By providing your product and purchase information, we can confirm the date of purchase
to secure your warranty. This confirmation serves as security in the event that your original
proof of purchase is lost, or in case your unit needs any servicing in the future.
Your model number, serial number, and other information will be kept in our files.
Please complete and return this registration within 30 days from purchase in order to receive
our 5 Year Limited Warranty.
03
04
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
Always unplug the RabbitAir
™
MinusA2 Air Purifier before
cleaning it.
General Safety Instructions
Do not place heavy objects on top
of power cord.
Installation Guidelines
™
To reduce the risk of electric shock, the RabbitAir MinusA2 Air Purifier
™
The RabbitAir MinusA2 Air
has a polarized plug. There is only one way for the plug to fit into a
polarized outlet. If the plug does not fit into the outlet, reverse the plug. If
it still does not fit, contact qualified personnel to install the proper outlet.
Do not alter the plug in any way.
Purifier is not intended for use in
bathrooms, laundry areas and
other damp indoor environments.
Keep the Air Purifier away from
water at all times. Never place the
unit anywhere near bathtubs or
sinks.
Always keep the plug clean. Do NOT use Benzene or gasoline to clean
the plug.
Do not place the RabbitAir
™
Do not use the power cord to lift,
pull, carry or drag the RabbitAir
MinusA2 Air Purifier on top of
ANY electrical appliances.
™
MinusA2 Air Purifier. Avoid
pulling the power cord against or
around sharp corners or edges.
05
06
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
Place the unit on a level area.
Do not apply force to the unit.
Installation Guidelines
Do not use the unit on its side.
Do not install the RabbitAir
™
MinusA2 Air Purifier in
places that tend to produce oily
residue such as kitchens.
Cautions Concerning the Operation of RabbitAir
™
MinusA2 Air Purifier.
™
Do not expose the RabbitAir
Unplug the RabbitAir MinusA2
™
MinusA2 Air Purifier to direct
Air Purifier immediately if it makes
a strange noise or produces an
odd smell.
sunlight. Avoid leaving the
remote control in direct sunlight.
Heat may interfere with remote
control signals.
Contact Rabbit Air for assistance.
Leave at least 2 inches of space
between the wall and the
Do not block the intake and air
outlet.
™
RabbitAir MinusA2 Air Purifier.
Leave at least 2 feet of space
between the ceiling and the
Do not use the unit on or around hot
objects such stoves and heating vents.
™
RabbitAir MinusA2 Air Purifier.
Do not use the unit where it may
come into contact with steam.
07
08
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
Do not operate the unit without the filters. Do not wash & reuse any
filters except for the electrostatic pre-filter. When transporting the unit,
always hold the handle on the back of the unit.
Cautions Concerning the Operation of RabbitAir
MinusA2 Air Purifier.
™
™
When the RabbitAir MinusA2 Air
Purifier is turned on, do not put
anything in the opening of the unit.
Keep your body parts, hair, jewelry,
or any parts of your clothing away
from the opening.
™
Do not use the RabbitAir MinusA2 Air
Purifier near fireplaces or in areas where
flammable or combustible products or
vapors may be present.
Please observe extreme caution when
™
Do not use detergent or soap to clean
the unit.
the RabbitAir MinusA2 Air Purifier is
used by or near children.
Do not insert fingers or foreign objects
into the particle sensor.
09
10
FEATURES
ꢂ Wall-Mountable Design (Optional)
ꢀ Excellent Air Purification
™
The RabbitAir MinusA2 Air Purifier is wall-
6-Stages of air purification. RabbitAir
mountable.
™
MinusA2 Air Purifier is effective against
allergens, mold, bacteria & viruses.
ꢁ Pollen Mode
Pollen Mode is designed for optimal indoor air
circulation and the rapid removal of pollutants.
Specially designed for people who are
sensitive to allergy triggers such as pollen,
dust and other allergens in the air. Particularly
effective when high levels of pollen are
present, such as in the springtime.
ꢇ Strong Deodorization
Charcoal based Activated Carbon Filters
capture airborne chemicals, VOCs (Volatile
Organic Compounds) and odors. VOCs are
often generated by off-gassing from carpets,
composite wood, furniture and other materials
in the home.
ꢃ Silent Mode
A light sensor on the unit detects when your
house is dark and automatically switches into
Silent (Sleep) Mode.
ꢈ Negative Ion Generation
™
RabbitAir MinusA2 Air Purifier produces
millions of healthy "negative ions," present in
natural environments such as forests and
mountains, to improve and freshen the air you
breathe.
ꢄ Safety Design
For safety purposes, the unit automatically
switches off when the font panel is removed.
ꢉ Auto Mode Operation
In Auto Mode, the speed of the fan
automatically changes to a higher speed when
the particle sensor detects impurities in the air.
ꢅ Mood Light
Mood Light helps to normalize blood
pressure, pulse, and faciliate deep
breathing, which puts a person in a state
of long-lasting calm & relaxation.
ꢊ Remote Control
ꢆ Quiet Mode
Using this sleek remote control, you can
conveniently manage the air purifier from
wherever you are in the house.
To reduce noise level, the fan functions at its
lowest speed in Quiet Mode.
11
12
PART NAMES
Front View of Air Purifier
Back View of Air Purifier
▶
▶
Handle
▶
Mood Light
Power cord
Unit Hanger ▶
Ventilation ▶
Grille
Control Panel/
Display Panel
▶
Remote control
▶
▶
Particle Sensor
Light Sensor
▶
▶
Power
Speed
Mode
▶
▶
Mood Light
▶
Air Quality Indicator
Battery (AAA size)
13
14
OPERATION PART
INDICATION PART
POLLEN
QUIET
Auto Mode indicator
Fan Speed Indicator
Indicates the fan speed of the Air
Purifier.
The lowest speed is Silent.
The highest speed is Turbo.
When Auto Mode is selected, the
fan speed of the air purifier changes
automatically depending on the
amount of impurities in the air as
detected by the particle sensors and
the mood light turns blue.
Power
Press and hold the power button for 2
seconds to turn off the unit.
Speed
Pollen Mode Indicator
Brightness Indicator
POLLEN
QUIET
There are five speeds. Operation speed
changes in the following order as you press
the speed button.
When Pollen Mode is selected,
the fan speed of the air purifier
changes fan speeds (silent>low>
medium>high) every 70 seconds,
while the mood light changes in
the following pattern blue>
purple>light purple>pink every
second.
When the Brightness Indicator and the
Sleep Mode are both on, the Mood
Light turns off automatically.
When the Brightness Indicator is off
and the Sleep Mode is on, the Mood
Light shines half as bright.
Silent > Low > Medium > High > Turbo
Mode
Sleep Mode Indicator
There are three operation modes. The mode
changes in the following order as you press
the mode button: Auto >Quiet >Pollen
This indicates that the unit is
operating in the silent mode.
Quiet Mode Indicator
When Quiet Mode is selected, the
fan speed of the air purifier
automatically switches to the
lowest setting and the Mood Light
turns purple.
Air Quality Indicator
Mood Light
This indicates the current level of air
quality in the room. The colors
representing the air quality level are
blue>purple>light purple>red.
Blue represents good air quality,
while red represents poor air quality.
The color of the Mood Light on the front panel
changes according to the mode of operation.
Mood Light
The Mood Light has four colors: blue,
purple, light purple and pink.
15
16
NAMES OF INTERNAL FILTERS
▶
▶
●
●
Negative Ions
The air purifier produces millions of healthy "negative ions" to improve
the air you breathe and freshen your indoor environment through the
use of an ion generator inside of the unit.
Filter Case
The filter case is designed to hold the Nano-Silver Pre-Filter, Medium
Filter, BioGSTM HEPA Filter, Customized Filter and Charcoal-based
Activated Carbon Filter.
▶
▶
▶
●
●
●
Nano-Silver Pre-Filter
The Nano-Silver Pre-Filter destroys germs and collects pet hair, large
allergens and dust.
Anti-Bacterial Medium Filter
The anti-bacterial Medium Filter traps particles, mold, and bacteria
larger than 1㎛. It also extends the lifespan of the HEPA Filter.
BioGS™ HEPA Filter
“Next Generation” HEPA Filter made from bio-engineered fiber traps
and destroys the allergens such as pet dander, dust mite and pollen
which accumulate on the filter.
▶
▶
●
●
Customized Filters
There are three customized filters designed for specific needs.
·Toxin Absorber - eliminates toxic formaldehyde & offgassing from
materials such as new furniture, carpet & paint.
·Germ Defense - protects against germs, mold, and bacteria such
as Legionella.
·Pet Allergy- traps pet dander, destroys influenza virus & bacteria.
Charcoal Based Activated Carbon Filter
The Charcoal-based Activated Carbon Filter efficiently removes
VOC’s, common household odors and chemicals.
17
18
PREPARATIONS
OPERATION
™
RabbitAir MinusA2 Air Purifier is designed for residential use only.
This unit is designed for residential use only.
To maintain the quality of the filters, they are packaged in plastic.
Please remove the filters from the plastic bags before using the unit.
Lock the filter case in place on the unit.
Auto Mode Operation
Attach the Pre - Filter to the filter case by aligning the filter with the hooks of the case.
The non-woven fabric of the Customized Filter should face the front of the unit.
Press the power button, the auto mode would turn on and mood light turns blue.
❶
❷
❸
Plug the unit into a 110/120V outlet.
❶
To remove the filter case, pull the
bottom of the front panel and lift.
Then take out the filter case.
ꢀ
Press the power button, the air
purifier is now in auto mode.
❷
Remove the packing materials from
the filters and reload the filters in the
following order:
Nano-Silver Pre-Filter, Medium Filter,
™
BioGS HEPA filter, Customized Filter
and Charcoal
AC Filter.
ꢀ
ꢀ
The Air Quality Indicator changes
based on the amount of impurities in
the air and the fan speed adjusts
accordingly.
❸
To place filter case back into the unit, lock
the bottom of the filter case into the unit
first and then the top. Finally, place the
front panel
back to the
unit with the
top first.
19
20
OPERATION
Manual Operation
Mode Operation
To operate the unit manually, press the speed button after turning on the unit.
After turning on the unit, press the mode button
❶
❷
❸
❹
Plug the unit into a 110/120V outlet.
❶
❷
❸
Plug the unit into a 110/120V outlet.
Press the power button, the air purifier
should be in auto mode the first time
it’s plugged in.
Press the power button to turn on
the unit. The unit stays in the same
mode it was in the last time the unit
was turned off.
Press the speed button to change the
speed. The speed will not change until
you adjust it.
ꢀ
ꢀ
The 3 modes of operation are:
Pollen, Quiet and Auto.
Press the button to select the speed.
There are five speeds to choose from,
Silent, Low, Medium, High and Turbo.
ꢀ
21
22
OPERATION
How Does Sleep Mode Work?
How Do I Change the Particle Sensitivity Level?
When the Silent Mode is turned on, the fan speed of the Air Purifier
automatically changes to lowest, which minimizes the energy
consumption and noise level.
You may need to adjust the sensitivity level if the air quality indicator is BLUE
(good air quality) when the air in the room does not seem good or RED (bad air
quality) even after 2 hours of operation.
Light sensor detects the brightness of
●
●
●
Press and hold both the speed and
mode button for 3 seconds.
the surrounding room. Unit automatically
switches to Silent Mode three minutes
after darkness is detected.
The Air Quality Indicator and Auto Mode
Indicator will blink.
●In order to operate in Silent Mode, the
Unit must be switched to Auto or Quiet
Mode.
●Press and hold the speed button to
choose the sensitivity level.
Pollen : Low
Quiet : Standard (Default)
Auto : High
ꢀ
●
Sleep Mode Indicator turns on in Silent
Mode, which automatically switches off
Mood Light and Air Quality Indicator.
●
Press and hold the speed and mode
button for 3 seconds to save the
sensitivity level. If no action is taken for
10 seconds, the sensitivity level saves
itself automatically.
23
24
OPERATION
CLEANING and MAINTENANCE
Always unplug the unit before cleaning.
Mood Light
Cleaning the Particle Sensor
outlet air inlet
Recommend cleaning particle sensor every
3 to 6 month.
●
Mood light not only changes colors, but it also indicates the current
operation mode.
Clean the air inlet and outlet using a vacuum
cleaner or soft brush.
●
●
●
The mood light turns on automatically
when the unit is turned on. Press the
mood light button to turn on/off the
mood light.
dust outlet
Open the particle sensor cover on the right side of
the unit (when facing the
unit). Use a wet cotton
swab to clean and dry
the lens, dust inlet and
●
ꢀ
dust outlet.
Press and hold the Mood Light button for 2 seconds, the Brightness Indicator
turns on and the Mood Light turns off.
dust inlet
Cleaning the Air Intake and Outlet
ꢀ
ꢀ
ꢀ
●
Clean the air intake and outlet with
a soft brush.
Press and hold the
Mood Light for 2
seconds.
The Brightness
Indicator goes on.
Sleep Mode turns
on.
The Mood Light
automatically turns off.
Be careful not to drop the brush into
the unit.
→ Press the mood light button for 2 seconds, the Indicator turns off and the Silent Mode resumes.
Cleaning the Negative Ion Generator
ꢀ
ꢀ
ꢀ
●Use a dry cotton swab to remove
dust on the plate.
Press and hold the
Mood Light for 2
seconds.
The brightness of the
Mood Light reduces
by half.
The Brightness
Indicator turns off.
Sleep Mode
operation
Be careful not to drop the cotton swab
into the unit.
Cleaning the Front Panel
●Remove the front panel from the
unit and use a dry cloth or soft
brush to dust it off.
●
The color of the Mood Light changes according to
different mode.
Auto: Blue
Quiet : Purple
Pollen : Blue-Purple-Light Purple-Pink.
Use a wet cloth if necessary but do
not use a polisher.
※ The mood light darkens when the Silent Mode turns on.
25
26
CLEANING and MAINTENANCE
FILTER REPLACEMENT
Always unplug the unit before cleaning/replacing the filters.
Cleaning the Lens on the Back of the Front Panel
Depending on the amount of pollutants in your indoor environment, the frequency
of replacing the filter varies.
●Remove the front panel from the unit and use
a dry cloth, soft brush, or cotton swab to dust
off the mood light on the back of the panel.
When placing the filter case back into unit, make sure the bottom of the case goes
into the unit first, and then follows the top.
Use a wet cloth if necessary but do not use a
polisher.
❹Dry the filter completely before attaching
it to the filter case. Load the case onto
the unit again.
Cleaning the Unit
Attach the pre filter to
the filter case by aligning
ꢀ
the filter with the hooks
of the case.
●
Use a dry and soft cloth to clean the unit.
Use a wet cloth if necessary but do not use
a polisher.
Replacing the Medium Filter (Every 12 Months)
❶
Remove the filter from the filter case.
Cleaning the Nano-Silver Pre-Filter
Do NOT discard the filter holder.
❶
❷
❸
Pull the bottom of the front panel to
remove it from the unit.
ꢀ
❷To replace the medium filter, remove the
new filter from the plastic bag, attach it to
the filter holder,and
Pull the filter out as shown on the
picture at the right.
place it back into
the filter case.
ꢀ
™
Replacing the BioGS HEPA Filter (Every 12 Months)
❶
Remove the front panel and then the
BioGS HEPA filter.
Run a vacuum cleaner with a nozzle or
brush attachment on low power
setting along the Pre-Filter to pick up
the dust and particles.
™
ꢀ
27
28
FILTER REPLACEMENT
❷
❷
Take out the new HEPA Filter from the
plastic bag and put it into the filter case.
Remove the new Charcoal-based
Activated Carbon Filter from the plastic
bag, and place the filter back into the filter
case.
ꢀ
ꢀ
Note: Place the filters in the following order
Pre-Filter (top), Medium, HEPA, Customized, and AC Filter.
Replacing the Customized Filter (Every 12 Months)
❶
Remove the new Customized Filter from
the filter case. Do not discard the filter
holder. Discard the
Cleaning and replacement schedule
old Customized
Filter and do not
store for re-use.
Filters
Nano-Silver Pre-Filter
Medium
Replacement
Permanent/Washable
Every 12 Months
Every 12 Months
Every 12 Months
Every 12 Months
Cleaning
Every Month
Not required
Not required
Not required
Not required
ꢀ
ꢀ
TM
BioGS HEPA
❷
Remove the Customized Filter from the
plastic bag. Attach the new Filter onto the
filter holder and place it back into the filter
case.
Customized Filter
Charcoal based Activated Carbon
※ Based on 24/7 operation.
Identify front side of custom Filter
Toxin Absorber Germ Defense
Pet Allergy
Purple
Filter
Front(Fabric)
Back
Purple
Black
Purple
Yellow
Color
Replacing the Charcoal based Activated Carbon
Filter (Every 12 Months)
Orange
❶
Remove the old Charcoal-based Activated
Carbon Filter from the filter case. Discard the
old AC Filter and do
not store for re-use.
ꢀ
29
30
TROUBLESHOOTING
▶
Wall-Mountable (Optional)
Use the optional wall-mount kit to install the air purifier.
Before calling for repair or replacement, or technical support, please review
the list below. The problem may not be due to unit malfunction. If your
problem is still unresolved after reviewing this guide, please call Rabbit Air
Technical Support Team.
<Installation>
Place the unit at some certain distance away from the
ceiling and the other walls as shown on the picture at
the right.
▶Be careful not to drop the front panel or filter case when
Symptom
replacing the filters.
Solution
Check
▶Do not pull on the power cord.
•
•
•
Is the unit plugged in?
Plug the unit into a
110/120V outlet.
Drive in the screws of the hanger very tightly so that the unit will not fall off.
The unit does
not operate.
Are the lights on display
panel off?
Press the power and
mode button.
Is the electricity cut off?
Operate the unit after
electricity is resumed.
Disclaimer for installing wall mounted object
•
•
Has the auto mode been
selected?
You can't select the
speed when the auto
mode is set.
Do not attempt to install this product if you do not understand the instructions. Contact a qualified
contractor to install the mounting brackets and call 1-888-866-8862 if you have any questions. You
risk the possibility of damaging the Air Purifier, damaging other property and personal injury if the
mounting brackets are not installed properly. Check to make sure there are no missing or defective
parts. Do not attempt to assemble the mounting brackets if there are missing or defective parts.
Contact Rabbit Air and replacement parts will be shipped to you immediately. Rabbit Air is not liable
for damage or injury caused by incorrect mounting, incorrect assembly or incorrect usage.
Speed will not
change.
You can’t select the
speed when the silent
mode is on.
Is the room dark?
•
•
•
Air Quality
Indicator does
not change
when cigarette
smoke is in the
air or when the
air is highly
polluted.
Is the Particle Sensor clean?
Clean the lens.
(Page 24)
ㆍAfter installing the wall mount, make sure it is firmly in place before putting the air purifier on it.
ㆍThe biggest concern mounting on the wall is wiring in the wall. It’s hard to be sure, but be careful
not to drill or screw into any wiring.
Does it continually indicate
'Not Clean'?
Lower the sensitivity.
(Page 22)
Correct installation is extremely essential, and falls outside the scope of responsibility of Rabbit Air.
The fastening material provided is exclusively intended for installation on walls made of solid wood,
bricks, concrete or solidwood columns with a maximum of 3 mm wall finishing. For walls made of
other materials, for example hollow bricks, please consult your installer and/or specialist supplier.
Maximum weight of air purifier SPA-780A: 9.1 kg/20lbs.
Does it continually indicate
'Very Clean'?
Raise the sensitivity.
(Page 22)
•
Have you cleaned or replaced
the filters yet?
Check the cleaning and
replacement schedule.
Speed is
too slow.
31
32
SPA-780A
LIMITED WARRANTY
Rabbit Air warrants that your
Air Purifier will be free from defects in material or workmanship for a
period of Five (5) years from the date of purchase. To activate the warranty, please complete and return
your warranty registration within 30 days of purchase of your Air Purifier to Rabbit Air. In order to ensure
Symptom
Check
Solution
unit performance, the filters should be replaced with original
replacement filters as recommended
in this manual (the 'Limited Warranty'). Otherwise the standard warranty time in your country applies.
There's odor
from the air
outlet.
•
Have you cleaned or replaced
the filters yet?
Check the cleaning and
replacement schedule.
Within the first 30 days of purchase, Rabbit Air will replace the defective unit at no additional cost and
reimburse any shipping charges. After 30 days, Rabbit Air's obligation and liability under this Limited
Warranty is limited to repairing or replacing (at its sole discretion) the defective unit. The Limited
Warranty does not cover replacement filters.
Air Quality
Indicator
blinks.
•
•
Call Rabbit Air Technical Support Team.
In the event of a malfunction or failure of your Rabbit Air
Air Purifier, please contact Rabbit Air to
obtain a return authorization number and the address of the service center. The return authorization
number must be clearly written on the outside of the shipping box or the shipment may be refused.
Unplug the unit and call Rabbit Air Technical Support Team.
Other problems
Your Limited Warranty remains in effect only if your
Air Purifier:
1. Is operated in accordance with the instruction provided.
2. Is connected to a proper power supply (see voltage label on machine).
3. Three is no evidence of tampering, mishandling, neglect, accidental damage, modification,
and/or repair done to the
Air Purifier by anyone other than authorized
service personnel.
4. Your warranty registration has been completed and returned to Rabbit Air.
LIMITED AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitation of incidental or consequential damages, or limitations on how long an implied warranty
lasts, so the above exclusions or limitations may not apply to you.
The Energy Star Label and disclaimer:
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
If a problem with the product develops during the warranty period, we will repair or replace it
without charge to you. A shipping and processing fee may apply. To obtain service under
warranty, please contact Rabbit Air at 1-888-866-8862 or by email at [email protected]
The energy efficiency of this ENERGY STAR qualified model is measured based on a
ratio between the model’s CADR for Dust and the electrical energy it consumes, or
CADR/Watt.
|