Motorola Mbp8 User Manual

User’s Guide  
MBP8  
Baby Monitor  
The features described in this user's  
guide are subject to modifications  
without prior notice.  
1
Sound Level Indicators  
Overview of your Parent unit  
3 GREEN and 2 RED LEDs indicate the audio level  
being picked up by the microphone of baby unit. The  
more LEDs that light up, the louder the sound is.  
1
If no LED lights up, the sound level in the baby's room  
is below the threshold for the parent unit.  
The LEDs are also used when adjusting the speaker  
volume setting on the parent unit, with more LEDs  
indicating a louder setting, from 0 to 5.  
2
Link Indicator  
On when the parent unit is powered on and linked to  
the baby unit.  
Flashes when the parent unit is out of range of the  
baby unit.  
3
4
5
Power  
Press and hold to power on/off the parent unit.  
2
3
Volume +  
Press to increase the speaker volume.  
Volume -  
Press to decrease the speaker volume.  
5
4
Important guidelines for installing your Baby  
Monitor  
Overview of your Baby unit  
To use your baby unit and parent unit together, you  
must be able to establish a radio link between them,  
and the range will be affected by environmental  
conditions.  
4
Any large metal object, like a refrigerator, a mirror, a  
filing cabinet, metallic doors or reinforced concrete,  
between the baby and parent unit may block the radio  
signal.  
The signal strength may also be reduced by other solid  
structures, like walls, or by radio or electrical  
equipment, such as TVs, computers, cordless or  
mobile phones, fluorescent lights or dimmer switches.  
Use of other wireless products, such as wireless  
networks, Bluetooth systems or microwave ovens may  
cause interference with this product, so keep the baby  
monitor away from these types of products, or turn  
them off if they appear to be causing interference.  
1
2
3
If the signal is poor, try moving the parent and/or the  
baby unit to different positions in the rooms.  
It is recommended to place the baby unit about 1 metre  
from the Cot to ensure sound can be received and  
heard.  
1
2
3
4
Power Indicator 0  
On when the baby unit is switched on.  
It is essential to ensure sufficient clear space around  
the baby unit.  
Power 0  
Press and hold to power on/off the baby unit.  
Nightlight 1  
Press to turn on/off the nightlight.  
Nightlight output  
On when the nightlight is turned on.  
Off when the nightlight is turned off.  
1. SAFETY INSTRUCTIONS ..................................6  
2. GETTING STARTED...........................................7  
3. USING YOUR BABY MONITOR.........................7  
3.1 Power on/off the parent unit..............................7  
3.2 Power on/off the baby unit ................................7  
3.3 Set nightlight .....................................................8  
3.4 Adjust speaker volume......................................8  
4. DISPOSAL OF THE DEVICE  
(ENVIRONMENT)................................................8  
5. CLEANING..........................................................9  
6. TROUBLESHOOTING........................................9  
7. GENERAL INFORMATION...............................10  
8. TECHNICAL SPECIFICATIONS.......................13  
EC DECLARATION OF CONFORMITY ...........14  
5
• This baby monitor is not a substitute for responsible  
adult supervision.  
• Keep this User's Guide for future reference.  
• Do not cover the baby monitor with a towel or blanket.  
Test this monitor and all its functions so that you are  
familiar with it prior to actual use.  
1. SAFETY INSTRUCTIONS  
Presence of un-insulated “dangerous voltage”  
within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of  
electric shock to persons.  
• Do not use the baby monitor near water.  
• Do not install the baby monitor near a heat source.  
CAUTION  
In order to reduce the risk of fire or electrical shock, do not  
expose the device to water or humidity. Never  
disassemble the device. Opening the casing is dangerous  
and will invalidate the warranty.  
WARNING:  
Presence of important operating and maintenance  
(servicing) instructions in the literature  
accompanying the appliance.  
This baby monitor is compliant with all relevant standards  
regarding electromagnetic fields and is, when handled as  
described in the User's Guide, safe to use. Therefore,  
always read the instructions in this User's Guide carefully  
before using the device.  
Main plug is used as disconnect device and it should  
remain readily operable during intended use. In order to  
disconnect the apparatus from the mains completely, the  
mains plug should be disconnected from the mains socket  
outlet completely.  
• The socket outlet shall be installed near the equipment  
and shall be easily accessible.  
• Determine a location for the baby monitor that will  
provide the best audio reception of your baby in his cot.  
• NEVER place the baby monitor within the cot.  
• Adult assembly is required. Keep small parts away  
from children when assembling.  
• This product is not a toy. Don't allow children to play  
with it.  
6
SAFETY INSTRUCTIONS  
2. GETTING STARTED  
3. USING YOUR BABY MONITOR  
Please read these instructions carefully, and be aware  
that this baby monitor is only intended as an aid. It is not  
a substitute for responsible, correct parental supervision.  
Baby monitor power supply  
UK Plug  
Wall Socket  
3.1 Power on/off the parent unit  
1. When the parent unit is off, press and hold 0 until the  
Link Indicator is on. The parent unit is now powered  
on and will search for and link itself to the baby unit.  
2. When the parent unit is on, press and hold 0 until the  
Link Indicator turns off. The parent unit is now  
powered off.  
3.2 Power on/off the baby unit  
When the baby unit is off, press and hold 0 until the  
Power Indicator is on. The baby unit is now powered on.  
When the baby unit is on, press and hold 0 until the  
Power Indicator turns off. The baby unit is now  
powered off.  
1. Choose a proper location with easy access to a mains  
socket.  
NOTE  
2. Plug the baby unit into the mains socket in your  
baby's room. Ensuring sufficient clearance is given for  
it to detect sound and no more than 1 metre from the  
babies cot.  
Do not place the parent and baby units too close together,  
or you may hear a high pitched noise. This is not a fault.  
The units are designed to be operated at some distance  
apart, e.g. in separate rooms.  
3. Plug in the parent unit where you want to monitor your  
baby.  
GETTING STARTED  
7
       
3.3 Set nightlight  
4. DISPOSAL OF THE DEVICE  
(ENVIRONMENT)  
The nightlight feature is for giving the room a soft glow so  
the baby can be observed without disrupting it with bright  
lights.  
At the end of the product lifecycle, you  
should not dispose of this product with  
normal household waste. Take this product  
to a collection point for the recycling of  
electrical and electronic equipment. The  
symbol on the product, user's guide and/or box indicates  
this.  
1. When the nightlight is off, press 1 to turn it on.  
2. When the nightlight is on, press 1 to turn it off.  
3.4 Adjust speaker volume  
There are 6 volume levels on the parent unit, including  
volume off.  
Some of the product materials can be re-used if you take  
them to a recycling point. By reusing some parts or raw  
materials from used products you make an important  
contribution to the protection of the environment.  
Press + to increase or - to decrease the volume of  
the parent unit respectively. The sound level LEDs will  
light up while adjusting the volume, to indicate the set  
level from 0 (off), 1 (quiet) to 5 (loud).  
Please contact your local authorities in case you need  
more information on the collection points in your area.  
Dispose of the battery pack in an environmentally-friendly  
manner according to your local regulations.  
8
DISPOSAL OF THE DEVICE (ENVIRONMENT)  
     
5. CLEANING  
6. TROUBLESHOOTING  
Clean your MBP8 with a slightly damp cloth or with an  
anti-static cloth. Never use cleaning agents or abrasive  
solvents.  
Link light on the parent unit does not come on  
• Check whether the parent unit is powered on.  
Link light on the parent unit flashes  
• The parent unit and the baby unit may be out of range  
with each other. Reduce the distance between the  
units, but not closer than 1.5 metre.  
• The baby unit may be switched off. Press and hold the  
0 key on the baby unit to switch on the baby unit.  
The parent unit beeps  
• Lost connection with the baby unit. Reduce the  
distance between the parent unit and the baby unit, but  
not closer than 1.5 metre.  
• The baby unit may be switched off. Press and hold the  
0 key on the baby unit to switch on the baby unit.  
Cleaning and care  
• Do not clean any part of the product with thinners or  
other solvents and chemicals - this may cause  
permanent damage to the product which is not  
covered by the warranty.  
• Keep your MBP8 away from hot, humid areas or  
strong sunlight, and don't let it get wet.  
• Every effort has been made to ensure high standards  
of reliability for your MBP8. However, if something  
does go wrong, please do not try to repair it yourself -  
contact Customer Service for assistance.  
CLEANING  
9
   
Cannot hear sound or baby cry from the parent unit  
7. GENERAL INFORMATION  
If your product is not working properly...  
1. Read this User's Guide.  
• The volume level in the parent unit may be set too low,  
increase the volume level of the parent unit. Refer to  
section 3.4 for volume level settings.  
2. Contact Customer Service at  
• The parent unit and the baby unit may be out of range  
with each other. Reduce the distance between the  
units, but not closer than 1.5 metre.  
UK  
0845 218 0890  
08187 62092  
ROI  
The baby monitor system produces a high-  
pitched noise  
Consumer Products and Accessories  
• The parent unit and the baby unit are too close to each  
Limited Warranty ("Warranty")  
other. Make sure the parent unit and baby unit are at  
least 1.5 metre away from each other.  
• The speaker volume of the parent unit maybe set too  
high. Decrease the volume of the parent unit.  
Thank you for purchasing this Motorola branded product  
manufactured under license by Binatone Electronics  
International LTD ("BINATONE")  
What Does this Warranty Cover?  
Subject to the exclusions contained below, BINATONE  
warrants that this Motorola branded product ("Product") or  
certified accessory ("Accessory") sold for use with this  
product that it manufactured to be free from defects in  
materials and workmanship under normal consumer  
usage for the period outlined below. This Warranty is your  
exclusive warranty and is not transferable.  
Who is covered?  
This Warranty extends only to the first consumer  
purchaser, and is not transferable.  
10  
GENERAL INFORMATION  
 
FINANCIAL LOSS ARISING OUT OF OR IN  
CONNECTION WITH THE ABILITY OR INABILITY TO  
USE THE PRODUCTS OR ACCESSORIES TO THE FULL  
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY  
LAW.  
What will BINATONE do?  
BINATONE or its authorized distributor at its option and  
within a commercially reasonable time, will at no charge  
repair or replace any Products or Accessories that does  
not conform to this Warranty. We may use functionally  
equivalent reconditioned/ refurbished/ pre-owned or new  
Products, Accessories or parts.  
Some jurisdictions do not allow the limitation or exclusion  
of incidental or consequential damages, or limitation on  
the length of an implied warranty, so the above limitations  
or exclusions may not apply to you. This Warranty gives  
you specific legal rights, and you may also have other  
rights that vary from one jurisdiction to another.  
What Other Limitations Are There?  
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, SHALL BE LIMITED TO THE DURATION OF  
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR  
OR REPLACEMENT PROVIDED UNDER THIS EXPRESS  
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF  
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO  
EVENT SHALL MOTOROLA OR BINATONE BE LIABLE,  
WHETHER IN CONTRACT OR TORT (INCLUDING  
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE  
PURCHASE PRICE OF THE PRODUCT OR  
Products Covered  
Length of Coverage  
Consumer Products One (1) year from the date of the  
products original purchase by the  
first consumer purchaser of the  
product.  
Consumer  
Accessories  
Ninety (90) days from the date of  
the accessories original purchase  
by the first consumer purchaser  
of the product.  
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY  
KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF  
BUSINESS, LOSS OF INFORMATION OR OTHER  
Consumer Products The balance of the original  
and Accessories that warranty or for ninety (90) days  
are Repaired or  
Replaced  
from the date returned to the  
consumer, whichever is longer.  
GENERAL INFORMATION  
11  
Unauthorized Service or Modification. Defects or  
damages resulting from service, testing, adjustment,  
installation, maintenance, alteration, or modification in  
any way by someone other than MOTOROLA,  
BINATONE or its authorized service centers, are  
excluded from coverage.  
Exclusions  
Normal Wear and Tear. Periodic maintenance, repair  
and replacement of parts due to normal wear and tear are  
excluded from coverage.  
Batteries. Only batteries whose fully charged capacity  
falls below 80% of their rated capacity and batteries that  
leak are covered by this Warranty.  
Altered Products. Products or Accessories with (a) serial  
numbers or date tags that have been removed, altered or  
obliterated; (b) broken seals or that show evidence of  
tampering; (c) mismatched board serial numbers; or (d)  
nonconforming or non-Motorola branded housings, or  
parts, are excluded from coverage.  
Abuse & Misuse. Defects or damage that result from: (a)  
improper operation, storage, misuse or abuse, accident or  
neglect, such as physical damage (cracks, scratches,  
etc.) to the surface of the product resulting from misuse;  
(b) contact with liquid, water, rain, extreme humidity or  
heavy perspiration, sand, dirt or the like, extreme heat, or  
food; (c) use of the Products or Accessories for  
commercial purposes or subjecting the Product or  
Accessory to abnormal usage or conditions; or (d) other  
acts which are not the fault of MOTOROLA or  
Communication Services. Defects, damages, or the  
failure of Products or Accessories due to any  
communication service or signal you may subscribe to or  
use with the Products or Accessories is excluded from  
coverage.  
BINATONE, are excluded from coverage.  
How to Obtain Warranty Service or Other  
Information?  
To obtain service or information, please call:  
Use of Non-Motorola branded Products and  
Accessories. Defects or damage that result from the use  
of Non-Motorola branded or certified Products or  
Accessories or other peripheral equipment are excluded  
from coverage.  
UK  
0845 218 0890  
ROI  
08187 62092  
Email:  
12  
GENERAL INFORMATION  
You will receive instructions on how to ship the Products  
or Accessories at your expense and risk, to a BINATONE  
Authorized Repair Center. To obtain service, you must  
include: (a) the Product or Accessory; (b) the original  
proof of purchase (receipt) which includes the date, place  
and seller of the Product; (c) if a warranty card was  
included in your box, a completed warranty card showing  
the serial number of the Product; (d) a written description  
of the problem; and, most importantly; (e) your address  
and telephone number.  
8. TECHNICAL SPECIFICATIONS  
RF frequency band 1881.792 MHz - 1897.344 MHz  
Channels  
10  
Operating  
5ºC - 45ºC  
temperature  
Baby unit voltage  
(Adapter rating)  
Input: 100-240V AC, 50/60Hz,  
150mA; Output: 6V DC, 450mA  
Parent unit voltage Input: 100-240V AC, 50/60Hz,  
(Adapter rating) 150mA; Output: 6V DC, 450mA  
These terms and conditions constitute the complete  
warranty agreement between you and BINATONE  
regarding the Products or Accessories purchased by you,  
and supersede any prior agreement or representations,  
including representations made in any literature  
publications or promotional materials issued by  
BINATONE or representations made by any agent  
employee or staff of BINATONE, that may have been  
made in connection with the said purchase.  
TECHNICAL SPECIFICATIONS  
13  
 
BINATONE TELECOM PLC  
1 Apsley Way London NW2 7HF,United Kingdom.  
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877  
________________________________________  
.
EC Declaration of Conformity  
The product is labelled with the European Approval Marking CE as  
show. Any Unauthorized modification of the product voids this  
Declaration.  
We the manufacturer / Importer : Binatone Telecom Plc  
1 Apsley Way London  
NW2 7HF, United Kingdom.  
Declare under our sole responsibility that the following product  
Type of equipment:  
Model Name:  
Country of Origin:  
Brand:  
Digital Baby Monitor  
MBP 8  
China  
Manufacturer / Importer  
(Signature of authorized person)  
Motorola  
complies with the essential protection requirements of R&TTE  
Directive 1999/5/EC on the approximation of the laws of the Member  
States relating to Radio Spectrum Matters, the Council Directive  
2004/108/EC on the approximation of the laws of the Member States  
relating to electromagnetic compatibility (EMC) and the European  
Community Directive 2006/95/EC relating to Electrical Safety.  
Assessment of compliance of the product with the requirements  
relating to the essential requirements according to Article 3 R&TTE  
was based on Annex III of the Directive 1999/5/EC and the following  
standard:  
London, 25 Jun 11  
Signature: (Paul Tsui/ Product Operation  
Director)  
Place & Date :  
Radio Spectrum:  
EMC:  
EN301406 V2.1.1 (2009-07)  
EN301489-6 V1.3.1 (2008-08)  
EN301489-1 V1.8.1 (2008-04)  
Electrical Safety:  
EN60950-1:2006+A11:2009+A1:2010  
14  
EC DECLARATION OF CONFORMITY  
Manufactured, distributed or sold by Binatone  
Electronics International LTD., official licensee  
for this product. MOTOROLA and the Stylized  
M Logo are trademarks or registered  
trademarks of Motorola Trademark Holdings,  
LLC. and are used under license. All other  
trademarks are the property of their respective  
owners.  
© 2011 Motorola Mobility, Inc. All rights  
reserved.  
Version 1.0  
Printed in China  

Weil Mclain Seer 14 User Manual
Trane Air Conditioner Series R Air Cooled Helical Rotary Liquid Chillers User Manual
Trane Air Conditioner 4ttx5049e1 User Manual
Telex Bc 800nm4 User Manual
Sony Dppsv55 User Manual
Sears 20071224 User Manual
Philips Lr6ps16c User Manual
DENON AVR X5200W User Manual
CRAFTSMAN 351.217430 User Manual
BLACK DECKER CHV1610 User Manual