MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 1
ENGLISH
MCV904 (MCV904-A0P/A0U
MCS904F, MCS904S, MCS904W/ AW)
MCT704 (MCT704-A0P/A0U
MCS704F, MCS704W)
MCD504 (MCD504-A0P/A0U, MCS504F)
As an ENERGY
S
TAR® Partner, LG
has determined that this product
or product models meet the
ENERGY
S
TAR® guidelines for
energy efficiency.
ENERGY STAR® is a U.S. registered mark.
iPhone is a trademark of Apple Inc.
iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 3
There is so much your Hi-Fi system can do
ENGLISH
Contents
Setting up
4
5
6
Main Unit
About Remote control
Listening to CDs
7
7
8
8
Listening to the radio
Listening to cassette tapes
Using an USB device
Put the battery into the remote control
Make sure for the + (plus) and – (minus) on the
battery to be matched on the remote control.
(size AAA)
Listening to music from your portable player
or external device
Enjoying a pre-programmed sound field
PRO EQ
Synchronized Recording from CD to Tape
Recording to TAPE
Recording to USB
Setting the Clock
Using an iPod (optional)
9
9
10
10
10
11
12
13
The making of unauthorized copies of copy-protected
material, including computer programs, files, broadcasts and
sound recordings, may be an infringement of copyrights and
constitute a criminal offense. This equipment should not be
used for such purposes.
Troubleshooting
Specifications
14
15
Be responsible
Respect copyrights
Before connecting, operating or adjusting this product, please read this instruction booklet carefully
and completely.
3
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 4
Setting up
(FM - aerial)
MCV904
MCT704
Using the subwoofer
You can use the sound of the subwoofer to enhance
the bass. Press “SUB WOOFER” on the unit
repeatedly, the display changes in the following
order, SUB_WOOFER ON-SUB_WOOFER OFF.
Connecting to AUDIO OUT
5
You can enjoy music by connecting external device.
4
subwoofer (A)
subwoofer (B)
(AM - aerial)
3
3
1 Connection of the front speakers
Connect the speaker cables to the front speaker
terminals.
MCV904
MCT704/ MCD504
Connect the black end of each wire to the terminals marked -
(minus) and the other end to the terminals marked + (plus).
MCV904
2 Connection of the surround speakers
Connect the speaker cables to the surround speaker terminals.
3 Connection of the subwoofer
Connect the subwoofer(A) cables to the subwoofer terminals.
MCV904
Connect the subwoofer(B) speaker cables to the
MCV904
MCT704
5 Connect the FM aerial
The reception will be at its best when the two loose ends
of the aerial are in a straight line and horizontal.
6 Plug the power plug into a wall socket
subwoofer(A) speaker terminals.
4 Fit the AM loop aerial to its stand
Connect the AM loop aerial to the unit.
NOTES:
• If TV screen becomes discolored do not place speakers
within 30cm from TV.
Be careful of the following
Be careful to make sure children not to put their hands or any objects into the
*speaker duct.
• Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
*speaker duct : A hole for plentiful bass sound on speaker cabinet(enclosure).
4
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 5
Main Unit
1
14
15
1 /] POWER on/off
POWER SAVE MODE
Choose a desired CD
DISPLAY WINDOW
OPEN / CLOSE
You can select the CD function.
1
2
3
4
5
CD/ TAPE Synchronized Recording
Starts playback/ Clock setting/ CD
pause
You can select the TAPE function.
Stops playback or recording
2
3
4
5
16
17
18
R (REC) (USB REC/ TAPE REC)
MIC VOL.
Adjusts the microphone volume by
turning MIC VOL.
6
XDSS
MIC
19
20
Extreme Dynamic Sound System
Reinforce the treble, bass and surround
effect.
You can sing to a music source by
connecting a microphone (not supplied)
to the unit.
12
13
23
24
6
7
8
9
10
11
MP3 OPT.
PORT. IN
25
26
27
Optimizes compressible MP3 files so
that it improves the bass sound.
For connecting a portable device and
playing it through the system’s speakers.
USB port
14
15
16
17
7
8
9
PRO EQ
21
22
To select TUNER function
Connect a USB compatible device
here.
VOCAL FADER
When you listen to music, it reduce
the vocal of file.
Cassette door
18
19
28
23 LG EQ/ DEMO
24
10
You can select the USB (iPod) function.
MCV904
(Optional)/ AM NOISE
MCT704
20
21
SUB WOOFER
11 PORTABLE
The unit can be used to play the music
from many types of portable player.
AUX
PRESET + (CD PLAY, TAPE FWD PLAY)
25
26
PRESET - (TAPE RVS PLAY)
You can connect many other types of
audio or audio visual device to the
system via the auxiliary sockets
(AUX IN) on the back of the unit.
VOLUME
Controls the volume when using any
function.
22
27
TUNING (+) (CD Next/ TAPE FF)
TUNING (-) (CD Prev/ TAPE REW)
12
13
CLOCK
28 PRO EQ
Controls sound register
(Low BASS (100 Hz),
Middle Middle (1 KHz),
Highe TREBLE (10 KHz))
For setting the clock and checking the
time.
→
→
→
TIMER
With the TIMER function you can turn
CD, tape, USB play and TUNER
reception on or off at a desired time.
5
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 6
About Remote control
POWER on/ off
1
POWER SAVE MODE
F (FUNCTION)
EQ
Changes the functions.
Fall asleep while listening to your unit
Press SLEEP one or more times to select
delay time between 10 and 180 minutes,
after the unit will turn off.
SLEEP
INFO
sound quality adjustment.
You can choose sound impressions.
You can select a Natural or Local
Specialization equalizer effect by
using LG EQ.
LG EQ
See information about your music.
MP3/ WMA files often come with tags. The
tag gives the Title, Artist, Album or Time
information.
CD: Listen to your tracks repeatedly
REPEAT/
RANDOM
or randomly.
(MENU)- TAPE: Reverse Mode.
Optional
Selects the radio station.
./>
TUN
Searchs for a section within a track.
Skips Fast backward or Forward.
(+)/(-)
/
B
Starts or pauses playback
Stops playback or recording
[]
x
(ENTER-
Optional)
Selecting the sound system
SURROUND
(Optional)
You can enjoy different sounds by
selecting the sound mode you want.
Press SURROUND repeatedly, the
display changes in the following order.
Searchs for a folder of MP3/ WMA files
When a CD containing MP3/ WMA files in
several folders is being played, press
FOLDER•PRESET selects the folder you
want to play.
v
v
SURROUND 1
→
SURROUND 2
FOLDER
•PRESET
For storing radio stations
PROGRAM/
MEMO.
Choose a ‘preset number’ for a radio
If you have saved radio stations using
PROGRAM/MEMO., you can scroll
through them and select one.
station.
+
Controls the volume when using any function.
VOL
-
Listens to your tracks in any order
Choose a desired CD
D.SKIP
REC
z
Recording button.
Temporarily stop the sound
Press the button again to return to the
sound.
6
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 7
Listening to CDs
Listening to the radio
Audio CD and MP3/ WMA CD can be played back in this unit.
Make sure both the FM and AM aerials are connected.
ON UNIT
ON REMOTE
ON UNIT
ON REMOTE
1. Open the CD door
2. Select the CD tray
3. Insert the CD: Label facing up.
4. Close the CD door
5. Select the CD function
The display will show the total
number of tracks (files).
-
1. Select either FM or AM
2. Select the radio station
TUNER
TUNING (+)/ (-)
-
FUNCTION
TUN.- / TUN.+
PROGRAM/MEMO.
OPEN / CLOSE
DISC SKIP
-
OPEN / CLOSE
CD
D.SKIP
-
-
3. To ‘save’ a radio station: A preset
number will show in the display.
4. Select the preset number
PRESET(-)/ (+) FOLDER • PRESET
PROGRAM/MEMO.
FUNCTION
5. To confirm press: Up to 50 radio
-
stations can be saved.
6. Start the CD playing
7. To stop a CD playing
6. To select a ‘saved’ station
PRESET(-)/ (+) FOLDER • PRESET
/
B
B []
STOP
x (ENTER)
Listening to the radio - More you can do
Listening to CDs - More you can do
Looking for radio stations automatically
Pausing or restarting a CD
1 Press and hold TUNING + / TUNING - on the unit or TUN.- / TUN.+ on the
1 Press CD PAUSE on the unit or
/
on the remote control during playback.
B
[]
2 Press this button again to resume play.
remote control for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Searching for a section within a track
Hold .bb / BB> on the unit or ./> on the remote control during
Deleting all the saved stations
playback and release it at the point you want to listen to.
1 Press and hold PROGRAM/MEMO. on the remote control for two seconds.
Skipping to another track (files)
“ERASE ALL” shows.
Press .bb / BB> on the unit or ./> on the remote control in stop
2 Press PROGRAM/MEMO. on the remote control to erase all the saved sta-
status.
tions.
Program list
Improveing poor AM reception
When receiving the AM broadcast, beat noises may be occur. Press AM NOISE
repeatedly, the display changes in the following order, AM NOISE ON → AM
NOISE OFF.
You can play up to 20 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press PROGRAM/MEMO. on the remote control in stop status.
3 Press .bb / BB> on the unit or ./>on the remote control to select a
track.
Improveing poor FM reception
4 Press PROGRAM/MEMO. again to save and select a next track.
Press
/
(MONO/ST) on the remote control. This will change the tuner
B
[]
5 Press on the unit or
/
on the remote control to play the programmed
B
B
[]
from stereo to mono and usually improve the reception.
music files
.
6 To clear your selection, press STOP (or x (ENTER)), PROGRAM/MEMO.
and then STOP (or x (ENTER)).
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT/RANDOM(MENU) repeatedly. The current (tracks) file will be
played back repeatedly or randomly.
2 To return to normal playback, press REPEAT/RANDOM(MENU) repeatedly to
7
select [Off].
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 8
About MP3/ WMA
Using an USB device
You can enjoy media files saved on an USB device by connecting the
USB device to the USB port of the unit.
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660”
If you want to operate other function, see the CD playback section.
• If you record MP3/WMA files using the software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3 files.
We recommend that you use “Easy-CD Creator”, which creates an ISO 9660 file
system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• Even if the total number of files on the disc has more than 1000, it will only be
shown up to 999.
ON UNIT
-
ON REMOTE
-
1. Connect the USB device to the USB
port of the unit.
2. Select the USB function.
3. Select a file you want to play.
4. Start your media playing.
5. To stop, press
USB
-
FUNCTION
-
/
B
B
[]
Listening to cassette tapes
Cassette tapes can be played back in this unit.
STOP
(CD,TUNER, ...)
x (ENTER)
FUNCTION
6. Before disconnecting the portable USB
device, change to any other function.
ON UNIT
ON REMOTE
1. Open the tape door
2. Insert the tape
3. Close the tape door
4. Select the TAPE function
5. Start the tape playing
6. To stop a tape playing
-
-
-
Z PUSH EJECT
Compatible USB Devices
-
Z PUSH EJECT
TAPE
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
FUNCTION
USB device requirement
/
B
or
b
B
[]
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
x (ENTER)
STOP
Look out for the follows.
Listen to cassette tapes - More you can do
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
Playing Fast backward or Forward
Press .bb / BB> on the unit during playback, or stop, press B at a point
you want.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/ 32) file system is
supported.
• This unit is not supported when the total number of files is 1 000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used as
a storage device.
RVS MODE (Reverse Mode)
You can set the tape to play one side
, both sides one time
or both
sides,
or more times.
, by pressing REPEAT/RANDOM(MENU) on the remote control one
8
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 9
Listening to music from your portable
player or external device
The unit can be used to play the music from many types of portable player or
external device.
Enjoying a pre-programmed sound field
This system has a number of pre-set surround sound fields. You can select a
desired sound mode by using LG EQ/DEMO.
The displayed items for the Equalizer may be different depending on sound
sources and effects.
ON UNIT
ON REMOTE
ON DISPLAY
Description
1. Connect the portable player to the
PORT.IN(PORTABLE. IN) connector of
the unit.
NATURAL
You can enjoy comfortable and natural sound.
Local
Regionally optimized sound effect.(DANGDUT/ ARABIC/
PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SALSA/
SAMBA)
Specialization
equalizer
PORT. IN (PORTABLE IN)
AUTO EQ
PRO EQ
Realizes the sound equalizer that is the most similar to the
genre of which is included in the MP3 ID3 tag of song files.
The program can adjust the bass (100 Hz),
middle (1 KHz) and treble (10 KHz).
Or
POP
This program lends an enthusiastic atmosphere to the
sound, giving you the feeling you are at an actual rock
, pop, jazz or classic concert.
Connect the external device to the
AUX IN connector of the unit.
> If your TV has only one output for
audio(MONO). connect it to the
left(white) audio jack on the unit.
CLASSIC
ROCK
JAZZ
MP3 OPT
This function is optimized for compressible MP3 file. It
improves the bass sound.
VCR, TV, ...
Main unit
XDSS
VIRTUAL
NORMAL(OFF)
Reinforce the treble, bass and surround sound effect.
You can enjoy moe virtual surround sound.
You can enjoy the sound without equalizer effect.
-
-
1
1 /]
2. Turn the power on.
FUNCTION
-
AUX/PORTABLE
3. Select the PORTABLE or AUX function.
4. Turn on the portable player or external
-
device and start it playing.
9
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 10
Recording to TAPE
PRO EQ
You can listen to music with the desired sound effect (BASS (100 Hz),
MIDDLE (1 KHz) and TREBLE (10 KHz)).
You can record a various sound source to TAPE.
ON UNIT
ON REMOTE
ON UNIT
-
-
Z PUSH EJECT
1. Open the tape deck.
1. Select “PRO EQ”
PRO EQ
SET
2. Insert a blank tape and close the door.
-
2. When “PRO EQ” is displayed, press
3. Select a mode in which you want to
FUNCTION
(CD,TUNER, ...)
The “[USER]” icon is displased.
record.
3. Select the sound effect you want among BASS,
MIDDLE or TREBLE: Rotate the sound effect dial -
BASS (100 Hz), MIDDLE (1 KHz) or
BASS (100 Hz),
MIDDLE (1 KHz)
and
/
4. Play back a sound source first.
B
[]
B
R
REC
z
z
5. Press
The display changed in the following
order, “USB REC” <-> “TAPE REC”
(REC)
TREBLE (10 KHz) to adjust sound level
TREBLE (10 KHz)
4. Press
SET
R
6. Press the button once more when
“TAPE REC” is displayed.
Recording starts.
REC
(REC)
VOCAL FADER
You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source.
STOP
x
(ENTER)
7. To stop recording, press
Press the VOCAL FADER, and “FADE ON” will appear in display window.
To cancel it, press VOCAL FADER again.
Synchronized Recording from CD to Tape
ON UNIT
Z PUSH EJECT
ON REMOTE
-
1. Open the tape deck and then insert a
blank tape.
2. Close the door and insert a CD.
3. To select CD function, press
4. Press the button on a stop status to
move to CD synchronizing mode.
Recording automatically starts
-
Z PUSH EJECT
CD
FUNCTION
-
CD SYNC
7 seconds later after “REC” blinks.
5. To stop, press
STOP
x (ENTER)
10
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 11
To select recording bit rate and speed
Recording to USB
You can record a various sound source to USB.
1 Press R (REC) on the player or z REC on the remote control for longer
than 3 seconds.
2 Use .bb / BB> on the player or . / > on the remote control to
select the bit rate.
ON UNIT
ON REMOTE
3 Press R (REC) or z REC again to select the recording speed.
4 Use .bb / BB> or . / > to select a desired recording speed.
X 1 SPEED (96kbps, 128kbps, 192kbps, 256kbps)
- You can listen to music while recording it. (Audio CD Only)
X 2 SPEED (96kbps, 128kbps)
-
-
1. Connect the USB device to the unit.
2. Select a mode in which you want to
(CD,TUNER, ...)
FUNCTION
record.
Play back a sound source first.
- You can just recording the music file. (Audio CD Only)
5 Press R (REC) or z REC to finish the setting.
3. Press
R (REC)
REC
z
The display changed in the following
order.
When you are recording, look out for the following
“USB REC” <-> “TAPE REC”
•
You can check the recording percentage rate for the USB record on the
screen during the recording. (MP3/ WMA CD only)
During recording MP3/ WMA, there is no sound.
When you stop recording during playback, the file that has been recorded at
that time will be stored.(Audio CD only)
Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
Recording through microphones is not available.
If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
For the discs recorded in the format of DTS disc, USB recording is not
supported.
R (REC)
STOP
REC
4. Press the button once more when
“USB REC” is displayed.
Rcording starts.
z
•
•
5. To stop recording, press
x (ENTER)
•
•
•
Recording to USB - More you can do
Recording Music file in disc source to USB
One track recording -
•
•
Multi card reader device or External HDD can not be used for USB
recording.
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
•
•
•
•
•
A file is recoreded by 128Mbyte when you record for a long term.
When you stop recording during playback, the file will not be stored.
In the state CD-G, DTS disc USB record is not operated.
You may not record more than 999files.
All tracks recording -
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
Program list recording -
It’ll be stored as follows.
USB records after creating your own program if you want to record the track
you want. Up to 20 songs can be recorded.
AUDIO CD
The other sources
MP3/ WMA
Pausing recording
During recording, press R (z REC) to pause recording. Press R (z REC) to
continue recording. (Only Radio/ Portable/ AUX)
11
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 12
Fall asleep while listening to your player
1 Press SLEEP repeatedly to select delay time between 10 and 180 minutes,
after the unit will be turned off.
2 To check the remaining time, press SLEEP.
Setting the Clock
ON UNIT
1. Press for at least 2 seconds
CLOCK
2. Choose from either AM 12:00 (for an am and pm
.bb / BB>
DEMO
display) or 0:00 (for a 24 hour display).
1 Press LG EQ/DEMO in power off state to demonstrate the function on display
3. Confirm your selection
4. Select the hours
5. Press
SET
.bb / BB>
SET
window.
2 To cancel it, press 1 /] or this button again.
6. Select the minutes
7. Press
.bb / BB>
SET
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatly until dim off.
Use your player as an alarm clock
1 Press and hold TIMER. Each function, EX) TUNER, CD.... flashes.
2 Press SET when the function you want to be woken by is showing. If you
choose TUNER, “PLAY” and Then “REC” flashes in the display window
alternately.
3 Choose one of them by pressing SET.
4 “ON TIME” will be displayed. Then you can set the time you want the alarm to
go on. Press .bb / BB> to change the hours and minutes and SET to
save.
5 “OFF TIME” will be displayed. Then, you can set the time you want the
function to stop. Press .bb / BB> to change the hours and minutes
and press SET to save.
6 You will be shown the volume (VOL) you want to be woken by. Use
.bb / BB> to change the volume and SET to save. Switch the system
off. The clock icon “
”shows that the alarm is set.
7 When the system is turned off, you can check the time the alarm is set for by
pressing TIMER. You can also turn the alarm on and off by pressing TIMER.
12
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 13
Using the remote control
Using an iPod (optional)
Operations
Pause or restart
Skip or Search
ON UNIT
ON REMOTE
For detail refer to iPod guide.
The advantage of connecting your iPod through
the system’s USB port is that the iPod can be
controlled from the system.
/
B
B []
./ >
REPEAT/MENU
(RANDOM)
.bb / BB>
Moves to the previous menu
-
-
FOLDER •PRESET
Move to a desired item
Choose a item
x ENTER
STOP
iPod station
Compatible iPod
• We recommend installing the latest software version.
• The unit support the models as follows iPod nano 1G, 2G, 3G, 4G/
iPod classic/ iPod 4G, 5G/ iPod touch 2G/ iPhone 3G. For some models, the
unit may not operate depending on the firmware version.
• Depending on your iPod’s software version, it may not be possible to control
your iPod from the player.
ON REMOTE
ON UNIT
-
1. Connect the iPod to the system
with a iPod cable.
-
Your iPod is automatically turned on.
USB
-
2. Select the USB function
“IPOD READY” is displayed and the
information of the connected iPod is
searched.
FUNCTION
• Unsupported iPod models are recognized as an USB device when connected.
Display information
FOLDER •PRESET
3. When “PLAYLISTS” is displayed,
Select the category.
4. Start playback
5. Before disconnecting the iPod,
change to any other function by
pressing
Press INFO on the remote control repeatedly, the display changes in the
following order, Title
→
Artist
→
Album
→
Time information. When “artist/ Album”
/
B
[]
B
does not exist on the connected iPod, “No artist” or “No Album” is displayed on
screen.
FUNCTION
(CD,TUNER, ...)
NOTES :
• It may take from about 5 to 150 seconds for the unit to search the iPod
information and authentication after being connected.
• It is recommended not to change to other functions when “IPOD READY” is
on.
-
6. Remove the iPod
-
Listening to music from your iPod.
• It is recommended not to connect or disconnect iPod when “IPOD READY” is
on.
• Make sure to operate the device after “PLAYLISTS” is displayed on screen.
• iPod does not support recording function when connected.
• Unsupported texts are displayed like “-”.
Operate iPod by using the unit or the remote control after connected to the
unit. When connected, the unit operates as the connected iPod does and
the states like FOLDER •PRESET are changed by the iPod setting.
For “iPod Touch” model, the explanation of some functions may not be
applicable.
13
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 14
Troubleshooting
Symptom
Cause
The power cord is not plugged in.
Correction
Plug in the power cord.
No power.
Check whether electricity failed.
Check the condition by operating
other electronic devices.
General
No sound.
Check whether you select right
function.
Press FUNCTION and check the
selected function.
The unit does not start playback.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
CD
Radio stations cannot be tuned in. The antenna is positioned or
connected poorly.
Connect the antenna securely.
RADIO
TAPE
Unable to record.
Record protect tabs are removed.
Cover holes on back edge of tape
with tap.
The remote control does not work The remote control is too far from the
Operate the remote control within
about 23 ft (7 m).
properly.
unit.
There is an obstacle in the path of the Remove the obstacle.
remote control and the unit.
Remote control
ipod
The battery in the remote control is
exhausted.
Replace the battery with new one.
Check whether the player is connected
to the unit correctly.
iPod does not work.
Connect it to the unit correctly.
POWER SAVE MODE
Press 1/] on the player or
1
on the remote control for
longer than 3 seconds as the device is powered on, you
can move into POWER SAVE MODE. Press again to
cancel.
Designs and specifications are subject to change without notice.
14
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 15
Specifications
Main unit
Refer to main label.
Power supply
Power consumption
Refer to main label.
Net Weight
MCV904
280 x 375 x 410 mm
5 oC to 35 oC
→
7.7 kg/ MCT704
→
6.9 kg/ MCD504
→
6.5 kg
General
External dimensions (WxHxD)
Operating temperature
Operating humidity
5% to 85 %
FM Tuning Range
AM Tuning Range
87.5 - 108.0 MHz or 87.50 - 108.00 MHz
522 - 1620 kHz or 522 - 1710 kHz or 520 - 1710 kHz
Tuner
Output Power
MCV904: Front : 280 W + 280 W, Surround : 140 W + 140 W, Sub Woofer : 180 W + 180 W
MCT704: Front : 280 W + 280 W, Sub Woofer : 180 W
MCD504: Front : 280 W + 280 W
Amplifier
T.H.D
10 %
42 - 20000 Hz
75 dB
40 - 20000Hz
75 dB
80 dB
Frequency Response
Signal-to-noise ratio
Frequency response
Signal-to-noise ratio
Dynamic range
CD
F.F/REW Time
120 sec (C-60)
250 - 8000 Hz
43 dB
45 dB (P/B)/ 45 dB (R/P)
50 dB (MTT-5511)
Frequency Response
Signal to Noise Ratio
Channel Separation
Erase Ratio
Cassette
Speakers
MCS904F/ MCS704F/ MCS504F
MCS904W/ AW/ MCS704W
Speaker Name
Type
MCS904S
2 Way 2 Speaker
16 Ω
140 W
280 W
194 x 374 x 251 mm
3.5 kg
2 Way 2 Speaker
8 Ω
280 W
560 W
270 x 432 x 326 mm
7.7 kg
1 Way 1 Speaker
12 Ω
180 W
360 W
315 x 432 x 356 mm
8.2 kg
Impedance
Input Power
Max. Input Power
Net Dimensions
Net Weight (1EA)
15
MCV904.704.504-A0U_DKENHL 3/18/09 10:00 AM Page 16
P/NO :MFL61543920
|