Panasonic Wv Cf224 User Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS  
q
Color CCTV Camera  
i
o
!
Operating Instructions  
w
e
r
t
!
Model No.WV-CF224  
y
u
Before attempting to connect or operate this product,  
please read these instructions carefully and save this manual for future use.  
q Camera Panel  
ON  
OFF  
N0503-1103  
3TR001728BAA  
Printed in Japan  
AP  
SHARP* SOFT  
w Pan/Tilt/Azimuth Table  
BLC  
ON  
OFF*  
LL  
Adjusts the panning/tilting and azimuth  
angle of the camera.  
For U.S.A  
SYNC INT*  
NOTE: This equipment has been tested and found  
to comply with the limits for a Class A digital  
device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference when the  
equipment is operated in a commercial environ-  
ment. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed  
and used in accordance with the instruction manu-  
al, may cause harmful interference to radio com-  
munications.  
e Focus Lever  
i Aperture Level Selector  
Fixes the focus position after adjusting.  
CAUTION  
SHARP: Sharpens the image outline.  
SOFT: Softens the image outline.  
The default setting is SHARP.  
RISK OF ELECTRIC  
r Zoom Lever  
SHOCK DO NOT OPEN  
Fixes the zoom position after adjusting.  
o Back Light Compensation Selector  
ON: Compensates the background if it is  
brighter than the object.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE. REFER SER-  
VICING TO QUALIFIED SERVICE PERSONNEL.  
t Video Jack (3.5-diam. mini jack)  
For connecting an LCD monitor to adjust  
the camera images. Use an L-type plug to  
save space.  
Operation of this equipment in a residential area is  
likely to cause harmful interference in which case  
the user will be required to correct the interference  
at his own expense.  
OFF: Does not compensate.  
The default setting is OFF.  
y Video Output Connector  
! Synchronization Mode Selector  
Specifies a source for synchronization.  
INT: Internal 2:1 interlace.  
FCC Caution: To assure continued compliance,  
(example - use only shielded interface cables when  
connecting to computer or peripheral devices). Any  
changes or modifications not expressly approved  
by the party responsible for compliance could void  
the user’s authority to operate this equipment.  
The lightning flash with arrowhead  
symbol, within an equilateral trian-  
gle, is interned to alert the user to  
the presence of uninsulated "dan-  
gerous voltage" within the product's  
enclosure that may be of sufficient  
Supplies the video output signals. The sig-  
nals will be interrupted when the video jack  
is connected to an LCD monitor.  
LL: Line-lock mode driven by 24 V AC.  
The default setting is INT.  
Note: Do not set the switch to LL (Line-  
Lock) position when supplying 12 V  
DC to avoid synchronization error.  
u Power Cable  
Supplies 24 V AC or 12 V DC from an exter-  
nal power source.  
SA 1965  
magnitude to constitute a risk of  
electric shock to persons.  
The serial number of this product may be found on  
the top of the unit.  
You should note the serial number of this unit in the  
space provided and retain this instruction as a per-  
manent record of your purchase to aid identification  
in the event of theft.  
! Panel Cover  
The exclamation point within an  
equilateral triangle is intended to  
alert the user to the presence of  
important operating and mainte-  
nance (servicing) instructions in the  
literature accompanying the appli-  
ance.  
INSTALLATION  
Model No.  
Serial No.  
WV-CF224  
SA 1966  
Installation Plans & Preparations  
Mounting the Camera  
The camera can be installed on a junction box  
or directly on the wall/ceiling.  
Disassembly of the camera  
1. Remove the panel cover with a Phillips  
screwdriver.  
WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture.  
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
2. Turn the panel cover counter-clockwise.  
Front / Upper  
46 mm  
(1-13/16")  
4-ø4.5 mm  
(4-ø3/16")  
PREFACE  
The WV-CF224 is a 1/4-inch CCD color camera  
designed for use in video surveillance systems.  
The camera features a high picture quality  
thanks to the use of digital signal processing  
LSIs, and easy mounting on the ceiling or wall.  
Cable access hole  
ø18 mm (11/16")  
3. Remove the panel cover.  
PRECAUTIONS  
Sideway cable exit  
1. This product should be installed and con-  
nected by qualified service personnel or  
system installers in conformity with NEC.  
7. Do not use strong or abrasive  
detergents.  
1. Locally procure four camera-mounting  
screws suitable for the installation surface  
and structure of the wall/ceiling or junction  
box. There are four 4.5 mm (3/16”) diame-  
ter screw holes and a guide hole on the  
camera panel.  
Use a dry cloth to clean the camera body  
when dirty.  
In case the dirt is hard to remove, use a  
2. Use a class 2 power source supplying 12 V  
DC or 24 V AC.  
mild  
detergent  
and  
wipe  
gently.  
Afterwards, wipe off the remaining deter-  
gent with a dry cloth.  
3. To prevent fire or electric shock hazard,  
use a UL listed cable (VW-1, style 1007) to  
connect the power supply to the camera.  
2. Preparations  
• When planning to use a junction box, pro-  
cure one locally that meets the dimensions  
in the figure.  
• When directly mounting on the wall/ceiling,  
prepare a space which is ø135 mm or larg-  
er.  
8. Clean the lens faceplate with care.  
Do not clean the lens with strong or abra-  
sive detergents. Use lens tissue or a cotton  
tipped applicator and ethanol.  
4. Be sure to use a ceiling board/wall having  
enough strength to support this camera.  
5. Do not attempt to disassemble the  
camera.  
9. Never face the camera towards the sun.  
Do not aim the camera at bright objects.  
Whether the camera is in use or not, never  
aim it at the sun or other extremely bright  
objects. Otherwise, blooming or smear may  
be caused.  
3. Cable route  
• When using a junction box, cables will go  
behind the junction box via the cable  
access hole on the camera panel.  
• When directly mounting on the wall/ceiling,  
you need to cut out the panel cover to  
make a sideway exit for cables.  
To prevent electric shock, do not remove  
screws or covers.  
There are no user-serviceable parts inside.  
Ask qualified service personnel for servic-  
ing.  
4. Remove the inner dome.  
10. Do not operate the camera beyond its  
specifications.  
6. Handle the camera with care.  
Do not abuse the camera. Avoid striking,  
shaking, etc. The camera could be dam-  
aged by improper handling or storage.  
Use the camera under conditions where  
temperature is between –10°C to +50°C  
(14°F to 122°F), and humidity is below  
90%. The input power source is 24 V AC or  
12 V DC.  
11. Use a monitor whose resolution is at least  
equal to that of the camera.  

Sears Kenmore 66162463 User Manual
NEC NP PA572W 02 User Manual
Mitsubishi S12r Y2ptaw 1 User Manual
LG 42PM1MA User Manual
Lexmark 3048476 User Manual
EMERSON LIEBERT GXT4 6000RT208 User Manual
DELTA VFB080C4L1 User Manual
CRAFTSMAN 139.53525SRT User Manual
BROTHER HL L2350DW 02 User Manual
ASUS VE228N User Manual