LG HT903TA User Manual

HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 1  
Model: HT903TA(HT903TA-A2, SH93TA-S/C/W)  
Full HD up-scaling  
(1080p)  
5.1ch ez Set-up  
View Full HD picture quality Listen sound from TV, DVD  
Unique Features  
with simple setup.  
and Digital Device with vivid  
5.1ch mode.  
Go to page 10  
Go to page 15  
USB Direct Recording  
Portable In  
Record music from CD to  
your USB device.  
Listen to music from your  
portable device (MP3,  
Notebook, etc).  
P/NO : MFL42932926  
Go to page 17  
Go to page 17  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 3  
Welcome to your new DVD Receiver  
Contents  
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . .5-6  
What is SIMPLINK?  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
OSD Initial language settings . . . . . . . . . . . . . . . . . . .9  
Initial Setting the Area Code . . . . . . . . . . . . . . . . . . . .9  
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . .9-11  
Setting the sound mode . . . . . . . . . . . . . . . . . . . . . .11  
Displaying Disc Information . . . . . . . . . . . . . . . . . . .12  
Playing a disc or file . . . . . . . . . . . . . . . . . . . . . .12-14  
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . .15  
5.1ch ez Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Listening to music from your USB device . . . . . . . . .16  
Recording music from CD to your USB device . . . . .17  
Listening to music from your portable player . . . . . . .17  
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . .20  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Some functions of this unit are controlled by TV’s remote control when this unit and  
LG TV with SIMPLINK are connected through HDMI connection.  
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop,  
Power Off, etc.  
Refer to the TV owner’s manual for the details of SIMPLINK function.  
LG TV with SIMPLINK function has the logo as shown above.  
Use a higher version cable than 1.2A HDMI cable.  
3
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 4  
Setting up  
The speakers are detached from the speaker stands.  
Connect the red end of each wire to the  
terminals marked +(plus) and the black  
end to the terminals marked - (minus).  
c
Connect the wires to the speakers.  
Connect the other end of each wire to the correct speaker according to  
the colour coding:  
COLOUR SPEAKER  
POSITION  
Grey  
Rear  
Behind you and to your right.  
Assembling the Speakers  
Blue  
Rear  
Behind you and to your left.  
1 Draw the speaker cord through the hole on the speaker.  
Green  
Orange  
Red  
Centre  
Sub Woofer  
Front  
Above screen, directly in front of you.  
2 Attach the speakers to the speaker stands by rotating the screw.  
Attaching the speakers to the DVD receiver  
In front of you, to the right of  
the screen.  
In front of you, to the left of  
the screen.  
a
You will have received six speaker cables.  
Each one is colour-coded by a band near each end and connects one of  
the six speakers to the DVD receiver.  
White  
Front  
To connect the cable to the speakers, press each plastic finger pad to open the  
connection terminals on the base of each speaker. Insert the wire and release  
the finger pad.  
b
Connect the wires to the DVD receiver.  
Match each wire’s coloured band to the same coloured connection termi-  
nal on the rear of the DVD receiver. To connect the cable to the DVD  
receiver, press each plastic finger pad to open the connection terminal.  
Insert the wire and release the finger pad.  
Be careful of the following  
Be careful to make sure children do not put their hands or any objects into the  
*speaker duct.  
*Speaker duct: A hall for plentiful bass sound on speaker cabi-  
net(enclosure).  
Do not fix the speaker cables in the hole on the speakers  
4
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 5  
Hooking up the unit  
a Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.  
Audio In connection  
Video Out connection  
The unit’s Audio jacks are  
colour coded (red for right  
audio and white for left  
audio). If your TV has only  
one input for audio (mono),  
connect it to the left (white)  
audio jack on the unit.  
Connect the VIDEO OUT-  
PUT jack on the unit to the  
corresponding input jack on  
your TV using a Video cable.  
AM/FM connection  
AM - Connect the AM loop  
aerial to the DVD receiver.  
FM - Connect the FM aerial.  
The reception will be its best  
when the two loose ends of  
the aerial are in a straight and  
horizontal line.  
Component Video connection  
Connect the COMPO-  
NENT/PROGRESSIVE  
SCAN OUTPUT jacks on the  
unit to the corresponding  
input jacks on your TV using  
a Y PB PR cable.  
b Plug the power cord into the power source.  
5
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 6  
Hooking up the unit  
Hooking up the unit - more you  
can do  
HDMI Out connection  
Connect the HDMI OUTPUT jack  
on the unit to the HDMI input jack  
on a HDMI compatible TV using a  
HDMI cable.  
Resolution Setting  
You can change the resolution for component video  
and HDMI output.  
To change the resolution using setup menu to select  
the desired resolution - Auto, 480i(576i), 480p(576p),  
720p, 1080i, 1080p.  
Available resolution according to connection  
[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or  
576p)  
[COMPONENT VIDEO OUT]: 480p (or 576p) and 480i  
(or 576i)  
[VIDEO OUT]: 480i (or 576i)  
Notes on HDMI Out connection  
If your TV does not accept your resolution setting,  
abnormal picture appears on the screen.  
Please read owner’s manual for TV, and then set  
the resolution that your TV can accept.  
Use the HDMI cable within 5 meters  
If the volume bar is not displayed on TV screen,  
when you select Simplink to off on TV, restart the  
unit.  
Enjoying audio from an external source  
You can enjoy audio from an external source through  
your unit.  
Press INPUT repeatedly to select the desired input  
source. - AUX, AUX OPT, PORTABLE, USB  
Digital Audio in connection  
Connect the unit’s OPTICAL  
IN jack to the optical out to  
jack on your TV (or Digital  
Devicae etc.)  
6
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 7  
Remote control  
VSM : Press VSM to set the Dolby Pro Logic II or VIRTU-  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
AL sound.  
INPUT : Changes the input source  
PORTABLE, USB  
SLEEP : Sets the System to turn off automatically at a  
specified time. (Dimmer : Dims the LED (Light-emitting  
diode) of front panel by half in power-on status.)  
(
AUX, AUX OPT,  
REPEAT: Repeats a Chapter/ Track/ Title/ all.  
SUBTITLE: During playback ,SUBTITLE repeatedly to  
select a desired subtitle language .  
)
a
b
c
d
0-9 numerical buttons: Selects numbered options in a  
menu.  
POWER: Switches the unit ON or OFF.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ e ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
FUNCTION : Selects the function (DVD/CD FM, AM)  
,
TITLE : If the current DVD title has a menu, the title menu  
appears on the screen. Otherwise, the disc menu may not  
appear.  
TV Control buttons : Controls the TV. (LG TV only)  
PROG./MEMO. : Accesses or removes Program menu.  
CLEAR: Removes a track number on the Program List.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ f ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
ECHO VOL. : Adjusts echo volume.  
MIC VOL. : Adjusts microphone volume.  
VOCAL FADER : You can enjoy the function as karaoke,  
by reducing singer vocal of music in the various source.  
(MP3/WMA/CD/DD etc.) except for Karaoke mode.  
DISPLAY: Accesses On-Screen Display.  
MENU : Accesses the menu on a DVD disc.  
SETUP : Accesses or removes setup menu  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
PRESET(v/V): Selects programme of Radio.  
TUN.(-/+): Tunes in the desired radio station.  
b / B / v / V (left/right/up/down):Used to navigate on-  
screen displays.  
ENTER : Acknowledges menu selection.  
RETURN (O): Press to move back wards in the menu.  
REC (z) : USB Direct Recording  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
STOP (x): Stops playback or recording.  
PLAY (B): Starts playback. Mono/Stereo(St.)  
PAUSE/STEP (X): Pause playback  
SKIP(. / >): Go to next or previous chapter/ track.  
Put the batteries into the remote control  
Make sure that the + (plus) and – (minus) on the batter-  
ies match those on the remote control.  
Controlling the TV.  
You can control the sound level, input source, and  
power switching of LG TVs as well. Hold POWER (TV)  
and press PR (+/–) button repeatedly until the TV turns  
on or off.  
SCAN(bb/BB) : Search backward or forward.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
TVtHT SPK (5.1Ch Ez Set-Up ): Press HT SPK to select  
the AUX OPT directly  
e
f
MUTE : Press MUTE to mute your unit. You can mute your  
unit in order, for example, to answer the telephone.  
VOLUME (+/-) : Adjusts speaker volume.  
EQ : You can choose 6 (or 7) fixed sound impressions.  
7
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 8  
Main Unit  
Open/Close  
Play/Pause, Function  
DVD/CD Disc Drawer  
Press and hold down this button for  
about 3 seconds then press repeat-  
edly to select other function.  
PORT. IN port  
The PORT. In port means you can connect  
an audio device to play trough the surround  
sound speakers.  
Stop  
Tuning (-/+)  
Skip / Search  
USB port  
The USB port allows you can connect a  
memory device to your DVD player.  
VSM  
Selects the Dolby Pro Logic II  
or Virtual sound.  
Power  
Turn the unit on and off.  
MIC 1/MIC 2  
Volume  
Connect a microphone to MIC 1 or MIC 2 to both sockets.  
Control the volume when using any function.  
8
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 9  
Adjust the settings  
OSD Initial language settings  
Before using the unit for the first time, you have to adjust OSD initial  
language  
ON REMOTE  
1 Display setup menu :  
SETUP  
v V  
ON REMOTE  
2 Select a desired option on the first level:  
3 Move to second level:  
1 Turn the power on:  
B
Appear the language list display window  
2 Select the language:  
3 Press:  
POWER  
4 Select a desired option on the second level: v V  
vV b B  
5 Move to third level:  
6 Change the setting:  
B
ENTER  
v V, ENTER  
4 To confirm press:  
b B and ENTER  
Adjust the settings - more you can do  
Initial Setting the Area Code  
Adjust the language settings  
After factory setting ,To set the Area code you have to as below.  
OSD – Select a language for the Setup menu and on-screen display.  
There is displayed as “-” or other error mark on display when you  
change OSD.  
ON REMOTE  
1 Display setup menu:  
SETUP  
- Restart the unit  
- Change function  
- Disconnect and connect USB device.  
2 Select LOCK menu on the first level:  
v V  
3 Move to second level:  
Appears the activated Area code on the  
second level.:  
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle.  
[Original]: Refers to the original language in which the disc was recorded.  
[Others]: To select another language, press number buttons then ENTER to  
enter the corresponding 4-digit number according to the language code list in  
the reference chapter (see page 18). If you make a mistake before pressing  
ENTER, press CLEAR.  
B
B
4 Move to thirdlevel:  
5 Enter the new pass word:  
numerical buttons  
(0-9) and ENTER  
[OFF] (for Disc Subtitle): Turn off Subtitle.  
6 Recheck entered new pass word:  
numerical buttons  
(0-9) and ENTER  
7 Select a code for a geographic area:  
After select,Rating and Passward will be  
activated.(page18)  
vV b B  
8 To confirm press:  
ENTER  
9
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 10  
• If you turn off the TV or disconnect the HDMI cable during playback of the  
device, playback will pause. You have to click on the play button to play back  
again. For some TVs, when you change the TV mode, such condition speci-  
fied above may happen.  
Adjust the display settings  
TV Aspect – Select which screen aspect to use based on the shape of your TV  
screen.  
[4:3]: Select when a standard 4:3 TV is connected.  
[16:9]: Select when a 16:9 wide TV is connected.  
Adjust the audio settings  
Display Mode – If you selected 4:3, you’ll need to define how you would like  
widescreen programs and films to be displayed on your TV screen.  
[Letterbox]: This displays a widescreen picture with black bands at the top  
and bottom of the screen.  
5.1 Speaker Setup - Adjust 5.1 Speaker Setup menu for amplifier’s output.  
[Speaker]: Select a speaker that you want to adjust.  
[Size]: Since the speaker settings are fixed, you cannot change the settings.  
[Volume]: Adjust the output level of the selected speaker. (-5dB ~ 5dB)  
[Distance]: If you connected speakers to your DVD/CD Receiver, setting the  
Distance lets the speakers know how far the sound has to travel to reach  
your set listening point. This allows the sound from each speaker to reach  
the listener at the same time.  
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.  
Video Resolution - Use vV to select the desired resolution then press ENTER  
to confirm your selection.  
You can set 1080p video resolution to enjoy Full HD picture quality.  
(Full HD up-scaling)  
Press b / B to adjust the Distance of the selected speaker. (You can’t adjust  
front / Woofer speakers)  
The number in 480p (or 576p), 720p, 1080p and 1080i indicates the number of  
lines of video. The “i” and “p” indicate interlaced and progressive scan, respec-  
tively.  
[Test]: Press b / B to test the signals of each speaker. Adjust the volume to  
match the volume of test signals memorized in the system.  
DRC (Dynamic Range Control) – Make the sound clear when the volume is  
[Auto] If your HDMI jack is connected to TVs providing display information  
(EDID), automatically selects the resolution best suited to the connected TV  
(1080p, 1080i, 720p or 480p (or 576p)). (only for HDMI connection)  
[1080p] Outputs 1080 lines of progressive video. (only for HDMI connection)  
[1080i] Outputs 1080 lines of interlaced video.(only for HDMI connection)  
[720p] Outputs 720 lines of progressive video.(only for HDMI connection)  
[480p (or 576p)] Outputs 480 (or 576) lines of progressive video.  
[480i (or 576i)] Outputs 480 (or 576) lines of interlaced video.  
turned down (Dolby Digital only). Set to [On] for this effect.  
Vocal – Select [On] to mix karaoke channels into normal stereo. This function is  
effective for multi-channel karaoke DVDs only.  
HD AV Sync - Sometimes Digital TV encounters a delay between picture and  
sound. If this happens you can compensate by setting a delay on the sound so  
that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use vV  
to scroll up and down through the delay amount, which you can set at anything  
between 0 and 300m sec.  
Notes on Video Resolution  
• Only resolutions supported by the TV are available.  
• Depending on your TV, certain HDMI output resolutions may not work.  
• If your TV does not accept your resolution setting, an abnormal picture  
appears on the screen. Please read TV’s owner’s manual then set the resolu-  
tion that your TV can accept.  
The delay will vary depending on which digital TV channel you are on. If you  
change channel you may need to readjust the HD AV Sync.  
• If the HDMI jack is connected for TVs providing display information (EDID),  
you can not select resolutions that the TV does not accept.  
• If the picture does not appear on the screen, change the TV’s input source.  
10  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 11  
Adjust the lock settings  
Setting the sound mode  
VSM (VIRTUAL SOUND MATRIX) and Dolby Pro Logic II  
To access the lock options, you must enter the 4-digit password. If you have not  
yet entered a password you are prompted to do so. Enter a 4-digit password.  
Enter it again to verify. If you make a mistake while entering number, press  
CLEAR to delete numbers.  
You can select the Dolby Pro Logic II or Virtual sound. Press VSM to set the vir-  
tual sound or to change sound mode repeatedly.  
If you forget your password you can reset it. Press SETUP to display the Setup  
menu. Input ‘210499’ and press ENTER. The password has now been cleared.  
[BYPASS] mode : Software with multichannel surround audio signals is played  
according to the way it was recorded.  
Rating – Select a rating level. The lower the level, the stricter the rating. Select  
[Unlock] to deactivate the rating.  
2Ch source  
[PL II MOVIE] mode: The Movie mode is for use with stereo television shows  
and all programs encoded in Dolby Surround. The result is enhanced sound  
field directionality that approaches the quality of discrete 5.1-channel sound.  
[PL II MUSIC] mode: The Music mode is for use with any stereo music  
recordings.  
Password – Sets or changes the password for lock settings.  
[New]: Enter a new 4-digit password using the numerical buttons then press  
ENTER. Enter the password again to confirm.  
[Change]: Enter the new password twice after entering the current password.  
[PL II MATRIX] mode: The Matrix mode is the same as the Music mode  
except that the directional enhancement logic is turned off. It may be used to  
enhance mono signals by making them seem “larger.” The Matrix mode may  
also find use in auto systems, where the fluctuations from poor FM stereo  
reception can otherwise cause disturbing surround signals from a logic  
decoder. The ultimate “cure” for poor FM stereo reception may be simply to  
force the audio to mono.  
Area code – Select a code for a geographic area as the playback rating level.  
This determines which area’s standards are used to rate DVDs controlled by the  
parental lock. See the Area Codes on page 18.  
Adjust the others settings  
PBC (Playback Control) – Playback control provides special navigation fea-  
tures that are available on some Video CDs. Select [On] to use this feature.  
[ON STAGE] mode: Simulates a large Concert hall  
DivX(R) Registration – We provide you with the DivX® VOD (Video On  
Demand) registration code that allows you to rent and purchase videos using  
the DivX® VOD service.  
Press ENTER when [Select] icon is highlighted and you can view the registra-  
tion code of the unit.  
[VIRTUAL] mode: Realtime 3D positioned sound rendering technology  
with stereo sources, optimized for stereo speakers. Listeners may expe-  
rience amazing virtual surround effects with their own multimedia play-  
ers.  
5.1Ch source  
[VIRTUAL] mode: The Multichannel sound changes the sound in 5.1 ch  
into a virtual one in the 10.1 ch so that it provides such a feeling that  
you listen to the sound simultaneously from the right and left speakers  
and center speaker.  
Semi Karaoke – When a chapter / title / track is fully finished ,this function  
shows the score in the screen with a fanfare sound.  
Available discs for the Semi Karaoke function: DVD discs / DVD Karaoke Discs  
/ VCD discs with more than 2 tracks  
[On]: When you finished singing a score will appear on the screen.  
[Off]: Fanfare and score do not appears on the screen.  
Set a pre-programmed sound field  
This system has a number of pre-set surround sound fields. Select the one  
which best suits the programme you are watching by pressing EQ repeatedly to  
cycle through the options: NORMAL, NATURAL, AUTO EQ, POP, CLASSIC,  
ROCK, JAZZ  
- DVD ,DVD Karaoke ,VCD discs with more than 2 tracks  
- This function operate on the DVD/CD mode.  
- The Semi Karaoke function is available only when a microphone is connected.  
- When you watching movies, “off ” the Semi Karaoke at the SETUP menu or  
enjoy it without connecting the MIC if the fanfare or score appears during  
changing a chapter.  
[AUTO EQ]: AUTO EQ operates only in the MP3/ WMA files which include  
the information. (ID3 Tag is operated ver.1 only.) WMA file operates to Normal  
EQ regardless of Tag information.  
Bit Rate – You can set the quality of the recorded file.  
11  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 12  
Displaying Disc Information  
Playing a Disc or file  
ON REMOTE  
ON REMOTE  
1 Open the disc tray: (On unit: Z)  
2 Insert a Disc: (On unit)  
-
-
-
1 Press DISPLAY:  
DISPLAY  
v V  
2 Select a item:  
3 Close the disc tray: (On unit: Z)  
3 Adjust the Display menu settings:  
4 To return the exit:  
b B  
4 Adjust the menu settings:  
or Select a file from the menu:  
vV b B  
v V  
DISPLAY  
5 Start the Disc playing:  
B
PLAY  
STOP  
Displaying Disc Information - more you can do  
You can select an item by pressing vV and change or select the setting by  
6 To stop the Disc playing:  
x
pressing b B.  
Playing a Disc or file - more you can do  
1/6  
Current title (or track)  
number/total number of titles (or tracks)  
Current chapter number/total number of chapters  
DVD  
VCD  
Playing a DVD or Video CD that has a menu  
4/26  
Most DVD or Video CD now have menus which load first before the film begins  
to play. You can navigate these menus using vV b B to highlight an option.  
Press ENTER to select.  
Elapsed playing time  
Selected audio language or channel  
1
ENG  
D
3/2.1CH  
1
KOR  
1/3  
Selected subtitle  
Selected angle/total number of angles  
ALL  
Skip to the next/previous chapter/track  
Press SKIP (>) to move to the next chapter/track.  
Press SKIP (.) to return to the beginning of the current chapter/track.  
Press SKIP (.) twice briefly to step back to the previous chapter/track.  
Selected sound mode  
Symbol Used in this Manual  
ALL  
Pause playback  
ALL  
MP3  
WMA  
DivX  
Press PAUSE/STEP (X) to pause playback. Press PLAY (B) to continue play-  
back.  
All discs and file listed below  
DVD and finalized DVD R/RW  
Video CDs  
MP3 files  
DVD  
VCD  
ACD  
WMA files  
DivX files  
DVD  
DivX  
VCD  
Frame-by-Frame playback  
Press PAUSE/STEP (X) repeatedly to play title Frame-by-Frame.  
Audio CDs  
ALL  
Playing repeatedly  
Press REPEAT repeatedly to select an item to be repeated. The current title,  
chapter or track will be played back repeatedly. To return to normal playback,  
press REPEAT repeatedly to select [OFF]. This function does not operate dur-  
ing Video CD playback, change the PBC to OFF on setup menu.  
12  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 13  
ALL  
Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG  
Fast forward or fast reverse  
When playing a disc or USB Flash Drive containing with DivX, MP3/WMA and  
JPEG files together, you can select which menu of files you would like to play  
by pressing TITLE  
Press SCAN (m or M) to play fast forward or fast reverse during playback.  
You can change the playback speed by pressing SCAN (m or M) repeated-  
ly. Press PLAY (B) to continue play at normal speed.  
®
DVD  
DivX  
Selecting a subtitle language  
DivX  
Changing the character set to display DivX subtitle correctly  
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle  
language.  
If the subtitle does not display properly during playback, press and hold SUBTI-  
TLE for about 3 seconds then press SUBTITLE to select another language  
code until the subtitle is displayed properly  
DVD  
VCD  
Slow down the playing speed  
DivX  
DivX file requirement  
While playback is paused, press SCAN (bb or BB) to slow down forward or  
reverse playback. You can change the various playback speed by pressing  
SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal  
speed. The video CD cannot be slow down reverse playback.  
DivX disc compatibility with this player is limited as follows:  
Available resolution size: 800x600 (W x H) pixel  
The file name of the DivX subtitle is available by 45 characters.  
If there is impossible code to express in the DivX file, it may be displayed as  
" _ " mark on the display.  
DVD  
VCD  
ACD  
MP3  
WMA  
Watch and listen 1.5 times faster  
Press PLAY when a DVD is already playing to watch and listen to a DVD 1.5  
times faster than normal playback speed. B x1.5 will appear in the top right cor-  
ner of the screen. Press PLAY again to return to normal playback speed.  
If the number of the screen frame is over 30 per 1 second, this unit may not  
operate normally.  
If the video and audio structure of recorded files are not interleaved, either  
video or audio is outputted.  
If the name of movie file is different from that of the subtitle file,during play-  
back of a DivX file, subtitle may not be display..  
DVD  
Viewing the Title menu  
Press TITLE to display the disc's title menu, if available.  
MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”  
DVD  
Viewing the DVD MENU  
Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi),  
SubStation Alpha(.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub)  
SubViewer 2.0 (.sub/.txt), TMPlayer(.txt), DVD Subtitle System(.txt)  
(Files (VobSub(.sub)) included with USB device is not supported)  
Playable Codec format: “DIVX3.xx”, “DIVX4.xx “, “DIVX5.xx”, “MP43”, “3IVX”  
Playable Audio format: “AC3”, “DTS”, “PCM”, “MP3”, “WMA”  
Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)  
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)  
CD-R/RW, DVD R/RW Format: ISO 9660  
Press MENU to display the disc menu, if available.  
DVD  
DivX  
VCD  
Starting play from selected time  
Searches for the starting point of entered time code. Press DISPLAY during  
playback and select the time clock icon. Input the required start time in hours,  
minutes, and seconds, and press ENTER. If you enter the wrong number, press  
CLEAR to enter again.  
DVD  
Last Scene Memory  
Maximum Files/Disc: Less than 999 (total number of files and folders)  
This unit memorizes the last scene from the last disc that is viewed. The last  
scene remains in memory even if you remove the disc from the player or switch  
off(Stand-by mode) the unit. If you load a disc that has the scene memorized,  
the scene is automatically recalled.  
13  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 14  
ACD  
MP3  
WMA  
Creating your own program  
Viewing photo files  
You can play the contents of a disc in the order you want by arranging the order  
of the music files on the disc. The program is cleared when the disc is removed.  
ON REMOTE  
Select a desired music file then press PROG./MEMO. or select “  
press ENTER to add the music file to the program list. To add all music files on  
the disc, select “ ” and then press ENTER. Select a music file from the pro-  
“ and then  
1 Open the disc tray: (On unit: Z)  
2 Insert a disc: (On unit)  
-
-
gram list then press ENTER to start programmed playback.To clear a music file  
from the program list, select the music file you want to clear then press CLEAR  
3 Close the disc tray: (On unit: Z)  
4 Select a photo file:  
-
v V  
or select “  
program list, select "  
icon and then press ENTER. To clear all music files from the  
5 Display the selected file in full screen:  
6 To return to the menu:  
ENTER  
" then press ENTER.  
x
STOP  
MP3  
Displaying file information (ID3 TAG )  
While playing an MP3 file containing file information, you can display the infor-  
mation by pressing DISPLAY repeatedly.  
Viewing photo files - more you can do  
Viewing photo files as a slide show  
MP3/WMA music file requirement  
MP3/WMA compatibility with this unit is limited as follows:  
• File extensions: “.mp3”, “.wma”.  
Use vV b B to highlight (  
You can change slide show speed using b B when (  
) icon then press ENTER to start slide show.  
) icon is highlighted.  
• Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA)  
• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)  
• CD-R/RW, DVD R/RW Format: ISO 9660  
Skip to the next/previous photo  
Press SKIP (. or >) to view the previous/next photo.  
• Maximum Files/Disc: Less than 999 (total number of files and folders)  
Rotate a photo  
Screen Saver  
Use vV b B to rotate the photo in full screen mode.  
The screen saver appears when you leave the unit in Stop mode for about five  
minutes.  
Pause a slide show  
Press PAUSE/STEP (X) to pause a slide show. Press PLAY (B) to continue the  
slide show.  
System Select  
You must select the appropriate system mode for your TV system. If “NO DISC”  
appears in the display window, press and hold PAUSE/STEP (X) for more than  
five seconds to be able to select a system  
Photo file requirement  
JPEG file compatibility with this unit is limited as follows:  
• File extensions: “.jpg”  
• Photo size: Less than 2MB recommended  
• CD-R/RW, DVD R/RW Format: ISO 9660  
• Maximum Files/Disc: Less than 999 (total number of files and folders)  
VOCAL FADER  
You can enjoy the function as karaoke, by rducing singer vocal of music in the  
various source.( MP3/WMA/CD/ DTS/DD etc.) except for Karaoke mode.  
- This function available to use only when a microphone is connected.  
Press VOCAL FADER button then you can see “FADE ON”or “FADE OFF” on  
the front display.  
- This function supports for 2 channel or more.  
14  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 15  
5.1ch ez Set-up  
Listening to the radio  
Be sure that both FM and AM aerials are connected.  
Listen to sound from TV, DVD and Digital Device with vivid 5.1ch mode.  
Even in power off mode, if you press TVtHT SPK, then power is on and  
automatically changed to AUX OPT mode.  
ON REMOTE  
1 Turn the power on:  
POWER  
FUNCTION  
TUN-/+  
2 Select either FM or AM:  
3 Select a radio station:  
4 To ‘save’ a radio station:  
A preset number will show in the display.  
PROG/MEMO.  
5 To select a ‘saved’ station input the preset  
number:  
Up to 50 radio stations can be saved.  
PRESET v/V  
6 To confirm press:  
PROG/MEMO.  
ON REMOTE  
1 Connect the unit’s OPTICAL IN jack to jack on  
optical out of your TV (or Digital Device etc.).:  
Listening to the radio - more you can do  
-
Look for radio stations automatically  
2 Select the AUX OPT:  
To select the AUX OPT directly  
TV  
-
tHT SPK  
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan auto-  
matically and stop when it finds a radio station.  
3 Listen sound with 5.1ch speaker.:  
4 To escape from AUX OPT:  
Choose a preset number for a radio station  
FUNCTION or INPUT  
When storing a radio station, the preset number can be chosen. When the play-  
er automatically shows a preset number, press PRESET v/V to change it.  
Press PROG./MEMO. to save your chosen number.  
Delete all the saved stations  
Press and hold PROG./MEMO for two seconds. ERASE ALL will flash up on the  
DVD receiver display. Press PROG./MEMO. to erase all saved radio stations.  
Improve poor FM reception  
Press PLAY (B) (MONO/ST). This will change the tuner from stereo to mono  
and usually improve the reception.  
15  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 16  
Listening to music from your USB device -  
more you can do  
Listening to music from your  
USB device  
The advantage of connecting your portable USB player through the sys-  
tem’s USB port is that the USB device can be controlled from the system.  
Compatible USB Devices  
Devices which require additional program installation when you have con-  
nected it to a computer, are not supported.  
MP3 Player : Flash type MP3 player.  
The MP3 player requiring installation of a driver is not supported.  
USB Flash Drive : Devices that support USB2.0 or USB1.1. (In case USB 2.0  
is inserted in the the player, if operates at the same speed  
as that of USB 1.1)  
USB device requirement  
Do not extract the USB device while in operation.  
To prevent data loss, back up all data.  
If you use a USB extension cable or USB hub, the USB device might not be  
recognized.  
A device using NTFS file system is not supported. (Only FAT (16/32) file sys-  
tem is supported.)  
ON REMOTE  
The USB function of this unit does not support all USB devices.  
Digital camera and mobile phone are not supported.  
This unit is not supported when the total number of files is 1000 or more.  
If the connected USB device has two or more folders, a drive folder is dis-  
played on the screen. If you want to move to the previous menu after you  
select a folder, press RETURN.  
1 Connect the USB device to the unit  
using a USB cable (not supplied).:  
-
2 Select the USB function:  
INPUT  
v V  
B
3 Select a file from the menu:  
4 Start your music playing:  
5 Before disconnecting the portable USB  
device, change to any other function by  
pressing:  
FUNCTION or INPUT  
-
6 Remove the USB device:  
16  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 17  
If the USB can not record appears “NO USB”.“ERROR”,“USB FULL” ,  
“NO REC” on the display window.  
File will be stored to CD_REC folder in a format “TRK-001.mp3”.  
In the state CD-G ,DTS disc USB Record is not operated.  
If you record more 999 files on CD_REC folder appears “ERROR” on the  
display.  
New files are numbered in numeric sequence. if the total number of the files  
are more than 999, delete some or store some in PC.  
External HDD,Card reader, Locked device and MP3 player is not supported.  
Recording music from CD to  
your USB device  
ON REMOTE  
1 Connect the USB device to the unit:  
-
2 Select a mode (DVD/CD) in which you want  
to record:  
FUNCTION  
The making of unauthorized copies of copy-protected material, including  
computer programs, files, broadcasts and sound recordings, may be an  
infringement of copyrights and constitute a criminal offense. This equip-  
ment should not be used for such purposes.  
3 Start the recording:  
z
If you want to record desired music file in  
Disc to USB. Select a file after start the  
recording:  
v V and z  
Be responsible Respect copyrights  
4 To stop a recording:  
x
STOP  
Listening to music from your  
portable player  
The player can be used to play the music from many types of portable  
player  
Recording music from CD to your USB  
device - more you can do  
Record Audio CD source to USB  
One track recording - If the USB recording is played during playback of the  
CD, the only track would be recording into the USB  
All track recording - If the REC button is pressed at the CD stop, all track  
would be recording.  
Program list recording - USB Records after selecting the tracks pressing the  
PROG./MEMO. button if you want to record the track you want.  
When you are recording, look out for the following  
When you start the USB direct recording ,you can check the Recording per-  
centage rate for the USB record on the display window during the recording.  
During the recording is no sound and not operate for volume .  
When you stop recording during playback ,the file that has been recorded at  
that time will be stored  
ON REMOTE  
If you disconnect the USB without STOP button while recording ,the file can  
not delete in the PC.  
It is impossible to record from “ MIC IN”  
Playable USB REC. Bit rate : 96/128kbps (Refer to the SET UP page)  
During USB record can not operate Pause key for Audio CD only.  
Card reader device can not be use for USB record.  
USB port of the unit can not be connected to PC. The unit can not be used  
as a storage device.  
1 Connect the portable player by plugging the  
unit into PORT. IN on the front of the player.:  
-
2 Turn the power on:  
POWER  
INPUT  
3 Select the PORTABLE function:  
4 Turn the portable player on and start it  
playing:  
-
17  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 18  
Language Codes  
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Code  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
9072  
Language  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Code  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
Language  
Hausa  
Hebrew  
Hindi  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Code  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
Language  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Sindhi  
Singhalese  
Slovak  
Slovenian  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Code  
8185  
Language  
Tajik  
Tamil  
Telugu  
Thai  
Tonga  
Turkish  
Turkmen  
Twi  
Code  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
Italian  
Ukrainian  
Urdu  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Korean  
Kurdish  
Laothian  
Latin  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Latvian, Lettish  
Area Codes  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
El Salvador  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Code  
Area  
Code  
Area  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
Oman  
Pakistan  
Panama  
Code  
Area  
Code  
Area  
Code  
LK  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
ET  
FJ  
Greenland  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
Malaysia  
GL  
HK  
HU  
IN  
ID  
IL  
MV  
MX  
MC  
MN  
MA  
NP  
NL  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
PY  
PH  
PL  
PT  
RO  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
BE  
BT  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
IT  
SA  
SN  
SG  
SK  
SI  
ZA  
KR  
ES  
Uganda  
Ukraine  
Brazil  
JM  
JP  
KE  
KW  
LY  
LU  
MY  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
NZ  
NG  
NO  
OM  
PK  
PA  
United States  
Uruguay  
Uzbekistan  
Vietnam  
Zimbabwe  
FI  
FR  
DE  
GB  
GR  
18  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 19  
Troubleshooting  
CAUSE  
CORRECTION  
PROBLEM  
No power  
No picture  
Plug the power cord into the wall outlet securely.  
Select the appropriate video input mode on the TV so the pic-  
ture from the DVD Receiver appears on the TV screen.  
Connect the video cables securely to both the TV and DVD  
Receiver.  
The power cord is disconnected.  
The TV is not set to receive the DVD signal.  
The video cables are not connected securely.  
Select the correct input mode of the audio receiver so you can  
hear the sound from the DVD receiver.  
Connect the audio cables into the connection terminals cor-  
rectly.  
There is little or no sound  
Equipment connected via the audio cable is not set to  
receive DVD signal output.  
The audio cables are not connected to the speakers or  
receiver securely.  
Replace with a new audio cable.  
Clean the disc using a soft cloth with outward strokes.  
Insert a disc  
The audio cables are damaged.  
The disc is dirty.  
No disc is inserted.  
The DVD picture quality is poor  
A DVD/CD will not play  
Insert a playable disc (check the disc type, colour system  
and regional code).  
An unplayable disc is inserted.  
Place the disc with the label or printed side facing  
upwards.  
The disc is inserted upside down.  
Press SETUP to close the menu screen.  
Enter your password or change the rating level.  
The menu is open on screen.  
There is a parental lock which prevents the playback of DVDs  
with a certain rating.  
Clean the disc using a soft cloth with outward strokes.  
Move DVD receiver and audio components further away from  
your TV.  
Humming noise heard while a  
DVD or CD is playing  
The disc is dirty.  
The DVD receiver is located too close to the TV, causing feed-  
back.  
Check the antenna connection and adjust its position.  
Attach an external aerial if necessary.  
Radio stations can’t be tuned in  
properly  
The antenna is positioned or connected poorly.  
Tune to the station manually.  
Preset some radio stations, see page 15 for details.  
The signal strength of the radio station is too weak.  
No stations have been preset or preset stations have  
been.cleared(when tuning by scanning preset channels).  
The remote is not pointed directly at the DVD receiver.  
The remote is too far from the DVD receiver.  
There is an obstacle in the path between the remote control  
and the unit.  
The remote control doesn’t  
work well / at all  
Point the remote directly at the unit.  
Use the remote within 23 feet (7m) of the DVD receiver.  
Remove the obstacle.  
Replace the batteries with new ones.  
The batteries in the remote control are flat.  
19  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 20  
About the  
Symbol Display  
Types of Playable Discs  
” may appear on your TV display during operation and indicates that the  
Logo  
Type  
function explained in this owner’s manual is not available on that specific DVD  
video disc.  
DVD-VIDEO: Discs such as movies that can  
be purchased or rented.  
Regional Codes  
DVD-R: Video mode and finalized only  
This unit has a regional code printed on the rear of the unit. This unit can play  
only DVD discs labeled same as the rear of the unit or “ALL”.  
DVD-RW: Video mode and finalized only  
DVD VR format that have been finalized can not be  
played in this unit  
Most DVD discs have a globe with one or more numbers in it clearly visible  
on the cover. This number must match your unit’s regional code or the disc  
cannot play.  
If you try to play a DVD with a different regional code from your player, the  
message “Check Regional Code” appears on the TV screen.  
DVD+R: Video mode only  
Supports the double layer disc also  
Copyrights  
DVD+RW: Video mode only  
Video CD (VCD/SVCD):  
Audio CD:  
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in  
public, or rent copyrighted material without permission. This product features  
the copy protection function developed by Macrovision. Copy protection signals  
are recorded on some discs. When recording and playing the pictures of these  
discs picture noise will appear. This product incorporates copyright protection  
technology that is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology must be authorized by  
Macrovision Corporation, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
This unit plays DVD R/RW and CD-R/RW that contains audio titles,  
DivX, MP3,WMA and/or JPEG files. Some DVD RW/DVD R or CD-  
RW/CD-R cannot be played on this unit due to the recording quality or  
physical condition of the disc, or the characteristics of the recording  
device and authoring software.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-  
SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525  
OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMEND-  
ED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD  
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE  
CONTACT OUR CUSTOMER SERVICE CENTER.  
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby  
Laboratories.  
Manufactured under license from Dolby Laboratories.  
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674;  
5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued &  
pending. DTS and DTS Digital Surround are registered trademarks and the  
DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All  
Rights Reserved.  
You have to set the disc format option to [Mastered] in order to make the discs  
compatible with the LG players when formatting rewritable discs. When setting  
the option to Live File System, you cannot use it on LG players.  
(Mastered/Live File System : Disc format system for Windows Vista)  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trade-  
marks or registered trademarks of HDMI licensing LLC.  
20  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 21  
Specifications  
General  
Power supply  
Power consumption  
Net Weight  
Refer to main label.  
Refer to main label.  
3.9 kg  
External dimensions (W x H x D)  
Operating conditions Temperature  
430 x 73 x 305 mm  
5°C to 35°C,  
Operation status: Horizontal  
5% to 85%  
Semiconductor laser,  
wavelength 650 nm  
Operating humidity  
Laser  
Tuner FM/AM [MW]  
FM Tuning Range  
FM Intermediate Frequency  
AM Tuning Range  
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz  
10.7 MHz  
522 - 1,620 kHz or 520 - 1,720 kHz  
AM Intermediate Frequency 450 kHz  
Amplifier  
Stereo mode  
155 W + 155 W (4at 1 kHz, THD 10 %)  
Surround mode Front:  
155 W + 155 W (THD 10 %) C e n t e r * : 155 W  
Surround*: 155 W + 155 W  
(4at 1 kHz, THD 10 %)  
Subwoofer*: 225 W (3at 30 Hz, THD 10 %)  
Speakers  
Front/Rear  
Speaker  
Center  
speaker  
Passive  
Subwoofer  
Type  
2 Way 3 Speaker 2 Way 3 Speaker 1Way1Speaker  
Impedance  
4 Ω  
4 Ω  
3 Ω  
Rated Input Power  
Max. Input Power  
155 W  
310 W  
155 W  
310 W  
225 W  
450 W  
Net Dimensions (W x H x D) 280 x 1200 x 280 mm 330 x 110 x 95 mm 182 x 416 x 414 mm  
Net Weight 4.5 kg 1.6 kg 8.2 kg  
Designs and specifications are subject to change without  
prior notice.  
21  
HT903TA-A2_DZAFLLK_ENG_2926 2/12/08 3:25 PM Page 22  
22  

Xerox All In One Printer Pe120 User Manual
Toshiba Ras 10jkvp E User Manual
Sharp Mx M1100 User Manual
Sanyo 09khs71 User Manual
Ricoh D053 User Manual
NEC NP PA522U 02 User Manual
MIELE CVA 615 User Manual
LG LG D120 User Manual
BLACK DECKER GL933 User Manual
BLACK DECKER BDCF20 User Manual