•
•
The memory card can be easily damaged by improper
operation. Please be careful when inserting, removing, or
handling it.
Parts overview
To turn on the device, press and hold the Power
key for a few seconds.
Installing the SIM card and
memory card
In order for the water-resistant and dust-resistant features to
work effectively, the card tray must be inserted correctly.
1 Turn the phone off, insert the ejection pin into
the hole on the card tray and pull until the card
tray pops out.
Warning
•
Some memory cards may not be fully compatible with the
device. If you use an incompatible card, it may damage the
device or the memory card, or corrupt the data stored in it.
•
•
Be careful with the ejection pin since it has a sharp edge.
If you insert the card tray into your device while the card tray
is wet, your device may be damaged. Always make sure the
card tray is dry.
QUICk STArT GUIde
Emergency Alerts
You can choose which emergency alerts to receive
by changing the settings as follows.
1 Tap
>
.
2 Place the Nano SIM card or memory card on
the card tray with the gold contacts facing
downwards. Make sure that card is positioned as
shown below.
2 Tap > Settings to customize the emergency
alert features.
Nano SIM card
Nano SIM/Memory card tray
Volume keys (+/-)
Power/Lock key, Fingerprint sensor
NFC antenna area
Memory card
(optional-sold
separately)
Charger/USB cable port
NOTE
•
•
Always use a Nano SIM card supplied by your service provider.
Warning
For problem-free performance, it is recommended to use
the phone with the correct type of SIM card. Always use a
factory-made SIM card supplied by your service provider.
•
Your device has an internal rechargeable battery. For your
safety, do not remove the embedded battery.
U.S. Cellular®
Customer Care:
MBM65816101 (1.0) G
1-888-944-9400
|