RP-95028B/N
Revised 09-07
Catalog Section 40
(00-02-0106)
Rack Puller for Diesel Engines
Model RP75
■
Pulls Injection Pump or
Air Intake Shut-off Lever
■
30 lbf (133 N) Operating Force
■
Models Available for 12 or 24 Volt Systems
®
■
Operates on Signal from SWICHGAGE
Installed on the Engine or Driven Equipment
Description
Dimensions
How to Order
The RP75 rack puller is a semi-automatic device
that provides a pulling force to initiate shutdown
of diesel engines and equipment.
Specify model number.
Side View
Wiring
Terminals
Reset Knob
and Stem
RP75 – ____ – ____
Voltage
The RP75 connects to the injection pump or air
intake shut-off lever via a cable (chain optional).
A coil spring, within the RP75, is reset manually
and is held in place by an electromagnet. When
12 = 12 VDC
24 = 24 VDC
Calibration
3-1/4 in.
(83 mm)
5-1/2 in.
(140 mm)
Blank = 4 ft. (1.2 m) cable
8 = 8 ft. (2.4 m) cable
®
the SWICHGAGE detects a malfunction, the
10-1/4 in.
(260 mm)
electromagnetic circuit is interrupted through a
Magnetic Switch–releasing the coil spring thus
pulling the cable/chain to actuate shutdown. The
spring, when fully compressed, exerts a pull of 30
lbf (133 N).
12 = 12 ft. (3.7 m) cable
C = Chain 30 in. (762 mm)
Rear View
Mounting Hole
Dimensions
Service Parts
Mounting
Studs
Specify part number.
The RP75 is available for 12 or 24 VDC applica-
2-3/8 in.
(60 mm)
1/4-20
Part Number
40-00-0021
40-00-0044
40-01-0050
40-01-0053
40-01-0054
Description
®
tions and is compatible with all SWICHGAGE
(4 places)
12 VDC core assembly
Shaft solenoid assembly
Bushing shaft assembly
Case repair kit
instruments.
Specifications
3-3/4 in.
(95 mm)
1-1/4 in.
(32 mm)
Operating Force: 30 lbf (133 N) maximum,
Cocking rod, bushing and
knob repair kit
10 lbf (44 N) minimum.
40-05-0136
40-05-0149
80-04-1030
Spring, main actuating
Spring, cocking rod return
2 Screws, machined #10-24
x 3/8 pan HD steel CAD II
Coil Voltage: Specify 12 or 24 VDC.
Coil Resistance: RP75-12: 32.2 ohms.
RP75-24: 129.8 ohms.
Length of Travel: 1-7/8 in. (48 mm).
Control Linkage
40-00-0024
24 VDC core assembly
•
Cable: 4ft. (1.22 m); Optional 8 ft. (2.43 m)
or 12 ft. (3.65 m) available.
Chain (optional): 30 in. (762 mm).
Warranty
A limited warranty on materials and workmanship
is given with this FW Murphy product. A copy of
the warranty may be viewed or printed by going to
•
NOTE: Specify options when ordering.
Shipping Weight: 5 lbs 3 oz. (2.4 kg).
Shipping Dimensions: 9-1/4 x 8-1/4 x
5-1/4 in. (235 x 210 x 133 mm).
|
Sharp Plasmacluster Air Purifier Replacement Filter Set 74000661776 User Manual
Sanyo 26k72r User Manual
Samsung Aw14p1hba User Manual
HP DESKJET D4360 User Manual
HERTZ HP 6001 User Manual
GARMIN REACTOR 40 KICKER User Manual
ENVISION EN9250 User Manual
DELL AC411 User Manual
CRAFTSMAN 917.204140 User Manual
CRAFTSMAN 351.214600 User Manual