Criteria
be provided to
Supporting Features
Remarks and explanations
automatically reset the
volume to the default level
after every use.
(g) Color coding shall not be
used as the only means of
conveying information,
indicating an action,
prompting a response, or
distinguishing a visual
element.
Color coding and additional means of unique identification
(e.g., text and symbols) are used.
Supports
(h) When a product permits
a user to adjust color and
contrast settings, a range of
color selections capable of Not applicable
producing a variety of
There are no color contrast settings.
contrast levels shall be
provided.
(i) Products shall be
designed to avoid causing
the screen to flicker with a Supports
frequency greater than 2 Hz
and lower than 55 Hz.
The flash rate of flashing elements does not fall between 2 Hz
and 55 Hz.
(j) (1) Products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls shall
comply with the following:
The position of any
operable control shall be
determined with respect to
All position measurements were performed against the
specified vertical plane. The product is light enough and can
be placed on an appropriate desk or table for use.
a vertical plane, which is 48
Supports
inches in length, centered
on the operable control,
and at the maximum
protrusion of the product
within the 48 inch length on
products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls.
(j)(2) Products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls shall
comply with the following:
Supports
All operable controls are within specification.
All operable controls are within specification.
Where any operable control
is 10 inches or less behind
the reference plane, the
height shall be 54 inches
maximum and 15 inches
minimum above the floor.
(j)(3) Products which are
Supports
freestanding, non-portable,
7 of 11
Last Revision: 05/21/09