Premium DECT
Digital Baby Monitor
Secure 510
User Guide
TABLE OF CONTENTS
3
IMPORTANT SAFETY INFORMATION ....................................................... 4
GETTING STARTED .................................................................................. 7
ORICOM DIGITAL BABY MONITOR .......................................................... 8
SETTING UP.............................................................................................. 14
USING YOUR DIGITAL BABY MONITOR ................................................... 19
TROUBLESHOOTING................................................................................ 38
CUSTOMER SUPPORT.............................................................................. 40
WARRANTY............................................................................................... 41
4
IMPORTANT SAFETY INFORMATION
Important Safety Information
s )T IS VERY IMPORTANT THAT YOU READ THE 5SER 'UIDE CAREFULLY AS IT CONTAINS DETAILED
information you will need to get the most from your Oricom Baby Monitor. If you
HAVE ANY ISSUES SETTING UP OR USING YOUR /RICOM "ABY MONITOR PLEASE CALL OUR
Customer support team. Our dedicated local team are more likely to be able to
help you than the retailer where you made your purchase.
s 9OUR /2)#/- "ABY -ONITOR IS DESIGNED TO BE AN AID AND SHOULD NOT BE USED
AS A SUBSTITUTE FOR RESPONSIBLE AND PROPER ADULT SUPERVISION OF A CHILDꢀ
s 4HE "ABY -ONITOR HAS BEEN DESIGNED TO PROVIDE SOME ADDED REASSURANCE IN
the form of sound transmission for those times when you are not in the same
ROOM AS YOUR BABY PROVIDED YOU ALWAYS STAY WITHIN HEARING RANGE OF THE BABY
MONITOR DURING USEꢀ 9OUR "ABY -ONITOR IS NOT A MEDICAL DEVICEꢁ NOR A DEVICE
TO PREVENT CASES OF 3UDDEN )NFANT $EATH 3YNDROME ꢂ3)$g3 OR ꢃCOT DEATHꢃꢁ
AND YOU SHOULD NOT RELY ON IT FOR YOUR BABYgS WELLBEINGꢀ )T IS IMPORTANT THAT YOU
regularly check on your baby personally.
s -AKE SURE THE "ABY UNITꢁ 0ARENT UNIT AND MAINS ADAPTOR CABLES ARE KEPT OUT
of reach of your baby and other young children at all times, at least one metre
away.
s .EVER PLACE THE BABY UNIT OR PARENT UNIT INSIDE YOUR BABYꢄS COTꢁ BED OR PLAYPENꢀ
s .EVER COVER THE 0ARENT OR BABY UNITS WITH CLOTHESꢁ TOWELS OR BLANKETS OR ANY
OTHER ITEMꢀ .EVER USE OR PLACE YOUR 0ARENT OR "ABY UNIT IN OR NEAR MOISTURE OR
water (e.g. near bath or pool). Immersing in water could cause electric shock
AND EVEN DEATHꢀ
IMPORTANT SAFETY INFORMATION
5
s 4HE INSTALLATION LOCATION PLAYS AN IMPORTANT ROLE IN ENSURING PROPER OPERATIONꢀ
Therefore, maintain a distance of at least one meter from other electronic
EQUIPMENTꢁ SUCH AS MICROWAVE OVENS OR HI¥l DEVICESꢁ OTHERWISE THEY COULD
CAUSE INTERFERENCEꢀ $URING CONTINUAL USE THE "ABY UNIT POWER ADAPTORS MAY
become warm to the touch. This is normal and should not be a concern.
Warning
2ISK OF SUFFOCATIONꢅ
+EEP ALL PACKAGING MATERIALS AND PROTECTIVE FOILS OUT OF REACH OF CHILDRENꢀ
$O NOT PLACE THE !# !DAPTOR CABLE IN A HIGH ꢃWEAR AND TEARꢃ LOCATIONꢀ .EVER USE A
ꢅ
frayed or compromised cord.
Battery safety
s "ATTERIES REPRESENT A HAZARD TO HEALTH AND THE ENVIRONMENTꢅ
s 4HEY CONTAIN TOXICꢁ ECOLOGICALLY HAZARDOUS HEAVY METALSꢀ $O NOT DISPOSE OF
BATTERIES IN A lRE AS THEY MAY EXPLODEꢀ $ISPOSE OF BATTERIES ACCORDING TO LOCAL
REGULATIONSꢁ NEVER IN YOUR HOUSEHOLD RUBBISHꢀ
s $O NOT DISMANTLEꢁ CUTꢁ OPENꢁ CRUSHꢁ BENDꢁ PUNCTUREꢁ OR SHRED CELLS OR BATTERIESꢀ
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens,
immediately flush the affected areas with water, and seek medical assistance.
s
$O NOT MODIFYꢁ REMANUFACTUREꢁ ATTEMPT TO INSERT FOREIGN OBJECTS INTO THE BATTERYꢁ OR
immerse or expose it to water or other liquids. Batteries may explode if damaged.
6
IMPORTANT SAFETY INFORMATION
s 5SE ONLY THE BATTERIES SUPPLIED WITH THE PRODUCTꢀ )MPROPER USEꢁ OR USE OF
UNAPPROVED BATTERIES MAY PRESENT A RISK OF lREꢁ EXPLOSIONꢁ OR OTHER HAZARDꢁ AND
MAY INVALIDATE ANY APPROVAL OR WARRANTYꢀ
s
)F YOU BELIEVE THE BATTERIES ARE DAMAGEDꢁ REMOVE PRODUCT FROM THE CHARGER AND
STOP USING THE PRODUCTꢀ #ONTACT /RICOM FOR ASSISTANCEꢀ .EVER USE A DAMAGED
battery.
Disposal
Always dispose of your products at the end of their life in accordance with
your local waste disposal requirements. Packaging materials all cardboard
and paper packaging should be recycled in accordance with your local council
waste regulations.
GETTING STARTED
7
'OT EVERYTHINGꢆ
s "ABY UNIT
This User Guide provides you with all the
information you need to get the most from
your Oricom Digital Baby Monitor.
s 0ARENT UNIT
s ꢇ X !! .I-( ꢈꢉꢊꢊM!H
rechargeable batteries for
Parent unit (pre-installed)
Please read this guide carefully and keep
it for future reference.
Need help?
s 0ARENT UNIT CHARGER
s ꢇ X POWER ADAPTERS
If you need assistance setting up or using your
/RICOM $IGITAL "ABY -ONITOR CALL OUR 3UPPORT
team on 1300 889 785. If you would like any
additional or replacement rechargeable batteries
for the parent unit (Part No.BAT1300MAH) order
/UR DEDICATED ADVISORS ARE MORE LIKELY TO BE ABLE
to help you than the retailer where you made your
purchase.
!LTERNATIVELYꢁ YOU MAY lND THE ANSWER IN THE @(ELPꢄ
section at the back of this guide.
Additional answers to Frequently Asked Questions
ARE ALSO AVAILABLE FROM WWWꢀORICOMꢀCOMꢀAU
8
ORICOM DIGITAL BABY MONITOR
Mute Low
(on top of unit)
Mute All
(on top of unit)
Parent unit
Power on/off
Press to toggle the
Baby unit microphone
SENSITIVITY BETWEEN
normal and Mute Low.
Press to toggle the (on top of unit)
0ARENT UNIT RECEIVE
VOLUME BETWEEN
on and off.
Press and hold to
switch the power
on or off.
Baby sound level LEDs
)NDICATES THE LEVEL OF RECEIVED
SOUNDꢀ 4HE ,%$S WILL LIGHT UP
PROGRESSIVELY AS THE SOUND
increases. See page 20 for
further information.
Torch (on back of unit)
Press to switch the torch feature
on and off.
Link indicator
Steady green indicates that the
Baby and Parent units are linked.
Flashes green if no link established
for 30 seconds. Flashes red if no
link established after 30 seconds.
Also flashes green when the Talk
button is pressed on the Parent
unit to initiate parental talk back.
Mute LED
Steady red indicates that Mute
All has been switched on.
Amber indicates that Mute Low
has been switched on.
Talk (on side of unit)
Press to talk to your baby.
Battery status indicator
Red light indicates the batteries
are low and need re-charging.
LCD Display
0OWER SAVING BACKLIGHT TURNS ON
when you press any button and
then switches off after 15 seconds.
Microphone
OK
0RESS TO CONlRM THE MENU OPTION
displayed.
Up
Menu
Press to open the menu.
Down
$ECREASE SPEAKER
)NCREASE SPEAKER VOLUMEꢀ
Scroll through the menu options.
Press and hold to exit the menu
and return to the idle screen.
VOLUMEꢀ 3CROLL THROUGH
the menu options.
ORICOM DIGITAL BABY MONITOR
9
Parent unit display icons
Menu options:
Nightlight
Music
Feed Timer
Setup
Battery status
&EED TIMER ON ꢂVIBRATE ON
&EED TIMER ON ꢂVIBRATE OFF
4EMPERATURE ALERT ꢂVIBRATE ON
4EMPERATURE ALERT ꢂVIBRATE OFF
Nightlight is on
Full charge (75-100%)
Medium charge (51-74%)
Low charge (25-50%)
Empty (8-24%)
Music is playing
$ISPLAYS THE TEMPERATURE AS
measured at the Baby unit
Flashing (0-7%)
Icon will scroll when charging
#RYING ALERT ꢂVIBRATE ON
#RYING ALERT ꢂVIBRATE OFF
Indicates when you can scroll
up or down through the menu
options
10 ORICOM DIGITAL BABY MONITOR
Parent unit charger
Front
Charging light
Red when the Parent unit is
correctly placed on the charger.
Back
Power socket
For connection to the mains
POWER SOCKET VIA THE POWER
adaptor cable supplied.
ORICOM DIGITAL BABY MONITOR 11
Temperature sensor
Baby unit
Make sure the sensor is placed
with clear space around it and
not in contact with any surfaces
TO ENSURE IT WORKS EFFECTIVELYꢀ
Nightlight
Press to switch the
Nightlight on or off.
Microphone
Brightness
Power on/off
Press and hold to switch
the power on or off.
0RESS TO ADJUST THE NIGHTLIGHT
brightness: high, medium or
low (once the nightlight has
been switched on).
Skip forward
When music has been
switched on (see Music
button description below),
press to skip through the
SONGS AVAILABLEꢀ
Find
Press to emit an alert beep
from the Parent unit – useful
FOR lNDING THE 0ARENT UNIT IF
YOUꢄVE MISPLACED ITꢀ
Music
Press to switch music on
Volume up/down
at the Baby unit (the music
and duration will be as last
set at the Parent unit). Press
again to switch the music
off. To change the song,
press the Skip button.
Increase or decrease the
LOUDSPEAKER VOLUME FOR PLAYING
music or for parental talk back.
Nightlight
Illuminates around the base.
Link indicator
Steady green indicates that the Baby and Parent units are linked.
Flashes green if no link established for 30 seconds. Flashes red if no link
established after 30 seconds. Also flashes green when the Talk button is
pressed on the Parent unit to initiate parental talk back.
12 ORICOM DIGITAL BABY MONITOR
Back of Baby unit
Power socket
For connection to the mains power
SOCKET VIA THE POWER ADAPTOR CABLE
supplied.
ORICOM DIGITAL BABY MONITOR 13
Parent unit menu map
Turn (On/Off)?
Brightness
Timer
High
Medium
Low
Nightlight
5 min
10 min
15 min
Constant
(Play/Stop)?
3 Blind Mice
Brahms
Choose Song
Music
5 min
#ANON IN $
$REAM #HASE
$REAMING
Hush Baby
Night Night
Twinkle Star
Play All
10 min
15 min
Constant
Timer
Menu
(Start/Stop) Timer
Set Time
Duration
Feed Timer
Repeat On
Repeat Off
Timer Repeat
Timer Alert
Beep
Beep&Vibe
Vibrate
Beep
Beep&Vibe
Vibrate
Crying Alert
Temp Alert
Backlight
Beep
Setup
Screen only
Beep&Vibe
Vibrate
Screen only
Off
On w alerts
Off w alerts
14 SETTING UP
Parent unit
1. Plug one of the power adaptor cables into the socket marked
on the back of
the Parent unit charger and plug the other end into the mains power wall socket
and switch the power on.
ꢇꢀ !CTIVATE THE BATTERIES BY PULLING THE PLASTIC TAB AWAY FROM THE BACK OF THE 0ARENT
unit.
SETTING UP 15
3. Place the Parent unit into the charger. The red charging light will illuminate on
the charger and the battery icon will start scrolling on the Parent until display to
indicate that the batteries are being charged.
Low battery indicator
Battery icon
Charging light
,EAVE THE BATTERIES TO CHARGE FOR ꢈꢋ HOURS TO REACH MAXIMUM CHARGEꢀ 7HEN THE
batteries are fully charged the battery icon on the display will show a full charge
.
Warning
/NLY USE THE POWER ADAPTORS SUPPLIEDꢀ 5SING INCORRECT POWER MAY PERMANENTLY
damage your product. This product is designed for indoor use only.
ꢅ
16 SETTING UP
Battery performance
Rechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new
BATTERIES DO NOT REACH FULL CAPACITY UNTIL THEY HAVE BEEN IN NORMAL USE FOR SEVERAL DAYSꢀ
The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the
PERFORMANCE TIME OF THE 0ARENT UNITꢀ %VENTUALLY THEY WILL NEED TO BE REPLACEDꢀ .EW BATTERIES CAN BE
OBTAINED FROM THE /RICOM $IGITAL "ABY -ONITOR 3UPPORT #ENTRE ꢈꢉꢊꢊ ꢌꢌꢍ ꢎꢌꢏꢀ
4HE 0ARENT UNIT RECHARGEABLE BATTERIES WILL LOSE CHARGE OVER A PERIOD OF TIMEꢁ EVEN IF SWITCHED OFFꢀ
Battery low warning – Parent unit
When the batteries are low – approximately within 1 hour of running out – the Parent unit will emit
a low battery alert, the low battery indicator will turn red, the display will show Low Battery and the
icon will flash. Place the Parent unit back on the charger to charge the batteries. To speed up the
CHARGING PROCESS TURN THE 0ARENT UNIT OFF WHEN CHARGING IF ITꢄS NOT BEING USEDꢀ
9OU CAN STILL USE YOUR 0ARENT UNIT TO MONITOR YOUR BABY EVEN WHEN THE BATTERIES ARE LOWꢁ PROVIDED IT
remains in the charger cradle to re-charge the batteries.
Baby unit
1. Plug the remaining power adaptor cable into the socket marked
on the back
of the Baby unit and plug the other end into the mains power and switch on.
SETTING UP 17
Switch on and link the Parent and Baby units
1. Press and hold the
button on the Baby unit for 1 second. The nightlight will
briefly illuminate and then the green Link indicator will flash.
2. Press and hold the
BUTTON ON THE 0ARENT UNIT UNTIL ALL THE ,%$S ON THE UNIT BRIEmY
illuminate. The green Link indicator will flash and the display will show I’m Linking.
Warning
.EVER USE NONꢐRECHARGEABLE BATTERIES IN THE 0ARENT UNITꢀ /NLY USE THE RECOMMENDED
TYPE n ꢇ X !! .I-( ꢈꢉꢊꢊM!H BATTERIESꢀ 5SING OTHER TYPES COULD PERMANENTLY
damage the unit. Charge the batteries as instructed in this user guide. The Parent unit
can still be used when it is in the charger.
ꢅ
Removing the batteries
)F YOU EVER NEED TO REMOVE THE BATTERIESꢁ SIMPLY SLIDE OPEN THE BATTERY COMPARTMENT COVER AND USE THE
RIBBON TO EJECT THE BATTERIESꢀ
Once the units are Linked the green Link light on the top of the Parent unit and
THE GREEN ,%$ ON THE "ABY UNIT WILL STOP mASHING AND REMAIN A STEADY GREENꢀ 4HE
units are now ready to use.
IMPORTANT
4HE LINK CONlRMATION BETWEEN THE TWO UNITS IS VITAL FOR USE SO THEY CAN COMMUNICATEꢀ )F
ꢅ
the link between the units is broken at any time, the Link indicators on both units will flash
green as they try to search for each other. The Parent unit displays I’m Linking...After 30
seconds, if the link is still broken, the Baby and Parent units Link indicators will flash red.
The Parent unit display will show No Link and you will hear an alert signal.
18 SETTING UP
If the link is broken:
s CHECK THAT THE MAINS POWER IS PLUGGED IN AND SWITCHED ON AT THE "ABY UNIT
s CHECK THAT BOTH UNITS ARE SWITCHED ON
s CHECK THAT THE BATTERIES ARE CHARGED IN THE 0ARENT UNIT
s CHECK THAT THE 0ARENT AND "ABY UNITS ARE WITHIN RANGE OF EACH OTHER ꢂIN IDEAL
conditions the range is up to 300 metres outdoors and 50m indoors)
Positioning your units
The Baby unit should ideally be within 1m-2m of your baby for best performance.
If you place the Parent and Baby units too close together you will hear a high pitched noise, this is
normal. The units are designed to be located at a distance from one another, e.g. in separate rooms.
USING YOUR DIGITAL BABY MONITOR 19
Switching on/off
Switch the Baby unit on
1. Press and hold the
button for 1 second. The nightlight will briefly illuminate
and then the green Link indicator will flash until it links with the Parent unit.
Once linked the green Link indicator will remain on.
Switch the Parent unit on
1. Press and hold the
BUTTON ON THE 0ARENT UNIT UNTIL ALL THE ,%$S BRIEmY
illuminate. The green Link indicator will flash and the display will show I’m
Linking.
Once the units are linked the green Link indicators on the Parent and Baby
units will stop flashing and remain a steady green. The units are now ready to
use.
Switch the Baby unit off
1. Press and hold the
switch off.
button on the Baby unit. The green Link indicator will
Switch the Parent unit off
1. Press and hold the
button on the Parent unit until an audible alert sounds.
The green Link indicator will switch off and the display will go blank.
20 USING YOUR DIGITAL BABY MONITOR
Baby sound level LED indicators
LEDs 1-2 = Green
(or Amber if
LEDs 3-4 = Green
LEDs 5-7 = Red
Mute Low is on)
4HE SEVEN ,%$S ACROSS THE TOP OF THE 0ARENT UNIT LIGHT UP TO INDICATE THE LEVEL
OF SOUND BEING RECEIVED FROM THE "ABY UNITꢀ 4HE ,%$S LIGHT UP PROGRESSIVELY AS
the sound increases.
LEDs 1-2 LIGHT UP 'REEN ꢂOR !MBER IF -UTE ,OW IS ONꢁ SEE PAGE ꢈꢌ WHEN
SOUNDS OF ꢏꢎD" AND ꢋꢉD" ARE RECEIVEDꢀ
LEDs 3-4 LIGHT UP 'REEN WHEN SOUNDS OF ꢋꢍD" AND ꢎꢏD" ARE RECEIVEDꢀ
LEDs 5-7 LIGHT UP 2ED WHEN SOUNDS OF ꢌꢉD"ꢁ ꢌꢍD" OR ꢍꢏD" ARE RECEIVEDꢀ
Equivalent sound level examples:
ꢋꢊD"ꢐꢎꢊD" ꢑ NORMAL CONVERSATION
ꢎꢏD" ꢑ LOUD CONVERSATION
ꢌꢉꢐꢍꢏD" ꢑ LOUD TRAFlC NOISE
USING YOUR DIGITAL BABY MONITOR 21
Adjust the loudspeaker volume
At the Parent unit:
1. Press
SETTINGꢀ 4HERE ARE ꢏ VOLUME LEVELS AND OFF ꢂ-UTE ꢀ 4HE VOLUME LEVEL WILL BE
SHOWN ON THE DISPLAY AT EACH PRESSꢁ EꢀGꢀ ,EVEL ꢉ IS SHOWN AS Volume
or
TO SELECT THE REQUIRED LEVELꢀ 4HE lRST PRESS WILL SHOW THE CURRENT
.
)F YOU WISH TO SWITCH THE VOLUME OFFꢁ KEEP PRESSING
Volume Off. The Mute All indicator will illuminate.
until the display shows
At the Baby unit:
4HERE ARE ꢏ VOLUME SETTINGSꢀ
1. When Music is being played or Talk back is in progress from the Parent unit,
press the or BUTTON TO ADJUST THE VOLUMEꢀ
2. If no music or Talk back is in use, pressing the
or
BUTTONS WILL ADJUST THE
VOLUME AND A BEEP WILL SOUND AT THE APPROPRIATE VOLUME LEVEL SETꢀ
)F YOU TRY AND SET THE VOLUME HIGHER OR LOWER THAN THE ꢏ SETTINGS AVAILABLE ON EITHER UNIT YOU WILL HEAR AN
error tone.
Setting the Parent unit to Volume Off IS THE EQUIVALENT OF SWITCHING THE -UTE !LL FEATURE ONꢀ 3EE PAGE
22 for more information on Mute All.
4HE DEFAULT LOUDSPEAKER VOLUME ON BOTH UNITS IS ,EVEL ꢉꢀ
22 USING YOUR DIGITAL BABY MONITOR
Mute All feature – Parent unit only
4HE -UTE !LL FEATURE PREVENTS ANY SOUND COMING FROM THE 0ARENT UNIT
loudspeaker. With Mute All on you can still monitor your baby using the Baby
SOUND LEVEL ,%$ INDICATORS ꢂPAGE ꢇꢊ AND THE #RYING !LERT ꢂPAGE ꢉꢒ ꢀ
1. To switch Mute All on, press the
Mute indicator will illuminated red.
button located on the top of the unit. The
2. To switch Mute All off, press the
switch off.
button again. The red Mute indicator will
Be careful not to accidentally switch the torch feature on because Mute All is automatically switched on
when the Torch is switched on.
3ETTING THE 0ARENT UNIT LOUDSPEAKER VOLUME TO Volume off IS THE EQUIVALENT OF SWITCHING THE -UTE !LL
feature on.
Mute Low
&OR DISCREET OPERATION WHEN YOU DO NOT WISH TO HEAR ANY LOW LEVEL SOUNDSꢁ YOU
CAN STILL MONITOR YOUR BABY USING THE "ABY SOUND LEVEL ,%$ INDICATORS ꢂPAGE
20). When Mute Low is switched on, any sounds from the Baby unit to the
0ARENT UNIT WILL BE MUTED UNLESS A SOUND IS MADE ABOVE A SET LEVELꢀ 4HE SET
LEVEL ARE SOUNDS THAT ARE LOUDER THAN THE lRST TWO GREEN ,%$S WOULD REGISTERꢁ AS
DESCRIBED IN @"ABY SOUND LEVEL ,%$ INDICATORS ON PAGE ꢇꢊꢀ
If the
or
buttons are pressed whilst Mute All or Mute Low has been set then Mute All or Low
WILL BE SWITCHED OFF AND THE LOUDSPEAKER VOLUME WILL RETURN TO ,EVEL ꢉ AUTOMATICALLYꢀ
USING YOUR DIGITAL BABY MONITOR 23
)F THE 0ARENT UNIT RECEIVES SOUND UP TO THE LEVEL OF THE lRST TWO ,%$S THEN THEY
WILL TURN AMBER BUT NO SOUND WILL BE HEARDꢁ IF THE SOUND RISES ABOVE THIS LEVEL
then the unit will un-mute so you can hear the sounds.
1. To switch Mute Low on, press the
unit. The Mute indicator will turn amber.
button located on the top of the Parent
2. To switch Mute Low off, press the
button again. The amber indicator will switch off.
Once the Mute Low sound threshold has been exceeded, baby sounds will be able to be heard for a
FURTHER SIX SECONDS EVEN IF THEY DO NOT REACH THE -UTE ,OW THRESHOLDꢀ
Talk Back
9OU CAN USE THE 0ARENT UNIT 4ALK "ACK FEATURE AS A ONE WAY INTERCOM TO COMFORT
and reassure your baby. By speaking into the Parent unit your baby will hear
YOUR VOICE FROM THE "ABY UNITꢀ 0LEASE NOTE THAT WHEN USING 4ALK "ACK YOU WILL
not be able to hear your baby until you release the
button.
1. Press and hold down the button on the Parent unit to speak to your baby.
Whilst the button is depressed the display will show Talk and the green
Link indicators will flash on both units.
Talk Back
9OU WILL BE ABLE TO ACTIVATE 4ALK "ACK MODE EVEN IF OTHER FUNCTIONS HAVE BEEN ACTIVATED AT THE "ABY UNIT
like Music playback or Nightlight on.
Press
$O NOT PRESS THE
or
TO ADJUST THE 4ALK "ACK VOLUME LEVEL OF THE "ABY UNIT LOUDSPEAKERꢀ
button when the Baby unit and Parent unit are positioned in the same room.
High-pitch noise will be generated if the
button is pressed when Baby unit and Parent unit are
close to each other or within 3 metres distance.
When using Talk Back, hold the Parent unit approximately 30cm in front of your mouth when talking to baby.
24 USING YOUR DIGITAL BABY MONITOR
Find
9OU CAN PRESS THE
button on the Baby unit to make the Parent unit sound
AN ALERT TO HELP YOU lND IT IF ITꢄS BEEN MISPLACEDꢀ )F THE 0ARENT UNIT LOUDSPEAKER
VOLUME HAD BEEN -UTED ꢂOR SET TO VOLUME OFF ꢁ THE VOLUME LEVEL WILL BE RESET TO
THE DEFAULT SETTING OF ,EVEL ꢉꢀ
1. Press
on the Baby unit. The paging alert will sound at the Parent unit and
the display will show Here I am!
2. To stop the alert, press any button on the Parent unit or press the
button
again on the Baby unit. If no button is pressed after 2 minutes then the alert will
automatically stop.
Torch
4HE 0ARENT UNIT HAS A HIGH INTENSITY WHITE ,%$ TORCH THAT CAN BE USED WHEN THE
Parent unit is switched on or off.
1. Press the
on and off.
button located on the back of the Parent unit to switch the Torch
When the Torch is switched on it will automatically switch Mute All on as well. If you then press the
BUTTON -UTE WILL BE DISABLED AND THE 4ORCH WILL REMAIN ONꢀ 7HEN THE 4ORCH IS SWITCHED OFFꢁ THE PREVIOUS
Mute setting will be restored (No Mute, Mute All or Mute Low).
USING YOUR DIGITAL BABY MONITOR 25
The Parent unit menu
The
button on the Parent unit can be used to select and change settings on the
"ABY UNIT WITHOUT HAVING TO RISK DISTURBING YOUR BABYꢀ9OU CAN ACCESS THE SETTINGS BYꢓ
1. Press
then press
or
to scroll through the menu options shown on
when the option you want is displayed.
the top of the display. Press
ꢇꢀ 4HE lRST SUB MENU OPTION WILL BE DISPLAYEDꢁ PRESS
to scroll through the
options. The ( arrows) indicate when you can scroll either up or down. Press
when the option you want is displayed.
3. To exit the menu at any time, press
at a time, or press and hold
BRIEmY AND STEP BACK ONE MENU LEVEL
to return to the idle screen. If no buttons are
pressed for 10 seconds whilst accessing the menu, the display will return to idle
AND ANY UNSAVED CHANGES WILL BE LOSTꢀ
Nightlight
9OU CAN SET A COMFORTING NIGHTLIGHT ON THE "ABY UNITꢀ 4HERE ARE ꢉ BRIGHTNESS LEVELS
to choose from and you can set a period of time for the nightlight to illuminate.
The Baby unit must be switched on for the nightlight to work, but need not be linked to the Parent unit.
Switch nightlight on/off and select brightness level using the Baby unit
1. To switch on, press the
2. TPress REPEATEDLY TO SELECT THE BRIGHTNESS LEVELꢀ
2. To switch off, press
button.
.
26 USING YOUR DIGITAL BABY MONITOR
Switch nightlight on/off using the Parent unit
1. To switch on, press the
button. Nightlight is displayed, press
.
2. Turn On? is displayed, press
. Light On will briefly be displayed, then the
icon.
3. To switch off, press
displayed, press
will disappear.
. Nightlight is displayed, press
. Turn Off? is
. Light Off will briefly be displayed and then the
icon
Select the nightlight brightness level using the Parent unit
1. Press
2. Press
3. Press
. Nightlight is displayed, press
.
to display Brightness and press
.
or
to display either Low, Medium or High and press
to
select. The display will show Saved BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ
The default setting is Medium.
Set the nightlight timer
1. Press
2. Press
3. Press
. Nightlight is displayed, press
.
to display Timer and press
.
or
to select.
to display either 5 min, 10 min, 15 min or Constant and press
The display will show Saved BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ
The default setting is Constant.
USING YOUR DIGITAL BABY MONITOR 27
Play music from the Baby unit
The Baby unit has eight songs that can be played to gently soothe your baby.
9OU CAN SELECT ONE SONG TO PLAY REPEATEDLY OR SELECT THE 0LAY !LL OPTION FOR A
medley of all eight songs. The songs can be set to play in a loop for 5, 10 or 15
MINUTES OR YOU CAN LEAVE THEM PLAYING CONSTANTLYꢀ
The default music setting is Play All songs Constantly.
Turn music on/off using the Baby unit
1. To turn the music on, press the
button. The most recently selected song will
start playing at the time period last selected using the Parent unit.
2. Press the button repeatedly to change the pre-selected song.
3. To turn the music off, press the
button.
!DJUST THE VOLUME OF THE MUSIC USING THE
or
buttons on the Baby unit.
)F MUSIC IS PLAYED AT GREATER THAN VOLUME ꢉꢁ THE #RYING !LERT MAY ACTIVATE IF -UTE !LL IS USEDꢀ
Turn music on/off using the Parent unit
1. To turn the music on, press
Music and press
. Nightlight is displayed, press
to display
.
2. Play? is displayed, press
name of the song and the
unit.
. The display will briefly show Music On, then the
icon and the song will start to play on the Baby
3. To turn the music off, press
, press
to display Music and press
. The
display will show Stop?, press
. The display will show Music Off, the
icon will disappear and the music will stop playing on the Baby unit.
28 USING YOUR DIGITAL BABY MONITOR
Choose a song to play using the Parent unit
1. Press
2. Play? is displayed, press
ꢉꢀ 5SE THE
. Nightlight is displayed, press
to display Choose Song and press
buttons to scroll through the eight song titles and Play All.
when the option you want is displayed. The display will show Saved
to display Music and press
.
.
and
Press
BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ
4HE EIGHT SONG CHOICES AREꢓ ꢉ "LIND -ICEꢁ "RAHMSꢁ #ANON IN $ꢁ $REAM #HASEꢁ $REAMINGꢁ (USH "ABYꢁ
Night Night and Twinkle Star.
Play All will play a medley of all eight songs.
Set a play time for music
1. Press
2. Play? is displayed, press
ꢉꢀ 5SE THE and buttons to scroll through the options: 5 min, 10 min, 15
min or Constant and press when the option you want is displayed. The
display will show Saved BRIEmY AND YOUꢄLL HEAR A CONlRMATION TONEꢀ
. Nightlight is displayed, press
to display Music and press
.
until Timer is displayed and press
.
USING YOUR DIGITAL BABY MONITOR 29
Feed Timer
9OU CAN SET A &EED 4IMER ON THE 0ARENT UNIT TO ACT AS A COUNTDOWN TIMER THAT
WILL ALERT YOU WHEN YOU NEXT NEED TO FEED YOUR BABYꢀ 9OU HAVE A CHOICE OF ALERT
TYPES ꢂBEEPꢁ BEEP ꢔ VIBE AND VIBRATE AND YOU CAN SET THE TIMER TO REPEAT ITSELF
once the alert sounds.
Set the feed timer countdown duration
1. Press
press
. Nightlight is displayed, press
.
until Feed Timer is displayed and
2. Start? is displayed, press
3. The display will show 02h:00m ꢂOR THE CURRENTLY SET TIMER ꢀ 5SE THE
BUTTONS TO SELECT THE lRST DIGIT AND PRESS . Repeat this procedure for each
. The display will show Saved AND YOUꢄLL HEAR A CONlRMATION
to display Duration and press
.
and
digit and press
beep.
The timer can be set from 1 minute to 99 hours 59 minutes.
The feed timer default countdown duration is set at 02:00 (2 hours).
If the Parent unit is switched off, the feed timer countdown will be cancelled and you will need to start it
again when the unit is switched back on. The duration, alert type and repeat settings will still be retained.
30 USING YOUR DIGITAL BABY MONITOR
Start the feed timer countdown
1. Press
press
. Nightlight is displayed, press
.
until Feed Timer is displayed and
2. Start? is displayed, press
. The display will briefly show Timer On and then
the timer will be shown counting down the seconds from the time you set.
7HEN THE TIMER HAS lNISHED COUNTING DOWN TO 00:00 you will hear an alert beep
and the timer digits and
icon will flash. Press any button on the Parent unit
to stop the alert. If you do not stop the alert it will automatically stop after 2
minutes (or it will start again if Timer Repeat has been set).
Cancel the feed timer countdown
1. Press
press
. Nightlight is displayed, press
.
until Feed Timer is displayed and
2. Stop? is displayed, press
. The display will briefly show Timer Off , the
timer will then disappear and the display will return to idle.
USING YOUR DIGITAL BABY MONITOR 31
Switch timer repeat option on or off
1. Press
press
. Nightlight is displayed, press
.
until Feed Timer is displayed and
2. Start? is displayed, press
3. 5SE THE and
until Timer Repeat is displayed and press
buttons to display either Repeat On or Repeat Off and press
to select. The display will show Saved AND YOU WILL HEAR A CONlRMATION BEEPꢀ
.
When Repeat On has been set, the feed timer countdown will start again once
the alert has sounded if it is not switched off.
The default setting is Repeat On.
Select the type of feed timer alert
1. Press
press
. Nightlight is displayed, press
.
until Feed Timer is displayed and
2. Start? is displayed, press
until Alert is displayed and press
buttons to display either Beep, Beep&Vibe or Vibrate
to select. The display will show Saved and you will hear a
.
3. 5SE THE
and
and press
CONlRMATION BEEPꢀ
Feed timer alert options:
Beep = Parent unit will emit an alert beep only.
Beep&Vibe ꢑ 0ARENT UNIT WILL EMIT AN ALERT BEEP AND VIBRATEꢀ
Vibrate ꢑ 0ARENT UNIT WILL VIBRATE ONLYꢀ
The default setting is Beep&Vibe.
32 USING YOUR DIGITAL BABY MONITOR
IMPORTANT
4HE TEMPERATURE SENSOR USED IN THIS /RICOM $IGITAL "ABY -ONITOR IS INTENDED AS A
ꢅ
GUIDEꢁ TO PROVIDE PARENTS WITH AN INDICATION OF THE ROOM TEMPERATURE IN WHICH THE
Baby unit has been placed.
It is designed to operate within an approximate tolerance of +/- 1°C and is not
INTENDED TO BE AS ACCURATE AS SOME MEDICAL DEVICESꢀ 0LEASE NOTE THAT YOUR OWN
temperature reference e.g. your central heating thermostat may not be as accurate,
possibly due to tolerances and positioning of the thermostat in relation to the Baby
Monitor sensor.
(EALTHCARE PROFESSIONALS ADVISE THAT THE IDEAL TEMPERATURE FOR YOUR BABYꢄS ROOM IS
between 16 °C and 20°C.
9OUR 0ARENT UNIT HAS A BUILTꢐIN MECHANISM TO PREVENT REPEATED ANNOYING AUDIBLE ALERTS
IF THE ROOM TEMPERATURE HOVERS AROUND AN ALERTING THRESHOLDꢀ
Temperature monitor
There is a temperature sensor on the Baby unit to constantly monitor the
TEMPERATURE IN YOUR BABYꢄS ROOM AND YOUꢄLL BE ALERTED IF IT GETS TOO HOTꢁ TOO
WARM OR TOO COLDꢀ 4HE 0ARENT UNIT WILL VIBRATEꢁ SOUND AN ALERT BEEP AND DISPLAY
a message on the screen. The alerts on the Parent unit can be changed, see
page 34. The temperature will be constantly shown on the Parent unit display in
˚C. To stop an alert beep, press any button on the Parent unit.
USING YOUR DIGITAL BABY MONITOR 33
Temperature monitor indicators
Temperature
Below 16°C
16 – 20°C
21 – 24°C
/VER ꢇꢒ #
On the Parent unit
$ISPLAY SHOWS Too Cold
$ISPLAY SHOWS Too Warm
$ISPLAY SHOWS Too Hot
Select the type of temperature alert
1. Press
press
. Nightlight is displayed, press
until SetUp is displayed and
.
2. Crying Alert is displayed, press
until Temp Alert is displayed and press
.
3. 5SE THE and
buttons to display either Beep, Beep&Vibe, Vibrate,
Screen Only or Off and press
to select. The display will show Saved and
YOU WILL HEAR A CONlRMATION BEEPꢀ
To stop an alert beep, press any button on the Parent unit.
34 USING YOUR DIGITAL BABY MONITOR
Temperature alert options
Beep = Parent unit will beep. icon will flash.
Beep&Vibe ꢑ 0ARENT UNIT WILL BEEP AND VIBRATEꢀ icon will flash.
Vibrate ꢑ 0ARENT UNIT WILL VIBRATEꢀ icon will flash.
Screen Only = icon will flash.
Off = No alerts. icon will not be displayed.
!LL OF THE ABOVE ALERTS WILL ALSO DISPLAY THE APPROPRIATE MESSAGEꢓ Too Hot, Too
Warm or Too Cold.
Pre-set temperature alert range
The Baby unit comes with pre-set maximum and minimum temperatures. If the temperature falls below
OR GOES ABOVE THE SETTING AN ALERT WILL SOUND ON THE 0ARENT UNIT AND THE DISPLAY WILL SHOW Too Cold or
Too Hot AS APPROPRIATEꢀ 4HE TEMPERATURE ALERT PREꢐSET TEMPERATURES ARE BELOW ꢈꢋ # AND ABOVE ꢇꢒ #ꢀ
Alerts will be repeated if the temperature creeps by 2°C into an alerting range.
The default setting is Beep&Vibrate.
Crying alert
4HE CRYING ALERT WILL ONLY BE ACTIVATED IF -UTE !LL HAS BEEN SWITCHED ON ꢂOR
IF THE 0ARENT UNIT VOLUME HAS BEEN SWITCHED TO VOLUME OFF ꢁ SEE PAGE ꢇꢇ FOR
information on the Mute All feature.
With Mute All switched on, if your baby starts to cry you will not be able to hear
THE CRIESꢁ BUT IF THE CRIES SOUND ABOVE A CERTAIN LEVEL IꢀEꢀ IF THEY REACH ꢌꢉD"!ꢁ
WHICH IS THE ꢈST RED "ABY SOUND LEVEL ,%$ꢁ THEN THE 0ARENT UNIT WILL ACTIVATE THE
CRYING ALERTꢀ 4HE DEFAULT CRYING ALERT IS FOR THE 0ARENT UNIT TO VIBRATE AND EMIT AN
audible beep but you can select a different alert if you want to.
USING YOUR DIGITAL BABY MONITOR 35
Select the type of crying alert
1. Press
press
. Nightlight is displayed, press
until SetUp is displayed and
.
2. Crying Alert is displayed, press
3. 5SE THE and
.
buttons to display either Beep, Beep&Vibe, Vibrate or
Screen Only and press
to select. The display will show Saved and you will
HEAR A CONlRMATION BEEPꢀ
To stop an alert beep, press any button on the Parent unit.
Crying alert options
Beep = Parent unit will beep, Crying Alert will be displayed and
icon will flash.
Beep&Vibe ꢑ 0ARENT UNIT WILL BEEP AND VIBRATEꢀ Crying Alert will be displayed and
icon will flash.
Vibrate ꢑ 0ARENT UNIT WILL VIBRATE ONLY ꢂNO ALERT BEEP WILL SOUND ꢀ Crying Alert will be displayed and the
icon will flash.
Screen Only = Crying Alert will be displayed and the
icon will flash.
The default setting is Beep&Vibrate.
36 USING YOUR DIGITAL BABY MONITOR
Backlight
9OU CAN SELECT WHETHER OR NOT THE ,#$ BACKLIGHT COMES ON WHEN AN ALERT IS
ACTIVATEDꢀ 7HEN THE BACKLIGHT COMES ON IT WILL STAY ON FOR ꢈꢏ SECONDSꢀ 4HE
default setting is On.
1. Press
press
. Nightlight is displayed, press
until SetUp is displayed and
.
2. Crying Alert is displayed, press
until Backlight is displayed and press
buttons to display either On w alerts or Off w alerts
to select. The display will show Saved and you will hear a
.
3. 5SE THE
and
and press
CONlRMATION BEEPꢀ
List of tones
9OUR "ABY -ONITOR UNIT CAN PRODUCE VARIOUS TONESꢀ 4HEY HAVE THE FOLLOWING
meaning:
Tone
Meaning
Single tone
$OUBLE TONE ꢂFAST
#ONlRMATION TONE EꢀGꢀ SETTING SAVEDꢀ
%RROR TONE EꢀGꢀ MAX VOLUME REACHED WHEN
ADJUSTING VOLUMEꢀ
$OUBLE TONE ꢂSLOW 5SER ALERT EꢀGꢀ CRYING ALERTꢁ PAGING ALERT ETCꢀ
Triple tone (fast) System alert e.g. link lost, battery low etc.
USING YOUR DIGITAL BABY MONITOR 37
5SER !LERT TONES CAN BE SILENCED BY PRESSING ANY BUTTON ON THE 0ARENT UNITꢀ
System Alerts can be silenced for a 5 minute period by pressing any button on
the Parent unit.
Reset the units
Resetting either units will return the settings at that unit back to its default
settings.
2ESETTING THE UNITS IS ONLY ADVISABLE IF YOU ARE EXPERIENCING DIFlCULTIES WITH YOUR PRODUCTꢀ )T IS A USEFUL
feature that ensures your Baby Monitor is returned to its new “out of the box” settings.
Reset the Parent unit
1. Within 3 seconds of the Parent unit being switched on, press and hold the
button for at least 10 seconds. The display will show Reset for 2 seconds during
THE RESET AND THEN YOU WILL HEAR A CONlRMATION BEEP ONCE THE RESET HAS BEEN
performed.
Reset the Baby unit
1. Within 3 seconds of the Baby unit being switched on, press the
least 10 seconds.
button for at
9OU WILL HEAR A CONlRMATION BEEP ONCE THE RESET HAS BEEN PERFORMEDꢀ
38 TROUBLESHOOTING
Should you experience difficulties operating the SC510 please refer to the
TROUBLESHOOTING GUIDE BELOWꢀ )F YOU STILL EXPERIENCE DIFlCULTIES PLEASE CONTACT /RICOM
Customer Support on 1300 889 785 for assistance.
Troubleshooting
Problems
Solutions
Link light does not ¥ #HECK THAT BOTH THE "ABY AND 0ARENT UNITS ARE
come on
switched on.
¥ #HECK THAT THE BATTERIES IN THE 0ARENT UNIT ARE CORRECTLY
installed and that they are charged.
¥ #HECK THAT THE MAINS POWER IS PLUGGED IN AND
switched on at the Baby unit.
¥ #HECK THAT THE UNITS ARE WITHIN RANGE OF EACH OTHERꢀ
Link light is flashing ¥ )F YOU HAVE PRESSED
to use the Talk Back
green
feature, the Link light will flash to indicate one-way
communication between the units.
¥ 4HE UNITS ARE SEARCHING FOR A COMMUNICATION LINKꢀ
¥ #HECK UNITS ARE WITHIN RANGE OF ONE ANOTHERꢀ
¥ #HECK BOTH UNITS ARE TURNED ONꢀ
Link indicator is
flashing red
¥ 4HE LINK BETWEEN YOUR UNITS IS BROKENꢀ 9OU WILL ALSO
hear an alert on the Parent unit to let you know
there is no communication between the units. If this
happens, check that the mains power (or batteries) is
correctly connected and that the units are within range
of one another. See page 17 for instructions on linking
the units.
TROUBLESHOOTING 39
Battery low on
Parent unit
¥ 0UT THE 0ARENT UNIT BACK ON THE CHARGER TO CHARGEꢀ
¥ 0LACE 0ARENT UNIT BACK ON THE CHARGER AS FREQUENTLY
AS POSSIBLE OR IDEALLY LEAVE IT ON THE CHARGER TO ENSURE
the batteries remain charged.
¥ 4O SHORTEN THE CHARGING TIME YOU CAN TURN THE 0ARENT
unit off if it is not being used while it is charging.
Parent unit remains ¥ 9OU MAY HAVE SET THE VOLUME TOO LOWꢁ SEE PAGE ꢇꢇ TO
SILENT OR VERY QUIET
INCREASE THE VOLUMEꢀ
¥ 9OU MAY HAVE SWITCHED A -UTE FEATURE ONꢁ SEE PAGES
22.
9OU CAN HEAR A HIGH ¥ 4HE UNITS MIGHT BE TOO CLOSE TO EACH OTHERꢀ
pitched noise ¥ 4HE VOLUME SETTING MIGHT BE TOO HIGHꢁ SEE PAGE ꢇꢈꢀ
Talk back feature is ¥ #HECK THAT THE VOLUME IS LOUD ENOUGH AT THE "ABY UNITꢁ
not working
see page 21.
¥ #HECK THE UNITS ARE LINKEDꢁ SEE PAGE ꢈꢎꢀ
40 CUSTOMER SUPPORT
Customer Support
)F YOU HAVE ANY PROBLEMS SETTING UP OR USING THIS PRODUCT YOU WILL lND USEFUL
tips and information in the Troubleshooting section of this user guide as well as
)F YOU HAVE FURTHER QUESTIONS ABOUT USING THE PRODUCT AFTER REVIEWING THE
RESOURCES ABOVE OR WOULD LIKE TO PURCHASE REPLACEMENT PARTS OR ACCESSORIES
please call our Customer Support Team. Our dedicated local support team
are more likely to be able to help you than the retailer where you made your
purchase.
Importan
t
Please retain your purchase receipt and attach to the back page of this user
GUIDE AS YOU WILL NEED TO PRODUCE THIS IF WARRANTY SERVICE IS REQUIREDꢀ 4AKE A
WARRANTY 41
How to make a claim under Warranty in Australia
Oricom has a simple warranty process for you to follow:
s 0LEASE CALL OR EMAIL OUR #USTOMER 3UPPORT 4EAMꢁ CONTACT DETAILS FOLLOWꢀ
s ! #USTOMER 3UPPORT 4EAM MEMBER WILL VERIFY AFTER TROUBLESHOOTING WITH YOU
IF YOUR PRODUCT QUALIlES UNDER WARRANTYꢀ )F SOꢁ THEY WILL GIVE YOU A 0RODUCT
Return Authorisation number.
s 7E WILL THEN EMAIL OR FAX A 2ETURN !UTHORISATION FORM AND A 2EPAIR .OTICE
(if necessary), together with instructions on how to return the goods for
WARRANTY SERVICEꢀ
0LEASE NOTE THAT IF A #USTOMER 3UPPORT 4EAM MEMBER ADVISES THAT YOUR PRODUCT
does not qualify for return, this warranty does not apply to your product.
Products that are authorised to be returned to Oricom in Australia must include
all of the following:
s ! COMPLETED 2ETURN !UTHORISATION FORM
s ! COPY OF YOUR 0ROOF OF 0URCHASE ꢂPLEASE KEEP YOUR ORIGINAL COPY
s 4HE FAULTY PRODUCTꢁ INCLUDING ALL ACCESSORIESꢁ 3END THE APPROVED RETURNS TOꢓ
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this warranty excludes expenses incurred by you in returning
ANY FAULTY PRODUCT TO USꢀ 9OU MUST ARRANGE AND PAY ANY EXPENSES INCURRED
ꢂINCLUDING POSTAGEꢁ DELIVERYꢁ FREIGHTꢁ TRANSPORTATION OR INSURANCE OF THE PRODUCT
TO RETURN THE FAULTY PRODUCT TO USꢁ HOWEVERꢁ WE WILL ARRANGE DELIVERY OF THE
repaired or replaced faulty product to you.
42 WARRANTY
Important Information
Repair Notice
Please be aware that the repair of your goods may result in the loss of any
user-generated data (such as stored telephone numbers, text messages and
CONTACT INFORMATION ꢀ 0LEASE ENSURE THAT YOU HAVE MADE A COPY OF ANY DATA
SAVED ON YOUR GOODS BEFORE SENDING FOR REPAIRꢀ
Please also be aware that goods presented for repair may be replaced by
refurbished goods or parts of the same type rather than being repaired.
WARRANTY 43
Warranty Information (Australia)
4HIS 7ARRANTY IS PROVIDED BY /RICOM )NTERNATIONAL 0TY ,TD !". ꢒꢋ ꢊꢌꢋ ꢈꢈꢋ ꢉꢋꢍꢁ
5NIT ꢈꢁ ꢒ 3OVEREIGN 0LACEꢁ 3OUTH 7INDSOR .37 ꢇꢎꢏꢋꢁ HEREIN AFTER REFERRED TO
as “Oricom”.
Oricom makes no other warranties or conditions, express or implied, including
AS TO ACCEPTABLE QUALITY AND lTNESS FOR A PARTICULAR PURPOSEꢁ EXCEPT AS STATED IN
this Warranty. Any implied warranties that may be imposed by law are limited in
duration to the Warranty Period.
Oricom warrants that the product is free from defects in materials or
workmanship during the Warranty Period. This Warranty does not extend to any
PRODUCT FROM WHICH THE SERIAL NUMBER HAS BEEN REMOVED OR WAS PURCHASED
outside of Australia.
This warranty in no way affects your statutory warranty rights under the
Competition and Consumer Act 2010 or any other similar legislation.
The Warranty Period will be 3 years from the date of purchase of the product
EVIDENCED BY YOUR DATED SALES RECEIPTꢀ 9OU ARE REQUIRED TO PROVIDE PROOF OF
PURCHASE AS A CONDITION OF RECEIVING WARRANTY SERVICESꢀ
9OU ARE ENTITLED TO A REPLACEMENT PRODUCT OR REPAIR OF THE PRODUCT ACCORDING TO
the terms and conditions of this document if your product is found to be faulty
within the Warranty Period. This Warranty extends to the original purchaser only
and is not transferable. Rechargeable battery cells and rechargeable battery
PACKS ꢂIF SUPPLIED WITH THIS PRODUCT ARE COVERED UNDER THIS WARRANTY FOR A PERIOD
of 90 days.
44 WARRANTY
Products distributed by Oricom are manufactured using new materials or new
AND USED MATERIALS EQUIVALENT TO NEW IN PERFORMANCE AND RELIABILITYꢀ 3PARE PARTS
MAY BE NEW OR EQUIVALENT TO NEWꢀ 3PARE PARTS ARE WARRANTED TO BE FREE FROM
defects in material or workmanship for thirty (30) days or for the remainder of
the Warranty Period of the Oricom branded product in which they are installed,
WHICHEVER IS LONGERꢀ $URING THE 7ARRANTY 0ERIODꢁ /RICOM WILL WHERE POSSIBLE
repair and if not replace the faulty product or part thereof. All component parts
REMOVED UNDER THIS 7ARRANTY BECOME THE PROPERTY OF /RICOMꢀ )N THE UNLIKELY
EVENT THAT YOUR /RICOM PRODUCT HAS A RECURRING FAILUREꢁ /RICOM MAYꢁ SUBJECT TO
THE #OMPETITION AND #ONSUMER !CT ꢇꢊꢈꢊꢁ AT ITS DISCRETIONꢁ ELECT TO PROVIDE YOU
WITH A REPLACEMENT PRODUCT OF ITS CHOOSING THAT IS AT LEAST EQUIVALENT TO YOUR
product in performance.
Oricom does not warrant that the operation of the product will be uninterrupted
or error free.
Oricom is not responsible for damage that occurs as a result of your failure to
follow the instructions that came with the product. These terms and conditions
together with any specific terms and conditions contained in the user guide
TO THE PRODUCT PURCHASED CONSTITUTE THE COMPLETE AND EXCLUSIVE AGREEMENT
between you and Oricom regarding the product.
.O CHANGE TO THE CONDITIONS OF THIS 7ARRANTY IS VALID UNLESS IT IS MADE IN WRITING
AND SIGNED BY AN AUTHORISED REPRESENTATIVE OF /RICOMꢀ
/RICOM WILL NOT BE IN BREACH OF A WARRANTY EXPRESSLY SET OUT IN THIS 5SER 'UIDE
or under the Competition and Consumer Act 2010 and excludes any liability
for damages or any other remedy arising under any other legislation or the
common law if the damage occurs as a result of:
WARRANTY 45
1. failure by you to adhere to the warnings and follow the instructions set out in
this user guide for the proper installation and use of the product;
2. negligence on your part or misuse by you of the product;
3. an uncontrollable external cause which results in the product not functioning
INCLUDING BUT NOT LIMITED TO POWER FAILUREꢁ LIGHTNING OR OVER VOLTAGEꢕ AND
ꢒꢀ MODIlCATION TO THE PRODUCT OR SERVICES CARRIED OUT ON THE PRODUCTION BY ANYONE
OTHER THAN /RICOM OR /RICOMꢄS AUTHORISED SERVICE PROVIDERꢀ
Oricom will not be liable for any damages caused by the product or the failure
OF THE PRODUCT TO PERFORMꢁ INCLUDING ANY LOST PROFITS OR SAVINGS OR SPECIALꢁ
incidental or consequential damages. Oricom is not liable for any claim made by
a third party or made by you on behalf of a third party. This limitation of liability
applies whether damages are sought, or a claim made, under this Warranty or
as a tort claim (including negligence and strict product liability), a contract claim
OR ANY OTHER CLAIMꢀ (OWEVERꢁ THIS LIMITATION OF LIABILITY WILL NOT APPLY TO CLAIMS
FOR PERSONAL INJURYꢀ .OTHING IN THIS 7ARRANTY EXCLUDESꢁ RESTRICTS OR MODIlES ANY
condition, warranty, right or remedy which pursuant to the Competition and
Consumer Act 2010 applies to this Warranty and which may not be so excluded,
restricted or modified. For warranties that cannot be excluded, restricted or
MODIlEDꢁ /RICOM LIMITS THE REMEDIES AVAILABLE TO THOSE SPECIlED IN THE RELEVANT
legislation.
Oricom products come with guarantees that cannot be excluded under the
!USTRALIAN #ONSUMER ,AWꢀ 9OU ARE ENTITLED TO A REPLACEMENT OR REFUND FOR A MAJOR
failure and compensation for any other reasonably foreseeable loss or damage.
9OU ARE ALSO ENTITLED TO HAVE THE GOODS REPAIRED OR REPLACED IF THE GOODS FAIL TO BE
OF ACCEPTABLE QUALITY AND THE FAILURE DOES NOT AMOUNT TO A MAJOR FAILUREꢀ
Contact Details for Oricom support and Warranty claims in Australia
Oricom International Pty Ltd
Locked Bag 658
South Windsor, NSW 2756
Australia
Email: [email protected]
Phone: 1300 889 785
(Monday to Friday 8am to 6pm AEST)
Fax: (02) 4574 8898
Contact details for Oricom Support and Warranty Claims in New Zealand
Email: [email protected]
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Ref: 07092011
|