

NET CAP.

MBH

28.1 26.4 24.2 22.6 30.6 28.7 26.3 24.5 32.9 31.0 28.3 26.4 33.2 31.2 28.6 26.7 33.5 31.5 28.8 26.9

2.99 2.95 2.90 2.89 3.03 2.99 2.94 2.93 3.06 3.02 2.97 2.96 3.13 3.09 3.04 3.03 3.20 3.16 3.11 3.10

TOTAL POWER

INPUT kW

86 15.3 19.8 23.6 22.6 18.6 23.6 26.0 24.5 21.9 27.4 28.3 26.4 21.1 26.8 28.6 26.7 20.2 26.2 28.8 26.9

83 14.5 19.0 22.8 21.9 17.0 21.9 25.6 24.2 19.4 24.9 28.3 26.4 19.3 25.1 28.6 26.7 19.3 25.2 28.8 26.9

80 13.7 18.2 22.1 21.2 15.3 20.3 24.6 23.6 16.9 22.4 27.2 26.1 17.6 23.3 28.0 26.5 18.3 24.2 28.8 26.9

77 13.0 17.4 21.3 20.4 13.7 18.7 23.0 22.0 14.5 20.0 24.7 23.6 15.9 21.6 26.3 24.8 17.3 23.3 27.8 25.9

74 12.2 16.7 20.5 19.6 12.1 17.1 21.4 20.4 12.0 17.5 22.2 21.1 14.2 19.9 24.6 23.0 16.4 22.3 26.9 24.9

85 °F

15.9 19.7 18.8

15.1 19.0 18.1

15.5 19.8 18.7

13.8 18.1 17.1

15.0 19.8 18.7

12.6 17.3 16.2

18.2 22.8 21.3

16.5 21.1 19.6

21.3 25.9 24.0

20.4 24.9 23.0

NET CAP.

MBH

26.8 25.0 22.3 21.4 29.2 27.3 24.3 23.4 31.7 29.6 26.4 25.4 32.0 29.9 26.6 25.6 32.2 30.1 26.8 25.8

3.18 3.14 3.08 3.07 3.22 3.18 3.11 3.11 3.26 3.22 3.15 3.15 3.34 3.30 3.23 3.22 3.42 3.38 3.30 3.30

TOTAL POWER

INPUT kW

86 17.9 22.3 22.3 21.4 19.9 24.9 24.3 23.4 22.0 27.5 26.4 25.4 21.0 26.7 26.6 25.6 19.9 25.9 26.8 25.8

83 15.6 20.1 22.3 21.4 17.5 22.5 24.3 23.4 19.3 24.9 26.4 25.4 19.1 24.9 26.6 25.6 19.0 24.9 26.8 25.8

80 13.4 17.8 21.0 20.0 15.0 20.0 23.6 22.4 16.6 22.2 26.1 24.8 17.3 23.1 16.5 25.3 18.0 24.0 26.8 25.8

77 11.1 15.6 18.8 17.7 12.6 17.5 21.1 19.9 14.0 19.5 23.5 22.2 15.5 21.2 24.6 23.5 17.0 23.0 25.8 24.8

74 8.9 13.4 16.5 15.5 10.1 15.1 18.7 17.5 11.3 16.8 20.8 19.5 13.7 19.4 22.8 21.7 16.0 22.0 24.9 23.9

95 °F

11.1 14.3 13.3

8.9 12.1 11.0

12.6 16.2 15.0

10.2 13.7 12.6

14.1 18.1 16.8

11.5 15.4 14.1

17.6 21.0 19.8

15.8 19.2 18.0

21.0 23.9 22.9

20.1 22.9 21.9

NET CAP.

MBH

25.4 23.0 20.6 20.1 27.7 25.0 22.5 21.9 30.0 27.1 24.4 23.8 30.4 27.4 24.7 24.0 30.7 27.8 25.0 24.3

2.94 3.31 3.23 3.24 2.98 3.36 3.28 3.29 3.03 3.41 3.33 3.34 3.10 3.49 3.41 3.42 3.17 3.57 3.48 3.49

TOTAL POWER

INPUT kW

86 15.9 20.0 20.6 20.1 17.7 22.3 22.5 21.9 19.6 24.7 24.4 23.8 19.5 24.9 24.7 24.0 19.5 25.1 25.0 24.3

83 14.4 18.5 20.5 19.9 16.1 20.7 22.5 21.8 17.8 22.9 24.4 23.8 18.2 23.5 24.7 24.0 18.6 24.1 25.0 24.3

80 13.0 17.1 19.6 18.8 14.5 19.1 21.9 21.0 16.1 21.2 24.3 23.3 16.9 22.2 24.6 23.8 17.6 23.2 25.0 24.3

77 11.5 15.6 18.1 17.3 12.9 17.5 20.3 19.5 14.4 19.5 22.5 21.6 15.5 20.9 23.3 22.5 16.7 22.2 24.0 23.4

74 10.1 14.2 16.6 15.9 11.3 15.9 18.7 17.9 12.6 17.7 20.8 19.8 14.2 19.5 21.9 21.1 15.7 21.3 23.1 22.4

105 °F

115 °F

125 °F

12.7 15.2 14.4

11.3 13.7 13.0

14.3 17.1 16.3

12.7 15.5 14.7

16.0 19.0 18.1

14.2 17.3 16.3

18.2 20.6 19.8

16.8 19.2 18.4

20.4 22.1 21.5

19.4 21.2 20.6

NET CAP.

MBH

24.1 20.9 19.0 18.8 26.2 22.8 20.7 20.5 28.3 24.6 22.4 22.1 28.8 25.0 22.7 22.5 29.2 25.4 23.1 22.8

2.70 3.47 3.38 3.40 2.75 3.53 3.44 3.47 2.80 3.60 3.50 3.53 2.86 3.68 3.58 3.61 2.92 3.76 3.66 3.69

TOTAL POWER

INPUT kW

86 13.9 17.7 19.0 18.8 15.5 19.7 20.7 20.5 17.2 21.8 22.4 22.1 18.1 23.0 22.7 22.5 19.1 24.2 23.1 22.8

83 13.2 17.0 18.8 18.3 14.8 19.0 20.6 20.2 16.4 21.0 22.4 22.1 17.3 22.2 22.7 22.5 18.2 23.3 23.1 22.8

80 12.6 16.3 18.1 17.6 14.1 18.3 20.2 19.7 15.6 20.2 22.4 21.8 16.4 21.3 22.7 22.3 17.3 22.4 23.1 22.8

77 11.9 15.7 17.4 16.9 13.3 17.5 19.5 19.0 14.8 19.4 21.6 21.0 15.6 20.5 21.9 21.5 16.3 21.5 22.2 21.9

74 11.2 15.0 16.7 16.3 12.6 16.8 18.8 18.2 13.9 13.6 20.8 20.2 14.7 19.6 21.0 20.6 15.4 20.6 21.3 21.0

14.3 16.1 15.6

13.6 15.4 14.9

16.1 18.0 17.5

15.3 17.3 16.7

17.8 20.0 19.4

17.0 19.2 18.6

18.7 20.2 19.7

17.9 19.3 18.9

19.7 20.4 20.1

18.8 19.5 19.2

NET CAP.

MBH

22.7 18.9 17.4 17.5 24.7 20.5 18.9 19.0 26.6 22.2 20.4 20.5 27.2 22.6 20.8 20.9 27.7 23.1 21.3 21.4

2.45 3.63 3.53 3.57 2.51 3.71 3.60 3.64 2.56 3.79 3.68 3.72 2.62 3.87 3.76 3.80 2.68 3.96 3.84 3.89

TOTAL POWER

INPUT kW

86 11.9 15.3 17.4 17.5 13.3 17.2 18.9 19.0 14.7 19.0 20.4 20.5 16.7 21.2 20.8 20.9 18.9 23.4 21.3 21.4

83 12.0 15.5 17.0 16.7 13.5 17.3 18.7 18.6 14.9 19.1 20.4 20.5 16.3 20.8 20.8 20.9 17.8 22.5 21.3 21.4

80 12.2 15.6 16.6 16.4 13.6 17.4 18.6 18.3 15.0 19.2 20.5 20.2 16.0 20.4 20.9 20.8 16.9 21.7 21.3 21.4

77 12.3 15.7 16.7 16.5 13.7 17.5 18.7 18.5 15.1 19.4 20.7 20.4 15.6 20.1 20.5 20.4 16.0 20.8 20.4 20.5

74 12.4 15.8 16.9 16.8 13.8 17.6 18.8 18.6 15.3 19.5 20.8 20.5 15.2 19.7 20.1 20.1 15.1 19.9 19.5 19.6

15.9 17.0 16.7

16.0 17.1 16.9

17.8 18.9 18.7

17.9 19.1 18.8

19.6 20.9 20.7

19.8 21.1 20.8

19.3 19.8 19.7

19.0 19.4 19.3

19.0 18.6 18.7

18.1 17.7 17.8

ALL SENSIBLE CAPACITY

1. These capacities are net capacities (the indoor fan heat is deducted).

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 4: DNA036 COOLING CAPACITIES - 3 TON

AIR ON EVAPORATOR COIL

1,200 CFM

TEMPERATURE

OF AIR ON

CONDENSER COIL

900 CFM

WB °F

1,050 CFM

WB °F

1,350 CFM

WB °F

1,500 CFM

WB °F

NET CAP.

MBH

36.7 34.6 31.9 30.3 37.9 35.7 32.9 31.3 39.1 36.9 34.0 32.3 39.4 37.1 34.2 32.5 39.6 37.4 34.4 32.7

3.57 3.51 3.44 3.41 3.64 3.58 3.51 3.48 3.71 3.65 3.58 3.55 3.80 3.73 3.66 3.63 3.88 3.82 3.74 3.71

TOTAL POWER

INPUT kW

86 19.8 25.2 29.9 30.3 23.0 28.7 32.0 31.3 26.1 32.1 34.0 32.3 24.8 31.0 34.2 32.5 23.5 29.9 34.4 32.7

83 18.9 24.3 29.0 29.7 21.0 26.7 31.5 31.0 23.1 29.2 34.0 32.3 22.8 29.0 34.2 32.5 22.4 28.8 34.4 32.7

80 18.0 23.4 28.1 28.8 19.1 24.8 29.8 30.5 20.1 26.2 31.5 32.3 20.7 27.0 32.4 32.5 21.3 27.7 33.3 32.7

77 17.1 22.4 27.2 27.9 17.1 22.8 27.8 28.6 17.2 23.2 28.5 29.3 18.7 24.9 30.4 30.5 20.2 26.6 32.2 31.6

74 16.1 21.5 26.2 26.9 15.2 20.9 25.9 26.6 14.2 20.2 25.5 26.3 16.7 22.9 28.3 28.4 19.1 25.5 31.1 30.5

85 °F

20.6 25.3 26.0

19.7 24.4 25.1

18.9 23.9 24.7

17.0 22.0 22.7

17.3 22.6 23.4

14.3 19.6 20.4

20.9 26.3 26.4

18.8 24.3 24.4

24.4 30.0 29.4

23.3 28.9 28.3

NET CAP.

MBH

36.9 34.1 31.4 31.2 37.3 34.5 31.8 31.5 37.7 34.9 32.1 31.9 38.3 35.5 32.6 32.4 39.0 36.1 33.2 32.9

3.77 3.73 3.64 3.61 3.86 3.81 3.72 3.69 3.95 3.90 3.81 3.77 4.03 3.98 3.88 3.85 4.11 4.06 3.96 3.93

TOTAL POWER

INPUT kW

86 23.8 29.2 31.4 31.2 25.1 30.8 31.8 31.5 26.5 32.4 32.1 31.9 25.1 31.2 32.6 32.4 23.6 30.0 33.2 32.9

83 21.1 26.5 31.2 31.2 22.2 27.8 31.7 31.5 23.3 29.2 32.1 31.9 22.9 29.0 32.6 32.4 22.5 28.9 33.2 32.9

80 18.4 23.8 28.5 29.3 19.2 24.9 29.8 30.6 20.0 26.0 31.1 31.9 20.7 26.9 32.1 32.4 21.4 27.8 33.2 32.9

77 15.7 21.1 25.9 26.6 16.3 21.9 26.9 27.6 16.8 22.7 27.9 28.7 18.6 24.7 30.0 30.3 20.3 26.7 32.1 31.8

74 13.0 18.5 23.2 23.9 13.3 19.0 23.9 24.7 13.6 19.5 24.7 25.5 16.4 22.5 27.8 28.1 19.2 25.6 31.0 30.7

95 °F

15.8 20.5 21.2

13.1 17.8 18.5

16.0 21.0 21.7

13.1 18.0 18.8

16.3 21.4 22.2

13.1 18.2 19.0

20.4 25.7 25.9

18.2 23.5 23.8

24.5 29.9 29.6

23.4 28.8 28.5

NET CAP.

MBH

34.9 32.6 30.7 29.6 35.3 32.9 31.0 29.9 35.6 33.2 31.3 30.2 36.1 33.6 31.7 30.6 36.5 34.0 32.1 30.9

4.00 3.93 3.84 3.83 4.09 4.01 3.93 3.91 4.18 4.10 4.01 3.99 4.26 4.18 4.09 4.07 4.34 4.26 4.17 4.15

TOTAL POWER

INPUT kW

86 21.1 27.2 29.8 28.8 22.4 28.7 30.6 29.5 23.7 30.3 31.3 30.2 23.2 30.1 31.7 30.6 22.8 29.8 32.1 30.9

83 19.4 25.4 29.3 28.4 20.5 26.8 30.3 29.3 21.6 28.2 31.3 30.2 21.6 28.5 31.7 30.6 21.7 28.7 32.1 30.9

80 17.7 23.7 27.6 27.0 18.6 24.9 29.0 28.4 19.5 26.1 30.4 29.8 20.1 26.9 31.2 30.4 20.6 27.7 32.1 30.9

77 15.9 21.9 25.8 25.3 16.6 23.0 27.1 26.5 17.4 24.0 28.3 27.7 18.5 25.3 29.7 28.8 19.6 26.6 31.0 29.8

74 14.2 20.2 24.1 23.5 14.7 21.0 25.1 24.6 15.3 21.9 26.2 25.6 16.9 23.7 28.1 27.2 18.5 25.5 29.9 28.8

105 °F

115 °F

125 °F

18.4 22.3 21.8

16.7 20.6 20.0

19.1 23.2 22.7

17.2 21.3 20.7

19.8 24.1 23.5

17.7 22.0 21.4

22.2 26.5 25.6

20.6 24.9 24.0

24.5 28.9 27.7

23.4 27.8 26.7

NET CAP.

MBH

33.0 31.0 30.0 28.0 33.3 31.3 30.3 28.2 33.5 31.6 30.6 28.5 33.8 31.8 30.8 28.7 34.0 32.0 31.0 28.9

4.24 4.13 4.05 4.04 4.32 4.22 4.13 4.12 4.41 4.30 4.22 4.21 4.50 4.38 4.30 4.29 4.58 4.47 4.38 4.37

TOTAL POWER

INPUT kW

86 18.5 25.1 28.2 26.4 19.7 26.7 29.4 27.4 20.9 28.2 30.6 28.5 21.4 28.9 30.8 28.7 21.9 29.6 31.0 28.9

83 17.7 24.3 27.4 25.6 18.8 25.8 29.0 27.0 19.9 27.3 30.6 28.5 20.4 27.9 30.8 28.7 20.9 28.6 31.0 28.9

80 16.9 23.5 26.6 24.8 17.9 24.9 28.1 26.2 18.9 26.3 29.7 27.7 19.4 26.9 30.3 28.3 19.9 27.6 31.0 28.9

77 16.1 22.7 25.8 24.0 17.0 24.0 27.2 25.4 17.9 25.3 28.7 26.7 18.4 25.9 29.3 27.3 18.8 26.6 30.0 27.9

74 15.3 21.9 24.9 23.2 16.1 23.1 26.4 24.5 17.0 24.3 27.8 25.8 17.4 24.9 28.3 26.3 17.8 25.5 28.9 26.8

21.1 24.1 22.4

20.3 23.3 21.6

22.2 25.5 23.6

21.3 24.6 22.7

23.4 26.8 24.8

22.4 25.8 23.8

23.9 27.3 25.3

22.9 26.3 24.3

24.5 27.9 25.8

23.5 26.9 24.8

NET CAP.

MBH

31.0 29.4 29.3 26.4 31.2 29.7 29.6 26.6 31.4 29.9 29.8 26.8 31.5 29.9 29.8 26.8 31.5 30.0 29.9 26.9

4.47 4.33 4.26 4.26 4.55 4.42 4.34 4.34 4.64 4.50 4.42 4.42 4.73 4.59 4.51 4.51 4.82 4.68 4.59 4.60

TOTAL POWER

INPUT kW

86 15.9 23.1 26.6 24.0 17.0 24.6 28.2 25.4 18.1 26.1 29.8 26.8 19.6 27.8 29.8 26.8 21.1 29.5 29.9 26.9

83 16.0 23.2 25.4 22.8 17.1 24.8 27.6 24.8 18.2 26.3 29.8 26.8 19.1 27.4 29.8 26.8 20.1 28.5 29.9 26.9

80 16.2 23.3 25.6 22.5 17.3 24.9 27.3 24.1 18.4 26.5 29.0 25.6 18.7 27.0 29.5 26.2 19.1 27.5 29.9 26.9

77 16.3 23.5 25.7 22.7 17.4 25.0 27.4 24.2 18.5 26.6 29.2 25.8 18.3 26.6 29.0 25.8 18.1 26.5 28.9 25.9

74 16.4 23.6 25.8 22.8 17.6 25.2 27.6 24.4 18.7 26.8 29.3 25.9 17.9 26.1 28.6 25.4 17.1 25.5 27.9 24.9

23.7 26.0 22.9

23.9 26.1 23.1

25.3 27.7 24.5

25.5 27.9 24.7

26.9 29.5 26.1

27.1 29.6 26.2

25.7 28.2 25.0

25.3 27.8 24.6

24.5 26.9 23.9

23.5 25.9 22.9

ALL SENSIBLE CAPACITY

1. These capacities are net capacities (the indoor fan heat is deducted).

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 5: DNA042 COOLING CAPACITIES - 3-1/2 TON

AIR ON EVAPORATOR COIL

TEMPERATURE

OF AIR ON

CONDENSER COIL

1,050 CFM

WB °F

1,225 CFM

WB °F

1,400 CFM

WB °F

1,575 CFM

WB °F

1,750 CFM

WB °F

NET CAP.

MBH

44.5 40.8 37.6 36.5 46.0 42.2 38.8 37.7 47.5 43.6 40.1 38.9 48.9 44.9 41.3 40.1 50.3 46.2 42.5 41.2

4.01 4.00 3.85 3.85 4.16 4.15 4.00 4.00 4.31 4.31 4.15 4.15 4.36 4.35 4.19 4.19 4.40 4.39 4.23 4.23

TOTAL POWER

INPUT kW

86 23.6 29.7 35.1 35.9 27.6 34.2 37.6 37.4 31.6 38.6 40.1 38.9 31.0 38.5 41.3 40.1 30.5 38.4 42.5 41.2

83 22.5 28.6 34.0 34.8 25.3 31.9 37.0 36.8 28.1 35.1 40.1 38.9 28.6 36.1 41.3 40.1 29.1 37.1 42.5 41.2

80 21.4 27.5 32.9 33.7 23.0 29.6 35.4 36.2 24.6 31.7 37.9 38.8 26.2 33.7 40.2 40.0 27.8 35.7 42.5 41.2

77 20.3 26.4 31.8 32.6 20.7 27.3 33.1 34.0 21.2 28.2 34.4 35.3 23.8 31.3 37.8 37.6 26.4 34.3 41.1 39.9

74 19.2 25.4 30.7 31.5 18.5 25.1 30.8 31.7 17.7 24.7 30.9 31.8 21.4 28.9 35.3 35.2 25.0 33.0 39.7 38.5

85 °F

24.3 29.7 30.4

23.2 28.6 29.4

22.8 28.6 29.4

20.5 26.3 27.1

21.3 27.5 28.4

17.8 24.0 24.9

26.4 32.9 32.8

24.0 30.5 30.3

31.6 38.4 37.2

30.2 37.0 35.8

NET CAP.

MBH

41.5 38.0 34.6 35.0 43.2 39.6 36.0 36.4 44.9 41.1 37.3 37.8 46.1 42.2 38.3 38.8 47.2 43.2 39.3 39.8

4.24 4.22 4.07 4.10 4.40 4.38 4.22 4.25 4.56 4.54 4.38 4.40 4.62 4.60 4.43 4.46 4.68 4.66 4.49 4.52

TOTAL POWER

INPUT kW

86 26.5 32.7 34.6 35.0 29.0 35.7 36.0 36.4 31.4 38.7 37.3 37.8 30.3 38.0 38.3 38.8 29.2 37.3 39.3 39.8

83 23.4 29.6 33.8 34.1 25.5 32.3 35.6 36.0 27.6 34.9 37.3 37.8 27.7 35.4 38.3 38.8 27.8 35.9 39.3 39.8

80 20.3 26.5 30.7 31.0 22.1 28.8 33.4 33.8 23.9 31.2 36.1 36.5 25.2 32.9 37.7 38.2 26.5 34.6 39.3 39.8

77 17.1 23.3 27.6 27.9 18.6 25.4 30.0 30.3 20.1 27.4 32.4 32.8 22.6 30.3 35.2 35.6 25.1 33.2 37.9 38.4

74 14.0 20.2 24.4 24.7 15.2 21.9 26.5 26.9 16.3 23.7 28.6 29.0 20.0 27.7 32.6 33.0 23.7 31.8 36.6 37.1

95 °F

17.1 21.3 21.6

13.9 18.1 18.5

18.5 23.1 23.4

15.0 19.6 20.0

19.9 24.9 25.2

16.1 21.1 21.5

25.2 30.0 30.5

22.6 27.5 27.9

30.4 35.2 35.7

29.1 33.8 34.3

NET CAP.

MBH

38.7 34.7 32.2 33.0 40.3 36.1 33.5 34.3 41.8 37.5 34.8 35.6 42.8 38.4 35.6 36.5 43.8 39.2 36.5 37.3

4.51 4.44 4.34 4.34 4.67 4.59 4.49 4.49 4.82 4.74 4.63 4.64 4.90 4.82 4.71 4.71 4.98 4.90 4.78 4.79

TOTAL POWER

INPUT kW

86 23.6 29.4 31.7 31.8 25.7 32.0 33.3 33.7 27.8 34.6 34.8 35.6 28.0 35.1 35.6 36.4 28.1 35.7 36.5 37.3

83 21.5 27.3 30.9 30.9 23.4 29.7 32.9 32.9 25.3 32.1 34.8 35.0 26.1 33.2 35.6 36.2 26.8 34.4 36.5 37.3

80 19.5 25.3 28.9 28.8 21.2 27.5 31.4 31.3 22.9 29.7 33.8 33.8 24.2 31.3 35.2 35.5 25.5 33.0 36.5 37.3

77 17.5 23.3 26.8 26.8 18.9 25.2 29.1 29.1 20.4 27.2 31.4 31.4 22.3 29.5 33.3 33.7 24.1 31.7 35.1 36.0

74 15.4 21.2 24.8 24.7 16.7 23.0 26.9 26.8 18.0 24.8 28.9 28.9 20.4 27.6 31.4 31.8 22.8 30.4 33.8 34.6

105 °F

115 °F

125 °F

19.2 22.7 22.7

17.1 20.7 20.7

20.7 24.6 24.6

18.5 22.4 22.3

22.3 26.5 26.5

19.9 24.0 24.0

25.7 29.5 29.9

23.8 27.6 28.0

29.0 32.5 33.3

27.7 31.1 32.0

NET CAP.

MBH

35.9 31.3 29.9 30.9 37.3 32.6 31.1 32.2 38.8 33.9 32.3 33.4 39.6 34.5 33.0 34.1 40.3 34.2 33.6 34.8

4.78 4.66 4.61 4.59 4.93 4.80 4.75 4.73 5.08 4.95 4.89 4.87 5.18 5.04 4.99 4.97 5.27 5.14 5.08 5.06

TOTAL POWER

INPUT kW

86 20.6 26.0 28.9 28.5 22.4 28.2 30.6 31.0 24.2 30.4 32.3 33.4 25.6 32.3 33.0 34.1 27.1 34.1 33.6 34.8

83 19.7 25.1 28.0 27.6 21.4 27.2 30.1 29.9 23.0 29.3 32.3 32.2 24.4 31.0 33.0 33.5 25.8 32.8 33.6 34.8

80 18.7 24.1 27.0 26.6 20.3 26.1 29.3 28.9 21.9 28.2 31.6 31.1 23.2 29.8 32.6 32.9 24.5 31.5 33.6 34.8

77 17.8 23.2 26.1 25.7 19.3 25.1 28.2 27.8 20.7 27.0 30.4 30.0 22.0 28.6 31.4 31.7 23.2 30.2 32.3 33.5

74 16.9 22.2 25.1 24.8 18.2 24.0 27.2 29.8 19.6 25.9 29.3 28.8 20.8 27.4 30.1 30.5 21.9 28.9 31.0 32.2

21.3 24.2 23.8

20.3 23.2 22.9

23.0 26.2 25.7

22.0 25.1 24.7

24.7 28.1 27.7

23.6 27.0 26.5

26.2 28.9 29.3

25.0 27.7 28.1

27.6 29.7 30.9

26.4 28.5 29.6

NET CAP.

MBH

33.0 27.9 27.5 28.9 34.4 29.1 28.7 30.1 35.8 30.3 29.8 31.3 36.3 30.7 30.3 31.7 36.9 31.2 30.7 32.2

5.05 4.88 4.87 4.83 5.19 5.02 5.01 4.97 5.34 5.16 5.15 5.11 5.45 5.27 5.26 5.22 5.57 5.38 5.37 5.33

TOTAL POWER

INPUT kW

86 17.7 22.6 26.1 25.3 19.1 24.5 27.9 28.2 20.6 26.3 29.8 31.2 23.3 29.4 30.3 31.7 26.0 32.5 30.7 32.2

83 17.8 22.8 25.0 24.3 19.3 24.6 27.4 26.9 20.7 26.5 29.8 29.5 22.7 28.8 30.3 30.8 24.8 31.2 30.7 32.2

80 18.0 22.9 25.2 24.4 19.4 24.8 27.2 26.4 20.9 26.6 29.3 28.4 22.2 28.3 30.0 30.3 23.5 30.0 30.7 32.2

77 18.1 23.1 25.3 24.6 19.6 24.9 27.4 26.6 21.1 26.8 29.4 28.6 21.7 27.8 29.5 29.8 22.3 28.7 29.5 31.0

74 18.3 23.2 25.5 24.8 19.8 25.1 27.5 26.7 21.2 27.0 29.6 28.7 21.1 27.2 28.9 29.2 21.0 27.5 28.2 29.7

23.4 25.6 24.9

23.5 25.8 25.1

25.3 27.7 26.9

25.4 27.9 27.1

27.2 29.8 28.9

27.3 29.9 29.1

26.7 28.4 28.7

26.2 27.9 28.2

26.2 27.0 28.5

25.0 25.8 27.2

ALL SENSIBLE CAPACITY

1. These capacities are net capacities (the indoor fan heat is deducted).

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 6: DNA048 COOLING CAPACITIES - 4 TON

AIR ON EVAPORATOR COIL

1,600 CFM

TEMPERATURE

OF AIR ON

CONDENSER COIL

1,200 CFM

WB °F

1,400 CFM

WB °F

1,800 CFM

WB °F

2,000 CFM

WB °F

NET CAP.

MBH

48.5 45.0 41.0 41.6 49.9 46.3 42.2 42.8 51.3 47.6 43.4 44.0 52.4 48.7 44.4 44.9 53.5 49.7 45.3 45.9

3.99 3.93 3.87 3.86 4.01 3.95 3.88 3.88 4.02 3.96 3.90 3.89 4.04 3.97 3.91 3.91 4.05 3.99 3.92 3.92

TOTAL POWER

INPUT kW

86 28.9 36.8 41.0 41.6 31.9 40.5 42.2 42.8 34.9 44.1 43.4 44.0 38.0 46.9 44.4 44.9 41.0 49.7 45.3 45.9

83 25.5 33.4 40.3 41.2 27.8 36.4 41.9 42.6 30.2 39.4 43.4 44.0 32.7 42.5 44.4 44.9 35.1 45.6 45.3 45.9

80 22.0 30.0 36.9 37.8 23.8 32.4 39.8 40.9 25.6 34.8 42.8 43.9 27.3 37.2 44.1 44.9 29.1 39.6 45.3 45.9

77 18.6 26.5 33.4 34.4 19.8 28.3 35.8 36.8 20.9 30.1 38.1 39.2 22.0 31.9 38.7 39.6 23.1 33.6 39.4 40.0

74 15.2 23.1 30.0 31.0 15.7 24.3 31.7 32.8 16.2 25.4 33.5 34.6 16.7 26.6 33.4 34.3 17.2 27.7 33.4 34.0

85 °F

19.7 26.6 27.6

16.3 23.2 24.1

20.2 27.7 23.7

16.2 23.7 24.7

20.8 28.8 29.9

16.1 24.1 25.2

21.2 28.1 29.0

15.9 22.8 23.7

21.7 27.5 28.0

15.7 21.5 22.1

NET CAP.

MBH

43.5 41.9 36.3 36.9 46.1 44.4 38.6 39.1 48.8 47.0 40.8 41.4 48.6 46.8 40.6 41.2 48.3 46.5 40.4 40.9

4.44 4.34 4.32 4.32 4.44 4.34 4.32 4.32 4.43 4.33 4.31 4.47 4.37 4.37 4.35 4.35 4.50 4.41 4.38 4.39

TOTAL POWER

INPUT kW

86 27.2 35.6 36.3 36.9 30.7 40.1 38.6 39.1 34.3 44.7 40.8 41.4 36.8 45.6 40.6 41.2 39.2 46.5 40.4 40.9

83 23.7 32.2 36.3 36.9 26.7 36.1 38.6 39.1 29.7 40.0 40.8 41.4 31.5 42.3 40.6 41.2 33.3 44.6 40.4 40.9

80 20.3 28.8 33.1 33.6 22.7 32.1 36.9 37.4 25.0 35.4 40.7 41.3 26.2 37.0 40.5 41.1 27.3 38.6 40.4 40.9

77 16.9 25.3 29.7 30.2 18.6 28.0 32.9 33.4 20.3 30.7 36.1 36.6 20.8 31.7 35.2 35.8 21.3 32.7 34.4 35.0

74 13.5 21.9 26.3 26.7 14.6 24.0 28.8 29.3 15.7 26.0 31.4 32.0 15.5 26.4 29.9 30.5 15.4 26.7 28.4 29.0

95 °F

18.5 22.8 23.3

15.1 19.4 19.5

19.9 24.8 25.3

15.9 20.7 21.3

21.4 26.7 27.3

16.7 22.1 22.6

21.1 24.6 25.2

15.7 19.3 19.9

20.8 22.5 23.0

14.8 16.5 17.1

NET CAP.

MBH

42.2 39.2 35.7 36.0 44.1 40.9 37.2 37.5 45.9 42.6 38.8 39.1 46.4 43.1 39.2 39.5 47.0 43.6 39.7 40.0

4.94 4.85 4.81 4.81 4.95 4.85 4.81 4.82 4.95 4.86 4.82 4.83 4.98 4.89 4.84 4.85 5.00 4.91 4.87 4.89

TOTAL POWER

INPUT kW

86 26.7 34.8 35.7 36.0 30.1 38.1 37.2 37.5 33.4 41.5 38.8 39.1 36.1 42.5 39.2 39.5 38.8 43.6 39.7 40.0

83 23.3 31.3 35.3 35.6 26.0 34.9 37.0 37.3 28.7 38.4 38.8 39.1 30.8 40.5 39.2 39.5 32.8 42.6 39.7 40.0

80 19.9 27.9 32.0 32.2 22.0 30.8 35.3 35.6 24.1 33.8 38.7 39.0 25.5 35.7 39.2 39.5 26.9 37.7 39.7 40.0

77 16.5 24.5 28.6 28.8 17.9 26.8 31.3 31.6 19.4 29.1 34.0 34.3 20.2 30.4 33.9 34.2 20.9 31.7 33.7 34.0

74 13.0 21.1 25.1 25.4 13.9 22.8 27.2 27.5 14.7 24.4 29.4 29.7 14.8 25.1 28.6 28.9 14.9 25.8 27.8 28.1

105 °F

115 °F

125 °F

17.7 21.7 22.0

14.2 18.3 18.5

18.7 23.2 23.5

14.7 19.2 19.4

19.8 24.7 25.0

15.1 20.0 20.3

19.8 23.3 23.6

14.5 17.9 18.3

19.8 21.8 22.1

13.9 15.9 16.2

NET CAP.

MBH

41.0 36.5 35.0 35.1 42.0 37.3 35.9 35.9 43.0 38.2 36.7 36.8 44.3 39.4 37.9 37.9 45.7 40.6 39.0 39.1

5.44 5.35 5.29 5.30 5.46 5.37 5.31 5.32 5.47 5.39 5.33 5.34 5.49 5.40 5.34 5.35 5.50 5.42 5.35 5.37

TOTAL POWER

INPUT kW

86 26.3 33.9 35.0 35.1 29.4 36.1 35.9 35.9 32.5 38.2 36.7 36.8 35.4 39.4 37.9 37.9 38.4 40.6 39.0 39.1

83 22.9 30.5 34.3 34.3 25.3 33.7 35.5 35.5 27.8 36.9 36.7 36.8 30.1 38.7 37.9 37.9 32.4 40.6 39.0 39.1

80 19.5 27.1 30.8 30.9 21.3 29.6 33.7 33.6 23.1 32.1 36.7 36.7 24.8 34.9 37.8 37.9 26.4 36.8 39.0 39.1

77 16.0 23.7 27.4 27.5 17.2 25.6 29.7 29.8 18.5 27.5 32.0 32.0 19.5 29.2 32.5 32.6 20.5 30.8 33.1 33.1

74 12.6 20.6 24.0 24.0 13.2 21.5 25.7 25.7 13.8 22.9 27.3 27.4 14.2 23.9 27.2 27.3 14.5 24.9 27.1 27.2

16.8 20.6 20.6

13.4 17.2 17.2

17.5 21.6 21.7

13.5 17.6 17.6

18.2 22.7 22.7

13.5 18.0 18.1

18.5 21.9 22.0

13.2 16.6 16.6

18.9 21.1 21.2

12.9 15.2 15.2

NET CAP.

MBH

39.7 33.7 34.3 34.2 39.9 33.6 34.5 34.3 40.1 33.9 34.7 34.5 42.2 35.8 36.5 36.3 44.4 37.7 38.4 38.2

5.90 5.90 5.80 5.80 6.00 5.90 5.80 5.80 6.00 5.90 5.80 5.90 6.00 5.90 5.80 5.90 6.00 5.90 5.80 5.90

TOTAL POWER

INPUT kW

86 25.9 33.1 34.3 34.2 28.7 34.0 34.5 34.3 31.5 35.0 34.7 34.5 34.7 36.4 36.5 36.3 37.9 37.7 38.4 38.2

83 22.4 29.7 33.2 33.0 24.7 32.5 34.0 33.8 26.9 35.3 34.7 34.5 29.4 37.0 36.5 36.3 32.0 38.7 38.4 38.2

80 19.0 26.2 29.7 29.5 20.6 28.4 32.2 32.0 22.2 30.6 34.6 34.4 24.1 33.2 36.5 36.3 26.0 35.9 38.4 38.2

77 15.6 22.8 26.8 26.1 16.6 24.4 28.1 27.9 17.5 25.9 30.0 29.8 18.8 27.9 31.2 31.0 20.0 29.9 32.4 32.2

74 12.2 19.4 22.9 22.7 12.5 20.3 24.1 23.9 12.9 21.3 25.3 25.1 13.5 22.6 25.9 25.7 14.1 23.9 26.4 26.2

16.0 19.4 19.3

12.6 16.6 15.9

16.3 20.0 19.9

12.2 16.0 15.8

16.6 20.6 20.4

11.9 16.0 15.8

17.3 20.5 20.4

12.0 15.2 15.0

18.0 20.5 20.3

12.0 14.5 14.3

ALL SENSIBLE CAPACITY

1. These capacities are net capacities (the indoor fan heat is deducted).

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 7: DNA060 COOLING CAPACITIES - 5 TON

AIR ON EVAPORATOR COIL

2,000 CFM

TEMPERATURE

OF AIR ON

CONDENSER COIL

1,500 CFM

WB °F

1,750 CFM

WB °F

2,250 CFM

WB °F

2,500 CFM

WB °F

NET CAP.

MBH

60.3 56.2 52.0 51.1 62.4 58.1 53.8 52.9 64.4 60.0 55.5 54.6 65.4 60.9 56.4 55.5 66.5 61.8 57.3 56.3

5.67 5.58 5.48 5.50 5.80 5.71 5.61 5.63 5.93 5.83 5.73 5.75 6.11 6.01 5.91 5.93 6.30 6.20 6.09 6.11

TOTAL POWER

INPUT kW

86 39.5 47.7 52.0 51.1 43.5 52.3 53.8 52.9 47.5 56.9 55.5 54.6 50.9 59.4 56.4 55.5 54.3 61.8 57.3 56.3

83 35.2 43.4 50.6 50.9 38.4 47.2 53.1 52.7 41.6 51.0 55.5 54.6 44.3 54.1 56.4 55.5 46.9 57.2 57.3 56.3

80 31.0 39.1 46.4 46.6 33.4 42.2 50.0 50.2 35.8 45.2 53.6 53.9 37.6 47.5 55.4 55.1 39.4 49.8 57.3 56.3

77 26.7 34.8 42.1 42.3 28.3 37.1 44.9 45.2 30.0 39.4 47.8 48.1 31.0 40.9 48.8 48.5 32.0 42.3 49.8 48.9

74 22.4 30.5 37.8 38.0 23.3 32.0 39.9 40.1 24.2 33.6 42.0 42.2 24.3 34.2 42.2 41.8 24.5 34.9 42.4 41.4

85 °F

26.3 33.5 33.8

22.0 29.3 29.5

27.0 34.8 35.1

21.9 29.8 30.0

27.7 36.1 36.4

21.9 30.3 30.6

27.6 35.5 35.2 17.1 27.4 34.9 34.0

20.9 28.9 28.5 9.6 20.0 27.5 26.5

NET CAP.

MBH

57.6 53.0 49.0 48.5 59.5 54.7 50.7 50.1 61.5 56.5 52.3 51.7 62.4 57.3 53.1 52.4 63.3 58.1 53.9 53.2

6.14 6.11 5.96 6.01 6.30 6.27 6.11 6.16 6.45 6.42 6.26 6.32 6.62 6.59 6.43 6.49 6.80 6.76 6.60 6.65

TOTAL POWER

INPUT kW

86 37.6 46.8 49.0 48.5 41.5 51.4 50.7 50.1 45.3 56.0 52.3 51.7 48.6 57.1 53.1 52.4 51.8 58.1 53.9 53.2

83 33.3 42.5 48.6 48.2 36.4 46.4 50.5 50.0 39.5 50.2 52.3 51.7 41.9 53.1 53.1 52.4 44.4 56.1 53.9 53.2

80 29.1 38.3 44.4 43.9 31.4 41.3 47.9 47.4 33.7 44.3 51.4 50.9 35.3 46.5 52.6 52.1 36.9 48.6 53.9 53.2

77 24.8 34.0 40.1 39.7 26.3 36.2 42.8 42.4 27.8 38.5 45.5 45.1 28.7 39.8 46.0 45.4 29.5 41.2 46.4 45.7

74 20.5 29.7 35.8 35.4 21.3 31.2 37.8 37.3 22.0 32.7 39.7 39.2 22.0 33.2 39.3 38.8 22.0 33.7 38.9 38.3

95 °F

25.4 31.5 31.1

21.2 27.2 26.8

26.1 32.7 32.3

21.1 27.6 27.2

26.8 33.9 33.4

21.0 28.0 27.6

26.6 32.7 32.1

19.9 26.0 25.5

26.3 31.5 30.8

18.8 24.0 23.4

NET CAP.

MBH

53.0 48.8 45.0 42.7 55.0 50.7 46.8 44.3 57.1 52.5 48.5 45.9 57.6 53.1 49.0 46.4 58.2 53.6 49.5 46.9

6.85 6.74 6.64 6.64 6.99 6.88 6.78 6.78 7.14 7.03 6.93 6.92 7.34 7.22 7.12 7.12 7.54 7.42 7.31 7.31

TOTAL POWER

INPUT kW

86 36.1 45.1 45.0 42.7 39.9 48.7 46.8 44.3 43.7 52.3 48.5 45.9 46.9 53.0 49.0 46.4 50.1 53.6 49.5 46.9

83 31.8 40.8 44.8 42.6 34.9 44.6 46.7 44.2 37.9 48.4 48.5 45.9 40.3 50.5 49.0 46.4 42.6 52.6 49.5 46.9

80 27.6 36.5 41.5 39.4 29.8 39.5 44.9 42.6 32.1 42.5 48.3 45.8 33.6 44.6 48.9 46.3 35.2 46.6 49.5 46.9

77 23.3 32.2 37.2 35.1 24.8 34.5 39.8 37.5 26.3 36.7 42.4 40.0 27.0 37.9 42.2 39.7 27.7 39.2 42.0 39.4

74 19.0 28.0 32.9 30.8 19.7 29.4 34.8 32.5 20.4 30.9 36.6 34.2 20.3 31.3 35.6 33.1 20.3 31.7 34.6 32.0

105 °F

115 °F

125 °F

23.7 28.6 26.5

19.4 24.4 22.3

24.4 29.7 27.4

19.3 24.6 22.4

25.0 30.8 28.3

19.2 24.9 22.5

24.6 29.0 26.4

18.0 22.3 19.8

24.2 27.1 24.5

16.8 19.7 17.1

NET CAP.

MBH

48.4 44.7 41.0 36.9 50.5 46.6 42.8 38.5 52.6 48.6 44.6 40.1 52.9 48.8 44.9 40.3 53.2 49.1 45.1 40.5

7.56 7.37 7.33 7.27 7.69 7.50 7.46 7.40 7.82 7.63 7.59 7.53 8.05 7.85 7.81 7.75 8.28 8.08 8.03 7.97

TOTAL POWER

INPUT kW

86 34.6 43.3 41.0 36.9 38.4 45.9 42.8 38.5 42.2 48.6 44.6 40.1 45.2 48.8 44.9 40.3 48.3 49.1 45.1 40.5

83 30.3 39.1 41.0 36.9 33.3 42.8 42.8 38.5 36.3 46.5 44.6 40.1 38.6 47.8 44.9 40.3 40.8 49.1 45.1 40.5

80 26.1 34.8 38.6 34.8 28.3 37.7 41.9 37.8 30.5 40.7 45.2 40.7 31.9 42.6 45.1 40.6 33.4 44.6 45.1 40.5

77 21.8 30.5 34.3 30.5 23.2 32.7 36.8 32.7 24.7 34.9 39.3 34.9 25.3 36.0 38.5 34.0 25.9 37.1 37.7 33.1

74 17.5 26.2 30.0 26.3 18.2 27.6 31.8 27.7 18.8 29.0 33.5 29.1 18.7 29.4 31.9 27.4 18.5 29.7 30.2 25.6

22.0 25.8 22.0

17.7 21.5 17.7

22.6 26.7 22.6

17.5 21.7 17.6

23.2 27.7 23.2

17.4 21.8 17.4

22.7 25.2 20.7

16.1 18.6 14.1

22.2 22.8 18.2

14.8 15.3 10.7

NET CAP.

MBH

43.8 40.5 37.1 31.1 46.0 42.6 38.9 32.7 48.2 44.6 40.7 34.3 48.2 44.6 40.8 34.2 48.2 44.6 40.8 34.2

8.30 8.00 8.00 7.90 8.40 8.10 8.10 8.00 8.50 8.20 8.20 8.10 8.80 8.50 8.50 8.40 9.00 8.70 8.70 8.60

TOTAL POWER

INPUT kW

86 33.1 41.6 37.1 31.1 36.8 43.2 38.9 32.7 40.6 44.8 40.7 34.3 43.5 44.7 40.8 34.2 46.5 44.6 40.8 34.2

83 28.8 37.3 37.3 31.2 31.8 41.0 39.0 32.7 34.7 44.7 40.7 34.3 36.9 45.2 40.8 34.2 39.1 45.6 40.8 34.2

80 24.5 33.0 35.7 30.2 26.7 36.0 38.9 32.9 28.9 38.9 42.0 35.6 30.3 40.7 41.4 34.9 31.6 42.5 40.8 34.2

77 20.3 28.8 31.4 26.0 21.7 30.9 33.8 27.9 23.1 33.1 36.2 29.8 23.6 34.1 34.8 28.3 24.2 35.1 33.3 26.8

74 16.0 24.5 27.1 21.7 16.6 25.9 28.8 22.8 17.2 27.2 30.4 24.0 17.0 27.4 28.1 21.6 16.7 27.6 25.9 19.3

20.2 22.9 17.4

15.9 18.6 13.1

20.8 23.7 17.8

15.8 18.7 12.7

21.4 24.6 18.2

15.6 18.7 12.3

20.8 21.5 15.0

14.2 14.8 8.2

20.2 18.4 11.9

12.7 10.9 4.4

ALL SENSIBLE CAPACITY

1. These capacities are net capacities (the indoor fan heat is deducted).

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 8: SIDE SUPPLY AIR BLOWER PERFORMANCE

EXTERNAL STAIC PRESSURE - IWG

.50 .60 .70

.10

.20

.30

.40

.80

.90

1.00

1.10

MODEL # MTR

DNA

SPD

1238 504 1165 484 1075 463 984 443 894 422 751 390

030

036

MED 994 333 947 321 901 309 854 297 774 280

LOW

1465 712 1390 685 1315 657 1204 623 1093 588 982 554

MED 1432 650 1381 628 1330 605 1279 583 1210 556 1140 529 1071 502 977 477

LOW 1191 527 1149 510 1107 494 1065 477 1009 459 952 441

MED 1432 650 1381 628 1330 605 1279 583 1210 556 1140 529

LOW 1191 527 1149 510 1107 494 1065 477

1681 797 1610 768 1540 740 1465 712 1390 685 1315 657 1204 623 1093 588

042

1908 1023 1832 982 1737 938 1656 889 1348 789 1252 754

048,060

MED

LOW

1773 894 1726 869 1674 852 1613 832 1339 731

1672 841 1610 804 1542 773

1. Above data includes allowances for a dry evaporator coil, gas heat exchanger and no filters. For additional pressure drops, refer to

Table 10 and 11.

TABLE 9: BOTTOM SUPPLY AIR BLOWER PERFORMANCE

EXTERNAL STATIC PRESSURE - IWG

.10

.20

.30

.40

.50

.60

.70

.80

.90

1.00

1.10

MODEL # MTR

DNA

SPD

1115 454 1049 436

967 417 886 398 805 380 676 351

030

036

042

MED 895 300 853 289 811 278 769

267

697 252

LOW

1458 688 1377 663 1295 639 1147 600 999 561

MED 1482 628 1428 613 1374 599 1320 584 1242 556 1163 528 1085 500 961 474

LOW 1239 510 1184 496 1130 481 1075 467 998 448 922 428

HI 1687 763 1614 737 1540 712 1458 688 1377 663 1295 639 1147 600

MED 1482 628 1428 613 1374 599 1320 584 1242 556 1163 528 1085 500

LOW 1239 510 1184 496 1130 481 1075 467

1928 1032 1844 994 1636 923 1515 888 1441 849

048,060 MED

LOW

1805 837 1693 859 1580 819 1473 788

1725 850 1660 807 1557 776 1428 728

1. Above data includes allowances for a dry evaporator coil, gas heat exchanger and no filters. For additional pressure drops, refer

to Tables 10 a nd 11.

Johnson Controls Unitary Products

292443-XTG-D-0508

TABLE 10: ADDITIONAL STATIC PRESSURE RESISTANCE 2-1/2 - 3-1/2 TON (DNA030 - 042)

RESISTANCE, IWG

DESCRIPTION

CFM

500 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000

WET EVAPORATOR COIL

.01 .01 .01 .02 .03

.00 .00 .00 .01 .01

.01 .02 .04 .06 .08

.04

.01

.10

.05

.01

.13

.06

.02

.16

.07

.03

.17

.08

.04

.18

.09

.05

.19

.09

.06

.20

ECONOMIZER

FILTER FRAME KIT

1. Deduct these resistance values from the available external static pressure shown in Tables 8 a nd 9.

2. The pressure through the economizer is greater for 100% outdoor air then for 100% return air. If the resistance of the return air

duct system is less then 0.25 IWG, the unit will deliver less CFM during full economizer operation.

TABLE 11: ADDITIONAL STATIC PRESSURE RESISTANCE 4 - 5 TON (DNA048 - 060)

RESISTANCE, IWG

DESCRIPTION

CFM

500 600 700 800 900 1,000 1,100 1,200 1,300 1,400 1,500 1,600 1,700 1,800 1,900 2,000

WET EVAPORATOR COIL

.03

.02

.04

.02

.05

.03

.05

.06

.03

.06

.07

.04

.07

.04

.08

.04

.09

.05

.10

.09

.05

.11

ECONOMIZER

FILTER FRAME KIT

1. Deduct these resistance values from the available external static pressure shown in Table 8 and 9.

2. The pressure through the economizer is greater for 100% outdoor air then for 100% return air. If the resistance of the return air duct

system is less then 0.25 IWG, the unit will deliver less CFM during full economizer operation.

NOTE:

HEAT ANTICIPATOR

SHOULD BE SET AT 0.35

AMPS FOR ALL MODELS.

THERMOSTAT

UNIT TERMINAL STRIP

** = Minimum wire size of 18 AWG

wire should be used for all

field installed 24 volt wire.

24 VOLT

TRANSFORMER

PROGRAMMABLE

THERMOSTAT ONLY

FIGURE 3 - TYPICAL FIELD CONTROL WIRING DIAGRAM

Johnson Controls Unitary Products

292443-XTG-D-0508

CONTACTOR

FIELD-SUPPLIED

DISCONNECT

SINGLE

PHASE

POWER

SUPPLY

REFER TO ELECTRICAL

DATA TABLES TO SIZE

THE DISCONNECT

GROUND

LUG

CONTACTOR

FIELD-SUPPLIED

DISCONNECT

THREE

PHASE

POWER

SUPPLY

GROUND

LUG

REFER TO ELECTRICAL

DATA TABLES TO SIZE

THE DISCONNECT

FIGURE 4 - TYPICAL FIELD POWER WIRING DIAGRAM

TABLE 12: ELECTRICAL DATA

VOLTAGE

SUPPLY

AIR

BLOWER

MOTOR AMPACITY

FLA

MAX.

HACR

BREAKER POWER

MAX.

FUSE

COND.

FAN

MOTOR,

FLA

COMPRESSOR

MINIMUM

CIRCUIT

UNIT

LIMITATIONS

MODEL

DNA

POWER

SUPPLY

TRANSFORMER

SIZE (VA)

SIZE,

FACTOR

MIN.

MAX.

RLA

LRA

AMPS

030

036

042

048

060

208/230-1-60

208/230-3-60

460-3-60

187

414

187

414

187

414

187

414

253

504

253

504

253

504

253

504

14.7

17.3

10.9

5.8

1.1

0.6

1.1

0.6

1.3

0.7

1.3

0.7

2.2

3.5

1.8

3.5

1.8

21.7

26.2

18.2

9.6

0.96

208/230-1-60

208/230-3-60

460-3-60

15.4

11.5

5.8

23.9

9.7

208/230-1-60

208/230-3-60

460-3-60

24.4

14.1

7.1

140

105

38.8

25.9

13.1

44.4

29.5

15.4

3.5

208/230-1-60

208/230-3-60

460-3-60

28.9

15.5

8.9

175

125

66.5

3.5

1. Utilization range “A” in accordance with ARI Standard 110.

2. Dual element, time delay type.

Johnson Controls Unitary Products

292443-XTG-D-0508

VENT AIR OUTLET HOOD

BLOWER SERVICE

ACCESS COMPARTMENT

PANEL

CONDENSER COIL

GAS SUPPLY 1-1/4" DIA.

HOLE (1/2" NPTI

CONNECTION)

UNIT CONDENSATE

CONNECTION 3/4" NPTI

(TRAP RECOMMENDED)

2-3/8

HIGH VOLTAGE

CONN. 1-3/8" DIA.

KNOCKOUT

3-3/4

HIGH VOLTAGE

CONN. 7/8" DIA.

KNOCKOUT

REFRIGERANT

CONNECTIONS

2-1/2

COMBUSTION AIR

INLET LOUVERS

GAS SUPPLY 1-1/4" DIA.

KNOCKOUT (1/2" NPTI

CONNECTION)

FRONT

LOW VOLTAGE CONN.

1-3/8" DIA. KNOCKOUT

X 7/8" HOLE

5-3/8

2-5/8

1-1/2

GAS/ELECTRIC CONTROL

SERVICE ACCESS

COMPARTMENT PANEL

49-1/8

12-3/4

47-1/4

(OVERALL)

3-1/3

FIGURE 5 - UNIT DIMENSIONS - FRONT

TABLE 13: UNIT DIMENSIONS FRONT

1 2

TABLE 14: UNIT MINIMUM CLEARANCES

DIMENSION

UNIT SIZE

CLEARANCES

“A”

“B”

FRONT

REAR

36”

0”

030 thru 042

048 and 060

33-1/2

41-1/2

18-1/4

23-1/8

LEFT SIDE (Filter-Access)

RIGHT SIDE

24”

12”

0”

BELOW UNIT

36” (For Condenser Air Discharge

ABOVE UNIT

1. A 1” clearance must be provided between any combus-

tible material and the supply air ductwork.

2. The products of combustion must not be allowed to

accumulate within a confined space and recirculate.

3. Units may be installed on combustible floors made from

wood or class A, B, or C roof covering material.

4. Units must be installed outdoors. Overhanging struc-

tures or shrubs should not obstruct condenser air dis-

charge outlet.

Johnson Controls Unitary Products

292443-XTG-D-0508

(

)

FIGURE 6 - UNIT DIMENSIONS - FRONT & BOTTOM

FIGURE 7 - UNIT DIMENSIONS - BACK & BOTTOM

Johnson Controls Unitary Products

292443-XTG-D-0508

FIGURE 8 - TYPICAL SLAB ON GROUND INSTALLATION

FIGURE 9 - TYPICAL ROOF CURB INSTALLATION

Johnson Controls Unitary Products

292443-XTG-D-0508

FIGURE 10 - TYPICAL DUCT APPLICATIONS

TABLE 15: UNIT WEIGHTS AND CENTER OF GRAVITY

CORNER WEIGHTS

(location, lbs.)

SHIPPING

WEIGHT

(lbs.)

395

OPERATING

WEIGHT

(lbs.)

390

ROOF

CURB

(lbs.)

UNIT

SIZE

ECONOMIZER

(lbs.)

“A”

“B”

“C”

“D”

030

036

042

048

060

400

395

100

104

119

120

101

105

120

122

8” - 70

14” - 75

415

410

100

115

116

101

116

117

475

470

480

475

FIGURE 11 - UNIT CENTER OF GRAVITY

Johnson Controls Unitary Products

292443-XTG-D-0508

FIGURE 12 - ROOF CURB DIMENSIONS

1. 8” Roof curb also available

FIGURE 13 - ROOF CURB CROSS SECTION

Johnson Controls Unitary Products

292443-XTG-D-0508

FIGURE 14 - TYPICAL WIRING DIAGRAM DNA 030 THRU 060 (208/230-1-60 POWER SUPPLY)

Johnson Controls Unitary Products

292443-XTG-D-0508

FIGURE 15 - TYPICAL WIRING DIAGRAM DNA 036, 042, 048, 060 (208/230-3-60 POWER SUPPLY)

Johnson Controls Unitary Products

292443-XTG-D-0508

FIGURE 16 - TYPICAL WIRING DIAGRAM DNA 036, 042, 048, 060 (460-3-60 POWER SUPPLY)

Johnson Controls Unitary Products

292443-XTG-D-0508

6. If both LR and ASCT are present, wire 801/BL and 805/

BL are connected to ASCT-3. If only LR is present wire

801/BL and 805/BL are connected to M1 coil. If only

ASCT is present wire 202/Y is connected to ASCT-3. If

neither LR or ASCT are present, wire 202/Y is connected

to M1 coil as shown.

TYPICAL WIRING DIAGRAM NOTES

(SEE FIGURE 14 THRU 16)

1. All field wiring to be accomplished following city, local

and/or national codes in effect at time of installation of

this unit.

7. Shunt contact also used with crankcase heater.

(optional)

2. Caution: Label all wires prior to disconnection when ser-

vicing controls. Wiring errors can cause improper and

dangerous operation. If any of the wire as supplied with

this unit must be removed it must be replaced with type

105°C, 600V wire or equivalent clearly renumbered for

identification. Verify proper operation after servicing.

8. Select indoor blower speed to remain within the temper-

ature rise range on the nameplate in heating.

3. Motors inherently protected.

4. Factory wired for 230V. For 208V operation, move wire

107/PR to 208V. Tap on transformer T1.

Open all disconnects before servicing this unit.

5. See unit nameplate for maximum fuse size and/or circuit

breaker size and minimum circuit ampacity.

LEGEND

ALS

ASCT

AUXILARY LIMIT SWITCH

ANTI-SHORT CYCLE TIMER (OPTIONAL)

BLOWER RELAY

CIRCUIT BREAKER

CCH

COMPR

CRANK CASE HEATER (OPTIONAL)

COMPRESSOR

DRAFT MOTOR

FCB

GND

FAN CONTROL BOARD

GROUND

FREEZE STAT SWITCH (OPTIONAL)

HIGH PRESSURE SWITCH OPENS @ 380 PSIG

INDOOR FAN MOTOR

IDFAN

LOW PRESSURE SWITCH OPENS @ 7 PSIG

LIMIT SWITCH

LOCK OUT RELAY (OPTIONAL)

CONTACTOR, COMPR. AND OD FAN

OUTDOOR FAN MOTOR

ODFAN

PRESSURE SWITCH

RC1 / RC2

COMPRESSOR START & OUTDOOR FAN RUN CAPACITOR

ROLLOUT SWITCH

TB4

TERMINAL BLOCK

TRANSFORMER, 24V, 230V

FIGURE 17 - TYPICAL WIRING DIAGRAM LEGEND

nized steel tubular heat exchangers and spark to pilot igni-

tion. They are available in natural gas with field conversion to

propane.

MECHANICAL SPECIFICATIONS

GENERAL

DESCRIPTION

Units shall be manufactured by York International Unitary

Products Group in an ISO 9001 certified facility. YORK’s

Affinity™ package units are designed to handle applications

ranging from residential to light commercial and any in

between. The Affinity™ is a unit that gives you the flexibility

and choices you need in today’s market. These packaged

cooling/heating air conditioners are designed for outdoor

installation. Only utility and duct connections are required at

the point of installation. The gas fired heaters have alumi-

Units shall be factory-assembled, single packaged, Electric

Cooling/Gas Heating units, designed for outdoor mounted

installation. For EER ratings, refer to technical literature.

They shall have built in, equal size, field convertible duct

connections for down discharge supply/return or horizontal

discharge supply/return. The units shall be factory wired,

piped, charged with R-22 refrigerant and factory tested prior

Johnson Controls Unitary Products

292443-XTG-D-0508

to shipment. All unit wiring shall be both numbered and

color coded. All units shall be manufactured in a facility cer-

tified to ISO 9001 standards, and the cooling performance

shall be rated in accordance with DOE and ARI test proce-

dures. The heating performance shall be rated to DOE and

GAMA test procedures. Units shall be CSA listed and classi-

fied to ANSI Z21.47/CAN/CSA 2.3 standards and UL 1995/

CAN/CSA No. 236-M90 conditions.

rosion resistant steel spider bracket and shall be statically

balanced for smooth operation. The outdoor fan motor shall

be totally enclosed with permanently lubricated bearings and

internally protected against overload conditions.

REFRIGERANT COMPONENTS

Compressors:

a. Shall be fully hermetic type, direct drive, internally

protected with internal high-pressure relief and over

temperature protection. The hermetic motor shall be

suction gas cooled and have a voltage range of + or

- 10% of the unit nameplate voltage.

UNIT CABINET

Unit cabinet shall be constructed of galvanized steel, with

exterior surfaces coated with a non-chalking, powdered paint

finish, certified at 1000 hours salt spray test per ASTMB117

standards. The unit top shall be a single piece “Water Shed”

design, with drip edges and no-seam corners to provide opti-

mum water integrity. Unit shall have a rigidly mounted con-

denser coil guard to provide protection from objects and

personnel after installation. Indoor blower section shall be

insulated with up to 3/4” thick, aluminum, foil faced insulation,

fastened to prevent insulation from entering the air stream.

Cabinet panels shall be “large” size, easily removable for ser-

vicing and maintenance, with built-in lift handles. Unit shall be

built on a formed, “Super-Structure” design base pan, with

embossments at critical points to add strength, rigidity and

aid in minimizing sound. Full perimeter base rails shall be

provided to assure reliable transit of equipment, overhead rig-

ging, for truck access and proper sealing on roof curb appli-

cations. Base rails shall be removable, when required, to

lower unit height. Filters shall be furnished and be accessible

through a removable access door, sealed airtight. Units verti-

cal discharge and return duct configuration shall be designed

to fit between standard 24” O.C. beams without modification

to building structure, duct work and base unit. Condensate

pan shall be internally sloped and conform to ASHRAE 62-89

self-draining standards, with 3/4” NPTI copper, ridged mount

connection.

b. Shall have internal isolation and sound muffling to

minimize vibration and noise, and be externally iso-

lated on a dedicated, independent mounting.

Coils:

a. Evaporator and condenser coils shall have alumi-

num plate fins mechanically bonded to seamless

internally enhanced copper tubes with all joints

brazed.

b. Evaporator coil shall be of the direct expansion,

blow through design, while condenser coil shall be

draw through design.

Refrigerant Circuit and Refrigerant Safety Components:

a. Shall include independent fixed-orifice expansion

devices.

b. Shall include filter/strainer to eliminate any foreign

matter.

UNIT OPERATING CHARACTERISTICS

Unit shall be capable of starting and running at 125º F out-

door temperature, exceeding maximum load criteria ARI

Standard 210/240. The compressor, with standard controls,

shall be capable of operation down to 45º F outdoor tempera-

ture. Accessory low ambient kit shall be available for opera-

tion to 0º F.

INDOOR (EVAPORATOR) FAN ASSEMBLY

Fan shall be direct drive, multi-speed design. Job site

selected (BHP) brake horsepower shall not exceed the

motors nameplate horsepower rating. Fan wheel shall be

double-inlet type with forward-curved blades, dynamically

balanced to operate smoothly throughout the entire range of

operation. Airflow design shall be constant air volume. Bear-

ings shall be sealed and permanently lubricated for longer life

and no maintenance. Fan assembly shall be “Slip Track”

(slide-out) design for easy removal and cleaning.

ELECTRICAL REQUIREMENTS

All unit power wiring shall enter unit cabinet at a single factory

provided location and be capable of side or bottom entry, to

minimize roof penetrations and avoid unit field modifications.

Separate side and bottom openings shall be provided for the

control wiring.

OUTDOOR (CONDENSER) FAN ASSEMBLY

The outdoor fan shall be of the direct-driven propeller type,

discharge air vertically, have aluminum blades riveted to cor-

Johnson Controls Unitary Products

292443-XTG-D-0508

Johnson Controls Unitary Products

292443-XTG-D-0508

Johnson Controls Unitary Products

Subject to change without notice. Printed in U.S.A.

292443-XTG-D-0508

Supersedes: 292443-XTG-C-0108

Johnson Controls Unitary Products

5005 York Drive

Norman, OK 73069

Xerox All In One Printer 6100 User Manual
Xantrex Technology Dr1524e User Manual
Vicks Air Cleaner V9071 User Manual
Toshiba Carrier Rav Sp300at2 Ul User Manual
Samsung Aw22f User Manual
Panasonic Dp 3530 User Manual
Mega Chef Pressure Cooker User Manual
CRAFTSMAN 536.881400 User Manual
BROTHER FAX 775SI 02 User Manual
BLACK DECKER BDFC240 User Manual