ꢀInstallation
ꢀUsage & Maintenance
ꢀTroubleshooting
Table of Contents
INTRODUCTION....................................................................................................1
How to Use This Guide............................................................................................... 1
CHAPTER I. INSTALLING THE SCANNER....................................................................5
Software Installation Requirements............................................................................ 5
Hardware Requirements............................................................................................. 5
Installing and Setting up the Scanner......................................................................... 6
Step 1. Connecting the Scanner to Your Computer............................................................. 6
Step 3. Testing the Scanner................................................................................................. 8
Using the Scanner Buttons....................................................................................... 12
Calibrating the Scanner...................................................................................................... 18
Cleaning the Scanner......................................................................................................... 19
APPENDIX A: TROUBLESHOOTING........................................................................ 21
Introduction
Welcome to the world of Plustek scanners – the ultimate in computer imaging.
Your new scanner will improve the professionalism of your day-to-day computing tasks
by allowing you to input images and electronic text into your computer system.
Like all of our products, your new scanner is thoroughly tested and backed by our
reputation for unsurpassed dependability and customer satisfaction.
Please remember to register your scanner. Registration may be completed in one
of three ways:
1) By registering online via Plustek’s Web Site;
2) By printing out and faxing a completed registration card to Plustek’s customer
service center;
3) By printing out and mailing the registration card directly to the Plustek office
nearest you.
See the last page of this user’s guide for a complete list of Plustek offices
worldwide.
As a registered customer, you will receive customer support, new product
information and software upgrades.
Thank you for choosing us as your scanner supplier. We hope you will continue to
turn to us for additional quality products as your computing needs and interests grow.
How to Use This Guide
This User’s Guide provides instructions and illustrations on how to install and
operate your scanner. This guide assumes the user is familiar with Microsoft Windows
XP, 98, Me and 2000 Professional. If this is not the case, we suggest you learn more
about Microsoft Windows by referring to your Microsoft Windows manual before using
your scanner.
computer requirements to use this scanner. Before you start installing your scanner,
check the box contents to make sure all parts are included. If any items are damaged
or missing, please contact the vendor where you purchased your scanner or our
customer service directly.
Chapter I describes how to install scanner’s software and connect the scanner to
your computer. Note: The scanner connects to your computer through the Universal
Serial Bus (USB). If your computer does not support USB technology, you will need to
purchase a USB interface card to add USB capabilities to your computer, or buy and
install USB connectors if your motherboard has USB capabilities. This guide assumes
that your computer is USB-ready and has a free USB port.
1
Chapter II describes how to use, maintain and clean your scanner.
Appendix A contains technical support information that can help you solve simple
problems. Before calling for help, please read through Appendix A: Troubleshooting.
Appendix B contains the Specifications of the scanner you purchased.
Appendix C contains our limited warranty agreement and FCC statement
concerning the product.
Conventions of This Guide
Bold — Important note or first use of an important term in a chapter.
[XXX] — Represents commands or contents on your computer screen.
A Note about Icons
This guide uses the following icons to point out information that deserves special
attention.
Danger: A procedure that must be followed carefully to
prevent injury, or accidents.
Danger
Caution: Information that, if not followed, may result in
data loss or damage to the product.
Caution
Pay Special Attention: Instructions that are important to
remember and may prevent mistakes.
Attention
System Requirements1
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Windows/Intel Compatible Personal Computer
Pentium CPU or above
CD-ROM Drive
64 MB RAM (128 MB Recommended)
250 MB Free Hard Disk Space (300 MB Recommended)
USB Port
Microsoft™ Windows XP, 98, Me, and 2000 Professional
NOTE: Windows NT 4.0 does not support Universal Serial Bus (USB) connectivity.
1 Higher requirements might be needed when scanning or editing a large quantity of image data.
The system requirements here are only a guideline, as in general the better the computer
(motherboard, processor, hard disk, RAM, video graphic card), the better the results.
2
ꢁ
Video card that supports 16-bit color or greater
Box Contents2
1. Scanner
2. USB Cable
3. Quick Guide (Scanner)
4. Setup / Application CD-ROM
5. Calibration Sheet
6. Cleaning paper
7. Travel Pouch
The Scanner’s Features
2 Save the box and packing materials in case you need to transport this scanner in the future.
3
1. USB port: It connects the scanner to a USB port on your computer by the included
USB cable.
2. Page feed slot: Feed the document into the scanner from this direction. You can
feel the document being grabbed by the scanner.
3. Alignment arrow: Always align the edges of your documents to this arrow sign.
4. SCAN button: Press this button to start scanning and save the images into your
computer.
5. BCR button: Press this button to start scanning for business card reading within
Cardiris program.
6. LED indicator: It indicates the scanner’s current status.
Product Information
Please fill in the following information for your own records. You will need it when
you contact your dealer or our service center in the future.
Serial Number:
ꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂꢂ
(Located at the bottom of the scanner)
Date of Purchase:
ꢂꢂ- ꢂꢂ- ꢂꢂꢂꢂ
4
Chapter I. Installing the Scanner
Before installing your scanner, please verify that you have all of the proper
components. A list of the package contents is provided in the Box Contents section of
this guide.
Software Installation Requirements
Your scanner comes with the image-editing software, BCR software, the
scanner’s driver, and the Smart Touch software. All of these software applications use
approximately 250 megabytes of hard disk space after they are installed into your
computer. To ensure ample room for the installation, as well as for scanning and
saving images, a minimum of 300 megabytes of hard disk space is recommended.
The USB scanner can only operate under the Microsoft Windows 98, Me, 2000
Professional or XP operating system.
Hardware Requirements
This scanner connects to your computer through the Universal Serial Bus (USB)
which supports hot Plug and Play. To determine whether your computer is USB-
capable, you must check the rear of your PC to locate a USB jack that looks the same
as the one pictured below. Note that on some computers, the USB port at the rear of
the computer may be occupied and additional ports may be found on the monitor or
keyboard. If you are having trouble in locating the USB port on your computer, please
refer to the hardware manual that came with your computer.
Upon examination, you should find one or two rectangular USB ports, which
usually appear as shown below.
USB Connector(s)
If you don’t find such USB ports on your computer, then you need to purchase a
certified USB interface card to add USB capabilities to your computer.
5
Installing and Setting up the Scanner
Please follow the step-by-step procedures described below to install the Plustek
scanner.
Step 1. Connecting the Scanner to Your Computer
1. Plug the square end of the included USB cable to the USB port of the scanner.
2. Plug the rectangular end of the USB cable to the USB port on the back of your
computer.
Note: If there is another USB device connected to the computer, connect the
scanner to an available USB port.
connected to the USB port in your computer. Next, connect the scanner to the
USB hub.
Note: If you do not have a USB port available, you might need to buy a USB port.
Step 2. Installing the Software
1. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the “Add New Hardware Wizard” or
“Found New Hardware Wizard” to be launched. Note: If your computer was off
when you connected the scanner, the “Add New Hardware Wizard” message will
be displayed when you turn the computer on and when Windows starts.
3 The USB hub is not included with the scanner. If using a hub, you are recommended to use a
hub with its own external power adapter.
6
2. For Windows 98 & 2000
a. Click on the [Next] button when the “Add New Hardware Wizard” window is
displayed.
b. Select “Search For The Best Driver For Your Device [Recommended]” and
click on the [Next] button.
c. The next window will ask you where to search to find the drive. Select [CD-
ROM drive], and deselect [Floppy disk drives] if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click on the [Next] button.
e. Click on the [Next] button in the window that appears. Afterwards, for
Windows 98 users, please skip to Step 4.
f. Windows 2000 users – During the process of the installation, a message
“Digital Signature required” might be prompted. Please ignore it, and click on
[Yes] to continue the installation without any misgiving at your scanner
functioning. Afterwards, please skip to Step 4.
3. For Windows XP & Me
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select “Install The Software Automatically [Recommended]” and click on the
[Next] button.
c. Click on the [Next] button in the window that appears.
4. When the system completes the installation, click on the [Finish] button.
5. Follow the on-screen instructions to install all software that your new USB scanner
requires.
6. After the software is installed, close all open applications and click on the [Finish]
button to restart your computer.
7. After the computer is restarted, you will be prompted to perform the scanner
7
calibration.
8. Insert the special calibration sheet, included with the scanner, face up into the page
feed of the scanner.
9. Follow the on-screen instructions to complete the scanner calibration.
Note: The buttons on the scanner are designed to work with bundled software. To
make those buttons work properly, you need to install NewSoft Presto! ImageFolio
and Cardiris software in the CD-ROM to your system.
If the scanner installation is not started and displayed automatically on
the screen, click [START], select [Run] and type in [d:\setup] (where d:
is the drive letter assigned to the CD-ROM drive of your computer.)
Attention
Step 3. Testing the Scanner
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Insert the document or image face up into the scanner. Align the paper to the
arrow sign on the left of the scanner.
2. Press the SCAN button on the scanner. The scanning starts immediately.
3. When the scan completes, Presto! ImageFolio program opens.
4. If an image appears on your screen, your scanner is working properly.
8
If the test failed in any way, please refer to “Appendix A:
Troubleshooting” section of this manual and follow the instructions
therein.
Attention
Software Setup Troubleshooting
Carefully review the steps outlined in this guide and the Quick Guide that
accompanied your scanner.
If you are still having problems, please check that:
ꢃ
ꢃ
ꢃ
ꢃ
ꢃ
You have 250MB of free space on your hard disk drive.
The scanner is plugged in and has power.
You are using the USB cable supplied with the scanner.
The square end of the USB cable is plugged into the rear of the scanner.
The rectangular end of the USB cable is plugged into the back of your
computer.
If you deviated from the installation procedures defined in this manual, please
unplug the USB cable from the scanner and reinstall the software from the CD-ROM.
To reinstall your scanner’s software, click [Start], [Run], then type D:\Setup (where D
represents the letter of your CD-ROM drive). Carefully follow all the installation
instructions presented in the Setup Wizard. Reboot your computer when prompted,
and plug the USB cable back into the scanner while your computer is still turned on.
Installing Additional Software
Your scanner is TWAIN compliant and functions with virtually all available TWAIN
compatible software. If you purchase additional software to be used with your scanner,
please make sure that it conforms to the TWAIN standard.
Scanner Setup After Windows XP Upgrade
If you plan to upgrade your operating system from Windows 98 or Me to Windows
XP after having installed the scanner software, please follow the instructions below:
1. Unplug the scanner’s USB cable from the rear of the computer.
2. From the Windows START menu, click on [Programs] and then [Plustek
OptiCard 820]. In the pop-up menu that opens, click on [Uninstall Plustek
OptiCard 820]. Follow the on-screen instructions to remove all the scanner
software.
3. After uninstallation completes, close all open applications and click the [Finish]
button to restart your computer.
9
4. Start installing your Windows XP upgrade software by following Microsoft’s
related procedures.
5. When the Windows XP upgrade is done, re-install the scanner’s hardware and
software. Refer to the scanner setup quick guide for details.
10
Chapter II.
Usage and Maintenance
Operating the Scanner
Your scanner accepts documents as small as business cards and as large as
4”x6” photographs. However, some software programs have limitations as to the
information they can handle. The capacity of the computer’s memory and free space on
your hard drive can also limit the physical size of the document that you scan.
There are two different ways to operate the scanner:
1. From within an image-editing program that can acquire images from the
scanner.
2. By pressing either of the two action buttons on the scanner. You may
configure the button settings individually to your personal needs within the
Smart Touch program that is automatically installed as your scanner software.
Your scanner needs to be driven by some type of software program. Since all
documents or images (whether text or pictures) that are acquired from the scanner are
treated by your computer as images, most scanning will probably be done from an
image-editing program where you can view, edit, save and output the scanned images.
An image-editing program has been bundled with your scanner on the included
Setup/Application CD-ROM. It will allow you to alter and correct any scanned images
by using a variety of filters, tools and effects.
What about scanning business cards and managing them in a more convenient
way? This is the role of BCR function which can scan various business cards to
Cardiris software. Cardiris can index the scanned images into business cards album,
recognize and convert respective personal information contained in the scanned
images into an address database for your further management. If you wish to use the
scanner in this way you should install the Cardiris software that is included in the
Setup/Application CD-ROM.
Smart Touch is a program that allows you to conveniently scan images and text
without the need to work directly within any image-editing application (i.e. Presto!
ImageFolio). Smart Touch also includes BCR function which allows you to set
scanning attributes for the business cards you are to scan to Cardiris software.
Please refer to the Smart Touch Setting on-line Help (accessible by clicking on the
Smart Touch icon
, located near the clock icon on the Windows system tray, and
choosing Help) for more information about these functions.
11
Using the Scanner Buttons
Your scanner is equipped with two function buttons designed to make your
scanning experience more convenient and efficient. With simply one touch of the
button, you can scan to Presto! ImageFolio or Cardiris program.
1. SCAN Button
2. BCR Button
To use the buttons, ensure you have installed the relevant software
(e.g., Newsoft Presto! ImageFolio is required for using the SCAN
function) beforehand.
Attention
Scan Button
The SCAN button enables you to conveniently scan documents or images, save
them automatically to the destination folder, and send them to the NewSoft Presto!
ImageFolio program to perform other image editing tasks.
Continuous scans by the same settings:
If you have more than one similar document or image to scan, follow the steps
below:
12
1. Click on the Smart Touch icon
located on the Windows system tray.
From the menu that pops up, point to [SCAN Button Link] and then click
[Continuous Scan].
2. Insert the document or image face up into the scanner. Align the paper to the
arrow sign on the left of the scanner.
3. Press the SCAN button on the scanner. The scanning starts immediately.
4. Follow the on-screen instructions to insert another document or image until
you have scanned all.
5. When the scan completes, the scanned images appear in the Presto!
ImageFolio program that opens, ready for you to perform other image editing
tasks.
Single scan by different settings:
If you would like to scan documents or images with individual settings, follow the
steps below:
1. Click on the Smart Touch icon
located on the Windows system tray.
From the menu that pops up, point to [SCAN Button Link] and then click
[Single Scan].
2. To change the scanning settings, click on the Smart Touch icon
again,
and then click [Properties] from the menu that pops up. Make desired
adjustments within the Smart Touch Setting window that opens and then click
[Close] button.
13
Changes you make in the Smart Touch window are
automatically saved every time you click Close to close the
Smart Touch window.
Attention
3. Insert the document or image face up into the scanner. Align the paper to the
arrow sign on the left of the scanner.
4. Press the SCAN button on the scanner. The scanning starts immediately.
5. When the scan completes, the scanned image appears in the Presto!
ImageFolio program that opens, ready for you to perform other image editing
tasks.
6. If you have more documents or images to scan, repeat Step 2-5 until you
have scanned all.
BCR Button
The BCR button enables you to conveniently scan business cards and send them
to Cardiris program. Cardiris can index the scanned images into business cards album,
recognize and convert respective personal information contained in the scanned
images into an address database for your further management. For more information
about Cardiris, please refer to its on-line help.
14
Continuous scans by the same settings:
If you have more than one business card with similar card style to scan (for
example, those business cards are from the same country), you can follow the steps
below:
1. Click on the Smart Touch icon
located on the Windows system tray.
From the menu that pops up, point to [BCR Button Link] and then click
[Continuous Scan].
2. Insert the business card face up into the scanner. Align the paper to the
arrow sign on the left of the scanner.
3. Press the BCR button on the scanner. The scanning starts immediately.
4. Follow the on-screen instructions to insert another business card until you
have scanned all.
5. When the scan completes, the scanned images will be sent to Cardiris
program.
Single scan by different settings:
If you would like to scan business cards with individual settings, follow the steps
below:
1. Click on the Smart Touch icon
located on the Windows system tray.
From the menu that pops up, point to [BCR Button Link] and then click [Single
Scan].
15
2. To change the scanning settings, click on the Smart Touch icon
again,
and then click [Properties] from the menu that pops up. Make desired
adjustments within the Smart Touch Setting window that opens and then click
[Close] button.
Changes you make in the Smart Touch window are
automatically saved every time you click Close to close the
Smart Touch window.
Attention
3. Insert the business card face up into the scanner. Align the paper to the
arrow sign on the left of the scanner.
4. Press the BCR button on the scanner. The scanning starts immediately.
5. When the scan completes, the scanned image is sent to Cardiris program.
6. If you have more business cards to scan, repeat Step 2-5 until you have
scanned all.
Changing Button Settings
Default button settings are optimized for most frequently scanning jobs, such as
size, mode, resolution, ... You may, however, change the settings to tailor your every
scan by accessing the “Smart Touch Setting” program. Please refer to the Smart Touch
on-line Help (accessible by clicking on the Smart Touch icon
, located near the
clock icon on the Windows system tray, and choosing Help) for more information about
these functions.
Status Indicator
The green LED indicator (located beside BCR button) indicates the status of the
scanner, as described below:
Light
Status
On
The scanner is connected with the computer, ready to scan images.
Flashing The scanner is busy scanning.
Off The scanner is off, either because of disconnection with the
computer, or because the computer being turned off.
16
Scanner Connection
The first step to take when troubleshooting connection problems with your
scanner is to check all physical connections. The Smart Touch icon
, located on
the Windows system tray, indicates if the scanner software is properly launched and
the scanner and computer are communicating with each other.
Appearance
Status
The Smart Touch program has been successfully launched and
the scanner is connected with the computer, ready to scan
mages.
The scanner is not connected with the computer.
No Display
You have chosen to terminate the Smart Touch program, no
matter the scanner is connected or disconnected with the
computer.
If the Windows system starts and detects the scanner unconnected, the following
message will appear to remind you:
If you prefer not to see this reminder message again, you may:
ꢃ
Check the box of [Do not show this message again] within this message
window, and then click [OK] button.
17
ꢃ
Click on the Smart Touch icon
located on the Windows system tray.
Uncheck [Enable Warning] from the menu that pops up. Click the [No] button
in the message box that appears.
If you would like to be prompted with this message again,
you may click on the Smart Touch icon
and check
[Enable Warning] from the menu that pops up. Click the
[Yes] button in the message box that appears.
Attention
Maintenance
Calibrating the Scanner
Calibrate the scanner if colors appear in areas that should be white, or colors of
the scanned image and the original vary a lot. This allows you to adjust and
compensate for variations which can occur in the optical component over time by its
nature.
The following describes how to calibrate the scanner:
1. Insert the special calibration sheet face up into the page feed slot of the
scanner.
Please insert the special calibration sheet included with the
scanner. Alternatively you may also use any plain white sheet
of paper sized in A6 (105 by 148 mm) instead; however, the
Attention
calibration effect may be less good than the special calibration
sheet.
2. Click on the Smart Touch icon
located on the Windows system tray.
3. Click [Calibrate] from the menu that pops up.
4. The scanner pulls the calibration sheet through the scanner, which completes
this scanner calibration.
18
Cleaning the Scanner
When you use this scanner for the very first time after installation, you are
suggested to clean the scanner before use.
If unusual dots or lines are found in your scanned image, it is very likely that dust
particles or other foreign objects have been brought inside the scanner. You may
clean the scanner to rectify the problem.
The following describes how to clean the scanner:
1. Insert the special cleaning paper into the page feed slot of the scanner.
ꢁ
ꢁ
Do use the cleaning paper included in our package box.
Remember to replace the cleaning paper in a safe and
clean place when you finish using it.
Caution
Do not use anything other than our cleaning paper to clean
your scanner. Using other sheet will influence the scan
quality or even lead to scanner malfunction.
2. Click on the Smart Touch icon
located on the Windows system tray.
3. Click [Clean] from the menu that pops up.
4. The scanner pulls the cleaning paper through the scanner, which completes
this scanner cleaning.
Usage & Maintenance Tips
To keep your scanner working smoothly, take a moment to review
the following usage & maintenance tips.
Caution
ꢃ
ꢃ
Avoid using the scanner in a dusty environment. Dust particles and other
foreign objects may damage the unit. If you will not use the scanner for
some time, please place it in the travel pouch.
Do use the USB cable provided with the scanner. Use of other cable may
lead to malfunction.
19
ꢃ
ꢃ
ꢃ
ꢃ
Do not attempt to disassemble the scanner. There is danger of an electrical
shock and opening your scanner will void your warranty.
Do not subject the scanner to excessive vibration. It may damage the internal
components.
Do not insert any document into the scanner with small objects such as
paper clips, pins, staples or any other fasteners attached.
Do not insert damp, curled or wrinkled documents into the scanner for
scanning. These documents can cause paper jams and possibly damage the
unit.
ꢃ
Your scanner operates best in temperatures between 10° C to 40° C (50° F
to 104° F).
20
Appendix A: Troubleshooting
Scanning Problems
Most problems are easily solved, and some of the most common questions and
their recommended solutions are listed below.
Symptom:
After following the installation instructions, my computer cannot
find the scanner.
Cause 1:
Your software may have not been successfully installed.
Solution 1: Please insert the CD-ROM and reinstall the scanner software. Follow the
on-screen instructions carefully when installing the software.
Cause 2:
Some aspect of your computer system does not support USB.
and execute the file USBREADY.EXE
Solution 2: Download
at
USB support.
Cause 3:
USB is not enabled in your BIOS settings.
Solution 3:
Enable the USB controller in your BIOS settings. This is typically done
BIOS Settings screen that appears, find the option for USB and enable
it. Exit and Save the changes you made. Your computer is rebooted
automatically. Please consult your computer vendor before attempting
to do this change.
Cause 4:
The USB controller was improperly installed on your computer.
To reinstall the USB controller, click on the Start button, choose Settings
and select Control Panel. In the window that opens, double-click on the
Add New Hardware icon. Carefully follow the instructions that appear on
your screen.
Solution 4:
Symptom:
Cause:
The scanned image looks grainy on the screen.
Your video mode is not set to show more than 256 colors.
We recommend that you set your video mode to 16 bits per pixel (65536
colors) or higher. Please consult your video card, computer or Windows
documentation to change the video mode.
Solution:
Symptom:
Cause 1:
The scanner scans very slow.
You are running other applications in the background.
Close all the other applications that are running in the background.
Solution1:
4 Please consult your computer manual on how to modify your BIOS/CMOS settings.
21
Cause 2:
You are scanning at a high resolution (DPI).
Reduce the resolution.
Solution 2:
Symptom:
Solution:
The scanner is not in the list of supported scanners in other
commercial software.
Select TWAIN as the scanner.
Symptom:
Solution:
Unable to scan from other software other than the one that came
with the scanner.
Enter the Scanner Setup within the program, Select TWAIN and you will
see your scanner listed.
Symptom:
Cause 1:
Unable to save to a floppy diskette.
The floppy disk might be write protected.
Move the write protection tab, located in the back of the diskette, to the
closed position.
Solution 1:
Cause 2:
Your disk might not be formatted.
Format the diskette.
Solution 2:
Cause 3:
There is not enough space available in the disk to save the document.
Delete any files that you do not need from the floppy disk.
Solution 3:
Cause 4:
You might be scanning your document at a high resolution. Documents
scanned using higher resolution modes will take a considerable amount
of disk space.
Solution 4:
Reduce the resolution.
Symptom:
The image looks good in the software that came with the scanner
but it does not look good when I export the image to another
program.
Cause:
Different imaging programs use different Monitor Gamma settings.
Change the Monitor Gamma settings in either of the programs so that
they match. Please consult the help files for each program to find out
how to adjust the Monitor Gamma.
Solution:
Symptom:
The image looks good in the screen but is very dark when printed.
The Monitor Gamma Settings or the scanner brightness settings are not
set properly.
Cause1:
Solution 1:
1) Change the Monitor Gamma to a value between 1.0 and 1.5.
Please consult your help file for information on how to adjust the
Monitor Gamma.
2) Adjust the brightness control in the TWAIN window before scanning.
22
Cause2:
The printer brightness setting is not set properly.
Solution 2:
Adjust the brightness in the printer. Some printers allow you to change
the brightness settings. Please consult your printer documentation.
Symptom:
The scanned image takes too long to be sent with an email
message.
Cause1:
The image was scanned at a high resolution or is physically large.
Scan at a lower resolution (DPI).
Solution1:
Cause 2:
The Internet might be congested.
Solution 2:
Try sending the message at a later time.
Symptom:
The image that I sent through email looks good in my computer but
it looks dark in the recipient computer.
Solution:
The Monitor gamma settings should be approximately the same in your
and the recipient computer.
Symptom:
A. -Disk is full- error is displayed when I click on the scan button.
Your computer is running low in resources. Your computer hard disk
drive does not have enough space to process the image. This may be
because you are scanning at too high of a resolution.
Cause:
Solution:
Obtain a larger hard disk or rescan at a lower resolution.
Symptom:
A -Disk I/O error- message is displayed.
Cause 1:
This error is caused if the hard disk drive does not have enough space
available to process the image.
Solution 1:
Make some space available in the hard disk drive by deleting any
programs or files that you do not need.
Cause 2:
Your hard disk drive might be heavily fragmented or it might contain
some bad sectors.
Solution 2:
Run the Scan Disk utility that came with your Windows computer.
Please consult your computer documentation or the Windows help files
on how to run the Scan Disk Utility.
Symptom:
Cause 1:
The error “Scanner not Found” that is displayed.
The USB cables are not connected properly.
Solution 1:
Make sure that the cables are connected tightly and to the proper port.
Cause 2:
The USB cable might be too long.
Solution 2:
Please use the USB cable that comes with your scanner.
Cause 3:
The scanner’s power cord is not connected properly.
23
Solution 3:
Make sure that the AC adapter is connected to an outlet. If the scanner
is connected to a Surge Protector, make sure that the Surge Protector is
turned on.
Symptom:
The document or photo has been inserted into the scanner but is
not fed through the scanner.
Cause 1:
The document or photo was not correctly inserted into the scanner.
Make sure the document or photo is properly inserted into the page feed
of the scanner.
Solution 1:
Solution 2:
Cause 2:
The paper may be too think or too thick.
The thickness of the paper is out of scanner specifications.
Symptom:
The document or photo got jammed while getting fed into the
scanner.
Cause:
The document or photo was not correctly inserted into the scanner.
Grab ahold of the jammed paper and pull it through the scanner. Try to
avoid creasing, wrinkling or tearing the paper.
Solution:
Common -How-to- Questions
Symptom:
How do I save the scanned image in JPG format?
Solution:
1) In the Image-editor, click on [File] and then [Save As].
2) Select the folder where you want to save your image.
3) Select JPEG or JPG under Save as type:
4) Type the name of the file name for your image.
Symptom:
How do I cut an image and paste in another program?
1) Select the area that you want to cut.
2) Click on [Edit].
Solution:
3) Click on [Cut].
4) Start the program and open the document where you want to paste
your image.
5) Click on [Edit].
6) Click on [Paste].
Please consult your program documentation on how to Cut and Paste if
you have any more questions.
Symptom:
How do I place a scanned image into my word processor?
1) Find out what formats are supported by your word processor.
2) Write the name and the location of the file before you save it.
3) Save in a format supported by your word processor.
4) Depending on your word processor, select [Insert] or [Import] from
your menu, then select [Image] or [Picture].
Solution:
24
Consult your Word Processor documentation for more information on
how to import images.
Symptom:
How do I send a scanned image using my email program?
Save your scanned image in a format that is supported by your email
program (JPG, GIF or PNG are recommended). Once your picture is
saved, consult the documentation of your email program on how to
attach a file to a message.
Solution:
25
Appendix B:
Specifications5
Plustek OptiCard 820
174.5mm x 60.5mm x 38.5 mm
194g
Physical
dimensions
Weight
Operating
Temperature
10° C to 40° C (50° F to 104° F)
Maximum 105 mm x 148 mm (4.13” x 5.83”)
Minimum 33mm x 43 mm
Scan Area
Scan Method
Single –Pass
Color: Input 48-it; Output 24/48-bit
Grayscale: Input 16-bit; Output 8/16-bit
Black & White: 1-bit
Scan Modes
Resolution
Scanning
Materials
Protocols
Connection
Light Source
Power
Optical 600 dpi (1200dpi software interpolated)
Reflective color or black-and-white originals
Paper Thickness: from 0.08 mm to 0.9 mm
TWAIN Compliant
USB 2.0
Three-color RGB LEDs
Powered through USB port. No AC power adaptor is required.
Requirement
Power
Operation: 2.5 watts maximum
Idle: 0.7 watts
Consumption
EMI
FCC Class B
5 Hardware specifications may change at any time without prior notice.
26
Appendix C:
Customer Service and Warranty
If you encounter problems with your scanner, please review the installation
instructions and troubleshooting suggestions contained in this guide.
For further assistance call our customer support phone number listed on the last
page of this guide. One of our representatives will be happy to assist you from Monday
through Friday in office working hours as shown below:
Europe
9:00 a.m. – 5:30 p.m. (CET)
Other Countries or Areas
9:00 a.m. – 6:00 p.m. Taiwan Time
To avoid delays, please have the following information available before calling:
ꢃ
ꢃ
ꢃ
ꢃ
ꢃ
ꢃ
ꢃ
Scanner name and model number
Scanner serial number (Located at the bottom of the scanner)
A detailed description of the problem
Your computer manufacturer and its model number
The speed of your CPU (Pentium 133, etc.)
Your current operating system and BIOS (optional)
Name of software package(s), version or release number and manufacturer
of the software
ꢃ
Other USB devices installed
Statement of Limited Warranty
This Statement of Limited Warranty applies only to the options you originally
purchase for your use, and not for resale, from an authorized reseller.
The manufacturer warranty includes all parts and labor, and is not valid without
the receipt of original purchase. To obtain warranty service, you may contact the
authorized dealer or distributor, or visit our website to check out the available service
information, or send a request via E-mail for further help.
If you transfer this product to another user, warranty service is available to that
user for the remainder of the warranty period. You should give your proof of purchase
and this statement to that user.
We warrant that this machine will be in good working order and will conform to its
functional descriptions in the documentation provided. Upon provision of proof of
purchase, replacement parts assume the remaining warranty of the parts they replace.
Before presenting this product for warranty service, you must remove all
programmes, data and removable storage media. Products returned without guides
and software will be replaced without guides and software.
27
This Limited Warranty service does not provide for carry-in exchange when the
problem results from accident, disaster, vandalism, misuse, abuse, unsuitable
environment, programme modification, another machine or non-vendor modification for
this product.
If this product is an optional feature, this Limited Warranty applies only when the
feature is used in a machine for which it was designed.
If you have any questions about your Limited Warranty, contact the approved
retailer from whom you bought the product or the manufacturer.
THIS LIMITED WARRANTY REPLACES ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABLITY AND FITNESS FOR A PARTICULAR PURPOSE. HOWEVER,
SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF
THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD. NO OTHER WARRANTIES
APPLY AFTER THAT PERIOD.
Some jurisdictions do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply.
Under no circumstances are we liable for any of the following:
1. Third party claims against you for losses or damages.
2. Loss of, or damage to, your records or data; or
3. Economic consequential damages (including lost profits or savings) or
incidental damages, even if we are informed of their possibility.
Some jurisdictions do not allow the exclusion or limitations of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other
rights that vary from jurisdiction to jurisdiction.
FCC Radio Frequency Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular television reception (which can be determined by turning
the equipment off and on), the user is encouraged to try to correct the interference by
one or more of the following measures:
ꢃ
Reorient or relocate the receiving antenna.
28
ꢃ
ꢃ
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that which the
receiver is connected.
ꢃ
Shielded interconnect cables and shielded power cord which are supplied
with this equipment must be employed with this equipment to ensure
compliance with the pertinent RF emission limits governing this device.
Consult the dealer or an experienced radio/TV technician for help if the
conditions persist.
ꢃ
ꢃ
Changes or modifications not expressly approved by the manufacturer or
authorized service center could void the user’s authority to operate this
equipment.
29
Contacting Plustek
Europe
Plustek Technology GmbH
Gutenbergring 38, 22848 Norderstedt, Germany
Tel.:
+49 (0) 40 523 03 130
+49 (0) 40 523 03 500
Fax:
E-mail:
Website:
Worldwide except
Europe
Plustek Inc.
13F-1,No.3 (Building F), Yuan Qu St., Taipei, Taiwan.
Tel:
+886-2-2655 7866
+886-2-2655 7833
Fax:
Website:
30
|