WASHING
MACHINE
Please read this manual carefully before operating
your washing machine and retain it for future reference.
FH296WDL23 FH296HDL24
FH296WDL24 FH0B8WDL2
FH0B8NDL2
FH0B8NDL25
FH296HDL23
FH0B8WDL25
MFL67584549
P/NO : MFL67584549
Rev. No.: 00
6.0kg : [FH0B8NDL2 / FH0B8NDL25]
6.5kg : [FH0B8WDL2 / FH0B8WDL25 / FH296WDL23
FH296WDL24]
7.0kg : [FH296HDL23 / FH296HDL24]
No Spin/400/800/1000 [FH0B8NDL2 / FH0B8WDL2]
[FH0B8NDL25 / FH0B8WDL25]
No Spin/400/800/1200 [FH296WDL23 / FH296HDL23]
[FH296WDL24 / FH296HDL24]
carpeted floor.
subjected
in
caused
Unpacking
Cut the straps and open the upper flaps of Packing box & take out the Anti Rat Cover.
While taking out the Machine from packing, please take due care in removing packing
support given at centre of the base packing.
Anti Rat Cover is
placed below the upper
flaps of the Packing
box.
Packing Support
Anti Rat Cover installation
Accessories for fixing Anti Rat Cover.
1. Take out the poly bag (containing Screws/Washers).
2. Tilt the machine sideways.
3. Bend & insert the flaps of Anti Rat Cover into the bottom side of machine.
4. Assemble the Anti Rat Cover on the bottom side of the machine by using
Screws & Washers.
Machine.
5
adjustable legs
It is advisable to avoid, the usage of trolley & the movement of Washing Machine after installation.
As it may disturb the levelling of washer, which can create excessive noise & vibration.
6
(0.3~10kgf/cm²)
Part can be different according to different models.
Two rubber seals are provided
with inlet hose connectors.
These are used to prevent water
leakage.
Make sure the connection to tap
is sufficiently tight.
Check rubber seals in inlet hose
connectors.
Screw the hose connector onto
water supply tap.
Hose
Connector
Rubber
seal
- Intensive
- Pre Wash
[FH0B8NDL2 / FH0B8WDL2]
[FH0B8NDL25 / FH0B8WDL25]
[FH296WDL23 / FH296HDL23]
[FH296WDL24 / FH296HDL24]
• The Beep on/off function can be set
by pressing “Time delay + Crease care”
button simultaneously for three
seconds.
• The Beep on/off function can be set
at any time, and it is canceled by
pressing “Time delay + Crease care”
button simultaneously for three
seconds.
Part can be different according to different models.
[FH0B8NDL2 / FH0B8WDL2]
[FH0B8NDL25 / FH0B8WDL25]
[FH296WDL23 / FH296HDL23]
[FH296WDL24 / FH296HDL24]
By Pressing the Option Button, all Option
functions may be selected.
specific.
FH0B8NDL2
FH0B8NDL25
FH0B8WDL2
FH0B8WDL25
FH296WDL23
FH296WDL24
FH296HDL23
FH296HDL24
FH0B8NDL2 / FH0B8WDL2
FH0B8NDL25 / FH0B8WDL25
FH296WDL23 / FH296HDL23
FH296WDL24 / FH296HDL24
Close the door and press
Start/Pause button two times.
*Still, if
service.
is not released , call for
MFL67584549
|
Uniden Baby Monitor Ubr223 User Manual
Soleus Air Kfh 18 1 User Manual
MAKITA LS1040 User Manual
KENWOOD NX 1200D User Manual
Jensen Jsbw 210 User Manual
GE ASP14 User Manual
EPSON CO FH02 User Manual
EMERSON QUIET KOOL EATC12RE1 User Manual
EMERSON LE220EM3 User Manual
ACER D1P1822 User Manual